remote patient healthcare monitoring over internet
TRANSCRIPT
MENTORDR. DIPANKAR SARKAR
PRESENTED BY…
•Sabuj Saha(EC/12/30)
•Astik Charan Mishra (EC/12/11)
•Sourav Santra(EC/12/43)
•Anindya Das (EC/12/04)
•Adhidev Chaudhury(EC/12/01)
GUIDED BY :- ANINDITA BANERJEE & MD. NURUL HASSAN
INTRODUCTION
Repeated or continuous observations or
measurements of the Patient , his or her
physiological function from remote location.
Objective of Remote Patient Monitoring
Continuous monitoring of health status of patients.
Extend independent living for the elderly persons.
Reduce demand of caregivers.
BUILDING BLOCKS
• 5V Regulated Power Supply
Temperature Sensor
Heart Rate Sensor
Blood Oxygen Saturation Level Sensor etc.
• PIC Microcontroller
• Sensors
• Wi-Fi Module
• PC Interface
BUILDING BLOCKS CONT.
• 5V Regulated Power Supply
1. 230 -9V step down transformer
2. Bridge rectifier3. Capacitor DC filter
4. 5V regulator IC
BUILDING BLOCKS CONT.
• SENSORS
1.Temperature Sensor
Calibrated directly in Celsius
Accuracy:10mV/deg. COperating voltage : 4-20VTemp. range: -55deg. C to
150 deg. C
BUILDING BLOCK CONT.
2.Blood Oxygen Saturation Level & Heartbeat Sensor
The finger probe has a photo detector and two LED’s to transmit light
across the fingertip: one Red (660 nm) and one IR
(895 nm).
BUILDING BLOCKS CONT.
3. PIC18F4550 MicrocontrollerWide range of operating
voltage (2V – 5.5V)13ch 10 bit ADC
32kb flash memory, 2kb SRAM, EEPROM is 256 bytes
35 I/O pinsOne 8 bit & three 16 bit
timersOperating Frequency 48
MHz
Wi-Fi module
Operating voltage is 3.3V.
Low cost Wi-Fi module. Interfaced with microcontroller via UART serial connection.
MICROCONTROLLER
TEMPERATURE SENSOR
HEARTBEAT SENSOR
BLOOD OXYGEN LEVEL SENSOR
5V REGULATED POWER SUPPLY
LOCAL LCD DISPLAY
WIFI MODULE
PC INTERFACE (upload to remote server)
REMOTE DISPLAY DEVICES WITH INTERNET
Cloud server
BLOCK DIAGRAM
START
Get Sensor info
Check monitoring
system ready or
not?
YES
Get remote monitoring system connection status
OK or NOT?
NO
NOSHOW
SYSTEM ERROR
Send patient information to remote server
YES
log it to file
NO
do process in infinite loop
STOP
FLOWCHART
Check if the patient health parameters is
within standard range
YES
Send immediate notification locally and take action accordingly
ADVANTAGES
•Bridging the gap between the doctor and the patients.
•Best to be used in rural areas.
•Easy to operate
Future scope
Clinical care can be provided with such a
system that computerized decision-support is
feasible and can aid in providing more cost-
effective and improved patient care.