renna led type: project

SPECIFICATIONS Type:

Project:

1© 2014-2021 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.

PeerlessLighting.com1-800-705-SERV (7378) | [email protected]

Rev. 06/24/21

Renna LEDRNNAID | LED | Indirect/Direct | Suspended

empowered

RNNAS (Surface Mount)RNNAVWW (Vertical Wall Wash)

RNNAD (Direct Only)

DIMENSIONS

STANDARD DISTRIBUTION

60% Up | 40% Down

DETAILS

COMPANION LUMINAIRE(S)

CUSTOMIZATION

Ask us about the following possibilities: Transitions, additional distributions, additional mounting options, custom colors, and other modifications.

n RNNAID

HIGHLIGHTS

• Total System Integration features 5-year limited warranty by Acuity Brands covering all components and construction

• 4' and 8' sections. Eight base direct and indirect distributions available

• Up to 134 lm/W

• High performance batwing distribution using injection molded optic.

• Optional dual circuit switching for independent dimming of indirect and direct light outputs.

• Softshine® engineered comfort optics

• Flicker free dimming to dark (0.1%) powered by Modulus power and control architecture with integrated digital nLight® module for system networking

• Standard square end plates, rounded or sculpted end plates optional

• White, black, painted aluminum or custom color

LUMEN PACKAGES Based on 3500K. Additional color temperatures available.

Indirect LED Output / Direct LED Output

I300LMF / 300LMF

I600 LMF / 500LMF

I900LMF / 700LMF

I1200LMF / 900LMF

Indirect Delivered Lumens Per Foot / Direct Delivered Lumens Per Foot

300 / 300 600 / 500 900 / 700 1200 / 900

Total Delivered Lumens Per Foot 600 1100 1600 2100

Input Watts Per Foot 5.6 9.5 13.9 17.7

Direct Lumens Per Watt 93 98 99 102

Indirect Lumens Per Watt 125 132 134 131

1 5⁄16"

4 3⁄16"

C

C

1516"

4316"

RNNAID

REVISIONS

ZONE REV. DESCRIPTION ECO DATE DRAWNBY CHKR

DRAWING NO.

REQUIRED

REQUIRED

REQUIREDSHEET 2 OF 3

1/9/1900REQUIRED

UNLESS OTHERWISE SPECIFIED:

WEIGHT

REV

PART NO.

DESCRIPTION

NAME DATE

CHK BY:

DWN BY:

ENG BY:

DRAWING PREPARED IN ACCORDANCE WITH ANSI Y14.5M-1982

DIMENSIONS ARE IN INCHES TOLERANCES:

ANGULAR: 2XX: .03

XXX: .015

PROPRIETARY AND CONFIDENTIAL

THIS PRINT IS THE CONFIDENTIAL PROPERTY OF

ACUITY BRANDS AND IS LOANED SUBJECT TO RETURN UPON DEMAND AND UPON EXPRESS CONDITION THAT IT WILL NOT BE DISCLOSED TO

ANY THIRD PARTY WITHOUT THE PRIOR WRITTEN PERMISSION OF

ACUITY BRANDS OR USED DIRECTLY OR INDIRECTLY IN

ANY WAY DETRIMENTAL TO THE INTEREST OF ACUITY BRANDS

THIRD ANGLE PROJECTION

DO NOT SCALE DRAWING

REQUIREDFINISH

MATERIAL

BSIZE

SCALE: 1:8

A A

B B

4

4

3

3

2

2

1

1

SQEP (Square End Plate) REP (Round End Plate) SCEP (Sculpted End Plate)

SM

http://PeerlessLighting.com

mailto:[email protected]

https://declare.living-future.org/search?query=acuity

© 2014-2021 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.


Rev. 06/24/21

Type:

Project:

2


MODEL NUMBER Example: RNNAID LLP 32FT MSL8 90CRI 35K I600LMF 500LMF SSH DARK 277 DCT F1/48A C210 REP

t t t t t t t t

Luminaire Linear Length Plan Total Run Length Maximum Section Length LED Color Rendering LED Color Temperature Indirect LED Ouput Direct LED Output

RNNAID LLP Linear longest possible

LSL Longest same length

LCB Longest Center Balanced

__FT Indicate Luminaire Row Length in 2’ increments. Ex: 26FT*2’ only available in a run not as an individual fixture. Ex 6FT MSL4

MSL4 4' Section(s)MSL8 8' Section(s)

90CRI 90+ CRI 27K 2700K30K 3000K35K 3500K40K 4000K50K 5000K

I300LMF 300 Nominal lumens per foot




*Available in 100 lumen increments between min & max LMF

300LMF 300 Nominal lumens per foot




*Available in 100 lumen increments between min & max LMF

t t t t t

Direct Lens (Light Guide Plate) Minimum Dimming Level Control Input Voltage Wiring Option Emergency OptionsSSH SoftShine DARK Constant current,

dimming to < 1%MIN1 Constant Current

dimming to 1%

ZT* 0-10VNLIGHT** nLight enabledDALI*** DALI enabledNLTAIR2 nLight AIR enabledECOI Lutron Ecosystem

Interface*0-10V will use linear dimming curve** Will use logarithmic dimming curve***Not available with sensors***Will use logarithmic dimming curve

120 120V277 277V347* 347VMVOLT 120V-277V*347V not available with ECOI, EC, E35INV or WEC

SCT Single circuitDCT* Dual circuit*Not available with NLTAIR2

(Blank) None_EC Emergency circuit moduleE35INV * 35W Emergency Micro InverterWEC Whole run on EC circuit*Not available with 27K, 50K, 347V, MVOLT or CPOnly available on runs of 8ft or greater

t

Primary Sensor or Zone Secondary Zone Tertiary Zone(blank) Select if single zoneNS_* Select if multi-zones required (with no

sensors), call out length of zone in feet. Zone length must match whole fixture lengths, zones cannot end mid-fixture.

_VTX15FADC** Vertex Sensor

*Not available with NLTAIR2** Only available with NLIGHT. Max 5 Vertex sensor per run. Not available with secondary or tertiary zones

(blank) Select if single zoneSNS_ Select if secondary zone is required (with no

sensors), call out length of zone in feet. Zone length must match whole fixture lengths, zones cannot end mid-fixture.*Not available with NLTAIR2

(blank) Select if single zoneTNS_ Select if tertiary zone is required (with no

sensors), call out length of zone in feet. Zone length must match whole fixture lengths, zones cannot end mid-fixture.*Not available with NLTAIR2

t t

Mounting Type/ Overall Suspension Color End Caps OptionsF1/* T-bar ceiling (universal

mounting bracket)F1A/* T-bar ceiling (universal

mounting bracket) with integrated J-box)

F2/** Hard ceiling (horizontal J-box)

*F1 & F1A Mount uses standard 3 1/2” canopy on feed and 2” canopy on support

**F2 Mount uses standard 5” canopy on feed and 2” canopy on support

***All feed cords, cord managers and canopies are standard white. They are not painted to match fixture color.

24A 24" adjustable48A 48" adjustable96A 96" adjustable144A 144" adjustableMeasured from ceiling to bottom of luminaire.

C210 Textured WhiteC202 Textured BlackC110 Painted AluminumC099 Custom colorRALTBD* RAL Paint Finishes*RALTBD for pricing only, replace with applicable RAL call out when ready to order. See the RAL BROCHURE for available options

SQEP Square End CapsREP Rounded End CapsSCEP Sculpted End Caps

BLK Black cord, cord manager and canopy

CP Chicago PlenumMCS Matching Canopy at

support for aestheticsOJB Offset J-box at feedSLP* Sloped Ceiling*When SLP is chosen need to choose F2 mount and OJB

A+ Capable options indicated by this color background.



https://peerlesslighting.acuitybrands.com/-/media/Files/Peerless/Resources/Architectural%20RAL%20Color%20Brochure%20pdf.pdf?la=en



Rev. 06/24/21

Type:

Project:

3


SPECIFICATIONS

HousingExtruded outer and inner aluminum housing for light weight rigidity and support.

End PlatesDie-cast aluminum end plates are mechanically attached with no exposed fasteners. Square end plates standard. Sculpted or Rounded end plates are optional.

ColorStandard colors are textured white, textured black, and painted aluminum. Consult factory for customer colors and RAL color options.

Luminaire Length2’, 4’, and 8’ lengths in a single section for nominal suspension spacing of 4’ and 8’. For total length, add 2 1/2” for each standard end cap, and 4” for each optional end caps.

Source8 standard lumen packages available with 2700K, 3000K, 3500K, 4000K, 5000K CCT all within a 2.5 step MacAdam Ellipse.

OpticsDirect optical system consists of Softshine high performance acrylic lens and microstructure film. Injection-molded indirect optic for optimized batwing distribution.

Modulus Remote Power and Control SystemRemote power source provides “natural dimming” with smooth, continuous and flicker-free dimming to dark (0.1%). Syncing for controls: 2mA max.

THD: <10%. Insignificant inrush current at 120 and 277VAC. FCC Class A and B tested for EMI and RFI. When NLIGHT or DALI is specified driver will be set for logarithmic dimming curve. If control Input of 0-10V is specified driver will be set for linear dimming curve.

Integrated digital nLight® module enables up to 16 Modulus zones via CAT-5e, when nLight® is selected. The Modulus™ head unit outputs a maximum of 10mA into the nLight® bus. For daylight dimming and/or dual technology detection, see Controls page for external sensor options.

Each modulus head unit utilizes 22 device addresses. Tunable White head units consume 14 device addresses.

ElectricalLED light engine — consisting of modular LED boards and eldoLED® dimming driver — is rated for 60,000 hours (L80) at 25° C ambient temperature. Pre-wired with 18AWG fixture wire. Plug in electrical connectors included in fixtures sections, hard wire connections to be made at canopies and head units.

EnvironmentSuitable for damp location.

ValidationcULus listed.Tested to UL2108 Standards. LM-79 tested. Individual sections meet FCC Part 15 requirements.PackagingRecycled cardboard box and inserts. Biodegradable, protective luminaire bag. Recycled kraft paper tape.

Warranty5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.All values are design or typical values, measured under laboratory conditions at 25°C.

A+ Capable LuminaireThis item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*

• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details

The product images shown are for illustration purposes only and may not be an exact representation of the product.



http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

http://www.acuitybrands.com/aplus



Rev. 06/24/21

Type:

Project:

4


FIXTURE PERFORMANCE DATA

EXPECTED LIFE: L80@60,000 HOURS

CCT SCALING CHART

35K I1200LMF/900LMF

Indirect: 131 lm/w

Direct: 102 lm/w

2100 delivered lumens

CCT CRI MULTIPLIER

27K 90CRI .84

30K 90CRI 1.01

35K 90CRI 1

40K 90CRI 1.01

50K 90CRI .84

HEAD UNIT RUN LENGTH CHART

Dir

ect

Lum

en O

utpu

t

Indirect Lumen Output

Lumens/ft 0 I300 I600 I900 I1200

0 32ft 32ft 32ft 32ft 28ft

300 32ft 32ft 32ft 28ft 24ft

500 32ft 32ft 32ft 24ft 20ft

700 32ft 32ft 24ft 20ft 16ft

900 32ft 24ft 20ft 16ft 16ft

*This table indicates 1 Head Unit required for the identified run length *Lumen values based on 3500K color temperature





Rev. 06/24/21

Type:

Project:

5


✓

✓

✓

✓ ✓

✓

✓

✓

MOST COMMON MOUNTING TYPES AND OPTIONS Options available for this specific luminaire are checked in the boxes below.

Mounting TypeF1/ For use with most T-Bar and screw slot grid ceilings. Designed for on-grid and

off-grid applications.F2/ For use with recessed or surface mount horizontal J-box applications.F1A/ For use with most T-Bar and screw slot grid ceilings. Designed for on-grid and off-grid

applications. Comes complete with vertical J-box with built-in wire way. See also CP.

Mounting OptionsMCS Matching canopy at support for aesthetics.OJB Offset J-box at feed.SLP OJB Sloped ceiling couplers and offset J-box option at feed.

Power Feed

Support

n F1/MCS

Power Feed

Support

n F2/SLP OJB

Power Feed

Support

n F2/

Power Feed

Support

n F2/MCS

Power Feed

Support

n F1A/

Power Feed

Support

n F1A/MCS

Power Feed

Support

n F2/OJB

Power Feed

Support

n F1/

n ✓ Indicates mounting options available with this luminaire.

To see more, see the Hanging Hardware Selection Guide.



https://peerlesslighting.acuitybrands.com/-/media/abl/peerlesslighting/files/resources/mounting-instructions/hanging-hardware.pdf



Rev. 06/24/21

Type:

Project:

6


LINEAR PLAN:

PEERLESS offers the ability to provide a continuous run plan to suit your requirements by optionally offering three different methods of configuration.

LSL- Linear Same Length:In this configuration, each segment is the same length and is standardized based on the longest length available and is the only option provided. Because it is dependent on one segment length there are mathematical limitations on what overall row lengths can be achieved. Example: 20 FT row would be achieved with 5, 4 FT long segments equaling 20 FT (nominal).

LLP- Linear Longest PossibleIn this configuration, the longest length available is optimized, resulting in the fewest segments and mounting locations. Caution, should be used where balanced appearance is a concern. Example: 20 FT run would have 2 - 8 FT segment and 1, 4 FT segment at the end of the run.

LCB- Linear Center Balanced:This configuration incorporates the longest center segment(s) along with any additional lengths required to fill the run length, added to the run ends. Example: 16 FT run would have 2, 4 FT segments (one at each end) and 1, 8 FT segment in the center.

8 FT 8 FT 4 FTLLP

4FT 4FT 4FT 4FT 4FTLSL

4 FT 8 FT 4FTLCB

WEIGHTS & SUPPORT SPACING

ORDERED LENGTH

INDIVIDUAL FIXTURES

2FT

4FT

8FT

"A" O.C.

2'-0"

4'-0"

8'-0"

"B" SQEP OVERALL

2'-4"

4'-4"

8'-4"

"B" SCEP OVERALL

2'-6"

4'-6"

8'-6"

"B" REP OVERALL

2'-6"

4'-6"

8'-6"

APPROX. WEIGHT

4LB

8LB

16LB

ORDERED LENGTH

RUN LAYOUT

2FT

4FT

8FT

"A-1" O.C.

2'-0"

4'-0"

8'-0"

"B-1" SQEP OVERALL "B-1" SCEP OVERALL "B-1" REP OVERALL "B-2" OVERALL"A-2" O.C.

2'-0"

4'-0"

8'-0"

APPROX. WEIGHT

4LB

8LB

16LB

2'-2"

4'-2"

8'-2"

2'-3"

4'-3"

8'-3"

2'-3"

4'-3"

8'-3"

2'-0"

4'-0"

8'-0"

"B"

"A"

"B-1"

"A-1" "A-2" "A-1"

"B-2" "B-1"

Suspension spacing equals section length. Default location shown.





Rev. 06/24/21

Type:

Project:

7


Sensorview Software(only required for rezoning)CAT-5eClass 1 DC Power

Class 1 AC Input

Renna Head Unitwith NLIGHT or

NLT control

Renna Luminaire withIntegral VERTEX Sensor

Drawing #:

Date:

Scale:

Sheet:

PREP

ARED

FO

R:

DR

AWIN

G T

YPE:

Drawn By:

DWG Ref:

DE

SIG

N &

AP

PLI

CA

TIO

NS

PRO

JEC

T N

AME:

NAM

E

RFA

# X

XXXX

-X

SUBM

ITTA

L FO

R A

PPR

OVA

L

AXXX

DATE

ANSI B

XXX

MLX.3

INTELLIGENT LUMINAIRE CHARTS

CONTROLS

Choose nomenclature from these columns

Dri

ver

Conf

igur

atio

ns

Minimum Dimming Level Control Input Driver Dimming

Range Notes

MIN1 + DALI = eldoLED DCDC DUALdrive 100 to 1% Logarithmic Dimming, DALI controls and power supply supplied by others

MIN1 + ZT = eldoLED DCDC DUALdrive 100 to 1% Linear Dimming, supplied with leads for two independent zones of 0-10V

MIN1 + NLIGHT = eldoLED DCDC DUALdrive 100 to 1% Logarithmic Dimming, nIO EZDCA 16Z in head unit

MIN1 + NLTAIR2 = eldoLED DCDC DUALdrive 100 to 1% Logarithmic Dimming, rIO EZDL in head unit with external antenna

MIN1 + TUWH NLT = eldoLED DCDC DUALdrive 100 to 1% Logarithmic Dimming, nIO EZDCA CCT in head unit

MIN1 + ECOI = eldoLED DCDC DUALdrive 100 to 1% Logarithmic Dimming, Lutron TVI-LMF-2A Ecosystem -> 0-10V converter in head unit

DARK DALI eldoLED DCDC DUALdrive 100 to 0.1% Logarithmic Dimming, DALI controls and power supply supplied by others

DARK ZT eldoLED DCDC DUALdrive 100 to 0.1% Linear Dimming, supplied with leads for two independent zones of 0-10V

DARK NLIGHT eldoLED DCDC DUALdrive 100 to 0.1% Logarithmic Dimming, nIO EZDCA 16Z in head unit

DARK NLTAIR2 eldoLED DCDC DUALdrive 100 to 0.1% Logarithmic Dimming, rIO EZDL in head unit with external antenna

DARK TUWH NLT eldoLED DCDC DUALdrive 100 to 0.1% Logarithmic Dimming, nIO EZDCA CCT in head unit

Remote sensors can be paired with NLIGHT options to control your runs.

External nLight DeviceCAT-5eClass 1 DC Power

Class 1 AC Input

Renna Head Unit

Renna Luminaire

Cont

rol +

Sen

sor

Conf

igur

atio

ns

Control Sensor Sensor Notes

NLIGHT + VTX15FADC = VERTEX 15F EZ ADC VLP Available in endcaps or midpoint of 8ft fixture section. Max 5 sensors per run. Zoning reconfigurable via Sensorview software.

NLT + VTX15FADC = VERTEX 15F EZ ADC VLP Available in endcaps or midpoint of 8ft fixture section. Max 5 sensors per run. Zoning reconfigurable via Sensorview software.

FOR EXTERNAL CONTROLS

FOR INTERNAL CONTROLS





Rev. 06/24/21

Type:

Project:

8


REMOTE HEAD UNITS

F1 CEILING DETAILS

GRID MOUNTING BRACKETSUPPLIED FOR EACH SUPPORT

LOCATION

4"X4" J-BOX BY OTHERS(F1A J-BOX PROVIDEDBY PEERLESS)

INPUT CLASS 1BY OTHERS

50'-0" MAX REMOTE HEAD UNIT DISTANCE

TO STRUCTUREBY OTHERS

REMOTE HEAD UNIT

12 GA WIRE ,TO SUPPLYCLASS 1 DC POWER TOLUMINAIRE BY OTHERS POWER FROM

HEAD UNITTO STRUCTUREBY OTHERS

J-BOX AND MOUNTING MEANSBY OTHERS

50'-0" MAX REMOTE HEAD UNIT DISTANCE

BLOCK/MOUNTING MEANSBY OTHERS

MOUNTING HARDWAREBY OTHERS

12 GA WIRE ,TO SUPPLYCLASS 1 DC POWER TOLUMINAIRE BY OTHERSINPUT CLASS 1

BY OTHERS

POWER FROMHEAD UNIT

F2 CEILING DETAILS

RNNAID...48FTm f

[blank]

m f

[blank]

m f

[blank]

m f

[blank]

m f

FK/L

DK320P

m f

FK/L

1st head unit 2nd head unitf

ACG8FK

RNNAEP RNNAEP

f

ACG8FKACG8SK ACG8SK ACG8SK ACG8SK ACG8SK

DK320P





Rev. 06/24/21

Type:

Project:

9


REMOTE HEAD UNITS

ADJ1'-6 TO 2'-0"

1'-10 716"

MOUNTING LOCATIONS OVERALL DIMENSIONS2'-2 1/4" X 2'-3/4" X 4 3/4"

1'-6"

912"

MOUNTING LOCATIONS OVERALL DIMENSIONS1'-8 1/4" X 1'- 3/8" X 2 5/8"

MOUNTING LOCATIONS

F1 HEAD UNIT DETAILS F2 HEAD UNIT DETAILS

1'-6"

912"

MOUNTING LOCATIONS OVERALL DIMENSIONS1'-8 1/4" X 1'- 3/8" X 2 5/8"

MOUNTING LOCATIONS

ADJ1'-6 TO 2'-0"

1'-10 716"

MOUNTING LOCATIONS OVERALL DIMENSIONS2'-2 1/4" X 2'-3/4" X 4 3/4"OVERALL DIMENSIONS2'-2 ¼" x 2'-¾" x 4 ¾"

OVERALL DIMENSIONS1'-8 ¼" x 1'-3⁄8" x 2 5⁄8"





Rev. 06/24/21

Type:

Project:

10


EMERGENCY OPTIONS

100%0%0%0%0%0%

0%0%0%0%0% 0%

100% 0%0%

0%0%0%0%0%

100%

0%0%

100%0% 100%

FK/L EC/R

FK/L EC/L EC/L

EC / GTD UNIT

EC / GTD UNIT

E35INV UNIT

10% 10% 10% 10% 10% 10%

0%0%0%0%0% 0%FK/L E35INV E35INV E35INV

RNNAID LLP...1EC

RNNAID LLP...4EC

RNNAID LLP...E35INV

TYPICAL BUILDING LAYOUT

J BOX

J BOX

NORMAL POWER

EC POWER

RNNA

RNNA 1EC

RNNA

RNNA HEAD UNIT

RNNA EC UNIT

RNNA HEAD UNIT

RNNAID LLP...IEC

RNNAID LLP...4EC

RNNAID LLP...E35INV

RNNAID

Emergency Options:EC circuits default to the right side 4’ section, of an 8’ fixture (EC/R) and the complete section of a 4’ fixture (EC/L). Single EC circuit defaults to the last 4’ of the run. Dual EC circuits default to the last 4’ of the run and the first 4’ of the run. Additional circuits will be added from the end of the run using the last 4’ of an 8’ fixture or complete 4’ fixtures. If the final fixture is a 2’ fixture, the EC circuit will be placed at the next available 4’ or 8’ fixture section from the end of the run.

EXAMPLES OF TYPICAL EMERGENCY LAYOUTS.

*During Emergency modes the indirect portion of the luminaire will be disabled.

*Emergency power for the Head Unit is not supposed to be daisy chained from another head unit.





Rev. 06/24/21

Type:

Project:

11


EMERGENCY OPTIONS

INTEGRATED SENSOR LAYOUT

24FT MSL8 run with �ve sensors - 5VTX15FADC

8FT MSL8 run with one sensor - VTX15FADCCORRECT:

8FT MSL8 run with three sensors - 3VTX15FADC

16FT MSL4 run with two sensors - 2VTX15FADC

16FT MSL8 run with �ve sensors - 5VTX15FADC

INCORRECT:

NOTES:

12FT MSL4 run with three sensors - 3VTX15FADC

- 5 sensors max per run- Only U8 �xtures can support internal sensors- Sensors are available in end plates- Sensors in end plates require adjacent VTX/WL or VTX/WR �xture sections- Sensors appear as nLight devices and can be re-zoned in the �eld using Sensorview software- Factory zoning isn’t available with sensors since they can be re-zoned in the �eld using Sensorview- Internal sensors are only available with NLIGHT and NLT control types

Doesn’t work because U4 and U2 sections can’t have internal sensors so MSL4 runs can have at most two sensors, one in each end plate

Doesn’t work because there are only four available spots for sensors - midspan of each U8 section and one in each end plate

Doesn’t work because each sensor requires a separate driver for power and communication, and U8 sections most often only have two drivers

16FT MSL8 run with two sensors and two zones - 2VTX15FADC NS8 SNS8Primary zone - 8FT Secondary zone - 8FT

Doesn’t work because sensors cannot be ordered with factory zoning. Drivers and sensors can be re-zoned using Sensorview software.

32FT MSL8 run with six sensors - 6VTX15FADC

Doesn’t work because each head unit can support at most �ve sensors

0%0%0%0%0% 0%

0%0%0%0%0%

100%

0%0%

EMERGENCY OPTIONS:EC circuits default to the right side 4' section, of an 8' fixture (EC/R) and the complete section of a 4' fixture (EC/L).Single EC circuit defaults to the last 4' of the run.Dual EC circuits default to the last 4' of the run and the first 4' of the run.Additional circuits will be added from the end of the run using the last 4' of an 8' fixture or complete 4' fixtures.If the final fixture is a 2' fixture, the EC circuit will be placed at the next available 4' or 8' fixture section from the end of the run.

FK/L

FK/L EC/L/R EC/L

RNNAID

EC UNIT

EC UNIT

E35INV UNIT

10% 10% 10% 10% 10% 10%

FK/L E35INV E35INV E35INV

RNNAID LLP...1EC

RNNAID LLP...4EC

RNNAID LLP...E35INV

EC/L/R

100% 100%

EC/L/R

100% 100%

EC/L/R

100% 100%

EC/L/R

100% 100%

EC/L/R

100% 100%100% 100%

10% 10% 10% 10% 10% 10%

Drawing #:

Date:

Scale:

Sheet:

PREP

ARED

FO

R:

DR

AWIN

G T

YPE:

Drawn By:

DWG Ref:

DE

SIG

N &

AP

PLI

CA

TIO

NS

PRO

JEC

T N

AME:

NAM

E

RFA

# X

XXXX

-X

SUBM

ITTA

L FO

R A

PPR

OVA

L

AXXX

DATE

ANSI B

XXX

MLX.3

RNNAID LLP ...WEC



renna led type: project

Documents