rental guide pdf
TRANSCRIPT
RENTAL GUIDE
Largest Independent Rental Fleet in the Midwest!
One Call Rents It All! 815-941-1900
Over 1,000 Units Available for Rent!
Revised 6/2017
www.iltruck.com2
AUTHORIZED DEALER FOR:
Providing Easy Answers to
a Demanding Industry!
TOTAL RENTAL
SOLUTIONS
MAKE MODEL HP LIFT CAPACITY DAY WEEK 4 WEEK
N.H. L220 60 2,000 lbs. $200 $600 $1,800N.H. L223 74 2,250 lbs. $250 $750 $2,250N.H. L228 82 2,500 lbs. $250 $750 $2,250N.H. L230 90 3,000 lbs. $285 $850 $2,500N.H. L230 Hi Flow Unit $350 $1,000 $3,000
WHEELED SKID STEERS
DESCRIPTION DAY WEEK 4 WEEK
Hydraulic Auger w/1 bit $125 $300 $900Extra Bit $50 $150 $450Auger Extensions $15 $45 $135Hydraulic Concrete Breaker $195 $585 $1,750Pallet Forks $35 $100 $300Blue Diamond Grapple Forks 60" $85 $250 $750AMI Mat Grapple Forks 72" $125 $350 $1050Trencher $150 $450 $1,350Grapple Bucket 83" $125 $350 $1,050Rock Bucket 84" $100 $300 $900Harley Box Rake 84" $150 $450 $1,350FFC Auto Rake 76" $200 $585 $1,750
SKID STEER ATTACHMENTS
MAKE MODEL HP LIFT CAPACITY DAY WEEK 4WEEK
Toro TX1000 18 1,000 lbs. $250 $750 $2,250N.H. C227 74 2,700 lbs. $300 $900 $2,700N.H. C232 76 3,200 lbs. $325 $975 $2,925N.H. C238 90 3,800 lbs. $375 $1,125 $3,375N.H. C238 Hi Flow Unit $465 $1,400 $4,200Bobcat T870 99 5,030 lbs. $465 $1,400 $4,200
TRACK SKID STEERS
New Holland L230
New Holland C238
DESCRIPTION DAY WEEK 4 WEEK
Pick Up Broom* $150 $450 $1,350Angle Push Broom* $150 $450 $1,350Brush Cutter 72"* $200 $585 $1,750Rezloh Edge $50 $100 $250Hard Rubber Tires** $75 $225 $675LaBounty MSD7R Shear*** n/a $1,250 $3,750Burchland Silt Fencer 72" $175 $525 $1,575Trench Grader - 18" Vibratory Trench Compactor
$175 $575 $1,575
Fecon BH7455 Mulcher**** $400 $1,200 $3,600FFC Cold Planer 30" High Flow $400 $1,200 $3,6008' Snow Push Box n/a n/a $695
*** 10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater. **** Customer responsible for broken/missing teeth.
* Bristle wear charged at $125 per inch. * Customer responsible for damaged blades. ** Installation and damage charges additional.
Grapple Forks
Brush Cutter
815-941-1900 [email protected] 3
MAKE MODEL HP CAPACITY DAY WEEK 4 WEEK
N.Holland W-80B TC 82 1.44 yds. $350 $1,050 $3,150Kawasaki 65ZV-2 154 2.5 yds. $465 $ 1,395 $4,150Kawasaki 70Z7 173 3.4 yds. $550 $ 1,650 $4,950Kawasaki 80Z7 200 4.2 yds. $675 $ 2,000 $6,000Caterpillar IT-62H 230 4.25 yds. $800 $ 2,400 $7,200Kawasaki 85Z7 249 4.5 yds. $800 $ 2,400 $7,200Kawasaki 90Z7 295 5.0 yds. $1,000 $ 3,000 $9,000Kawasaki 95Z7 389 8.1 yds. $1,350 $ 4,000 $12,000Kawasaki 95Z7 XTreme 389 9.8 yds. $1,500 $ 4,500 $13,500Kawasaki 115ZV-2 532 8.5 yds. n/a $ 5,500 $16,500
WHEEL LOADERS
• Hydraulic quick coupler machines available.
MAKE MODEL HP CAPACITY DAY WEEK 4 WEEK
Caterpillar 953D 148 2.42 yds. $725 $2,175 $6,500Caterpillar 963D** 189 3.2 yds. $950 $2,850 $8,500Caterpillar 973D** 263 4.2 yds. $1,250 $3,750 $11,250
CRAWLER LOADERS
TYPE MAKE/MODEL DAY WEEK 4 WEEK
Forks Cat 420/430 $50 $150 $450Extra Backhoe Bucket Cat 420/430 $35 $100 $300FFC/Sweepster* 8' Angle Broom $150 $450 $1,350Allied Plate Compactor** Ho-Pac 1000B $195 $585 $1,750Allied Hammer*** Rammer 777 $350 $1,000 $2,250
BACKHOE LOADER ATTACHMENTS
MAKE MODEL HP CAPACITY DAY WEEK 4 WEEK
Caterpillar 420F 100 1.4 yd. Loader, 17' 9" Dig Depth
$300 $900 $2,700
Caterpillar 420EIT 101 1.3 yd. Loader, 17' 9" Dig Depth
$300 $900 $2,700
Caterpillar 430EIT 97 1.5 yd. Loader, 19' 6" Dig Depth
$375 $1,125 $3,375
Caterpillar 430F 117 w/Hydraulic Thumb
$395 $1,175 $3,500
BACKHOE LOADERS
* Quick coupler unit available w/forks.** Ripper units available.
* Bristle wear charged at $125 per inch. ** Customer is responsible for all jumper line damage & repair. ** Customer is responsible for isolator replacement. *** Customer is responsible for greasing hammer at recommended intervals. *** Customer is responsible for all hydraulic hose damage and repair. *** Customer is responsible for all tool repair and damage.
CAPACITY DAY WEEK 4 WEEK
Forks 65Z/70Z $95 $250 $750Forks 80Z/85Z $125 $350 $1,000Forks 90Z/95Z $125 $350 $1,000Pipe Clamp Forks 80Z7/85Z7 $350 $1,000 $3,000Grapple Forks 65Z/70Z $225 $675 $2,000Grapple Forks 90Z/95Z $625 $1,850 $5,500Angle Broom 65ZV2/70ZV7* $250 $750 $2,000Angle Broom IT62-H* $250 $750 $2,000Jib Boom 65ZV2/70Z7 $50 $150 $450Jib Boom 80Z7/85Z7 $75 $225 $675Jib Boom 90Z7/95Z7 $125 $350 $1,00014' Snow Push Box n/a n/a $1,150
WHEEL LOADER ATTACHMENTS
* Bristle wear charged at $125 per inch.
Caterpillar 420F
TYPE MAKE/MODEL DAY WEEK 4 WEEK
Quick Attach Forks Cat 963D $125 $350 $1,000
CRAWLER LOADER ATTACHMENTS
Kawasaki 95Z7 Xtreme
Caterpillar 973D
Jib Boom
Forks
www.iltruck.com4
MAKE MODEL HP BOOM LIFT CAPACITY WEIGHT DAY WEEK 4 WEEK
Caterpillar D5K LGP 99 Midwestern Side Boom M520C 20,000 lbs. 21,300 lbs. $675 $2,000 $6,000 Caterpillar D6K LGP 99 Midwestern Side Boom M540C 40,000 lbs. 39,000 lbs. $890 $2,675 $8,000
PIPELAYERS / SIDE BOOMS
MAKE MODEL HP WEIGHT DAY WEEK 4 WEEK
Caterpillar D3K XL/LGP 81 17,800 lbs. $375 $1,125 $3,375Caterpillar D4K XL/LGP* 92 18,700 lbs. $425 $1,250 $3,750Caterpillar D5K XL/LGP* 100 21,300 lbs. $500 $1,500 $4,500Caterpillar D6K XL* 125 28,400 lbs. $585 $1,750 $5,250Caterpillar D6K LGP* 125 29,700 lbs. $650 $1,925 $5,750Caterpillar D6N XL 145 36,000 lbs. $750 $2,250 $6,750Caterpillar D6N LGP* 145 40,000 lbs. $825 $2,475 $7,400Caterpillar D6T XL 228 44,000 lbs. $950 $2,850 $8,500Caterpillar D6T XW** 228 46,000 lbs. $1,000 $3,000 $9,000Caterpillar D6T XW PAT** 228 46,000 lbs. $1,000 $3,000 $9,000Caterpillar D6T LGP** 228 48,300 lbs. $1,100 $3,175 $9,500Caterpillar D6T LGP PAT** 228 48,300 lbs. $1,100 $3,175 $9,500Caterpillar D8T** 347 85,000 lbs. n/a $5,175 $15,500Caterpillar D10R 570 146,000 lbs. n/a n/a $27,500
DOZERS
MAKE MODEL HP SPECS DAY WEEK 4 WEEK
Caterpillar D5K/XL/LGP 100 Winch Unit $925 $2,300 $6,900 Caterpillar D6K/XL/LGP 125 Winch Unit $1,100 $2,750 $8,250Caterpillar D6N/XL/LGP 145 Winch Unit $1,325 $3,300 $9,900Caterpillar D6T XL* 228 Winch Unit $1,550 $3,850 $11,500Caterpillar D6T XW* 228 Winch Unit $1,600 $4,000 $12,000Caterpillar D6T LGP* 228 Winch Unit $1,675 $4,175 $12,500Caterpillar D8T* 347 Winch Unit $2,350 $5,850 $17,500
WINCH DOZERS
• Units subject to $195 cable inspection upon return. * Angle blades available.
* Accugrade and Top Con ready machines available. ** Ripper machines available.
Caterpillar D6T LGP
Caterpillar D8T LGP w/Allied Winch
Midwestern M520CMidwestern 540C
DESCRIPTION DAY WEEK 4 WEEK
Base Station & Rover $450 $1,350 $4,000Machine Control $575 $1,675 $5,000
GPS BASE STATION AND MACHINE CONTROL
• 3D modeling available at additional charge. • Set-up charge applies.
• Units subject to $195 cable inspection upon return. • Customer responsible for any and all cable damage. • On-site assembly charges may apply.
815-941-1900 [email protected] 5
MODEL ATTACHMENT DAY WEEK 4 WEEK
SK17SR-SK80CS Bucket $35 $100 $300SK140-SK170 Bucket $80 $160 $480SK210-SK260 Bucket $100 $200 $600SK295-SK500 Bucket $125 $250 $750SK140 Frost Ripper $80 $160 $480SK210-SK235 Frost Ripper $100 $250 $750SK295-SK350 Frost Ripper $135 $300 $900
EXCAVATOR BUCKETS / RIPPER ATTACHMENTS
MAKE MODEL HP DIG DEPTH WEIGHT DAY WEEK 4 WEEK
Kobelco SK17SR 15 7'1" ft. 3,650 lbs. $200 $600 $1,800Kobelco SK35SR 28 10'1" ft. 7,960 lbs. $250 $750 $2,250Kobelco SK45SR 39 11'3" ft. 10,300 lbs. $275 $825 $2,475Kobelco SK55SRX 39 12'10" ft. 12,295 lbs. $300 $900 $2,700
KOBELCO MINI EXCAVATORS
* Push blade units available.
Kobelco SK35SR
MAKE MODEL HP REACH DAY WEEK 4 WEEK
Kobelco SK210 LC 157 50 ft. $1,075 $ 3,175 $9,500Kobelco SK260 LR 176 59 ft. $1,175 $3,500 $10,500Kobelco SK295 LC 197 63 ft. $1,400 $4,175 $12,500
LONG REACH EXCAVATORS
Kobelco SK295 LR
• Units subject to bucket pin & bushing inspection upon return. • Customer responsible for excessive bucket pin & bushing wear.
Caterpillar M322D
* Twist-O-Wrist bucket available. * Hydraulic hammer available. • Pipe shoe(s) not included.
MAKE MODEL DAY WEEK 4 WEEK
Vacuworx MC5B w/Remote $550 $1,585 $4,750Vacuworx RC-10 w/Remote $625 $1,875 $5,625
EXCAVATOR PIPELIFTER ATTACHMENTS
Vacuworx RC-10
MAKE MODEL HP WEIGHT DAY WEEK 4 WEEK
Caterpillar M322D* 173 47,400 lbs. $1,075 $3,200 $9,500
WHEELED EXCAVATORS
Excavator Bucket
Kobelco SK500
Kobelco SK140SR LC w/Rubber Tracks/Push Blade
MAKE MODEL HP WEIGHT DAY WEEK 4 WEEK
Kobelco SK85CS 56 17,600 lbs. $425 $1,250 $3,750Kobelco SK140SR LC* 94 32,040 lbs. $500 $1,500 $4,500Kobelco SK140SR LC*
w/Rubber Track Pads94 32,040 lbs. $635 $1,900 $5,350
Kobelco SK140SR LC* w/Offset Boom
94 32,040 lbs. $575 $1,675 $5,000
Kobelco SK170 LC 121 37,800 lbs. $575 $1,675 $5,000Kobelco SK210 LC 150 47,100 lbs. $675 $2,000 $6,000Kobelco SK230SR LC 157 55,500 lbs. $785 $2,350 $7,000Kobelco SK235SR LC 153 57,500 lbs. $800 $2,425 $7,250Kobelco SK260 LC 176 56,890 lbs. $850 $2,500 $7,500Kobelco SK270SR 160 60,000 lbs. $850 $2,500 $7,500Kobelco SK300 LC 252 68,100 lbs. $950 $2,850 $8,500Caterpillar 328D LCR 204 73,500 lbs. $1,075 $3,175 $9,500Kobelco SK350 LC 238 79,600 lbs. $1,075 $3,175 $9,500Kobelco SK500 LC 345 111,400 lbs. $1,500 $4,500 $13,500Kobelco SK850 LC 500 177,000 lbs. n/a n/a $25,000
KOBELCO EXCAVATORS
• Additional fee to weld plate over teeth.
www.iltruck.com6
MAKE MODEL HP WEIGHT ATTACHMENT DAY WEEK 4 WEEK
Kobelco SK55SRX 39 12,295 lbs. Hydraulic Thumb $375 $1,075 $3,250Kobelco SK85CS 56 17,600 lbs. Hydraulic Thumb $450 $1,350 $4,050Kobelco SK140SR LC 94 32,100 lbs. Hydraulic Thumb/Grapple $635 $1,900 $5,350Kobelco SK170 LC 121 37,800 lbs. Hydraulic Thumb/Grapple $750 $2,175 $6,500Kobelco SK210 LC 150 47,800 lbs. Hydraulic Thumb/Grapple $850 $2,500 $7,500Kobelco SK235SR LC 153 57,500 lbs. Hydraulic Thumb/Grapple $975 $2,925 $8,750Kobelco SK260 LC 176 56,890 lbs. Hydraulic Thumb/Grapple $1,050 $3,125 $9,375Kobelco SK295 LC 197 66,800 lbs. Hydraulic Thumb/Grapple $1,200 $3,600 $10,500Kobelco SK350 LC 264 79,600 lbs. Hydraulic Thumb/Grapple $1,300 $3,850 $11,500Kobelco SK500 LC 345 111,400 lbs. Hydraulic Thumb/Grapple n/a n/a $16,500
EXCAVATORS WITH THUMBS OR GRAPPLES
• Customer is responsible for all damage and excessive wear to thumbs/grapples.
MAKE MODEL HP WEIGHT ATTACHMENT WEEK 4 WEEK
Kobelco SK210 LC 150 47,800 lbs. LaBounty MSD1500R $7,000 $14,000Kobelco SK350 LC 264 79,600 lbs. LaBounty MSD2500R $10,750 $21,500Kobelco SK500 LC 345 111,400 lbs. LaBounty MSD3000R $12,000 $24,000
EXCAVATORS WITH SHEARS 2ND MEMBER
• Customer is responsible for all jumper line damage & repair. • Price does not include blade wear, tooth wear and maintenance. • 10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
MAKE MODEL HP WEIGHT ATTACHMENT WEEK 4 WEEK
Kobelco SK350 LC 254 79,600 lbs. Geith GT80 $4,500 $13,500
EXCAVATORS WITH CONCRETE PULVERIZERS
• Price does not include blade wear or tooth wear.
Kobelco SK235SR w/TAG Thumb
Kobelco SK210w/LaBounty Grapple
Kobelco SK350 w/Pulverizer
AMI Mat Grapple
Kobelco SK485 w/Shear
• Customer is responsible for all damage, excessive wear & jumper line damage.
MAKE MODEL HP ATTACHMENT WEEK 4 WEEK
Kobelco SK210 LC 150 AMI GR3345 $3,250 $9,500
EXCAVATORS WITH MAT GRAPPLES
MAKE MODEL HP WEEK 4 WEEK
Kobelco SK210 LC 150 $3,500 $11,000
EXCAVATORS WITH CLAMSHELL BUCKET
Ransome YC-1000 Clamshell Bucket
• Customer is responsible for all damage, excessive wear & jumper line damage.
815-941-1900 [email protected] 7
Kobelco SK140SR LC w/Rammer Hammer
MAKE MODEL HP WEIGHT ATTACHMENT DAY WEEK 4 WEEK
Kobelco SK85CS 56 17,600 lbs. Blue Diamond 50" $650 $1,925 $5,750
EXCAVATORS WITH BRUSH CUTTER
• Customer is responsible for all jumper line damage & repair. • Price does not include blade wear, tooth wear and maintenance. • 10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
MAKE MODEL HP WEIGHT ATTACHMENT PLATE SIZE DAY WEEK 4 WEEK
Kobelco SK55SRX 39 12,295 lbs. Allied Ho-Pac 500B 13" x 27" $400 $1,200 $3,600Kobelco SK85CS 56 17,600 lbs. Allied Ho-Pac 1000B 24" x 28" $525 $1,575 $4,775Kobelco SK140SR LC 94 32,100 lbs. Allied Ho-Pac 1600VMS 29" x 32" $675 $2,085 $6,250Kobelco SK170 LC 121 37,800 lbs. Allied Ho-Pac 1600VMS 29" x 32" $800 $2,425 $7,250Kobelco SK210 LC 150 47,800 lbs. Allied Ho-Pac 2300VMS 34" x 36" $900 $2,750 $8,250Kobelco SK230SR LC 157 55,500 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,025 $3,100 $9,250Kobelco SK235SR LC 153 57,500 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,025 $3,175 $9,500Kobelco SK260SR 157 59,300 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,075 $3,250 $9,750Kobelco SK260 LC 176 56,890 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,075 $3,250 $9,750Kobelco SK295 LC 197 66,800 lbs. Allied Ho-Pac 4000VMS 42" x 48" n/a $3,700 $11,000Kobelco SK350 LC 264 79,600 lbs. Allied Ho-Pac 4000VMS 42" x 48" n/a $4,025 $12,000
EXCAVATORS WITH PLATE COMPACTORS
• Customer is responsible for all jumper line damage & repair. • Customer is responsible for isolator replacement.
MAKE MODEL HP WEIGHT ATTACHMENT IMPACT ENERGY CLASS DAY WEEK 4 WEEK
Kobelco SK55SRX 39 12,295 lbs. Rammer 777 550 ft. lb. $495 $1,485 $4,450Kobelco SK85CS 56 17,600 lbs. Rammer 999 1,200 ft. lb. $625 $1,875 $5,675Kobelco SK140SR LC 94 32,100 lbs. Rammer 1655 2,500 ft. lb. $925 $2,750 $8,250Kobelco SK170 LC 121 37,800 lbs. Rammer 1655 2,500 ft. lb. $975 $2,925 $8,750Kobelco SK210 LC 150 47,800 lbs. Rammer 2166 3,500 ft. lb. $1,275 $3,825 $11,450Kobelco SK230SR LC 157 55,500 lbs. Rammer 2166 3,500 ft. lb. $1,385 $4,150 $12,450Kobelco SK235SR LC 153 57,500 lbs. Rammer 2166 3,500 ft. lb. $1,400 $4,225 $12,700Kobelco SK260SR 157 59,300 lbs. Rammer 2166 3,500 ft. lb. $1,450 $4,300 $12,950Kobelco SK260 LC 176 56,890 lbs. Rammer 2577 5,000 ft. lb. $1,600 $4,725 $14,250Kobelco SK295 LC 197 66,800 lbs. Rammer 3288 8,000 ft. lb. n/a $5,850 $17,500Kobelco SK350 LC 264 79,600 lbs. Rammer 3288 8,000 ft. lb. n/a $6,175 $18,500Kobelco SK500 LC 345 111,400 lbs. Rammer 4099 11,000 ft. lb. n/a $8,150 $24,500
EXCAVATORS WITH HAMMERS
• Add $1,000/mo for Underwater kit. • Customer is responsible for greasing hammer at recommended intervals. • Customer is responsible for all hydraulic hose damage and repair. • Customer is responsible for all tool repair and damage.
MAKE MODEL HP WEIGHT ATTACHMENT WEEK 4 WEEK
Kobelco SK210 LC 150 47,800 lbs. LaBounty MSD1500R $7,000 $14,000Kobelco SK350 LC 264 79,600 lbs. LaBounty MSD2500R $10,750 $21,500Kobelco SK500 LC 345 111,400 lbs. LaBounty MSD3000R $12,000 $24,000
Kobelco SK140SR LC w/Allied Plate Compactor
Kobelco SK85SR LC w/Blue Diamond Brush Cutter
Kobelco 80CS w/LaBounty Shear
MAKE MODEL HP WEIGHT ATTACHMENT WEEK 4 WEEK
Kobelco SK85CS 56 17,600 lbs. LaBounty MSD7R $2,300 $6,850
EXCAVATORS WITH SHEARS 3RD MEMBER
MAKE MODEL HP WEIGHT ATTACHMENT DAY WEEK 4 WEEK
Kobelco SK85CS 56 17,600 lbs. McMillen Auger Drive $550 $1,550 $4,650Kobelco SK170SR 121 37,800 lbs. McMillen Auger Drive $750 $2,175 $6,500
EXCAVATORS WITH AUGER SYSTEM
Kobelco SK85SR LC w/McMillen Auger
www.iltruck.com8
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Woods DMH6N 6' wide, 3 pt. Mount $155 $465 $930Rome TAW20S 9' 6" wide, 32" Blades $350 $1,100 $3,300Rome TACW-16 11' wide, 32" Blades $400 $1,200 $3,600Rome TRCW-16 12' 6" wide, 42" Blades $600 $1,800 $5,400John Deere 630 26' wide, 22" Blades $400 $1,200 $3,600
DISC HARROWS
MAKE MODEL HP WEIGHT DAY WEEK 4 WEEK
Mauldin MG622 133 23,000 lbs. $600 $1,800 $5,400 Caterpillar 12M 158 33,000 lbs. $850 $2,500 $7,500 Caterpillar 140H 185 32,500 lbs. $850 $2,500 $7,500 Caterpillar 140M 185 35,700 lbs. $950 $2,850 $8,500 Caterpillar 14H* 229 44,500 lbs. $1,285 $3,850 $11,500
MOTOR GRADERS
Caterpillar 140M
Rome TAW20S
MAKE MODEL HP SPECS DAY WEEK 4 WEEK
N.H. 8N 50 Wheeled Unit $225 $675 $2,025Kubota M135GXD 135 Wheeled Unit
with Loader $500 $1,500 $4,500
Challenger MT755D 327 Rubber Track $850 $2,500 $7,500Case 315 315 Wheeled Unit $850 $2,500 $7,500Case 340 340 Wheeled Unit $850 $2,500 $7,500Case 500 500 Wheeled Unit n/a $3,500 $10,500
AGRICULTURAL TRACTORS
Case 340
MAKE MODEL HP CAPACITY DAY WEEK 4 WEEK
Toro TRX26 26 Walk Behind, 4' Depth $150 $450 $1,350Vermeer RT200 23 Walk Behind, 4' Depth $150 $450 $1,350Vermeer RT450 41.5 Ride-On, 5' 6" Depth $450 $1,350 $4,000Toro RT600 65 Ride-On, 6' Depth $500 $1,500 $4,500Ditch Witch RT55 60 Ride-On, 62" Depth $500 $1,500 $4,500
TRENCHERS
Vermeer Ride-On
MAKE MODEL CAPACITY TYPE DAY WEEK 4 WEEK
Ashland 175XL2 17.5 yd. Dolly Wheel $300 $1,200 $3,500Ashland 215TS 21.5 yd. Ejector $450 $1,350 $4,000Ashland 220TS4 22 yd. Ejector $450 $1,350 $4,000Rome GK-XII 12' wide
12' RollerLeveling Scraper w/Smooth Drum
$400 $1,200 $3,600
SCRAPER PANS & LEVELING SCRAPER
Ashland 220TS4
* With push block and rear ripper.
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Youngs Welding
4048 Roller
2-48" Padfoot Drums, 40" dia., Tow Behind
$200 $600 $1,800
SHEEPSFOOT ROLLER
Youngs Welding 4048
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Unverferth 132 3 pt., 5 Shank Ripper $300 $850 $2,500Great Plains SS1300 3 pt., 5 Shank Ripper $300 $850 $2,500
RIPPERS
Unverferth 132
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Vermeer BPX9000 3 pt., 1,000 RPM PTO $395 $1,175 $3,500
BALE PROCESSOR
Vermeer BPX9000
815-941-1900 [email protected] 9
Volvo DD25WMulti-Quip
Rammax 1575
Caterpillar CS56 Smooth Drum
Volvo SD115DPadfoot Single Drum
Caterpillar 815F Padfoot Four Drum
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Multi-Quip MVC88VTHW Plate Compactor $55 $200 $500Multi-Quip MTX60H Jumping Jack $95 $275 $825Multi-Quip MVH408DZ Reversible Plate
Compactor$225 $795 $2,195
Multi-Quip RX157533 Articulating Trench Roller
$235 $700 $2,100
WALK BEHIND COMPACTORS
MAKE MODEL SPECS DAY WEEK 4 WEEK
Volvo SD45D 54" Single Drum, Canopy $325 $925 $2,775Hamm H5i 54" Single Drum, Canopy $325 $925 $2,775Volvo SD70/75 66" Single Drum,
Canopy/Cab w/AC$400 $1,175 $3,500
Bomag BW177D 66" Single Drum, Cab w/AC $400 $1,175 $3,500Volvo SD115D 84" Drum, Cab w/AC $500 $1,500 $4,500Caterpillar CS56 84" Single Drum, Cab w/AC $500 $1,500 $4,500
SMOOTH DRUM COMPACTORS
* Hydraulic pushblade units available.
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Volvo DD15 36" Double Drum $175 $525 $1,500Volvo DD25W 49" Double Drum $275 $825 $2,475Volvo DD38HF 54" Double Drum $425 $1,250 $3,750Volvo DD112HF 78" Double Drum $695 $2,085 $6,250
ASPHALT ROLLERS
MAKE MODEL CAPACITY 4 WEEK
Screen Machine Scalper 107T Tracked Screen (wireless remote)
$9,000
CRUSHING, SCREENING & SHREDDING PLANTS
Screen Machine Scalper 107T
• Belt damage additional. • Screens not included.
MAKE MODEL SPECS DAY WEEK 4 WEEK
Volvo SD45F* 54" Padfoot Single Drum, Canopy $350 $975 $2,925Volvo SD70* 66" Padfoot Single Drum, Canopy/Cab with A/C $450 $1,350 $4,050Caterpillar CP433E* 66" Padfoot Single Drum, Cab with A/C $450 $1,350 $4,050Volvo SD115* 84" Padfoot Single Drum, Cab with A/C $550 $1,650 $4,850Caterpillar CP56* 84" Padfoot Single Drum, Cab with A/C $550 $1,650 $4,850Caterpillar 815F 39" Padfoot Four Drum, Cab with A/C $1,350 $4,000 $12,000Caterpillar 825G 50" Padfoot Four Drum, Cab with A/C $1,500 $4,500 $13,500
PADFOOT COMPACTORS
www.iltruck.com10
MAKE MODEL CAPACITY WEEK 4 WEEK
Bell B25E 19 yds. $2,700 $8,000Bell B30E 22.9 yds. $3,000 $9,000Bell B40E 30 yds. $4,500 $13,500Bell B45E 33 yds. $4,750 $14,500Bell B50E 37 yds. $5,000 $15,000
OFF ROAD DUMP TRUCKS
MAKE CAPACITY WEEK 4 WEEK
Ford F-750* 2,000 gal. Single Axle $1,085 $3,250Peterbilt 348* 4,000 gal. Tandem Axle
Water Cannons Available$1,650 $200
$4,950 $500
ON ROAD WATER TRUCKS
MAKE MODEL SPECS WEEK 4 WEEK
Ford F450* 11' Contractor Box $750 $2,250Tandem Axle* 16 yds. $1,925 $5,750Tri-Axle* 16 yds. $2,000 $6,000
ON ROAD DUMP TRUCKS
Bell B45E
Peterbilt 348
Western Star 4700
MAKE MODEL CAPACITY WEEK 4 WEEK
Bell B25E 5,000 gal. Tandem Axle $3,500 $10,500Caterpillar 740 8,000 gal. Tandem Axle $4,500 $13,500
OFF ROAD WATER TRUCKS
Caterpillar 740
* All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
MAKE RATES
Tandem Axle Day Cab* $ Call For PricingTri-Axle Day Cab* $ Call For Pricing
SEMI TRUCKS
Kenworth T800
* All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
• Tailgate units available
MAKE MODEL DESCRIPTION WEEK 4 WEEK
Ford F750* Flat Tilt Bed $1,085 $3,250Ford F750* Crew Cab Flatbed $1,425 $4,250Pete 348* Flatbed $1,750 $5,250
FLATBED TRUCKS
Ford 750 Crew Cab
MAKE MODEL WEEK 4 WEEK
Various Flatbed $300 $750Talbert 55 Ton RGN $1,500 $4,500
SEMI TRAILERS
• All Trailers brake & tire wear to be assessed.
MAKE MODEL CAPACITY WEEK 4 WEEK
Redi Haul ML7470S 6,500 lb. Cap. Tilt Deck $200 $600Redi Haul R2027TBIT-HD 12,000 lb. Cap. Tilt Deck $300 $900Redi Haul R2127PFE 13,400 lb. Cap. $300 $900Interstate 40DLA 40,000 lb. Cap. $475 $1,400Interstate 50DLA 50,000 lb. Cap. $550 $1,650
TAG TRAILERS
Interstate 50DLA
• All Trailers brake & tire wear to be assessed.
* All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
815-941-1900 [email protected] 11
MAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST1500VD 500 Gal. $3,675 $11,000
OFF ROAD RUBBER TRACK VACUUMS
MAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST1500VD Seats 10 $2,850 $8,500
OFF ROAD RUBBER TRACK PERSONNEL CARRIERS
MAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST300VD 5,000 lbs. $850 $2,700Morooka MST800VD 9,460 lbs. $1,850 $5,500Morooka MST1500VD 13,890 lbs. $2,350 $7,000Morooka MST2200VD 22,046 lbs. $3,000 $9,000Morooka MST3000VD 33,100 lbs. $4,000 $12,000
OFF ROAD RUBBER TRACK FLATBEDS
MAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST300VD 5,000 lbs. $850 $2,700Morooka MST800VD 9,460 lbs. $1,850 $5,500Morooka MST1500VD 13,890 lbs. $2,350 $7,000Morooka MST2200VD 22,046 lbs. $3,000 $9,000Morooka MST3000VD 33,100 lbs. $4,000 $12,000
OFF ROAD RUBBER TRACK DUMPERS
MAKE MODEL WEEK 4 WEEK
Morooka MST800VD $2,350 $7,000Morooka MST1500VD $2,850 $8,500Morooka MST2200VD $3,500 $10,500
OFF ROAD RUBBER TRACK STRAW BLOWERSMAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST800VD 9,460 lbs. $2,675 $8,025Morooka MST1500VD 13,890 lbs. $3,175 $9,525Morooka MST2200VD 22,046 lbs. $4,025 $11,525
OFF ROAD RUBBER TRACK SANDBLASTERS
MAKE MODEL WEEK 4 WEEK
Morooka MST1500VD $3,500 $10,000
OFF ROAD RUBBER TRACK CONVEYOR
Morooka MST1500VD
w/Vermeer LP573SDT
Morooka MST1500VD
Morooka MST1500VD
w/XP375 Compressor & Marco Blast Pot
Morooka MST1500VD
Morooka MST1500VD
w/HTC Conveyor
Morooka MST1500VD
w/Finn Straw Blower
Morooka MST1500VD
MAKE MODEL CAPACITY WEEK 4 WEEK
Morooka MST2200 VDR 360○ Rotation
24,255 lbs. $4,000 $12,000
OFF ROAD ROTATING RUBBER TRACK DUMPERS
Morooka MST2200VDR
www.iltruck.com12
JLG 1930ES
JLG 450AJ
• On-site assembly/disassembly fees apply.
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
JCB 940 8,000 Ib., Straight Mast RT/21 ft.
$250 $750 $2,250
ROUGH TERRAIN FORKLIFTS
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
JLG 1930ES 19 ft. Platform Height $125 $250 $550JLG 2630ES 26 ft. Platform Height $150 $300 $700JLG 260MRT 26 ft. Platform, DSL, 4wd $250 $550 $1,650JLG 4394RT 43 ft. Platform Height $250 $550 $1,650JLG 340AJ 34 ft. Articulating w/jib, DSL, 4wd $250 $550 $1,650JLG 450AJ 45 ft. Articulating w/jib, DSL, 4wd $250 $550 $1,650JLG 460SJ 46 ft. Telescoping w/6' jib, DSL, 4wd $250 $550 $1,650JLG 600AJ 60 ft. Articulating, DSL, 4wd $325 $775 $2,325JLG 660SJ 66 ft. Telescoping w/6' jib, DSL, 4wd $325 $775 $2,325JLG 660SJC 66 ft. Telescoping, DSL, Crawler $450 $1,200 $3,600JLG 800S 80 ft. Telescoping, DSL, 4wd $550 $1,500 $4,500JLG 800AJ 80 ft. Telescoping, Articulating, DSL, 4wd $550 $1,500 $4,500JLG 860SJ 86 ft. Telescoping w/6' jib, DSL, 4wd $550 $1,500 $4,500JLG 1350SJP 135 ft. Telescoping w/6' jib, DSL, 4wd $750 $2,250 $6,500JLG 1500SJP 150 ft. Telescoping DSL, 4wd $1,750 $5,000 $15,000
JLG PLATFORM LIFTS & MANLIFTS
• Sky Power Generators and Sky Welders available on most units.
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Nissan 50 5,000 Ib. $175 $525 $1,575Hyster S155 14,000 lb. $400 $1,200 $3,600Eaves E-225 22,000 Ib. $700 $2,100 $5,500 Hoist P360* 36,000 Ib. $825 $2,500 $7,500
FORKLIFTS
Nissan 50
JCB 940
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Skytrak 8042 Trussboom 12 ft., Reach $60 $175 $500 Skytrak 10054 Trussboom 15 ft., Reach $70 $200 $550 Skytrak 96" Quick Attach Bucket $75 $225 $675
REACH & TELEHANDLER ATTACHMENTS
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Skytrak 8042 8000 lb., 42 ft. Reach $350 $900 $2,500
Skytrak 10054 10,000 lb., 54 ft. Reach $450 $1,200 $3,600
JLG G12-55A 12,000 lb., 55 ft. Reach $500 $1,500 $4,000
REACH & TELEHANDLER FORKLIFTS
Skytrak 10054
JLG 660SJC
Trussboom
Bucket
815-941-1900 [email protected] 13
Broce KR350
Timber Pro 830B
MAKE MODEL CAPACITY BOOM DAY WEEK 4 WEEK
Tadano GR300XL 30 Ton 101', 42' Jib $850 $2,300 $6,500Grove RT540E 40 Ton 102', 26'-45' Jib $900 $2,500 $7,500Tadano GR500XL 50 Ton 108', 29'-50' Jib $950 $2,850 $8,500Grove RT860 60 Ton 115', 60' Jib n/a $3,300 $9,500Terex RT670 70 Ton 111', 32'-57' Jib n/a $4,000 $12,000Terex RT775 75 Ton 126', 33' Jib n/a $4,175 $12,500
ROUGH TERRAIN CRANES
• Units subject to $195 cable inspection upon return. • Customer responsible for any/all cable damage.
Tadano GR300XL
Mantis 6010
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Laymor 8HC 8' Angle Broom $195 $540 $1,650Broce KR350 8' Angle Broom w/Blade $325 $975 $2,950
SWEEPERS
• Bristle wear charged at $125 per inch. • Blade wear charge additional.
• Units subject to $195 cable inspection upon return. • Customer responsible for any/all cable damage.** On-site assembly charges may apply.
MAKE MODEL DAY WEEK 4 WEEK
Timber Pro 830B Forwarder n/a n/a $19,500
FORESTRY EQUIPMENT
• Tire chains available at $1,000/4 week.
Shuttlelift 5540F
MAKE CAPACITY DAY WEEK 4 WEEK
F-750 17 Ton Boom $475 $1,450 $4,250National 20 Ton Boom $650 $1,950 $5,850National 23 Ton Boom $750 $2,250 $6,700National 28 Ton Boom $775 $2,320 $6,950National 30 Ton Boom $800 $2,400 $7,200
BOOM TRUCKS
National 28 Ton Boom
• On road vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals. • Units subject to $195 cable inspection upon return.
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Broderson IC-35-2E 4 Ton $325 $985 $2,950Shuttlelift 3330FL 8.5 Ton $425 $1,275 $3,825Shuttlelift 5540F 15 Ton $550 $1,650 $4,950
CARRYDECK CRANES
• Diesel & dual fuel available. • Unit subject to cable inspection upon return. • Customer responsible for any/all cable damage.
MAKE MODEL CAPACITY 4 WEEK
Mantis 6010 30 Ton $9,500Mantis 9010 45 Ton $13,500Mantis 10010MX 50 Ton $15,500Mantis 14010** 70 Ton $17,500Mantis WP750 Work Platform $1,000Mantis 18-50 Ton Pole Guide $350McMillen 8K2 Auger System $1,200
CRAWLER CRANES
www.iltruck.com14
Woods 15' Batwing
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Arctic Cat 700S 2 Passenger, Gas $100 $300 $900Kubota X1120 2 Passenger, DSL $150 $400 $1,200Kubota X1140 4 Passenger, DSL $175 $475 $1,400
UTILITY VEHICLES
SIZE DAY WEEK 4 WEEK
3"x20' $6 $18 $544"x20' $8 $24 $726"x20' $16 $48 $1448"x10' $25 $75 $225
SUCTION HOSES
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Wacker* PT3A 3" Trash Pump, Gas $75 $200 $600Magnum* MTP4000D 4" Trash Pump, DSL,
Self Priming$150 $450 $1,350
Magnum* MTP-6000DK
6" Trash Pump, DSL, Self Priming
$200 $600 $1,800
Thompson* 6TSCDJD-ST45T
6" Trash Pump, DSL, Self Priming
$200 $600 $1,800
WATER PUMPS
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
I.R. MX60 60 lb. Breaker w/Point & Chisel
$50 $150 $400
I.R. MX90 90 lb. Breaker w/Point & Chisel
$55 $165 $495
I.R. JH40 40 lb. Rotary Hammer
$30 $105 $275
I.R. 3A2SA Chipping Hammer
$30 $105 $275
I.R. 93LA1 Clay Digger $30 $105 $275Additional Points/Chisels $8 $24 $72
AIR TOOLS
SIZE DAY WEEK 4 WEEK
3"x50' $6 $18 $544"x50' $8 $24 $726"x50' $16 $48 $1448"x50' $25 $75 $225
DISCHARGE HOSES
MAKE CAPACITY DAY WEEK 4 WEEK
Hotsy 4,500 psi Heated Trailer Mounted Pressure Washer w/400 gal. Tank
$175 $525 $1,575
PRESSURE WASHER TRAILER
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Brillion LSS6 6' 3-Point $225 $600 $1,800Broadcast N/A 3-Point $95 $295 $595
SEEDERS
MAKE MODEL DESCRIPTION HP DAY WEEK 4 WEEK
Finn B70T Trailer Mount 34 $300 $750 $2,250
STRAW BLOWERS
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
Woods BB60XC 3 pt. Mower $200 $595 $1,175Woods BW1800 15' Batwing Mower $345 $995 $1,995
MOWING EQUIPMENT
• Customer responsible for blade damage.
* Single shift rates. • Double shift (8-16 hours/day) 1.5 x rate. • Triple shift (16-24 hours/day) 2 x rate. • P.M. service additional.
Magnum MTP6000DK 6"
VermeerVactron LP833DT
MAKE MODEL SPECS DAY WEEK 4 WEEK
Vermeer Vactron LP573SDT
500 gal. Debris Tank, 1,000 CFM Vacuum, 4,000 psi @ 4gm
$400 $1,200 $3,600
Vermeer Vactron LP833DT
800 gal. Debris Tank, 1,000 CFM Vacuum, 4,000 psi @ 4gm
$450 $1,300 $3,900
VACUUMS
Finn B70TIngersoll Rand MX90
Arctic Cat 700S
Brillion LSS-6
815-941-1900 [email protected] 15
MagnumMMG125
LincolnVantage 400
Ingersoll Rand XP375
MMD Heat Pro 700
Ingersoll RandP185 w/Blast Pot
RENTAL GUIDELINES• A rental agreement must be signed, and account must be established prior to pick up or delivery.• Rates are based on an 8 hour day, 40 hour week, & 176 hour month. Rates are based on time out not time used. Additional hours will be billed accordingly. • Rental charges will continue on equipment until Illinois Truck & Equipment has been notified that the equipment is ready to be picked up and off rent number is obtained.• All equipment is delivered with a full tank of fuel. If equipment is returned with out a full tank, Lessee will be billed at $5.50 per gallon.• Lessee is responsible for daily maintenance, unusual wear and tear and any tire repairs.• Physical Damage & Liability Insurance is required from the Lessee for the equipment against damage, theft or vandalism. A certificate of insurance is needed in order to rent equipment.• Lessee will return equipment in a reasonably clean condition. • Lessee will be billed for excessive clean up at posted shop rates.• Lessee is responsible for all transportation charges. • Trucking Rates: 0-50,000 lbs. - @ $120/hr. 50,001 - 80,000 lbs. @ $130/hr. 80,001 - 100,000 lbs. @ $140/hr. 100,001 - 120,000 lbs. @ $155/hr. NOTE: State and local permits are additional when required.• Prices are subject to change without notice. • All rentals are subject to availability. NOTE: $250 call out fee will be applied to any rental required outside normal business hours.
MAKE MODEL CAPACITY DAY WEEK 4 WEEK
I.R. P185* 185 cfm @ 125 psi $125 $300 $750I.R. P185 w/Blast Pot* 185 cfm @ 125 psi $200 $525 $1,575I.R. XP375* 375 cfm @ 125 psi $150 $450 $1,350I.R. XP825* 825 cfm @ 125 psi $385 $1,150 $3,450I.R. HP1600* 1600 cfm @ 150 psi $585 $1,750 $5,250
AIR COMPRESSORS
MAKE MODEL DESCRIPTION DAY WEEK 4 WEEK
Lincoln Vantage 400 400 amp Towable $100 $250 $750Lincoln Classic 300D 300 amp Towable $100 $250 $750
WELDERS
• Remotes and leads available at additional cost.
MAKE MODEL SPECS DAY WEEK 4 WEEK
Wacker GS9.5V 9,700kW, Single Phase, Gas $100 $265 $775Magnum MMG100D 86kW, 3 Phase, Diesel $225 $650 $1,950Magnum MMG120 102kW, 3 Phase, Diesel $250 $750 $2,250Magnum MMG150D 127kW, 3 Phase, Diesel $300 $900 $2,700Magnum MMG185 177kW, 3 Phase, Diesel $365 $1,085 $3,250Magnum MMG235D 204kW, 3 Phase, Diesel $425 $1,250 $3,750Magnum MMG320 278kW, 3 Phase, Diesel $575 $1,650 $4,950
GENERATORS
MAKE MODEL CAPACITY DESCRIPTION DAY WEEK 4 WEEK
Magnum* MLT6S 6,000 kW Vert. Mast $125 $300 $675Power-Zone Auto Start Units Available
LIGHT PLANTS
* Single shift rates. • Double shift (8-16 hours/day) 1.5 x rate. • Triple shift (16-24 hours/day) 2 x rate. • P.M. service additional.
* Single shift rates. • Double shift (8-16 hours/day) 1.5 x rate. • Triple shift (16-24 hours/day) 2 x rate. • P.M. service additional.
* Single shift rates. • Double shift (8-16 hours/day) 1.5 x rate. • Triple shift (6-24 hours/day) 2 x rate. • P.M. service additional.
Magnum MLT6S
MAKE MODEL SPECS DAY WEEK 4 WEEK
MMD Heat Pro 700 700,000 BTU $625 $1,850 $5,500Totem 10CD 1,000,000 BTU $725 $2,175 $6,50025' Ducts $25 $75 $225
HEATERS
• Knowledgeable - Rental & Sales Representatives • Dependable - Service & Parts Departments• Professionally Trained - Dispatch & Transportation
We Are Proud to Provide: One CallRents It All!
Interstate 80 to Exit 112 Route 47 South 1/4 mile to Route 6 East 1/2 mile to320 Briscoe Drive
Directions:
• Chicago O’Hare - 60 min.• Chicago Midway - 50 min.• Morris Municipal - 5 min.
Airports:
Location & Directions
Email: [email protected] Phone: 815-941-1900
815-941-1900
320 Briscoe Drive Morris, Illinois 60450
www.iltruck.comwww.iltruck.com