report of electrical engineering for the period april …
TRANSCRIPT
REPORT Of
ELECTRICAL
ENGINEERING FOR
THE PERIOD APRIL-JULY, 2020
LONG TERM PROGRAMMES
ME Electrical Engineering (Instrumentation & Control)
Regular Batch 2019 Second semester
Lectures / Course materials/ e-content/ e book/ assignment /
question hour session/ Query session have been provided to
students through Google Classroom and ZOOM/Google Meet
during April – June 2020, for the following subjects by the
respective faculty members.
(i) Soft Computing Techniques – Dr. Lini Mathew
(ii) Power System Analysis – Dr. Piush Verma
(iii) Optoelectronic Instrumentation – Dr. Poonam Syal
(iv) Microcontroller based Embedded Systems – Dr. Ritula Thakur
(v) Advanced Control Theory – Dr. Lini Mathew
ME Electrical Engineering (Instrumentation & Control)
Modular Batches of 2018 and 2019
Lectures / Course materials/ e-content/ e book/ Assignments/
Question hour session/ Query session have been
provided to students through Webex during June- August
2020 for the following subjects by the respective faculty
members.
(i) Soft Computing Techniques – Dr. Lini Mathew
(ii) Virtual Instrumentation – Dr. Lini Mathew
Scholars in Ph.D Programme
Dr. Lini Mathew
1) Mr. Amandeep Sharma Submitted in June 2020
2) Ms Anjali A Bhatnagar Report writing in progress
3) Mr. Kuldeep Singh
4) Ms. Preeti Kumari
5) Ms. Mohini Gunjal
Dr. Piush Verma
1) Mr. Raj Kumar Saini Submitted in July 2020
2) Ms. Loveleen Kaur
Dr. Poonam Syal
1) Mr. Shivaji Thube
Dr. Ritula Thakur
1) Mr. Shivaji Karad
SHORT TERM PROGRAMMES
• In Contact Mode NIL
• In ICT Mode 11
S.
No
Title of STC Dates No. of
participa
nts
Course
Coordinator
1. 8051 Microcontroller and
its Applications
27.04.2020 to
01.05.2020
176 Dr. Ritula
Thakur.
2. Teaching and Learning for
Accreditation in Technical
Education
27.04.2020 to
01.05.2020
390 Dr. Piush
Verma
3. MATLAB Programming 11.05.2020 to
15.05.2020
172 Dr. Lini
Mathew
4. 8051 and its Applications 18.05.2020 to
22.05.2020
163 Dr. Ritula
Thakur
S.
No
Title of STC Dates No. of
participa
nts
Course
Coordinator
5. Leadership and Team-
Work for Performance
Excellence Education
18.05.2020 to
22.05.2020
253 Dr. Piush
Verma
6. Programming using
MATLAB
08.06.2020 to
12.06.2020
211 Dr. Lini
Mathew
7. Real World Applications of
Microcontrollers
15.06.2020 to
19.06.2020
160 Dr. Ritula
Thakur
8. Artificial Neural Networks
and Fuzzy Logic
22.06.2020 to
26.06.2020,
216 Dr. Lini
Mathew
9. Advances in Electrical &
Electronics Engineering
18.07.2020 to
22.07.2020
83 Dr. Piush
Verma
S.
No
Title of STC Dates No. of
particip
ants
Course
Coordinator
10
.
Nanosciences for
Engineering
Applications
22.06.2020 to
26.06.2020 jointly
with Dr. B R
Ambedkar NIT
Jalandhar
145 Dr. Piush
Verma
11. Artificial Intelligence
and its Applications -
27.07.2020 to
31.07.2020 jointly
with Dr.B R
Ambedkar NIT
Jalandhar
198 Dr. Piush
Verma
Man Power trained in STCs = 2167
{ManPower of a STC=No of participants * Duration of STC in week}
INSTRUCTIONAL RESOURCES DEVELOPED
Preparation of course contents for the following Higher
Modules
(i) HM-01 Institutional Governance and Development
(ii) HM-03 Institutional Collaboration for Research &
Innovation Dr.Piush Verma
Prepared three video films titled (i) How to attend Webex
training session (ii) How to conduct Webex training session
and (iii) How to schedule Webex training session -
Dr.Ritula Thakur
RESEARCH AND DEVELOPMENT
Research Project Submitted
1. Project Proposal submitted on “Integrated Yoga Therapy
Intervention based on ECG and EEG Perspective” to
Department of Science and Technology,
Dr. Ritula Thakur and Dr. Piush Verma.
2. Project Proposal submitted on “Framework and
Methodology for Predictive Lung Deposition Estimation
using Low Cost Sensors” to Department of Science and
Technology,
Dr. Piush Verma.
S.N
o
Title of Thesis Name of Student Name of
Supervisor
1. Hardware Implementation of
Single-Phase Five-Level,
Seven-Level and Nine-Level
Inverters with Reduced
Number of Switches
Sumit Kumar Rai
Batch Regular
2017, on
11.07.2020
Dr. Lini Mathew
1. Investigation on Controlled
Techniques For LED
Lightning Systems
Shankar Lal
Sharma
Batch Modular
2015, on
12.06.2020
Dr. Ritula
Thakur
Details of the Dissertation for Masters Degree
Programme
Final Thesis Completed
Preliminary Thesis Completed
S.
No
Title of Thesis Name of Student Name of
Supervisor
1. Online Incipient Fault
Diagnosis Of Induction
Motors Using Motor
Electrical Signature
Analysis
Amandeep Sharma
Submitted in June
2020 to Punjab
University (PU),
Chandigarh
Dr. Lini Mathew
2. Design and Performance
Optimization of Three
Phase Squirrel Cage
Induction Motor for Rural
Area Applications
Raj Kumar Saini
Submitted in July
2020 to University of
Petroleum and
Energy Studies
(UPES), Dehradun.
Dr. Piush Verma
Details of Dissertation for Ph.D - Submitted
CURRICULUM DEVELOPMENT
Dr. Lini Mathew attended the workshop for Design
and Development of NSQF Compliant Diploma level
Programme in Electrical Engineering (full time/part-time)
on 10th July, 2020 for BTE, Delhi.
EXTENSION SERVICES AND CONSULTANCY
1. Dr. Lini Mathew acted as external examiner, evaluated two PhD theses and attended the Oral Examination (i) Dr. Parvesh Saini, Graphic Era University, Dehradun (ii) Dr.Varada Jayant Tambe, M.S.University, Baroda
2. Dr. Ritula Thakur took two expert lectures on “Role of Embedded Engineers in Green Engineering” in TEQIP III sponsored ICT enabled FDP on Energy Conservation and Management conducted by Electrical Engineering Department, Guru Nanak Dev Engineering College, Ludhiana from May 4-8,2020.
3. Memorandum of Understanding (MoU) signed by NITTTR Chandigarh and NIT Jalandhar in the Month of January 2020 - Dr.Piush Verma
– 3 STC conducted
– International conference on Futuristic Multidisciplinary Approach in Engineering and Technology in the month of December. 2020.
– one Summer School in September 2020
1. Proposal submitted to set up distinct skill Development and
Vocational Training Unit - A joint effort by NITTTR and Skill
Development Council of India (SDCI), Dr.Piush Verma, Dr. Lini
Mathew
2. Proposal submitted to UGC to start the following three courses
and prepared the scheme of examination and course contents
(i) M.E. Smart Grid (ii) M.E. in Energy and Environmental
Management (iii) P. G. Diploma Electrical Engineering (Electric
Vehicle) Dr.Lini Mathew, Dr. Piush Verma, Dr. Ritula Thakur
3. Proposal submitted to UGC to start PG Diploma in Mobile
Communications in association with industry partner TSSC - A
joint effort by NITTTR and Industry partner TSSC, Dr.Piush
Verma and Dr. Lini Mathew, Dr. Ritula Thakur
RESEARCH PAPER PUBLICATION: NO. OF PUBLICATIONS
SCI routine
Journals
Scopus
index
Journals
UGC/ AICTE
Approved
Journals
Any Other
Journals
Total
1 3 Nil Nil 4
No. of Papers
presented in
International
Conferences
No. of Papers
published in
International
Conferences
No. of Papers
presented in
National
Conferences
No. of Papers
published in
National
Conferences
1 Nil Nil
Details of the papers
1. Amandeep Sharma, Lini Mathew, Shantanu Chatterji, Deepam Goyal,
“Artificial Intelligence based Fault Diagnosis for Condition Monitoring of
Electric Motors” International Journal of Pattern Recognition and
Artificial Intelligence, Vol.34, No.3, 2020. Pages: 2059043-1 to
2059043-30 DOI: 10.1142/S0218001420590430. (SCI-E Indexed)
2. Md Zahid Hassnain, Ritula Thakur, “Different Techniques of Fault
Detection in Electrical Equipment”, International Journal of Advanced
Science and Technology, Vol.29, No.7, 2020. (Scopus Indexed)
3. Raj Kumar Saini, Devender Kumar Saini, Rajeev Gupta, Piush Verma,
R.P.Dwivedi, Neeraj Gandotra, Robin Thakur, Ashwani Sharma,
“Performance Improvement of Three Phase Squirrel Cage Induction
Motor Operating Under Rated Voltages- A Design Consideration for Rural
Areas” Advances in Intelligent Systems and Computing, Vol.989, page
1-11, 2020. (Scopus Indexed)
4. Anamika, Lini Mathew, “Maximum Power Point Tracking of a Hybrid
PV-Wind–Diesel System for Micro Grid”, International Journal of
Innovative Technology and Exploring Engineering (IJITEE) ISSN:
2278-3075, Volume-9, Issue-6, April 2020 (Scopus Indexed)
5. Sumit Kumar Rai, Shimi S.L, Lini Mathew, “Implementation of
Modified Five Level Inverter using Reduced Number of Switches”,
Electric Power and Renewable Energy Conference-2020
(EPREC-2020), NIT Jamshedpur, May 2020. Springer Lecture
Notes in Electrical Engineering (LNEE) (Scopus-indexed).
6. Sumit Kumar Rai, Shimi S.L, Lini Mathew, “Software and
Hardware Implementation of 9 level Inverter with Low Component
Count”, accepted for virtual presentation at IEEE Industrial
Electronics Society (IES) 46th Annual Conference IECON2020 to
be held at Marina Bay Sands Expo and Convention Centre,
Singapore during October 18-21, 2020
PATENTS
Patent filed - Indian Patent Application No. 202011003964,
Title : Multilevel Inverter was filed on January 29, 2020, in the
name of NATIONAL INSTITUTE OF TECHNICAL
TEACHERS TRAINING AND RESEARCH
[V & A Ref: 1779-P-02-IN/TIFAC Ref: T.I. (59)/TIFA/2018],
Inventors : Mr. Rohit Kumar and Dr. Shimi Sudha Letha.
1. The following faculty members attended the ‘Capacity Building
Programme – Module 3 - Communication Skills, Modes and
Knowledge Dissemination’ of AICTE-NITTTR Modules during
May 26 – 30, 2020 - Dr. Lini Mathew, Dr. Piush Verma, Dr.
Ritula Thakur
2. The following faculty members attended the ‘Capacity Building
Programme – Module 5 and 6 - Technology Enabled Learning
and Lifelong Self-Learning of AICTE-NITTTR Modules during
June 9 – 13, 2020 - Dr. Piush Verma, Dr. Ritula Thakur
3. Conducted 5 days webinar series on Aatm Nirbhar Bharat
Abhiyaan as Team Member and also Incharge of Pillar 4 on
“Ushering Vibrant Demography” - Dr. Ritula Thakur
OTHER ACTIVITIES
4. Dr. Ritula Thakur attended following online webinars conducted
by SEECE Galgotias University:
– Role of the Smart Grid in Facilitating the Integration of
Renewables on 27th July 2010
– Artificial Intelligence in Cloud Computing and IoT on 18th July
2020
– Nuances of Scientific Publishing on 18th July 2020
5. Dr. Lini Mathew associated in Review of video lectures of faculty
members of Electrical Engineering Department of Maharaja
Ranjit Singh Punjab Technical University, Bathinda.
ACTIVITIES FOR THE
PERIOD AUGUST 2020 - JANUARY, 2021
LONG TERM PROGRAMMES
• ME Electrical Engineering (Instrumentation & Control)
Regular Batch 2019 Third semester
• Regular Batch 2020 First semester
• ME Electrical Engineering (Instrumentation & Control)
Modular Batches of 2018, 2019 and 2020
• Supervision of Theses of students of different batches of
Modular and Regular
• M.Sc in Energy Systems and Management
(in collaboration with the Applied Science Department)
SHORT TERM COURSES
i. Bio-inspired Optimisation
ii. Distributed Generation and Micro-grid
iii. Image Processing
iv. Recent Advances in Electrical Engineering
v. Embedded Systems & IoT
INDUSTRY ORIENTED COURSES
i. Electrical Vehicle Technology
ii. Renewable Energy
iii. Real Time Simulation & HIL Simulations of Microgrid, Smart Grid
and Renewable Sources (in collaboration with Opal RT)
iv. Applications of HIL in Electrical Engineering (in collaboration with
Typhoon HIL)
SKILL BASED COURSES
i. Arduino based Application Projects
ii. Diagnostic Study of Transformers
iii. PLC and its Applications
INSTRUCTIONAL MATERIAL DEVELOPMENT
• NRC MOOCS COURSE
IoT Driven Embedded Systems Applications
Coordinator - Dr. Ritula Thakur
• PREPARATION OF VIDEOS
Arduino Based Experiments
Coordinators - Dr. Ritula Thakur/ Er. Ashish Mahajan
IN-HOUSE PRODUCT DEVELOPMENT
ENERGY AUDIT OF NITTTR CHANDIGARH, CAMPUS
Team - Dr. Piush Verma, Dr. Lini Mathew, Dr.Ritula Thakur
Methodology to be Adopted
• Formation of audit groups for specific areas and end use
• Visual inspection and data collection
• Observations on the general condition of the facility and
equipment & quantification
• Identification / verification of energy consumption and other
parameters by measurements
• Detailed calculations, analyses and assumptions
• Validation
• Potential energy saving opportunities
• Implementation
THANKYOU