renault scenic trim and upholstery

108
© Renault s.a.s. 2005 "The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared. The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed." All copyrights reserved by Renault. The reproduction or translation in part of whole of the present document, as well as the use of the spare parts reference numbering system, are prohibited without the prior written consent of Renault. 77 11 322 182 FEBRUARY 2004 Edition Anglaise X84, and J84 7 Trim and upholstery 71A BODY INTERIOR TRIM 72A SIDE OPENING ELEMENT LINING 73A NON-SIDE OPENING ELEMENT LINING 75A FRONT SEAT FRAMES AND RUNNERS 76A REAR SEAT FRAMES AND RUNNERS 77A FRONT SEAT TRIM 78A REAR SEAT LINING

Upload: wofeba

Post on 10-Oct-2014

1.674 views

Category:

Documents


70 download

TRANSCRIPT

Page 1: Renault Scenic Trim and Upholstery

© Renault s.a.s. 2005

"The repair methods given by the manufacturer in this document are based on the technicalspecifications current when it was prepared.

The methods may be modified as a result of changes introduced by the manufacturer in theproduction of the various component units and accessories from which his vehicles areconstructed."

All copyrights reserved by Renault.

The reproduction or translation in part of whole of the present document, as well as the useof the spare parts reference numbering system, are prohibited without the prior writtenconsent of Renault.

77 11 322 182 FEBRUARY 2004 Edition Anglaise

X84, and J84

7 Trim and upholstery

71A BODY INTERIOR TRIM

72A SIDE OPENING ELEMENT LINING

73A NON-SIDE OPENING ELEMENT LINING

75A FRONT SEAT FRAMES AND RUNNERS

76A REAR SEAT FRAMES AND RUNNERS

77A FRONT SEAT TRIM

78A REAR SEAT LINING

Page 2: Renault Scenic Trim and Upholstery

Scénic II - Section 7

Contents

Page

Scénic II - Section 7ContentsPage

71A BODY INTERIOR TRIM

Luggage compartment floor lining: Removal - Refitting 71A-1

Centre floor front carpet: Removal - Refitting 71A-3

Centre floor rear carpet: Removal - Refitting 71A-7

Luggage compartment carpet: Removal - Refitting 71A-12

Headlining: Removal - Refitting 71A-13

Front door sill lining: Removal - Refitting 71A-19

B-pillar lower trim: Removal - Refitting 71A-20

Rear door sill lining: Removal - Refitting 71A-21

C-pillar lower trim: Removal - Refitting 71A-23

Rear wheel arch lining: Removal - Refitting 71A-24

A-pillar trim: Removal - Refitting 71A-28

B-pillar upper trim: Removal - Refitting 71A-29

Rear quarter panel trim: Removal - Refitting 71A-30

Rear end panel lining: Removal - Refitting 71A-33

72A SIDE OPENING ELEMENT LINING

Front side door trim: Removal - Refitting 72A-1

Front door flap: Removal - Refitting 72A-4

Rear side door trim: Removal - Refitting 72A-6

Rear door flap: Removal - Refitting 72A-8

73A NON-SIDE OPENING ELEMENT LINING

Tailgate lining: Removal - Refitting 73A-1

Bonnet soundproofing: Removal - Refitting 73A-3

75A FRONT SEAT FRAMES AND RUNNERS

Fixed front seat frame: Removal - Refitting 75A-1

Complete front seat: Removal - Refitting 75A-6

Front seat runner: Removal - Refitting 75A-8

76A REAR SEAT FRAMES AND RUNNERS

Complete rear seat: Removal - Refitting 76A-1

Second row complete rear seat: Removal - Refitting 76A-7

Page 3: Renault Scenic Trim and Upholstery

Contents

Second row rear seat frame: Removal - Refitting 76A-11

Rear side seat mechanism: Removal - Refitting 76A-12

Rear central seat runners: Removal - Refitting 76A-14

Rear seat runner: Removal - Refitting 76A-16

77A FRONT SEAT TRIM

Front seatback trim: Removal - Refitting 77A-1

Front seat base trim: Removal - Refitting 77A-9

78A REAR SEAT LINING

Rear seatback trim: Removal - Refitting 78A-1

Second row rear seat trim: Removal - Refitting 78A-4

Rear side seat trim: Removal - Refitting 78A-9

Rear centre seat trim: Removal - Refitting 78A-17

Rear seat base trim: Removal - Refitting 78A-20

76A REAR SEAT FRAMES AND RUNNERS

Page 4: Renault Scenic Trim and Upholstery

71A-1

BODY INTERIOR TRIMLuggage compartment floor lining: Removal - Refitting

LONG CHASSIS

71A

REMOVAL

Remove the boot carpet.

Turn:

- the catches (1) a quarter turn anticlockwise,

- the catch (2) a quarter turn clockwise.

Remove the flap.

Unclip the centre stalk cover (3) .

Turn the catch (4) a quarter turn anticlockwise.

Remove the flap.

Remove the cover (5) .

Remove the parking brake release handle.

Tightening torquesm

mounting bolts 2.1 daNm

107117

107118

21

3

4

107115

22274

5

Page 5: Renault Scenic Trim and Upholstery

71A-2

BODY INTERIOR TRIMLuggage compartment floor lining: Removal - Refitting

LONG CHASSIS

71A

Remove:

- the bolts (6) ,

- the side trim panels.

Remove the bolts (7) and (8) .

Remove the centre trim.

REFITTING

Proceed in the reverse order to removal.

Torque tighten the mounting bolts ( 2.1 daNm ) .

107116

107115

66

777

8

Page 6: Renault Scenic Trim and Upholstery

71A-3

BODY INTERIOR TRIMCentre floor front carpet: Removal - Refitting 71A

REMOVALRemove:

- the front seats (see 75A, Front seat frames andrunners, Complete front seat: Removal - Refit-ting, page 75A-6) (observing the safety instruc-tions),

- the centre console( (see Centre console: Remo-val - Refitting) ,

- the floor storage compartments and flaps( (seeFloor flap and storage: Removal - Refitting) ,((see Underseat flap and storage: Removal - Re-fitting) .

Unclip the trim (1) .

Remove the trim (2) .

Unclip:

- the floor sill lining (3) ,

- the door sill lining (4) and (5) .

Remove the retaining clips using clip removal pliers.

Remove the carpet.

Tightening torquesm

seat height adjustermounting bolts

2.1 daNm

104145

1

2

104220

104217

3

4

5

Page 7: Renault Scenic Trim and Upholstery

71A-4

BODY INTERIOR TRIMCentre floor front carpet: Removal - Refitting 71A

Unclip the side trim (6) .

Unclip the front half-floor.

Unclip the seat connector from the clip.

Remove the seat height adjuster mounting bolts.

Remove the duct.

104219

Note:

An aerial is clipped on the driver's side trim(depending on equipment level).

104209

6

104221

Note:

Depending on the equipment level, the ventila-tion ducts may make it necessary to remove theseat height adjuster.

104200

Page 8: Renault Scenic Trim and Upholstery

71A-5

BODY INTERIOR TRIMCentre floor front carpet: Removal - Refitting 71A

Remove the intermediate duct.

Remove the soundproofing padding.

Remove the gear lever knob.

Unclip the gear lever gaiter.

104202

104208

Note:

To remove the driver's side soundproofing pad-ding, it must be cut away from the steeringcolumn.

103598

103600

Page 9: Renault Scenic Trim and Upholstery

71A-6

BODY INTERIOR TRIMCentre floor front carpet: Removal - Refitting 71A

Unclip the upper trim.

Disconnect the connector.

Remove:

- the three mounting bolts,

- the side clips.

Disconnect the various connectors.

Unclip the trim.

Remove the trim.

Remove the centre soundproofing pad.

REFITTING

Torque tighten the seat height adjuster mountingbolts ( 2.1 daNm ) .

Proceed in the reverse order to removal.

103601

103603

103604

103586

Page 10: Renault Scenic Trim and Upholstery

71A-7

BODY INTERIOR TRIMCentre floor rear carpet: Removal - Refitting 71A

REMOVAL

Remove:

- the front seats (see 75A, Front seat frames andrunners, Complete front seat: Removal - Refit-ting, page 75A-6) (observing the safety instruc-tions),

- the centre console( (see Centre console: Remo-val - Refitting) ,

- the rear seats,

- the boot carpet (see 71A, Body interior trim, Lug-gage compartment carpet: Removal - Refitting,page 71A-12) ,

- the floor storage compartments and flaps( (seeFloor flap and storage: Removal - Refitting) ,((see Underseat flap and storage: Removal - Re-fitting) .

Unclip the trim (1) .

Remove the trim (2) .

Unclip:

- the floor sill lining (3) ,

- the door sill lining (4) and (5) .

Equipment required

diagnostic tool

Tightening torquesm

seat height adjustermounting bolts

2.1 daNm

WARNING

Before carrying out any work on a safety systemcomponent, lock the air bag computer using the(diagnostic tool) ( (see 8 , Electrical equip-ment) ). When this function is activated, all thetrigger lines are inhibited and the air bag warninglight on the instrument panel lights up conti-nuously (ignition on).

104145

104220

1

2

3

4

5

Page 11: Renault Scenic Trim and Upholstery

71A-8

BODY INTERIOR TRIMCentre floor rear carpet: Removal - Refitting 71A

Unclip the trim (6) and (7) .

Unclip the upper door sill lining.

Unclip:

- the rear seats mounting rail trim,

- the 12 V supply plate.

Disconnect the connectors.

Remove:

- the rail mounting bolts (8) ,

- the rail,

- the retaining pins (9) .

104359

104360

6

7

104150

104151

9

88

Page 12: Renault Scenic Trim and Upholstery

71A-9

BODY INTERIOR TRIMCentre floor rear carpet: Removal - Refitting 71A

Remove the carpet.

Remove the clips using the unclipping pliers.

Remove:

- the plastic rivets,

- the plate.

Remove the soundproofing pad.

104218

104214

104212

104215

Page 13: Renault Scenic Trim and Upholstery

71A-10

BODY INTERIOR TRIMCentre floor rear carpet: Removal - Refitting 71A

Remove the bolt (10) .

Unclip the raised floor.

Remove the carpet from the storage compartments.

Unclip the raised floor support.

Partially remove the front carpet.

104211

104216

10

104210

104217

Page 14: Renault Scenic Trim and Upholstery

71A-11

BODY INTERIOR TRIMCentre floor rear carpet: Removal - Refitting 71A

Unclip the front half-floor.

Unclip the seat connector from the clip.

Remove the seat height adjuster mounting bolts.

Remove the centre soundproofing pad.

REFITTING

Torque tighten the seat height adjuster mountingbolts ( 2.1 daNm ) .

Proceed in the reverse order to removal.

104209

104221

104213

Page 15: Renault Scenic Trim and Upholstery

71A-12

BODY INTERIOR TRIMLuggage compartment carpet: Removal - Refitting 71A

REMOVAL

Unclip the clips (1) using the unclipping pliers.

Remove the boot carpet.

REFITTING

Check the clips are secure.

Proceed in the reverse order to removal.

104446

1

Page 16: Renault Scenic Trim and Upholstery

71A-13

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

REMOVAL

Remove:

- the windscreen pillar trim (see 71A, Body interiortrim, A-pillar trim: Removal - Refitting, page71A-28) ,

- the sun visors( (see Sun visor: Removal - Refit-ting) .

Partially remove:

- the door frame seals,

- the tailgate seal.

Unclip the upper casing (1) .

Unclip the lower casing (2) .

Special tooling required

Car. 1597 Lever for removingrear grab handle clips

Equipment required

diagnostic tool

IMPORTANT

Before carrying out any work on a safety systemcomponent, lock the air bag computer using the(diagnostic tool) ( (see 8, Electrical equipment)). When this function is activated, all the triggerlines are inhibited and the air bag warning light onthe instrument panel lights up continuously (igni-tion on).

WARNING

The frame seals should be handled carefully toavoid any risk of damage or marking.

101715

101716

1

2

Page 17: Renault Scenic Trim and Upholstery

71A-14

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

Disconnect the connectors.

Remove the interior rear-view mirror (3) .

Undo the seat belt by pressing the catch (4) .

Unclip the upper section of the trim (5) .

Remove the trim (6) .

Partially remove the door seals.

Unclip the lower retaining clips (7) .

101717

When removing the rear-view mirror, be carefulnot to damage the nearby rain sensor.

18828

3

4

104145

104143

6

5

7

Page 18: Renault Scenic Trim and Upholstery

71A-15

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

Remove:

- the trim (8) and (9) ,

- the seat belt buckle via the aperture (10) .

Unclip the trim (11) and (12) .

Unclip the upper door sill lining (13) .

Unclip the light.

Disconnect the connector.

Remove the three trim mounting bolts (14) .

Partially remove:

- the tailgate seal,

- the rear door seal.

104146

104359

8

9

10

12

11

104360

104363

13

13

1414

Page 19: Renault Scenic Trim and Upholstery

71A-16

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

Remove the wheel arch interior trim (partially).

Unclip the trim (15) .

Remove the seat belt web via the aperture (16) .

Remove:

- the plate nut (depending on equipment level).

- the belt from the rear quarter panel trim.

Unclip the two mounting pins (17) using tool (Car.1597) .

Remove the part, pulling it off by hand from above.

104362

Note:

There is no need to remove the boot carpet, orfully detach the wheel arch interior trim.

104361

16

15 15

103842

100183

17

Page 20: Renault Scenic Trim and Upholstery

71A-17

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

Unclip the trim.

Press on the clip (18) .

Remove the trim retaining clips towards the rear (19).

Carefully unclip the trim (this operation requires twopeople).

Fit the trim on the head rests (this operation requirestwo people).

Disconnect the various connectors.

Carefully remove the trim via the tailgate to preventit bending (this operation requires two people).

104348 103922

97193

1819

Page 21: Renault Scenic Trim and Upholstery

71A-18

BODY INTERIOR TRIMHeadlining: Removal - Refitting 71A

SPECIAL NOTES ON REMOVING THE HEADLINING FROM A ROOF WITH A SUNROOF:

Remove the sunroof switch using unclipping pliers,protecting the trim.

Disconnect the connectors.

REFITTING

Return the trim via the tailgate.

Connect the connectors (wiring on trim).

Centre the trim while fitting the grab handles.

Check the condition of the clips (20) before refittingthe trim (part no. 82 00 100 314 ).

Proceed in the reverse order to removal.

Note:

The procedure deals only with componentswhich are present if the vehicle is fitted with asunroof. The rest of the procedure is the same asfor a model without a sunroof.

101983

WARNING

The trim must be handled carefully because cut-ting the sunroof makes the two side edges morefragile (risk of bending).

104352

101315

WARNING

The Carminat aerial wire is attached to the left-hand windscreen pillar mounting clips.

2020

Page 22: Renault Scenic Trim and Upholstery

71A-19

BODY INTERIOR TRIMFront door sill lining: Removal - Refitting 71A

REMOVAL

Unclip the upper section of the trim (1) .

Remove the trim (2) .

Unclip:

- the floor sill lining (3) ,

- the door sill lining (4) and (5) .

REFITTING

Proceed in the reverse order to removal.

104145

104220

2

1

5

4

3

Page 23: Renault Scenic Trim and Upholstery

71A-20

BODY INTERIOR TRIMB-pillar lower trim: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Unclip the upper section of the trim (1) .

Remove the trim (2) .

REFITTINGProceed in the reverse order to removal.

104145

1

2

Page 24: Renault Scenic Trim and Upholstery

71A-21

BODY INTERIOR TRIMRear door sill lining: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Unclip the upper section of the trim (1) .

Remove the trim (2) .

Unclip the trim (3) and (4) .

REFITTING

Proceed in the reverse order to removal.

104145

104359

1

2

3

4

Page 25: Renault Scenic Trim and Upholstery

71A-22

BODY INTERIOR TRIMRear door sill lining: Removal - Refitting

LONG CHASSIS

71AREMOVAL

Tilt the second row seat.

Partially unclip the rear inner sill lower trim.

Remove:

- the parcel shelf mounting bolts (1) ,

- the parcel shelf.

Unclip the rear inner sill upper trim.

REFITTING

Proceed in the reverse order to removal.

107111

107110

1

107108

Page 26: Renault Scenic Trim and Upholstery

71A-23

BODY INTERIOR TRIMC-pillar lower trim: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Unclip the upper section of the trim (1) .

Remove the trim (2) .

Unclip the trim (3) and (4) .

Unclip the upper door sill lining (5) .

REFITTING

Proceed in the reverse order to removal.

Equipment required

diagnostic tool

IMPORTANT

Before carrying out any work on a safety systemcomponent, lock the air bag computer using the(diagnostic tool) ( (see 8 , Electrical equip-ment) ). When this function is activated, all thetrigger lines are inhibited and the air bag warninglight on the instrument panel lights up conti-nuously (ignition on).

104145

2

1

104359

104360

4

3

5

5

Page 27: Renault Scenic Trim and Upholstery

71A-24

BODY INTERIOR TRIMRear wheel arch lining: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Unclip the upper section of the trim (1) .

Remove the trim (2) .

Unclip the trim (3) and (4) .

Unclip the upper door sill lining (5) .

Equipment required

diagnostic tool

IMPORTANT

Before carrying out any work on a safety systemcomponent, lock the air bag computer using the(diagnostic tool) ( (see 8 , Electrical equip-ment) ). When this function is activated, all thetrigger lines are inhibited and the air bag warninglight on the instrument panel lights up conti-nuously (ignition on).

104145

2

1

104359

104360

4

3

5

5

Page 28: Renault Scenic Trim and Upholstery

71A-25

BODY INTERIOR TRIMRear wheel arch lining: Removal - Refitting 71A

Unclip the light.

Disconnect the connector.

Remove:

- the three trim mounting bolts (6) ,

- the boot carpet.

Partially remove:

- the tailgate seal,

- the rear door seal.

Remove the wheel arch interior trim.

REFITTING

Proceed in the reverse order to removal.

104363

104362

66

Page 29: Renault Scenic Trim and Upholstery

71A-26

BODY INTERIOR TRIMRear wheel arch lining: Removal - Refitting

LONG CHASSIS

71AREMOVAL

Remove:

- the boot storage compartments,

- the trims,

- the rear end panel trim ( (see 71A, Body interiortrim) ).

Remove:

- the bolts (1) ,

- the parcel shelf.

Tilt the rear seat.

Partially unclip the rear inner sill lower trim.

Unclip the rear inner sill upper trim.

107119

107110

1

107111

107108

Page 30: Renault Scenic Trim and Upholstery

71A-27

BODY INTERIOR TRIMRear wheel arch lining: Removal - Refitting

LONG CHASSIS

71A

Remove the boot light (2) .

Disconnect the light connector.

Remove the wheel arch trim.

REFITTING

Proceed in the reverse order to removal.

107107

107107

2

Page 31: Renault Scenic Trim and Upholstery

71A-28

BODY INTERIOR TRIMA-pillar trim: Removal - Refitting 71A

REMOVAL

Partially remove the seal.

Unclip the trim (1) and (2) .

REFITTING

Check the condition of the clips (3) before refittingthe trim (part no.: 82 00 100 314 ).

Proceed in the reverse order to removal.

Note:

The seals should be handled carefully to preventany risk of damage or marking.

104050

1

2101315

WARNING

The Carminat aerial wire is attached to the left-hand windscreen pillar mounting clips.

33

Page 32: Renault Scenic Trim and Upholstery

71A-29

BODY INTERIOR TRIMB-pillar upper trim: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Undo the seat belt by pressing the catch (1) .

Unclip the upper section of the trim (2) .

Remove the trim (3) .

Partially remove the door seals.

Unclip the lower retaining clips (4) .

Remove:

- the trim (5) and (6) ,

- the seat belt web via the aperture (7) .

REFITTING

Proceed in the reverse order to removal.

18828

104145

1

2

3

104143

104146

4

5

6

7

Page 33: Renault Scenic Trim and Upholstery

71A-30

BODY INTERIOR TRIMRear quarter panel trim: Removal - Refitting 71A

REMOVAL

Move the front seat forward.

Unclip the upper section of the trim (1) .

Remove the trim (2) .

Unclip the trim (3) and (4) .

Unclip the upper door sill lining (5) .

Equipment required

diagnostic tool

IMPORTANT

Before carrying out any work on a safety systemcomponent, lock the air bag computer using the(diagnostic tool) ( (see 8 , Electrical equip-ment) ). When this function is activated, all thetrigger lines are inhibited and the air bag warninglight on the instrument panel lights up conti-nuously (ignition on).

104145

2

1

104359

104360

4

3

5

5

Page 34: Renault Scenic Trim and Upholstery

71A-31

BODY INTERIOR TRIMRear quarter panel trim: Removal - Refitting 71A

Unclip the light.

Disconnect the connector.

Remove the three trim mounting bolts (6) .

Partially remove:

- the tailgate seal,

- the rear door seal.

Remove the wheel arch interior trim (partially).

Unclip the trim (7) .

Remove the seat belt web via the aperture (8) .

REFITTING

Proceed in the reverse order to removal.

104363

66

104362

Note:

There is no need to remove the boot carpet, orfully detach the wheel arch interior trim.

104361

77

8

Page 35: Renault Scenic Trim and Upholstery

71A-32

BODY INTERIOR TRIMRear quarter panel trim: Removal - Refitting

LONG CHASSIS

71A

REMOVAL

Remove the wheel arch trim (see (see 71A, Bodyinterior trim) ).

Remove:

- the bolts (1) ,

- the seat belt guide.

Remove:

- the belt bolt cover (2) ,

- the bolt.

Remove the belt guide with a flathead screwdriver(3) .

Remove:

- the rear quarter panel trim,

- the seat belt web via the aperture.

REFITTING

Torque tighten the seat belt mounting bolts ( 2.1daNm ) .

Proceed in the reverse order to removal.

Tightening torquesm

seat belt mounting bolts 2.1 daNm

107106

107105

1

2

107104

107240

3

1

2 2

Page 36: Renault Scenic Trim and Upholstery

71A-33

BODY INTERIOR TRIMRear end panel lining: Removal - Refitting 71A

REMOVAL

Remove the blanking covers (1) .

Partially remove the luggage compartment seal.

Remove:

- the bolts (2) ,

- the rear end panel trim.

REFITTING

Proceed in the reverse order to removal.

104437

104436

11

22

Page 37: Renault Scenic Trim and Upholstery

71A-34

BODY INTERIOR TRIMRear end panel lining: Removal - Refitting

LONG CHASSIS

71AREMOVAL

Partially remove the luggage compartment seal.

Remove:

- the blanking covers,

- the bolts,

- the rear end panel trim.

REFITTINGProceed in the reverse order to removal.

107120

107119

11

Page 38: Renault Scenic Trim and Upholstery

72A-1

SIDE OPENING ELEMENT LININGFront side door trim: Removal - Refitting 72A

REMOVAL

Protect the trim (using a mastic knife for example).

Unclip the window winder plate (at the front) usingthe unclipping pliers, for the left-hand door.

Disconnect the connectors.

Remove the plate.

Unclip the window winder plate (at the rear) usingthe unclipping pliers, for the right-hand door.

Disconnect the connector.

Unclip the pull handle trim.

Note:

In the event of a door replacement or operation onthe bodywork (see 47A, Side opening elements,Front side door ).

103803

106328

103930

Page 39: Renault Scenic Trim and Upholstery

72A-2

SIDE OPENING ELEMENT LININGFront side door trim: Removal - Refitting 72A

Remove:

- the storage compartment plastic rivet,

Insert a hand to the base of the storage compart-ment.

Push your hand towards the interior of the door boxsection until the storage compartment unclips.

Remove the storage compartment from its housing.

Remove the two pull handle bolts (1) .

Unclip the flap with the unclipping pliers (while pro-tecting the lower trim).

Remove the flap.

103929

114170

114171

WARNING

Do not pull on the storage compartment cover.

103931

1

Page 40: Renault Scenic Trim and Upholstery

72A-3

SIDE OPENING ELEMENT LININGFront side door trim: Removal - Refitting 72A

Remove the door opening control cover and bolt (2) .

Unclip:

- the opening control cable mounting cover with aflat-blade screwdriver,

- the rear-view mirror adjustment control (3) ,

- the light.

Remove the handle.

Disconnect the connectors.

Remove:

- the three bolts (4) ,

- the trim (5) , (6) and (7) (partially).

Disconnect the speaker connector.

Unclip the wiring harness from the trim.

REFITTING

Proceed in the reverse order to removal.

105007

105008

2

3

103933

WARNING

If necessary, replace the adhesive sealing foamaround the window winder plate connector toensure it is water-tight.

Note:

For replacement, the trim is delivered separately,so remember the wiring harness routing.

4

4

5

6

7

Page 41: Renault Scenic Trim and Upholstery

72A-4

SIDE OPENING ELEMENT LININGFront door flap: Removal - Refitting 72A

REMOVAL

Unclip the window winder plate (at the front) usingthe unclipping pliers, for the left-hand door.

Disconnect the connector.

Remove the plate.

Unclip the window winder plate (at the rear) usingthe unclipping pliers, for the right-hand door.

Disconnect the connector.

Unclip the pull handle trim.

Note:

If replacing a door or carrying out a bodywork ope-ration ( (see 47A, Side opening elements) ).

103803

106328

103930

Page 42: Renault Scenic Trim and Upholstery

72A-5

SIDE OPENING ELEMENT LININGFront door flap: Removal - Refitting 72A

Remove:

- the storage compartment plastic rivet,

- the storage compartment.

Remove the two pull handle bolts (1) .

Unclip the flap with the unclipping pliers (while pro-tecting the lower trim).

Remove the flap.

REFITTING

Proceed in the reverse order to removal.

103929

WARNING

Do not pull on the glovebox cover.

103931

1

Page 43: Renault Scenic Trim and Upholstery

72A-6

SIDE OPENING ELEMENT LININGRear side door trim: Removal - Refitting 72A

REMOVAL

Remove:

- the cover,

- the window winder plate bolt,

- the plate.

Disconnect the connector.

Remove:

- the cover,

- the door opening control bolt (1) .

Using a flathead screwdriver, unclip the openingcontrol cable mounting cover.

Unclip the flap with the unclipping pliers (while pro-tecting the lower trim).

Remove the flap.

Unclip the light (2) with a flathead screwdriver.

Disconnect the connector.

Note:

If replacing a door or carrying out a bodywork ope-ration ( (see 47A, Side opening elements) ).

103868

1

103869

103870

2

Page 44: Renault Scenic Trim and Upholstery

72A-7

SIDE OPENING ELEMENT LININGRear side door trim: Removal - Refitting 72A

Unclip the sun vi sor (3) (only remove if replacing).

Remove:

- the bolt (4) ,

- the bolt (5) ,

- the trim (6) and (7) (partially).

Disconnect the speaker connector.

Unclip the wiring harness from the trim.

REFITTING

Proceed in the reverse order to removal.

103871

Note:

When replacing the visor, do not unwind it beforefitting it on the trim; a clip maintains the visor'stension before fitting.

WARNING

If necessary, replace the adhesive sealing foamaround the window winder plate connector toensure it is leaktight.

Note:

For replacement, the trim will be delivered sepa-rately, so remember the wiring harness routing.

3

4

5

6

7

Page 45: Renault Scenic Trim and Upholstery

72A-8

SIDE OPENING ELEMENT LININGRear door flap: Removal - Refitting 72A

REMOVAL

Remove:

- the cover,

- the window winder plate bolt.

Disconnect the plate.

Disconnect the connector.

Remove:

- the cover,

- the door opening control bolt (1) .

Using a flathead screwdriver, unclip the openingcontrol cable mounting cover.

Unclip the flap with the unclipping pliers (while pro-tecting the lower trim).

Remove the flap.

Note:

If replacing a door or carrying out a bodywork ope-ration ( (see 47A, Side opening elements) ).

103868

1

103869

103870

Page 46: Renault Scenic Trim and Upholstery

72A-9

SIDE OPENING ELEMENT LININGRear door flap: Removal - Refitting 72A

REFITTING

Proceed in the reverse order to removal.

WARNING

If necessary, replace the adhesive sealing foamaround the window winder plate connector toensure it is leaktight.

Page 47: Renault Scenic Trim and Upholstery

73A-1

NON-SIDE OPENING ELEMENT LININGTailgate lining: Removal - Refitting 73A

REMOVING THE TAILGATE TRIM FROM A NON-OPENING REAR SCREEN

Unclip the upper trim.

Remove the four centre lower trim bolts.

Unclip:

- the lock cover,

- the centre trim.

Unclip the side trim panels.

REMOVING THE TAILGATE TRIM FROM AN OPENING REAR SCREEN

Unclip the upper trim.

Disconnect the light connector.

103542

103543

103545

Note:

If there is a problem with the rear parcel shelfretaining pin (1) , the pin is available at retail as aspare part, and can be replaced individually.

104514

1

Page 48: Renault Scenic Trim and Upholstery

73A-2

NON-SIDE OPENING ELEMENT LININGTailgate lining: Removal - Refitting 73A

Remove the four centre lower trim bolts.

Unclip:

- the lock cover,

- the centre trim.

Remove the rams.

Unclip the side trim panels.

Unclip the opening rear screen motor trim.

REFITTING

Proceed in the reverse order to removal.

104515

104504

104503

Note:

If there is a problem with the rear parcel shelfretaining pin, the pin is available at retail as aspare part, and can be replaced individually.

104520

Page 49: Renault Scenic Trim and Upholstery

73A-3

NON-SIDE OPENING ELEMENT LININGBonnet soundproofing: Removal - Refitting 73A

REMOVAL

Unclip the clips with the unclipping pliers.

REFITTINGReplace the clips if necessary.

Proceed in the reverse order to removal.

104349

Page 50: Renault Scenic Trim and Upholstery

75A-1

FRONT SEAT FRAMES AND RUNNERSFixed front seat frame: Removal - Refitting

LONG CHASSIS

75A

I - REMOVAL

Remove:

- the complete front seat (see 75A, Front seat fra-mes and runners ) (observe the safety instruc-tions),

- the seatback trim (see 77A, Front seat trim, Frontseat seatback trim ).

- the seat base trim (see 77A, Front seat trim,Front seat base trim ),

- the runners (see 75A, Front seat frames and run-ners, Front seat runners ).

1 - Driver's seat

Disconnect:

- the connector, (1)

- the airbag module earth terminal.

Drill out the rivet (2) .

Remove the airbag.

Remove the back adjustment mechanism cover.

Remove the control cable sheath stops.

Drill out the (3) lumbar adjustment mechanism rivet.

Remove the mechanism.

Tightening torquesm

seat back mountingbolts

25 Nm

seat back mountingnuts

66 Nm

102167

1

2

102164

102175

3

Page 51: Renault Scenic Trim and Upholstery

75A-2

FRONT SEAT FRAMES AND RUNNERSFixed front seat frame: Removal - Refitting

LONG CHASSIS

75A

Remove:

- the runner adjustment handle mounting bolt,

- the handle.

Carry out the same operation on the seat back ad-justing handle.

Remove:

- the unlocking control cables,

- the front casing.

Unclip the seatback unlocking linkage.

Remove the cable.

102174

102173

102172

Note:

When replacing the seatback hinge control adjustment cable:

- position the cable,

- make sure that the seatback is not in the fullyforward position,

- keep the cable pressed down (with a wedge)between the sheath stop and the linkage to pro-vide additional clearance,

- lock the sheath in place with pliers.

Page 52: Renault Scenic Trim and Upholstery

75A-3

FRONT SEAT FRAMES AND RUNNERSFixed front seat frame: Removal - Refitting

LONG CHASSIS

75A

Unclip:

- the cover,

- the cable stop (4) .

Remove bolts (6) .

102171

4

102390

IMPORTANT

Insert a metal rod right through the frame viaopening (5) , strapping it in place if necessary.Check that it is secure before carrying out anywork.

IMPORTANT

Keep the pin in position when removing the bolts.

5

6

Page 53: Renault Scenic Trim and Upholstery

75A-4

FRONT SEAT FRAMES AND RUNNERSFixed front seat frame: Removal - Refitting

LONG CHASSIS

75A

Remove:

- the bolts (7) ,

- the backrest frame.

2 - Passenger seat

Unclip the side cover.

Remove the three bolts (9) .

102393

104490

77

104489

IMPORTANT

Insert a metal rod right through the frame viaopening (8) , strapping it in place if necessary.Check that it is secure before carrying out anywork.

IMPORTANT

Keep the pin in position when removing the bolts.

8

99

Page 54: Renault Scenic Trim and Upholstery

75A-5

FRONT SEAT FRAMES AND RUNNERSFixed front seat frame: Removal - Refitting

LONG CHASSIS

75A

Remove the nuts (10) .

II - REFITTING

Hand-tighten the frame mountings.

Tighten to torque:

- the seat back mounting bolts ( 25 Nm ) (12) ,

- the seat back mounting nuts ( 66 Nm ) (13) .

Cut the plastic clip (11) .

Proceed in the reverse order to removal.

104488

Note:

The refitting method and the tightening torquesof the passenger seat are exactly the same as forthe driver's seat.

10

10

102390

IMPORTANT

Do not remove the plastic clip at (11) .

Check that it is secure before carrying out anywork; if in any doubt, insert a pin through theparts of the frames (11) .

11

12

1313

Page 55: Renault Scenic Trim and Upholstery

75A-6

FRONT SEAT FRAMES AND RUNNERSComplete front seat: Removal - Refitting 75A

REMOVAL

Disconnect the battery by starting with the positiveterminal (see 80A, Battery: Remove and refit ).

Protect:

- the front door sill lining,

- the carpet.

Undo the seat belt by pressing the catch (1) .

Move the seat to the forward position.

Remove the r ear mounting bolts.

Equipment required

diagnostic tool

Tightening torquesm

front seat inside andoutside rear bolts

21 Nm

front seat inside andoutside front bolts

21 Nm

battery terminals 12 Nm

IMPORTANT

- Before any work is carried out on a safety systemcomponent, be sure to lock the airbag computerusing the (diagnostic tool) (see 88C, Air bagsand pretensioners, Air bag computer lockingprocedure ). When this function is activated, allthe trigger lines are disabled and the airbag instru-ment panel warning light is lit when ignition is swit-ched on.

IMPORTANT

Handling pyrotechnic systems (airbags or preten-sioners) near to a source of heat or flame is for-bidden: there is a risk of triggering the air bagsand pretensioners.

18828

104148

1

Page 56: Renault Scenic Trim and Upholstery

75A-7

FRONT SEAT FRAMES AND RUNNERSComplete front seat: Removal - Refitting 75A

Move the seat to the rear position.

Remove the front mounting bolts.

Disconnect the connector under the seat.

Remove the seat (this operation requires two peo-ple).

REFITTING

Position and lock the seat at the rear before refittingit in the vehicle.

Front left-hand seat

Pre-tighten the front outside and inside bolts.

Move the seat forwards by checking the symmetry ofthe left and right runner positions.

Torque tighten the front seat inside and outsiderear bolts ( 21 Nm ) .

Move the seat back.

Torque tighten the front seat inside and outsidefront bolts ( 21 Nm ) .

Torque tighten the battery terminals ( 12 Nm ) .

104147

104149

WARNING

Observe the tightening order for the seat bolts.

102189

WARNING

Connect the battery, starting with the positive ter-minal; carry out the necessary programming (see80A, Battery: Remove and refit ).

IMPORTANT

Unlock the air bag computer using the (diagnos-tic tool) (see 88C, Airbags and pretensioners,Airbag computer locking procedure).

1

3

2

4

Page 57: Renault Scenic Trim and Upholstery

75A-8

FRONT SEAT FRAMES AND RUNNERSFront seat runner: Removal - Refitting 75A

REMOVALRemove the whole front seat (see 75A, Front seatframes and runners, Complete front seat ), (ob-serve the safety instructions).

Driver's seat left-hand runner

Remove the two nuts (1) .

Driver's seat right-hand runner

Remove the three bolts (2) .

REFITTINGTorque tighten the seat runner mounting bolts ( 21Nm ) .

Proceed in the reverse order to removal.

Tightening torquesm

seat runner mountingbolts

21 Nm

102394

1

102395

22

Page 58: Renault Scenic Trim and Upholstery

76A-1

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

I - REMOVAL

Remove:

- the seat from the vehicle,

- the head rest.

1 - Side rear seat

Remove the seatback cover trim.

Unclip the clips (1) .

Remove the seat belt guide (2) .

Remove:

- the bolts (3) ,

- the stalk

Remove:

- the bolt (4) ,

- the stalk.

Unclip:

- the blanking cover (5) ,

- the seatback unlocking control.

Tightening torquesm

"frame and runner"assembly mount ingbolts

25 Nm

110831

1

2

103529

103527

3

4

5

Page 59: Renault Scenic Trim and Upholstery

76A-2

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

Remove the clips (6) using the unclipping pliers.

Drill out rivets (7) .

Slightly lift the plastic casing.

Unclip the hook cover securing straps (8) .

Remove the inside cover retaining strips.

103524

103523

66

7

110835

103525

8

Page 60: Renault Scenic Trim and Upholstery

76A-3

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

Remove the side cover retaining strips.

Fold the seat base cover forward.

Remove:

- the seat base cover,

- the foam.

Tilt back the seatback.

Pull out the zip fastener ends (9) .

103521

103520

103519

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

103518

9

Page 61: Renault Scenic Trim and Upholstery

76A-4

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

Remove the seatback cover as far as the head restguides.

Press onto the clips (10) to remove the head restguides.

Remove the seatback cover.

Remove the seatback foam.

103516

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

103515

10

103517

Page 62: Renault Scenic Trim and Upholstery

76A-5

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

2 - Special features of the central rear seat seatback trim

Unclip the casing using a flat-blade screwdriver.

Unclip:

- the retaining strips,

- the head rest guides.

Remove the seatback cover.

104674

104675

Note:

The casing mounting clips can be seen in thediagram above.

104676

104677

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

Page 63: Renault Scenic Trim and Upholstery

76A-6

REAR SEAT FRAMES AND RUNNERSComplete rear seat: Removal - Refitting 76A

Unclip the hook cover securing straps (11) .

Remove the seat base cover.

Remove the seat base foam.

Remove:

- the seat belt stalk mounting nuts,

- the nuts.

II - REFITTING

Proceed in the reverse order to removal.

Torque tighten the "frame and runner" assemblymounting bolts ( 25 Nm ) .

104679

104680

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

11

104681

104682

WARNINGBefore refitting the covers, check that that velcrostr ips on the seatback foam and the seat basefoam are holding.

Page 64: Renault Scenic Trim and Upholstery

76A-7

REAR SEAT FRAMES AND RUNNERSSecond row complete rear seat: Removal - Refitting

LONG CHASSIS

76A

Unlocking the second row rear seat.

REMOVAL

SPECIAL FEATURES OF THE SECOND ROW OF REAR SEATS

Remove:

- the boot storage compartments,

- the trims (see 71A, Body internal trim ).

Tightening torquesm

seat bolts 21 Nm

seat support bolts 21Nm

stalk bolts 21Nm

centre stalk bolts 44 Nm

107114

107326

1

2

Note:

If a seat is locked, unlock it using a locally madehook to manipulate the linkage (1) under the seat,or the opening control support (2) .

107117

Page 65: Renault Scenic Trim and Upholstery

76A-8

REAR SEAT FRAMES AND RUNNERSSecond row complete rear seat: Removal - Refitting

LONG CHASSIS

76A

Remove:

- the bolt (3) ,

- the seat belt stalks.

Remove:

- the bolts (4) ,

- the seat belt stalk support.

Lift up the seat without locking it.

Remove the bolts (5) .

Take the seat out of the vehicle.

Remove the wheel arch trim (see 71A, Body inter-nal trim, Wheel arch trim ).

Remove:

- the bolt (6) ,

- the side stalk.

107114

107112

3

44

107100

107101

5

6

Page 66: Renault Scenic Trim and Upholstery

76A-9

REAR SEAT FRAMES AND RUNNERSSecond row complete rear seat: Removal - Refitting

LONG CHASSIS

76A

Remove:

- the bolts (7) ,

- the support.

Partially remove the carpet.

Remove the bolts (8) .

Remove the bolt (9) .

Move the wiring harness to one side.

Remove:

- the starting aerial (10) ,

- the seat front support.

REFITTING

ADJUSTMENT PROCEDURE FOR THE REAR SEATS, SECOND ROW

Screw in and tighten, with the seats in folded posi-tion.

Hand-tighten the bolts (8) and (9) for the rear seatfront support.

Pull the front support of the seats back as far as itwill go.

Open and lock the seats.

Make sure the seats are completely locked.

Tighten the left-hand bolt (8) of the front support.

107102

107124

107124

7

8

107124

107124

9

10

Page 67: Renault Scenic Trim and Upholstery

76A-10

REAR SEAT FRAMES AND RUNNERSSecond row complete rear seat: Removal - Refitting

LONG CHASSIS

76ATighten the right-hand bolt (8) of the front support.

Tighten the central bolt (9) of the front support.

Refit the front support long bolt.

Tighten to torque:

- the seat bolts ( 21 Nm ) ,

- the seat support bolts ( 21Nm ) ,

- the stalk bolts ( 21Nm ) ,

- the centre stalk bolts ( 44 Nm ) .

Carry out a function test.

Proceed in the reverse order to removal.

Page 68: Renault Scenic Trim and Upholstery

76A-11

REAR SEAT FRAMES AND RUNNERSSecond row rear seat frame: Removal - Refitting

LONG CHASSIS

76AREMOVAL

Remove the seat trim (see 76A, Rear seat framesand runners, Second row rear seat trim).

Remove:

- the bolt (1) ,

- the hinge.

Remove the frame grille.

REFITTING

Proceed in the reverse order to removal.

107131

107132

1

Page 69: Renault Scenic Trim and Upholstery

76A-12

REAR SEAT FRAMES AND RUNNERSRear side seat mechanism: Removal - Refitting

LONG CHASSIS

76A

REMOVAL

Unclip the cover (1) .

Remove:

- the ram pin (2) ,

- the clip (3) .

Remove the return spring using pliers.

Remove the clip (4) .

Tightening torquesm

bolts 14 Nm

107348

107343

1

2

3

107347

107344

4

Page 70: Renault Scenic Trim and Upholstery

76A-13

REAR SEAT FRAMES AND RUNNERSRear side seat mechanism: Removal - Refitting

LONG CHASSIS

76A

Remove the clip (5) .

Remove the locking control bar (6) .

Remove the locking control linkage (7) .

Remove the bolts (8) .

REFITTING

Torque tighten the bolts ( 14 Nm ) .

Proceed in the reverse order to removal.

107122

107345

5

6

107323

107346

Note:

Carry out an operating check on the vehicle,before refitting the runner on the frame.

7

8

Page 71: Renault Scenic Trim and Upholstery

76A-14

REAR SEAT FRAMES AND RUNNERSRear central seat runners: Removal - Refitting

LONG CHASSIS

76A

REMOVAL

Remove the three retaining strips (1) .

Remove:

- the seat trim partially,

- the runner nuts (2) .

Remove the casing mounting bolts (3) .

Remove the casing (4) .

Remove the mounting bolts (5) .

Tightening torquesm

runner mounting bolts 25 Nm

107385

107386

11

22

22

107382

107383

107384

3

4

55

Page 72: Renault Scenic Trim and Upholstery

76A-15

REAR SEAT FRAMES AND RUNNERSRear central seat runners: Removal - Refitting

LONG CHASSIS

76AREFITTING

Remove the « runner-mechanism » assembly fromthe frame.

Torque tighten the runner mounting bolts ( 25 Nm) .

Proceed in the reverse order to removal.

Note:

Carry out an operating check on the vehicle,before refitting the runner on the frame.

Page 73: Renault Scenic Trim and Upholstery

76A-16

REAR SEAT FRAMES AND RUNNERSRear seat runner: Removal - Refitting 76A

REMOVALRemove the rear seat base trim (see 78A, Rear seattrim, Seatback trim ).

Remove the "frame and runner" assembly mountingnuts.

SPECIAL FEATURE OF THE REAR CENTRAL SEAT RUNNERS

Remove:

- the seat belt stalk mounting nuts,

- the nuts.

Remove the casing (1) and (2) .

REFITTING

Torque tighten the "frame and runner" assemblymounting bolts ( 25 Nm ) .

Proceed in the reverse order to removal.

Tightening torquesm

"frame and runner"assembly mount ingbolts

25 Nm

103514

104682

103512

1

2

1

Page 74: Renault Scenic Trim and Upholstery

77A-1

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

REMOVAL

Remove:

- the whole front seat (see 75A, Front seat framesand runners, Complete front seat ), (observe thesafety instructions).

- the head rest.

Remove the casing bolt (1) .

Remove:

- the casing bolt (2) ,

- the casing.

Special tooling required

Car. 1597 Lever for removingrear grab handle clips

Car. 1558 Pliers for zip fasteners

110749

Note:

Protect the lift command handle (using maskingtape), give a light tap with a mallet (on the rearsection of the command), keeping the commandslightly lifted.

102184

102185

1

2

Page 75: Renault Scenic Trim and Upholstery

77A-2

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Remove the back adjustment tumblewheel moun-ting cover, using tool (Car. 1597) .

Remove the back adjustment tumblewheel using ascrewdriver.

Remove:

- the cover rubber bands (3) ,

- the cover flap.

Remove:

- the four parcel shelf mounting rivets (4) ,

- the parcel shelf.

102177

102178

102179

104479

3

44

Page 76: Renault Scenic Trim and Upholstery

77A-3

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Unclip the trim (5) and (6) .

Unclip the cover clips from the air bag.

Remove the seatback cover lower retaining rubberbands.

Remove the cover retaining strips (7) .

110834

102188

6

5

102189

102183

77

Page 77: Renault Scenic Trim and Upholstery

77A-4

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Partially remove (8) the felt.

Unclip the head rest (9) guides.

Remove the seatback foam.

102187

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

110832

8

110833

102191

9

Page 78: Renault Scenic Trim and Upholstery

77A-5

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Remove the backrest frame felt.

SPECIAL FEATURES OF THE PASSENGER SEAT

Unclip the blanking cover.

Remove the bolt (10) .

Unclip the handle (11) .

Remove the casing bolt (12) .

102192

104477

104478

104476

10

11

12

Page 79: Renault Scenic Trim and Upholstery

77A-6

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Unclip the trim (13) .

Remove the casing.

Remove:

- the four parcel shelf mounting rivets (14) ,

- the parcel shelf.

Unclip the trim (15) and (16) .

Undo the zip fastener.

104475

104479

13

1414

110834

104484

16

15

Page 80: Renault Scenic Trim and Upholstery

77A-7

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77A

Disconnect the heating mat (17) connector (depen-ding on equipment level).

Unclip the cover from the air bag.

Partially remove the felt (18) .

Unclip the head rest guides (19) .

Remove the cover and the seatback foam.

104485

104481

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

17

110832

110833

18

19

Page 81: Renault Scenic Trim and Upholstery

77A-8

FRONT SEAT TRIMFront seatback trim: Removal - Refitting

LONG CHASSIS

77AREFITTING

Proceed in the reverse order to removal.

SPECIAL FEATURES OF THE PASSENGER SEAT

Refit the cover zip fastener using tool (Car. 1558)(blue in colour).

WARNING

Before refitting the seatback cover, check that thevelcro strips are properly fastened to the seat-back foam.

Page 82: Renault Scenic Trim and Upholstery

77A-9

FRONT SEAT TRIMFront seat base trim: Removal - Refitting

LONG CHASSIS

77AREMOVAL

Remove the whole front seat (see 75A, Front seatframes and runners, Complete front seat ), (ob-serve the safety instructions).

Remove the casing bolt (1) .

Remove:

- the casing bolt (2) ,

- the casing

Remove:

- the cover (3) rubber bands,

- the cover flap.

110749

Note:

Protect the lift command handle (using maskingtape), give a light tap with a mallet (on the rearsection of the command), keeping the commandslightly lifted.

102184

1

102185

102179

2

3

Page 83: Renault Scenic Trim and Upholstery

77A-10

FRONT SEAT TRIMFront seat base trim: Removal - Refitting

LONG CHASSIS

77A

Remove the seatback cover lower retaining rubberbands.

Remove the seatback cover retaining strips (4) .

Remove:

- the clip (5) ,

- the cover retaining strips (6) .

Remove the cover retaining strip (7) .

102189

102183

44

102181

102180

WARNINGCarefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

5

66

66

7

Page 84: Renault Scenic Trim and Upholstery

77A-11

FRONT SEAT TRIMFront seat base trim: Removal - Refitting

LONG CHASSIS

77A

Remove:

- the seat base cover,

- the foam.

Remove the cover clips (8) .

SPECIAL FEATURES OF THE PASSENGER SEAT

Remove the casing bolt (9) .

Unclip the trim (10) .

Remove the casing.

102190

102182

888

104476

104475

9

10

Page 85: Renault Scenic Trim and Upholstery

77A-12

FRONT SEAT TRIMFront seat base trim: Removal - Refitting

LONG CHASSIS

77A

Remove:

- the seat base cover retaining rubber band,

- the retaining strips (11) .

Disconnect the heating mat connector (12) (depen-ding on equipment level).

Remove the seat base cover.

Remove the seat base foam.

REFITTING

Proceed in the reverse order to removal.

104482

11

11

12

104486

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

WARNING

Before refitting the seatback cover, check that thevelcro strips are properly fastened to the seatbase foam.

Note:

To replace the seat base cover, carefully cut outthe ISOFIX label for the driver' seat only, withoutdamaging the seat base.

Page 86: Renault Scenic Trim and Upholstery

78A-1

REAR SEAT LININGRear seatback trim: Removal - Refitting

LONG CHASSIS

78AI - REMOVAL

Remove:

- the seat from the vehicle,

- the head rest.

Remove the seatback cover trim.

Unclip the clips (1) .

Remove the seat belt guide (2) .

Tilt back the seatback.

Pull out the zip fastener ends (3) .

Remove the seatback cover as far as the head restguides.

Press onto the clips (4) to remove the head rest gui-des.

Remove the seatback cover.

110831

103518

1

2

3

103516

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

103515

4

Page 87: Renault Scenic Trim and Upholstery

78A-2

REAR SEAT LININGRear seatback trim: Removal - Refitting

LONG CHASSIS

78A

Remove the seatback foam.

II - SPECIAL FEATURES OF THE CENTRAL REAR SEAT SEATBACK TRIM

Unclip the casing using a flat-blade screwdriver.

103517

104674

104675

Note:

The casing mounting clips can be seen in thediagram above.

Page 88: Renault Scenic Trim and Upholstery

78A-3

REAR SEAT LININGRear seatback trim: Removal - Refitting

LONG CHASSIS

78A

Unclip:

- the retaining strips,

- the head rest guides.

Remove the seatback cover.

III - REFITTING

Proceed in the reverse order to removal.

104676

104677

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

WARNING

Before refitting the seatback cover, check that thevelcro strips are properly fastened to the seat-back foam pad.

Page 89: Renault Scenic Trim and Upholstery

78A-4

REAR SEAT LININGSecond row rear seat trim: Removal - Refitting

LONG CHASSIS

78AREMOVAL

Remove:

- the seat (see 76A, Rear seat frame and runners,Complete rear seat),

- the head restraint.

Remove the control belt (1) .

Remove the backrest casing with a flatheadscrewdriver, carrying out the operations indicated(2) and (3) , in order.

Remove the clips (4) .

107328

107125

1

2

3

107338

WARNING

Carefully remove the seatback cover, to avoiddamaging the mounting clips.

107331

4

Page 90: Renault Scenic Trim and Upholstery

78A-5

REAR SEAT LININGSecond row rear seat trim: Removal - Refitting

LONG CHASSIS

78A

Remove:

- the retaining strips (5) ,

- the velcro strip (6) .

Extract the head rest guides.

Partially remove the seatback « foam-cover » as-sembly.

Remove the cover retaining strips.

107332

107333

55

6

107381

WARNING

Carefully remove the head rest guides, pressingon the tabs (7) .

107329

77

Page 91: Renault Scenic Trim and Upholstery

78A-6

REAR SEAT LININGSecond row rear seat trim: Removal - Refitting

LONG CHASSIS

78A

Remove the cover retaining rubber bands.

Remove the bolts (8) .

Turn the hinges.

Remove:

- the retaining strips (9) ,

- the « foam-cover » assembly.

107330

107334

8

107335

107336

9

Page 92: Renault Scenic Trim and Upholstery

78A-7

REAR SEAT LININGSecond row rear seat trim: Removal - Refitting

LONG CHASSIS

78A

Extract the seat base foam. Take out the seatback foam from the cover.

REFITTING

Proceed in the reverse order to removal.

Thread the release belt through the cover rubberband.

107325

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

107324

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

107341

Page 93: Renault Scenic Trim and Upholstery

78A-8

REAR SEAT LININGSecond row rear seat trim: Removal - Refitting

LONG CHASSIS

78A

Thread the belt through the seatback casing, andclip the seatback casing back on.

Thread the belt through the cover rubber band (10) .

Secure the locking belt on the support.

107340

107338

WARNING

Carefully clip the seatback cover back on, toavoid damaging the mounting clips.

107342

107328

10

Page 94: Renault Scenic Trim and Upholstery

78A-9

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

REMOVAL

Remove the headrest.

Unclip the upper trim from the seat belt guide.

Unclip the seat belt guide lower trim with a screwdri-ver (1) .

Remove the seat belt stalk mounting bolt.

Special tooling required

Car. 1558 Pliers for zip fasteners

Tightening torquesm

stalk mounting bolts 25 Nm

frame-runners moun-ting nuts

25 Nm

103530

103531

103529

Page 95: Renault Scenic Trim and Upholstery

78A-10

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Remove:

- the seat back unlocking control blanking cover witha screwdriver,

- the seat belt stalk mounting bolt.

Remove the seatback unlocking control.

Remove the seat base cover retaining strips.

Cover fixed over the base casing (2) .

103527

103526

103525

Note:

There are two different models of seat basecasing and seat cover.

114092

Page 96: Renault Scenic Trim and Upholstery

78A-11

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Cover fixed beneath the base casing (3) .

The base casings are different depending on themodel.

If these four holes are present, the cover is fixedover the base casing.

If these four holes are not present, the cover is fixedbeneath the base casing.

COVER FIXED OVER THE BASE CASING

Remove the clips using unclipping pliers (5) .

114091

114095

114094

103524

Page 97: Renault Scenic Trim and Upholstery

78A-12

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Remove the rivets (6) .

COVER FIXED BENEATH THE BASE CASING

Remove the rivets (7) .

Remove the base casing at (8) .

103523

114093

114087

Page 98: Renault Scenic Trim and Upholstery

78A-13

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Remove cover retaining strips at (9) .

Remove the cover retaining rubber bands.

Remove the cover retaining strips.

114090

114088

103522

103521

Page 99: Renault Scenic Trim and Upholstery

78A-14

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Fold the seat cushion cover forward.

Remove:

- the seat cushion cover,

- the foam.

Pull out the ends of the zip fastener with a screwdri-ver.

Undo the zip fastener.

Remove the seatback cover as far as the headrestguides.

103520

103519

WARNINGCarefully remove the cover, holding the foam'sVelcro str ips in place to avoid damaging the seatbase foam.

103518

103516

WARNINGCarefully remove the cover, holding the foam'sVelcro strips in place to avoid damaging the seat-back foam.

Page 100: Renault Scenic Trim and Upholstery

78A-15

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Press on the headrest guide clips to unclip them.

Remove the « cover - guides » assembly.

Remove the foam.

Remove the « frame - runners » assembly mountingnuts.

Remove the seat base cover.

Remove the casing (10) and (11) .

REFITTING

Refit the cover zip fastener using tool (Car. 1558)(blue in colour).

Tighten to torque:

- the stalk mounting bolts ( 25 Nm ) ,

- the frame-runners mounting nuts ( 25 Nm ) .

103515

103517

103513

103512

Page 101: Renault Scenic Trim and Upholstery

78A-16

REAR SEAT LININGRear side seat trim: Removal - Refitting 78A

Proceed in the reverse order to removal.

Page 102: Renault Scenic Trim and Upholstery

78A-17

REAR SEAT LININGRear centre seat trim: Removal - Refitting 78A

REMOVAL

Unclip the casing with a screwdriver.

Remove:

- the clips (1) ,

- the retaining strips,

- the head rest guides.

104674

Note:

The casing mounting clips can be seen in thediagram below.

104675

104676

1

Page 103: Renault Scenic Trim and Upholstery

78A-18

REAR SEAT LININGRear centre seat trim: Removal - Refitting 78A

Remove:

- the seatback cover,

- the foam.

Cut off the clips (2) from the cover retaining rubberbands.

Remove the seat base cover.

Remove the seat base foam.

104677

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seat-back foam.

104679

2

104680

WARNING

Carefully remove the cover, holding the foam'svelcro strips on the in place to avoid damagingthe seat base foam.

104681

Page 104: Renault Scenic Trim and Upholstery

78A-19

REAR SEAT LININGRear centre seat trim: Removal - Refitting 78A

Remove:

- the seat belt stalk mounting nuts,

- the nuts.

REFITTING

Proceed in the reverse order to removal.

104682

Page 105: Renault Scenic Trim and Upholstery

78A-20

REAR SEAT LININGRear seat base trim: Removal - Refitting

LONG CHASSIS

78AI - REMOVAL

1 - Side rear seat

Remove:

- the stalk (1) bolt,

- the stalk.

Remove:

- the stalk (2) bolt,

- the stalk.

Unclip:

- the blanking cover (3) ,

- the seatback unlocking control.

Remove the clips (4) using the unclipping pliers.

103529

1

103527

103524

2

3

44

Page 106: Renault Scenic Trim and Upholstery

78A-21

REAR SEAT LININGRear seat base trim: Removal - Refitting

LONG CHASSIS

78A

Drill out rivets (5) .

Slightly lift the plastic casing.

Remove the cover retaining (6) elastic straps.

Remove the inside cover retaining strips.

Remove the side cover retaining strips.

103523

110835

5

6

103525

103521

Page 107: Renault Scenic Trim and Upholstery

78A-22

REAR SEAT LININGRear seat base trim: Removal - Refitting

LONG CHASSIS

78A

Fold the seat base cover forward.

Remove:

- the seat base cover,

- the foam.

2 - Central rear seat

Cut off the clips (7) from the cover retaining rubberbands.

Remove the seat base cover.

103520

103519

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

104679

104680

WARNING

Carefully remove the cover, holding the foam'svelcro strips in place to avoid damaging the seatbase foam.

7

Page 108: Renault Scenic Trim and Upholstery

78A-23

REAR SEAT LININGRear seat base trim: Removal - Refitting

LONG CHASSIS

78AII - REFITTING

Proceed in the reverse order to removal.

WARNING

Before refitting the seatback cover, check that thevelcro strips are properly fastened to the seat-back foam pad.