research paper - determination of anisotropy in impact toughness of aluminium alloy 2024 t3 plate -...
TRANSCRIPT
![Page 1: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/1.jpg)
Determination of Anisotropy in Impact Toughness of
Aluminium Alloy 2024 T3 Plate
Muhammad Habibullah SiddiquiCollege of Aeronautical Engineering, Risalpur, Pakistan
2013 IEEE Aerospace Conference, Big Sky, MT
![Page 2: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/2.jpg)
Sequence of Presentation
• Abstract
• Introduction
• Literature Review
• Experimental Work
• Experimental Results
• Discussion and Analysis
• Conclusion
2
![Page 3: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/3.jpg)
Abstract
• Aimed to quantify the existence of anisotropy in the impact toughness property of aluminium alloy 2024 T3 plate
• Results helpful in designing aircraft components• Charpy V notch Impact Toughness test utilised• Effect of specimen orientation was investigated• Research validated by comparison with known results• Maximum and minimum impact toughness orientations
were found• Error analysis was carried out
It was concluded that anisotropy in impact toughness does exist in Aluminium alloy 2024 T3 plate
3
![Page 4: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/4.jpg)
Introduction
• Usage of Aluminium Alloy 2024 T3
• Anisotropy; a physical property in metals and alloys
• An experiments-based research
• ASTM standard results taken as a reference
4
![Page 5: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/5.jpg)
Literature Review
• Pioneering work by Dr. Alimullah Khan (1963)
• This research investigates the actual behaviour of materials
• Cold working modifies the properties of materials
• Types of anisotropy as proposed by Klinger and SachsCrystallographic anisotropy
Anisotropy due to elongation
Anelastic anisotropy
• Using a mathematical approach, Hazlett verified the existence of anisotropy in Aluminium alloy 2024 T3 plate (1963) in theory
5
![Page 6: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/6.jpg)
Experimental Work (1/2)
• Charpy Impact Testing
• ASTM Standard E 23 was followed
• Plate Directions
6
![Page 7: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/7.jpg)
Experimental Work (2/2)
• Notch Direction
• Specimen Preparation
• Coding of Specimen
Orientation Symbol
L-S A
L-T B
T-S C
T-L D
7
![Page 8: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/8.jpg)
Experimental Results (1/4)
• Testing at Reference Laboratory
8
![Page 9: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/9.jpg)
Experimental Results (2/4)
• Results of the Experiments
9
SPECIMEN NO.
ABSORBED ENERGY (JOULES)
ORIENTATION
L-S(A) L-T(B) T-S (C) T-L(D)
1 15 9 20.5 162 15.5 10 20 153 15 9.5 19 164 13 11 20.1 16.55 14 10 21.46 16.876 15.5 10.5 19.95 167 16 10.11 18.81 16.238 15.6 9.52 20.79 15.99 15 10.7 19.1 16.23
10 17.51 11.29 19.5 15.611 16.1 10.1 20.79 16.8712 15.5 9.02 19.46 16.2313 14.6 9.9 19.83 16.2314 14.4 10.6 20.13 15.615 15.25 11 20.13 16.8716 13.96 11.29 20.13 16.8717 15.65 10.7 20.13 16.2318 14.23 11.2 20.13 16.23
MEAN 15.10 10.30 20 16.20ASTM VALUE 15 10 U/A U/A
![Page 10: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/10.jpg)
Experimental Results (3/4)
• Fractography of Notch Surfaces of each orientation
L-S L-T
T-S T-L 10
![Page 11: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/11.jpg)
Experimental Results (4/4)
• Visual Comparison of Fractured Surfaces
L-S L-T
T-S T-L11
![Page 12: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/12.jpg)
Discussion and Analysis (1/2)
• Reliable Results• Anisotropy successfully determined• Comparison with known results
12
![Page 13: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/13.jpg)
Discussion and Analysis (2/2)
• Error AnalysisPossible Causes of Error
Percentage errors of different orientations
13
![Page 14: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/14.jpg)
Conclusion
• Charpy Impact energy of different orientations was found different, hence anisotropy determined
T-S orientation of the plate exhibited maximum impact toughness
L-T orientation exhibited minimum impact toughness
• Results of research are reliable and valid
• Research can form a corner stone for further study
14
![Page 15: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/15.jpg)
Thank You
15
![Page 16: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/16.jpg)
Biographies (1/3)
• Muhammad Habibullah Siddiqui received his Bachelors degree in Aerospace Engineering from College of Aeronautical Engineering, National University of Sciences and Technology,Risalpur, Pakistan in 2008.
• Served as maintenance supervisor in an operational flight line for two years
• Currently, a part of an aircraft manufacturing facility
16
![Page 17: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/17.jpg)
Biographies (2/3)
• Dr. Fahim Hashmi is an Aerospace engineer by profession.
• Earned Masters and PhD from Beijing University of Aeronautics and Astronautics in the field of Materials Science and Engineering specializing in structural integrity assessment and failure analysis
• Formerly, served as Head of Aerospace Engineering Dept at College of Aeronautical Engineering, Risalpur, Pakistan
• Now, heading the Failure Analysis Centre at the School of Chemical and Materials Engineering, National University of Science and Technology, Islamabad, Pakistan
17
![Page 18: Research Paper - Determination of Anisotropy in Impact Toughness of Aluminium Alloy 2024 T3 plate - Presented in IEEE AeroConf 2013](https://reader037.vdocuments.us/reader037/viewer/2022102901/554c51dfb4c905282a8b4a82/html5/thumbnails/18.jpg)
Biographies (3/3)
• Mr. Ahmad Junaid is an Aerospace Engineer.
• Earned his BE (Aerospace) and MS (Structures) from College of Aeronautical Engineering, Risalpur, Pakistan. He has also served as an associate professor for five years in the same college.
• Presently, a part of the project planning office in an aircraft manufacturing facility.
18