renolit reface by metamark brochure - new
TRANSCRIPT
Building Wrap Film instead of Paint
Smart Solutions for the Design and Renovation of Facades
3
Is a quick and easy application, simple cleaning and long life of im-portance to you? Then RENOLIT REFACE must be your first choice. The high-quality, multi-layer film is applied directly to cleaned facade panels. But if required, the facade elements can also be removed and the film applied while the panels are on the ground.
Irrespective of which method you choose, with RENOLIT REFACE you can halve the costs of renovation because old panels need not be disposed of and no new panels are required. And as the basic structure of the building remains unaltered, the building doesn’t require conformance with the latest building regulations. And you will also like this: The building can continue to be used as normal and the business can operate as usual during the renovation. You don’t have to worry about drying times, odours or the masking of neighbouring surfaces.
You will be satisfied with RENOLIT REFACE for a long time because the film is weathering-resistant for at least ten years. This increases the durability of facades and permanently reduces upkeep costs. This not just of benefit to the owner of the property but also to the environment.
Simple RenovationWith RENOLIT REFACE.
Customise a building by renovating its facade. This simple concept is behind the RENOLIT REFACE range of high-performance films. And property owners benefit in three ways. They save expensive repainting or remodeling, they can look forward to greater long-term value and their property improves in appearance.
RENOLIT REFACE gives buildings an attractive appearance and facades look like new again. You can refresh the shell of a building quickly, cost-effectively, cleanly and durably with the innovative, self-adhesive, multi-layer film from RENOLIT. The weathering-resistant film covers metal facades or facade elements like a second skin and lets them radiate.
And furthermore: RENOLIT REFACE also scores in terms of sustainability. Property owners can not only dispense with repeated expensive repainting but also no new metal facade panels need to be ordered or disposed of.
RENOLIT REFACE
Gives Facades a Fresh, New Appearance – Versatile, Durable and Sustainable.
2
Easy to CleanThe film’s dirt-repellant PVDF sur-face simplifies cleaning because it hinders the adherence of dirt (Easy to Clean properties). Even graffiti can be easily removed.
EconomicalRenovations with RENOLIT REFACE are about 50 % cheaper than ex- changing facade panels. In addition, the film’s durability and simple clea-ning further reduce overall costs.
UV- and weathering- resistantThe film’s transparent acrylic protec-tion layer and high-quality pigments give RENOLIT REFACE weathering resistance of at least ten years.
SustainableSimple cleaning and excellent weathering resistance result in consistently low maintenance costs. Naturally, RENOLIT REFACE is free of solvents. And again: Because the facade panels can be reused, significantly fewer materials (metals) are used.
The AdvantagesAt a Glance.
Easy to ApplyThanks to our “Air Release Tech-nology”, RENOLIT REFACE can be applied bubble-free in one step. As a result of its low weight, the film is easy to apply in situ.
VersatileA broad range of colours means that the appearance of a building can be completely changed. In ad-dition, the plotter compatibility of RENOLIT REFACE generates endless design opportunities.
FunctionalWith a film width of up to 1.5 metres, RENOLIT REFACE is perfectly dimensioned for almost all facade formats. The high performance film is highly fire-resistant and the satin-embossed, structured upper surface can also smoothen-out slightly uneven surfaces. And as opposed to paint finishes, films have a consistent thickness.
4 5
6 7
RENOLIT REFACE No Removal of Facade Panels.
Clean the substrate (facade panel) and cut RENOLIT REFACE to the necessary dimensions.
Peel-off the backing paper and apply directly to the facade surface. The facade panels need not be removed from the wall.
Thanks to the film’s “Air Release Technology”, the film can be applied bubble-free by simply smoothing down with a felt- covered wiper.
THE RESULT: A durable and high-quality surface finish.
RENOLIT REFACE is light with a uniform thickness. It protects the substrate while its structured upper surface can smooth out slight unevenness. And the special stiffness of the film enables unproblematic on-site application even in windy weather. At the same time, RENOLIT REFACE is flexible enough
to be applied around edges and corners. The product’s “Air Release Technology” stops air bubbles forming. And small positioning errors are easily corrected because the film can be repositioned before the adhesive begins to cure.
AFTER
BEFORE
Easy to Use.
1
2
3
8 9
WORKSHOP HOCKENHEIM
CAR DEALERSHIP CHRISTMANN
OFFICE BUILDING WOLFSBURG
HOSPITAL WORMS
OFFICE BUILDING EINDHOVEN
10 11
From 300m2 individual colour needs can be realized.
9010Pure White
9006White Aluminum
9002Grey White
7035Light Grey
7016Anthracite Grey
5007 Blue
3011Red
9001Cream White
Aluminium Silver (metallic)
1024 Curry Yellow Signal White
7042Traffic Grey
Twelve immediately available satin-matt base colours can be complemented by an endless number of customer-specified colours. RENOLIT REFACE can also be trimmed or cut in any shape or form. Even company logos or other signage can easily be applied to facades.
COLOURS
Almost Unlimited Possibilities.
TEST METHOD UNIT RESULT
Thickness DIN EN ISO 4593 mm 0,160
Surface Weight DIN EN ISO 2286-2 g/m² 180
Surface Gloss DIN EN ISO 2813 60° Gloss Units 10 satin
Breaking Tension ISO 527-3/2/200 MPa 25
Elongation Stability ISO 527-3/2/200 % 100
Dimensional Stability FINAT FTM 14 mm 0,2
Fire Resistance DIN EN 13823classified according to EN 13501-1
in class: C d0 s1 “flame retardant“
Adhesion(Initial adhesion after 24 h)
FINAT FTM 01on steel
N / 25 mm N/m
15 600
Weather Stabiltiy ISO 4892-2Greyscale ISO 105-A2
level 3 after 8000 hours
RENOLIT REFACE is not developed for application on PVC window profiles and therefore also not certified by the RAL Gütegemeinschaft according to RAL GZ 716.
RENOLIT REFACE
standard multilayer film
standard singlelayer film
Colour Change in ∆E
01 2 3 4 5 6 7 8 9 10
123456789
years
PRODUCT INFORMATION
TECHNICAL DATA
WEATHERING STABILITY – EG., COLOUR SILVER
Embossing: 083 structuredStandard Delivery Wide: 1300 mmStandard Roll Length: 50 m
12