release
If you can't read please download the document
DESCRIPTION
releaseTRANSCRIPT
Broadcom (R) Corporation Windows Driver and Apps for BCM5752/BCM5755 TPM RELEASE 4.1.3(05/22/2008)RELEASE NOTESThese notes describe release 4.1.3 software for the Broadcom BCM5752/BCM5755 and BCM 5880 TPM.See the "Release Version Information Table" below.Software Compatibility======================This release of software supports:- BCM5752 NIC/TPM with A1/A2 silicon versions- BCM5755 NIC/TPM with A0/A1 silicon versions- BCM5880 USH with A0/B0/C0 siliconUpgrading from the Previous Driver Release==========================================It is highly recommended that you upgrade any previous installationsof the Broadcom TPM driver and apps software.Contents of the Release=======================*** Release Version Information Table *** Product Version Previous Rel. 1. Broadcom TPM Windows Driver(32 bit) 3.0.0.13.0.0.12. Broadcom TPM Windows Driver(64 bit) 3.0.0.13.0.0.13. Broadcom TPM Windows Diagnostics 3.0.0.03.0.0.04. Broadcom TPM Windows TPM Library 3.0.0.03.0.0.05. OpenSSL Library - -6. Credential Vault(CV) Host Components 0.24G0.24E7. Credetial Vault (CV) 64 bit Host Components 0.24G0.24E8. Credentail Valut (CV) USB Driver 6.0.6000.16386(6.0.6000.1301)(6.0.6000.1204)9. Firmware Upgrade Tool 3.0.0.03.0.0.010. Bio API Test Application 1.0.E1.0.D11. Bio API BSP 1.1.41.1.312. USH windows diagnostics tool 1.0.0.291.0.0.2714. Dell Control Point 1.0.0.81.0.0.716. BSP Test Application 1.0.11.0.02. Driver and app information=============================tpmlib.dll vs tpm.dll:====================================================Note that the library tpmlib.dll is only for use with the Broadcom TPM Windows Diagnostics (tpmdiag).The library tpm.dll should be used for other tpm-based applications.btpmw32_nontpmbios.sys:====================================================The default driver, btpmw32.sys(for 32 bit platforms) and btpmwx64.sys(for x64 bit platforms), is intended for use in systems where a TPM-enabled BIOS is present and also may be used without a TPM-enabled BIOS if the system has a Lakeportor greater chipset (ie, supports TPM 1.2 memory-mapped i/o). For 'legacy' 32 bit systems (ie, which only support port based i/o) and no TPM-enabled BIOS, the driver 'btpmw32_nontpmbios.sys' can be renamed to thedefault name (btpmw32.sys) and be used. This is because the default WHQL-certifiable driver is not able to set up the LPC decode registers necessary for port based i/o.Installing the broadcom tpm driver under windows xp:====================================================1. Copy windows\driver and windows\applications contents into the desired directory on the target system.2. Launch the add hardware wizard from the control panel.3. Choose hardware is already connected when this page is displayed by the wizard and click next.4. Choose manual install instead of automatic detection when this page is displayed by the wizard and click next.5. Choose add new hardware device from the list displayed and click next.6. Choose system devices from the list and click next7. Choose have disk in the next dialog page.8. Browse to the directory where the driver files were copied and select this directory.9. Select "broadcom tpm device" from the list and click next.From now follow the screens of the wizard to complete the driver installation.Replacing existing driver under windows xp:====================================================1. Under Device Mgr...System Devices...Broadcom TPM, select Update Driver2. Select Install From Specific Location...Don't Search...Have Disk and point to directory containing driver3. From now follow the screens of the wizard to complete the driver installation.Testing using tpmdiag=====================Launch the tpmdiag application. Select the 'Help' button for a description of tpmdiagand the available tests.CV Host Software=================The CV host software includes the following:1. CV USB host driver - Host CV driver to talk to USH2. CV driver test application - Tests the CV USB host driver.3. CV Test application that uses the CV API user library and DLL - To test CV API.4. CV host storage and control services - Services that provide host operations to USH5. CV Administrator tool - Provides CV administration tasks.6. CV Object browser - Provides browsing capability for objects stored in CV/USH.Bio API Test application========================Test application for testing the Bio API implementation using CV API. Please refer to therelease notes in this directory for details.Bio API BSP===========Broadcom BSP that implements the Bio API.Firmware Upgrade Tool======================This release does not include an installer for the firmware upgrade tool.It will be included in the next release. To run this tool, the platform should install.NET 2.0 redistributable available from Microsoft web site.Security Manager Components:============================These components get installed under the DCP directory.Known Problems:===============NoneHistory========version datedescription==========================================================================================================First release with support for BCM 5880 TPM 07/30/2007 Initial release with BCM 5880 TPM support.Release 3.0.1 to include CV host software 10/01/2007CV host software addedInclude missing 64 bittpm driver.Release 3.0.2 to include CV host software 10/16/2007CV Host software version 0.8Release 3.0.3 to include CV host software 11/02/2007CV host software version 0.10 bulit by BRCMRelease 3.0.4 to fix 64 bit TPM driverinstall problem on 64 Bit XP Platform 11/05/2007TPM driver version 3.0.0.1 to fix64 bit driver install problem.Release 3.0.5 to add latest CV and Bio API 11/30/2007CV Host software version 0.14, Bio API, and USH windowsdiagnostics.Release 3.0.6 to upgrade to latest 12/14/2007ushdiag Version 1.0.0.3:CV host components (v 16) with callback Added Fingerprint test to cvDiag command.support and version 1.0.0.3 ushdiag. Added check boxes for cv_status.Add new version of batest CV test parameters now maintained per testand brcmbsp Added CV test repeat count.Release 3.0.7 to upgrade to latest 12/19/2007ushdiag Version 1.0.0.4: Print message to "load ush image" when no image present. Print message to "leave power on for 40 when power up" after update flash. Removed \n from console messages. Removed fingerprint test parameters. Fixed cvDiagInd input buffer len. Include changes from release .16b of CV host components (hmac and pba changes). Include new release of brcmbsp and test application. Relase 3.0.8 to include 64 bit CV host 12/21/2007Include 64 bit CV host components. For internalcomponentsPQA testing only.Release 3.0.9 to include changes to 01/03/2008Include 0.17 CV host components that includes handles used in CV user library for 32/64 bithandle changes.brcmbsp changes and batest platformsapplication changes.Release 3.0.A to include bio api componentslinked with V0.17 cv host components 01/08/2008Include 0.17 patch and compile bio api components with this patch.Release 3.0.B 01/11/2008ushdiag Version 1.0.0.7: Only display RFID parameters when select RFID test. Added Firmware Upgrade command. Modified build to fix failure after 50 tests. Set cursor to busy and added "Please wait..." message for FLASH_UPDATE, LOAD_SBI and FIRMWARE_UPGRADE. latest cv host component v0.18. ba test application 1.0.5 to vhange FAR value.Release 3.0.C 01/23/2008ushdiag Version 1.0.0.10: refer to ush\ushdiag\release.txt for updates. bioapi-test app version 1.0.6 brcmbsp 1.0.4 to link v0.18a cvusrlib.libRelase 3.0.D 01/25/2008Include changes to the CV USB driver from 0.18a that was missed, add new DCP.Release 3.0.E 02/01/2008CV related host component changes:1. Support for additional FP call back messages2. Secure session bug fixes3. Pin Prompt changes4. Fix for callback path cv handle5. Creation of host storage objects failure if path is too long fix.Also include enhancements for brcmbsp, batest and ushdiag. Please refer its release notes for details.Release 3.0.F 02/05/2008Include latest DCP components.Release 4.0.0 02/07/2008Include Broadcom BSP with patched port.lib, BRCM built bio api framework components, latest DCP, latest CV host components,latest batest (and associated brcmbsp).Release 4.0.1 02/15/2008ushdiag Version 1.0.0.15 (see USHCD\windowsxp\ush\ushdiag\release.txt).latest CV host components (v 0.21), broadcom BSP, and DCP.Release 4.0.2 02/26/2008Update to latest CV Host components v0.22, relink brcmbcp fix cv usb driver pnp (inf file change)Release 4.0.3 03/9/2008Update to latest CV Host components v0.23, relink brcmbcp fix cv usb driver pnp (inf file change), bug fixes in bsp,logging in bsp, bug fixes and feature additions in ushdiag,dosdiag.Release 4.0.4 03/15/2008Update to latest CV Host components v0.23, bug fixes and feature additions in ushdiag,dosdiag, windows TPM firmware upgrade tool.Release 4.0.5 03/24/2008Update to latest CV Host components v0.23, add latest BSP 84 bit and BSP Test application for32 and 64 bit platformsRelease 4.0.6 03/26/2008Update BSP with the free crash.Release 4.0.7 03/28/2008Update host components with 24B ofcv host components. Inlcude 24B CV hostcomponents that includes coveritychanges, host service changes. Update CV USB driver. Release 4.0.8 04/04/2008Update host components with 24C ofcv host components. Inlcude 24C CV hostcomponents that includes coveritychanges, host service changes.Update CV USB driver.Release 4.0.9 04/06/2008New DCP components to fix help files. Release 4.0.A 04/15/2008Host components (control service) fix for hibernate issue. Release 4.0.B 04/21/2008Update host components to fix hang issueRelease 4.0.C 04/23/2008Fix host control uninstall issue, WHQL driverand DCP fixes.Release 4.0.D 04/29/2008Fix CV USB driver to not send host control handshake messagenext reevision of ushdiag, brcmbsp to createvolatile object for capture.Release 4.0.E 05/04/2008CV USB driver changes for s3 issues. BSP change to usefeature set data when available.Release 4.0.F 05/07/2008Latest host components, BSP and batest.Release 4.1.0 05/09/2008Fix for non-ush cvusrlib crash. BSP relinkedRelease 4.1.1 05/13/2008S3 related issues in CVUSB Driver and host services.Release 4.1.2 05/15/2008CV USB driver changes for handling timeouts rightRelease 4.1.3 05/22/2008Latest USH diag (to fix crash).