renault - parker truck hydraulics · pdf filerenault january 2012 failure or improper...
TRANSCRIPT
RENAULTRENAULT
Ren
ault
January 2012
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
WARNING — User Responsibility
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale”.
Offer of Sale
© Copyright 2012, Parker Hannifin Corporation, All Rights Reserved
4.19.II Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA
Renault
Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA
January 2012
Transmission P.T.O. Driver & Aperatures (Viewed from Rear of Transmission)
L-Left Side R-Right Side B-Bottom Side T-Top Side
For transmission not listed, contact your authorized Chelsea Distributor.
IMPORTANT: See Safety Information in Section 1 of the Chelsea Applications catalog HY25-3000/US.
4.19.1
RENAULT TRANSMISSION INDEX
Transmission Make and Model
P.T.O.
Appl.
Number
Number
Forward
Speeds
Teeth in
P.T.O.
Driver
BDSL-132R RNT-1 10 R33
BDSL-181 (MACK-T1060) RNT-1 6 R33
BDSL-2052R RNT-1 10 R33
BDSL-2142 RNT-2 5 R53
BDSL-2142R (MACK-T1100) RNT-2 10 R53
G409-0 (MACK-T1090) RNT-6 9 R53
Ren
ault
Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA
January 2012
4.19.2
Engine %
Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
RNT-1
Inter.Torq.
Dir.Rot. Filler Block
AdapterAssy. Stud Kit
P.T.O. ModelRIGHT Side
P.T.O. Model
PITCH LINE TO APERTURE FACE:
TRANSMISSION GEAR DATA:
RIGHT SIDE ONLY
RevHi
33 Teeth - R.H. HELIX
Stud KitAdapter
Assy.Filler BlockRevHi
Engine %Dir.Rot.
Inter.Torq.
1.1980" (30.4300MM)
R.H. 06-Bolt Opening Gear FORWARD of Centerline
BDSL-2052R
BDSL-181
BDSL-132R
T1060
RENAULT
ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-125 Opp442LLDHX-*3 (1) 250 63 7170-60X7-A-125 442LQDHX-*3 (1) Opp225 68 7170-60X7-A-125 442LRDHX-*3 (1) Opp225 79 7170-60X7-A-125 442LSDHX-*3 (1) Opp200 94 7170-60X7-A-125 442LUDHX-*3 (1) Opp195 112 7170-60X7-A-125 442LWDHX-*3 (1) Opp175 131 7170-60X7-A-125 442LXDHX-*3 (1) Opp140 156 7170-60X
ONE SPEED - FORWARD & REVERSE7-A-125 Opp352LSDHX-*3 (1) 140 95 123 7170-60X
ONE SPEED - DUAL SHAFT7-A-125 Opp452LSDHX-*3 (1) 140 95 7170-60X
NOTE: No adapters available for this application.
(1) Input Gear Part No. 5-P-1041
Engine %
Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Inter.Torq.
Dir.Rot. Filler Block
AdapterAssy. Stud Kit
P.T.O. ModelRIGHT Side
P.T.O. Model
PITCH LINE TO APERTURE FACE:
TRANSMISSION GEAR DATA:
RIGHT SIDE ONLY
RevHi
53 Teeth - R.H. HELIX
Stud KitAdapter
Assy.Filler BlockRevHi
Engine %Dir.Rot.
Inter.Torq.
.4360" (11.0700MM)
R.H. 06-Bolt Opening Gear FORWARD of Centerline
BDSL-2142R
BDSL-2142
T1100
RNT-2RENAULT
ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-550 Eng100XRDJX-*3 (1) 125 126 7170-62X
ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-125 Opp442KFDJX-*3 (2) 250 72 7170-61X7-A-500 7-A-125 442KLDJX-*3 (3) Opp250 93 7170-61X7-A-500
7-A-125 442KQDJX-*3 (3) Opp225 100 7170-61X7-A-500
7-A-125 442KRDJX-*3 (3) Opp225 116 7170-61X7-A-500
7-A-125 442KSDJX-*3 (3) Opp200 138 7170-61X7-A-500
7-A-125 442KUDJX-*3 (3) Opp195 164 7170-61X7-A-500
7-A-125 442KWDJX-*3 (3) Opp175 193 7170-61X7-A-500
7-A-125 442KXDJX-*3 (3) Opp140 228 7170-61X7-A-500
NOTE: No adapters available for this application.
(1) Gear and Shaft Kit No. KXA-2-P-609(2) Input Gear Part No. 5-P-1086(3) Input Gear Part No. 5-P-1042
Renault
Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA
January 2012
4.19.3
Engine %
Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
RNT-1
Inter.Torq.
Dir.Rot. Filler Block
AdapterAssy. Stud Kit
P.T.O. ModelRIGHT Side
P.T.O. Model
PITCH LINE TO APERTURE FACE:
TRANSMISSION GEAR DATA:
RIGHT SIDE ONLY
RevHi
33 Teeth - R.H. HELIX
Stud KitAdapter
Assy.Filler BlockRevHi
Engine %Dir.Rot.
Inter.Torq.
1.1980" (30.4300MM)
R.H. 06-Bolt Opening Gear FORWARD of Centerline
BDSL-2052R
BDSL-181
BDSL-132R
T1060
RENAULT
ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-125 Opp442LLDHX-*3 (1) 250 63 7170-60X7-A-125 442LQDHX-*3 (1) Opp225 68 7170-60X7-A-125 442LRDHX-*3 (1) Opp225 79 7170-60X7-A-125 442LSDHX-*3 (1) Opp200 94 7170-60X7-A-125 442LUDHX-*3 (1) Opp195 112 7170-60X7-A-125 442LWDHX-*3 (1) Opp175 131 7170-60X7-A-125 442LXDHX-*3 (1) Opp140 156 7170-60X
ONE SPEED - FORWARD & REVERSE7-A-125 Opp352LSDHX-*3 (1) 140 95 123 7170-60X
ONE SPEED - DUAL SHAFT7-A-125 Opp452LSDHX-*3 (1) 140 95 7170-60X
NOTE: No adapters available for this application.
(1) Input Gear Part No. 5-P-1041
Engine %
Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Inter.Torq.
Dir.Rot. Filler Block
AdapterAssy. Stud Kit
P.T.O. ModelRIGHT Side
P.T.O. Model
PITCH LINE TO APERTURE FACE:
TRANSMISSION GEAR DATA:
RIGHT SIDE ONLY
RevHi
53 Teeth - R.H. HELIX
Stud KitAdapter
Assy.Filler BlockRevHi
Engine %Dir.Rot.
Inter.Torq.
.4360" (11.0700MM)
R.H. 06-Bolt Opening Gear FORWARD of Centerline
BDSL-2142R
BDSL-2142
T1100
RNT-2RENAULT
ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-550 Eng100XRDJX-*3 (1) 125 126 7170-62X
ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-125 Opp442KFDJX-*3 (2) 250 72 7170-61X7-A-500 7-A-125 442KLDJX-*3 (3) Opp250 93 7170-61X7-A-500
7-A-125 442KQDJX-*3 (3) Opp225 100 7170-61X7-A-500
7-A-125 442KRDJX-*3 (3) Opp225 116 7170-61X7-A-500
7-A-125 442KSDJX-*3 (3) Opp200 138 7170-61X7-A-500
7-A-125 442KUDJX-*3 (3) Opp195 164 7170-61X7-A-500
7-A-125 442KWDJX-*3 (3) Opp175 193 7170-61X7-A-500
7-A-125 442KXDJX-*3 (3) Opp140 228 7170-61X7-A-500
NOTE: No adapters available for this application.
(1) Gear and Shaft Kit No. KXA-2-P-609(2) Input Gear Part No. 5-P-1086(3) Input Gear Part No. 5-P-1042
Ren
ault
Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA
January 2012
4.19.4
Engine %
Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
RNT-6
Inter.Torq.
Dir.Rot. Filler Block
AdapterAssy. Stud Kit
P.T.O. ModelRIGHT Side
P.T.O. Model
PITCH LINE TO APERTURE FACE:
TRANSMISSION GEAR DATA:
RIGHT SIDE ONLY
RevHi
53 Teeth - R.H. HELIX
Stud KitAdapter
Assy.Filler BlockRevHi
Engine %Dir.Rot.
Inter.Torq.
.4500" (11.4300MM)
R.H. 06-Bolt Opening Gear FORWARD of Centerline
G409-0
T1090
RENAULT
ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-550 Eng100XRDJX-*3 (1) 125 137 7170-62X
ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-125 Opp442KFDJX-*3 (2) 250 78 7170-61X7-A-500 7-A-125 442KLDJX-*3 (3) Opp250 101 7170-61X7-A-500 7-A-125 442KQDJX-*3 (3) Opp225 109 7170-61X7-A-500 7-A-125 442KRDJX-*3 (3) Opp225 126 7170-61X7-A-500 7-A-125 442KSDJX-*3 (3) Opp200 150 7170-61X7-A-500 7-A-125 442KUDJX-*3 (3) Opp195 178 7170-61X7-A-500 7-A-125 442KWDJX-*3 (3) Opp175 210 7170-61X7-A-500 7-A-125 442KXDJX-*3 (3) Opp140 248 7170-61X7-A-500
ONE SPEED - FORWARD & REVERSE7-A-800 Opp340SFDJX-*3 (4) 200 71 75 7170-61X
NOTE: No adapters available for this application.
(1) Gear and Shaft Kit No. KXA-2-P-609(2) Input Gear Part No. 5-P-1086(3) Input Gear Part No. 5-P-1042(4) Input Gear Part No. 5-P-921