replacing the maintenance kit
DESCRIPTION
Replacing the Maintenance Kit. HP Printers OIT lab services. Parts of the Maintenance Kits. The Fuser Feed/Pickup Rollers The Transfer Roller. Exit. Accessing the Parts. Top Cover Transfer Roller. Left Door Fuser. Paper Tray Feed/Pickup Rollers. Resetting the page count. Exit. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/1.jpg)
Replacing the Maintenance Kit
HP Printers
OIT lab services
![Page 2: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/2.jpg)
Parts of the Maintenance Kits
1. The Fuser
2. Feed/Pickup Rollers
3. The Transfer Roller
Exit
![Page 3: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/3.jpg)
Accessing the Parts
Top CoverTransfer Roller
Paper TrayFeed/Pickup Rollers
Left DoorFuser
ExitResetting the page count
![Page 4: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/4.jpg)
Removing the Fuser
• Open the left door• Remove the duplexer
by pushing down on the green tab and slide it out.
Exit
![Page 5: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/5.jpg)
Removing the Fuser
• Release the fuser by turning the blue levers down.
• Don’t turn the gray levers downward.
• Use the finger tabs, lift the fuser up and slide it out of the printer.
Blue Lever Finger Tab
Exit
![Page 6: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/6.jpg)
Replacing the Fuser
• Remove the orange packing spacers (one on each side) from the new fuser.
• Slide the new fuser firmly into place.
• Be sure it is pushed in the printer beyond the lip of its supporting frame and is completely seated.
Exit
![Page 7: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/7.jpg)
Replacing the Fuser
• Rotate the blue levers up to lock the fuser in place.– Repeat step 8 if levers do not rotate.
• Reinstall the duplexer.• Push the duplexer into the printer until it
locks in place. You will hear a clicking sound.
• Close the left door.
Exit
![Page 8: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/8.jpg)
Accessing the Feed Rollers
• The feed rollers are inside the paper tray area
• Open tray 2 and pull it out until it stops.
• Remove the tray by lifting up while pulling the tray away from the printer.
• Repeat above steps for tray 3.
Exit
![Page 9: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/9.jpg)
Removing the Feed Rollers
• Pinch the protruding tab
• Slide the roller off the shaft
• Replacement is the reverse of installation.
• Slide the new rollers onto each shaft until they click into place.
Exit
![Page 10: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/10.jpg)
The Transfer Roller
• Open the top cover and remove the toner cartridge
• The transfer roller is located under the toner
• Caution: To prevent damage to the roller DO NOT touch the black foam roller.
Exit
![Page 11: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/11.jpg)
Remove the Transfer Roller
• Grasp the blue gear on the left and lift it up just enough to clear the retainer clip.
• Slide the transfer roller left to release the right end.
• Remove the transfer roller assembly.
Exit
![Page 12: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/12.jpg)
Replace the Transfer Roller
• Place the right end of the new shaft into the hole on the right side.
• Slide the roller to the right until the blue gear on the left is in place.
• Snap the blue gear into place.
Exit
![Page 13: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/13.jpg)
Lock the Roller Guide
• Press the metal and black plastic guide until it snaps into place.– Note: If the guide is not
snapped into place jams will occur.
• Replace toner cartridge and close top cover and close the top cover.
Exit
![Page 14: Replacing the Maintenance Kit](https://reader035.vdocuments.us/reader035/viewer/2022062314/5681428a550346895daeb4ff/html5/thumbnails/14.jpg)
Resetting the Page Count
• Close up the printer and turn the power on.
• At this point, reset the page count and printer message.
• For more information on resetting the page count visit the LM page.
Exit