Repositionable Woodworking Tapes

Easy to reposition

Reduces or eliminates clamping

Removes cleanly*

Tears easily by hand

Multi-purpose double sided tape for templates, jigs, pattern routing, planer or drum sander shaping, and the fixation or alignment of parts.

Ideal for professionals and all woodworkers!

*Adhesive may react differently to different substrates or wood types, test small surface area prior to use for adhesive residue and removability.

Wear ANSI approved safety glasses with side shields and gloves when cutting or handling wood or other materials. For projects generating dust or nuisance vapors, a NIOSH approved dust mask should also be worn.

Removable adhesive next to liner, permanent adhesive on the opposite side

Removable liner

DOUBLE SIDED TAPE

EuropeTieblokkenlaan 1B-2300 Turnhout BelgiumPhone: +32 (0)14 40 48 11Fax: +32 (0)14 40 48 55

South AmericaRua Francisco Foga, 22513280-000 Vinhedo SP BrazilPhone: +55 19 3876 7736Fax: +55 19 3876 7682

Asia PacificKunshan, China, NO. 618 Nanhe Road Kunshan Economic & Technological Zone China 215335 Phone: +86 512 57155001 Fax: +86 512 57155059

North America250 Chester StreetPainesville, Ohio 44077 USAPhone: +1 866-462-8379Fax: +1 888-358-4469

Please refer to Tapes.AveryDennison.com for complete terms and conditions, including warranty terms, relating to this product. You should periodically review the site as terms and conditions are subject to change without notice.

© 2014 Avery Dennison Corporation. All rights reserved. Fasson® and Avery Dennison® are registered trademarks of Avery Dennison Corporation. All other Avery Dennison brands, product names, antenna designs and codes or service programs are trademarks of Avery Dennison Corporation. ADV# AD 0125, 7/14, 150. Printed in U.S.A.

For more information on our bonding tapes and adhesive solutions, visit Tapes.AveryDennison.com

Instructions for use (machining applications)

1. Make sure all working surfaces are clean, dry and dust free.

2. Remove the tape roll from the re-sealable package and cut to the required length, return the roll to the package to keep it clean and protected.

3. Press the exposed adhesive side to the surface material or template where a semi-permanent bond is required, applying even pressure along the tape to remove air gaps.

4. Pull the liner backing off to expose the repositionable adhesive side.

5. Place the template onto your material or place the material to be machined directly onto the taped surface.

6. Verify alignment and positioning.

7. If not aligned properly, remove and reposition.

8. Proceed with the machine operation.

9. Remove the finished piece from the taped surface.

10. If the removable surface side of the tape is clean, reattach to the next part to be machined and repeat steps 6 to 10 making sure to test that the bond is strong enough to not slip during the machining process. The number of uses of the same piece of tape depends on how clean it remains. Do not repeat procedures if the adhesive does not hold properly.

Instructions for use (fixation of precisely aligned parts such as drawer fronts)

1. Make sure all working surfaces are clean, dry and dust free.

2. Remove the tape roll from the re-sealable package and cut to the required length, return the roll to the package to keep it clean and protected.

3. Press the exposed adhesive side to the surface material or template where a semi-permanent bond is required, applying even pressure along the tape to remove air gaps.

4. Pull the liner backing off to expose the repositionable adhesive side.

5. Place the part to be attached (like a drawer front) onto the tape surface.

6. Verify alignment and positioning.

7. If not aligned properly, remove and reposition.

8. Attach the two parts permanently with a mechanical fastener.

Tape can be doubled or tripled if there is a gap due to uneven or warped surfaces.