To search for an item, click on the Find button on the lower toolbar(binoculars). Type in the document number, keyword or author and click on Find. This will find the first occurance. Click on the Find Next button (binoculars with arrow) to continue searching the document.

212-144-68, Temperature Distribution In The Work-Piece By Welding, Westby, O.212-163-69, Metal Transfer In Variable Frequency Gas Shielded Pulsed Current Arc Welding, Jackson, C.E.212-188-70, Molten Pool Phenomena In Submerged Arc Welding, Mori, N. and Horii, Y.212-308-74, Influence Of Process And External Parameters On The Arc Voltage Fluctuations In Submerged Arc Welding, Erdmann-Jesnitzer, F., Rehfeldt, D. and Gupta, P.C.212-338-75, Quality Control In Arc Stud Welding, Baeslack, W.A., Fayer, G., Ream, S. and Jackson, C.E.212-339-75, Weld Thermal Efficiency Of The GTAW Process, Niles, R.W. and Jackson, C.E.212-340-75, Transient Thermal Phenomena And Weld Geometry In GTAW, Malmuth, N.D., Hall, W.F., Davis, B.I. and Rosen, C.D.212-347-75, Influence Of Current Pulses During Submerged Arc Welding, Gupta. P.C., Rehfeldt, D. and Erdmann-Jesnitzer, F.212-348-75, Influence Of Superimposition Of Longitudinal Magnetic Field On Welding Parameters And Arc Stability During Submerged Arc Welding, Gupta, P.C., Rehfeldt, D. and Erdmann-Jesnitzer, F.212-349-75, Influence Of The Superimposition Of Longitudinal Magnetic Field On The Weld Shape During Submerged Arc Welding, Gupta, P.C., Rehfeldt, D. and Erdmann-Jesnitzer, F.212-352-75, 352-75, Contribution To The Study On The Influence Of Welding Arc On The Measurement Of Weld Metal Pool Surface Temperature Using Radiational Pyrometer212-357-76, The Effects Of Impurity Elements On The Arc And Weld Pool Stability In TIG Welding, Metcalfe, J.C. and Quigley, M.B.C.212-358-76, Effects Of Shielding-Gases On The Wire Melting Rate In GMAW, Yamauchi, N. and Jackson, C.E.212-360-76, Cinetic Of Bonded Face Near Fine-Grain Structure After Friction-Welding Of Low Carbon Steels And Other Materials And Iron, Erdmann-Jesnitzer, F. and Hannover, O.212-361-76, Other Modes Of Instability In A Cylindrical Conductor, Anon.212-363-76, About The Arc Control In Manual Arc Welding As The Result Of Biocybernetic Investigations, Kralj, V.212-364-76, The Attempts Of Material Transfer Control In Manual Arc And CO2 Welding By Means Of Dynamically Controlled Rectifiers, Kralj, V., Ozaki, N. and Stular, P.212-365-76, Deoxidation Processes By Welding With Cored Wires, Kejzar, R.212-367-76, Study Group 212 Of The International Institute Of Welding, Anon.212-368-76, Solidification Of Molten Pool And Bead Formation, Ishizaki, K.212-369-76, Study On CO2 Soft Plasma Arc Welding Process, Yamamoto, T., Shimada, W., Hiramoto, S., Ohmachi, N. and Ukai, J., Trefilova, B., Vrbensky, J. and Vyjidak, O.212-370-76, Development Of Underwater Welding With Local Cavity Formation Method, Nishiguchi, K., Matsunawa, A., Tamura, M., Nishio, Y. and Wada, H.212-371-76, Gas Metal Arc Welding In High Pressure Atmospheres -Arc Characteristics And Bead Formation Mechanism-, Nishiguchi, K. and Matsunawa, A.212-384-76, Effects Of Pressure On Weld Metal Chemistry, Anon.212-389-77, The Magnetohydrodynamics Of Welding. Part1: Instabilities, Anon.212-390-77, Proposal For The Classification Of Penetration Mechanisms And Definition Of

Page 1

Related Terms, Ishizaki, K.212-391-77, Study On Bead Surface Profile, Nishiguchi, K., Ohji, T. and Matsui, H.212-392-77, Mechanism Of Bead Ripple Formation, Ishizaki, K.212-393-77, Characteristics Of Plasma Arc Welding With Arc Wire Addition, Taguchi, H., Haneda, M. and Imanaga, S.212-395-77, Effects Of Pressure On Weld Metal Chemistry, Christensen, N. and Gjermundsen, K.212-396-77, A Modified Low Pressure Probe Theory Applied To The Measurement Of Temperature Profiles In Plasma-Welding Arcs, Allum, C.J., Metcalfe, J.C. and Quigley, M.B.C.212-397-77, An Initial Assessment Of An Efflux Plasma Control System For Plasma Arc Welding, Metcalfe, J.C., Quigley, M.B.C and Sims, D.G.212-400-77, On The Pressure Distribution In A Welding Arc. Report 25.03.1977, Halmoy, E.212-427-78, Metal Surface Temperature In Arc Melting, Erokhin, A.A.212-436-78, Application Of Laser For Material Processing --Heat Flow In Laser Hardening--, Arata, Y., Maruo, H. and Miyamoto, I.212-437-78, Bead Formation In TIG Welding, Yamauchi, N. and Taka, T.212-448-78, Theory Of Optimal Control In Heat Processes Of Materials Processing By Concentrated Energy Sources, Rykalin, N.N., Uglov, A.A. and Melukov, V.V.212-450-79, Removal Of Non-Metallic Inclusions At Melting In A Neutral Atmosphere, Erokhin,A.A. and Dobrovolsky, I.P.212-451-79, Investigation On Welding Arc Sound (Report 1) -Effect Of Welding Method And Welding Condition On Welding Arc Sound-, Arata, Y., Maruo, H., Inoue, K., Futamata, M. and Toh, T.212-452-79, TIG Arc Welding With Hollow Tungsten Electrode, Yamauchi, N. and Taka, T.212-460-79, Physics Of Welding. Chapter 1 - Symbols, Units And Dimensions, Anon.212-461-79, Chapter 7 - Metal Transfer And Mass Flow In The Weld Pool, Anon.212-462-79, Evaluation Of Mass Flow Fields And Electric Current Density Fields In A Free Burning TIG Similar Arc, Landes, K., Seeger, G. and Tiller, W.212-463-79, The Weld Alloying Transfer Of Alloyed Elements From The Electrode To The Weld At The Manual Arc Welding, Kejzar, R. and Kosec, L.212-479-80, Statistical Analysis Of Arcing Voltage In The CO2-Shielded Welding Process, Weinschenk, H.E. and Schellhase, M.212-480-80, Study On Characteristics Of Reverse Polarity Soft Plasma Arc And Its ApplicationTo Overlay Welding, Shimada, W., Hoshinouchi, S., Hiramoto, S. and Ukai, J.212-485-80, Metal Superheating In Arc Melting, Erokhin, A.A. and Pirch, I.I.212-495-80, Gas Flow In The Column Of A TIG Welding Arc, Allum, C.J.212-497-81, Investigations Into Arc Welding Process Monitoring By Statistical Signal Analysis, Schellhase, M.212-509-81, Some Influences Of The Inner Circulation Of The Pendant Droplet On Its Detaching In The MIG/MAG Welding, Hiltunen, V.212-514-81, About The Arc Control In Manual Arc Welding As The Result Of Biocybernetic Investigations. Supplement To Document IIW/IIS 212-363-76, Kralj, V.212-522-82, Underwater Welding With TIG, Allum, C.J.212-527-82, Narrow Gap MIG Welding Process With High Speed Rotating Arc, Nomura, H. and Sugitani, Y.212-529-82, Formation Mechanism Of Lack Of Fusion In MAG Welding, Yamauchi, N., Inaba, Y. and Taka, T.

Page 2

212-534-82, Two-Dimensional Calculations OF Welding Arcs In Argon, Kovitya, P. and Lowke,J.J.212-536-82, The High Pressure Arc, Allum, C.J.212-538-82, About First Investigations On Fundamentals Of Kinematics Of Covered Electrode In Manual Arc Welding, Kralj, V.212-549-83, Process Parameter Influence On Arc Temperature Distribution, Key, J.F., Chan, J.W. and McIlwain, M.E.212-551-83, Some Investigation Of Acoustic Emission At MIAB Welding, Schlebeck, E.212-555-83, A Transistorized Analogue Power Source, Boege, W. and Rehfeldt, D.212-556-83, A Review Of Controlling And Monitoring Of Arc Welding Processes, Rehfeldt, D. and Wandtke, R.212-557-83, Application Of Process Simulation For Arc Welding Processes, Rehfeldt, D. and Seyferth, J.212-558-83, Rotating Welding Arcs, Halmoy, E. and Fostervoll, H.212-560-83, Mathematical Modelling Of A Molten Pool In Arc Welding Of Thin Plate, Ohji, T. and Nishiguchi, K.212-561-83, Factors Controlling MIG Weld Metal Chemistry, Grong, O. and Christensen, N.212-562-83, Process analysis For Metal-Arc Welding - Assessing The Static And Dynamic Behaviour Of Welding Generator Sets For Manual Arc Welding, Dorn, L. and Rippl, P.212-563-83, Surface Tension Driven Flow In Semicylindrical Basin, Yokoya, S. and Matsunawa, A.212-566-82, The Transistorized Welding Inverter And Its Power Losses, Huang, S.-S.212-570-83, Force Effect Of Welding Arc, Lebedev, V.K. and Pentegov, I.V.212-574-83, Pulsed GMAW Of Mild Steel: Interactions Between Process Parameters, Quintino, L. and Allum, C.J.212-577-84, Calculated Properties Of Free Burning Arcs In Argon In The Pressure Range 1 to 100 Atm, Kovitya, P.212-578-84, Criteria For Judment Of The Dynamic Properties Of Modern MIG/MAG d.c. Welding Power Sources, Brand, H.-G. and Krause, E.212-582-84, Control Of Fusion Characteristics In Pulsed Current GMAW. Part 1 - Fusion Characteristics, Allum, C.J. and Quintino, L.212-583-84, Mathematical Model Of Gas Admixtures Interaction With Refractory Metals During Non-Consumable Electrode Welding In Controlled Atmosphere, Nerodenko, M.M., Statkevich, I.I., Kozina, L.N. and Revyakin, A.V.212-585-84, Study On Pulsed MIG Welding, Maruo, H. and Hirata, Y.212-586-84, Pulsed CO2 Arc Welding, Matsuda, F., Ushio, M., Itonaga, K. and Yokoo, T.212-588-84, Metal Transfer In Arc Welding As A Varicose Instability Part I. Varicose Instabilities In A Current Carrying Liquid Cylinder With Surface Charge, Allum, C.J.212-589-84, Metal Transfer In Arc Welding As A Varicose Instability. Part II - Development Of Model For Arc Welding, Allum, A.J.212-590-84, The Development Of Weld Line Tracking Sensor, Sakai, E., Fujimura, H. and Ide,E.212-597-84, Study Group 212 Physics Of Welding Annual Report 1983-84, Lancaster, J.F.212-603-85, A Double Ellipsoid Finite Element Model For Welding Heat Sources, Goldak, J., Chakravarti, A. and Bibby, B.212-604-85, The Significance Of The Point Source Model Assumptions On Weld Cooling Times, Moore, J.E., Bibby, M.J. and Goldak, J.A.

Page 3

212-605-85, Study Group 212 Physics Of Welding Intermediate Meeting 1985, Ljubljana, Yugoslavia. AGENDA, Lancaster, J.F.212-606-85, Automatic Real - Time Bead Height Control With Arc Sensor In TIG Welding, Nomura, H., Sugitani, Y. and Suzuki, Y.212-607-85, Back Bead Width Control In One Side SAW Using Flux Copper Backing -Correlation Between Back Bead Width And The Voltage Which Measured Between Base Plate And Copper Backing (Report 1), Nomura, H., Sato, Y. and Satoh, Y.212-609-85, Dynamic Characteristics Of TIG Welding Arc With AC Square Wave, Qilong, W., Jiuhai, Z., Yangping, L. and Zhemin, C.212-610-85, Study On Arc Sound In TIG And Plasma Process, Jiuhai, Z., Qilong, W., Hongjian, C. and Shuyan, Y.212-616-85, Study Group 212 Physics Of Welding Intermediate Meeting 1985, Ljubljana, Yugoslavia. Minutes Of The Meetings Held On 3rd And 4th April 1985 At The Institute Of Welding, Ljubljana, Lancaster, JF.212-617-85, Beam-Plume Interaction In Pulsed YAG Laser Processing, Matsunawa, A., Yoshida, H. and Katayama, S.212-618-85, Role Of Surface Tension In Fusion Welding, Matsunawa, A.212-619-85, Surface Active Elements And Arc Welding Phenomena, Ishizaki, K.212-620-85, Role Of Surface Tension And Electro-Magnetic Force In Arc Welding, Ishizaki, K.,Yokoya, S., Okada, T. and Matsunawa, A.212-621-85, Study On Pulsed TIG Welding, Maruo, H. and Hirata, Y.212-623-85, Study Group 212 Physics Of Welding Annual Assembly 1985, Strasbourg, France. AGENDA, Lancaster, J.F.212-628-85, Fusion Characteristics Of Pulsed MIG Deposits On 304 Stainless Steel Plate, Oliveria Santos, J.F. and Allum, C.J.212-631-85, A Study Of The Arc Attachment Mechanism At The Anode Surface And Its Effect On Weld Shape Variability In DCEN TIG Welding Of Some Austenitic Stainless Steels, Fihey, J.-C.212-632-86, Diagnostics On The Ar-N2 Arc Plasma By Monowavelength Laser Interferometry With A 2-Optical Flat, Junyue, L., Shiqian, Z., Yishan, L. and Zhilian, F.212-633-86, Method Of Measuring Argon Arc Plasma By Monowavelength Laser Interferometry, Jun-Yue, L. and Yi-Shan, L.212-634-86, New Analytical Formulae For Tridimensional Temperature Field Of Normal Distribution Welding Source, Jiarui, Z. and Yidan, L.212-640-86, The Anode Boundary Region In Argon Shielded Tungsten Arcs, Lancaster, J.F.212-641-86, Process Analysis For Submerged Arc Welding - Arc Stability And Instantaneous Value Curves For Electrical Variables With Varying Process Parameters, Dorn, L. and Rippl, P.212-646-86, Study Group 212 Physics Of Welding Intermediate Meeting 1986, The Welding Institute, London. Agenda, Lancaster, J.F.212-647-86, Rectangular Wave AC TIG Welding Of Aluminium Alloy, Maruo, H. and Hirata, Y.212-648-86, Study On Gas-Tungsten-Arc Electrode -Comparative Study On Characteristics OfTungsten-Oxide Cathode-, Ushio, M. and Matsuda, F.212-649-86, The Effect Of Short Circuiting Current Control On The Reduction Of Spatter Generation In CO2 Arc Welding, Yamamoto, H., Okazaki, K. and Harada, S.212-650-86, Study On Pulsed GMA Welding With Short Circuit, Ueguri, S., Tabata, Y., Iwata, A. and Mizuno, T.

Page 4

212-651-86, Slag Formation During GTAW Of 304 Stainless Steel, Yamauchi, N.212-652-86, Effect Of Electrode Geometry On Maximum Arc Pressure In Gas Tungsten Arc Welding, Hiraoka, K., Okada, A. and Inagaki, M.212-653-86, Optimization Of Welding Parameters By A Numerical Model -Thin Plate TIG Arc Welding-, Ohji, T., Nishiguchi, K. and Kometani, Y.212-654-86, Dynamic Characteristics Of The Molten Pool Shape In TIG Arc Welding Process Of Thin Sheet, Nakata, S., Jie, H. and Kawahara, F.212-656-86, Experimental Studies On The Various Convectional Flow In The Molten Pool, Ishizaki, K., Yokoya, S., Okada, T. and Matsunawa, A.212-657-86, Interaction Between Supersonic Jet And Burning Iron Wall In Oxygen Gas Cutting, Matsunawa, A., Nakai, T. and Okamoto, I.212-658-86, On Determining The Shape Of Weld Pools, Craine, R.E.212-659-86, Nitrogen Absorption From Welding Arcs, Allum, C.J.212-660-86, Study Group 212 Physics Of Welding Intermediate Meeting 1986 At The Welding Institute, London, England. MINUTES Of The Meeting Held On 2nd and 3rd Of April 1986., Lancaster, J.F.212-662-86, Study Group 212 Physics Of Welding Annual Assembly 1986, Hotel Pacific, Tokyo. AGENDA, Lancaster, J.F.212-667-86, Study Group 212 Physics Of Welding Annual Assembly 1986, Hotel Pacific, Tokyo. MINUTES Of The Meeting Held on 15, 16, 17 and 18 July 1986, Lancaster, J.F.212-668-86, Study Group 212 Circulation List As At 1 Aug 86, Anon.212-679-87, Study Group 212 Physics Of Welding Intermediate Meeting 1987 Welding Institute, Bratislava. MINUTES Of The Meeting Held On 14 And 15 April 1987, Lancaster, J.F.212-681-87, Study Group 212 Physics Of Welding Annual Assembly 1987, Palace Of Culture, Sofia. AGENDA, Lancaster, J.F.212-692-87, The Stability Of Meridional Liquid Flow Induced By A gradient Of Surface TensionOr By Electromagnetic Forces, Lancaster, J.F.212-693-88, The Influence Of An Axial Magnetic Field On The Properties Of TIG-Welds In Austenitic Stainless Steel, Malinowski-Brodnicka, den Ouden, G. and Vink, W.J.P.212-694-88, Study Group 212 Notice Of Meeting. Intermediate Meeting 1988, Lancaster, J.F.212-699-88, The Development And Application Of A Synchronized, Twin Arc Frequency Modulated Pulsed GMAW/MIG Welding System, Ditschun, A., Eaton, N.F., Lassaline, E. and Zajaczkowski, B.212-701-88, Effect Of Welding Capacitors Upon The Alternating - Current Arc Behavior, Mecke, H. and Dobbelin, R.212-707-88, Model Experiments Of Weld Pool Convection And Penetration Shape In TIG Arc Welding, Matsunawa, A., Yokoya, S., Okada, T. and Asako, Y.212-708-88, Effect of Surface Active Elements On TIG ARC Welding Phenomena, Okada, T., Yokoya, S. and Isizaki, K.212-711-88, Measurement Of Drop Transfer Stability In Weld Processes With Short Circulating Drop Transfer, Budai, P.212-712-88, Study Group 212 Physics Of Welding Annual Assembly 1988, Congress Centre Hofburg, Vienna. MINUTES Of The Meeting Held On The 6th, 7th and 8th July 1988, Lancaster, J.F.212-713-88, Holografic Interferometry Of A Magnetically Deflected Arc Column Relevant To TIG Arc Welding Configurations, Blass, J., Heidenhain, J. and Bauder, U.H.212-714-88, Study Group 212 Circulation list As At 1 Aug 88, Anon.

Page 5

212-715-88, Study Group 212 Physics Of Welding. Annual Report 1988, Lancaster, J.F.212-716-88, Effects Of Ambient Pressure On GTA Welding Of Ferritic Steel, Zijp, J.P. and denOuden, G.212-718-89, Flow In The Weld Pool, Lancaster, J.F.212-719-89, Dynamic Surface Tension And Surface Energy Theory On The Heat Transfer AndPenetration In Arc Welding, Ishizaki, K.212-720-89, Current And Time Required To Break Up A Conducting Liquid Bridge, Maruo, H. and Hirata, Y.212-723-89, Electromagnetic Stirring And Grain Refinment In Stainless Steel GTA Welds, Villafuerte, J.C. and Kerr, H.W.212-732-89, Study Group 212 Physics Of Welding Intermediate Meeting 1989. The Welding Institute 1989. MINUTES Of The Meeting Held On 5th And 6th April 1989, Lancaster, J.F.212-733-89, GTA Electrode Temperature Measurement And Its Related Phenomena, Ushio, M., Sadek, A.A. and Matsuda, F.212-735-89, Criterion Of Optimization Of GMA/CO2 Welding Process, Orszagh, P. and Sencak, V.212-737-89, Spattering -English Translation Of Section 5.4 Of The Arc Phenomena, Hasegawa, M.212-738-89, The Physics Of Spatter Formation During Dip Transfer GMA Welding, Anon.212-743-89, Study Group 212 Physics Of Welding Annual Assembly 1989. Dipoli Congress Centre, Helsinki. MINUTES Of The Meeting Held On 6th, 7th and 8th September 1989, Lancaster, J.F.212-750-90, A Mathematical Model Of Laser Keyhole Welding At Medium To High Speeds, Dowden, J., Kapadia, P. and Chang, W.S.212-751-90, The Oscillation Of An Ellipsoidal Weld Pool In The Theory Of Laser Welding, Postacioglu, N., Kapadia, P. and Dowden, J.212-752-90, The Effects Of Current Wave Shape And Electrode Wire Contents On Metal Transfer In High Speed Pulsed MAG Welding, Matsui, H. and Suzuki, H.212-757-90, Optimization Of Static And Dynamic Characteristics Of The Increased Frequency Welding Sources, Iskhakov, A.S., Statnikov, E.S. and Ushakov, A.V.212-759-90, Flow And Pressure Distribution In Semi-Infinite Liquid Due To The Discharge Of An Electric Current And To The Presence Of A Surface Tension Gradient, Lancaster, J.F.212-763-90, Adaptive Control Of Torch Position With Arc Sensor, Orszagh, P. and Sencak, V.212-765-90, Serviceability Of Tungsten Electrodes In Arc Welding, Nesterov, A.F., Bukarov, V.A. and Anisimov, V.V.212-789-91, Negative Ions In Arc Discharge Column, Pokhodnya, I.K. and Shvachko, V.I.212-793-91, An Electrode Extension Model For Gas Metal Arc Welding, Quinn, T.P. Madigan, R.B. and Siewert, T.A.212-821-92, TIG Arc Configuration For Temperature And Other Measurements, Anon.212-836-93, Study On Anode Fall Voltage And Radiation In Argon-Helium Mixed Gas Arcs, Zijp, J. and Hiraoka, K.212-837-93, Modelling Of Heat And Fluid Flow In Arc Welding, Matsunawa, A.212-845-93, Study Group 212 Physics Of Welding Annual Assembly 1992, Glasgow, United Kingdom. MINUTES Of The Seminar In Honour Of J.F. Lancaster Held On Wednesday 1 September 1993, den Ouden, G.212-846-93, Study Group 212 Physics Of Welding Annual Assembly 1993, Glasgow, United Kingdom. MINUTES Of The Meeting Held On 2 and 3 September 1993, den Ouden, G.

Page 6

212-847-93, Study Group 212 Physics Of Welding Circulation List As At 1 October 1993, Anon.212-855-94, Computer Simulation Of Fluid Dynamics And Heat Transfer In Full-Penetrated TIG Weld Pools With Surface Depression, Wu, C.S. and Dorn, L.212-858-94, Measurement Of Electron Density Of Arc Plasma By IR Radiation, Ohji, T., Yoneoka, K., Yoshioka, N. and Yamadori, H.212-860-94, Study On The Characteristics Of Underwater Plasma Arc, Junyue, L., Huan, L. and Yong, H.212-861-94, Glow Discharge Brazing, Pengsheng, Z., Erming, Y., Yuping, Y. and Guojun, Z.212-862-94, Analysis On The Deformation Coupled With Heat Flow During Friction Welding By A Finite Element Method, Liyu, D., Li, F., Suigeng, D. and Weiqing, S.212-864-94, Some Features Of The Component Distributions In Welding Arc, Yonglun, S. andJunyue, L.212-866-94, General Situation On Research Of Welding Physics In China, Junyue, L.212-871-94, Study Group 212 Physics Of Welding Annual Assembly 1994, Beijing, China. Minutes Of The Meeting Held On 7 and 8 September 1994, den Ouden, G.212-872-94, Study Group 212 Physics Of Welding Circulation List As At 1 October 1994, Anon.212-880-95, Synergetic Features Of Pulsed TIG Welding With Full Penetration, Maloletkov, A.V. and den Ouden, G.212-891-93, Study Of A Consumable Anode In An Electric Welding Arc, Simpson, S.W., Zhu, P. and Rados, M.I-1004-93, Annual Statement. - Glasgow (U.K.) 1993, Anon.I-1005-94, Estimation Of Heat Flow Distribution On A cutting front With A Least Squares - Collocation Method On The Boundary, Matsuama, K.-I.I-1013-94, High Speed Flame Cutting Proces, Grohmann, P.I-1024-94, High Tolerance Plasma Arc Cutting, Harris, I.D. and Lowery, J.F.I-1026-94, Annual Report Of The Chairman, Anon.I-1027-95, Preliminary Agenda For Commission. I during IIW, Annual Assembly, Stockholm, June 13-16, 1995, Anon.I-1036-96, Annual Assembly Budapest 1996, Engblom, G.I-1070-2002, Fracture Behaviour of Mis-Matched Dissimilar Welds: Experimental Results, Martin, G.; Hornet, P.; Kocak, M.; Motarjemi, A.K.I-1089-99, Lisbon Resolutions, Engblom, G.I-1090-99, Documents In Progress In Commission 1, 1999-2000, Engblom, G.I-414-70, Vacuum Brazing - '70, Schwartz, M. M.I-415-70, Preheating Temperatures For Flame-Cut Steels, anon.I-483-72, The Influence Of Thermal Cutting And Its Quality On The Fatigue Of Steel St-52-3, Anon.I-521-73, Heating Temperature Of Low And Medium Alloy Carbon Steel Before Oxy Cutting, Antonov, I.A. and Spektor, O.C.I-541-74, Partial Results Of The Inquiry Regarding The Development Of Oxygen Lancing Process, Anon.I-542-74, Project Concerning A Code Of Practice For Thermal Boring, Anon.I-573-74, The Relation Between The Residual Stress, Microstructure And Microhardness Of Gas - And Plasma Cut Surfaces., Goldberg, F., Ruge, J., Schimoller, H., and Sabelstrom, W.I-583-76, Projection D'Aluminium A L'arc Electrique, Giertsen, S.B. and Kunzmann, P.M.

Page 7

I-589-76, Pressure Regulators For Gas Cylinders Used For Welding, Cutting, And Allied Processes, Anon.I-590-76, Methods And Equipment For Improving The Productivity Of Workshops Using Mechanised Thermal Cutting, Stig, B.I-591-76, Practical Applications Of Plasma Automatic Cutting Machines Contrasting Conventional, Secondary Shielding Gas, And Water Injection Systems, Owen, B.D.I-593-76, Development Of Supersonic Contoured Nozzle For Flame Cutting, Anon.I-605-77, A Survey Of Underwater Cutting Of Metals, Goldberg, F.I-607-77, Symboles Et Pictogrammes Utilisables Sur Les Materiels De Coupage Thermique, Anon.I-608-77, History Of Thermal Cutting, Anon.I-609-77, Dimensional Control Of Profiles And Recommended Machine Flame-Cutting Techniques, Owen, B.D. and Weld, M.I-610-77, The Evaluation Of The Various Methods Of Profile Shape Definition As Input Data To Flame Cutting Machines., Anon.I-611-77, Chapter IV - Effect Of Auxiliary Devices With Which The Machines May Be Equipped, I-612-77, Kerf Formation And Dross Adherence In Plasma Arc Cutting, Nishiguchi, K. and Matsuyama, K.I-613-78, General Mechanisms And Terminology Of Degradation Of Surface, Anon.I-614-77, Methods Of Testing Surface Weld, Anon.I-623-78, Determination And Presentation Of capacity Curves, Anon.I-625-78, VI-Effect Of The Organisation Of The Oxygen Cutting Site, Anon.I-626-78, The Effectiveness Of hard Facing - The Analysis Of Field Trials, Hague, F., Moore, A.J.W., Perrott, C.M., and Robinson, P.M.I-630-78, Classification OF hardfacing Materials In Australia, Anon.I-644-79, Hoses For Gas Welding And Allied Processes, I-647-79, Examples Of Maintenance Surface Welding Of Wearing Parts Of Machinery Used InLignite Mining And Preparation, Anon.I-648-79, Solderability - Definitions, Anon.I-650-79, Organisation Of The Cutting Site And Work Place, Anon.I-651-79, Machine Guiding And Control Devices, Anon.I-652-79, Practical Applications Of Plasma Automatic Cutting Machines, Anon.I-653-79, Methods Et Equipements Pour Ameliorer La Productivite Dans Les Ateliers Utilisant Le Coupage Thermique Mecanise, Larue, J.P.I-654-79, Some Historical Notes On Thermal Cutting Process, Anon.I-655-79, Effect Of Anti-Corrosive Priming Paints On Gas Cutting, Anon.I-667-80, Questionnaire On Fuel Gas Application, Anon.I-668-80, Hoses For Gas Welding And Allied Processes, Anon.I-669-80, Guide Lines For The Preparation Of Operating Instructions For Oxy-Fuel Gas Equipment., Anon.I-670-80, Design Considerations For Brazing And Soldering, Bell, G.R. and Strauss, R.S.I-674-80, Machine Guiding And Control Devices SCIB Members., Anon.I-676-80, Method Of Evaluating Thermal Cutting Nozzle Systems And Recording Operating Data, SCIB Members.I-677-80, Standard For Quality Classification Thermally Cut Metal Surfaces, Copleston, F.W.I-680-80, Flame Straightening And Control Distortion. Introduction And Theory., Bernard, P.

Page 8

and Copleston, F.W.I-686-80, Behaviour Of Active Aluminum Brazing Flux. Metal Iron Acting As a Surfactant., Qi-Yun, Z., Chao-Gui, Z., and Shu-Qi, L.I-692-81, Evaluation Of A Questionnaire (doc.I-667-80) On Fuel Gas Application For Gas Welding, Cutting And Allied Processes., Anon.I-693-81, Thermal Spraying In The Aluminum Industry: A Choice Of Applications, Kunzmann, P.I-694-81, Thermal Cutting - Methods And Equipment For Improving Productivity In Workshops Using Mechanical Thermal Cutting, Larue, J.P.I-695-81, Method Of Evaluating Thermal Cutting Nozzle Systems And Recording Operating Data - Part 1 - Oxy-Fuel Gas Nozzles., I-697-81, Development Of High Productivity Stack Gas Cutting Equipment, Yoshimatsu, T., Endo, Y., Kondo, H., Yamada, T., Yamamoto, Y., Nakanishi, M., and Tamaru, A.I-698-81, Standard For The Measurement Of Noise Emitted From Oxy-Fuel Gas Equipments, Gutermann, T. and Copleston, F.W.I-699-81, Flame Straightening - Basic Information, Bernard, P. and Copleston, F.W.I-703-81, Investigation Of Physical And Chemical Processes In 22XC Ceramic - Metallic Welded Joints, Kazakov, N.F., Galabutskama, E., Beltukov, O., and Boyko, B.I-704-81, Diffusion Welding Of Large-Pored Materials, Kazakov, N.F., Soluyanov, E.K, and Shibrajev, B.F.I-714-82, Some Problems Of Vacuum Soldering, Kansky, E., Erjavec, B., Ros, Z., and Golob, V.I-715-82, Role Of ZnCl2 In Flux In Brazing Of Aluminum And Its Alloys With AlSol2 Filler MetalFor Brazing, Martini, J. and Kejzar, R.I-717-82, Diffusion Joining Group - Proposed Definitions, Anon.I-724-82, Flame Characteristics Of Oxygen Fuel Gas Systems And Their Relationship To Industrial Applications, Duboz, G. and Copleston, F.W.I-726-82, Non-Destructive Testing Of Thermally Sprayed Coatings By Ultrasonic Methods And Acoustic Emission Anaysis, Steffens, H.A. and Crostack, H.A.I-728-82, Weld Surfacing Of Plugs For Hot Tube Piercing Of Steel, Moestue, H.I-729-82, Submerged-Arc Cladding Of Rolls In Continuous Casting Machines, Moestue, H.I-730-82, Design Guidelines For Thermal Spraying, Anon.I-731-82, Weld Surfacing Of Forging Dies, Moestue, H.I-732-82, Surface Coating By Means Of Physical Evaporation Procedure, Lugscheider, E. and Reimann, H.I-733-82, Surface Protection By Chemical Vapour Deposition, Lugscheider, E. and Reimann, H.I-743-83, High Pressure Waterjet Cutting, Andersen, C.BI-744-83, Standard For Geometric Quality Classification Of Thermally Cut Metal Surfaces < 100 mm Thickness, SCIE Members.I745-83, Time Definitions In Oxy Fuel Gas Cutting, Anon.I-759-84, Degradation In Diffusion-Welded Joint Of Dissimilar-Metal Combination At Elevated Temperatures, Enjo, T., Ikeuchi, K., and Akikawa, N.I-762-84, The Application Of Solid State Diffusion Bonding For Joining Different Metals, Lison, R.I-776-84, Assemblage, Coupage Et Rechargement Par Procedes Thermiques / Joining, Cutting And Surfacing By Thermal Processes, Anon.

Page 9

I-777-85, Joining, Cutting And Surfacing By Thermal Processes: Agenda For The Strasbourg Meetings, Anon.I-778-85, Joining, Cutting, And Surfacing By Thermal Processes: Chairman's Report., Anon.I-780-85, Sub-Commission I A Annual Report 1984/85, Anon.I-781-85, Report Of The Second Meeting Of ISO/TC 44/SC 12 - Flux And Soft Shoulder Alloys. Berlin, 3 to 5 October 1984, Anon.I-782-85, Investigation Of The Ductility Of High Temperature Brazed Joints By Notch-Bend Impact Tests, Lugscheider, E., Krappitz, H., and Ait-Mekideche, A.I-783-85, Wide Gap Brazing Of Stainless Steel With Nickel-Base Brazing Alloys, Zhuang, H., Lugscheider, E., and Chen, J.I-785-85, Publications On Health And Safety In Soldering, Anon.I-786-85, Proposal For ISO Standard For Special Soft Solders, Anon.I-787-85, Check List On The Brazing Specification, Bell, G.R.I-788-85, Brazing Terms, Bell, G.R.I-789-85, Glossary Of Soldering Terms, Anon.I-790-85, The Welding Process Committee Of The Japan Welding Society, Ohmae, T., Fukaya, Y., Hirai, S., and Egeta, M.I-791-85, Assemblee Annuelle De Strasbourg: Rapport Annuel Du President De La Sous Commission 1 E., Larue, J.P.I-792-85, Light Emission In Thermal Cutting, Andersen, C.B., Copleston, F.W.I-794-85, The Effect Of Lower Oxygen Purity In Oxy-Thermal Cutting, Anon.I-795-85, Techniques For Piercing In Oxygen Cutting Machines, Goldberg, F.I-796-85, Plasma Cutting On Water Table: Prevent Hydrogen Explosions, Anon.I-802-85, Rebuilding And Hardfacing Maganese Crusher Cones And Mantles, Moestue, H.I-803-85, Non-destructive Testing Of Arc- And Plasma-Sprayed Coatings By Ultrasonic Imaging Technique, Crostack, H.-A., Kruger, A., and Steffens, H.-D.I-804-85, Multi-Layer Submerged Arc Surfacing With High Chromium Iron Alloy, Mizoguchi, S.,Tanigaki, T., Tokura, M., Koike, H., and Nishimura, H.I-805-85, Guidelines For Testing Of Arc And Flame Spraying Equipment, Anon.I-806-85, Rapport Annuel De La Commission I. Assemblage, Coupage Et Rechargement Par Procedes Thermiques. Assemblee Annuelle De Strasbourg - 2/7 Septembre 1985, Anon.I-808-86, Agenda For The Toyko (Japan) Meetings From 14 To18 July 1986, Anon.I-809-86, Chairman's Report, Anon.I-810-86, Sub. - Commission IA Annual Report 1985/86, Lugscheider, E.I-811-86, Bonding Copper To Alumina Ceramics Bonding Method To Avoid Cracking In Ceramics, Hamada, K., Kureishi, M., Enjo, T., and Ikeuchi, K.I-812-86, Diffusion Bonding Of Alumina Ceramics To Carbon Steel, Hamada, K., Kureishi, M., Enjo, T., and Ikeuchi, K.I-813-86, Transient Liquid Insert Metal Diffusion Bonding Of Ni-Base Cast Superalloy, MM007,Nakao, Y., Kazutoshi, K., Shinozaki, K., and Kang, C.I-814-86, Auger Microanalysis Of Surface Film On Diffusion-Welded Interface, Ohashi, O., Tanuma, K., and Yoshihara, K.I-815-86, Fundamental Study Of Solid State Bonding, Nishiguchi, K. and Takahashi, Y.I-816-86, Clearance Filling Test For Evaluation Of Brazability Of Aluminum, Kawakatsu, I., Okamoto, I., Kawase, H., Takemoto, T., and Liu, K.I-818-86, Ceramic/Metal Joining For Structural Applications, Nicholas, M.G. and Mortimer, D.A.

Page 10

I-819-86, Wide Gap Brazing With Nickel-Base Filler Metals, Lugscheider, E. Dietrich, V. Mittendorff.I-820-86, Assemblee Annuelle De Toyko (Juillet 1986) Rapport Annuel Du President De La Scie, Anon.I-821-86, Improving Cut Quality Of The Thin Plate Sheets With High Purity Oxygen Plasma Arc Cutting With Oxygen Curtain Flow, Nishiguchi, K. and Matsuyama, K.I-822-86, An Example Of Technological Development In Gas Pressure Welding Of Concrete Reinforcing Bars In Japan, Kimura, T., Shibata, S., and Yokokawa, T.I-823-86, The Laser Cutting Process, Olsen, F.O.I-824-86, Code Of Practice For machine Oxycutting High Thickness 100 - 400 mm (excluding piercing), Anon.I-825-86-, Application Of Diffusion Joining In Industries In Japan, Nakamua, H.I-826-86, Sub. -Com. IC-Surfacing and Thermal Spraying Activity Report 1985/86, Malik, M.I-827-86, Report Of ISO/TC 44/SC 8 - Meeting In Berlin From 15 to 18 April 1986, Steidl.I-828-86, Minutes Of The Meetings Held In Toyko, Anon.I-832-86, Protection Against Wear By Surfacing With Welding Pastes, Kretzschmar, E.I-834-86, Hazards Of Airborne Pollution In The Spraying Industry, Moreton, J. and Bucklow, I.A.I-835-86, Water-Resistant Hardfacing With Cored Wire Electrodes Of Fe-Cr-C Alloys, Drzeniek, H., Kowalski, M., and Lugscheider, E.I-836-86, The International Thermal Spraying Conference Regulations For The Standard Committee, Bucklow, I. and Bell, G.R.I-837-86, The International Thermal Spraying Conference Guidelines For The National Organizing Committee, Bucklow, I. and Bell, G.R.I-838-86, The Role Of IIW In The Field Of Coatings Applied By Thermal And High Energy Processes, Malik, M.I-839-86, Comparison Between Laser, Plasma, Waterjet, Oxygen Cutting And Other Mechanical Cutting Processes For Thin Thickness (0,5 up to 5mm), Andersen, C.B.I-840-86, Séance Du 18 Juillet 1986/Meeting Held On 18 July , 1986, Anon.I-841-86, Rapport Annuel De La Commission I: Brasage, Coupage Themique Et Procedes Avec Flamme, Anon.I-842-86, General Report Of Comission I, Anon.I-843-87, Agenda For The Sofia (Bulgaria) Meetings From 7 To 11 July 1987, Anon.I-844-87, Sub-Commission 1A Annual Report 1986/87, I-845-87, Melting Point Of A Nickel Based Filler Metal (BSI-NKS; AWS-BN14), Johnson, R.I-846-87, Fatigue - And Creep - Behavior Of Brazed Joints, Anon.I-847-87, Rapport Annuel D'Activities De La Sous-Commission IE, Larue, J.P.I-848-87, Fumes, Solid Particles And Metallic Vapors In Thermal Cutting, Andersen, C.B.I-849-87, Le Bruit En Coupage Themique, Larue, J.P.I-851-87, Chairman's Report, Anon.I-856-87, Report General De La Commission I / General Report Of Commission I., Anon.I-858-88, Development Of Vapor Shielded Pressure Bonding Process For Nonferrous Metals, Machida, K., Kashiba, Y., Okuda, T., and Nakata, S.I-859-88, Determination Of Optimum Process Conditions In Solid Phase Bonding, By A Numerical Model, Takahashi, Y. and Nishiguchi, K.I-860-88, Active Brazing Of Silicon-Carbide To Steel Using A Thermal-Stress Reducing Metallic Interlayer, Lugscheider, E., Boretius, M., and Lison, R.

Page 11

I-861-88, Brazing Technology With Silver Brazing Paste, Nagano, T. and Takei, T.I-862-88, The Effect Of Joint Clearance On Fatigue Strength Of Brazed Joint, Sasabe, K.I-863-88, Creep Strength Of Brazed Joints Of Austenitic Stainless Steel, Ruza, V., Velky, M., and Malik, K.I-864-88, Wide Gap Brazing Of Stainless Carbon Steel, Lugscheider, E. and Schittny.I-865-88, Brazing Fume Exposure At Work, Lugscheider, E. and Dietrich, V.I-866-88, Modelling Solid-State Diffusion Bonding, Hill, A. and Wallach, E.R.I-867-88, Chairman's Report Of The Sub-Commission IE, Anon.I-868-88, Agenda For The Vienna (Austria) Meetings From 2 to 9 July 1988, Anon.I-873-88, Rapport Annuel De La Commission I / Assemblee Annuelle De Vienne - 2/9 Juillet 1988, Anon.I-874-89, Rapport General De La Commission I (Autriche 1988) / General Report Of Commission I (Austria 1988), Anon.I-877-89, Agenda For The Helsinki (Finland) Meetings From 5 To 9 September 1989, Anon.I-878-89, Annual Report Of Activity, Grundmann, J.I-879-89, Subcommission IA, Annual Report 1988/89, Christensen, J.I-880-89, Flame Cleaning As A Corrosion Protection measure For Steel And Concrete Surfaces, Beilner, O. and Engblom, G.I-881-89, Concrete Flaming, Grundmann, J.I-882-89, The Mechanism Of Laser Cutting, Miyamoto, I. and Maruo, H.I-883-89, Influence Of Gaseous Impurities In The CO2 Laser Cavity, Beaudrouet, D., Marie, B., and Van Der Have, P.I-884-89, Classification And Test Methods For Solder Pastes, Anon.I-885-89, Amendment Of 1S0 2553 To Include Brazing Joints, Scott, M.H.I-898-89, Concrete Surface Plasma Treatment And Its Applications In The USSR, Finkel'shtein, A. and Petrov, A.I-899-89, Precision Plasma Arc Cutting, Bogorodskii, Yu.A., Rossomakho, Ya. V., and Olennikov, E.F.I-903-89, Study On Corrosion Resistance Of Stainless Steel Brazed Joints Under Loading Using Method Of Polarization Resistance, Khorunov, V.F., Polyakov, S.G., Panasenko, T.M., and Vladimirskaya, I.A.I-905-89, Annual Report Of Commission I. - Helsinki Annual Assembly - 2/9 September 1989, Anon.I-907-90, Development Of Air - Cooled And Non - Transferred Air Plasma Arc Cutting Machine, Fujiwara, O., Araya, T., Asoh, T., Shimada, M., and Saitoh, H.I-908-90, Provisional Agenda For The Montreal (Canada) Meetings From 24 To 27 July 1990, Anon.I-910-90, Sub-Commission IA, Annual Report 1989/90, Christensen, J.I-911-90, Annual Report Of The Activities Of Sub-Commission IE. - Montreal July 1990, Anon.I-912-90, Diffusion Bonding Of Aluminum Bronze To Stainless Steel And Improvement Of The Weldability, Serino, M., Masumoto, H., Asada, A., Nishio, K., Mukae, S., Katoh, M., and Honda, T.I-913-90, Forming And Bonding Y1Ba2Cu7-y Superconductor, Matsui, K., Kawachi, K., Katsutani, R., Nakanishi, Y., Irisawa, T., and Kohno, T.I-914-90, Quality Classification Of Thermally Cut Surfaces, Engblom, G. and Falck, K.I-915-90, Comparative Performances Of CO2 And YAG Lasers In The Cutting Of Stainless Steel, Poncon, V., Guillas, C., Le Gall, C., Theveney, S., and Lefebre, P.

Page 12

I-916-90, Oxygen Quality In Laser Cutting Of Low Carbon Steel And Stainless Steel, Poncon, V., Guillas, C., and Le Gall, CI-917-90, Production Of Clad Metals By Vacuum Roll Bonding, Mukae, S., Nishio, K., Katoh, M., Inoue, T., and Hatanaka, N.I-918-90, Applications Of Diffusion Joining In Industries In Japan (2nd Report), Anon.I-919-90, Graphite To Molybdenum Brazing With Active Brazing Foil, Fuse, T., Honda, K., and Shibui, M.I-926-90, Improvement In Bonding Strength Of Si3N4-Mo Joint By Controlling Reaction Layer Thickness, Nakao, Y., Nishimoto, K., and Saida, K.I-927-90, General report Of Commission I / Rapport General De La Commission I, Anon.I-932-91, Subcommission IA, Annual Report 1990/91, Christensen, J.I-934-91, Joint Characteristics By Ni Brazing Alloy (Report 1), Anon.I-935-91, Agenda For The Hague (Netherlands) Meeting From 2 to 5 July, Anon.I-936-91, Chairman's Report, Anon.I-937-91, Energy Redistribution In Laser Cutting, Powell, J., Ivarson, A., Ohlsson, L., and Magnusson, C.I-938-91, Laser Cutting Of Magnesium Alloys, Bronstad, B.M.I-940-91, Laser Cutting Steel - Cut Quality Depending On Cutting Parameter, Dilthey, U. and Faerber, M.I-941-91, Laser Beam Cutting Of Stainless Steel, Petring, D. and Beyer, E.I-942-91, Bevel Cutting, Broden, G., Engblom, G., and Falck, K.I-943-91, Trends In Materials, Welding And Cutting, Anon.I-954-91, General report Of Comission I / Rapport General De La Comission I, Anon.I-956-92, Development Of Cold Solid Phase Welding, Nakamura, T. and Kaihara, S.I-957-92, It's Weldability In Plasma Gouging Grooves, Sonoda, H., Kawaguchi, Y., Fujiyama, H., Inamura, A., and Okuyama, K.I-961-92, Annual Report On Activities In SC1E, Engblom, B.I-964-92, Solid State Diffusion Bonding Of Alumina And Zirconia, Christensen, J. and Nielson,P.D.I-965-92, Agenda For The Madrid Meetings From 8 To 11 September 1992, Anon.I-966-92, General Information, Messager, C.I-967-92, Abrasive Water Jet Cutting And Applications At The Welding Institute, Harris, I.D.I-968-92, Backfire And Flashback In Oxyfuel Processes, Broden, G. and Falck, K.I-983-93, An Advanced Lining Method Of White Metal On Carbon Steel, Mizo, Y., Kawashima,I., and Sakai, K.I-986-93, Agenda For Glasgow Meetings, Anon.I-987-93, Sub-Commission IA, Annual Report 1992/93, Anon.I-995-92, Study On Glass-Metal Bonding By Anodic Bonding, Toyoda, M., Fujita, F., Nayama, M., and Yamada, T.I-A-308-84, Draft Standard For Soft Soldering Fluxes, Anon.I-A-309-84, Proposal For ISO Standard For Soft Solders, Anon.I-A-310-84, Antimony In Soft-Solders. A Review Of Its Effects And Its Use In The Soldering Industry, Thwaites, C.J.I-A-326-85-, Research On Diffusion Welding Of Cuppronickel To Steel, Ohmae, T., Fukaya, Y., Hirai, S. and Egeta, M.I-A-334-86, Transient Liquid Insert Metal Diffusion Bonding Of Ni-Base Cast Superalloy, MM007, Nakao, Y., Nishimoto, K., Shinozaki, K. and Kang, C.

Page 13

I-A-371-89, Cemented Tungsten Carbide/Carbon Steel Joint Brazed With Copper, Ohmura, H., Kawashiri, K., and Yoshida, T.I-A-385-90, Study On Corrosion Resistance Of Stainless Steel Brazed Joints Under Loading Using Method Of Polarization Resistance, Khorunov, V.F., Polyakov, S.G., Panasenko, T.M. and Vladimirskaya, I.A.I-A-394-90, Improvement In Bonding Strength Of Si3N4-Mo Joint By Controlling Reactor LayerThickness, Nakao, Y., Nishimoto, K. and Saida, K.I-A-397-90, Review Of the State Of The Technology For Joining Ceramics For High-Temperature Structural Applications, Moorhead, A.J. and Kim, H.-E.I-A-399-86, Sagging Property Of Aluminium Alloy Brazing Sheet For Fin Stock, Asano, M., Tohma, K., Iida, M. and Takeuchi, Y.I-B-219-58, Oxygen Cutting Of Metals & Alloys. Notes On Preheating, Anon.I-B-396-78, Some Aspects Of Blowhole Formation In Welding Of Air-Plasma Cut Steel Plates, Nakajima, M., Fujimura, H. and Nitoh, H.I-B-420-81, Standard For Quality Classification Of Thermally Cut Metal Surfaces < 100 mm Thickness, Anon.I-C-500-85, Characterisation Of Powders For Thermal Spraying, Anon.I-C-500-85, Characterization Of Powders For Thermal Spraying, Anon.I-C-502-85, Protection Against Wear By Surfacing With Welding Pastes, Kretzchmar, E.I.I-C-502-85, Protection Against Wear By Surfacing With Welding Pastes, Kretzschmar, E.I-C-503-84, Hardsurfacing Using A Flexible Cord Consumable Producing Deposits Of Cast Tungsten Carbide In A NiCrBSi Matrix Ducos, M. and Bell, G., I-C-509-86, Hazards Of Airborne Pollution In The Spraying Industry, Moreton, J. and Bucklow, I.A.I-C-510-86, Wear Resistant Hardsurfacing With Cored Wire Electrodes Of Fe-Cr-C Alloys, Drzeniek, H., Kowalski, M. and Lugscheider, E.I-C-512-86, The International Thermal Spraying Conference Regulations For The Standard Committee, Bell, G.R. and Bucklow, I.I-C-513-86, The Role Of The IIW In The Field Coating Applied By Thermal And High Energy Processes, Malik, M., I-E-005-82, Description Of Types Of Nozzles Use In Oxy-Fuel Gas Machine Cutting, Verweij, C.I-E-020-83, Definitions Des Sequences De Temps En Oxycoupage, Anon.I-E-024-83, Techniques For Piercing In Oxygen Cutting Machines, Goldberg, F.I-E-095-89, Concrete Surface Plasma Treatment And Its Applications In The USSR, Finkel'shtein, A. and Petrov, A.I-E-096-89, Precision Plasma Arc Cutting, Bogorodskii, Yu.A., Rossomakho, Ya.V. and Olennikov, E.F.I-E-101-90, Quality Classification Of Thermally Cut Surfaces, Engblom, G. and Falck, K.I-E-111-90, Laser Cutting Of Magnesium Alloys, Bronstad, B.M.I-E-113-90, Bevel Cutting, Broden, G., Engblom, G. and Falck, K.I-E-114-90, Gas-Supply Systems For CO2 Lasers, Broden, G. and Taje, R.I-E-115-91, Laser Cutting Of Steel- Cut Quality Depending On Cutting Parameter, Dilthey, U., Faerber, M. and Weick, J.I-E-116-91, Laser Beam Cutting Of Stainless Steel, Petring, D. and Beyer, E.I-E-117-91, Trends In Materials, Welding And Cutting, Anon.I-GT-dif.05-80, Diffusion Welding Of Copper To Aluminum, Enjo, T., Ikeuchi, K. and Akikawa,

Page 14

N.I-GT-dif.06-80, Effect Of Superplasticity On The Diffusion Welding Of Ti-6Al-4V Alloys, Enjo, T., Ikeuchi, K., Akikawa, N. and Ito, M.II-1000-83, Study On The Cr-Ni Austenitic Filler Metal Containing Mn, Araki, Y., Sano, H., Kominami, M. and Oikawa, H.II-1001-83, Sampling And Analysis Of Oxygen And Nitrogen: Present State Of Knowledge AndFuture Development Plan, Anon.II-1002-83, The Determination Of The Hydrogen Content Of Ferritic Arc Weld Metal, Anon.II-1003-83, Welding Procedure For All Weld Metal Test Coupons For Classification Tests Of Covered Electrodes For High Tensile Steels And Steels For Low Temperature Applications, Anon.II-1018-84, The Determination Of The Hydrogen Content Of Ferritic Arc Weld Metal, Anon.II-1020-84, Determination Of Weld Hydrogen Content, Karppi, R., Ruusila, J., Satoh, K., Toyoda, M. and Vartianinen, K.II-1021-84, A New Method For Measuring Diffusible Hydrogen In Weld Metal, Sohrman, B.II-1022-84, All Weld Metal Test Coupon For The Classification Of Low Alloy High Strength Steel Covered Arc Welding Electrodes, Anon.II-1024-84, Round Robin Test About Nitrogen And Oxygen In Weld Metal Preliminary Report And Future working Plan, Raiter, V. and Timerman, V.R.II-1026-84, The Metallurgy Of MMA Hyperbaric Welding, Christensen, N.II-1027-84, The Making Of The IIW Hydrogen Method, Coe, F.R.II-1031-84, Annual Report Of Commission II Arc Welding, Coe, F.R.II-1032-85, Annual Report For 1984/1985, Evans, G.M.II-1035-85, Annual Report For Sub-Commission II-C 1984/1985, Anon.II-1036-85, List Of Members OF Sub-Commission II-C, van Nassau, L.II-1037-85, List Of Documents, Anon.II-1038-85, Report For Sub-Commission II-E To Commission II, 1985, Magnusson, E.J.II-1039-85, List Of Members Of Sub-Commission II-E, Magnusson, E.II-1040-85, Draft Specification For Carbon Manganese Steel Electrodes For Manual Metal Arc Welding, Anon.II-1041-85, Specimen Size For Determination Of Diffusible Hydrogen Content In Weld Metal, Terasaki, T. and Akiyama, T.II-1042-85, Transactions Of The Iron Steel Institute Of Japan, Anon., II-1043-85, Effect Of Aluminum On High-Heat-Input Submerged Arc Weld Metal Toughness, Suzuki, M., Kunisada, Y. and Watanabe, I.II-1044-85, Decomposition Kinetics Of Delta Ferrite In Type 316 Stainless Steel Welds, Gill, T.P.S., Verma, D.D.N., Seetharaman, V. and Gnanamoorthy, J.B.II-1045-85, Improvement Of Notch Toughness By Nitrogen Addition In 2 1/4 Cr-1Mo Weld Metal, Hojo, I., Yamamoto, S., Masaie, N. Okuda, N.II-1046-85, All Weld Metal Test Assemblies For The Classification Of Corrosion-Resisting Chromium And Chromium-Nickel Steel Covered Arc Welding Electrodes, Anon.II-1047-85, Effect Of Manganese On Stainless Steel Weld Metal Ferrite, Szumachowski, E.R. and Kotecki, D.J.II-1048-85, Microstructural Changes During Thermal Aging Of Type 316 Stainless Steel Weld Deposit, Gill, T.P.S., Vijayalakshimi, M., Gnanamoorthy, J.B. and Padmanabhan, K.A.II-1069-86, Metallurgical Characteristics Of Weld Metals And Corrosion Performance Of Girth Weld Joints Of Duplex Stainless Steel Pipes, Yasuda, K., Tamaki, K., Nakano, S. and

Page 15

Nishiyama, N.II-1070-86, The Effect Of Oxide Inclusion On The Microstructure Of The Ti-B Containing Weld Metal, Ohkita, S., Homma, H., Tsushima, S. and Mori, N.II-1072-86, Hydrogen Induced Cracking Susceptibility Of Weld Metal, Okuda, N., Nishikawa, Y., Aoki, T., Goto, A. and Abe, T.II-1073-86, Method Of Measurement For Hydrogen Evolved From Steel Welds, Anon.II-1073-87, Microstructural Development In Mild And Low-Alloy Steel Weld Metals, Grong, O. and Matlock, D.K.II-1074-86, Thermal Analysis Of Hydrogen In Steel, Otsubo, T., Goto, S. and Sato, H.II-1075-86, Transactions Of The Iron And Steel Institute Of Japan (Development Of ApparatusFor Determination Of Diffusible Hydrogen In Steel), Ohtsubo, T., Goto, S. and Amano, M.II-1076-86, All Weld Metal Test Coupon For Testing The Mechanical Properties Of Covered Electrodes For Manual Metal Arc Welding Of Mild Steel, Anon.II-1077-86, Test Piece For The Determination Of Hardness For Covered Electrodes DepositedMetal, Anon.II-1078-86, Comments From Commissions II/X Of The Argentine Delegation Of The IIW On The Doc.II-C-755-86/X-1089-85, Anon.II-1079-86, Hydrogen Measurements - Current Trends Versus Forgotten Facts, Coe, F.R.II-1080-86, The Specification Of Welding Consumables, Shackleton, D.N.II-1081-86, Annual Report Of Commission II. Tokyo Annual Assembly 15-18 July, 1986, Coe, F.R.II-1082-87, Sub-Commission A. Annual Report For 1986-1987, Evans, G.M.II-1083-87, List Of Sub-Commission Members, Evans, G.M.II-1085-87, Annual Report Sub-Commission II C, 1987, Anon.II-1086-87, List Of Members Of Sub-Commission II C, Anon.II-1087-87, List Of Documents Sub-Commission II C, Anon.II-1088-87, Annul Report Of Sub-Commission II-E-1986-1987, Daemen, R.II-1089-87, List Of Members Of Sub-Commission II-E, Daemen, R.II-1090-87, List Of Documents - Sub-Commission II-E-1987, Daemen, R.II-1091-87, Investigation On The Regularity Of Horn-Shaped Propagation Of Solidification Crack Occurring In Weld Metals With The Trans-Varestraint Test, Linmiao, S. and Rihui, P.II-1092-87, Factors Influencing The As-Deposited Strength, Microstructure And Toughness Of Manual Metal Arc Welds Suitable For C-Mn Steel Fabrications, Abson, D.J. and Pargeter. R.J.II-1094-87, Factors Affecting The Microstructure And Properties Of C-Mn All-Weld-Metal Deposits, Evans, G.M.II-1095-87, Agenda For The Annual Meeting, Sofia-7/10 July 1987, Coe, F.R.II-1096-87, A Study On Manganese Reaction And Oxygen Content In Submerged Arc Weldments, Varma, D.V.R., Mohanty, A.M. and Achar, D.R.G.II-1097-87, Effect On Heat Input On The Microstructure And Pitting Corrosion Resistance Of Nitrogen Added Type 304 SS Weld Metal, Kamachi Mudali, U., Gill, T.P.S., Dayal, R.K. and Gnanamoorthy, J.B.II-1098-87, Effect Of Welding Parameters On The Content Of Delta Ferrite In Austenitic Stainless Steel Weld And Clad Metals, Prasad Rao, K., Krishnan, K.N., Rama Rao, V. and Guru Raja, G.J.II-1099-87, Sofia Annual Assembly - 7/10 July, 1987, Evans, G.M.II-1100-88, Annual Report For 1987/1988, Evans, G.M.II-1101-88, List Of Sub-Commission Members, Evans, G.M.

Page 16

II-1102-88, List Of Documents Issued In 1987/88, Evans, G.M.II-1103-88, Annual Report Sub-Commission II C, 1998, Evans, G.M.II-1104-88, List Of Members Of Sub-Commission II C, Anon.II-1105-88, List Of Documents Sub-Commission II-C, Anon.II-1106-88, Annual Report Of SC II E For 1987-1988, Daemen, R.II-1107-88, List Of Members Of Sub-Commission II E, Daemen, R.II-1108-88, List Of Documents Issued To Sub-Commission II E Members After Annual Assembly Of Sofia, July 1987, Daemen, R.II-1109-88, Agenda For The Annual Meeting, Vienna - 5/8 July, 1988, Coe, F.R.II-1110-88, Temper Embrittlement Of 2.25Cr-1Mo Steel Weld Metal - A Literature Survey-, Mejias, H.D. and De Vedia, L.A.II-1111-88, Influence Of Non-Homogeneous Microstructure On The Toughness Of Low-Alloy Steel Weld Metal, Zhiming, Z., Chengwei, C. and Zhonglin, L.II-1112-88, Non-Metallic Inclusions In Ferritic Steel Weld Metals - A Review, Abson, D.J.II-1113-88, All Weld Metal Tests Assembly For The Classification Of Corrosion Resisting Chromium And Chromium-Nickel Steel Covered Arc Welding Electrodes, Anon.II-1114-88, Effects Of Manganese And Nickel On Toughness And Strength Of High Strength Steel Submerged-Arc Weld Metal Of (s = 550 - 800 MPa, Boli, C. and Yunhong, Z.II-1115-88, Nitrogen Absorption From Welding Arcs, Allum, C.J.II-1116-88, Vienna Annual Assembly - 5/8 July 1988, Anon.II-1117-89, Agenda For The Annual Meeting, Helsinki, 5/8 September 1989, Coe, F.R.II-1118-89, Annual Report For 1988/1989, Evans, G.M.II-1119-89, List Of Sub-Commission Members, Evans, G.M.II-1120-89, List Of Documents Issued In 1988/89, Evans, G.M.II-1121-89, Annual Report Sub-Commission II C 1988/1988, Anon.II-1122-89, List Of Members Of Sub-Commission II C, Anon.II-1123-89, List Of Documents; Period June 1988 - June 1989, Anon.II-1124-89, Annual Report Of Sub-Commission II-E For 1988-1989, Daemen, R.II-1125-89, List Of Members Of Sub-Commission II-E, Daemen, R.II-1126-89, List Of Documents Issued By Sub-Commission II-E After The Annual Assembly In Vienna - July 1988, Daemen, R.II-1128-89, The Effect Of Atmospheric Condition On Weld Metal Diffusible Hydrogen Content, Dickehut, G., Hotz, U.II-1129-89, Guidelines For Handling Storage And Rebaking Of Covered Steel Electrodes, Anon.II-1130-89, A Study Of The Manganese-Oxygen System In Low Hydrogen MMA All-Weld-Metal Deposits, Abson, D.J. and Evans, G.M.II-1131-89, The Method For The Analysis Of Diffusion Hydrogen And Influence Of Welding Conditions On Its Content In Weld Metal, Paltsevich, A.P.II-1132-89, Investigation Into Chemical Heterogeneity Of Weld Metal Alloyed With Carbon Nickel And Manganese, Pokhodyna, I.K., Voitkevich, V.G., Denisenko, A.V. and Evans, G.M.II-1133-89, Specification For Carbon-Manganese Steel Electrodes For Shielded Metal Arc Welding, Anon.II-1135-90, Annual Report For 1989/1990, Evans, G.M.II-1136-90, List Of Sub-Commission Members, II-1138-90, Annual Report Sub-Commission II C, 1989/1990, Anon.II-1139-90, List Of Members Of Sub-Commission II C, Anon.

Page 17

II-1140-90, List Of Documents: Period July 1989/1989 Sub-Committee. II-C, Anon.II-1144-90, New Results On The Study Of A Simple Method To Evaluate The Moisture Resistance Of MMA Welding Electrodes, Maraniello, E., Smocovich, M. and Timerman, R.II-1145-90, Effect On Nickel And Manganese On Structure And Properties Of Multilayer Weld Metal, Alekseev, A.A., Shevchenko, G.A., Pokhodnya, I.K., Yurlov, B.V. and Yavdoshchin, I.R.II-1146-90, The Effect Of Aluminum In Shielded Metal-Arc C-Mn Steel Multi-Run Deposits, Evans, G.M.II-1147-90, A Study On Impact Toughness And Corrosion Resistance Of Type 317LN Austenitic Stainless Steel Weld Metals, Miyake, T., Kanbe, Y., Koike, H., Enomoto, T., Nagasaki, H. and Ogawa, T.II-1148-90, Specification For Low Alloy Steel Electrodes For shielded Metal Arc Welding, Anon.II-1150-90, The Effect On The Ratio Between Gauge Length And Diameter On Elongation In Tensile Tests On C-Mn And Low-Alloy Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-1153-91, Comparative Studies Of Ferrite Content Of Stainless Steel Weld Metals By VariousMeasuring Methods - Part I, Anon.II-1154-91, Ferrite Measurement And Control In Duplex Stainless Steel Welds, Kotecki, D.J.II-1155-91, Measurement Of Hydrogen In Ferritic Arc Weld Metal Draft IIW/ISO Standard, Anon.II-1156-91, Moisture Resistance Determination For Manual Metal Arc Welding Electrodes (Report II), Anon.II-1157-91, The Effect Of Alloying Elements On The Microstructure And Properties Of Ferritic All-Weld Metal Deposits, Evans, G.M.II-1158-91, The Effect Of The Ratio Between Gauge Length And Diameter On Elongation In Tensile Tests On Stainless Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-1159-91, The Effect Of The Radio Between Gauge Length And Diameter On Elongation In Tensile Tests On Duplex Stainless Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-1160-91, Stainless Steel Electrodes. Table Of Chemical Compositions. Table Of Designation Options. Proposed Uses Of The Fourth Designation Digit. Option C For The UseOf The Fifth Designation Digit, Anon.II-1161-91, List Of Documents: Period July 1990 - May 1991, Anon.II-1162-91, List Of Documents Issued Since The 1990 Annual Assembly, Evans, G.M.II-1162-91, List Of Sub-Commission Members, Evans, G.M.II-1164-91, Annual Report Sub-Commission II C 1990/1991, van Nassau, L.II-1165-91, List Of Members Of Sub-Commission II C, Anon.II-1166-91, List Of Documents: Period July 1990 - May 1991, Anon.II-1167-91, Annual Report Of Sub-Commission II E, 1990/1991II-1168-91, List Of Members Of Sub-Commission II E, Daemen, R.II-1169-91, List Of Documents Issued By The Sub-Commission Since The Annual Assembly Held In Montreal In July 1990, Daemen, R.II-1170-91, Agenda For The Annual Meeting, The Hague, 30 June To 5 July, 1991, Anon.II-1171-91, Relationship Between Structural And Chemical Microheterogeneity Of Welds Alloyed With Nickel-Manganese And Carbon-Manganese, Pokhodnya, I.K., Voitkevitch, V.G., Shevchenko, G.A. and Evans, G.M.II-1172-91, Effect On Phosphorus On Weld Impact Toughness And Chemical

Page 18

Michroheterogeneity, Pokhodnya, I.K., Voitkevitch, V.G., Alexeev, A.A., Denisenko, A.V. and Evans, G.M.II-1173-91, Reproducibility Of The Chemical Analysis Of The Weld Metal Deposited By Covered Electrodes, Maraniello, E. and Timerman, R.II-1174-91, The Hague Annual Assembly, 1 To 5 July, 1991, Anon.II-1177-92, List Of Sub-Commission Members, Evans, G.M.II-1178-92, List Of Documents Issued Since The 1992 Annual Assembly, Evans, G.M.II-1179-92, The Effect Of Micro-Alloy Elements On The Microstructure And Properties OF Ferritic All-Weld Metal Deposits, Anon.II-1180-92, The Rationale Behind The AWS A5 Committee Decisions Regarding Diffusible Hydrogen, Kotecki, D.J.II-1181-92, Oxygen And Nitrogen In Low-Carbon Basic Electrode Weld Metal Deposits, Wegrzyn, T.II-1182-92, Analysis Of Metal Transfer In Shielded Metal Arc Welding, II-1183-92, Influence Of Chromium On Mechanical Properties And Microstructure Of Weld Metal From A High Strength SMA Electrode, Surian, E., Trotti, J., Cassanelli, A. and De Vedia,L.A.II-1184-92, Annual Report Sub-Commission II C, 1991/1992, van Nassau, L.II-1186-92, List Of Documents: Period June 1991-June 1992, Anon.II-1187-92, The Effect Of Shielding Gas Oxidation Potential Of GMA Stainless Steel Weld Metal Microstructure And Toughness, Bilmes, P., Gonzalez, A., Llorente, C. and Solari, M.II-1188-92, Summary Of 5th Round Robin Of FN Measurements, Kotecki, D.J.II-1189-92, Delta-Ferrite In Stainless Steel Weld Metals, Wegrzyn, J.II-1190-92, Welding Duplex And Super-Duplex Stainless Steels. A Guide For Industry, van Nassau, L., Meelker, H. and Hikes, J.II-1191-92, Experience With CPT-Determination By Means Of ASTM 48 An Attempt To Improve It, Lefebre, J. and Potty, A.II-1192-92, Annual Report Of Sub-Commission II-E, Daemen, R.II-1195-92, Specification For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For Shielded Metal Arc Welding, Anon.II-1196-92, Comparative Studies Of Ferrite Content Of Stainless Steel Weld Metals By VariousMeasuring Methods, II-1197-92, Draft Specification For Nickel-Base Alloy Electrodes, Anon.II-1198-92, Interaction Of Molten Metal With Nitrogen For Arc Plasma, Paton, B.E. and Lakomsky, V.I.II-1202-92, Madrid Annual Assembly, 7 To 11 September, 1992, Kotecki, D.J.II-1203-93, Agenda For The Annual Meeting In Glasgow, Scotland 28 August To 4 September,1993, Anon.II-1205-93, List Of Sub-Commission Members, Evans, G.M.II-1206-93, List Of Documents Issued Since The 1992 Annual Assembly, Evans, G.M.II-1208-93, Moisture Residence Determination For Manual Metal Arc Welding Electrodes (report III), Anon.II-1209-93, Characterization Of Moisture Resistant Electrodes, Anon.II-1210-93, Study On Impact Toughness Of C-Mn Multi Layer Weld Metal At -60(C, Chen, J.H.and Yan, C.II-1211-93, The Effect Of Micro-Alloying Elements In C-Mn Steel Weld Metal, Evans, G.M.II-1212-93, Reproducibility And Reliability Of Hydrogen Measurements At A Level Of Less

Page 19

Than 5 Ml Per 100 G Deposit Weld Metal (SMAW), van Wortel, J.C.II-1213-93, Annual Report Of Sub-Commission II-E 1992-1993, Daemen, R.II-1214-93, List Of Members Of Sub-Commission II-E, Daemen, R.II-1215-93, List Of Documents Issued By The Sub-Commission Since The Annual Assembly Of Madrid - September 1992, Daemen-R.II-1216-93, Specification For Carbon-Manganese Steel Electrodes For Shielding Metal Arc Welding, Anon.II-1217-93, Specification For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For Shielded Metal Arc Welding, Anon.II-1218-93, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Anon.II-1219-93, Annual Report. Sub-Commission II C 1992/93, Anon.II-1219-97, A Comparison Of Chemical Composition Of Weld Pads, Anon.II-1220-93, List Of Members Of Sub Commission II C August 1993, Anon.II-1221-93, List Of Document A: Issued Since The 1992 Annual Assembly In Madrid, Anon.II-1222-93, The Results Of Some Investigations Of The Centrifugally Cast Metal And The Proposals To Use It For Preparation The Ferrite Standard Specimens, Merinov, P.II-1223-93, Summary Of The 6th Round Robin On Ferrite Secondary Standards Of The Russian Delegation, Rabensteiner, R.II-1224-93, Procedure For A Round Robin CPT-Determination By Means Of A Modified G48A Method, Lefebre, J., Potty, A. and Soudometal, S.A.II-1225-93, Working Programme 1993/1994, Anon.II-1226-93, Draft working Program For SC II E 1993-1994, Daemen, R.II-1227-93, Response To ISO Vote On ISO/DIS 2560 And 11837, Kotecki, D.J.II-1228-93, 6th Round Robin Test On Ferrite Secondary Standards, Sugaya, Y. and Airara, T.II-1229-93, Annual Report Of Commission II. Glasgow Annual Assembly, 28 August To 4 September, 1993, Kotecki, D.J.II-1231-94, New Advances For Cast Iron Welding In China In The Last Decade, Zhou, Z.F., Sun, D.Q. and Ren, Z.A.II-1232-94, Underwater Wet Welding Consumables For Offshore Applications, Sanchez-Osio, A., Liu, S., Olson, D.L. and Ibarra, S.II-1233-94, Microstructure And Toughness Of Local Brittle Zone Of HSLA Steel Multipass Weld Metals, Cheng, Y. and Jianhong, C.II-1234-94, Effect Of Al In Ti-Microalloyed Mn-Ni-Mo Welding Wire On Microstructure And Toughness OF Deposited Metal, Changying, T., Xianhui, Z. and Weifeng, S.II-1235-94, Investigation Of The Kinetic Process Of Metal-Oxygen Reaction During Shielded Metal Arc Welding, Chen, J.H. and Kang, L.II-1236-94, Moisture Content Of The Coating And Diffusible Hydrogen Of The Weld Metal From E7016 And E7018 Ordinary And Moisture Resistant Types: Round Robin Test, Dickehut,G., Corvalan, P. and Surian, E.II-1237-94, List Of Sub-Commission Members, Evans, G.M.II-1238-94, List Of Documents Issued Since The 1993 Annual Assembly, Evans, G.M.II-1239-94, Working Programme For The Year 1994/1995, Evans, G.M.II-1240-94, Annual Report For 1993/1994, Evans, G.M.II-1241-94, Summary Of Year's Work To Develop IIW Ferrite Secondary Standards, Rabensteiner, G.II-1242-94, Chemical Composition Variations In Shielded Metal Arc Welds, Bracarense, A.Q.

Page 20

and Liu, S.II-1243-94, List Of Members Of Sub-Commission II-C May 1994, Anon.II-1244-94, List Of Documents: Issued Since The 1993 Annual Assembly In Glasgow, Anon.II-1245-94, Working Program 1994-1995, Anon.II-1246-94, Annual Report Sub-Commission II-C 1993-1994, Anon.II-1247-94, Specification For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For Shielded Metal Arc Welding, Anon.II-1248-94, Specification For Nickel And Nickel-Alloy Covered Electrodes For Shielded Metal Arc Welding, Anon.II-1249-94, Outline Of A Draft Standard For The Classification Of Hardfacing Electrodes, Anon.II-1250-94, List Of Members Of Sub-Commission II-E, Daemen, R.II-1251-94, List Of Documents Issued By The Sub-Commission Since The Annual Assembly InGlasgow - September 1993, Daemen, R.II-1252-94, Draft Working Program Of Sub-Commission II E For 1994-1995, Daemen, R.II-1253-94, Annual Report Of Sub-Commission II E 1993-1994, Daemen, R.II-1254-94, Agenda For The Annual Meeting In Beijing, China 4 To 10 September, 1994, Kotecki, D.J.II-1255-94, Beijing Annual Assembly, 5 To 9 September, 1994, Anon.II-1256-95, Agenda For The Annual Meeting In Stockholm, Sweden 12 To 16 June, 1995, Anon.II-1257-95, Annual Report For 1994-1995, Anon.II-1258-95, List Of Sub-Commission Members, Surian, E.II-1259-95, List Of Documents Issued Since The 1994 Annual Assembly, Anon.II-1260-95, Sub-Commission II-A: The Metallurgy Of Weld Metal. Working Programme For The Year 1995/1996, Anon.II-1261-95, Ordinary And Moisture Resistant Electrodes Round Robin Test: Final Report, Surian, E. and Corvalan, P.II-1262-95, Effect Of The Variation Of The Slag Basicity Of An AWS A5.1-91 E6013 Type Electrode, de Rissone, N.M.R., Corvalan, P. and Surian, E.II-1263-95, Studies Of AWS E6013 Rutile Electrodes. Part 1: Effects Of Calcium Carbonate, Boniszewski, T., Evans, G.M. and Hart, P.H.M.II-1264-95, Microstructure And Properties Of Ferritic Steel Welds Containing Ti And B, Evans, G.M.II-1265-95, Annual Report Sub-Commission II-C 1994-1995, Anon.II-1266-95, List Of Members Of Sub-Commission II-C, Anon.II-1267-95, List Of Documents: Issued Since The 1994 Annual Assembly In Beijing, Anon.II-1268-95, Working Programme 1995-1996, Anon.II-1269-95, Welding - Determination Of Ferrite Number In Austenitic And Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metal, Anon.II-1270-95, Attempt To Improve ASTM G 48-A Test For Evaluation Of High Alloy Material CPT, Doyen, R. and Potty, A.II-1271-95, Annual Report Of Sub-Commission II E 1994-1995, Daemen, R.II-1272-95, List Of Members Of Sub-Commission II-E, Daemen, R.II-1273-95, List Of Documents Issued By The Sub-Commission Since The Annual Assembly InBeijing - September 1994, Daemen, R.II-1274-95, Draft Working Program For Sub-Commission II E For 1995-1996, Daemen, R.

Page 21

II-1275-95, Fillet Weld Test For Assessing Roof Penetration And Positional Usability For Classification Of Arc Welding Electrodes And Wires, Anon.II-1276-95, Covered Electrodes For Manual Metal Arc Welding Of Carbon And Carbon-Manganese Steels - Classification, Anon.II-1277-95, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Anon.II-1278-95, Standard For The Classification Of Hardsurfacing Electrodes, Anon.II-1279-95, Arc-Welding Electrode Quality Operating System Based On A Statistical Control OfThe Coating Eccentricity, Wornowitsky, I.N. and Semendiaew, B.W.II-1280-95, Annual Report Of Commission II. Stockholm Annual Assembly, 12 To 16 June, 1995, II-1281-96, 1996 Annual Assembly Budapest, Hungary. Wednesday, 4 September, Anon.II-1282-96, Annual Report For 1995-1996, Anon.II-1283-96, Sub-Commission II-A. List Of Members, Anon.II-1284-96, List Of Documents Issued Since The 1995 Annual Assembly, Anon.II-1285-96, Working Programme For The Year 1996/1997, Anon.II-1286-96, Standard Method For Determination Of Moisture Resistance Of Manual Metal Arc Welding Consumables, Anon.II-1287-96, Summary Of Work With Improved Properties Of Rutile Electrode Deposits, Boniszewski, T.II-1288-96, Effect Of Nitrogen On C-Mn Steel Welds Containing Titanium And Boron, Evans, G.M.II-1289-96, Hydrogen Content Of Single And Multi-Run Steel Welds, Hart, P.H.M. and Evans, G.M.II-1290-96, Annual Report. Sub-Commission II-C 1995/1996, Anon.II-1291-96, List Of Members Of Sub-Commission II-C, Anon.II-1292-96, List Of Documents, Anon.II-1293-96, Working Programme 1996-1997, Anon.II-1294-96, Progress Report- Round Robin Of Feritscope Calibration By Secondary Standards,Kotecki, D.J.II-1295-96, A Comparison Of Predicted And Measured Ferrite Levels In Duplex And Super Duplex Weld Metal, Zhang, Z., Marshall, A.W. and Farrar, J.C.M.II-1296-96, Identification And Description Of Hot Crack Types, Wilken, K. and Bauer, S.II-1297-96, Revision Of ISO 6847 - Deposition Of A Weld Metal Pad For Chemical Analysis -, Anon.II-1298-96, Annual Report Of Sub-Commission II-E 1995-1996, Daemen, R.II-1299-96, List Of Members Of Sub-Commission II-E, Daemen, R.II-1300-96, List Of Documents Issued By Sub-Commission Since The Annual Assembly In Stockholm, June 1995, Daemen, R.II-1301-96, Draft Working Program Of Sub-Commission II E For1996-1997, Daemen, R.II-1302-96, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Anon.II-1303-96, A Classification System For Hardfacing Alloys, Anon.II-1304-96, Report Of ISO TC44 Meetings Of 25 To 27 June, 1996, II-1306-96, Annual report Of IIW Commission II. Budapest Annual Assembly, 2 To 6 September 1996, Kotecki, D.J.II-1307-97, IIW Commission II - 1997 Annual Assembly. San Francisco, California, USA,

Page 22

Kotecki, D.J.II-1308-97, Annual Report Of II-A: 1996-1997, Astrom, H.II-1309-97, Subcommission II-A: The Metallurgy Of Weld Metal. List Of Members, Anon.II-1310-97, List Of Documents For Com II-A, Anon.II-1311-97, Welding - Standard Method For Determination Of Moisture Resistance Of ShieldedMetal Arc Welding Consumables, Pargeter, R.J.II-1312-97, Effect Of Aluminum And Nitrogen Of Ti-B Containing Steel Welds, Evans, G.M.II-1313-97, Chemical Composition And Hardness Control By Endothermic Reactions In The Coating Of Covered Electrodes, Bracarense, A.Q. and Liu, S.II-1314-97, Working Programme For Subcommission II-A- Metallurgy Of Weld Metal 1997-1998, Anon.II-1315-97, Annual Report. Subcommission II-C 1996/1997, Anon.II-1317-97, Subcommission II-C List Of Documents: Issued Since The 1996 Annual Assembly In Budapest, Anon.II-1318-97, FN Measurement Round Robin Using Shop And Field Instruments After Calibration By Secondary Standards - Summary Report, Kotecki, D.J.II-1320-97, Welding Consumables-Deposition Of A Weld Metal Pad For Chemical Analysis, Kotecki, D.J.II-1321-97, IIW Subcommission II-C Working Programme 1997-1998, Anon.II-1322-97, Annual Report Of Sub-Commission II-E 1996-1997, Roberts, L.II-1323-97, List Of Members Of Sub-Commission II-E (After The Annual Assembly In Budapest, June, 1996), Anon.II-1324-97, List Of Documents Issued By The Sub-Commission Since The Annual Assembly InBudapest, June, 1996, Roberts, L.II-1325-97, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Kotecki, D.J.II-1326-97, A Classification System For Hardfacing Alloys, Anon.II-1327-97, IIW Commission II Working Program Relating To Standards, Kotecki, D.J.II-1328-97, Draft Working Program Of Sub-Commission II-E For 1997-98, Roberts, L.II-1329-97, Welding Consumable Development For A Cryogenic (4 K) Application, Kane, S.F. and Farland, A.L.II-1330-97, Annual Report - IIW Commission II. Annual Assembly Meetings - San Francisco, 16 To 18 July, 1997, Kotecki, D.J.II-1331-97, Agenda For The IIW Commission II - 1998 Annual Assembly, Hamburg, Germany, Anon.II-1332-98, ANNUAL REPORT Of Subcommission II-A 1998, Astrom, H.II-1333-98, Subcommission II-A: The Metallurgy Of Weld Metal, List Of Members, Anon.II-1334-98, List Of Documents For Subcommission II-A., Anon.II-1335-98, Technology And Metallurgy Methods For Decreasing Diffusible Hydrogen Content, Pokhodnya, I.K., Paltsevich, A.P., Golovko, V.V. and Koteltchouck, A.S.II-1336-98, RUTILE ELECTRODES: New Studies Of A Neglected Topic, Surian, E. and Ramini de Rissone, N.M.II-1337-98, Interpass Temperature And The Welding Of Strong Steels, Lord, M.II-1338-98, Effect Of Repeated Repair Welding Techniques On Mechanical Properties And Microstructure Of High Strength Structural Steel, Sadek, A.A., Hussein, A.A., Zaghloul, M.B. and Goda, M.A.II-1339-98, The Influence Of Welding Direction On Analysis And Mechanical Properties For

Page 23

7016 And 7018 Electrodes, Elvander, J.II-1340-98, Welding Consumables For P(T)-91 Creep Resisting Steels, Farrar, J.C.M., Zhang, Z. and Marshall, A.W.II-1341-98, Working Programme Of Subcommission II-A, Anon.II-1342-98, Annual Report Of Subcommission II-C 1997/1998, AnonII-1343-98, List Of Members Of Subcommission II-C. Revision Of June 1998, II-1344-98, Subcommission II-C, List Of Documents: Issued Since The 1997 Annual AssemblyIn San Francisco, Anon.II-1345-98, FN Measurement Round Robin Using Shop and Field Instruments After CalibrationBy Secondary Standards - Final Summary Report, Kotecki, D.J.II-1346-98, Stainless Steel FN Secondary Standards: Gage Calibration And Assignment Of Values, McCowan, C.N., Siewert, T.A. and Vigliotti, D.P.II-1347-98, Reproducability Of Ferrite (FN) Measurements Carried Out On Real Weldments, Farrar, J.C.M.II-1348-98, A Quasi Martensite Line On The WRC-1992 Diagram, Kotecki, D.J.II-1349-98, Subcommission II-C Working Programme 1998-1999, Anon.II-1350-98, Annual Report Of Sub-Commission II-E 1997-1998, Roberts, L.II-1351-98, List Of Members Of Sub-Commission II-E, Anon.II-1352-98, List Of Documents Issued By The Sub-Commission (For Annual Assembly In Hamburg, 1998.09.16), Roberts, L.II-1353-98, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Nickel And Nickel Alloys - Classification, Anon.II-1354-98, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With Or Without A Gas Shield Of Non Alloy And Fine Grain Steels - Classification (Draft 3 Rev.1), Anon.II-1355-98, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification (Draft 3), Anon.II-1356-98, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless Steels - Classification. Specification For Stainless Steel Covered Electrodes Cohabitation Draft 1, Anon.II-1357-98, Welding Consumables - Wire Electrodes, Wires And Rods For Arc Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-1358-98, Welding And Allied Processes - Flux And Gas Shielded Electrical Welding Processes - Procurement Guidelines For Welding Consumables, Anon.II-1359-98, Draft Working Program Of SC II-E For 1998-99, Roberts, L.II-1360-98, Annual Report - IIW Commission II. 1998 Annual Assembly - Hamburg Germany, Kotecki, D.J.II-1362-99, Annual Report Of Sub-Commission II-A 1999, Astrom, H.II-1363-99, Sub-Commission II-A. List Of Members, Anon.II-1364-99, List Of Documents For Sub-Commission II-A, Anon.II-1365-99, Report Of Voting/Annex B, Anon.II-1366-99, Welding And Allied Processes - Determination Of Hydrogen Content In Ferritic Steel Arc Weld Metal, Anon.II-1367-99, Report Of Voting/Annex B, Anon.II-1368-99, Welding Consumables - Standard Method For Determination Determination Of Moisture Resistance Of Shielded Manual Metal Arc Welding Consumables Electrodes By

Page 24

Measurement Of Diffusible Hydrogen, Anon.II-1369-99, All-Weld Metal Design For AWS E10018M, E11018M And E12018M Type Electrodes, Surian, E.S. and de Vedia, L.A.II-1374-99, For Carrying Out Ferrite (FN) Measurements On A Series Of Real Weldments, Anon.II-1381-99, Report Of Voting/Annex B, Anon.II-1382-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification. Draft 3, Anon.II-1383-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Nickel And Nickel Alloys - Classification, Anon.II-1384-99, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With Or Without A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-1385-99, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-1386-99, Working Program Of Sub-Commission II-A, AnonII-1389-99, Welding Consumables - Wire Electrodes, Wires And Rods For Arc Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-1392-99, Annual Report - IIW Commission II. July 1999 Annual Assembly - Lisbon, Portugal, Kotecki, D.J.II-1393-99, Cohabitation Approach In ISO Welding Consumables Standards, Anon.II-1394-00, Annual Report Of Sub-Commission II-A 2000, Astrom, H.II-1396-00, List Of Documents For Sub-Commission II-A, Anon.II-1397-00, Welding And Allied Processes - Determination Of Hydrogen Content In Ferritic Steel And Weld Metal, Anon.II-1399-00, Effect Of W, Nb and V Alloy Elements On Creep Strength Of Low Carbon 1 1/4Cr-1/2Mo Weld Metal, Lundin, C.D. and Liu, P.II-1400-00, SMAW Electrodes For Extra High Strength Steel - Have We Reached The Strength Limit For Conventional CrNiMo Types?, Anon.II-1401-00, Working Program Of Sub-Commission II-A, Anon.II-1405-00, Progress Report - Ferrite Round Robin, Anon.II-1408-00, Comparison Of Weld Hot Cracking Tests. Summary Of An IIW Round Robin Study, Finton, T.L. and Lippold, J.C.II-1409-00, Development Of Calculation Method Of Heavy Coating Composition Of Stainless Synthetic Electrodes, Mazel, J.A., Kouskov, J.V., Polichtchouk, G.N.II-1414-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Non Alloy And Fine Grain Steels - Classification, Anon.II-1415-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification, Anon.II-1416-00, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With Or Without A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-1417-00, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-1418-00, Report Of The Meeting Of 2000-01-24/25 In Paris, Kotecki, D.J.II-1420-00, Hydrogen Determination And Mechanical Characterisations Of 2,25Cr 1Mo And 2,25Cr 1Mo 0,25V Welding Material For Petrochemical Application, After Different Heat Treatments: Dehydrogenation Heat Treatment (DHT), Intermediate Stress Relieving (ISR) AndFinal Post Weld Heat Treatment (PWHT), Bertoni, A.

Page 25

II-1421-00, Annual Report OF IIW Commission II, Kotecki, D.J.II-1994-92, List Of Documents Issued By Sub-Commission Since The Annual Assembly Of The Hague-July 1991, Daemen, R.II-265-63, On The Microcracks In The Weldmetal And Hydrogen Contents In The Heat affected zone, Oishi, M. and Ohwa, T.II-351-65, Investigation Related To Hard-Zone Cracking, Annon.II-468-68, Tentative Procedure For The Determination Of Hydrogen In Mild And Low-Alloy Steel Weld Metal, Anon.II-498-69, Some Considerations About The Cruciform Test, Inagaki, M., Nakamura, H., Matsumoto, H., Satoh, K. and Matsui, S.II-602-71, The Determination Of Hydrogen In Mild And Low alloy Steel Weld Metals, Anon.II-612-72, Influence Of Niobium On The Microstructure And Mechanical Properties Of Submerged Arc Weld Metals For CMn Steels, Hannerz, N., Valland, G. and Easterling, K.II-614-72, Crack And Hydrogen In Submerged Arc Welding Of HT - 80 Steel, Tsuboi, J. and Terashima, H.II-657-73, Notch Toughness Of Weld Metal For C-Mn-Nb Steel, Ito, Y., Ikeda, M., Nakanishi, M. and Michishita, A.II-704-74, Recommended Method Of Testing For The Assessment Of The Microfissuring Tendency Of Mild And Low Alloy Steel Weld Metal Deposited By Manual Arc Welding CoveredElectrodes, Annon.II-726-74, Diffusible Hydrogen Content Of Welds Deposited By The Seamless Flux-Cored Wire Co2 Process, Evans, G.M. and Baach, H.II-740-75, Recommended Standard Method For Determination Of The Ferrite Number In WeldMetal Deposited By Cr-Ni Stainless Electrodes, Anon.II-742-75, High Temperature Mechanical Properties Of All Weld Metals And Joints Made Of Some Welding Electrodes For 32 Ni 20 Cr Alloy, Himura, J.II-746-75, Development Of A Covered Electrode For Steel Structures In Low Temperature Service, Morigaki, O., Tanigaki, T., Kuwabara, M., Fujibayashi, K. and Otawa, M.II-752-75, Report Of The Collaborative Program On Hot Cracking Tests, Van Lent, P.H. and Masetti, F.II-756-75, International Standard For The Classification Of Electrodes For Welding Of Mild And Medium Tensile Steels, Anon.II-760-75, Methods Of Reporting Weld Metal Hydrogen Contents, Anon.II-761-75, Hydrogen Diffusion In Welding. An Assessment Of Current Knowledge, Coe, F.R.II-762-75, Weld Metal Cracking, Anon.II-76-59, Soudage A L'arc Avec Electrodes Enrobees A Forte Penetration, Anon.II-766-75, Symboles Et Pictogrammes Utilisables Sur Les Materiels De Soudage A L'Arc, Anon.II-782-76, A Numerical Analysis Of The Diffusion And Trapping Of Hydrogen In Steels And Steel Weldments, Kohira, K., Yatake, T. and Yurioka, N.II-783-76, Factors Affecting The Amount Of Fumes Generated By Manual Metal Arc Welding, Kobayshi, M., Maki, S. and Ohe, I.II-784-76, Improvement Of Lay Down Welded Method And Its Application To Actual Shipbuilding, Kikuta, Y., Onoe, H., Kurihara, Y. and Miyao, N.II-788-76, Covered Electrodes For Manual Arc Welding Of Mild Steel And Low Alloy Steel. Testing Of Mechanical Properties And Classification, Anon.II-792-76, Recommended Methods Of Reporting Weld Metal Hydrogen Contents, Anon.

Page 26

II-793-76, Note D'Information Sur La Reunion De L'ISO/TC 44/SC 4 Material De Soudage A L'Arc Tenue A Francfort Les 4 Et 5 Novembre 1975, Gaubert, A.II-815-77, A Study Of Hydrogen In Fused Fluxes, Godai, T., Sugiyama, T., Sugino, M. and Kondo, M.II-816-77, Industrial Health Aspects On The Arc Welding By Austenitic Filler Metals, Homma, K., Yamaguchi, H., Yagami, T., Sano, H. and Araki, Y.II-817-77, Effect Of Hydrogen On Blowhole Formation In Pure Iron During Solidification, Masahio. Takehiro. and Satoru.II-820-77, Critical Fume Concentration, Anon.II-824-77, Code Of Symbols For Covered Electrodes For Manual Metal-Arc Welding Of Cast Iron, Anon.II-825-77, International Standard For Covered Electrodes For Manual Arc Welding Of High Tensile Steels For Low Temperature Applications, Anon.II-826-77, Fume Classification Of Coated Electrodes For Manual Welding, Anon.II-865-78, Development Of Fume Controlled Electrodes, Kobayashi, M., Sakai, Y. and Hayashi, K.II-866-78, Study On Metallurgical Factors And Toughness In Structural Steel Welds, Kikuta, Y., Araki, T., Ohkubo, A., Yoneda, M. and Tsuji, H.II-868-78, Improvement Measures For Industrial Health In Arc Welding Of Special Alloys, Homma, K., Yamaguchi, H., Yagami, T., Ohba, M., Sano, H. and Araki, Y.II-869-78, An Examination Of Collecting Mediums For Determination Of Diffusible Hydrogen InWelded Metal, Uda, M. and Ohno, S.II-870-78, Problems Of Porosity Prevention Under The Conditions Of A High Gas Saturation Of The Welding Pool, Kakovsky, N.I., Zakharov, L.S., and Lipodaev, V.N.II-871-78, Study On The Measurement Of Diffusible Hydrogen Content In Submerged Arc Welds In Japan, Anon.II-876-78, Cryogenic Toughness Of SMA 308 And Weld Metals, Anon.II-896-79, Spattering Phenomenon For Iron-Nitrogen System During Arc Melting, Anon.II-897-79, A Study On Hot Ductility Of Simulated Weld Metals, Homma, H., Mori, N. and Asano, K.II-898-79, The Determination Of The Hydrogen Content Of Weld Metal, Anon.II-899-79, The Quantification Of Weld Metal Microstructures, Anon.II-900-79, Draft Welding Procedures For The Classification Of Mild Steel Coated Electrodes, Anon.II-901-79, Determination Of Diffusible Hydrogen In Welded Joints By Vacuum Method WithoutMercury, Petrov, G.L. and Levchenko, A.M.II-902-79, Test Results For Susceptibility Of Austenitic Stainless Steel Weld Metal To Intergranular Corrosion, Anon.II-903-79, Problems Poses Par L'Emission Des Fumees Au Cours Du Soudage A L'Arc Avec Electrodes Enrobees, Reidinger, U. and Beaufils, D.II-904-79, Recommended Standard Method For The Determination Of The Ferrite Number In Austenitic Weld Metal Deposited By Cr-Ni Steel Electrodes, Anon.II-922-80, List Of Documents Issued During The Working Year 1979/80, Anon.II-923-80, Studies Of The Possibilities Of Classifying Welding Electrodes According To Fume Generation, Magnusson, E.J. and Rosendahl, C.H.II-924-80, The Determination Of The Hydrogen Content Of Ferritic Arc Weld Metal, Anon.II-925-80, Effects Of Hydrogen And Nitrogen On Blowhole Formation In Pure Nickel At Arc

Page 27

Welding And Non-Arc Welding, Ohnu, S. and Uda, M.II-926-80, Study On Hydrogen Embrittlement Of Nickel-Based Weld Metal, Fujimoto, R., Miyake, T., Ogata, M. and Takino, T.II-929-80, Prediction Of Diffusible Hydrogen Content In Deposited Metals With Basic Type Covered Electrodes, Hirai, Y., Minakawa, S. and Tsuboi, J.II-931-80, Procedures Used To Prepare Secondary Standards For Delta-Ferrite In Austenitic Stainless Steel Weld Metal, Robinson, J.L., Rabensteiner, G. and Neff, F.II-932-80, Preparation Of Secondary Weld Metal Ferrite Standards: Results Of Round Robin Test Programm, Gooch, T.G.II-933-80, Transformation Behavior Of Carbon-Manganese Weld Metal An International Study,Christensen, N.II-934-80, Some Correlations Between Charpy V And Cod Test Data For Ferritic Weld Metals, Dolby, R.E.II-935-80, The State-Of The-Art In Crack Tip Opening Displacement (CTOD) Testing And Analysis, Harrison, J.D.II-956-81, Studies Concerning The Fume Classification Of Converted Electrodes, Anon.II-957-81, Factors Affecting The Microstructure And Properties Of C-Mn All-Weld-Metal Deposits, Evans, G.M.II-959-81, The Determination Of The Hydrogen Content Of Ferritic Arc Weld Metal, Anon.II-960-81, Mechanized Welding Of Cast Irons With Flaky And Nodular Graphites, Anon.II-964-81, Recommended Standard Method For The Determination Of Ferrite Number In Austenitic Weld Metal Deposited By Cr-Ni Steel Electrodes, Anon.II-978-82, Evaluation Of Some Available Standard Methods For The Determination Of Diffusible Hydrogen In Weld Metal, Natal, V.D. and Silva, L.C.II-980-82, Characteristics Of Mechanical Properties Of Ti-B Bearing Weld Metals, Mori, N., Homma, H., Wakabayashi, M. and Okita, S.II-981-82, Japanese Comments On COD Test, Anon.II-982-82, Determination Of Hydrogen Levels In Stainless Steel And Nickel Base Alloy Welds And Claddings, Faure, F., Roux, F., Robinson, J.L., Bourges, B. and Vialatte, B.II-983-82, The Effect Of Carbon On The Microstructure And Properties Of C-Mn All-Weld Metal Deposits, Evans, G.M.II-984-82, About The Role Of Metallic And Slag Phases As The Sources Of Entering Of Manganese And Iron Into Welding Aerosol, Pokhodnya, I.K., Yavdoshchin, I.R., Bulat, A.V., Shvachko, V.I.II-A-042-99, Effect Of W, Nb And V Alloy Elements On Creep Strength Of Low Carbon 1 1/4Cr-1/2Mo Weld Metal, Lundin, C.D. and Liu, P.II-A-043-99, All-Weld Metal Design For AWS E10018M, E11018M And E12018M Type Electrodes, Surian, E.S. and de Vedia, L.A.II-A-046-99, IW Sub-Commission II-A - Thursday, 22 April, 1999 (Minutes), Anon.II-A-048-99, Annual Report Of Sub-Commission II-A 1999, Astrom, H.II-A-049-99, Sub-Commission II-A. List Of Members, Anon.II-A-050-99, List Of Documents For Sub-Commission II-A, Anon.II-A-052-99, Effect Of Chromium On The Mechanical Properties Of Mn-Mo Weld Metal Deposits, Jorge, J.C.F., Souza, L.F.G., Rebello, J.M.A. and Evans, G.M.II-A-053-99, Characterisation Of Inclusions Found In C-Mn Steel Welds Containing Titanium, Blais, C., L'Espérance, G. and Evans, G.M.II-A-054-99, Effects Of Welding Parameters And Electrode Atmospheric Exposure On The

Page 28

Diffusible Hydrogen Content Of Gas Shielded Flux Cored Arc Welds, Harwig, D.D., Longenecker, D.P. and Cruz, J.H.II-A-055-99, SMAW Electrodes For Extra High Strength Steel - Have We Reached The Strength Limit For Conventional CrNiMo Types?, Astrom, H.II-A-056-99, Agenda For The Meeting In The Hague, Friday 12, 1999, 9.00 a.m., II-A-057-99, Sub-Commission II-A - Friday, 12 November, 1999, II-A-059-00, An Analytical Transmission Electron Microscope Study Of Inclusions In C-Mn Steel Weld Metals, Menon, E.S.K., Saunders, M., Walters, J., Fox, A.G. and Evans, G.M.II-A-060-00, Susceptibility Of Low Alloy Steel Weld Metal To Stress-Relief Embrittlement, Mandziej, S.T.II-A-061-00, Annual Assembly Of International Institute Of Welding, Bertoni, A.II-A-062-00, Effect Of Atmospheric Condition On Weld Metal Diffusible Hydrogen Content Of Gas Shielded Cored Wires, van der Mee, V.II-A-063-00, Preface To The Special Issue On Application Of Neural Network Analysis In Materials Science- Fujii, H. and Harshad, K.D.H., II-A-064-00, List Of Documents For Sub-Commission II-A, Anon.II-A-065-00, IIW Sub-Commission II-A - Tuesday, 28 March 2000, Astrom, H.II-A-066-00, Annual Report Of Sub-Commission II-A 2000, Astrom, H.II-A-067-00, Sub-Commission II-A. List Of Members, Anon.II-A-068-00, Working Program Of Sub-Commission II-A, Anon.II-A-069-00, Working Program Of Sub-Commission II-A, Anon.II-A-071-00, The Welding Of Structural Steels Without Preheat, Kinsey, A.J.II-A-073-00, Weld Metal For P91 - Tough Enough?, Zhang, Z., Farrar, J.C.M. and Barnes, A.M.II-A-077-00, Sub-Commission II-A - Tuesday, 7 November 2000, Anon.II-A-106-63, Non-Metallic Inclusions In Weld Metal, Gloor, K., Christensen, N., Meehle, G. andSimonsen, T.II-A-109-63, On The Microcracks In The Weldmetal And Hydrogen Contents In The Heat Affected Zone, Oishi, M. and Ohwa, T.II-A-10-97, Annual Report Of II-A:1996-1997, Astrom, H.II-A-112-63, Some Metallurgical Investigations On The Causes Of Fisheye Formation, Ando, S. and Mori, S.II-A-11-97, List Of Documents For Com II-A, Anon.II-A-128-64, Hydrogen Absorption In Austenitic Weld Metal, Valland, G. and Christensen, N.II-A-129-64, Activities Of The IIW In The Field Gases In Metals, Christensen, N.II-A-12-97, Working Programme For Subcommission II-A- Metallurgy Of Weld Metal 1997-1998, Anon.II-A-132-64, Comparative Microfissure Tests On Single And Multi Runs And Diffusible Hydrogen Determination, Anon.II-A-133-64, Minutes Of The Meeting In Zurich, 8th April, 1964, Christensen, N.II-A-138-64, The Distribution And Evolution Of Hydrogen In Mild Steel Weldments, Evans, G.M.II-A-139-64, Hard-Zone Cracking Of 1% Cr-0.2% Mo Steel-Effects Of Hydrogen And Weld Metal Compositions, Evans, G.M.II-A-166-66, Results Of Testing For The Assessment Of Micro-Fissures, Anon.II-A-171-66, Contribution Pour L'Etablissement D'une Methods De Determination Des TeneursEn Hydrogene Dans Le Metal De Soudure Obtenu Par Electrode Enrobee, Chagniot, J. and

Page 29

Dauvergne.II-A-177-66, Draft Specifications For The Determination Of Hydrogen In Mild And Low Alloy Steel Weld Metal, Anon.II-A-17-97, Subcommission II A Minutes From The Intermediate Meeting Held In Maastricht Oct.16, 1997, Astrom, H.II-A-189-66, Transformation And Reactions In The Heat Affected Zone During The Welding And Oxygen Cutting Of Steel, Ruge, J.II-A-18-98, Draft Agenda For The Meeting In Gothenburg, Sweden, 26 May 1998, 9.00 a.m., Anon.II-A-1-97, Subcommission II-A: The Metallurgy Of Weld Metal. List Of Members, Anon.II-A-19-98, Rutile Electrodes: New Studies Of A Neglected Topic, Surian, E. and Ramini de Rissone, N.M.II-A-20-98, Interpass Temperature And The Welding Of Strong Steels, Lord, M.II-A-21-98, Final Report. Phase 1B: Fusion Zone Solidification And Heat-Affected Zone Reheat Cracking In Type 347 Stainless Steel., Messler, W.II-A-22-98, Metrode Technical Note Based On: Hydrogen In Duplex Stainless Steel Welds, Kacar, R.II-A-23-98, Toughness Of Weld Metal By MAG Welding Flux-Cored Wire For Low Temperature Service Steel, Suga, T., Ikemoto, K., Konishi, M., Kurokawa, T. and Hosoi, K.II-A-24-98, A Comparison Of Type 316 Stainless Steel Weld Metal Deposited From 'Matching Core Wire' And Synthetic Electrodes, Waud, J.R.II-A-25-98, Toxicity Characteristic Leaching Procedure, Anon.II-A-266-70, Hydrogen In Weld Metal, Anon.II-A-274-70, Implant Testing Effect Of Steel Composition And Hydrogen Level, Evans, G.M. and Christensen, N.II-A-27-98, A Study Of The Welding Parameters Influencing The Diffusible Hydrogen Content From A FCAW OF The Type AWS A5.29 E80T1-K2, Astrom, H. and Stridh, L.E.II-A-287-71, Test Program To Establish The Influence Of The Arc Length Of The Formation OfFissures And Of Micro-Fissures In The Weld Deposit Of R And RR Coated Welding Electrodes, Anon.II-A-289-71, Comparison Of IIW and JIS Methods For Hydrogen Analysis, Anon.II-A-28-98, Results From Testing 1366 Rutile Electrode, Part Three, Elvander, J.II-A-297-71, Formulation Of A Basic Flux Coating For An Experimental 2CrMo Electrode, Boniszewski, T.II-A-298-71, Notch Toughness Of Commercial Submerged-Arc Weld Metal, Tuliani, S.S., Boniszewski, T. and Eaton, N.F.II-A-299-71, Weld Metal Cracking, Anon.II-A-300-71, The Summarized Results Of The Joint Program To Establish The Influence Of The Arc Length On The Formation Of Fissures And Micro-Fissures In The Weld Deposit Of R And RR Coated Welding Electrodes, Schmidt, P.II-A-301-71, Electron Microscopic And Magnetic Examinations On The Formation Of CleavageCracks After Electrolytic Charging Of Low-Carbon Iron With Hydrogen, Hieber, H. and Erdmann-Jesniterzer, F.II-A-30-98, The Influence Of Welding Direction On Analysis And Mechanical Properties For 7016 And 7018 Electrodes, Elvander, J.II-A-31-98, Effect Of Repeated Repair Welding Techniques On Mechanical Properties And Microstructure Of High Strength Structural Steel, Sadek, A.A., Hussein, A.A., Zaghloul, M.B.

Page 30

and Goda, M.A.II-A-32-98, Subcommission II A : The Metallurgy Of Weld Metal. Minutes from The Meeting Held In Gothenburg May 26, 1998, Astrom, H.II-A-35-98, ANNUAL REPORT Of Subcommission II-A 1998, Astrom, H.II-A-36-98, Subcommission II-A: The Metallurgy Of Weld Metal, List Of Members, Anon.II-A-37-98, List Of Documents For Subcommission II-A., Anon.II-A-389-76, A Technique For The Characterization Of Weld Metal Microstructures, Davey, T.G. and Widgery, D.J.II-A-38-98, Working Program Of Sub-Commission II-A, AnonII-A-40-99, Hydrogen Content Of Austenitic Weld Metal, Ornig, H. and Rauch, R.II-A-41-99, Inclusion Formation In Low-Alloy Steel Welds, Babu, S.S., David, S.A. and DebRoy, T.II-A-443-78, The Determination Of Hydrogen In Weld Metal Deposited By The Submerged ArcProcess, Anon.II-A-525-81, Differentiator Analyses Of The Effects Of Mo, Ti, B On Weld Metal Microstructures, Nakanon, S., Tamaki, K. and Tsuboi, J.II-A-546-81, The Effect Of Carbon On The Microstructure And Properties Of C-Mn All-Weld Metal Deposits, Evans, G.M.II-A-583-81, The Effect Of Stress-Relieving On The Microstructure And Properties Of C-Mn All-Weld Metal deposits, Evans, G.M.II-A-605-81, The Effect Of Heat-Treatment On The Microstructure And Properties Of C-Mn All-Weld Metal Deposits, Evans, G.M.II-A-630-84, The Effect Of Silicon On The Microstructure And Properties Of C-Mn All-Weld Metal Deposit, Evans, G.M.II-A-633-84, Evaluation Of Metallurgical Characteristics Of Welding-Fused Fluxes, Potapov. and Kurlanov.II-A-640-85, The Effects Of Sulphur And Phosphorus On The Microstructure And Properties Of C-Mn All-Weld Metal Deposits, Evans, G.M.II-A-642-85, Oxygen And Its Role In Determining Weld Metal Microstructure And Toughness - A State - Of - The - Art Review, Ahlblom, B.II-A-643-85, Nitrogen And Oxygen In Weld Metal - A State Of The Art Review. First Part: Nitrogen, Gonzalez, J.C.II-A-644-85, Nitrogen And Oxygen In Weld Metal - A State Of The Art Review, Gonzalez, J.C.II-A-649-85, List Of Sub-Commission Members, Evans, G.M.II-A-650-85, List Of Documents, Evans, G.M.II-A-669-86, Criterion For Evaluation Fused Welding Flux Activity, Potapov, N.N. and Kurlanov,S.A.II-A-670-87, Microstructural Development In Mild And Low-Alloy Steel Weld Metals, Grong, O. and Matlock, D.K.II-A-671-87, Effects On Deoxidation Practice On The Transformation Behavior And ToughnessOf Steel Welds, Grong, O., Siewert, T.A. and Edwards, G.R.II-A-673-87, Hydrogen Entrapment In Mild Steel Weld Metal With Micropores, Boniszewski, T. and Moreton, M.A.II-A-692-87, Sample Surface Preparation - Its Effect Upon The Analysis Of Hydrogen Samples, Parker, D.H. and Jenkins, N.II-A-694-87, Stress Rupture Behavior Of Post Weld Heat Treated 2-1/4Cr-1Mo Steel Weld Metal, Lundin, C.D., Kelley, S.C., Menon, R. and Kruse, B.J.

Page 31

II-A-695-87, The Optimum Control Of Deposited Metal Chemical Compositions Of Basic Electrodes For Low-Alloy High Strength Steels, Yu-min, Z., Bing-fan, Z., Yue-Jain, Z., Wu-Shen, Ly., Shu-Hua, Qi. and Yu-Hai, Z.II-A-696-87, Surfacing Alloys Resisting To Abrasive Wear And Shock Loads, Grinberg, N.A.II-A-699-87, The Kinetics Of Moisture Pick-Up In Coated Electrodes And Submerged-Arc Fluxes, Million, A. and Weyland, F.II-A-700-87, Hydrogen And Its Control In Weld Metal, McKeown, D.II-A-701-87, The Effect Of Carbon On The Microstructure And Mechanical Properties Of The Austenitic Stainless All Weld Metal Type E 307, Trotti, J.L., Morgenfeld, J. and Surian, E.II-A-702-87, The Effect Of Manganese And Molybdenum On The Microstructure And Mechanical Properties Of Austenitic Stainless All Weld Metal, Morgenfeld, J., Surian, E. and Trotti, J.L.II-A-704-87, Minutes Of The Meeting Held In Madrid, 1st April 1987, Evans, G.M.II-A-710-87, Moisture, Drying, Etc. Of MMA Electrodes For Ferritic Steels, Anon.II-A-711-87, The Determination Of Hygroscopic Properties Of Welding Consumables. Moisture Pick-Up And Moisture Resistance, Million, A. and Weyland, F.II-A-712-87, Inclusion Phases And The Nucleation Of Acicular Ferrite In Submerged Arc Welds In High Strength Low Alloy Steels, Dowling, J.M., Corbett, J.M. and Kerr, H.W.II-A-713-87, Deposit Properties Of The Ti-O-B-N Balance In Submerged Arc Welding, Liu, Z., Lau, T. and North, T.H.II-A-714-87, Development Of Welding Materials For Low Temperature Service, Horii, Y., Ohkita, S., Wakabayashi, M. and Namura, M.II-A-715-87, Effect Of Manganese And Silicon Segregation On Conditions Of Acicular Ferrite Formation In Weld Structure, Pokhodnya, I.K., Korsun, A.O., Golovko, V.V. and Meshkov, Yu, YaII-A-716-87, Application Of Structural Criteria For Evaluating The Low-Temperature BrittlenessOf Weld Metal, Pokhodnya, I.K., Korsun, A.O., Meshkov, Yu, Ya. and Pokharenko, G.A.II-A-717-87, Temper Embrittlement Of 2.25Cr-1Mo Steel Weld Metal. A Literature Survey, Mejias, H.D. and De Vedia, L.A.II-A-718-87, Arc Stability For Different Coating Composition Of Basic Low Hydrogen Electrodes, Farias, J.P., Scotti, A., Raiter, V.E. and Timerman, R.II-A-719-87, A Pattern To Explain Arc Behavior Under Different Coating Compositions, Scotti, A., Quites, A.M., Kobayashi, Y. and Farias, J.P.II-A-723-87, Literature Review - Nitrogen In Stainless Steel Weld Metal, Menon, R. and D.J. Kotecki.II-A-724-87, Influence Of Mn Content On Mechanical Properties And Microstructure Of A High Strength M.M.A Electrode Weld Metal, Surian, E., Trotti, J., Casanelli, A.N. and De Vedia, L.A.II-A-727-87, The Pre-Calculation Of Saw Weld Metal Dilution, Valadares, S.R., Drumond, M.D.F.B., Modenesi, P.J. and Marques P.V.II-A-728-87, Minutes Of The Meeting Held In Rio De Janerio, 10th November 1987., Evans, G.M.II-A-729-87, Influence Of Molybdenum On The Microstructure And Properties Of Weld Metal With Different Manganese Contents, Raiter, V. and Gonzalez, J.C.II-A-730-87, Microstructure Of Duplex Stainless Weld Metals, Svensson, L-E. and Gretoft, B.II-A-731-87, Properties-Microstructure Relationship For Duplex Stainless Steel Weld Metals, Svensson, L-E, and Gretoft, B.II-A-732-87, Small Particles In Weld Metals - A Review, Abson, D.J.

Page 32

II-A-733-88, The Influence Of Current Supply Type And Arc Length Of C-Mn, C-Mn-Ni And C-Mn-Ti-B Shielded Metal Arc Deposit Nitrogen And Oxygen Contents, Abson, D.J.II-A-734-88, Effect Of Manganese And The Type Of Current On The Properties And Microstructure Of All-Weld-Metal Deposited From E7016-1 Electrodes, Surian, E. and Boniszewski.II-A-736-88, The Influence Of Pipe Plate And Consumable Chemistry On The Composition, Microstructure And Toughness Of Submerged Arc, Seam Weld Metal, Thewlis, G.II-A-737-88, Structure-Property Correlation Of Submerged-Arc And Gas-Metal-Arc WeldmentsIn HY-100 Steel, Deb, P., Challenger, K.D. and Therrien, A.E.II-A-738-88, Microstructure And Phase Transformations In Duplex 316 Manual Metal Arc WeldMetals: The Role Of Carbon, Farrar, R.A.II-A-739-88, The Effect Of Chromium On The Microstructure And Properties Of C-Mn All-WeldMetal Deposits, Evans, G.M.II-A-740-88, Draft Agenda. For The Meeting In Cambridge, 14th March 1988, Evans, G.M.II-A-741-88, Minutes Of The Meeting Held In Cambridge, 14th, March 1988, Evans, G.M.II-A-742-88, Annual Report For 1987/1988, Evans, G.M.II-A-743-88, List Of Sub-Commission Members, Evans, G.M.II-A-744-88, List Of Documents Issued In 1987/88, Evans, G.M.II-A-746-88, Working Program For The Year 1988/89, Evans, G.M.II-A-748-88, Fundamentals Of Maintenance And Conditioning Of Coated Electrodes, Anon.II-A-749-88, The Method For The Analysis Of Diffusion Hydrogen And Influence Of Welding Conditions On Its Content In Weld Metal, Paltsevich, A.P.II-A-750-88, Nitrogen Absorption From Welding Arcs, Allum, C.J.II-A-751-88, Investigation Into Chemical Heterogeneity Of Weld Metal Alloyed With Nickel Manganese, Pokhodnya, I.K., Voitkevich, V.G., Denisenko, A.V. and Evans, G.M.II-A-752-88, Phosphorus Effect On Structure And Properties Of Weld Metal In Welding Low-Alloy Steels, Alexeyev, A.A., Yavdoshchin, I.R., Voitkevich, V.G. and Morozov, Yu.D.II-A-753-88, Effect Of Acicular Ferrite (AF) Structure On Micromechanism Of Weld Metal Brittle Fracture, Pokhodnya, I.K., Korsun, A.O., Denisenko, A.V., Golovko, V.V., Kostin, V.A., Marchenko, A.E., Ustinov, S.D. and Solomiychuk, T.G.II-A-754-88, Method For Predicting The Content Of Diffusible Hydrogen In The Weld Metal Under The Influence Of Atmospheric Moisture, Ruge, J. and Dickehut, G.II-A-755-88, Influence Of Non-Homogeneous Microstructure On The Toughness Of Low-Alloy Steel Weld Metal, Zhiming, Z., Chengwei, C. and Zhonglin, L.II-A-756-88, Fracture Behavior Of C-Mn Steel Multipass MMA Weld Metals At -60(C In CharpyV Testing, Chen, J.H. and Yan, C.II-A-757-88, A Comparative Structural Study Of A Flux-Cored And A Manual-Metal-Arc Weld Deposit, Huseen, L.A. and Hawkins, D.N.II-A-758-89, Nitrogen In Manual Metal Arc Weld Metal. A literature Review., van Nassau, L. and van der Mee, V.II-A-761-88, Oxygen Effect On Low-Alloy Steel Weld Metal Properties, Potapov, N.N.II-A-762-88, Minutes Of The Meeting Held In Paris, 7th December 1988, Evans, G.M.II-A-763-89, A Modern Method For Water Determination In Welding Consumables, Korber, P. and Weyland, F.II-A-764-89, The Effect Of Atmospheric Condition On Weld Metal Diffusible Hydrogen Content,Dickehut, G. and Hotz, U.II-A-765-89, Primary Method For The Determination Of Diffusible Hydrogen In Manual

Page 33

Metal0Arc Ferritic Steel Weld Metal, Anon.II-A-766-89, Guidelines For Handling, Storage, And Rebaking Of Covered Steel Electrodes, Anon.II-A-767-89, Effect Of Copper On C-Mn Weld Metal Microstructure And Toughness, Es-Souni, M, Beaven, M. and Evans, G.M.II-A-768-89, Effects Of Titanium Added To The Coating Of UONI-13/55 Electrodes On The Microstructure And Mechanical Properties Of Weld Metal, Pokhodnya, I.K., Korsun, A.O. and Meshkov, Yu, Ya.II-A-769-89, A Toughness Study Of Steel Weld Metal For Shelf-Shielded Flux-Cored Electrodes-Part 1, Kotecki, D.J. and Moll, R.A.II-A-770-89, A Study Of The Manganese-Oxygen System In Low Hydrogen MMA All-Weld-Metal Deposits, Abson, D.J. and G.M. Evans.II-A-771-89, Nature Of Inclusions In Steel Weld Metals And Their Influence On Formation Of Acicular Ferrite, Mills, A.R., Thewlis, G. and Whiteman, J.A.II-A-772-89, The Effect Of Preheat Temperature On The Microstructure And Toughness Of A C-Mn Weld Metal, Tweed, J.H. and Knott, J.F.II-A-773-89, Effects Of Strain And Strain Aging On Fracture Toughness Of C-Mn Weld Metal, McRobie, D.E. and Knott, J.F.II-A-774-89, Effect Of Artificial Strain Aging On Micro-Structure and Mechanical Properties Of A Single-Bead Ferritic Weld Metal, Hoekstra, S., Munnig Schmit-van der Burg, M.A., Mandziej,S. and Beyer, J.II-A-775-89, Proposal For Modification Of Copper Jig Of Standard ISO/DIS 3690, Joele, R.II-A-777-89, A Study Of A Simple Method To Evaluate The Moisture Resistance Of Manual Metal Arc Welding Electrode, Mataniello, E. and Timerman, R.II-A-778-89, Metallurgy Of Fluxes With Improved Technological Properties For Corrosion Resistant Cladding, Starchenko, E.G. and Volobuev. Yu, S.II-A-779-89, New Method For Humidification Testing Of Manual Electrode, Fink, D.II-A-780-89, Hydrogen Induced Cracking In Austenitic/ Ferritic Duplex Stainless Steel, Fekken,U., van Nassau, L. and Verway, M.II-A-780-90, Draft Agenda. For The Meeting To Be Held In Bratislave, 29th March 1990, Evans, G.M.II-A-781-89, Minutes Of The Meeting Held In Annapolis, 10th April 1989, Evans, G.M.II-A-781-90, Comparison Of Type Of Humidity Cabinet And Moisture Resistance Determination For Manual Metal Arc Welding Electrodes, Anon.II-A-782-89, Annual Report For 1988/1989, Evans, G.M.II-A-784-89, List Of Documents Issued In 1988/89, Evans, G.M.II-A-786-89, Working Program For The Year 1989/90, Evans, G.M.II-A-787-89, Correlation Between Solidification Parameters And Weld Microstructures, David, S.A. and Vitek, J.M.II-A-788-89, The Development Of Microstructure In C-Mn Steel Weld Deposits, Court, S.A. and Pollard, G.II-A-789-89, The Effects f Mn And Si On The Microstructure And Properties Of SMA Steel Weld Metal, Court, S.A. and Pollard, G.II-A-790-89, Effect Of Carbon Content On The Characteristics Of As Welded And Step CooledAWS E-8018B2 Type Weld Metal, Gonzalez, J.C., de Vedia, L.A., Raiter, V. and Hrivnak, I.II-A-791-89, The Effect Of Nickel On The Microstructure And Properties Of C-Mn All-Weld-Metal Deposits, Evans,G.M.

Page 34

II-A-792-89, Effect Of The Use Of Different Types Of Wires On The Microstructure And Mechanical Properties Of Basic Electrode Deposits, Losano, L.G., Raiter, V.E. and Boniszewski, T.II-A-793-89, CO2 Welding Process And Notch Toughness Of Weld Metal, Ondrejcek, P., Pikna, M. and Vins, F.II-A-794-89, Self-Shielded Arc Welding, Boniszewski, T.II-A-795-89, Effect Of Oxygen Content Of Charpy-V Toughness In 3%Ni Steel SMAW Weld Metal, Surian, E.S., Trotti, J.L. and Boniszewski, T.II-A-796-89, The Effect Of Aluminum In Shielded Metal-Arc C-Mn Steel Multi-Run Deposits, Evans, G.M.II-A-798-89, Internal Friction Measurement Of Carbon-Manganese Steel Weld Metal, den Ouden, G. and Peekstok, E.R.II-A-799-89, Nitrogen Absorption During Arc Welding, den Ouden, G. and Griebling, O.II-A-802-90, New Results On The Study Of A Simple Method To Evaluate The Moisture Resistance Of MMA Welding Electrodes, Maraniello, E., Smocovich, M. and Timerman, R.II-A-803-90, Influence Of The Type Of Aging On The All Weld Metal Tension Test Results, Maraniello, E. and Timerman, R.II-A-804-90, The Rear-Earth Metals Influence On The Weld-Metal Microstructure And Impact-Toughness, Kurlanov, S.A., Potapov, N.N. and Natapov, O.B.II-A-805-90, Minutes Of The Meeting Held In Bratislava, 29th March 1990, Evans, G.M.II-A-806-90, Annual Report For 1989/1990, Evans, G.M.II-A-807-90, List Of Sub-Commission Members, Evans, G.M.II-A-809-90, Montreal Annual Assembly. 24-27 July, 1990, Anon.II-A-810-90, Working Programme For The Year 1990/91, Evans, G.M.II-A-811-90, Effect Of Nickel And Manganese On Structure And Properties Of Multi Layer Weld Metal, Alekseev, A.A., Shevchenko, G.A., Pokhodnya, I.K., Yurlov, B.V. and Yavdoshchin, I.R.II-A-812-90, A Software System For Computer Aided Design Of Covered Electrodes, Bingfan, Z., Wushen, Li., Yuejian, Z. and Deliang, R.II-A-813-90, Weld Metal Hydrogen - A Review Of It's Determination And Other Control AspectsFor The 1990's, Symons, H.O.II-A-814-90, Underwater Wet Welding, Szelagowski, P.II-A-816-90, Mechanisms Of Inclusion Formation In Al-Ti-Si-Mn Deoxidized Steel Weld Metals,Kluken, A.O. and Groing, O.II-A-817-90, The Effect Of Alloying Elements On The Microstructure And Properties Of Ferritic All-Weld Metal Deposits, Anon.II-A-818-90, Measurement Of Hydrogen In Ferritic Arc Weld Metal Draft IIW/ISO Standard, Anon.II-A-82-01, Effects Of Atmospheric Storage Condition On Weld Metal diffusible Hydrogen Content Of Gas Shielded Cored Wires, A Brief Study For IIW Sub-Commission II-A, van der Mee, V.II-A-820-90, Comparative Testing Of The G-1006H And OB 2558 Gas Analyzers For DiffusibleHydrogen Determination In Deposited Weld Metal, Paltsevich, A.P. and Pavlik, V.A.II-A-821-90, Moisture Resistance Determination For Manual Metal Arc Welding Electrodes, Anon.II-A-822-90, Relationship Between Structural And Chemical Microheterogeneity Of Welds Alloyed With Nickel-Manganese And Carbon-Manganese, Pokhodnya, I.K., Voitkevitch, V.G.,

Page 35

Shevchenko, G.A. and Evans, G.M.II-A-823-90, Effect On Phosphorus On Weld Impact Toughness And Chemical Michroheterogeneity, Pokhodnya, I.K., Voitkevitch, V.G., Alexeev, A.A., Denisenko, A.V. and Evans, G.M.II-A-824-90, Exposure To Electrodes In A Small Box According To IIW-Doc. II-A-802-90, Hagmann, T. and Million, A.II-A-825-90, Minutes Of The Meeting Held In Eisenberg (FRG) On 24th October 1990, Evans, G.M.II-A-85-62, Micro-Fissuring In Multi-Run Arc Weld Deposits, Christensen, N., Evans, G.M. and Kvan, T.II-A-86-62, Survey Appertaining To Low Hydrogen Electrodes, Anon.II-A-869-92, The Effect Of Titanium In Manganese Containing MMA Weld Deposits, Evans, G.M.II-A-872-92, The Effect Of Nitrogen And Strain Aging Of C-Mn Steel Welds, Mandziej, S.T.II-A-873-92, An Update Of The State-Of-The-Art Of Weld Metal Hydrogen Cracking, Vuik, J.II-A-87-62, Methods For The Definition Of Extra-Low Hydrogen Electrodes, Christensen, N.II-A-878-93, Nitrogen And Strain Aging Effects On Steel Weld Metal Microstructure And Fracture Toughness Behaviour, Achar, D.R.G. and Kocak, M.II-A-880-93, Microstructure And Toughness Relationship In C-Mn-Cr All-Weld Metal Deposits, Jorge, J.C.F., Rebello, J.M.A. and Evans, G.M.II-A-883093, Effect Of Nitrogen On Properties Of Submerged Arc Weld Metal, Lau, T.W., Sadowski, M.M., North, T.H. and Weatherly, G.C.II-A-884-93, Documents Issued Between 1982/1992, Anon.II-A-886-93, Control Of Chemical Composition And Microstructure In Low-Carbon MicroalloyedSteel Weldments, Liu, S. and Indacochea, J.EII-A-887-93, Physical And Chemical Phenomena Influencing Slag Detachability During Welding, Olson, D.L., Edwards, G.R. and Marya, S.K.II-A-888-93, Non-Equilibrium Of Weld Metal In Flux-Related Processes, Olson, D.L., Edwards,G.R., Liu, S. and Matlock, D.K.II-A-889-93, Reproducibility And Reliability Of Hydrogen Measurements At A Level Of Less Than 5 ml Per 100g Deposit Weld Metal (SMAW), Van Wortel J.VII-A-8-90, Microanalysis Of Inclusion / Matrix Interfaces In Weld Metals, Es-Souni, M. and Beaven, P.A.II-A-894-93, Working Programme For The Year 1993/1994, Evans, G.M.II-A-895-93, Glasgow Annual Assembly, 28 August To 4 September, 1993, Kotecki, D.J.II-A-896-93, Moisture Content Of The Coating And Diffusible Hydrogen Of The Weld Metal From E 7016 And E 7018 Ordinary And Moisture Resistant Electrodes: Round Robin Test, Anon.II-A-897-93, AWS Task Group Findings On Moisture Testing Of Welding Consumables: Progress Report, Quintana, M.A.II-A-898-93, An Evolution Of Rapid Methods For Diffusible Weld Hydrogen, Jenkins, N., Hart, P.H.M.H. and Parker, D.H.II-A-899-93, An Opinion To The Proposal Of Ultra Low Hydrogen Level In The Specification OfWelding Materials, Anon.II-A-900-93, Effects Of Chemistry, Density And Size Distribution Of Inclusions On The Nucleation Of Acicular Ferrite Of C-Mn Steel Shielded-Metal-Arc-Welding, WeldmentsII-A-901-93, Microstructure And Properties Of Ferritic Steel Welds Containing Al And Ti,

Page 36

Evans, G.M.II-A-902-93, Transformation Kinetics Of Ferrous Weld Metals, Thewlis, G.II-A-903-93, Absorption Of Hydrogen In Iron During Arc Melting, Hooijmans, J.W. and Den Ouden G.II-A-904-93, Investigation Of The Kinetic Process Of Metal-Oxygen Reaction During Shielded Metal Arc Welding, Chen, J.H. and Kang, L.II-A-905-93, The Effect Of Carbon On The Microstructure And Mechanical Properties Of All-Weld Metal From An E7024 SMAW Electrode, Surian, E., Maraniello, E. and Boniszewski, T.II-A-906-94, A Comparative Study Of Techniques To Measure Diffusible Hydrogen Content Of Welds, de Abreu, L.C., Modenesi, P.J. and Marques, P.V.II-A-909-94, The Effect Of Drying Conditions Of Diffusible And Potential Hydrogen Levels Of AWS E9018-M Electrodes, II-A-910-94, Underwater Wet Welding Consumables For Offshore Applications, Sanchez-Osio,A., Liu, S., Olson, D.L. and Ibarra, S.II-A-911-94, Model For Boron Effects In Steel Welds, Bhadeshia, H.K.D.H. and Svensson,L.-E.II-A-912-94, Microstructure And Toughness Of Local Brittle Zone Of HSLA Steel Multipass Weld Metals, Cheng, Y. and Jianhong, C.II-A-913-94, Influence Of Titanium And Nitrogen On The Fracture Properties Of Weld Metals, Kocak, M., Peterovski, B., Richter, E. and Evans, G.M.II-A-914-94, Weldability Of Modern High Strength Steels, II-A-915-94, The Effect Of The Welding Parameters, Used Within The AWS A5. 5-81 Requirements, In The E11018-M Electrode All-Weld-Metal, Vercesi, J. and Surian, E.II-A-916-94, The Effect Of Mg Content Of The Arc Stability Of SMAW E7016-C21/8016-C2 Manual Electrode, Farias, J.P., Quites, A.N. and Surian E.S.II-A-917-94, Round Robin Test On Moisture Content Of The Coating And Diffusible Hydrogen Of The Weld Metal From E 7016 And E 7018 Ordinary And Moisture Resistant Electrode: FirstDraft, Corvalan, P. and Surian, E.II-A-919-94, Effect Of Al In Ti-Microalloyed Mn-Ni-Mo Welding Wire On Microstructure And Toughness Of Deposited Metal, Changying, T., Xianhui, Z. and Weifeng, S.II-A-920-94, Additional Information About The Practical Procedure Used For The Round RobinTest Of Moisture Resistant Electrodes, Corvalan, P. and Surian, E.II-A-921-94, Moisture Content Of The Coating And Diffusible Hydrogen Of The Weld Metal From E7016 And E7018 Ordinary And Moisture Resistant Types: Round Robin Test, Dickehut,G., Corvalan, P. and Surian, E.II-A-928-94, Additional Discussion About The Practical Procedure Used To Perform The Round Robin Test Of Ordinary And Moisture Resistant E7016 And E7018 Type Electrodes, Surian E. and Corvalan, P.II-A-929-94, Effect Of The Variation Of The Slag Basicity On An AWS A5.1-91 E6013 Type Electrode., De Rissone, N.M.R., Corvalan, P. and Surian, E.II-A-930-94, Effect Of Chromium On The Microstructure/Toughness Relationship In C-Mn-Mo Weld Deposits, Jorge, J.C.F., Souza, L.F.G., Rebello, J.M.A. and Evans, G.M.II-A-931-94, Studies Of AWS E6013 Rutile Electrodes. Part 1: Effects Of Calcium Carbonate, Boniszewski, T., Evans, G.M. and Hart, P.H.M.II-A-932-94, Microstructure And Properties Of Ferritic Steel Welds Containing Ti And B, Evans, G.M.

Page 37

II-A-933-94, Evaluation Of The Effect Of Multiple PWHT On The Microstructure And Mechanical Properties Of A Ferritic Weld Metal, Costa, H.R.M., de S.Bott, I. and Ouro, C.R.II-A-934-94, The Effect Of Welding Parameters On High Strength SMAW All-Weld-Metal, Vercesi, J. and Surian, E.II-A-935-94, Influence Of Post-Welding Heat Treatment On The Mechanical Properties Of 2.25Cr-1Mo Steel Weld Metals, Jorge, J.C.F., Souza, L.F.G., Teixeria, J.C.G. and Silva Filho, W.A.II-A-936-94, Microstructural Evaluation Of High Strength Steel Weld Metal With Varying Cr Content By Means Of Scanning Electron Microscopy, de S.Bott, I., Souza, L.F.G., Jorge, J.C.F. and Surian, E.II-A-938-94, Influence Of Oscillation Parameters On Formation In Automatic Fe-B Hardfacing, Scotti, A.II-A-979-82, Large Heat Input Submerged-Arc-Welding Of 50 kgf/mm2 Cryogenic Steels, Kato,T., Motomatsu, R., Mizoguchi, S., Mori, N., Namura, M., Sugioka, I. And Wakabayashi, M.II-C-007-94, Embrittlement Of Stainless Steel Welds By Low Temperature Heat Treatment: A Summary Review, Gooch, T.G., Farrar, J.C.M. and Marshall, A.W.II-C-008-94, On The List Of The Samples Prepared As The Delta-Ferrite Content Secondary Standards, Merinov.II-C-010-94, Investigation To Compare Hot Cracking Tests - External Loaded Speciments-, Anon.II-C-011-94, Minutes Of The Meeting Of Sub-Commission II-C In Basel, 11th May 1994, Rabensteiner, G.II-C-022-94, Control Of Covered Electrode Heating By Flux Ingredients Substitution, Bracarense, A.Q. and Liu, S.II-C-023-94, Welding - Determination Of Ferrite Number In Austenitic And Duplex Ferritic-Austenitic Steel Weld Metal Deposited By Covered Cr-Ni Steel Electrodes, Anon.II-C-028-94, Low Temperature Properties Of Weld Metals For Cryogenic Applications, Karlsson, L., Pak, S. and Andersson, S.L.II-C-100-97, Annual Report. Subcommission II-C 1996/1997, Anon.II-C-101-97, List Of Members Of Subcommission II-C. Revision Of May 1997, Anon.II-C-102-97, Subcommission II-C List Of Documents: Issued Since The 1996 Annual Assembly In Budapest, Anon.II-C-103-97, FN Measurement Round Robin Using Shop And Field Instruments After Calibration By Secondary Standards - Summary Report, Kotecki, D.J.II-C-104-97, A Comparison Of Chemical Composition Of Weld Pads, Anon.II-C-105-97, Welding Consumables-Deposition Of A Weld Metal Pad For Chemical Analysis, Kotecki, D.J.II-C-106-97, IIW Subcommission II-C Working Programme 1997-1998, Anon.II-C-107-97, Procedure For A Round-Robin CPT-Determination By Means Of An Acidified Modified ASTM G48-A Method, Doyen, R.II-C-108-97, Welding Consumable Development For A Cryogenic (4 K) Application, Kane, S.F.and Farland, A.L.II-C-110-97, Working Hardening Of Austenitic Manganese Hardfacing Deposits, Kotecki, D.J. and Rajan, V.B.II-C-111-97, An Application Of Strain Induced Crack Opening (SICO) Test For Evaluation Of Weld Metal Susceptibility To Microfissuring, Mandziej, S.T. and Chen, W.C.II-C-112-97, List Of Member Of Subcommission II-C. Revision Of August 1997, Anon.

Page 38

II-C-113-97, Welding Consumables - Deposition Of A Weld Metal Pad For Chemical Analysis, Anon.II-C-114-97, Annual Report - IIW Commission II. Annual Assembly Meetings - San Francisco, 16 To 18 July, 1997, Kotecki, D.J.II-C-115-97, Draft Agenda For The Meeting To Be Held At The Hotel Pauw In Maastricht, The Netherlands, Anon.II-C-118-98, List Of Members Of Subcommission II-C. Revision Of February 1998, Anon.II-C-119-98, Draft Agenda For The Meeting To Be Held At The Company ESAB AB In Gothenburg, Sweden, Anon.II-C-121-98, Testing, Certification And Approval Of Welding Consumables, Anon.II-C-122-98, Committee Correspondence. Retest Of Impacts In CEN TC121 SC3 N322, Kotecki, D.J.II-C-123-98, Committee Correspondence, Responses To Voting On ISO/DIS 8249, Kotecki, D.J.II-C-124-98, Metrode Technical Note Based On: Hydrogen In Duplex Stainless Steel Welds, Kacar, R.II-C-125-98, Reproducibility Of Ferrite Measurements, Farrar, C.II-C-127-98, Results Of Round Robin CPT Determination By An HCl Acidified Modified ASTM G48 A Method., Karlsson, L. and Esab, A.B.II-C-128-98, Status Report: New Stainless Steel Secondary FN Standards, McCowan, C.N., Siewert, T.A. and Vigliotti, D.P.II-C-129-98, An Application Of Strain Induced Crack Opening (SICO) Test For Evaluation Of Weld Metal Susceptibility To Microfissuring, Mandziej, S.T. and Chen, W.C.II-C-130-98, Welding Consumables. Test Methods And Quality Requirements For Conformity Evaluation Of Consumables. Part 1:Anon. Primary Methods And Evaluation, II-C-131-98, Minutes Of The Meeting Of Sub-Commission II-C. Held On The Company Premises Of EASB AB In Gothenburg, Sweden, Anon.II-C-132-98, Annual Report Subcommission II-C 1997.1998, Anon.II-C-133-98, List Of Documents: Issued Since The 1997 Annual Assembly In San Francisco, Anon.II-C-134-98, List Of Members Of Sub-Commission II-C, Anon.II-C-135-98, Working Programme 1998 - 1999, II-C-136-98, FN Measurement Round Robin Using Shop And Field Instruments After Calibration By Secondary Standards - Final Summary Report, Kotecki, D.J.II-C-137-98, Stainless Steel FN Standards: Gage Calibration And Assignment Of Values, McCowan, C.N., Siewert, T.A. and Vigliotti, D.P.II-C-138-98, Reproducability Of Ferrite (FN) Measurements Carried Out On Real Weldments, Farrar, J.C.MII-C-139-98, A Quasi Martensite Line On The WRC-1992 Diagram, Kotecki, D.J.II-C-140-98, List Of Members Of Sub-Commission II-C, Anon.II-C-141-99, Draft Agenda, Anon.II-C-142-99, Annual Report 1998. Testing And Measurement Of Weld Metals, Anon.II-C-143-99, Working Programme 1998-1999, Anon.II-C-144-99, Evaluation Of The Weld Pads For Chemical Analysis Proposed By ISO/DIS 6847,Kotecki, D.J.II-C-145-99, Results Of Round Robin CPT Determination By An HCl Acidified ASTM G48-A Method, Karlsson, L. and Sweden, A.B.

Page 39

II-C-146-99, Cause Of Variability Of CPT Results For Ni-Base Weld Metal, Karlsson, L and Bergqvist, E.-LII-C-147-99, For Carrying Out Ferrite (FN) Measurements On A Series Of Real Weldments, Anon.II-C-148-99, Comments And Additional Results To IIW-Document: IX-1923-98 Investigation ToCompare Hot Cracking Tests - Externally Loaded Specimen -, Wilken, K.II-C-149-99, Stainless Steel FN Secondary Values: Gage Calibration And Assignment Of Values, McCowan, C.N., Siewert, T.A. and Vigliotti, D.P.II-C-151-99, Report Of Investigation. Secondary Ferrite Number Standard - Low Range, McHenry, H.I. and Gills, T.E.II-C-152-99, Influence Of Composition Of High Alloyed Covered Electrodes On Properties Of Dissimilar Welded Joints Of Cryogenic 9% Nickel Steel, Mazel, I.A. and Kouskov, I.V.II-C-153-99, Destructive Tests On Welds In Metallic Materials - Method For Taking Samples For Delta Ferrite Measurement, Anon.II-C-154-99, Deposition Of A Weld Metal Pad For Chemical Analysis, Anon.II-C-155-99, Minutes Of The Meeting Of Sub-Commission II-C Held In Saint Louis, Missouri, USA On Tuesday, 20 April 1999, Anon.II-C-156-99, Annual Report. Sub-Commission II-C 1998-1998, Anon.II-C-157-99, List Of members Of Sub-Commission II-C, Anon.II-C-158-99, List Of Documents: Issued Since The 1998 Annual Assembly In Hamburg, Germany, Anon.II-C-159-99, Working Programme 1999-2000, Anon.II-C-160-99, Stainless Steel FN Secondary Standards: Gage Calibration And Assignment Of Values, McCowan,C.N., Siewert, T.A. and Vigliotti, D.P.II-C-161-99, For Carrying Out Ferrite (FN0 Measurements On A Series Of Real Weldments, Anon.II-C-162-99, Results Of Round Robin CPT Determination By An HCl Acidified Modified ASTM G48-A Method, Karlsson, L.II-C-163-99, Report Of Voting/Annex, Anon.II-C-164-99, Welding Consumables - Deposition Of A Weld Metal Pad For Chemical Analysis, Anon.II-C-165-99, List Of Members Of Sub-Commission II-C, Anon.II-C-166-99, List Of Documents: Issued Since The 1998 Annual Assembly In Hamburg, Germany, Anon.II-C-167-99, Testing And Measurement Of Weld Metal. Working Program 1999-2000, Evans, G.M.II-C-168-99, Investigation To Compare Hot Cracking Tests -Externally Loaded Specimen-, Wilken, K.II-C-169-99, Intermediate Meeting Draft Agenda, van der Mee, V.II-C-170-99, List Of Members Of Sub-Commission II-C, Anon.II-C-171-99, Modelling Of The PVR-Test To Examine The Origin Of Different Hot Cracking Types, Herlod, H., Streitenberger, M. and Pchennikov, A.II-C-172-99, Minutes Sub-Commission II-C Meeting November 14, 1999, van der Mee, V.II-C-173-99, Metallurgical Examination During Weld Procedure Qualification For Ferritic-Austenitic Stainless Steel, Gooch, T.G. and Woollin, P.II-C-174-99, Comments On Standardisation Of Hot Cracking Tests, Wilken, K.II-C-175-99, Comparison Of Weld Hot Cracking Tests. Summary Of An IIW Round Robin

Page 40

Study, Finton, T.L., Lippold, J.C. and Bowers, R.J.II-C-176-00, Intermediate Meeting. Draft Agenda, van der Mee, V.II-C-177-00, List Of Documents Issued Since The 1998 Annual Assembly In Hamburg Germany, Anon.II-C-178-00, Pitting Corrosion Of Weldments In High-Nitrogen Austenitic Stainless Steel, Woollin, P.II-C-181-00, NIST Special Publication. Standard Reference Materials: Secondary Ferritic Number, Reference Materials, Gage Calibration And Assignment Of Values, McCowan, C.N., Siewert, T.A., Vigliotti, D.P. and Wang, C.M.II-C-182-00, Method For Taking Samples For Delta Ferrite Measurement, Anon.II-C-183-00, Pitting Corrosion Of Weldments In High-Nitrogen Austenitic Stainless Steel, Woollin, P.II-C-188-00, Annual Report. Sub-Commission II-C 1999/2000, van der Mee, V.II-C-189-00, Proposed Working Program. Sub-Commission II-C 2000/2001-07-30, van der Mee, V.II-C-190-00, Working Program 2000-2001, Anon.II-C-191-00, Effect Of Microfissures On Corrosion Performance Of Austenitic Stainless Steel Weld Metals, Lundin, C.D., Cui, Y., Zhou, G., Liu, P. and Wen, S.II-C-192-00, List Of Members Of Sub-Commission II-C, Anon.II-C-193-00, List Of Documents: Issued Since The 1998 Annual Assembly In Hamburg, Germany, Anon.II-C-194-00, Intermediate Meeting. Draft Agenda., Van der Mee, V.II-C-195-00, Weld Dilution And Martensite Appearance In Dissimilar Metal Welding, Kotecki, D.II-C-196-00, Progress Report - Ferrite Round Robin, Zhang, Z and Farrar, C.II-C-199-00, Minutes Of Sub-Commission II-C Meeting, van der Mee, V.II-C-200-00, List Of Documents, Issued Since The 1998 Annual Assembly In Hamburg, GermanyII-C-201-00, Intermediate Meeting. Draft Agenda, AnonII-C-202-01, Draft prEN ISO 17641 - Hot Cracking Tests For Weldments, Farrar, J.C.M.II-C-203-01, Draft European Standard PrEN ISO 17641-1 To 17641-3, Mandziej, S.T.II-C-204-01, Comparison Of Ferrite Measurements Techniques As Applied To Duplex Stainless Steel Castings Utilising Point Counting, Magne-Gage And Feritscope(, Lundin, C.D., Ruprecht, W.J., Wen, S. and Zhou, G.II-C-205-01, A New Ferritic-Martensitic Stainless Steel Constitution Diagram. New Equivalency Relationships Improve The Accuracy For Predicting Weld Metal Microstructure, Balmforth, M.C. and Lippold, J.C.II-C-206-01, Crevice Corrosion Testing Of Stainless Steels. Tests Methods And Effect Of Crevice Geometry, Rogne, T. and Drugli, J.M.II-C-207-01, The Effect Of W Modification Of Duplex Stainless Steel On The Behaviour Of Precipitation Of Secondary Phases And Stress Corrosion Cracking, Kim, J.S., Lee, J.S. and Kim, K.Y.II-C-208-01, Effect Of Intermetallic Phases On Environmental Cracking Resistance Of Superduplex Weld Metal In Sour Media, Woollin, P.II-C-209-01, Preliminary Summary Report On Round Robin Experiment - Ferrite MeasurementAnd Prediction In Real Weldments, Farrar, J.C.M. and Zhang, Z.II-C-210-01, Comments On Standardisation Of Hot Cracking Tests prEN ISO 17641, Part 1-3,

Page 41

Wilken, K.II-C-211-01, Hot Cracking Tests For Weldments - Part 3: Externally Loaded Tests, Anon.II-C-212-01, Standardisation Of Hot Cracking Tests, Wilken, K.II-C-213-01, Draft European Standard prEN ISO 17641-1, Edwards, M.II-C-268-68, Progress Report On The International Testing Program For The Determination OfFerrite Content In Austenitic Stainless Steel Weld Metals, Girardi, U. and Masetti, F.II-C-529-77, Measurement Of Ferrite Content In Austenitic Stainless Steel Weld Metal Giving Internationally Reproducing Results, Stalmasek, E.II-C-595-79, The Development Of The Calibration Method For Instruments To Measure The Delta-Ferrite Content Cr-Ni Steel Of Various Composition, Merinov, P., Entin, S., Beketov, B. and Runov, A.II-C-738-85, All Weld Metal Test Assemblies For The Classification Of Corrosion-Resisting Chromium-Nickel Steel Covered Arc Welding Electrodes, Rabensteiner, R.II-C-740-85, Effects Of Residual, Impurity And Microalloying Elements On Properties Of Austenitic Stainless Steel Weld Metals, Marshall, A.W. and Farrar, J.C.M.II-C-741-85, The New Extra Low Interstitial Ferritic Stainless Steels And Their Welds, Morgenfeld, J., Perez, T. and Solari, M.II-C-744-85, Calculated FN Or EFN Versus Measured EFN Or Calibration FN For Various Coating Thickness (Using mm), Kotecki, D.II-C-745-85, All Weld Metal Test Coupon For The Classification Of Covered Electrodes For Manual Metal Arc Welding Of Mild And Low Alloy Steel, Anon.II-C-746-85, Test Piece For The Determination Of Hardness For Covered Electrodes Deposited Metal, Anon.II-C-771-86, Test Piece For The Determination Of Hardness For Covered Electrodes Deposited Metal, Anon.II-C-782-87, Determination Of The Extended Ferrite Number On Set McKay Secunday Weld Metal Samples, Verwey, M. and van Nassau, L.II-C-785-87, Minutes Of The Meeting Of Sub-Commission II-C The Hague, October 31, 1986, Anon.II-C-787-87, A Method For Producing Secondary Weld Metal Standards For Calibrating Instruments For The Measurement Of Ferrite In Duplex Austenitic-Ferrotic Stainless Steel Weld Metals, Kotecki, D.J.II-C-792-87, Minutes Of The Meeting Of Sub-Commission II-C. Madrid, April 2, 1987, van Nassau, L.II-C-794-87, Annual Report Of Sub-Commission II-C, 1987, Anon.II-C-795-87, List Of Members Of Sub-Commission II C, Anon.II-C-796-87, List Of Documents Sub-Commission II C, Anon.II-C-797-87, All Weld Metal Assemblies For The Classification Of Corrosion Resisting Chromium And Chromium-Nickel Steel Covered Arc Welding Electrodes, Anon.II-C-798-87, Prediction Of Austenitic Weld Metal Microstructure And Properties, Olson, D.L.II-C-799-87, Instructions 2nd FN Round Robin Test, Anon.II-C-800-87, Effect Of Welding Parameters On The Content Of Delta Ferrite In Austenitic Stainless Steel Weld And Clad Metals, Prasad Rao, K., Krishnan, K.N., Rama Rao, V. and Guru Raja, G.J.II-C-801-87, Effect On Heat Input On The Microstructure And Pitting Corrosion Resistance Of Nitrogen Added Type 304 SS Weld Metal, Kamachi Mudali, U., Gill, T.P.S., Dayal, R.K., and Gnanamoorthy, J.B.

Page 42

II-C-802-87, Investigation On The Regularity Of Horn-Shaped Propagation Of Solidification Crack Occurring In Weld Metals With The Trans-Varestraint Test, Linmiao, S. and Rihui, P.II-C-803-87, All Weld Metal Test Coupon For Testing The Mechanical Properties Of Covered Electrodes For Manual Metal Arc Welding Of Low Alloy Steel, Anon.II-C-808-87, An Investigation On The Mechanical Properties Of A Weld Metal Deposit Made By Submerged Arc Welding With Iron Powder Addition, Schlick, R.II-C-809-87, Hardenability Of Weld Heat-Affected Zones With HSLA Steels, Tecco, B.G.II-C-810-87, The Effect Of Magnetic Arc Oscillation On Hot Cracking Sensitivity Of 17% Chromium Ferritic Stainless Steel GTA Welds, Anon.II-C-811-87, Application Of Statistical Methods For Reporting Of Welding Data, Vecchia, D., Siewert, T.A., Jones, J.E., Liu, S. and Olson, S.L.II-C-812-88, Minutes Of The Meeting Of Sub-Commission II-C. Rio De Janeiro, November 11,1987, van Nassau, L.II-C-813-88, Effect Of Rapid Solidification On Stainless Steel Weld Metal Microstructures And Its Implications On The Schaeffler Diagram, David, S.A., Vitek, J.M., and Hebble, T.L.II-C-815-88, Charpy V-Notch Tests: Influences Of Striker Geometry and Specimen Thickness,Towers, O.L.II-C-822-88, Annual Report Sub-Commission II-C, 1988, Anon.II-C-823-88, List Of Members Of Sub-Commission II-C, Anon.II-C-824-88, List Of Documents Sub-Commission II-C, Anon.II-C-825-88, Effect Of Si (and N) On Ferritic In Austenitic Steel Weld Metal, Orning, H. and Richter, M.II-C-825-88, Ferrite Content Of Austenitic Cr-Ni Steel Electrodes According To IIW Document II-964-81 Welded With Ar Shielding, Ornig, H. and Richter, M.II-C-859-90, Annual Report Sub-Commission II C, 1989/1990, AnonII-C-873-91, Ferrite Measurement And Control In Duplex Stainless Steel Welds, Kotecki, D.J.II-C-877-91, Comparative Studies Of Ferrite Content Of Stainless Steel Weld Metals By Various Measuring Methods - Part I, Anon.II-C-881-91, Annual Report Sub-Commission II-C 1990/1991, van Nassau, L.II-C-882-91, List Of Members Of Sub-Commission II-C, Anon.II-C-883-91, List Of Documents: Period July 1990 - May 1991, Anon.II-E-008-87, Evaluating Contaminants In The Welding Environment, Anon.II-E-011-87, Mild Steel Covered Arc Welding Electrodes, Robert.II-E-012-87, Annual Report For Sub-Commission II-E 1986-1987, Daemen, R.II-E-013-87, List Of Members Of Sub-Commission II-E, Daemen, R.II-E-014-87, List Of Documents - Sub-Commission II-E-1987, Anon.II-E-015-87, Designation Of C-Mn Covered Electrodes For MMA-Welding, Weyland, F.II-E-016-87, List Of Members Of Sub-Commission II-E, Daemen, R.II-E-017-87, Sofia Annual Assembly - 7/10 July, 1987, Evans, G.M.II-E-020-87, Sub-Commission II-E. Meeting Rio De Janeiro - November 13th 1987, Daemen, R.II-E-021-87, Sub-Commission II-E (Classification Of Electrodes), II-E-022-87, Draft Proposal Bases For A Metricated AWS System Of Designation/Classification Of C.MN.MMA Electrodes, Daemen, R.II-E-025-88, Report Of ISO/TC44/SC3 Meeting Held On 1-12-87 In Paris, Shackleton, D.N.II-E-027-88, Analysis - As Per April 29, 1988 - Of The Responses Received For The Questionnaire II-E-023-88 Designation-Classification Of Electrodes, Daemen, R.

Page 43

II-E-028-88, Analysis - As Per April 29, 1988 - Of The Responses Received For The Questionnaire II-E-024-88 Classification Of Electrodes On The Basis Of Fumes, II-E-029-88, Minutes Of The Meetings Held At Abington (UK) On March 15 and 12, Daemen, R.II-E-030-88, Warning Labels, Kotecki, D.J.II-E-031-88, Integration Of AWS And European Welding Consumable Standards, Shackleton, D.II-E-033-88, Annual Report Of Sub-Commission II-E For 1987-1988, Daemen, R.II-E-034-88, List Of Members Of Sub-Commission II-E, Anon.II-E-036-88, International Standards For Arc Welding Consumables, Weyland, F.II-E-093-90, The Effect On The Ratio Between Gauge Length And Diameter On Elongation In Tensile Tests On C-Mn And Low-Alloy Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-E-103-91, The Effect Of The Ratio Between Gauge Length And Diameter On Elongation In Tensile Tests On Stainless Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-E-108-91, The Effect Of The Radio Between Gauge Length And Diameter On Elongation In Tensile Tests On Duplex Stainless Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-E-112-91, Stainless Steel Electrodes. Table Of Chemical Compositions. Table Of Designation Options. Proposed Uses Of The Fourth Designation Digit. Option C For The UseOf The Fifth Designation Digit, Anon.II-E-113-91, Annual Report Of Sub-Commission II-E 1990/1991, Daemen, R.II-E-114-91, List Of Members Of Sub-Commission II-E, Daemen, R.II-E-115-91, List Of Documents Issued By The Sub-Commission Since The Annual Assembly Held In Montreal In July 1990, Daemen, R.II-E-121-91, Minutes Of Intermediate Meeting In Gothenburg, Sweden, October 10, 1991, Daemen, R.II-E-122-91, The Effect OF Tensile Test Specimen Dimension In All Weld Metal Testing Of Super-Duplex Weld Deposit Type E 25G4W, van Nassau, L. and Vesevez, M.II-E-123-92, ISO Central Secretariat Fax No.7786 (13 December, 1991) And M.Bramat Letter Of 17 December, 1991, Kotecki, D.J.II-E-124-92, Intermediate Meeting To Be Held In Rio De Janeiro, Brazil. Thursday, April 9, 1992, Daemen, R.II-E-125-92, Specification For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For shielded Metal Arc Welding, Anon.II-E-132-92, Comments On IIW Document II-1195-92. Specifications For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For Shielded Metal Arc Welding, Anon.II-E-133-92, Rec'd From Japan Delegation August 25, 1992, Anon.II-E-138-93, The Tensile Properties Of Stainless Steel All-Weld Metals By Shielded Metal Arc Welding, Anon.II-E-139-93, Minutes Of The Meeting Of Thursday, 18 January, 1993 Genoa, Italy, Kotecki, D.II-E-140-93, Response To ISO Vote On ISO/DIS 2560 And 11837, Kotecki, D.II-E-141-93, Revision Of ISO 2560: 1973, Shackleton, D.N.II-E-144-93, Principles Of Extruder Hardfacing Metallurgy, Serafini, F.B.II-E-145-93, The Respiratory Health Of Welders, Sferlazza, S.J. and Beckett, W.S.II-E-147-93, Classification Schemes For Iron - Base Hardfacing Electrodes, Anon.II-E-166-94, Generic System For Designation Of Filler Metals Progress Report, Thomas, R.D.

Page 44

II-E-169-94, Delegate's Report - ISO TC44, Subcommittee 3, Kotecki, D.J.II-E-175-94, Specification For Corrosion Resisting Chromium And Chromium-Nickel Steel Electrodes For Shielded Metal Arc Welding, Anon.II-E-176-94, Generic System For Designation Of Filler Metals Progress Report, Thomas, R.D.II-E-178-94, Comments On Specification For Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, II-E-185-94, Outline Of A Draft Standard For The Classification Of Hardfacing Electrodes, Anon.II-E-186-94, Fillet Weld Test For Assessing Root Penetration And Positional Usability For Classification Of Arc Welding Electrodes And Wires, Anon.II-E-187-94, Covered Electrodes For Manual Metal Arc Welding Of Carbon And Carbon-Manganese Steels - Classification, AnonII-E-193-95, Minutes Of Meeting Held In Cambridge On January 24, 1995, Daemen, R.II-E-194-95, Index Of Generic Designation Numbers For Welding Filler Metal Specifications, Anon.II-E-195-94, Welding Consumables For Build-Up And Wear Resistance-Classification System,Anon.II-E-202-95, Standard For The Classification Of Hardsurfacing Electrodes, Anon.II-E-204-95, List Of Members Of Sub-Commission II-E, Daemen, R.II-E-206-96, Draft Agenda For The Intermediate Meeting To Be Held In Brussels - Belgium, Daemen, R.II-E-207-96, Minutes Of The Intermediate Meeting Held In Vienna (Austria) On November 7, 1995, Daemen, R.II-E-208-95, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Hunt, P.II-E-213-96, IIW Standard For The Classification Of Hardsurfacing Electrodes, Arthur, D.II-E-214-96, Draft Standard For Nickel-Base Alloy Covered Electrodes, Anon.II-E-215-96, Minutes Of The Intermediate Meeting Held In Brussels On May 7th, 1996, Daemen, R.II-E-216-96, Annual Report Of Sub-Commission II-E 1995-1996, Daemen, R.II-E-217-96, List Of Members Of Sub-Commission II-E, Daemen, R.II-E-218-96, List Of Documents Issued By The Sub-Commission Since The Annual Assembly In Stockholm, June 1995, Daemen, R.II-E-219-96, Draft Working Program Of Sub-Commission II-E For 1996-1997, Daemen, R.II-E-220-96, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Anon.II-E-221-96, A Classification System For Hardfacing Alloys, Anon.II-E-222-96, Report Of ISO TC44 Meetings Of 25 To 27 June, 1996, Kotecki, D.J.II-E-224-96, Minutes Of The Intermediate Meeting Held In Berlin On 14 November, 1996, Anon.II-E-227-97, Specification For Nickel And Nickel Alloy Covered Electrodes For Shielded Metal Arc Welding, Kotecki, D.J.II-E-228-97, Minutes Of The Intermediate Meeting Held In Madrid On March 20th, 1997, Roberts, L.II-E-229-97, List Of Members Of Sub-Commission II-E, Anon.II-E-230-97, IIW Commission II - 1997 Annual Assembly. San Francisco, California, USA, Kotecki, D.J.

Page 45

II-E-231-97, Annual Report Of Sub-Commission II-E 1996-1997, Roberts, L.II-E-265-98, Welding Consumables - Wire Electrodes, Wires And Rods For Arc Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-E-266-98, Welding And Allied Processes - Flux And Gas Shielded Electrical Welding Processes - Procurement Guidelines For Welding Consumables, Anon.II-E-280-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification. Draft 3, Anon.II-E-282-99, Annual Report Of Sub-Commission II-E 1998-1999, Roberts. L.II-E-283-99, List Of Members Of IIW Sub-Commission II-E, Anon.II-E-284-99, List Of Documents Issued By Sub-Commission, Roberts, L.II-E-285-79, Welding Electrodes - Covered Electrodes Fume Classes, Anon.II-E-285-99, Draft Working Program Of Sub-Commission II-E For 1999-2000, Roberts, L.II-E-286-99, Agenda, IIW Commission II. 1999 Annual Assembly Lisbon, Portugal, Anon.II-E-287-99, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-288-99, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-289-99, Welding Consumables - Wire Electrodes, Wires And Rods For Arc Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-E-290-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Nickel And Nickel Alloys - Classification, Anon.II-E-291-99, Report Of Voting/Annex B, Anon.II-E-294-99, Cohabitation Approach In ISO Welding Consumables Standards, Anon.II-E-295-99, Annual Report - IIW Commission II. July 1999 Annual Assembly - Lisbon, Portugal, Kotecki, D.J.II-E-296-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-298-99, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Non-Alloy And Fine Grain Steels - Classification, Anon.II-E-300-99, Minutes Of The Intermediate Meeting Held In Den Haag Netherlands, November 13th, 1999, Roberts, L.II-E-302-00, International Index Of Welding Filler Metals Classifications, Thomas, R.D.II-E-303-00, Report Of The Meeting Of 2000-01 24/25 In Paris, Kotecki, D.J.II-E-304-00, Report Of ISO TC44/IIW Coordination Committee. Tuesday, 18 January, 2000 - Villepinte, France, Kotecki, D.J.II-E-305-00, Resolutions Taken During Meeting 2000/01/24 And 25 In Institut De Soudure, Paris, Anon.II-E-306-00, Report Of Meeting Of Wednesday, 19 January, 2000, Kotecki, J.II-E-307-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-308-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-309-00, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-310-00, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-311-00, List Of Documents Issued By Sub-Commission, Roberts, L.

Page 46

II-E-312-00, Intermediate Meeting. Wednesday, March 29th, 2000, Roberts, L.II-E-313-00, List Of Members Of IIW Sub-Commission II-E After Lisbon Annual Assembly, vanNassau, L.II-E-314-00, Minutes Of Intermediate Meeting Held In Cambridge, United Kingdom, March 29th, 2000, Anon.II-E-315-00, Annual Report Of Sub-Commission II-E 1999-2000, Roberts, L.II-E-316-00, List Of Members Of IIW Sub-Commission II-E After Lisbon Annual Assembly, Anon.II-E-317-00, Draft Working Program For Sub-Commission II-E For 2000-2001, Roberts, L.II-E-318-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-319-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-320-00, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-321-00, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-322-00, List Of Documents Issued By Sub-Commission (Annual Assembly In Florence, July 12th, 2000), II-E-323-00, IIW Commission II - Agenda. 2000 Annual Assembly - Florence, Italy. 14.00 - 18.00, Monday, 10 July 2000 - Sub-Commission II-A, Anon.II-E-324-00, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-325-00, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-326-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Non-Alloy And Fine Grain Steels - Classification, Anon.II-E-327-00, Welding Consumables - Covered Electrodes For Manual Metal Arc Welding Of Stainless And Heat-Resisting Steels - Classification, Anon.II-E-330-00, Agenda For The Sub-Commission II-E Meeting Of 8 November 2000, Kotecki, D.J.II-E-331-00, List Of Members Of IIW Sub-Commission II-E After Florence Annual Assembly, Anon.II-E-332-00, IIW Sub-Commission II-E List Of Documents Since The 2000 Annual Assembly, Anon.II-E-333-99, Meeting Report - CEN TC121 SC3. Cologne, Germany - 7 & 8 September 2000, Kotecki, D.J.II-E-334-00, Welding Consumables -Covered Electrodes For Manual Metal Arc Welding Of Creep-Resisting Steels - Classification, Anon.II-E-335-00, Welding And Consumables - Wire Electrodes, Wires And Rods For Arc Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-E-337-00, Welding Consumables -Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With Or Without A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-338-00, Welding Consumables - Tubular Cored Electrodes And Rods For Arc Welding With Or Without A Gas Shield Of Stainless And Heat-Resisting Steels - Classificatio92-99, Annual Report - IIW Commission II. July 1999 Annual Assembly - Lisbon, Portugal

Page 47

II-E-343-00, Welding And Consumables - Wire Electrodes, Wires And Rods For Welding Of Stainless And Heat Resisting Steels - Classification, Anon.II-E-344-00, Minutes Of The II-E Meeting Of 8 November 2000. Sandviken, Sweden, Anon.II-E-345-00, List Of Members Of IIW Sub-Commission II-E After November 2000, Anon.II-E-346-00, IIW Sub-Commission II-E - List Of Documents since The 2000 Annual Assembly, Kotecki, D.J.II-E-348-01, Agenda For The Meeting Of IIW Sub-Commission II-E - Tuesday, 27 March 2001,Anon.II-E-349-01, International Index Of Filler Metal Classifications. Progress Report - AWS IFS:2001-08-01, Thomas, R.D.II-E-349-01, Welding And Allied Processes - Flux And Gas Shielded Electrical Welding Processes - Procurement Guidelines For Consumables, Anon.II-E-350-01, Report Of Voting/Annex B - ISO/DIS 14344.2, Anon.II-E-351-01, Welding And Allied Processes - Flux And Gas Shielded Electrical Welding Processes - Procurement Guidelines For Welding Consumables, Anon.II-E-352-01, Meeting Of 22 And 23 January 2001 In Paris, Kotecki, D.J.II-E-354-01, General Index Of Specifications For Use In IFS:2001-08-01, Anon.II-E-355-01, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of Non Alloy And Fine Grain Steels - Classification, Anon.II-E-356-01, Welding Consumables - Tubular Cored Electrodes For Gas Shielded Metal Arc Welding Of Creep-Resisting Steels - Classification, Anon.II-E-357-01, Welding Consumables - Tubular Cored Electrodes For Metal Arc Welding With OrWithout A Gas Shield Of High Strength Steels - Classification, Anon.III-1005-93, Procedure For Spot Welding Of Uncoated And Coated Low Carbon And High Strength Steels, Anon.III-1006-93, Procedures For Determining The Weldability Lobe For Resistance Spot ProjectionAnd Seam Welding, Anon.III-1007-93, Spot Weldability Of Amorphous Al-Mn Electroplated Steel Sheet, Fukui, K., Taka, T., Seto, H. and Uchida, J.-I.III-1008-93, Research On The Weldability In Resistance Spot Welding Of Aluminum Alloy Sheets (Report 1) - Weld Lobe Test -, Anon.III-1009-93, On The Fatigue Life Of The Single Spot-Welded Joint Under The 2-Steps Repeating Loads -Comparison Of Results For Mild Steel And Those For High Strength Steel-, Satoh, T., Abe, H., Yokomine, T. and Nakaoka, T.III-1010-93, Report On Resistance Welding And Related Welding Processes Studies In Japan -1992--, Anon.III-1011-93, Geometrically Nonlinear Behavior Of Spot Welded Joints, Radaj, D. And Zhang, S.III-1012-93, Local Stress Parameters Of newly Proposed Spot-Welded Specimens, Radaj, D. and Giering, A.III-1019-93, A Quality Assurance System For Resistance Welding Operations, Williams, N.T.III-1022-93, Current - Voltage Waveforms Developed In Typical AC/DC Resistance Welded Power Sources, Westgate, S., Lewis, C. and Williams, N.T.III-1027-94, Report On Recent Year Developments Of Resistance Welding In China, Xu, S., Liu, X. and Zhang, B.III-1028-94, Procedure For Reducing The Solution Time By Using Numerical Simulation Techniques For The Measurement Of Weld Nugget Diameter, Matsuyama, K.-I.

Page 48

III-1029-94, The Fatigue Life Of Spot-Welded Joint Under Repeating Loads Of R= -1 -Comparison Of Mild Steel And High Strength Steel-, Satoh, T., Abe, H., Nakaoka, T. and Hayata, Y.III-1030-94, Report On Resistance Welding And Related Welding Process Studies In Japan --1993--, Anon.III-1031-94, Ultrasonic Evaluation Of Spot Welds By Local Immersion Method, Satonaka, S., Nishiwaki, T. and Kohno, Y.III-1035-94, Resistance Welding And Related Processes (Minutes), Williams, N.T.III-1038-95, Automated Quality Assessment In Alternating Current Resistance Spot Welding By Fuzzy Classification, Burmeister, J.III-1039-95, Calculating Electric Power Values During Resistance Forge Welding With Alternating Current, Weber, G.III-1041-95, Behavior Of Cracking Formed In Aluminum Alloy Sheets On Spot Welding, Watanabe, G. and Tachikawa, H.III-1042-95, Control Of Expulsion In Resistance Spot Welding, Suzuki, M. and Hasegawa, H.III-1043-95, Summary Paper On The Fatigue Life Of The Spot-Welded Joint Under Some Kinds Of Repeating Loads In Tensile-Shear -Comparison Of Mild Steel And High Strength Steel-, Satoh, T., Abe, H., Nakaoka, T. and Hayata, Y.III-1044-95, Report On Resistance Welding And Related Welding Processes Studies In Japan -1994-, Anon.III-1045-95, Ultrasonic Evaluation Of Fusion And Solid-Phase Bonding In Spot Welds, Satonaka, S., Takashima, T., Terada, K., Nishiwaki, T. and Kohno, Y.III-1046-95, On Fundamental Characteristics Of Real Rotational Contact Plane In Friction Surfacing, Fukakusa, K.III-1047-95, The Influence Of Welding Parameters On The Formation Of Solute Bands In Resistance Seam Welds Made With Mild Steel, Attorre, D.R., Parker, J.D. and Williams, N.T.III-1049-95, Relative Contribution Of Electrode Tip Growth Mechanisms In Spot Welding Zinc Coated Steels, Holliday, R., Parker, J.D. and Williams, N.T.III-1050-95, Standardization Work - Position Of Commission III, June 1995, Williams, N.T.III-1051-95, Commission II - Resistance Welding And Related Processes Proposed Programme 1995/2000, Anon.III-1052-95, Annual Assembly, Stockholm 12 - 16th June, 1995. Agenda, Williams, N.T.III-1059-96, The Use Of Thermal Imaging Techniques To Determine Heat Distribution At The Weld Interface In Resistance Spot And Seam Welding, Attorre, D.R., Parker, J.D. and Williams, N.T.III-1061-96, A New Estimation Formula For Tensile Shear Strength Of Spot Welded Joint Of Steel Sheets, Kabasawa, M., Funakawa, Y., Ogawa, K. and Tamura, M.III-1062-96, On The Development Of Structural Adhesive Technology For The Automotive Business In Japan, Satoh, T., Miyazaki, Y., Suzukawa, Y. and Nakazato, K.III-1063-96, Report On Resistance Welding And Related Welding Processes Studies In Japan -1995-, Anon.III-1064-96, Nondestructive Evaluation Of Spot Welds By Infrared Thermography, Satonaka, S., Shinozaki, K., Arima, S., Nishiwaki, T. and Kohno, Y.III-1069-96, Testing Of Weld Nugget Quality By Means Of A New Peeling Device, Uran, M.III-1070-96, Budapest Meeting 3 - 6th September 1996. Agenda, Williams, N.T.III-1088-97, Procedure For The Evaluation Of The Life Of Spot Welding Electrodes Using Constant Machine Settings, Anon.

Page 49

III-1089-97, Proposal For Draft ISO Standard. Procedure For Projection Welding Of UncoatedAnd Coated Low Carbon And High Strength Steel Sheet Using Embossed Projections, Anon.III-1090-97, Procedure For Seam Welding Of Uncoated And Coated Low Carbon Steel Sheet, Anon.III-1092-97, Application Of Artificial Intelligence Techniques To Resistance Spot Welding, Brown, J.D., Rodd, M.G. and Williams, N.T.III-1093-97, Quality Assurance Of Resistance Spot Welding By Employment Of Neural Networks, Dilthey, Y. and Dickersbach, J.III-1097-97, San Francisco Meeting 16 - 18 July 1997. Agenda, Anon.III-1102-97, Effect Of Number Of Welds In Spot Welded And Weldbonded Arrays On Static Failure Load Of Individual Spot Welds And Adhesive Bond, Hills, D.R., Parker, J.D. and Williams, N.T.III-1106-98, Commission III Intermediate Meeting, Berlin 18-19 and 20 March 1998, Bosman, A.W.M.III-1109-98, Relations Between Peak Value-Based And RMS Value-Based Descriptions Of Electrical Processes In Resistance Forge Welding With Alternating Current, Weber, G.III-1110-98, Instant Related Description Of The Electrical Relationship In The Secondary Circuit Of Resistance Welding Equipment, Weber, G.III-1111-98, Electrode Wear Assessment Of Spot Welding By Fuzzy Classification, Weber, G.III-1112A-98, Annual Assembly 1998 Hamburg, 13-19 September. Commission III First Provisional Agenda, Bosman, A.W.M..III-1112B-98, Annual Assembly 1998 Hamburg September 13-19. Final Agenda, Bosman, A.W.M.III-1113-98, Real Rotational Contact Plane In Friction Heating Process Of Similar Materials With Same Diameter, Fukakusa, K.III-1114-98, Impulsive High Current Density Spot Welding Of Aluminium Plated Steel Sheet, Yasuyama, M., Ogawa, K., Taka, T. and Fukui, K.III-1115-98, Development Of New Adaptive Control System For Resistance Spot Welding, Ryudou, M., Goto, Y., Fujii, K. and Matsuyama, K.-I.III-1122-98, Relation Between Weld Parameters And Weld Quality In AC Resistance Spot Welding Aluminium, A Novel Approach, Goos, C.III-1124-98, Comparison Of Measurements Of Weld Size And Tensile Force In Peel Testing InAccordance With ISO 10477, Uran, M.III-1126-98A, Annual Assembly 1998 Hamburg - Minutes Of The First Plenary Session, Bosman, A.W.M.III-1129-98, Annual Report 1998 Commission III, III-1134-99, Review On Inspection Techniques For Spot Welds, Satonaka, S. and Matsuyama,K.-i.III-1139-99, Non-Linear Methods In Resistance Welding - The Dynamic Weldability Lobe And Fuzzy Classification, Weber, G.III-1143-99, Annual Assembly Lisbon 21-23 July 1999. Final Agenda, Bosman, A.W.M.III-1144-99, Proposals For Future Work. Results Of A Brainstorm Session At The Intermediate Meeting In Berlin1999, Bosman, A.W.M.III-1149-00, Investigations Into The Influence Of Current Flow Direction On Welds Asymmetry In Resistance Welding With Use Of Inverter Machines, Papkala, H. and Pietras, A.III-1150-00, Study On The Initial Torque Characteristics Of Friction Welding, Kobayashi, A., Machida, M., Matsuda, T. and Nishiwaki, N.

Page 50

III-1153-00, Tensile-Shear Strength Of Spot Welded Structures -Prediction Of Strength And Effect Of Weld Position, Satonak, S., Kiyota, H., Shirakawa, H., Hatta, K.i. and Tukamoto, K.III-1156-00, Online Process Monitoring By Fuzzy Classification During AC Resistance Welding, Weber, G. and Burmeister, J.III-1157-00, Intelligent Weld Gun Identification System, Poll, K. and Matuschek, U.III-1178-01, Program For Commission III Of IIW Annual Assembly 2001, Anon.III-117-98, Optimization Of Signal Inputs To A Neural Network For Modeling Spot Welding Of Zinc Coated Steels, Brown, J.D., Jobling, C.P. and Williams, N.T.III-1179A-01, Annual Assembly Ljubljana, 2001. Draft Agenda, Anon.III-1554-94, Fatigue Resistance Of Spot Welds Under Multiaxial Loads, Hahn, O., Gieske, D., Klasfauseweh, U. and Rohde, A.III-493-73, Terms And Definitions For Friction Welding, Anon.III-511-74, Friction Welding Of Economizer Tubes Of Power Boilers In An Automated Production Line, Anon.III-512-74, The Development And Modern Progress Of Friction Welding In The USSR, Anon.III-513-74, High Frequency Butt Welding Of Boiler Pipers, Bogdanov, V.N. and Korsunov, V.M.III-521-75, Control of the Welding Current and Time On Basis of the Weld Nugget Expansion, Janota, MartinIII-540-76, A New Optimization Methodology To The Determination Of Welding Conditions Of Medium Gauge Mild Steel Plates, Tsuruta, A., Zenri, H. and Matsushima, F.III-541-76, Realistic Mechanical Tests For Resistance Welded Structures, Johnson, K.I. and Dinsdale, W.O.III-545-76, Resistance Spot And Steam Welding Of Dissimilar Metals-RIF Welding, Satoh, T., Katayama, J., Hayashi, T. and Doi, J.III-562-77, Tests For Resistance And Friction Butt Welds, Milan, L. andIII-567-77, Proper Heat Input Control Methods Relevant To Different Drooping Characteristics Of Power Sources- Study On Projection Welding (2nd Report)-, Nakata, S., Hishikawa, M., Suematsu, T. and Kaneda, T.III-568-77, On The Torque In Friction Welding, Hasui, A. and Fukushima, S.III-576-77, Temperature Field Calculation In Steel Spot Welding, Maslov, G.A. and Podlesnykh, V.G.III-581-78, Development And Application Of A Computer Control System For Friction Welding, Drews, P., Meyer, B. and Schmidt, J.III-582-78, The Weldbonding Of Sheet Steel, Jones, T.B.III-583-78, Spot Welding Trials On High Strength Low Alloy Steels, Louis, R.T., Gibson, T.J. and Hobbs, R.M.III-586-78, The Assessment And Testing Of Resistance Spot Welding Electrode Materials, Connell, L.D.III-589-78, Scanning Microscopy Method Used For Estimating The Quality Of Spot Welding OfHeat Treatable Steels, Maslov, G.A. and Podlesnykh, V.G.III-595-78, Contribution To The Friction Welding Aptitude Of Cast Iron GGG 42, Basler, B., Endmann-Jesnitzer, F. and Rehfeldt, D.III-596-78, The Next Generation Of Resistance Welding Controls, Noftsker, R.III-602-79, Resistance Welding Aluminum Sheet, Rivett, R.M. and Westgate, S.A.III-605-79, Friction Welding Of Cr-Mo Steel And Carbon Steel, Hasui, A. and Tanaka, H.III-606-79, Report On Resistance Welding And Friction Welding Studies, Satoh, T.III-608-79, The MIAB Welding Of Steel Tubing, Johnson, K.I., Carter, A.W., Dinsdale, W.O.,

Page 51

Threadgill, P.L. and Wright, J.A.III-614-79, Spot Welding Of Aluminum As Delivered, Ostgaard, E.III-617-79, Resistance And Friction Welding Research In The UK At The Welding Institute Abington, Cambridge, UK., Anon.III-618-79, Resistance Seam Welding Machine Design Criteria For Narrow/Thin Seam Welding, Loebner, R.III-619-79, Seam Welding Of Coated Steels, Oldroyd, P.S. and Williams, N.T.III-632-80, Radial Friction Welding, Nicholas, E.D. and Lilly, R.H.III-633-80, Resistance Welding Of Aluminum Sheet. The Effect Of Electrode Design And Material, Rivett, R.M. and Westgate, S.A.III-634-80, The Failure Of Spot Welds In Low Carbon Mild Steel, Rivett, R.M.III-636-80, Required Properties Of High Strength Steel Sheets For Autobody Parts, Sato, S., Shiokawa, M., Furubayashi, T. and Yamazaki, K.III-638-80, Fatigue Strength Of Multi-Spot Welded Joints- Hypothesis On Fatigue Strength Of Multi-Spot Welded Joints And Its Experimental Verification-, Satoh, T., Katayama, J. and Morii, Y.III-639-80, Report On Resistance Welding And Friction Welding Studies, Satoh, T.III-640-80, All-Union Scientific Research Institute Of Cutting Tools, Fomichev, N.I. and Imshennik, K.P.III-642-80, International Institute Of Welding Assessment Of BAM Feed Back Systems, Krause, H.-J.III-643-80, Problems Of High Strength Steel Sheets In Autobody Production, Yamamoto, T., Takano, T., Oikawa, H., Abe, K. and Ohshima, S.III-645-80, An Industrial Application Of MIAB Welding Of Tubes: A Rear Axle Cross Tube Assembly, Hagan, D. and Riley, N.III-646-80, Spot Welding Of High Strength Steel Sheets For Deep Drawing, Defourny, J., D'Haeyer, R. and Bragard, A.III-647-80, New Insights In Connection With The Assessment Of The Suitability Of Mild Steels For Spot And Projection Welding, Krause, H.-J.III-651-80, Influence Des Processus Electriques Au Soudage En Bout Par Etincelage A Conditions De Formation Des Soudures, Khazov, V.Ya.III-653-80, Methodes D'Elevation De La Fiabilite Des Assemblages Soudes Par Points Des Constructions En Alliages D'aluminium / Method Of Increasing The Reliability Of Welds Of Aluminum Alloys Accomplished By Spot Electric Welding, Martchenko, A. and Orlov, B.III-654-80, Spot And Projection Welding Of High Strength Steels, Jones, T.B. and Williams, N.T.III-655-80, Recommended Projections For Resistance Projection Welding Uncoated Mild SteelSheets, Allen, D.E.III-656-80, Metallurgical Aspects Of Resistance Spot Welding Of Mild Steel, Williams, N.T.III-659-81, Mechanical Properties Of Spot Welded HSLA Steel Sheets For Automotive Applications, Blarasin, A. and Castagna, M.III-663-81, MIAB - Welding - State Of Development In The G.D.R., Burmeister, J. and Winterstein, H.III-664-80, Spot Weldability Of High Tensile Strength Sheet Steel, Yamauchi, N. and Taka, T.III-673-81, Application Of Rotating Arc Butt Welding To Town Gas Pipelines, Takagi, K., Arakida, F., Sato, S., Miyamori, H. and Ozawa, M.III-677-81, Development Of Memorized Condition Assurance Equipment In Friction Welding,

Page 52

Hasui, A., Shinada, K., Araki, Y. and Matsuki, T.III-678-81, Friction Welding Of Sulphur Free Machining Steel, Hasui, A. and Wakida, S.III-679-81, Effect Of Relative Difference Of Bar Diameter On The Friction Welding Phenomena- Study On The Friction Welding Of Different Diameter Bars (Report 1), Hasui, A., Okita, K., Aritoshi, M., Kishimoto, W., Matsuda, S., Yamada, S. and Hira, H.III-680-81, Study On A New Flash Welder For Steel Industry, Yamamoto, T., Okuda, T., Baba,T., Uomori, A., Hara, K., Takahashi, H., Kawanami, T. and Fujiwara, T.III-681-81, Report Of Resistance Welding And Friction Welding Studies, Satoh, T.III-685-81, Report Of The Seminar On Automation Of Welding UN Economic Commission For Europe Working Party On Automation, Konkoly, T.III-691-81, Projection Welding Of Aluminum Alloy Sheet, Westgate, S.A.III-693-81, Resistance And Friction Welding Research In The UK At The Welding Institute Abington, Cambridge, UK, Anon.III-694-81, Magnetarc Welding Theory And Practice, Loebner, R.III-699-81, The Development And Use Of An Inbuilt Shear In A Pickle Line Flash Welder, Semple, G.J.III-706-82, Advances In Flash Butt Welding Control, Podola, N.V. and Krivonos, V.P.III-707-82, Technology And Equipment For Resistance Welding Of Large-Diameter Pipes By Movable Installations In Field Conditions, Paton, B.E., Lebedev, V.K. and Kutchuk-Yatsenko, S.I.III-709-82, L'Etude Et La Mise Au Point Des Techniques De Soudage En Bout Par Etincelage Sur Les Conduites Concues Pour Le Transport Du Gaz A Forte Teneur En Sulfure D'Hydrogene, Lifchitz, V. and Effendiev E.III-714-82, Electrode Life Of Spot Welding Electrodes Depending On Varied Parameters, Krause, H.-J. and Simon, G.III-715-82, Resistance Spot Welding Of Hot-Dip Aluminized Steel Sheet, Lohbrandt, H. and Strassburger, C.III-716-82, Supplementary Models Of Weld Nugget Formation Taking Resistance Spot Welding Of Soft Non-Alloy Steels As An Example, Krause, H.-J. and Simon, G.III-719-82, In-Process Quality Control Of Spot Weld By Detecting Voltage Between Electrode Tips - Adaptive Control For Quality Assurance Of Resistance Spot Weld In Real Time (2nd Report) -, Nakata, S., Nishikawa, M., Kawasaki, M., Horie, J. and Juri, M.III-720-82, Qualitative Assurance Characteristics In Resistance Spot Welds By Adaptive Control System And Its Field Applications, Nakata, S., Aono, S., Suzuki, N., Kawaguchi, Y. and Inoue, M.III-721-82, Stress Distribution Analysis Of Spot-Welded Joints Under Tension-Shear Load, Fujimoto, M., Mori, N. and Sakuma, S.III-722-82, Temperature Dependency Of Spot Welded Joint Strength, Satoh, T., Katayama, J. and Fujita, M.III-724-82, Report On Resistance Welding And Friction Welding Studies, Satoh, T.III-728-82, Resistance And Friction Welding Research In The UK At The Welding Institute Abington, Cambridge, UK, Anon.III-730-82, Etude Parametrique Sur La Formation Du Point, En Soudage Par Resistance, Des Aciers De Construction, Casse, A.III-747-83, Etude Fondamentale Du Soudage Par Points Et Des Traitements Thermiques Des Points De Soudure Sur Acier, Crequy, J., Dijols, M. and Gaillard, R.III-749-83, Friction Welding Of Sintered Carbon Steel And Solid Carbon Steel, Hasui, A., Hida,

Page 53

J. and Hoshino, M.III-750-83, Study Of A New Flash Welder For Steel Industry (Part II), Yamamoto, T., Okuda, T., Baba, T., Uomori, A., Hara, K., Kawanami, T., Bando, H., Kitajima, S. and Shinbashi, I.III-751-83, Report On Resistance Welding And Friction Welding Studies, Anon.III-752-83, Suggested Topics For Future Research In Resistance Welding, Williams, N.T.III-755-83, How Do The Process Control Data For Spot Welding Depend On The Nugget Growth? Krause, H.-J., III-760-83, Spot Weldability Tests For High Strength, Cold rolled Steels, Nishi, T., Saito, T., Yamada, A. and Takahashi, Y.III-765-84, Testing Of Forge Butt Welds / Essais Des Soudures Bout A Bout A La Forge, Lipa, M.III-766-83, Projection Welding Of Aluminum Alloys In Deep Drawing Quality, Eichhorn, F., Emonts, M. and Leuschen, B.III-772-84, Spot Weldability Of The Plated Sheet Steel, Yamauchi, N. and Taka, T.III-773-84, Fatigue Strength Of Spot Welded Joints In Corrosive Environments, Satoh, T., Katayama, J., Fujita, M. and Inoue, S.III-774-84, Report On Resistance Welding And Friction Welding Studies, Anon.III-790-84, Measuring The Dynamic Mechanical Characteristics Of Spot And Projection Welding Machines - Measured Parameters, Measuring Procedures and Initial Results, Krause,H.-J. and Lehmkuhl, B.III-792-84, Joining Compact Steel Cross-Sections By A Modified Resistance Butt Welding Process, Ruge, J., Kohl, C.III-793-84, Resistance Spot Welding On rephosphorized Steels - A Review, Jones, T.B. and Williams, N.T.III-797-84, Test Methods For Torsion Testing Of Spot Welds And Scatter Of The Test Results,Krause, H.-J.III-798-84, Resistance Spot Welding Of High Strength Low Alloy (SHLA) Steel Sheet- A Survey, Dufourny, J. and Bragard, A.III-799-84, Resistance Spot Weldability Of High Strength Steel Sheet, Defourny, J. and Bragard, A.III-800-85, Report On Resistance Welding And Friction Welding Studies In 1984, Anon.III-805-85, Influence Of Current Wave Form On Nugget Formation Phenomena, III-807-85, Heat Transfer Simulation By FEM During Friction Welding, Atsuta, T., Yamashita, S. and Araki, T.III-808-85, Report On Spot Welding Conditions Of High Strength Steel Sheets, Kitagawa, H., Satoh, T., Oma, K. and Oya, R.III-816-85, A Comparison Of The Dynamic Mechanical Characteristics Of Spot-Welding Machines, Krause, H.-J. and Lehmkuhl, B.III-818-85, New Approach For Projection Welding Coated Sheet Metal, Thorne, P. and Geirman, P.III-819-85, Adaptive Feedback Control For Galvanized Welding, O'Brien, J.M.III-820-85, Superior Quality Production Spot Welding Using Adaptive Control, Hawkins, I.L.III-822-85, A Microcomputer Based Sensor System For Resistance Welding Studies, Waters, D.G., Lee, K.-C., Mayhan, R.J. and Dickinson, D.W.III-823-85, Forms Of Dynamic Resistance Curves Generated During Resistance Spot Welding,Watney, D.K. and Nagel, G.L.III-824-85, Friction Welding Of Titanium And Carbon Steel, Hasui, A. and Kira, Y.

Page 54

III-825-85, Annual Report - Commission III 1984. Resistance Welding And Related Welding Processes, Williams, N.T.III-826-83, Spot Weldability Of High Strength Sheet Steels. Continuously Heat Treated and Batch Annealed, Sawhill, J.M.III-828-85, Developpement Des Commandes Programmables Dans Le Procede De Soudage Electrique Par Resistance, Josse, P.III-829-85, Quality Control Of Resistance Welding By Monitoring Of Critical Machine Parameters, Anon.III-830-85, Commission III - Resistance Welding Agenda - Strasbourg Meeting, Williams, N.T.III-832-85, Typical Fracture Typed Obtained When testing Spot Welds In Rephosphorized Steel, Anon.III-833-85, Strasbourg Annual Assembly Minutes Of Meeting 4.9.1985, Anon.III-836-86, Spot Welding Conditions For Steel Sheet Specimens Having Gaps In Them - StudyOf Spot Welding Of High Strength Sheet Steels -, Saito, T. and Takahashi, Y.III-837-86, Resistance Spot Weldability Of Coated Steel Sheets, Kabasawa, M., Matsuda, Y. and Watanabe, I.III-838-86, Effects Of Chemical Composition Of Cross Tension Strength Of Spot Welded Joint Of High Strength Steel Sheets, Kabasawa, M., Ono, M., Sakui, S. and Watanabe, I.III-839-86, Formation Mechanism Of White Line In Butt Welded Joints By Resistance Heating, Takamura, T., Shimomura, T. and Suzuki, S.III-840-86, Friction Welding Of Sintered Steel And Carbon Steel, Hasui, A., Der-Ming, L., Nishino, Y. and Kono, T.III-841-86, Selection Of Welding Parameters And Suppression Of Indentation In Resistance Spot Welding Process With High-Current Density And Short Current Duration, Nakata, S., Fijimoto, Z. and Tamai, S.III-842-86, A Study Of Relationship Between Mechanical Properties Of Spot Welding Machine And Spot Weld Quality, Satoh, T., Katayama, J. and Nakano, T.III-843-86, Empirical Formula For Fatigue Strength Of Single-Spot-Welded Specimens, Satoh, T., Abe, H. and Kataoka, S.III-844-86, Influence Of Reactance In Secondary Circuit On The Weldable Current Range In Single Phase D.C Spot Welding Of This Steel Sheet, Nishiguchi, K. and Matsuyama, K.-I.III-846-86, Definition And Identification Of Defects And Other Features Occurring In Resistance Butt Welds, Anon.III-847-86, The Friction Weldability Of Aluminum Alloy AA7029, Humphreys, B.A. and Barnes, S.III-848-86, The Mechanical And Electrical Properties Of Copper-Steel Friction Welded Joints, Humphreys, B.A. and Barnes, S.III-849-86, Commercially Available In-Process Monitor/Correction Systems For Resistance Welding, Anon.III-850-86, Procedures For Measurement Of Sheet Metal Contact Resistance For The Resistance Welding Process, Needham, J.C.III-853-86, On The IIW International Conference On Automation And Robotization In Welding And Allied Process, Girardi, U. and Konkoly, T.III-858-86, Report On Resistance Welding And Friction Welding Studies In 1985, Anon.III-859-86, Joining Of Dissimilar Material Pipes By Double Friction Welding, Matsui, S., Atsuta,T., Yamashita, S. and Araki, T.III-868-86, A Comment On The Recommended Practice For The Evaluation Of Resistance

Page 55

Spot Weld Monitor And Correction Systems, Anon.III-879-97, Hot Spot Stress Concept For Spot-Welded Joints, Radaj, D.III-880-87, Establishment Of Optimum Welding Conditions Of Magnetically Impelled Arc Butt Welding And Application To Field Operation, Takagi, K., Otsuka, H., Arakida, F., Miyamori, H. and Katsuki, M.III-881-87, A Study Of Projection Welding Using Capacitor Discharge Welding Machine, Yamaguchi, T. and Satoh, T.III-882-87, On The Effect Of Faying Face Condition On Weldability In Friction Welding, Hasui, A. and Matsui, T.III-883-87, Report On Resistance Welding And Friction Welding Studies In Japan - 1986 -, Anon.III-890-87, Friction Welding Of Ceramics To Aluminum Clad Steel, Suzumura, A., Onzawa, T., Ohmori, A. and Arata, Y.III-894-87, Resistance Spot Weldability And Other Properties Of Coated Steel Sheets, Defourny, J., Monfort, G. and Bragard, A.III-895-87, Appraisal Of Resistance Spot Weldability Using Multi Spot Welded Assemblies, D'Haeyer, R., Quinet, J.P. and Defourny, J.III-898-87, Proposals For The Future Work Programme Of Commission III, Williams, N.T.III-899-87, Annual Assembly Sofia, Bulgaria. 6-10th July, 1987, Anon.III-901-87, Forced Upsetting Of Drill Pipes In Friction Welding, Sutovsky, P.M.III-902-87, Photoelastic Load typed Fringe Patterns Of Spot Weld Joints, Radaj, D., Glatzel, G.and Kizler, W.III-903-87, Structural Stress Concentration At Spot-Welded Joints: Improved Model, Comparison Of Results, Stress Singularity, Radaj, D. and Soegiharto, S.III-904-88, Procedure For Peel And Chisel Testing Of Resistance Spot, Embossed Projection And Seam Welds, Williams, N.T.III-905-88, Measurement Of Sheet Metal Contract Resistance In Aluminum Alloys For Spot Welding, Milan, L.III-906-88, Diagnostic Evaluation Of Robotic Cell For Resistance Spot Welding / Evaluation Diagnostique Des Places De Travail Robotises Pour Le Soudage Par Points Par Resistance, Jozef, K., Anton, S., Eduard, D. and Dusan, D.III-907-88, Tests Of Sport Resistance Weldability Of Czechoslovak Rephosphorized Steels / Essais De Soudabilite Par Points Par Resistance Des Aciers Checoslovaques Rephosphorises, Miroslav, M. and Dalibor, S.III-908-88, Friction Welding English Terms And Definitions - Draft, Milan, L. and Roman, M.III-909-88, Statical And Dynamical Properties Of Pneumatical System Of Resistance Welding Machines / Le Comportement Statique Et Dynamique Du Systeme Pneumatique Des Machines A Souder Par Resistance, Stefan, H. and Bedrich, D.III-910-88, Numerical Model Of Resistance Spot Welding / Modele Numerique Du Soudage Par Points Par Resistance, Jan, Z. and Dusan, D.III-912-88, Effects Of Mechanical Properties Of Spot Welding Machine On Electrode Life For Mild Steel, Satoh, T., Katayama, J. and Okumura, S.III-913-88, A Study Of Rotating Behavior Of Arc During The Magnetically Impelled Arc Butt Welding, Satoh, T., Katayama, J. and Otani, M.III-914-88, Report On Resistance Welding And Related Welding Processes Studies In Japan -1987 -, Anon.III-916-88, Instructions For Circulation Of Documents, Anon.

Page 56

III-917-88, Specimen Dimensions And Procedure For Mechanized Peel Testing Resistance Spot, Seam And Embossed Projection Welds, .Anon.III-918-88, Factors Affecting The Seam Welding Of Uncoated Steel (Discussion Document NotFor Publication), Waddell, W. and Williams, N.T.III-919-88, Agenda Meeting - Vienna, Austria July 4-8th, 1988, Williams, N.T.III-921-88, Specimen Dimensions And Procedure For Impact Shear And Cross-Tension Resistance Spot And Projection Welds, Krause, H.-J.III-924-89, Friction Welding Of Metals Process, Terms, Materials, Anon.III-925-89, Development Of Dual-Arm Type Spot Welding Robot And Application In Automotive Industry, Kawamura, K., Kubo, K. and Nakamura, H.III-927-89, Effects Of Mechanical Properties Of Spot Welding Machine On Electrode Life - 2ndReport - Simulation Test For Electrode Life And Collision Phenomenon Of Upper Electrode -, Satoh, T., Katayama, J., Abe, H., Fukuda, Y. and Gohara, K.III-929-89, Local Stress Parameters At The Weld Spot Of Various Specimens, Radaj, D. and Mohrmann, W.III-930-89, Local Fatigue Strength Characteristic Values For Spot Welded Joints, Radaj, D.III-938-89, A Simple Method To Predict The Fatigue Behavior Of Multi Spot Welded Tensile-Sheared Assemblies, Defourny, J.III-940-89, Mechanical Characteristics Of Spot Welding Machines - Review Of Published Literature, Anon.III-942-89, Influence Of Design Parameters On The Fatigue Properties Of Adhesive Bonded/Spot Welded Box Structures, Williams, N.T. and Jones, T.B.III-944-89, Agenda - Helsinki Meeting (4-8th September), Williams, N.T.III-945-89, Influence Of Section Design And Loading Regime On The Fatigue Properties Of Spot Welded/Adhesive Bonded Box Sections, Jones, T.B. and Williams, N.T.III-946-89, Vickers Hardness Testing Of Resistance Spot, Projection And Seam Welds (Low Load And Microhardness), Anon.III-947-89, Specimen Dimensions And Procedure For Cross Tension Testing Resistance Spot And Embossed Projection Welds, Williams, N.T.III-948-89, Specimen Dimensions And Procedure For Shear Testing Resistance Spot And Embossed Projection Welds, Anon.III-949-88, Welding - Resistance Spot And Projection Welds - Destructive Tests Of Welds -Specimen Dimensions And Procedure For Impact Shear Test And Cross Tension Testing, Anon.III-949-89, Revise Version (12.06.1989) Specimen Dimensions And Procedure For Shear Testing Resistance Spot And Embossed Projection welds, Anon.III-963-90, Simplified Formulae For Stress Intensity Factors Of Spot Welds, Radaj, D. and Zhang, S.III-964-90, Stress Intensity Factors For Spot Welds Between Plates Of Dissimilar Materials, Radaj, D. and Zhang, S.III-966-91, Testing Method For Electrode Life Evaluation In Spot-Welding Steel Sheets (Final Draft Of Japan Welding Engineering Society Standard), Satoh, T. And Katayama, J.III-967-91, On Three Dimensional Elastic-Plastic Stress Analysis Of Spot-Welded Joint Under Tensile Shear Load, Satoh, T., Abe, H., Nishikawa, K. and Morita, M.III-968-91, Report On Resistance Welding And Related Welding Processes Studies In Japan, Anon.III-970-91, Translation Of Guide-Line DVS 2902, Part 3, November 1990, Anon.

Page 57

III-972-86, The Fatigue Properties Of Spot Welded, Adhesive Bonded And Weldbonded JointsIn High Level Strength Steels, Jones, T.B. and Williams, N.T.III-976-91, Report Of Activities - 1990, Williams, N.T.III-977-91, Programme For The Meetings. The Hague Netherlands July 1-5th, Williams, N.T.III-981-92, Flash-Butt Welding Of Structural Components Of Aerospace Vehicles, Kuchuk-Yatsenko, S.I., Cherednichok, V.T. and Semenov, L.A.III-982-92, The Application Of Ohm's Law To Resistance Forge Welding With Alternating Current, Weber, G. and Pre(, H.III-983-92, Dynamic Current-Voltage Characteristics For Describing The Electrical Processes In The Secondary Circuit Of Resistance Welding Machines, Weber, G. and Pre(, H.III-984-92, The Transferability Of Standard Alternating Current Methods To Resistance Welding, Weber, G. and Pre(, H.III-985-92, Definitions Of Failure Types And Geometric Measurements For Weld Quality For Resistance Spot, Seam And Projection Welds, Krause, H.-J.III-986-92, Method Of Fatigue Testing For Spot Welded Joints, Anon.III-987-92, Recommendations For Selection And Comparison Of Resistance Spot, Projection And Seam Welding Installations, As Well As Resistance Spot And Seam Welding Appliances, Anon.III-988-92, Estimation Of Strength Of Weldbonded Joint Using Special Tensile-Shear Test Specimen In Mild Steel, Satoh, T., Abe, H., Adachi, K., Terashita, M. and Ejiri, H.III-989-92, Report Of Resistance Welding And Related Welding Process Studies In Japan -- 1991 --, Anon.III-990-92, Upset Weldability Of Nb-Bearing High Strength 600MPa Steel For Wheel-Rim And Mechanism Of Upset Welding, Miyazaki, Y., Ichikawa, M. and Saito, T.III-992-92, A Procedure To Appraise The Resistance Spot Weldability Of Coated Steel Sheets, Schmitz, B. and Defourny, J.III-993-92, Compared Specificities Of Joining Processes For Steel Sheets, Schmitz, B. and Defourny, J.III-994-92, The Relationship Between Machine Dynamics Of Pedestal Spot Welding Machines And Electrode Life, Williams, N.T., Chilvers, K. and Wood, K.III-995-92, Weldability - A Definition Relative To Industrial Requirements, Waddell, W. And Williams, N.T.III-A-725-87, Scanning Electron Metallography Of C-Mn And Low Alloy Steel Welds, Zeemann, A. and Rebello, J.M.A.III-A-726-87, Microstructure, Chemical Composition And Toughness Of Submerged Arc Multipass Welds, Paranhos, R.P.R. and Rebello, J.M.A.III-J-089-85, Traveling Phenomena Of Rotational Plane During Friction Welding - ExperimentalResults And Traveling Mechanism -, Fukakusa, K. and Satoh, T.III-J-17-77, Heat Resistant Alloys Friction Welding, Quatraro, G.III-J-21-78, Survey Of Friction Weld Monitor Applications, Ellis, C.R.G.III-J-22-78, The Joining Of A Steel Shaft To A Disc In Nickel Base Alloy By Friction Welding, Daines, J.W.III-J-26-79, Quality Control By Ultrasonic Fault Detection In Friction Welds Of Metal Steel, Drews, P. and Schmidt, J.III-J-27-0-79, The Role Of The Torsion Test In Friction Welding, Bedford, G.M., Richards, P.J. and Hasui, A.III-J-28-79, Friction Welding Monitor Controller III, Anon.

Page 58

III-J-30-79, Reclamation Of Shafts And Rollers By Friction Welding, Richards, J.D.III-J-32-80, Friction Welding - Analysis And Influence Of The Parameters, Drews, P. and Meyer, B.III-J-33-80, Feedback Control In Friction Welding - Operation Of Computer- And Microprocessor Units To Enlargen The Field Of Application, Drews, P. and Schmidt, J.III-J-34-80, Manufacture Of Spherically Ended Components By Friction Welding, Richards, P.J. and Bedford, G.M.III-J-35-80, Reibschwei(en Von Metallischen Werkstoffen Verfahren Und Grundlagen, Anon.III-J-38-80, Guide Roller Of Printing Machine, Anon.III-J-42-80, Contents (Requirements And Design Considerations For The Use Of Inertia Friction Welding, Requirements For Certification Of Welding Equipment, Qualification Of Welding Procedures, And Qualification Of Operators Using These Procedures And Equipment), Anon.III-J-45-80, Data Sheet For Friction Welding, Bedford, C.M. and Richards, P.J.III-J-45-81, Data Sheet For Friction Welding, Bedford, C.M. and Richards, P.J.III-WG12-15-84, Aspects Metallurgiques Du Choix Des Procedes Et Modes Operatoires, Bensouda, S., Francois, D., Hochon, B., Pradere, G., Jouet, A. and Vialle, M.III-WG12-3-92, Procedures For Determining The Weldability Lobe For Resistance Spot, Projection And Seam Welding 5th Draft, Anon.III-WG12-5-90, Procedure For Spot Welding Of Uncoated Low Carbon Steels. 7th Draft, Anon.III-WG13-1-92, Procedure For The Evaluation Of The Life Of Spot Welding Electrodes. Part 1- Uncoated And Coated Steels (Final Draft), Anon.IIW-X/XIII/XV-RSDP-71-02, Analysis of IIW X/XV RSDP Phase I Round-Robin Residual StressResults, Dong, P.; Hong, J.K.IX Creep-L-28-81, Reference To The Technical Literature Of The Metals And Ceramics Division April 1, 1981 Through June 30, 1981, Anon.IX Creep-L-31-81, Accelerated Testing Of Three Austenitic-Ferritic Superheater-Tube Transition Welds Under Simulated Two-Shift Conditions, Moles, M.D.C., Tinkler, M.J. and Westwood, H.J.IX Creep-L-32-81, Ontario Hydro Experience With Dissimilar Metal Welds In Boiler Tubing, Dooley, R.B., Stephenson, G.G., Tinkler, M.J., Moles, M.D.C. and Westwood, H.J.IX Creep-L-33-81, Testing Austenitic-Ferritic Superheater Tube Transition Welds Under Combined Two-Shifting And Bending Stresses, Moles, M.D.C., Tinkler, M.J. and Westwood, H.J.IX Creep-L-34-83, Reference To The Technical Literature Of The Metals And Ceramics Division July 1, 1982, Through September 30, 1982, Anon.IX Creep-L-35-83, Reference To The Technical Literature Of The Metals And Ceramics Division October 1, 1982, Through December 31, 1982, Anon.IX Creep-L-36-83, Reference To The Technical Literature Of The Metals And Ceramics Division January 1, 1983 Through March 31, 1983, Anon.IX-1000-76, Etude Des Principaux Parametres Influencant La Striction Dans Le Sens De L'Epaisseur Des Toles Fortes. Exemples De Realisations Industrielles De Toles Z, Blondeau, R., Falce, J., Pont, G., Gavart, A. and Dollet, J.IX-1008-76, Questionnaire On Cases Of Fractures By Lamellar Tearing In Service Or During Fabrication, Anon.IX-1012-76, The Groove Shape Influence On The Sensitivity Of Technological Butt Weld Cold

Page 59

Cracking Test Specimens, Kalev, L., Velkov, K. and Christov, St.IX-1013-76, On The Possibility Of Using The Restraint Intensity In The Evaluation Of Technological Weld Cold Cracking Test Specimens, Kalev, K., Velkov, K. and Christov, St.IX-1017-77, Raccordement De Canalisations Par Soudage Sous-Marin En Condition Hyperbare, Lallier, L., Berthet, P., Gaudin, J.P., Charoulet, E., Le Canne, P. and Quere, J.IX-1018-77, Effects Of Intensity Of Bending Restraint On Lamellar Tearing And Root Cracking In Corner Joint, Ueda, Y., Nishimura, I., Iiyama, H. and Chiba, N.IX-1019-77, Dynamical Characteristics Of Weld Cracking In Multipass Welded Corner Joints, Ueda, Y., Fukuda, K., Nishimura, I., Iiyama, H. and Chiba, N.IX-1020-77, The Effects Of Metallurgical Factors On Lamellar Tearing Susceptibility In Low Alloy High Strength Steels, Ito, Y., Ohmori, Y., Nakanishi, M. and Komizo, Y.IX-1021-77, Properties Of Low Silicon High Strength Steels, Ito, Y., Ikeda, M., Ohmori, Y., Ohtani, H. and Nakanishi, M.IX-1023-77, Study On Weld Cracking In Submerged-Arc Welding Of High Tensile Strength Steel -Transverse Cracking And Root Cracking-, Kishimoto, K., Indow, H., Ebata, M. and Ohtomo, M.IX-1024-77, Application Of Transformation Superplasticity For Prevention Of Weld Cracking InCast Iron, Tamura, H., Kato, N., Yokoi, S. and Ishii, Y.IX-1025-77, Delayed Failure Of High Strength Steels In Aqueous Environments, Saiga, Y., Fukagawa, M. and Ohyama, M.IX-1026-77, Weldability Of Microalloyed Steels, Wegrzyn, J.IX-1027-77, The Effect Of Minor Additions Of Vanadium And Niobium In The Submerged-Arc Weld Metal On Its Mechanical Properties And Resistance To Brittle Fracture, Wegrzyn, J. and Dziubinski, J.IX-1028-77, The Weldability Of Structural Steels. Evaluation Of Heat Affected Zone Properties, Marquet, F., Defourny, J., Marique, C., Lamberigts, M. and Bragard, A.IX-1029-77, Required Through Thickness Properties For Avoiding Lamellar Tearing In VariousJoint Types -IL Lamellar Tearing Working Group Report-, Inagaki, M., Tamura, H., Yamato, K.,Tanaka, K., Inoue, T. and Kitada, T.IX-1030-77, Proposal Of Displacement-Controlled Implant Test And Its Application To Cold Cracking In Actual Welded Joint, Satoh, K., Terasaki, T. and Takagi, O.IX-1031-77, Evaluation Of Cold Cracking Susceptibility Investigations By Steelmakers From Benelux, Marquet, F., Bragard, A., Fikkers, A.T. and Muller, T.IX-1034-77, Contribution To The Evaluation Problem Of The Residual Life Of Power Plant Steel Components (Comm. IX - WG CREEP - Doc. IX - CREEP 64/77), Cumino, G. and Rinaldi, F.IX-1036-77, Guide To The Welding And Weldability Of Quenched And Tempered CMn And Microalloyed Steels. Metallurgical Background, Granjon, H.IX-1037-77, Weldability Testing By The Implant Method. Summary Of A Final Technical Report From Svetskommissionen To Be Submitted To Nordic Fund For Technology And Industrial Development, Christensen, N.IX-1038-77, Properties Of Welds In Submerged Arc Welding, Bernard, G., Faure, F. and Maitrepierre, Ph.IX-1042-77, Classification And Choice Of Steels (C, C-Mn, And Microalloyed Steels) For Use In Welded Structures, Anon.IX-1043-77, Structural Stability Of Heat-Affected Zones In Welds Of 0.5% Cr - 0.5% Mo - .25%% V Steel, Jakobova, A., Foldyna, V., Tomasova, M. and Koukal, J.

Page 60

IX-1045-77, Plastic Properties Of Welded Joints Made From Steel Grade 2 1/4 Cr1Mo And Their Influence On Service Life And Reliability Of Construction Parts During Creep, Bina, V., Danek, R. and Libra, O.IX-1046-77, The Effects Of Alternating Heat And Cooling Down On Service Life Of Joints Between Dissimilar Materials, Sinal, J. and Zapletalek, A.IX-1047-77, Study On The Preheat Down Of Mn-Mo Thick Plate Weldment, Ujiie, A., Satoh, S., Shimoyama, J., Yoshimura, T., Mathuyama, T. and Hamada, T.IX-1049-77, Effects Of Niobium And Vanadium On Toughness Of Submerged-Arc Weld Metal / L'Effets De Nb Et V Sur La Tenacite Du Metal Fondu Par L'Arc Sous Flux, Shiga, A., Imura, H. and Tsuboi, J.IX-1056-88, An Approach For Determining The Internal Forces And Inherent Stresses In Procedure Test SEV-19-HT, Christov, S.IX-1057-77, Contribution On The Evaluation Of Implant Tests, Neumann, V. and Schonherr, W.IX-1064-77, Evaluation Of Lamellar Tearing Susceptibility By Tensile Test In Z Direction, Lombardini, J.IX-1067-77, Travaux Collectifs Sur L'Arrachement Lamellaire, Aubert, H., Bouleau, M., Laniesse, J., Lelong, Cl., Pigoury, M., Debiez, S., Bocquet, P. and Granjon, H.IX-1069-78, Weld Cracking Susceptibility Of HT80 Steel With Undermatching Electrode, Satoh, K., Toyoda, M., Ukita, K., Shimoda, R., Nakamura, A. and Matsuura, T.IX-1072-78, Effects Of Titanium-boron And Niobium Additions On The Mechanical Properties Of Submerged Arc Weld Metals, Homma, H., Mori, N., Saito, S. and Shinmyo, K.IX-1073-78, A New Submerged Arc Welding Flux For Offshore Structure In Arctic Use, Shinmyo, K., Saito, S., Mori, N., Takami, T. and Kono, R.IX-1074-78, Cold Cracking And Its Prevention In Steel Welding, Suzuki, H.IX-1075-78, Correlation Of Implant And RRC-Test Results Based Upon Local Stresses, Satoh,K. and Terasaki, T.IX-1076-78, Research On The Prevention Of Pull-Out Type Cracks In The Fillet Welded ZonesOf HT 50 Steel Used In The Ship Hull Construction, Satoh, M., Kuroki, M., Kajimoto, K. and Hirozane, T.IX-1077-78, Cryogenic Toughness Of SMA 308 and 316 Weld Metals, Anon.IX-1078-78, Application Of Implant Test On Cold Cracking, Inagaki, M., Satoh, K., Matsui, S. and Ohkuma, Y.IX-1079-78, High Heat-Input Submerged Arc Welding Of Steel With A Yield Point Over 350 N/mm2 For Heavy Engineering Applications, Bekkering, H.J., van Bemst, A., Bosman, A.W.M.and Pors, W.IX-1080-78, Transverse 45( Cracking -Chevron Cracking- In C-Mn And Low Alloy Weld Metals,Mota, J.M.F. and Apps, R.L.IX-1083-78, ISO/TC 17/WG 15 -Steel- Basic Rules For Specifying Impact Strength In Steel Specifications, Rosendahl, C.-H.IX-1084-78, Some Cold Cracking Formation Regularities In High alloyed Steels, Federov, V.G.IX-1085-78, Feather Formation - Visualization Of The Plastic Deformation Zone Next To A Weld, Geerlings, H.G., Kapteijn, J. and Versluis, N.H.R.IX-1086-78, The Relevance Of Test Methods For Lamellar Tearing, Granstrom, A.IX-1092-78, Investigations On The Susceptibility To Stress Relief Cracking Of 22NiMoCr37 Steel, Hrelescu, M., Safta, V., Pascu, R. and Moisa, T.IX-1100-79, Study On Toe Cracking At A Fillet Welded Joint Of Mild Steel, Kuriyama, Y.,

Page 61

Minoda, K., Kohno, T., Murayama, T. and Nakanishi, Y.IX-1101-78, Comments On The Implant Testing Procedure, Karppi, R.A.J.IX-1102-78, HAZ Hardness And Carbon Equivalents Predicting The Implant Fracture Strength,Karppi, R.A.J.IX-1103-78, Effect Of Hydrogen Content, Preheat Temperature And Cooling Conditions On Cold Cracking Of Some Heat Resisting Steels, Karppi, R.A.J.IX-1106-79, Carbon Pick-Up In Weld Metal Resulting For Air Carbon-Arc Gouging A Practical Welding Program, de Koning, A.C., Boltje, G.W. and Geerlings, H.G.IX-1107-79, Hot Corrosion And Creep Problem Of Type 316 Stainless Steel And Its WeldmentFor Power Plant Boilers, Saito, Y. and Shoji, T.IX-1109-79, The Effect Of GMA-Welding Parameters And Alloying Elements On The Hydrogen Induced Cracking In Low Carbon Cr-Steel, Koivula, J.IX-1110-79, Cold Cracking And Its Prevention In Steel Welding (Report 2 Root Cracking), Suzuki, H.IX-1111-79, Effect Of Electromagnetic Stirring On Weld Solidification Structure Of Aluminum Alloys (Report II) -Investigation On GTA In SCSP Weld Metal Of 8mm Thick Plate-, Matsuda, F., Nakata, K., Miyanaga, Y., Kayano, T. and Tsukamoto, K.IX-1112-79, The Combined Influences Of Chromium And Molybdenum On Stress Relief Cracking, Tamaki, K., Suzuki, J. and Kojima, M.IX-1113-79, A Study On Hot Ductility Of Simulated Weld Metals, Homma, H., Mori, N. and Asano, K.IX-1114-79, Effects Of Chemical Compositions Of Base Metal On Susceptibility To Hot Cracking In Austenitic Stainless Steel Welds, Morishige, N., Kuribayashi, M. and Okabayashi, H.IX-1116-79, Mechanical Properties Of Cr-Mo Steels After Elevated Temperature Service Presented At The IIW 32nd Annual Assembly 1979 In Bratislava, Czechoslovakia, Watanabe, T. and Sato, K.IX-1117-79, The Mechanical Properties Of The Gas Metal Arc Welded Pure And Low Alloyed Coppers At High Temperature, Hosoda, T., Morikawa, M. and Yoshida, H.IX-1119-79, Lamellar Tearing In Austenitic Steels, Hrivnak, I.IX-1120-79, Proposal Of Steel Weldability Indices In Material Certificates Of Standards, Hrivnak, I.IX-1121-79, The Study Of Reheat Cracking In Low Alloy Steel Welded Joints, Hrivnak, I. and Magula, V.IX-1122-79, Draft For Testing Steel Susceptibility To Hydrogen Induced Cracks In Welding With Simulation Of Welding Thermal Cycles, Remias, S. and Hrivnak, IIX-1124-79, The Properties Of Flash Welded Overheater Tubes Made Of 17Cr/12Ni/2Mo Steel, Lipa, M., Dolezal, J., Sobotka, J., Bobek, J., Tomasova, M. and Dolenek, J.IX-1125-79, The Influence Of Welding Upon The Occurrence Of Structural Types Of CorrosionIn Austenitic Steels, Lehka, N. and Malik, K.IX-1126-79, Effect Of Welding Speed On The Hot-Cracking Sensitivity Of Aluminium Alloys, Buray, Z. and Morotz, M.IX-1127-79, Influence Of Widmanstatten Ferrite On Mechanical Properties Of Microalloyed Steels, Otterberg, R., Sandstrom, R. and Sandberg, A.IX-1128-79, An Analysis Of Deformation Behaviour Of Welded Joints In The Presence Of Type II MnS Inclusions, Krishnan, R.G.IX-1136-79, Research On Formation-Mechanism Of Reheat Cracking With 18MnMoNb Steel

Page 62

And Provisions Of Prevention, Ying-Shu, W., Dong-Tu, L and Mei-Ling, Qu.IX-1137-79, A Reprint From Pressure Vessels And Piping. A Review Of Work Related To Reheat Cracking In Nuclear Reactor Pressure Vessel Steels, Dhooge, A., Dolby, R.E., Sebille,J., Steinmetz, R. and Vinckier, A.G.IX-1142-79, Metallurgical And Constructional Measures For The Prevention Of Lamellar Tearing In Welded Structures, Schonherr, W.IX-1148-80, The Welding Of 18% Cr-2% Mo Ferritic Stainless Steels With Low Interstitial Element Contents, Anon.IX-1149-80, Application Of Al-Mg Alloys To Large Welded Structures In Japan, Mizuno, M. and Nagaoka, H.IX-1151-80, Effects Of Testing Parameters And Standardization In Implant Cracking Test In Japan, Tanaka, J., Araki, T., Terasaki, T., Seriu, N., Kitada, T., Hirai, Y., Komizo, Y., Ohkuma, Y. and Onuma, T.IX-1152-80, On The Required Through Thickness Properties For Avoiding Lamellar Tearing -I.L Lamellar Tearing Working Group Report-, Inagaki, N., Tamura, H., Yamato, K., Tanaka, J.,Inoue, T. and Kitada, T.IX-1153-80, Japanese Comment On IIW Doc. IX-1142-79 Metallurgical And Constructional Measures For The Prevention Of Lamellar Tearing In Welded Structures, Inagaki, N., Tamura,H., Yamato, K., Tanaka, J., Kitada, T., Hirai, Y. and Inoue, T.IX-1154-80, Current Situation Of The Use Of QT High Strength Steels In Japan (II), Suzuki, H., Sakai, T. and Moriyama, K.IX-1155-80, Improvement Of HAZ Toughness Of An Al-Killed Steel With Multi-Electrode AC-MIG Arc Welding, Ito, Y., Nakanishi, M., Kitagawa, Y. and Seta, I.IX-1156-80, Effect Of Martensite-Austenite Constituent On HAZ Toughness Of A High Strength Steel, Ikawa, H., Oshige, H. and Tanoue, T.IX-1157-80, Cold Cracking And Its Prevention In Steel Welding (Report 3. Effects Of Heat Input And Restraint), Suzuki, H.IX-1158-80, The Behavior Of B And N In Notch Toughness Improvement Of Ti-B Bearing Weld Metals, Mori, N., Homma, H., Okita, S. and Asano, K.IX-1159-80, Effect Of Molybdenum Carbide On Reheat Cracking Sensitivity Of Cr-Mo Steels, Tamaki, K., Suzuki, J. and Nakaseko, Y.IX-1160-80, Effects Of Sulphur On Hydrogen-Assisted HAZ Cracking In Al-Killed Steel Plates, Hirai, Y., Minakawa, S. and Tsuboi, J.IX-1161-80, An Analysis Of The Effects Of Micro-Structure, Strain And Stress On The Hydrogen Accumulation In Weld Heat-Affected Zone, Yurioka, N., Ohshita, S., Nakamura, H. and Asano, K.IX-1162-80, The Reheated Zone Toughness Of High-Strength Multipass Weld Metal, Kikuta, Y., Araki, T., Yoneda, M., Yoshiada, H. and Kabata, H.IX-1164-80, The Metallurgical Properties Of Electroslag Weld Metal Using CeF3 Addition Wire, Kikuta, Y., Araki, T., Honda, K., Sakahira, S. and Ohno, M.IX-1165-80, Microscopic Redistribution Behaviors Of Hydrogen And Fracture Morphology Of HAZ Cold Cracking In High Strength Steel, Kikuta, Y. and Araki, T.IX-1166-80, Some Properties On Stress Corrosion Crack Propagation Of Type 304 Stainless Steel Weld Metal In Boiling 42 Percent Magnesium-Chloride Solution, Mukai, Y. and Murata, M.IX-1167-80, Mechanical Properties Of Cr-Mo Steels After Elevated Temperature Service (Part II) Presented At IIW 33rd Annual Assembly 1980 Lisboa/Estoril Portugal, Watanabe, T. and

Page 63

Sato, K.IX-1168-80, High Alloyed Marageing Steels Delayed Failure Regularities Under Welding, Federov, V.G.IX-1169-80, The Influence Of Silicon On The Mechanical Properties And On The Weldability Of Mild And High Tensile Structural Steels - Literature Survey And Own Experimental Studies, Hannerz, N.E.IX-1175-80, Review Of Work On The Influence Of Nb On The Microstructure And Toughness Of Ferritic Weld Metal, Dolby, R.E.IX-1177-80, On The Corrosion Behavior Of Welds In The Alloy AlZnMg 1, Pirner, M. and Bichsel, H.IX-1178-80, Complementary Information Test For Lamellar Tearing, Anon.IX-1179-80, Recent Experience In The Welding Of Low-Copper AlZnMg-Type Alloys, Pirner, M.IX-1180-80, The Influence Of Parent Material Aluminium Content On Microstructure, Inclusion Distribution, And Mechanical Properties Of Submerged-Arc Weld Metal, Hannerz, N.E. and Werlefors, T.IX-1181-80, Fractographic Analysis Of Aluminium Alloy Weld Hot Cracking, Hongqi, L.IX-1183-80, On The Post-Weld Stress-Relief Cracking Assessment On Cr-Mo-V Low All Steel,Cioclov, D., Pascu, R. and Farbas, N.IX-1185-80, Review Of Strength And Toughness Of Ti And Ti-B Microalloyed Deposits, Tsuboi, J. and Terashima, H.IX-1190-80, The Numerical Simulation Of Austenite Transformation In Welding, Demtshenko, V.F., Seyffarth, P., Schmidt, R., Abdullach, V. and Berg, G.IX-1191-81, Stress Field Parameter For Weld Hydrogen Cracking Problems, Karppi, A.J., Toyoda, M. and Satoh, K.IX-1192-81, New Al-7%mg Welding Electrode For Crackless Welding Of Al-Zn-Mg (7NO1) High Strength Aluminium Alloy (Report I) -Investigation On Weld Solidification Crack Susceptibility-, Nakata, K., Miyanaga, Y., Matsuda, F., Tsukamoto, K. and Arai, K.IX-1195-81, A New Cracking Parameter For Welded Steels Considering Local Accumulation Of Hydrogen (Cold Cracking And Its Prevention In Steel Welding, Rep. IV), Suzuki, H., Yurioka, N. and Okumura, M.IX-1196-81, Mechanism Of Notch Toughness Improvement In Ti-B Bearing Weld Metals, Mori,N., Homma, H., Okita, S. and Wakabayashi, M.IX-1197-81, Application Of Aluminium Alloys To Large Welded Structures In Japan, Mizuno, M. and Nagaoka, H.IX-1199-81, The Welding Of Austenitic-Ferritic Mo-Alloyed Cr-Ni Stainless Steel, van Nassau, L.IX-1200-81, Welded Joints Between Stainless And Low Alloy Steels: Current Position, Faber, G. and Gooch, T.IX-1206-81, Mise En Evidence De La Micro-Repartition Du Soufre En Zone Fondue Des Soudures Par Micro-Empreinte Baumann A Haute Resolution / Detection Of Sulphur Micro-Distribution In The Weld Metal Zone With High Resolution Sulphur Micro-Print, Dadian, M., Bensalah, N., Boucher, C., Moulin, G. and Aucouturier, M.IX-1207-81, Hyperbaric Welding. Effect Of Pressure On The Composition Of The Deposited Metal, Gaudin, J.P.IX-1208-81, Comparison De Resultats D'Essais Sur Implants, Obtenus Avec Entailles Droite Et Helicoidale, Debiez, S.

Page 64

IX-1209-81, Correlation Entre Essais Sur Implants Et Essais Sur Assemblages Brides, Debiez,S. and Gerard, P.IX-1210-81, La Solidification Des Soudures Synthese Des Connaisances Actuelles, Dadian, M.IX-1213-81, Review Of Work On The Influence Of Vanadium On The Microstructure And Toughness Of Ferritic Weld Metal, Dolby, R.E.IX-1214-81, Atlas Of Weld Metal Microstructures. Volume 1 - Submerged Arc Welds In Ferritic Steels, Dolby, R.E.IX-1215-81, Correlation Between Implant Test And Restraint Test, Karppi, R., Ruusila, J., Rajamaki, J. and Vartiainen, K.IX-1216-81, Bendability And Fatigue Strength Of Shell-To-Annular Fillet Welded Joint In LargeOil Storage Tank, Uchida, M., Naitoh, K. and Yoshida, K.IX-1217-81, Reheat Cracking In SA Weld Metals, Hrivnak, I., Malinovska, E. and Jilek, V.IX-1218-81, Metallurgie Et Proprietes Mecaniques Du Metal Fondu En Soudage Automatique Sous Flux Solide, Devillers, L., Riboud, P.V., Bouleau, D., Kaplan, D. and Lombry, R.IX-1224-82, A First Report On Welding Diagram, Ashby, M.F. and Easterling, K.E.IX-1225-82, Investigations Concerning The Influence Of Weld And Post-Weld Thermal Cycles On The Copper Alloyed Steels, Morariu, S., Pascu, R., Farbas, N. and Moisa, T.IX-1227-82, Guide To The Welding And Weldability Of Rearlite - Reduced And Pearlite - Free Steels, Hrivnak, I.IX-1228-82, Calculation Of Structural Transformations In Welding Process, Seyffarth, P. and Kassatkin, O.G.IX-1230-82, Carbon Equivalent For Steel Weldability, Suzuki, H.IX-1231-82, Assessment Of Solidification Cracking Test For Aluminum Alloy Welds, Matsuda, F., Nakata, K., Arai, K. and Tsukamoto, K.IX-1232-82, Prevention Against Cold Cracking By The Hydrogen Accumulation Cracking Parameter PHA (I), Suzuki, H. and Yurioka, N.IX-1233-82, Background And Status Of Creep-Rupture Data On 304SS Weldments In NRIM Creep Data Sheet Programs, Yokoi, S.IX-1234-82, Data Sheets On The Elevated-Temperature Properties For Base Metal, Weld Metals And Welded Joints Of 18Cr-8Ni Stainless Steel Plate (SUS 304-HP), Anon.IX-1235-82, Weldability Of 18 PCT Chromium Ferritic Stainless Steel Stabilized With Titanium,Sato, S., Shimoyama, T., Matsumoto, O., Kawaguchi, S., Urabe, M. and Kamiya, T.IX-1236-82, Weld Cracking In Multipass Welded Corner Joint, Ueda, Y., Fukuda, K., Nishimura, I., Iiyama, H. and Chiba, N.IX-1237-82, Electron Beam Weldability Of Heavy Section Steel Plates, Nakanishi, M., Furusawa, J., Yasunaga, S., Tomie, M. and Arata, Y.IX-1238-82, Improvement Of Creep Cracking Susceptibility Of 1 1/4Cr - 1/2 Mo Steel Welds, Nakanishi, M., Watanabe, S. and Furusawa, J.IX-1239-82, Fracture Toughness And Tensile Properties Of Electron Beam Welds In Ti-6Al-4VAlloy, Obata, Y., Mori, Y., Aoki, K., Nakanose, M., Kakimi, T., Nakazaki, T., Kita, H. and Kishi, T.IX-1240-82, Cold Cracking Test. Methods Using Implants, Christensen, D.IX-1241-82, Experimental Methods For Studying Cold Cracking Sensitivity Of Interfaces In Welds Between Dissimilar Metals, Palengat, R., Roux, F., Bocquet, P. and Delafin, M.IX-1243-82, Influence Of Center-Line Segregation On Weldability Of Continuous Casting Rolled Material, Schonherr, W.

Page 65

IX-1244-82, The Hydrogen Influenced Cold Cracking Tendency Of Low Alloyed High Strength Steels-Evaluated By The Implant-Test, Neumann, V., Florian, W. and Schonherr, W.IX-1246-82, Review Of Strength And Toughness Of Ti And Ti-B Microalloyed Deposits, Tsuboi, J. and Terashima, H.IX-1247-82, Compendium Of Weld Metal Microstructures And Mechanical Properties. Volume1 - Submerged Arc Welds In Ferritic Steels, Anon.IX-1248-82, Weld Metal Microstructures - A State-Of-The-Art Review, Cochrane, R.C.IX-1252-82, Thermal Cycles In Single And Multi-Wire Fusion Welding, Beckert, M. and Herold,H.IX-1255-82, Newly Published Specifications For Lamellar Tearing In Japan, Inagaki, M., Watanabe, M., Miura, K., Oura, M., Nakagawa, Y., Hirose, H., Yamato, K. and Inoue, T.IX-1260-82, Methodes D'Essais De Fissuration A Froid Sur Implants, Anon.IX-1264-82, Welding Of Amorphous Metals And Amorphous Metals With Crystallized Ones, Kocjancic, B.IX-1272-83, Creep-Rupture Properties Of SAW Joints Of Type 304 Stainless Steel For FBR Vessel, Monma, Y., Yamazaki, M. and Yokoi, S.IX-1273-83, HAZ Cracking Of Al-Mg-Si Alloys, Tsujimoto, K., Sakaguchi, A., Kinoshita, T., Tanaka, K. and Sasabe, S.IX-1274-83, Welding Of Aluminium Castings, Mizuno, M. and Matsumoto, J.IX-1275-83, Improvement Of Solidification Cracking Susceptibility Of Austenitic Type 316 Stainless Steel By Adding Rate Earth Metals, Nakao, Y. and Katsu, S.IX-1276-83, Effect Of Boron On The Pitting Corrosion Resistance In HAZ Of Duplex Type 329J1 Stainless Steel, Nakao, Y., Nishimoto, K. and Horii, H.IX-1277-83, Development Of Low Carbon 11/4 Cr - 1/2Mo Steel For Feed Water Heater Of Steam Power Plants, Yamaguchi, Y. and Matsumoto, T.IX-1279-83, Carbon Equivalent And Maximum Hardness, Suzuki, H.IX-1280-83, Root Cracking And Maximum Hardness In High-Strength Steel Welds, Suzuki, H.IX-1283-83, On Compositional Change Among Passes In Multi-Pass Submerged Arc Welding,Kohno, R. and Miyakawa, I.IX-1285-83, The Welding Of Cylinders Lind With Anti-Erosion Alloys, Sawada, T. and Furuichi,Y.IX-1286-83, Structural Transformations And Changes Of The Mechanical Properties In The HAZ Of The 12H1MF Weldable Heat-Resistant Steel, Pascu, R., Fleser, T. and Pascu, M.IX-1287-83, Graphical Determination Of The Dilution At Submerged ARC-STRIP Cladding, Popovits, D. and Subu, T.IX-1288-83, Postweld Heat Treatment Of Stainless Steels And Nickel Alloys In Thick Sections,Van Bemst, A.IX-1296-83, Note On Standardization Of Implant Test, Karppi, R., Ruusila, J., Satoh, K., Toyoda, M. and Vartianinen, K.IX-1297-83, Stress Corrosion Cracking Of Welded Austenitic Stainless Steel, Gooch, T.G.IX-1298-83, Weld Metal Properties As Influenced By The Deoxidation Practice Of The Structural Steel Base Material, Hannerz, N.E.IX-1305-83, Guide To The Metallurgy Of Welding And Weldability Of Low Carbon MicroalloyedHot Rolled Steels, Salkin, R.V.IX-1306-84, Comparison Of Carbon Equivalents For Steel Weldability, Suzuki, H.IX-1307-84, Metallurgy Of Heat Treatment Of Welded Joints, Hrivnak, I.IX-1308-84, The Influence Of Steel Cleanliness On HAZ Hydrogen Cracking: The Present

Page 66

Position, Hart, P.H.M.IX-1309-84, Hardness Testing In The Heat Affected Zone Of Steel Welds, Videau, J.P.IX-1310-84, Guide To The Welding And Weldability Of Cryogenic Steels, Salkin, R.V.IX-1311-84, Revised Cold Cracking Parameter PHA And Its Applications, Suzuki, H.IX-1312-84, Comparison Between Implant Test And JIS-y (Tekken) Test, Suzuki, H., Okumura, M. and Namura, M.IX-1313-84, Impact Of Welding Research On Steel Composition Development, Yurioka, N., Koike, M., Mori, N. and Nagano, K.IX-1314-84, New HT50 Steels For Marine And Offshore Constructions With Superior Weldability, Suzuki, H., Sogo, Y., Iwanaga, K., Yamaba, R., Maeda, K. and Ohno, Y.IX-1315-84, Effect Of Alloying Elements On Solidification Crack Resistance Of Austenitic Stainless Steel Weld Metals, Matsuda, F., Nakagawa, H. and Katayama, S.IX-1316-84, Effect Of Welding Positions On The Variation Of Delta Ferrite Content And Cryogenic Toughness Of The 308L SMA Weld Metals, Watanabe, K., Aihara, T., Watanabe, T., Fukuda, K., Nakamura, M. and Homma, H.IX-1317-84, Weldability Of Low Carbon High Strength Line Pipe Steels, Akao, K., Taira, T., Kitada, T., Hirabayashi, K. and Nakagawa, H.IX-1318-84, Study On The Prevention Of Weld Cracking Of 405 Stainless Clad Steel, Ohmae, T., Yoshida, Y., Wakamoto, I. and Momose, M.IX-1319-84, The Welding Of Austenitic CrNi-Stainless Steels With High Mo-Content For Seawater Applications, Rabensteiner, G.IX-1321-84, A Review On Reversible Temper Embrittlement In Cr-Mo Steel Weld Metals, Komizo, Y.IX-1322-84, Oxygen And Its Role In Determining Weld Metal Microstructure And Toughness - A-State-Of-The-Art Review, Ahlblom, B.IX-1323-84, Identification And Quantitative Description Of Ferritic Steel Weld Metal Microstructure - Interim Report, Pargeter, R.J. and Dolby, R.E.IX-1324-84, Recommendation For The Classification Of A Low Carbon Microalloyed StructuralSteel For The Offshore Fixed Structures At Low Temperatures (Draft 2), Anon.IX-1326-84, A Second Report On Diagrams On Microstructure And Hardness For Heat-Affected Zones In Welds, Ion, J.C., Easterling, K.E. and Ashby, M.F.IX-1334-84, Determination Of The Welding Conditions To Avoid Cold Cracking By Means Of The C.R.M. Model, Bragard, A., Defourny, J. and Marquet, F.IX-133-86, Degradation Mechanisms Of Welded Joint Properties, Bosansky, J.IX-1339-84, Effect Of Weld Metal Composition And Welding Conditions On A (-Ferrite And CVN Toughness Of Austenitic-Ferritic Weld Metal, Hoffmeister, H., Mundt, R. and Berner, K.D.IX-1345-85, Weldability Study Of Laboratory Low-Carbon Steels, Dispersion Hardened By Globular Oxides, Hrivnak, I.IX-1346-85, Mathematical Evaluation Of Steel Susceptibility To Reheat Cracking, Hrivnak, I., Magula, V., Zajac, J. and Smida, T.IX-1347-85, Study On Reheat Cracking Of Ni-Base Superalloy, Waspaloy, Nakao, Y.IX-1348-85, Desensitization Of Stainless Steels By Laser Surface Heat-Treatment, Nakao, Y. and Nishimoto, K.IX-1350-85, An Investigation Of The Effect Of Phosphorus Content On Weld Hot Cracking Of Alloy 800, Saito, K., Aoki, M., Mineura, K., Kondo, H. and Ikeda, N.IX-1352-85, Study On Welding Under Pulsating Stress In Service Condition, Nakanishi, Y., Nakamura, Y., Murayama, T., Sakai, K., Kohno, T. and Kamijoh, T.

Page 67

IX-1355-85, The Microstructure And Mechanical Properties Of Narrow Gap Welds In 2.25 Cr-1Mo Steel, Chandel, R.S., Orr, R.F., Gianetto, J.A., McGrath, J.T., Patchett, B.M. and Bicknell, A.C.IX-1356-85, Equations For The Prediction Of Cold Cracking Resistance In Field-Welding Large-Diameter Pipes, Duren, C.IX-1357-85, Guide For The Welding And Weldability Of Reinforcing Steels For Concrete Structures, Defourny, J. and Bragard, A.IX-1359-85, Status Report Of The Working Group Influence Of Stress Relief Heat Treatment Of Commissions IX and X -1985, Hrivnak, I.IX-1361-85, Annual Report SC-IX-F 1984-1985, de Meester, B.IX-1362-85, Annual Report 1985 Of The Sub-Commission IX-G, IX-1363-85, Annual Report SC IX-H 1984/85, Van Bemst, A.IX-1364-85, Annual Report SC IXJ 'Metallurgical Studies Of Fused Metal', Dolby, R.E.IX-1366-85, Annual Report Of The Working Group: Non Ferrous Metals Of Commission IX, Hoffmeister, H.IX-1367-85, A Review Of Stress Corrosion Cracking Of Welded Duplex Ferritic/Austenitic Stainless Steels, Gooch, T.G.IX-1369-85, Concept And Procedure Description Of The IRC Test For Assessing Hydrogen Assisted Weld Cracking, Hoffmeister, H.IX-1371-85, Effects Of Ambient Pressure And Shielding Gas Flow On Hydrogen And Nitrogen Contamination Of Hyperbaric TIG And GMA Welds, Huismann, G., Hoffmeister, H. and Schafstall, H.G.IX-1372-85, Theoretical Simulation Of Heat Cycles In Aluminium Based Alloys - State Of The Art -, Maya, S.K. and Kim, J.I.IX-1374-85, A Short Review Of Weld Metal Hydrogen Cracking, Graville, B.IX-1375-85, The Effects Of Carbon On Weld Metal Microstructure And Properties. A State Of The Art Review, Vuik, J.IX-1378-85, Draft Agenda Of Our Meetings In Strasbourg, Which Shall Be Held From Tuesday3 To Friday 6 September 1985, Salkin, R.V.IX-1379-85, The Classification And Evaluation Of Hot Cracking Tests For Weldments, Wilken, K. and Kleistner, H.IX-1380-85, Guidelines For Improving Welded Joint Toughness At Arctic Temperatures, Tihekari, H. and Karppi, R.IX-1385-86, The Effects Of PWHT On The Toughness Of Shielded Metal Arc Weld Metals ForUse In Canadian Offshore Structural Fabrication, Braid, J.E.M. and Gianetto, J.A.IX-1387-86, Effects Of Alloying Elements And Heat Treatment Conditions On Mechanical Properties Of Heat Treated Submerged Arc Weld Metal, Yamaguchi, T., Matsuyama, J. and Nishiyama, N.IX-1388-86, On Formation Of Porosity In Underwater Weld Metal (The 1st Report) -Effect Of Water Pressure On Formation Of Porosity-, Suga, Y. and Hasui, A.IX-1389-86, Pitting Corrosion And Measuring Microscopically Local Corrosion Potential In Welds Of Austenitic Stainless Steels, Watanabe, T., Ei, K. and Nakamura, H.IX-1390-86, Creep-Rupture Properties Of GTAW And EBW Joints Of 304 Stainless Steel, Monma, Y., Yamazaki, M., Hongo, H., Watanabe, T. and Tanaka, C.IX-1391-86, The Effect Of The Nitrogen Absorption Of The TEM Structure Of SUS304L Austenitic Stainless Steel Weld Metal, Kuwana, T., Kokawa, H. and Tsujii, H.IX-1392-86, Oxygen Absorption And Oxide Inclusion Of Iron Weld Metal During Arc Welding,

Page 68

Kuwana, T. and Sato, Y.IX-1393-86, Microcracks In High Current MIG Welding Of Aluminum Alloy And Their Preventions, Matsumoto, S., Nagaoka, H. and Irisawa, T.IX-1394-86, The Mechanism Of Under-Bead Microcracking In Nickel Alloy Weld Metals, Morishige, N. and Okabayashi, H.IX-1396-86, Effect Of Ferrite Content On Mechanical Properties And Corrosion Resistance Of Cast Duplex Stainless Steels, Matsumoto, O., Kawaguchi, S., Nagano, T. and Ohashi, M.IX-1397-86, The Effect Of Zirconium On The Bending Ductility Of The Overlay Weld Of The Low Interstitial Ferritic Stainless Steel, Nakao, Y., Nishimoto, K., Noi, S., Hara, Y. and Tsukahara, H.IX-1398-86, Influence Of Nitrogen On The Structure And Low Temperature Impact Properties Of 304 Type Austenitic Stainless Steel Weld metals By SMAW Process, Enjo, T., Kikuchi, Y. and Moroi, H.IX-1399-86, Behavior Of Oxide Film In Diffusion Bonding Of Aluminum, Enjo, T., Ikeuchi, K. and Furukawa, K.IX-1400-86, Effect Of Minor Alloying Elements On Corrosion Resistance Of Al-Zn-Mg Alloy Welds, Enjo, T., Kuroda, T. and Kanamitsu, S.IX-1401-86, Effect Of Copper Addition On Corrosion Resistance Of Commercial Al-Zn-Mg Alloy Welds, Enjo, T. and Kuroda, T.IX-1402-86, Combined Effect Of Current Pulsation And Zr Addition On Improvement Of Solidification Cracking Of Al-Zn-MG Alloy Weld Metal -Effect Of Additional Element On Weld Solidification Crack Susceptibility Of Al-Zn-Mg Alloy-, Matsuda, F., Nakata, K., Tsukamoto, K. and Johgan, S.IX-1403-86, Cold Cracking Susceptibility And Its Improvement Of Weld Metals In Hy-Type Strength Steels, Matsuda, F., Nakagawa, H. and Shinozaki, K.IX-1404-86, Cold Cracking Phenomenon In Welding Steel In The Arctic Climate, Yamasaki, Y.and Kitada, Y.IX-1405-86, The Effect Of Center Segregation Of Continuously Casted TMCP Steels On WeldCold Cracking, Kikuta, Y., Araki, T., Hirose, A. and Xiu, J.Y.IX-1406-86, Hydrogen Induced Disbonding Of Austenitic Stainless Overlaid Weld Metal, Kikuta, Y., Araki, T. and Yoneda, M.IX-1407-86, Effect Of Some Parameters On Microcracks On Microcrackings In The Fillet WeldBetween The Lowest Course Shell Plate And The Annular Plate In Oil Storage Tank, Kikuta, Y., Araki, T., Yoneda, M. and Enomoto, M.IX-1409-86, Effect Of Restraint Stress On Crack-Initiating Temperature And Fracture Mode Of Reheat Cracking Of Cr-Mo Steels, Suzuki, J., Tamaki, K. and Kojima, M.IX-1410-86, Gas Absorption In Weld Metal Of Zirconium, Miura, M. and Ogawa, K.IX-1411-86, Carbide Precipitation And Corrosion Resistance In HAZ Of 15Cr-75Ni Alloy, Ogawa, K., Miura, M. and Minami, T.IX-1412-86, Standard For Weldable High Strength Steel Plates And Weld Cracking Material Parameter PCM, Inagaki, M., Ito, Y. and Komizo, Y.IX-1413-86, Study On The Critical CTOD Properties In The Heat Affected Zone Of C-Mn Microalloyed Steel, Nakanishi, M., Komizo, Y. and Fukada, Y.IX-1414-86, Improvement Of Toughness In Submerged Arc Weld Metal Of Thick Plates For Low Temperature Service, Nakanishi, M., Katsumoto, N., Kawai, K. and Tsumura, H.IX-1415-86, Improvement Of Hydrogen Attack Resistivity Of Cr-Mo Steel Plates, Furusawa, J.,Kushida, T., Shida, Y., Watanabe, S., Kudo, T. and Fujikawa, H.

Page 69

IX-1416-86, Weldability Of Duplex Stainless Steel, Ogawa, T. and Koseki, T.IX-1417-86, Estimating Critical Stress And Preheat Temperature To Avoid Cold Cracking In Implant And JIS-y (Tekken) Test, Suzuki, H. and Terasaki, T.IX-1418-86, A New Formula For Estimating HAZ Maximum Hardness In Welded Steel, Suzuki,H.IX-1419-86, Comparison Of Simulated HAZ Microstructure And Toughness For Two High-Strength Steels, Romhanyi, K., Krishnadev, M.R., McDonald, R.D., Bowker, J.T. and McGrath, J.T.IX-1420-86, Development Of Low Temperature Use Steel For Large Heat Input Welding, Ohno, Y., Okamura, Y., Uchino, K., Yamamoto, K. and Matsuda, S.IX-1421-86, Local Corrosion Of Welds Of High-Strength Steels In Seawater, Itoh, K., Mimura, H., Inoue, T., Todoroki, R., Horii, Y. and Kihira, H.IX-1422-86, Metallurgical Factors Controlling HAZ Toughness In HT80, Yamaba, R., Chiba, H., Gokyu, H. and Komai, T.IX-1423-86, Metallurgical Factors Controlling HAZ Toughness In HT50 Steels, Haze, T. and Aihara, S.IX-1424-86, Development Of HT-100 Steel For Heavy Sections Through The Application Of TMCP, Yano, S., Okamura, Y., Tanabe, K., Inoue, T., Horii, Y., Kawai, K. and Watanabe, N.IX-1425-86, Narrow Gap Hot-Wire Switching TIG (HS) Welds Of Heavy Section 9%Cr Steel And Stainless Steel Pipes, Tamura, K., Koyama, T. and Takuwa, T.IX-1426-86, Solution Of TiN During Synthetic Weld Thermal Cycling And Heat Affected Zone Toughness In Low Carbon Steels, Mukae, S., Nishio, K. and Katoh, M.IX-1428-86, CCT Diagram Data Base System By Interactive Personal Computer, Okada, A., Kasugai, T., Ei, K., Muramatsu, Y., Hiraoka, K. and Inagaki, M.IX-1429-86, First Use Of Large-Diameter Pipes Of The Steel GRS 550 TM (X 80) In A High Pressure Gas Pipeline, Engelmann, H., Engel, A., Peters, P.A., Duren, C. and Musch, H.IX-1430-86, A Case Of Reheat Cracking On HSLA Steel Weldments, Rak, I. and Gliha, V.IX-1431-86, Acoustic Emission Appearance During Forming Of Reheat Cracking, Rak, I. and Legat, J.IX-1432-86, Varestraint Testing Of Hot Cracking Sensitivity Of Nickel Base Alloys Claddings, Faure, F., Debiez, S. and Bourges, Ph.IX-1433-86, Experience In Production, Processing, And Application Of High-Strength, Water Quenched And Tempered Structural Steel XABO 90, Uwer, D. and Di(elmeyer, H.IX-1434-86, Determination Of Cold Cracking Susceptibility By PRRC Test, Wen-Yue, Z., Ze-Yu, D., Wen-Kao, H. and Bang-Gu, C.IX-1436-86, Idealized Thermal Cycle For Weld Heat Affected Zone Simulation Of Steel, Hannerz, N.IX-1437-86, Formulae For Calculating The Maximum Hardness In The Heat-Affected Zone Of Welded Joints, Duren, C.IX-1438-86, Effect Of Hydrogen Partial Pressure Of The TIG Process, Restraint And Welding Conditions On Hydrogen Assisted Weld Metal Root Cracking Of HSLA Steels In The IRC Test,Bretz, W. and Hoffmeister, H.IX-1440-86, Compositional Parameters For HAZ Cracking And Hardening In C:Mn Steels, Hart, P.H.M and Harrison, P.L.IX-1441-86, Aspects Metallurgique Et Mecanique De La Tenacite Des Zones Affectees Par LaChaleur, Devillers, L., Kaplan, D. and Jansen, J.P.IX-1442-86, The Significance Of Charpy V Energy And Ratio Rm/Re For Steel Structures,

Page 70

Defourny, J. and Bragard, A.IX-1451-86, Techniques For Examining Transformation Behavior In Weld Metal And HAZ. A State Of The Art Review, Akselsen, O.M. and Simonsen, T.IX-1453-86, Interim Report On Quantitative Description Of Weld Metal Macrostructure, Gretoft,B. and Svensson, L.-E.IX-1454-86, Commission IX Agenda, Salkin, R.V.IX-1456-86, Material Weldability Numbers From The Aspect Of Welding Residual Stress And Welding Deformation, Radaj, D.IX-1457-87, Combined Influence Of Sulfur And Manganese On Reheat Cracking Of Cr-Mo Steels, Tamaki, K., Suzuki, J. and Tate, H.IX-1458-87, Weldability Of Line-Pipe Steels And Prevention Of Cracking In Field Welding, Suzuki, H. and Yurioka, N.IX-1459-87, Effect Of Cleanliness Of Steel On Its Weldability, Okumura, M., Yurioka, N. and Kasuya, T.IX-1460-87, Grain Refinement Of Austenitic Stainless Steel Weld By Pulsed TIG Welding, Watanabe, T., Nakamura, H. and Ei, K.IX-1461-87, Hydrogen Embrittle Cracking In Duplex Stainless Steel Weld Metal, Miura, M. andOgawa, K.IX-1462-87, Effect Of Seam Weld Metal Chemistry On Field Weldability Of Line Pipe, Komizo, Y.-I. and Fukada, Y.IX-1463-87, Study On Prevention Of Hydrogen-Induced Disbonding In Austenitic Stainless Overlay Weld Metal, Ohmae, T., Yoshida, Y., Wakamoto, I., Kobayashi, T., Okamoto, Z. and Aoki, M.IX-1464-87, Development Of Gas Tungsten Arc Weld Metal For 3.5Ni-Cr-Mo-V Forged Steel, Shono, S., Shige, T., Murase, K., Fujii, H. and Shibanai, H.IX-1465-87, Residual Life Time Of Creep Loaded Structures - Results Of A Project Of The Netherlands Institute Of Welding, Etienne, C.F.IX-1467-87, Guidelines For Processing, Particularly For Fusion Welding Of Weldable Fine-Grained Structural Steels, Eisenhuttenleute, V.D.IX-1468-87, Effect Of Formation Of Intermetallic Compound On Liquid Zinc Embrittlement Of Steel, Ogawa, H., Ohmori, A. and Arata, Y.IX-1469-87, The Influence Of The Restrained Multipass Welding On The Toughness Near Weld Metal In The HAZ Of 15CrMoV Steel, Yongxing, Y., Yiangang, T. And Miaotao, L.IX-1475-87, Recommended Procedure For Welded Joints Of 2,25 Cr 1 Mo And 12 Cr 1 Mo 0,25 V Steel / 2,25 Cr 1 Mo And 16 Cr 13 Ni (Nb) Steel, Anon.IX-1476-87, Effects Of Rare-Earth Elements On Toughness Of Cr-Ni Austenitic Deposit At Cryogenic Temperature And Its Hot Cracking Susceptibility, Tan, W., Shou-Shan, Y., Ai-Qung,W., Bo-Yong, Y. and Ming-Ji, F.IX-1478-87, Annual Report Sc-IX-F 1986-1987, de Meester, B.IX-1479-87, Annual Report 1987 Of The Sub-Commission IX-G, Hrivnak, I.IX-1480-87, Annual Report SC IX-H 1986/87, Van Bemst, A.IX-1481-87, Annual Report Of SCIXJ (Sub-Commission IX-J), Dolby, R.E.IX-1483-87, Annual Report 1986/1987 If The WGNF / Comm. IX, Hoffmeister, H.IX-1484-87, Annual Report 1987 Of The Working Group Influence Of Stress Relief Heat Treatment Of Commission IX and X, Hrivnak, I.IX-1485-87, Guide To The Welding And Weldability Of CrMo And CrMoV Heat Resisting Steels. Second Draft, Hrivnak, I.

Page 71

IX-1486-87, Non-Metallic Inclusions In Ferritic Steel Weld Metals - A Review, Abson, D.J.IX-1487-87, The Influence Of Copper Content On Weld Metal Properties, Hannerz, N.E.IX-1488-87, A Review Of Reversible Temper Embrittlement In Cr-Mo Steel Weld Metals, Komizo, Y. and Pargeter, R.J.IX-1489-87, The Susceptibility To Hydrogen Induced Cracking Of Four HSLA Steels For Pressure Vessels, Changying, T., Zhaowei, Z. and Hongbin, C.IX-1490-87, Availability Of Implant Test For Assessing Hydrogen Induced Cracking In Submerged Arc Weldment, Changying, T., Zhaowei, Z. and Hongbin, C.IX-1491-87, A Study Of Cold Cracking Susceptibility Of HSLA Steel By Plate Rigid Restraint Cracking (PRRC) Test, Zhaowei, Z., Changying, T. and Chingguo, L.IX-1494-87, Solid State Phase Transformations In Steel During Welding, Gooch, T.G. and Hart, P.H.M.IX-1495-87, Methods For The Optimization Of The Preheat Temperature In Welding, Debiez, S., Gaillard, R., Hubert, H. and Defourny, J.IX-1497-87, List Of Documents As On 15 May 1987, Anon.IX-1498-87, Agenda Of The 1987 Annual Assembly Of Sofia, Salkin, R.V.IX-1499-87, Examination Of Qualification Of Welding Procedures With Regard To The Risk OfCold Cracking, Charleux, J.IX-1504-87, Annual Report 1987. Behavior Of Metals Subjected To Welding, Hrivnak, I.IX-1505-87, Large-Diameter Pipes Of Steel GRS 550 TM (X 80) In The 4th Transit Gas Pipeline In Czechoslovakia, Matousu, M., Skarda, Z., Beder, I., Lombardini, J., Schuster, H.G. and Duren, C.IX-1507-88, Recommendations For The Forming And Welding Of Steels Pipe For The Construction Of Long-Distance Pipelines, Baum, A., Behrens, H.-D., Duren, C., Ingelbrink, E.A., Koch, F.O., Rohde, W. and Wegmann, H.G.IX-1512-88, Annual Report SCIXJ (Sub-Commission IX-J), Anon.IX-1514-88, Annual Report 1988 Of The Working Group Influence Of Stress Relief Heat Treatment Of Commissions IX and X, Hrivnak, I.IX-1516-88, Breakdown And Repair Of Large Spherical Containers For Liquefied HydrocarbonGases, Hrivnak, I.IX-1518-88, Combined Influence Of Chromium, Molybdenum And Vanadium On Reheat Cracking Of Steels, Tamaki, K., Suzuki, J. and Kojima, M.IX-1519-88, Diffusion Bonding Of Superplasticity Of ( / ( Duplex Stainless Steel, Komizo, T.-I. and Maehara, Y.IX-1520-88, Weldability Of Large Diameter Grade X-80 And X-100 Line Pipe, Komizo, Y.-I. and Fukada, Y.IX-1521-88, Study On Welding Of High Strengthened Stainless Steel Type A-286, Sonoya, K.,Shinada, K. and Kawashima, I.IX-1522-88, Weldability Of Advanced 9Cr-1Mo Steel, Kume, R., Matsui, K. and Okabayashi, H.IX-1523-88, On Improving The Mechanical Properties Of Underwater Welded Joints By Postweld Heat Treatment, Suga, Y. And Hasui, A.IX-1524-88, Heat-Affected-Zone Hardness Of SAW Weld Metals, Yurioka, N., Horii, Y., Wakabayashi, M., Masui, H., Tamehiro, H. and Kimura, T.IX-1525-88, The Method For Hardness Measurement Of Welded Joints, Mraz, K. and Ondrus,M.IX-1526-88, Dissimilar Metal Weld Failure Reduction, Ryder, R.H., Viswanathan, R. and

Page 72

Roberts, D.I.IX-1528-88, The Method For Hardness Measurement Of Welded Joints, Mraz, K. and Ondrus,M.IX-1529-88, Crystallographic Characteristics Of Delta-Ferrite Transformations In A Type 304L Austenitic Stainless Steel Weld Metal At Elevated Temperatures, Kokawa, H., Kuwana, T. andYamamoto, A.IX-1533-88, Guide To The Light Microscope Examination Of Ferritic Steel Weld Metals, Anon.IX-1534-88, List Of Documents Of Commission IX-1988, Anon.IX-1535-88, Commission IX Annual Assembly Of Vienna. Agenda, Hrivnak, I.IX-1538-88, Hydrogen Cracking Sensitivity Of High Purity Off Shore Cast Steel In Welding, Koivula, J., Katila, R., Liimatainen, J. and Martikainen, H.IX-1540-88, Microstructures Of Weld Metals Of High-Strength Low-Alloy Steels, Shike, Y., Yishan, W. and Peilan, C.IX-1541-88, The Advent Of Steps On Cracks In The Welded Joint Transition Zones, Popov, V.V. and Ammosov, A.P.IX-1542-88, Classification Of Ferritic Steel Weld Metal Microstructure - Results Of A Fourth International Collaborative Exercise, Duncan, A.IX-1543-88, Effect Of High-Temperature Tempering On Structure And Properties Of Welded Joints Made Of Structural Steels, Khromchenko, F.A. and Brodskaya, G.L.IX-1548-88, Annual Report 1988 Commission X - Behavior Of Metals Subjected To Welding, Hrivnak, I.IX-1552-89, Weldability Of The Accelerated Cooled Plate Manufactured By PILAC Process, Kim, T.-U., Lee, J.-S., Lee, W.-S., Chang, R.-W. and Kim, T.-H.IX-1553-89, A Review Of Numerical Analysis On The Hydrogen Diffusion In Welding Of Steel, Yurioka, N.IX-1554-89, Analysis Of Three Dimensional Heat Conduction In Welding By Dispersed Point Heat Sources, Kasuya, T. and Yurioka, N.IX-1555-89, Effect Of Silicon On Oxygen Absorption By Steel Weld Metal During Arc Welding, Kuwana, T. and Sato, Y.IX-1557-89, Relationship Between The Delayed Fracture Process In Welds And The Kinetics Of Hydrogen Redistribution, Sleptsov, O.I., Mikhailov, V.E., Smijan, O.D. and Struchkova, G.P.IX-1558-89, Some Aspects Of Low-Alloy Steel Weldability, Larionov, V.P., Sleptsov, O.I. and Mikhailov, V.E.IX-1559-89, Effects Of Rapid Solidification By Laser Surface Melting On Solidification Modes And Microstructures Of Stainless Steels, Nakao, Y., Nishimoto, K. and Zhang, W.-P.IX-1560-89, Effects Of Carbon Content Of The Diffusion Bonding Of Iron And Steel To Titanium, Momono, T., Enjo, T. and Ikeuchi, K.IX-1561-89, Behavior Of Superficial Oxide Film In Diffusion Bonding Of Al-Mg-Si Series 6063 Alloy, Enjo, T., Ikeuchi, K. and Yoshikawa, H.IX-1562-89, Microstructure And Toughness In Weld Heat Affected Zone Of Ti-6Al-4V Alloy, Enjo, T. and Kuroda, T.IX-1563-89, Estimation Of Coating Quality By The Deposit Characteristics, Kobayashi, A., Habara, Y. and Arata, Y.IX-1564-89, Friction Welding Of Copper-Tungsten Sintered Alloy To Tough Pitch Copper, Aritoshi, M., Okita, K., Enjo, T. and Ikeuchi, K.IX-1567-89, Weldability Study On 3Ni-Cr-Mo Steel With High Strength Toughness, Ahn, S.-K., Chang, R.-W., Yoo, H.-C., Kim, Y.-W. and Baek, W.-H.

Page 73

IX-1568-89, Evaluation Of The Microstructure/Toughness Relationship Of Simulated Regions In HSLA Steel, Bowker, J.T., McGrath, J.T., Gianetto, J.A. and Letts, M.W.IX-1569-89, Prevention Of Blowhole In Arc Welding Of Galvanized Steel Sheets, Yasuda, K., Nakano, S., Yamaguchi, T., Komatsu, T. and Nakajima, T.IX-1570-89, Bonding Of Si3N4 To Metals With Active Filler Metals, Nakao, Y., Nishimoto, K. and Saida, K.IX-1571-89, Weldability Of High Strength Steels, de Simone, E.G.T., Joele, R. and Perdigao, S.C.IX-1572-89, Metallographic Study On The Regions Susceptible To Environment Assisted Cracking In A Welded Joint Of A Structural Steel, Strohaecker, T.R., Zeemann, A., Bastian, F.L. and Pope, A.M.IX-1573-89, Note On The Carbon Equivalent, De Meester, B.IX-1574-89, Effect Of Ultra-Low Sulfur Content On Cold Cracking For Carbon And Low AlloyedSteels, Bourges, Ph., Blondeau, R. and Cadiou, L.IX-1575-89, Influence Of Restraint On Weld Metal Hydrogen Induced Cracking, Alcantara, N.G. and Martins, S.H.IX-1576-89, Annual Report Of Sub-Commission IXA, Defourny, J.IX-1577-89, Physical Metallurgy Of Welding. Annual Report Of SC IX B 1988 - 1989, Dadian, M.IX-1578-89, Annual Report SC IX-H 1988/89, Van Bemst, A.IX-1581-89, Annual Report 1989 Of The Working Group Influence Of Stress Relief Heat Treatment Of Commission IX and X, Hrivnak, I.IX-1584-89, Behavior Of High Purity Cast Arctic Offshore Steel OS-690 Vaculok In Welding, Liimatainen, J.I., Koivula, J.J. and Martikainen, H.O.IX-1585-89, Possibilities Of Increasing Weldability And Strength By Optimum Alloying Of Carbon - Manganese - Silicon Steels, Frantov, I.I. and Nazarov, A.V.IX-1588-88, The Welding Of Fully Austenitic Stainless Steels With High Molybdenum Contents, Rabensteiner, G.IX-1588-89, Le Role Des Zones Fragiles Locales Vis A Vis De La Tenacite A L'Amorcage De Joints Soudes En Acier C-Mn, Devillers, L. and Kaplan, D.IX-1590-89, Annual Report 1989, IIW Commission IX - Behaviour Of Metals Subjected To WeldingIX-1592-90, Effects Of Brazing Temperature On Joint Properties Of SiC Fiber Reinforced Aluminum Alloy Matrix Composites, Morimoto, H., Tanaka, T., Saito, T. and Yamada, K.IX-1593-90, Effect Of Manganese On Oxygen Absorption By Steel Weld Metal During Arc Welding, Kuwana, T. and Sato, Y.IX-1594-90, Improvement In Bonding Strength Of Si3N4-Mo Joint By Controlling Reaction Layer Thickness, Nakao, Y., Nishimoto, K. and Saida, K.IX-1596-90, Microstructural Features Influencing The Notch Toughness And Dynamic Tear Fracture Resistance Of High Strength Weld Metals, Gianetto, J.A., Smith, N.J.G. and McGrath, J.T.IX-1597-90, Effect Of Welding On Corrosion Resistance Of Austenitic Stainless Steels, Hrivnak, I.IX-1598-90, The Effect Of Thermal Welding Conditions And Thermal Treatment On Serviceability Of Welded Joints Of Steel 20 Thinwall Pipelines Intended For Operation In The Corroding Medium, Korol'kov, P.M.IX-1600-90, Effects Of Composition Profiles On Metallurgy And Corrosion Behavior Of Duplex

Page 74

Stainless Steel Weld Metals, Ogawa, T. and Koseki, T.IX-1601-90, Phase Estimation Using Microhardness Measurements, Brown, P. and Bird, J.IX-1602-90, Comparison Of Methods For Determining Welding Procedure For The Avoidance Of Hydrogen Cracking During Fabrication: A Note On Progress, Hart, P.H.M., Pargeter, R.J. and Wright, M.D.IX-1604-90, An Effective Method For The Evaluation Of Solidification Crack Susceptibility Of Weld Metals, Sun, Z. and Han, H.Y.IX-1605-90, Microstructure And Post-Weld Heat Treated Mechanical Properties Of C-Mn-Ni Steel MIG/MAG Weld Metal, Abson, D.J.IX-1606-90, Literature Data Concerning The Problem Of Local Brittle Zones (LBZS), D'Haeyer,R. and Defourny, J.IX-1607-90, A Metallurgical Approach Of The Parameters Affecting The Fracture Behaviour OfBase Metal And Welded Components, Defourny, J., D'Haeyer, R. and Leroy, V.IX-1609-90, Hardness Measurement In Underbead HAZ Of Single - Pass Welds, Mraz, L.IX-1610-90, Sub-Commission IXA Recommendations For The Metallurgy Of Welding And TheWeldability Of Ferritic Steels Annual Report 1990, Defourny, J.IX-1611-90, Sous-Commission IX B Metallurgie Physique Du Soudage / Physical Metallurgy Of Welding. Annual Report Of SC IX B 1989 - 1990, Dadian, M.IX-1613-90, Annual Report - Sub-Commission IXJ Metallurgical Studies Of Fused Metal, Anon.IX-1616-90, Effect Of Welding Thermal Conditions On Structure And Properties Of ElectroslagRemelted CrMoV Steel Welded Joints, Khromchenko, F.A., Brodskaya, G.L. and Melamed, M.M.IX-1617-90, Influence Of A Welding Technology On Reduction Of Post-Welding Heat Treatment For Heat-Resistant CrMoV Steel Joints, Khromchenko, F.A., Farashyan, N.E. and Lappa, V.A.IX-1618-90, Recommendation For PWHT Of Welded Joints In Pressure Vessels And Other Heavy Duty Structures, Hrivnak, I.IX-1619-90, A Study On Impact Toughness And Corrosion Resistance Of Type 317LN Austenitic Stainless Steel Weld Metals, Miyake, T., Kanbe, Y., Koike, H., Enomoto, T., Nagasaki, H. and Ogawa, T.IX-1620-90, Correlation Between Hydrogen-Induced Cracking And Martensite Layer In Weld Bond Of 9% Ni Steel, Zhaowei, Z., Hongbin, C., Conghua, J., Jie, Y., Tingwu, C. and Xiangqi, Y.IX-1621-90, The Effects Of Test Conditions On Hydrogen Assisted Weld Cracking Of StE 335,StE 465 and StE 690 High Strength Steels, Hoffmeister, H. and Matthia, A.IX-1622-90, List Of Documents Of Commission IX-1990, Anon.IX-1623-90, Commission IX Annual Assembly Of Montreal 1990 Agenda, Hrivnak, I.IX-1627-89, Annual Report 1990. IIW Commission IX - Behaviour Of Metals Subjected To Welding, Hrivnak, I.IX-1629-90, Reliability Of HAZ Maximum Hardness Predicting Formulae, Bohorquez, C. and Buschinelli, A.J.A.IX-1630-91, Characterization Of The Cold Cracking Behaviour Of Steel During Welding, Uwer,D. and Hohne, H.IX-1631-91, Determination Of Suitable Minimum Preheating Temperatures For The Cold-Crack-Free Welding Of Steels, Uwer, D. and Hohne, H.IX-1633-91, Temper-Bead Weld Repair In Cr/Mo Steels, Bowker, J.T., McGrath, J.T., Orr,

Page 75

R.F., Letts, M.W. and Lau, T.W.IX-1634-91, Stress Corrosion Cracking Of Welded Joints In Zirconium-2.5% Niobium Alloy, Goncharov, A.B., Nerodenko, M.M., Polyakov, S.G. and Onoprienko, L.M.IX-1635-91, Effect Of Grain Boundary Structure On Weld Decay Of Austenitic Stainless Steel, Kokawa, H., Koyanagawa, T. and Kuwana, T.IX-1636-91, Oxygen Absorption By Steel Weld Metal In Ar-CO2-O2 Welding Atmosphere, Kuwana, T. and Sato, Y.IX-1637-91, Influence Of Delta-Ferrite On The Sensitization Of The Austenitic Stainless Steel Weld Metal, Nakao, Y., Nishimoto, K. and Ishizaki, M.IX-1638-91, Combined Influence Of Chromium, Molybdenum And Vanadium On Reheat Cracking Of Steels (Part II), Tamaki, K. and Suzuki, J.IX-1639-91, Weldability And Corrosion Resistance Of Duplex Stainless Steel Containing High Chromium And Molybdenum, Ogawa, K., Komizo, Y.-I., Azuma, S. and Kudo, T.IX-1640-91, Diffusion Bonding Process With Insert Of Amorphus Metal For Joining Of High Nickel Alloy Clad Steel Line Pipe, Komizo, Y.-I., Ogawa, K. and Azuma, S.IX-1641-91, Repair Of Creep Damaged Welded Joints Of Cr-Mo-V Steel Pipelines, Khromchenko, F.A., Lappa, V.A. and Kharchevnikov, V.A.IX-1642-91, Welded Joints. Heat Treatment Of Steam Pipelines Made Of CrMoC Steels. Technological Requirements (ISO/IIW Draft Standard), Khromchenko, P.A.IX-1643-91, Heat Flow Model For Pulsed Welding, Vishnu, P.R., Li, W.B. and Easterling, K.E.IX-1644-91, Transformation Kinetics Of Submerged Arc Weld Metal Preliminary Investigations,Thewlis, G.IX-1645-91, Effect Of The H.A.Z. Microstructure On The Fracture Toughness Of Offshore Microalloyed Structural Steel, Verrier, P., Maurickx, T., Taillard, R. and Garrigues, G.IX-1646-91, Effect Of The TiN Precipitates On The Mechanism Of Bainitic Transformation In Microalloyed Steel, Maurickx, T. and Taillard, R.IX-1647-91, Advantages Of TM-Steels In Welding Fabrication, Rauch, R. and Schutz, H.IX-1648-91, International Welding Conference 1990 In Vienna, Mayrhofer, M., Aigmuller, G. and Geyer, D.IX-1649-91, Guide To Weldability And Metallurgy Of Welding Of Steels Processed By Thermomechanical Rolling Or By Accelerated Cooling, Anon.IX-1650-91, Annual Report Of SCIXA -1991-, Anon.IX-1652-91, Annual Report Of SC IX-H 1990/91, Gooch, G.IX-1653-91, Annual Report - Sub-Commission IXJ Metallurgical Studies Of Fused Metal, Anon.IX-1656-91, Recommendation For PWHT Of Welded Joints In Steel Pressure Vessels And Other Heavy Duty Structures. Joint Working Group IIW Commissions IX And X, Anon.IX-1657-91, List Of Commission IX Documents - 1991, Anon.IX-1658-91, Annual Assembly 1991 In The Hague. Agenda, Anon.IX-1659-91, Annual Assembly 1991 The Hague-The Netherlands. Reheat Cracking. Review Of Recent Studies (1984-1990), Dhooge, A. and Vinckier, A.IX-1660-91, Metallurgical Aspects Of High Energy Density Welding, Koseck, M. and Bosansky, J.IX-1662-92, Effects Of Laser Surface Melting On Corrosion Resistance In Stainless Steel And Nickel-Base Alloy Clad Layers Of Cast Bi-Metallic Pipes, Nakao, Y. and Nishimoto, K.IX-1663-92, High Frequency Resistance Heating Upset Butt Weldability Of Low C-Nb-V-Low PCM Steel, Fukada, Y., Taka, T. and Okaguchi, S.

Page 76

IX-1664-92, Study On Critical CTOD Property Of Heat Affected Zone In C-Mn Microalloyed Steel, Fukada, Y. and Komizo, Y.-I.IX-1667-92, Effects Of ( Ferrite Morphology On Lower Temperature Fracture Toughness Of SUS304L Steel Weld Metal, Kamiya, O., Kumagai, K., Kikuchi, Y. and Matsuda, F.IX-1668-92, Development Of Al-Cu Cored Composite Filler Wire For GTAW Surfacing On Aluminum Alloy, Nakada, Y., Kanbe, Y., Kurihara, S., Koike, H. and Miyake, T.IX-1669-92, Overlaying By Plasma transferred Arc Welding Effect Of VC Addition, Sasaki, K., Kato, Y. and Shinoda, T.IX-1672-92, An Approach For Predicting Microstructures And Toughness Properties In Heat Affected Zones Of Multipass Welds Of Structural Steels, Devillers, L., Kaplan, D. and Testard, P.IX-1673-92, Contribution To Comparison Of Methods For Determining Welding Procedures For The Avoidance Of Hydrogen Cracking, Karppi, R.A.J. And Nevasmaa, P.IX-1674-92, A Summary Of Microstructures And Toughness Of Electron Beam Welds In HSLASteels, Ohara, M., Yurioka, N. and Inoue, T.IX-1675-92, Sous-Commission IX-B Metallurgie Physique Du Soudage / Physical Metallurgy Of Welding. Annual Report 1991-1992, Dadian, M.IX-1676-92, Annual Report SC IX-H 1991/92, Gooch, T.G.IX-1677-92, Annual Report - Sub-Commission IX-J, Anon.IX-1680-92, Annul Report Of SCIXA (Sub-Commission IX-A) -1992-, IX-1681-92, HAZ Hardness Tests For Evaluation Of Steel Weldability, Okumura, M. and Yurioka, N.IX-1682-92, M-A Formation In The Heat Affected Zone Of A Quenched And Tempered High Strength Low Alloy Steel, Ana Lucia, F. and Fernando, C.IX-1684-92, Laser Beam Welding Of High Strength Steels, Bourges, Ph.IX-1685-92, Non-Equilibrium Behavior Of Weld Metal In Flux-Related Processes, Olson, D.L., Edwards, G.R., Liu, S. and Matlock, D.K.IX-1686-92, An Update Of The State-Of-The-Art Of Weld Metal Hydrogen Cracking, Vuik, J. and Graville, B.IX-1687-92, Quantitative Assessment Of Low Alloy Steel Weld Metals Using The Light Microscope - Results Of An International Point Counting Exercise, Abson, D.J.IX-1689-92, Characterization Of PWHT Behavior Of 500 N/mm2 Class TMCP Steels, Anon.IX-1690-92, List Of Commission IX Documents In 1992, Anon.IX-1691-92, Commission IX Annual Assembly 1992 In Madrid. Agenda, Anon.IX-1695-92, Guidance On Specifications Of Ferrite In Stainless Steel Weld Metal, Lefebvre, J.IX-1697-92, Welding Duplex And Super-Duplex Stainless Steels, Van Nassau, L., Meelker, H. and Hilkes, J.IX-1699-93, Annual Report 1992 IIW Commission IX - Behaviour Of Metals Subjected To Welding, Hrivnak, I. and de Meester, B.IX-1700-93, Effect Of Grain Size On Solid State Bonding Of Superplastic Duplex Stainless Steel, Kokawa, H., Tsuzuki, T. and Kuwana, T.IX-1701-93, Vibration Damping Characteristics And Mechanical Properties Of Composite Sheets Consisting Of Rolled Spheroidal Graphite Cast Irons And Mild Steels, Mukae, S., Nishio, K., Katoh, M., Torigoe, T. and Yano, M.IX-1702-93, Influence Of Alloying Elements On SR-Cracking Sensitivity Of 720N/mm2 Class High Strength Steel, Tamaki, K., Imai, K., Suzuki, J., Kumagai, T. and Horii, Y.IX-1703-93, Nitrogen Absorption Of 316L Weld Metal By High Pressure GMA Process,

Page 77

Kikuchi, Y., Matsuda, F. and Okabe, T.IX-1704-93, Estimation Of Preheat Temperature For Pipeline Welding Based On Small Size Cracking Tests, Suzuki, H.IX-1705-93, Diffusion Bonding Of Intermetallic Compound TiAl, Nakao, Y., Shinozaki, K. and Hamada, M.IX-1706-93, Selection Of Steel Quality, Defourny, J.IX-1707-93, Application Of Very Low Yield Strength Consumables In The Root Pass Of Weldments To Prevent Preheating, Vuik, J., van Wortel, J.C. and van Sevenhoven, C.IX-1708-93, Quantitative Evaluation Of Solidification Brittleness Of Weld Metal By MISO Technique -Researches On Solidification Cracking Mechanism-, Matsuda, F. and Tomita, S.IX-1710-93, Electron Beam Weld Metal Toughness For Heavy Section Low Alloy Steel, Takano, G., Nayama, M., Sakamoto, N., Kuri, S., Billy, J. and Matsuda, F.IX-1712-93, Sub-Commission I X A Annual Report 1993, Defourny, J.IX-1713-93, Physical Metallurgy Of Welding Annual Report 1992-1993, Dadian, M.IX-1714-93, Annual Report SC IX-H 1992/93, Gooch, T.G.IX-1715-93, Annual Report - Sub-Commission IX-J. Metallurgical Studies Of Fused Metal, Anon.IX-1719-93, List Of Commission IX Documents In 1993, Anon.IX-1720-93, Commission IX Annual Assembly 1993 In Glasgow. Agenda., Anon.IX-1721-93, Longitudinal Bend Test To Assess Microfissure Susceptibility Of Deposited Weld Metal, Wilken, K.IX-1722-93, Review Of Experience With The Longitudinal Band Test For Microfissuring Susceptibility Of Deposited Weld Metal, Wilken, K.IX-1723-93, Effects Of Chemical Composition Of Duplex Stainless Steels On Microfissure AndPitting Corrosion After Solution Heat Treatment And Various Weld Simulation Cooling Cycles, Hoffmeister, H. and Lothongkum, G.IX-1724-93, Effect Of Microstructure On Cracking Of Low-Alloy C-Mn Welds, Dziubinski, J. and Adamiec, P.IX-1726-93, Annual Report 1993. IIW Commission IX - Behaviour Of Metals Subjected To Welding, Hrivnak, I. and de Meester, B.IX-1728-94, Establishment Of A Productive Welding Procedure For A YS 900 MPa Grade Steel, Youn, J.G. and Park, D.H.IX-1729-94, The Investigation Of Implant Cold Cracking Test, Changying, T., Xuelian, G., Qing, L., Florian, W. and Noack, V.IX-1730-94, TIG And MIG Welding Of Austenitic Stainless Steel In Dry Hyperbaric Nitrogen Atmosphere, Kikuchi, Y., Matsuda, F., Kamiya, O. and Janak, G.IX-1731-94, Characteristics For Solidification And Transformed Microstructure Of Electroslag Weld Metal In Low Carbon Structural Steel, Matsuda, F., Kikuchi, Y., Qian, Z.-D. and Fujihira, S.IX-1733-94, Friction Welding Of Ceramics To Metal With Intermediate Layer, Ikeuchi, K., Aritoshi, M., Chen, G.S., Billy, J. and Ushio, M.IX-1734-94, Stress Corrosion Cracking Susceptibilities Of Carbon Steels In High Temperature And High Pressure Water, Matsuda, F., Kikuchi, Y., Kuroda, T., Liu, S.-P., Sakaguchi, M., Kobayashi, M., Urayama, Y. and Kuniya, J.IX-1735-94, Weld HAZ Toughness And Microstructure Of Low Alloy Steel SQV-2A For Pressure Vessels, Matsuda, F., Ikeuchi, K. and Liao, J.IX-1736-94, Stress Corrosion Cracking Of Duplex Stainless Steel Weldment In High

Page 78

Temperature Water, Kuroda, T. and Matsuda, F.IX-1737-94, Embrittlement And Toughness Improvement Of Weld HAZ For HSLA Steels, Matsuda, F., Ikeuchi, K., Okada, H., Hrivnak, I., Magula, V. and Li, Z.IX-1738-94, Evaluation And Analytical Simulation Of Hydrogen Embrittlement In Duplex Stainless Steels, Murata, M., Wang, J.-B. and Mukai, Y.IX-1739-94, TMCP Steels And Their Welding, Yurioka, N.IX-1740-94, A Chart Method To Determine Necessary Preheat In Steel Welding, Yurioka, N. and Kasuya, T.IX-1741-94, The Solidification Grain Boundary Migration In The Weld Metal Of An Austenitic Stainless Steel, Shibata, S. and Watanabe, T.IX-1742-94, Effect Of Oxygen On Microstructure And Mechanical Properties Of Steel Weld Metal, Sato, Y., Hayakawa, N. and Kuwana, T.IX-1743-94, Effect Of Nitrogen On Microstructure And Impact Toughness Of Duplex Stainless Steel Weld Metal, Kokawa, H., Tomita, M. and Kuwana, T.IX-1744-94, Joining Dissimilar Stainless Steels For Pressure Vessel Components, Sun, Z. andHan, H.-Y.IX-1745-94, Types Of Temper Embrittlement In HAZ Of Cr-Mo Steel Classified By Tempering Time, Tamaki, K., Suzuki, J., Kawakami, H., Kojima, M. and Tanaka, K.IX-1747-94, The Phase Decomposition By Thermal Aging In Duplex Stainless Steels, Sakamoto, N., Matsumoto, O., Kawaguchi, S. and Toyoda, M.IX-1748-94, The Effect Of Shielding Gases In Laser Welding, Sakamoto, N., Matsumoto, O., Nagura, Y. and Ishide, T.IX-1753-94, Mechanical Property Changes In Welds After Their Long-Term High-TemperatureExposure, And Their Use For Ascertaining The Residual Life Expectancy Of Equipement, Koukal, J., Purmensky, J. and Schwarz, D.IX-1755-94, Study On Hot Cracking In Welded Joint Of Electroformed Nickel, Anli, L., Jialie, R., Baucai, L., Shulan, Y. and Jingyun, D.IX-1756-94, Numerical Simulation Of Hydrogen Diffusion And Its Microscopic Accumulation In HAZ, Zhang, C.IX-1757-94, A Study On Dissimilar Welding Of X20CrMoV12.1 With 10CrMo9.10, Tian, Z., Dhooge, A. and Coussement, C.IX-1759-94, The Effect Of Strain Rate On Solidification Crack Susceptibility Of Three Aluminum Alloys, Renpei, L., Shi, H. and Zujue, D.IX-1760-94, A Study Of The Prevention Of Weld Hot Cracking By Synchronous Rolling During Welding Along Both Sides Of The Weld, Liu, W., Tian, X. and Zhang, X.IX-1761-94, The Effects Of Solidification Behaviour Of Austenitic Stainless Steel On The Solidification Cracking Susceptibility Due To Welding, Zujue, D., Renpei, L., Yongming, P. andWilken, K.IX-1762-94, A Comparative Study On The Criteria Of Varestraint- And Transvarestraint-Test Of Solidification Cracking Sensitivity, Zujue, D., Yongming, P., Renpei, L. and Wilken, K.IX-1763-94, Embrittlement Of Stainless Steel Welds By Low Temperature Heat Treatment: A Summary Review, Gooch, T.G., Farrar, J.C.M. and Marshall,. A.W.IX-1764-94, The Effect Of Alloying Elements On The Microstructure And Properties Of Ferritic All-Weld Metal Deposits, Evans, G.M.IX-1765-94, The Effect Of Micro-Alloying Elements On The Microstructure And Properties Of Ferritic All-Weld Metals Deposits, Anon.IX-1766-94, Transformation Kinetics Of Ferrous Weld Metals, Thewlis, G.

Page 79

IX-1767-94, A Scatterband For Hydrogen Diffusion Coefficients In Micro Alloyed And Low Carbon Structural Steels, Bollinghaus, H., Hoffmeister, H. and Dangeleit, A.IX-1768-94, Mismatch In High Strength Steel Welds. Highlights Of European Workshop, Defourny, J. and D'Haeyer, R.IX-1769-94, Evaluation Of HAZ Toughness In Low-Carbon Low-Impurity AcC HT-50 And DQT HT-80 TMCP Steel Weldments Containing Local Brittle Zones, Nevasmaa, P.IX-1770-94, Annual Report Of SCIXA -1994-, Defourny, J.IX-1771-94, Sous-Commission IX B Metallurgie Physique Du Soudage / Physical Metallurgy Of Welding. Annual Report 1993-1994, Dadian, M.IX-1772-94, Annual Report - Sub-Commission IX-J, Anon.IX-1773-94, Annual Report SC IX-H 1993/94, Gooch, T.G.IX-1774-94, IIW Commission IX Working Group - Creep - Annual Report 1994, Vaessen, G.IX-1776-94, Commission IX Behaviour Of Metals Subjected To Welding. 1994 Annual Assembly In Beijing. Agenda., Hrivnak, I.IX-1777-94, List Of Documents (1993-1994), Anon.IX-1778-94, Stress Corrosion Cracking Susceptibility Of Bonding Zone Of Austenitic Stainless Steel Overlay, Hara, T., Yamaguchi, Y., Ishikawa, M., Yamane, T. and Minami, T.IX-1781-93, Annual Report 1993, Hrivnak, I. and de Meester, B.IX-1782-94, Review Of Mechanical And Metallurgical Investigations Of M-A Constituent In Welded Joints In Japan, Matsuda, F., Ikeuchi, K., Fukuda, Y., Horii, Y., Okada, H., Shiwaku, T., Shiga, C. and Suzuki, S.IX-1783-94, Improvement Of Intergranular Corrosion Resistance In The Sensitized Type 308 Stainless Steel Weld Metal By Laser Surface Melting Treatment, Nishimoto, K., Mori, H. and Nakao, Y.IX-1784-94, Diffusion Bonding Of Ti-6Al-4V Alloy Using Superplastic Titanium Alloy Intermediate Material, Kokawa, H., Nagashima, E., Kuwana, T., Aoshima, I. and Arato, K.IX-1785-94, Mechanical Properties Of Very Low Oxygen Steel Weld Metal, Sato, Y. and Kuwana, T.IX-1786-94, The Mechanism Of Hydrogen-Embrittlement-Type SCC In Duplex Stainless Steel Welded Joints, Murata, M., Wan, J.-B. and Mukai, Y.IX-1787-94, Reheat Cracking Sensitivity Of The Welded Joint Of Austenitic Stainless Steel, Ishii, J., Kaihara, S. and Kume, R.IX-1788-94, Low Ductility Creep Fracture In The HAZ Of Cr-Mo Steels, Tamaki, K., Kawakami,H., Suzuki, J. and Mizuno, M.IX-1789-94, Behavior Of Helium Bubble In Helium-Doped Stainless Steel Weldments, Matsuda, F., Kuroda, T. and Fujiya, Y.IX-1790-94, Effect Of M-A Constituent On Fracture Behavior Of 780 and 980 MPa Class HSLA Steels Subjected To Weld HAZ Thermal Cycles, Matsuda, F., Ikeuchi, K., Okada, H. and Hrivnak, I.IX-1791-94, Metallurgical Investigation On Long Term Temper Embrittlement Of 316 Cast Stainless Steel, Mraz, L., Matsuda, F., Kikuchi, Y., Sakamoto, N., Takano, G. and Kawaguchi, S.IX-1792-95, Microbiologically Influenced Corrosion (MIC) Of Stainless Steel Weldments On Pipe Line In The Sewage Treatment Plant, Kikuchi, Y., Matsuda, F., Tomoto, K. and Nishimura, M.IX-1793-94, The Effect Of Thermal Aging On The Mechanical Properties Of Cast Duplex Stainless Steels And Weld Metal, Tanaka, T., Sakamoto, N., Takano, G., Kawaguchi, S. and

Page 80

Shimizu, T.IX-1794-94, Thermal Embrittlement Of HAZ Of Duplex Stainless Steel Welds, Kume, R., Nakamura, H., Mei, J. and Mimura, H.IX-1795-94, Study Of HAZ Cracking Of Hot-Dip Galvanizing Steel Bridges, Abe, H., Iezawa, T., Kanaya, K., Yamashita, T., Aihara, S. and Kanazawa, S.IX-1796-95, State Of The Art Review On Effect Of PWHT On Properties Of Steel Weld Metal, Shiga, C., Gotoh, A., Kojima, T., Horii, Y., Fukuda, Y., Ikeuti, K. and Matuda, F.IX-1797-95, Transmission Electron Microscopic Study Of Interfacial Phases In Diffusion Bonding Of Commercial Aluminum Alloys, Kotani, K., Ikeuchi, K. and Matsuda, F.IX-1800-95, Influence Of W And Cu On Microstructure, Mechanical Properties And Corrosion Resistance In Super Duplex Weld Metal, Hertzman, S., Nilsson, M. and Jargelius-Pettersson, R.IX-1801-95, Influence Of W And Cu On Structural Stability In Super Duplex Weld Metal, Huhtala0, T., Nilsson, J.-O., Wilson, A. and Jonsson, P.IX-1802-95, Formation Of Secondary Austenite In Super Duplex Stainless Steel Weld Metal And Its Dependence On Chemical Composition, Nilsson, J.-O., Wilson, A. and Jonsson, P.IX-1803-95, Annual Report Of IIW Sub-Commission IX-A, Defourny, J.IX-1805-95, Annual Report - Sub-Commission IX-J, Anon.IX-1812-95, Scatterbands For Hydrogen Diffusion Coefficients In Low And High Alloyed SteelsWith An Austenite Decomposition Microstructure And High Alloyed Steels With An Austenitic Microstructure At Room-Temperature, Boellinghaus, Th., Hoffmeister, H. and Middel, C.IX-1813-95, Experiences With The Hot Cracking Behaviour Of High-Alloyed Austenitic Stainless Steels And Nickel Base Alloys Using The MVT-Test, As Well As Data Acquisition And Utilization In The Expert System HOTSRASNA, Wilken, K., Hunke, M. and Schmidt, R.IX-1814-95, The Influence Of The Microstructure On The Toughness Of C-Mn Multi-Run-WeldMetal, Cerjak, H., Letofsky, E., Pitoiset, X., Seiringer, A. and Evans, G.M.IX-1818-95, 1995 Annual Assembly In Stockholm, Agenda, De Meester, B. and Cerjak, H.IX-1819-95, List Of Documents 1994-1995 (April 15, 1995), Anon.IX-1823-95, The Effect Of Specimen Size On Creep Behaviour, Parker, J.D.IX-1825-95, Annual Report 1995, Cerjak, H. and de Meester, B.IX-1826-95, NDT For High Temperature Installations - A Review, Auerkari, P.IX-1827-96, Interface Structure And Fracture Energy Of Dissimilar Al2O3- Ti Joints, Heikinheimo, L.S.K. and de With, G.IX-1831-96, Proposal And Interim Result Of Round Robin Test On HAZ Microstructure, Kojima, T., Yurioka, N., Kasuya, T. and Shiga, C.IX-1832-96, Transient Liquid Phase Bonding Of Ni Base Single Crystal Superalloy, CMSX-2, Nishimoto, K., SAIDA, K., Kim, D. and Nakao, Y.IX-1833-96, Evaluation Of Toughness In Reheated Ti-B Weld Metals With Microstructure Analysis, Shiga, C., Tezuka, N., Yamaguchi, T. and Bosansky, J.IX-1834-96, Temper Embrittlement In HAZ Of Cr-Mo Steels Arising In Temperature Range Of Stress Relieving, Tamaki, K., Kawakami, H., Suzuki, J., Kojima, M. and Niinomi, T.IX-1835-96, Effect Of Solidification And Subsequent Transformation On Ferrite Morphologies In Austenitic Stainless Steel Welds, Inoue, H., Koseki, T. and Ohkita, S.IX-1836-96, Precipitation Behavior In Weld Metal Of Super Duplex Stainless Steel, Hirata, H., Fukuda, Y., Komizo, Y.-I., Kobayashi, T. and Sakaguchi, I.IX-1837-96, Effects Of Residual And Micro-Alloying Elements On Welding Of Stainless Steel. Part 1: Effects On Weld Pool Behavior By GTAW, Watanabe, K. and Masuda, K.

Page 81

IX-1838-96, Metallurgical Approach To Estimating Fracture Toughness Of BCC Iron Alloys At Low Temperatures, Okabaysi, H. and Hirano, K.IX-1839-96, Parameters Controlling Toughness Of Weld Metal Made By Three-Electrode, OnePass Submerged Arc Welding For Heavy Section Box Columns, Hayakawa, N., Sakaguchi, S.,Yasuda, K. and Kataoka, Y.IX-1840-96, Welding Of Highly Alloyed Austenitic And Duplex Stainless Steels, Karlsson, L., Rigdal, S. and Andersson, S.L.IX-1841-96, Welding Of High Molybdenum, Nickel-Base Alloys, Jordan, D.E.IX-1842-96, Low Temperature Fracture Toughness Of Thick Duplex And Superduplex Stainless Steel Weldments, Dhooge, A. and Deleu, E.IX-1843-96, Surface Hardening Of Aluminum Alloys By Alloying Processes, Matsuda, F.IX-1844-96, Data Sheet On The Elevated-Temperature Properties For Base Metals, Weld Metals And Welded Joints Of 18Cr-8Ni Stainless Steel Plates, Yamazaki, M., Monma, Y., Hongo, H., Watanabe, T., Abe, F. and Yagi, K.IX-1847-96, Annual Report Of SCIXA -1995-, Defourny, J.IX-1848-96, Physical Metallurgy Of Welding Annual Report 1995-1996, Dadian, M.IX-1849-96, Annual Report - Sub-Commission IX-J. Metallurgical Studies Of Fused Metal, Anon.IX-1850-96, Annual Report Of SC IX-H:1995/96, Gooch, T.G.IX-1851-96, IIW Commission IX Working Group - Creep - Annual Report 1996, IX-1852-96, Segregation Of Impurities On The Grain Boundaries In The Tests Of The Resistance Against The Reheat And Underclad Cracking, Magula, V., Grman, D. and Patscheider, J.IX-1855-96, Deux Solutions Innovantes Pour Le Soudage A L'Arc Et Electrodes Enrobees DesFontes GS, Stauder, F., Fargues, J. and Damagnez, P.IX-1857-97, Annual Report 1996. IIW Commission IX - Behaviour Of Metals Subjected To Welding, de Meester, B. and Cerjak, H.IX-1858-97, Metal Local Deformation And Failure At Different Martensite Content, Fedotova, M.A., Ammosov, A.P., Seyffarth, P. and Larionov, V.P.IX-1861-97, Selection Of Criteria For Technological Strength Evaluation Of Low Alloy High-Strength Steels, Larionov, V.P., Sleptsov, O.I. and Sivtsev, M.N.IX-1862-97, An Analysis Of Welding Technology Factors Influence On Kinetics Of Hydrogen Redistribution, Sleptsov, O.I., Mikhailov, V.E. and Struchkova, G.P.IX-1864-97, Effect Of Preheating And Type Of Welding Electrode On Quality Of Ductile Cast Iron Welding Joints, El-Batahgy, A.-L.IX-1866-97, Embrittlement In Weld-Strain-Affected Zone In Mild Steel, Toyooka, T.IX-1867-97, Influence Of Stress Relieving On Temper Embrittlement In HAZ Of Cr-Mo Steel, Tamaki, K. and Kawakami, H.IX-1868-97, Data Sheet On Mechanical Properties Of Saw Weld Metals, Yurioka, N., Wakabayashi, M. and Motomatsu, R.IX-1869-97, High Speed One-Side Submerged Arc Welding Of Low Temperature Service Steels, Oh-Hama, N., Katoh, T., Motomatsu, R., Tobishima, N., Shinada, K. and Fuji, M.IX-1871-97, The Effect Of Grain Growth In A Heat-Affected Zone On The Weld Metal Of Austenitic Stainless Steel, Shibata, S., Watanabe, T., Hirata, K. and Gotoh, H.IX-1872-97, Effect Of Elements On Weldability And Hot Ductility Of FCAW Stainless Steel Weld Metals, Toyoda, M., Matsumoto, O., Kawaguchi, S. and Tsukimoto, K.IX-1873-97, Effect Of Bismuth On Reheat Cracking Susceptibility In Type 308 FCAW Weld

Page 82

Metal, Nishimoto, K., Matsunaga, T., Tanaka, T. and Okazaki, T.IX-1874-97, Effects Of Interfacial Phases On Joint Strength Of Aluminum Alloys, Kotani, K., Ikeuchi, K. and Matsuda, F.IX-1875-97, Fundamentals Of Glass-To-Metal Bonding By Electrostatic Field, Morsy, M.A., Ishizaki, K., Ikeuchi, K. and Ushio, M.IX-1876-97, Survey On Reheat Cracking In Austenitic Stainless Steels And Ni Base Alloys, Dhooge, A.IX-1877-97, Intermetallic Phase Precipitation In Duplex Stainless Steels And Weld Metals, Karlsson, L.IX-1878-97, Pitting Corrosion Of Laser Welds In Austenitic Stainless Steels, Vilpas, M., Kujanpaa, V. and Karppi, R.IX-1879-97, Assessment Methods For Welds Under Creep Loading, Williams, J.A.IX-1880-97, Annual Report Of Sub-Commission IXA. Recommendation Relative To The Welding And Weldability Of Ferritic Steels For The Year 1996, Defourny, J.IX-1881-97, Sous-Commission IX B Metallurgie Physique Du Soudage / Physical Metallurgy Of Welding. Annual Report 1996-1997, Dadian, M.IX-1882-97, Annual Report Of Sub-Commission IX-J Annual Report 1996-1997, Anon.IX-1883-97, Annual Report Of SC IX-H: 1996/97, Gooch, T.G.IX-1884-97, IIW Commission IX Working Group - Creep- Annual Report 1997, Heerings, J.H.IX-1885-97, Significance Of Hardness For Welded Joints, Defourny, J., D'Haeyer, R. and Fourneaux, Ph.IX-1886-97, Quelques Developpements Recents Permettant Une Amelioration Supplementaire De La Qualite Des Structures D'Aciers Soudees, Anon.IX-1887-97, Weld Pool Grain Refinement Of Iron Aluminide Alloy FA-129. July 1997, Burt, R.P., Edwards, G.R. and David, S.A.IX-1888-97, 1997 Annual Assembly In San Francisco. Agenda., De Meester, B.IX-1890-97, The Effect Of Thermal Cycles On The Microstructures And Mechanical PropertiesOf High Strength Titanium-Bearing Shielded Metal Arc Weld Metal, Johnson, M.Q., Edwards, G.R. and Evans, G.M.IX-1891-97, Welding Of Nickel-Base Superalloy Single Crystals, David, S.A., Vitek, J.M., Boatner, L.A. and Reed, R.W.IX-1892-97, List Of Documents 1996 - 1997 (On May 20, 1997), Anon.IX-1894-97, IIW Commission IX. 50th Annual Assembly In San Francisco. List Of Resolutions/ Minutes Of Meeting, de Meester, B.IX-1895-98, Annual Report 1997 IIW Commission IX, de Meester, B. and Cerjak, H.IX-1896-98, Laser And Electron Beam Welding Of Al-Alloys: Literature Review, Cam, G., dos Santos, J.F. and Kocak, M.IX-1900-98, Application Of The IRC-Test For Assessment Of Reaction Stresses In Tubular Joints With Respect To Hydrogen Assisted Weld Cracking, Boellinghaus, Th., Hoffmeister, H. and Littich, M.IX-1901-98, Interpass Temperature And The Welding Of Strong Steels, Lord, M.IX-1903-98, The Result Of Cold Cracking In Multi-Pass Weld Metal, Yurioka, N.IX-1904-98, Temper Embrittlement In HAZ Of Cr-Mo Steels, Tamaki, K., Kawakami, H. and Suzuki, J.IX-190-57, Sub-Commission: Modifications To The Bonhomme Recommendations, Anon.IX-1905-98, Stress Corrosion Cracking Susceptibilities Of Carbon Steel And Its Welded Joint In High Temperature Water, Sakaguchi, M., Kikuchi, Y. and Matsuda, F.

Page 83

IX-1906-98, Interfacial Phases In Diffusion-Bonded Joints Of Al-X Alloys (X = Mg, Si, Mn, Zn, Cu) By Transmission Electron Microscopy (Effect Of Alloying Interfacial Oxide In Diffusion-Bonded Joint Of Al Alloys), Kotani, K., Jung, J.-P., Ikeuchi, K. and Matsuda, F.IX-1907-98, Formation Of Helium Bubble In YAG Laser Weldment Of Helium-Doped StainlessSteel, Kuroda, T. and Ikeuchi, K.IX-1908-98, Behavior Of Nitrogen In High Strength Stainless Steel JJ1 Weld Metal, Kokawa, H., Sato, Y.S., Kuwana, T. and Shindo, Y.IX-1909-98, Description Of A Method For Weldability Studies Of Nickel Alloys And Special High Grade Stainless Steels At The Example Of Materials With High Silicon Content, Herold, H., Neubert, G. and Zinke, M.IX-1910-98, Modelling Of One Sided Welding To Describe Hot Cracking At The End Of LongerButt Weld Seams, Herold, H., Streitenberger, M. and Pchennikow, A.IX-1911-98, Round Robin Test On HAZ Microstructure - Summary Of The Results Obtained AtThe Technical University Graz, Cerjak, H. and Letofsky, E.IX-1913-98, Annual Report Of Sub-Commission IX-J. Annual Report 1997-1998, Yurioka, N.IX-1914-98, Annual Report Of SX IX-H: 1997/98, Farrar, J.C.M.IX-191-57, Testing Of Welded Aluminium Alloys In Seawater, Anon.IX-1915-98, IIW Commission IX Working Group - Creep - Annual Report 1998, Heerings, J.H.IX-1920-98, Intermetallic Phase Precipitation In Duplex Stainless Steels And Weld Metals - Metallurgy, Influence On Properties, Welding And Testing Aspects, Karlsson, L.IX-1921-98, Predicted And Measured FN In Specifications, Kotecki, D.J.IX-1922-98, Technical Note On The Specification Of Metallographic Properties Of Weldments In Duplex And Superduplex Stainless Steel, van Nassau, L. and Meelker, H.IX-1923-98, Investigation To Compare Hot Cracking Tests -Externally Loaded Specimen- Intermediate Report May, 1998, Wilken, K.IX-1924-98, Application Of Friction Welding Of Dissimilar Metals For Repairing Of Power Station Components, Yamashita, Y., Yoshida, T. and Fujita, K.IX-1925-98, Commission IX Agenda At The 1998 Annual Assembly In Hamburg, Anon.IX-1926-98, List Of Documents 1997 - 1998 (On June 30, 1998), Anon.IX-1927-98, 51st Annual Assembly In Hamburg. List Of Resolutions., de Meester, B.IX-1928-99, Annual Report 1998 IIW Commission IX, de Meester, B. and Cerjak, H.IX-1929-99, Result Of Round Robin Test On HAZ Microstructure. July 1999, Kojima, T., Yurioka, N., Kasuya, T., Shiga, C., Ikeuchi, K. and Takahashi, M.IX-1930-99, A Baysian Neural Network Analysis On Tensile Strength, FATT And Hardness Of Large-Heat-Input SAW Welds, Yurioka, N., Fujii, H. and Ichikawa, K.IX-1931-99, Development Of Multi-Pass Submerged Arc Welding Process For Seam Welding Of UOE Pipe, Hamada, M., Matsuura, M., Ikeda, T. and Komizo, Y.-I.IX-1932-99, Toughness Of ICCGHAZ Of Low Alloy Steel SQV-2A Weld By Temper-Bead Technique, Ikeuchi, K., Liao, J. and Matsuda, F.IX-1933-99, Precipitation Behavior Of Sigma Phase In Duplex Stainless Steels And Weld Metals, Kuroda, T., Ikeuchi, K., Oe, K. and Nakade, K.IX-1934-99, Effect Of Sulfur And Thermal Cycles On Reheat Cracking Susceptibility In Multi-Pass Weld Metal Of Fe-36% Ni Alloy, Nishimoto, K., Mori, H., Esaki, K., Hongoh, S. and Shirai, M.IX-1935-99, Improvement In Bond Strength Of Diffusion-Bonded Al-Alloy Joint Through Mg Addition, Kotani, K., Jung, J.-P., Ikeuchi, K. and Matsuda, F.IX-1936-99, Improvement Of Weld Microstructure At Very Low Oxygen Levels, Ohara, M. and

Page 84

Wallach, E.R.IX-1937-99, A Holistic Model Of Hydrogen Cracking In Pipeline Girth Welding, Flecher, L. and Yurioka, N.IX-1938-99, Predictive Methods For Prevention And Control Of Hydrogen Assisted Cold Cracking, Yurioka, N.IX-1939-99, Comparison Of The Necessary Preheat Temperature To Avoid Cold Cracking In HAZ. State-Of-The-Art In Different Standards And An Idea To Overcome The Problems, Florian, W. and Berlin, E.A.IX-1940-99, Properties Of Power Beam Welded Steels, Al- and Ti-Alloys: Significance Of Strength Mismatch, dos Santos, J., Cam, G., Torster, F., Insfran, A., Riekehr, S., Ventzke, V. and Kocak, M.IX-1942-99, Electron Beam Welding Of Chromium-Molybdenum Steels For Petrochemical Applications, Bourges, Ph.IX-1943-99, Properties Of Laser Welded Supermartensitic Stainless Steels, Dhooge, A. and Deleu, E.IX-1944-99, Experimental And Numerical Investigation Of Transport Phenomena In Conduction Mode Weld Pools, Pitscheneder, W., Hong, T., DebRoy, T., Ebner, R., Mundra, K.and Benes, R.IX-1945-99, Investigation To Compare Hot Cracking Tests - Externally Loaded Specimen. Final Report, May, 1999, Wilken, K.IX-1946-99, Effect Of Intermetallic Content On Pitting Resistance Of Ferritic-Austenitic Stainless Steels, Ginn, B.J. and Gooch, T.G.IX-1947-99, Microstructural Development On Welding Low Carbon 13%Cr Martensitic Steels, Gooch, T.G., Woollin, P. and Haynes, A.G.IX-1948-99, Interesting Aspects When Welding High Nitrogen Stainless Steels, Marco, H.IX-1949-99, Effect Of Nitrogen On Laser Weldability Of Aluminium Alloys, Katayama, S., Seto,N., Kim, J.-D. and Matsunawa, A.IX-1950-99, Annual Report Of Sub-Commission IXA For The Year 1998, Anon.IX-1951-98, Annual Report Of Sub-Commission IX-J. Annual Report 1998-1999, Yurioka, N.IX-1952-99, Annual Report Of SC IX-HL 1998/99, Farrar, J.C.M.IX-1953-99, IIW Commission IX Working Group - Creep - Annual Report 1999, Heerings, J.H.IX-1954-99, Fracture Toughness Behaviour Of FSW Joints On Aluminum Alloys, von Strombeck, A., dos Santos, J.F., Torster, F., Laureano, P. and Kocak, M.IX-1955-99, Metallurgical And Mechanical Properties Of Radial Friction Welded Ti-6Al-4V-0.1Ru Risers, Torster, F., does Santos, J.F., Hutt, G. and Kocak, M.IX-1957-99, IIW 1999Annual Assembly In Lisbon Commission IX Agenda, de Meester, B.IX-1958-99, IIW Commission IX List Of Documents 1998-1999 (On May 30, 1999), Anon.IX-1961-99, IIW Commission IX Behaviour Of Metals Subjected To Welding, de Meester, B. and Cerjak, H.IX-1964-00, Prevention Of Hot Cracking In Multi-Pass Weld Metal Of Fe-36%Ni Invar Alloy, Nishimoto, K., Hongou, S., Kubo, N., Koga, S., Nagatani, H., Ogawa, K. and Hirata, H.IX-1965-00, Effect Of Cerium Addiction Of Hot Cracking Susceptibility In HAZ Of Cast Alloy 718, Nishimoto, K., Woo, I. and Shirai, M.IX-1966-00, Mechanical Properties Of High Strength 23%Cr Heat Resistant Austenitic Stainless Steel Weldment For Boiler, Hirata, H., Ogawa, K., Senba, H., Okada, H., Sawaragi, Y., Kan, T., Saitou, T. and Takatsu, T.IX-1967-00, Effect Of Chromium Content And Peritectic Reaction On Hot Cracking Of Weld

Page 85

Metal Of High Carbon Steel, Tamaki, K., Kawakami, H. and Suzuki, J.IX-1968-00, Microstructural Analysis Of Softening Region In Weld Heat Affected Zone Of UltraFine Grained Steels, Ito, R., Shiga, C., Kawaguchi, Y., Hayashi, T., Shinohara, H. and Torizuka, S.IX-1969-00, Hot Cracking Theory By Prokhorov And Modelling Of The PVR-Test, Herold, H., Streitenberger, M. and Pchennikow, A.IX-1970-00, Physical Nature Of Hydrogen-Induced Cold Cracks In Welded Joints In Structural Steels, Pokhodnya, I.K. and Shvachko, V.I.IX-1971-00, Effect Of Weld Metal Strength And Welding Conditions On Reaction Forces And Stress Distribution Of Restrained Components, Kannengie(er, Rh., Bollinghaus, Th., Florian, W. and Herold, H.IX-1972-00, Stress Corrosion Cracking Susceptibilities Of Carbon Steel In High Temperature Water, Sakaguchi, M., Kikuchi, Y. and Matsuda, F.IX-1973-00, Prediction Of Microsegregation And Pitting Corrosion Resistance Of Austenitic Stainless Steel Welds By Modelling, Vilpas, M.IX-1974-00, Position Statement On The Effect Of Bismuth On The Elevated Temperature Properties Of Flux Cored Stainless Steel Weldments, Farrar, J.C.M., Marshall, A.W. and Zhang, Z.IX-1975-00, Welding Of Ferritic And Martensitic 11-14%Cr Steels (Draft 5), Marshall, A.W. andFarrar, J.C.M.IX-1976-00, The Influence Of A Duplex Filler Material On The Weldability Of A New High Nitrogen Stainless Steel, Harzenmoser, M.IX-1977-00, Fracture Toughness Properties Of Two Grades Of X80 Supermartensitic Welded Pipes, Deleu, E. and Dhooge, A.IX-1980-00, Annual Report Of SC IX-H: 1999/2000, Farrar, J.C.M.IX-1983-00, Effect Of Residual And Micro-Alloying Elements On Welding Of Stainless Steel. Part 2: Effects On Mechanical Properties By Arc Welding, Miyake, T., Nagasaki, H., Mizumoto,M., Watanabe, D. and Yurioka, N.IX-1987-00, IIW 2000 Annual Assembly In Florence Commission IX Agenda, de Meester, B.IX-1988-00, IIW Commission IX List Of Documents 1999-2000 (On May 11, 2000), Anon.IX-1990-00, IIW Commission IX. Behaviour Of Materials Subjected To Welding, de Meester, B.IX-1991-00, Annual Report 2000 IIW Commission IX, de Meester, B. and Cerjak, H.IX-1992-01, Prediction Of Strength Of Weld Metal (Report I), Yurioka, N.IX-1993-01, Oxide Films At Diffusion-Bonded Interfaces Of Al-Li And Al-Ca Alloys, Takeuchi (Kotani), T., Ikeuchi, K., Jung, J.P. and Matsuda, F.IX-1994-01, Laser Spraying Process For TiNi, NiA; And TiAl Intermetallic Compound Coatings On Al And Stainless Steel Plates, Araki, T., Tomochika, H., Hirabara, T. and Nishida, M.IX-1995-01, Effect Of Solidification Mode On Hot Cracking Susceptibility In Laser Welds Of High Nitrogen Stainless Steels, Nishimoto, K., Mori, H. and Ueda, K.IX-1996-01, Metallurgical Causes Of Low Ductility Creep Fracture In HAZ Of 2 1/4Cr-1Mo Steel, Tamaki, K., Kawakami, H. and Suzuki, J.IX-1997-01, Implications On Controlling Factors Affecting Weld Metal Hydrogen Cold CrackingIn High-Strength Shielded-Metal Arc (SMAW) Multipass Welds. Technical Progress Report, Nevasmaa, P. and Karppi, R.IX-1998-01, Corrosion Resistance Of Plasma Weld Surfacing On Duplex Steels, Schultze, S., Gollner, J., Bouaifi, B. and Herold, H.

Page 86

IX-1999-01, Preheating In The Welding Of Ferritic Steels, Christoph, H., Steinbichler, D. and Wegmann, H.IX-2000-01, Prevention Of Centreline Solidification Cracking During One-Side Welding, Herold, H., Streitenberger, M. and Pchennikov, A.IX-2001-01, Stress-Relief Cracking Of A Ferritic Alloy Steel, Nawrocki, J.G.IX-2002-01, Reliability Improvements In Repair Welding Of High-Strength Steels, Samardzic, I.and Siewert, T.IX-2003-01, Microstructural Development And Weldability Of Fusion Welds In Alloy Al-6XN Prepared With IN622 And IN625 Filler Metals, DuPont, J.N. and Banovic, S.W.IX-2004-01, Progress On Welding Of High Nitrogen Alloyed Austenitic Stainless Steels, Holmberg, B.IX-2005-01, Girth Welding Of Supermartensitic Stainless Steels With Matching Filler Metals, Heuser, H., Jochum, C., Perteneder, E. and Tosch, J.IX-2006-01, Cold Cracking In High Strength Weld Metal Possibilities To Calculate The Necessary Preheating Temperature, Florian, W.IX-2007-01, Annual Report Of Sub-Commission IXA For The Year 2000, Anon.IX-2008-01, Annual Report Of Sub-Commission IX-J. Annual Report 2000-2001, Yurioka, N.IX-2009-01, Annual Report Of SC IX-H:2000/2001, Farrar, J.C.M.IX-2010-01, Annual Report 2000 Of The IIW Commission IX Working Group - Creep -, Anon.IX-2015-01, IIW 2001 Annual Assembly In Ljubljana Commission IX Agenda, de Meester, B. and Cerjak, H.IX-2016-01, IIW Commission IX List Of Documents 2000-2001 On May 7th, 2001, Anon.IX-2017-01, Annual Report Of IIW Commission IX, 54th Annual Assembly In Ljubljana. List OfResolutions, de Meester, B.IX-2018-01, Annual Report 2001 Of IIW Commission IX, de Meester, B.IX-2022-02, Multi-Pass GTAW Process for Thick Joint of Fe-36%Ni Alloy, Hongoh, S.; Yamamoto, S.; Ogawa, K.; Ikebe, M.; Nagatani, H.; Koga, S.IX-2022-02, Multi-Pass GTAW Process for Thick Joint of Fe-36%Ni Alloy, Hongoh, S.; Yamamoto, S.; Ogawa, K.; Ikebe, M.; Nagatani, H.; Koga, S.IX-2024-02, Ductility Decrease Of Cold Worked And Hydrogen Charged Type 304, 316 and 316L Austenitic Stainless Steels, Luo, X., Matsuda, F., Ashida, E., Kitamura, I. and Shono, S.IX-2056-03, Sigma Phase Precipitation and Its Influence on Hydrogen Induced Cracking of Duplex Stainless Steel Base Metal and Weld Metal, Nakade, K.IX-2057-03, Comparison of Preheat Predictive Methods (Report 2), IX-2058-03, Prediction of Strength of Weld Metals (Report 3), IX-2059-03, Effect of Chromium and Nickel Contents on Liquid Zinc Embrittlement in Heat Affected Zone of Austenitic Steels, IX-2061-03, Segregation of Phosphorous Induced by a Thermal Cycle of Welding and Its Effect on Reheat Cracking, IX-2062-03, A Study on Thermal Cycle Condition of Temper Bead Welding for SQV2A Pressure Vessel Steel, IX-2063-03, Hydrogen Diffusion Coefficient and Modelling of Hydrogen Behaviour in Welded Joints of Structural Steels, Alexandrov, B.T.IX-2071-03, Annual Report of Sub-Commission IX-J, IX-230-58, Recommendation For The Choice And Classification Of Steels For Use In Welded Structures, Anon.IX-233-58, Correlations Of Brittle-Fracture Service Failures With Laboratory Notch-Ductility

Page 87

Tests, Puzak, P.P., Babecki, A.J. and Pellini, W.S.IX-234-58, Brittle Fracture In Welded Ships, Hodgson, J. and Boyd, G.M.IX-235-58, Arrest And Re-Propagation In Brittle Fracture, Anon.IX-240-59, Reunion Du Groupe De Travail -Rupture Fragile (Abington, 7 Avril 1959), Plateau, M.J.IX-244-59, Classification Of Structural Parts. A Survey Of The Problems, Ruhl, G.IX-260-60, The Metallurgical Concomitants Of Residual Stress, Boyd, G.M.IX-262-60, Continuous Cooling Transformation Diagrams Of Steels For Welding And Their Application, Sekiguchi, H. and Inagaki, M.IX-263-60, Particularities De La Transformation De L' Austenite Et De A Formation De Fissures Froides Lors De Soudage Par Fusion, Rykalin, N.N. and Sorsorov, M.H.IX-265-60, Brittle Fracture Mechanics In Relation To Transition Temperature Behaviour, Kochendorfer, A., Lagasse, B.E., Munse, W.H., Plateau, J., Sleeswyk, A.W. and Wells, A.A.IX-288-61, Weldability Of High Strength Steels Evaluated By Synthetic Heat-Affected Zone Ductility Test, Suzuki, H. and Tamura, H.IX-290-61, Information On Cracking Tests - Introductory Note -, Granjon, H.IX-291-61, Report On The Use Of The Controlled Thermal Severity (CTS) Test In Different Laboratories., Lagasse, P.E., Winterton, K., Autio, A., Granjon, H., Rosenzweig, J., Wiester, Descovich, S., Sekiguchi, H., Inagaki, M., Tremlett, H.F., Rykalin, N.N. and Sorsorov, M.K.IX-322-62, Effect Of High Temperature Prestraining On Fracture Stress Curves Of Steel, Terazawa, K., Otani, M., Yoshida, T. and Terai, K.IX-389-64, Cooperative Study Of Brittle Fractures In Service. Shell Plate Below The Sheerstrake During The Repairs On An Oil Tanker, Anon.IX-390-64, Cooperative Study Of Brittle Fractures In Service. Hatch Coaming Of An Ore Carrier, Anon.IX-391-64, Cooperative Study Of Brittle Fractures In Service. Sheerstrake Of A Cargo Ship, Anon.IX-392-64, Cooperative Study Of Brittle Fractures In Service. Main Deck Of A Cargo Ship, Anon.IX-393-64, Cooperative Study Of Brittle Fractures In Service. Deck Of The Quick Freeze Chamber Of A Refrigerator Ship, Anon.IX-394-64, Cooperative Study Of Brittle Fractures In Service. Upper Deck In An Oil Taker, Anon.IX-395-64, Cooperative Study Of Brittle Fractures In Service. Stringer Plate Of An Oil Tanker, Anon.IX-396-64, Cooperative Study Of Brittle Fractures In Service. Bilge Strake Of An Oil Tanker, Anon.IX-397-64, Cooperative Study Of Brittle Fractures In Service. Bottom Strake Of An Oil tanker, Anon.IX-398-64, Cooperative Study Of Brittle Fractures In Service. Shelterdeck Of A Cargo Ship, Anon.IX-399-64, Cooperative Study Of Brittle Fractures In Service. Stringer And Sheerstrake PlatesOf A Shelterdeck, AnonIX-400-64, Cooperative Study Of Brittle Fractures In Service. Hatch Corner Deck And Side Shell Of A Shelterdeck, Anon.IX-401-64, Cooperative Study Of Brittle Fractures In Service. Twindeck And Shelterdeck Of A Cargo Ship, Anon.

Page 88

IX-402-64, Cooperative Study Of Brittle Fractures In Service. Welding Of A Ship Plate, Anon.IX-403-64, Cooperative Study Of Brittle Fractures In Service. Plate After Straight/Tening And Welding, Anon.IX-404-64, Cooperative Study Of Brittle Fractures In Service. Fracture During Ship Repairs, Anon.IX-405-64, Cooperative Study Of Brittle Fractures In Service. Tanker Bottom Plate During Repairs, Anon.IX-406-64, Cooperative Study Of Brittle Fractures In Service. Ship Derrick, Anon.IX-407-64, Cooperative Study Of Brittle Fractures In Service. Interim Report, Anon.IX-408-64, Effects Of Restraint And Hydrogen On Root Cracking Of High Strength Steel Welds (NRIM TRC Test), Suzuki, H., Inagaki, M. and Nakamura, H.IX-409-64, Effect Of Restraint On Root Cracking Of Steel Welds, Watanabe, M., Satoh, K. andMatsui, S.IX-410-64, On The Embrittlement Of Large Steel Casting Due To Welding, Watanabe, M. and Andoh, A.IX-411-64, Fracture Stress Curve And Notch Toughness Of Structural Steels, Terazawa, K., Otani, M., Terai, K. and Kanatani, F.IX-412-64, On The Notch Toughness Of Structural Steel Plates With Special Reference To Propagation-Arrest, Koshiga, F.IX-413-64, Some Basic Considerations On Crack Arresters For Steel Structures - The 1st Report -, Kanazawa, T., Machida, S. and Matoba, M.IX-414-64, Evaluation Griterion Of Structural Steels For Low Temperature Application, Kihara, H. and Kanazawa, T.IX-415-64, The Idea Of The HW Steels In Japan -Tentative Specification For High Strength Steel Plates For High Pressure Vessels And The Other Welded Structures, Kihara, H. and Inagaki, M.IX-417-64, Some Developments Of High Strength Steel And Electrode For H2S Sulphide Corrosion Cracking, Watanabe, M. and Mukai, Y.IX-418-64, The Embrittlement Temperature At An Inhomogeneous Stress State, Kochendorfer, A.IX-420-64, Cooperative Study Of Brittle Fractures In Service. Cement Kiln Shell, Anon.IX-421-64, Cooperative Study Of Brittle Fractures In Service. Oil Storage Tank ( 12 500 m3 ), Anon.IX-422-64, Cooperative Study Of Brittle Fractures In Service. Rotary Kiln, Anon.IX-423-64, Cooperative Study Of Brittle Fractures In Service. Cylindrical Pressure Vessel, Anon.IX-425-64, Le Comportement De La Tole Fissuree, Soete, W.IX-427-64, More Experiments On The Metallurgical Concomitants Of Residual Stress, Anon.IX-428-64, Experimental Fracture Toughness Measurement On Mild Steel, Dvorak, J. and Vrtel, J.IX-433-65, Application OF ECA (Engineering Critical Assessment) In The Evaluation Of DefectIn Girth Welds, Anon.IX-438-65, A New Apparatus For Determining SH-CCT Diagram For Welding And Its Application To High Strength Steels, Inagaki, M., Uda, M. and Wada, T.IX-439-65, Effect Of Microstructure On Root Cracking In High Strength Steel Welds And Behaviour Of Hydrogen, Inagaki, M., Nakamura, H. and Suzuki, H.IX-440-65, On The Change Of Properties Of High Tensile Strength Steels Due To Weld

Page 89

Thermal Cycles, Kaneko, N., Ideguchi, Y., Tanaka, J. and Obata, T.IX-442-65, On The Evaluation Of Ductility Of Weld Metals For Low Temperature Application, Kihara, H., Kanazawa, T. and Itagaki, H.IX-443-65, Properties Of The Atmospheric Corrosion Resistant High Strength Cu-P-Ti Steel, Muta, T. and Nishi, T.IX-444-65, One Proposal To Improve The Weldability Of High Tensile Strength Steel - Precipitation Hardened High Tensile Strength Steel -, Hotta, T., Muraki, J., Kanazawa, S., Ishiguro, T. and Nakashima, A.IX-446-65, Properties Of Niobium Treated High Tensile Steel Plate For Welding Structure, Hasebe, S.IX-447-65, Results Of Burst Test Of Niobium Treated High Tensile Steel Pipe At Lower Temperature, Hasebe, S.IX-448-65, Notch Toughness On Deposited Weld Metals, Terazawa, K., Otani, M., Terai, K. and Kanatani, F.IX-451-65, Cooperative Study Of Brittle Fracture In Service. Main Girder Of A Welded Bridge, Anon.IX-452-65, Cooperative Study Of Brittle Fractures In Service. Flame Cut Rolled Beam, Anon.IX-453-65, Cooperative Study Of Brittle Fractures In Service. Welded Girder Flange, Anon.IX-454-65, Cooperative Study Of Brittle Fractures In Service. Links Of A Bucket Dredger Chain, Anon.IX-455-65, Cooperative Study Of Brittle Fractures In Service. Bridge Girder, Anon.IX-456-65, Cooperative Study Of Brittle Fractures In Service. Welded Panel During Cold Pressing, Anon.IX-457-65, Cooperative Study Of Brittle Fractures In Service. Lifted Lug In A Shipyard, Anon.IX-458-65, Cooperative Study Of Brittle Fractures In Service. Excavator Boom Suspension Rope Anchorage Plate, Anon.IX-459-65, Cooperative Study Of Brittle Fractures In Service. Jack Dumper, Anon.IX-460-65, Cooperative Study Of Brittle Fractures In Service. Building Crane, Anon.IX-462-65, Brittleness Of Electron-Beam Welded Molybdenum Joints, Tsi-Luan, P.IX-463-65, Restoration Of Ductility By Heat Treatment At 700 To 1150(F Of ABS-B Steel Embrittled By Hot Or Cold Straining, Mylonas, C. and Beaulieu, R.J.IX-464-65, Physical Singularities Of Crack Development, Fridman, J.B. and Morozov, E.M.IX-466-65, Appreciation A L'Essai De Soudabilite Sous Tension Biaxiales Du Comportement De Toles En Alliages Utilises Dans L'Aeronautique, Blanchet, B.IX-467-65, Soudabilite Des Aciers En Relation Avec Leurs Caracteristiques De Transformation, Anon.IX-468-65, The Influence Of Carbon, Nitrogen And Titanium On The Weldability Of 17% Cr Stainless Steel, Wegrzyn, J.IX-471-65, Loss Of Ductility In Material Next To A Weld, De Koning, A.C.IX-481-65, Methods Of Determining And Regulating The Capacity Of Steels For Resisting Cold Cracking During Welding, Prokhorov, N.N. and Makarov, E.L.IX-482-65, A Specimen Giving Quantitative Results For Use In Determining The Capacity Of Metals For Resisting Hot Cracking During Crystallisation, Prokhorov, N.N. and Arutyunova, I.A.IX-483-65, Influence Of Process Variables On The Resistance Of Hardenable Steels To Delayed Heat Affected Zone Cracking, Shorshorov, M.Kh. and Belov, V.V.IX-484-65, Methods Of Assessing The Capacity Of Weld Metals And Heat Affected Zone For Resisting Hot Cracking, Shorshorov, M.Kh.

Page 90

IX-490-66, Comportement Des Metaux Du Point De Vue Du Soudage, Granjon, H. and Gaillard, R.IX-491-66, Study On Submerged Arc Welding For HT-80 Steel, Onoe, H.IX-492-66, Study On Hot-Cracking Of Austenitic Stainless Steel In Overlay Welding, Ujiie, A., Sato, S., Nagaoka, T., Shono, S. and Yoshimasu, T.IX-493-66, Cooperative Study Of Brittle Fractures In Service. Welded Bridge In H.T. Steel, Anon.IX-494-66, Cooperative Study Of Brittle Fractures In Service. Profile Of Gantry Crane, Anon.IX-495-66, Cooperative Study Of Brittle Fractures In Service. Beam Of A Bending Machine, AnonIX-496-66, Cooperative Study Of Brittle Fractures In Service. Drum Of A Boiler Whilst Under Hydraulic Test, Anon.IX-500-66, Cooperative Study Of Brittle Fractures In Service. Oil Storage Tank, Anon.IX-501-66, Cooperative Study Of Brittle Fractures In Service. Failure Of A Boiler During Hydrostatic Test, Anon.IX-501-70, Weldable QT High Strength Steels And Their Applications In Japan, Anon.IX-503-66, Cooperative Study Of Brittle Fractures In Service. Gas Holder, Anon.IX-509-66, Soudage A Basse Temperature Des Constructions Tubulaires D'Acier Pour Les Lignes Magistrales, Alexandru, S. and Ionescu, Gh.IX-510-66, On The Sulphide Corrosion Cracking Of High Strength Steel Owing H2S In Chemical Plants, Watanabe, N. and Mukai, Y.IX-512-66, Hard Distribution In The Heat Affected Zone Of Heat Treated High Strength Steels,Anik, S.IX-513-66, Influence De La Pollution De L'Air Sur La Vitesse De La Corrosion Atmospherique Des Assemblages Soudes De Quelques Aciers Utilises Dans La Construction Des Wagons De Chemin De Fer, Kaluza, F. and Michalik, J.IX-515-66, The Sub-Structure Of The Weld Metal Occurring In The Course Of Crystallization, Prokhorov, N.N. and Prokhorov, N.Nikol.IX-516-66, A Method Of Designing The Macrostructure Of Weld Metal, Prokhorov, N.N. and Prokhorov, N.Nikol.IX-517-66, Influence Of Plastic Deformation And Age Hardening On The Brittle Failure, Vinokurov, V.A., Djemtshujnikov, G.V., Girenko, V.C. and Scurikhin, M.N.IX-519-66, Comparative Estimation Of The Cold Crack Resistance Of Steels By The Rigid Weld Specimen And IMET-4 Techniques, Belov, V.V. and Shorshorov, M.IX-527-67, Susceptibility To Cracking Of Welded Aluminium Joints. Part 1 - Theories, van der Torre, D. and Romijn, N.M.J.IX-528-67, On The Ductility And Ageing Properties Of 9% Nickel Steel, Aoki, K.IX-530-67, The Use Of Overstressing Technique To Reduce The Risk Of Subsequent Brittle Fracture, Nichols, R.W.IX-531-67, The Welding Of Stainless Chromium Steel, Wegrzyn, J.IX-536-67, Cooperative Study Of Brittle Fracture In Service. Boiler Drum (Whilst Under Hydraulic Test), Anon.IX-537-67, Cooperative Study Of Brittle Fracture In Service. Trailer Coupling, Anon.IX-538-67, Cooperative Study Of Brittle Fracture In Service. Main Girder Of A Bridge, Anon.IX-540-67, Cooperative Study Of Brittle Fracture In Service. Thick Walled Pressure Vessel, Anon.IX-541-67, Cooperative Study Of Brittle Fracture In Service. Steel Work Of A Furnace, Anon.

Page 91

IX-542-67, Cooperative Study Of Brittle Fracture In Service. Pressure Vessel, Anon.IX-543-67, Cooperative Study Of Brittle Fracture In Service. Strake Of An Oil Storage Tank, Anon.IX-544-67, Cooperative Study Of Brittle Fracture In Service. Oil Storage Tank, Anon.IX-545-67, Cooperative Study Of Brittle Fracture In Service. Steel Structure, Anon.IX-546-67, Cooperative Study Of Brittle Fracture In Service. Gas Pipeline Failure, Anon.IX-547-67, Cooperative Study Of Brittle Fracture In Service. Gas Transmission Pipe Line, Anon.IX-551-67, The Ageing Of Steel. Methods On Evaluating Strain-Ageing Susceptibility, Vrtel, J.IX-552-67, The Selection Of An Energy Criterion In The Charpy Test, Boyd, G.M.IX-553-67, Contribution Of K.N.H.S. To Sub-Commission IX-F On The Subject Of RelationshipBetween Charpy-V Energy And Fibrosity, Anon.IX-554-67, The Influence Of Welding On Changes In The Heat Affected Zone Below A1, Hrivnak, I.IX-555-67, Note On The Carbon Equivalent, Anon.IX-556-67, The Application Of Higher Tensile Steel In Merchant Ship Construction, Buchanan, G.IX-557-67, Proposition D'Une Nouvelle Methode D'Essai De La Soudabilite Des Aciers, Cabelka, I. and Million, C.IX-558-67, The Problem Of Corrosion Attack Of Stainless Steels In The Immediate Vicinity Of The Weld Metal, Cihal, Vl. and Jezek, J.IX-568-68, The Problem Of Cracking During Stress Relieving Heat Treatment, Nichols, R.W.IX-569-68, The Possible Influence Of The Heat-Affected Zone On Fracture Initiation And How This Is Affected By Composition And Microstructure, Watkins, B.IX-571-68, Proposal For The Testing Of Weld Metal From The Viewpoint Of Brittle Fracture Initiation: Tentative Fixation On The Testing Parameters, van den Blink, W.P. and Nibbering, J.J.W.IX-572-68, Considerations With Regard To Brittle Fracture Testing Of Weld Metal, With Special Reference To Doc. No IX-571-68, Anon.IX-573-68, Brittle Fracture Propagation In Welded Joints, Selander, L. and Todell, L.IX-574-68, Reaction Stress And Weld Cracking Under Hindered Contraction, Satoh, K. and Matsui, S.IX-575-68, High-Strength Steels For Welded Structures In Japan, Inagaki, M.IX-576-68, Weldability Formula Of High Strength Steels, Ito, Y. and Bessyo, K.IX-578-68, Simulated Heat-Affected Zone Notch Toughness Of 13% Cr Cast Alloy Steels, Asakura, S., Watanabe, K. and Nemoto, T.IX-579-67, Information Referring To The Study Of Minority Phases In Steels, Performed In The Laboratories Of The Welding Research Institute In Bratislava, Hrivnak, I.IX-580-68, The General Theory Of Heat Treatment In The Range A1 - A3, Hrivnak, I.IX-581-68, Structure And Properties Of Electroslag Weld Metals, Hrivnak, I.IX-582-68, The Study Of The System Fe-V-C-N With A View To The Welding Process, Hrivnak, I.IX-583-68, Contribution To The Theory Of High-Strength Weldability, Mazanec, K. and Hyspecka, L.IX-584-68, Resultats Obtenus Et Nouvelles Possibilities Offertes Par La Methode Des Implants Pour L'Etude De La Soudabilite Des Aciers, Granjon, H., Debiez, S. and Gaillard, R.IX-585-68, Performance Of Cracking Tests On Fusion Welded Aluminium Alloys Part II,

Page 92

Romijn, N.M.J. and van der Torre, D.IX-586-68, The Mechanical Properties Of Welded Joints In Quenched And Tempered Steels, Curzytek, M. and Pregalinski, S.IX-588-68, Cooperative Study Of Brittle Fractures In Service. Steam Piping Made Of Helically Welded Tubes, Anon.IX-589-68, Cooperative Study Of Brittle Fractures In Service. High Pressure Boiler Drum, Anon.IX-590-68, Cooperative Study Of Brittle Fractures In Service. Partial Fracture Of Bilge And Bottom Plating Of An Oil Tanker, Anon.IX-591-68, Cooperative Study Of Brittle Fractures In Service. Supporting Arms Of A Rotary-Tower Crane Carriage, Anon.IX-592-68, Cooperative Study Of Brittle Fractures In Service. Longitudinal Cracking On A Course Of A Tank Shell, Anon.IX-593-68, Cooperative Study Of Brittle Fractures In Service. Transverse Cracking Of A Welded Joint, Anon.IX-594-68, Cooperative Study Of Brittle Fractures In Service. Thick Walled Pressure Vessel, Anon.IX-596-68, Commission IX Progress Report, van der Torre, D.IX-597-68, Stress Corrosion Investigation Of Welded AlZnMg-Specimens With Silver-Addition In The Filler Metal, Aronson, P.-O. and Lindstrand, E.IX-598-68, Sub-Commission IX-F - Progress Report 1968, Anon.IX-599-68, Institut International De La Soudure, Anon.IX-600-68, Note On Underbead Hardness And The Susceptibility To Cold Cracking, Anon.IX-601-68, Sub-Commission IX G Progress Report, Kullberg.IX-603-68, - Studies On Cracking -, Baker, G.IX-607-68, Project De La Delegation Tchecoslovaque Pour L'Organisation D'Un Groupe D'Etude Sur -Les Essais De Fissuration A Chaud, Anon.IX-608-68, Hydrogen Distribution And The Effect Of Microstructure On Heat-Affected Zone Cracking, Hopia, R.IX-609-68, Yield Stress Behaviour Of Carbon And Low-Alloy Structural Steels In Relation To Grain Size, Temperature, Prior Deformation, And Aging, Dahl, V.W., Hengstenberg, H. and Behrens, H.IX-610-68, Brittle Fracture Behaviour Of Plain Carbon And Low-Alloy Structural Steels Observed In Notch Impact-Bending And Tensile Tests As A Function Of Grain Size, Temperature, Preliminary Strain Hardening And Aging, Dahl, V.W., Hengstenberg, H. and Behrens, H.IX-611-68, Application Of Aluminium Ands Its Alloys In Welded Structure For Chemical Industry, Rabkin, D.M. and Dovbishchenko, I.V.IX-612-68, Welding Of Dissimilar Metals, Rabkin, D.M. and Ryabov, V.R.IX-617-68, Proposal For The Testing Of Weld Metal From The Viewpoint Of Brittle Fracture Initiation, van den Blink, W.P. and Nibbering, J.J.W.IX-618-69, The Dependence Of Weldability On Various Factors, Schonherr, W.IX-620-69, Behaviour Of Metals Subjected To Welding, Anon.IX-622-69, The Mechanical Properties Of Heavy Plates Perpendicular To The Rolling Surface In Comparison With The Values In The Longitudinal And Transverse Directions, Dahl, W., Hengstenberg, H. and Duren, C.IX-623-69, Relevance Between Delayed Failure Of High-Strength Steel By Electrolytic

Page 93

Hydrogen And Weld Cold Cracking Sensitivity, Hotta, T., Yamato, K. and Takeshi, Y.IX-624-69, On The Weld-Cracking And Micro-Fissuring Of Weldable Al-Zn-Mg Alloys, Fukui, T., Sugiyama, Y. and Terai, S.IX-625-69, Cold Cracking In Multilayer Welds Of Low-Alloy High-Strength Steel, Inagaki, M., Nakamura, H. and Mitani, Y.IX-626-69, Studies On Weldability And Workability Of 60 To 80kg/mm2 High-Strength Steels And Their Applications To Hydraulic Turbine Parts, Sejima, T., Okuni, T., Ishihara, M. and Wada, T.IX-627-69, Studies On Restraint Intensity Of Weld Cracking Test Specimens, Fujita, Y., Takeshi, Y. and Nomoto, T.IX-628-69, A Study On The Weld Crackings Of Cast Nickel-Base Superalloys, Ikawa, H., Shin,S. and Nakao, Y.IX-629-69, On The Toughness And Micro-Structure In Low Carbon Steels Subjected To Weld Thermal Cycles, Mimura, H. and Aoki, K.IX-630-69, Notch Toughness Of Simulated Heat-Affected Zones Of 13% Chromium Cast AlloySteels, Nemoto, T., Watanabe, K. and Asakura, S.IX-631-69, A Prediction Of Welding Procedure To Avoid Heat Affected Zone Cracking, Ito, Y. and Bessyo, K.IX-632-69, Weld Bond Fracture And A New 80 kg/mm2 High Strength Steel For Submerged Arc Welding, Goda, S., Sato, M., Nakai, T., Ando, A. and Minehisa, S.IX-633-69, Fundamental Investigations On Solidification Structure In Weld Metal, Matsuda, F., Hashimoto, T. and Senda, T.IX-636-69, Effect Of Cold Working On Stress Corrosion Cracking Of Austenitic Stainless Steels And Welded Joints, Watanabe, M. and Mukai, Y.IX-637-69, Study On The Notch Toughness Of 9% Nickel Low Carbon Steel, Watanabe, M., Watanabe, I. and Harasawa, H.IX-639-69, Choice Of Welding Conditions With A View To Crackability And Notch Toughness Of The Welded Joints On Bainitic Steel With A Yield Point Of 55 kp/mm2, Ondrejcek, P.IX-641-69, The Perspective Development Of The Steels Weldability, Hrivnak, I.IX-643-69, The Study Of The Properties Of Steel Plates In The Thickness Direction, In Relation To Their Weldability, Vrbensky, J.IX-647-69, Hardenability Of Carbon-Manganese Steels And Microalloyed Carbon-Manganese Steels In Welding, Nilsson, K.IX-649-69, Brittle Fracture Strength Of Welded Joints, Ikeda, K. and Kihara, H.IX-650-69, Brittle Fracture Initiation In Unnotched Wide Plate Butt Joint Of 80kg/mm2 StrengthSteel, Ogura, N. and Koshiga, F.IX-652-69, Micro Hot Tearing In The Weld Heat Affected Zone, Vinckier, A.IX-656-69, The Mechanical Properties Of A Heavy Plate Perpendicular To The Rolling Surface, Vandersteene, J.R.IX-657-69, Strength And Deformation Of Structural Steels In The Direction Of Thickness, Nagel, D. and Schonherr, W.IX-658-69, Hot Cracks In Welded Joints Of Refractory Metals, Chernyshova, T.A. and Shorshorov, M.Kh.IX-662-69, Report On Current Methods Used In The Assessment Of Weldments For Susceptibility To Brittle Fracture, Anon.IX-663-69, The Deformability Of Sold-Liquid Alloys Of Binary Systems, Prokhorov, N.N. and Prokhorov, N.Nikol.

Page 94

IX-665-69, Reheat Cracking In Welded Structures, Nichols, R.W.IX-666-69, The Technological Strength Of Metals While Crystallising During Welding, Prokhorov, N.N. and Prokhorov, N.Nikol.IX-670-70, Al:Zn:Mg Light Strong Weldable Alloys For Industry, Baker, R.G. and Weld, F.IX-671-70, An Assessment Of Brittle Fracture Testing Techniques, Baker, R.G., Dawes, M.G., Dolby, R.E., Egan, G.R., Harrison, J.D. and Saunders, G.G.IX-672-70, Testing Method Of Weldcracking By Welding Shipbuilding Steels, Gololobov, B.A.IX-673-70, Weldable QT High Strength Steels And Their Applications In Japan, Anon.IX-674-70, On The Fillet Weld Cracking Of 50 kg/mm2 Grade High Strength Steels - On The Heel-Crack-, Kihara, H., Inagaki, M., Horikawa, K. and Kuriyama, Y.IX-675-70, Study On Omega Embrittlement Of Welded Titanium Alloys And Omega Phase, Ikawa, H., Shin, S., Morikawa, M. and Miyagi, M.IX-676-70, Development Of A High-Toughness, High Strength Steel (HY-130) For Deep Sea Use, Yada, H., Yoshimura, H. and Kimura, I.IX-677-70, Study On Preheating Temperature In Welds Of High Strength Steel Structure, Kihara, H., Terai, K., Yamada, S. and Nagano, T.IX-678-70, Study On Weld Cracking In Multiple Pass Welds Of High-Strength Steel, Satoh, K.,Terai, K., Yamada, S., Nagano, T. and Matsumura, H.IX-679-70, A Study Of Bond Brittleness In Welded High Strength Steel And The Development Of Buttering Plus Welding Processes, Ito, Y., Ikeda, M., Bessyo, K. and Nakanishi, M.IX-680-70, Effect Of Aluminium On Weldability Of Structural Steel, Hasebe, S.IX-681-70, A Study Of Weld Cracking In High-Strength Steel For Architectural Steel Constructions, Nakayama, H., Matsumoto, M. and Inagaki, M.IX-682-70, A New Electroslag Welding Method - HINES Welding - Which Overcome The BondBrittleness, Problem On The Welding Of 80 kg/mm2 High Tensile, IX-683-70, 70 km/mm2 High Strength Steel For Penstocks, Okumura, T., Horikawa, K., Kuwayama, N., Tamamoto, S., Ito, Y. and Kimura, H.IX-684-70, Acoustic Emission From Steel Pressure Vessels, Nielsen, A., Latham, F.G. and Kirby, N.IX-685-70, Metallurgy Of Weld Metal, Hrivnak, I.IX-687-70, A Metallurgical Aspect Of Hot Cracking And Toughness Of Weld Metal, Masumoto,I. and Imai, K.IX-688-70, X-Ray Investigations On Solidification Structures In Weld Metal, Nakagawa, H., Kato, M., Matsuda, F. and Senda, T.IX-689-70, Testing Of Weldments Using Standard COD And Niblink Test Pieces, Ingham, T. and Watkins, B.IX-690-70, International Institute Of Welding Sub-Commission X D Progress Report 1970, Anon.IX-692-70, Cooperative Study Of Brittle Fracture In Service. Cassure De Deux Toles De FondD'Un Bloc De Petrolier Au Droit D'Une Soudure Longitudinale, Anon.IX-693-70, IIW Sub-Commission X D Questionnaire On Occurrence Of Brittle And Other Fractures, Anon.IX-694-70, The Significance Of The Heat Affected Zone In Fracture Initiation, Watkins, B.IX-695-70, Contribution A L'Etude Sur La Trempabilite Des Aciers Au Cours Du Soudage, Zvokelj, J.IX-697-70, Simulation Des Phenomenes Dans La Zone Affectee Par La Chaleur Lors Du Soudage D'Acier, Ruge, J.L. and Gnir(, G.E.

Page 95

IX-698-70, Implant Weldability Testing Of Carbon-Manganese Steels, Evans, G.M., Simonsen,T. and Augland, B.IX-700-70, Stress-Wave Characteristics Of Fracture Instability In Constructional Alloys, Hartbower, C.E., Reuter, W.G. and Crimmins, P.P.IX-701-70, A Survey Of The Studies On Tensile Behaviors Of Composite Weldments, Where Steels Of Different Strength Are Longitudinally Joined, Kanazawa, T.IX-702-70, Weldability Of HY-80 Steel, Ivens, P.F.IX-704-70, Recommendations For The Classification Of Steels For Use In Welded Structures, Anon.IX-705-70, Questionnaire On Brittle Fracture And Welding Information, Anon.IX-707-70, Note On The Plotting Of Continuous Cooling Transformation Diagrams To Study The Weldability Of Steels (Draft), Anon.IX-708-70, Etude De La Soudabilite Des Aciers Par La Methode Des Implants: Results ActuelsEt Perspectives Nouvelles, Granjon, H., Debiez, S. and Gaillard, R.IX-709-70, Note Sur Les Essais De Fissuration, Anon.IX-711-70, Comments Of The French Delegation On Document IX-620-69. Cooperative StudyOf Corrosion Welded Assemblies In Service, Messager, C.IX-712-70, La Raptue Fragile Des Toles Soudees. - Qualification Du Metal Depose Par Procede Automatique, Hofmans, M.IX-717-70, Employment Of The Crackability Parameters Pc And/Or Pw Evaluating The ResultsOf The Tekken, Lehigh and CTS Tests, Ondrejcek, P.IX-718-70, The Investigation Of The Specimen Applicability And Properties To Evaluate The Metal Technological Strength Under The Crystallization Process While Welding, Prokhorov, N.N., Orlov, A.S. and Prokhorov, N.Nikol.IX-725-70, A Contribution To Evaluation Of The Heat Affected Zone During Welding Of High Strength Steel, Hyspecka, L. and Mazanec, K.IX-726-70, Cumulation Of Welded Joint Failures On Steels Functioning In The Creep Range, Zapletalek, A.IX-727-70, Metallurgical Aspects Of Hot Crack Formation In Welded Joints Of Micro-Alloy Steels, Hrivnak, I.IX-729-70, Current-Radio Test And Its Application To The Examination Of The Zone CorrosionOccurring In Welded High-Strength Structural Steels When Used In Sea Water, Raty, R., Hakala, J. and Miekk-Oja. H.M.IX-730-71, Determination Of Preheating Conditions To Avoid Weld Cracking In Steel Constructions, Satoh, K., Matsui, S., Ito, Y., Bessyo, K., Sakurai, R. and Takahara, S.IX-731-71, Testing Results Of Atmospheric Exposure On The Welded Joints Of Weathering Steels And Weld Metals (After Three Year Exposure), Ohwa, T., Miyoshi, M. and Ogata, Y.IX-732-71, Creep Rupture Properties Of Welded Joints Of Quenched And Tempered High Strength Steel, Okane, I. and Inagaki, M.IX-733-71, Cracking Behavior Of Multipass Fillet In HY80 Type HT70 Steels, Tamura, H. and Kobayashi, T.IX-734-71, Toe And Underbead Cracking In Low-Alloy Steels, Kobayashi, T. and Aoshima, I.IX-735-71, Effects Of Restraint Stress On Delayed Cracks In The Welds Of 80kg/mm2 High-Strength Large Gauge Plate Steel, Inagaki, M., Nakamura, H., Sasaki, H., Watanabe, K.,Kirihara, S. and Sejima, I.IX-736-71, Notch Toughness And Fracture Characteristics Of Al-Zn-Mg Alloy And Its Welds, Fukui, T., Sugiyama, Y. and Terai, S.

Page 96

IX-737-71, Weld Cracking Behavior Of 100 kg/mm2 High Strength Steel By Large Size Restraint Testing Machine, Satoh, K., Matsui, S., Terai, K., Yamada, S. and Matsumura, H.IX-739-71, Study On Weldability Of Dispersion Hardening Alloy, Ikawa, H., Shin, S., Habu, M. and Nishimoto, K.IX-740-71, Preliminary Tests In The Use Of Stress-Wave Emission Analysis For The DetectionOf Cracking During Welding, Winn, W.H., Sawyer, F.B. and Richards, C.M.IX-741-71, The Effect Of Stress-Relieving Heat Treatment On The Mechanical Properties Of Pressure Vessel Steels, Ulff, C.IX-742-71, Hardenability In Welding Of Carbon-Manganese Steels, Friis, L.-E.IX-743-71, Corrosion Behaviour Of Heat-Affected Zones In Welded Ships, Relander, K. and Onnela, K.IX-744-71, The Analysis By Acoustic Emmission Of Delayed Cracking, Ruge, J. and Jurgens, V.IX-745-71, Welding Of High Purity Nickel, Nishio, Y., Ohmae, T. and Toyama, S.IX-746-71, Studies On 70 To 80 kg/mm2 High Strength Steels And Their Welding, Kawai, K. and Shimoyama, T.IX-747-71, Some Observation On Weldabilities Of Thick High Strength Steels And Welding Procedures Applying To Steel Structures For Civil Engineering, Oba, H., Susei, S., Fujishiro, Y. and Yasuda, T.IX-748-71, Cold Cracking In Welding Of Steels, Granjon, H.IX-749-71, An Experiment On One-Sided Submerged Arc Welding With FAB (Flux Asbestos Backing), Nakamuta, H., Nakano, M. and Fujii, K.IX-750-71, Development Of CaF2-Ti-B Type Submerged Arc Tubular Wire With High Notch Toughness, Suzuki, H., Sekino, S., Mori, N., Honma, H., Tanigaki, T. and Sugioka, I.IX-751-71, Revised Version Of Document IX-710-70 Notes On Cracking Test, Anon.IX-752-71, Compilation Of Cold Cracking Tests, Linden, H. and Schonherr, W.IX-753-71, Casebook Of Brittle Fracture Failure, Anon.IX-759-71, Essais De Soudabilite Par Implants Effectues Au Laboratoire De La Societe Babcock - Atlantique, Bouverot, R.IX-760-71, Acoustic Emission For Crack Detection - Proposals For Future I.I.W. Actions, Nichols, R.W.IX-761-71, Informations Sur Les Travaux Du Sous-Comite ISO/TC 17/SC 3 Aciers De Construction Reunion Du 26 Au 29/4/71 A Paris, Anon.IX-766-71, Type Testing For Assessment Of Weldability And Resistance To Brittle Fracture, Salkin, M., Spanraft, M., Vrbensky, M. and Cepolina, M.IX-767-71, Welding Of Cast Iron, Svensson, I. and Gjuteriforeningen, S.IX-768-71, Data Bank Of Fracture Data, Gurney, T.R., Egan, G.R. and Doherty, J.IX-777-71, Principles Of Selection The Austenitic Metal Welded To The Non-Austenitic One InWelding Dissimilar Steels, Gotalsky, Yu.N.IX-778-72, Some Steelmakers' Experience On Improving The Resistance Of Steel Plate To Lamellar Tearing, Bellen, A., Spanraft, M.J. and van der Veen, J.H.IX-779-72, Subdepartment Joining Technics Of The Federal Institute For Material Testing, vonder Linden, H. and Schonherr, E.IX-780-72, Effects Of Welding Procedure And Steel Materials On Prevention Of Lameller Tearing, Amemiya, Y., Satake, M., Kajimoto, K. and Ohba, K.IX-781-72, Creep Rupture Of The Welded Joint With Electrodes For 32Ni-20Cr Alloy, Shin, S. and Shinohara, N.

Page 97

IX-783-72, A Newly Developed Method Of Reducing Weld Bond Brittleness - The Development Of Welding Apparatus For BPW-N Process-, Ito, Y., Ikeda, M. and Bessyo, K.IX-784-72, Effects Of Restraint Stress And Intensity Of Restraint On Delayed Cracks In The Welds Of 80kg/mm2 High-Strength Plate Steel, Sasaki, H., Watanabe, K., Kirihara, S. and Sejima, I.IX-785-72, On The Martensite-Like Structure At Weld Bond And The Macroscopic SegregationIn Weld Metal In The Welded Dissimilar Metals Of ( - Steels And (-Steels, Ikawa, H., Shin, S., Inui, M., Takeda, Y. and Nakano, A.IX-786-72, Further Studies Of Cracking Behavior In Multipass Fillet Weld, Kobayashi, T., Nishikawa, K. and Tamura, H.IX-787-72, A Study Of Prevention Of Weld Cracking In High-Strength Steel For Steel Structures Of Building, Nakayama, H., Matsumoto, M., Kamata, M., Sofuku, M. and Inagaki, M.IX-789-72, Measurement Of Restraint Of Weld Joints In Spherical Pressure Vessel Made Of WEL-TEN 80C Steel, Suzuki, H., Matsuoka, M., Nakamura, H., Yamakami, T. and Takahashi, D.IX-790-72, The Diffusivity Of Hydrogen And Its Effect On The Embrittlement Of Steel, Kikuta, Y., Araki, T. and Ochiai, S.-I.IX-791-72, A New Approach To The Investigation Of Hot Cracking In Weld Metal Of AutomaticWelding, Terai, K., Toyooka, T., Yamada, S. and Matsumura, H.IX-792-72, Effect Of Aluminum And Titanium On Weld Cracking Of Nickel And Monel Weld Metal, Adachi, M. and Inui, M.IX-793-72, Transient Thermal Stress Of Weld Heat-Affected Zone With Particular Reference To Weld Cracking In High Strength Steels, Satoh, K. and Nakamura, H.IX-794-72, Crack And Hydrogen In Submerged Arc Welding Of HT-80 Steel, Tsuboi, J. and Terashima, H.IX-795-72, Gas Metal Arc Welding Of 9% Ni Steel Using Ferritic Filler Metal, Watanabe, M., Tanaka, J. and Watanabe, I.IX-796-72, The Effects Of Hydrogen And Carbon On The Fracture Toughness, Nakamura, H., Naiki, T., Okabayashi, H. and Kuribayashi, M.IX-797-72, The Interaction Of Hydrogen And Dislocation, And Its Parallelism With Hydrogen Embrittlement In Iron And Steels, Kikuta, Y., Sugimoto, K., Ochiai, S.-I. and Iwata, K.IX-798-72, Influence Of Niobium On The Microstructure And Mechanical Properties Of Submerged Arc Weld Metals For CMn Steels, Hannerz, N., Valland, G. and Easterling, K.IX-799-72, The Choice Of Safe Welding Procedures When Making Fillet Welds In C-Mn Structural Steels, In Order To Avoid Hydrogen Cracking, Haverhals, J.IX-800-72, Weldability - Vision And Research, Spanraft, M.J.IX-802-72, A Note On Acoustic Emission Measurements At REML, Kirby, N. and Bentley, P.G.IX-803-72, Acoustic Emission As An Aid To Pressure Vessel Inspection, Bentley, P.G., Burnup, T.E., Burton, E.J., Cowan, A. and Kirby, N.IX-810-72, Correlation Of The Cruciform Test With The Implant Test, Aavatsmark, N.E. and Evans, G.M.IX-811-72, On The Nature And Analysis Methods Of The Process Cold Cracking In Steels During Welding, Prokhorov, N.N., Makarov, E.L. and Federov, V.G.IX-812-72, Inventaire Des Questions A Etudier Dans La Perspective De L'Unification De L'Essai Sur Implants Comee Essai Complementaire D'Information Pour La Classification Des Aciers, Granjon, H.

Page 98

IX-814-72, Correlation Of The C.T.S. Test With The Implant Test, Evans, G.M.IX-821-73, The Effect Of Silicate Type Globular Inclusions On Plastic Properties Of Weld Metal, Hrivnak, I.IX-822-73, On The Assessment Of HAZ Microstructure In C-Mn Steels, Ronningen, J.-A., Simonsen, T. and Christensen, N.IX-823-73, Correlation Of Microstructure With HAZ Embrittlement, Evans, G.M. and Christensen, N.IX-824-73, Implant Testing Based On Delayed Fracture, Anon.IX-825-73, Questionnaire On Cases Of Corrosion In Welded Assemblies, Dusseldorf, B.IX-828-73, Tensile Tests On Brodeau Test Specimens Removed From Rolled Steel Materials, Amiot, P., Brodeau, A., de Leiris, H. and Le Penven, Y.IX-829-73, Application De L'Essai Brodeau A L'Etude De L'Arrachement Lamellaire Sur Assemblages Soudes En Acier, Anon.IX-830-73, Recommandation Pour La Mise En Oeuvre De L'Essai Sur Implants Comme Essai Complementaire D'Information Sur La Sensibilite A La Fissuration A Froid Lors Du Soudage Des Aciers / Recommendation For The Use Of Implant Test As A Complementary Information Test On The Cold Cracking Susceptibility During The Welding Of Steels, Anon.IX-831-73, Japanese Report On Cold Cracking For Sub-Commission IX F, Inagaki, M.IX-832-73, Japanese Report On Lamellar Tearing For Sub-Commission IX-F, Inagaki, M.IX-834-73, JSSC Guidance Report On Determination Of Safe Preheating Conditions Without Weld Cracks In Steel Structures, Satoh, K., Matsui, S., Horikawa, H., Bessyo, K. and Okumura, T.IX-835-73, Characteristics Of 50 kg/mm2 High Tensile Strength Crack-Free Steels, Onoe, Y., Shiomi, Y. and Sato, M.IX-836-73, Formulation Of Hydrogen Stress (Strain) - Diffusion In Steel, And Its Solutions By Computer Aided Finite Element Method, Kikuta, Y., Ochiai, S.-I. and Yoshinaga, S.IX-837-73, Acoustic Emission Detection Of Crack Propagation Modes In Hydrogen Delayed Cracking, Kikuta, Y., Ochiai, S.-I. and Asano, S.IX-838-73, Study On Newly Developed MRT Cracking Test, Ujiie, A., Sato, S., Shimoyama, T.,Sakamoto, N. and Takano, G.IX-839-73, Lamellar Tearing And Through-Thickness Properties, Hasebe, S., Bessyo, K., Nito,N., Asai, Y. and Nakamura, M.IX-840-73, On The Assessment Of The Lamellar Tearing Susceptibility Of Steel Plate, Kanazawa, S., Yamato, K., Takeshi, Y., Inoue, T., Takeda, T. and Hashimoto, K.IX-841-73, On The Lameller Tearing In Multirun Fillet Welds, Kihara, H. and Nishio, Y.IX-842-73, The Effects Of Alloying Elements On Charpy Impact Properties Of Welded Bond, Ito, Y., Ikeda, M., Nakanishi, M. and Kohyama, A.IX-843-73, Studies Of Overlaid Cladding In A Nuclear Reactor Vessel, Inagaki, M., Fujimura, T. and Kodaira, T.IX-844-73, Study On Metallurgical Factors Affecting The Mechanical Properties Of Weld-Solidified Metal In Aluminum Alloys, Fukui, T. and Namba, K.IX-845-73, Influence Of External Restraint On The Cold Cracking Behavior Of Eight Types Of Normalized Steel, Fikkers, A.T.IX-846-73, Effects Of Restraint Intensity On Delayed Cracks In The Welds Of High-Strength Steel, Sasaki, H., Watanabe, K., Kirihara, S., Sejima, I. and Rokutani, T.IX-847-73, Proposal Of Sub-Commission IX F For A Complementary Information Test For Lamellar Tearing, Anon.

Page 99

IX-848-73, Progress Report Of Sub-Commission IX F Concerning Complementary Information Tests On Embrittlement In The Heat Activated Zone (HAZ), Anon.IX-850-73, Susceptibility Of Austenitic Welded Joints To Hot Cracking, Dahl, W., Duren, C. and Musch, H.IX-851-73, Characteristics Of Post-Weld Aging Of A Metastable Beta Titanium Alloy, Greenfield, M.A. and Pierce, C.M.IX-852-73, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Case no.86 High Pressure Heat Exchangers, Anon.IX-853-73, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Case No. 97 Orthotropic Floor, Anon.IX-853-73, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Case No.87 Storage Tank Of Vinyl Chloride Monomer, Anon.IX-854-73, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Case No.98 Brittle Fracture Of Pipeline During Pressure Test, Anon.IX-856-73, On The Tendency Of Steels To Lamellar Tearing In Welded Constructions - Cases Of Damage; Testing Method; Results For St 37 -, Schonherr, W.IX-857-73, Compilation Of Hot Cracking Tests, Wilken, K. and Schonherr, W.IX-858-73, Introduction De L'Emission Acoustique Comme Moyen De Prevision De L'Aptitude D'Une Tole D'Acier A Resister A L'Arrachement Lamellaire, Cadiou, L., Samman, J. and Leymonie, C.IX-859-73, Comparison Of Cracking Tests Used For Aluminum Alloys. Part I., van der Torre, D.IX-861-73, Some Considerations Concerning Metallurgical Problems Of The Weld Metal, Spanraft, M.J.IX-863-73, Solidification Structure And Texture Of Stainless Steel Weld Claddings As Applied To Nuclear Reactor Vessels, Schmitt-Thomas, Kh.G., Ruckdeschel, W. and Doffin, K.IX-872-74, Japanese Comments On Through-Thickness Tensile Test For Evaluating Lamellar Tearing Susceptibility, Inagaki, M.IX-873-74, Lamellar Tear Resisting Steels And The Direction For Use Of Them, Kanazawa, S., Kawamura, K., Yamato, K., Haze, T., Inoue, T., Nuibe, T. and Fukuda, T.IX-874-74, Correlation Of The Implant Test With The RRC And The TRC Tests, Satoh, K., Matsui, S., Horikawa, K., Takagi, O., Terai, K., Yamada, S. and Ohkuma, Y.IX-876-74, On The Prevention Of Hydrogen-Induced Weld Cracking In Steel Weldments, Fujii,T.IX-876-74, On The Prevention Of Hydrogen-Induced Weld Cracking In Steel Weldments, Fujii,T.IX-877-74, Development Of Crack-Free 60 kg/mm2 Class High Tensile Strength Steel, Ono, Y., Sogo, Y., Masumoto, H., Sekino, S., Minamida, K., Yano, S. and Moriyama, Y.IX-877-74, Development Of Crack-Free 60 kg/mm2 Class High Tensile Strength Steel, Ono, Y., Sogo, Y., Masumoto, H., Sekino, S., Minamida, K., Yano, S. and Moriyama, Y.IX-878-74, Fracture Initiation Characteristics Of Heat Affected Zone Assessed By C.O.D. Test,Miyoshi, E., Hasebe, S., Bessyo, K. and Yamaguchi, Y.IX-879-74, COD Test For Girth Weldment Of Linepipes, Matsushita, K., Nishiyama, N. and Tsuboi, J.IX-880-74, Notch Toughness Of Niobium Bearing Steel Weldments, Shiga, A., Imura, H. and Tsuboi, J.

Page 100

IX-881-74, Notch Toughness Of Simulated Heat-Affected Zones Of 13Cr-Ni Cast Steel, Sejima, I. and Asakura, S.IX-882-74, Fracture Characteristics Of Thick Aluminum Alloy 5083/5183 Welds, Kuriyama, Y., Minoda, K., Irisawa, T., Nagaoka, H. and Tsuchiya, K.IX-883-74, Description Of 4 Not Self Restraint Hot Cracking Tests, Wilken, K. and Schonherr, W.IX-884-74, Precipitation Processes In Welded Joints And Their Effect On Mechanical Properties Of Steels, Hrivnak, I.IX-885-74, Effect Of Composition And Hot-Rolling Practice On The Weld Heat-Affected Zone Toughness Of Pearlite-Reduced Steels, Sawhill, J.M. and Wada, T.IX-887-74, Investigation Of 40-Years Exposed Material, Regenboog, T.P.T. and van der Torre,D.IX-888-74, Vanadium In Mild-Steel Weld-Metal, Hannerz, N.E., Granges, A.B. and Jonsson-Holmquist, B.M.IX-889-74, Development And Use Of The Implant Cracking Test, Hart, P.M and Watkinson, F.IX-890-74, The Use Of Small-Scale Destructive Tests To Assess Susceptibility To Lamellar Tearing, Farrar, J.C.M., Ginn, J. and Dolby, R.E.IX-891-74, Metallurgical Factors Controlling The Heat Affected Zone Fracture Toughness Of Carbon: Manganese And Low Alloy Steels, Dolby, R.E. and Saunders, G.G.IX-898-74, Influence Of Phase Transformations On Residual Stresses On Welding Of Steels, Hougardy, H.P., Rappe, H.-A. and Rose, A.IX-899-74, Evaluation Par La Methode Du Double Implant Du Risque De Fissuration Lors Du Traitement De Relaxation Des Ensembles Soudes Sur Acier, Granjon, H. and Debiez, S.IX-900-74, Questionnaire On Cases Of Fractures By Lamellar Tearing In Service Or During Fabrication, Anon.IX-901-74, Hydrogen Induced Cracking In Weld Metal, Fikkers, A.T. and Muller, T.IX-902-74, Recommendations For The Use Of Charpy V Impact Test As A Complementary Information Test On Embrittlement Of The Heat Affected Zone (HAZ) Of Weldments On Steel. Part I- Background Of The Document, Anon.IX-903-74, Toughness Of The Heat Affected Zone Of Welds In C And C-Mn Steels. ProposedSelection Of Material groups And Heat Affected Zone Toughness Levels With Respect To ThePrevention Of Brittle Fracture, Ivens, P.F. and van den Bergh, A.A.IX-904-74, Thermomechanical Processing Of A Welded Metastable Beta Titanium Alloy, Greenfield, M.A. and Haggard, D.K.IX-905-74, Application Des Essais D' Implant A La Determination De La Sensibilite A La Fissuration A Froid Lors Du Soudage D'Aciers A Haute Limite D'Elasticite, Bragard, A., Caubo,M., Marquet, F. and Romanini, l.IX-906-74, Weldability Of High-Strength Steels At Low Temperatures, Anon.IX-907-74, Contribution A L'Etude De Rupture Fragile Des Joints Soudes Sur Aciers De HauteResistence - Etude Par Methode D' Implant, Dragoslav, M.IX-908-74, Report 60: Weldability Of Reinforcing Steel Tack-Welded Connection, Anon.IX-916-75, The Weldability Of Reinforcing Steel. Part I., Anon.IX-918-75, Answers To The Questionnaire On Lamellar Tearing In Japan, Inagaki, M., Tamura, H., Yamato, K., Tanaka, J., Shimoyama, T., Inoue, T. and Kitada, T.IX-919-75, Actual Circumstances And Future Research Trend On The Problems Of Lamellar Tearing, Inagaki, M., Tamura, H., Yamato, K., Tanaka, J., Shimoyama, T., Inoue, T. and Kitada, T.

Page 101

IX-920-75, Studies Of Delayed Crack In Welds Of High Strength Steel, Watanabe, K., Kirihara, S., Onuma, T. and Satoh, K.IX-921-75, Welding And Weldability Of Cast Iron. Introductory Paper On The Possible Activities Of Commission IX, Anon.IX-922-75, Development Of The G-BOP Test For Weld Metal Cracking, McParlan, M. and Graville, B.A.IX-925-75, Ductility And Toughness Of Ferritic Stainless Steel Welds, Sawhill, J.M. and Bond, A.P.IX-927-75, Literature Survey Of Strain And Restraint Measurements In Welded Joints, Schofield, K.G.IX-928-75, Resistance Of Electroslag Welding Plates To Brittle Fracture, Mryka, J.IX-929-75, La Fissuration A Froid Des Aciers En Relation Avec Leurs Caracteristiques De Transformation, Bernard, G., Gauthier, G. and Prudhomme, M.IX-931-75, Synthese Bibliographique Sur La Soudabilite Des Aciers Sous L'Eau, Dadian, M.IX-932-75, Report On The Activities In Relation To The Weldability Of Concrete Reinforcing Bars, van Lent, P.H.IX-933-75, Reprinted From Metal Science. Influence Of Vanadium On The Heat-Affected Zone Properties Of Mild Steel, Hannerz, N.E. and Jonsson-Holmquist, B.M.IX-933-75, Reprinted From Metal Science. X-Ray Examination During Fatigue, Taira, S.IX-933-75, Reprinted From Metal Science. Steady-State Creep Of Dispersion-Strengthened Alloy, Anon.IX-934-75, Aluminothermic Welding Of New Reinforcing Steels, Janicko, S.IX-938-75, Sur Le Dursissement De La Zone Thermiquement Affectee Des Aciers Au CarboneEt Aciers Au Carbone-Manganese Avec la Resistance De 370-520 N/mm2, Morariu, St.IX-940-75, Effect Of The Straightening Operations Of Heavy Welded Shapes On The Mechanical Properties Of Used Steel, Safta, V. and Fleser, T.IX-941-75, The Influence Of The Simulated Thermic Cycle On A QT - Steel, Hrelescu, M.IX-948-76, (th -Value As Criterion For Judging The Lamellar Tearing Tendency Of Steel Structures, Schonherr, W.IX-949-76, Effect Of Pre- And Post- Heating On Weld Cracking Of Low Alloy Steels -Some Basic Problems In The Application Of Pre- And Post- Heating To Weldment For The Prevention Of Cold Cracks-, Kume, R., Okabayashi, H. and Naiki, T.IX-950-76, Electroslag Welding Of Heavy Section 2 1/4 Cr-1Mo Steels, Okumura, M., Kumagai, M., Nakamura, H. and Kohira, K.IX-951-76, A Numerical Analysis Of The Diffusion And Trapping Of Hydrogen In Steels And Steel Weldments, Kohira, K., Yatake, T. and Yurioka, N.IX-952-76, Development Of New Steels For High Heating Input Welding, Kanazawa, S., Nakashima, A., Mimura, H., Yamato, K., Okamoto, K. and Hagiwara, Y.IX-953-76, Study On Prevention Of Weld Cracking In Thick Plate Weldment Of Low Alloy Steel, Okamoto, Z., Yoshida, Y. and Miura, Y.IX-954-76, Automatic Gas Pressure Welding For Concrete Reinforcing Bars, Takano, S., Yokokawa, T. and Ikeno, T.IX-955-76, Characteristic Correlation Diagram Between (G Value And Weld Heat Input On Susceptibility To Reheat Cracking Of Mn-Mo Steels, Ujiie, A., Sato, S. and Matsumoto, O.IX-956-76, Studies Of Delayed Crack In Welds Of High-Strength Steel -Correlation For Method Of Various Weld Cracking-, Kirihara, S., Onuma, T., Watanabe, K. and Satoh, K.IX-957-76, Effect Of Weld Metal Heat Input On Weld Cracking And Restraint Stress, Kirihara,

Page 102

S., Onuma, T., Watanabe, K. and Satoh, K.IX-958-76, Japanese Comments On The Second Draft Of ISO/TC17/SC3 Concerning Quenched And Tempered Steels, Anon.IX-959-76, Implant Test For Studying Cold Cracking, Tanaka, J. and Kitada, T.IX-960-76, Effect Of Intensity Of Bending Restraint On Weld Cracking In Multipass Weld, Satoh, K., Matsui, S., Nishimura, I., Iiyama, H., Chiba, N., Hasebe, S. and Bessyo, K.IX-961-76, Effect Of Temperature On Corrosion Fatigue Properties Of Mild Steel, Watanabe, M., Mukai, Y. And Naganuma, M.IX-962-76, Effect Of Filler Wire Composition On Mechanical Properties Of Thick Al-Mg Alloy 5083-0 Welds - In Case Of Conventional MIG Welding-, Sakaguchi, A. and Go, T.IX-963-76, Effect Of Filler Wire Composition On Mechanical Properties Of Thick Al-Mg Alloy 5083-0 Weldments -In Case Of High Current MIG Welding-, Nagaoka, H., Wakino, Y. and Oasa, H.IX-964-76, Study Of Test Methods For Welding Cracks Of Weldable Structural Aluminum Alloys, Anon.IX-965-76, Application Of The Y-Groove Restraint Cracking Test For Heavy Plates, Horikawa, H., Matsui, S., Murase, S., Nakajima, H. and Satoh, S.IX-966-76, Correlation Of Various Weld Cracking Tests, Horikawa, K., Akazawa, J., Matsui, S. And Ohkuma, Y.IX-967-76, Survey On Present Practice Of Jointing Reinforcing Steel Bars In Japan, Anon.IX-968-76, Effect Of Copper On The Weldability Of Line Pipe, Miyoshi, E., Hasebe, S. and Bessyo, K.IX-969-76, Study On Estimation Of Lower Critical Stress For Cold Cracking At Welds By Implant Test Method, Ito, Y., Ikeda, M. and Nakanishi, M.IX-970-76, Recent Trend Of Research On Cold Cracking With The Implant Test In Japan -CSW Implant Test Working Group Report-, Matsui, S. and Inagaki, M.IX-971-76, Evaluation Of Butt Welds Based Upon A Strain Criterion, Soete, E. and Denys, R.IX-972-76, Susceptibility To Reheat Cracking Of Nuclear Pressure Vessel Steels, Vinckier, A. and Dhooge, A.IX-974-76, Influence Of Hot Straining Embrittlement On Brittle Fracture In Welded Steel Plates, Satoh, K., Toyoda, M., Kawaguchi, Y. and Arimochi, K.IX-975-76, The Study Of Steels Weldability By Simulation Of Thermal Deformation Cycles Of Welding On The Equipement Thermorestor-W, Bernasovsky, P., Hrivnak, I. and Ondrejcek, P.IX-976-76, Zmeny Mechanickych Vlastnosti Zuslachtenych Oceli Vyvolane Imitaciou Zvarania /Changes In Mechanical Properties Of Quenched And Tempered Steels Und Imitated InfluenceOf Welding, Ondrejcek, P., Remias, S. and Blecha, A.IX-977-76, Cold Cracking Tests To Select Welding Conditions, Fikkers, A.T. and Muller, T.IX-978-76, The Effect Of Precipitation On The Mechanical Properties Of Weld Metal, Hrivnak, I.IX-980-76, IIW Guide To The Welding And Weldability Of Quenched And Tempered C-Mn, Microalloyed And Low Alloyed Steel. Part A Metallurgical Background, Kullberg, G., Hannerz, N.E. and von Sydow, L.IX-982-76, Note De La Sous-Commission IX-B (Metallurgie Physique Du Soudage Des Aciers)Sur La Pratique Actuelle Des Essais De Fissuration A Froid Sur Implants, Granjon, H.IX-983-76, Weldability Testing By Implant Method, Christensen, N.IX-984-76, Aspects Metallurgiques Du Metal Fondu En Soudage Sous Flux, Bernard, G. and Chevet, B.

Page 103

IX-986-76, Studies On Structural Restraint Relating To Weld Cracking In Japan (Preliminary Report), Satoh, K., Ueda, Y., Matsui, S., Natsume, M., Terasaki, T., Fukuda, K. and Tsuji, M.IX-987-76, Thermal Cycles In Arc Welding Calculation Of Cooling Times, Uwer, D. and Degenkolbe, J.IX-988-76, Influence Of Vanadium On The Weldability Of Constructional Steels, Hannerz, N.E.and Ferenc, K.IX-989-76, Working Group: Welding Of Stainless Steels Interim Report For The Sydney Meeting, Rosendahl, C.-H.IX-991-76, Collection Of Creep Data, Rosendahl, C.-H.IX-996-76, Formation Of Microcracks During Stress-Relief Annealing Of A Weldment In Pressure Vessel Steel Of Type A508 Cl 2, Lilijestrand, L.G., Aucouturier, M., Ostberg, G. and Lindhagen, P.IX-997-76, List Of Documents At The 24th Of June 1976, Anon.IX-999-76, The Fracture Mechanical Significance Of Cracks Formed During Stress-Relief Annealing Of A Submerged Arc Weldment In Pressure Vessel Steel Of Type A508 Cl 2, Liljestrand, L.-G. and Ostberg, G.IX-A-14-90, A Metallurgical Approach Of The Parameters Affecting The Fracture Behaviour OfBase Metal And Welded Components, Defourny, J., D'Haeyer, R. and Leroy, V.IX-A-15-90, Literature Data Concerning The Problem Of Local Brittle Zones (LBZS), D'Haeyer,R. and Defourny, J.IX-A-21-90, Sub-Commission IXA Recommendations For The Metallurgy Of Welding And The Weldability Of Ferritic Steels Annual Report 1990, Defourny, J.IX-A-33-91, Annual Report Of SCIXA -1991-, Anon.IX-B-109-86, Determination Of Cold Cracking Susceptibility By PRRC Test, Wen-yue, Z., Ze-yu, Wen-kao, H. and Bang-gu, C.IX-B-110-85, Interpolation Models For Evaluating The HAZ Phase Composition In Low Alloy Steel Arc Welding, Kasatkin, O.G. and Seyffarth, P.IX-B-111-85, Effect Of HAZ Chemical And Phase Composition On Its Mechanical Properties InLow-Alloy Steel Arc Welding, Kasatkin, O.G. and Seyffarth, P.IX-B-122-86, Comparison Of Methods For Determining Welding Procedures For The Avoidance Of Hydrogen Cracking During Fabrication, Hart, P.H.M.IX-B-123-86, A Study On Hydrogen Embrittlement Susceptibility (HES) Of Heat Affected Zone Of C-Mn Steel Welded Joints, Zhengfang, W.IX-B-134-86, Solid State Phase Transformations In Steel During Welding, Gooch, T.G. and Hart, P.H.M.IX-B-157-88, What Can Contemporary Weldability Give To The Computer Aided Welding Technology?, Hrivnak, I.IX-B-160-88, Possibility Of Standardization In Weldability Assessment (Draft Form The Welding Research Institute Bratislava), Lombardini, J.IX-B-169-88, Effect Of Preheating And Postweld Heating On Hydrogen Assisted Weld Cracking Of A Low Carbon High Strength Steel At High Restraint In The IRC-Test, Hoffmeister, H. and Akselsen, O.M.IX-B-183-89, List Of Documents SC IX B, April 1989, Anon.IX-B-191-90, Comparison Of Methods For Determining Welding Procedures For The Avoidance Of Hydrogen Cracking During Fabrication: A Note On Progress, Hart, P.H.M., Pargeter, R.J. and Wright, M.D.IX-B-199-90, Annual Report Of SC IX B 1989 - 1990, Dadian, M.

Page 104

IX-B-200-90, Hardness Measurement In Underbead HAZ Of Single - Pass Weld, Mraz, L.IX-B-220-93, Task Group: Repair Welding, Hrivnak, I.IX-B-233-94, Effect Of Microstructure On Cracking Of Low-Alloy C-Mn Welds, Dziubinski, J. and Adamiec, P.IX-B-234-94, Intermediate Meeting Of SC IX B, Dadian, M.IX-B-241-96, Organization Of A Round Robin Exercise On HAZ Microstructure Identification, Dadian, M.IX-B-246-97, Gleeble-Simulation For Round Robin Test On HAZ Microstructure, Cerjak, H., Posch, G. and Letofsky, E.IX-Creep-101-79, Determining The Remaining Life Of Superheated-Steam Tubes Which HaveBeen In Service By Creep Tests And Structural Examinations, Walser, B. and Rosselet, A.IX-Creep-104-79, Increased Information From Microstructural Replicas Through The Application Of Scanning Electron Microscope, Wendler, B. and Neubauer, B.IX-Creep-111-79, Experience With High Chromium Ferritic Steels In Fossil Fired Boilers, Fricker, H. and Walser, B.IX-Creep-112-79, The Mechanical Properties Of The Gas Metal Arc Welded Pure And Low Alloyed Coppers At High Temperature, Hosoda, T., Morikawa, M. and Yoshida, H.IX-Creep-125-81, Cracking And Control Of Cr-Mo-V Steam Pipes Weldings, Crudeli, R.IX-Creep-34-75, Heterogeneity Of High Temperature Creep Of Welded Joints, Zapletalek, A.IX-Creep-36-75, Structural Stability And Creep Resistance Of The Low Alloy AS-Cast Steel Welded Joints, Pilous, V.IX-Creep-37-75, Contribution To The Evaluation Of Residual Life Of Power Station Components, Bina, V. and Pech, R.IX-Creep-38-75, Creep Ductility Of Low-Alloy Weld Metals, Sobotka, J., Prnka, T. and Pech, R.IX-Creep-51-76, Long-Range Plan For Pressure-Vessel Research. Fourth Edition, IX-Creep-53-76, Influence Of Structure And Structure Stability On The Creep Rupture Strength Of Low Alloy Vanadium-Carbide Strengthened Weld Metal, Sobotka, J. and Prnka, D.IX-Creep-54-76, Creep Rupture Properties Of Welded Joints On Centrifugally Casted Tubes Of Cast Steel With 25% Cr And 20% Ni, Steinkusch, W.IX-Creep-55-77, General Principles To Determine Residual Service Life Of Power Equipment, Hrivnak, I. and Jozefini, P.IX-Creep-58-77, Revised Proposal For Circular Letter To The Member Societies Behaviour At The High Temperature And Creep Of Welded Assemblies: Collection Of Creep Data, Rosendahl, C.-H.IX-Creep-59-77, The Effect Of Stationary Long-Term Thermal Loading On The Properties Of Welded Joints In Heterogeneous Materials, Sinal, J.IX-Creep-63-77, The Applicability Of The Varnish Replica Method For Assessing Creep Damage In High-temperature Steel Components, Neubauer, B.IX-Creep-65-77, Austenitic/Ferritic Welded Transition Joints For High Temperature Application, Hardy, A.K., Rowley, T. and Williams, J.A.IX-Creep-66-77, Creep Cavitation In (%) 16Cr-10Ni-6Mn, Mo, Nb, V Steel Weld Deposits, Asbury, F.E., Coleman, M.C. and Willoughby, G.IX-Creep-77-78, Agenda For The Meeting Of Commission IX WG Creep At CRM, Abbaye, Du Val-Benoit, Liege, Belgium, Thursday, February 2nd At 9.30 a.m - 17.00 p.m., Rosendahl, C.-H..IX-Creep-78-78, Annual Assembly Commission IX Copenhagen 1977: Minutes, Anon.

Page 105

IX-Creep-79-78, IIW Commission IX WG Creep: Data Collection, Rosendahl, C.-H.IX-Creep-80-78, Means Of Reliability Increase For Welded Joints In Power equipment, Zemzin, W.N.IX-Creep-82-78, Evaluation Of Carrying Ability Of Cr-Mo-V Steel Steam Lines, Shron, R.S. and Korman, A.J.IX-Creep-83-78, Application Of Fracture Mechanics To The Evaluation Of Creep Damage In 2 1/4Cr-1Mo Steel, Sasabuchi, Y., Date, K., Takahashi, H. and Suzuki, M.IX-Creep-84-78, Shron R.Z. On Resistance To Breaking Of Welded Joints Of Heat-Resistant Steels Under Creep, Proisvodstvo, S.IX-Creep-85-78, Residual Lifetime Estimation Of A High Pressure Steamtube, van Rossum, O.and Dortland, W.IX-Creep-86-78, Investigation Of The Creep Behaviour Of Serviced Welds Of A Main Steam Pipe In 1%Cr-0.5%Mo Steel, Cumino, G. and Pinaldi, F.IX-Creep-87-78, Welded Joints Between Dissimilar Stainless Steels And Between Stainless Low Alloy Steels, Anon.IX-Creep-88-78, The Creep-Rupture Properties Of Fusion Welds In 0.4%C-25%Cr-20%Ni (HK 40) Steel, Lancaster, J.F., Pates, M. and Rae, A.IX-Creep-89-78, Investigations Of Three Alloy Steel Manual Metal-Arc Weld Metals Used In Welding Casting, Boniszewski, T.IX-Creep-90-78, High Temperature Properties Of Welded Joints Of Centrifugally Cast Pipes Form 25/20 CrNi-Steels, Pech, R., Koutnik, M. and Zizka, J.IX-Creep-91-78, Some Of The Reasons For Creep Resistance In Welded Joints, Zapletalek, A.IX-Creep-92-78, IX WG Creep: Minutes From Meeting No 7 (Belgium), Rosendahl, C.-H.IX-Creep-93-78, Working Group On High Temperature Behaviour And Creep Of Welded Joints. Annual Report 1977-78, Rosendahl, C.-H.IX-Creep-94-78, Prediction Of -Residual Lifetime Of Constructions Operating At High Temperature, Anon.IX-Creep-95-78, Properties Of Steel Weldments For Elevated Temperature Pressure Containment Applications, Anon.IX-Creep-96-78, I.Mech.E./A.S.M.E./A.S.T.M./J.S.M.E. International Conference Engineering Aspects Of Creep 15th - 19th September 1980 University Of Sheffield, Tugwell, A.J.IX-Creep-L-14-79, Reference Guide To The Technical Literature Of The Metals And Ceramics Division October 1, 1978, Through December 31, 1978, Jackson, D.E.IX-Creep-L-15-79, Gerbrauchseigenschaften Des Warmfesten Ferritischen Stahlgusses Fur Den Dampfturbinrnbau, Mayer, K.H., Gysel, W., Trautwein, A. and Tremmel, D.IX-Creep-L-16-79, Changes Of Microstructures And Mechanical Properties Of Types 304 and 316 Austenitic Steels After Long Aging, Mimino, T., Kinoshita, K., Shinoda, T. and Minegishi, I.IX-Creep-L-17-79, Changes Of Microstructures And Mechanical Properties Of Type 321 And 347 Austenitic Steels After Long Aging, Sinoda, T., Mimino, T., Kinoshita, K. and Minegishi, I.IX-Creep-L-18-79, Reference Guide To The Technical Literature Of The Metals And Ceramics Division. January 1, 1979, Through March 31, 1979, Anon.IX-Creep-L-19-79, Reference Guide To The Technical Literature Of The Metals And Ceramics Division April 1, 1979, Through June 30, 1979, Anon.IX-Creep-L-23-80, Reference Guide To The Technical Literature Of The Metals And Ceramics Division January 1, 1980, Through March 31, 1980, Anon.IX-Creep-L-27-81, Reference To The Technical Literature Of The Metals And Ceramics

Page 106

Division January 1, 1981 Through March 31, 1981, Anon.IX-F-19-71, Type Tests To Assess The Susceptibility To Lamellar Tearing, Vrbensky, J.IX-G-312-83, Commission IX - Behaviour Of Metals Subjected To Welding Sub. Commission IX - G - Recommendations For Welding Of High Strength Steel. Guide To The Welding And Weldability Of Ni - Alloyed Cryogenic Steels, Hrivnak, I.IX-G-319-86, Guide To The Metallurgy Of Welding And Weldability Of Low-Alloy Heat Resistant Structural Steels. First Draft, Hrivnak, I.IX-G-325-86, Temper Embrittlement In Modern Off-Shore Structural Steels, Dhooge, A., Ostyn, K., Magula, V. and Vinckier, A.IX-H-414-98, Predicted And Measured FN In Specifications, Kotecki, D.J.IX-H-415-98, Investigation To Compare Hot Cracking Tests -Externally Loaded Specimen-Intermediate Report May, 1998. Final Report, June, 1998, Wilken, K.IX-H-416-98, Application Of SICO Procedure To Evaluation Of Microfissuring Susceptibility Of Weld Metal To Alloy Types 800 and 625, Chen, W.IX-H-417-98, Third Draft May-98. Review. Intermetallic Phase Precipitation In Duplex Stainless Steels And Weld Metals, Karlsson, L.IX-H-418-98, Modelling Of One Sided Welding To Describe Hot Cracking At The End Of Longer Butt Weld Seams, Herold, H., Streitenberger, M. and Pchennikov, A.IX-H-420-98, Weldability Of Nitrogen -/Molybdenum-Alloyed Fully Austenitic Stainless Steels, Anon.IX-H-421-98, Behaviour Of Nitrogen In High Strength Stainless Steel JJ1 Weld Metal, Kokawa,H., Sato, Y.S., Kuwana, T. and Shindo, Y.IX-H-422-98, Welding Ferritic And Martensitic 13% Cr Steels Preliminary Report (Draft 2), Marshall, A.W. and Farrar, J.C.M.IX-H-423-98, Super Martensitic Stainless Steels- Overview And Weldability, Farrar, J.C.M. andMarshall, A.W.IX-H-424-98, Formation Of Helium Bubble In YAG Laser Weldment Of Helium-Doped Stainless Steel, Kuroda, T. and Ikeuchi, K.IX-H-425-98, Unusual Stabilization Behavior In Type 347H SS Tubulars For A Refinery Heater, Bolinger, S.E., Kolp, L.E. and Fort, W.C.IX-H-426-98, Effects Of Sensitization And Stress Service Fluid Chemistry On Polythionic Acid Stress Corrosion Cracking Of 18-8 Stainless Steels, Nagashima, E., Matsumoto, K. and Shibata, K.IX-H-427-98, Reproducability Of Ferrite (FN) Measurements Carried Out Using Weldments, Anon.IX-H-428-98, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List As At 20th April 1998, Anon.IX-H-429-98, List Of IX-H Documents, 379-97 To 430/98, Anon.IX-H-430-98, Sub-Commission IX-H Agenda. 42nd Meeting Of SC IX-H On Friday, May 29th 1998, At 9.00 a.m. At Esab AB In Goteborg, Sweden, Anon.IX-H-431-98, An Application Of Strain Induced Crack Opening (SICO) Test For Evaluation Of Weld Metal Susceptibility To Microfissuring, Mandziej, S.T. and Chen, W.C.IX-H-432-98, Prediction Of FN No From Chemical Analysis, Astrom, H.IX-H-433-98, Report On Activities Of The Working Group - Creep-Meeting At Institut De Soudure 14-15 May1998, Dhooge, A.IX-H-434-98, Comparison Between Ferrite Prediction Models, Anon.IX-H-435-98, Technical Note On The Specification Of Metallographic Properties Of

Page 107

Weldments In Duplex And Superduplex Stainless Steel, van Nassau, L. and Meelker, H.IX-H-436-98, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List - As At 11th June 1998, Anon.IX-H-437-98, SC IX-H Minutes Of The 42nd Meeting Of SC IX-H Held At ESAB AB, Goteborg, Sweden, On May 29, 1998, Farrar, J.C.M.IX-H-438-98, Annual Report Of SC IX-H: 1997/98, Farrar, J.C.M.IX-H-439-98, List Of IX-H Documents, 395-97 To 438/98, Anon.IX-H-440-99, Comments And Additional Results To IIW-Doc: IX-1023-98 Investigation To Compare Hot Cracking Tests -Externally Loaded Specimen-, Wilken, K.IX-H-441-99, Acceptance Criteria For Bend And Self Restrained Hot Cracking Tests, Anon.IX-H-442-99, Effect Of Sulfur And Thermal Cycles On Reheat Cracking Susceptibility In Multi-Pass Weld Metal Of Fe-36%Ni Alloy, Nishimoto, K., Mori, H., Esaki, K., Hongoh, S. and Shirai, M.IX-H-443-99, Structure And Properties Of Fusion Welded Joints In In738 LS and Rene 80 Alloys, Czech, N., Savchenko, V., Staif, F. and Yushenko, K.IX-H-444-99, Effect Of Intermetallic Content On Pitting Resistance Of Ferritic-Austenitic Stainless Steels, Ginn, B.J. and Gooch, T.G.IX-H-445-99, Precipitation Behavior Of Sigma Phase In Duplex Stainless Steels And Weld Metals, Kuroda, T., Ikeuchi, K., Oe, K. and Nakade, K.IX-H-446-99, Effect On Local Heat Treatment On The Properties On Welded Joints In Sodium Pipelines Of Nuclear Power Stations, Korolkov, P.M.IX-H-447-99, Investigation Of Boundaries And Structures In Dissimilar Metal Welds, IX-H-448-99, Crevice Corrosion Properties Of Weld Overlays Of Ni-Based Alloys Compared To 6Mo Stainless Steels For Seawater Applications, Rogne, T., Drugli, J.M., Solem, T., Salbu, H. and Skjellevik, H.IX-H-449-99, Microstructural Development On Welding Low Carbon 13%Cr Martensitic Steel, Gooch, T.G., Woollin, P. and Haynes, A.G.IX-H-450-99, Properties Of Laser Welded Supermartensitic Stainless Steels, Dhooge, A. and Deleu, E.IX-H-451-99, Agenda. 43rd Meeting Of SC IX-H On Monday, 19th April, 1999 In The Mayfair Wyndham Hotel In St. Louis, MS, USA, Starting At 9.00 a.m., Farrar, C.IX-H-452-99, Welding Of Ferritic And Martensitic 13%Cr Steels Part 1 (Draft 3), Marshall, A.W.and Farrar, J.C.M.IX-H-453-99, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List - As At 16th March 1999, Anon.IX-H-454-99, Weldability Of Nitrogen-Molybdenum Alloyed Full Austenitic Stainless Steels, Anon.IX-H-455-99, List Of IX-H Documents, 422/98 - 457/99, Anon.IX-H-458-99, Minutes Of The 43rd Meeting Of SC IX-H Held At The Mayfair Wyndham Hotel, St. Louis, USA On April 19. 1999, Farrar, J.C.M.IX-H-459-99, Comparison Of Weld Hot Cracking Tests Summary Of An IIW Round Robin Study, Finton, T.L., Lippold, J.C. and Bowers, R.J.IX-H-460-99, Environmental Cracking Of Dissimilar Steel Welded Joints, Gooch, T.G.IX-H-461-99, Welding Of High Nitrogen-Super Austenitic Stainless Steels, Holmberg, B.IX-H-462-99, Position Statement On The Effect Of Bismuth On The Elevated Temperature Properties Of Flux Cored Stainless Steel Weldments, Farrar, J.C.M. and Marshall, A.W.IX-H-464-99, Welding Of A Ferritic And Martensitic 13%Cr Steels (Draft 4), Marshall, A.W. and

Page 108

Farrar, J.C.M.IX-H-465-99, Agenda. 44th Meeting Of SC IX-H On Friday, 12th November, 1999 In The Netherlands Congress Centre In The Hague, The Netherlands Starting At 9.00 a.m., Farrar, C.IX-H-466-99, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List - As At 15th October 1999, Anon.IX-H-467-99, List Of IX-H Documents, 429/98 - 467/99, Anon.IX-H-468-99, Report On Activities Of The Working Group Creep Meeting At Technical University Of Budapest 6-7 May 1999, Dhooge, A.IX-H-470-99, Minutes Of The 44th Meeting Of SC IX-H Held At The Netherlands Congress Centre, The Hague, On November 12th, 1999, Farrar, J.C.M.IX-H-471-00, Agenda. 45th Meeting Of SC IX-H On Friday, 31st March, 2000 At The Welding Institute (TWI Ltd), Granta Park, Abington, Cambridge, UK Starting At 9 a.m., Farrar, C.IX-H-472-00, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List - As At 1st March, 2000, Anon.IX-H-473-00, Modelling Mushy Zones In Welds Of Multicomponent Alloys: Implications For Solidification Cracking, DuPont, J.N., Robino, C.V. and Marder, A.R.IX-H-474-00, Modelling Of The PVR-Test To Examine The Origin Of Different Hot Cracking Types, Herold, H., Streitenberger, M. and Pchennikov, A.IX-H-475-00, New Strip Cladding Concept For Hydrogen Atmosphere, Karlsson, L., Pak, S., Rigdal, S. and Gustavsson, A.-C.IX-H-476-00, A Correlation Of Martensite Layer Widths And MS Temperature Equations For Austenitic/Ferritic Dissimilar Alloy Welds, Kusko, C.S., DuPont, J.N. and Marder, A.R.IX-H-477-00, Welding Of Highly Alloyed Nitrogen Containing Austenitic Stainless Steels, Holmberg, B.IX-H-478-00, IIW Round Robin: Bismuth In Stainless Steel FCW Weld (Progress Report), Farrar, J.C.M. and Zhang, Z.IX-H-479-00, Guidelines For Corrosion Testing Of Weldments In Stainless Steels And Nickel Base, Pettersson, C.-O.IX-H-480-00, Welding Of Ferritic And Martensitic 13%Cr Steels (Draft Four Amendments), Marshall, A.W. and Farrar, J.C.M.IX-H-481-00, List Of IX-H Documents, 439/98 - 481/2000, Anon.IX-H-482-00, Effect Of Residual And Micro-Alloyed Elements On Welding Of Stainless Steel. Part 2: Effects On Mechanical Properties By Arc Welding, Miyake, T., Nagasaki, H., Mizumoto,M., Watanabe, D. and Yurioka, N.IX-H-483-00, Effect Of Cerium Addition Of Hot Cracking Susceptibility In HAZ Of Cast Alloy 718, Nishimoto, K. and Woo, I.IX-H-485-00, Prevention Of Hot Cracking In Multi-Pass Weld Metal Of Fe-36%Ni Invar Alloy, Nishimoto, K., Hongou, S., Kubo, N., Koga, S., Nagatani, H., Ogawa, K. and Hirata, H.IX-H-486-00, Hot Cracking Theory By Prokhorov, And Modelling Of The PVR-Test, Herold, H.,Streitenberger, M. and Pchennikov, AIX-H-487-00, Investigation To Compare Hot Cracking Tests-Externally Loaded Specimen- Final Report, May 1999. Revised March 2000., Wilken, K.IX-H-488-00, Trends And Needs In Welding Dissimilar Materials, Nelson, T.W.IX-H-489-00, The Influence Of A Duplex Filler Material On The Weldability Of A New High Nitrogen Stainless Steel, Harzenmoser, M.IX-H-490-00, Revised Agenda. 45th Meeting Of SC IX-H On Friday, 31st March, 2000 At The Welding Institute (TWI Ltd), Granta Park, Abington, Cambridge, UK Starting At 9.00 a.m.,

Page 109

Farrar, C.IX-H-491-00, List Of IX-H Documents, 439/98 -491/2000, Anon.IX-H-492-00, Comments Of Technical Committee Of Welding Filler Metal Division JWES On IIW Doc.IXH-462-99 Position Statement On The Effect Of Bismuth On The Elevated Temperature Properties Of Flux Cored Stainless Steel Weldments, Anon.IX-H-493-00, Fracture Toughness Properties Of Two Grades Of X-80 Supermartensitic Welded Pipes, Deleu, E. and Dhooge, A.IX-H-494-00, Minutes Of The 45th Meeting Of Sub-Commission IX-H Held At The Welding Institute, Cambridge, UK, On March 31st, 2000, Farrar, J.C.M.IX-H-497-00, Agenda. 46th Meeting Of SC IX-H On Friday, 10th Of November, 2000 At The Avesta Sheffield Research And Development Department, Avesta, Sweden, Farrar, C.IX-H-498-00, SC IX-H Welding Of Stainless And Ni-Base Alloys Members List - As At 14th October 2000, Anon.IX-H-499-00, Destructive Tests On Welds In Metallic Materials - Hot Cracking Tests For Weldments - Part 1: General (ISO/DIS 17641-1:2000), Part 2: Self-Restraint Tests (ISO/DIS 17641-2:200), Part 3: Externally Loaded Tests (ISO/DIS 17641-3:2000), Anon.IX-H-500-00, Effect Of Microfissures On Corrosion Performance Of Austenitic Stainless Steel Weld Metals, Lundin, C.D., Cui, Y., Zhou, G., Liu, P. and Wen, S.IX-H-501-00, Effects Of Elemental Distribution On Precipitation Behaviour And Properties Of Duplex Stainless Steel Weldments, Karlsson, L.IX-H-502-00, Welding Of Nitrogen Alloyed Austenitic Stainless Steels, Holmberg, B.IX-H-503-00, Ferrite In Lean Austenitic Type 16.8.2 Stainless Steel Weld Metal, Marshall, A.W.IX-H-504-00, Corrosion Testing Of Supermartensitic Weldments With Matching Consumables,Olsen, S.IX-H-505-00, List Of IX-H Documents, 439/98-491/2000, Anon.IX-H-511-01, Welding Of Nitrogen Alloyed Austenitic Stainless Steels, Holmberg, B.IX-H-514-01, Degassing Response Of Supermartensitic Weld Metals, Karlsson, L., Rigdal, S., Dhooge, A., Deleu, E., Goldschmitz, M. and van der Broek, J.IX-H-515-01, Girth Welding Of Supermartensitic Stainless Steels With Matching Filler Metals, Heuser, H., Jochum, C., Perteneder, E. and Tosch, J.IX-H-516-01, Microstructural Development And Weldability Of Fusion Welds In Alloy Al-6XN Prepared With IN622 And IN625 Filler Metals, DuPont, J.N. and Banovic, S.W.IX-H-517-01, This Standard Specifies The Required Specimens, The Test Piece Dimensions And The Procedures To Be Followed To Carry Out-Self-Restraint Hot Cracking Tests, Anon.IX-J-113-86, Quantitative Description Of Weld Metal Macrostructure, Gretoft, B. and Svensson, L.-E.IX-J-115-87, Influence Of Copper Content On Weld Metal Properties, Anon.IX-J-116-86, Minutes Of Sub-Commission IXJ Meeting, Dolby, R.E.IX-J-118-87, Intermediate Meeting Of SCIXJ On Monday March 30 1987 In The Langham Room Of The Bloomsbury Crest Hotel, Coram Street, London WC1N 1HT Commencing 1030 Hours. AGENDA., Anon.IX-J-120-87, Membership Of Sub-Commission IXJ (As At 1 August 1987), Anon.IX-J-121-87, List Of Documents Issued Since 1 April 1986, Anon.IX-J-122-87, Small Particles In Weld Metals - A Review, Abson, D.J.IX-J-123-87, Guide To Examination Of Ferritic Steels Weld Metals, Duncan, A.IX-J-124-87, Minutes Of Sub-Commission IXJ Meeting Held On Monday 30th March 1987 At

Page 110

The Bloomsbury Crest Hotel, London, Anon.IX-J-164-90, Microstructure And Post-Weld Heat Treatment Mechanical Properties Of C-Mn-NiSteel MIG/MAG Weld Metal, Abson, D.J.IX-J-165-90, Transformation Kinetics Of Submerged Arc Weld Metal Preliminary Investigations, Thewlis, G.IX-J-167-90, Annual Report - Sub-Commission IXJ. Metallurgical Studies Of Fused Metal, Anon.IX-J-172-91, Annual Report - Sub-Commission IXJ. Metallurgical Studies Of Fused Metal, Anon.IX-J-184-93, Quantitative Evaluation Of Solidification Brittleness Of Weld Metal By MISO Technique (Measurement By Means Of In - Situ Observation), Matsuda, F. and Tomita, S.IX-J-185-93, Application Of Very Low Yield Strength Electrodes In The Root Pass Of Weldments To Prevent Preheating, Vuik, J., van Wortel, J.C. and Sevenhoven, C.IX-J-187-93, List Of SCIXJ Documents Issued Since 1 April 1992, Anon.IX-NF-38-86, Annual Report 1985/ 86 Of The WGNF Of Comm. IX, Hoffmeister, H.JWG-XIII-XV-111-93, Joint Working Group XIII-XV, Minutes Of The Meeting In Madrid, Spain, Hobbacher, A.JWG-XIII-XV-112-93, IIW Recommendations On Fatigue Of Welded Components, Hobbacher, A.JWG-XIII-XV-115-93, IIW Joint Working Group XIII-XV, Minutes Of The Meeting In Paris, France, Hobbacher, A.JWG-XIII-XV-116-93, IIW Joint Working Group XIII-XV, Terms Of Reference For IIW Joint Working Group XIII-XV, Hobbacher, A.JWG-XIII-XV-168-01, Minutes of the Meeting in Ljubljana, Slovenia; 8 July 2002, Hobbacher, Prof. Dr. A.JWG-XIII-XV-44-80, Design Recommendation For Cyclic Loaded Welded Steel Structures, Hobbacher, A.JWG-XIII-XV-65-83, Comments To The High Cycle Fatigue Criterion Based On The Limit States Design Method, Krupka, K., Marek, P., Vlk, M. and Hepnarek, I.SCUW-124-90, Standard Guidelines For Specifications For Underwater Fusion Welding, Hoffmeister, H.SCUW-143-93, Specification For Underwater Welding, Anon.SCUW-185-00, Development Of Underwater Nd: YAG Laser Welding Technology, Morita, I., Tsuchiya, K., Owaki, K., Kojima, T. and Sakai, K.SCUW-186-00, Development And Application Of Laser Peening System To Prevent Stress Corrosion Cracking Of Welded Components, Sano, Y., Kimura, M., Sudo, A., Hamamoto, Y. and Shima, S.SCUW-187-00, The Effects Of Pressure On Electrical Performance And Weld Bead GeometryIn High Pressure GMA Welding, Hart, P., Richardson, I.M. and Nixon, J.H.SCUW-190-00, Underwater Engineering Experience/Costings, Cooper, M.SCUW-191-00, Select Committee On Underwater Welding. Minutes Of The Meeting Held At The IIW Annual Assembly, Florence, Italy, 2000, Anon.SCUW-92-87, Hydrogen Determination Of Test Welds Made In Unmanned Hyperbaric Welding Simulators, Hoffmeister, H.SCUW-99-87, Hydrogen Determination Of Test Welds Made In Manned Hyperbaric Simulators Or In Manned Subsea Hyperbaric Habitats, Hoffmeister, H.V-1001-92, Ultrasonic Imaging For Weld Inspection, Anon.

Page 111

V-1002-92, Commission V Annual Statement 1991/92, Forli, O.V-1003-93, Commission V Provisional Agenda Annual Assembly Glasgow 1993, Forli, O.V-1006-93, Annual Report Sub-Commission VE 1993, Dobmann, G.V-1008-93, Commission V Working Group 2 Annual Report 1992/93, Forli, O. and Raine, G.A.V-1009-93, Working Group 3 Of IIW Commission V Annual Report 1992/93, Work Program, Membership List, Meyer, H.-J.V-1014-93, Residual Stress Analysis In Weldments - Theoretical Approach, Murugan, D., Kumar, P.V., Raj, B. and Bose, M.S.C.V-1015-93, In-Situ Metallographic Examination Of High Temperature Welded Pressure Parts, Venkataraman, G., Ramesh, T.R. and Veeraraghavan, R.V-1016-93, Feedback From Weld Related Failures In Austenitic Stainless Steel Bellows Towards Indigenous Design And Fabrication, Kasiviswanathan, K.V. and Raj, B.V-1017-93, ISO/TC 176 Quality Management And Quality Assurance; Situation 1993: First (Minor) Revision Of ISO 9000/9004, ISO 9000 Family, Anon.V-1018-93, ISO/CEN State Of The Art 1992/93 Related To Welding Technology In Quality Management, Inspection And Personal Qualification, Anon.V-1019-93, NDT Acceptance Levels And Their Relation To Weld Quality Levels Defined IN ISO 5817/EN 25 817 (Resolution 3 Of Commission V Madrid Sept 1992), Larsen, B.V-1026-93, IIW Commission V Annual Statement 1992-93, Forli, O.V-1035-94, Characterization Of Black Light Equipment: Critical Factors And Supporting Data, Calcagno, G., Costa, G., Marmigi, R. and Pollicardo, E.V-1041-94, Commission V Minutes Of The Meeting, Siewert, T.A.V-1042-94, The Use Of Fitness For Purpose (FFP) Of Welded Structures In Sweden, Dahlberg, L.V-1043-94, Commission V Minutes Of The Meeting, Siewert, T.A.V-1044-94, Welding Technology Margin And Its Application In Welding Quality Assurance, Zhihua, L., Keqin, L. and Haojun, J.V-1045-94, Commission V Minutes Of The Meeting, Siewert, T.A.V-1046-95, IIW Commission V Annual Report 1994/95, Siewert, T.A.V-1047-95, Report About The Intermediate Meeting Of Sub-Commission VA On Friday, January 13, 1995 At 13.00 H At The Ramada Beach Hotel In Fort Lauderdale, Florida, USA, Heidt, H.V-1048-95, Annual Report 1994 And 1995 Sub-Commission VB, Kunzmann, P.V-1050-95, Annual Report 1995 Sub-Commission VE, Dobmann, G.V-1051-95, Commission V Working Group 2 Annual Report 1994/95, Anon.V-1052-95, Final Report Of International Workshop On NDE Standards, Siewert, T.A.V-1053-95, Commission V Provisional Agenda - Annual Assembly, Stockholm, 1995, Anon.V-1054-95, Commission V Documents - 1994-95, Anon.V-1055-95, Minutes Of The Meeting, 14 June 1995, Siewert, T.A.V-1056-95, Guidance For The Use Of The Catalogue Of Acceptance Criteria ISO 5817 (Collection Of Radiographs). Reference Cards With Interpretation Of Steel Butt Weld Radiographs, International Edition, Anon.V-1057-95, Minutes Of The Meeting, 15 June 1995, Siewert, T.A.V-1058-95, Minutes Of The Meeting, 16 June 1995, Siewert, T.A.V-1059-96, Quality Control And Quality Assurance Of Welded Products, Annual Report 1995/96, Siewert, T.A.V-1060-96, Commission V Final Agenda - Annual Assembly, Budapest, 1996, Anon.

Page 112

V-1061-96, Commission V Documents - 1995/96, Anon.V-1062-96, Guidelines For Replacing NDE Techniques With One Another, Forli, O.V-1063-96, Subcommission VA Of IIW Commission V Annual Report 1995/96, Heidt, H.V-1064-96, IIW Sub-Commission V B Annual Report 1995/96, Kunzman, M.V-1065-96, Annual Report 1995/96, Wustenberg, H.V-1066-96, Annual Report 1996 Subcommission VE, Dobmann, G.V-1067-96, Lifetime Extension- The Contribution Of A Low And Multifrequency Eddy Current Technique To Assure The Integrity Of The Cladding In Nuclear Power Plant Pressure Vessels,Dobmann, G., Becker, R., Disque, M., Rodner, Ch. and Both, N.V-1068-76, Online Closed Loop Control Of The Spot Welding - An Example Of PINT (Process Integrated Nondestructive Testing), Waschkies, E.V-1069-96, Predicting The Performance Of Eddy Current Probes, Moulder, J.C. and Nakagawa, N.V-1070-96, Commission V Working Group 2 Annual Report 1995/96, Raine, A.V-1071-96, NDT Offshore: A Review, Forli, O. and Raine, G.A.V-1072-96, ROV Weld Inspection - The Next Stage, Raine, A.V-1073-96, ROV Inspection Of Welds - A Reality, Raine, G.A. and Lugg, M.C.V-1074-96, Weld Quality Degradation At Starts And Stops, Lukacevic, Z. and Samardzic, I.V-1097-97, Information On Practices For Underwater Non Destructive Examination. February 1998, V-1181-01, Documents Of Commission V In The Period 200/2001, Anon.V-1182-01, Minutes Of The Intermediate Meeting In Paris, Sub-Commission VA, Jan. 16.01.01., Ewert, U.V-1183-01, Minutes Of The Intermediate Meeting, Sub-Commission VC, Paris 17.01.01, Wustenberg, H.V-1184-01, Minutes Of The Intermediate Meeting, Sub-Commission VE, Paris 18.01.01, Dobmann, G.V-1187-01, Annual Report Of Commission V For The Time Period 2000/2001, Dobmann, G.V-1188-01, Annual Report Of Sub-Commission VA, Radiography-Based Weld Inspection Topics 2000/2001, Ewert, U.V-1189-01, Annual Report Sub-Commission VC - Ultrasonically Based Weld Inspection Topics, Wustenberg, H.V-1190-01, Annual Report Of The Sub-Commission VE, Weld Inspection Based On Magnetic, Thermal And Optical Methods, Dobmann, G.V-1191-01, List Of Documents Of Sub-Commission VC, Dobmann, G.V-1194-01, On-Line Monitoring Of Fatigue In The LCF And HCF Range By Using Micro-Magnetic NDT At Plain Carbon And Austenitic Stainless Steel, Dobmann, G.V-1195-01, Agenda Of The Commission V, NDT And Quality Assurance, Tehnical Meetings InLjubliana July 09-11,2001, Dobmann, G.V-1198-01, New Detectors And Perspectives In Industrial Radiology, Ewert, U., Zscherpel, U. and Berlin, B.A.M.V-1199-01, Status And European And International Standardization Of Radiological Methods For NDT, Heidt, H., Ewert, U. and Hadrich, J.V-1200-01, Evaluation Of Pipelines Stress And Strain State By Non-Destructive Test Methods,Steklov, O.I.V-1201-01, Electro-Optical Sensors Integrated In Arc Welding Workstation For Process Monitoring By Means Of Fuzzy Logic Controller, de Blasiis, D., Sforza, P., Lombardo, V.,

Page 113

Naso, D., Pantaleo, P., Turchiano, B. and Pezzati, L.V-182-65, Recommended Practice For The Application Of Penetrant Testing, Anon.V-307-66, An Attempt For Mathematical Approach To The Effect Of Weld Imperfections On The Strength Of Welded Structures, Angres, J.V-308-66, Differences Of Aspect And Complexity Of The Inspection Of Heavy Gauge Constructions, Hennion, J., Maréchal, E. and Rappenne, H.V-309-66, Results Of Laboratory Experiments Concerning The Application Of Non-Destructive Inspection Procedure To Heavy-Gauge Steel Parts, Bastien, P., Dubresson, J., Evrard, M., Forest, G. and Rath, R.V-310-66, The Radiography Of Thick Butt-Welds In Steel, Halmshaw, R.V-311-66, Some Principles And Procedures Specially Important In The Ultrasonic Testing Of Thick Sections, Sproule, D.O.V-312-66, Investigating The Soundness Of 4 in. Thick Welded Joints Between Steel Plates Ranging From 74000 To 88000 PSI Uts., Guyot, F.V-313-66, Destructive Tests On Thick Plates, Soete, W., Dechaene, R. and Sys, W.V-314-66, Control Of Welds In Heavy Steel Sections By Means Of Radiography Using Betatrons And Linacs Of More Than 12 MeV Energy, Bentz, W., Fink, K., Krachter, H. and Moller, H.V-315-66, Experience In Ultrasonic Testing Of Welds In Heavy Steel Structure, Trumpfheller, R., Meyer, H.-J.V-316-66, Weld Defect Detectability And The Influence Of Defects On Failure Of Heavy Steel Sections, Wylie, R.D., Pickett, A.G., Lautzenheiser, C.E. and Whiting, A.R.V-317-66, Nickel-Cobalt Steel Weldment - Destructive And Nondestructive Tests, Black, W.A.V-318-66, Ultrasonic Examination Of Welded Joints In Steel Plate Of Thickness Up To 300 mm., de Sterke, A.V-320-66, Ultrasonic Inspection Of Electroslag Welds, Ermolov, I.N.V-321-66, Quality Rating Of Ultrasonically Examined Welded Joints, Yermolov, I.N. and Raichman, A.S.V-328-66, The Activities Of The International Institute Of Welding In The Domain Of Nondestructive Testing, Anon.V-409-69, The Present Aspect Of Calibration Blocks, Flaw Detectors, And Probes For WeldingInspection In Japan, Anon.V-410-69, Quality Evaluation Of Steel Welds By Ultrasonics, Anon.V-411-69, Conformity Of Internal Weld Defects Between Non-Destructive Testing And Visual Inspection, Ishii, Y. and Fuji, T.V-412-69, A Selection Of Destructive Test Methods For Welds, Anon.V-420-69, Parameters Characterizing Defects In Welds Made By The Metallic Fusion Process,Anon.V-421-69, Low And Intermediate Cycle Fatigue Strength Of Butt Welds Containing Weld Defects (Interim Report), Ishii, Y. and Iida, K.V-433-70, A Selection Of Destructive Test Methods For Ferrous Welds, Anon.V-438-70, Weld Defect Acceptance Levels In Some Current Specifications, Anon.V-485-72, Critical Dimensions Of Defects And Implications For Non-Destructive Testing, Anon.V-491-72, Recommended Practice For The Radiographic Examination Of Fusion-Welded Butt-Joints In Steel Plates, From 0.5-50 mm Thick, Anon.V-492-72, Classification Of X-Ray Films, Schnitger, D. and Mundry, E.V-493-72, New Collection Of Reference Radiographs Of Welds In Steel. Situation Per April

Page 114

1972, Anon.V-498-72, Determination Of Angle Probe Characteristics, Anon.V-518-73, Synthèse Des Techniques De Détermination Des Points D'Émergence Et Des Angles De Réfraction Des Palpeurs Obliques, Anon.V-520-73, The Use Of Artificial Reflectors For The Sensitivity Setting Of Ultrasonic Equipment For Non-Destructive Testing Of Welds, Anon.V-530-74, A Simplified Method Of Statistical Analysis Of IQI Values, Anon.V-533-74, The Magnetographic Inspection Of Welds, Anon.V-535-74, Classement Suivant Leur Efficacite Des Produits Utilises Pour L'Essai De Ressuage, Anon.V-536-74, Note On The Preparation Of Replicas For The Micrographic Examination Of Welded Zones, Anon.V-537-74, Essais De Ressuage Haute Temperature, Anon.V-546-74, P-Scan Documentation, A New Method For Recording And Visualizing Data From Ultrasonic Weld Inspection, Lund, S.A. and Jensen, P.V-550-75, Rapport D'Activite Pour La Periode 1974-1975, Anon.V-551-75, Nondestructive Evaluation Of 9% Ni Steel Welds, Isono, E. and Udagawa, T.V-568-75, Some Comments On The Recommended Method Of Ultrasonic Manual Testing And Classification Of Test Results For Steel Welds, Ano.V-575-76, Questionnaire Relating To Personnel Applying Penetrant Testing, Anon.V-576-76, Questionnaire Relating To Personnel Applying Magnetic Particle Testing, Anon.V-577-76, Complementary Questionnaire Relating To Visual Inspection Common To Personnel Applying Penetrant And Magnetic Particle Testing, Anon.V-587-76, Evaluation Of Internal Stresses By Ultrasonic Methods, Michalski, F.V-592-77, Questionnaires Relating To Personnel Of Level 3. Preliminary Questionnaire On Duration Of Training, Anon.V-594-77, Possibilités Et Limitations Du Contrôle Non Destructif Des Aciers Par Les Ultrasons,Bastien, P.V-595-76, List Of Terms And Explanations Relating To Liquid Penetrant Inspection, Anon.V-596-77, Non Destructive Means For Eliminating Lamellar Tearing, Evrard, M., Le Penven, Y.and Dubresson, J.V-597-77, La Commission XI A Demandé À La Commission V De Répondre À 3 Questions Concernant Le Document XI-304-74 (Joint En Annexe) (Leur Reponses), Anon.V-601-77, Commentaires Des Reponses Recues Aux Questionnaires Concernant Les Operateurs En Radiographie Et Par Ultrasons Propositions Du Groupe De Travail, Anon.V-602-77, New Collection Of Reference Radiographs Of Weld In Steel, Anon.V-604-77, International Institute Of Welding Commission V, Sub-Commission A FluorometallicRadiographic Intensifying Screens, Anon.V-607-77, Report On Destructive Test Methods To Determine The Through Thickness Properties Of Steel Plates For Welded Constructions, McCauley, R.B.V-616-78, Recommendations Relating To The Training Of N.D.T. Personnel, Anon.V-621-78, The Measurement Of Inherent Unsharpness, Anon.V-624-78, Recommended Practice For Underwater Inspection, Hatlo, J.V-626-78, Ultrasonic Testing Of Welded Joints In Hard Polyethylene, Herrmann, H.V-627-78, Ultrasonic Testing Of Heated Tool Welded Butt Joints In Hard Polyethylene, Hoechst, F.V-628-78, Nondestructive Testing Of Joints In Plastic, de Sterke, A.

Page 115

V-629-78, Determination Of A Correction Factor For The Sensitivity Calibration Of Angle Probes With The IIW Blocks N(1 and N(2, Anon.V-631-78, Determination Of Defect Size In Welded Joints By Eddy Current Method, Belokur, I.P. and Teterko, A.Ya.V-633-78, Standard Method For Classification Of Industrial Radiographic Film, Anon.V-642-78, Eddy Current Testing Of Welded Joints, Fastritsky, V.S., Fishkin, P.S., Derun, E.N. and Vingris, L.T.V-655-79, Defect Size Measurement By Radiography, Halmshaw, R.V-658-79, The Probabilistic Forecasting Of The Real Defects Detectability Based On The Results Of The Standard Defects Detection In The Welded Joints Radiographic Control, Adamenko, A.A., Valevich, M.I., Demidko, V.G. and Troitskii, V.A.V-662-79, Resultats De L'Enquete Concernant Les Operateurs En Controle Par Ressuage Et En Controle Par Magnetoscopie, Anon.V-663-79, The Measurement Of Acoustic Emission At The Electron Beam Welding, Ramor, A.V-664-79, Example For The Direct Evaluation Of Ultrasonic Indications Using The Reflectivity Diagram Method (Go -No Go Criteria), Anon.V-665-79, Proposed Revision Of Draft Document WG V-C-44-78/OE: Possibilities And Limitations For The Quantitative Evaluation Of Ultrasonic Indications, Anon.V-674-80, Acoustic Emission: Failure Diagnosis, Caussin, P.V-675-80, Radiography Of Small Bore-Pipe Welds With Low Energy Gamma-Ray Sources, Anon.V-685-80, Investigations Of Weld-Imperfections In Butt-Welds Of Structural Hollow Sections (SHS), Mang, F., Steidel, G. and Bucat, O.V-686-80, Quality Control By Ultrasonic Fault Detection In Friction Welds Of Mild Steel, Drews,P. and Schmidt, J.V-687-80, Detection And Analysis Of Near Surface-Cracks By Ultrasound, Wustenberg, H., Erhard, A. and Kutzner, J.V-691-81, On The Measurement Of Defect Height By Nondestructive Testing, Ishii, I., Kanno, A. and Ogura, Y.V-695-81, Utilisation De L'Ytterbium 169 En Radiographie, Anon.V-699-81, Special Report On The Round Robin Eddy-Current Tests, Anon.V-704-81, Considerations Of The Working Group About The Ultrasonic Testing Of Austenitic Weld Joints, Anon.V-705-81, Improved Techniques For The Ultrasonic Inspection Of Welds, Wuestenberg, H., Erhard, A., Mundry, E. and Schulz, E.V-713-82, Standards For Acoustic Emission Source Identification, Hart, S.D.V-714-82, Recommendations Concerning The Defect Sizing With Ultrasound On Welds, Anon.V-715-82, Guidance On Setting The Sensitivity Of An Ultrasonic Inspection, And On Means For Measuring Echo Amplitudes, Anon.V-717-82, Part 1. NORDTEST Procedure For Ultrasonic Examination Of Welds In Ferritic Steel Materials. Part 2. Acceptance Criteria For Ultrasonic Examination Of Butt-Welds In Ferritic Steel Materials, Hansen, B.V-718-82, Part 1: Quality Classes For Arc Welded Joints In Steel Materials. Part II. Acceptance Criteria For Radiographic Examination Of Butt Welds In Steel Materials, Hansen, B.V-719-82, Form Of The Surface Defect In A Welded Steel Tube Calculated From The Induced

Page 116

Voltage Signal, Brudar, D.V-720-82, Rapport Annuel De La Sous-Commission VA - Radiographie. Periode Septembre 1981 - Septembre 1982, Charlier, J.V-721-82, Etude De La Formation Des Images Parasites Dans La Radiographie Des Aciers Austenitiques, Charlier, J.V-722-82, Annual Report 1981/82, Work Programme, Membership List, Meyer, H.J.V-723-82, Theory Of Acoustic Cross Talk In Ultrasonic Phased Arrays, Falkevich, S.A.V-724-82, Proposal For A New Collection Of Reference Radiographs Of Welds In Steel, Webborn, T.J.H.V-731-82, Relation Between Acoustic Emission And Hardness Of Martensite Steel CrNi-13/4 Specimens At Different Preheating Temperatures, Polajnar, I. and Prosenc, V.V-737-85, NORDTEST Scheme For Examination And Certification Of Non-Destructive TestingPersonnel, Anon.V-739-83, Handbook On The Magnet Leakage Flux Examination Of Welds, Anon.V-740-83, The Application Of Eddy-Currents In Weld Testing, Holler, P., Sharpe, R.S. and Becker, R.V-747-83, Influence Des Tensions Mechaniques Residuelles Et De La Monochromaticite Du Raynnement Sur Les Images Parasites En Radiographie Des Aciers Austenitique Et Des Alliages D'Aluminium, Charlier, J.V-751-83, Geometrical Defects In Arc Welded Joints In Steel materials Classes Of Requirements, Anon.V-759-84, Guideline For Quality Assurance Activities With Consideration Given To Special Processes, Anon.V-760-84, Guideline For Selecting Quality Assurance Levels In Welding Technology, Anon.V-764-84, Handbook On The Ultrasonic Examination Of Austenitic Welds, Anon.V-766-84, Guidance On The Assessment Of Ultrasonic Indications, Anon.V-767-84, Ultrasonic Examination Of Welds In Tubular Structures, Anon.V-769-84, Acceptance Criteria For Conventional Radiographic Examination Of Welds, Anon.V-771-84, The Modelling Of Electrical Current Methods Of NDT, Boness, K.D., Betzold, K. andBecker, R.V-775-84, Evaluation Of An IIW Work Programme On Acoustic Emission, Forli, O.V-783-85, Rapport Annuel, Anon.V-788-85, Annual Report 1984/85. Work Programme, Membership List, Meyer, H.-J.V-789-85, Guideline For Quality Assurance Activities With Consideration Given To Special Processes, Anon.V-790-85, Guideline For Selecting Assurance Levels In Welding Technology, Anon.V-791-85, Annual Report 1984/85, Sub-Commission VE, Holler, P.V-792-85, The Modelling Of Electrical Current NDT Methods And Its Application To Weld Testing, Becker, R., Betzhold, K., Boness, K.D., Collins, R., Holt, C.C. and Simkin, J.V-794-85, Guidance And Recommendations On The Evaluation Of Ultrasonic Signals In Manual Weld Examination, And On Defect Acceptance/Rejection Criteria, Anon.V-795-85, Handbook On The Ultrasonic Examination Of Austenitic Welds, Anon.V-796-85, Rapport Annuel De La Sous-Commission VA-Radiographie. Période De Juillet 1984 À Juin 1985, Charlier, J.V-797-85, X-Ray Real-Time Imaging For Weld Inspection, Anon.V-798-85, Working Group 2 Commission V -Underwater Non-Destructive Testing Biennial Report 1983/1985, Anon.

Page 117

V-799-85, Working Group 4 Commission V Acoustic Emission Biennial Report 1983/85, Forli, O.V-800-85, Commission V / Strasbourg Annual Assembly 1985. Agenda, Anon.V-809-86, Commission V / Tokyo Annual Assembly 1986. Agenda, Anon.V-810-86, Ultrasonic Inspection Of Welded Joints In Multilayer Pipes, Troitskii, V.A., Bondarenko, Y.K. and Gurvich, A.K.V-811-86, Rapport Annuel De La Sous-Commission VA - Radiographie, Anon.V-812-86, X-Ray Real Time Imaging For Weld Inspection. 2nd Progress Report, Anon.V-813-86, Recommendations For Radiographic Emergency Equipment, Anon.V-815-86, Annual Report 1985/86, Sub-Commission VE,, Holler, P.V-816-86, Nondestructive Measurement And Analysis Of Residual Stress At Welds Survey To The State Of The Art, Anon.V-817-86, Working Programme On Comparing And Rating Of Numerical Eddy-Current ModelsFor Weld Testing, Anon.V-818-85, Annual Report 1985 /86, Work Program, Membership List, Meyer, H.-J.V-820-86, Annual Report 1986 Sub-Commission VF Significance Of Defects, Hansen, H.V-822-86, Summary Of Existing Underwater NDE Personnel Qualification Scheme, Wedgwood, F.A.V-824-86, Application To The Steel Structure Of Non-Destructive Stress Measurement By Magnetostriction, Ishikawa, N. and Fujimori, T.V-826-86, Quality Requirements For Corner Weld Of Truss Chord Members And Inspection By Ultra-Sonic Test, Tajima, J., Fukui, T., Sakamoto, K. and Toriumi, R.V-827-86, Annual Report 1984/85 And Strasbourg Assembly, Sharpe, R.S.V-831-86, Daily Record Of Annual Assembly Meetings (Tokyo) Friday 18th July 1986, Anon.V-832-86, Meeting Of ISO-TC 10 Unification Of Requirements In The Field Of Metal Welding. Observer Report, Hofe, V.V-833-86, Testing, Measurement And Control Of Welds Annual Report 1985/86 And Tokyo Assembly, Sharpe, R.S.V-834-87, Annual Report 1986/87, Work Programme, Membership List, Meyer, H.-J.V-835-87, Automated Ultrasonic Weld Inspection. Guidance On The Merits, Performance Requirements, Selection And Applications Of Automated Ultrasonic Inspection For Welds, Anon.V-836-87, X-Ray Real-Time Imaging (XRTI) For Weld Inspection. 3rd Progress Report, Revised, Halmshaw, R.V-837-87, Commission V / Sofia Annual Assembly 1987. Agenda, Anon.V-838-87, Annual Report 1987 Sub-Commission VF. Significance Of Defects, V-839-97, Technical Recommendation On The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products(Draft For International Technical Recommendation), Anon.V-840-87, The Application OF Fitness For Purpose Criteria In Design, Fabrication And Inspection Of Welded Products, Anon.V-842-87, Annual Report Of Sub-Commission VC, Anon.V-842-87, Sub-Commission VC Annual Report 1987, Wustenberg, H.V-848-87, Rapport Annuel De Sous-Commission VA Radiographie, Anon.V-850-87, Multiple Source Exposure Technique. A New Method In Industrial Radiography, Chandrachoodan, PP. and Sundaresan, M.V-851-87, Procedure For Measuring Effective Focal Spot Sizes Of Microfocus X-Ray Sets In

Page 118

The Range Between 5 And 300 (m, Nabel, E. and Heidt, H.V-852-87, Classification Of X-Ray Films. New Results And Proposals, Heidt, H., Schnitger, D.and Stade, J.V-853-87, Classification Of X-Ray Films For The Industrial X-Ray Examination, Heidt, H. and Stade, J.V-855-87, A Simple Weld Monitoring System, Subba, S.V., Shrinivasan, K.V. and Annamalai, M.V-856-87, An Introduction To Acoustic Emission Technology For In-Process Inspection Of Welds, Goswami, G.L.V-857-87, Welding Assessment Of FBTR Fabricator Vessel, Shanmugam, K. and Bhoje, S.B.V-858-87, Assessment On Weld Quality Of Low Alloy Steel Boiler Drums - A Critical Study, Mishra, B.B.V-867-87, Testing Measurement And Control Of Welds Annual Report 1986/87 And Sofia Assembly, Sharpe, R.S.V-867-87, Testing Measurement And Control Of Welds Annual Report 1986/87 And Sofia Assembly, Sharpe, R.S.V-868-88, Estimation Of Fatigue Crack Growth In Corner Weld By Ultrasonic Examination, Tajima, J., Miki, C. and Fukazawa, M.V-873-88, Annual Report 1987/88, Sub-Commission VE, Holler, P.V-874-88, Feasibility Study On Non-Destructive Methods For Fatigue Crack Detection In Steel Bridge Members, Miki, C., Fukazawa, M., Katoh, M. and Ohune, H.V-875-88, Annual Report 1987/88, Work Programme, Membership List, Meyer, H.-J.V-876-88, New Strategies And Concepts In Welding Process Monitoring, Anon.V-877-88, Annual Report 1988. Sub-Commission VF Significance Of Defects, V-878-88, An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Welded Products. Part 1: General Principles. Part 2: SafetyConsiderations. Part 3: Instantaneous Failure. Part 4: Fatigue. Part 5: Inspection In Relation To Fitness For Purpose Of Welded Products. Apendix 6: X-Part 5, Anon.V-879-88, Tests For Evaluation And Characterization Of Black Light Lamps And Fluorescent Penetrants, Calcagno, G., Costa, G. and Marmigi, R.V-880-88, X-Ray Real-Time Imaging (Radioscopy) For Weld Inspection: I.I.W. 4th Progress Report, Halmshaw, R.V-881-88, Effect Of Weld Reinforcement On The Distribution Of Leakage Flux Densities In Yoke Method, Nishio, K., Katoh, M., Mukae, D. and Senda, T.V-882-88, Sub-Commission VC Annual Report 1987/88, Anon.V-883-88, Commission V / Vienna Annual Assembly. Agenda, Anon.V-891-88, Testing Measurement And Control Of Welds Annual Report 1987/88 And Vienna Assembly, Sharpe, R.S.V-892-88, Peculiarities Of Automated Ultrasonic Testing Of Welded Joints In Special-Purpose Structures Welded By Different Methods, Naida, V.L., Krug, G.A., Khairetdinov, R.K. and Tkachenko, A.A.V-893-89, Evaluation Of The Reliability Of Ultrasonic Inspection, Camerini, C.S.V-894-89, Summary Report: X-Ray Real-Time (Radioscopy) For Weld Inspection, Anon.V-895-89, Typical Usage Of Radioscopic Systems: Replies To A Survey, Siewert, T.A.V-896-89, The Increase In Efficiency Of The Automated Ultrasonic Inspection, Troitskii, V.A., Bondarenko, Yu.K. and Eskov, Yu.B.V-897-89, Automated Ultrasonic Testing Of Pipeline Welded Joints, Troitskii, V.A.,

Page 119

Shevchenko, I.Ya. and Baldakov, V.F.V-898-89, The Set Of Training Devices For Welded Joint Ultrasonic Inspection Operators, Bondarenko, Yu.K., Gurvich, A.K. and Eskov, Yu.B.V-899-89, Annual Report Of Sub-Commission VA, Anon.V-901-89, Draft. Classification Of X-Ray Film Systems For Industrial Radiography. Part 1, Heidt, H.V-902-89, Draft. Proposed Modification Of Existing ISO-Standards, Anon.V-904-89, Working Group 3 Of IIW Commission V. Annual Report 1988/89, Work Programme, Membership List, Meyer, H.-J.V-906-89, Example Of An Analysis For Introduction Of A CAQ System For The Boiler-Making Industry, Anon.V-907-89, Working Group 2 Commission V -Offshore Non-Destructive Testing- Annual Report 1988/89, Anon.V-908-89, Information On Practices For Underwater Non-Destructive Testing, Anon.V-909-89, Effects Of Residual Sodium Thiosulphate And Of Storing Conditions On The Stability Of Radiographic Images, Calcagno, G., Costa, G. and Marmigi, R.V-910-89, Automatic Ultrasonic Testing Of Weld Defects, Yasuda, O., Horikawa, I., Sekiya, A. and Horikawa, K.V-911-89, Flaw Growth Monitoring As An Aid To Lifetime Prediction, Silk, M.S.G., Whaphman,A.D. and Hobbs, C.P.V-914-89, Annual Report 1989 Sub-Commission VF Significance Of Defects, Hansen, B.V-915-89, Relations Between Conventional Statistical Quality Control And Nondestructive Examination Of Welds, Anon.V-916-89, Commission V / Helsinki Annual Assembly 1989. Agenda, Anon.V-917-89, Annual Report 1988/89, Sub-Commission VE, Holler, P.V-923-89, Quality Control And Quality Assurance Of Welded Products Annual Statement 1988/89, Sharpe, R.S.V-924-90, Annual Report For Sub-Commission VA, Anon.V-925-90, Future Work Program Of Sub-Commission VA, Anon.V-926-90, ROC - Study Of Inspection Performance In Radiographic Testing Of Welded Joining, Nockemann, Chr., Heidt, H. and Thomsen, N.V-927-90, Background Information From The NIST Sphere Development Program, Siewert, T.A.V-929-90, Trends In Architecture And Implementation Of International/European Standards And Certification Systems In The Quality Arena During The 1990's`, Meyer, H.J.V-930-90, The On-Line Ultrasonic Assessment Of Weld Quality, Scruby, C.B., Stares, I.J., Duffill, C. and Haywood, B.C.G.V-931-90, Quality And The Human Factor, Anon.V-932-90, Annual Report 1990 Sub-Commission VF Significance Of Defects, Hansen, B.V-933-90, Annual Report 1989/90, Sub-Commission VE, Holler, P.V-934-90, Sub-Commission VC Annual Report 1989/90, Anon.V-935-90, Commission V Working Group 2 Annual Report 1989/90, Anon.V-936-90, The Reliability And Cost-Effectiveness Of Offshore Inspection, Forli, O.V-937-90, Commission V L'Ordre Du Jour/Agenda Montreal 1990, Forli, O.V-938-90, White Light Intensity Effects On The Fluorescent Penetrant Indication Seeability Under Ultraviolet Light, Calcagno, G., Costa, G. and Marmigi, R.V-939-90, Handbook On The Ultrasonic Examination Of Austenitic Cladded Materials, Anon.

Page 120

V-940-90, On The Problem Penetrant Fluorescence Measurement: Standards And Strumentations, Cevenini, M., Lezzi, F., Marmigi, R. and Peri, F.V-947-90, Commission V Annual Statement 1989/90, Anon.V-948-91, Commission V Ordre Du Jour La Haye 1991 / Commission V Agenda The Hague 1991, Forli, O.V-949-91, Annual Report For Sub-Commission VA, Anon.V-950-91, Sub-Commission VC Annual Report 1990/91, Wustenberg, H.V-951-91, Annual Report 1990/91, Sub-Commission VE, Holler, P.V-952-91, Annual Report 1991 Sub-Commission VF Significance Of Defects, Hansen B.V-953-91, Commission V Working Group 2 Annual Report 1990/91, Forli, OV-954-91, Working Group 3 Of IIW Commission V Annual Report 1990/91, Work Program, Membership List, Meyer, H.-J.V-955-91, ISO/TC 176 Quality Management And Quality Assurance Vision 2000 - A Strategy For Individual Standards Implementation In The Quality Arena During The 1990's, Anon.V-956-91, European Harmonization, CEN/CEMELEC Activities And Member Countries Response To Quality System Assessment And Certification, Anon.V-957-91, ISO/CEN State Of The Art Related To Welding Technology In Quality Assurance, Inspection And Personnel Qualification, Anon.V-958-91, Quality Policies And Standardization In Brazil For Welded Constructions, Anon.V-959-91, Failure Mode And Effect Analysis (FMEA) In Welded Constructions, Anon.V-960-91, Economic Advantages Of CAQ Demonstrated By The Example Of A Company Specialized In The Manufacture Of Welded Stainless Tubes, Anon.V-961-91, Non-Destructive Testing - Radiographic Examination Of Metallic Materials By X - And Gamma Rays - Basic Rules, Anon.V-962-91, Non-Destructive Testing Industrial Radiographic Film. Part 2:Control Of Film Processing By Means Of Reference Values, Anon.V-963-91, Qualification Of Radioscopic Systems For Weld Inspection. Part 1: Quantitative Measurement Of Imaging Properties, Anon.V-964-91, Qualification Of Radioscopic Systems. Part 2: Qualitative Control And Long Term Stability Of Imaging Devices, Anon.V-965-91, An Image Quality Indicator Design For Use With Highly Penetrating Radiation, Siewert, T.A. and Austin, M.W.V-966-91, Comparison Of Ultrasonic Echo And Thermal Inspection Methods, Troitskii, V.A. and Zagrebelny, V.I.V-967-91, Development And Optimization Of NDT For Practical Use. NORDTEST NDT Programme - Project Presentation, Forli, O.V-969-91, Development And Optimization Of NDT For Practical Use. Reliability Of Radiography And Ultrasonic Testing, Forli, O.V-970-91, Reliability Of Magnetic Particle And Liquid Penetrant Inspection, Kauppinen, O, andSillanpaa, J.V-971-91, Reliability Optimization Of Manual Ultrasonic Weld Inspection, Anon.V-972-91, Assessment Of Nuclear Reactor Fabrication: A Regulatory View, Nicholson, R.D. and Hemsworth, B.V-973-91, PISC III - A Status Report, Crutzen, S., Jehenson, P., Nichols, R. and Strosnider, J.V-974-91, Work In The PISC Programme Relevant To Qualification And Performance Demonstration Of NDT Techniques, Nichols, R., Crutzen, S., Jehenson, P. and McDonald, N.V-975-91, Parametric Study On The Effect Of UT Equipment Characteristics (EEC) On

Page 121

Detection, Location And Sizing, Lakestani, F., Borloo, E.E. and Merli, F.V-976-91, PISC II Parametric Studies: Round Robin Test On The Measurement Of UT Instrument And Transducer Characteristics (MITC), Borloo, E.E.V-983-91, IIW Commission V Annual Statement 1990/91, Forli, O.V-984-92, Annual Report 1992 For Sub-Commission VA, Heidt, H.V-985-92, Annual Report 1991/92 Sub-Commission VC, Wustenberg, M.V-986-92, Annual Report 1992, Sub-Commission VE, Dobmann, G.V-989-92, Working Group 3 Of IIW Commission V Annual Report 1991/92, Work Program, Membership List, Meyer, H.-J.V-990-92, Characterization Of Wet Magnetic Fluorescent Particles: First Experimental Results,Calcagno, G., Costa, G. and Marmigi, R.V-991-92, ISO/TC 176 Quality Management And Quality Assurance; Situation 1992: Short-Term And Long-Term Revision OF ISO 9000 Series New Individual Standards Forum ISO 9000, Anon.V-992-92, ISO/CEN State Of The Art 11991/92 Related To Welding Technology In Quality Management, Inspection And Personnel Qualification, Anon.V-993-92, Evaluation And Qualification Standards For An X-Ray Laminography System, Siewert, T.A., Austin, M.W., Lucey, G.K. and Plott, M.J.V-994-92, Role Imaging Sensors In Radiation Methods, Link, R.V-995-92, Residual Stresses And Their Evaluation In Welds, Palanichamy, P., Joseph, A., Bhattacharya, D.K. and Raj, B.V-996-92, Commission V Ordre Du Jour Mardrid 1992 / Commission V Agenda Madrid 1992, Forli, O.V-C-243-72, Summary Of Items Concerning Calibration Of Ultrasonic Equipement, Wustenberg, H.V-C-435-84, ISO/TC 44/SC 5 N 172 E, Anon.V-C-436-84, Fundamental Influences On The Ultrasonic Inspection At Cladded Nuclear Components, Wustenberg, H., Schulz, E. and Erhard, A.V-C-439-85, Automatic Ultrasonic Inspection Method For Partial-Penetration Welded Corner Joints In Bridge Structure, Wada, H., Yajima, M., Yagi, T. and Urakawa, S.V-C-458-87, Report On NDT-Relevant Items Of The Sub-Commission VF Intermediate Meeting On 12th Of November 1986 London, Wustenberg, H.V-C-461-87, Minutes Of The Intermediate Meeting Of Sub-Commission VC January 26, 1987, Paris, Institut De Soudure, Anon.V-C-462-87, The Application Of Fitness For Purpose Criteria In Design, Fabrication And Inspection Of Welded Products, Anon.V-C-463-87, Evaluation Of Some Non-Destructive Examination Methods On Welds With Intended Defects, Dijkstra, F.H.V-C-465-87, IIW Sub-Commission VC - List Of Members, Anon.V-C-467-87, Minutes Of The Intermediate Meeting Of Sub-Commission VC January 26, 1987, Paris, Institut De Soudure, Anon.V-C-559-87, Probes For The Ultrasonic Inspection Of Welds - Design, Properties And Characteristic Datas, Wustenberg, M.H.V-C-842-87, Annual Report 1987 Of Sub-Commission VC, Anon.VF-130-82, Quality Classes For Arc Welded Joints In Steel Materials, Anon.VF-162-86, Foreword To IIW Documents Related To The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Asses The Fitness For Purpose

Page 122

Of Welded Products, Anon.VF-177-90, Annual Report 1990 Sub-Commission VF Significance Of Defects, Hansen, B.VI-497-80, Liste Selective Des Procedes De Soudage, De Brasage Fort Et De Brasage Tendre - Termes Et Definitions, Anon.VI-576-85, Annual Report Of Commission VI Terminology, Stular, P.VI-604-87 E, List Of Welding And Allied Processes With Definitions, Classified According To Energy Carrier. Part 2, Brazing And Soldering Processes, Anon.VI-615-88, Annual Statement Of Commission VI Terminology. Annual Assembly Of Vienna (Austria) - July 1988, Stular, P.VI-625-89, Annual Report Of Commission VI Terminology. Annual Assembly Of Helsinki (Finland) - September 1989, Stular, P.VI-642-91, German Supplement To IIW Document VI-632-90 EF Terminology On Robotics Of Welding And Allied Processes, Anon.VI-675-94, RTM - Fascicule N(5: Coupage Thermique / MCT - Part 5:Termal Cutting, Anon.VII-1945-02, Extracts (pages 29-39) on the carcinogenicity of chrome and chroumium compounds taken from Scientific Basis for Swedish Occupational Health Standards XXI, by the Criteria Group for Occupational Standards, edited by Johan Montelius and published in 2000 by the National Institute for Working Life, S-112 79 Stockholm, Sweden, Sjogren, Bengt and McMillan, G.H.G.VII-1947-02, Occupational risk factors, ultraviolet radiation, and ocular melanoma: a case-control study in France by Guenel P et al, published in Cancer Causes and COntrol Vol 12: 452-459, 2001, Moulin, J-JVIII-1000-82, Medical Examination Of Welders In Germany, F.R., Zober, A. and Grothe, I.VIII-1002-82, Method Of Measurement For Gas Concentration In Welding Environment, Anon.VIII-1003-82, Eye Protectors For Radiations, Anon.VIII-1004-82, Lead Exposure Of Welders And Bystanders In A Ship Repair Yard, Grandjean, P. and Kon, S.H.VIII-1004-88, Improved Welding Gun With Built-In Fume-Extractor, Bengtsson, G., Back, P., Dahlqvist, P. and Severinsson, K.VIII-1006-82, Mortality Among Welders, Including A Group Exposed To Nickel Oxides, Polednak, A.P.VIII-1008-82, A Description Of The Activities Of Working Group On Risk Assessment, Stern, R.M.VIII-1009-82, Standard For The Measurement Of Noise Emitted From Oxy-Fuel Gas Equipments. Document I-698-81/OE, Guterman, T. and Copleston, F.W.VIII-1011-82, Eye Findings In Arc Welders, Ambrosi, L.VIII-1012-82, A Protocol For The Study Of Health Effects On Welding, Stern, R.M.VIII-1013-82, Extended Bibliography Pertinent To Studies Of Toxic Substances To Which Welders Are Exposed, And The Resulting Health Effects, Stern, R.M.VIII-1014-82, Origin Of Mutagenicity Of Welding Fumes In S. Typhimurium,, Stern, R.M.VIII-1015-82, Interlaboratory Comparison Of Cr(VI) Analysis Of Welding Fumes, Stern, R.M. and Thomsen, E.VIII-1016-82, Education And Training In Occupational Hygiene, Hewitt, P.J.VIII-1017-82, Problems Involved In The Analysis Of Chromium In Welding Fumes, Gray, C.N., Hewitt, P.J., Hicks, R. and Blunsum, M.VIII-1019-82, Apparatus For The Controlled Generation Of Fume From Semiautomatic Welding Processes, Anon.

Page 123

VIII-1020-82, Investigations Of The Characteristics Of Shielded Metal Arc Welding Fumes, Anon.VIII-1021-82, A Preparatory Study Of The Exposure Of Welders To Toxic Substances And The Resulting Health Effects, Stern, R.M.VIII-1022-82, Lung Cancer Among Welders, Beaumont, J.J. and Weiss, N.S.VIII-1023-82, Respiratory Cancer In A Cohort Of Nickel Sinter Plant Workers, Chovil, A.VIII-1024-82, Epidemiological Study Of Workers Engaged In The Manufacture Of Chromium Compounds, Satoh, K., Fukuda, Y., Torii, K. and Katsuno, N.VIII-1026-82, Minutes Of The Meeting Of Working Group A, Brunschwiler, P.VIII-1027-82, Cadmium, Copper And Zinc In The Urine Of Welders Using Cadmium-Containing Silver Solder, Suzuki, Y.VIII-1028-82, Lowering Of Ozone Concentration Under Coexistence With Metal Fume, Yamaguchi, H., Yagami, T., Honma, K., Sano, H. and Araki, Y.VIII-1029-82, Investigations On Fumes Generated By Shielded Metal Arc Welding, Kobayashi,M.VIII-1030-82, Absences Attributed To Respiratory Diseases In Welders, Fawer, R.F.VIII-1031-82, Possible Dangers To The Respiratory Tract From Welding Fumes - Methods Of Approach In An Industrial Health Care Context And Results, Zober, A.VIII-1032-82, Comments On Doc VIII-981-81 Underwater Plasma Cutting, Brunschwiler, P.VIII-1036-82, Interlaboratory Calibration Of A Standardized Analytical Method For Hexavalent And Total Chromium In Welding Fumes, Anon.VIII-1037-82, Pulmonary Fibrosis In An Aluminium Arc Welder, Vallyathan, V., Bergeron, W.N., Robichaux, P.A. and Craighead, J.E.VIII-1038-82, Interlaboratory Comparison Of Cr (Vi) Analysis Of Welding Fumes, Stern, R.M. and Thomsen, E.VIII-1039-82, Chromium Compounds: Production And Occupational Exposure, Stern, R.M.VIII-1040-82, Fibrogenic Potential Of Welding Fumes, Stern, R.M., Pigott, G.H. and Abraham, J.L.VIII-1041-82, In Vitro Assessment Of Equivalence Of Occupational Health Risk: Welders, Stern, R.M.VIII-1042-82, In Vitro RPM Fibrogenic Potential Assay Of Welding Fumes, Stern, R.M. and Pigott, G.H.VIII-1043-82, Assessment Of Risk Of Lung Cancer For Welders, Stern, R.M.VIII-1044-82, Detection By Replica Plating Of False Revertant Colonies Induced In The Salmonella/Mammalian Microsome Assay By Hexavalent Chromium, Pedersen, P., Thomsen, E. and Stern, R.M.VIII-1045-82, Minutes Of The Meeting Of September 7, 1982, Anon.VIII-1048-82, Process Dependent Threshold Limit Values In Welding, Hansen, E.B.VIII-1050-82, X-Ray Fluorescent Method Of Determining The Element Composition Of A Welding Aerosol Solid Component, Vojtkevich, V.G.VIII-1051-82, Methods Of Study Of Welding Aerosols (Review), Vojtkevich, V.G.VIII-1054-82, Respiratory Status Of Stainless Steel And Mild Steel Welders, Kalliomaki, P.-L., Kalliomaki, K., Korhonen, O., Nordman, H., Rahkoken, E. and Vaaranen, V.VIII-1061-82, Japan Welding Engineering Society Standard WES 9005 - 1978. Methods For Chemical Analysis Of Weld Fumes Generated By Covered Electrodes, Anon.VIII-1062-82, Japan Welding Engineering Society Standard WES 9006 - 1980. Methods For Determination Of Chromium And Nickel In Stainless Steel Welding Fumes, Anon.

Page 124

VIII-1063-82, Researches On The Origin And The Characteristics Of Chromium In Stainless Steel Welding Fumes, Anon.VIII-1064-82, Japan Welding Engineering Society Standard WES 9007 - 1982. EnvironmentalControl In Welding And Cutting, Kobayashi, M.VIII-1066-83, New Approach Would Help Control Weld Fumes At Source. Part Two: MIG Fumes, Gray, C.N., Hewitt, P.J. and Dare, P.R.M.VIII-1067-83, Chromium And Asbestos As Two Probable Risk Factors In Lung Cancer Among Welders, Sjogren, B., Hogstedt, C. and Malker, H.VIII-1068-83, Biological Effects Of Light Air Ions And Their Relationship To Human Stress, Knox, S.S.VIII-1069-83, Adverse Affects Of Ultraviolet Light Therapy, Marks, J.M.VIII-1070-83, Susceptibility Bridge Magnetopneumography Of Individuals With And Without Occupational Dust Exposure, Stern, R.M. and Drenck, K.VIII-1071-83, Investigations On Chemical Composition Of Welding Fumes, Kobayashi, M., Maki, S., Hashimoto, Y. and Suga, T.VIII-1072-83, A Chromosome Study Among Stainless Steel Welds, Gerhardsson, G.VIII-1073-83, Biological And Environmental Aspects Of Chromium, Langard, S.VIII-1074-83, Action At The National Level For Improving The Education And Training Of Occupational Health Specialists, Kundiev, Y.I.VIII-1075-83, Assessment Of Training Needs, Role Of Employers' Organisations, Brandtzaeg, R.VIII-1076-83, Why Is Industrial Hygiene Lagging Behind?, Guillemin, M.P.VIII-1077-83, Methodology, Practice And Assessment Of A Health And Safety Programme Organised For Health And Safety Representatives, Whittaker, T. and Potts, P.VIII-1078-83, Towards A Safety Science At The Delft University Of Technology, Goossens, L.H.J.VIII-1079-83, Training Activities In The Field Of Occupational Safety And Health, Riese, U.VIII-1080-83, Formation Of Toxic Substances In Gas Shielding Arc Welding. Part 3: Concentration Measurements At Workplaces With Different Kinds Of Ventilation, Press, H. and Florian, W.VIII-1081-83, ELCB Developments In Design And Application, Moore, G.E.VIII-1082-83, ACGIH Threshold Limit Values, Lunau, F.W.VIII-1083-83, Arbeitsmedizinische Untersuchungen Zur Inhalativen Belastung Von Lichtbogenschmelzschwei(ern, Zober, A.VIII-1084-83, Welding Fume Removal System Cut Costs, Recirculates Air, Anon.VIII-1085-83, Chromium And Nickel In Welding Fume, Anon.VIII-1086-83, Assessment Of Welding Fume Hazards, Moreton, J.VIII-1087-83, Control Of Particulate Emissions From Electric-Arc Welding By Process Modification, Gray, C.N. and Hewitt, P.J.VIII-1088-83, Possible Cancer Risk In Stainless Steel Welding, Zober, A.VIII-1090-83, Accident Data In The New Swedish Information System On Occupational Injuries, Andersson, R. and Lagerlof, E.VIII-1092-83, Control Of Particulate Emissions From Electric-Arc Welding By Process Modification, Gray, C.N. and Hewitt, P.J.VIII-1093-83, The Welding Of Plastic, Anon.VIII-1094-83, Offshore Welded Structures - The Position Today, Anon.VIII-1095-83, Health Effects Of Occupational Exposure Of Welders To Chromium, Anon.

Page 125

VIII-1096-83, The Management Of Risk: Application To The Welding Industry, Stern, R.M.VIII-1097-83, Laboratory Validation Of Ozone Sampling With Spill-Proof Impingers, Anon.VIII-1098-83, Variations In The Chemical Composition And Generation Rates Of Fume From Stainless Steel Electrodes Under Different AC Arc Welding Conditions, Tandon, R.K.VIII-1099-83, A Corrected Version Of The Paragraph 1.4.1 Of The Document VIII-1029-82 Investigations On Fumes Generated By Shielded Metal Arc Welding, Kobayashi, M.VIII-1123-84, Welding And Human Factor / Le Soudage Et Le Facteur Humain, Kosnac, L.VIII-1124-84, Guidance On Fume Control At Welding. Brazing And Thermal Cutting, Anon.VIII-1142-84, Protect Yourself In Arc Welding. Two Posters, Beaufils, D.VIII-1147-84, Annual Report Of Commission VIII Health And Safety, Gerhardsson, G.VIII-1152-84, Researches On Fumes And Gases Emitted By Welding Primed Steels, Anon.VIII-1156-84, Health And Safety In Brazing And Allied Processes, Connell, L.D.VIII-1157-84, OSHA, Eye Experts Declare Reports On Contact Lens Fusion To Eyes Are False, Anon.VIII-1158-84, Robotique Industrielle Et Securite, Anon.VIII-1159-84, The Determination Of Manganese In Urine, Pantucek, M.B.VIII-1160-84, The Evolution Of Hexavalent Chromium In Metallic Aerosols, Gray, C.N., Goldstone, A., Dare, P.R. and Hewitt, P.J.VIII-1161-84, Some Difficulties In The Assessment Of Electric Arc Welding Fume, Hewitt, P.J. and Gray, C.N.VIII-1162-84, Welding Fume: The Problem In Comparing Electrodes, Dare, P.R.M. and Hewitt,P.J.VIII-1163-84, Disposable Lighters, Duncan, B.C.VIII-1164-84, Kidney Function In Stainless Steel Welders, Littorin, M., Welinder, H. and Hultberg, B.VIII-1165-84, Sampling And Analysis Of Hexavalent Chromium During Exposure To Chromic Acid Mist And Welding Fumes, Blomquist, G., Nilsson, C.-A. and Nygren, O.VIII-1166-84, Odorisation Of Bulk Oxygen Supplies, Anon.VIII-1167-84, Allergic Effects Of Welding And Allied Processes. - Literature Survey, Anon.VIII-1168-84, Formation Of Toxic Substances In Gas Shielded Arc Welding, Press, H. and Florian, W.VIII-1169-84, An Investigation Of Fibrogenic And Other Toxic Effects Of Arc-Welding Fume Particles Deposited In The Rat Lung, Hicks, R., Al-Shamma, K.J., Lam, H.F. and Hewitt, P.J.VIII-1171-84, Investigation Of Technique For The Analysis Of Hexavalent Chromium, Total Chromium And Total Nickel In Welding Fume: A Co-Operative Study, Moreton, J., Bettelley, J., Mathers, H., Nicholls, A., Perry, R.W., Ratcliffe, D.B. and Svensson, L.VIII-1172-84, Nonionizing Radiations - Current Issues And Controversies - A Minisymposium, Anon.VIII-1173-84, Adaption Of The Lifetime Health Monitoring Concept To Defined Employee Groups Not At Exceptional Risk, Guidotti, T.L.VIII-1174-84, Cancer II. Distortions In Standardized Rates, Burack, T.S., Burack, W.B. and Knowiden, N.F.VIII-1175-84, The Relationship Between Plasma Fluoride; Urinary Excretion Rate And Urine Fluoride Concentration In Man, Ekstrand, J. and Ehrenebo, M.VIII-1176-84, The Health Of Welders In Naval Dockyards. Final Summary Report, McMillan, G.H.G.VIII-1177-84, No Cytogenetic Effects In Lymphocytes Of Stainless Steel Welders, Littorin, M.,

Page 126

Hogstedt, B., Stromback, B., Karlsson, A., Welinder, H., Mitelman, F. and Skerfving, S.VIII-1178-84, Investigation Of Techniques For The Analysis Of Hexavalent Chromium, Total Chromium And Total Nickel In Welding Fume: A CO-Operative Study, Moreton, J.VIII-1179-84, Retention And Clearance Of Stainless Steel Shieldgas Welding Fumes In Rat Lungs, Kalliomaki, P.-L., Tuomisaari, M., Lakomma, E.-L., Kalliomaki, K. and Kivela, R.VIII-1180-84, Welding Fume: The Problem In Comparing Electrodes, Dare, P.R.M. and Hewitt,P.J.VIII-1181-84, Subject Matters From Selected Committee On Underwater Welding, Anon.VIII-1182-84, Cross Sectional Study Of Respiratory Effects Of Arc Welding, Zober, A. and Weltle, D.VIII-1183-84, Radiofrequency Electromagnetic Leakage Fields From Plastic Welding Machine. Measurements And Reducing Measures, Eriksson, A. and Hansson Mild, K.VIII-1184-84, Priority Subjects From Select Committee On Aluminium And Aluminium Alloys, Anon.VIII-1185-84, Safety In Welding And Cutting, Anon.VIII-1186-84, Characterization Of Arc Welding Fume, Anon.VIII-1187-84, Effects Of Welding On Health IV (1), Anon.VIII-1188-84, Effects Of Welding On Health IV (2), Anon.VIII-1189-84, Observation On Development Of Pneumoconiosis Among Manual Arc Welders In Dalian Shipyard. (1960 - 1982), Anon.VIII-1191-84, Use Of Eye Protectors, Anon.VIII-1192-84, Air Borne Iron And Manganese In Welding Fumes, Narayanan, B.VIII-1193-84, Group Inhalatorium For Welders / Salle D'Inhalation Par Groupes Pour Les Soudeurs, Kosnac, L., Olah, L., Miklovic, F. and Skoda, V.VIII-1194-84, Radionuclide X-Ray-Fluorescent Analysis And Study Of Welding Aerosols, Olah,L.VIII-1195-84, Contact Lens Use In Industry Draft, Kennebeck, M.E.VIII-1196-84, ELF Magnetic Fields In Electro-Steel And Welding Industries, Lovsund, P., Oberg, P.A. and Nilsson, S.E.G.VIII-1197-84, Chrome Plating: Symptoms, Findings In The Upper Airways, And Effects On Lung Function, Lindberg, E. and Hedenstierna, G.VIII-1198-84, Occupational Asthma In Stainless Steel Welders, Anon.VIII-1199-84, Risk Management And Risk Assessment In The Stainless Steel Welding Sector, Stern, R.M.VIII-1203-84, Welding And Tumors, Sjogren, B.VIII-1204-84, Epidemiological Study Protocol On Health Effects Of Occupational Exposure Of Welders To Chromium And Nickel, AnonVIII-1205-84, Proposal For Commission VIII Workshop Quality Control Of Occupational Monitoring And Welding Fume Analysis, Stern, R.M.VIII-1206-84, Cr(VI) And Other Metallic Mutagens In Fly Ash And Welding Fumes, Stern, R.M.,Thomsen, E. and Furst, A.VIII-1208-84, Occupational Exposure In The Welding Industry Health Risk Assessment, Stern,R.M.VIII-1209-84, Cancer Fears For Welders, Anon.VIII-1210-84, Training In Safety And Health - The Institutions Syllabus Review, Hale, A.R.VIII-1211-84, Bronze Welding And / Or Brazing With Autoflux, Williams, E.VIII-1212-84, Cost Effective Health And Safety, Huges, P.W.

Page 127

VIII-1213-84, A Case Study- Prosecution Relating To Cadmium Exposure, Cameron, W.R.VIII-1214-84, Putting Robots On The Right Track, Anon.VIII-1215-84, Brno's 7th International Welding Engineering Exhibition, Anon.VIII-1216-84, Respiratory Effects Of Static Lung Loads During Exercise At Depth, Lundgren, C.E.G.VIII-1217-84, Cardiac Cell Functions Under High Hydrostatic Pressure, Hogan, P.M.VIII-1218-84, Man Under High Pressure; Defect And Recovery In Behavioral Functions, Hugon, M.VIII-1219-84, Comparative Effect Of Compression Rate And Trimix (He/N2/O2) On Performance At Depths To 686m, Bennett, P.B. and Mcleod, M.VIII-1220-84, Variation In Response To Different Rates Of Body Cooling, Webb, P.VIII-1221-84, Body Fluid Balance In High Pressure Balance, Hong, S.K., Claybough, J.R. and Shiraki, K.VIII-1222-84, Atmospheric / Unmanned: The Future Of Deep Diving?, Bachrach, A.J.VIII-1225-84, Barium In Welding Fume, Anon.VIII-1226-84, Proces-Verbal De La Reunion Intermediaire Du Groupe De Travail C Du 23 Janvier 1984 A Paris, Granjon, M.L.VIII-1227-84, Annual Report From Working Group D, Szelagowski, P.VIII-1228-84, Hyperbaric Occupational Hygiene And Toxicology, Anon.VIII-1230-84, The Training And Education Of Risk Managers, Sutherland, D.VIII-1233-84, Urinary Fluoride Concentration As An Estimator Of Welding Fume Exposure From Basic Electrodes, Sjogren, B., Hedstrom, L. and Lindstedt, G.VIII-1235-84, Universal Glasses For Gas Welders With Injured Sight, Stanimir, B. and Milos, C.VIII-1236-84, The Use Of Contact Lenses During Welding And Cutting Operations Is Dangerous Or Not?, Iraggi, A.VIII-1237-84, Contact Lenses: Risks Involved In Certain Occupations, Chiappino, G., Miglior, M., Terrana, T.VIII-1238-84, Occupational Asthma Induced By Chromium And Nickel Sensitivity: An Expanding Problem For Arc Welders, Ambrosi, L.VIII-1239-84, Questionnaire For Evaluation Of The Work In The Technical Commissions (VIII-1170-84), Gerhardsson, G.VIII-1240-84, Evaluation And Control Of Fumes Produced During Welding. Volume 1 - Problem Survey /Summary/, Anon.VIII-1245-85, Annual Statement Of Commission VIII Health And Safety, 1985, Anon.VIII-1246-85, Agenda For The Annual Assembly 1985, Anon.VIII-1249-85, List Of Working Groups In Commission VIII, 1985, Anon.VIII-1250-85, Analysis Of Welding Aerosols Performed By Neutron Activation Analysis, Jenis, V.VIII-1251-85, Determination Of Radiation Doses In Some Welding Processes, Lego, J. and Hanitz, F.VIII-1252-85, Loading Of Arms In Manual Arc Welding, Svabova, K., Vlk, Z. and Malek, B.VIII-1253-85, Analytical Data. Effect Of pH On Chromium (VI) Species In Solution, Tandon, R.K., Crisp, P.T. and Ellis, J.VIII-1254-85, Fume Generation And Melting Rates Of Shielded Metal Arc Welding Electrodes, Tandon, R.K., Ellis, J., Crisp, P.T. and Baker, R.S.VIII-1255-85, Estimation Of Exposure To Welding Fume Using Magnetopneumography,

Page 128

Naslund, P.-E., Hogstedt, P., Hernberg, S. and Kadefors, R..VIII-1256-85, Magnetopneumography: Methodological Aspects Of Non-Invasive Measurement Of Iron Oxide Retained In Lungs / Summary/, Hogstedt, P., Kadefors, R. and Naslund, P.-E.VIII-1257-85, Researches On Fumes And Gases Emitted By Welding Primed Steels. Summary Of Doc. VIII-1152-83, Anon.VIII-1258-85, Chromium (VI) And Apparent Phenotypic Reversion In Salmonella TA100, Baker, R.S.U., Bonin, A.M., Arlauskas, A., Tandon, R.K., Crisp, P.T. and Ellis, J.VIII-1259-85, Mortality Study Of Nickel-Cadmium Battery Workers By The Method Of Regression Models In Life Tables, Sorohan, T. and Waterhouse, J.A.H.VIII-1260-85, Study Of Kinetics Of Chromium And Nickel In Biological Material During A Week Of Arc Welding Work Using Chromium-Nickel-Containing Filler Metals, Zober, A., Weltle, D. and Schaller, K.H.VIII-1262-85, Biological Indicators For The Assessment Of Human Exposure To Industrial Chemicals. Chromium, Franchini, R., Mutti, A., Cavatorta, E., Pedroni, C. and Borghetti, A.VIII-1263-85, Biological Indicators For The Assessment Of Human Exposure To Industrial Chemicals. Copper, Triebig, G. and Schaller, K.H.VIII-1264-85, Cytogenetic Analysis Of Peripheral Blood Lymphocytes From Stainless Steel Welders, Koshi, K., Yagami, T. and Nakanishi, Y.VIII-1266-85, Fume Emission From Welding Of Stainless Steel. Summary And Conclusions Of Two Reports From The Welding Institute, Anon.VIII-1267-85, Respiratory Symptoms And Pulmonary Functions Among Welders Working WithAluminium, Stainless Steel And Railroad Tracks, Sjogren, B. and Ulfvarsson, U.VIII-1268-85, Exposure And Urinary Excretion Of Aluminium During Welding, Sjogren, B., Lidums, V., Hakansson, M. and Hedstrom, L.VIII-1269-85, Influence Of Submerged Electrical Welding / Cutting On Dental Amalgam In Swedish Divers, Ortendahl, T.W. and Holland, R.I.VIII-1270-85, Evaluation Of Oral Problems In Divers Performing Electrical Welding And Cutting Under Water, Ortendahl, T.W., Dahlen, G. and Rockert, H.O.E.VIII-1271-85, Experimental Investigations On The Effect Of Radiations Produced By A Welding Arc On Eyes With Contact Lenses, Sacca, S.C., Rolando, M. and Calabria, G.VIII-1272-85, Draft Programme Of Workshop. Personal Protectors In Welding, Tokyo July 15, 1986, Kobayashi, M.VIII-1274-85, Evaluation And Control Of Fumes Produced During Welding. Volume II - Experimental Evaluation /Summary/, Anon.VIII-1276-85, Cancer Risk Of Arc Welders Exposed To Fumes Containing Chromium And Nickel, Becker, N., Claude, J. and Frentzel-Beyme, R.VIII-1277-85, Worker Safety Makes Big Strides, Birchfield, J.R.VIII-1278-85, Measurement Of The Welding Fume Quantities And Analysis Of The Fume Composition During Resistance Welding, Krause, H.-J. and Press, H.VIII-1279-85, The Application Of Physical Methods To Study The Composition Of Welding Aerosol Solid Component, Golovatyuk, A.P., Levchenko, O.G., Veblaya, T.S., Zykov, G.A., Kharchenko, N.P. and Shevchenko, L.A.VIII-1280-85, Application Of X-Ray Photoelectron Spectroscopy To Analysis Of Stainless-SteelWelding Aerosols, Tandon, R.K., Payling, R., Chenhall, B.E., Crisp, P.T., Ellis, J. and Baker, R.S.VIII-1281-85, 4e Conference A. Leroy: Synthese Des Etudes Menees A L'Institut De Soudure Sur Les Fumees De Soudage, Beaufils, D.

Page 129

VIII-1282-85, Le Projet De Norme A 81.040 Sur La Classification Des Metaux D'Apport Selon Le Taux D'Emission Et La Composition De Leur Fumee, Anon.VIII-1283-85, Le Project De Norme 81.041 Sur Les Dispositions Particulieres Applicables Aux Electrodes Enrobees, Anon.VIII-1284-85, The Intensity Of Aerosol Formation In Modulated-Current Arc Welding, Golovatyuk, A.P., Sidoruk, V.S., Levchenko, O.G., Zatserkovny, S.A. and Taraborkin, L.A.VIII-1287-85, Summary Report: International Conference On Health Hazards And Biological Effects Of Welding Fumes And Gases, Copenhagen, 18 - 21 February 1985, Anon.VIII-1288-85, Table Of Contents: International Conference On Health Hazards And Biological Effects Of Welding Fumes And Gases, Copenhagen, 18 - 21 February 1985, Anon.VIII-1289-85, The Management Of Risk For Industrial Metallic Aerosols: In Vitro Assessment Of Delivered Dose Per Unit Expose, Stern, R.M.VIII-1290-85, Drawings For Safety Posters For Welders / Maquettes Sur Le Securite Des Soudeurs, Anon.VIII-1291-85, Guide Pratique De Ventilation: 7. Operations De Soudage A L'Arc, Anon.VIII-1292-85, Proposal For A Working Group On Noise, Kennebeck, M.E.VIII-1293-85, Report To Commission VIII On ISO TC 44/SC 9, Kennebeck, M.E.VIII-1294-85, A New Design In Welding Helmets, Blomberg, G.VIII-1301-86, Agenda For IIW-Commission VIII For The Annual Assembly In Tokyo 1986, Anon.VIII-1309-86, Assessment, Management, And Reduction Of Risk For Welders, Stern, R.M.VIII-1310-86, Nickel And Chromium Compounds And Welding Fumes In Mammalian Cell Transformation Bioassay In Vitro, Stern, R.M.VIII-1311-86, Welding Fumes, Iron Oxides, And Other Metallic Industrial Aerosols, Stern, R.M.VIII-1312-86, Cytotoxic Effects Of Welding Fumes On Human Embryonic Epithelial PulmonaryCells In Culture, Hildebrand, H.F., Collyn-D'Hooghe, M. and Stern, R.VIII-1313-86, Exposure Monitoring And Chemical Analysis Of Welding Fume, Thomsen, E., Stern, R.M. and Pedersen, B.VIII-1314-86, Alternating Current Susceptibility Bridge Magnetopneumography, Drenck, K. andStern, R.M.VIII-1315-86, Welding Fumes And Chromium Compounds In Cell Transformation Assays, Hansen, K. and Stern, R.M.VIII-1316-86, Development Of An AC/DC Magnetopneumograph, Stern, R.M. and Drenck, K.VIII-1317-86, Epidemiological Studies On effects Of Exposure To ELF Electromagnetic Fields. A Review Of Literature, Knave, B.G. and Tornqvist, S.G.VIII-1318-86, Research On hazardous Optical Radiation From Welding Arcs, Anon.VIII-1319-86, Investigations On Manganese In Welding Fumes, Anon.VIII-1320-86, Investigation Of Hardfacing And HSLA Steel Electrodes, Tandon, R.K., Crisp, J.,Ellis, J. and Baker, R.S.VIII-1321-86, Exposure Of Welders To Fumes, Cr, Ni, Cu And Gases In Dutch Industries, van der Wal, J.F.VIII-1322-86, Cancer Mortality In Metal Workers, Gallagher, R.P. and Threlfall, W.J.VIII-1323-86, Respiratory Symptoms And Pulmonary Function Of Welders In Engineering Industry, Hayden, S.P., Pincock, A.C., Hayden, J., Tyler, L.E., Cross, K.W. and Bishop, J.M.VIII-1324-86, A Study On The Chemical Structure Of Particles In The Welding Fumes Of Mild And Stainless Steel, Minni, E., Gustafsson, T.E., Koponen, M. and Kalliomaki, P.-L.VIII-1325-86, Health And Safety Literature Review, Gamalski, I.U.

Page 130

VIII-1326-86, BS 6691. Fume From Welding And Allied Processes Part 1. Guide To MethodsFor Sampling And Analysis Of Particulate Matter, Anon.VIII-1328-86, Fume Extraction Guns, Back, J.VIII-1329-86, Mortality Of Welders And Other Craftsmen At A Shipyard In NE England, Newhouse, M.L., Oakes, D. and Woolley, A.J.VIII-1332-86, Proces-Verbal De La Reunion Du Goupe De Travail A Publications Sur L'Hygiene Et La Securite, 6 Septembre 1985, Strasbourg / France, Beaufils, D.VIII-1334-86, The Japanese Industrial Standard (JIS) Of Eye Protectors For Welding And Its Present Popularization --- Protecting Measure Against Blue-Light Hazards, Azuma, T., Kohmoto, K. and Misu, K.VIII-1335-86, Japanese Regulations. Regulated To Safety And Health In Welding, Anon.VIII-1336-86, Protection Of Welders From Respiratory And Ocular Damage Survey Results, Anon.VIII-1337-86, Investigation On Welding Arc Sound (Report 6) - Permissible Time Of Arc SoundExposure From Viewpoint Of Conservation Of Hearing Acuity - Futamata, M., Toh, T., Inoue, K., Maruo, H. and Arata, Y., VIII-1338-86, Investigation On Crystalline Materials In Welding Fumes Of Covered Electrodes,Kobayashi, M. and Tsutsumi, S.VIII-1339-86, Annual Report Of Working Group G On Emission And Control Of Optical And Thermal Radiation In Welding, Kobayashi, M.VIII-1340-86, Investigation On Welding Arc Sound (Report I) - Effect Of Welding Method And Welding Condition Of Welding Arc Sound -, Arata, Y., Inoue, K., Futamata, M. and Toh, T.VIII-1341-86, Investigation On Welding Arc Sound (Report II) - Evaluation By Hearing Activity And Some Characteristics Of Arc Sound -, Arata, Y., Inoue, K., Futamata, M. and Toh, T.VIII-1342-86, Investigation On Welding Arc Sound (Report III) - Effects Of Current Waveforms On TIG Welding Arc Sound -, Arata, Y., Inoue, K., Futamata, M. and Toh, T.VIII-1343-86, Investigation On Welding Arc Sound (Report 4) - Vibration Analysis Of Base Metal During Welding -, Arata, Y., Inoue, K., Futamata, M. and Toh, T.VIII-1343-89, Annual Report For 1989, AnonVIII-1344-86, Investigation On Welding Arc Sound (Report 5) - Effects Of Current Waveforms On TIG Welding Arc Sound (II), Arata, Y., Inoue, K., Futamata, M. and Toh, T.VIII-1345-86, Minutes Of Meeting Of Working Group B Ventilation, 28 January 1986, Canetti, F.VIII-1346-86, A New Spatter Release, Anon.VIII-1347-86, Program Of Workshop Personal Protectors In Welding Of IIW-Commission VIII, Anon.VIII-1348-86, Indices Of Bulk Amounts Of Welding Aerosols And Their Practical Application, Golovatyuk, A.P. and Levchenko, O.G.VIII-1349-86, New Knowledge On The Actual Pollution Caused By Active-Gas Metal-Arc Welding Of High-Alloy And Mild Steels, Farwer, A. and Schwarzbach, E.VIII-1350-86, Investigations On Fires Caused By Welding, Cutting And Related Procedures - Damage Evaluation, Holemann, H. and Worpenberg, R.VIII-1351-86, Hazards From Welding Fumes, Anon.VIII-1352-86, Welding Fumes: What We Know And Where Do We Go, Tinkler, M.J.VIII-1353-86, Speciation Of Hexavalent Chromium In Welding Fumes Interference By Air Oxidation Of Chromium, Zatka, V.J.VIII-1354-86, Morphology And Crystalline Structure Of Welding Aerosols, Kosnac, L.

Page 131

VIII-1355-86, Crystals Found Out In The Welders' Lungs, Kosnac, L.VIII-1356-86, Hygiene And Toxicology Of Filler Metals For Manual Arc Surfacing, Olah, L.VIII-1357-86, Hygienic Evaluation Of Surfacing Tubular Wires, Olah, L. and Mihalkovic, K.VIII-1358-86, Study Of Kinetics Of Chromium And Nickel In Biology Material During A Week Of Arc Welding (MMA, MIG, TIG) Using Chromium-Nickel-Containing Filler Metals. Summary Of Doc VIII-1260-85, Zober, A.VIII-1359-86, Agenda Of IIW Commission VIII For The Annual Assembly In Tokyo 1986 Including Timetable And Documents Concerned, AnonVIII-1360-86, Minutes Of Meeting Of Working Group D Health And Safety In Underwater Welding And Cutting, 26 June 1986, Bergen/Norway, Szelagowski, P.VIII-1361-86, Ordinance On Safety And Health Of Work Under Pressure, Anon.VIII-1362-86, Minutes Of Meetings OF IIW-Commission VIII Health And safety July 15 - 18, 1986 Tokyo (Japan), Grothe, I.VIII-1363-86, Resolutions Of IIW-Commission VIII Health And Safety July 15 - 18, 1986, Tokyo (Japan), Grothe, I.VIII-1364-86, Annual Statement Of Commission VIII Health And Safety, 1986, Grothe, I.VIII-1365-87, 1987 List Of Documents Of IIW-Commission VIII Health And Safety, Anon.VIII-1366-87, AWS Health And Safety Committee Report 1986, Anon.VIII-1367-87, Seeing To The Working Environment, Verkstadsforening, S.VIII-1368-87, Loading Of Arms In Manual Arc Welding, Svabova, K., Vlk, Z. and Malek, B.VIII-1369-87, Mutagenicity Of Metal Ions In Bacteria, Arlauskas, A., Baker, R.S.U., Bonin, A.M., Tandon, R.K., Crisp, P.T. and Ellis, J.VIII-1370-87, Chemical Investigation Of Welding fumes From Hardfacing And HSLA-Steel Electrodes, Tandon, R.K., Crisp, P.T., Ellis, J., Baker, R.S.U. and Chenhall, B.E.VIII-1371-87, Toxic And Genotoxic Action Of Electric-Arc Welding Fumes On Cultured Mammalian Cells, Arlauskas, A., Baker, R.S.U., Tandon, R.K., Crisp, P.T. and Ellis, J.VIII-1372-87, Sampling And In Vitro Test Methods For Welding Fume With Special Reference To Chromium And Nickel - A Review Of Selected IIW Papers, Anon.VIII-1373-87, Topical Hints On Conforming With The Stricter Industrial Safety And Environmental Protection Regulations When Processing Brazing Alloys Containing Cadmium, Mahler, W. and Zimmermann, K.-F.VIII-1375-87, The Assessment Of The Carcinogenicity Of Chromium- And Nickel Containing Welding Fumes Phase I: In Vitro And In Vivo Genotoxicity And Cytotoxicity Studies, Etienne, C.F., Hooftman, R.N., de Raat, W.K., Reuzel, P.G.J., van der Sluis, H.H. and Wilmer, J.W.G.M.VIII-1376-87, Cancer Incidence Among Welders: Effects Of Combined Exposure To ExtremelyLow Frequency Electromagnetic Radiation (ELF) And Welding Fumes, Stern, R.M.VIII-1377-87, Controlling Welding Fumes And Gases, Robinson, T.VIII-1378-87, Carbon Monoxide Concentrations In Welding Habitat During Hyperbaric MMA and TIG Welding, Jakobsen, K., Bolstad, G., Bjorseth, O., Malvik, B. and Jorgensen, G.VIII-1379-87, A Generator For Cadmium Oxide Fume Aerosols, Hochrainer, D.VIII-1380-87, C.E.F.E Warning Label For Welding Consumables, Anon.VIII-1381-87, Minutes Of Meeting Of Working Group D Health And Safety In Underwater Welding And Cutting, 1 April, 1987, Marseille / France, Szelagowski, P.VIII-1382-87, Hyperbaric Occupational Hygiene And Toxicology, Bjorseth, O., Jakobsen, K. and Syversen, T.VIII-1383-87, Proposal - Working Group On Ergonomics, Anon.

Page 132

VIII-1384-87, Agenda Of IIW-Commission VIII For The Annual Assembly In Sofia 1987, Anon.VIII-1385-87, Behaviour Of Cadmium On Brazing - Problems Associated With Fumes -, Nishida, T., Inagaki, M. and Miyamoto, S.VIII-1386-87, Study On Fume Produced By Brazing, Nishida, T., Sasabe, K., Inigaki, M. and Miyamoto, S.VIII-1387-87, State Of The Art Report Underwater Welding And Cutting - Part 6: Health And Safety, Szelagowski, P.VIII-1388-87, Investigation Of Heterogeneity Of Welding Fume Particle Composition By The Method Of X-Ray Photoelectron Spectroscopy, Voitkevich, V.G.VIII-1389-87, State Of Peroxidation Of Lipids In White Rat Tissues As An Index Of Biological Aggressiveness Of Welding Fumes And Gases, Geleskul, Yu.F. and Voitkevich, V.G.VIII-1390-87, Investigation Of Solubility Of Welding Aerosol Solid Constituent, Voitkevich, V.G., Gorban, L.N. and Lukachina, V.V.VIII-1391-87, Minutes Of Meeting Of Working Group B Ventilation, 3 April 1987, Canetti, F.VIII-1392-87, Annual Report Of Working Group B On Ventilation, Canetti, F.VIII-1393-87, A New Technique To Capture Welding Fume At Source, Anon.VIII-1394-87, Agenda Of IIW-Commission VIII For The Annual Assembly In Sofia 1987 Including Timetable And Documents Concerned, Anon.VIII-1395-87, Minutes Of Meeting Of Working Group C Medical And Industrial Hygiene Problems In Welding, 1 April 1987, McMillan, G.H.G.VIII-1396-87, Cases Of Poisonings By Gases And Fumes In Welding And Thermal Cutting, Yamaguchi, H.VIII-1397-87, Minutes Of Meeting Of Working Group A Publications On Health And Safety In Welding, 2 April 1987, Tinkler, M.J.VIII-1400-87, Report On National Activities In Health And Safety 1986 / 87, Anon.VIII-1401-87, Questionnaire On Noise In Welding, Anon.VIII-1402-87, Establishing Of A New Working Group K Work Place Design/Etude Du Poste DeTravail, Grothe, I.VIII-1405-88, Are Robots Safe?, Linger, M.VIII-1406-88, Investigation Into The Origin Of Fires During Welding, Cutting And Associated Processes - Temperature, Speed, Size And Heat Content Of Particles Of Slag During ThermalCutting, Holemann, H. and Worpenberg, R.VIII-1407-88, Mortality In Two Cohorts Of Welders Exposed To High- And Low-Levels Of Hexavalent Chromium, Sjogren, B. and Gustavsson, A.VIII-1408-88, Occupational Chronic Exposure To Metals. I. Chromium Exposure Of Stainless Steel Welders - Biological Monitoring, Angerer, J., Amin, W., Heinrich-Ramm, R., Szadkowski,D. and Lehnert, G.VIII-1409-88, Investigations On Renal Impairments Of High Alloy Steel Welders, Zschiesche, W., Emmerling, G., Schaller, K.H. and Weltle, D.VIII-1410-88, Brazing Fume Exposure At Work, Lugscheider, E. and Dietrich, V.VIII-1411-88, Safety Information Sheet No. 2 - Welding Fume, Anon.VIII-1412-88, Safety Information Sheet No. 3 - Contact Lenses And The Welder, Anon.VIII-1413-88, Safety Information Sheet No. 4 - Are Many Fires Caused By Welding?, Anon.VIII-1414-88, Safety Information Sheet No. 5 - Electrical Safety In Arc Welding, Anon.VIII-1415-88, Safety Information Sheet No. 6 - Heart Pacemakers And Welding, Anon.VIII-1416-88, Safety Information Sheet No. 7 - Safety Equipement For Welding - Suppliers And Manufacturers, Anon.

Page 133

VIII-1417-88, Safety Information Sheet No. 8 - Radiation And Welding, Anon.VIII-1418-88, Safety Information Sheet No. 9 - Local Extraction For Welding Fume, Anon.VIII-1419-88, Safety Information Sheet No. 10 - Ozone In Welding: General Notes, Anon.VIII-1420-88, Safety Information Sheet. No. 11 - Chromium In Welding Fume, Anon.VIII-1421-88, Safety Information Sheet No. 12 - The Ionising Radiations Regulations 1985, Anon.VIII-1423-88, Measurement Of Ultraviolet Radiation From Welding Arcs, Okuno, T.VIII-1424-88, Measurement Of Blue-Light Effective Radiance Of Welding Arcs, Okuno, T.VIII-1425-88, Welders' Pneumoconiosis: Tissue Elemental Microanalysis By Energy Dispersive X Ray Analysis, Funahashi, A., Schlueter, D.P., Pintar, K., Bemis, E.L. and Siegesmund, K.A.VIII-1426-88, Investigations On The Quantitative Determination Of Nickel And Chromium In Human Lung Tissue - Industrial Medical, Toxicological, And Occupational Medial Expertise Aspects, Raithel, H.J., Schaller, K.H., Reith, A., Svenes, K.B. and Valentin, H.VIII-1427-88, Renal Function Of Chrome-Plating Workers And Welders, Verschoor, M.A., Bragt, P.C., Herber, R.F.M., Zielhuis, R.L. and Zwennis, W.C.M.VIII-1428-88, Uptake And Urinary Excretion Of Aluminum Among Welders, Sjogren, B., Elinder, C.-G., Lidums, V. and Chang, G.VIII-1429-88, The Assessment Of Carcinogenic Risks Of Exposures To Nickel And Chromium In Welding Fumes, Stern, R.M.VIII-1430-88, Recording And Reducing Workplace Contamination Caused By Soft Soldering InThe Electrical Industry, Sidhu, A., Moch, P., Podewils, G. and Schliephake, D.VIII-1431-88, Minutes Of Meeting Of Working Group B Ventilation, 24 February 1988, Grothe, I.VIII-1432-88, Minutes Of Meeting Of Working Group C Medical And Industrial Hygiene Problems In Welding, 22 February 1988, McMillan, G.H.G.VIII-1433-88, Agenda Of IIW Commission VIII For The Annual Assembly In Vienna 1988, Anon.VIII-1434-88, Hygienic Characteristics Of Czechoslovak Consumables For Welding In Nuclear Power Engineering, Olah, L.VIII-1435-88, The Hygienic And Safety Conditions Of Vibration Of Weldments, Horny, S. and Vranka, J.VIII-1436-88, Fires Resulting For The Use Of Welding In Czechoslovakia, Halen, S.VIII-1437-88, Plastic Materials And Fire Prevention, Kosik, M. and Talapkova, D.VIII-1438-88, Fume Information Sheet On Ventilation And Respiratory Protection For Welding (Draft), Anon.VIII-1441-88, Fume Information Sheets For Welders (Part I), Anon.VIII-1442-88, Minutes Of Meeting Of Working Group A Publications On Health And Safety In Welding, 23 February 1988, Tinkler, M.J.VIII-1443-88, Emission Of Gaseous Pollutants During GTA Welding Of Yorcalbro Brass, Sipek, L.VIII-1444-88, Minutes Of Meeting Of Working Group D Health And Safety In Underwater Welding And Cutting, 20 May 1988, Szelagowski, P.VIII-1445-88, High Hydrostatic Pressure And Chromate-Induced Effects On Cell Cycle Kinetics, Jenssen, J. and Syversen, T.VIII-1446-88, High Hydrostatic Pressure Potentiation Of The Toxic Effects Of Chromate In CellCulture, Syversen, T. and Jenssen, J.

Page 134

VIII-1447-88, Carboxyhemoglobin In Rats Exposed To Carbon Monoxide At 41 ATA, Bolstad, G., Lindrup, A.G., Brubakk, A.O. and Martini, S.VIII-1449-88, Rapport Annuel De Groupe De Travail A Publications Au Sujet De La Hygiene EtSecurite Dans Le Soudage, Beaufils, D.VIII-1450-88, Report On National Activities In Health And Safety 1987/88, Anon.VIII-1450-89, Mechanised Generation Of Welding Fumes, Anon.VIII-1451-88, On The Problem Of Welding Fumes Biological Effect Prediction, Voitkevich, V.G., Yavdoshchin, I.R., Glushchenko, O.B. and Geleskul, Yu.F.VIII-1452-88, Minutes On Meetings Of IIW-Commission VIII Health And Safety, July 05 - 08, 1988, Vienna (Austria), Grothe, I.VIII-1453-88, Outline Of Working Group K Work Place Design, Kadefors, R.VIII-1454-88, Proces-Verbal De La Reunion Intermediare Du Groupe De Travail A Publications Au Sujet De La Hygiene Et Securite Dans Le Soudage Du 6 Juillet 1988 A Vienne, Beaufils, D.VIII-1456-89, 1989 List Of Documents Of Commission VIII Health And Safety, Anon.VIII-1457-89, Agenda Of Commission VIII For The Annual Assembly In Helsinki 1989, Anon.VIII-1458-89, Fume Emission Characteristics Of Stainless Steel MIG/MAG (GMA) Welding - Final Report, Moreton, J. and Spiller, K.R.VIII-1459-89, The Case For Standardization Of Tests For Welding Fume Emission Rate And Chemical Composition Determination, Moreton, J.VIII-1461-89, Safety In Welding, Cutting And Allied Processes, Anon.VIII-1462-89, Measuring Methods To Determine The Concentration Of Toxic Gases At The Working Place, Press, H.VIII-1464-89, Complex Hygienic Evaluation Of Welding Consumables, Mackova, H. and Kosnac, L.VIII-1466-89, The Future Of Occupational Hygiene - An International Overview, Gerhardsson, G.VIII-1467-89, Welders' View Of Occupational Risks And Risk Taking, Honkasalo, A.VIII-1468-89, Fume Information Sheets For Welders (Part II), Anon.VIII-1469-89, Study On Fume Of Cr-Mn-Ni Austenitic Filler Metals, Araki, Y.VIII-1470-89, Minutes Of Meeting Of Working Group B Ventilation, 10 March, 1989, Back, J.VIII-1471-89, High-Powered CO2 Lasers And Safety, Honkasalo, A., Laitinen, H., Lindroos, L. and Welling, I.VIII-1473-89, Minutes Of Meeting Of Working Group F Sampling And Analysis Of Welding Fumes And Gases, 10 March, 1989, Svensson, L.VIII-1474-89, Minutes Of Meeting Of Working Group K Workplace Design, 10 March, 1989, Kadefors, R.VIII-1475-89, Shoulder Pain In Industry: An Epidemiological Study On Welders, Herberts, P., Kadefors, R., Andersson, G. and Petersen, I.VIII-1476-89, Shoulder Pain And Heavy Manual Labor, Herberts, P., Kadefors, R., Hogfors, C. and Sigholm, G.VIII-1478-89, Proces-Verbal De La Reunion Du Groupe De Travail A Publications Sur L'Hygiene Et La Securite En Soudage, 8 Mars, 1989 / Minutes Of Meeting Of Working Group A publications On Health And Safety In Welding, 10 March, 1989, Beaufils, D. and Tinkler, M.VIII-1479-89, Protection Des Travailleurs Contre Le Bruit, Anon.VIII-1480-89, Valeurs Limites D'Exposition Professionnelle Aux Substances Dangereuses En France, Anon.

Page 135

VIII-1481-89, Evaluation Des Effects Respiratoires Des Fumees De Soudage: Resultats D'UneEtude Portant Sur 986 Sujets De L'Industrie Metallurgique, Cabal, C., Faucon, D. and Lecaignard, J.VIII-1482-89, Etats Des Textes Reglementaires (Octobre 1988), Mahieu, J.C.VIII-1483-89, Agenda For Intermediate Meeting Of Working Group A Publications On Health And Safety In Welding, Helsinki 1989, Beaufils, D.VIII-1484-89, Cause Specific Mortality Among Workers Exposed To Welding Fumes And Gases: A Historical Prospective Study, Merlo, F., Constantini, M. and Doria, M.VIII-1485-89, Ozone In Arc Welding, Smars, E. and Sipek, L.VIII-1488-89, Hydrogen Determination Of Test Welds Made In Unmanned Hyperbaric WeldingSimulators - Supplement To ISO 3690 - 4th Draft, Anon.VIII-1489-89, Hydrogen Determination Of Test Welds Made In Manned Hyperbaric Simulators Or In Manned Subsea Hyperbaric Habitats -Supplement To ISO 3690 -3rd Draft, Anon.VIII-1491-89, Chromium (VI) In Welding Aerosols, Olah, L. and Mackova, H.VIII-1492-89, Hearing Loss On Welders And Noise Exposure, Yamazaki, S., Yagami, T. and Yamaguchi, H.VIII-1493-89, Agenda Of IIW-Commission VIII For The Assembly In Helsinki 1989 Including Timetable And Documents Concerned, Anon.VIII-1495-89, Threshold Limit Values From Some IIW Member Countries, Svensson, L.VIII-1496-89, Thermal Degradation Products Of Steel Protective Paints, Henriks-Eckerman, M.L., Engstrom, B. and Anas, E.VIII-1497-89, Exposure To Paint Degradation Products When Welding, Flame Cutting Or Straightening Painted Steel, Engstrom, B., Henriks-Eckerman, M.-L. and Anas, E.VIII-1499-89, Welding And Ergonomy, Visontay, I.VIII-1500-89, Sources And Possible Ways Of Lowering Fume Generation In Welding Low-Alloy Steels, Yavdoshchin, I.R., Voitkevich, V.G. and Voroshilo, V.S.VIII-1501-89, Annual Report Of Working Group G Emission And Control Of Optical And Thermal Radiation In Welding, Kohmoto, K.VIII-1502-89, Minutes Of Meeting Of IIW-Commission VIII Health And Safety, September 05 - 08, 1989, Helsinki (Finland), Grothe, I.VIII-1503-89, Breathing Zone Values Of Welding Fumes With Arc Welding Under Distinct Workplace Conditions - Correlation To The Corresponding Emission Data, Farwer, A.VIII-1505-89, A New Technique In MMA-Welding, Blomberg, G.VIII-1506-89, Report On National Activities In Health And Safety 1988/89, Anon.VIII-1507-89, Annual Statement Of Commission VIII Health And Safety,1989, Grothe, I.VIII-1509-90, 1990 List Of Documents Of Commission VIII Health And Safety, Anon.VIII-1513-90, Proces Verbal De La Reunion Du Groupe De Travail A Publications Sur L'Hygiene Et La Securite En Soudage, Helsinki, 6 Septembre 1989, Beaufils, D.VIII-1516-90, Respiratory Symptoms And Pulmonary Functions In Different Groups Of Welders, Swaminathan, V. and Sivaramakrishnan, M.VIII-1517-90, A Comparative Study Of Pulmonary Functions And Respiratory Morbidity AmongEx-Welders And Non-Welding Controls, Chandrasekaran, N.K.VIII-1518-90, Investigation Of The Eye In Welders, Raman, R.VIII-1519-90, Report On The Questionnaire On Noise In Welding, Kennebeck, M.E.VIII-1521-90, Minutes Of Meeting Of Working Group C Medical And Industrial Hygiene Problems In Welding, 05.September, 1989, Zschiesche, W.VIII-1522-90, Minutes Of Meeting Of Working Group F Sampling And Analysis Of Welding

Page 136

Fumes And Gases, 07. September, 1989, Svensson, L.VIII-1523-90, Welder Eye Injuries, Reesal, M.R., Dufresne, R.M., Suggetta, D. and Alleyne, B.C.VIII-1524-90, Announcement: International Exhibit Of Health And Safety Information For The Welder. International Institute Of Welding Annual Assembly, Montreal, Canada July 23-26, 1990, Tinkler, M.J.VIII-1554-90, Methods Of Measurement For Gas Concentration In Welding Environment (JIS Z 3952-1990), Yamaguchi, H.VIII-1555-90, Annual Report 1989/90 Of Working Group G Emission And Control Of Optical And Thermal Radiation In Welding, Kohmoto, K.VIII-1556-90, Fume Information Sheets For Welders (Part III), Anon.VIII-1557-90, Minutes Of Meeting Of Working Group F Sampling And Analysis Of Welding Fumes And Gases, 09. February, 1990, Svensson, L.VIII-1558-90, Proposed Welding Fume Seminar At Strasbourg (France), April 1991, Anon.VIII-1559-90, International Exhibit: Health And Safety Information For The Welder, Anon.VIII-1560-90, Minutes Of Meeting Of IIW-Commission VIII Health And Safety, July 23 - 27, 1990, Montreal (Canada), Grothe, I.VIII-1561-90, Report On National Activities In Health And Safety 1989/90, Anon.VIII-1565-91, Reference Workplaces For Manual Welding, Kadefors, R., Laring, J. and Bengtsson, G.VIII-1566-91, As Welders Aren't Made Of Steel..., Anon.VIII-1567-91, Evaluation Of Exposures During The Welding Or Flame-Cutting Of Painted Steel, Engstrom, K., Engstrom, B. and Henriks-Eckerman, M.-L.VIII-1568-91, Semen Quality And Sex Hormones Among Mild Steel And Stainless Steel Welders: A Cross Sectional Study: Bonde, J.P., VIII-1569-91, Semen Quality In Welders Before And After Three Weeks Of Non-Exposure, Bonde, J.P.VIII-1570-91, Assessment Of Exposure To Fume From Welding And Allied Processes, Anon.VIII-1571-91, Proces Verbal De La Reunion Du Group De Travail A Publications Sur L'Hygiene Et La Securite En Soudage, Montreal, 23 Juillet 1990, Beaufils, D.VIII-1572-91, FIF No. 2: Ventilation Et Protection Respiratoire En Soudage, Anon.VIII-1573-91, Statement Relating To Welding Fumes, Marini, F.VIII-1574-91, Allowable Exposure Levels For Some IIW Member Countries, Kosnac, L. and Svensson, L.VIII-1575-91, Productivity, Or Quality Of Work As The Decisive Factor In Marketing Ergonomics? Design Considerations For A New Ergonomic Welding-Table, van der Veen, F. and Regensburg, R.E.VIII-1576-91, Minutes Of Meeting Of Working Group K Work Place Design, 27. July, 1990, Kadefors, R.VIII-1577-91, Agenda Of Commission VIII For The Annual Assembly In The Hague 1991, Anon.VIII-1578-91, CO2- Lasers And Noise Control, Honkasalo, A., Kuronen, J. and Narhi, P.VIII-1579-91, Welding Aerosols: Formation Processes In Gas-Shielded Welding. Estimation Criteria, Recommendations On Improving Working Conditions, Golovatyuk, A.P. and Levchenko, O.G.VIII-1580-91, Presentations On Eye Problems In Welders, Marini, F.VIII-1581-91, Minutes Of Meeting Of Working Group A Publications On Health And Safety In

Page 137

Welding, 14.Februray, 1991, Grothe, I.VIII-1583-91, Fume And Ventilation - Extracts From AWRA-AWI Technical Note 7 - Health & Safety Welding, Anon.VIII-1584-91, Eye Hazards In Welding - Recognition, Evaluation And Control, Kennebeck, M.E.VIII-1585-91, Invitation To The IIW Latin American Regional Welding Congress - 1991 - Quality & Productivity - Rio de Janeiro, Brazil, April 04-10, 1992, Anon.VIII-1586-91, Minutes Of Meeting Of Working Group C Medical And Industrial Hygiene Problems In Welding, 25.July, 1990, Zschiesche, W.VIII-1587-91, Minutes Of Meeting Of Working Group C Medical And Industrial Hygiene Problems In Welding, 15. February, 1991, Zschiesche, W.VIII-1588-91, On The Question Of Milk Drinking Of Welders As A Measure Of Health Protection, Zschiesche, W.VIII-1589-91, A Historical Prospective Study Of European Stainless Steel, Mild Steel, And Shipyard Welders, Simonato, L., Fletcher, A.C., Andersen, A., Anderson, K., Becker, N., Chang-Claude, J., Ferro, G., Gerin, M., Gray, C.N., Hansen, K.S., Kalliomaki, P.-L., Kurppa, K., Langard, S., Merlo, F., Moulin, JJ., Newhouse, M.L., Peto, J., Pukkala, E., Sjogren, B., Winkelmann, R. and Saracci, R.VIII-1590-91, Lung Cancer In Mild Steel Welders, Steenland, J., Beaumont, J. and Elliot, L.VIII-1591-91, Mortality Study Among Workers Producing Ferroalloys And Stainless Steel In France, Moulin, J.J., Portefaix, P., Wild, P., Mur, J.M., Smagghe, G. and Mantout, B.VIII-1593-91, Fertility Among Danish Male Welders, Bonde, J.P., Hansen, K.S. and Levine, R.J.VIII-1594-91, Optical Radiation Hazards Of Laser Welding Processes - Part II: CO2 Laser, Rockwell, R.J. and Moss, C.E.VIII-1595-91, Computer Simulation In The Design Of Local Exhaust Hoods For Shielded MetalArc Welding, Tum Suden, K.D., Flynn, M.R. and Goodman, R.VIII-1596-91, Computer-Aided Ozone Measurements During Gas-Shielded Arc Welding, Farwer, A. and Sroka, U.VIII-1598-91, Etude Et Analyse Des Conditions De Travail Lors De L'Application De Procedes De Soudage Et De Decoupage A L'arc Plasma Des Metaux, Ivanova, Z.VIII-1600-91, Etude Epidemiologique De Mortalite Sur Le Soudage: Enquete Multicentrique Realisee En France, Moulin, J.J., Wild, P. and Toamain, J.P.VIII-1601-91, Guide Pratique De Ventilation - Operations De Soudage A L'Arc, Anon.VIII-1602-91, Minutes Of Working Group K Work Place Design, 13.February, 1991, Kadefors, R.VIII-1603-91, Rapport Annuel 1990/91 Du Groupe De Travail A Publications Sur L'Hygiene Et La Securite En Soudage, Beaufils, D.VIII-1604-91, Seminaire Sur Les Fumees De Soudage - Strasbourg - 8 Et 9 Avril 1991, Beaufils, D.VIII-1605-91, Les Risques Oculaires En Metallurgie, Marini, F.VIII-1606-91, Participation Aux Recentes Enquetes Epidemiologiques (OMS & France) De Mortalite Des Soudeurs, Marini, F.VIII-1607-91, Annual Report 1990/91 Of Working Group G Emission And Control Of Optical And Thermal Radiation In Welding, Kohmoto, K.VIII-1608-91, Statement On The Casual Relationship Between The Exposure To Welding Fume And The Occurrence Of Cancer Amongst Welders, Anon.

Page 138

VIII-1609-91, Minutes Of Meetings Of IIW-Commission VIII Health And Safety, July 02 - 05, 1991, The Hague (Netherlands), Grothe, I.VIII-1611-91, Annual Statement Of Commission VIII Health And Safety, 1991, Grothe, I.VIII-1614-92, Exposure Of Welders To Fumes And Gases In Dutch Industries: Summary Of Results, van der Wal, J.F.VIII-1615-92, Short Communication: Airborne Fiber Levels Associated With The Use Of MMF Brazing Mats During Welding Operations, Waterman, L.S.VIII-1616-92, Safety In Welding, Anon.VIII-1617-92, Effect Of New Kinds Of Devices To Protect The Respiratory Area In Protective Gas Welding, Steinegger, A. and Walti, K.VIII-1618-92, Allowable Workplace Exposure Limits For Some IIW Member Countries, Svensson, L.VIII-1619-92, A Method For Measuring The Capture Efficiency Of Fume-Extracting Welding Guns, Cornu, J.C.VIII-1620-92, Proces Verbal De La Reunion Du Groupe De Travial A, Beaufils, D.VIII-1621-92, Ionisation Of Atmosphere By Welding Processes And Its Effect On Quality Of Working Microclimate, Skalny, J.D., Sobek, V. and Kosnac, L.VIII-1629-92, Eye Pathology - Vision And Welding, Marini, F.VIII-1630-92, Variation Of Degree Of Blue Light Hazardous Damage By The Crystalline Lens Deterioration, Kohmoto, K., Akiyama, J., Mori, L. and Azuma, T.VIII-1631-92, Graceful - The New Ergonomically Designed And Safe Welding Torch Handles, Visontay, I.VIII-1632-92, Safety Leaflets (12), fur Schweisstechnik, D.V.VIII-1633-92, Mechanization And Automation Developments In Shipbuilding, Ohno, I. and Nishiura, L.VIII-1634-92, Exposure To Electromagnetic Fields In Arc Welding, Stuchly, M. and Lecuyer, D.VIII-1635-92, Development And Validation Of A Model To Predict The Metallic Composition OfFlux Cored Arc Welding Fumes, Hewitt, P. and Hirst, A.VIII-1636-92, Chromium And Its Inorganic Compounds: Health And Safety Precautions, Anon.VIII-1637-92, Incidence Of Cancer Among Welders And Other Workers In A Norwegian Shipyard, Melkild, A., Langard, S., Andersen, A. and Tonnessen, J.N.VIII-1638-92, Investigations Of The Frequency Of DNA Strand Breakage And Cross-Linking And Of Sister Chromatid Exchange In The Lymphocytes Of Electric Welders Exposed To Chromium- and Nickel-Containing Fumes, Popp, W., Vahrenholz, C., Schmieding, W., Krewet,E. and Norpoth, K.VIII-1639-92, Neuropsychiatric Symptoms Among Welders Exposed To Neurotoxic Metals, Sjogren, B., Gustavsson, P. and Hogstedt, C.VIII-1640-92, Pulmonary Reactions Caused By Welding-Induced Decomposed Trichloroethylene, Sjogren, B., Plato, N., Plato, N., Alexandersson, R., Eklund, A. and Falkenberg, C.VIII-1641-92, Fever And Respiratory Symptoms After Welding On Painted Steel, Sjogren, B., Backstrom, I., Fryk, G., Jakobsson, R., Milerad, E., Plato, N. and Tornling, G.VIII-1642-92, Minutes Of Intermediate Meeting Of WG F On Sampling And Analysis Of Welding Fume And Gases, 26 February 1992, Svensson, L.VIII-1643-92, Proces Verbal De La Reunion Du Groupe De Travail A; Publications Sur L'Hygiene Et La Securite En Soudage, Nancy, 26 Fevrier 1992, Beaufils, D.VIII-1645-92, Minutes Of Meeting Of WB B On Ventilation, 27 February 1992, Back, J.

Page 139

VIII-1646-92, Notes From Meeting In WG K On Workplace Design, 26 February 1992, Kadefors, R.VIII-1647-92, Hard Metal Interstitial Pulmonary Disease Associated With A Form Of Welding In A Metal Parts Coating Plant, Figueroa, S.VIII-1648-92, Computer-Aided Ozone Computer Measurements During Shielded Arc Welding, Brehme, H., Farwer, A. and Sroka, U.VIII-1649-92, Call For Papers - International Conference On Health And Safety In Welding And Related Processes, Smallbone, C.VIII-1650-92, General Considerations On The Possibility To Evaluate Ozone Emission Data InFume Box With Gas Shielded Electrical Arc Welding, Farwer, A.VIII-1651-92, Ozone And Nitrous Fume Produced During Gas Tungsten Arc Welding, Hilton, D.E., Plumridge, P.N. and Green, J.I.VIII-1652-92, Particulate Fume Generation During Gas Metal Arc And Gas Tungsten Arc Welding, Hilton, D.E., Plumridge, P.N. and Green, J.I.VIII-1653-92, Comments On DVS Leaflets, Jordan, D.VIII-1654-92, Cancer Risk In Arc Welding, Zschiesche, W.VIII-1655-92, Minutes Of The Intermediate Meeting Of WG C Held In The Hague, 3 July 1991,Zschiesche, W.VIII-1656-92, Minutes Of The Intermediate Meeting Of WG C Held In Vandoeuvre, 27 February 1992, Zschiesche, W.VIII-1657-92, Result Of The Radiometric Evaluation Of Material Samples, Kraume, G.VIII-1658-92, Agenda And Timetable For Commission VIII For The Annual Assembly In Madrid, 1992, Kennebeck, M.VIII-1659-92, Activity Report Of Working Group G (June 1991-August 1992), Kohmoto, K.VIII-1661-92, Exposure To Soluble Barium Compounds: An Interventional Study In Arc Welders, Zschiesche, W., Schaller, K.-H. and Weltle, D.VIII-1662-92, Recommendations For Welding Workplace Design: Physical Workload Aspects, Kadefors, R.VIII-1663-92, Welding: Fumes And Gases, Anon.VIII-1664-92, Catalogue Of Risk Factors In Welding Process, Kosnac, L.VIII-1665-92, Olfactory Impairment After Chronic Occupational Cadmium Exposure, Rose, C., Heywood, P.G. and Costanzo, R.VIII-1666-92, Safety Infograms (17), Anon.VIII-1667-92, Assessment Of Thorium Exposure Due To Grinding Of Thoriated Tungsten Electrodes, Sinclair, M. and Thind, K.S.VIII-1668-92, Preventing Eye Injuries Associated With Welding Processes - A Review And Discussion Document For Commission VIII, McMillan, G.VIII-1669-92, Process Verbal De La Reunion Du Groupe De Travail A, Madrid, 10 Septembre 1992, Beaufils, D.VIII-1670-92, Rapport Annuel Du Groupe De Travail A, 1991/1992, Beaufils, D.VIII-1671-92, Notes From Minutes Of WG K, Madrid, 9 Septembre 1992 (Workplace Design), Kadefors, R.VIII-1672-92, Recommendations For Welding Workplace Design: Physical Workload Aspects (REVISED From VIII-1662-93), Kadefors, R.VIII-1673-92, 1992 Report On National Activities (France, Italy, UK, USA), Anon.VIII-1674-93, Loading On The Neck When Welding With Visors, Eklund, J. and Gunnarsson, K.

Page 140

VIII-1675-93, Radioactivity Measurement Of Tungsten Rods Containing Thorium (In Japanese), Saito, H. and Ishida, Y.VIII-1676-93, Safety Leaflets (5), fur Schweisstechnik, D.V.VIII-1677-93, The Visual Function Of The Welder, Marini, F.VIII-1678-93, Iron, Manganese, Copper And Titanium In Welding Fume Dust On Filters For Internal And External Quality Assurance, Anglov, J., Holst, E., Dyg, S. and Christensen, M.VIII-1679-93, A Mortality Study Among Mild Steel And Stainless Steel Welders, Moulin, J., Wild, P., Haguenoer, J.M., Faucon, D., De Gaudemaris, R., Mur, J.M., Mereau, M., Gary, Y., Toamain, J.P., Birembaut, Y., Blanc, M., Debiolles, M.P., Jegaden, D., Laterriere, B., Leonard,M., Marini, F., Massardier, C., Moulin, M., Reure, M., Rigal, L., Robert, G. and Viossat, M.VIII-1680-93, Chemical Composition And Morphology Of Welding Fume Particles And Grinding Dusts, Karlsen, J., Farrants, G., Torgrimsen, T. and Reith, A.VIII-1681-93, Biomonitoring Of Genotoxic Exposure Among Stainless Steel Welders, Knudsen, L., Boisen, T., Christensen, J.M., Jelnes, J.E., Jensen, G.E., Jensen, J.C., Lundgren, K., Lundsteen, C., Pedersen, B., Wassermann, K., Wilhardt, P., Wulf, H.C. and Zebitz, U.VIII-1682-93, Agenda Of Commission VIII For The Annual Assembly In Glasgow, 1993, Kennebeck, M.VIII-1683-93, Notes From Minutes Of WG K, Geneva, 24 March 1993 (Workplace Design), Kadefors, R.VIII-1684-93, Proces Verbal De La Reunion Du Groupe De Travail A, Geneve, 23 Mars 1993, Beaufils, D.VIII-1685-93, Rapport Annuel Du Groupe De Travail A, 1992/1993, Beaufils, D.VIII-1686-93, Activities Nationales - France, 1992/1993, Beaufils, D.VIII-1687-93, Estimation Of Regional Pulmonary Deposition And Exposure For Fumes From SMAW And GMAW Mild And Stainless Steel Consumables, Hewett, P.VIII-1688-93, The Particle Size Distribution, Density, And Specific Surface Area Of Welding Fumes From SMAW And GMAW Mild And Stainless Steel Consumables, Hewett, P.VIII-1689-93, A Historical Prospective Study Of European Stainless Steel, Mild Steel, And Shipyard Welders, Simonato, L., Fletcher, A.C., Andersen, A., Anderson, K., Becker, N., Chang-Claude, J., Ferro, G., Gerin, M., Gray, C.N., Hansen, K.S., Kalliomaki, P.-L., Kurppa, K., Langard, S., Merlo, F., Moulin, J.J., Newhouse, M.L., Peto, J., Pukkala, E., Sjogren, B., Wild, P., Winkelmann, R. and Saracci, R.VIII-1690-92, Minutes Of Meeting, Kennebeck, M.VIII-1690-93, Risque De Cancer Chez Les Soudeurs - Revue Bibliographique Des Enquetes Epidemiologiques, Moulin, J. and Diebold, F.VIII-1691-93, Etude Prospective Historique De La Mortalite Et De L'Incidence Des Cancers Dans Une Cohorte De Soudeurs Europeens, Anon.VIII-1692-93, Chlorinated Solvents, Welding And Pulmonary Edema (Letter), Selden, A. and Sundell, L.VIII-1693-93, Proposal Of Dose-Response Relationship Between Aluminium Welding Fume Exposure And Effect On The Central Nervous System, Sjogren, B. and Elinder, C.G.VIII-1694-93, Aluminium (Criteria Document From The Nordic Expert Group 1992), Sjogren, B.VIII-1695-93, Welding Fumes - Toxicity, Properties, Formation (Book Abstract And Contents), Voitkevich, V.VIII-1696-93, Agenda And Timetable For Commission VIII For The Annual Assembly In Glasgow, 1993, Kennebeck, M.

Page 141

VIII-1697-93, Short-Term Respiratory Function Changes In Relation To Workshift Welding Fume Exposures, Akbar-Khanzadeh, F.VIII-1698-93, Relationship Between Various Chromium Compounds And Some Other Elements In Fumes From Manual Metal Arc Stainless Steel Welding, Matczak, W. and Chmielnicka, J.VIII-1699-93, Proposal For Statement From Commission VIII: Welding With Nonconsumable Electrodes - Thoriated Tungsten Electrodes, Beaufils, D.VIII-1700-93, Activity Report Of Working Group G (Sept. 1992 - July 1993), Kohmoto, K.VIII-1701-93, A Study Of Thorium Exposure During Tungsten Inert Gas Welding In An Airline Engineering Population, McElearney, N. and Irvine, D.VIII-1702-93, Statement Of Commission VIII On Health Aspects In The Use Of Thoriated Tungsten Electrodes, Anon.VIII-1703-93, A Systems Approach To The Control Of Welding Fumes At Source, Hewitt, P.VIII-1704-93, Minutes Of The Intermediate Meeting Of WG C Held In Madrid, 8-9 September 1992, Zschiesche, W.VIII-1705-93, Minutes Of The Intermediate Meeting Of WG C Held In Geneva, 23 March 1993,Zschiesche, W.VIII-1706-93, Urinary N-Acetyl-Beta-D-Glucosaminadase And Beta-Aminoisobutyric Acid In Workers Occupationally Exposed To Metals Such As Chromium, Nickel, And Iron, Tomokuni, K.VIII-1707-93, Medical Wastage In Shipyard Welders: A Forty-Year Historical Cohort Study, Wanders, S., Zielhuis, G.A., Vreuls, H.J.H. and Zielhuis, R.L.VIII-1708-93, Minutes Of Meetings Of IIW Commission VIII, August 31-September 2, 1993, Glasgow, Scotland, Kennebeck, M.VIII-1709-94, Retrospective Estimation Of Exposure To Welding Fume, Gray, C.N. and Gerin, M.VIII-1710-94, Proces Verbal De La Reunion Du Groupe De Travail A, Glasgow, 1 Septembre 1993, Beaufils, D.VIII-1711-94, Summary Of Decisions Taken At Glasgow By WG A Regarding Health And Safety Sheets, Beaufils, D.VIII-1712-94, Abstracts Of The Navy Seminar On Welding Fumes, Beaufils, D.VIII-1713-94, Asthma Related To Occupational And Ambient Air Pollutants In Nonsmokers, Greer, J.R., Abbey, D.E. and Burchette, R.J.VIII-1715-94, The Respiratory Health Of Welders, Sferlazza, S. and Beckett, W.S.VIII-1716-94, Actualities Mondiales En Hygiene Et Securite Du Soudage, Marini, F.VIII-1717-94, 24th Congress Of The International Commission On Occupational Health - Program And Abstracts, Anon.VIII-1718-94, Les Lasers Au Laboratoire - Guide Sommaire De Securite, Anon.VIII-1719-94, A Possibility To Standardize Measurements Of Ozone Risk Potential During Arc Welding Independent Of Workplace Conditions, Farwer, A.VIII-1720-94, Methods For Chemical Analysis Of Elements In Welding Fumes - JIS Z 3920 (1991), Anon.VIII-1721-94, Activity In Hungary In Health And Safety (1990-1993), Visontay, I.VIII-1722-94, Lead Exposure In A Petroleum Refinery During Maintenance And Repair Activity, Booher, L. and Zampello, C.VIII-1723-94, Welding Injuries, Naherne, G.VIII-1724-94, Welding And Musculoskeletal Disease: A Review, Kadefors, R.

Page 142

VIII-1725-94, A Model For Assessment And Design Of Workplace For Manual Welding, Kadefors, R.VIII-1726-94, Environmental Problems: The Aging Of The Workforce And Efforts To Attract Young People Into The Industry Through Mechanization And Automation, Boekholt, R.VIII-1727-94, Fatal Cadmium-Induced Pneumonitis, Seidal, K., Jorgensen, N., Elinder, C.-G., Sjogren, B. and Vahter, M.VIII-1728-94, Safety In Welding And Allied Processes. Part 3: Control Of Fume (Draft Australian Standard), Anon.VIII-1729-94, Hearing Conservation In Fabrication Shops, Rodgers, L.VIII-1730-94, Measurement Of Ambient Ozone Using A Nitrite-Coated Filter, Koutrakis, P., Wolfson, J.M., Bunyaviroch, A., Froehlich, S.E., Hirano, K. and Mulik, J.D.VIII-1731-94, Investigation On Fume Size Distribution In Arc Welding With Acid Electrode, Shi,Y., Yang, S., Xiong, Y. and Xiao, S.VIII-1732-94, Study On JNL-B Welding-Dust Treater, Cao, B. and Ren, J.VIII-1733-94, The Study Of The Influence Of Arc Welding Dust On Welder's Lung Function, Jhang, Z.VIII-1734-94, Reducing Ozone And Ultraviolet Emissions From GTA Welding, Simpson, P., Stares, I.J. and Richardson, I.M.VIII-1735-94, Primary Liver Cancer And Occupational Exposure, Kauppinen, T., Riala, R., Seitsamo, J. and Hernberg, S.VIII-1736-94, Adverse Pregnancy Outcome And Childhood Malignancy With Reference To Paternal Welding Exposure, Bonde, J., Olsen, J.H. and Hansen, K.S.VIII-1737-94, Proces Verbal De La Reunion Du Groupe De Travail A, Berlin, 20 Avril 1994, Beaufils, D.VIII-1738-94, Rapport Annuel Du Groupe De Travail A, 1993/1994, Beaufils, D.VIII-1739-94, Health Surveillance Of Welders, Those In Similar Trades, Their Assistants And Neighbourhood Workers, McMillan, G.VIII-1740-94, Odorization Of Oxygen, Smars, E., Engstrom, B., Grothe, I. and van der Poel, M.VIII-1741-94, Agenda And Timetable For Commission VIII At The IIW Annual Assembly Beijing, 1994, Anon.VIII-1742-94, Semen Quality And Sex Hormones Among Mild Steel And Stainless Steel Welders: A Cross Sectional Study, Bonde, J.VIII-1743-94, Semen Quality In Welders Before And After Three Weeks Of Non-Exposure, Bonde, J.VIII-1744-94, Subfertility In Relation To Welding, Bonde, J.VIII-1745-94, Fertility Among Danish Male Welders, Bonde, J.VIII-1746-94, The Role Of Occupational Hygiene In Exposure Assessment By Biological Indices, Hewitt, P. and Sanderson, J.VIII-1747-94, Health And Safety - A Welding Review, Anon.VIII-1748-94, Exposure To Stainless Steel Welding Fumes And Lung Cancer: A Meta-Analysis, Sjogren, B., Hansen, K.S., Kjuus, H. and Persson, P.-G.VIII-1749-94, Notes From Meeting Of Working Group K (Workplace Design), Kadefors, R.VIII-1750-94, Transient Changes In The Pulmonary Function Of Welders: A Cross Sectional Study Of Monday Peak Expiratory Flow, Donoghue, A.M., Glass, W.I. and Herbison, G.P.VIII-1751-94, What's Causing The Worldwide Rise In Asthma?, Holgate, S.VIII-1752-94, Chronic Interstitial Lung Disease In A Welder Of Galvanized Steel, Glass, W., Taylor, D.R. and Donoghue, A.M.

Page 143

VIII-1753-94, Biological Monitoring Of Workers Exposed To Cobalt Metal, Salt, Oxides, And Hard Metal Dust, Lison, D., Buchet, J.-P., Swennen, B., Molders, J. and Lauwerys, R.VIII-1754-94, Skin Disorders Among Hand Solders In The Electronic Industry, Koh, D., Lee, H.S., Chia, H.P. and Phoon, W.H.VIII-1755-95, Minutes Of Meetings Of IIW Commission VIII, 6-8 September 1994, Beijing, Peoples Republic Of China, Kennebeck, M.VIII-1756-95, Commission VIII Annual Report Of The Chairman, Kennebeck, M.VIII-1757-95, Minutes Of Intermediate Meeting Of WG A On Publications 23 January 1995, Beaufils, D.VIII-1759-95, Notes From Meeting In Working Group K (Workplace Design), IIS, Roissy, France 23 January 1995, Kadefors, R.VIII-1760-95, Agenda And Timetable For Commission VIII At The IIW Annual Assembly Stockholm, 1995, Anon.VIII-1762-95, Minutes Of Meeting, Kennebeck, M.VIII-1762-99, List Of Documents, Anon.VIII-1763-95, Transparent Welding Curtains For Arc Welding Processes, Yamaguchi, H.VIII-1764-95, Activity Report Of Working Group G (August 1994-May 1995), Kohmoto, K.VIII-1764-99, Final Agenda For 1999 Annual Assembly In Lisbon, Anon.VIII-1765-95, Annual Report Of Working Group A (1995), Beaufils, D.VIII-1766-95, Chemical And Physical Forms Of Cr And Ni In Welding Fumes, Hewitt, P.VIII-1767-95, Does Welding Stainless Steel Cause Cancer?, Marini, F.VIII-1768-95, Role Of Chemical Species And Exposure Characteristics In Cancer Among Persons Occupationally Exposed To Chromium Compounds, Langard, S.VIII-1769-95, Nickel-Related Cancer In Welders, Langard, S.VIII-1770-95, Control Of Risks Of Welding, Cutting Or Burning In Confined Spaces, McMillan, G.VIII-1771-95, Storage And Use Of Thoriated Tungsten Electrodes, Anon.VIII-1772-95, Assessment Of Risk Of Lung Cancer Among Mild Steel And Stainless Steel Welders, Moulin, J.VIII-1773-95, Emission Of Fume, Nitrogen Oxides And Noise In Plasma Cutting Of Stainless And Mild Steel, Bromsen, B.VIII-1774-95, National Activities In France 1994, Beaufils, D.VIII-1775-95, Ventilation: Technical And Administrative Solutions, Cornu, J.VIII-1776-95, Minutes Of Intermediate Meeting Of WG A On Publications 15 June 1995, Beaufils, D.VIII-1777-95, Measurements Of Air Concentrations Of Thorium During Grinding And Welding Operations Using Thoriated Tungsten Electrodes, Crim, E. and Bradley, T.D.VIII-1780-96, Annual Report Of Commission VIII For 1995, Anon.VIII-1782-96, Thorium Free Electrodes From Welding And Cutting Engineering, Resch, J. and Leichtfried, G.VIII-1783-96, Modern Work Organisation Demands Decentralised Technical Solutions, Nonas,K. and Gustafsson, B.VIII-1784-96, The Operator's Computer - A Decentralized Tool For Building An Efficient Decentralized Organisation, Gustafsson, B. and Nonas, K.VIII-1785-96, Emmission Of Fumes And Nitrogen Oxides From Plasma Cutting Of Stainless Steel, Lillienberg, L. and von Bromssen, B.VIII-1786-96, Literature Review Update On Nickel Containing Welding Fumes (1988 To

Page 144

Mid-1994), Naherne, G.VIII-1787-96, Behaviour Of Cadmium In Brazing, Nishida, T., Kimura, K. and Inagaki, M.VIII-1788-96, Soft Tissue Injury In Resistance Welding, Shanahan, E. and Hanley, S.D.VIII-1789-96, Electromagnetic Field Exposure And Cancer: A Review Of Epidemiologic Evidence, Heath, C.VIII-1790-96, Minutes Of Intermediate Meeting Of WG A On Publications, Basel, 5 March 1996, Kadefors, R.VIII-1792-96, Exposure To Airborne Metals In The Manufacture And Maintenance Of Hard Metal And Stellite Blades, Linnainmaa, M., Kangas, J. and Kalliokoski, P.VIII-1793-96, Inorganic Particles In The Lungs Of Five Aluminum Smelter Workers With Pleuro-Pulmonary Cancer, Dufresne, A., Loosereewanich, P., Armstrong, B., Theriault, G. andBegin, R.VIII-1794-96, Impact Of Recent And Anticipated Changes In Airborne Emission Exposure Limits On Shipyard Workers, Anon.VIII-1795-96, Document Numbering System, Anon.VIII-1796-96, IIW Information Sheet On Welding And Cutting On Containers Already Used, Anon.VIII-1797-96, Report Of The Secretariat For ISO/TC 44/SC 9, Anon.VIII-1798-96, Agenda And Timetable For Commission VIII At The IIW Annual Assembly Budapest, 1996, Anon.VIII-1799-97, Chromium And Nickel In Welding And Allied Processes Some Important Aspects, Spiegal-Ciobanu, V.-E.VIII-1800-97, Handling Of Thoriated, Non-Consumable Electrodes (Tungsten Electrodes Containing Thorium Oxide) In Tungsten Inert Gas (TIG) Welding, Spiegal-Ciobanu, Ludwig, Schwa(, Seitz, Schumann and Siekmann.VIII-1801-97, Reduction Of Hexavalent Chromium Concentration In Fumes From Metal Cored Arc Welding By Addition Of Reactive Metals, Dennis, J.H., French, M.J., Hewitt, P.J., Mortazavi, S.B. and Redding, C.A.J.VIII-1802-97, Minutes Of The Intermediate Meeting Of WG C Held In Stockholm, 16 June 1995, Zschiesche, W.VIII-1803-97, Incidence Of Cancer Among Norwegian Boiler Welders, Danielsen, E., Langard, S. and Andersen, A.VIII-1804-97, Environmental Aspects Of Fume In Air And Water, Brown, K.L.VIII-1805-97, Emission Of Fumes And Nitrogen Oxides From Plasma Cutting Of Stainless Steel, Lillienberg, L.VIII-1805-99, Annual Report Lisbon 1999, Maddox, S.J.VIII-1806-97, Minutes Of Meetings Of IIW Commission VIII, 3-5 September 1996, Budapest, Hungary, Kennebeck, M.VIII-1806-99, List Of Members Of The Commission, Anon.VIII-1807-97, Welding Workplace 2000, Boekholt, R.VIII-1808-97, Emission Generated During Laser Cutting And Safety Precautions, Haferkamp, H., Bach, Fr.-W., Goede, M., Puster, T. and Seebaum, D.VIII-1808-99, Working Programme 1999-2000, Anon.VIII-1809-97, IIW Information Sheet On Welding And Cutting On Containers Already Used, Anon.VIII-1809-99, Minutes Of 1999 Annual Assembly In Lisbon, Anon.VIII-1810-97, Annual Report Of Working Group A (1996), Beaufils, D.

Page 145

VIII-1810-99, Chairman's Report, Maddox, S.J.VIII-1811-00, Fatigue In Steel Structures Under Random Loading, Agerskov, H.VIII-1811-97, Minutes Of Intermediate Meeting Of WG A On Publications, Budapest, 5 September 1996, Beaufils, D.VIII-1812-97, Hazardous Substances In Welding And Allied Processes, Spiegal-Ciobanu, V.-E.VIII-1813-97, Airway Reactivity In Welders: A Controlled Prospective Cohort Study, Beckett, W.S., Pace, P.E., Sferlazza, S.J., Perlman, G.D., Chen, A.H. and Xu, X.P.VIII-1814-97, Evaluation Of The Utility Of Spirometry In Regional Public Health Screening Program For Workers Exposed To Welding Fumes, Rossignol, M., Seguin, P. and DeGuire, L.VIII-1817-97, Personal Ultraviolet Radiation Exposure Of Workers In A Welding Environment, Tenkate, T. and Collins, M.J.VIII-1818-97, Hot Work In Sweden, Engblom, G.VIII-1819-97, Engineering Control Of Occupational Exposure To Welding Fume By Process Modification, Mortazavi, S.VIII-1820-97, Minutes Of Intermediate Meeting Of WG A On Publications, Budapest, 5 September 1996, Beaufils, D.VIII-1821-97, Annual Report Of WG A, Beaufils, D.VIII-1822-00, Analysis Of Welded Structures With Failed And Non-Failed Welds Based On Maximum Likelihood, Marquis, G. and Mikkola, T.VIII-1822-87, National Activities In France, Beaufils, D.VIII-1823-87, Statement On Welding And Cutting Containers, Anon.VIII-1824-87, Agenda Of Commission VIII For The Annual Assembly San Francisco, 1997, Kennebeck, M.VIII-1825-00, Doubled Fatigue Strength Of Box Welds By Using Low Transformation Temperature Welding Material, Ohta, A., Suzuki, N. and Maeda, Y.VIII-1825-87, Minutes Of Meeting, Kennebeck, M.VIII-1826-98, Minutes Of Working Group C Meetings: Budapest 1997 And Alverstoke 1997, Zschiesche, W.VIII-1827-98, Annual Report Of Working group G (1997), Komoto, K.VIII-1828-98, Minutes Of Working Group F Meetings (1997), Brown, K.VIII-1829-98, IVF-Skrift 97806. Emissions In Smoke And To Water, Including Hexavalent Chromium, From Plasma Cutting Of Stainless Steel, Lillienberg, L. and von Bromssen, B.VIII-1830-98, Exposure To Ultraviolet Radiation And Ozone During Aluminium Welding, Hietanen, M., Engstrom, B., Kauhaniemi, P. and Makinen, H.VIII-1831-98, Prevention Of Occupational Diseases Of Cast Iron Welders, Metlitsky, V.A., Gorban, L.N., Lubyano, I.P., Kucheruk, T.K. and Ryazanov, A.V.VIII-1832-98, German-Norwegian Research Project - Investigations Of The Health Risk For Stainless Steel Welders And Other Persons Exposed To Chromium And Nickel In Their Work - Final Report, Langard, S., Reith, A. and Raithel, H.J.VIII-1833-98, Mortality Among Welders Exposed To High And To Low Levels Of Hexavalent Chromium And Followed For More Than 20 Years, Milatou-Smith, R., Gustavsson, A. and Sjogren, B.VIII-1834-98, Metal Fume Fever: Characterisation Of Clinical And Plasma IL-6 Responses In Controlled Human Exposures To Zinc Oxide Fume At And Below The Threshold Limit Value, Fine, J.M., Gordon, T., Chen, L.G., Kinney, P., Falcone, G. and Beckett, W.S.VIII-1835-98, Stepwise Health Surveillance For Bronchial Irritability Syndrome In Workers At

Page 146

Risk Of Occupational Respiratory Disease, Post, W.K., Venables, K.M., Ross, D., Cullinan, P.,Heederik, D. and Burdof, A.VIII-1836-98, Chronic Bronchitis, Work Related Respiratory Symptoms And Pulmonary Function In Welders In New Zealand, Bradshaw, L.M., Fishwick, D., Slater, T. and Pearce, N.VIII-1837-98, Respiratory Health Of Workers Exposed To Low Levels Of Chromium In Stainless Steel Production, Huvinen, M., Uitti, J., Zitting, A., Roto, P., Virkola, K., Kuikka, P., Pekka, L. and Aitio, A.VIII-1838-98, Welding Workplace After 2000 Status Report January 1998, Boekholt, R.VIII-1839-98, Notes From Meeting In Working Group K, Workplace Design March 1997, Kadefors, R.VIII-1840-98, Occupational Exposure To Dust: Inflammation And Ischaemic Heart Disease, Sjogren, B.VIII-1841-98, Activities In Hungary In The Field Of Health And Safety In Welding, Visontay, I.VIII-1842-98, Future Aims, Structure And Function Of Commission VIII- Proposals From The Intermediate Meeting In Rome April 1998, McMillan, G.H.G.VIII-1843-98, Minutes Of Intermediate Meeting Of Working Group C In San Francisco, July 1997, Zschiesche, W.VIII-1844-98, Minutes Of Intermediate Meeting Of Working Group C In Rome, April 1998, McMillan, G.H.H.VIII-1845-98, Commission Statement On The Question Of Health Hazards By ElectromagneticFields - Second Draft, Zschiesche, W.VIII-1846-98, Occupational Hygiene At Welding Operations In Russian Shipbuilding And Ship Repair, Koryukaev, Y.S., Gorbach, V.D. and Safiulin, N.S.VIII-1847-98, Safety Of Labour And Environmental Protection As Factors Taken Into Account When Planning And Applying Welding And Cutting Processes In Russian Shipbuilding, Gorbach, V.D., Koryukaev, Y.S., Safiulin, N.S. and Stegantsev, V.P.VIII-1848-98, Factors Influencing Personal Magnetic Field Exposure: Preliminary Results For Power Utility And Office Workers, Semple, S. and Cherrie, J.W.VIII-1849-98, Prognostic Factors For Musculoskeletal Sickness Absence And Return To Work Among Welder And Metal Workers, Burdof, A., Naaktgeboren, B. and Post, W.VIII-1850-98, Respiratory Symptoms And Pulmonary Function Among Stainless Steel Welders, Sobaszek, A., Edme, J.L., Boulenguez, C., Shirali, P., Mereau, M., Robin, H. and Haguenoer, J.M.VIII-1851-98, Lung Cancer Mortality In Nickel/Chromium Platers 1946-95, Sorohan, T., Burges, D.C.L., Hamilton, L. and Harrington, J.M.VIII-1862-99, Minutes Of IW Commission VIII Intermediate Meeting 13 and 14 Jan 99, Hedrick, S.VIII-1863-99, Cancer Mortality Among Arc Welders Exposed To Fumes Containing Chromium And Nickel, Becker, N.VIII-1864-99, Two Year Follow-Up Of Pulmonary Function Values Among Welders In New Zealand (Published In Occup Environ Med 56.5, 1999), Erkinjuntii-Pekkanen, R., Slater, T., Cheng, S., Fishwick, D., Bradshaw, L., Kimbell-Dunn, M., Dronfield, L. and Pearce, N.VIII-1865-99, Occupational Risk Factors Of Lung Cancer: A Hospital Based Case-Study (Published In Occup Environ Med 56.5, 1999), Droste, H.J., Weyler, J.J., Van Meerbeeck, J.P., Vermeire, P.A. and Van Sprundel, M.P.VIII-1867-99, AWS Safety And Health Fact Sheet No 20 Thermal Spraying Safety, Brown, K.VIII-1868-99, Accelerated Evaluation Of The Level Of Generation Of Welding Fume,

Page 147

Levchenko, O.G. and Metitskil, V.A.VIII-1869-99, Cutting Out The Hazards Of Plasma Arc (Published In Health & Safety, August/September 97, pp4-7), Sykes, R.VIII-1873-99, Exposures From Thorium Contained In Thoriated Tungsten Welding Electrodes, Jankovic, J.T., Underwood, W.S. and Goodwin, G.M.VIII-1874-99, A Geographical Information System Technique For Record-Matching In A Study Of Cancer Deaths In Welders, de Silva, S.R., Bundy, E.W., Smith, P.D. and Gaydos, J.C.VIII-1875-99, Revised Statement From Commission VIII. Welding With Non-Consumables Thoriated Tungsten Electrodes, McMillan, G.H.G.VIII-1876-99, Fume Composition Chart, Brown, K.VIII-1877-99, Problems With Pollutants During Flame-Cutting Work On Scrap Metal (Previously Published In Welding And Cutting 51 (1999) No 3)., Hermesdorf, M. and Spiegal-Ciobanu, V.-E.VIII-1878-99, Manufacture, Processing And Use Of Stainless Steel: A Review Of Health Effects. (Summary Statement Previously Published In The Review Report Issued By The Commissioning Authority EUROFER, Rue Du Noyer, 211, B-1000 Bruxelles, Belgium), Cross, H.J., Beach, J., Levy, L.S., Sadhra, S., Sorahan, T. and McRoy, C.VIII-1879-99, Minutes Of Commission VIII Meetings In Lisbon 21 And 22 July 1999, Anon.VIII-1880-99, Notes On Magnetic Fields In Welding, Couderc, M.P.VIII-1885-00, IIW/CVIII Documents Registered In The IIW Data Base, Anon.VIII-1887-00, Neurobehavioral Performance In Aluminium Welders, Bast-Pattersen, R.VIII-1890-00, Questionnaire On The Use Of Thoriated Tungsten Electrode, Anon.VIII-1891-00, Liste Of IIW/CVIII Documents Recommended For Publication Since 1980, Anon.VIII-1892-00, Effects Of Iron Status On Pharmacokinetics Of Intracheally Instilled Manganese In Rats, Brain, J.D. and Molina, R.M.VIII-1893-00, Summary Of The Final Report On Research Project Nickel - Containing Dusts, Anon.VIII-1894-00, Minutes Of Meetings IIS/CVIII Health And Safety On 06 To 07 March 2000 In ESAB A.B., Anon.VIII-1895-00, Light Exposure And Risk Of Cortical, Nuclear, And Posterior Sub Capsular Cataracts, Delcourt, C., Carriere, I., Ponton-Sanchez, A., Lacroux, A., Covacho, M.-J., Papoz, L. and POLA Study Group.VIII-1897-00, Influence Of Welding Wire Copper Coating In The GMAW Welding Process AndFumes, Floreani, A. and Ascanio, C.VIII-1898-00, Hydrogen: Future Gas Ecology And Saving By Using Self-Produced Gases For The Welding And Flame Workings, Rasoini, R.VIII-1899-00, Draft Agenda. Meeting Of IIW/CVIII 10 To 12 July 2000 At Centro Affari Firenze,Anon.VIII-1900-00, Questionnaire On The Use Of Thoriated Tungsten Electrode Results Of The Enquiry Carried Out Among IIW Members, Anon.VIII-1901-00, Welding With Non-Consumable Thoriated Tungsten Electrodes IIW/CVIII Statement, Anon.VIII-1902-00, List Of IIW/CVIII Documents Published Since 1980 Considered As Best Practice, Anon.VIII-1903-00, List Of IIW/CVIII Documents Published Since 1980 Considered As Best PracticeTo Be Reviewed Or Revised By IIW/CVIII, Anon.VIII-1904-00, Some Remarks On The Question Of Ultra-Fine Particles (UFP) In Welding,

Page 148

Spiegel-Ciobanu, V.E.VIII-1905-00, Comparative Response To Long-Term Particle Exposure Among Rats, Mice, And Hamsters, Heinrich, U.VIII-1906-00, Lung Particle Overload: Implications For Occupational Exposures To Particles, Oberdorster, G.VIII-1907-00, Chronic Inhalation Exposure Of Wistar Rats And Two Different Strains Of Mice To Diesel Engine Exhaust, Carbon Black, And Titanium Dioxide, Heinrich, U., Fuhst, R., Rittinghausen, S., Creutzenberg, O., Bellmann, B., Koch, W. and Levsen, K.VIII-1908-00, Ambient Ultrafine Particles: Inducers Of Acute Lung Injury?, Oberdorster, G., Gelein, R., Johnston, C., Mercer, P., Corson, N. and Finkelstein, N.J.VIII-1909-00, Responses To Welding Fumes: Lung Injury, Inflammation, And Release Of Tumor Necrosis Factor-A And Interleukin-1B, Antonini, J.M., Krishna, G.G. and Brain, J.D.VIII-1910-00, Carcinogenic Effects Of Solid Particles, Heinrich, U.VIII-1911-00, IIW/CVIII Business Plan 2001-2005, Anon.VIII-1912-00, Minutes Of Meeting IIW/CVIII Health And Safety On 10 To 12 July 2000 In Centro Affari Firenze, Anon.VIII-1913-01, Minutes Of IIW Commission VIII Intermediate Meeting, Institut De Soudure, Paris, 19 March 2001, Anon.VIII-1914-01, Commission VIII Best Practice Documents,3 June 2001, Beaufils, D.VIII-1921-01, A Survey Of Vision In French Welders (Recommended For Publication), Marini, F.VIII-1922-01, Effects Of Process Parameters Upon The Dopamine And Olipid Peroxidation Activity Of Selected Welding Fumes As A Marker Of Potential Neurotoxicity, Hudson, N.J.VIII-1923-01, UK Health And Safety Executive Chemical Hazard Alert Notice - Manganese And Its Inorganic Compounds, McMillan, G.H.G.VIII-1925-01, Alveolitis From Long-Term Aluminium Welding With High Fume Exposure, Spiegel-Ciobanu, V.E.VIII-1926-01, Status Report By The Nickel Development Institute - Stainless Steel And Welding Fumes, Jordan, D.E.VIII-1927-01, UK Health And Safety Executive Information Document 668/28 Control Of Fume Arising From Electric Arc Welding Of Stainless Steels, McMillan, G.H.G.VIII-1928-01, 2001 Assessment Of The Risk Of Disorders Of The Lung Being Caused By Occupational Exposures To Emissions Associated With Electric Arc Welding Processes, McMillan, G.H.G.VIII-1929-01, Development Of Plasma Cutting Process That Meets Environmental Requirements, Matusiak, J., Czech, J. and Pasek-Siurek, H.VIII-1930-01, Strategies For Risk Assessment And Control In Welding: Challenges For Developing Countries, Hewitt, P.J.VIII-1931-01, A Model For The Prediction Of Fume Formation In Gas Metal Arc Welding (GMAW), Globular And Spray Modes, DC Positive, Dennis, J.H., Hewitt, P.J., Redding, C.A.J. and Workman, A.D.VIII-1932-01, Effects On The Nervous System In Different Groups Of Workers Exposed To Aluminium, Iregren, A., Sjogren, B., Gustafsson, K., Hagman, M., Nylen, L., French, W., Andersson, M., Ljunggren, K.G. and Wennberg, A.VIII-1933-01, Evaluation Of Health Hazards Caused By Hazardous Substances In Welding, Spiegel-Ciobanu, V.E.VIII-1934-01, Speciation Of Chromium In Welding Fumes. Overheads From Presentation

Page 149

Given At Commission VIII Annual Meeting Slovenia July 2001, Milacic, R., Scancar, J. and Tusek, J.VIII-1935-01, Minutes Of IIW Commission VIII Annual Meeting, Ljubljana, Slovenia 9-11 July 2001, Anon.VIII-1936-01, Occupational Risk Factors, Ultraviolet Radiation, And Ocular Melanoma: A Case Control Study In France, Guenel, P., Laforest, L., Cyr, D., Fevotte, J., Sabroe, S., Dufour, C., Lutz, J.-M. and Lynge, E.VIII-1937-01, Welding Related Parkinsonism Clinical Features, Treatment And Pathophysiology, Racetto, B.A.VIII-1938-01, Metal Exposure During Ship Repair And Shipbreaking Procedures, Mattorano, D., Harney, J., Cook, C. and Roegner, K.VIII-1940-01, Effect Of Cr(Vl) Exposure On Sperm Quality: Human And Animal Studies., Li, H.,Chen, Q., Li, S., Yao, W., Li, L., Shi, Z., Wang, L., Castranova, V., Vallyathan, V., Ernst, E. and Chen, C.VIII-1941-01, Check List Of Recent IIW Commission VIII Documents, McMillan, G.H.G.VIII-1944-02, ULTRAFINE PARTICLES AND SPECIFIC DUSTS - ORAL CONTRIBUTIONS AND POSTERS PRESENTED DURING THE INTERNATIONAL SYMPOSIUM OF ISSA CHEMISTRY AND RESEARCH SECTIONS 11-13 JUNE 2001 IN TOULOUSE, FRANCE, V-ESpiegel-CiobanuVIII-1946-02, Extracts on the carcinogenicity of chrome and chromium compounds taken from Scientific Basis for Swedish Occupational Health STandards XXI, by the Criteria Group for Occupational STandards, edited by Johan Montelius and published in 2000 by The National Institute for Working Life, S-112 79, Stockholm, Sweden, Montelius, J.VIII-1947-02, Occupational risk factors, ultraviolet radiation, and ocular melanoma: a case-control study in France, published in Cancer Causes and Control Vol 12: 452-459,2001, Guenel, P et alVIII-1948-02, Editorial - European chemical regulation and occupational hygiene. Ann occup Hyg 2002:46.3:275-277, Money, Chris D.VIII-1948-02, Editorial. European chemical regulation and occupational hygiene by Chris D. Money. Ann occup Hyg 2002; 46.3:275-277, McMillan, G.H.G.VIII-1949-02, Improved use of workplace exposure data in the regulatory risk assessment of chemicals within Europe. Ann occup Hyg 2002; 46.3:279-285, Money, C.D. and Margary, S.A.VIII-1949-02, Improved used of workplace exposure data in the regulatory risk assessment of chemicals within Europe. CDS Money and SA Margary. Ann occup Hyg 2002:46.3279-285, McMilliam, G.H.G.VIII-1950-02, A proposal for evaluation of exposure data., Tieleman et alVIII-1950-02, A proposal for evaluation opf exposure data. Ann occup Hyg 2002; 46.3; 287-297, Tieleman, E. et alVIII-1951-02, Comparing processes - a software model to tackle the job. In Bulletin, The Technical Journal for Industrial Members of TWI 2002; 43.2: 15-18., Smith, NigelVIII-1952-02, Control of exposure to hexavalent chromium and ozone in gas metal arc weldingof stainless steel by use of a secondary shield gas. Annal occup Hyg 2002; 46.1: 43-48, Dennis, J.H. et alVIII-1953-02, Control of exposure to hexavalent chromium and ozone in tubular wire arc-welding processes by replacement of potassium by lithium or by addition of zinc. Annal occup Hyg 2002; 46.1: 33-43, Dennis, J.H. et alVIII-1954-02, A Model for preduction of fume formation rate in gas metal arc welding (GMAW).

Page 150

Globular and Spray Modes, DC electrod positive. Annal occup Hyg 2001; 45.2: 105-113, Dennis, J.H. et alVIII-1955-02, June 2002 update on German investigation of the health effects of welding aluminium, Zschiesche, W. (submitted by)VIII-1956-02, Optimised wire fabrication reduces emissions during aluminium welding, Kraume, G. (submitted by)VIII-1957-02, Epidemiological study to investigate potential interaction between physical and psychosocial factors of work that may increase the risk of symptoms of musculoskeletal disorder of the neck and upper limb. Occup Environ Med 2002; 59:269-277, Devereux, J.J. et alVIII-1958-02, Development of a systematic observation protocol of physical exposure of the back: a preliminary study. Ann accup Hyg 2002; 46.3: 317-327, Tousignant, M. et alVIII-1959-02, Use of sognitive psychology and muscle movement mechanics in welder's training. Institute Joint of Metals, Poland, Jastrzebski et alVIII-1960-02, Minutes of Commission VIII Meetings during Annual Assembly in Copenhagen 23-28 June 2002, McMillan G.H.G. (submitted by)VIII-1961-02, The combination of effects on lung cancer of cigarette smoking and exposure in Quebec Miners and Millers. Ann occup Hyg 2002; 46.1:5-13, Liddell, F.D.K. and Armstrong, B.G.VIII-1962-02, Health interventions for the metal working industry: which is the most cost-effective? A study from a developing country. Occ Med 2002 52.2:129-135, Salinas A.M.et alVIII-1963-02, IIW Select Committee on Standardization - Responsibilities of appointed IIW personnel at ISO or CEN meetings, Beaufils, D. (submitted by)VIII-1964-02, Cancer incidence and magnetic field exposure in industries using resistance welding in Sweden. Occup Environ Med 2002; 59: 481-486, Hakansson, N. Et alVIII-1965-02, Joint action of smoking and asbestos exposure on lung cancer. Occup Environ Med 2002; 59:494 and 495, Liddell, F.D.K.VIII-1966-02, Case Report - Photoretinitis: an underestimated occupational injury? Occup Med 52.4, 223-225, 2002, Magnavita, N.VIII-1967-02, TWI Report 736/20002 Evaluation of the effect of arc welding p[ractice on fume emission rate, exposure to fume and its control, Carter, G.J.VIII-1968-02, Draft Commission VIII 2003 Statement Lung Cancer Risk in Electric Arc Weldersissued for comment., McMilland, Grant (submitted by)VIII-1969-02, Chromium in stainless steel welding fumes. Published in Materiaux & Techniques No 1-2, 2002, Cunat, Pierre-JeanVIII-1970-02, Effects of Extremely Low Frequency Electromagnetic Fields on Haematologic and Immunologic Parameters in Welder. Archives of Medical Research 33, Dasdag, S. et alVIII-1976-03, Manganese - Exposure Limits, Jordan, DavidVIII-1977-03, Ultrafine particles, Donaldson, K. et alVIII-1978-03, Pulmonary effects of welding fumes: Review of worker and experimental animal studies, Antonini et alVIII-1980-03, Workplace Exposure to Submicron Particle Mass and Number Concentrations from Manual Arc Welding of Carbon Steel, Brown, K.L.VIII-2003-83, Direct Extraction From Welding Stations Is A Good Idea, If Properly Done!, Grun, H.VIII-2005-83, The Industrial Hygiene Audit: Purpose And Implementation, Corn, M. and Lees,

Page 151

P.S.J.VIII-2006-83, Industrial Hygiene Applications Of Microcomputers II. Calculations, Statistics, Communications, Word Processing, Garber, B.T.VIII-2007-83, Computing Partial Shift Respirator Use Periods, Shotwell, H.P. and Caporossi, J.C.VIII-2008-83, Toxicological Evaluation Of Lead-Cadmium Solder, Dubeikovskaya, L.S., Checkunova, M.P., Minkina, N.A. and Salangina, L.I.VIII-2009-83, Peculiarities Of Allergic Diseases Of The Upper Respiratory Tracts Of Workers Engaged In Welding Production, Ostapkovich, V.E., Pankova, V.B., Ozhiganova, V.N. and Kireev, V.I.VIII-2010-83, Mortality Of Workers Manufacturing Friction Materials Using Asbestos, Berry, G. and Newhouse, M.K.VIII-2012-83, Results Of A Survey: Protection Of Dockyard Welders, McMillan, G.H.G.VIII-2013-83, Ocular Hazards Of Arc Welding Light On The Cornea Endothelial Cells And Lens, Yagami, T., Yamaguchi, H., Miyata, M. and Shimizu, K.VIII-2014-83, Detection Methods Of Deposited Dust In The Lung Of Welders By Magnetic Field Measurements, Yagami, T., Yamaguchi, H., Nemoto, I., Kotani, M. and Chiyotani, K.VIII-2015-83, Allergic Bronchial Reactions Due To Stainless Steel Welding Fumes, Cirla, A.M.,Baruffini, A., Pisati, G. and Zedda, S.VIII-2016-83, Studies On The Formation Of Toxic Substances During Welding Under Hyperbaric Conditions And Of Associated Acute Health Hazards, Press, H. and von Nieding, G.VIII-2018-83, Safety Information Sheet No 1: General List Of Publications, Information & Services On Health & Safety In Welding Available From The Welding Institute, Jenkins, N.VIII-2019-83, New Approach Would Help Control Weld Fumes At Source. Part One: Biomedical Background, Gray, C.N., Hewitt, P.J. and Dare, P.R.M.VIII-2020-83, National Activities In Norway, Anon.VIII-2021-83, New Approach Would Help Control Weld Fumes At Source. Part 3: MMA Fumes, Gray, C.N., Hewitt, P.J. and Dare, P.R.M.VIII-2022-83, The Health Of Welders In Naval Dockyards - Summary, McMillan, G.H.G.VIII-2023-83, Peculiarities Of Allergic Diseases Of The Upper Respiratory Tracts Of Workers Engaged In Welding Production, Ostapkovich, V.E., Pankova, V.E., Ozhiganova, V.N. and Kireev, V.I.VIII-2024-83, Toxicological Evaluation Of Lead-Cadmium Solder, Dubeikovskaya, L.S., Checkunova, M.P., Minkina, N.A. and Salangina, L.I.VIII-2030-83, Urine Chromium As An Estimator Of Air Exposure To Stainless Steel Welding Fumes, Sjogren, B., Hedstrom, L. and Ulfvarson, U.VIII-2031-83, Respiratory Symptoms And Pulmonary Function In Welders Of Mild Steel: A Cross-Sectional Study, Gellerman Keimig, D., Pomrehn, P.R. and Burmeister, L.F.VIII-2032-83, Contact Lenses And The Welder. Safety Information Sheet No 3. The Welding Institute. Including Letter From Mr F Lunau (UK) Of 1983-02-21 And Letter From Mme Granjon (France) Of 1983-03-23, Anon.VIII-2034-83, The Assessment Of Risk: Application To The Welding Industry Lung Cancer, Stern, R.M.VIII-2035-83, Guidance On Welding Fume Control, Anon.VIII-2036-83, Lung Retention Of Welding Fumes And Ventilatory Lung Functions - A Follow-Up Study Of Shipyard Welders, Kalliomaki, P.-L., Junttila, M.-L., Kalliomaki, K.,

Page 152

Korhonen, O. and Rahkonen, E.VIII-2053-84, The Health Of Welders In Naval Dockyards - The Risk Of Asbestos-Related Diseases Occurring In Welders, McMillan, G.H.G.VIII-2054-84, Aluminium In The Blood And Urine Of Industrially Exposed Workers, Sjogren, B.,Lundberg, I. and Lidums, V.VIII-21-79, Method For Measuring Total Amount Of Weld Fumes Generated By Covered Electrode, Anon.VIII-536-73, Documents From Working Group 3, Anon.VIII-569-74, Welder's Lung: Diverse Or Neural Lung Modifications, Backup, H.VIII-570-74, Welding In Confined Spaces With Oxygen Deficient And With Oxygen Enriched Atmosphere, Rames, J.VIII-585-74, On The Decomposition Of Trichloroethylene, Perchloroethylene And Methyl Chloroform In Welding Works, Dahlberg, J.A., Andersson, H. and Wettstrom, R.VIII-650-76, Health Supervision And Occupational Safety Control Of Welders And Welder's Working Places, Backup, H.VIII-654-76, Industrial Health Aspects On The MIG Welding Of Al-Alloys, Honma, K., Yamaguchi, H., Yagami, T. and Araki, Y.VIII-655-76, Phosgene Formation During Welding In Air Contaminated With Perchloroethylene, Andersson, H.F., Dahlberg, J.A. and Wettstrom, R.VIII-656-76, The Biological Evolution Of The Toxicity Of Products Of Pyrolysis And Combustion Of Materials, Herpol, CVIII-658-76, Accident Dangers In Submarine Cutting And Welding Operations, Anon.VIII-659-76, Abnormalities In Organs Of Mice Induced By A Magnetic Field, Barnothy, M.F. and Sumegi, I.VIII-660-76, Magnetic Fields And The Number Of Blood Platelets, Barnothy, M.F. and Barnothy, J.M.VIII-661-76, Compensation In Norway For Fires Known Or Suspected To Be Caused By Welding And Soldering During The Years 1969-1973, Jahr, J.VIII-662-76, Comments On The Remarks Made In The IIW - Document VIII-610-75, By J H Wellard (UK), On The IIW-Document VIII-536-73 Section 3 - About The Rules Of Filter Glasses /Working Group D/, Yoshida, T.VIII-664-76, Forging, Hammers, Automation And The Environment, And Auto-Forging Presses, Anon.VIII-665-76, Nitrosyl-Hemoglobin Formation In The Blood Of Animals Exposed To Nitric Oxide,Oda, H., Kusumoto, S. and Nakajima, T.VIII-668-76, Comments On The IIW-Document VIII-560-74 Sanitation Of Labour Conditions AtHigh-Frequency Welding Of Plasticized Rubber In Electromagnetic Field Of Short Ultrashort Waves /P P Fukalova & N D Khramova, Daw, A.W.VIII-669-76, Comments On The IIW-Document VIII-605-75 A Simple Reliable Method For The Determination Of Airborne Hexavalent Chromium /M T Abell & J R Carlberg, Buckup, H.VIII-671-76, Concentrations Of Gases And Fumes In Plasma Arc Cutting, Press, H.VIII-672-76, Respiratory Symptoms, Chronic Bronchitis And Ventilatory Function In Shipyard Welders, Barhad, B., Teculescu, D. and Craciun, O.VIII-673-76, Accident Dangers In Submarine Cutting And Welding Operations/Summary Of IIW-Document VIII-578-74/, Storace, G. and Galeazzi, C.VIII-675-76, Trend Of Standardization On Welding, Safety And Health In Japan, Granjon, M.-L.,

Page 153

VIII-676-76, Japanese Industrial Standard. Methods Of Measuring Weld Fume Concentration,Granjon, M.-L.VIII-677-76, Method Of Determining Weld Fume Concentration In Welding Environment, Granjon, M.-L.VIII-678-76, Psychophysiological Effects Of Extremely Low Frequency Electromagnetic Fields:A Review, Persinger, M.A., Ludwig, H W. and Ossenkopp, K.-P.VIII-679-76, Babs' Statement On Cadmium Fumes, Anon.VIII-680-76, Anti-Dust Helmet, Anon.VIII-681-76, Builder Sees Trend To Automate Hot Forging, Tomioka, K.VIII-683-76, Determination Of Decomposition Products Formed During Welding In Painted Steel. / Summary Of IIW-Document VIII-633-75/, Bille, M., Rosendahl, C.-H., Steen, A., Svensson, and Wallen, K.-A.VIII-685-76, Safety Requirements For Arc Welding Equipment - Plugs, Socket-Outlets And Couplers For Welding Cables / Regles De Securite Pour Le Material De Soudage A L'Arc Prises De Courant, Connecteurs Et Prolongateurs De Cables De Soudage, Anon.VIII-686-76, Experiences Relating To The Release Of Vinyl Chloride During The Processing Of Polyvinyl Chloride, Pel, H.J.VIII-687-76, Some Considerations About Fumes Generated In Arc Welding Processes, Kimura, S., Kobayashi, M. and Maki, S.VIII-688-76, Odourising Of Oxygen For Welding, Cutting And Allied Processes, Grothe, I.VIII-689-76, Accident Dangers In Submarine Welding And Cutting Operations, Storace, G. andGaleazzi, C.VIII-690-76, Safety Code Of Practice For Underwater Thermal Cutting, Goldberg, F.VIII-700-77, Working Conditions In The Forge, Anon.VIII-701-77, Factors Influencing The Output Of Ultraviolet Radiation During Welding, Emmett, E.A. and Horstman, S.W.VIII-702-77, Firelosses By Welding In Czechoslovakia 1958-1975, Rames, J.VIII-703-77, Neurophysiologic Studies Of Welders In Shipbuilding Work, Petersen, I., Kadefors, R. and Persson, J.VIII-704-77, Comparaison Des Resultats De Mesures De Fumees De Soudage Dans Trois Laboratories./ Comparison Of The Results Of Welding Fumes Measurements At Three Laboratories, Anon.VIII-705-77, Inhalation Of Metallic Oxides, Hewitt, P.J.VIII-706-77, Applications Of Neutron Activation Analysis In The Control Of The Working Environment, Hewitt, P.J.VIII-707-77, Silicic Acid In Welding Smokes, Buckup, H. and Dessler.VIII-708-77, Proposed Convention Concerning The Protection Of Workers Against Occupational Hazards In The Working Environment Due To Air Pollution, Noise And Vibration,Anon.VIII-709-77, Effects Of A Welding Helmet And Dust Respirators On Respiration At Rest And During Exercise, White, T., Schutz, A. and Lundgren, K.-M.VIII-710-77, Determination Of Exposure To Electric Fields In Extra High Voltage Substations, Lovstrand, K.G.VIII-712-77, X-Ray Fluorescence Techniques - Analytical Use Of Proton-Induced X-Ray Emission, Johansson, T.B., Ahlberg, M., Akelsson, R., Johansson, G. and Malmqvist, K.VIII-713-77, Welding Fumes, Their Effect On Man - Preliminary Results Of An Australian Survey, Ouw, K.M., Jones, R., Young, I., Reece, R., Shandar, A. and Hayes, M.

Page 154

VIII-716-77, Precautionary Labeling For Weld Fumes, Anon.VIII-717-77, Methods For Chemical Analysis Of Weld Fumes, Anon.VIII-718-77, Environmental Control In Welding And Cutting, Anon.VIII-719-77, Dust Masks In Welding And Cutting, Anon.VIII-729-77, Draft For Development. Methods For The Sampling And Analysis Of Fume From Welding And Allied Processes, Anon.VIII-732-77, Medical Surveillance Problems Under Proposed OSHA Standards, Joyner, R.E.VIII-733-77, Muscular Reaction To Welding Work: An Electromyographic Investigation, Kadefors, R.VIII-734-77, Welding Fume And Welders' Health, Ross, D.S. and Hewitt, P.J.VIII-735-77, Circulatory Adaption During Static Muscular Contractions - A Review, Kilbom, A.VIII-736-77, Effects Of A Short, Heavy Exposure To Lead Dust Upon Blood Level, Erythrocyte (-Aminolevulinic Acid Dehydrataste Activity And Urinary Excretion Of Lead, (-Aminolevulinic Acid And Coproporphyrin. Results Of A 6-Month Follow-Up Of Two Male Subjects, Schutz, A. and Skerfving, S.VIII-737-77, Effects And Dose-Response Relationships Of Toxic Metals. A Report From An International Meeting, Nordberg, G.F.VIII-738-77, Biological Criteria For Selected Industrial Toxic Chemicals: A Review, Lauwerys, R.VIII-739-77, Inflation Impact Statements, Gerhardsson, G.VIII-744-77, Firelosses By Welding In Switzerland 1960-1974, Buhrer, P.VIII-745-77, IGC Attitude Concerning Draft Paper IIW 688-76, Anon.VIII-747-77, (Part 1) The Production And Characterisation Of A Reference Standard Welding Fume, Stern, R.M.VIII-747-77, (Part 2) The Production And Characterisation Of A Reference Standard Welding Fume. The Chemistry Of Welding Smoke And Its Variation With Welding Process And Process Parameters, Stern, R.M.VIII-748-77, A New Welding Table, Habil, Erdmann-Jesnitzer, Delventhal, B. and Konig, R.VIII-749-77, Fume Classification Of Coated Electrodes For Manual Welding, Anon.VIII-750-77, Different Articles Concerning Contact Lenses, Anon.VIII-751-77, The Health Of Welders In Naval Dockyards. Acute Changes In Respiratory Function During Standardized Welding, McMillan, G.H.G. and Heath, J.VIII-752-77, The Health Of Welders In Naval Dockyards. A Comparison Of Sickness AbsenceOf Welder And Other Craft Groups. Interim Report, June 1977, McMillan, G.H.G.VIII-753-77, The Measuring Method Of Ferromagnetic Lung Contamination And Its ApplicationTo Arc Welders, Kalliomaki, P.-L. and Vaaranen, V.VIII-754-77, Urinary Chromium As An Indicator Of Exposure Of Welders To Chromium, Tola, S., Kilpio, J. and Virtamo, M.VIII-755-77, Occupational Asthma Caused By Stainless Steel Welding, Kalliomaki, P.-L., Keskinen, H. and Virtamo, M.VIII-773-78, Possible Different Injury Of Solid Particles Of Powder Mixed With Gaseous Substances Present In The Work Atmosphere, Ambrosi, L.VIII-777-78, List Of Certain Documents Of Interest, Anon.VIII-779-78, A Chemical, Physical And Biological Assay Of Welding Fumes, Stern, R.M.VIII-780-78, A Chemical, Physical And Biological Assay Of Welding Fume, Part II: ImplicationsOf Positive Mutagenic Tests, Stern, R.M.VIII-783-78, Asthma Due To Inhaled Chemical Agents - Fumes From Multicore Soldering Flux

Page 155

And Colophony Resin, Fawcett, I.W., Newman Taylor, A.J. and Pepys, J.VIII-784-78, Mutagenicity Of Fume Particles From Stainless Steel Welding, Hedenstedt, A., Jenssen, D., Lidesten, B.-M., Ramel, C., Rannug, U. and Stern, R.M.VIII-786-78, Summaries Of Documents: Asthma Due To Aluminium Soldering Flux By G M Sterling (UK) And Asthma Due To Inhaled Chemical Fumes - Amino-Ethal Ethanolamine In Aluminium Soldering Flux By J Pepys And C A C Pickering (UK), Anon.VIII-787-78, Air Ions And Human Performance, Hawkins, L.H. and Baker, T.VIII-788-78, Measurement Of Lung Contamination Among Mild Steel An Stainless Steel Welders, Kalliomaki, K., Kalliomaki, P.-L., Kelha, V., Sortti, V. and Vaaranen, V.VIII-789-78, Modern Apparatuses And Measurement Methods Used For Investigations And Developments In Welding Fumes Removals, Erdmann-Jesnitzer. And Konig, R.VIII-791-78, Respiratory Disease In Workers Exposed To Solder Flux Fumes Containing Colophony (Pine Resin), Burge, P.S., Harries, M.G., O'Brien, I.M. and Pepys, J.VIII-792-78, Occupational Health Aspects Of Soft Soldering, Lunau, F.W.VIII-797-78, Preparation Of Welding Fume Samples For Analyses, Virtamo, M.VIII-804-78, Method For Sampling Airborne Particulates Generated By Welding And Allied Processes, Anon.VIII-806-79, Toxicity Of Fumes Exhalated During Welding With Al Electrodes, Zdena, F. and Kosnac, L.VIII-807-79, Toxic Substance Ventilation In Soldering And Brazing, Kosnac, L.VIII-808-79, The Methods Of Testing Welding Filler Materials From The Viewpoint Of Work Hygiene, Anon.VIII-814-79, Investigation In Welding Hygiene And Safety In CSSR, Kosnac, L.VIII-815-79, Measurement Of Lung Contamination Among Mold Steel And Stainless Steel Welders, Kalliomaki, P.-L., Kalliomaki, K., Kelha, V., Sortti, V. and Korhonen, O.VIII-816-79, Air And Urine Chromium Measurements In Connection Of Welding Of Stainless And Acid Resisting Steels, Tola, S., Virtamo, M. and Kilpio, J.VIII-820-79, Methods For Chemical Analysis Of Weld Fumes, Anon.VIII-822-79, Method For Determining Average Concentration Of Weld Fumes In Welding Environment, Anon.VIII-823-79, Health Of Welders, Those In Similar Trades, Their Assistants And Neighborhood Workers, McMillan, G.H.G.VIII-824-79, Respiratory Protective Equipement For Welders, Anon.VIII-825-79, Proces-Verbal De La Reunion De Paris Groupe De Travail C, Granjon, M.L.VIII-826-79, Problemes Poses Par L'Emission Des Fumees Au Cours Du Soudage A L'Arc Avec Electrodes Enrobees, Riedinger, U. and Beaufils, D.VIII-827-79, Recommendations Of Maximum Allowable Concentrations Of Toxic Substances And Others In The Work Environment, 1978, Anon.VIII-829-79, Draft Revision Of Document IIS/IIW-472-75. Code Of Practice For Thermal Lancing, Lingscheidt, G., Grothe, I. and Schober, I.VIII-833-79, A Simple Analytical Technique For The Determination Of Hexavalent Chromium In Welding Fumes And Other Complex Matricies, Thomsen, R.VIII-834-79, Control Technology For Improvement Of Welding Hygiene, Stern, R.M.VIII-835-79, A Model For The Assessment Of The Health Risk To Welders, Stern, R.M.VIII-836-79, The Study Of The Welding Industry With The Air Of Identifying, Measuring And Eliminating Health Risks To Welders, Stern, R.M.VIII-839-79, Formation Of Nitric Oxides In Gas Welding - Measures For The Prevention Of

Page 156

Health Injuries, Press, H.VIII-840-79, Perspectives For Industrial Hygiene. II: The Present Situation In The Welding Industry, Stern, R.M.VIII-842-79, Air Pollution In The Plasma Cutting Of Steel, Stainless Steel And Aluminium, Anon.VIII-859-80, Chromium In Stainless Steel Welding Fume And Its Removal, Stern, R.M.VIII-860-80, A Chemical, Physical And Mutagenic Assay Of Welding Fume, Stern, R.M.VIII-861-80, Production And Characterization Of A Reference Standard Welding Fume, Stern, R.M.VIII-862-80, Detecting A Possible Increase In Cancer Risk For Welders, Stern, R.M.VIII-868-80, Hvem Er Den Naeste (Der Far Kraeft)?, Stern, R.M.VIII-869-80, Welders Health Examinations, McMillan, G.H.G.VIII-878-80, SVC Publications And Reports From The Working Environment Research Group, Anon.VIII-879-80, Formation Of Toxic Substances In Gas Shielded Arc Welding. Part I: Principles, Test Equipement; Trial, Press, H. and Florian, W.VIII-880-80, Formation Of Toxic Substances In Gas Shielded Arc Welding. Part 2: Amount Of Toxic Substances Formed In The Gas Shielded Welding Processes MAG, MIG And GTA, Press, H. and Florian, W.VIII-881-80, Criteria Of Czechoslovak Hygiene And Safety Regulations At Certification And Introduction Of Consumables For Welding, Brazing And Soldering, Kosnac, L.VIII-882-80, Highest Allowable Concentration Of Toxic Substances In Working Environment In Czechoslovakia - 1978, Kosnac, L.VIII-883-80, The Employment Of Mathematical Methods In Prevention Of Injuries During Welding, Svatopluk, H.VIII-884-80, Adaptive Systems And Prevention Of Injuries In Welding, Svatopluk, H.VIII-885-80, Capture Efficiencies Of Local Exhausts For Hand Grinding, Drilling And Welding, Jansson, A.VIII-886-80, Effect Of Air Ionization On Blood Serotonin In Vitro, Tal, E., Pfeifer, Y. and Sulman, F.G.VIII-887-80, Some Cases Of Fire Caused By Welding Or Cutting Fire Caused By Flame Cutting, Buhrer, P.VIII-888-80, An Analytical Procedure For Determining Chromium In Samples Of Airborne Dust,Bohgard, M., Jangida, B.L. and Akelsson, K.R.VIII-890-80, Explosion Hazards Of Disposable Butane Cigarette Lighters, Lunau, F.W.VIII-891-80, Comments To Document VIII-859-80, Chromium In Stainless Steel Welding FumeAnd Its Removal, Kobayashi, M.VIII-892-80, Threshold Limit Values In The U.K., Lunau, F.W.VIII-894-80, Investigation Of Health Hazards Of Chemical Compounds In The Work Area. Report No. XV, Anon.VIII-895-80, Highlights Of The Welding And Cutting Accidents Survey (U.S. Bureau Of Labor Statistics USA 1978), Dellby, O.VIII-896-80, Firelosses By Welding In Switzerland 1960-1978, Buhrer, P.VIII-897-80, Firelosses By Welding In Austria 1967-1978, Buhrer, P.VIII-898-80, Firelosses By Welding In Austria 1967-1978, Divided In Gas Welding And Arc Welding (1973-1978), Buhrer, P.VIII-899-80, The Prediction Of Fume Compositions In Stainless Steel Metal Inert Gas Welding,

Page 157

Hewitt, P.VIII-900-80, The Effect Of Oxygen On The Rate Of Fume Formation In Metal Inert Gas Welding Arcs, Hewitt, P.VIII-901-80, Effect Of Alkalized Cellulose Filter Against Nitrogen Dioxide In The Weld Gas, Yamaguchi, H., Honma, K., Yagami, T., Sano, H. and Araki, Y.VIII-902-80, Japanese Recommendation Of Threshold Limit Values, Anon.VIII-903-80, Current Japanese Standards Concerning Welding Environment (May 1980), Anon.VIII-904-80, Experimental Investigation On Hazard Of Lithium In Welding Fume, Kawada, K. and Kobayashi, M.VIII-905-80, Reference Values In Biological Monitoring Of Chemical Exposure, Virtamo, M.VIII-906-80, About The Flame Resistance Of Work Clothing Materials, Pakkala, L.VIII-907-80, Occupational Asthma Due To Stainless Steel Welding Fumes, Keskinen, H., Kalliomaki, P.-L. and Alanko, K.VIII-908-80, Threshold Limit Values In Finland, Virtamo, M. and Hietanen, M.VIII-909-80, The Anatomy Of Fatal Welding Accident, Seppo Rantamaula, D.I.VIII-923-81, List Of Documents - Liste Des Documents, Anon.VIII-924-81, Annual Report Of Commission VIII Health And Safety, Anon.VIII-925-81, Agenda - Ordre Du Jour - Commission VIII, Anon.VIII-926-81, List Of Attendance - List De Presence, Anon.VIII-927-81, Resolutions, Anon.VIII-928-81, List Of Working Groups In Commission VIII, 1981, Anon.VIII-930-81, Equipement Note. A Tracking Task Used For The Simulation Of Manual Metal Arc Welding, Tredre, B.E. and Collins, J.C.VIII-931-81, A Retrospective Cohort Study Of Mortality Among stainless Steel Welders, Sjogren, B.VIII-932-81, Laboratory Method For Measuring Fume Generation Rates And Total Fume Emission Of Welding And Allied Processes. AWS F1.2-79, Kennebeck, M.E.VIII-934-81, Gaz Et Fumees De Soudage, Anon.VIII-935-81, Transition Between Tri- And Six- Valence Of Chromium, Hara, N.VIII-936-81, The Effect Of Welding Fumes On Ocular Readaption Time, Linde, C.-J.VIII-937-81, Long-Term Effects Of Welding Fumes Upon Respiratory Symptoms And Pulmonary Function, Akbarkhanzadeh, F.VIII-938-81, Assessment Of Airway Obstruction With Particular Reference To The Small Airways, Kelman, G.R.VIII-939-81, The Problem Of Thresholds For Chemical Carcinogens - Its Importance In Industrial Hygiene, Especially In The Field Of Permissible Limits For Occupational Exposure, Truhaut, R.VIII-940-81, Metal Mutagenicity Testing (Welding Fumes), Stern, R.M.VIII-942-81, An Investigation Of Samples Of Particles From Stainless Steel Arc Welding (Manual Metal Arc And Metal-Inert Gas) Fumes, Using The Ames Microsome Mediated/ Salmonella Reverse Mutation Test, Hewitt, P.J., Hicks, R. and Sahyoun, H.A.VIII-943-81, An Investigation Of The Experimental Induction Of Hypersensitivity In The GuineaPig By Material Containing Chromium, Nickel And Cobalt From Arc Welding Fumes, Hicks, R.,Hewitt, P.J. and Lam, H.F.VIII-944-81, Nuclear Activation Techniques In The Life Sciences 1978, Anon.VIII-945-81, Epidemiologic Investigation Of Workers Exposed To Welding Hazard, Ambrosi, L.

Page 158

VIII-946-81, Assaying Potential Carcinogenicity Of Welding Fume And Hexavalent Chromium With The Mammalian Spot Test, Knudsen, I. and Stern, R.M.VIII-947-81, Criteria For Assessment Of Potential Hazards To Welders Health, Stern, R.M.VIII-948-81, Relative Solubility Of Nickel Welding Fume Fractions And Their Genotoxicity In Sister Chromatid Exchange In Vitro, Niebuhr, E., Stern, R.M., Thomsen, E. and Wulf, H.C.VIII-949-81, Introduction To Risk Assessment. Risk Assessment In The Welding Industry: Part 1, Stern, R.M.VIII-950-81, Process Dependent Risk Of Delayed Health Effects For Welders. Risk Assessment For The Welding Industry: Part 2, Stern, R.M.VIII-951-81, Recommended Safe Practices For The Preparation For Welding And Cutting Of Containers And Piping That Have Held Hazardous Substances, Anon.VIII-953-81, Skin And Eye Diseases Among Arc Welders And Those Exposed To Welding Operations, Emmett, E.A., Buncher, C.R., Suskind, R.B. and Rowe, K.W.VIII-954-81, Collection, Analysis And Composition Of Welding Fumes, Thomsen, E. and Stern,R.M.VIII-955-81, Annual Report Of Working Group For Risk Assessment, Stern, R.M.VIII-956-81, Report On National Activity Of Japan, Anon.VIII-957-81, List Of German Laboratories Were R & D On Fumes And Gazes In Welding Are Being Carried Out, Sossenheimer, H.VIII-958-81, La Prevention Des Incendies Causes Par Le Soudage Et D'Autres Travaux A Feux Ouverts, Anon.VIII-959-81, New Maximum Allowable Concentrations Of Dust In Work Environment, Anon.VIII-962-81, Welding Environment Newsletter, Anon.VIII-963-81, Superoxide Involvement In Negative Air Ion Effects, Anon.VIII-964-81, Respirator Protection Factors: Part II - Protection Factors Of Supplied-Air Respirators, Hack, A.L., Bradley, O.D. and Trujillo, A.VIII-965-81, The Health Of Welders In Naval Dockyards: The Work Situation And Sickness Absence Patterns, McMillan, G.H.G. and Molyneux, K.VIII-966-81, Relationship Between Air And Urine Concentrations Of Fluorides, Chromium And Nickel In Welding /Summary/, Sjogren, B.VIII-967-81, An Example Of Administration On Environmental Hygiene In Japan, Araki, Y.VIII-968-81, Ultraviolet Emissions In Welding, Transmissions Of Safety Glasses, And Eye Hazards Of Welders, Anon.VIII-970-81, AWS Document Fumes And Gases In The Welding Environment, Anon.VIII-971-81, Characterization Of Arc Welding Fume - Introduction, Anon.VIII-973-81, Catalogue Of Solid And Gaseous Substances Formed During Brazing, Welding And Cutting, Kosnac, L.VIII-979-81, Monitoring Personnel Exposure To Stainless Steel Welding Fumes In Confined Spaces At Petrochemical Plant, Wilson, J.VIII-980-91, Letters From Frederich T McDermott, American Conference Of Governmental Industrial Hygienists, Inc. Of August 3, 1981 Concerning Criteria For TLVs And Chromium, Nickel, Nitrogen Oxides And Ozone, Anon.VIII-981-91, How To Control Hazards In Plasma Cutting Of The Metal Hard And Heavy Plates,Rames, J.VIII-982-81, Air Ion Research, Bissell, M.VIII-983-81, Effects Of Air Ions, First, M.W.VIII-984-81, Health And Safety In Brazing And Allied Processes. Data Sheet Presented By

Page 159

Johnson Matthey Metals Limited, UK, Anon.VIII-985-81, Suspected Case Of Occupational Disease Caused By Isotope Photography Of Pipe Welding Seams, Rantamaula, S.VIII-986-81, Ultraviolet Emissions From The Arc-Welding Of Aluminium-Magnesium Alloys, Bartley, D.L., McKinnery, W.N. and Wiegand, K.R.VIII-987-81, Mortality Of Welders, Shipfitters, And Other Metal Trades Workers In Boilmakers Local No 104, AFL-CIO, Beaumont, J.J. and Weiss, N.S.VIII-989-81, Minutes Of The Meeting Of September 8, 1981, Anon.VIII-990-81, Noise In Welding Shops, Olkinuora, P., Pekkarinen, J. and Starck, J.VIII-991-81, A Welding Fume Exposure System With Automatic Coated-Electrode Arc Welding, Kivela, R., Kalliomaki, K., Kalliomaki, P.-L. and Vaaranen, V.VIII-992-81, Methods For The Sampling And Analysis Of Fume From Welding And Allied Processes, Anon.VIII-994-82, List Of Documents - Liste Des Documents, Anon.VIII-995-82, Annual Report Of Commission VIII Health And Safety. Ljubliana (Yugoslavia) Assembly 7 -11 September 1982, Grothe, I.VIII-996-82, Agenda For The Annual Assembly 1982, Anon.VIII-998-82, Resolutions 1982, Anon.VIII-999-82, List Of Working Groups In Commission VIII, 1982, Anon.VIII-A-100-95, Welding And Cutting On Containers - Comments, VIII-A-101-95, Control Of Risks Of Welding, Cutting Or Burning In Confined Spaces - Comments, VIII-B-100-95, Ventilation Procedures Used For Arc Welding Works (Outline), Cornu, J.VIII-B-101-95, Present Situation On Countermeasures Against Welding Fumes In Japan, Anon.VIII-C-100-95, Death Following Exposure To Fine Particulate Nickel From A Metal Arc Process, Rendall, R., Phillips, J.I. and Renton, K.A.VIII-C-101-95, Colophony-Uses, Health effects, Airborne Measurement And Analysis, Sadhra, S., Foulds, I.S., Gray, C.N., Koh, D. and Gardiner, K.VIII-C-102-95, A Mortality Study Among Mild Steel And Stainless Steel Welders, Moulin, J., Wild, P., Haguenoer, J.M., Faucon, D., De Gaudemaris, R., Mur, J.M., Mereau, M., Gary, Y., Toamain, J.P., Birembaut, Y., Blanc, M., Debiolles, M.P., Jegaden, D., Laterriere, B., Leonard,M., Marini, F., Massardier, C., Moulin, M., Reure, M., Rigal, L., Robert, G. and Viossat, M.VIII-C-103-95, Risque De Cancer Chez Les Soudeurs, Moulin, J., Diebold, J.J. and Limasset, J.C.VIII-C-104-95, Retention Of Asbestos Bodies In The Lungs Of Welders, Pairon, J.-C., Martinon, L., Iwatsubo, Y., Vallentin, F., Billon-Galland, M.-A., Bignon, J. and Brochard, P.VIII-C-105-95, Lung Cancer Risk And Welding-Preliminary Results From An Ongoing Case-Control Study, Jockel, K.-H., Ahrens, W. and Bolm-Audorffm, U.VIII-C-106-95, Etude Epidemiologique De Mortalite Sur Le Soudage Dans Le Departement DeLa Loire, Moulin, J., Wild, P., Haguenoer, J.M., Faucon, D., Toamain, J.P., Moulin, M., Gary, Y., Massardier, C., Reure, M., Robert, G. and Viossat, M.VIII-C-107-95, Occupational Medicine Forum - Question On Welder Illness, Anon.VIII-C108-95, Electromagnetic Fields: How Big A Problem In Europe?, Epstein, R.VIII-F-100-95, Reducing Fume Emissions Through Process Parameter Selections, Hewitt, P.VIII-F-101-95, Gas Metal Arc Welding Fume Generation Using Pulsed Current, Castner, H.VIII-F-102-95, Sampling Of Airborne Particles And Gases In The Operator's Breathing Zone -

Page 160

Part 2: Sampling Of Gases, Anon.VIII-F-103-95, Laboratory Methods For Sampling Of Fumes And Gases Generated By WeldingAnd Allied Processes - Part 1: Determination Of Emission Rate And Sampling For Analysis Of Particulate Fume, Anon.VIII-F-104-95, Laboratory Methods For Sampling Of Fumes And Gases Generated By WeldingAnd Allied Processes - Part 2: Determination Of Emission Rates Of Gases, Anon.VIII-F-106-95, Methods For Measurement Of Dust Concentration In Welding Environment. JISZ 3950 - 1994, Anon.VIII-F-107-95, The Effects Of Cadmium (Cd) In Soldering, Nishida, T.VIII-F108-95, Welding Helmet Airborne Fume Concentrations Compared To Personal Breathing Zone Sampling, Liu, D., Wong, H., Quinlan, P. and Blanc, P.D.VIII-G-100-95, A Review Of Arc Welding And Electromagnetic Capability, VIII-G-101-95, Transparent Welding Curtains And Screens For Arc Welding Processes (prEN 1598 Draft Standard), VIII-K-103-95, Understanding The Ergonomics Of Welding Gun Design, VIII-K-104-95, Odorization Of Oxygen In Supply Lines, V-WG3-44-90, The On-Line Ultrasonic Assessment Of Weld Quality, Scruby, C.B., Stares, I.J., Duffill, C. and Haywood, B.C.G.V-WG3-51-91, ISO/TC 176 Quality Management And Quality Assurance Vision 2000 - A Strategy For Individual Standards Implementation In The Quality Arena During The 1990's, Anon.V-WG3-52-91, European Harmonization, CEN/CEMELEC Activities And Member Countries Response To Quality System Assessment And Certification, Anon.V-WG3-53-91, ISO/CEN State Of The Art Related To Welding Technology In Quality Assurance, Inspection And Personnel Qualification, Anon.V-WG3-54-91, Quality Policies And Standardization In Brazil For Welded Constructions, Anon.V-WG3-55-91, Failure Mode And Effect Analysis (FMEA) In Welded Constructions, Anon.V-WG3-56-91, Economic Advantages Of CAQ Demonstrated By The Example Of A Company Specialized In The Manufacture Of Welded Stainless Tubes, Anon.X/XIII/XV-RSDP-65-02, Thickness Design of Axially Compressed Unstiffened Cylindrical Shells with Circumferential Welds, Farkas, J.X/XIII/XV-RSDP-78-03, Report on Experimental Round Robin Tests on Residual Stresses - Joint Working Groiup of IIW Commissions X/XIII/XV, Wohlfahrt, Prof. Dr.-Ing. H.X-1000-81, Evaluation Of The C.O.D. Concept, Deleu, E.X-1001-81, Recent Developments In Elastic Plastic Fracture Mechanics To Significance Of Weld Defects, Burdekin, F.M.X-1002-81, Acceptance Levels For Weld Defects For Quality Control Purpose, Burdekin, F.M.X-1009-82, Detection Of Stable Crack Growth In Fracture Mechanics Tests With An UltrasonicAmplitude Method, Ruge, J.L. and Linnemann, R.R.X-1011-82, Pellini's Theory Of Brittle Fracture And The Limits Of Its Applicability, Fromm, K. and Schulze, H.F.X-1012-82, Fracture Toughness Evaluation Of Welds With Mechanical Heterogeneity, Satoh, K. and Toyoda, M.X-1014-82, Realistic Testing Of Welds By Fatigue Bending At Low Temperature, Nibbering, J.J.W. and Scholte, H.G.X-1016-82, Rupture Et Endommagement, Francois, D.X-1019-82, The Strength Calculation Of The Fillet Welded Joints In Case Of Their Possible

Page 161

Brittle Fracture, Vinokurov, V.A.X-1020-82, Geometric Dimentions Stability In Welded Structures, Sagalevitch, V.M. and Savelyev, V.F.X-1030-83, Prediction Of Stress Corrosion Crack Propagation Behavior In Residual Stress Field Of Type 304 Stainless Steel Welded Joint, Mukai, Y. and Murata, M.X-1031-83, The Incidence Of Mechanical Heterogeneity On Fracture Toughness Evaluation OfWelds, Satoh, K. and Toyoda, M.X-1032-83, A Simple Evaluation Method Of Elastic-Plastic Fracture Toughness And Acoustic Emission Characterization For Structural Steels, Suzuki, M., Shoji, T., Khan, M.A. and Takahashi, H.X-1033-83, Japanese Papers On Numerical Analysis Of Stresses, Strains And Other Effects Produced By Welding, 1981/1982, Satoh, K.X-1034-83, Effect Of Tract Welding On Restraint Intensity And Residual Stress Distribution Of Erection Block Butt Welds, Kureishi, M., Nakajima, H., Kasuga, H., Minehisa, S. and Satoh, K.X-1035-83, Distortion Of Thick Cylinder Welds By Narrow Grove MIG Welding, Ohsawa, M., Nakajima, H., Nagai, A. and Minehisa, S.X-1036-83, Restraint Stresses And Strains Due To Slit Weld In Rectangular Plate -Formulae For Conventional Restraint Intensities Of A Slit In Finite Plate-, Ueda, Y., Fukuda, K. and Kim, Y.C.X-1037-83, Analytical Calculation Method Of Restraint Stresses And Strains Due To Slit Weld Rectangular Plates, Ueda, Y., Fukuda, K. and Kim, Y.C.X-1038-83, Characteristics Of Restraint Stress-Strain Of Slit Weld In A Finite Rectangular Plate And The Significance Of Restraint Intensities As A Dynamical Measure, Ueda, Y., Fukuda, K., Kim, Y.C. and Koki, R.X-1040-83, Surveillance Program For Evaluation Of Material Degradation In Platforming Reactor, Nogata, F., Kawano, K., Takahashi, H., Masaki, J. and Suzuki, M.X-1041-83, Probabilistic Approach To Determining Procedure Non-Destructive Inspection Considering Its Detectability -Practical Application To Steel-Framed Welded Structures-, Nakatsuji, T., Toyoda, M., Fujimori, T. and Satoh, K.X-1042-83, Welding Deformations Due To Fillet Welding Of Stiffened Plates, Fujita, Y., Nomoto, T. and Sakamoto, T.X-1043-83, Fracture Toughness Of Explosive Stainless-Clad HT80 High Strength Steel, Oda, I., Tatsukawa, I., Miura, K., Toyoda, M. and Satoh, K.X-1047-83, IIW Commission X. Sub-Commission X-E. Annual Report For Trondheim Assembly 1983, Anon.X-1052-83, A Fracture Mechanics Analysis Applied To Thermal Shock Conditions, Cowan, A.X-1054-83, Heat Wave Method Development For Practical Application At Determining Metal Fracture Resistance During Cracks Propagation, Vinockurov, V.A., Alexandrovitch, A.A. and Solodov, A.P.X-1055-83, Method For The Solution Of Elasto-Plastic Problems At Welding, Vinockurov, V.A.,Melnikov, V.L. and Kurkin, A.S.X-1056-83, Post Weld Treatment Of Steel Structures, Vinockurov, V.A., Chernykh, V.V., Pokatilov, V.P., Tolstov, A.M. and Eregin, L.P.X-1057-83, Residual Stresses Relief In Welded Structures By Vibration Treatment, Sagalevitch, V.M., Nashivotchnikov, V.V. and Averin, A.S.X-1063-84, Applicability Of Bending COD Test Of Welds For Securing Required Fracture Performance Of Welded Structure, Satoh, K. and Toyoda, M.

Page 162

X-1064-84, A Probabilistic Approach To Evaluation Of Fracture Toughness Of Weld With Heterogeneity, Satoh, K., Toyoda, M. and Minami, F.X-1065-84, Nondestructive Measurement Of Residual Stress In A Fillet Welded Joint By Photographic X-Ray Diffraction Technique, Nagai, K. and Iwata, M.X-1066-84, A Measuring Theory Of Three Dimensional Residual Stresses In Long Welded Joints -LY Method And LZ Method-, Ueda, Y., Fukuda, K. and Fukuda, M.X-1067-84, Simplified Measuring Methods Of Three Dimensional Welding Residual Stresses, Proposal Of nLY Method And Simple LY Method-X-1069-84, Influence Of Shape Of Initial Deflection Upon Compressive Ultimate Strength Of Long Rectangular Plates, Ueda, Y. and Yao, T.X-1070-84, Development Of A Standard Fracture Toughness Test For Weld Metal, Muncner, L.X-1072-84, An Assessment Of Pseudo-Linear Elastic Fracture Mechanics (LEFM) Analysis Based On Charpy V-Notch Properties, Dawes, M.G., Remzi, E.M. and Tio, N.H.X-1073-84, The Influence Of Residual Stresses On The Fatigue Strength Of Hollow Section Joints, Mang, F., Bucak, O. and Steidl, G.X-1074-84, List Of Document Numbers Issued In 1984, Wells, A.A.X-1076-84, Final Report On Questionnaire On The Use Of Fracture Mechanics Methods For The Assessment Of The Significance Of Weld Defects, Burdekin, F.M.X-1077-84, Fracture Mechanics Tests For Weld Metal: The UK Viewpoint, Cowan, A.X-1078-84, Hot Forming And Heat Treatment Procedure Of Spherical Pressure Hull For Deep Submersible Research Vehicle, Kanatani, F., Matsui, S., Matsumura, H., Takeda, T., Yamada,S. and Kobayashi, N.X-1080-84, Rapport Du Groupe De Travail, Mecanique De La Rupture, Francois, D.X-1083-84, Annual Assembly, Boston 1984. Chairman's Report - Commission X, Wells, A.A.X-1084-85, Study On The Fracture Behaviour Of Welded Joints With A Crack In Transverse Hard Layer, Tian, X., Zhu, H. and Ma, W.X-1085-85, Correlations Relating Charpy Energy To Jc And Critical CTOD In Weld-HAZs, Kanazawa, T., Watanabe, I. and Suzuki, M.X-1086-85, The Chairman's Report On Working Group On Numerical Analysis Of Stresses, Strains, And Other Effects Produced By Welding, Masubuchi, K.X-1087-85, State-Of-The-Art And Future Possibilities Related To Numeral Analysis Of Stresses, Strains, And Other Effects Produced By Welding, Masubuchi, K.X-1089-85, Working Group On Fracture Mechanics Testing Of Weld Metal And/Or HAZ. Report For The Strasbourg Assembly, 1985, Satoh, K. and Toyoda, M.X-1090-85, Bending Critical COD Versus Tensile Fracture Strength Of Steel Welded Joints, Kaihara, S., Murayama, T., Kohno, T., Asai, J., Satoh, K. and Toyoda, M.X-1091-85, A Remark On The 1984 Houdremont Lecture From The Stress Analysis Point Of View, Amiot, P., Lieurade, H.P. and Radenkovic, D.X-1092-85, Final Report On Questionnaire On The Use Of Fracture Mechanics Method For The Assessment Of Significance Of Weld Defects, Burdekin, F.M.X-1093-85, Brittle Fracture During Fatigue Loading At -10(C Of A Full-Scale Tubular X-Joint, Nibbering, J.J.W.X-1094-85, Strasbourg Assembly, 1-6 September 1985 - Draft Agenda, Commission X, Anon.X-1095-85, List Of Document Numbers Issued In 1985, Wells, A.A.X-1097-85, Some Comments To Discuss Of The Report Post Weld Heat Treatment Of Steel Structures, Vinokurov, V.A., Chernykh, V.V. and Skvortsova, L.A.

Page 163

X-1098-85, Abstracts List Of Papers On the Application Of Numerical And Mathematical Methods For The Analysis Of Strains, Stresses, And Other Effects Arising At Welding, Vinokurov, V.A. and Ship, V.V.X-1102-86, The Nonlinear Line-Spring Model Method For The Elastic-Plastic Analysis Of Surface Cracks, Xunfang, S. and Jie, N.X-1104-86, Effect Of Specimen Thickness And Local Brittle Zone On CTOD At HAZ Of Weld Joint, Toyosada, M., Nohara, K., Otsuka, T. and Hagiwara, Y.X-1105-86, Development Of WELCON: A Prototype Expert System For Supporting The Determination Of A Welding Condition For Pressure Vessel, Fukuda, S., Maeda, A. and Kimura, M.X-1106-86, Restraint Stresses And Strains Due To Slit Weld In Rectangular Plate -Effective Restraint Intensities Of A Slit In A Thick Finite Plate-, Ueda, Y., Fukuda, K. and Kim, Y.C.X-1107-86, Dynamical Characteristics Of Oblique Y-Groove Weld Cracking Test Specimen Of Arbitrary Thickness, Ueda, Y., Fukuda, K. and Kim, Y.C.X-1108-86, Mathematical Treatment Of Phase Transformation And Analytical Calculation Method Of Restraint Stress-Strain, Ueda, Y., Kim, Y.C., Chen, C. and Tang, Y.M.X-1109-86, The Heat Affect Zone Toughness Of Low Carbon Microalloyed Steels, Thaulow, C., Pauuw, A.J. and Guttormsen, K.X-1110-86, Dynamical Characteristics Of TRC Test And RRC Test, Ueda, Y. and Muramatsu, Y.X-1111-86, A Probabilistic Analysis On Thickness Effect In Fracture Toughness, Minami, F., Toyoda, M. and Satoh, K.X-1112-86, Annual Report Of Working Group On Fracture Mechanics Testing Of Weld Metal/HAZ, Satoh, K.X-1113-86, Guideline For Fracture Mechanics Testing Of WM/HAZ, Satoh, K.X-1116-86, Achievement Of CTOD Requirement For Welded Joints In Offshore Structures, Harasawa, H., Sakurai, T. and Honma, H.X-1117-86, IIW Sub-Commission X-E Annual Report For Tokyo Assembly 1986, Anon.X-1118-86, A Study On Pop-In Phenomenon In CTOD Test For Weldment And Proposal Of Assessment Method For Significance Of Pop-In, Arimochi, K. and Isaka, K.X-1120-86, The Analysis Of Axial Deformation Of Tube Bundle Induced By Internal Bore Welding At Both Ends Of The Bundle, Jing, G.X-1121-86, Thickness Effect On Brittle Fracture Toughness Of Weld Metal Of High Tensile Strength Steel, Kawano, S.-I., Tada, M., Yajima, H. and Nagai, K.-I.X-1122-86, A Study Of Specific Characteristics In Transient Welding Strain-Stress Formation, Guan, Q., Cao, Y., Fu, Y. and Liu, J.X-1125-86, Defect Assessment Of Offshore Tubular Connections, Burdekin, F.M. and Thurlbeck, S.D.X-1126-86, Investigation On Validity Of WES 2805 For Significant Defect Evaluation, Machida,S., Hagiwara, Y., Kajimoto, K. and Yoshinari, H.X-1128-86, Tokyo Assembly, 13-18 July 1986 - Draft Agenda, Commission X, Wells, A.A. and Masubuchi, K.X-1129-86, List Of Document Numbers Issued In 1986, Wells, A.A.X-1131-86, Incentives For Fracture Toughness Testing, Denys, R.X-1132-86, Minutes of Meeting. 15 July 1986, Tokyo, Wells, A.A.X-1134-86, Annual Assembly, Tokyo 1986. Chairman's Report, Wells, A.A.X-1135-87, Thickness Effect In Fracture Toughness Of Steel Welds, Satoh, K., Toyoda, M.

Page 164

and Minami, F.X-1136-87, A Study On The Fracture Toughness (K1d) Through Impact-Fatigue Test At Welded Joints Of 30CrMnSiA Steel, Zhixiong, S. and Weibin, W.X-1137-87, Computation Of The Tensile And Bending Restraint Intensities Of Welded Specimens By Finite Element Method, Zhang, C.X-1139-87, Weld Metal Charpy - CTOD Correlations For Cold Marine Applications, Braid, J.E.M.X-1140-87, The Quality Of Corrosion Resistant Weld Overlays, Veron, P.X-1141-87, The Application Of An Engineering Critical Assessment In Design, Fabrication AndInspection To Assess The Fitness For Purpose Of Welded Products, Anon.X-1143-87, Sofia Assembly, 5-10 July 1987 -Draft Agenda, Commission X, Wells, A.A. and Masubuchi, K.X-1144-87, List Of Document Numbers Issued In 1987, Wells, A.A.X-1147-87, Structural Testing By Wide Plate Test To Be Used In The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The FitnessFor Purpose Of Welded Products, Anon.X-1148-87, Unstable Fracture, Anon.X-1149-87, Service And Technological Requirements For Welded Joints Relative To Continuities, Vinokurov, V.A.X-1155-88, Mechanical Characteristics Of Repair Welds In Thick Plate - Distribution Of Three Dimensional Welding Residual Stresses And Plastic Strains And Their Production Mechanisms, Ueda, Y., Kim, Y.C., Garatani, K. and Yamakita, T.X-1156-88, Finite Element Analysis Of Welding Residual Stress And Distortion, Radaj, D.X-1159-88, Probabilistic Analysis Of Fracture Toughness Of Weld HAZ With LBZ, Minami, F., Toyoda, M. and Satoh, K.X-1160-88, Strength And Fracture Of Alumina FRM, Minami, F., Toyoda, M. and Asahina, H.X-1161-88, Elastic Thermal Stresses Of Bonded Joints Of Dissimilar Materials, Toyoda, M., Komatsu, T., Satoh, K. and Nayama, M.X-1164-88, WELSYS2: An Expert System For Specifying Welding Procedures For A Pressure Vessel, Fukuda, S., Kamio, Y. and Kita, Y.X-1165-88, Determining Residual Stresses By The Hole Drilling Method With Five Or Six Extensometric Band Rosettes, Duran, J., Amo, J.M. and Chao, J.X-1166-88, Experimental Investigation Of Residual Strain Formation, Adamov, R.G., Novopashin, M.D. and Larionov, V.P.X-1168-88, A Study About Bending Behavior And Change Of Residual Stress (Reaction Stress) By Cyclic Bending For H-Type Restraint Specimen., Ogawa, S., Magome, M. and Akami, T.X-1169-88, List Of Document Numbers Issued In 1988, Wells, A.A.X-1171-88, J-Integral And COD In An Overmatched Weld With A Transverse Crack, Chen, B. and Ma, W.X-1172-88, Turbine Rotor Repair/Retire Decision-Making. Fracture Toughness Test Method Development Procedures And Preliminary Results, Fang, H.Z. and Pense, A.W.X-1173-88, Experience In Stress-Relief Heat Treatment Of Welded Structures In Heavy Engineering Industry, Eregin, L.P., Chernykh, V.V. and Vinokurov, V.A.X-1174-88, Validation Of Fracture Analysis Methods Final Report Of The First Phase Of The N.I.L-Fracture Programme, van Rongen, H.J.M.X-1176-88, Computer Modelling Of Transverse Residual Stresses In Repair Welds, Leggatt,

Page 165

R.H.X-1178-88, A J-Integral Analysis Of Cracks In Overmatched Weld Joints, Ma, W., Zhang, S. and Tian, X.X-1181-88, A Statistic Model Of Cleavage Fracture In The Granular Bainite In Welded Zones, Xu, X.X., Cai, Q.G., Su, Y., Hou, C.X. and Ma, W.D.X-1183-88, Minutes Of Meeting Commission X, Wells, A.A.X-1184-88, The Fitness For Purpose Assessment Of Welded Joints With Discontinuities On The Bases Of Fracture Mechanics Criteria, Vinckurov, V.A., Radchenko, L.J. and Aladinsky, V.V.X-1185-88, Annual Assembly - Vienna 1988. Chairman's Report, Wells, A.A.X-1187-88, Application Of Mathematical Methods For Improving The Technology Of Cast Iron Welding, Anon.X-1188-89, Recommendations On Fracture Mechanics Testing, Thaulow, C., Debel, C.P., Sovik, O.P., Wallin, K., Holmgren, M., Olofsson, O. and Andersson, H.X-1189-89, The Crack Compliance Method For Residual Stress Measurement, Cheng, W. andFinnie, I.X-1190-89, Low Stress Non-Distortion Welding -A New Technique For Thin Materials, Guan, Q., Leggatt, R.H., Guo, D.L. and Li, C.Q.X-1191-89, Significance Of Procedure/Evaluation Of CTOD Test Of Weldments, Toyoda, M.X-1193-89, Tempering Effect On HAZ Toughness Of Multi-Layered Welds, Toyoda, M., Minami, F., Yamaguchi, Y., Amano, K. and Kawabata, F.X-1194-89, Helsinki Assembly - 4-9 September 1989 - Draft Agenda, Commission X, Well, A.A. and Masubuchi, K.X-1195-89, List Of Document Numbers Issued In 1989, Wells, A.A.X-1196-89, Report Of Sub-Commission X-E To Commission X For Annual Assembly At Helsinki, Finland, September, 1989, Anon.X-1197-89, The Application Of An Engineering Critical Assessment In Design, Fabrication AndInspection To Assess The Fitness For Purpose Of Welded Products. Part 1 - Chapter 7, Instantaneous Failure, Anon.X-1198-89, The Application Of An Engineering Critical Assessment In Design, Fabrication AndInspection To Assess The Fitness For Purpose Of Welded Products. Part 3, Anon.X-1199-89, Minutes Of Meeting - Annual Assembly, Helsinki, July 1989, Wells, A.A.X-1201-90, Annual Assembly - Helsinki, September 1989. Chairman's Report, Wells, A.A.X-1204-90, Investigation On Fracture Parameters And Assessment Criteria For Welded Pressure Vessels, Lixing, H., Yufeng, Z. and Hongyang, J.X-1205-90, Investigations On Microstructure, Toughness, And Defect Tolerance Of Gas Metal Arc Weld Metal, Varga, T., Konkoly, T. and Straube, H.X-1206-90, A Metallurgical Approach Of The Parameters Affecting The Fracture Behaviour Of Base Metal And Welded Components, Defourny, J., D'Haeyer, R. and Leroy, V.X-1207-90, Fracture Analysis Of Japanese Wide Plate Model Tests. Comparison Of JWES Approach And R6 Approach, Machida, S., Yoshinari, H. and Blauel, J.G.X-1208-90, Probabilistic Aspects Of HAZ CTOD Value Of Multipass Welded Joint Of Steel for Offshore Structure, Machida, S., Toyoda, M., Hagiwara, Y., Yoshinari, H. and Suzuki, Y.X-1211-90, Annual Assembly, Montreal, July 1990. Minutes Of Meeting, Wells, A.A. and Burdekin, F.M.X-1213-91, The Hague Assembly - 1-5 July 1991 - Draft Agenda, Commission X, Burdekin, F.M.

Page 166

X-1214-91, List Of Document Numbers Issued In 1991, Burdekin, F.M.X-1216-91, Effect Of Welding Heat Conditions And Volumetric Thermal Treatment On The Welded Spherical Liquid Ammonia Storage Tanks Stresses State, Korol'kov, P.M.X-1219-91-9(a), Fracture Analysis Of Japanese Wide Plate Model Tests -Comparison of JWES Approach And R6 Approach-<2nd Report>, Machida, S., Yoshinari, H., Hagiwara, Y. and Blauel, J.G.X-1219b-91, Elastic-Plastic Fracture Analysis Of Wide Plate Test With Crack Emanating FromA Hole, Machida, S., Hagiwara, Y., Yoshinari, H. and Shimanuki, H.X-1222-91, Provisional Definitive Statement On The Significance Of Over And Undermatching Weld Metal Strength, Denys, R.X-1223-91, Effect Of Weld Metal Mis-Match On Toughness Requirements: Some Simple Analytical Considerations Using The Engineering Treatment Model (ETM), Schwalbe, K.-H. and Stra(e, M.-P.X-1224-91, Provisional Definitive Statement On Relative Importance Of Residual Stress And PWHT, Burdekin, F.M.X-1225-91, Effect Of Welding Residual Stresses On The Significance Of Defects In Various Type Of Welded Joint - Part Two, Finch, D.M.X-1227-91, Recommendation For PWHT Of Welded Joints In Steel Pressure Vessels And Other Heavy Duty Structures, Anon.X-1231(a)-91, Annual Assembly, The Hague, July 1991. Minutes Of Meeting 2nd July, Burdekin, F.M.X-1237-91, IIW Annual Assembly - The Hague 1991. Commission X - Chairman's Report, Burdekin, F.M.X-1238-92, List Of Document Numbers Issued In 1992, Burdekin, F.M.X-1240-92, Development Of Improved Rolls For The Continuous Casting Of Steel, Papritan, J.C., Tsai, C.L. and Dickinson, D.W.X-1244-92, Revised Definitive Statement On Relative Importance Of Residual Stress And PWHT, Burdekin, F.M.X-1246-92, Provisional Definitive Statement On Significance Of Local Brittle Zones, Francois, D.X-1248-92, Proposal For Collaborative Programme For Materials Selection For Welded Structural Steelwork, Burdekin, F.M.X-1252-92, Heat And Mechanical Treatment Of Welded Joints, Kalna, K. and Malik, K.X-1255-92, Madrid Assembly - 7-11 September 1992 - Draft Agenda, Commission X, Burdekin, F.M. and Francois, D.X-1256-92, Welded Joints With Non-Matching Weld Metal -Crack Driving Force Considerations On The Basis Of The Engineering Treatment Model (ETM), Schwalbe, K.-H.X-1265(a)-92, Annual Assembly - Madrid 1992. Minutes Of Meetings 9th-11th September 1992, Burdekin, F.M.X-1265(b)-92, Assemblee Annuelle - Madrid 1992. Compte Rendu Des Reunions Du 9 Au 11 Septembre 1992, Burdekin, F.M.X-1266-92, IIW Commission X. Chairman's Report 1992, Burdekin, F.M.X-1267-93, List Of Document Numbers Issued In 1993, Burdekin, F.M.X-1268-93, Glasgow Assembly - 28 August-4 September 1993 - Draft Agenda, Commission X,Burdekin, F.M.X-1269-93, Designing Structures Against Brittle Failure, Kalna, K.X-1270-93, Influence Of Mechanical Treatment On Properties Of Welded Joints, Kalna, K.

Page 167

X-1271-93, Potential Of Numerical Analysis Of Weldability In The Design Process, Radaj, D.X-1273-93, Fracture Toughness Evaluation Of Repair Welded Joints For Offshore Application,Rak, I., Kocak, M. and Petrovski, B.X-1274-93, Improvements Of The Methods Given In Eurocode 3, Annex C For The Choice Of Material To Avoid Brittle Fracture: Background And Revised Draft, Sedlacek, G., Dahl, W., Stotzel, G. and Liessem, A.X-1275-93, The Generation Of Residual Stresses Due To Joining Processes, Nitschke, Th. and Wohlfahrt, H.X-1278-93, Prediction Of Toughness Scatter In Heat Affected Zones (HAZ) With Local Approach, Sainte-Catherine, C., Di Fant, M., Duquaire, B. and Balladon, P.X-1279-93, Determination Of Residual Stresses In Submerged Arc Multi-Pass Welds By Means Of Numerical Simulation And Comparison With Experimental Measurements, Roelens,J.B., Maltrud, F. and Lu, J.X-1281-93, Further Aspects Of Selection Of Steels To Avoid Brittle Fractures, Burdekin, F.M.X-1282-93, Draft Definitive Statement On The Significance Of Mis-Match Of Strength In Welds, Burdekin, F.M., Kocak, M., Schwalbe, K.-H. and Denys, R.X-1283-93, Draft Final Definitive Statement On Significance Of Local Brittle Zones, Francois, D. and Burdekin, F.M.X-1284-93, Fracture Of Surface Cracked Undermatched Weld Joint In High Strength Steel, Petrovski, B. and Kocak, M.X-1285-93, Fracture Mechanics And Wide-Plate Tests For Analysis Of Nitrogen And Strain Aging Effects On Weld Metal Fracture Properties, Kocak, M., Petrovski, B., Achar, D.R.G. and Evans, G.M.X-1286-93, Annual Assembly - Glasgow 1993. Minutes Of Meetings 1 -3 September 1993, Burdekin, F.M.X-1287-93, Chairman's Report 1993, Burdekin, F.M.X-1288-94, List Of Document Numbers Issued In 1994, Burdekin, F.M.X-1289-94, Commission X - Structural Performance Of Welded Joints - Fracture Avoidance, Burdekin, F.M.X-1290-94, New Improved Methodology For Selecting Charpy Toughness Criteria For Thin High Strength Steels, Wallin, K.X-1292-94, Position On State-Of-The-Art Document On Weld Mismatch. Draft, Kocak, M.X-1293-94, Definition Of A Materials Data Base For Heavy Structures, Created By Numerical Simulation Of Welding And By Experimental Characterization Of Toughness - Impact Strength, Janosch, J.J., Roelens, J.B. and Koneczny, H.X-1299-94, Influence Of Strength Matching And Crack Depth On The Fracture Parameter For Welded Joints --- Part 2, Tang, W. and Shi, Y.X-1301-94, Effect Of Strength Mis-Match On Fracture Mechanical Behavior Of HAZ-Notched Weld Joint, Minami, F., Toyoda, M., Thaulow, C. and Hauge, M.X-1303-94, Northridge: The Steel Surprise, Anon.X-1304-94, Evaluation Of Fracture Properties Of Cold Deformed 450 YS TMCP Steel, Dobi, D., Kocak, M., Petrovski, B. and Hanus, F.X-1305-94, Ultimate Strength Of Cracked And Uncracked Tubular K Joints, Cheaitani, M.J.X-1306-94, Effect Of Local Strength Mismatch CTOD Toughness In The HAZ Of Steel Weldments, Thaulow, C., Larsen, A., Ranestad, O. and Hauge, M.X-1307-94, Fracture Of Bi-Material Joints: Effect Of Strength Mis-Match On Crack Resistance Curves, Hornet, P., Kocak, M., Cornec, A. and Schwalbe, K.-H.

Page 168

X-1308-94, Assessment Of Eurocode 3 Toughness Requirements, Bannister, A.X-1312-95, List Of Document Numbers Issued In 1995, Garwood, S.J.X-1313-95, Stockholm Assembly -10-17 June 1995 - Draft Agenda, Commission X, Garwood, S.J.X-1314-95, Current Status Of Revisions To PD 6493 Assessment Procedures For Fusion Welded Structures, Phaal, R., Challenger, N.V., Maddox, S.J. and Garwood, S.J.X-1315-95, US Fracture Mechanics Methodologies For Welded Structures, Anderson, T.L.X-1316-95, Approaches To Ductile Fracture Testing And Applications In The USA, Landes, J.D.X-1317-95, Behaviour Of Semi-Elliptical Cracks In Welds With Yield Strength Mismatch, Pisarski, H.G. and Goldthorpe, M.R.X-1318-95, Proposal For Unified Rules For Selection Of Charpy Toughness Criteria For Both Low And Extra High Strength Steels, Wallin, K.X-1321-95, Constraint Effect In Mis-Matching And Its Application To KIc Measurement, El-Shennawy, M., Minami, F., Toyoda, M., Kajimoto, K., Fujii, M. and Murai, R.X-1322-95, Yield Strength Mis-Matching And Fracture Performance Of Girth Welded Joints Of Grade 550 Pipeline Steel, Minami, F., Ohata, M., Toyoda, M., Tanaka, T., Arimochi, K., Glover, A.G. and North, T.H.X-1324-95, Fracture Mechanical Modelling Of Brittle Crack Propagation And Arrest Of Steel, Machida, S., Yoshinari, H., Yasuda, M., Aihara, S. and Mabuchi, H.X-1325-95, A Brief Introduction Of The 3rd Revision Of WES 2805 For Significant Defect Evaluation, Machida, S.X-1328-95, Effect Of Cladding On The Initiation Behaviour Of Finite Length Cracks In A RPV Under Thermal Shock, Blauel, L.G., Hodulak, L., Nagel, G., Schmitt, W. and Siegele, D.X-1331-95, Effect Of Global And Local Strength Mis-Match On Fracture Toughness Of HSLA Steel Weld Joints, Rak, I., Kocak, M., Gliha, V., Gubeljak, N. and Praunseis, Z.X-1332-95, Experimental J Evaluation From A Load-Displacement Curve For Homogeneous And Overmatched SENB OR CCT Specimens, Hornet, P. and Eripret, C.X-1333-95, Contribution To Determining The Requirements For Through Thickness Quality Of Steel Plates, Kalna, K.X-1334-95, Residual Stress And Distortion In Welded Structures: An Overview Of Current U.S.Research Initiatives, Gordon, R.X-1338-96, Document Numbers IIW Issued In 1996, Garwood, S.J.X-1339-96, Budapest Assembly -1996-Agenda, Commission X, Garwood, S.J.X-1341-96, Weld Mis-Match Effect. Sub-Commission X-F: Weld Mis-Match Effect Budapest Assembly - Sept. 1996, Kocak, M.X-1344-96, On The Partial Safety Factors To Be Adopted In Revised Version Of The Japanese Standard On Defect Assessment Methodology WES2805, Machida, S., Miyata, T., Yoshinari, H. and Kaneda, S.X-1345-96, CTOD Evaluation Of A Surface Flaw Located In Highly Strain Concentrated Zone Stiffened Structural Components, Machida, S., Yoshinari, H., Pereira, M. and Morita, A.X-1350-96, Modelling Of Residual Stress And Distortion In Welded Structures: An Overview Of Selected North American Research Initiatives, Gordon, J.R.X-1352-96, X-G The Selection Of Steel And Statistical Approaches Statement, Wallin, K.X-1359-96, An Overview Of Some Current Research On Welding Residual Stresses And Distortion In The U.S. Navy, Blackburn, J.M., Fields, R., Prask, H., Zacharia, T., Winholtz, R., Conrardy, P.C., Kirk, M., Michelaris, A., Hendricks, R., Zhu, Y.Y., Brand, P., Kleinowski, M.,

Page 169

Tims, M., Kahn, L., Cohen, J. and Almer, J.X-1360-96, Cladded Plates Experiments With Defects Under Mechanical Loading, Hodulak, L., Blauel, J.G. and Siegele, D.X-1361-96, Application Of The Local Approach To Cleavage Fracture To Failure Predictions Of Heat Affected Zones, Cardinal, N., Wiesner, C.S., Goldthorpe, M.R. and Bannister, A.C.X-1362-96, Investigations Into The 'Pellini' Drop-Weight Test For Characterising Structural Crack Arrest Behaviour, Wiesner, C.S. and Smith, S.D.X-1363-96, Annual Assembly - Budapest 1996. Minutes Of Meeting 4-6 September 1996, Garwood, S.J.X-1364-96, Chairman's Report 1996, Garwood, S.J.X-1365-97, Document Numbers IIW Issued In 1997, Anon.X-1366-97, 50th Annual Assembly - San Francisco 13-19 July 1997 Agenda, Commission X, Garwood, S.J.X-1369-97, Heat Treatment Influence On Strained State Of Welded Tees And Tee Joints Of Gas Pipelines, Korolkov, P.M.X-1370-97, Analysis Of Some Methods For Reducing Residual Beam Curvatures Due To Weld Shrinkage, Farkas, J. and Jarmai, K.X-1371-97, Evaluation Of Surface Flaws Located In Highly Strain Concentrated Zones Of Stiffened Structural Components Proposals For Revision To BSI PD6493 - CEGB R6, Pereira,M., Machida, S., Yoshinari, H. and Morita, A.X-1372-97, Assessment Of Through-Thickness Quality Of Plates For Welded Constructions, Kalna, K. and Piussi, V.X-1373-97, Contribution To Measurement Of Residual Stresses In Welded Joints - Review Of Vuz Bratislava Activities, Kalna, K.X-1373b-97, Measurement Of Residual Stresses In Welded Joints, Jesensky, M.X-1374-97, Control Of Welding Stress And Distortion For Thin-Walled Components Using Trailing Heat Sink In GTAW, Guo, D.L. and Zhang, C.X.X-1394-97, Effect Of Restraint Degree On The Weld Cracking Susceptibility Of Structural Steels, Youn, G. and Shin, S.B.X-1397-97, X-G The Selection Of Steel And Statistical Approaches. Progress Report For 1996, Wallin, K.X-1401-97, Outline Of Newly Revised Japanese Standard Method For Defect Assessment WES2805-1996 With Some Case Studies, Machida, S., Miyata, T. and Yoshinari, H.X-1404-97, Fundamental Concept Of Fracture Toughness Requirement And Case Studies ForSteel Framed Structures, Toyoda, M. and Shimanuki, H.X-1405-97, Lifetime Considerations Of Dynamically Loaded Components Of Machines, Erlacher, R. and Varga, T.X-1411-98, 51st Annual Assembly - Hamburg. 13-19 September 1998 Agenda, Commission X, Garwood, S.J.X-1412-98, X-Ray Non-Destructive Examination Of Laser- And Electron Beam-Welded Joints, Angelillo, F., Erb, K., Fischer, A., Ratjen, R., Kocak, M., Lippert, P. and Berge, A.S-z.X-1420-98, A Consideration On The Fracture Toughness Master Curve Approach, Mimura, H. and Machida, S.X-1421-98, Fracture Performance Evaluation Of Strength Mis-Matched Welds With Surface Notch, Ohata, M. and Toyoda, M.X-1422-98, Dynamic Strain Aging Sensitivity Of Heat Affected Zones In C-Mn Steels, Wagner,D., Moreno, J.C. and Prioul, C.

Page 170

X-1427-98, Evaluation Of Lamellar Tearing Resistance Of Plates For Welded Structures, Kalna, K. and Piussi, V.X-1429-99, 52nd Annual Assembly - Lisbon Portugal 18-24 July 1999, Garwood, S.J.X-1437-99, Introduction To The European SINTAP Structural Integrity Assessment Procedure,Bannister, A. and Wiesner, C.X-1438-99, 'Pellini' Drop-Weight Testing To Characterise Structural Crack Arrest Behaviour, Wiesner, C.S. and Smith, S.D.X-1439-99, Prior Overload Effects On Structural Integrity And Their Incorporations Into The SINTAP Procedure, Muhammed, A. and Wiesner, C.X-1453-00, Examples Of Risk Analysis Applied To Petroleum Refineries, Based On The Likelihood Of Failure In Plant Units, Lanza, M., Lauro, A. and Pinca, S.X-1454-00, Reliability Of Corroded Piping In Petrochemical Plants Based On Ultrasonic Inspection, Lanza, M., Servetto, C. and Reale, S.X-1463-00, 53rd Annual Assembly - Florence, Italy 9-14 July, 2000. Final Agenda., Garwood, S.J.X-1469-00, Minutes of the Commssion X Meeting Annual Assembly 2000 - Florence, Garwood, S.J.X-1473-01, Effect of Weldmatching on the Strength of the Welded Structures Under Dynamic Loading, Lixing, H.; Yufeng, Z.X-1474-01, Elastic Plastic Fe Analyses Of Sub Models Of Connections In Steel Framed Moment Resisting Buildings Under Earthquake Loading, Burdekin, F.M. and Kuntiyachai, K.X-1474-01, Elastic Plastic FE Analyses of Sub Models of Connections in Steel Framed Moment Resisting Buildings Under Earthquake Loading, Burdekin, F.M.; Kuntiyawichai, K.X-1475-2001-04-26, Creep Crack Growth of High Temperature Weldments, Dogan, B.; Petrovski, B.X-1477-2001, Effect of Strength Mismatch and Dynamic Loading on Criterion for Ductile CrackInitiation, Toyoda, M.; An, G-B.; Ohata, M.; Yoshida, S.; Praunseis, Z.X-1479-2001, Criterion for Ductile Cracking for the Evaluation of Steel Structure Under Large Scale Cyclic Loading, Toyoda, M.; Ohata, M.; Yokota, M.; Yasuda, O.; Hirono, M.X-1481-2001, Fracture of Weld Including Mismatch Effect, Hornet, P.X-1482-2001, Tensile Yield Load Solutions for Centre Cracked Bi-Layer (Cladded) Plates Withand Without Repair Weld, Motarjemi, A. K.; Kocak, M.X-1483-2001, Engineering Critical Assessment to Evaluate Partial Height Hydrotesting of LPG Storage Tanks, Wiesner, C. S.; Pisarski, H. G.X-1484-2001, Contributions on the Lamellar Tearing and Fracture Resistance of Heavy Sections for Use in Seismic Loading Conditions, Lindley, C.; Bateson, P.H.; Bannister, A.C.; Pike, T.J.X-1487-2001, IIW Annual Assembly in Ljubljana; 8-13 July 2001 (Chairman's Report), Kocak, Dr. M.X-1488-2001, Experimental and Numerical Approach on Fracture Behaviour of Four Inches Diameter Carbon-Manganese Cracked Welded Pipes in Four Point Bending, Semete, P.; Faidy, C.; Lautier, J.L.X-1489-2001, Structural Integrity of Bi-Metallic Welds in Piping (Fracture Testing and Analysis), Chas, G.; Faidy, C.X-1493-01, IIW Minutes of the Commission X Meeting (54th Annual Assembly 2001 - Ljubljana), Wiesner, C.S.; Kocak, M.X-1497-2002, Fracture Assessment of a Repair Welded Bi-Material Steel by Defect

Page 171

Assessment Procedure Sintap, Motarjemi, A.K.X-1498-2002, Fracture Path and Toughness in High-Energy Beam Welded Joints of High Strength Steels, Toyoda, M.; Mochizuki, M.; Otata, M.; Yamada, T.; Ishikawa, N.X-1499-2002, Effect of Inter-Pass Temperature on Distribution of Microstructure and Mechanical Properties in Multi-Layered Welded Joints, Yoshiki, M.; Masahito, M.; Masao, T.X-1500-2002, Behaviour of Phase Transformation and Thermal Stress During Welding Heat Cycles, Toyoda, M.; Mochizuki, M.; Matsushima, S.; Zhang, Z.; Gundersen, O.; Thaulow, C.X-1501-2002, Analytical Study on Residual Stress and Microstructures by Repair Welds, Toyoda, M.; Mochizuki, M.; Matsushima, S.X-1502-2002, Residual Stress Reduction by Using Weld Metal Wth Property of Low-Temperature Phase Transformation, Toyoda, M.; Mochizuki, M.; Matsushima, S.; Kubo, T.; Morikage, Y.X-1503-2002, Analytical Study on Deformation and Strength in Haz-Softened Weld Joints of Fine-Grained Steels, Toyoda, M.; Mochizuki, M.; Shintomi, T.; Hashimoto, Y.X-1504-02, IIW Recommendations for assessment of Risk of Fracture in Seismically Affected Moment Connections - A report by the Joint Working Group of Commissions X and XV-G, X-1504-02, IIW Recommendations for Assessment of Risk of Fracture in Seismically Affected Moment Connections (A Report Prepared by the Joint Working Group of Commissions X and XV), X-1504-2002, IIW Recommendations For Assessment of Risk of Fracture in Seismically Affected Moment Connections (A Report Prepared by the Joint Working Group of Commissions X and XV), X-1505-2002, Fracture Behaviour of Mis-Matched Dissimilar Welds: Experimental Results, Martin, G.; Hornet, P.; Kocak, M.; Motarjemi, A.K.X-1506-2002, Fracture Behaviour of Mis-Matched Dissimilar Welds: Numerical Simulation Using Local Approach, Madi, Y.; Besson, J.; Martin, G.; Hornet, P.; Kocak, M.X-1507-02, Mechanical and Fracture Characterization of a Bi-Material Steel Plate, Khodadad Motarjemi, A.; Kocak, M.; Ventzke, V.X-1508-2002, Assessment of Laser Welded Steels Using Structural Integrity Assessment Procedure - SINTAP, Kocak, M.; Motarjemi, A.; Riekehr, S.; Zerbst, U.X-1509-2002, Residual Stress Distributions in Friction Stir Welded AI Sheets Determined by Neutron Strain Scanning, Staron, P.; Kocak, M.; Williams, S.X-1510-2002, The Significance of Softened HAZs in High Strength Structural Steels, Pisarski, H.G.; Dolby, R.E.X-1511-2002, Effect of Strength Mis-Match Weld Metal Portion on Charpy Impact Toughness, Gubeljak, N.; Kocak, M; Predan, J.; Oblak, M.X-1515-02, Analysis of IIW X/XV RSDP Phase I Round-Robin Residual Stress Results, Dong, P.; Hong, J.K.X-1515-2002, Residual Stress Compendium Compilation (Draft Protocol and Call for Participation), Dong, P.; Janosch, J.-J.X-1517-2002, Creep Crack Growth Testing of Weldments, Dogan, B.X-1518-2002, 3D Finite Element Numerical Simulation of Residual Stresses on Electron BeamWelded BT320 Plates, Lixing, H.; Furong, C.; Yufeng, Z.; Li, Z.; Fangjun, L. ; Gang C.X-1519-2002, Comparison of Residual Stresses and Displacements Due to Different Weld Patterns, Enzinger, N.; Cerjak, H.X-1520-2003, Fatigue and Fracture Behaviour of Friction Stir Welded Aluminium Alloy AA6065-T6, Vaidya, W.V., Angamuthu, K., Ventzke, V., Kocak, M., Palm, F.

Page 172

X-1521-2003, Fracture Toughness of STructural Aluminum Alloy Plate Joints by Friction Stir Welding, Toyoda, Mochizuki, Inuzuka and NishidaX-1522-2003, Weld Metal with Property of Low Temperature Phase Transformation for Improving Fatigue Strength by Residual Stress Reduction, Mochizuki, Toyoda, Kubo, and MorikageX-1523-2003, Microscopic Deformation Behaviour Under Laser Welding, Mochizuki and ToyodaX-1525-2003, Distortion Behaviour of Fillet T-joint during In-Process Control Welding by Additional Cooling, Yamasaki, Mochizuki, and ToyodaX-1526-2003, Residual STress in Friction Stir Welded Al Sheets, Staron, Kocak, Williams and WestocttX-1526-2003, Surface Crack Propagation Analysis Under Residual Stress Field, Mochizuki, Miyazaki and ToyodaX-1530-03, Fracture Behaviour Evaluation of 13%Cr Stainless Steels Welded with SAW Process Using CTOD and Wide Plate Tests, Kocak, Segar, Riekehr, Ventzke, dos Santos, Heather, Schaefer, Jochum, HeuserX-1535-03, Residual Stress and Distortion Prediction in Welded STructures (RSDP) - 7th Annual Report, Janosch, Jean Jacques and Gordon, RobinX-1543-03, An IIW Compendium for Residual Stress Distributions: Pipe and Vessel Girth Welds, Dong, P.X-1543-2003, An IIW Compendium for Residual Stress Distribitions: Pipe and Vessel Girth Welds, P. DongX-1545-03, On the influence of short crack behaviour on fatigue strength of butt-welded joints, Chapetti, Belmonte, Tagawa and MiyataX-217-59, Initiation And Propagation Of Brittle Fracture In Welded Steel Plate, Kihara, H., Yoshida, T. and Oba, H.X-218-59, Effect Of Stress Relieving On Brittle Fracture Strength Of Welded Steel plate, Kihara, H., Masubuchi, K., Iida, K. and Oba, H.X-261-61, Effect Of Notch Shape On Brittle Fracture Strength Of Welded Steel Plate, Kihara, H. and Oba, H.X-265-61, A Proposal Concerning Brittle Crack Propagation Test -On The Notch Tensile Test Of Cross Welded Steel Plates-, Oba, H.X-291-62, Recent Studies In Japan On Brittle Fracture Of Welded Steel Structure Under Low Applied Stress Level, Kihara, H.X-331-64, The Welding Residual Stresses For Austenitic Stainless Clad Steel And Some Adequate Measures For Stress Corrosion Cracking, Watanabe, M. and Watanabe, H.X-334-64, On Notch Toughness Of Structural Steel Plates With Special Reference To Propagation-Arrest, Koshiga, F.X-335-64, Residual Stresses In Helical Welded Pipes, Hofmann, W. and Fuss, H.X-336-64, Investigations Into The Reduction Of Residual Welding Stresses By Alternating-Stress Tests Or Mechanical Vibration, Buhler, H. and Pfalzgraf, H.G.X-346-65, Contribution A L'Etude Des Phenomenes De Détente De Plaques En Acier Pour Soudage En Tres Fortes Epaisseurs, Pouillard, E.X-347-65, Contribution A L'Etude De La Relaxation Des Contraintes Dues Au Soudage, Murry,G. and Constant, A.X-350-65, The Growth Of Tendency To Brittle Fracture Of Cold-Worked Steel Aged By The Heat From Welding, Szczecinski, Z.

Page 173

X-371-65, Brittle Fracture Initiation Of Line Pipe, Kihara, H., Ikeda, K. and Iwanaga, H.X-372-66, A Proposal On Evaluation Of Brittle Crack Initiation And Arresting Temperatures And Their Application To Design Of Welded Structures, Kihara, H. and Ikeda, K.X-373-66, On The Low Temperature Ductility And Weldability Of 9% Nickel Steel, Nagashima,S., Ito, T., Sekino, S. and Moriyama, K.X-404-67, The Deep Notch Test And Brittle Fracture Initiation, Ikeda, K., Akita, Y. and Kihara, H.X-405-67, A Proposal On Criteria For Prevention Of Welded Structures From Brittle Fracture, Kihara, H. and Ikeda, K.X-406-67, On The Ductility And Ageing Properties Of 9% Nickel Steel, Aoki, K.X-407-67, Some Opinions On Evaluating Notch Toughness Of Structural Steel Plate, Koshiga,F.X-410-67-E, Fracture Mechanics Considerations In The Charpy Impact Test, Fearnehough, G.D. and Nichols, R.W.X-412-67, Cooperative Study Of Brittle Fracture In Service. Boiler Drum (Whilst Under Hydraulic Test), Anon.X-413-67, Cooperative Study Of Brittle Fracture In Service. Trailer Coupling, Anon.X-414-67, Cooperative Study Of Brittle Fracture In Service. Main Girder Of A Bridge, Anon.X-415-67, Cooperative Study Of Brittle Fracture In Service. Lower Boom Of A Crane, Anon.X-416-67, Cooperative Study Of Brittle Fracture In Service. Thick Walled Pressure Vessel, Anon.X-417-67, Cooperative Study Of Brittle Fracture In Service. Steel Work Of A Furnace, AnonX-418-67, Cooperative Study Of Brittle Fracture In Service. Pressure Vessel, Anon.X-419-67, Cooperative Study Of Brittle Fracture In Service. Strake Of An Oil Storage Tank, Anon.X-420-67, Cooperative Study Of Brittle Fracture In Service. Oil Storage Tank, Anon.X-421-67, Cooperative Study Of Brittle Fracture In Service. Steel Structure, Anon.X-422-67, Cooperative Study Of Brittle Fracture In Service. Gas Pipeline Failure, Anon.X-424-67, Annexe III. Note Sur La Resolution N( 8 - 1966 De La Commission XIII Fatigue Sur Certains Cas De Ruptures Fragiles, AnonX-425-67, Progress Report Of The Working Group Brittle Fracture Tests For Weld Metal (W.G.2912) 1967, van den Blink, W.P.X-431-67, Exhaustion Of Ductility By Hot Straining Or Welding, Decock, J., Stockman, G., Vandersteene, Z., Dechaene, R., Staes, R., Vancrombruggae, R. and Vinckier, A.X-432-67, Initiation Of Brittle Fracture In Structural Steels, Burdekin, F.M.X-438-67, Progress Report Of The Working Group On The Instrumented Charpy V Test Of Commission X Of The I.I.W., Elst, H.C.v.X-453-68, IIS-IIW Sous-Commission X.D. Progress Report - Rapport D'Avancement (1968), Anon.X-454-68, Note For International Institute Of Welding Joint Meeting Commission IX & X, Warsaw, 1968. The Problem Of Cracking During Stress Relieving Heat Treatment, Nichols, R.W.X-502-69, Proposal For The Testing Of Weld Metal From The Viewpoint Of Brittle Fracture Initiation, van den Blink, W.P. and Nibbering, J.J.W.X-504-69, Application Of A New Method Evaluating Tendency To Brittle Fracture Of Steels By Notch Bend Tests, Schmidtmann, E. and Mall, H.-P.X-505-69, The Mechanical Properties Of Heavy Plates Perpendicular To The Rolling Surface

Page 174

In Comparison With The Values In The Longitudinal And Transverse Directions, Dahl, W. and Duren, C.X-507-69, Investigations Into The Strength of Automatically Made Welds Containing Notches, van den Blink, W.P., Dechaene, R., Nibbering, J.J.W. and Soete, W.X-508-69, Effects Of Notch Size, Angular Distortion And Residual Stress On Brittle Fracture Initiation Characteristics Of Welded Joints For High Strength Steels, Kihara, H., Kanazawa, T.,Ikeda, K., Oba, H. and Susei, S.X-509-69, Static Tensile Properties And Brittle Fracture Of Welded Joints Including Soft Interlayer, Satoh, K. and Toyoda, M.X-510-69, Brittle Fracture Of Heavy Steel Members In Room temperature, Kato, B. and Naka, T.X-511-69, Brittleness At Bonded Part Of Deposit Metal By Austenitic Stainless Steel ElectrodeTo The Ferritic Steel Mother Metal, Watanabe, M. and Watanabe, I.X-512-69, Notch Toughness Of Mild Steel Submerged Arc Welds, Hughes, P.C.X-514-69, Interpretive Report On Weld Metal Toughness, Masubuchi, K., Monroe, R.E. and Martin, D.C.X-515-69, Lloyd's Register Of Shipping's Approach To The Control Of The Incidence Of Brittle Fracture In Ship Structures, Buchanan, G., Jensen, C.J.G. and Dobson, R.J.C.X-516-69, Assemblee Annuelle De Kyoto (Juillet 1969). Colloque Sur Les Proprietes Et Les Essais Du Metal Fondu En Relation Avec Les Avaries Des Constructions Dues A La Rupture Fragile, Granjon, H.X-517-69, Influence Of Low Cycle Loading On The Mechanical Resistance Of Steel In the Weld Zone, Serensen, S.V. and Machutov, N.A.X-518-69, Colloquium The Properties And Testing Of Weld Metal In Relation To Structural Failure From Brittle Fracture, Kyoto, July, 1969. Doc.X-518-69. Criteria Of Brittle Fracture Of Welded Joints, Nicolaev, G.A. and Vinocurov, V.A.X-519-69, Study Of C.O.D. Concept For Brittle Fracture Initiation, Kanazawa, T., Machida, S., Momota, S. and Hagiwara, Y.X-520-69, Plastic Deformation Behaviors In The Longitudinally Butt Welded Joints Between High Strength Steels And Mild Steels, Nagai, K-.I., Hotta, T. and Iwata, M.X-521-69, Brittle Fracture Strength Of Welded Joint, Ikeda, K. and Kihara, H.X-522-69, Brittle Fracture Initiation In Unnotched Wide Plate Butt Joint Of 80kg.mm2 Strength Steel, Ogura, N. and Koshiga, F.X-523-69, Residual Stress As A Function Of Stress Relieving Heat Treatment Condition Or 62 kg/mm2 Strength Steel, Tanaka, J.X-524-69, Evaluation Of Weld Metal Resistance Against Brittle Fracture In Connection With Technological Defects, Serensen, S., Girenko, V., Kotenko, E. and Jemchujnikov, G.X-525-69, Weld-Distortion Of Water Turbine Runner Vane Due To Build-Up Welding, Nemoto,T., Watanabe, K. and Kirihara, S.X-526-69, Studies On Restraint Intensity Of Weld Cracking Test Specimens, Fujita, Y., Takeshi, Y. and Nomoto, T.X-527-69, Weld Bond Fracture And A New 80 kg/mm2 High Strength Steel For Submerged Arc Welding, Goda, S., Sato, M., Nakai, T., Ando, A. and Minehisa, S.X-528-69, Mechanism Of Brittle Fracture In Welded Wide Plate, Terazawa, K., Otani, M., Ueda, Y. and Kihara, H.X-529-69, Application Of C.O.D. Concept For Evaluation Of Brittle Fracture Initiation In Residual Stress Field, Akita, Y., Yada, T. and Sakai, K.

Page 175

X-530-69, Study On the Propagation Characteristics Of Brittle Crack In Steel Cumulated With Low Cycle Fatigue, Kurokawa, T., Yajima, H., Nagamoto, R., Yamanouchi, H. and Kinoshita, M.X-531-69, Stress-Relief Cracking In Heat-Affected Zone. The Heat-Affected Zone Cracking In Welded High Tensile Steels Due To Stress-Relieving Heat Treatment Was Studied, Nakamura, H., Naiki, T. and Okabayashi, H.X-532-69, Fracture Behavior Of Several Ferritic Steels And Welded Joints At Room And Low Temperature, Nakamura, H., Naiki, T., Okabayashi, H. and Katayama, N.X-534-69, The Use Of Critical Crack Opening Displacement Techniques For The Selection Of Fracture Resistant Materials, Nichols, R.W., Burdekin, F.M., Cowan, A., Elliott, D. and Ingham,T.X-535-69, The Application Of C.O.D. Measurements To Large Scale Test Behaviour, Cowan, A. and Kirby, N.X-536-69, Effect Of A Heat Treatment In Three Stages On The Mechanical Properties Of Weldable Low-Alloy Steels, Born, K. and Haarmann, K.X-537-69, Strain Concentration During Thermal Stress Relieving, Vinckier, A.X-538-69, The Effect of Crack Length On The Brittle Fracture Of Mild Steel Plates, Dechaene, R. and Beeckman, R.X-539-69, Evaluation Of Weld Metal Resistance Against Brittle Fracture In Connection With Technological Defects, Serensen, S., Girenko, V., Kotenko, E. and Jemchujnikov, G.X-540-69, The Notch Toughness Of MIG-CO2 Weld Metal, Konkoly, T.X-541-69, IIW Sub-Commission X D Progress Report 1969, Schonherr, W.X-544-69, Interactions Of Carbon And Hydrogen On The Brittle Behaviour Of Carbon Steels, Erdmann-Jesnitzer, F.X-547-69, Reheat Cracking In Welded Structure, Nichols, R.W.X-549-69, Stain Formation In Welding Material Of Carbon Steel And The Mechanism Of Fissure Formation In Iron Caused By Hydrogen, Erdmann-Jesnitzer, F.X-551-69, Third Progress Report Of The Working Group On The Instrumented Charpy-V TestsOf Commission X Of The I.I.W, van Elst, H.C.X-552-69, Report On The Current Methods Used In The Assessment Of Weldments For Susceptibility To Brittle Fracture, Anon.X-553-69, Fracture Toughness Testing In Impact, Priest, A.H. and May, M.J.X-565-70, Separating Forces On Edges During Single-Pass Welding Of Heavy Plates, Maeda,T.X-566-70, A Proposed Mechanism Of Brittle Fracture Initiation Influenced By Overstressing Techniques In Terms Of Dugdale Model, Koshiga, F.X-567-70, Effect Of Low Cycle Fatigue On The Brittle Fracture Initiation Characteristics, Kanazawa, T., Machida, S., Yajima, H. and Aoki, M.X-568-70, Decrease In Residual Stress, Change In Mechanical Property And Cracking Due ToStress Relieving Heat Treatment Of HT80 Steel, Tanaka, J.X-569-70, Effect Of Angular Distortion In Welded Joints On Brittle Fracture Initiation, Akita, Y., Maeda, T., Yada, T. and Sakai, K.X-570-70, Stress Concentration Caused By Material Discontinuities And Thickness Discontinuities In A Plate, Yada, T., Sakai, K. and Iino, N.X-571-70, Strength Of Steel Plate With A Soft Interlayer, Hisamitsu, N. and Okuto, K. Anon.X-572-70, Strength of Connection With Heavy Stress Concentration Due To Structural Discontinuities, Hoshino, M., Horikawa, K. and Okumura, T.

Page 176

X-573-70, Studies On Restraint Intensity Of Welding, Fujita, Y., Takeshi, Y. and Nomoto, T.X-575-70, Acoustic Emission From Steel Pressure Vessels, Nielsen, A., Latham, F.G. and Kirby, N.X-576-70, An Assessment Of Brittle Fracture Testing Techniques, Baker, R.G., Dawes, M.G., Dolby, R.E., Egan, G.R., Harrison, J.D. and Saunders, G.G.X-577-70, Brittle Fracture Behaviour Of Welded Joints Including Various Types Of Welding Defect, Kihara, H., Ishii, Y., Koshiga, F. and Fuji, T.X-578-70, Testing Of Weldments Using Standard COD And Niblink Test Pieces, Ingham, T. and Watkins, B.X-580-70, Residual Stresses In Heat-Affected Zone Of Flame Cut Steelplates, Ruge, J.L. and Schimmoller, H.A.X-581-70, A Critical Review Of Two Approaches To The Specification Of Allowable Defect Sizes With Respect Of Brittle Fracture, Harrison, J.D.X-582-70, Notch Ductility, Design And The Specification Of Permissible Defect Sizes In Welded Metal Structures, Wells, A.A.X-584-70, Interpretation Of The Stress Configuration At The Inception Of Brittle Fracture, Gunnert, R.X-585-70, A Survey Of The Studies On Tensile Behaviors Of Composite Weldments, Where Steels Of Different Strength Are Longitudinally Joined, Kanazawa, T.X-586-70, Stress-Wave Characteristics Of Fracture Instability In Constructional Alloys, Hartbower, C.E., Reuter, W.G. and Crimmins, P.O.X-589-70, Cooperative International Study Of Fracture, Other Than Fatigue Fracture In Service. Failure Of A Pipeline During Pressure Test, Anon.X-591-70, Questionnaire On Occurrence Of Brittle And Other Fractures, Anon.X-592-70, Communique Technique. Note Sur L'Adaptation De La Methode Des Implants A L'Etude De La Fissuration Au Cours Du Rechauffage, Granjon, H. and Debiez, S.X-595-70, Acoustic Emissions In The Fracture Toughness Test Of A Mild Steel, Pollock, A.A. and Radon, J.C.X-596-70, Contribution A L'Etude Des Traitements Thermiques Apres Soudage D'Aciers Faiblement Allies, Leymonie, C., Bouverot, R. and Hennion, J.X-597-70, The Strain Aging Embrittlement Of Pressure Vessels In Service And Its Relation To The Behaviour Of Notched Beams, Formby, C.L. and Charnock, Wm.X-613-71, Theoretical Method Of Evaluating Strains And Stresses In The Welding Of Plates, Vinokurov, V.A. and Grigoryanz, A.G.X-617-71, The Effect Of Chemical Composition On Stress Relief Cracking In HT-80 Steels, Nose, J. and Katsube, C.X-618-71, Study On Welded-Type Crack Arrester (First Report), Kihara, G., Kanazawa, T., Ikeda, K., Okabe, T., Nakajima, M. and Yajima, H.X-619-71, A Study On The Brittle Fracture Initiation In The Constrained Structural Member, Kanazawa, T., Machida, S. and Miyata, T.X-620-71, A New Method Of C.O.D. Measurement -Brittle Fracture Initiation Characteristics OfDeep Notch Test By Means Of Electrostatic Capacitance Method-, Ikeda, K., Kitamura, S. andMaenaka, H.X-622-71, The Effect Of Stress-Relieving Heat Treatment On The Mechanical Properties Of Pressure Vessel Steels, Ulff, C.X-623-71, Preliminary Tests In The Use Of Stress-Wave Emission Analysis For The Detection Of Cracking During Welding, Winn, W.H., Sawyer, F.B. and Richards, C.M.

Page 177

X-624-71, The Analysis By Acoustic Emission Of Delayed Cracking, Ruge, J. and Jurgens, V.X-625-71, Effects Of Stress-Relieving Heat Treatment On The Brittle Fracture Initiation In Welded Structures, Koshiga, F., Tanaka, J. and Kurita, Y.X-627-71, Elastic And Plastic Stress Distribution On Base Plates In The Neighbourhood Of Fillet Welds In Lap Joints, Horikawa, K. and Okumura, T.X-628-71, A Study On Crack Opening Displacement And Brittle Fracture Initiation, Fujita, Y., Yada, T., Sakai, K. and Iino, N.X-629-71, Some Experimental Studies On Fillet Weld Lap Joint, Okukawa, A., Horikawa, K. and Okumura, T.X-634-71, On The Brittle Fracture Of Cracked Plates At And Beyond General Yielding, Beeckman, R.X-635-71, Plastic Deformations At Notches In Welds Of Mild Steel Plates, Nibbering, J.J.W.X-636-71, Plastic Deformations At Notches In Welds Of Mild Steel Plates. Part II: Notches In Transverse Welds, Nibbering, J.J.W.X-637-71, The Problem Of Fracture Initiation At An Embrittled Crack Tip, Ku(maul, K. and Hansel, G.X-638-71, Progress Report Of Working Group Reheat Cracking, Vinckier, A.X-645-71, Appreciation De La Resistance A La Rupture Fragile Des Toles D'Acier Par La Mecanique De Rupture, Frederick, G. and Salkin, R.V.X-647-71, Measurements Of Plastic Strains In Transverse Welded Joints Between Mild Steels By The Moire Method, Denys, R.X-649-71, Note Sur Une Nouvelle Methode D'Obtention De Fissures Fines Sur Eprouvettes D'Essai De Fragilite, Granjon, H.X-654-72, Effect Of Restraint Stress And Intensity Of Restraint On Delayed Cracks In the Welds Of 80kg/mm2 High-Strength Thick Plate Steel, Sasaki, H., Watanabe, K., Kirihara, S. and Sejima, I.X-659-72, Recent Trend Of Researches On Restraint Stresses And Strains For Weld Cracking, Satoh, K., Ueda, Y. and Kihara, H.X-660-72, Restraint Intensity Of Weld Joints In The Structural Members Consisting Of Plates And Stiffeners, Satoh, K., Nakajima, H. and Toyosada, M.X-663-72, A Consideration On The Delayed Failure Of Pressure Vessel, Watanabe, M., Yamamoto, S. and Yokoyama, H.X-665-72, Study On The Brittle Fracture Initiation Based On the COD Concept, Kanazawa, T., Machida, S., Itoga, K. and Tsuchiya, H.X-667-72, Effects Of Specimen Size And Loading Condition On The Brittle Fracture Propagation Arrest Characteristics, Kanazawa, T., Machida, S., Yajima, H. and Aoki, M.X-674-72, Heat Affected Zone Cracking In Low Alloy Steels During Stress Relief Heat Treatments, Anon.X-675-72, Residual Stress Analysis Techniques For Weldment Studies - A Summary Of M.I.T.Studies -, Masubuchi, K.X-680-72, Review Of Codes (With Reference To Heat Treatment), Nicholson, S. and Brook, J.C.X-692-73, Finite Element Analysis Of Thermoelastoplastic Deformations In Butt Welding, Masubuchi, K., Andrews, B. and Urushihara, A.X-693-73, On The Upper Limit Of Plate Thickness For Which PWHT Is Not Mandatory, Watanabe, M.X-694-73, Effect Of Fabricating Procedures In Assembling Of Ship Hull Structure On Notch

Page 178

Toughness Of Steel Plates (Report No.1) -Effect Of Welding Superposed On Cold Working-, Kihara, H., Kurokawa, T., Yajima, H., Suhara, J., Kataoka, J. and Fukae, T.X-695-73, Effect Of Fabricating Procedures In Assembling Of Ship Hull Structures On Notch Toughness Of Steel Plates (Report No.2) -Thermoplastic Deformation And Local Brittleness Due To Line-Heating-, Kihara, H., Kurokawa, T., Yajima, H., Suhara, J., Kataoka, J. and Nakajima, M.X-696-84, Effect Of Fabricating Procedures In Assembling Of Ship Hull Structure On Notch Toughness Of Steel Plates (Report 3) -Effect Of Line-Heating Condition On Notch Toughness Of Steel plates-, Kihara, H., Kurokawa, T., Yajima, H., Suhara, J., Kataoka, J. and Fukae, T.X-697-73, A Study On Stress Relaxation Due To Heat Treatment, Fujita, Y., Nomoto, T. and Aoyagi, A.X-698-73, Transient And Residual Stresses In Multi-Pass Welds, Ueda, Y., Takahashi, E., Fukuda, K. and Nakacho, K.X-699-73, 1972-1973 Literature Survey On Welding Stresses And Strains In Japan, Satoh, K., Ueda, Y. and Matsui, S.X-701-73, Brittle Fracture Initiation Characteristics Of Welded Joints For 80 kg/mm2 High Strength Thick Plate Steel, Masaoka, I., Sasaki, R., Yada, M. and Ishihara, M.X-702-73, Study On Evaluation Of Fracture Toughness Of Structural Steels Using COD Bend Test, Kanazawa, T., Machida, S., Hagiwara, Y. and Kobayashi, J.X-705-73, Investigation Of The Relation Of The Relaxation Brittleness Of Low-Alloy Fine-Grained Steel By Simulating The H.A.Z., Ruge, J.L. and Rabe, W.W.X-706-73, Stress Relief Heat Treatments And Their Effect On Mechanical Properties Of Welded Joints, Anon.X-707-73, Thermal Elasto-Plastic Analysis On Stress And Strain In Weld Metal During Multi-Pass Welding, Satoh, K., Seo, K., Iwai, K. and Takahashi, D.X-708-73, A Cooperative International Study Of Fracture Other Than Fatigue Fracture, In BothFabrication And Service. Storage Tank Of Vinyl Chloride Monomer, Anon.X-709-73, A Cooperative International Study Of Fracture Other Than Fatigue Fracture, In BothFabrication And Service. High Pressure Heat Exchangers, Anon.X-710-73, A Cooperative International Study Of Fracture Other Than Fatigue Fracture, In BothFabrication And Service. Orthotropic Floor, Anon.X-712-73, Influence Of Grain Size On the KIC - and COS-Values As A Function Of Temperature, Dahl, W. and Kretzschmann, W.-B.X-714-73, Brittle Fracture Tests For Weld Metal. Progress Report 1973, Nibbering, J.J.W.X-717-73, Heat Affected Zone Cracking In Low Alloy Steels During Stress Relief Heat Treatments, Anon.X-719-73, Influence Of The Welding Process And Steel Yield Point On Residual Welding Stresses, Povazan, J.X-731-74, General Review Of Works In the USSR On Temporary Stresses, Strains And Distortions In Welded Parts, Vinokurov, V.A. and Grigoryanz, A.G.X-732-74, Brittle-Fracture Initiation From Fatigue Cracks In Three-Dimensional Welded Structures, Kanazawa, T., Yajima, H., Sakai, K., Yao, T., Ikeda. K., Hino, T., Aoki, M. and Shirakura, T.X-733-74, On fracture Phenomena Of Aluminum Alloy Weld Metal At Cryogenic Temperature, Nakajima, M., Yajima, H., Saeki, E. and Takeda, Y.X-734-74, Mechanism Of Production Of Residual Stress Due To Slit Weld, Ueda, Y., Fukuda, K. and Low, J.K.

Page 179

X-735-74, Internal Stresses In Thick Plates Weld-Overlaid With Austenitic Stainless Steel, Kume, R., Okabayashi, H., Kamichika, R., Yada, T. and Naiki, T.X-736-74, Determination Of Preheating Temperature For Crack Prevention For High Strength Steel Weld, Watanabe, K., Kirihara, S. and Onuma, T.X-737-74, Progress Report Of The Working Group On Numerical Analysis Of Stresses, Strains, And Other Effects Produced By Welding, Masubuchi, K.X-738-74, Report On the State-Of-The Art Of Numerical Analysis Of Stresses, Strains, And Other Effects Produced By Welding, Masubuchi, K.X-740-74, The Use Of Wide Plate Test Data For Design Against Brittle Fracture, Baker, R.G., Barr, R.R., Gulvin, T.F. and Terry, P.X-741-74, Comparison Of Fracture Toughness Information Derived From The Wide Plate TestAnd The Deep Notch Test, Terry, P.X-742-74, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service, Spherical Pressure VesselX-743-74, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Spherical Pressure Tank, Anon.X-744-74, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Brittle Fracture Of Heat Exchanger Chambers, Anon.X-745-74, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Dechirure D'Une Colonne D'Absorption D'Une Unite De Recuperation De Gaz De Petrole, Anon.X-746-74, A Cooperative International Study Of Fracture, Other Than Fatigue Fracture, In Both Fabrication And Service. Lamellar Tearing In Welded Machine Casing, Anon.X-749-74, Le Soudage Dans Le Monde. Volume 13. No.1/2 1975. Methodes Proposees Pour L'Evaluation Des Defauts Du Point De Vue De La Ruine Par Rupture Fragile / Welding In The World. Volume 13. No.1/2 1975. Proposed Assessment Methods For Flaws With Respect ToFailure By Brittle Fracture, Anon.X-750-74, Testing Techniques To Study The Susceptibility To Reheat Cracking Of Low Alloy Steels, Anon.X-752-74, European Progress Report On Acoustic Emission, Nielsen, A.X-753-74, Acoustic Emission Research In Japan For Flaw Defection In Weld, Onoe, M.X-754-74, Concept Final Report Of I.I.W. Working Group 2912: Brittle Fracture Tests For Weld Metal, Nibbering, J.J.W.X-755-74, Resistance Of Electroslag Welded Plates To Brittle Fracture, Mryka, J.X-757-74, Residual Stresses At Flame-Cut Edges: Influence On Fatigue-Strength, Nibbering, J.J.W. and Vonk, R.X-767-75, Literature Survey Of Strain And Restraint Measurements In Welded Joints, Schofield, K.G.X-773-75, Analysis Of Welding Stress Relieving By Annealing Based On Finite Element Method, Ueda, Y. and Fukuda, K.X-774-75, Strain Criteria For Butt Welds, Soete, W. and Denys, R.X-775-75, Determination Of Local Mechanical Properties In Butt Welds, Soete, W. and Denys,R.X-777-75, The Effect Of Differential Thermal Expansion On Residual Stresses In A Welded Joint, Procter, E. and Beaney, E.M.X-778-75, A Critical Evaluation Of the Centre Hole Technique For The Measurement Of Residual Stresses, Beaney, E.M. and Procter, E.

Page 180

X-779-75, A Preliminary Study On The J-Integral Fracture Criterion, Kanazawa, T., Machida, S., Onozuka, M. and Kaneda, S.X-780-75, On The Transient Stress - Strain During The Seam Welding, Fujita, Y., Nomoto, T. and Ohtsuka, M.X-783-75, 1975 Progress Report On W.G. Static And Dynamic Testing Techniques, Nichols, R.W.X-786-75, Annual Report Of Activities Of The Working Group On Numerical Analysis Of Stresses, Strains, And Other Effects Produced By Welding, Masubuchi, K.X-790-75, Distribution Of The Remaining Ductility Across Welded Joints, Soete, W. and Denys, R.X-797-75, Dynamic Testing- The Proposed Specifications, Anon.X-800-76, Residual Stress Relief And Local Embrittlement Of Weld Heat-Affected Zone In A Reactor Pressure Vessel Steel (SA 533 Grade B Class 1), Kameda, J., Takahashi, H. and Suzuki, M.X-801-76, Nondestructive Estimation Of Residual Stress In Welded Pressure Vessel Steel By Means Of Remanent Magnetization Measurement, Suzuki, M., Komura, I. and Takahashi, H.X-803-76, Study On The Susceptibility To Stress-Relief Cracking Of Low Alloy Steel Weldments By Means Of Slow Tensile Tests And Creep Tests, Ruge, J.L. and Rabe, W.X-804-76, On Transient Stress-Strain Problems During Welding, Fujita, Y., Nomoto, T. and Ohtsuka, M.X-806-76, Mathematical Models Approximating Butt Welding Process - Cause And Prevention Of Hot Cracking, Karlsson, L.X-807-76, Deformation Behaviors And Fracture Characteristics In Plate Containing Two Collinear Notches, Nagai, K.-I. and Kajimoto, K.X-808-76, Studies On Structural Restraint Severity Relating To Weld Cracking In Japan (Preliminary Report), Satoh, K., Ueda, Y., Matsui, S., Natsume, M., Terasaki, T., Fukuda, K. and Tsuji, M.X-809-76, A Study On The Accuracy Of Estimated Residual Stresses By The Existing Measuring Methods, Ueda, Y., Fukuda, K. and Endo, S.X-810-76, A New Measuring Method Of Residual Stresses With The Aid Of Finite Element Method And Reliability Of Estimated Values, Ueda, Y., Fukuda, K., Nakacho, K. and Endo, S.X-811-76, Effects Of Welding Residual Stresses And Initial Deflection On Rigidity And Strength Square Plates Subjected To Compression, Ueda, Y., Yasukawa, W., Yao, T., Ikegami, H. and Ohminami, R.X-812-76, Brittle Fracture Initiation Characteristics Under Bi-Axial Loading, Ueda, Y., Yao, T., Yoshie, T., Ikeda, K., Aoki, M. and Shirakura, T.X-814-76, Fracture Toughness Of Welded Joints By High Heat-Input Welding For 50 kg/mm2- Class High-Tensile Steel Plates, Kanazawa, T., Yajima, H. and Ando, K.X-820-76, Progress Report N(5 June 1976, Vinckier, A.G., Stickler, R., Salkin, R., Hrivnak, I., Bocquet, P., Cheviet, A., Granjon, H., Ruge, J., Kuszmaul, K., Beisswaenger, F., Matsuda, F., Lorenz, M., Price, A., Myers, J., Landerman, E., Scrimgeour, N. and Vesel, S.X-821-76, Probabilistic Fracture Mechanics, Besuner, P.M. and Tetelman, A.S.X-822-76, Formation Of Microcracks During Stress-Relief Annealing Of A Weldment In Pressure Vessel Steel Of Type A508 Cl 2, Liljestrand, L.G., Aucouturier, M., Ostberg, G. and Lindhagen, P.X-837-76, Acceptability Of Defects In Plates Loaded Beyond General Yield, Soete, W. and Denys, R.

Page 181

X-850-77, Multipass Welding Stress In Very Thick Plates And Their Reduction From Stress Relief Annealing, Ueda, Y., Takahashi, E., Fukuda, K., Sakamoto, K. and Nakacho, K.X-852-77, Dynamic Aspects Of Fast Fracture And Crack Arrest, Kanazawa, T., Machida, S., Niimura, Y. and Teramoto, T.X-856-77, Studies On Deformation And Cracking In One Sided Welding, Satoh, K., Ueda, Y., Maeda, T., Yada, T. and Kamichika, R.X-861-77, Microstructural Gradient In HAZ And Its Influence Upon Toe HAZ Fracture Toughness, Chung, S.-H., Takahashi, H. and Suzuki, M.X-864-77, A Cooperative International Study Of Fracture, Other Than Fracture Fatigue, In Both Fabrication And Service. Cylindrical Pressure Vessel, Anon.X-865-77, A Cooperative International Study Of Fracture, Other Than Fracture Fatigue, In Both Fabrication And Service. Fracture Of The Two Unpartitioned Hinge-Plates Of A Grab, Anon.X-866-77, A Cooperative International Study Of Fracture, Other Than Fracture Fatigue, In Both Fabrication And Service. Report Of Sub-Commission X D, Anon.X-867-77, Desirability Of Post-Weld Heat Treatments In Welded Construction, Anon.X-881-78, Proposed Method For Instrumented Precracked Charpy-Type Tests, Varga, T., Junker, M., Njo, D.H. and Prantl, G.X-882-78, Test Procedure For C.O.D. (Crack Opening Displacement) Determination, Varga, T., Prantl, G. and Njo, D.H.X-888-78, Destructive Tests On Pressure Pipes At Low Temperatures, Larionov, V.P., Grigoriev, R.S., Novopashin, M.D., Lyglayev, A.V., Gulayev, V.P. and Aprosimov, V.S.X-889-78, Paper: Investigation On the Susceptibility Of Reactor Vessel Welds To Hydrogen-Induced Brittle Failure, Mazel, R.E., Khromchenko, F.A., Grinenko, V.G. and Kuznetsova, T.P.X-890-78, A Mathematical Two-Dimensional Model Of The Residual Stresses In A Welded Plate, Sekine, H. and Takahashi, H.X-891-78, Relation Between The Surface Roughness And The Residual Stress Of Bag-8 Brazed Steel Joint, Suezawa, Y.X-892-78, Residual Stresses In Thick Weldments- A Review Of Contemporary Measurement Techniques, Parlane, A.J.A.X-893-78, Prospects Of Computer Application For Calculating The Strength Of Welded Structure Elements, Makhnenko, V.I.X-894-78, Statistical Investigation On V-Notch Charpy Impact Data On Structural Steels And Their Welded Joints, Kanazawa, T., Yajima, H. and Kawano, H.X-895-78, On The Estimation Of The Probability Distribution Function Of Defect In A Structure,Itagaki, H., Ozaki, F. and Nemoto, T.X-896-78, Structural Deflections Due To Welding, Wan, Y.L., Bibby, M.J. and Goldak, J.A.X-897-78, Effect Of Electrode And Base Metal Strength On Structural Deflections Due To Welding, Wan, Y.L., Bibby, J.A. and Goldak, J.A.X-898-78, Comparison Of Different Calculating Procedures For Determination Of COD At Crack Tip, Dahl, W. and Zeislmair, H.-C.X-901-78, Etude Critique De La Methode De L 'Ecartement De Fissure (C.O.D.), Amiot, P., Bergez, D., Beudet, Boissenot, J.M., Bonnin, P., Bramat, M., Bui, H.D., Cabedoce, D., Delevoy, Dollet, J., Doucet, J.P., d'Escatha, Y., Francois, D., Labbens, R., de Leiris, H., Leymonie, C., Marandet, B., Miannay, D., Meune, J.P., Pelissier Tanon, A., Pineau, A., Pluvinage, G., Radenkovic, D., Rousselier, G., Sanz, G., Sebbah, M., Tissot, J.M. and Trican,

Page 182

M.X-902-78, Experimental Determination Of Stress Intensity Factor For A Part-Through Thickness Crack, Suzuki, M., Takahashi, H. and Saito, M.X-905-78, Progress In Elastoplastic Fracture. Mechanics, Anon.X-907-78, Developments In Pressure Vessel Technology-1, Nichols, R.W.X-908-78, Fillet Welds Strain Stress State Investigation By The Finite Elements Method, Vinokurov, V.A. and Kurkin, A.S.X-909-78, Strains And Stresses Kinetics Investigation In Consideration Of Basic Physical Processes Under Welding, Grigoryanz, A.G.X-910-78, Notation System Of Joint Restraint Severity, Satoh, K. and Matsui, S.X-911-78, Statistical Investigation On V-Notch Charpy Impact Data On Structural Steels And Their Welded Joints, Kanazawa, T., Yajima, H. and Kawano, H.X-912-78, On The Estimation Of The Probability Distribution Function Of Defect In A Structure,Itagaki, H., Ozaki, F. and Nemoto, T.X-913-78, Working Group Thermal Stress Relief Final Report, Constant, A., Carter, Caubo, Gillemot, Haneke, Larson, Liedke, Pense, Sterner, Varga, Vinckier, Watanabe and Bernard.X-914-78, Improvement Of Ductility Of Heat Affected Zone By Vibration In Steels Susceptible To Reheat Cracking, Rak, I.X-920-79, Critical, Tolerable Or Acceptable Defects, Soete, W. and Denys, R.X-921-79, Full And General Yield Behaviour Of Homogeneous Plates With Cracks, Soete, W. and Denys, R.X-922-79, Interpretation Of The Wide Plate Tension Test At Fuel And General Yield, Soete, W. and Denys, R.X-923-79, Deformation Patterns And Fracture Locations Of Defect Free Butt Welds Loaded In Tension, Soete, W. and Denys, R.X-924-79, The Full And General Yield Condition Of Butt Welds Loaded In Tension-Theoretical Approach, Soete, W. and Denys, R.X-925-79, Experience From Testing Butt Welds With Cracks In The Weld-Gross Strain Approach, Soete, W. and Denys, R.X-926-79, Thermal Stress Analysis Based On Initial Strain Method, Fujita, Y., Nomoto, T. and Hasegawa, H.X-927-79, A Method Of Measuring Triaxial Residual Stress In Heavy Section Butt Weldments, Takahashi, E., Iwai, K. and Satoh, K.X-929-79, Residual Stress And Distortion In Cylindrical Shells Caused By A Single-Pass Circumferential Butt Weld. -A Discussion With Approximate Calculation Method, Guan, Q. and Liu, J.D.X-930-79, The Determination Of The Plane Strain J-Integral Crack Extension Resistance Curve, Ligeng, L., Qigong, C., Huiwang, S. and Degen, W.X-931-79, Detection Of Thermally Strained Plastic Zone In Weld Joint Of Type 304 Stainless Steel, Lino, Y., Shoji, T. and Suzuki, M.X-933-79, The Investigation Of High Strength Structural Steel In Reference With Susceptibility To The Stress-Relief Embrittlement, Velikonja, M.X-935-79, Reactor Surveillance Test And Fracture Mechanics Evaluation Of Safety Margin ForNeutron-Irradiated Pressure Vessels, Takahashi, H., Saito, K., Shoji, T., Date, K. and Suzuki, M.X-953-79, Fracture Mechanics Approach To Hydrogen-Induced Embrittlement Of High Strength Steels, Urednicek, M.

Page 183

X-955-80, Metal Properties Complex Characteristics Under Welding Thermostrained Cycles, Grigoryanz, A.G.X-956-80, Investigations On Elastic-Plastic Fracture Behaviour And Slow Stable Cracking Of Welded And Weld Simulated HAZ-Structures Of St E 460, Ruge, J.L. and Winkelmann, O.X-957-80, Some Observations On C.O.D.-Testing (With Particular Reference To IIW-DOC. X-901-78), Nibbering, J.J.W.X-961-80, Note On The Application Of The Elastic-Plastic Fracture Mechanics To The Prediction Of Fast Fracture Of Welded Structures, Anon.X-962-80, Slow Stable Crack Growth And Instability, Francois, D.X-964-80, Fragilisation Et Fissuration Au Rechauffage D'Aciers Soudes, Chilque, A.R.A.X-965-80, Crack Propagation In Welded Nozzle Connections Under Low-Cycle Fatigue, Lukyanov, V.F. and Naprasnikov, V.V.X-971-80, Some Remarks About Measurements Of COD At Initiation On Steels Exhibiting Delaminations, Farsetti, P. and Bufalini, P.X-981-81, Effect Of Random Deviations Of Input Variables On Welding Distortions In T-Beams, Makhnenko, V.I., Kasatkin, O.G., Pivtorak, N.I. and Pochinok, V.E.X-982-81, The Size Effect On The Brittle Fracture Toughness Under The Large Scale Yielding, Nagai, K.-I., Shimizu, S., Iwata, M. and Kawano, S.-I.X-983-81, Bendability And Fatigue Strength Of Shell-To-Annular Fillet Welded Joint In Large Oil Storage Tank, Uchida, M., Naitoh, K. and Yoshida, K.X-984-81, Study On Brittle Crack Propagation And Arrest Behaviour In Plates And Beams Structures, Kanazawa, T., Machida, S., Yajima, H. and Kawano, H.X-985-81, Welding Deformation And Residual Stresses Due To Circumferential Welds At The Joint Between Cylindrical Drum And Hemispherical Head Plate, Fujita, Y., Nomoto, T. and Hasegawa, H.X-986-81, Evaluation Of The Defects Danger In Consideration Of Dynamic Resistance Of Metals To Fracture, Vinokurov, V.A.X-987-81, New Measuring Method Of Three Dimensional Residual Stresses Based On TheoryOf Inherent Strain, Ueda, Y., Fukuda, K. and Tanigawa, M.X-989-81, Theory Of Thermal Elastic-Plastic Analysis With A More General Workhardening Rule, Ueda, Y. and Nakacho, K.X-990-81, Ultimate Strength Of A Rectangular Plate Under Thrust -With Consideration Of The Effects Of Initial Imperfections Due To Welding-, Ueda, Y. and Yao, T.X-991-81, List Of Published And Current Works In Japan On Welding Stresses, Strain, Deformations Etc., Satoh, K.X-992-81, An Inter-Laboratory Programme Of Dynamic Fracture Toughness Tests, Christopher, P.R., Formby, C.L., Cannon, D.F., Jones, C.H., Kamath, M.S., Lees, G.M., McNicol, D.T.W., Milne, D., Priest, A.H., Shanahan, M.W., Turner, C.E. and van der Veer, P.A.J.X-997-81, Some Aspects Of The Critical Examination Of Cracks In Welds And HAZ By Means Of Fracture Mechanics, Ruge, J.L. and Winkelmann, O.X-999-81, The General Yielding Criterium, Soete, W. and Xing, H.L.X-D-89-76, Bibliography On Cases Of Failure - Example Of A Case Description -, Piehl, K.-H.X-D-91-77, Failure Of Large Pressure Vessel On Hydraulic Pressure Test, Anon.X-F-015-94, Weld Mis-Match Effect. Proceedings Of The Intermediate Meeting Of The IIW Sub Comm. X-F 28-29 April 1994, Paris, Kocak, M.X-F-030-95, Weld Mis-Match Effect. Proceedings Of The Second Intermediate Meeting Of

Page 184

The IIW Sub Comm. X-F 24 April 1995, GKSS Research Center, Kocak, M.XI-102-63, Recommended Welded Connections For Pipework / Assemblages Soudes Recommandes Pour Tuyauteries, Anon.XI-110-64, Essais Sur Tubulures Inclinees, Heirman, J. and Stockman, G.XI-121-65, Fundamentals Of Pressure Vessel Design, Bottema, M.J.XI-125-65, Recommended Welded Connections For Pressure Vessels, Gardner, E.P.S., Bottema, M.J., Brath, P., Cotton, H.C., Gerbeaux, H., Herpol, G.A., Jonnerby, E., Koch, B., Kooistra, L.F., Rudowski, S., Santini, W., Stagge, G. and Brown, R.M.XI-139-65, Methode De Cacul Des Soudures De Fixation Des Piquages Sur L'Enveloppe Des Recipients A Pression, Anon.XI-140-65, Groupe De Travail: Relaxation Des Contraintes, Murry, G. and Constant, A.XI-141-65, On The Evaluation Of Ductility Of Weld Metals For Low Temperature Application, Kihara, H., Kanazawa, T. and Itagaki, H.XI-144-65, Chemical Composition And Mechanical Properties Of Representative Quenched And Tempered Steels In Japan, Anon.XI-145-65, Representative Products Made From Quenched And Tempered Steels In Japan, Anon.XI-154-66, Experimental Study On Lining Titanium To Steel By Resistance Spot Welding Method, Nishio, Y., Yamamoto, Y., Fukaya, Y. and Masushige, M.XI-155-66, Recommendations For Arc Welding Joints In Clad Steel Construction, Anon.XI-169-67, Strength In Biaxial Tension Of Welded Joints In Heat Treated Steels, Kuzmak, E.M., Shcheglov, B.A. and Bakiev, A.V.XI-180-67, Liaison Between Sub-Commission V-F And Working Group XV Concerning The Study Of Acceptance Criteria For Welds, Pintelon, M.XI-196-68, Les Phenomenes Intervenant Dans Les Parois Multicouches Des Recipients Emboutis A Haut Pression, Kamocki, H.XI-206-68, The Advanced Method Of Fabricating and Welding Of Sphere Tanks And Gasholder Shells, Lebedev, B.F. and Krivoshey, V.S.XI-213-68, Overstressing As A Means Of Reducing The Risk Of Subsequent Brittle Failure. Additional Comments Up To July, 1968, Nichols, R.W.XI-217-68, Experience With 9% Nickel Steel For Low-Temperature Containers, Ebert, K.A. and Windgassen, K.-F.XI-221-69-E, Austenitic Stainless Steels With High Yield Strength, Johansson, J.I.XI-224-69, Rapport D'Activite Du Groupe De Travail Relaxation Thermique Des Contraintes, Gerbeaux, H.XI-227-69, Short Survey Of Progress In I.S.O On Achieving The Rules For Construction Of Unfired Pressure Vessels -Section Welding-, De Bruin, L.H.XI-229-69, Commission XI - Groupe De Travail Essais Non Destructifs Reunion A Bruxelles Les 18/20 Juin 1969, Goethals, J.XI-233-69, Short Report Of ISO/TC 11/SC 2 - Boilers And Pressure Vessels, Design Of Pressure Parts. Meeting In Lisbon, October 1969, Berglund, I.XI-236-70, Short Report Of Plenary And Subcommittee 2 Meetings Of ISO/TC 11 In Stockholm, 13-22 April 1970, Berglund, I.XI-238-70, Report On Weldability Of Line Pipe Steels And Welding Materials For Pipeline Welding, Mikami, H., Narita, K. and Koshiga, F.XI-239-70, Bursting Test Of 80kg/mm2 High Tensile Steel Pressure Vessel Made By New Electroslag Welding Method - HINES Welding -, Okumura, T., Terazawa, K., Nakai, T., Ando,

Page 185

A., Minehisa, S., Kaneko, S., Goda, S. and Sato, M.XI-240-70, Final Reply By Commission V To Commission XII On The Non-Destructive Testing Of Welds In Pipelines Made By The CO2 Process, Anon.XI-241-70, Acceptance Levels For Defects In Fusion Welds (A Statement Of Philosophy), Anon.XI-242-70, Sub-Commission XI B Calculation Of Weld Dimensions, Bottema, M.J.XI-251-70, The Fatigue Behaviour Of Welded Pipes Under Combined Pulsating Stresses In Relation to The Angle Of Inclination Of Weld Seam, Wellinger, K., Gassmann, H. and Zenner, H.XI-252-71, Measuring Out-Of-Roundness Of Cylindrical Vessels, Nilsson, J.S.XI-254-71, Comportement Mecanique Des Aciers Intoxydables Austenitiques Et Bases De Cacul Pour Les Apparels A Pression Soudes, Decroix, J., Guenot, R. and Pruszowski, A.XI-255-71, Essential Data Of Strain (Stress) Measurements On Pressure Vessels, Anon.XI-282-73, Working-Hardening Of Austenitic Steel As Element In Pressure Vessel Design (4th Edition) / L'Ecrouissage De L'Acier Austenitique, Element Du Calcul Des Appareils A Pression (4eme Edition), Anon.XI-283-73, Studies Of Overlaid Cladding In A Nuclear Reactor Vessel, Inagaki, M., Fujimura, T. and Kodaira, T.XI-286-73, Commission XI, Sub-Commission A - Weld Details Suitability Grading, Anon.XI-289-73, Report Concerning The Post-Weld Heat Treatment For Pressure Vessels, Gerbeaux, H.XI-290-73, Welding Of Clad Steels In The Czechoslovak Pressure Vessel Industry, Makovicky,V.XI-293-74, Fundamental Studies Of MIG Girth Welding Underwater -MIG Welding In The Dry Environment Of An Ambient Pressure Chamber-, Ito, Y., Koizumi, I., Yamauchi, N. and Kohyama, A.XI-294-74, Automatic Welding Method Of Branch Pipe Joint In Ship Pipe Line, Kawai, H., Takeda, H., Ueda, M. and Nagatomi, S.XI-295-74, Plasma Arc Welding Of Pipelines-Study On Welding Condition Of Horizontal Fixed Joints Of Mild Steel Pipes-, Narita, K., Takagi, K., Kimura, T. and Mitsui, A.XI-296-74, Report Of Sub-Commission XI B (April 1974, Paris), Bottema, M.J.XI-297-74, Inspection Schedule For Field Welding Of Pipelines, Anon.XI-298-74, Chairman's Report For 1973/1974, Lane, P.H.R.XI-301-74, Traitement Des Appareils A Pression Apres Soudage, Gerbeaux, H.XI-304-74, Non-Destructive Testing By Ultrasonics Of Circumferential Welds In Transmission Pipe Lines, Anon.XI-312-75, Report Of Sub-Commission XI B (April, May 1975, Berkeley), Bottema, M.J.XI-313-75, Project Proposed To The Members Of Working Group Postweld Mechanical And Heat Treatments. Advisability Of Resorting To Heat And/Or Mechanical Treatments Applicable To Pressure Vessels Following Forming And Welding, Anon.XI-316-75, Calcul Des Recipients A Pression Cylindriques A Fond Plat Soude, En Faisant Intervenir La Plastification Au Traitement Hydraulique D'Epreuve Et De Conformation, Puis Le Contraintes Residuelles Jouant Role De Precontraintes Pour Un Service Ulterieur Elastique, Bramat, M., Gerbeaux, H. and Vix, J.M.XI-317-75, The Influence Of Stress Relief Heat Treatment On Pressure Vessels Made In Fine Grain MnVN Steel, Makovicky, V.XI-320-76, Mechanized Welding System And Joint Properties For Offshore Pipeline Laying,

Page 186

Narita, K., Jimbo, S.-I., Takagi, K., Kimura, T. and Gunji, K.XI-323-76, Fillet Weld Dimensioning In Pressure Vessels. Situation Report, Anon.XI-327-76, Qualification Of Welders For Steel Pipe-Line Construction Manual Metal Arc Welding With Covered Electrodes, de Hertogh, J.XI-334-77, A New Welding System For 9%Ni Steel Tank Shell Plate, Takagi, K., Mimura, M., Kimura, T., Ikoma, T. and Kaneyama, K.XI-346-78, Application Of Rotating Arc Welding To Small Pipelines, Mimura, M., Kimura, T., Gunji, K. and Sato, S.XI-349-78, General View About AD-Specifications, Pressel, K.XI-355-79, Welded Connections For Pressure Vessels, Anon.XI-356-79, Amendments To The Documents XI-355-79 (XI A-4-78) and XI-362-79 (XI A-3-78), Anon.XI-357-79, Fabrication Of Steel Vertical Cylindrical Tanks By The Method Of Coiling, Novikov, V.I., Colin'ko, V.M., Popovskii, B.V., Ritchik, G.A., Tomling, Yu.R. and Beloyev, M.G.XI-359-79, A Study Of Construction Parameters And Their Influence On Pipeline Manual Welding With Coated Electrodes, Minkiewicz, E.A.XI-361-79, Brittle Failure Of 700 mm Diameter Gas Pipeline, Makovicky, V.XI-362-79, Supplement To Doc.IIW/IIS-237-66. Recommended Welded Connections For Pressure Vessels Parts 5, 8, 9, 10, Makovicky, V.XI-369-80, Summary Of Aspects Specific To Layered Pressure Vessel Construction With Special Reference To Welding, Tschiersch, R. and Labbens, R.XI-370-80, Derivation Of Design Rules For Pressure Vessels, Harrison, J.D. and Maddox, S.J.XI-373-80, The Use Of CEq (Carbon Equivalent) As An Acceptance Criteria In Line Pipe Steel Specifications, Anon.XI-374-80, Weld Efficiency, Reliability And Classes Of Weld Joints (Philosophy On Weld Efficiencies), Lukacevic, Z.XI-379-81, Investigation Of Weldability And Development Of Welding Technology Of Girth ButtJoints, Rakhmanov, A., Sbarskaya, N. and Neifeld, O.XI-382-81, Application Of Rotating Arc Butt Welding To Town Gas Pipelines, Takagi, K., Arakida, F., Sato, S., Miyamori, H. and Ozawa, M.XI-384-81, Welding Research Program For The Eighties, Lukacevic, Z.XI-386-81, Bendability And Fatigue Strength Of Shell-To-Annular Fillet Welded Joint In Large Oil Storage Tank, Uchida, M., Naitoh, K. and Yoshida, K.XI-388-81, Suitability Grading. Supplement To Document XI-388-81 Welded Connections For Pressure Vessels, Makovicky, V.XI-389-81, Post Weld Heat Treatments Of Pressure Vessels, Anon.XI-397-82, Repair Of Corroded Pressure Vessels By Overlay Welding, Ivens, P.F. and Tromp, A.P.M.XI-398-82, Quality Control And Quality Assurance Of Welding Related Operations, Narita, K.XI-402-82, Theoretical And Experimental Basic Conceptions Of Fracture Design On Unstable Crack Propagation In Pressure Pipelines, Vinokurov, V.A and Makarov, G.I.XI-403-82, In The CEq (Carbon Equivalent) Useful As An Acceptance Criteria In Line Pipe Steel Specifications?, Anon.XI-404-82, Characteristics Of Quality Control Of Boilers And Pressure Vessels In Japan, Tomita, T. and Takemi, K.XI-406-82, About Weldability Criteria Of Steels With Polymorphic Transformations, Golovanenko, S.A. and Frantov, I.I.

Page 187

XI-411-83, Alignment, Welding And Quality Control Of Pipeline Welded Joints (USSR). Standards And Code, Anon.XI-419-83, Base Plate, Pipe And Weldment Properties Of Controlled Rolled Niobium Steels, Golovanenko, S.A., Gray, J.M., Frantov, I.I. and Heisterkamp, F.XI-420-84, Postweld Heat Treatments Of Pressure Vessels, Anon.XI-424-85, Pressure Vessels Containing Anhydrous Liquid Ammonia, Anon.XI-425-85, Report On The Results Of The Questionnaire Given By The Chairman Gerhard E. Stahl, Anon.XI-426-85, Welding Engineering In Systems Construction, Herbert, E.D.Z. and Helmut, H.W.XI-427-84, Shapes And Coalescence Of Surface Fatigue Cracks, Iida, K.XI-429-83, Metallurgy Of Heat Treatment Of Welded Joints, Hrivnak, I.XI-432-85, Comparison Between Imperfection Sizes In National Standards And Codes For On Shore Pipeline, Anon.XI-434-83, Prevention Of Lamellar Tearing In Welded Steel Fabrication, Anon.XI-434-85, Prevention Of Lamellar Tearing In Welded Steel Fabrication, Anon.XI-435-85, Welding Of Multilayer Pipes In Their Manufacture And Construction Of Highpressure Gas Pipeline, Paton, B.E., Biletskii, S.M., Rybkov, A.A., Zaitsev, K.I., Mazel, A.G. and Shmeleva, I.A.XI-436-85, Commission XI - Documents (Updated June 1985), Anon.XI-437-85, Agenda Annual Meeting. Strasbourg, September 1985. Draft, Stahl, G.E.XI-438-85, Annual Report 1984 - Boston Meeting, Stahl, G.E.XI-439-85, Procedure For Residual Life Determination In The Netherlands, Kornalijnslijper, M.XI-441-85, Report From SC XI-E Transmission Pipelines, Scopesi, L.XI-442-85, Annual Report 1985 Of The Working Group Creep Of IIW-Commission IX, Vaessen, G.XI-443-85, Annual Report 1985, Stahl, G.E.XI-444-85, Status Report Of The Working Group Influence Of Stress Relief Heat Treatment OfCommission IX and X - 1985, Hrivnak, I.XI-446-86, Progress Of Chemical Plant And Material/Welding Technology In Japan6, Watanabe, M.XI-447-86, Study Of Explosion Welding Of Tube Plate For Heat Exchanger, Watanabe, M., Murakami, Z., Minakuchi, K., Kubota, A., Mine, T., Tanioka, S. and Noto, Y.XI-447-86, Study Of Explosion Welding Of Tube To Tube Plate For Heat Exchanger, Watanabe, M., Murakami, Z., Minakuchi, K., Kubota, A., Mine, T., Tanioka, S. and Noto, Y.XI-448-86, Agenda Annual Meeting Tokyo, July 86. Draft, Stahl, G.E.XI-450-86-E, Narrow Joint/Narrow Gap SAW Of Big Structural Members For Drilling Platforms,Almqvist, G., Ruegenberg, A., Strijbos, J. and Wittung, L.XI-451-86, Survey Of Domestic And Foreign Pipeline Weld Discontinuity Acceptance Standards, Shmelyova, I.A.XI-455-86, G.T.A.W. Process With Dual Shield Gas (Intermediate Process Between G.T.A.W. And Plasma Arc Welding), Anon.XI-456-86, Shape Welding. The Current State Of The Art In The Federal Republic Of Germany, Gnir(, G.XI-457-86, The Modelling Of Electrical Current NDT Methods And Its Application To Weld Testing, Becker, R., Betzold, K., Boness, K.D., Collins, R., Holt, C.C. and Simkin, J.XI-459-86, The Fusion And Heat-Affected Widths Of Electron Beam Welds, Bibby, M.J., Goldak, J.A. and Mehrotra, V.

Page 188

XI-460-86, Evaluation Of National Pressure Vessel Codes, Anon.XI-461-86, Development And Application Of All-Position Automatic GMA Welding Procedure For Main Steam Piping Of Thermal Power Plant, Yahata, H., Maruoka, K., Hoshino, H., Kamo,K. and Nagura, Y.XI-462-86, Development Of Arc-Welding Robot For Nozzle Of Boiler Drum, Wakamatsu, K., Shimoyama, H., Shirouzu, K., Ono, H., Abe, T. and Izunami, K.XI-465-86, Guide To The Welding And Weldability Of CrMo And CrMoV Heat Resisting Steels,Anon.XI-466-86, Fatigue Of Welded Components And Structures / Fatigue Des Elements Et Constructions Soudees, Maddox, S.J.XI-467-86, Welding Of Pipelines For The Transport Of Active Corrosive Media With High Hydrogen Sulphide Content, Mazel, A.G., Golovin, S.V., Stromova, R.P. and Klimova, N.I.XI-468-86, Influence Of Shielding Gas Composition On GMAW Of Stainless Steel, Quintino, L.and Oliveira Santos, J.F.XI-475-87, Proposals For Application Of New Welding Techniques In Pipeline Construction, Anon.XI-476-87, Application Of ECA (Engineering Critical Assessment) In The Evaluation Of Defect Tolerance In Girth Welds In API 1104, BS 4515 And CSA Z184, Re, G.XI-477-87, Considerations Of Welding Methods Adopted On Pipelines During Operation (With Questionnaire On Welding Of Pipelines Under Pressure), Lamberts, G.XI-478-87, Materials In Power Plant Construction, Schoch, W., Kautz, H.R. and Zuern, H.E.D.XI-479-87, Damage Examples And Lessons From Power Plant Engineering, Kautz, H.R. and Zuern, H.E.D.XI-480-87, Vibration And Vibratory Stress Relief. Historical Development, Theory And Practical Application, Gnir(, G.XI-481-87, Local Heat Treatment By Induction, Muller, H.H.XI-482-87, Agenda Annual Meeting Sofia, July 1987, Draft, Stahl, G.E.XI-485-87, Commission XI-Documents (Updated 15th Of May 1987), Anon.XI-487-87, Comments On The IIW Document XIII-1215-86 Fatigue Design Rules For PressureVessels, Maddox, S.J.XI-488-87, Welding Duplex Stainless Steel Pipes, Perteneder, E., Tosch, J., Reiterer, P. and Rabensteiner, G.XI-489-87, CO2 Shielded Automatic Welding Of Boiler Tube To Tubeplate In Vertical Position,Rendi, Xu., Guzhuang, Ye., Huiyuan, Y., Daming, Cui. and Weiyu, Xu.XI-490-87, Report Of SC XI-E Transmission Pipelines, Scopesi, L.XI-491-87, Assessment Of Necessity Of Heat Treatment For Welded Pressure Vessels By Fracture Mechanics Methods, Kalna, K.XI-493-87, Piping Systems In Thermal Power Plants, Schoch W., Kautz, H.R. and Zurn, H.E.D.XI-494-87, Minutes Of Meeting, Stahl, G.XI-495-87, Mechanical Stress-Relief Treatment Of Welded Pressure Vessels By Warm Pressure Test, Kalna, KXI-496-87, Relaxation Overstressing Of Huge Spherical Storage Vessels Repaired By Welding, Hrivnak, I., Lancos, J. and Vejvoda, S.XI-497-87, Principles Of Mechanical Stress-Relief Treatment, Hrivnak, I. and Yuschenko, K.A.XI-499-87, Questionnaire On Spherical Tank Failures, Anon.XI-500-88, Recommendations For The Forming And Welding Of Steel Pipe For The

Page 189

Construction Of Long-Distance Pipelines, Baum, A., Behrens, H.-D., Duren, C., Ingelbrink, E.A., Koch, F.O., Rohde, W. and Wegmann, H.G.XI-501-88, Material Problems In Power Plant Engineering -Thermally Impaired Components And Their Repair By Welding-, Kautz, H.R. and Schoch, W.XI-502-88, Minutes Of The WG Meeting on 21- and 22 May, 1987 At Interatom GmbH-Bergisch Gladbach (W-Germany), Anon.XI-503-88, Commission XI-Documents (Updated 1st September 1988), Anon.XI-504-88, Influence Of Defects On Creep Strength Of Welded Joints, Dolezal, J., Malik, K., Sujan, I. and Velky, M.XI-505-88, Welding Of Duplex Stainless Steels, Gnirss, G.XI-510-88, Agenda Annual Meeting. First Draft, Stahl, G.E.XI-511-88, Alternative Welding Systems For Pipeline, Prosser, K.XI-513-88, Mechanized Ultrasonic Testing Of Circumferential Welds In Pipeline Construction, Belgraver, V.W. and Dijkstra, F.H.XI-514-88, Minutes Of Meeting, Stahl, G.XI-515-88, Annual Report 1988, Stahl, G.E.XI-516-89, Problems Of Detecting Creep Ruptures -Repair Strategies For Maintaining Power Plant Component Life-, Kautz, H.-R., Frank, H., Knotek, O. and Zurn, H.E.D.XI-517-89, CAD And CAM In Chemical Pipework Engineering -Data Processing For Design-CAD- And Manufacturing-CAM- Of Pipeline-Systems In Chemical Engineering And Energy Technology-, Kramer, K. and Zurn, E.D.XI-518-89, WG-Meeting On 26- And 27 May, 1988, At Rijksuniversiteit-Ghent, Belgium (Minutes Of Meeting), Anon.XI-519-89, Comments On Doc. XV-624-87 Part 1 The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products. (PART 4), AnonXI-519-89, Foreword To The IIW Documents Related To The Application On An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products (PART 3), Anon.XI-519-89, Technical Recommendation On The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products (PART 2), Anon.XI-519-89, The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products. Draft Proposal For ISO Standard (PART 1), Anon.XI-522-89, Fitness-For-Purpose Assessments Of Pipeline Girth Welds - Economic Considerations, Prosser, K. and Hopkins, P.XI-524-89, Optimized Pressure Vessel Design With Special Respect To Operating Conditions,Gerlach, H.D.XI-525-89, Agenda Annual Meeting Helsinki, September 89. First Draft, Stahl, G.E.XI-526-89, Pulse-Arc Welding Of Pipelines With Cellulose Electrodes And Flux-Cored Wire Using Inverter Power Sources, Sheinkin, M.Z., Panibratzev, B.K. and Kapinos, D.B.XI-528-89, Report Of SC XI-E Transmission Pipelines, Scopesi, L.XI-529-89, Minutes Of Meeting, Stahl, G.XI-530-89, Annual Report 1989, Stahl, G.E. and Tschesche, P.M.XI-531-89, Commission XI-Documents (Updated 1st October 89), Anon.XI-533-90, Materials-Performance Of Welded Structures In Creep Range', Kautz, H.R. and

Page 190

Zurn, E.D.XI-534-90, Maintenance Of Creep-Loaded Components And Power Plant Life, Kautz, H.R. and Zurn, H.E.D.XI-535-90, Crack Formation In Welds In Ammonia Storage Tanks Made Of Steel St E 355 - Preventative Measures., Gayk, W. and Kautz, R.XI-537-90, Life Extension - A Complex Planning Goal, Garleff, J., Dooley, R.B., Kautz, H.R., van Liere, J. and Plate, K.XI-538-90, Position Butt Flux-Cored Wire Arc Welding Of Large-Diameter Pipes By Using the STYK System Equipement, Shlepakov, V.N. and Kutovoy, A.N.XI-540-90, Application Of High Current Density Submerged Arc Welding On LNG Storage Tank Made Of 9%Ni Steel, Kurehashi, T., Matsui, K., Katayama, N. and Kohno, T.XI-541-90, Agenda Annual Meeting Montreal, July 90. Second Draft., Anon.XI-544-90, In-Service Repair Of Corroded Walls In Gas Pipelines By Surfacing, Lombardini, J. and Hrbal, P.XI-545-90, Report Of SC XI-E Transmission Pipeline, Scopesi, L.XI-546-90, Minutes Of Meeting, Stahl, G.E.XI-547-90, Annual Report 1990, Stahl, G.E.XI-548-90, Commission XI-Documents (Updated 1st Of October 90), Anon.XI-551-91, Thermally Damaged Power Plant Components And Their Repair - Tasks For Welding Engineering, Kautz, H.R. and Zurn, H.E.D.XI-574-92, Commission XI Meeting, Madrid, September 1992, Anon.XI-578-92, Welded Constructions With Advanced Materials - A Scenario For USCS System, Pamdeth, N.M.XI-579-92, The Draft Proposal For The EC Council Directive Pressure Systems (5th Draft), Gnirss, G.XI-580-92, The EN-Standards For Pressure Vessels And Watertube Boilers With Respect To Materials, Fabrication And Testing -Present Situation-, Gnir(, G.XI-582-92, Induction Heat As A Thermal Tool Before, During And After Welding And Used For Welding, Anon.XI-585-92, Repair Welding, Gnir(, G.XI-586-92, Repair Welding Of Defects In Steam Power Boiler Drums, Kalna, K. and Malik, K.XI-587-92, Repair Welding On Cast Steel Casings In Power Stations In East Germany, Gei(ler, K.XI-589-92, Draft Standard For Approval Testing Of Welders. Fusion Welding Of Carbon Steel Transmission Pipelines, Anon.XI-592-92, Ensuring Endurance Of Repair Circumferential Welds In Main Oil And Gas Pipelines, Biletskii, S.M.XI-593-92, The Effect Of Technological Conditions On Creep Resistance Of Welded Joints, Libra, O. and Jelinek, K.XI-595-93, Commission XI Meeting, Glasgow, September 1993, Anon.XI-596-93, Report On The Meeting Held In Copenhagen On 27th and 28th May, 1993, Canale,D.G.XI-597-93, Life Reduction In High Structure Due To Mismatch Of Weld And Parent Material Creep Properties, Samuelson, A.XI-600-93, Avoiding Of PWHT In Repair Welding Of Heavy Walled Pressure Vessels, Kalna, K.XI-601-93, Designing Structures Against Brittle Failure, Kalna, K.

Page 191

XI-602-93, Comparison Among The Present Regulations Concerning The Remanent Life Assessment Of Components Designed For High Temperature Service, Scasso, M.XI-607-93, Estimation Of Preheat Temperature For Pipeline Welding Based On Small Size Cracking Tests, Suzuki, H.XI-613-94, Minutes Of Meeting Of Commission XI, Gnirss, G.XI-614-94, SC XI-E Transmission Pipelines Annual Report, Donato, S.XI-616-94, Comparison Among The Present Regulations Concerning The Remanent Life Assessment Of Components Designed For High Temperature Service, Scasso, M., Lauro, A. and Canale, G.XI-617-94, Present Situation Of The Use Of P 9 1 (X 10 CrMoVNb 9 1) In German Power Stations, Gnir(, G.XI-618-94, Material P 9 1 (X 10 CrMoVNb 9 1). Insertion In The Tiefstack Heat/Power Plant Of The HEW In A Main Steam Line Of Material X 20 CrMoV 12 1, Ambs, E., Tolksdorf, E., Leich, K.E., Schlieben, R. and Schwarzwalder, H.XI-619-94, Stress Relief Of Welds And Weldments, McEnerney, J.W.XI-620-94, Determination Of Residual Stresses In Submerged Arc Multi-Pass Welds By Means Of Numerical Simulation And Comparison With Experimental Measurements, Roelens,J.B., Maltrud, F. and Lu, J.XI-621-94, Heat Treatment On Dissimilar Thickness, Gnir(, G.XI-622-94, Stress Test On Pressure Vessels, Gnir(, G.XI-623-94, Girth Welding Of Duplex Stainless Steel Pipes, Perteneder, E.XI-624-94, Geometrical And Strain-Stress Factors Investigation For Free Bend Test Of Butt Welds, Zandberg, A.S.XI-625-94, Commission XI Meeting, Beijing, September 1994, Anon.XI-626-94, Issues In Life Assessment Of Chrome-Moly Welds, Prager, M.XI-634-94, Annual Report On The Meeting Of Commission XI At The 47th Annual Assembly Of IIW In Beijing, Gnir(, G.XI-677-97, Effect Of Elements On Weldability And Hot Ductility Of FCAW Stainless Steel Welds Metals, Toyoda, M., Matsumoto, O., Kawaguchi, S. and Tsukimoto, K.XI-68-61, Radiography Of Welds Of Boilers And Pressure Vessels (Part I : Principles), Anon.XI-689-97, Minutes Of Meeting, Gnriss.XI-690-98, The 50th Annual Assembly Of The IIW San Francisco 1997. Annual Report Of TheChairman Of the Meeting Of Com. XI Pressure Vessels, Boilers And Pipelines, Scopesi, L.XI-691-98, Preliminary Agenda. Commission XI Meeting, Hamburg, September 1998, Anon.XI-694-98, Assessment Of Failure Resistance Of The Existing Transmission Pipelines And Significance Of Overstress Tests, Kalna, K.XI-695-98, Recommended Practices For Local 360-Degree Band Postweld Heat Treatment, McEnerney, J.W.XI-696-98, Welding Of Dissimilar Metals -Black -White Joints, Gnir(, G.E.XI-697-98, Automatic Pipe Welding System Used In NKK and NK3, Nomura, H., Kaneyama, K. and Katsuki, M.XI-698-98, Reference Colour Charts - For Purity Of Purging Gas In Stainless Steel Tubes, Vagn Hansen, J.XI-700-98, Minutes Of Meeting, Gnir(, B.XI-701-99, The 51st Annual Assembly Of The IIW Hamburg, 1998. Annual Report Of The Chairman Of Meeting Com. XI Pressure Vessels, Boilers And Pipelines, Anon.XI-702-99, Creep Life Management Of Thick-Wall High Temperature Component Welds In

Page 192

Fossil Power Boilers, Nishimura, N., Iwamoto, K., Yamauchi, M., Masuyama, F., Hashimoto, T., Imamoto, T. and Yokoyama, T.XI-703-99, Effect Of SR Treatment On Creep-Ductility Of HAZ Of 2 1/4Cr-1Mo And 1 1/4Cr-1/2Mo Steels, Tamaki, K., Kawakami, H. and Miyata, T.XI-704-99, Repair Of Spherical Storage Tanks For Liquified Hydrocarbon Gases, Hrivnak, I., Elesztos, P., Sklenar, F. and Bohm, L.XI-707-99, Reheat Cracking Sensitivity Of Type 347 Stainless Steel Weld Metal, Yamamoto, H., Yamamoto, E., Kojima, I., Nakano, M., Okazaki, T., Okaniwa, T. and Aihara, T.XI-708-99, The Effects Of Vanadium On Carbide Precipitation In 1 1/4 - 3%Cr-Mo Steel Weld Metals, Gotoh, A., Nakagawa, T., Hatano, H. and Wada, T.XI-710-99, Repair And Properties Of Pipeline Pipes Repaired By The Cold Sleeve Method, Simko, P., Bernasovsky, P. and Soska, A.XI-711-99, Preliminary Agenda Commission XI. Meeting In Lisbon, July 1999, Anon.XI-713-99, Remanent Life Assessment And Extension Of Lifetime Of Steam Boilers, Gnir(, G.XI-717-99, Minutes Of Meeting, Gnirss.XI-718-99, Chairman's Report On The 52nd Annual Assembly Of the International Institute Of Welding. Lisboa, 1999, Anon.XI-719-00, Preliminary Agenda / Final Agenda Commission XI. Meeting In Florence, July 2000, Gnir(, G.XI-721-00, Hot Sleeve Repair Method Of Defective Circumferential Welds On Pipeline Under Pressure, Bernasovsky, P. and Soska, A.XI-722-00, Effect Of Local Heat Treatment On The Properties Of Welded Joints In Sodium Pipelines Of Nuclear Power Stations, Korolkov, P.M.XI-723-00, The Quality System Approach In The Directive 97/23 CE (PED - Pressure Equipement Directive), Fugazzi, A. and Scasso, M.XI-724-00, Accelerated Creep Tests On Welded Joints In 9Cr-1Mo-Nb-V (P91 Type) Ferritic Steel For Both High Temperature And High Pressure Power Piping (1st Part), Lauro, A., Mandina, M. and Carratino, G.XI-726-00, Report On A Technical Investigation Performed For The Structural Integrity Evaluation Of LPG Tanks Recovered From Over Ground Service, Lauro, A., Carratino, G. and Poillucci, G.XI-727-00, Examples Of Risk Analysis Applied To Petroleum Refineries, Based On The Likelihood Of Failure In Plant Units, Lanza, M., Lauro, A. and Pinca, S.XI-736-00, Minutes Of Meeting, Gnirss.XI-739-01, Basic Concept And Application Of Electromagnetically Controlled Molten Pool Welding Process, Manabe, Y., Zenitani, S., Hiromoto, Y., Kobayashi, Y. and Wada, J.XI-740-01, Flaws In Seam Welded Boiler And HRSG Tubing, Price, J.XI-741-01, Emergency Maintenance Of OC Reactor At VCM Plant, El-Batahgy, A., Zaghloul, B., Abdel-Alim, H. and Darwish, F.XI-742-01, Welding And Heat-Treatment Of Joints Made Of Dissimilar Materials, Gnir(, G.XI-94-63, Essential Data Of Strain (Stress) Measurements On Pressure Vessel Parts, Bottema, M.J.XI-B-107-78, Investigation Into Double-Wall Pressure Vessel, Kohut, K. and Makovicky, V.XI-B-114-78, Weld Efficiency Factor In Czechoslovak Standards, Anon.XI-B-120-79, Summary Of Aspects Specific To Layered Pressure Vessel Construction With Reference To Welding, Anon.XI-E-4-80, Weldability Estimation Of HSLA - Pipelinesteels, Bersch, B. and Koch, F.O.

Page 193

XI-E-6-82, Welding Of High Pressure Pipelines In The USSR, Mazel, A.G. and Serafin, O.M.XI-E-7-82, Automatic Submerged Arc Welding Find Use In The USSR Pipeline Construction, Shmelyova, I.A.XI-E-8-82, Flash Butt Welding Of Pipelines, Lifshitz, V.S.XI-E-8-98, Assessment Of Failure Resistance Of Transmission Pipeline Pipes, Kalna, K.XI-E-9-86, Application Of ECA (Engineering Critical Assessment) In The Evaluation Of Defect Tolerance In Girth Welds, Re, G.XII-1000-87, Minutes Of The 1986 Annual Assembly. July, 15-18th, Tokyo, Anon.XII-1002-87, Influence Of Power Source Arc Welding - Statistical Behaviour, Dorn, L. and Rippl, P.XII-1003-87, Phase Transformation (®(®( In The Heat-Affected Zone Of Welded Joints DuringWelding Of Structural Carbon, Low- And Medium-Alloy Steels, Fedoseev, B.A., Lamzin, A.G., Gubanov, A.S., Rubenchik, Yu.I., Sterenbogen, Yu.A. and Denisenko, A.V.XII-1004-87, Control Of Heat Affected Zone Dimensions In P-GMAW Of Mild Steel, Quintino, L.XII-1005-87, Influence Of Welding Parameters On The Characteristics Of Weld Beads Deposited In Mild Steel Grooves By P-GMAW, Quintino, L.XII-1006-87, A Study Of Microporosities In Underwater Wet Welding, Shiming, L., Guorong, W., Yonglun, S. and Zhifeng, L.XII-1007-87, A Study And An Application Of Mild Steel Electrodes For Underwater Welding, Shiming, L., Guorong, W., Xiaoju, L., Zhifeng, L., Dingqiang, H. and Ruming, L.XII-1008-87, Synchronous Welding For Narrow Gap Butt Joints Of Thick Plates, Hata, Y. and Kurihara, Y.XII-1009-87, Review Of CO2 Welding In India, Nanda, J.K. and Deshpande, C.Y.XII-1010-87, Effect Of Post Weld Heat Treatment On The Mechanical Properties Of The Dissimilar Metal Joint Between Alloy 800 and 2.25 Cr-1 Mo Steel Made With Inconel 182 Electrode, Bhaduri, A.K., Seetharaman, V. and Venkadesan, S.XII-1011-87, Achievement Of Full Penetration With P-GMAW In This Stainless Steel Plate, Oliveira Santos, J.F.XII-1012-87, Narrow Gap Submerged Arc Welding With Thin Double Wire Electrodes Controlled By An Adaptive Seam Tracking System, Eichhorn, F., Blasig, K., Luttmann, U. and Helmut, N.XII-1013-87, Annual Report Of Sub-Commission XII D: Standardisation Of Filler Wires And Fluxes, Anon.XII-1014-87, IIW Commission XII: Flux And Gas Shielded Welding Consumable Specifications, Shackleton, D.N.XII-1015-87, The Specification Of Welding Consumables, Shackleton, D.N.XII-1016-87, Minutes Of The Intermediate Meeting Of Commission XII Held On 26 And 27 March 1987 At Esab, Laxa/Sweden, Anon.XII-1017-87, QA/QC For Weld Filler Metal, Monroe, R.E.XII-1018-87, On Boundaries Of Different Metal Arc Transfer In GMA Welding, Ondrejcek, P.XII-1019-87, The Influence Of Nonmetallic Inclusions Of The CVN Impact Properties Of Innershield Steel Weld Metals, Grong, O., Kluken, A.O. and Bjornbakk, B.XII-1020-87, Narrow Gap Welding With An Oscillating Arc In An Internally Induced Magnetic Field, Peizhao, X. and Zhixiong, L.XII-1021-87, Development Of A New Type Of Narrow Gap Welding Equipement, Feng-xiang, Q., Shi-nong, J. and Shi-yuang, W.

Page 194

XII-1022-87, Proposal For An International Survey Of Flux-Cored Arc Welding In The Metal Working Industry, Boekholt, R.XII-1023-87, Some Problems Of Automating The Engineering Labour In Robotic Welding Production, Tongov, M., Zhelev, A. and Stanev, S.XII-1025-87, Reconditioning Of Worn Out Carriage And Wagon Wheel Flanges By SubmergedArc Welding, Sarkar, N.K. and Krishna Prasad, B.N.XII-1026-87, AGENDA. Annual Assembly, Sofia, Bulgaria, 4-11 July, 1987, Drews, P.XII-1027-87, IIW Member Societies Responsible For Forwarding Documents, Anon.XII-1029-87, Shielding Gases For Gas-Metal Arc Welding Of Stainless Steels, Stenbacka, N. and Persson, K-A.XII-1030-87, A Uniform Method To Describe And Measure The Static And Dynamic Characteristics Of A Welding Power Source, Bundai, P.XII-1031-87, High Speed Real Time Digital Processing For Welding Power Source Static And Dynamic Control, Bundai, P. and Aberg, P.XII-1032-87, FMS Welding Stations In Scandinavia, Anon.XII-1033-87, CADCAM In Welding Production - Research And Industrial Experience. Part 1: The Design Process, Persson, T.XII-1035-87, The Development And Use Of Arc Welding Systems With Flux-Cored Wires In The Manufacturing Industry, Bockholt, R.XII-1036-87, Precision Output Wire Feeders, Needham, J.C.XII-1037-87, Flexible Sensor Aided Welding System Makes Use Of CAD-Information, Drews, P. and Fuchs, K.XII-1038-87, Development Of Sensors For Automated Arc Welding Processes, Drews, P., Kleinert, C., Wagner, R. and Willms, K.XII-1039-87, Pores Prediction In Basic Welds, Pokhodnya, I.K., Ponomarev, V.E., Gorpenyuk, V.N., Ofengenden, R.G., Dychenko, I.D. and Dorundyak, N.V.XII-1040-87, Technological Properties Of Basic Electrodes And Methods Of Their Measuring, Pokhodnya, I.K., Ponomarev, V.E., Gorpenyuk, V.N., Ofengenden, R.G., Andreev, O.M. and Shymko, M.M.XII-1043-87, Minutes Of Annual Assembly Of Commission XII. Held On 7-10 July 1987 In Sofia, Bulgaria, Drews, P.XII-1044-87, Annual Report Of Commission XII 1987, Anon.XII-1046-87, Kinetics Of GAS generation In Flux-Cored Wire Welding, Shlepakov, V.N., Suprun, S.A. and Kotel'chuk, A.S.XII-1047-87, Development And Application Of New Oxide-Activated Tungsten Electrode In Japan, Masumoto, I., Matsuda, F. and Ushio, M.XII-1048-87, Automatic Control Technique For Narrow Gap GMA Welding -Application Of Image Processing Technique-, Watanabe, H., Kondo, Y. and Inoue, K.XII-1050-88, Present Status In The Use Of Cored Wires For Arc Welding Worldwide, Boekholt, R.XII-1051-87, Application Of Method Of Test Transition Processes In Digital Measuring DevicesOf Welding Displacements, Korotynskii, A.E., Voznyuk, A.V. and Kovalenko, D.C.XII-1053-88, The Significance Of Different Welding Parameters To Penetration And Weld Metal Cross Section Area At Short Arc GMAW -Bead On Plate Tests, Persson, K-A. and Stenbacka, N.XII-1054-88, Allowable Wire Positioning Tolerance In Fully Mechanized MAG (GMA) Welding, Stenke, V.

Page 195

XII-1055-88, Development Of Intelligent Machine For ALL-Positional MAG Welding, Baba, N., Tachikawa, H., Kohno, R., Kakimoto, E. and Sakurai, H.XII-1056-88, A Review Of Some Expert Systems In Welding Technology, Budgifvars, S.XII-1057-88, Recent Achievements Of Arc Welding Technology With Respect To Automatization, Masumoto, I. and Nomura, H.XII-1058-88, Metal Powder Submerged Arc Welding (MPSAW), Wittung, L.XII-1060-88, Synergic MIG Welding Cored Wires, de Medeiros, R.C., Quintino, L. and Oliveira Santos, J.F.XII-1062-88, Application And Economic Aspects Of A 3-Dimensional HeNe Laser Sensor, Appels, J.A.C.XII-1064-88, Definition And Classification Of Welding Automation And Process Control, Malin, V.XII-1065-88, Development Of SAW Consumables With High Toughness And Low Hardenability For Sour Service Offshore UOE Lineup., Matsuyama, J., Kawabata, F., Nishiyama, N., Shiga, C., Hauge, O.J. and Gundersen, K.XII-1066-88, Practical Application Of Public Heated Hot Wire Welding Process, Ishikawa, T., Takuwa, T., Nakamura, T., Tsunoda, M. and Hori, K.XII-1067-88, The Development And Application Of A Synchronized, Twin Arc Frequency Modulated Pulsed GMAW/MIG Welding System, Ditschun, A., Eaton, N.F., Lassaline, E. and Zajaczkowski, B.XII-1068-88, Development Of Automatic Welding System For Heavy-Wall Steel Structures, Wada, K., Manabe, Y., Inoue, S., Kawakami, K. and Fujiyama, K.XII-1069-88, Off-Line Programming System For Arc Welding Robots, Watanabe, T., Murakami, T., Kojima, T., Sekino, T., Munezane, Y. and Fukuda, H.XII-1070-88, N/C Welding Systems For Bridge Construction, Shimizu, S., Kurihara, Y. and Tsuchida, E.XII-1071-88, Development Of Hard Overlay Welding For High Wear Resistance, Fujimura, H., Notomi, A., Kamito, Y. and Kinoshita, M.XII-1072-88, Development Of Welding CAD/CAM Systems For Large-Size Steel Structures, Nakamura, U., Tomidokoro, S. and Fukuzawa, M.XII-1073-88, The Portable Automatic Welders For Industrial Pipelines, Khavanov, V.A. and Grinenko, V.I.XII-1074-88, The Use Of Sensor- And CAD/CAM-Information In Robotic Information, Drews, P. and Fuchs, K.XII-1075-88, Investigation Of The Mechanical Properties Of Joints In RQT 501 Plate Welded Using SD3 1 Ni 1/4 Mo / OP121TT. Technical Report No: CET 28 RM., Thornton, C.E.XII-1076-88, Study On Tandem Wires Narrow Gap Submerged Arc Welding, Lin, S., Yang, S. and Tao, B.XII-1077-88, Sensors For Seam Tracking And Adaptive Control Documents Presented In IIW Commission XII 1985-1988, Linden, G.XII-1078-88, Practical Application Of Transfer Function Measurement In Order To Determine Static And Dynamic Characteristics Of Welding Power Units, Bundai, P.XII-1081-88, Alloying Of Steel And Its Weldability In Electroslag Welding Without Subsequent Normalizing, Egorova, S.V.XII-1084-88, Flux Cored Wires For Robots, Miyazaki, T.XII-1085-88, Pulsed TIG Welding Of Dissimilar Materials, Quintino, L. and Goncalves, V.XII-1088-88, Tungsten Inert Gas (TIG) Welding - General Survey, Anon.

Page 196

XII-1100-88, Annual Report Of Commission XII 1988, Anon.XII-1101-88, Welding Flux-Cored Wires And Ways Of Their Development, Pokhodnya, I.K.XII-1106-88, Oxidizing Potential Of Bonded Fluxes, Golovko, V.V., Kushnerev, D.M. and Shvachko, V.I.XII-1107-89, Robotic Surfacing Of Forging Tools With Cored Wire Electrodes, Drews, P. and Cordes, B.XII-1108-89, Development Of Internal Bore Welding Process For Heat Exchangers, Yoshida, Y., Wakamoto, I., Kobayashi, T. and Okamoto, Z.XII-1109-89, Practical Application Of Windproof Automatic MAG Welding For Installation Of Containment Vessel Of Nuclear Power Station, Fukaya, T., Nishina, N. and Watanabe, N.XII-1110-89, Adaptive Pulsed GMAW Control: The Digipulse System, Collard, J.F.XII-1111-89, Methods Of Determination Of Welding Flux Oxidation Potential, Golovko, V.V.XII-1112-89, A Review Of Some Expert Systems In Welding Technology. Annual Report 1989, Budgifvars, S.XII-1113-89, The Effect Of Rare-Earth Metal, Boron And Vanadium Microadditives On The Weld Metal Structure And Properties In High-Strength Welded Joints, Mussiyachenko, V.F., Mel'nik, I.S., Movchan, M.B. and Kiryakov, V.M.XII-1114-89, Investigations On Parameter-Control For Arc Welding Robots, Becker, L., Farkas, A., Konkoly, T. and Nagy, F.XII-1115-89, Computerized Design Of Welding Technologies, Palotas, B. and Konkoly, T.XII-1116-89, Application Of High Current Density Submerged Arc Welding On LNG Storage Tank Made Of 9%Ni Steel, Kurehashi, T., Matsui, K., Katayama, N. and Kohno, T.XII-1117-89, Interpretive Report On Electroslag, Electrogas and Related Welding Processes, Thomas, R.D. and Liu, S.XII-1119-89, Development Of Multi-Electrodes Automatic Fillet Welding Equipement With HighSpeed Rotating Arc, Nomura, H., Sugitani, Y., Kobayashi, Y. and Murayama, M.XII-1120-89, Intelligent Arc Welding Robot With Simultaneous Control Of Penetration Depth and Bead Height, Nomura, H., Sugitani, Y. and Nishi, Y.XII-1121-89, Metal Transfer And Spatter Loss In Double Gas Shielded Metal Arc Welding -Study On Double Gas Shielded Metal Arc Welding (Report 1)-, Masumoto, I., Kutsuna, M. and Abraham, M.XII-1122-89, Shielding Gas And Cored Wire Welding Characteristics - Weld Metal Mechanical Properties, Stenbacka, N.XII-1124-89, AGENDA. Annual Assembly, Helsinki, Finland, 2-9 September, 1989, Drews, P.XII-1125-89, A New Methodology For Optimizing Arc Welding Procedures, Galopin, M. and Boillot, J-P.XII-1126-89, American Welding Society Annual Conference April 1989, European Standards For WeldingXII-1127-89, Robot Welding At BMW, Anon.XII-1128-89, Robotic Welding Centre With Optical Workpiece Identification, Dilthey, U.XII-1129-89, Sensor Technique For Welding Robots: State Of Development And Trends, Dilthey, U.XII-1131-89, Development Of Various Flux-Cored Wires And Their Application, Sakai, Y., Aida, I., Suga, T. and Nakano, T.XII-1133-99, Strength And Impact Requirements For Carbon, Carbon Manganese And Micro Alloyed Weld Metal Deposits, Anon.XII-1134-89, Minutes Of The Intermediate Meeting, Anon.

Page 197

XII-1135-89, Welding Expert Program, Gunnarsson, K.T., Prinz, F.B. and Vary, H.B.XII-1136-89, Ultrasonic Sensors In Robotic Seam Tracking, Gunnarsson, K.T. and Prinz, F.B.XII-1137-89, CAD Model-Based Localization On Parts In Manufacturing, Gunnarsson, K.T. and Prinz, B.XII-1138-89, Annual Report Of Sub-Commission XII-D, Anon.XII-1139-89, Draft Proposal Pren ___ Gases For Gas Shielded Arc Welding And Cutting, Anon.XII-1140-89, Approval Of Consumables, Anon.XII-1141-89, Generic System For Designating Welding Filler Metals. A Proposal For Submission To ISO, Anon.XII-1142-89, Flux Cored Wire Standard Specification, Anon.XII-1143-89, Welding Consumable Specifications For Submerged Arc, Flux Cored Shielded Arc Welding Process, Shackleton, D.XII-1144-89, Report Of Questionnaire On The Use Of Tensile Strength Or Yield Strength For Welding Consumable Designation, Shackleton, D.XII-1145-89, Design Of A Flexible Testing And Repairing Cell For Turbine Blades, Drews, P., Buchmann, R. and Cordes, B.XII-1146-89, The Effect Of Wave Shape On The Reduction Of Spatter Generation During HighSpeed Pulsed MAG Welding, Yamamoto, H., Harada, S. and Yasuda, T.XII-1147-89, Quality Assurance And The Approval Of Welding Consumables, Sevenhoven, C.V.XII-1148-89, Recent Advances In Inverter Controlled, Gas Shielded Arc Welding Power Sources And Their Applications In Japan, Yamamoto, H.XII-1151-89, Mechanical Properties Of Submerged Arc Welds With Metal Powder Addition, Vilpas, M., Nies, H., Krebs, H. and Karppi, R.XII-1154-89, Minutes Of Annual Assembly Of Commission XII Held On 5-8 September 1989 InHelsinki, Finland, Drews, P.XII-1155-89, Annual Report Of Commission XII, 1989, Anon.XII-1156-90, One Pass Submerged Arc Welding With Flux Containing Iron Powder For Thick Steel Plates, Sakaguchi, S., Yamaguchi, T. and Shiga, C.XII-1157-90, Computer Aided Weld (CAW) In Europe, Budgifvars, S.XII-1158-90, Current Waveform Control Of Inverter Controlled GTAW, Araya, T.XII-1160-90, New Developments In Gas Tungsten And Gas Metal Arc Welding Of Stainless Steels And Nickel Base Alloys, Stenke, V.XII-1161-90, The Effects Of Current Wave Shape And Electrode Wire Contents On Metal Transfer In High Speed Pulsed MAG Welding, Matsui, H.XII-1162-90, Development Of Automatic Welding Method For Large Diameter Nozzle AttachedTo Piping With GMAW, Koguchi, T., Simoyama, H., Shono, S. and Kamo, K.XII-1164-90, Application Of Automatic Welding Machines For Beer Tanks, Kise, T., Moriya, T. and Sugimura, Y.XII-1165-90, Synergic Algorithms To Relate Wire Feed Rate To Arcing Current Conventional GMA Welding, Oliveria Santos, J.F.XII-1167-90, The Influence Of Tungsten Electrode Geometry In Mechanized TIG Welding On Aluminum, Bracarense, A.Q.XII-1168-90, Models Of Opening Of Electrical Arc And Detachment Forces For Semi Automatic Processes Under Argon Gas Shielding (MIG), Rich Argon Mixtures (MIG-MAG) AndCarbon Dioxide CO2 (MAG), Couzo, V. and Gonzalo, J.

Page 198

XII-1169-90, Algorithms For The Synergic Control Of The Pulsed MIG/MAG Welding, Dutra, J.C. and Olle, L.F.XII-1170-90, Surface Detection With Laser-Analogsensor For The Control Of A Welding Robot, Cordes, B.XII-1171-90, Computerized Procedure Of Metallic Drop Transfer Analysis For The Determination Of Pulsed Welding Variables, Dutra, J.C.XII-1172-90, Statistical Analysis Of Arc Stability In MIG/MAG Welding With Short Circuit Transfer, Dutra, J.C.XII-1173-90, Control Systems Of The MIG-MAG Welding Process And Their Influence On Electrode Fusion, Dutra, J.C. and Olle, L.F.XII-1174-90, The Study Of Metal Transfer On The GMAW Process, Using A Projector And Voltage And Current Oscylographic Processing, Dutra, J.C. and Baixo, C.E.I.XII-1175-90, Development Of An Optical Sensor System For Seam Tracking And Welding Parameter Adaptation, Drews, P., Wu, M.S. and Cordes, B.XII-1176-90, Narrow Gap Submerged Arc Welding In Thick Papers, Prata, S.XII-1177-90, A Vision-Aided System For Multipass Adaptive Welding, Galopin, M., McComber,P. and Boillot, J.P.XII-1178-90, Metal Transfer And Spatter Loss In Double Gas Shielded Metal Arc Welding Using Flux-Cored Wire, Masumoto, I., Kutsuan, M. and Abraham, M.XII-1181-90, Low-Spatter Ignition Of The MIG-Welding Arc, Dilthey, U., Eichhorn, F., Groten, G. and Matzner, H.XII-1182-90, Fully Mechanized Two-Wire Submerged-Arc Welding Of Curved Seams Without Path Programming, Dilthey, U., Eichhorn, F., Luttmann, U. and Kahrstedt, U.XII-1184-90, Development And Field Testing Of A Portable Robotic System For Hydraulic Turbine Runner Repair, Tinkler, M.J.XII-1185-90, Materials Sensitive Phenomena In Gas-Shielded Arc Welding Process, Ushio, M.XII-1186-90, Aspects Of Pore Formation In GMAW, Runnerstamm, O. and Stenbacka, N.XII-1187-90, Research Of A New Welding Technique - Double Heat Source Laser-Arc, Jai Rui, Z., Shai Bin, Z., Dong, S., Sheng Sun, H., Deng Ping, L. and Yi Tong, X.XII-1188-90, Development Of The Automatic Weld Defect Identification System For The Radiographic Testing, Michiba, K.XII-1190-90, Summary Of Computer Programs For Welding Engineering, Cary, H.B.XII-1193-90, MAG Welding Of Low Alloy Steel With Different Types Of Cored Wire, Farwer, A.and Sroka, U.XII-1194-90, On Pulsed Submerged Arc (SA) Welding, Caloun, K. and Varga, T.XII-1195-90, Summary Of The Report Present Status In The Use Of Cored Wires For Arc Welding Worldwide, Boekholt, R. and Norweld, L.XII-1196-90, Robot Safety In Arc Welding, Starke, G.XII-1197-90, Welding Gases - Physical Properties, The Basis For The Development And Optimum Applications Of Shielding Gases And Gas Mixtures, Boehme, D.XII-1199-90, Welding Characteristics Of A New Welding Process, T.I.M.E Process, Church, J.G.XII-1200-90, Application Of Calculation Procedure To Estimate The Effect Of Slag Oxidizing Ability On The Lowhydrogen Weld Formation In Submerged-Arc Welding, Golovko, V.V.XII-1201-90, Controlled Metal Transfer In CO2 Arc Welding, Lebedev, A.V.XII-1202-90, On The Method Of Determination Of Oxidation Potential In Welding Fluxes, Zeke, J. and Mikula, K.

Page 199

XII-1225-91, The High Efficiency MAG Welding Process (Quad Gas Mixture MAG Process) Application Report, Sejima, I. and Imaizumi, H.XII-1252-91, Regions Of Slag And Metal Molten State In Electric Arc Welding, Kuz'menko, V.G.XII-1253-91, Investigation Of The Properties Of Large-Diameter Pipe Joints Welded With Flux-Core Wire, Orlov, L.N., Yu, A., Gavrilyuk, A. and Shevchenko, G.A.XII-1259-91, Comparison Of Small Welding Power Sources, Leino, K., Poikonen, A. and Makelainen, H.XII-1261-91, Literature Survey For The Welding Of Primed Plate, Lucas, W.XII-1262-91, Questionnaire About The Use Of Pre-Fabrication Primers, Lucas, W.XII-1263-91, Welding Of High- Tensile- Steels With T.I.M.E.- Process, Lahnsteiner, R. and Prior, F.XII-1264-91, Automatic Bead Height Control During SA- and MIG Welding, Dilthey, U., Luttmann, U. and Oster, M.XII-1265-91, Trainable Arc Sensor For Varying Welding Joint Geometries -Use Of Artificial Neural Networks-, Dilthey, U., Scheller, W., Borowka, J., Ameling, W., Kreft, L. and Raus, M.XII-1267-91, A Study Of Arc Augmented Laser Welding, Shengsun, H., Shaobin, Z., Dengping, L., Dong, S. and Jiarui, Z.XII-1268-91, Metal Powder Submerged Arc Welding (MPSAW) -A Literature Search-, Wittung,L.XII-1271-91, Questionnaire, Anon.XII-1272-91, Solidification, Blowhole Formation And Cracking Of Steel Weld Metal, Masumoto,I.XII-1273-92, Programming Of Micro DAT Hardware-Based Microprocessor Controller for Welding CAM Systems, Sergeev, A.I. and Voitenko, V.Ya.XII-1274-92, Welding Machines And Robots Currently In Use In Shipbuilding And Technical Problems Requiring Solution, Takeda, H., Koga, H., Moriuchi, S. and Hayashida, T.XII-1275-92, On The Estimation Of Temperature Distribution And Erosion Of Electrode In Hyperbaric TIG Arc Welding, Suga, Y. and Ogawa, K.XII-127-62, Recent Advancement Of CO2 Arc Welding Process In Japan, Sekiguchi, H.XII-1276-92, A Control System Of Wire Feed Rate For Stability Of GMA Welding Process, Ide,E., Kawano, T. and Kodama, M.XII-1277-92, All Position Narrow Gap MAG Arc Welding For Heavy Wall Structures, Iijima, S., Mabuchi, Y., Ukeguchi, Y. and Kawano, T.XII-1278-92, Development Of Plasma Arc Gouging Process For Steels And Clad Steels, Sonoda, H., Kawaguchi, Y., Fujiyama, H., Inamura, A. and Okuyama, K.XII-1280-92, Automatic Assembling And Welding By Multiple Handling Robot, Takano, Y., Kamiyama, Y., Shimizu, Y., Hoh, T. and Sejima, I.XII-1281-92, Quality Assurance In Fully Mechanized MAG Welding, Stenke, V.XII-1283-92, The Development Of Highly Efficient And Automated Welding In Chinese Shipbuilding, Fubao, D., Guosheng, Z. and Qihao, Z.XII-1284-92, Development Of Lattice Welding Robot, Sugitani, Y. and Tamaoki, N.XII-1285-92, Integrated Design And Manufacturing System For Shipbuilding, Nomoto, T. and Aoyama, K.XII-1286-92, Adaptive Control Of Weaving Amplitude And Welding Speed On Robotic Grove Welding, Saikawa, S., Iwaki, S. and Fukuoka, H.XII-1287-92, The Use Of Welding Machines And Consumables In Japanese Shipyards -The

Page 200

State Of The Art-, Saitoh, T. and Yasuoka, T.XII-1288-92, Simple Mechanized Welding For Shipbuilding In Japan -State Of The Art-, Saitoh, T., Yamada, M., Ohno, M., Omata, K., Wakiyama, J., Kawabe, K., Nishiura, K. and Yasuoka, T.XII-1318-93, Questionnaire About The Application Of Monitoring Systems For Arc Welding, Rehfeldt, D.XII-1334-93, An Assessment Of Weldable Primers, Lucas, W. and Seldon, J.D.XII-1340-93, 1993 Annual Report For Sub-Commission XII-D, Shackleton, D.XII-1341-93, Report Of IIW Sub-Commission XII-D Meeting In Genoa, Italy on 28th January, 1993, Shackleton, D.XII-1342-93, Weldability Of Stainless Steels, Daemen, R.XII-1345-93, Advancements In State Of The Art Welding Power Supplies Through Inverterization (Interim Report), Yamamoto, H.XII-1346-93, Annual Assembly 1993 In Glasgow, Scotland. Agenda, Drews, P.XII-1379-94, MAG Double-Wire Welding - A Process To Reach High Welding Speed, Bohme, D., Nentwig, A.W.E. and Knoch, R.XII-1422-91, Safe Life Fatigue Design Of Welded Structures, Radhakrishnan, V.M.XII-1426-96, Pure Weld Metal And Its Mathematical Support, D. PopovitsXII-1427-96, Influence Of Shielding Gas Composition On Features Of The GMAW Process, Quintino, L. and Pires, I.XII-1428-96, Fatigue Performance Of Tungsten Inert Gas (TIG) And Plasma Welds In Thin Sections, Quintino, L. and Cardoso, J.XII-1429-96, Tubular Cored Wires For Gas Shielded And Self-Shielded Metal Arc Welding Of Carbon-Manganese Steel, Anon.XII-1430-96, Tubular Cored Wires And Rods For Gas Shielded And Self-Shielded Metal Arc Welding Of Stainless Steel, Anon.XII-1431-96, The Development Of Structural Welded Applications Of Aluminium, Cottignies, L.and Boucher, C.XII-1433-96, MIG Welding Of Aluminum -Process And Power Source-, Yamamoto, H., Harada, S., Nishikawa, W. and Ueyama, T.XII-1434-96, TIG Welding Power Source And Arc Phenomena, Mita, T.XII-1436-96, Recent Investigations On MIG And TIG Aluminum Welding With Different Shielding Gases, Farwer, A.XII-1437-96, Friction Stir Welding Aluminum, Dawes, C.J.XII-1438-96, Stitchfolding And Clinching - Alternative Methods To Spot Welding, Bergkvist, H.XII-1439-96, T.I.M.E Twin - A Novel Double Wire Process For Joining Aluminum, Hackl, H.XII-1440-96, Wire Feed Rate Model For Pulsed Gas Metal Arc Welding Of Aluminum, Subramaniam, S.XII-1441-96, Surface Hardening Of Aluminum Alloys By Alloying Process, Matsuda, F.XII-1443-96, Manufacturing Of High-Tech LNG Spheres In Aluminium, Gustafsson, J.XII-1444-96, Development Of Robot Welding System for Aluminium Body Structure Of Shinkansen Trains, Kinoshita, T., Hattori, T., Matsumura, H., Hasegawa, H., Takeichi, M. and Seto, M.XII-1446-96, Challenges Of Welding Aluminium Alloys For Automotive Structures, Hinrichs, J.F., Noruk, J.S., McDonald, W.M. and Heidemanm, R.J.XII-1447-96, NDT Of Welded Aluminium Components, Siewert, T.A.XII-1448-96, A-TIG Flux For Increasing The Performance And Productivity Of Welding

Page 201

Processes, Lucas, W., Howse, D., Savitsky, M.M. and Kovalenko, I.V.XII-1449-96, Computer Aided Welding Software In The UK, Lucas, W.XII-1450-96, CAW '96: Computer Aided Welding Software In The Americas, Siewert, T.A.XII-1451-96, Computer Aided Welding (CAW) In Central Europe, Dilthey, U. and Roosen, S.XII-1453-96, Computer Aided Welding In China, Jinning, P. and Bingsen, C.XII-1454-96, Multi-Robot Welding System For Sub-Assembly In Shipbuilding, Sugitani, Y., Kanjo, Y., Gotoh, N. and Serizawa, H.XII-1455-96, Report Of IIW Sub-Commission XII-D Meeting In Brussels, Belgium On 6th May, 1996, Shackleton, D.XII-1456-96, An Investigation Into Resistance To Porosity Generation In High-Speed Horizontal CO2 Fillet Welding, Suga, T., Nagaoka, S., Nakano, T. and Suenaga, K.XII-1457-96, The Improvement Of Ultrasonic Characteristics In Weld Metal Of Austenitic Steel Using Magnetic Stirring Method, Hirano, K., Arakawa, T., Watando, M., Yoshikawa, K. and Tanosaki, M.XII-1458-96, Development Of Intelligent Control System Of GTAW Process, Kamo, K., Nagura, Y., Fujita, K., Fujiya, Y. and Takagishi, M.XII-1459-96, Development Of Electro-Gas Arc Welding System For Curved Shell Plates Of Very Large Container Ship, Tsujii, H., Toyohara, T., Tsuji, M. and Masaki, K.XII-1460-96, Development Of Full Automatic Welding System For TIG All Positions, Kobayashi, M., Haneda, M., Shibata, N., Imanaga, S. and Ashida, E.XII-1461-96, Compliance Of Arc Welding Equipement With The European Electromagnetic Compatibility Directive, Melton, G.XII-1463-96, Notes Of ISO/TC44/SC3 Meeting on 12/13 December, 1995, Shackleton, D.XII-1464-96, Annual Report Of Sub-Commission XII-D, Shackleton, D.XII-1466-96, Classification Of Solid Nickel And Nickel Alloy Wire Electrodes Welding And Overlaying, Jordan, D.XII-1467-96, Fillet Weld Test For Assessing Root Penetration And Positional Usability For Classification Of Arc Welding Electrodes And Wires, Kotecki, D.XII-1468-96, Theory Of Layered-Structure Formation In Peritectic Systems, Trivedi, R.XII-1469-96, Characterization Of Welding Arc Spectral Light Emission, Richardson, R.W.XII-1472-96, Computer Aided Welding (CAW) System In Japan, Kutsuna, M., Ohji, T., Suga, T., Imaoka, Fujii, H., Okumura, S. and Sugitani, Y.XII-1473-96, Controlling Of Torch Attitude And Seam Tracking By Using Neural Network In Short - Circuiting Arc Welding, Oshima, K., Yamane, S., Yabe, M., Kawahara, Y., Eguchi, K. and Kubota, T.XII-1474-96, Application Of Multilayered Fuzzy Inference To The Tracking Of The Orbit On A Two Dimensional Plane Using Welding Robot, Oshima, K., Eguchi, K., Yamane, S., Numakura, M., Szczuka, M. and Slezak, D.XII-1475-96, IIW Commission XII - Annual Assembly '96 In Budapest, Hungary, Drews, P.XII-1476-96, Quality Assessment Of Laser Welding In Automotive Aluminium Alloys, Russell, J.D. and Jones, I.A.XII-1480-96, Annual Report 1996 Of IIW Commission XII, Drews, P. and Kampker, M.XII-1483-97, Development Of Field Welding Systems For Transmission Steel Tube Towers, Inaoka, K.XII-1484-97, Development Of New GTAW Process By Magnetic Control On Molten Pool, Yukio, M., Yosinori, H., Hirokazu, W., Yasuyuki, K. and Hirosi, K.XII-1485-97, Development Of D-MAG Process Using Ar-He, Ar-He-02 Or Ar-02 As An Inner

Page 202

Shielding Gas, Kutsuna, M., Abraham, M., Kotani, Y., Yamawaki, K. and Hayashi, D.XII-1486-97, Development Of Remote Controlled Automated TIG Welding System For LNG Storage Tank, Watanabe, S., Imamura, K., Nagumo, S., Tomidokoro, S., Tejima, A. and Katayama, N.XII-1487-97, A New Method For Penetration Monitoring And Seam Tracking In Welding Process, Minsheng, W., Minghui, L. and Zhengxian, W.XII-1488-97, New Welding Technologies For Transmission Pipelines, Suezawa, N.XII-1489-97, Development Of High Speed Horizontal Fillet Welding Process In GMAW Process, Kodama, M.XII-1490-97, Application Of The Plasma Arc Gouging Process For LNG Storage, Tanks, Y., Chida, K., Niimi, M., Kawashima, A. and Inamura.XII-1491-97, Detection Of Molten Poll Oscillation And Penetration Control In TIG Arc Welding, Suga, Y., Yasuda, K. and Horio, T.XII-1492-97, Toughness Of Weld Metal From MAG Welding Flux Cored Wire For Low Temperature Service Steel, Suega, T., Ikemoto, K., Konishi, M., Kurokawa, T. and Hosoi, K.XII-1493-97, Life Cycle Assessment Of Welding Power Sources Technology, Pekkari, B.XII-1494-97, Through The Arc Sensing In GFMA Welding With High Speed Rotating Torch, Dilthey, U.XII-1495-97, Measurement Of Wire Feed Rate Fluctuations In Gas Metal Arc Welding, Grad, L., Polajnar, I. and Kralj, V.XII-1496-97, Applicability Of Three Shop Primers To Automated Welding Production, Leino, K., Kahala, S., Rajamaki, P., Hiltunen, P., Heinakari, M. and Karppi, R.XII-1497-97, CIM In Welding Fabrication, Sugitani, Y. and Kanjo, Y.XII-1498-97, GTA Welding Of Aluminium Matrix Composites, Hick, H. and Staufer, H.XII-1499-97, High Performance MAG Welding With The LINFAST Concept, Trube, S.XII-1500-97, TIG Welding Of Aluminium Alloys - The Influence Of The Alloy, Surface Condition And Shielding Gas On The Welding Result, Trube, S.XII-1501-97, MIG-Brazing Of Galvanised Sheet Metals And Profiles, Ebbinghaus, M., Hackl, H. and Lahnsteiner, R.XII-1502-97, Industrial Application Of Submerged Arc Cladding, Blaskovic, P. and Malinovska, E.XII-1503-97, Application Of Neural Network To Robotic Welding - Sensing And Control In Multilayer Welding, Oshima, K., Horinaka, S., Sugi, H., Eguchi, K., Kubota, T. and Yamane, S.XII-1506-97, Index Of Generic Designation Numbers For Welding Filler Metal Specifications, Thomas, R.D.XII-1508-97, Improved User Orientated Programming Of Robots For Welding In The Workshop, Kampker, M.XII-1511-97, Technology Of One-Pass Vertical Welding Of Butt Joints With Free Formation OfWelds, Gorbach, V.D., Stegantsev, V.P., Dolgorukov, V.V. and Chaban, V.L.XII-1512-97, Semiautomatic Machine For Plasma Welding Of Aluminium And Its Alloys, Gorbach, V.D., Bochkarev, V.P. and Nazaruk, V.K.XII-1513-97, Propeller Shafts With Durable Corrosion-Resistant Coatings, Gorbach, V.D., Bochkarev, V.P., Nazaruk, V.K. and Agureyev, A.G.XII-1514-97, Modern Methods Of Predictions And Reduction Of Residual Stresses When Producing Complicated Three-Dimensional Hull Structures And Ship Hulls, Gorbach, V.D., Mikhaliov, V.M. and Stegantsev, P.XII-1515-97, Crevice-Corrosion-Resistant Overlaying Alloy And Its Applications, Miyasaka, M.,

Page 203

Nakahama, S. and Ishiguro, J.XII-1520-98, Some Applications Of The Highly Efficient Submerged Arc Welding Procedures In Japan, Otsu, M., Abe, T., Nagatani, K. and Tsutsumi, S.XII-1522-98, Development Of One-Side Welding Robot For Curved Ship Shell Plates, Aoki, T.,Katoh, T., Hoashi, K., Miyazaki, T. and Nakajima, Y.XII-1524-98, EMC Of Arc Welding - Flicker And Harmonic Current Emissions, Melton, G.B.XII-1525-98, Requirements For Arc Monitoring And Equipement Calibration, Melton, G.B.XII-1527-98, A Model For Wire Feeding Process In Gas Metal Arc Welding, Kataoka, T. and Yasuda, K.XII-1538-98, Advanced Parametric Programming Of Arc-Welding Robot, Gustafsson, B., Moosakhanian, H., Renfors, J. and Oy, T.XII-1539-98, Recent Advances In Submerged Arc Welding In Vertical Position, Herold, H., Zwickert, H. and Zahariev, S.XII-1543-98, Double Wire MIG Welding Process And Its Applications, Shinoda, T., Nakata, J. and Miyauchi, H.XII-1544-98, Development Of Fully Automatic GTAW System With Visual Sensor, Morisawa, J., Gotou, N., Haneda, M., Shibata, N. and Kobayashi, M.XII-1545-98, Development Of Fully Automatic System For Narrow Gap GTAW With Visual Sensor, Takagishi, M., Kamo, K., Ishide, T., Fujita, K. and Ikeda, T.XII-1546-98, Development Of Fully Automatic GMAW System With Visual Sensor, Asai, S., Taki, K., Kubo, K., Kaneko, T. and Nomura, K.XII-1547-98, Development Of Automatic Confirmation System Of Weld Quality, Tejima, A., Ono, K., Tagami, M., Yamadori, H. and Okubo, T.XII-1548-98, A New Capsule (Erection And Welding) System In The Tunnel Shaft For A Large Penstock, Nakayama, S., Kawahara, H., Kanamaru, T., Uehara, H., Okuma, Y., Iwase, T., Iwami, H. and Iwashima, K.XII-1549-98, Two-Wire Processes For Higher Deposition Rate And Higher Welding Speed, Dilthey, U., Reisgen, U., Bachem, H. and Gollnick, J.XII-1551-98, Computer Aided Welding (CAW) System In Japan (Report II), Kutsuna, M., Ohji, T., Suga, T., Imaoka, Fujii, H., Okumura, S. and Sugitani, Y.XII-1552-98, CIM In Welding Fabrication (Final Report), Sugitani, T., Kanjo, Y. and Ushio, M.XII-1553-98, RobIcon - An Icon-Based Programming System For Welding Robots, Kampker, M.XII-1554-98, New Welding Software In Germany, Roosen, S.XII-1555-98, Occupational Hygiene For Welding Operations In Russian Shipbuilding And Ship Repair, Koryukaev, Y.S., Gorbach, V.D. and Safiulin, N.S.XII-1556-98, Safety Labour And Environment Protection As Factors Taken Into Account WhenPlanning And Applying Welding And Cutting Processes In Russian Shipbuilding, Gorbach, V.D., Koryukaev, Y.S., Safiulin, N.S. and Stegantsev, V.P.XII-1557-98, Energy Efficient In Welding, Weman, K.XII-1558-98, The Status Of Welding Mechanisation And Automation In Middle And Small Size Shipyards (II), Boekholt, R.XII-1559-98, A Fast And Economical Calibration System For Welding Power Sources, Rehfeldt, D. and Wittkopf, R.XII-1560-98, Sensing And Controlling Weld Pool In Multi-Layered Welding Using Visual Intelligent Robot, Oshima, K., Eguchi, K., Yamane, S., Sugi, H. and Kubota, T.XII-1565-99, Prospects By Combining And Coupling Laser Beam And Arc Welding Processes,

Page 204

Dilthey, U.XII-1580-99, Application Of Seam Tracking System By Image Processing To Welding Of Membrane Of Inground LNG Tank, Iguchi, M., Iijima, T., Tejima, A., Makita, M. and Imamura, K.XII-1620-00, Exploiting The A-TIG Process For Welding Pipe-Work In Shipbuilding, Lucas, W. and Cooper, M.XII-1622-00, Development Of Narrow Gap TIG Welding System With Multi-Head For Circumferential Joint, Kazuhito, K., Kamo, K., Wakayama, T. and Fujita, K.XII-1623-00, Agile Welding Automation, Leino, K.XII-1624-00, Development Of Portable GTAW Robot System For On-Site Maintenance Of Reactor Internals, Asai, S., Taki, K., Tsuboi, R., Aoyama, K. and Kobayashi, M.XII-1625-00, Development Of Multi-Root Welding System For Sub-Assembly In Shipbuilding, Fujimoto, M., Takeichi, M., Tanaka, M. and Yamamoto, T.XII-1626-00, Sensing And Control Of Weld Pool In One Side Robotic Welding, Oshima, K., Sharif, L.H., Hino, Y., Eguchi, K., Kubota, T. and Yamane, S.XII-1627-00, Characterization Of A Welding Procedure Based On Monitoring Of Welding Variables, Lukacevic, Z., Samardzic, I. and Siewert, T.XII-1629-00, Improve Sheet Metal Welding Quality And Productivity With AC Pulsed MIG Welding System, Ueyama, T., Tong, H., Harada, S. and Ushio, M.XII-1631-00, Development Of Automatic Welding Process For Ship's Bottom Shell Plate, Nishi, Y., Sano, T., Sugitani, Y. and Murayama, H.XII-1632-00, Report Of Working Group Shipbuilding, Boekholt, R.XII-1636-00, Magnetic Pulse Solid State Welding, Shribman, V., Livshitz, Y. and Gafri, O.XII-1637-00, Investigation On High-Temperature Performance Of Weld Metals Of Stainless Steel Flux-Cored Wires, Okazaki, T. et al.XII-1638-00, Investigation On Trends And Needs In The Usage Of MAF/MIG Welding Consumables For Steel Structure And Bridge Fabricators, Miyake, T. et al.XII-1639-00, International Institute Of Welding Survey Of Trends Of Welding Materials And Processes, Tsutsumi, S. and Tachibana, T.XII-1641-00, Automatic Pipeline GMA Welding Technology For High Efficiency And Intellectualization, Sugitani, Y., Kaneyama, K., Murayama, M. and Ozamoto, S.XII-1642-00, Computerized Welding System For Cross-Country Pipeline, Rinaldi, F. and Bujivoets, J.G.XII-1643-00, Fast Automatic Welding System For Gas Pipeline, Ikuno, Y., Furukawa, Y., Kodama, S. and Maeda, T.XII-1644-00, Advanced Welding Processes For Transmission Pipelines, Blackman, S.A. and Dorling, D.V.XII-1645-00, A New ERW And SAW Combined Process For Spiral Pipe Manufacturing, Tanaka, T., Ohara, M., Mizuhashi, N. and Majima, H.XII-1646-00, Capabilities And Limitations Of FCAW-S, Dallam, C., Quintana, M. and van der Mee, V.XII-1647-00, State Of The Art GMAW Wires For Pipeline Construction In Japan, Nakano, T., Sugitani, Y., Kaneyama, K. and Ushio, M.XII-1648-00, Nd: YAG Laser Welding Of High Strength Steel Pipelines, Yapp, D., Denney, P., Eastman, J. and Jhonson, M.XII-1660-00, Application Of Narrow Gap GTAW For Vessel And Pipe In Power Plants, Asai, S., Taki, K., Tsuboi, R. and Ogawa, T.

Page 205

XII-178-63, Procedure Condition Of Electroslag Welding On Application For Pressure Vessel, Ujiie, A., Sato, S. and Nagaoka, T.XII-223-64, Some Observation On The Application Of Electro-Slag And Electro-Gas Arc Welding Process For Actual Steel Construction, Oba, H., Miki, S., Murase, T., Susei, S., Fujishiro, Y. and Minakata, S.XII-226-65, Electroslag Welding In Shipbuilding -Automatic Vertical Welding For Hull Side Shell, Araki, M., Nomura, H. and Mimura, M.XII-280-65, The Application Of Electro-Slag Welding In Manufacturing The 12000-Ton Hydraulic Forging Press, Ying-ping, T. and Ta-yu, S.XII-314-66, Study On Submerged Arc Welding For HT-80 Steel, Onoe, H.XII-315-66, Study On Hot-Cracking Of Austenitic Stainless Steel In Overlay Welding, Ujiie, A., Sato, S., Nagaoka, T., Shono, S. and Yoshimasu, T.XII-316-66, The Narrow-Gap MIG Welding Process For Thick Steel Plates, Kurokawa, T., Nakajima, M., Ishikawa, Y. and Urayama, A.XII-318-66, Improvement Of MIG Spot Welding Of Aluminium Alloys -Effect Of Oxygen Addition To Shielding Gas-, Uchida, A., Sugawara, R. and Teramoto, T.XII-319-66, Electro-Slag Welding With Coated Consumable Nozzle, Matsuoka, T., Suzuki, H., Araki, M. and Murai, K.XII-323-66, Electroslag Welding Of Large Hydro-Generator Shaft With Powder-Metal Nozzle-Plates Supplying Alloying Elements, I-Chung-I, L., Chin-kang, C. and Yen-liang, L.XII-325-66, Porosity In TIG Welded Aluminum And Aluminum-Magnesium Alloy Welds, Chia-lieh, J., Chih-ch'ang, L. and Wu-chu, C.XII-327-66, Low Temperature Friction Welding Of Aluminum To Copper, Fei-chang, N.XII-335-66, Pulsed Arc Welding Of Thick QT.35 Plate, Bentley, K.P.XII-341-66, Electro-Slag Welding With Consumable Nozzle Of Heavy Steel Cast Frames For Hydraulic Presses, Kyas, J.XII-358-66, Study Of The Influence Of Thermal Changes In The Heat Affected Zones Of The Base Metal In Electroslag Welding, Malinovska, E. and Hrivnak, I.XII-359-66, Material Problems Associated With The Weldability Of Low-Carbon, Low-Alloy Steels, Hrivnak, I.XII-391-67, One Side Submerged Arc Welding Process With Double Layers Flux Backing, Mizoguchi, S., Sugioka, I. and Kasugai, M.XII-392-67, A Study On One-Side Automatic Tandem Arc Welding, Ichikawa, Y., Kawasaki, M.and Sato, M.XII-394-67, Submerged Arc Welding Of ASTM-A302Gr. B Heavy Plate For Atomic Reactor Vessel, Okada, K., Mizoguchi, S. and Ito, T.XII-398-67, Fundamental Research On Notch Toughness Of Heavy Deposited Metal By Submerged Arc Welding Process, Nakamura, H. And Ota, I.XII-412-83, Resource-Saving Technology Of Automatic Welding Of Main Pipelines With Flux-Cored Wire And At Forced Weld Formation, Pokhodnya, I.K., Dubovetsky, V.Ya., Shlepakov, V.N., Orlov, L.N., Kutovoy, A.N., Mazel, A.G. and Sheinkin, M.Z.XII-417-68, High Current Non-Shielded Arc Welding, Kobayashi, T.XII-418-68, Fundamental Research On One-Side Arc Welding, Inagaki, M. and Okada, A.XII-419-68, The Consumable Nozzle Electroslag Welding Process With Movable Current Terminal, Sato, M., Nakajima, M., Ishikawa, Y. and Shimamoto, T.XII-420-68, Evaluation Of Electroslag-Welded Pressure Vessels, Becka, Z., Libra, O., Makovicky, V. and Pawera, K.

Page 206

XII-424-68, Comparative Tests With Filler Metals And Fluxes For Electroslag Welding, Eichhorn, F. and Shaheeb, A.R.XII-425-68, The Effect Of Type Of Welding Process On Strength Of 5083 Aluminum -How To Use Various Welding Processes In 5083 Al-Alloy Welding-, Ujiie, A., Matsuda, K., Sato, S. andWakamatsu, K.XII-442-68, Four-Electrode One-Side Automatic Welding Technique, Ariyoshi, H., Onoe, H. and Kurihara, Y.XII-456-68, Fundamental Research On One-Side Arc Welding (Report 2) -A Method For Determining The Optimum Welding Condition Under The Given Groove Condition-, Inagaki, M. and Okada, A.XII-457-68, Multi-Electrode One Side Automatic Submerged Arc Welding, Terai, K., Yamada, S., Suzawa, R., Okada, H. and Nagai, Y.XII-458-68, Recent Technical Achievements On One-Side Welding, Arikawa, M., Kano, M., Okuda, N., Iio, K. and Shioyama, H.XII-460-68, Submerged Arc Welding Of 9% Ni Steel, Ito, Y. and Koizumi, I.XII-464-68-B, Some Experiments As To The Influence Of Wire Alloying Elements (Ti) On The Usability Of CO2 Gas-Shielded Arc Welding, Tsukamoto, H. and Oku, T.XII-466-68, Automatic Vertical Welding With Variable - Speed - Controlled Wire Feeding, Ito, T., Nishi, T. and Hidaka, T.XII-467-68, Argon-Nitrogen-Gas Metal-Arc Welding Of Aluminum, Kobayashi, T., Kuwana, T. and Aoshima, I.XII-468-68, Development Of New Metal Forming Technique Using Electroslag Welding Process, Ujiie, A., Nagata, J., Nagaoka, T. and Sakamoto, N.XII-469-68, Simplified Electro-Slag Welding Method For T-Joint (TES Process), Nakakubo, I., Okada, K. and Kanbe, Y.XII-470-68, Consumable Nozzle Electro-Slag Welding Applied The Long Sized Joint Of Relatively Thin Plates, Arikawa, M., Kano, M. and Watanabe, T.XII-475-69, Study Of The Influence Of Filler Metals And Welding Current Type On The Properties Of The Weld Metal On Electroslag Welding, Eichhorn, F., Shaheeb, A.R. and Zeke,J.XII-476-69, Electroslag Welding Of Heavy Sections, Zeke, J., Slabon, I. and Mosny, J.XII-477-69, Characteristics And Technological Particularities Of Electroslag Surfacing Of Rolls,Blaskovic, P.XII-481-69, Recommendations For The Submerged Arc Cladding With Stainless Steel Strip Electrodes, Wolff, L.P.XII-490-69, Cored Wire And Strip Electrodes For Mechanized Open-Arc Surfacing, Frumin, I.I. and Yuzvenko, Yu.A.XII-493-69, Comparison Of Data For Short Circuit Arc Welding, Anon.XII-494-69, Instrumentation For Gas Shielded Arcs, Anon.XII-498-69, The Influence Of Titanium And Of The Flux Composition On The Notch Toughness Of Welds At The Structural Electroslag-Welded Steels, Stular, P.XII-503-69, Aspects Of Electroslag Remelting Application For Production Of Cast-Welded Products, Paton, B.E., Medovar, B.I., Kumish, I.I. and Chekotilo, L.V.XII-506-69, Final Report On The Attitude Of Classification Societies To Electroslag Welding, Lanyi, L.XII-510-70-E, The Influence Of The Welding Conditions On The Notch Toughness Of MIG-CO2 Weld Metal, Konkoly, T.

Page 207

XII-512-70, Classification And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Structural Steels, Anon.XII-513-70, Four-Electrode Fillet Welding For Wash-Primer Coated Plates In Shipbuilding, Araki, M., Ozawa, N., Nomura, H., Ueno, T., Komiyama, T. and Arikawa, M.XII-532-71, Operating Procedures For The Deposition Of Sound Welds In MIG/CO2 Pipe Welding, Boekholt, R.XII-585-74, Vanadium In Mild-Steel Weld-Metal, Hannerz, N.E. and Jonsson-Holmquist, B.M.XII-615-75, Measurement And Recording Of Welding Currents, Prischi, G.XII-622-76, Highly Efficient Automatic Welding Processes For 5083 Aluminum Alloy Thick Plates, Kimura, S., Kano, M. and Tomita, M.XII-624-76, Classifications And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Mild And Low Alloy Steels, Anon.XII-625-76, Code Of Symbols. Electrode Wires For Submerged Arc Welding Of High Temperature Resistant Steels, Anon.XII-626-76, Code Of Symbols. Electrode Wires For Submerged Arc Welding Of Stainless AndOther Similar High Alloy Steels, Anon.XII-628-76, Characteristics Of High Frequency Pulsed DC TIG Welding Process, Shimada, W.and Gotoh, T.XII-629-76, Classification Of Filler Wires And Fluxes For Electroslag Welding And Guide For The Testing Of Weld Metal, Zeke, J.XII-631-76E, Classification Of Shielded Gases Used In The Gas Shielded Arc Welding Of Ferrous Metals - On The Basis Of Their Oxidation Potential, Smith, A.A.XII-632-76, Application Of Narrow-Gap Automatic CO2 Arc Weaving Horizontal Position Welding Process To Heavy Steel Structures Of Building, Nakayama, H., Matsumoto, M., Futamura, K., Nakamura, T. and Inagaki, M.XII-633-76, Vertical Narrow Gap Arc Welding Process With Modulated Welding Current, Morigaki, O., Hoshi, R., Kanbe, Y., Yamashita, K. and Nagatomo, K.XII-634-76, Narrow Gap Welding With An In-Gap Gas Shielded System, Liddell, M.J. and Wright, R.R.XII-635-76, Electro-Gas Arc Welding Of Inclined Joints With Magnetic Control, Kano, M., Watanabe, T. and Maruyama, T.XII-636-76, Commission XII, Sub-Commission F. Power Sources, Ruckdeschel, W.E.W.XII-638-76, Recommendations For The Classification And Symbolisation Of Flux-Cored Electrode Wires For Gas- And Self-Shielded Arc Welding Structural Steels, Anon.XII-639-76, Recommended Methods Of Reporting Weld Metal Hydrogen Contents, Anon.XII-640-76, Automatic Welding For An LNG Storage Tank Of 9% Nickel Steel, Kuriyama, Y., Kohno, T., Toyomasu, K., Katayama, N. and Yokokura, M.XII-641-76, Welding Micro-Alloyed High Tensile Steel With A Basic Type Flux Cored Wire, Boekholt, R. and Bosman, A.W.M.XII-643-76, Hydrogen And Cracking In ESW Weld Metals, Nakano, S., Tamaki, K. and Tsuboi,J.XII-659-77, A New-Toughness Automatic Tandem Multiple-Wire One Side Welding Process For Ship Hull Plates, Kawai, H., Kobayashi, M., Hayashida, T., Iwabuti, H. and Sakai, E.XII-666-77, Classification And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Structural Steels, Anon.XII-667-77, Code Of Symbols. Electrode Wires For Submerged Arc Welding Of High Temperature Resistant Steels, Anon.

Page 208

XII-668-77, Code Of Symbols. Electrode Wires For Submerged Arc Welding Of Stainless AndOther Similar High Alloy Steels, Anon.XII-669-77, Classification Of Shielding Gases Used In Gas Shielded Arc Welding Of Ferrous Metals On The Basis Of Their Oxidation Potential, Smith, A.A.XII-670-77, Recommendations For The Symbolization Of Wire Electrodes For Welding Structural Steels, Creep Resisting Steels And High Alloy Steels, Anon.XII-694-77, Effect Of Micro-Alloying Elements On Toughness Of Steel Weld Metal, Masumoto,I.XII-704-79, Flux And Gas Shielded Arc Welding Processes, De Sancy, A.XII-744-81, Review Of New Designs Of Power Sources For Arc Welding Processes, Anon.XII-744-81, Review Of New Designs Of Power Sources For Arc Welding Processes, Anon.XII-745-81, Instrumentation For Control In Arc Welding, Needham, J.C.XII-761-82, Comment On Document XII-D-1-81 - Classification Of Wire Electrodes, Fluxes And Shielding Gases For Submerged Arc And Gas Shielded Metal Arc Welding Of Mild And Low Alloy Steels, Anon.XII-762-82, Microcomputer Supported Tactile Sensing System For Adaptive Seam Tracing In Automated Arc Welding System, Presern, S. and Spegel, M.XII-778-82, Inert Gas Absorption By The Steel Weld Pool, Svetsinsky, V.G., Rimsky, S.T., Smiyan, O.D. and Shalaev, A.M.XII-779-82, Peculiarities Of Metal Interaction With Nitrogen In MAG-Welding In Argon-Based Mixtures, Svetsinsky, V.F. and Rimsky, S.T.XII-780-82, The Effect Of Electrically Negative Elements On The Penetration Of Steels In Argon-Arc Welding, Savitskii, M.M. and Leskov, G.I.XII-799-83, The Mechanised Submerged-Arc Welding Of Thick Metal With A Narrow Gap, Tsaryuk, A.K., Kasatkin, B.S., Ivanenko, V.D., German, S.I., Levenberg, N.E., Volyuchenko, N.P. and Bugaets, A.A.XII-802-83, Precalculation Of Weld Metal Composition In Submerged-Arc Welding, Their, H.XII-803-83, Recommendations For Expressing The Flux Basicity Index By Means Of The Oxygen Anion Ionic Fraction, Zeke, J.XII-804-83, Submerged-Arc Welding With Metal Powder Additions, Eichhorn, F. and Kerkmann, M.XII-805-83, Soudage TIG Et MIG Des Aciers, Anon.XII-807-83, Application Of Narrow-Gap GTA Welding Process To The Welding Of Large Type Stainless Steel Nuclear Pressure Vessels, Uratani, Y., Oka, K., Matsumoto, O., Nagura, Y. and Kawaguchi, S.XII-810-83, Resource-Saving Technology Of Automatic Welding Of Main Pipelines With Flux-Cored Wire And At Forced Weld Formation, Pokhodnya, I.K., Dubovetsky, V.Ya., Shlepakov, V.N., Orlov, L.N., Kutovoy, A.N., Mazel, A.G. and Sheinkin, M.Z.XII-811-83, TIG Pipe Welding Without Filler Wire, Roschin, V.V., Ischenko, Yu.S., Bukarov, V.A. and Khavanov, V.A.XII-823-84, Automatic TIG Penetration Welding Of Stainless Steel Pipe, Hirayama, S., Nakano, M. and Yamamoto, S.XII-824-84, Factors Controlling MIG Weld Metal Chemistry, Grong, (. and Christensen, N.XII-825-84, Can QA Apply To Arc Welding Procedures?, Needham, J.C.XII-826-84, Processes For Welding Large Diameter Pipes: Improvement In Productivity And Weld Quality, Poli, A. and Rosellini, C.XII-827-84, Automatic Control System For One-Side Submerged Arc Welding With Flux

Page 209

Copper Backing, Kenko, S., Okui, N., Fujimoto, A., Iwabe, T., Sakiyama, K. and Mino, M.XII-828-84, Development And Application Of SAW System With Microcomputer, Akashi, H., Shibata, Y. and Tamaoki, M.XII-830-84, Questionnaire: Narrow Gap Welding, Anon.XII-831-84, The Determination Of The Hydrogen Content Of Ferritic Arc Weld Metal, Anon.XII-832-84, Standardisation Of Shielding Gas Mixtures For MIG/MAG Welding, Shackleton, D.N. and Smith, A.A.XII-839-84, Welding Of Aluminum With Variable Polarity Power, Tomsic, M.J., Barhorst, S.E. and Cary, H.B.XII-840-84, Compositional Specification For Wire Rod For The Manufacture Of Carbon And Low Alloy Steel Submerged Arc Welding Wire, Anon.XII-841-84, Compositional Specification For Wire Rod For The Manufacture Of Carbon And Low Alloy Steel Gas Shielded Metal Arc Welding Wire, Anon.XII-842-84, Recommendations For The Levels Of Copper In Welding Wire, Shackleton, D.N.XII-843-84, Process Stability In MIG Welding, Lucas, W., Ahmed, N. and Hutt, G.A.XII-844-84, Weld Repairing Of Steam Turbine Rotors, Amos, D.R., Clark, R.E. and Kramer, L.D.XII-845-84, Wire Feed System For Arc Welding Robot. State Of The Art In Japan., Anon.XII-847-84, Preliminary Report On Experimental Study On Narrow Gap Submerged Arc Welding Of Stainless Steel Welded Joints, Giacomelli, M.XII-850-84, Performance Process, Anon.XII-860-85, A Study Of Current Waveform And Technological Characteristics Of Pulsed Dip Transfer, Giushen, Ji., Siqian, C. and Dingfu, Z.XII-864-85, List Of Members, Anon.XII-865-85, The International Approach To Prequalified Welding Procedures - Report February1984, Anon.XII-866-85, Contributions To The Theory Of Concentration Of Any Element In The Cladding Layers Deposited By Submerged-Arc Welding With Strip Electrodes, Popovits, D. and Subu, T.XII-867-85, Sensors For Arc Welding, Drews, P., Frassek, B. and Willms, K.XII-868-85, A Study Of Current Waveform And Technological Characteristics Of Pulsed Dip Transfer, Giushen, Ji., Siqian, C. and Dingfu, Z.XII-869-85, Off-Line Weld Programming Using Robot Language Based On Geometrical Model Of The Work, Maekawa, H., Makino, Y., Kiga, T., Iijima, T. and Nakata, S.XII-870-85, Development And Application Of All-Position Automatic GMA Welding Procedure For Main Stream Piping Of Thermal Power Plant, Yahata, H., Maruoka, K., Kamo, K. and Nagura, Y.XII-871-85, Development Of HARO-GMA Welding Process And Application To Root Pass Welding, Shono, S., Sakamoto, N., Kamei, H., Ishide, T. and Sugimoto, Y.XII-872-85, Electroslag Overlay Welding With Strip Electrode And Present Status Of The Application To Japanese Industries, Masumoto, I., Hirose, M., Nakano, S. and Takeba, K.XII-873-85, Development Of The Parameter Generating System For Arc Welding Based On Heat Conduction Analysis, Kikushima, S.XII-874-85, New Techniques For Electroslag-Negative Shielded Gas Arc Welding Process For Thin-Gage Steel Plates In Automobile Body Production, Tamura, Y. and Kondo, M.XII-876-85, Annual Report Of Commission XII. Aachen, January 1985, Drews, P.XII-877-85, Development Of An Automatic TIG Welding System For Non-Circular Pipes,

Page 210

Tanioka, S., Nakano, M., Yamaoka, A., Tejima, A., Shiina, I. and Okukawa, M.XII-878-85, Development Of The Inverter Controlled DC TIG Arc Welding Power Source, Kashima, T., Yamanaka, Y., Mita, T., Fukui, H. and Araya, T.XII-879-85, Dual Frequency Pulsed MIG All-Position Automatic Welding Of Thick-Wall Pipes With Transistorized Power Source Control, Wenhui, C., Junren, H., Yongje, W., Yongyuag, S. and Wenjun, D.XII-880-85, Development Of Arc-Welding Robot For Nozzle Of Boiler Drum, Wakamatsu, K., Shimoyama, H., Shirouzu, K., Ono, H., Abe, T. and Izunami, K.XII-881-85, Robotic Welding Of Large-Size Structures, Fujimura, H., Hashimoto, K., Ide, E. and Inoue, H.XII-882-85, Short-Circuit CO2 Welding With Combined Control Of Current Wave And Wire Feed, Qilong, W., Shuyan, Y., Zeping, Z. and Weiyan, J.XII-883-85, Back Bead Width Control In One Side SAW using Flux Copper Backing -Correlation Between Back Bead Width And The Voltage Which Measured Between Base Plate And Copper Backing (report 1)-, Nomura, H., Sato, Y. and Satoh, Y.XII-884-85, Automatic Real-Time Bead Height Control With Arc Sensor In TIG Welding, Nomura, H., Sugitani, Y. and Suzuki, Y.XII-885-85, Influence Of Shielding Gas Composition On GMAW Of Stainless Steel, Quintino, L. and Oliveria Santos, J.F.XII-886-85, Effect Of Welding Parameters On Weld Quality In Fully Mechanized MAG Welding(GMAW), Stenke, V.XII-887-85, Sensors In Automatic Arc Welding Summary Of Recent Work In IIW Commission XII, Linden, G. and Widfeldt, M.XII-888-85, The Influence Of Welding Deformations On Tolerance Requirements In Automatic Butt Welding, Jonsson, M., Karlsson, L. and Lindgren, L-E.XII-889-85, Gas Metal Arc Welding (GMAW = MAG) Of Fine Frain Structural Steels, Anon.XII-890-85, Annual Report To The Strasbourg Assembly 1985, Daemen, R.XII-891-85, Literature Survey On The Subject Of Electroslag Strip Cladding, Daemen, R.XII-892-85, Framework Of The Future Document On Electroslag Strip Cladding (draft proposal), Anon.XII-893-85, AGENDA. Annual Assembly, Strasbourg, France, 4-6 September, 1985, Smith, A.A.XII-894-85, Experimental Determination Of The Thermal-Kinetic Factor Of Welding ConditionsAs Temperature Equivalent, Zeke, J. and Mikula, K.XII-895-85, Study Of The Effect Of Welding Fluxes On Hydrogen And Oxygen Contents In TheWeld Metal, Zeke, J. and Biacovsky, S.XII-896-85, Notch Toughness Of Weld Metal As The Function Of Oxygen Content, Zeke, J. and Pikna, E.XII-897-85, Fluxes For Welding And Special Electrometallurgy, Podgaetsky, V.V.XII-898-85, Steel Arc Welding Metallurgy And Welding Consumables, Pokhodnya, I.K.XII-899-85, Interpolation Models For Evaluating The HAZ Phase Composition In Low-Alloy Steel Arc Welding, Kasatkin, O.G. and Seyffarth, P.XII-900-85, Effect Of HAZ Chemical and Phase Composition On Its Mechanical Properties In Low-Alloy Steel Arc Welding, Kasatkin, O.G. and Seyffarth, P.XII-901-85, Properties Of Weld Joints Made By Self-Compression Method, Roschin, V.V., Ischenko, Yu.S., Bukarov, V.A. and Khavanov, V.A.XII-902-85, A New Optical Method Of Measurement For Seam Tracking Sensor In Arc

Page 211

Welding, Drews, P., Fangdian, HE and Willms, K.XII-903-85, Intermediate Meeting Held At The Danish Welding Institute, Copenhagen, 11th/12th April 1985, Needham, J.C.XII-904-85, List Of Documents Issued Since Doc. XII-860-84, Anon.XII-905-85, Synergic Power Supplies - Classification And Questionnaire, Anon.XII-909-85, Analysis Of CO2 Welding Process Of Thin Plates, Koves, A.XII-911-85, Pulsed MIG Welding Of Stainless Steel, Oliveria Santos, J.F.XII-919-85, Interim Report For Strasbourg Annual Assembly On Applications Of Narrow Gap Welding, Ellis, D.J.XII-920-86, IIW Commission XII Annual Assembly. Strasbourg, 4-6 September 1985, Anon.XII-928-86, Practical Application Of The Mathematical Relations Concerning The Concentration Of Chemical Elements In The Submerged Arc Strip Cladding, Popovits, D. and Subu, T.XII-929-86, Gas Tungsten Arc Welding Of Aluminum In Asymmetric Wave AC With Transistor Inverter Controlled, Honda, K., Fuse, T., Takenaka, K., Mizutame, M. and Yamamoto, H.XII-930-86, A Newly Developed Arc Welding Power Source And Its Application In CombinationWith Arc Welding Robots, Ogasawara, T., Maruyama, T., Sato, M. and Hida, Y.XII-931-86, Through The Arc Sensing System For GMA One Side Welding, Kitazawa, Y., Nagai, Y. and Watanabe, T.XII-932-86, A Fluctuation Of Wire Feed Rate In Gas Shielded Arc Welding, Yamada, T. and Tanaka, O.XII-933-86, Root Pass Welding Of Pipes Without Internal Gas Purging -Flux Cored Welding Rod For Gas Tungsten Arc Welding-, Tanaka, O., Takeba, K., Matsushita, Y. and Koshiishi, F.XII-936-86, GMA Welding Of Filler Passes With A New Type Of Arc Controlled Seam TrackingSystem, Eichhorn, F., Blasig, K. and Platz, J.XII-937-86, System-Design Of Weld Heat Conduction Simulator By Interactive Personal Computer, Okada, A., Kasugai, T., Ei, K., Muramatsu, Y., Hiraoka, K. and Inagaki, M.XII-938-86, Electroslag Strip Cladding, Daemen, R.XII-939-86, Development Of Automatic Fillet Welding Process With High Speed Rotating Arc, Nomura, H., Sugitani, Y. and Murayama, M.XII-940-86, Development Of Multi-Pass MAG Arc Welding System With Adaptive Control By Arc Sensor, Nomura, H., Sugitani, Y. and Tamaoki, N.XII-941-86, Welding Technology Of Manufacturing Heavyer Wall Pipe Piles For Offshore Oil Production Jacket, Hirabayashi, K., Harasawa, H., Kobayashi, H., Sato, Y., Yoshida, S. and Yasuoka, T.XII-942-86, Joining Of Bi-Metal Tube Of Aluminum Alloy And Titanium To Titanium Tube PlateBy Welding Process, Sugiyama, Y. and Nanba, K.XII-943-86, Weld Bead Shape In Pulsed Gas Metal Arc Welding, Quintino, L., Oliveria Santos,J.F. and Allum, C.J.XII-944-86, Development Of Automatic Welding System Of Seal Welding For Condenser Made Of Titanium, Kanao, H., Kato, S., Yamamoto, S., Kimura, K., Kamei, H. and Nishikawa, Y.XII-946-86, Study On The Prevention Of Weld Defects For Austenitic Stainless Steel By Magnetic Stirring, Ohmae, T., Wakamoto, I., Nagareda, M. and Aoki, M.XII-947-86, Application Of Robots For Welding Of Large Scale Steel Structures, Wada, H., Manabe, Y., Yagi, T. and Yamaguchi, H.XII-949-86, Seam Tracking With Welding Arc As A Sensor In The PAW Process, Baba, N.,

Page 212

Tachikawa, H., Kohno, R. and Kakimoto, E.XII-950-86, Development Of New Narrow-Gap Welding Process, Fujimura, H., Ide, E., Inoue, H. and Kodama, M.XII-951-86, On The IIW International Conference On Automation And Robotization In Welding And Allied Process, Girardi, U. and Konkoly, T.XII-952-86, Result Of Investigation On Application Of Gas Shield Arc Welding For Pressure Vessel Fabrication, Anon.XII-953-86, Measures For Toughness Improvement Of Heavy Walled UOE Pipe's Submerged Arc Weld Metal, Kawabata, F., Sakaguchi, S., Matsuyama, J. and Nishiyama, N.XII-954-86, Arc Sensor For Welding Line Tracking Applied To Welding Robot, Nakajima, J.XII-955-86, A Development Of Automatic Remote Control TIG Welding System With Image Processing Technique, Watanabe, H., Kondo, Y. and Inoue, K.XII-956-86, A Development Of Hot Wire Switching TIG (HST) Welding Process, Hori, K., Myoga, T., Kawahara, M., Takuwa, T., Kondo, Y. and Kusano, K.XII-957-86, Study Of Al And Ti Transfer From Slags To Metal, Opravil, O. and Zeke, J.XII-958-86, Submerged Arc Narrow Gap Welding, Malinovska, E. and Pikna, E.XII-959-86, Present Status And Problems In Application Of Arc Welding Robot, Matsui, S., Yokoshima, N. and Noda, N.XII-961-86, Narrow Gap Welding (NGW). State Of The Art In Japan, Anon.XII-962-86, Development And Application Of Sensors And Sensor Systems For Arc Welding InJapan (Part 2), Wakamatsu, H., Iochi, A., Wakamatsu, K., Nomura, H. and Sato, Y.XII-964-86, Gas Metal Arc Welding (GMAW = MAG) Of Heavy-Gauge Mild And Low Alloy Structural Steels, Anon.XII-965-86, Development Of Fully Automatic Pipe Welding System, Tanioka, S.-I., Tejima, A., Saito, T., Nakano, M., Yamada, M., Saito, Y. and Abe, R.XII-967-86, Control In Short-Circuit MIG Arc Welding, Needham, J.C.XII-968-86, What Do You Mean By Current? What Do you Mean By Voltage?, Needham, J.C.XII-969-86, Minutes Of The Intermediate Meeting Rome, 7/8 April, 1986, Anon.XII-971-86, Annual Assembly, Tokyo, Japan, 12-19 July, 1986, Smith, A.A.XII-972-86, Annual Report Of Commission XII. Aachen, January 1986, Anon.XII-974-86, List Of Delegates Commission XII, Anon.XII-975-86, List Of Documents Commission XII, Anon.XII-976-86, Investigations On The Acceptance Of Hydrogen And Nitrogen From The Root Shielding Gas With TIG Welding, Farwer, A. and Killing, R.XII-985-86, Possibilities Of Notch Toughness Improvement In CO2 Welding, Ondrejcek, P. and Pikna, M.XII-986-86, Development Of A High Strength Gas Shielded FCAW Electrode For High Toughness Applications, Gonzalez, J.C., de Vedia, L.A. and Biloni, H.XII-987-86, Mechanical Property Requirements In Different National Standards For Solid Carbon And Low Alloy Steel Gas Metal Arc Welding Wire, Rigdal, S. and Gustafsson, B-O.XII-988-86, Mechanical Property Requirements In Different National Standards For Flux CoredWires For Welding Of Carbon And Low Alloy Steels, Rigdal, S. and Gustafsson, B-O.XII-989-86, Mechanical Property Requirements In Different National Standards For Flux/Wire-Combination For Submerged Arc Welding Of Carbon And Low Alloy Steels, Wittung, L.XII-990-86, Research On The Mathematical Model And The Controllability Of GTA Welding Arc, Jiarui, Z. and Yidan, L.

Page 213

XII-991-86, Study On The Cohesive Backing For One -Side Welding With Good Back-Side Contour, Jinru, L. and Guoming, H.XII-993-86, The Situation Concerning Robotics And Welding Automation In Sweden, Widfeldt, M.XII-996-86, Evolution Of Power Sources In Arc Welding - Growth From Passive To Active Role, Needham, J.C.XII-997-86, Estimation Of Energy Parameters Of Welding Circuit, Kasatkin, O.G.XII-998-86, Development Of Real Time Welding Control System By Using Image Processing, Yada, Y., Takahashi, Y., Koide, H., Morisawa, J., Kobayashi, M. and Koyama, T.XII-999-86, Annual Report Of Commission XII. January 1987, Anon.XII-A-102-74, Some Investigations On Bonded Type Fluxes According To IIW-Doc. XII-A-96-74, Anon.XII-A-103-74, Remarks On Doc.XII-A-76-73 Schedule Of Information On Submerged-Arc Fluxes, Dutch Delegation.XII-A-104-74, Chemical Influence Of Fluxes On The Weld Metal, Penche, C.XII-A-105-74, Determination Des Gains Et Des Pertes En Mn Et Si Des Flux UM D'Apres Le DOC XII-A-88-74, Anon.XII-A-106-74, Calculation In Accordance With, And Remarks On DOC. XII-A-96-74, Zeke, J.XII-A-109-75, Comment To Proposals For The Designation Of Submerged Arc Fluxes For C-Mn And Low Alloy Steels, Anon.XII-A-113-75, Study On Charpy Impact Properties Of Weld Metal With Submerged Arc Welding, Ito, Y. and Nakanishi, M.XII-A-116-75, Classification And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Mild And Low Alloy Steels, Anon.XII-A-11-81, Present State And Characteristics Of Czechoslovak Fused Fluxes, Pikna, E. and Malinovska, E.XII-A-119-75, Properties Of Mild-Steel Submerged-Arc Welds Made With Neutral And Basic Fluxes, Wegrzyn, J.XII-A-120-75, Position Of The Spanish Delegation Concerning The Designation Of SubmergedArc Fluxes For C-Mn And Low Alloy Steels, Penche, C.XII-A-121-75, Remarks Of The Dutch Delegation To Doc. XII-A-116-75. Classification And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Mild And Low Alloy Steels, Par. 3. Welding Fluxes, Anon.XII-A-123-75, A Study On The Behavior Of Diffusible Hydrogen And Weld Cracking In Thick Weldments, Nishio, Y., Yoshida, Y. and Miura, Y.XII-A-129-76, Effects OF Ti and B On Notch Toughness Of Low Alloy Steel Weld Metal, Kano,M., Tanaka, H., Yamada, M. and Izuchi, S.XII-A-132-76, Specification For Bare Carbon Steel Electrodes And Fluxes For Submerged Arc Welding, Anon.XII-A-133-76, Specification For Bare Low-Alloy Steel Electrodes And Fluxes For Submerged Arc Welding, Anon.XII-A-134-76, Selecting Submerged Arc Fluxes For Carbon And Low Alloy Steels, Wittstock, G.G.XII-A-138-77, A New Submerged Arc Welding Flux For Offshore Structure In Arctic Use, Shinmyo, K., Saito, S., Mori, N., Takami, T. and Kono, R.XII-A-141-77, Recommendations For The Symbolization Of Wire Electrodes For Welding Structural Steels, Creep Resisting Steels And High Alloy Steels, Thomas, D.

Page 214

XII-A-143-77, Submerged Arc Welding Of HSLA Steels For Low-Temperature Service, Thomas, D.XII-A-144-77, The Effect Of Minor Additions Of Vanadium And Niobium In The Submerged-Arc Weld Metal On Its Mechanical Properties And Resistance To Brittle Fracture, Wegrzyn, J. and Dziubinski, J.XII-A-145-77, Weldability Of Microalloyed Steels, Wegrzyn, J.XII-A-155-78, High Speed Welding Process By Three-Electrode Submerged-Arc, Akahide, K., Agusa, K., Ukibe, T. and Tsuboi, J.XII-A-156-78, Three-Wire Submerged-Arc Welding Of Line Pipe, Uttrachi, G.D. and Messina, J.E.XII-A-158-78, Triple Wire Submerged Arc Welding Of 25mm Steel Plate, Jones, S.B.XII-A-160-78, Development Of Welding Technique For Longitudinal Welded Large-Diameter Pipe Production, Duren, C.F., Hieber, G. and Wiedenhoff, W.W.XII-A-174-79, Zeke's Hypothesis Test On The System Of Wires And Sintered Agglomerated Powders At Submerged Arc Welding, Limpel, I.XII-A-21-70, Prediction Of Chemical Compositions Of Submerged-Arc Welds, Tsunetomi, E. and Fujita, H.XII-A-22-70, A Metallurgical Aspect Of Hot Cracking And Toughness Of Weld Metal, Masumoto, I. and Imai, K.XII-A-30-71, A Study Of Variables Influencing The Toughness Of Weld Metal, Nakamura, H. and Naiki, T.XII-A-36-71, Relationship Between Silicon And Manganese Reactions In Submerged Arc Welding, Zeke, J. and Janosiova, J.XII-A-37-71, The Question Of Silicon And Manganese Reactions In Submerged Arc Welding, Zeke, J.XII-A-3-81, New Submerged Arc Welding Technique For 21/4Cr-1Mo Thick Plates, Ito, Y., Nakanishi, M., Katsumoto, N. and Tsumura, H.XII-A-38-71, Reduction Intensity Factors Of Silicon And Manganese In Submerged Arc Welding, Zeke, J.XII-A-42-72, Recommendations For Submerged Arc Stainless Steel Strip Cladding, Daemen, R.XII-A-57-72, An Examination Of The Influence Of Process Parameters On Submerged Arc Welding, Drayton, P.A.XII-A-58-72, The Evaluation Of Submerged-Arc Weld-Metal Notch-Toughness In Charpy V And Niblink Tests, Wegrzyn, J.XII-A-59-72, The Evaluation Of Manual And Submerged-Arc Weld-Metal Notch-Toughness In Charpy V And Niblink Tests For C-Mn-Nb Steels, Wegrzyn, J.XII-A-61-73, Final Version Of Table 1 / Doc XII-A-17-70. Chemical Analysis Of Wires And Wire Electrodes For Submerged Arc Welding, Wolff, L.P.XII-A-62-73, Enquete Sur Le Soudage Sous Flux Solide Des Aciers Inoxydables, Anon.XII-A-63-73, Subject: Submerged Arc Welding Of Austenitic Steels, Gronlund, E.XII-A-64-73, Tests On Detachability Of Slag And Sensitivity To Rust Of Submerged-Arc Welds, Anon.XII-A-65-73, Summary Of Submerged Arc Stainless Steel Welding (U.K.), Gifford, A.F.XII-A-6-81, Developments And Applications Of Narrow Gap Welding Processes In Japan, Sejima, I., Godai, T., Kawahara, M. and Nomura, H.XII-A-69-73, Some U.K. Comments On IIW. Doc. XII-512-70. Classification And

Page 215

Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Structural Steels, Gifford, A.F.XII-A-72-73, Some Remarks On The Metallurgy Of Welding Under flux And Electroslag Welding, Palm, J.H.XII-A-73-73, Development Of A New Technique For Square-Butt Submerged-Arc Welding -HIVAS Process-, Tsuboi, J., Akahide, K., Ukibe, T. and Agusa, K.XII-A-74-73, H2 In Submerged Arc Welding, Anon.XII-A-7-81, Present Situation Of Flux-Cored Wires In Japan, Matsumoto, Y. and Yatake, T.XII-A-78-73, Le Procede SW De Soudage A Bon Rendement De Sumitomo, Ito, Y. and Koizumi, I.XII-A-88-74, Specification And Symbolisation Of Bare Steel Wire Electrodes And Fluxes For Submerged Arc Welding Of Mild And Low Alloy Steels, Anon.XII-A-89-74, Proposal: Code Of Symbols - Electrode Wires For Submerged Arc Welding Of Creep-Resistant Steels, Anon.XII-A-90-74, Suggested Sub Arc Flux Performance Classification, Uttrachi, G.D. and Gage, R.M.XII-A-92-74, Proposal: Code Of Symbols - Wire Electrodes For Submerged Arc Welding Of Stainless And Other Similar High Alloy Steels, Anon.XII-A-93-74, Overlaying By Submerged Arc Welding With Edge-Formed Strip Electrode, Morigaki, O., Kumagai, R., Koike, H. and Eguchi, T.XII-A-94-74, Hydrogen In Submerged-Arc Welding, Haddrill, D.M.XII-A-96-74, Possibilities Of Quantitative Classification Of Metallurgical Characteristics Of Welding Fluxes, Zeke, J.XII-A-9-81, Application Of Narrow Gap Submerged Arc Welding Process To Fabrication Of 21/4%Cr - 1% Mo Forged Steel Heat Exchangers, Hirai, Y., Tokuhisa, M., Akahide, K., Ukebe,T., Yamashita, I., Hirose, S., Hirai, K., Suzuki, H. and Katakai, H.XII-A-98-74, Development Of New Overlay Welding Process By Multiple Strip Electrode, Ujiie, A., Yoshimura, T., Matsumoto, O. and Kamei, H.XII-B-102-72, A Study On Wire Feed Rate Of Semi-Automatic Arc Welders, Araya, T. and Udagawa, T.XII-B-104-72, The High Current Pulse-MIG Welding For Narrow-Gap Joints, Nakajima, M., Ueda, M. and Ide, E.XII-B-105-72, A Study Of Narrow-Gap One-Side Arc Welding Process For Horizontal Position Welding, Nakayama, H., Matsumoto, M., Kamata, M. and Inagaki, M.XII-B-106-72, Comments On IIW-DOC. XV-316-71. The Strength Of Fillet Welds Made By Automatic And Semi-Automatic Welding Process, Weeber, P.G.XII-B-109-72, Comments On DOC. XII-B-98-71, Fehervari, A. and Rittinger, J.XII-B-112-72, Plasma-MIG Welding, Essers, W.G., Jelmorini, G. and Tichelaar, G.W.XII-B-116-72, Hydrogen Potential Of MIG Wires, Coe, F.R.XII-B-117-72, Automatic Welding Process Of Vertical Up Fillet Welding, Nakajima, N., Sakai, E., Moriuchi, S., Kawai, H., Arikawa, M., Oishi, M., Rokuzyo, M. and Terao, T.XII-B-11-81, Effects Of Pulsed Current Control On Welding Quality Improvement, Shimada, W. and Ukai, J.XII-B-121-71, The Regulating Of A Forming Joint Process During The Ring Welding, Yerokhin,A.A., Ischenko, Yu.S., Bukarov, V.A. and Guma, V.V.XII-B-122-72, Teneur En Hydrogene Des Fils Pour Soudage Sous Flux Gazeux Teneur En Hydrogene Des Soudures Realisees Avec Ces Fils, Anon.

Page 216

XII-B-123-72, Short Arc, Spray Arc And Pulsed MIG And MAG Welding Applications, Pomaska, H.-U. and Wolff, L.P.XII-B-125-72, Soudage Avec Fil Fourre Sans Atmosphere Gazeuse Exterieure De Protection - Developpment Actuel Du Procede En France, Anon.XII-B-126-72, How Semi-Automatic CO2 Welding Can Assist Pipeliners, Bove, O. and Boekholt, R.XII-B-132-73, The Notch Toughness Of MAG - CO2 - O2 Weld Metal, Konkoly, T.XII-B-133-73, A Study Of Narrow-Gap One-Side Arc Welding Process For On-Site Welding Of T-Joints (Now-T-Proces) In Steel Building, Nakayama, H., Matsumoto, M., Futamura, K., Kamata, M., Nakamura, T. and Inagaki, M.XII-B-134-73, Some Improvements Of Flux Cored Wire For No Gas Arc Welding Process, Morigaki, O., Matsumoto, T., Yoshida, T. and Makita, M.XII-B-135-73, Effect Of Titanium In Steel Electrode Wire For CO2 Arc Welding On The Usability And Mechanical Properties Of Weld Metal, Masumoto, I., Sekiguchi, A. and Kawasaki, S.XII-B-136-73, On Automatic Welding With DELTA Oscillation, Arikawa, M., Ohi, A., Arai, T., Okuda, N., Nanba, M., Sekino, T., Ogasawara, T. and Tanaka, T.XII-B-137-73, Horizontal Narrow Gap MIG Welding, Arikawa, M., Oishi, M., Godai, T. and Nagai, Y.XII-B-138-73, Developments On The Welding Of 9% Ni Steel, Horii, Y., Mizuhashi, N., Fujimoto, R., Nishi, T., Suzuki, T. and Ito, T.XII-B-142-73, Medium Gap Welding Process, Takenaka, K., Mizutame, M. and Arii, M.XII-B-144-73, Precision Construction And Its Welding, Lizuka, S. and Sugawa, E.XII-B-147-73, Transfer Of Electrode Metal Behaviour Of The Weldpool In CO2 Welding, Chernyshov, G.G., Spitsyn, V.V. and Akulov, A.I.XII-B-148-73, The Effects Of Metallurgically Conditioned Inhomogeneities Of Weld Metal On Its Toughness Behaviour At Temperature Below O'C, de Boer, H., Hummitzsch, W., Rose, A. and Zwintzscher, W.XII-B-149-73, Current Practices In Narrow-Gap Welding, Mishler, H.W.XII-B-150-73, Project 2 Of Work Programme 1972/73 Shielding Gases For MIG-Welding Progress Report Febr./Sept. 1973, Anon.XII-B-153-73, Narrow Gap Welding By The Flux-Cored Gas Metal Arc Process, Bradstreet, B.J., Hansen, B.XII-B-158-74, An Application Of Modified Narrow Gap MIG Process On The Field Circumferential Welding Of Penstock, Nakamura, A., Mizuno, K., Nakamura, H. and Kimura, T.XII-B-159-74, The New Automatic Vertical Fillet Welding Processes Based On Self-Shielded Arc Welding And CO2 Arc Welding, Kohira, K., Nakamura, T., Watanabe, N., Saruwatari, S. and Kude, S.XII-B-160-74, Development And Application Of Narrow-Gap One-Side Arc Welding Process (Now Process) To Steel Structures Of Building, Nakayama, H., Matsumoto, M., Futamura, Kamata, M., Nakamura, T. and Inagaki, M.XII-B-161-74, Development Of Automatic Vertical Narrow-Gap Welding Process, Ito, T., Yabuki, Y., Hagiwara, Y., Yamada, A. and Ono, K.XII-B-162-74, Study On The Automatic MIG Welding Process For The Vertical Seam Of Spherical Tanks (OSCON-SB), Haseba, S., Kitaguchi, S., Mizuhashi, N., Takei, S., Hagiwara, T., Nishi, T. and Ito, T.

Page 217

XII-B-163-74, Narrow Gap Welding Process With Horizontal Square Groove Used For BuildingConstruction, Morigaki, O., Takino, T., Kumagai, R., Kanbe, Y., Ishii, T. and Bada, T.XII-B-164-74, Mechanization Of Welding 9% Nickel Steels, Arikawa, M., Ohi, A., Sugiyama, T. and Hashimoto, C.XII-B-165-74, Additional Experiment To Doc XII-B-135-73, XII-B-167-74, Narrow Gap Current Controlled Horizontal Oscillating Welding Process (CHO Process), Nishio, Y., Yagi, T., Satoh, M. and Toyama, S.XII-B-168-74, Development And Application Of Narrow-Gap Arc Welding Processes In Japan, Anon.XII-B-170-74, Survey Of Shielding Gases For MIG Welding, Anon.XII-B-171-74, Experimental Studies To Establish The Oxidation Potential Of MIG Shielding Gases For Steel, Ruckdeschel, W.E.W.XII-B-172-74, Project 4. Of Work Programme Micro-Elements In MIG Weld Metal. Progress Report. Sept. 1973 - April 1974, Konkoly, T.XII-B-174-74, Inclusions In Mild Steel MAG Weld Metal - Their Composition, Size And Number, Ruckdeschel, W.E.W.XII-B-177-75, Contribution To (Experimental Studies To Establish The Oxidation Potential Of MIG Shielding Gases For Steels' - IIW DOC XII-B-171-74, Shackleton, D.N.XII-B-17-81, Study Of The Cooling Characteristics And Weld Hardness In The Locally Drying Underwater Welding Of Mild And 50kgf/mm2 H.T. Steels, Satoh, K., Tamura, M., Kawakami, K., Shinada, K., Ohmae, T. and Manabe, Y.XII-B-178-74, Project 4. Micro Elements In MIG Weld Metal Proposed Research Programme, Anon.XII-B-182-75, Optimizing The Titanium Effect Of Weld Metal Toughness, Nakano, S., Shiga, A. and Tsuboi, J.XII-B-186-75-A, Final Recommendations For The Symbolisation Of Flux-Cored Wires For Welding Structural Steels, Creep Resisting Steels And High Alloyed Steels, AnonXII-B-186-75-B, Tentative Recommendations For The Classification And Symbolisation Of Flux-Cored Wires For Welding Structural Steels, Creep Resisting Steels And High Alloyed Steels, Anon.XII-B-188-75, Application Of Narrow-Gap Automatic CO2 Arc Weaving Welding Process To Heavy Steel Structures Of Building, Nakayama, H., Matsumoto, M., Futamura, K., Nakamura, T., Iezawa, T. and Inagaki, M.XII-B-189-75, Project 4. Micro Elements In MIG Weld Metal. Final Research Proposal, Konkoly, T.XII-B-190-75, Determination Of The Oxidation Potential Of Shielding Gas Mixtures And CO2 With A View To Classifying Gas - Wire Combinations / Final Report, Pomaska, H-U.XII-B-212-77, A New Narrow-Gap Welding Process With Oscillating Arc, Yabuki, Y., Saito, T., Nakamura, H., Imai, K. and Okumura, M.XII-B-214-77, Underwater Welding In A Fluid Stabilized Local Cavity, Nishiguchi, K., Matsunawa, A., Tamura, M. and Wada, H.XII-B-229-77, Observations Of Inclusions In The Deposited Metal By CO2 Welding, Masumoto, I., Yamada, T. and Tsunetomi, E.XII-B-237-78, Development Of Automatic Underwater Welding System, Shinada, K., Shouno, S., Nishio, Y. and Wada, H.XII-B-239-78, Physical And Metallurgical Analysis Of Weld Metals Of The Project XII-B, Hrivnak, I. and Magula, V.

Page 218

XII-B-241-78, Summary Of Progress In The Development Of Underwater Welding Systems, Wilks, P.F. and Beveridge, H.J.R.XII-B-244-78, Development And Application Of Narrow Groove MIG Welding, Sawada, S., Matsumiya, J., Kawahara, M., Takao, M., Hori, K. and Asano, I.XII-B-247-78, Guideline For MIG/MAG Application - Guide For User-, Pomaska, H-U.XII-B-249-78, Present Situation Of Flux Cored Wires In Japan (Production, Applications And Future), Tsunetomi, E.XII-B-255-79, Application Of Arc-Oscillating Narrow-Gap Welding Process To The Welding Of Heavy Structures With Varying Gap Width, Imai, K., Yatake, T., Hagiwara, T., Tachikawa, H., Tsumetomi, E-i., Kataoka, R. and Ishikawa, Y.XII-B-258-79, Twist Arc Welding Process (New Narrow-Gap Welding Process In Flat Position),Kimura, S., Godai, T., Ichihara, I., Nagai, Y. and Kashimura, T.XII-B-259-79, Switched Arc MIG-Welding, Brown, K.W.XII-B-260-79, New Trends In Narrow Gap Welding, Ducrot, A. and Sayegh, G.XII-B-264-79, Contribution To Gas Shielded Electric Welding Of Alloyed Steels, Barborka, J.XII-B-265-79, Microalloying Elements In MIG Weld Metal Final Report Of Part 1: Titanium Alloyed Sold Wires. Co-operative Research Program, Konkoly, T.XII-B-266-79, Status Flux Cored Wire Welding In The Netherlands, Boekholt, R.XII-B-268-79, The Study Of Alloy Position Pulsed TIG-Welding Of Smaller Thick-Walled Tubes- Its Technology And Equipment, Fuxiang, Q., Chuandong, H. et al.XII-B-271-80, Results Of Investigations On The Formation Of Spatter During Metal Active Gas Arc Welding In The G.D.R., Scheibner, P.XII-B-273-79, Present Situation Of Flux Cored Wires In Italy With Reference To DOC XII-B-232-77, Anon.XII-B-274-79, State Of Flux-Cored Wire Production In The USSR, Pokhodnya, I.K. and Shlepakov, V.N.XII-B-279-80, Heat Flow And Welding Conditions In Pulsed G.T.A Welding, Minehisa, S., Kureishi, M. and Ohtsuka, T.XII-B-280-80, Underwater MIG Welding Using Wire Brush Nozzle -High Pressure Chamber Experiment-, Arata, Y., Hamasaki, M. and Sakakibara, J.XII-B-2-81, Prediction Of Pulsed GTA Welding Condition For Thin Plates, Kureishi, M.XII-B-281-80, Some Characteristics Of The Electrode Melting Phenomena In Narrow Gap MIG-Arc Welding, Matumoto, J., Obata, R., Teramoto, T. and One, H.XII-B-282-80, Narrow Gap TIG Arc Welding Of Super High Tensile Strength Steel For Spherical Pressure Hulls, Shimoyama, T., Takano, G., Endoh, M., Hirose, M., Namura, M., Toyohara, T. and Morihana, H.XII-B-283-80, Application Of NARROW-GAP GMA Welding Process To Nuclear Reactor Pressure Vessel, Sawada, S., Ohta, M., Nishioka, A., Hori, K., Kawahara, M. and Yamasaki, H.XII-B-284-80, Evolution De La Technique De Soudage Narrow-Gap. Resultats Et Conditions D'emplois, Cazes, R., Koffel, M. and Sayegh, G.XII-B-285-80, Development Of Automatic Welding System For Membranes Using In LNG Inground Storage Tank, Kumabe, H., Maesawa, Y., Shimoyama, T. and Sakamoto, N.XII-B-286-80, High Pressure Inert Gas Shielded Arcs (1-19 Bars), Allum, C.J., Pinfold, B.E. and Nixon, J.HXII-B-287-80, Stabilization Of Pure-Argon-Shielded Metal-Arc By Rare Earth Additions To Electrode Wires, Agusa, K., Nishiyama, N. and Tsuboi, J.

Page 219

XII-B-289-80, Development And Practical Use Of Locally Drying Underwater Welding, Shinada, K., Ohmae, T., Wada, H., Manabe, Y., Tamura, M. and Nagata, Y.XII-B-290-80, Study On Narrow Groove TIG Process For High Strength Steels, Susei, S., Kutsuna, M., Nakayama, S. and Takeda, T.XII-B-291-80, Synergic Pulse MIG Welding, Needham, J.C.XII-B-292-80, Exploration Of Transistor Power Sources In Arc Welding, Lucas, W.XII-B-3-81, Shape Of Penetration Bead And Welding Conditions In GTA Process, Kureishi, M.XII-B-41-83, Development Of A Wind-Resistant Nozzle For Gas-Shielded Arc Welding, Kuroki,M., Sato, M., Wada, H. and Manabe, Y.XII-B-44-83, Development Of Retarded Cooling Method For Locally Drying Underwater Welding, Tamura, M., Manabe, Y., Ohmae, T., Wada, H. and Satoh, K.XII-B-4-81, Some Characteristics Of The Electrode Melting Phenomena In Narrow Gap MIG-Arc Welding (Rept.-II) -Effect Of Shielding Gas Composition-, Ono, H., Teramoto, T., Obata, R. and Matumoto, J.XII-B-49-83, Gas-Shielded Metal-Arc Welding Of Steel Directions For Execution Of Process Avoidance Of Lack Of Fusion, Anon.XII-B-50-83, Gas-Shielded Metal-Arc Welding Of Steel Directions For Execution Of Process Avoidance Of Pores, Anon.XII-B-6-81, Welding Of Al-Mg Alloy 5083-0 For The Construction Of LNG Storage Tanks, Kuriyama, Y., Minoda, K., Irisawa, T. and Nagaoka, H.XII-B-68-70, Use Of Non-Gas Flux-Cored Wire Semi-Automatic Arc Welding To Steel Structures Of Building, Nakayama, H., Matsumoto, M. and Inagaki, M.XII-B-71-70, CO2-O2 Arc Welding Process With Insertion Of Coated Rods, Sekiguchi, H.XII-B-75-70, Recommendations For The Standardisation Of Solid Steel Electrodes For Gas Shielded Bare Wire Arc Welding Of Structural Steel In The Tensile Range 35-52 kg/mm2 (Minimum Values), Anon.XII-B-7-81, Development Of Narrow Gap GMA Welding Process With Waved Wire, Sato, S., Shimoyama, T., Shono, S., Kamei, H., Nagura, Y., Hamada, T. and Sunada, Y.XII-B-87-71, Use Of Narrow-Gap One-Side Arc Welding Process (Now Process) To Steel Structures Of Building, Nakayama, H., Matsumoto, M., Kamata, M. and Inagaki, M.XII-B-8-81, A State Of The Art Report Of Minor Element Effects On The Gas-Shielded Arc Welding Phenomena In Japan, Agusa, K. and Yamauchi, N.XII-B-88-71, Self-Shielded Continuous Electrode Arc Welding For Constructional Steelwork, Matsumoto, I.XII-B-89-71, Development Of Fully Automatic CO2 Welding Equipments Applying Numerical Control, Koike, Y., Araki, Y., Daigo, T., Sano, H., Kobayashi, I. and Kominami, M.XII-B-9-81, Present Situation Of Flux-Cored Wires In Japan, Matsumoto, Y. and Yatake, T.XII-C-103-79, A Study Of Gas Shielding Characteristics Of MIG Welding Nozzles By SchlierenMethod, Go, T. and Sakabata, N.XII-C-104-79, Shielding Gas Flow Characteristics Of High Current MIG Welding With Double Shielding Nozzle, Okada, T., Wakino, Y. and Yamamoto, H.XII-C-108-79, Answers Of National Delegates To The Questionnaire Concerning The Sub Commission XII - C Activities, Anon.XII-C-109-79, Shielding Gas Flow Characteristics Of MIG Welding Nozzles, Go, T., Sakabata, N., Wakino, Y. and Yamamoto, H.XII-C-110-79, Answer To Survey Of Shielding Gases For Welding Of Non-Ferrous Metals (XII-B-250-78), Masumoto, I., Tsunetomi, E., Sugiyama, Y. and Susei, S.

Page 220

XII-C-113-79, Comments On Welding Of Aluminium And Its Alloys, Kobayashi, T., Sugiyama, Y., Kuriyama, Y. and Susei, S.XII-C-114-79, Sectional List Of British Standards. March 1978, Anon.XII-C-15-70, Effects Of Nitrogen, Oxygen, Hydrogen Gases Added To Argon Gas On MIG Welding Of Aluminum Alloys, Fukui, T., Sugiyama, Y. and Terai, S.XII-C-16-70, The Influence Of Storage Of Electrode Wire On The Quality Of MIG-Welding Joint Off Aluminum Alloy, Uchida, A., Fujimura, T., Matsuyama, I., Yamamoto, S., Sugiyama, Y., Oasa, H., Yoshida, S. and Matsumoto, J.XII-C-18-70, The Gas Metal-Arc Welding Of Copper, Kobayashi, T., Kuwana, T., Ando, M. andFujita, I.XII-C-19-70, Procede M.I.G. A Courant Impulsionnel, Prischi, G. and Demars, P.XII-C-20-75, Welding Copper And Its Alloys In Japan, Anon.XII-C-22-82, Use Of ZIS 995 Building-Block System As A Basis For The Construction Of Welding Robots, Herden, G.XII-C-26-71, Choix Du Gaz Protecteur Pour Le Soudage De L'Aluminium Et De Ses Alliages, Anon.XII-C-31-71, Choice Of Shielding Gas For Welding Of Copper And Its Alloys, Anon.XII-C-39-72, A Critical Review Of Copper And Copper Alloy Welding Practice, Dawson, R.J.XII-C-56-83, Development Of Automatic Boiler Tube Welding System, Hirata, H., Moriyama, M. and Fujimura, H.XII-C-57-83, Automatic Welding Technique For Saddle Type Connection On Heavy Wall Thickness Large Diameter Branch Joints, Asano, I., Kawahara, M., Takao, M. and Nomura, T.XII-C-58-74, Comments On Doc. XII-C-50, 53 and 54, Weeber, P.G.XII-C-58-83, Underwater Dry TIG Welding Using Wire Brush Nozzle, Hamasaki, M. and Sakakibara, J.XII-C-59-74, Comments On Welding Equipement Factors Affecting Welding Performance - Project 1a, Rogerson.XII-C-60-74, Comments On The Importance Of Welding Characteristics On Certain Aspects Of Welding Aluminium, Hirschfield.XII-C-61-74, Nitrogen Porosity In Gas Shielded Arc Welding Of Copper, Littleton, J., Lammas, J. and Jordan, M.F.XII-C-65-74, One Side Welding Of 5083 Aluminium Alloy By MIG Welding Process, Ujiie, A., Sato, S., Shimoyama, T., Kobayashi, J. and Hayashi, H.XII-C-66-74, Influence Of Surface Contamination Of Al 99,5 and AlMg 5 Wires On Welding Parameters, Joint Strength And Porosity, Buray, Z. and Huber, I.XII-C-66-75, On The Stabilization For MIG Welding Of Aluminum, Kiyohara, M., Okada, T., Wakino, Y. and Yamamoto, H.XII-C-67-75, NHA Process, Narrow-Gap Horizontal Welding Process For Aluminum And Its Alloys, Arikawa, M., Oishi, M., Okuda, N., Tomita, M., Kashimura, T. and Koga, S.XII-C-68-75, Delta Oscillation Welding Process For Vertical Welding Of Aluminum And Its Alloys Thick Plate, Arikawa, M., Oishi, M., Okuda, N., Tomita, M., Kogane, K. and Yonezawa, K.XII-C-68-83, Requirements On Control Systems Of Arc Welding Robots, Barborka, J., Rajsky, S. and Majek, V.XII-C-69-75, DD Process, Highly Efficient Welding Process For Aluminium And Its Alloys, Arikawa, M., Oishi, M., Okuda, N., Tomita, M., Rokujo, M., Endo, T., Yokota, H. and Ueda, M.XII-C-71-75, Welding Copper And Its Alloy In Japan, Anon.

Page 221

XII-C-77-75, Electrogas Vertical Welding Of Aluminum. A New Application Based On Recent Developments, Normando, N.J., Wilcox, D.V. and Ashton, R.F.XII-C-78-75, Soudage Vertical Sous Laitier De L'Aluminium, Boizeau Y., Le Penven, Y. and De Bony, Y.XII-C-81-75, Development Of An Electroslag Technique For Welding Thick Aluminium, Bartle, P.M.XII-C-82-75, Present Situation Of Welding Of Aluminum And Its Alloys In Japan, Anon.XII-C-85-84, The Development Of Weld Line Tracking Sensor, Sakai, E., Fujimura, H. and Ide,E.XII-C-90-84, Welding Variables And their Importance For Robotic Arc Welding, Smith, A.A.XII-C-91-84, Off-Line Programming In CAD/CAM Interfacing In Robotic Arc Welding, Prinz, F.B. and Gursoz, E.L.XII-C-92-84, Functions And Applications Of Hitachi Process Robot, Sejima, I. et al.XII-C-93-84, The Introduction Of Robots Into Arc Welding In Japan, Masumoto, I. and Okada, T.XII-C-9-81, Transistor-Controlled Pulse MIG Welding Of Aluminium Alloys, Araya, T., Endo, Y., Imamiya, H., Ando, B. and Sejima, I.XII-D-175-94, Tubular Cored Wires For Gas Shielded And Self-Shielded Metal Arc Welding OfStainless Steel, Anon.XII-D-197-97, Index Of Generic Designation Numbers For Welding Filler Metal Specifications, Thomas, D.XII-D-61-87, Filler Metal Designation Module, Thomas, D.XII-D-65-87, Integration Of AWS And European Welding Consumable Standards, Shackleton, D.XII-E-15-78, Research On The Transverse Cracks In Heavy Section Weldments Of 21/4Cr - 1Mo Steel, Takahashi, E. and Iwai, K.XII-E-17-81, Microalloying With Ti And B By Reduction From Flux In Submerged Arc Welding, Nagano, K., Takami, T. and Koyama, K.XII-E-18-78, Behavior Of Diffusible Hydrogen In Submerged Arc Welding. Survey Of Documents And Publications, Folkhard, E.XII-E-25-81, Peculiarities Of Component Interaction In Alloys For Wear Resistant Surfacing, Dudko, D.A., Maksimovich, B.I., Zelenin, V.I., Netesa, I.V., Panasyuk, A.D. and Prihno, I.G.XII-E-32-82, The Effect Of Shielding Gas Composition On The Characteristics Of Carbon Steel Weld Metal, Kobayashi, T. and Sakai, Y.XII-E-33-82, The Effect Of Shielding Gas Composition On The Characteristics Of Stainless Steel Weld Metal, Kobayashi, T. and Sugiyama, T.XII-E-42-83, Application Of Narrow-Gap GTA Welding Process To The Welding Of Large TypeStainless Steel Nuclear Pressure Vessels, Uratani, Y., Oka, K., Matsumoto, O., Nagura, Y. and Kawaguchi, S.XII-E-510-70, The Influence Of The Welding Conditions On The Notch Toughness Of MIG-CO2 Weld Metal, Konkoly, T.XII-E-555-72, Commission Of Terminology - IIW, Anon.XII-E-64-80, Study Of Blow Hole Formation In Weld Metal -Effect Of Welding Speed On Blow Hole Formation-, Masumoto, I. and Takano, J.XII-F-102-70, Arc Characteristics - Submerged-Arc Welding, Anon.XII-F-103-70, Standard Load Voltages For Submerged Arc Welding, Anon.XII-F-121-71, Definition Of Pulsed Current Waveforms, Anon.

Page 222

XII-F-124-71, Classification Of Metal Transfer - For Flux And Gas Shielded Electric Welding Processes, Anon.XII-F-125-71, Considerations Of The Behavior Of Equipement Used In MIG Welding, Anon.XII-F-128-71-E, Review Of Information From Doc. XII-F-111, 112, 113, 114-71 And Doc. XII-C-19-70, Prischi, G.XII-F-130-72, The Dynamic Characteristics Of Arc Column And The Restriking Phenomena In High Frequency Arcs, Nishiguchi, K. and Ohji, T.XII-F-132-72, Paper To Be Presented At The Annual Assembly Of The IIW, Ortega, A.XII-F-136-72, Definitions Of Terms In Short Circuit Arc Welding, Anon.XII-F-137-72, Classification Of Metal Transfer - For Flux And Gas Shielded Electric Welding Processes, Anon.XII-F-142-73, Negative Pulse CO2 Shielded Arc Welding, Stular, P.XII-F-145-73, Minutes Of The Intermediate Meeting Held On Thursday, 22nd February, 1973 In Paris, Needham, J.C.XII-F-146-73, Classification Of Metal Transfer In Electric Arc Welding Process, Anon.XII-F-148-73, Symbols For Electric Arc Welding Equipment, Needham, J.C.XII-F-176-76, Development Of Self-Shielded Semiautomatic Arc Welder, Araya, T. and Endo, Y.XII-F-177-76, MIG Pulse Welding With Nickel Alloy Wires, Heath, D.J. and Thornley, J.C.XII-F-189-78, Investigation On Dynamic Characteristics In low frequency Pulsed MIG Welding,Nomura, H. and Sugitani, Y.XII-F-191-78, Development Of High Speed Arc Welding By Using Self-Shielded Type Flux-Cored Wire, Araya, T. and Endo, Y.XII-F-203-79, Arc-Phenomena And Bead Formation In Twin Electrode TIG Welding, Kozono, Y., Kokura, S., Nihei, M. and Sejima, I.XII-F-217-80, Review Of New Designs Of Power Sources For Arc Welding Processes, Anon.XII-F-223-80, Power Sources Used In Manual Metal Arc Welding Information To Commission II, Prischi, G.XIII-1004-81, Bases For Design Of Tube To Tube Joints With Circular Hollow Sections, Kurobane, Y.XIII-1006-81, Etude Comparative Des Regles De Calcul A La Fatigue Des Structures Soudees, Anon.XIII-1007-81, Fatigue Life Prediction Of Tubular Nodes, Lieurade, H.-P., Gerald, J.P. and Putot, C.J.XIII-1008-81, Comportement En Fatigue Oligocyclique De Joints Soudes En Aciers A Haute Limite D'Elasticite, Lieurade, H.P. and Maillard-Salin, C.XIII-1009-81, Travaux En Cours En France Sur La Fatigue Des Joints Soudes - Juin 1981, Anon.XIII-1010-81, Articulation De Balancier De Pelle Hydraulique, Anon.XIII-1011-81, Oreille De Fleche De Pelle Hydraulique, Anon.XIII-1012-81, Bicyclette Pliante D'Enfant, Anon.XIII-1014-81, Fatigue Crack Propagation In The Vicinity Of Weld-Deposits In High-Strength, Structural Steel, Braid, J.E.M. and Knott, J.F.XIII-1015-81, Fatigue Strength Of Multi-Spot Welded Joints - Hypothesis On Fatigue Strength Of Multi-Spot Welded Joints And Its Experimental Verification, Satoh, T., Katayama, J. and Morii, Y.XIII-1016-81, Work In Progress On Fatigue Strength Of Welded Structures In The UK - 1981,

Page 223

Hellen, R.A.J. and Connors, D.C.XIII-1017-81, Contribution A L'Etude De Parachevement Des Soudures Pour L'Amelioration De Leur Resistance A La Fatigue, Bramat, M.XIII-1019-81, Influence Of Loading Conditions Of Low-Cycle Fatigue Strength Of Butt Welded Joints Of Structural Steels, Larionov, V.V. and Polezhaev, B.P.XIII-1021-81, Low Cycle Fatigue Behavior Of Tee Type Fillet Welded Joint Subjected To Out-Of-Plane Bending, Kurihara, M. and Kawahara, M.XIII-1022-81, Bendability And Fatigue Strength Of Shell-To-Annular Fillet Welded Joint In Large Oil Storage Tank, Uchida, M., Naitoh, K. and Yoshida, K.XIII-1029-81, Comparative Report On Statistical Analyses Of Three Sets Of Fatigue Data, Anon.XIII-1030-81, Peculiarities Of Elastic-Plastic Deformation Of Low-Carbon Steel Welded Joints, Shagdyr, T.Sh. and Yakubovsky, V.V.XIII-1031-81, Alternation Of Residual Stresses In Welded Joints At Cyclic Loading, Trufiakov, V.I., Guscha, O.I. and Kudriavzev, Yu.F.XIII-1032-81, Cracking In Ferritic Feedwater Piping Systems Of Boiling Water Reactors, Kussmaul, K., Blind, D. and Jansky, J.XIII-1033-81, Electron Micrographical Investigations Of A Corrosion Fatigue Fracture Surface Developed Under Pressure Water Reactor Conditions, Blind, D., Sturm, D. and Trunk, H.XIII-1034-81, Steel In Marine Structures, Anon.XIII-1035-81, Strength Of Tubular Joints, de Back, J.XIII-1036-82, Data Sheets On Fatigue Properties For Butt Welded Joints Of SM50B Rolled Steel For Welded Structure -Effect Of Welding Procedure-, Anon.XIII-1037-82, Work In Progress On Fatigue Strength Of Welded Joints In Japan - March 1982,Iida, K.XIII-1038-82, Fatigue Behavior Of Pipes Containing Multiple Flaws In Inner Surface, Shibata, K., Yokoyama, N., Ohba, T., Kawamura, T. and Miyazono, S.XIII-1040-82, The Tendency Of Welded Box Girders To Spontaneous Failures By Low Temperature Fatigue, Kobrin, M.XIII-1041-82, Experience-Based, Fitness-For-Purpose Ultrasonic Reject Criteria For Tubular Structures, Marshall, P.W.XIII-1042-82, Fatigue Behaviour Of Steel Rectangular Hollow Sections Used In Bus Structures, Branco, C. and Fernandes, A.A.XIII-1043-82, Crack Growth In Welds With Soft Interlayers, Wegrzyn, J. and Dziubinski, J.XIII-1044-82, An Evaluation Procedure For Multiple Surface Cracks During Axial And Bending Fatigue Loadings, Iida, K. and Hirata, T.XIII-1045-82, Fatigue Tests Of Truss Made Of 600 MPa And 800 MPa Class Steels, Tajima, J., Shimokawa, H., Takena, K., Miki, C. and Ito, F.XIII-1046-82, Work In Progress On Fatigue Strength Of Welded Structures In The Federal Republic Of Germany -June 1982-, Olivier, R.XIII-1047-82, Improvement Of Fatigue Life Of Welded Beams By TIG-Dressing, Minner, H.H. and Seeger, T.XIII-1048-82, Fatigue Strength Of Butt Welds Made By Different Welding Processes, Petershagen, H. and Zwick, W.XIII-1051-82, Prevision Par Un Modele Simplifie De La Duree De Vie D'Un Assemblage En Coix Soude, Recho, N. and Brozzetti, J.XIII-1053-82, Modifications Microstructurales Resultant Du Soudage Par Faisceau D'Electrons

Page 224

D'Un Alliage D'Aluminium 7075 Consequences Sur La Tenue En Fatigue - Corrosion, Mas, Ch., Coquerelle, G. and Bousseau, M.XIII-1054-82, Comportement En Fatigue D'Aciers A Haute Limite D'Elasticite, Gauchet, A. andRabbe, P.XIII-1055-82, Fissuration Par Fatigue D'Assemblages Soudes En Acier H L E, Lieurade, H.-P.,Maillard-Salin, C. and Truchon, M.XIII-1056-82, A Study Of Fatigue Crack Propagation In E 36 Steel Welded Joints, Truchon, M., Lieurade, H.P. and Putot, C.XIII-1057-82, Effects Of Fillet Shape Parameters On Bending Fatigue Strength Of Transverse Fillet Welded Joints, Iida, K.XIII-1058-82, Travaux En Cours En France Sur La Fatigue Des Joints Soudes, Anon.XIII-1059-82, Cassures Sur Des Traverses De Vapeur De Petroliers, de Leiris, H. and Waeckerle, R.XIII-1063-82, Work In Progress On Fatigue Strength Of Welded Structures In The UK. Ljubljana - 1982, Thorpe, T.W., Scott, P.M. and Rance, A.XIII-1064-82, The Strength Of Welded Joints Of Various Classes Of Steels At The Load-Controlled Low Cycle Testing, Trufiakov, V.I. and Yakubovsky, V.V.XIII-1066-82, Metallurgical And Fracture Analyses Of The Alexander L Kielland Platform, Almar-Naess, A., Haagensen, P.J., Lian, B. and Simonsen, T.XIII-1067-82, Work In Progress On Fatigue Strength Of Welded Structures In Norway, Haagensen, P.J.XIII-1074-82, Application Of Fracture Mechanics To The Fatigue Of Welded Structures, Lieurade, H.-P.XIII-1075-82, Addendum To The Comparative Report On Statistical Analyses Of Three Sets Of Fatigue Data (IIW Document XIII-1029-81), Anon.XIII-1076-83, Fatigue Crack Propagation Rates And Threshold Stress Intensity Factors For Welded Joints Of HT80 Steel At Several Stress Ratios, Ohta, A., Sasaki, E., Nihei, M., Kanao,M. and Inagaki, M.XIII-1077-83, Data Sheets On Fatigue Crack Propagation Properties For Butt Welded Joints Of High Strength Steel (Class 800N/mm2) For Welded Structure -Effect Of Welding Procedure-, Anon.XIII-1078-83, Fatigue Crack Propagation Behavior In The Hardness Heterogeneous Field, Mukai, Y. and Nishimura, A.XIII-1079-83, Fatigue Crack Propagation Behavior And Analytical Estimation On The Election Beam Weld Bead, Mukai, Y. and Nishimura, A.XIII-1080-83, Duree De Vie De L'Assemblage En Croix Soude Comparaison De Deux Approches, Recho, N.XIII-1081-83, Some Stress Intensity Factors For Hull Members In Relation To Fatigue Crack Propagation, Matoba, M. and Inoue, K.XIII-1082-83, Evaluation Of Fatigue Strength Of Welded Steel Structures_Hull's Members, Hollow Section Joints, Piping And Vessel Joints_, Matoba, M., Kawasaki, T., Fujii, T. and Yamauchi, T.XIII-1084-83, Calculation Of Fatigue Life Of Steels And Welded Joints Under Bicyclic Loading,Trufiakov, V.I. and Kovalchuk, V.S.XIII-1085-83, Effects Of Post Weld Improvement Techniques On Fatigue Resistance Of Welded Joints In Offshore Steels, Bignonnet, A.XIII-1086-83, Work In Progress On Fatigue Strength Of Welded Joints In Japan - February

Page 225

1983, Iida, K.XIII-1087-83, Fatigue Strength Of Brace Connections In Semi-Submersible Rig, Yamashita, M., Fujii, T., Nawata, T., Matoba, M., Kawasaki, T., Fujishima, K., Ujihara, T. and Tamehiro, M.XIII-1088-83, Fatigue Strength Of Welded Joints In Aluminium Alloys: A Basis For Italian Design Rules, Atzori, B. and Dattoma, V.XIII-1089-83, A Comparison Of Fatigue Behaviour Of Welded Joints In Steel And In Aluminium Alloys, Atzori, B. and Dattoma, V.XIII-1091-83, Evaluation Of Bending Fatigue Life For Fillet Welded Joints And Application To Fatigue Analysis Of Tubular Joints, Mitsui, Y. and Kurobane, Y.XIII-1092-83, Acceptable Porosity Level For A5083-O Aluminium Butt Welded Joints In Reference To JIS Code, Yajima, H., Ando, K., Hirata, T., Izumi, T. and Iida, K.XIII-1093-83, Fatigue Cracking Of Splitter Plates In Pipe Elbow, Iida, K., Endo, T., Sakamoto, N., Watanabe, K., Yamauchi, T. and Koyama, K.XIII-1094-83, Fatigue Crack Growth In Welded Joints, Ulrych, K.XIII-1095-83, The Effect Of Residual Stresses And R-Value On The Service Life Of Welded Connections Subject To Fatigue, Overbeeke, J.L. and de back, J.XIII-1097-83, Fatigue Resistance Of Welded Joints In Offshore Steels, Bignonnet, A.XIII-1098-83, Fatigue Crack Growth Rate In Offshore Steels, Bignonnet, A.XIII-1099-83, Travaux En Cours En France Sur La Fatigue Des Joints Soudes. Mai 1983, Anon.XIII-1103-83, Application Of Hot Spot Strain Concept To Fatigue Life Prediction, Iida, K.XIII-1104-83, Work In Progress On Fatigue Strength Of Welded Structures In The UK. Trondheim - 1983, Anon.XIII-1111-83, Contribution A L'Etude De L'Influence D'Operations De Parachevement Sur La Tenue En Fatigue De Joints Soudes, Bousseau, M.XIII-1112-83, Localisation De L'Amorcage Des fissures Dans Les Joints Soudes, Recho, N.XIII-1113-83, Formation And Growth Of Cracking In Feed Water Pipes And RPV Nozzles, Kubmaul, K., Blind, D., Jansky, J. and Rintamaa, R.XIII-1114-83, Fatigue Experiments At 550(C In The Low-Cycle Region On Specimens Taken From Welded Joints Of The 12% Chromium Steel X 20 CrMoV 12 1., Blind, D.XIII-1115-83, Work In Progress On Fracture Strength Of Welded Structures In Australia 1983, Corderoy, D.XIII-1116-83, Effect Of Plate Thickness In Fatigue Of Cruciform Welded Joints, Berge, S.XIII-1117-84, Work In Progress On Fatigue Strength Of Welded Structures In The Federal Republic Of Germany - 1984, Petershagen, H.XIII-1118-84, Fractographic Indications Of Fatigue Crack Propagation In The Case Of A Ferritic/Pearlitic Cast Material With Repair Welds, Blind, D. and Waidele, H.XIII-1119-84, Frequency Effect On Low-Cycle Fatigue Of Type 304 L Stainless Steel Weldments At Elevated Temperatures, Rie, K.-T. and Schmidt, R-M.XIII-1120-84, The Influence Of Undercut On The Fatigue Strength Of Welds - A Literature Survey, Petershagen, H.XIII-1121-84, Work In Progress On Fatigue Strength Of Welded Joints In Japan - March 1984,Iida, K.XIII-1123-84, Corrosion Fatigue Strength Of Cruciform Welded Joints In Synthetic Seawater, Narumoto, A.XIII-1124-84, Data Sheets On Fatigue Properties For Butt Welded Joints Of SB42 Carbon Steel Plate For Boilers And Other Pressure Vessels -Effect Of Stress Ratio-, Anon.

Page 226

XIII-1125-84, Very Low Cycle Fatigue Strength Of Ship Structure Steel, Iida, K. and Kakimi, T.XIII-1126-84, Shapes And Coalescence Of Surface Figure Cracks, Iida, K.XIII-1127-84, Fatigue Problems In Welded Joints, Radhakrishnan, V.M.XIII-1128-84, A Comparison Of Various Welded Aluminium Alloy Joint Specimens In Tensile Fatigue At Short Lives, Webber, D. and McDiarmid, D.L.XIII-1129-84, The Effect Of Transverse Fillet Welds On The Fatigue Life Of DGFVE 232A(7019) Al Zn Mg Alloy, Webber, D.XIII-1130-84, Role Du Grenaillage De Precontrainte Sur La Tenue En Fatigue Et En Fatigue Corrosion De L'Alliage 7075 Soude Par Faisceau D'Electrons, Mas, Ch., Brault, G. and Bousseau, M.XIII-1131-84, Effect Des Traitements Des Parachevement Sur Le Comportement En Fatigue Des Joints Soudes Bout A Bout En Acier HLES, Lieurade, H.P. and Tourrade, J.C.XIII-1135-84, In-Depth Fatigue Crack Growth Monitoring Using A Crack Front Marking Technique, Husset, J., Lieurade, H.-P., Maltrud, F. and Truchon, M.XIII-1136-84, Suivi De L'Amorcage Et De La Fissuration En Fatigue De Joints Soudes Monopoints, Maillard-Salin, C., Pinard, J. and Truchon, M.XIII-1137-84, Travaux En Cours En France Sur La Fatigue Des Joints Soudes. Mai 1984, Anon.XIII-1138-84, A Procedure Of Fatigue Analysis Of Aluminium Structure Welded Joints, Dvoretskii, V.I., Mikheev, P.P. and Shonin, V.A.XIII-1139-84, The Estimation Of The Fatigue Crack Propagation Rate Under Bicyclic Loading, Trufiakov, V.I. and Kovalchuk, V.S.XIII-1140-84, High-Strength Welded Joint Resistance To Deforming And Fracture At Short Fatigue Lives, Trufiakov, V.I. and Yakubovsky, V.V.XIII-1141-84, Fatigue Tests On Fillet Welded Joints To Assess The Validity Of Miner's Cumulative Damage Rule, Gurney, T.R.XIII-1142-84, The Fatigue Strength Of Transverse Butt Welded Joints Made By The Electron Beam Welding Process In C-Mn Steel, Wylde, J.G. and Elliott, S.XIII-1143-84, Fatigue Of Stress-Relieved Fillet Welds Under Part-Compressive Loading, Maddox, S.J.XIII-1144-84, A Study Of The Effects Of Stress-Relief And Seawater Temperature On The Corrosion Fatigue Of Welded Steel Joints, Booth, G.S.XIII-1151-84, Fatigue Of Welded Components And Structures. Annual Report 1983-1984, Anon.XIII-1152-84, Fatigue Cracking Of Splitter Plates In Pipe Elbow, Iida, K. and Sakamoto, N.XIII-1154-84, Fatigue Characterization Of Fabricated Ship Details For Design, Lusk, C.T., Gross, J., Palermo, P.M., Gregory, J.B., Hannan, W.N., Allen, T.W. and Anderson, D.B.XIII-1155-85, Work In Progress On Fatigue Strength Of Welded Joints In Japan - May 1985, Iida, K.XIII-1156-85, A Study On Fatigue Crack Growth Behaviour In The Near-Threshold Regime In Weldments, Guha, B., Balasubramanian, S. and Padmanabhan, K.A.XIII-1157-85, Notch Stress Proof For Fatigue Resistant Welded Structures, Radaj, D.XIII-1158-85, Recommended Fatigue Design Procedure For Hollow Section Joints, Anon.XIII-1160-85, Influence Des Traitements De Parachevement Des Soudures Et De Surchage Sur La Tenue En Fatigue Des Assemblages Soudes, Flavenot, J.F., Andrrzejewski, A. and Bramat, M.XIII-1161-85, Etude De La Resistance A La Fatigue D'Assemblages Soudes Par Points,

Page 227

Recho, N. and Bramat, M.XIII-1162-85, Grille De Prise D'eau, Anon.XIII-1164-85, Predictive Method Of Low Cycle Fatigue Life Of Carbon And Low Alloy Steels In High Temperature Water Environments, Iida, K., Kobayashi, H. and Higuchi, M.XIII-1165-85, Consequences De Maintiens Isothermes Sur La Tenue En Fatigue D'Assemblages Soudes Grenailles, Bousseau, M., Brault, G. and Mas, Ch.XIII-1166-85, Experimental Study Of Fatigue Crack Propagation In Welded Tubular Connections, Bignonnet, A., Lieurade, H.P., Sixou, Y. and Lebrun, J.L.XIII-1167-85, Fatigue Behavior Of Various Steels Welded With A Stainless Steel Filler Metal, Maillard-Salin, C., Gerey, J.P., Poyet, P., Lieurade, H.-P. and Rabbe, P.XIII-1168-85, Cyclic Fatigue Of Offshore Units Joints, Anon.XIII-1169-85, Cyclic Fatigue Of Steel Ship Welded Joints, Anon.XIII-1170-85, Etude De L'Amorcage Et De La Propagation Des Fissures Dans Des Joints Soudes Heterogenes, Gauthier, J.P. and Petrequin, P.XIII-1171-85, Travaux En Cours En France Sur La Fatigue Des Joints Soudes. Juillet 1985, Anon.XIII-1172-85, Meeting Report Of Working Group N(1 Dealing With The Application Of MethodsOf Statistical Analysis. Meeting Of the April 18th 1985, Munich, Boll, O., Bramat, M., Lieurade,H.P., Maddox, S.J. and Truchon, M.XIII-1173-85, Minutes Of Meeting Of WG4 On The Influence Of Weld Defects On Fatigue Loaded Structures, Petershagen, H., Maddox, S.J., Boll, O., Sperle, J.O., Lieurade, H.P. and Truchon, M.XIII-1174-85, An Analysis Of Low Cycle Fatigue Behavior Of Butt Welded Joints In Elevated Temperature, Iida, K., Wada, Y., Endo, T. and Sakon, T.XIII-1175-85, Work In Progress On Fatigue Strength Of Welded Structures In Norway, Haagensen, P.J.XIII-1176-85, Influence Des Defauts Internes Et Des Preparations Sur La Tenue En Fatigue De Joints Soudes En Alliage D'Aluminium, Tourrade, J.-C.XIII-1177-85, Stress Intensity Factors For Toe Defects In Single-Sided Transverse Attachments Of Varying Thickness Made With Fully Penetrating Welds, Smith, I.J.XIII-1178-85, A 3-D Analysis Of The Longitudinal Non-Load-Carrying Fillet Welded Fatigue Specimen, Smith, I.J., Smith, I.F.C. and Hurworth, S.J.XIII-1179-85, The Fatigue Performance Of Repaired Fillet Welds, Wylde, J.G.XIII-1180-85, Fitness-For-Purpose Assessment Of Misalignment In Transverse Butt Welds Subject To Fatigue Loading, Maddox, S.J.XIII-1181-85, Fatigue Behaviour Of Welded Components And Structures Agenda For The Strasbourg Meeting, Anon.XIII-1182-85, Commission XIII, List Of Members Of The Commission, Harrison, J.D.XIII-1183-85, Commission XIII, List Of Documents Of The Commission From July 1984 To September 1985, Anon.XIII-1184-85, Statistical Analysis Of Three Groups Of Fatigue Data By Various Methods, Anon.XIII-1185-85, Commission XIII, Working Programme 1985-1986, Anon.XIII-1186-85, Commission XIII, Minutes Of The Meetings Held In Strasbourg. Meeting Held On 3rd September 1985, Anon.XIII-1187-85, Commission XIII, Annual Report 1984-1985, Anon.XIII-1189-86, Data Sheets On Fatigue Properties For Butt Welded Joints Of SPV50 Steel

Page 228

Plate For Pressure Vessels -Effect Of Stress Ratio-, Anon.XIII-1190-86, Data Sheets On Fatigue Crack Propagation Properties For Butt Welded Joints Of SB42 Carbon Steel Plate For Boilers And Other Pressure Vessels -Effect Of Stress Ratio-, Anon.XIII-1191-86, Data Sheets On Fatigue Crack Propagation Properties For Butt Welded Joints Of SPV50 (Si-Mn, 500N/mm2 YS) Steel Plate For Pressure Vessels -Effect Of Stress Ratio-, Anon.XIII-1192-86, Data Sheets On Fatigue Properties For Weld And HAZ Materials Of SPV50 (Si-Mn, 500N/mm2 YS) Steel Plate For Pressure Vessels, Anon.XIII-1193-86, Fatigue Strength Of Ship Hull Member In Use Of High Tensile Steel, Matoba, M. and Inoue, K.XIII-1194-86, Work In Progress On Fatigue Strength Of Welded Joints In Japan - March 1986,Iida, K.XIII-1195-86, Fatigue Investigation On Orthotropic Steel Bridge Deck, Agerskov, H. and Bjornbak-Hansen, J.XIII-1196-86, Fatigue Life Prediction Of Aluminium Components Based On Local Stress Fields, Jaccard, R.XIII-1197-86, Annual Report Of Subcie XV-E. Design Of Welded Tubular Structures, Wardenier, J.XIII-1198-86, Fatigue Strength Evaluation Of Welded Joints Considering High Tensile Residual Stresses, Ohta, A., Maeda, Y., Mawari, T., Nishijima, S. and Nakamura, H.XIII-1199-86, Application Of Fatigue Crack Propagation Properties Of Welded Joints For Design Or Inspection Of Structures, Ohta, A.XIII-1200-86, Large Scale Fatigue Tests For The Design Of Long Span Bridges Under The Honshu-Shikoku Bridge Project, Tajima, J., Takayama, A. and Miki, C.XIII-1201-86, Fatigue Strength Of Electron Beam Welded Joint Of Carbon Steel, Iida, K., Yamauchi, T., Satoh, M. and Takano, G.XIII-1202-86, Bending Fatigue Strength Of Butt Welded Plate With Uranami Bead, Iida, K., Kho, Y., Fukakura, J., Nihei, M., Iwadate, T. and Nagai, H.XIII-1203-86, Effects Of Welding Residual Stresses On Fatigue Crack Growth Behavior In Butt-Welded Joints Of STS42 And SM50A Steels, Kitsunai, T., Kobayashi, H., Narumoto, A., Ishizuka, T. and Iida, K.XIII-1204-86, Fatigue Strength Of Tension Members With Welded Gussets And Life Estimation By Fracture Mechanics, Yamada, K., Sakai, Y., Kondo, A. and Kikuchi, Y.XIII-1205-86, Work In Progress On Fatigue Strength Of Welded Structures In The Federal Republic Of Germany - 1986, Petershagen, H.XIII-1206-86, Formation And Growth Of Cracks In Feedwater Pipes Of Boiling Water Reactors(BWR) And Pressurized Water Reactors (PWR), Anon.XIII-1207-86, Crack Propagation In Butt Welds Of Shipbuilding Steel Containing Internal Defects, Petershagen, H.XIII-1208-86, A Comparison Of Different Approaches To The Fatigue Strength Assessment OfWelded Components, Petershagen, H.XIII-1209-86, Research In Progress In Australia - 1986, Piper, J.P.XIII-1210-86, Work In Progress On The Fatigue Strength Of Welded Structures In The UK, 1984-86. Toyko - 1986, Anon.XIII-1211-86, Travaux En Cours En France Sur La Fatigue Des Joints Soudes. Juin 1986, Anon.

Page 229

XIII-1212-86, Minutes Of The Meeting Of Working Group No.4 On The Influence Of Weld Defects On Fatigue Of Welded Construction. Copenhagen, 13th March 1986, Anon.XIII-1213-86, Conduite D'Eau. Type De Construction Accidentee, Anon.XIII-1214-86, Annual Report Of IIW Joint Working Group XIII-XV For 1986, Hobbacher, A.XIII-1215-86, Fatigue Of Welded Components And Structures. Fatigue Design Rules For Welded Pressure Vessels., Maddox, S.J.XIII-1216-86, Questionnaire Concerning The Working Of Commission XIII Of The InternationalInstitute Of Welding, Anon.XIII-1217-86, Post-Weld Surface Treatments To Improve Fatigue Properties Of Aluminium Weldments - AWRA Document P3-11-85, Polmear, I.J.XIII-1218-86, Fatigue Life Improvement By Water-Jet Erosion, Maddox, S.J. and Padilla, J.A.XIII-1219-86, Fatigue Tests On Fillet Welded Joints Under Variable Amplitude Loading, Gurney, T.R.XIII-1220-86, Commission XIII, Agenda For The Tokyo Meeting, Anon.XIII-1221-86, Commission XIII, List Of Members Of The Commission, Anon.XIII-1222-86, Commission XIII, List Of Documents Of The Commission From September 1985 To July 1986, Anon.XIII-1223-860, Commission XIII, Working Programme 1986-1987, Anon.XIII-1224-86, Commission XIII, Minutes Of The Meetings Held In Tokyo, 15th - 18th July 1986,Anon.XIII-1225-86, Commission XIII, Annual Report 1985 1986, Anon.XIII-1226-86, Contribution A L'Etude Du Soudage Par Point Par Faisceau Laser, Bousseau, M., Perrault, S. and Signamarcheix, J.M.XIII-1227-86, Possibilites Offertes Par La Mecanique De La Rupture Pour Le Dimensionnement A La Fatigue Des Joints Soudes, Recho, N.XIII-1228-86, Regularities Of The Welded Joint Deformation And Fracture In The Limited Fatigue Life Region, Trufiakov, V.I. and Yakubovsky, V.V.XIII-1229-86, Commission XIII, Boiler Shell Failure, Anon.XIII-1230-87, Effect Of Low Temperatures On Strength Of Welded Structures Subjected To Cyclic Loading, Larionov, V.V. and Khanukhov, Kh.M.XIII-1232-87, Very Low Cycle Fatigue Life Influenced By Tensile Or Compressive Prestrain, Iida, K.XIII-1233-87, Work In Progress In Fatigue Strength Of Welded Joints In Japan - April 1987, Iida, K.XIII-1234-87, Fatigue Crack Growth Rates Of Structural Steels Under Constant And Variable Amplitude Block Loading, Yamada, K.XIII-1235-87, A Review Of Japanese Research Into The Fatigue Of A 5083 Alloy Construction For LNG Spherical Tanks, Nagamoto, R., Matoba, M., Sakai, D. and Hashimoto, K.XIII-1237-87, Influence Of Residual Welding Stresses On A Low-Cycle Strength Of Butt WeldsAnd A Rate Of Crack Propagation In The Weld Zone, Larionov, V.V., Ingatieva, V.S. and Kulakhmetiev, R.R.XIII-1238-87, Fatigue Crack Growth Rate Diagrams Under Random Loading With An Exponential Distribution, Tomita, Y. and Hashimoto, K.XIII-1239-87, Influence Of Residual Stresses On S-N Curve Parameters Of Aluminium Weldments, Kosteas, D.XIII-1240-87, Summarizing Results Of The Aluminium Welded Beam Fatigue Programme, Kosteas, D.

Page 230

XIII-1241-87, Life Estimation Of Aluminium Weldments Taking Into Account Crack Behavior InThe Weld Region, Graf, U. and Kosteas, D.XIII-1242-87, Slope Of The S-N Curve And High-Cycle Fatigue Behaviour Of Longitudinal Stiffeners In As-Welded And Stress-Relieved States, Sonsino, C.M., Bohme, D., Kulka, C. andHelwig, R.XIII-1243-87, The Application Of An Engineering Critical Assessment In Design, Fabrication And Inspection To Assess The Fitness For Purpose Of Welded Products. Draft Proposal For ISO Standard., Anon.XIII-1244-87, Aptitude A L'Emploi De Soudures Avec Defauts Non Plans -Aspect Fatigue-, Dhers, J.XIII-1245-87, Fatigue Behaviour Of Plated Steel Sheets And Of Their Welded Structures, Poyet, P., Granger, G. and Maillard-Salin, C.XIII-1246-87, Statistical Analysis Of The Effect Of Different Parameters On The Fatigue Behaviour Of Typical Welded Joints, Lieurade, H.-P., Sixou, Y. and Busch, M.L.XIII-1247-87, The Influence Of Shot-Peening On The Fatigue Strength Of Welded Joints In High-Strength Structural Steels, Picouet, L., Bignonnet, A., Lieurade, H.-P., Castex, L. and Lebrun, J.L.XIII-1248-87, Aptitude A L'Emploi De Joints De Soudure Avec Defauts Geometriques. Synthese Des Travaux Du Groupe De Travail N(4, Dhers, J.XIII-1249-87, Travaux En Cours En France Sur La Fatigue Des Joints Soudes - Juin 1987, Anon.XIII-1250-87, Cone De Turbine. Type De Construction Accidentee, Anon.XIII-1251-87, Comments Of The German Delegation To IIW-Document XIII-1215-86 Fatigue Design Rules For Pressure Vessels, Maddox, S.J.XIII-1252-87, A Study On A Fracture Accident In An Imported Ethanol Assembly, Benhe, Z.XIII-1253-87, Application Of The IIW Recommendations To The Optimum Design Of CHS AndSHS Trusses Subject To Fluctuating Loads, Farkas, J.XIII-1254-87, Annual Report Of IIW Joint Working Group XIII-XV For 1987, Hobbacher, A.XIII-1257-87, Effect Of Residual Stresses And Stress-Ratio On The Fatigue Strength Of Welded Components, Lieurade, H.P.XIII-1258-87, Commission XIII, Agenda For The Sofia Meeting, Anon.XIII-1259-87, Commission XIII, List Of Members, Anon.XIII-1260-87, Commission XIII, List Of Documents Of The Commission From July 1986 - June 1987, Anon.XIII-1261-87, Commission XIII, Working Programme 1987-1988, Anon.XIII-1262-87, Commission XIII, Minutes Of The Meetings Held In Sofia 6th-10th July 1987, Anon.XIII-1263-87, Commission XIII, Annual Report 1986 - 1987, Anon.XIII-1264-87, Effect Des Contraintes Residuelles Sur La Propagation A 20(C Des Fissures En Fatigue Dans Un Joint Heterogene Acier Inoxydable Austenitique - Acier Ferritique, Zahouane,A.J., Gauthier, J.P. and Petrequin, P.XIII-1266-88, Recommendations For Assessment Of Weld Imperfections In Respect To Fatigue, Hobbacher, A. and Wilhelmshaven, F.H.XIII-1267-88, Fatigue Investigation On Preloaded Welded Connections, Agerskov, H.XIII-1269-88, Work In Progress On The Fatigue Strength Of Welded Structures In The FederalRepublic Of Germany - Hamburg 1988, Anon.XIII-1270-88, Low Cycle Fatigue Behaviour Of The Ferritic Steel Fe E 460 And Austenitic Steel

Page 231

X 10 Cr Ni Ti 18 9 (AISI 321) In As-Received And Welded States-Investigation Of Weld Defects, Sonsino, C.M.XIII-1271-88, Review On Fatigue Fracture Mechanics For Welded Joints, Radaj, D.XIII-1272-88, Fatigue Crack Propagation In Plate Panels With Welded Stiffeners, Fricke, W. and Petershagen, H.XIII-1273-88, Work In Progress On Fatigue Strength Of Welded Joints In Japan - April 1988, Iida, K.XIII-1274-88, The Improvement Of Fatigue Strength Of Steel Constructions With Non-Load Carrying Fillet Welds By Additional Weld Run With Coated Electrodes, Hentschel, K., Schmidt,M. and Hilpert, K.XIII-1275-88, Potential Use Of High Strength Structural Steel In Offshore Construction, Lieurade, H.-P. and Lecoq, H.XIII-1276-88, The Influence Of Cathodic Protection And Post Weld Improvement On The Fatigue Resistance Of Steel Welded Joints, Bignonnet, A., Papadopoulos, Y., Barrere, F., Lieurade, H.-P. and Lecoq, H.XIII-1277-88, Corrosion Fatigue Of Steel In Marine Structures. A Decade Of Progress, Bignonnet, A.XIII-1278-88, An Analysis Of Fatigue Crack Growth From Blowholes In Longitudinal Welded Joints, Miki, C., Mori, T., Sakamoto, K. and Sasaki, T.XIII-1279-88, Fatigue Strengths Of Box Section Truss Chord With Corner Joints, Takena, K., Hirano, S., Itoh, F. and Miki, C.XIII-1280-88, Fatigue Strengths Of Diaphragm Joint In Box-Section Truss Chords Of High Strength Steel, Takena, K., Shimokawa, H., Itoh, F. and Miki, C.XIII-1281-88, Fatigue Tests Of Welded Details On The Long Life Region And Fracture Mechanics Analysis, Yamada, K., Shigetomi, H., Nagatsu, S. and Zhiliang, Ma.XIII-1282-88, Fatigue Strength Of Field-Welded Rib Joints Of Orthotropic Steel Decks, Yamada, K., Kondo, A., Aoki, H. and Kikuchi, Y.XIII-1284-88, Travaux En Cours En France Sur La Fatigue Des Joints Soudes - Avril 1988, Anon.XIII-1285-88, Fatigue Des Joints Soudes Par Point Synthese Bibliographique Des Travaux Realises En France, Dhers, J.XIII-1286-88, Deux Exemples D'Application Pratique Des Approaches Probabilistes Dans Le Domaine De La Fatigue, Zehri, M.XIII-1287-88, Evaluation De La Duree De Vie Des Joints Soudes En Croix Transversaux (K 4) A L'Aide De La Mecanique De La Rupture, Salhi, B. and Le Duff, J.-A.XIII-1288-88, Cyclic Fatigue Of Nodes And Welded Joints Of Offshore Units, Anon.XIII-1289-88, Methods Of Improving The Fatigue Strength Of Welded Joints By Various Toe Treatments -April 1988, Anon.XIII-1290-88, Annual Report Of IIW Joint Working Group XIII-XV 1988, Hobbacher, A.XIII-1293-88, Simple Curves For Material Selection And Endurance Design Of Aluminium Structures, Rahka, K.XIII-1294-88, The Theoretical And Experimental Estimate Of Welded Joint Fatigue Life Scattering Under Low-Cycle Loading, Yakubovsky, V.V. and Dolezhalov, V.V.XIII-1295-88, Work In Progress On The Fatigue Strength Of Welded Structures In The Netherlands, Anon.XIII-1296-88, IIW Anonymous Enquiry Into Cases Of The Application Of Fitness-For-Purpose Criteria To The Assessment Of Welded Structures, Anon.

Page 232

XIII-1300-88, Commission XIII, List Of Members Of The Commission, Anon.XIII-1301-88, Commission XIII, List Of Documents Of The Commission From July 1987 - June 1988, Anon.XIII-1302-88, Commission XIII, Working Programme 1988-1989, Anon.XIII-1303-88, Commission XIII, Minutes Of The Meetings Held In Vienna, 5th - 9th July 1988, Anon.XIII-1304-88, Commission XIII, Annual Report 1987 -1988, Anon.XIII-1305-89, Stress Singularity, Notch Stress And Structural Stress At Spot-Welded Joints, Radaj, D.XIII-1306-89, Size Effects In Machine Components And Welded Joints, Haagensen, P.J., Slind, T. and Orjasaeter, O.XIII-1307-89, Fatigue Crack Growth Under Random Loading The Equivalent Loading Approach, Bignonnet, A., Sixou, Y. and Verstavel, J.M.XIII-1308-89, Resistance A La Fatigue Sous Cargement D'Amplitude Variable De Joints Soudes Grenailles, Bignonnet, A.XIII-1310-89, Commission XIII, Annual Report 1988 - 1989, Anon.XIII-1311-89, Local Stress Parameters At The Weld Spot Of Various Specimens, Radaj, D. and Mohrmann, W.XIII-1312-89, Local Fatigue Strength Characteristic Values For Spot Welded Joints, Radaj, D.XIII-1313-89, The Influence Of Undercut On The Fatigue Strength Of Welds - A Literature Survey (Revised Version Of doc. XIII-1120-83), Petershagen, H.XIII-1314-89, Collapse Of A Gantry Crane, Anon.XIII-1317-89, A Method For Obtaining Conservative S-N Data For Welded Structures, Nakamura, H., Nishijima, S., Ohta, A., Maeda, Y., Uchino, K., Kohno, T., Toyomasu, K. and Soya, T.XIII-1318-89, Fatigue Crack Propagation In Tensile Residual Stress Fields Of Welded Joints Under Fully Compressive Cycling, Ohta, A., Kosuge, M., Mawari, T. and Nishijima, S.XIII-1319-89, Near-Threshold Fatigue Crack Propagation In Welded Joints Under Random Loadings, Ohta, A., Maeda, Y., Machida, S. and Yoshinari, H.XIII-1320-89, Fatigue Crack Propagation Properties Of HT80 Steel Welded Joints Heat Treated For Relieving Residual Stresses, Ohta, A., Kosuge, M., Mawari, T. and Nishijima, S.XIII-1321-89, Fatigue Crack Propagation Curve For Design Of Welded Structures, Ohta, A., Maeda, Y., Kosuge, M., Machida, S. and Yoshinari, H.XIII-1322-89, Significant Effect Of Thermal Stresses On Fatigue Crack Propagation Properties, Ohta, A., Kosuge, M., Matsuoka, S., Takeuchi, E., Muramatsu, Y. and Nishijima, S.XIII-1323-89, Data Sheets On Fatigue Properties For Butt Welded Joints Of SUS304-HP (18Cr-8Ni) Hot Rolled Stainless Steel Plate -Effect Of Stress Ratio-, Anon.XIII-1324-89, Data Sheets On Fatigue Crack Propagation Properties For Butt Welded Joints Of SUS304-HP(18Cr-8Ni) Hot Rolled Stainless Steel Plate -Effect Of Stress Ratio-, Anon.XIII-1325-89, Data Sheets On Fatigue Properties For Weld And HAZ Materials Of SB42 (C-Si, 420N/mm2TS) Carbon Steel Plate For Boilers And Other Pressure Vessels, Anon.XIII-1326-89, Geometrical Parameters Of Butt And Fillet Welds And Their Influence Of The Welded Joint Fatigue Life, Yakubovskii, V.V. and Valteris, I.I.XIII-1327-89, Imitative Simulation Of Welded Joint Fracture Under Low-Cycle Loading, Lukjanov, V.F. and Korobtsov, A.S.XIII-1328-89, An Analysis Of Fatigue Strength And Life Units Quantities For Correlation With Tensile Strength And Ductility, Rahka, K.

Page 233

XIII-1330-89, Fatigue D'Assemblages Soudes Par Points. Revue Bibliographique, Dhers, J.XIII-1331-89, Fatigue Strength Of Spot Welded Beams In High Strength Steels - Progress Report, Sperle, J.O. and Jonsson, M.XIII-1332-89, Work In Progress On Fatigue Strength Of Welded Joints In Japan - June 1989, Iida, K.XIII-1333-89, Effect Des Contraintes Residuelles Sur La Propagation Des Fissures A Temperature Ambiante, Dans Un Joint Soude Heterogene (Acier Ferritique -Acier Inoxydable Austenitique), Zahouane, A.I., Gauthier, J.P. and Marini, B.XIII-1334-89, Improvement Of Welded Joint Formance By Explosion Treatment, Titov, V.A., Petushkov, V.G., Mikheev, P.P. and Malei, V.N.XIII-1335-89, Fatigue Resistance Of Welded Joints Under Combined Stress State, Klykov, N.A.XIII-1336-89, Annual Report Of Joint Working Group XIII-XV (1989), Hobbacher, A.XIII-1338-89, Proposed IIW Enquiry Into Cases Of The Application Of Fitness-For-Purpose Criteria To The Assessment Of Welded Components And Structures, Maddox, S.J.XIII-1339-89, Aspects Of The Improvement In Fatigue Strength Of Fillet Welds By Peening, Maddox, S.J.XIII-1340-89, Improving The Fatigue Strength Of Welding Joints By Grinding - Techniques And Benefits, Booth, G.S.XIII-1341-89, Cumulative Damage Of Welded Joints, With Particular Reference To Recent Work At The Welding Institute, Gurney, T.R.XIII-1342-89, Application Of Fatigue Design Rules For Welded Steel Joints, Wylde, J.G.XIII-1343-89, Working Group XIII - WGI Fatigue Test Methods For Welded Components. Annual Report For 1989, Anon.XIII-1344-89, Enquiry Of The IIW On Fatigue Fractures Occurring In Welded Structures. Fatigue Cracking In An Orthotropic Bridge Deck, Anon.XIII-1345-89, Enquiry Of The IIW On Fatigue Fractures Occurring In Welded Structures. Fatigue Failure Of Closure Weld In A Tubular Member, Anon.XIII-1346-89, I.I.W. Commission XIII Working Group 4 Annual Report 1988-1989, Anon.XIII-1350-90, Fatigue Strength Of Welded Lap Plate Connection, Agerskov, H.XIII-1351-89, Commission XIII, Agenda For 1989 Annual Assembly In Helsinki, Anon.XIII-1352-89, Commission XIII, List Of Members Of The Commission, Anon.XIII-1353-89, Commission XIII, List Of Documents Of The Commission From September 1988 - July 1989, Anon.XIII-1354-89, Fatigue Of Welded Structures. Research In Progress In Australia - 1989, Ford, P.R.XIII-1356-89, Examination Of Cracked Expansion Joints - I.D. Ducts To Stack, Loy Yang A Power Station, Goonan, G.M. and Ellery, A.R.XIII-1357-89, Heterogeneity Of Static And Cyclic Properties Of Welded Joint Metal, Yakubovskii, V.V. and Dolezhalov, V.V.XIII-1364-90, Work In Progress On Fatigue Strength Of Welded Joints In Japan - May 1990, Iida, K. and Inoue, I.XIII-1365-90, Fatigue Analysis Of Plate Elements With Grove Welded Attachments Using Fracture Mechanics, Yamada, K. and Agerskov, H.XIII-1366-90, Improvement Techniques, Haagensen, P.J.XIII-1367-90, Work In Progress On The Fatigue Strength Of Welded Structures In The FederalRepublic Of Germany, Anon.

Page 234

XIII-1369-90, The Effect Of Post-Weld Explosion Treatment On The Fatigue Strength Of Plates With Longitudinal Stiffeners, Paetzold, H. and Petershagen, H.XIII-1371-90, Uncertainties, Confidence Intervals And Design Criteria, Huther, M., XIII-1373-90, Eclatement Inopine D'Une Roue De Ventilateur, de Leiris, H. and Waeckerle, R.XIII-1374-90, Annual Report Of Subcie XV-E. Design Of Welded Tubular Structures, Wardenier, J.XIII-1377-90, Fatigue Crack Propagation In Aluminium, Jaccard, R.XIII-1378-90, Multiparameter Design Optimisation In Respect Of Stress Concentrations, Radaj, D. and Zhang, S.XIII-1380-90, Fatigue Testing Of Welded Components, Lieurade, H.P.XIII-1381-90, Nucleation And Propagation Of Fatigue Cracks In Welds Under Small Amplitude Cycling Stresses, Chaburkin, V.F., Klykov, N.A. and Myshenkov, V.N.XIII-1382-90, Long Life Fatigue Behavior Of Fillet Welded Joints Under Computer Simulated Highway And Railroad Loading, Miki, C., Murakoshi, J., Toyoda, Y. and Sakano, M.XIII-1383-90, A Survey Of Fatigue Cracking Experience In Steel Bridges, Miki, C. and Sakano,M.XIII-1384-90, Early Stage Propagation Behavior Of Fatigue Cracks In Fillet Welded Joints, Miki, C., Sakano, M., Toyoda, Y. and Yoshizawa, T.XIII-1385-90, Parameter Normalization Of Welds And Welded Defects Under Alternating Loads, Klykov, N.A. and Klykov, S.N.XIII-1386-90, Service Reliability And Fatigue Life Of Welded Joints On Large-Sized High-Pressure T-Pieces Produced By Electron Beam Welding, Yakubovskii, V.V., Chaburkin, V.F., Bolotov, A.S., Kovbasenko, S.N., Val'teris, I.I. and Novozhilov, V.V.XIII-1387-90, Service Loading And Low-Cycle Fatigue Life Of Welded Joints On Large-Sized Tanks For Petroleum Products, Yakubovskii, V.V., Petushkov, V.G., Mel'nik, S.A. and Pervoi, V.M.XIII-1388-90, Work In Progress On Fatigue Strength Of Welded Components And Structures In The United Kingdom. July 1990, Maddox, S.J.XIII-1389-90, Thermoelastic Determination Of Stress Intensity Factors For Toe Cracks In Fillet Welded Joints And Comparison With Finite Element Results, Chan, S.W.K. and Tubby, P.J.XIII-1390-90, The Fatigue Strength Of Electron Beam Transverse Butt Welds In Low Alloy Ni-Cr-Mo Steels - Further Endurance And Fracture Mechanics Tests, Andrews, R.M. and Punshon, C.S.XIII-1393-90, Commission XIII, Agenda For 1990 Annual Assembly In Montreal, Anon.XIII-1396-90, Simplified Formulae For Stress Intensity Factors Of Spot Welds, Radaj, D. and Zhang, S.XIII-1397-90, Stress Intensity Factors For Spot Welds Between Plates Of Dissimilar Materials, Radaj, D. and Zhang, S.XIII-1398-90, Fatigue Strength Of Welded Connections Of Tubular Structures Under Complex Loading, Garf, E.F. and Lisnichenko, E.N.XIII-1399-90, Commission XIII, List Of Members Of The Commission, Anon.XIII-1400-90, Commission XIII, List Of Documents Of The Commission From August 1989 - July 1990, Anon.XIII-1401-90, Commission XIII, Working Programme 1990-1991, Anon.XIII-1402-90, Commission XIII, Minutes Of The Meeting Held In Montreal, 24th to 27th July 1990, Anon.XIII-1404-91, Influence Of Weld Parameters On The Fatigue Strength Under C.A. And V.A.

Page 235

Loading Of Welded Joints In HSLA Steels, Overbeeke, J.L., Alting, T.J. and Jonkers, P.A.M.XIII-1405-91, Influencing Factors On Thickness Effect Of Fatigue Strength In As-Welded Joints For Steel Structures, Yagi, J., Machida, S., Tomita, Y., Matoba, M. and Soya, I.XIII-1407-91, Effects Of Plate Thickness And Heat Input On Fatigue Strength Of Non-Load-Carrying Fillet Welded Joints, Matsuoka, K., Takahashi, I., Yoshii, T., Iidaka, H. andFujii, E.XIII-1408-91, Fatigue Analysis Of Welded Connections Based On Local Stresses, Kottgen, V.B., Olivier, R. and Seeger, T.XIII-1409-91, Application Of The Local Approach To The Fatigue Strength Assessment Of Welded Structures In Ships, Petershagen, H., Fricke, W. and Massel, T.XIII-1410-91, A Comparison Of Two Different Approaches To The Fatigue Strength Assessment Of Cruciform Joints, Petershagen, H.XIII-1411-91, Fatigue Life Prediction Of Offshore Steel Structures Under Spectrum Loading, Agerskov, H. and Pedersen, N.T.XIII-1412-91, Annual Report Of Subcie XV-E. Design Of Welded Tubular Structures, Wardenier, J.XIII-1413-91, Work In Progress On Fatigue Strength Of Welded Joints In Japan - April 1991, Iida, K. and Inoue, H.XIII-1414-91, Definition Of Hot Spot Stress In Welded Plate Type Structure For Fatigue Assessment, Yagi, J., Machida, S., Tomita, Y., Matoba, M. and Kawasaki, T.XIII-1415-91, Effect Of Improving Methods On The Fatigue Strength Of Welded Aluminium Joints, Hobbacher, A.XIII-1416-91, Recommendation For Hot Spot Stress Definition In Welded Joints, Huther, M. and Henry, J.XIII-1418-91, An Approximate Solution To Take Into Account The S-N Curve Change Of SlopeIn Probabilistic Approaches, Parmentier, G., Huther, M. and Lacroix, V.XIII-1419-91, Evaluation Of Effect Of Plate Thickness On Fatigue Strength Of Butt Welded Joints By A Test Maintaining Maximum Stress At Yield Strength, Ohta, A., Mawari, T. and Suzuki, N.XIII-1420-91, Fatigue Strength Of Butt Welded Al-Mg Aluminium Alloy: Tests With Maximum Stress At Yield Strength, Ohta, A. and Mawari, T.XIII-1421-91, Data Sheets On Fatigue Properties For Butt Welded Joints Of A5083P-O (Al-4.5Mg-0.6Mn) Aluminium Alloy Plates, Anon.XIII-1423-91, Annual Report Of Joint Working Group XIII-XV (1991), Hobbacher, A.XIII-1424-91, Fatigue Crack Growth Calculations Using Stress Intensity Factors For Weld Toe Geometries, Dijkstra, O.D., Snijder, H.H. and Van Straalen, I.J.XIII-1425-91, A Fracture Mechanics Approach To The Assessment Of The Remaining Fatigue Life Of Defective Welded Joints, Dijkstra, O.D., Snijder, H.H. and van Rongen, H.J.M.XIII-1427-91, Evaluation Of Fatigue Crack Propagation Properties Under Random Loading Avoiding Crack Closure, Suzuki, N., Ohta, H. and Ohuchida, H.XIII-1428-91, Effects Of Geometry And Loading Variables On The Fatigue Design Curve For Tubular Joints, Thurlbeck, S.D. and Burdekin, F.M.XIII-1429-91, Travaux En Cours En France Sur La Fatigue Des Joints Soudes, Anon.XIII-1430-91, Investigation Into The Fatigue Strength Of A Fillet Welded Assemblies In E-364 Steel As A Function Of The Penetration Of The Weld Subjected To Tensile And Bending Loads, Janosch, J.J., Lipinski, P. and Lebienvenu, M.XIII-1431-91, Etude Probabiliste De La Fissuration Des Noeuds Tubulaires Soudes, Nguedjio,

Page 236

C., Dang Van, K., Bignonnet, A. and Lieurade, H.P.XIII-1434-91, Working Group XIII-WG1 Annual Report For 1991, Anon.XIII-1437-91, Commission XIII, List Of Documents Of The Commission From August 1990 - July 1991, Anon.XIII-1438-91, Some Regularities Of Low-Cycle Fatigue Crack Propagation In The Welded Joints, Yakubovskii, V.V. and Dolezhalov, V.V.XIII-1439-91, Commission XIII, Minutes Of The Meeting Held In The Hague, 2nd to 5th July 1991, Anon.XIII-1440-91, Commission XIII, List Of Members Of The Commission, Anon.XIII-1441-91, Notch Effect Of Welded Joints Subjected To Antiplane Shear Loading, Radaj, D.and Zhang, S.XIII-1442-92, Fatigue Life Of Plate Elements With Groove Welded Attachments Under Stochastic Loading, Agerskov, H. and Ibso, J.B.XIII-1443-92, Work In Progress On The Fatigue Strength Of Welded Structures In The FederalRepublic Of Germany, Anon.XIII-1444-92, On The Relations Between Notch Stress And Crack Stress Intensity In Plane Shear And Mixed Mode Loading, Radaj, D. and Zhang, S.XIII-1445-92, Fatigue Tests With Hyperbaric Dry Butt Welded Specimens, Petershagen, H.XIII-1446-92, Classification Of SAW Butt Welds With Respect To Fatigue, Petershagen, H.XIII-1447-92, Fatigue Strength And Its Thickness Effect Of Steel Joints With Improved Weld, Soya, I., Seto, A. and Tanaka, Y.XIII-1448-92, Definition Of Hot Spot Stress In Welded Plate Type Structure For Fatigue Assessment, Machida, S., Matoba, M., Yoshinari, H. and Nishimura, R.XIII-1449-92, Effect Of Yield Strength On Basic Fatigue Strength Of Welded Joints, Ohta, A., Maeda, Y. and Suzuki, N.XIII-1450-92, Fatigue Crack Propagation In Welded Joints Under Variable-Amplitude Loading In Synthetic Sea Water, Ohta, A., Maeda, Y., Machida, S. and Yoshinari, H.XIII-1451-92, Effect Of Young's Modulus On Basic Crack Propagation Properties Near FatigueThreshold, Ohta, A., Suzuki, N. and Mawari, T.XIII-1452-92, Commission XIII, Annual Report 1990 - 1991, Anon.XIII-1453-92, Commission XIII, Working Programme 1991 - 1992, Anon.XIII-1455-92, The Fatigue Design Of Welded Joints Made Of Square Hollow Sections, van Wingerde, A.M., Puthli, R.S., Wardenier, J. and Dutta, D.XIII-1456-92, Design Recommendations And Commentary Regarding The Fatigue Behaviour Of Hollow Section Joints, van Wingerde, A.M., Puthli, R.S., Wardenier, J., Dutta, D. and Packer, J.A.XIII-1459-92, Fatigue Of Large-Scale Welded Girders Under Simulated Highway Loadings, Miki, C., Toyoda, Y., Mori, T. and Enokido, N.XIII-1460-92, Fatigue Strength Of Corner Welds Of Truss Chords Containing Blowholes, Miki, C., Okukawa, A., Ooe, S. and Yasui, S.XIII-1463-92, Groupe De Travail N(4 Influence Des Defauts Rapport Annuel, Rabbe, P.XIII-1464-92, Travaux En Cours En France Sur La Fatigue Des Joints Soudes - Juin 1992, Anon.XIII-1467-92, Efficiency Of Improvement Techniques On The Fatigue Strength As A Function Of The Type Of Welded Joint, Lieurade, H.P., Castelucci, P., Flavenot, J.J., Lu, J. and Bel, G.XIII-1468-92, Tenue A La Fatigue De Toles Minces En Acier Soudees Par Faisceau Laser En Construction Automobile, Flavenot, J.F., Duboine, A., Cantello, M. and Gobbi, S.

Page 237

XIII-1469-92, Modelling Of The Fatigue Resistance Of Single-Lap Spot-Welded Steel Sheet, Reemsnyder, H.S.XIII-1470-92, FATIGUECALC - A Microcomputer Program For Fatigue Design Of Welded Joints - Description And Application In Design For Variable Amplitude Loading, Macdonald, K.A. and Tubby, P.J.XIII-1472-92, Agenda For 1992 Annual Assembly In Madrid, Anon.XIII-1473-92, Recent And Current Research In The UK Related To The Fatigue Strength Of Welded Components And Structures, July 1992, Maddox, S.J.XIII-1474-92, Working Group XIII-WG1 Annual Report, Lieurade, H.P.XIII-1476-92, Commission XIII, Minutes Of Meeting Held In Madrid, Anon.XIII-1477-92, Work In Progress On Fatigue Strength Of Welded Joints In Japan - July 1992, Iida, K. and Takahashi, I.XIII-1479-93, Fatigue Of Weathering Steels In As-Received And Welded Material States Within A Weathering Period Of Six Years, Muller, F.XIII-1480-93, Commission XIII, List Of Members Of The Commission, Anon.XIII-1481-93, A Review Of Fatigue Failures In LWR Plants In Japan, Iida, K.XIII-1482-93, Fatigue Strength Of Ceramic-Coated Steel At Elevated Temperature, Sonoya, K., Tomisawa, Y., Kitagawa, M. and Kajigaya, I.XIII-1483-93, Fatigue Strength Of Butt Welded Joints Under Maximum Stress Constant Random Loading Test, Ohta, A., Maeda, Y. and Suzuki, N.XIII-1484-93, Fatigue Strength Of Non-Load Carrying Cruciform Welded Joints By A Test Maintaining Stress At Yield Strength, Ohta, A., Matsuoka, K., Suzuki, N. and Maeda, Y.XIII-1485-93, Fatigue Crack Propagation In A Tensile Residual Stress Field Under A Two-StepProgrammed Test, Ohta, A., McEvily, A.J. and Suzuki, N.XIII-1486-93, Commission XIII, Working Programme 1992/1993, Anon.XIII-1487-93, Commission XIII, List Of Documents Of The Commission From August 1991 To July 1992, Anon.XIII-1488-93, Commission XIII, Annual Report 1991 To 1992, Maddox, S.J.XIII-1489-93, An Evaluation Method For High Cycle Fatigue Strength Of Steel Weld Joints, Uemura, T., Takeda, S., Takemasa, F., Nakamura, Y., Sakai, K. and Kodama, S.XIII-1490-93, Work In Progress On Fatigue Strength Of Welded Joints In Japan - May 1993, Iida, K. and Takahashi, I.XIII-1491-93, Comportement En Fatigue De L'Acier Inoxydable Austenitique UGINOX 18-7L# Pour Application Ferroviaire, Molinie, E., Hurtaud, B. and Hauser, J.M.XIII-1492-93, Towards Standardisation Of The Fatigue Bogie Design, Leluan, A., Rimbaud, M.and Tourrade, J.C.XIII-1493-93, An Aid For Defining The Fillet Weld Geometry In Symmetrically Welded Assemblies Subject To Fatigue Loads, Janosch, J.J. and Debiez, S.XIII-1494-93, Annual Report Of Joint Working Group XIII-XV For 1993, Hobbacher, A.XIII-1495-93, WG4 Annual Report, Le Pautremat, E.XIII-1496-93, Analysis Of The Results Of Fatigue Tests With Large Welded I-Beams, Kunzel, J. and Petershagen, H.XIII-1497-93, Damage At The Large Wind Power Plan GROWIAN - Fatigue Analysis Of Critical Welded Connections, Kottgen, V.B., Kottgen, R. and Seeger, T.XIII-1498-93, Working Group XIII - WG 5 Annual Report, Petershagen, H.XIII-1499-93, Fatigue Failure Of Steam Generator Tube In PWR Plant, Iida, K.XIII-1500-93, Rouleau D'Accumulateur De Ligne De Laquage, Anon.

Page 238

XIII-1501-93, Rouleau Moteur De Ligne D'Alimentation D'Un Laminoir A Froid - 4 Cages, Anon.XIII-1503-93, Etude Des Parametres Influencant Le Comportement En Fatigue Des Joints Soudes Par Procede Laser Sur Acier HLE, Fournel, B. and Peru, G.XIII-1504-93, Commission XIII Agenda For The Annual Assembly In Glasgow, Anon.XIII-1506-93, Fatigue Strengths Of Fillet-Welded Joints Containing Root Discontinuities, Miki, C., Tateishi, K., Fan, H.-d. and Tanaka, M.XIII-1507-93, Fatigue Strengths Of Attachments In Truss Chord Of 800MPa Steel, Miki, C., Okukawa, A., Ooe, S. and Takenouchi, H.XIII-1508-93, Fatigue Strength Of Scallop Details In Steel Bridge Member, Miki, C., Tateishi, K., Ishihara, K. and Kajimoto, K.XIII-1509-93, Fatigue Performances Of Repairing Welds With TIG-Dressing For Fatigue Damaged Highway Bridges, Takenouchi, H., Miki, C. and Sato, S.XIII-1510-93, The Effect Of Grinding And Peening On The Fatigue Strength Of Welded T-Joints, Haagensen, P.J.XIII-1511-93, Life Extension And Repair Of Welded Joints By Grinding And Peening, Haagensen, P.J. and Slind, T.XIII-1512-93, Commission XIII, Working Group 2 Annual Report 1992, Anon.XIII-1513-93, Commission XIII, Working Group 1 Annual Report, Lieurade, H.P.XIII-1514-93, Influence Of Residual Welding Stresses On The Fatigue Strength Of High Strength Structural Steels, Nitschke-Pagel, Th. and Wohlfahrt, H.XIII-1515-93, Effect De Traitements De Parachevement Sur Le Comportement En Traction Ondulee Ou En Flexion Ondulee D'Assemblages Bout A Bout En Acier E 490. Contraintes Residuelles En Pied De Refusion TIG., Lieurade, H.-P., Wyseur, M. and Tourrade, J.C.XIII-1516-93, Fatigue Testing Of Welded Components. I.S.O. Standard Proposal, Lieurade, H.P.XIII-1517-93, Assessment Of The Fatigue Strength Of Different Weld Toe Patterns On Fillet Welded Assemblies Subject To Transverse Loads, Janosch, J.J., Colchen, D., Debiez, S., Huther, I., Primot, L. and Lieurade, H.P.XIII-1518-93, Study Of Residual Welding Stress Using The Step-By-Step Hole Drilling And X-Ray Diffraction Method, Lu, J., Bouhelier, C., Lieurade, H.P., Baralle, D., Miege, B. and Flavenot, J.F.XIII-1519-93, Fatigue Tests On Two Types Of Joint To Establish Joint Classifications, Gurney,T.R.XIII-1520-93, The Influence Of Mean And Residual Stresses On The Fatigue Strength Of Welded Joints Under Variable Amplitude Loading - Some Exploratory Tests, Gurney, T.R.XIII-1525-94, An Investigation On Fatigue In Repair-Welded Tubular Joints In Offshore Structures, Agerskov, H. and Ibso, J.B.XIII-1526-94, Commission XIII, Minutes Of The Meeting Held In Glasgow, Anon.XIII-1527-94, Commission XIII, List Of Members Of The Commission, Anon.XIII-1528-94, Fatigue Crack Propagation In Welded Joints Under Random Loadings In Splash Zone, Ohta, A., Maeda, Y., Machida, S. and Yoshinari, H.XIII-1529-94, Fatigue Strength Of Welded Joints With Weld Metal Of Low Elastic Modulus, Seto, A. and Soya, I.XIII-1530-94, Stress Concentration Factor Formulas Widely Used In Japan, Iida, K. and Uemura, T.XIII-1531-94, Work In Progress On Fatigue Strength Of Welded Joints In Japan - April 1994,

Page 239

Iida, K. and Takahashi, I.XIII-1532-94, Geometric Effect On The Fatigue Properties Of A Stiffened Joint, Youn, J.G., Kim, H.S. and Park, D.H.XIII-1533-94, Data Sheets On Elevated Temperature Fatigue Properties For Butt Welded Joints Of SCMV2-2NT (1Cr-0.5Mo) Low Alloy Steel Plate For Boilers And Other Pressure Vessels, Anon.XIII-1534-94, Experimental And Theoretical Studies On Fatigue Strength Of Laser Welded Butt Joints, Partanen, T., Salminen, A., Lihavainen, V.-M. and Niemi, E.XIII-1535-94, On Size Effects In Fatigue Of Welded Joints, Partanen, T., Torvi, T. and Niemi, E.XIII-1536-94, Study Of Improving The Fatigue Property Of Welded Joints By Explosive Shock Wave Treatment, Liangshan, C., Huaining, C., Tieming, Z. and Zhongyao, S.XIII-1539-94, Recommendations On Fatigue Of Welded Components, Hobbacher, A.XIII-1539-95, Recommendations On Fatigue Of Welded Components, Hobbacher, A.XIII-1541-94, Work In Progress On The Fatigue Strength Of Welded Structures In Germany, Anon.XIII-1542-94, Multiaxial Fatigue Of Welded Flange-Tube And Tube-Tube Connections Under In-And Out-Of-Phase Loading And Local Stresses, Sonsino, C.M.XIII-1543-94, Damage At A Large Wind Power Plant, Anon.XIII-1544-94, Fatigue Resistance Of Spot Welds Under Multiaxial Loads, Hahn, O., Gieske, D., Klasfauseweh, U. and Rohde, A.XIII-1545-94, Commission XIII, Working Programme 1993/1994, Anon.XIII-1546-94, Commission XIII, Annual Report 1992 To 1993, Maddox, S.J.XIII-1547-94, Commission XIII, List Of Documents Of The Commission From August 1992 To July 1993, Anon.XIII-1548-94, Assessment Of The Fatigue Behavior Of Welded T-Joints During The First Stages Of Cracking, Janosch, J.J. and Colchen, D.XIII-1549-94, Numerical Simulation Of Some Multipass Submerged Arc Welding. Determination Of The Residual Stresses And Comparison With Experimental Measurements, Roelens, J.B.XIII-1550-94, Local Approach For Defining An Aid For The Design Department For Optimizing The Geometry Of Fatigue Loaded Fillet Welds, Janosch, J.J., Debiez, S. and Dang-Van, K.XIII-1551-94, Compressive Fatigue Strength Of Splice Joints In The Longitudinal Stiffeners Of Bridge Deck, Miki, C., Fujii, Y., Takenouchi, H. and Ono, S.XIII-1552-94, Bending Fatigue Strength Of Socket Welded Carbon Steel Pipe Joint, Iida, K., Higuchi, M. and Nakagawa, A.XIII-1553-94, Fatigue Strength Of Spot Welded Beams In High Strength Steels, Lindgren, C., Sperle, J.O. and Jonsson, M.XIII-1554-94, Commission XIII, Agenda For 1994 Annual Assembly In Beijing, Anon.XIII-1555-94, On The Determination Of Hot Spot Stresses In The Vicinity Of Edge Gussets, Niemi, E.J.XIII-1556-94, IIW - Commission XIII, Working Group 1 Annual Report, Lieurade, H.P.XIII-1558-94, WG4 Annual Report, Le Pautremat, E.XIII-1559-94, WG5 Repair Of Fatigue Cracks Annual Report, Anon.XIII-1560-94, Annual Report Of Joint Working Group XIII-XV For 1994, Hobbacher, A.XIII-1562-94, The Influence Of Improvement Techniques On Welded Joint Fatigue Strength, Hutch, I., Lieurade, H.P., Janosch, J.J., Chabrolin, B. and Ryan, I.

Page 240

XIII-1563-94, Weld Quality And The Cyclic Fatigue Strength Of Steel Welded Joints, Huther, I., Primot, L., Lieurade, H.P., Janosch, J.J., Colchen, D. and Debiez, S.XIII-1564-94, Fatigue Life Prediction By Crack Propagation, Calibration Of A Line-Spring Approach, Huther, M. and Xing, J.XIII-1565-94, Comportement En Fatigue D'Assemblage Soudes En Acier HLE 690. Influence D'Un Traitement De Parachevement, Molinie, E. and Mousley, E.XIII-1566-94, Etude Du Comportement En Fatigue A Basse Temperature De Joints Soudes En E355 RAD, Le Pautremat, E. and Vallet, C.XIII-1567-94, Travaux En Cours En France Sur La Fatigue Des Joints Soudes, Anon.XIII-1571-94, Commission XIII, Minutes Of The Meeting Held In Beijing, Anon.XIII-1572-94, Commission XIII, List Of Members Of The Commission, Anon.XIII-1573-94, Commission XIII, List Of Documents Of The Commission From August 1993 To July 1994, Anon.XIII-1574-95, Effective Means For Improving The Fatigue Strengths Of Welded Structures, Ohta, A., Suzuki, N. and Maeda, Y.XIII-1575-95, Commission XIII, Working Programme For 1994/1995, Anon.XIII-1576-95, Commission XIII, Annual Report 1993 To 1994, Maddox, S.J.XIII-1577-95, Work In Progress On Fatigue Strength Of Welded Joints In Japan - April 1995, Iida, K. and Takahashi, I.XIII-1579-95, Fatigue Strength Of Butt Welded Trough Joints With A Tack Welded Backing Strip In Steel Deck Panels, Miki, C. and Muller, J.XIII-1580-95, Fatigue Strength Of Welded Ship Structures, Anon.XIII-1581-95, Travaux En Cours En France Sur La Fatigue Des Joints Soudes 1994 - 1995, Galtier, A. and Rabbe, P.XIII-1582-95, Effect Of Plate Thickness On Fatigue Of Welded Components, Orjasater, O.XIII-1583-95, On Fatigue Crack Growth Simulation In A Transverse Double Lap Joint, Nykanen, T.XIII-1584-95, Commission XIII Working Group 2 Annual Report 1994-1995, Haagensen, P.J.XIII-1585-95, Assessment Of Fatigue Strength Of Nonwelded And Welded Structures Based On Local Parameters, Radaj, D.XIII-1586-95, Remarks On Safety Factor Values For Welded Aluminium Joints, Kosteas, D. and Ondra, R.XIII-1588-95, Background Document To Fatigue Design Curves For Welded Aluminium Components, Jaccard, R., Kosteas, D. and Ondra, R.XIII-1589-95, Correlating Design And Quality Requirements Of Welded Aluminium Structural Details In Fatigue, Kosteas, D., Bompard, S. and Mugnier, P.XIII-1590-95, Fatigue Strength Of Laserwelded Structural Steels With Thicknesses Between 8 and 20 mm, Weichel, F. and Petershagen, H.XIII-1591-95, Applications Of Local Approaches To The Fatigue Assessment Of Welded Tubular Joints, Bohlmann, B.XIII-1592-95, WG XIII-5 Repair Of Fatigue Cracks Annual Report, Anon.XIII-1594-95, Improvement Of Fatigue Strength In Welded Joint (In HSS And In Aluminium Alloy) By Ultrasonic Hammer Peening, Janosch, J.J., Koneczny, H. and Debiez, S.XIII-1596-95, WG 4 Annual Report, Galtier, A.XIII-1597-95, Data Sheets On Elevated-Temperature Fatigue Properties For Butt Welded Joints Of SB450 Carbon Steel Plate For Boilers And Other Pressure Vessels, Anon.XIII-1598-95, Data Sheets On Elevated Temperature Fatigue Crack Propagation Properties

Page 241

For Butt Welded Joints Of SCMV2-2NT(1Cr-0.5Mo) Low Alloy Steel Plate For Boilers And Other Pressure Vessels, Anon.XIII-1599-95, Data Sheet On Elevated Temperature Fatigue Crack Propagation Properties ForButt Welded Joints Of SB450 Carbon Steel Plate For Boilers And Other Pressure Vessels, Anon.XIII-1600-95, Parametric Study Of The Geometrical Stress On Fillet Welded Joint With Longitudinal Attachment, Huther, I., Lieurade, H.P. and Sayhi, N.XIII-1601-95, Analysis Of Results On Improved Welding Joints, Huther, I., Lieurade, H.P., Souissi, R., Nussbaumer, A., Chabrolin, B. and Janosch, J.J.XIII-1602-95, Collection Of Hot Spot S-N Curves Based On Tests Of Small Arc-Welded Steel Specimens, Partanen, T. and Niemi, E.XIII-1603-95, Fatigue Strength Of Welded Joints In Three Types Of Stainless Steel, Koskimaki, M. and Niemi, E.XIII-1604-95, Propagation En Fatigue D'Un Defaut Dans Un Joint Soude Par F.E. En Acier 16MnNiMo5. Influence D'Un Traitement De Revenu, Bousseau, M.XIII-1605-95, Statistics Versus Design S-N Curves And Design Life Time, Huther, M.XIII-1606-95, Commission XIII, Agenda For 1995 Annual Assembly In Stockholm, Anon.XIII-1611-95, Commission XIII, Minutes Of The Meeting Held In Stockholm, Anon.XIII-1612-95, Commission XIII, List Of Members Of The Commission, Anon.XIII-1613-95, Commission XIII, List Of Documents Of The Commission From August 1994 To June 1995, Anon.XIII-1614-95, Commission XIII, Working Programme 1995/96, Anon.XIII-1615-95, Commission XIII, Annual Report 1994-1995, Maddox, S.J.XIII-1618-96, Geometric Effect On The Fatigue Properties Of The Side Frame In A Hull Structure, Youn, G.J. and Kim, H.S.XIII-1619-96, Geometric Effect On The Fatigue Properties Of The Girder For A Stress Transitional Region, Youn, J.G. and Kim, H.S.XIII-1620-96, Fatigue Strength Of Butt Welded Joint With Undercut -Acceptable Level Of Undercut Depth For Power Plant Components-, Iida, K., Sato, M. and Nagai, M.XIII-1621-96, An Evaluation Method Of Fatigue Strength Of Non-Load Carrying Type Fillet Welded Joint Under Service Load, Mohri, M. and Uemura, T.XIII-1622-96, Analysis Of Variable Amplitude Fatigue Using Equivalent Constant Amplitude Stress Range, Niemi, E.XIII-1623-96, Thickness Effect In Welded T-Joints Subjected To Constant And Variable Amplitude Loading, Niemi, E.XIII-1624-96, Fatigue Crack Growth Simulations In Transverse Butt Welds Made On Permanent Backing Bars, Nykanen, T.XIII-1627-96, Effects Of Strength And Sulfur Content On Fatigue Strength Of Carbon Steel Weldments In Oxygenated High Temperature Water, Higuchi, M. and Iida, K.XIII-1628-96, Residual Stress Relaxation By Reversed Loading, Iida, K. and Takanashi, M.XIII-1629-96, Fatigue Failures Of Small Diameter Pipe Welds In PWR Plants, Tsujikura, Y.XIII-1630-96, WG XIII-5 Repair Of Fatigue Cracks, Annual Report, Petershagen, H.XIII-1631-96, The Influence Of Undercuts On The Fatigue Strength Of Butt Welds -A Parameter Study, Gosch, T. and Petershagen, H.XIII-1632-96, IIW Recommendation On The Repair Of Fatigue-Loaded Welded Structures, Anon.XIII-1633-96, Fatigue Design Of Cope Hole Details In Steel Bridges, Miki, C. and Tateishi, K.

Page 242

XIII-1634-96, Work In Progress On Fatigue Strength Of Welded Joint In Japan, Iida, K., Miki, C. and Nakamura, S.XIII-1636-96, Hot Spot S-N Curves Based On Fatigue Tests Of Small MIG Welded Aluminium Specimens, Partanen, T. and Niemi, E.XIII-1637-96, Fatigue Life Of As-Welded, Repaired And Hammer Peened Joints In High-Strength Structural Steel, Braid, J.E.M. and Militaru, D.V.XIII-1638-96, Very-Low-Cycle Fatigue Behavior Of Steel Pier Base Joint, Sakano, M., Murayama, H. and Misumi, Y.XIII-1640-96, Fatigue Behaviour Of TIG Improved Welds, Lopez Martinez, L., Blom, A.F. and Wang, G.S.XIII-1641-96, Spectrum Fatigue Of Improved Welded Joints - Modelling And Experiments, Wang, G.S., Lopez Martinez, L. and Blom, A.F.XIII-1642-96, Fatigue Strength Of Longitudinal Non-Load Carrying Welded Joints, Huther, I., Lieurade, H.P., Sayhi, N. and Buisson, R.XIII-1643-96, Fatigue Assessment Of Automobile Welded Structures, Fayard, J.-L., Dang Van,K. and Bignonnet, A.XIII-1644-96, Probabilistic Fatigue Analysis Of A Double Hull Tanker (Part 1), Maherault, S., Parmentier, G. and Recho, N.XIII-1645-96, Probabilistic Fatigue Analysis Of A Double Hull Tanker (Part 2), Maherault, S., Parmentier, G. and Recho, N.XIII-1646-96, Integration Of Weld Residual Stresses Into The Local Mechanical Approach For Optimising The Fatigue Strength Of Fillet Welded Assemblies, Janosch, J.J., Debiez, S., Clerge, M. and Dang van, K.XIII-1647-96, Towards A Numerical Model For Lifetime Prediction Of Spot Welded Structures Under Multiaxial Loading, Di Fant-Jaeckels, H., Galtier, A. and Barthelemy, J.Y.XIII-1648-96, Differences D'Endommagements Subis En Service Par Deux Batiments De Surface, Bousseau, M.XIII-1649-96, Statistics And Fatigue Test Programs In View Of Design S-N Curves, Huther, M. and Lieurade, H.P.XIII-1650-96, Fatigue Life Prediction Method And Calibration On T Joints, Huther, I., Lieurade, H.P. and Recho, N.XIII-1651-96, Mise En Evidence D'Une Fissure De Fatigue Au Moyen De L'Emission Acoustique, Bousseau, M. and Le Guen, F.XIII-1652-96, Effect Of The Welded Microstructures On Fatigue Strength, Huther, I., Lieurade, H.P. and Longaygue, X.XIII-1654-96, Travaux En Cours En France Sur La Fatigue Des Joints Soudes 1995 - 1996. Work In Progress In France On Fatigue Of Welded Joints, Galtier, A.XIII-1655-96, Database Of Fatigue Fractures In Welded Constructions, Galtier, A.XIII-1656-96, Commission XIII Working Group 1 Annual Report 1995-1996, Lieurade, H.P.XIII-1657-96, Annual Report 1995-1996. Commission XIII-Working Group 4, Galtier, A.XIII-1658-96, Introduction Of Welding Improvement Parameters For Design Of Marine Structure, Parmentier, G., Maherault, S., Lieurade, H.P. and Huther, I.XIII-1659-96, Fatigue Behaviour Of Stiffener/Lower Flange Connection In Steel Bridge Beams:Effects Of Simulated Weld Defects And Post Weld Improvement Methods, Menigault, J., Claeys, J. and Vigo, J.M.XIII-1662-96, Commission XIII, Minutes Of The Meeting Held In Budapest (DRAFT), Anon.XIII-1676-97, IIW Commission XIII, Working Group 3 Annual Report 96-97, Niemi, E.

Page 243

XIII-1677-98, Commission XIII, Working Group 4 Annual Report 1997-1998, Lieurade, H.P.XIII-1679-97, Annual Report Of IIW Joint Working Group XIII-XV, Hobbacher, A.XIII-1680-97, Fatigue Tests With Underwater Wet Repair-Welded Components Of Offshore Structures, Wernicke, R., Pohl, R. and Petershagen, H.XIII-1686-97, Thickness Effect On Fatigue Strength Of Out-Of-Plane Gusset Joint, Sakano, M.and Arai, M.XIII-1687-95, A Comparative Analysis Of Existing Test Data On Welded Aluminium Tubular Joints, Kosteas, D. and Gietl, B.XIII-1691-97, Commission XIII, Agenda For 1997 Annual Assembly In San Francisco, Anon.XIII-1696-97, Commission XIII, List Of Documents Of The Commission From September 1996 To July 1997, Anon.XIII-1698-97, Commission XIII, Minutes Of The Meeting Held In San Francisco, Anon.XIII-1702-97, Commission XIII, List Of Members Of The Commission, Anon.XIII-1703-97, Commission XIII, Working Programme 1997-98, Anon.XIII-1704-97, Commission XIII, Chairman's Report, Maddox, S.J.XIII-1705-98, Fatigue Performance Of Large Girth Welded Steel Tubes, Maddox, S.J. and Razmjoo, G.R.XIII-1706-98, Fatigue Strength Improvement By Using Newly Developed Low Transformation Temperature Welding Material, Ohta, A., Watanabe, O., Matsuoka, K., Siga, C., Nishijima, S., Maeda, Y., Suzuki, N. and Kubo, T.XIII-1707-98, Fatigue Crack Growth Simulations In Laser Welded Lap Joints, Nykanen, T.XIII-1708-98, The Laser Weld Repair Of Fatigue Cracks In Ship Steels, Brown, P.M., Shannon, G., Deans, W. and Bird, J.XIII-1709-98, Geometric Dependency On Fatigue Strength In Transverse Load-Carrying Cruciform Joint With Partial Penetration K Welds, Nykanen, T.XIII-1710-98, Comparison Of Variable Amplitude Fatigue Life Estimations Using Hot Spot And Fracture Mechanics Approaches, Niemi, E.XIII-1711-98, Influence Of Maximum Stress On Fatigue Crack Initiation Life Of Welded Steel Joints And Notched Steel Plates, Matsuoka, K. and Kobayashi, Y.XIII-1713-98, Fatigue Crack Propagation In C-Mn Steel HAZ Microstructures Tested In Air AndSeawater, Woollin, P.XIII-1714-98, Fatigue Performance Of Butt-Welded Joints Containing Various Defects, Miki, C., Fahimuddin, F., Kanai, T., Anami, K. and Machida, F.XIII-1715-98, Prediction Of Service Fatigue Strength Of A Welded Tubular Joint On The Basis Of The Notch Strain Approach, Radaj, D., Sonsino, M. and Flade, D.XIII-1717-98, Fatigue Assessment Of Welded Joints In AlMg4.5Mn Aluminium Alloy By Local Approaches, Sonsino, C.M., Radaj, D., Brandt, U. and Lehrke, H.P.XIII-1718-98, The Fatigue Behaviour Of 5 And 25 mm 5083 Aluminium-Alloy Weldments, Brandt, U., Lawrence, F.V. and Sonsino, C.M.XIII-1719-98, Evaluation Of The Fatigue Strength Of Longitudinal Welded Assemblies As A Function Of The Industrial Welding Practice; Application Of The Local Approach, Janosch, J.J.and Debiez, S.XIII-1721-98, Commission XIII, Working Group 1, Annual Report 1997-1998, Huther, M.XIII-1723-98, IIW Commission XIII, Working Group 3, Annual Report 97-98, Niemi, E.XIII-1724-98, Commission XIII, Working Group 4, Annual Report 1997-1998, Lieurade, H.P.XIII-1725-98, IIW Commission XIII-WG XIII-5 Repair Of Fatigue-Loaded Welded Structures Annual Report 1997/1998, Anon.

Page 244

XIII-1727-98, Commission XIII Annual Report, San Francisco 1997, Anon.XIII-1729-98, Progress In Fatigue Assessment Of Welded Hollow-Section Aluminium Structures, Macdonald, K.A. and Haagensen, P.J.XIII-1730-98, Fatigue Strength Of Structural Members With In-Plane Notches, Wagner, M.XIII-1731-98, Background To The New Fatigue Crack Growth Rate Recommendations Used InThe Revision Of PD6493:1991, King, R.N., Stacey, A. and Maddox, S.J.XIII-1732-98, Fatigue Assessment Of Repaired Structural Components, Konishi, T. and Miki, C.XIII-1733-98, Repair Of Fatigue Cracks Initiated Around Box Welds By Using Low Transformation Temperature Material, Ohta, A., Maeda, Y. and Suzuki, N.XIII-1734-98, Very Low Cycle Fatigue Properties Of Butt Welded Joints Containing Weld Defects (Study On Acceptable Size Of Defects In Girth Welds Of Gas Pipelines), Seto, A., Masuda, T., Machida, S. and Miki, C., Iida, K. and Kawahara, M.XIII-1735-98, Fatigue Strength Of HSS Steel Butt-Welded Joints. Effects Of Microdefects AndFailure Life Prediction, Buirette, C., Degallaix, G., Menigault, J. and Claeys, J.XIII-1736-98, S-N Fatigue Curves Of Welded Joints Submitted To Variable Amplitude Loading,Labesse, F., Recho, N., Lieurade, H.P. and Mervaux, P.XIII-1737-98, Local - Global Stress Analysis Of Fillet Welded Joints, Labesse, F. and Recho, N.XIII-1738-98, Computer Aided Fatigue Design Of Welded Joints By The Use Of Fracture Mechanics, Kiazand, R., Recho, N. and Lieurade, H.P.XIII-1740-98, Fatigue Strength Improvement T Welded Joints In Aluminium Alloys, Huther, I., Horn, A., Lieurade, H.P., Janosch, J.J. and Debiez, S.XIII-1742-98, A Fatigue Strength Guidance Note For Welded Ship Structure Assessment, Huther, M. and Beghin, D.XIII-1743-98, Commission XIII, Final Agenda For 1998 Annual Assembly In Hamburg, Anon.XIII-1744-98, Failure Of An Exercise Cycle, Anon.XIII-1745-98, The Efficiency Of Ultrasonic Impact Treatment For Improving The Fatigue Strength Of Welded Joints, Trufiakov, V.I., Statnikov, E.S., Mikheev, P.P. and Kuzmenko, A.Z.XIII-1746-98, Work In Progress On Fatigue Strength Of Welded Joints In Japan '98, Iida, K., Miki, C. and Nakamura, S.XIII-1747-98, Fatigue And Fracture Behaviour Of Welded Joints With Tensile Residual Stresses Under Cyclic Compression Loading, Wohlfahrt, H. and Pucelik, J.XIII-1749-98, Travaux En Cours En France Sur La Fatigue Des Joints Soudes 1997 - 1998. (Work In Progress In France On Fatigue Of Welded Joints), Galtier, A.XIII-1750-99, Fatigue In Welded High-Strength Steel Plate Elements Under Stochastic Loading, Agerskov, H., Petersen, R.I. and Lopez Martinez, L.XIII-1751-98, Commission XIII, Annual Report, Hamburg 1998, Anon.XIII-1752-98, Commission XIII, List Of Members Of The Commission, Anon.XIII-1753-98, Commission XIII, List Of Documents Of The Commission From July 1997 To September 1998, Anon.XIII-1754-98, Commission XIII, Working Programme 1998-99, Anon.XIII-1755-98, Commission XIII, Minutes Of The Meeting Held In Hamburg, Anon.XIII-1756-98, Commission XIII, Chairman's Report, Maddox, S.J.XIII-1758-99, Fatigue Strength Improvement Of Box Welds By Low Transformation Temperature Welding Wire And PWHT, Ohta, A., Watanabe, O., Matsuoka, K., Maeda, Y., Suzuki, N. and Kubo, T.

Page 245

XIII-1764-99, Commission XIII, Agenda For 1999 Annual Assembly In Lisbon, Anon.XIII-1767-99, Fatigue Behaviour Of Welded Medium And High Strength Steels -Evaluation On Basis Of Notch Factors And Local Stresses-, Kaufmann, H., Sonsino, C.M., Demofonti, G., Budano, S., Hanus, F., Wegmann, H., Sedlacek, G. and Muller, C.XIII-1768-99, Fatigue Design Data For Welded Stainless Steels, Maddox, S.J., Branco, C.M., Sonsino, C.M., Manteghi, S., Kueppers, M. and Infante, V.XIII-1769-99, A Fatigue Study On The Rehabilitation Of Welded Joints, Branco, C.M., Infante, V. and Maddox, S.J.XIII-1770-99, Fatigue Behaviour Of Butt Welds Of Duplex Stainless Steels, Branco, C.M. and Torcato, R.B.XIII-1771-99, Improvement Of Fatigue Strength Of Box Weld On Non-Quenched Steel By Using Low Transformation Temperature Welding Material, Machida, F., Fujita, T., Yoshiie, K. and Kubo, T.XIII-1776-99, Fatigue Performance Of Butt-Welded Joints Containing Different Defect Types, Miki, C., Fahimuddin, F., Machida, F. and Nishikawa, K.XIII-1777-99, Economical Effect Of The Improvements Of Fatigue Strength Of Welded Joints On The Performance Of Bridge Structures, Konishi, T. and Miki, C.XIII-1778-99, Stress-Strain Behaviour And Damage Of Structural Steels Under High Strain Repetition Due To Earthquake, Kyuba, H., Miki, C. and Muller, J.XIII-1779-99, Fatigue Properties Of Connection Details Of Steel Pipe Truss Members In The Box Girder, Ono, S., Takenouchi, H., Yanadori, N. and Miki, C.XIII-1780-99, Fatigue Strength Of Out-Of-Plane Gusset Welded Joints Repaired By Bolting-Stop-Hole Method, Mori, T.XIII-1781-99, Hot Spot Stress Determination For Welded Edge Gussets, Niemi, E. and Tanskanen, P.XIII-1783-99, Fatigue Tests On Duplex Stainless Steel Tubular T-Joints, Maddox, S.J. and Manteghi, S.XIII-1784-99, Large Scale Fatigue Testing Of Welded Components, Petershagen, H.XIII-1786-99, Fatigue Behavior Of Stiffened Panel Subjected To Pulsating Load, Matsuoka, K.,Tanaka, Y., Ando, T. and Sakuma, M.XIII-1787-99, Interim Fatigue Design Recommendations For Fillet Welded Joints Under Complex Loading, Maddox, S.J., Razmjoo, G.R. and Sonsino, C.M.XIII-1788-99, On The Capability And Accuracy Of NDT Methods For Detecting Growing Fatigue Cracks, Partanen, T., Niemela, K., Ion, J.C. and Martikainen, J.XIII-1789-99, Relaxation Behavior Of Welding Residual Stresses By Fatigue Loading In Smooth Longitudinal Butt Welding Joints, Takanashi, M., Kamata, K. and Iida, K.XIII-1790-99, Lack Of Penetration Effect On The Stress Profile At The Weld Toe Of Fillet Welds, Barro, G., Labesse-Jied, F., Lieurade, H.P. and Recho, N.XIII-1791-99, Fatigue Cracking Detection By Acoustic Emission On A Welded Box, Huther, I., Rigault, C., Bel, G. and Lieurade, H.P.XIII-1792-99, Travaux En Cours En France Sur La Fatigue Des Joints Soudes 1998-1999 (Work In Progress In France On Fatigue Of Welded Joints), Galtier, A.XIII-1793-99, IIW Commission XIII-4 Annual Report 1999, Lieurade, H.P.XIII-1794-99, Semi-Probabilistic Fatigue Calibration Of The Partial Safety Factors, Maherault, S., Huther, M., Parmentier, G. and Recho, N.XIII-1796-99, IIW Commission XIII, Working Group 3 Annual Report 98-99, Niemi, E.XIII-1797-99, Commission XIII Working Group 1 Annual Report 1998-1999, Huther, M.

Page 246

XIII-1799-99, Work In Progress On Fatigue Strength Of Welded Joints In Japan '99, Iida, K., Miki, C. and Nakamura, S.XIII-1801-99, Software Development For The Fatigue Life Prediction Of Structural Components, de Jesus, A.M.P., Ribeiro, A.S., Porteia, A., de Castro, P.M.T. and Fernandes, A.A.XIII-1802-99, Microstructural Effects On Welded Components Of 6005A Aluminium Alloys, Wante, G., Robin, C., Flahaut, P. and Zakrzewski, D.XIII-1803-00, Commission XIII, Agenda For 2000 Annual Assembly In Florence, Anon.XIII-1804-99, Fatigue Design Procedure For Welded Hollow Section Joints, Zhao, Z.-L. and Packer, J.A.XIII-1807-00, Commission XIII, List Of Documents, Anon.XIII-1812-00, Investigation On Improving Fatigue Properties Of Welded Joints By Ultrasonic Peening Method, Lixing, H., Dongpo, W., Yufeng, Z. and Junmei, C.XIII-1813-00, IIW Commission XIII, Working Group 3 Annual Report 99-00, Niemi, E.XIII-1814-00, Economic Value Of Fabrication Technologies, Scott, B. and Jutla, T.XIII-1819-00, Structural Stress Approach To Fatigue Analysis Of Welded Components -Designer's Guide-, Niemi, E.XIII-1820-00, The Determination Of Hot Spot Stress In Gusset Structures Using A Coarse Element Mesh, Poutiainen, I. and Niemi, E.XIII-1823-00, Improved Recommendations For Fatigue Design Of Pipeline Girth Welds, Maddox, S.J., Macdonald, K.A. and Haagensen, P.J.XIII-1824-00, Case Study Of Titanium Versus Steel Of Flexible Tubular Connection, Horn, A.M. and Lefranc, M.XIII-1826-00, Fatigue Strength Improvement Of Non-Load Carrying Type Fillet Welded Joint By Low Transformation Temperature Welding Wire, Mohri, M., Sakano, K., Kubo, T. and Morikage, Y.XIII-1827-00, Fatigue Strength Improvement Of Welded Joint By Addition Welding With Low Temperature Metallurgical Transformation Electrode, Miki, C. and Anami, K.XIII-1828-00, Performance Of Welded Joint Of Two Type High Strength Steel With Various Toe Treatment Methods, Anami, K. and Miki, C.XIII-1829-00, Low Cycle Fatigue Behaviour Of Butt-Welded Joints With Embedded Defects, Kyuba, H., Fahimuddin, F., Machida, F. and Miki, C.XIII-1830-00, Data Base Of Repair Case For Fatigue Failure On Internet, Miki, C., Goto, K. and Ito, Y.XIII-1831-00, New Type Hybrid Tubular K-Joint For Truss Bridge Girder, Udomworarat, P., Miki, C. and Ichikawa, A.XIII-1832-00, A Study Of The Fatigue Crack Initiation Point In Load-Carrying Type Of Fillet Welded Joints, Mori, T., Kainuma, S. and Ichimiya, M.XIII-1833-00, Effects Of Loading History On Fatigue Crack Initiation Life Of Welded Joint, Matsuoka, K. and Takahashi, I.XIII-1834-00, Work In Progress On Fatigue Strength Of Welded Joints In Japan 2000, Miki, C. and Nakamura, S.XIII-1836-00, A Comparative Study Of The Fatigue Behaviour Of Repaired Joints By Hammer Peening, Infante, V. and Branco, C.M.XIII-1837-00, IIW Meeting, Florence, Italy, 10-15 July 2000. Fatigue Behaviour Of The DuplexStainless Steel 2205, Branco, C.M. and Torcato, R.B.XIII-1838-00, Geometric Dependency Of Fatigue Strength In A Transverse Load-Carrying

Page 247

Cruciform Joint With Partially Penetrating V-Welds, Nykanen, T.J. and Lihavainen, V.-M.XIII-1842-00, Influence Of Surface Roughness On Low Cycle Fatigue, Bayley, C., Scholz, W. and Gregory, J.XIII-1843-00, Experimental Determination Of Fatigue Strength Of Dynamically Loaded WeldedJoints, Anon.XIII-1846-00, IIW Commission XIII-4 Annual Report 2000, Lieurade, H.P.XIII-1847-00, Comparison Between Different Methods To Calculate Geometrical Stress For Welded Cruciform Joints, Alessandri, E., Labesse-Jied, F. and Huther, I.XIII-1848-00, Methodologies For Crack Initiation Or Failure Detection, Huther, I. and Lieurade, H.P.XIII-1849-00, The Fatigue Strength Of Friction Welded Joints, Thouvenel, L. and Lieurade, H.P.XIII-1850-00, Use Of The Local Approach For The Calculation Of The Fatigue Strength Of Welds, Petitpas, E., Lebrun, B., De Meerleer, S., Fournier, P., Charrier, A. and Pollet, F.XIII-1856-00, Commission XIII, Annual Report, Florence 2000, Anon.XIII-1857-00, Commission XIII, Working Programme 2000-2001, Anon.XIII-1858-00, Commission XIII, Minutes For 2000 Annual Assembly In Florence, Anon.XIII-1859-00, Commission XIII, Chairman's Report, Maddox, S.J.XIII-1860-00, Commission XIII, List Of Members Of The Commission, Anon.XIII-1862-01, Commission XIII, Annual Report, Ljubljana, 2001, Anon.XIII-1863-01, Commission XIII, List Of Documents, Anon.XIII-1864-01, Commission XIII, Working Programme 2001-2002, Anon.XIII-1865-01, Commission XIII, Final Agenda For 2001 Annual Assembly In Ljubljana, Anon.XIII-1866-01, Commission XIII, Minutes For 2001 Annual Assembly In Ljubljana, Anon.XIII-1867-01, Commission XIII, Chairman's Report, Maddox, S.J.XIII-1868-01, Commission XIII, List Of Members Of The Commission, Anon.XIII-1869-01, Fatigue Strength Improvement Of Lap Joints Of Thin Steel Plate For Automobile Use By Low Transformation Temperature Welding Wire, Ohta, A., Matsuoka, K., Nguyen, N.T., Maeda, Y. and Suzuki, N.XIII-1870-01, Determination Of Hot Spot Stress In Structural Members With In-Plane Notches Using A Coarse Element Mesh, Fricke, W. and Bogdan, R.XIII-1871-01, IIW Recommendation On Large Scale Fatigue Testing Of Welded Components, Anon.XIII-1872-01, Fatigue Strength Assessment Of Cruciform Joints With Misalignment, Wernicke, R.XIII-1873-01, Commission XIII, Working Group 5. Repair Of Fatigue Loaded Welded Structures. Repair Case Study., Statnikov, E.S.XIII-1874-01, A Parametric Fracture Mechanics Analysis Of Fatigue Of A Single Fillet Welded T-Joint, Nykanen, T., Partanen, T. and Bjork, T.XIII-1875-01, A Parametric Fracture Mechanics Analysis Of Fatigue Of A Fillet Welded Corner Joint, Nykanen, T., Partanen, T. and Bjork, T.XIII-1876-01, Evaluation Of Interaction Equations For Multiaxial Loaded Welded Structures, Backstrom, M. and Marquis, G.XIII-1878-01, The Effect Of Weld Geometry And Loading Conditions On The Fatigue Strength Of Welded Cover Plate Details, Li, X.Y., Partanen, T., Nykanen, T. and Bjork, T.XIII-1879-01, Definition Of The Control Periodicity Of Steel Welded Joints Of Posts Of Ski LiftsFrom Fatigue Cracking Tests, Combe, S., Barjon, Y., Merrien, P., Lieurade, H.P. and Serror,

Page 248

M.XIII-1881-01, Extension Of Fatigue Life By Additional Welds Around Box Welds Using Low Transformation Temperature Welding Material, Ohta, A., Suzuki, N. and Maeda, Y.XIII-1882-01, Variation Of S-N Curves With Stress Ratio, Ohta, A., Suzuki, N. and Maeda, Y.XIII-1883-01, Statistical Evaluation Of Fatigue Crack Propagation Curve Including Fatigue Threshold, Ohta, A. and Suzuki, N.XIII-1884-01, A Study On Fatigue Strength Evaluation Method For Load-Carrying Fillet WeldedCruciform Joints, Mori, T. and Kainuma, S.XIII-1885-01, A Study On U-Shaped Rib Configuration With High Fatigue Resistance, Miki, C. and Sugimoto, M.XIII-1886-01, Cyclic Loading Capacity Of Butt-Welded Joints With Various Matching Conditions, Kyuba, H., Fukuda, Y. and Miki, C.XIII-1887-01, Data Base Of Repair Case For Fatigue Failure On Internet, Miki, C., Goto, K. and Ito, Y.XIII-1888-01, Allowable Defect Size In Welding Joints Of Steel Bridge, Miki, C., Nishikawa, K. and Konishi, T.XIII-1889-01, Work In Progress On Fatigue Strength Of Welded Joints In Japan 2001, Miki, C. and Nakamura, S.XIII-1890-01, Annual Report 2000/2001. IIW Commission XIII, Working Group 5, Miki, C.XIII-1891-01, Thermal Fatigue Experience In French Piping: Influence Of Surface Condition And Weld Local Geometry, Cipiere, M.F. and Le Duff, J.A.XIII-1895-01, IIW Commission XIII, Working Group 3, SG XV-FEA Annual Report 00-01, Niemi, E.XIII-1899-01, Exploratory Investigation Of The Significance Of The Low Stresses In A Fatigue Loaded Spectrum, Gurney, T.R.XIII-1900-01, Hot-Spot Fatigue Data For Welded Steel And Aluminium As A Basis For Design,Maddox, S.J.XIII-1900a-01, Hot-Spot Fatigue Data For Welded Steel And Aluminium As A Basis For Design, Maddox, S.J.XIII-1901-01, Welded Joints In Tubular Structures, Packer, J.A.XIII-1903-01, Methodology To Define S-N Curves In Connection With A Weld Quality, Huther, I., Lam, A., Velluet, L., Royer, Y. and Lieurade, H.P.XIII-1904-01, Fatigue Strength Improvement Solutions For Welded Structures And Components, Lieurade, H.P. and Huther, I.XIII-1908-01, Fatigue Design Method Of Ship Structural Members Based On Fatigue Crack Growth Analysis, Terai, K., Tomita, Y., Hashimoto, K. and Osawa, N.XIII-1917-02, An Investigation on the Influence of Root Defects on the Fatigue Life of the Welded Structure of a Large Two-Stroke Diesel Engine, Hansen, A.V.; Olesen, J. F.; Agerskov, H.XIII-1918-02, Fatigue Stress FEA Round Robin: Soft Toe Gusset on I-Beam Flange, Katajamaki, K.; Lehtonen, M.; Marquis, G.; Mikkola, T.XIII-1921-02, Residual Stress Effect on Fatigue Strength of Non-Load-Carrying Cruciform Welded Joints of SM570Q Steel for Welded Structures, Ohta, A.; Maeda, Y; Suzuki, N.XIII-1925-02, Tensile and Fatigue Strength of a Through-Wall-Electron-Beam-Welded Joint forthe Vacuum Vessel of a Fusion Reactor, Suzuki, T.; Usami, S.; Kimura, T.; Koizumi, K.; Nakahira, M.; Takahashi, H.XIII-1929-02, Mesh-Insensitive Structural Stress Assessment of ASME's FSRF Rules for

Page 249

Vessel and Piping Welds, Dong, P.; Hong, J.K.; Osage, D.; Prager, M.XIII-1930-02, Structural Stress Based Master S-N Curve For Welded Joints, Dong, P.; Hong, J.K.; Cao, Z.XIII-1932-02, 2002 Report of Work in Progress on Fatigue Strength of Welded Joints in Japan,Miki, C.; Nakamura, S.XIII-1938-02, Annual Report of IIW Joint Working Group XIII-XV, Hobbacher, Prof. Dr. A.XIII-1938-03, Annual Report 2003 of IIW Joint Working Group XIII-XV, Hobbacher, Prof. Dr. A.XIII-1947-02, Fatigue Testing of Welded Cruciform Joint With Cold Laps, Martinsson, J.XIII-1965-03, Recommendations for Fatigue Design of Welded Joints and Components, Hobbacher, A.XIII-1978-03, Fatugue Properties of beam-to-column connection details for steel piers, Ono, Shuichi; Tokida, Hideo; Shimozato, Tetsuhiro; Machida, Fumitaka; and Miki, ChitoshiXIII-1981-03, Annual Report of IIW Subcommission XV-E Welded Joints in Tubular Structures,Zhao, Xiao-LingXIII-1985-03, Annual Report 2003 - Commission XIII - WG 3 - Stress Analysis, Wolfgang FrickeXIII-1989-01, Annual Report Of IIW Joint Working Group XIII-XV, July 2001, Hobbacher, A.XIII-1993-03, Equilibrium-Equivalant Structural Stress Approach to Fatigue Analysis of a Tubular Joint, Hiroko Kyuba and Pingsha DongXIII-383-65, Influence Of Loading Frequency And Other Factors On Fatigue Test Results Of Butt Welded Joints, Gyorgyi, F.XIII-425-66, On The Fatigue Strength Of Steels For Ship Structures, Yamaguchi, I., Terada, Y.and Nitta, A.XIII-466-67, On The Relation Between The Nondestructive Testing Information Of Steel WeldsAnd Their Mechanical Strength, Ishii, Y., Kihara, H. and Tada, Y.XIII-486-67, Effect Of Weld Defects On Fatigue Strength. Influence Of Slag Inclusions On The O-Tension Fatigue Strength of 12.5 mm Thick Butt Welds (Series D), Anon.XIII-490-67, Fatigue Test On Transverse Butt Welds Characterized By An Incomplete Root Penetration (Second Series), Guyot, F., Martelee, J. and Soete, W.XIII-492-68, Effects Of Hydrogen On The Fatigue Behaviour Of Mild Steel Bar And Weld Metal, Harrison, J.D. and Smith, G.C.XIII-493-68, About The Remarks Made On Reports XIII 384-65 In Docum. XIII 426-66, XIII 450-67, XII 463-67, XIII 469-67, Serensen, S.V., Trufjakov, V.I. and Koryagin, J.A.XIII-494-68, Fatigue Strength Of Welded Joints In Mild And High-Strength Structural Steels, Friis, L.E. and Steneroth, E.R.XIII-495-68, Metallographic Investigation Of Butt-Welded Steel Specimens Tested In Fatigue, Hultgren, A.XIII-496-68, Variable Stress Cycle Fatigue Of Large Butt-Welded Specimens, Welter, G. and Choquet, J.A.XIII-497-68, Fatigue Strength Of Tubes Butt Welded Using A Ceramic Coated Backing Member, Dawes, M.G.XIII-498-68, Some Cumulative Damage Fatigue Tests On An Al:Zn:Mg Alloy, Harrison, J.D.XIII-499-68, Static And Fatigue Tests On Welded Stainless Steel, Dawes, M.G.XIII-500-68, Further Fatigue Tests Of 11/2 in. Thick Butt Welds Containing Slag Inclusions, Harrison, J.D.XIII-501-68, Some Fatigue Tests On 11/2 in. Thick Butt Welds Containing Continuous Slag Lines, Harrison, J.D. and Gurney, T.R.

Page 250

XIII-504-68, Fatigue Failures In Ship Structures And Their Countermeasures, Yamaguchi, I.XIII-505-68, Etude De Defauts De Soudure Dans Les Constructions Soudees, Anon.XIII-506-68, The Effect Of Weld Defects With Special Reference To BWRA Research, Burdekin, F.M., Harrison, J.D. and Young, J.G.XIII-512-68, Fatigue Tests On Welded AlMg4-Alloy Specimens According To The Locati-Method, Buray-Mihalyi, E.XIII-514-68, The Effect Of Slag Inclusions On The Fatigue Strength Of Machined Butt Welds, Anon.XIII-516-68, Investigation Of Fatigue Strength And Of Sensibility To Cyclical Overloading Of Shipbuilding Steels And Their Welded Joints, Buch, A., Glazur, A. and Switek, W.XIII-518-68, Performance Of Pressure Vessels With Nozzles Under Pulsating Internal Pressure, Wellinger, K. and Sturm, D.XIII-520-68, The Analysis Of Fatigue Test Results For Butt Welds With Lack Of Penetration Defects Using A Fracture Mechanics Approach, Harrison, J.D.XIII-525-68, Documentation Relating To The Statistical Distribution Of Stresses In Sea-Going Vessels, Anon.XIII-529-69, The Effects Of Fabrication Thermal History On The Properties Of Nuclear Vessel Steels, Ando, Y. and Iida, K.XIII-530-69, Fatigue Strength Of Welded Bars Having A Hard Or Interlayer, Satoh, K. and Nagai, A.XIII-531-69, Effect Of External Geometry Of Reinforcement On The Fatigue Strength Of A Welded Joint, Takahashi, K.XIII-532-69, Some Aspects Improving Fatigue Strength Of Butt Welded Joint, Hotta, T., Ishiguro, T., Hanzawa, M. and Yokota, H.XIII-533-69, Low Cycle Fatigue Strength Of Butt Welded Joint With Notch, Yagi, J. and Tomita, Y.XIII-534-69, Strain Cycling Fatigue Of Welds Of Ship Structure Steels, Iida, K., Fukuda, Y. andAndo, Y.XIII-535-69, Variation Of Fatigue Strength At The Toe Of Weld Along Weld Line And Its Effects, Ueda, S.XIII-536-69, Fatigue Strength Of Side Fillet Welded Joint, Ohta, S.XIII-537-69, Fatigue Crack Initiation In Weld Joint Caused By External Compressive Stress - - - Fatigue Tests Of Large Diameter-Short Bend Radius Welding Elbows - - -, Ideguchi, Y., Katori, Y. and Kawahara, M.XIII-538-69, On The Fatigue Crack Propagation Of Structural Steels, Nagai, K-I., Watanabe, M. and Hioki, S.XIII-539-69, Fatigue Strength Of Steel Shafts Built-Up By Welding, Ohuchida, H., Nishioka, A. and Kitamura, I.XIII-540-69, Fatigue Tests On Weldable Steels Carried Out In The Period From 1959 To 1967 At The Materials Laboratory Of The Swedish State Power Board. Survey Of Results, Larsson,B. and Nord, E.XIII-543-69, Facilities For Low Cycle Fatigue Testing In Netherlands, Anon.XIII-545-69, Fatigue Tests In Progress In Japan 1969, Ohtsuka, S.XIII-547-69, Procede De Rechargement Avec Soudure Electrique A L'Arc Submerge Employe En Italie Sur Arbres De Naivres, Tiges De Gouvernail, Etc., Nacher, A.XIII-548-69, Low And Intermediate Cycle Fatigue Strength Of Butt Welds Containing Weld Defects (Interim Report), Ishii, Y. and Iida, K.

Page 251

XIII-549-69, The Static And Dynamic Strength Properties Of Weld Joints Made From Titanium And Titanium Alloys, Bollenrath, F. and Hartmann, W.XIII-552-69, The Influence Of Welding Defects On A Fatigue Resistance Of Joints ConsideringResidual Stressing, Serensen, S.V., Trufiakov, V.I. and Babaev, A.V.XIII-557-69, Service Stresses In Welded Crane Girders In The Hot Strip Mill Of A Steelworks, Anon.XIII-558-69, Secretariat Proposal For Dynamic Force Calibration Of Direct Stress Fatigue Testing Machines, Anon.XIII-559-69, Caracteristiques Spectrales Des Deformations Des Aubes Soudees Des TurbinesHydrauliques, Anikev, G.I., Aronson, A.Ya., Kovalenko, V.A., Yavio, S.N. and Serensen, S.V.XIII-560-69, Low And Intermediate Cycle Fatigue Strength Of Butt Welds Containing Weld Defects, Ishii, Y. and Iida, K.XIII-565-69, Fatigue Tests Of Electroslag Welded Joints, Harrison, J.D.XIII-566-69, An Analysis Of The Fatigue Behaviour Of Cruciform Joints, Harrison, J.D.XIII-569-70, First Intermediate Report Of The Small Working Group On The Planning And Realization Of The Test Program, Anon.XIII-570-70, Fatigue Strength Of Obliquely Crossed Fillet Welded Joint, Takahashi, K., Ito, A., Ishida, M. and Matoba, M.XIII-571-70, Experimental Study On The Fatigue Strength Of Corner Connections In Box Structures. Progress Report No.1. Influences Of The Radius Of Curvature Of The Curved Knee Inner Flange On The Fatigue Strength, Akita, Y., Uchino, K. and Hamanaka, J.XIII-572-70, Fatigue Strength Of Fillet Welded Joints In Container Ships, Okamoto, J., Hirose, M., Umezaki, K. and Matoba, M.XIII-573-70, Experimental Study On The Fatigue Strength Of Welded Tube To Gusset-Joints, Akita, Y., Matsui, A., Uchino, K. and Kamiyama, T.XIII-574-70, Fatigue Strength Of Crane Structure Under Service Load, Taneda, M., Koibuchi, K. and Matsukawa, Y.XIII-575-70, Studies On The Improvement Fatigue Strength Of Butt-Welded Joints Of High-Strength Steels, Kanazawa, S., Ishiguro, T. and Mizui, M.XIII-576-70, Improvement Of Fatigue Strength Of Welded Steel Structure By Rapid Cooling After Hot Galvanizing, Masumoto, I., Iwata, M. and Watanabe, T.XIII-577-70, Fatigue Cracking Of Low Pressure Superheater Tube Of A Steam Raising Unit, Iida, K. and Miyoshi, S.XIII-578-70, Influence Of The Weld Seam Quality On The Fatigue Resistance Under PulsatingInternal Pressure In The Case Of Vessels With Nozzles, Wellinger, E.H.K. and Sturm, D.XIII-579-70, Resistance A La Fatigue En Traction Ondulee De Joints Tubulaires Soudes Bout A Bout, Rinaldi, F. and Pugno, A.XIII-580-70, Fatigue Tests On Aluminium Spot-Welded Joints, Buray-Mihalyi, E. and Buray, Z.XIII-581-70, Effect Des Laitiers Allignes Dans Les Joints Soudes Bout-A-Bout Sur La Resistance A La Fatigue, Robakowski, T.XIII-582-70, L'Influence De Manque De Penetration A La Racine Sur La Resistance A La Fatigue Des Joints, Robakowski, T.XIII-583-70, Metallographic Influences On Fe 52 Carbon Steel Fatigue Strength, Locati, L., Bollani, G. and Massa, A.XIII-584-70, Essais De Fatigue Sur Soudures Bout A Bout Transversales Contenant Des Soufflures, Anon.XIII-586-70, Appareil Pour Essais De Fatigue En Traction Ondulee A La Temperature De

Page 252

L'Azote Liquide, Barrez, G.XIII-587-70, Etude De L'Influence D'Endroits Sur La Tenue A La Fatigue Par Traction OnduleeD'Eprouvettes En Croix Soudees En Angle, Barrez, G. and Leymoine, C.XIII-589-70, The Effect Of Residual Stresses In Estimation Of Fatigue Resistance For Butt Joints With Lack Of Penetration According to The Criteria Of Fracture Mechanics, Serensen, S.V., Trufiakov, V.I. and Babaev, A.V.XIII-591-70, An Analysis Of Data On Non-Propagating Fatigue Cracks On Fracture Mechanics Basis, Harrison, J.D.XIII-592-70, The Effect Of Mean Stress And Material Yield Stress On Fatigue Crack Propagation In Steels, Gurney, T.R.XIII-593-70, Fatigue Tests Of Electroslag Welded Joints, Harrison, J.D.XIII-595-70, Introduction Aux Nouvelles Methodes De Caracterisation A La Fatigue Des AciersDe Construction Metallique, Diez, J.M.XIII-596-70, The Problem Of Reaching International Agreement On The Rational Specification Of Allowable Defect Sizes In Welded Structures, Harrison, J.D.XIII-598-70, Fatigue Tests Of Shipbuilding Steel. Translated From: Part 2: Tests With Notched And Welded Test Pieces Of High Tensile And Ordinary Ship Building Steel. August (1969), Odegard, K. and Hembre, P.XIII-599-70, Calibration Of Testing Machines, Briner, M.J.XIII-606-70, Survey Of Low Cycle Fatigue Equipement And Test Programmes In The United Kingdom, Darlaston, B.J.L.XIII-611-71, Fatigue Resistance Of Large Shafts Built-Up By Welding Owing To Surface Peening, Kudrajavcev, I.V. and Savvina, N.M.XIII-612-71, Variation Of The Positions Where The Welded Joints Of HT 80 Failed In The Fatigue Test, Watanabe, M., Yoshino, Y., Watanabe, I. and Aoki, H.XIII-614-71, Effect Of Low Cycle Fatigue On The Brittle Fracture Initiation Characteristics, Kanazawa, T., Machida, S., Yajima, H. and Aoki, M.XIII-615-71, Elastic And Plastic Stress Distribution On Base Plates In The Neighbourhood Of Fillet Welds In Lap Joints, Horikawa, K. and Okumura, T.XIII-616-71, Some Experimental Studies On Fillet Weld Lap Joint, Okukawa, A., Horikawa, K. and Okumura, T.XIII-617-71, Crack Initiation Life And Micrographic Analysis In Strain Cycling Fatigue, Iida, K.XIII-619-71, Low Cycle Fatigue Behavior Of Spherical Pressure Vesel With Inclined Nozzle, Ohuchida, H., Nishioka, A. and Usami, S.XIII-620-71, Pulsating Torsion Fatigue Test Of Large Size Hollow Shaft Fabricated Of Steel Plate, Saiga, Y., Fukagawa, M., Kamiyama, T. and Ohno, T.XIII-621-71, Low-Cycle Fatigue Strength Of Butt Welded Joints With Angular Distortion, Kuriyama, Y., Saiga, Y., Kamiyama, T. and Ohno, T.XIII-622-71, The Propagation Rate Of Fatigue Crack On Box Girder, Yamaguchi, I.XIII-623-71, The Fatigue Strength Of Fillet Welded Cross Joint, Yamaguchi, I.XIII-624-71, The Basis For A Proposed Acceptance Standard For Weld Defects. Part:1 Porosity, Harrison, J.D.XIII-625-71, Methodes De Depouillement Et D'Interpretation Des Spectres De Charges En Service En Vue D'Essais Simulatifs De Fatigue, Lieurade, H-P. and Rabbe, P.XIII-627-71, Fatigue Strength Behaviour Of A Spot-Welded Structure With Considerations Of Missing Spots, Kubmaul, K.XIII-628-71, Fracture Of A Water Turbine Pressure Pipe Line, Kubmaul, K.

Page 253

XIII-629-71, Crack Propagation In Ultra-High-Strength Steels And Their Welded Joints Under Dynamic Loading, Steffens, H.-D. and Fromm, K.XIII-630-71, Fatigue Strength Of Welded Joints. Some Swedish Results During Recent Years,Friis, L.E., Sperle, J.O. and Wallin, L.XIII-631-71, Continuous Fatigue Crack Growth Measurements Of Flat Specimens, Kubmaul, K. and Betz, U.XIII-632-71, On The Relation Between Strain And Life In Strain - Controlled Low Cycle FatigueOf Steels, Hotta, T., Ishiguro, T., Ishii, N. and Sekiguchi, S.XIII-633-71, Fatigue Of High-Yield-Strength Steel Weldments, Radziminski, J.B. and Lawrence, F.V.XIII-634-71, Statistical Evaluation Of The Design Fatigue Strengths Of Welded Joints, Serensen, S.V., Trufjakov, V.I. and Korjagin, Y.A.XIII-635-71, Low Cycle Fracture Resistance Of Welded Joints Of Low Carbon Steel Depending On Properties Of Weld Zones, Serensen, S.V. and Machutov, N.A.XIII-63-97, Inquiry. Fatigue Testing. Statistical Analysis., AnonXIII-646-72, Fatigue Crack Propagation In Steel Weldments, Lawrence, F.V. and Munse, W.H.XIII-647-72, An Analysis Of Intermediate Cycle Fatigue Strength Of Defective Welded Joints, Ishii, Y. and Iida, K.XIII-648-72, A Statistical Method In The Presentation Of Fatigue Test Results, Uchino, K., Hamanaka, J. and Nakamura, Y.XIII-649-72, Low Temperature Fatigue Behaviour Of 9% Steel Weld Joints, Kunihiro, T., Ando,A., Nagai, A., Ueda, J. and Otsuka, T.XIII-650-72, The Influence Of Explosive Peening On The Fatigue Properties Of Cruciform Weldments In A Maraging Steel, Fortiweld And An Al-Zn Mg Alloy, Chadwick, M.D.XIII-651-72, Papers And Tests On Fatigue Strength Of Welded Joint In Past Year In Japan, Iida, K.XIII-652-72, Fatigue Behavior Of Aluminum Alloy Weldments, Sanders, W.W.XIII-654-72, The Influence Of Thermal Cutting And Its Quality On The Fatigue Strength Of Steel ST-52-3, Goldberg, F.XIII-655-72, A Study On The Fatigue Strength Of Corner Connections In Box Structures. Progress Report No.2: Influences Of The Thickness Of Inner Flange On The Fatigue Strength,Uchino, K., Hamanaka, J. and Sugiyama, S.XIII-656-72, Crack Initiation Life In Low Cycle Fatigue, Iida, K.XIII-657-72, Proposed Amendments To Document XIII-624-71. The Basis For A Proposed Acceptance Standard For Weld Defects. Part1: Porosity, Harrison, J.D.XIII-661-72, The Influence Of Building-Up By Electro-Arc Metal-Spraying On The Fatigue Strength Of Carbon-Steel Shafts. (Interim Report), Thomas, H.XIII-662-72, Tests In Progress On Corrosion Fatigue Of Welded Joints And Structures, Iida, K.XIII-663-72, The Basis For A Proposed Acceptance Standard For Weld Defects. Part 2: Slag Inclusions, Harrison, J.D.XIII-678-73, The Effect Of Internal Weld Defects On The Fatigue Behavior Of Welded Connections, Ekstrom, D.H. and Munse, W.H.XIII-679-73, Fatigue In Boiler Tube Butt Welds. Part II: The Effect Of Defect Severity, Priddle, E.K.XIII-680-73, Fatigue Crack Propagation From Defect In 100 mm Thick Joint, Iida, K. and Fujii, E.XIII-681-73, Section 10. Design Of New Tubular Structures, Anon.

Page 254

XIII-683-73, Fatigue Strength Of 80kg/mm2 High Tensile Strength Steel Plates With Transverse Fillet Welded Attachments, Ohta, S. and Eguchi, Y.XIII-684-73, Fatigue Strength Of High Tensile Structural Steels And Welded Joint, Takahashi, K., Takashima, H., Ito, A. and Yazaki, Y.XIII-685-73, Effect Of Metal Sprays On Corrosion Fatigue Strength Of Welded Joints, Ohuchida, H., Nishioka, A. and Yokota, H.XIII-686-73, Study On Fatigue Strength Of The Straight Type Bracket In Tankers. Revised Edition, Matoba, M.XIII-687-73, Fatigue Strength Of Welded Tubular Joints With Various Stiffeners In Offshore Structures, Matoba, M., Teramoto, S., Kawasaki, T. and Kaminokado, S.XIII-688-73, Corrosion Fatigue Strength Of Welded Joints In 80 kg/mm2 High Strength Steel, Ohuchida, H., Kitamura, I. and Nishimoto, A.XIII-689-73, Corrosion Fatigue Properties Of The Welded Joints In 50 kg/mm and 80 kg/mm2 Class High Tensile Strength Steels, Serizawa, S.XIII-690-73, Experimental Study On The Fatigue Strength Of Welded Tubular K-Joints. 2nd Report Influences Of The Joint Eccentricity On The Fatigue Strength, Uchino, K., Sakurai, H. and Sugiyama, S.XIII-691-73, Fatigue Crack Propagation In Cruciform Joint, Shingai, K. and Imamura, N.XIII-692-73, Fatigue Design Concepts Of Welded Steel Structures, Shiraishi, T.XIII-693-73, Research On Fatigue Strength Of Welded Joints In 1972 In Japan, Iida, K.XIII-694-73, An Elasto-Plastic Fracture Mechanics Approach To Fatigue Crack Propagation And Its Application To The Estimation Of The Fatigue Life Of Transverse Fillet Welded Cruciform Joints, Watanabe, M., Nagai, K-I. and Hioki, S.XIII-695-73, Fatigue Crack Propagation In 9% Ni Steel And Its Welded Joint, Ando, A., Minehisa, S., Nagai, A., Toyosada, M. and Kataza, T.XIII-696-73, A Note On Fatigue Test Results For Porous Weld Specimens Reported In Document XIII-678-73, Anon.XIII-698-73, TIG Dressing For The Improvement Of Fatigue Properties In Welded High Strength Steels, Millington, D.XIII-699-73, Papers Of Ship Research Institute, Iida, K. and Inoue, H.XIII-700-73, Fatigue Design Of Highway Bridges, Kunihiro, T. and Inoue, K.XIII-701-73, The Influence Of Building-Up By The Plasma-Spraying Process On The Fatigue Strength Of Carbon-Steel Shafts, Thomas, H.XIII-702-73, Fatigue Strength Of Field Splices In Ribs Of Orthotropic Decks, Anon.XIII-703-73, Draft. Comments Of The Netherlands On The Draft ISO Proposal For Dynamic Force Calibration Of Axial Load Fatigue Testing Machines By Means Of A Strain Gauge Technique, Anon.XIII-704-73, Fracture Of The Shaft Of A Gear Case, Anon.XIII-705-73, Fracture Of The Shaft Of A Mixing Drum, Anon.XIII-706-73, Application Of 80 kg/mm2 Class High Tensile Strength Steel To Railway Bridge, Tajima, J., Itoh. F., Shima, F., Funakoshi, T. and Ishiwata, M.XIII-707-73, Work In Progress In The United Kingdom, AnonXIII-708-73, IIW Enquiry On Fatigue Failures. Partial Failures Of A Fixed Offshore Platform, Anon.XIII-709-73, IIW Enquiry On Fatigue Failures. Fatigue Cracking In A 35 Ton Container Handler, Anon.XIII-710-73, Comments Of Japan On Document 17 N 1264 - Dynamic Force Calibration Of

Page 255

Axial Load Figure Testing Machines By Means Of A Strain Gauge Technique, Anon.XIII-717-73, IIW Enquiry On Fatigue Failures. Fracture Water Turbine Pressure Pipe Line, Anon.XIII-719-74, Authors' Replies To Questions Raised On Document XIII-684-73 'Fatigue Strength Of High Tensile Structural Steels And Welded Joint' And Document XIII-689-73 'Corrosion Fatigue Properties Of The Welded Joints In 50 kg/mm2 And 80 kg/mm2 Class HighTensile Structural Steels', Anon.XIII-720-74, Fatigue Crack Propagation Data Obtained From Parent Plate, Weld Metal And HAZ In Structural Steels, Maddox, S.J.XIII-721-74, An Analysis Of Fatigue Cracks In Fillet Welded Joints, Maddox, S.J.XIII-722-74, A Fracture Mechanics Analysis Of The Fatigue Behavior Of A Fillet Welded Joint, Maddox, S.J.XIII-724-74, Fatigue Investigation Of Higher Strength Structural Steels In Notched And In Welded Condition -Synthesis Of Results And Tentative Conclusions-, Haibach, E. and Oliver, R.XIII-725-74, Preliminary Experiment On Spot Heat Treatment As A Method For Increasing Fatigue Strength, Masumoto, I., Gudrian-Handl, H. and Akaishi, T.XIII-726-74, Experimental Study On The Fatigue Strength Of Welded Tube To Gusset-Joints. Progress Report No.2, Uchino, K. and Matsui, A.XIII-727-74, Fracture Surface Of Butt Welded Joints Of Structural Steel Tested By Pulsating Fatigue, Nakanishi, S., Kawamura, K., Haze, T. and Sagara, M.XIII-728-74, Fatigue Strength Of HT80 Spiral Casing For Hydraulic Pump-Turbine, Kanazawa, S., Ishiguro, T., Arii, M. and Sugiyama, S.XIII-729-74, Fatigue Crack Propagation In A 304 Stainless Steel, Ishimatsu, M., Kikuchi, M., Itagaki, S., Uchida, T. and Arii, M.XIII-730-74, Fatigue Tests On Hot Dip Galvanised Welded Steel, Larsson, B. and Westerlund, R.XIII-731-74, Author's Reply To The Questions Raised By Dr. Pomey On The Document XIII-686-73 Entitled Study On Fatigue Strength Of The Straight Type Bracket In Tankers, Matoba, M.XIII-732-74, Author's Reply To The Questions Raised By Dr. Bastenaire And Mr. Laier On TheDocument XIII-687-73 Entitled Fatigue Strength Of Welded Tubular Joints With Various Stiffners In Offshore Structures, Matoba, M.XIII-733-74, Authors' Reply To The Question Raised By Mr. Laier On The Document XIII-691-73 Entitled Fatigue Crack Propagation In Cruciform Joints, Shingai, K.XIII-734-74, Fatigue Strength Of Thin-Walled Hybrid Plate Girder, Maeda, Y., Ishiwata, M. andKawai, Y.XIII-735-74, Improvement Of Fatigue Strength In Welded High Tensile Strength Steels, Kanazawa, S., Ishiguro, T., Hanzawa, M. and Yokota, H.XIII-736-74, The Influence Of Building Up On The Fatigue Strength Of Carbon Steel Shafts. Summary Of The Results For The Different Processes, Thomas. H.XIII-737-74, Fatigue Crack Propagation From A Surface Flaw Of 9% Ni Steel And Evaluation Of Significance Of Flaws Based On Fracture Mechanics, Kanazawa, T., Ando, Y., Onozuka, M., Machida, S. and Itoga, K.XIII-738-74, A Proposed Design Basis With Special Reference To Fatigue Crack Propagation, Koshiga, F. and Kawahara, M.XIII-739-74, Biography Of Fatigue Date References Steel Structures, Munse, W.H.

Page 256

XIII-740-74, Fatigue Data Bank And Data Analysis Investigation, Munse, W.H., Radziminski, J.B., Srinivasan, R., Moore, D and Thrasher, C.XIII-741-74, Fatigue Properties And Fracture Toughness Of 9% And 51/2% Nickel Steel, Takashima, H., Yoshimura, H. and Tanaka, K.XIII-742-74, Proposed Amendments To Documents XIII-624-71 And XIII-633-72 To Take Account Of High Tensile Residual Stress, Harrison, J.D.XIII-743-74, The Fatigue Of Stainless Steel Fillet Welds At Low Temperatures, Mathers, E. and Jubb, J.E.M.XIII-744-74, Short Version Of The Technical Report: The Properties Of Flame Cut Edges. February 1974, Thomas, H., de Back, J., Bos, T.J., Muller, T., Nibbering, J.J.W., Verwey, C.J.J.M. and Vonk, R.XIII-745-74, Bending Fatigue Strength Of Welded Steel Pipe With Uniform Mismatch, Iida, K. and Yazaki, Y.XIII-747-74, Exemple D'Exploitation Statistique De Resultats D'Essais De Fatigue Sur Joints Soudes, Bastenaire, F.A.XIII-748-74, Comments Of Working Group 1 About Commission Documents N( 699-73, 634-71, 648-72 And 665-72, Anon.XIII-750-74, Survey Of Literature On The Fatigue Behaviour Of Cruciform Joints, Petershagen,H.XIII-751-74, Notch Effect In Low Cycle Fatigue Of Steels, Iida, K.XIII-752-74, Locati Tests With Welded Aluminium Structural Elements, Buray-Mihalyi, E. and Schmidt, M.XIII-754-74, Brief Introduction Of WES-167-K Procedure For Verification Of High Cycle Fatigue Testing Machine For Materials For Welded Structure In Comparison With ASTM E467-72T, Anon.XIII-759-74, Sur Quelques Problemes Fondementaux A Propos Du Rapport A Re-Analysis Of Fatique Data For Welded Joints In Steel, Serensen, S.V. and Troufiakov, V.I.XIII-760-74, Evaluation Statistique D'Extrapolation Des Resultats Des Resultats Des Essais De Fatigue, Serensen, S.V., Troufiakov, V.O., Cordonsky, Kh.B. and Fridman, J.F.XIII-761-74, Investigation Of Technological Errors In Welded Ship Hulls Assembly Joints, Alferov, V.I. and Matskevich, V.D.XIII-762-74, Fatigue Behavior Of Welded Reinforcement In Reinforced Concrete Beams, Barone, M.R., Cannon, J.P. and Munse, W.H.XIII-763-74, Fatigue Under Variable Amplitude Loading And The Fatigue Limit In The Context Of The Significance Of Defects, Harrison, J.D.XIII-764-75, Work In Progress On The Fatigue Of Welded Structures In The United Kingdom - January 1975, Anon.XIII-765-75, Synthesis Of Cooperative Fatigue Investigations With Notched Plates And Welded Ship Structures Of ST 42 and ST 52, Nibbering, J.J.W., Scholte, H.G. and Van Lint, J.XIII-767-75, Fissuration, En Cours De Transport, D'Un Fond Conique De Resevoir En Acier Intoxydable, Anon.XIII-768-75, Work In Progress On The Fatigue Of Welded Structures In France, Mars 1975, Anon.XIII-769-75, Etude Du Comportement En Fatigue A Programme D'Assemblages Soudes En Croix En Acier E 24 Et E 36 (E 355), Lieurade, H.-P.XIII-770-75, A Statistical Procedure For Re-Analysis Fatigue-Test-Results And For Deriving Design Data, Applied To Welded Joints In AlMg5, Haibach, E. and Atzori, B.

Page 257

XIII-771-75, Influence Of The Conditions In TIG Dressing On Fatigue Strength In Welded HighTensile Strength Steels, Kado, S., Ishiguro, T. Hanzawa, M. and Yokota, H.XIII-772-75, The Improvement Of Fatigue Strength In Welded High Tensile Strength Steels By Additional Weld Run With Coated Electrodes, Kado, S., Ishiguro, T., Hanzawa, M., Yokota, H. and Tanigaki, T.XIII-773-75, The Method Of TIG Dressing, Kado, S., Ishiguro, T., Hanzawa, M. and Yokota, H.XIII-774-75, Fatigue Strength Improvement Of Welded Joints By Plasma Arc Dressing, Kado, S., Ishiguro, T. and Ishii, N.XIII-775-75, Practical Reliability Basis For Structural Fatigue, Ang, A.H-S. and Munse, W.H.XIII-776-75, Laboratory Of Resistance Of Materials At The University Of Ghent, Arnold, S.Y.S.XIII-779-75, Dynamic Behavior And Loadability Of Spot Welded Butt Splice Specimens, Tsuruta, A., Zenri, H., Kishikawa, Z., Takeuchi, N. and Matsushima, F.XIII-780-75, Fatigue Crack Propagation In Welded Structural Steel Plates, Tanaka, M., Narumoto, A. and Funakoshi, T.XIII-781-75, Galvanizing Characteristics Of Steels And Their Weldments: Fatigue Tests On Butt Welds, Gregory, E.N.XIII-782-75, Work In Progress On The Fatigue Strength Of Welded Joints In Japan - June 1975, Iida, K.XIII-788-75, I.I.S. Questionnaire On Work In Progress Concerned With The Fatigue Of Welded Structures, Nacher, A.XIII-789-75, Work In Progress On The Fatigue Of Welded Structures In Norway, Bardal, E., Haagensen, P.J. and Sollie, O.XIII-790-75, Changes In Fatigue Crack Shape During Growth, Iida, K. and Kawahara, M.XIII-791-76, Propagation Under Through-Thickness Stresses Of Fatigue Cracks In Structural Steels With Varying Sulphur Content, Kobayashi, K., Narumoto, A., Funakoshi, T. and Hirai, Y.XIII-792-76, A Statistical Procedure For Re-Analysis Fatigue-Test-Results, Applied To WeldedJoints In Al Zn Mg1, Al Zn4 Mg1 e Al Mg Si, Atzori, B. and Trentadue, A.XIII-793-76, IIW Enquiry On Fatigue Failures. Crack Growth In Highway Bridge Girder, Anon.XIII-794-76, The Properties Of Flame Cut Edges. Final Report October 1975, Thomas, H., de Back, J., Bos, T.J., Muller, T., Nibbering, J.J.W., Verwey, C.J.J.M., Vonk, R. and Zoetemeyer, P.XIII-795-76, Fatigue Strength Of Aluminum Alloy 5083-O Plate And Butt Welded Joints At 10(C and -170(C, Goto, D., Uchino, K. and Uemura, T.XIII-796-76, Galvanizing Characteristics Of Steels And Their Weldments: Fatigue Tests On Butt And Fillet Welds, Gregory, E.N.XIII-797-76, Reliability Analysis On The Fatigue Strength Of Ship Structures, Nitta, A.XIII-798-76, Some Considerations On The Relationship Between The Fatigue Strength Data Obtained Using Scale Models And Test Specimens Of Typical Welded Joints, Matoba, M.XIII-799-76, On The Fatigue Strength Of Slotted Bottom Transverse In Double Bottom Structure In Segregated Ballast Tanker, Matoba, M., Hasegawa, T., Yonesato, T., Inoue, H. and Imamura, N.XIII-800-76, JSSC's Tentative Fatigue Design Guide And Its Comments (Partially Omitted), Shiraishi, T.XIII-802-76, An Expression For Propagation Rate Of Fatigue Crack From A Surface Flaw, Iida,K. and Kawahara, M.XIII-813-77, IIW Inquiry On Fatigue Failures. Crack Growth In Highway Bridge Girder, Anon.XIII-814-77, Frequency Effects In Pulsating Stress Cycling At High Temperature, Watanabe,

Page 258

M. and Ogawa, S.XIII-815-77, Effect Of Misalignment In Welded Joint On Low Cycle Fatigue Strength Of Hemispherical Pressure Vessel Made Of 60kg/mm2 Grade High Tensile Strength Steel, Iida, K., Ochiai, O., Kawai, T., Hirakawa, K., Fujisawa, K. and Okazawa, T.XIII-816-77, Low Cycle Fatigue Strength Of Steels And Welds In Relation To Static Tensile Properties, Iida, K. and Fujii, E.XIII-817-77, The Basis For A Proposed Acceptance Standard For Weld Defects: Part I: Porosity. Part II: Slag Inclusion, Harrison, J.D.XIII-818-77, Influence Of Atmospheric Corrosion On Fatigue Strength Of Steels And Welded Joints, Vladimir, G.XIII-819-77, Weldment Fatigue - A Bibliography Of Cited USA References, Heuschkel, J.XIII-820-77, The Influence Of Stress-Relieving On The Fatigue Of Heavy-Duty Spotwelded Lapjoints, Overbeeke, J.L. and Draisma, J.XIII-821-77, The Fatigue Behaviour Of Heavy-Duty Spotwelded Lapjoints Under Random Loading Conditions, Overbeeke, J.L.XIII-822-77, Work In Progress On The Fatigue Of Welded Structures In The Netherlands, Anon.XIII-823-77, Recommendations For Thermal Cutting In Steel Structures Subjected To Fatigue Loading, Thomas, H. and Goldberg, F.XIII-825-77, Test On Stress Conditions Of Welded Railway Bridges With Orthotropic Plate, Darvas, E.XIII-826-77, Influence Of TIG-Dressing On The Fatigue Strength Of Coverplated Beams, Bergqvist, L. and Sperle, J-O.XIII-827-77, Effect Of Angular Distortion On Fatigue Strength Of Transverse Butt-Welds In High Strength Steels, Iida, K. and Iino, N.XIII-828-77, Improvement In The Fatigue Strength Of Fillet Welded Joint By Use Of The New Welding Electrode, Kobayashi, K., Matsumoto, S., Tanaka, M., Funakoshi, T. and Shinkawa, K.XIII-829-77, Improvement Of Fatigue Strength In Welded High Tensile Strength Steel By Toe Treatment, Hanzawa, M., Yokota, H., Ishiguro, T., Takashima, H., Kado, S., Tanigaki, T. and Hashida, Y.XIII-830-77, Improvement Of Fatigue Strength In Fillet Welded Joint By CO2 Soft Plasma Arc Overlaying On Weld Toe (Interim Report), Shimada, W., Hoshinouchi, S., Hijikata, A., Yoshioka, S. and Inoue, A.XIII-831-77, Fatigue Tests Of Panel Point Structures Of Truss Made Of 80 kg/mm2 High Tensile Strength Steel, Tajima, J., Okukawa, A., Sugizaki, M. and Takenouchi, H.XIII-832-77, Effects Of Crack Length And Stress Ratio On Fatigue Limit Of Mild Steel Plate And Toe Welded Joint, Usami, S. and Kusumoto, S.XIII-833-77, Fatigue Strength At Roots Of Cruciform, Tee And Lap Joints, Usami, S. and Kusumoto, S.XIII-834-77, Japanese Studies On The Fatigue Strength Of Slotted Parts In Ship's Hull Members, Iida, K. and Matoba, M.XIII-835-77, Improvement Of Fatigue Strength Of Fillet Welded Joint For 80 kg/mm2 High Strength Steel, Ikeda, K., Denoh, S., Godai, T. and Ogawa, T.XIII-836-77, Etude Des Caracteristiques De Fatigue De Joints Soudes En Aciers A Haute Resistance, Rabbe, P., Cadiou, L., Amzallag, C. and Dunand-Roux.XIII-837-77, Rupture D'Un Arbre De Broyeur A Marteaux, Anon.

Page 259

XIII-838-77, Rupture Du Bras A Cremaillere D'Un Mecanisme De Basculement Des Lingots, Anon.XIII-839-77, Rupture D'Un Plan De Criblage Pour Agglomeres, Anon.XIII-840-77, Utilisation De La Mecanique De La Rupture Pour Le Calcul De La Resistance A La Fatigue Des Assemblages Soudes. Cas Des Essais Sous Charges Programmes, Lieurade, H.-P.XIII-841-77, Rupture D'Une Brimbale De Vanne Hydraulique, Anon.XIII-842-77, Work In Progress On Fatigue Strength Of Welded Joints In Japan - May 1977, Iida, K.XIII-843-77, IIW Standard Data Record For Fatigue Data Communication, Hobbacher, A.XIII-846-77, IIW Enquiry On Fatigue Failures In Welded Constructions, Anon.XIII-848-77, A Re-Analysis Of Fatigue Data For Butt Welded Specimens Containing Slag Inclusions, Harrison, J.D. and Doherty, J.XIII-849-77, The Influence Of Residual Stress On The Fatigue Strength Of Butt Welded Joints Containing Slag Defects, Boulton, C.F.XIII-850-77, Cumulative Damage Calculations Taking Account Of Low Stresses In The Spectrum, Gurney, T.R.XIII-851-77, Improving The Fatigue Strength Of Fillet Welded Joints By Grinding And Peening,Knight, J.W.XIII-852-77, Corrosion Fatigue Related To Welded Steel Structures - A Literature Survey, Knight, J.W.XIII-853-77, Work In Progress On The Fatigue Of Welded Structures In The United Kingdom - June 1977, Anon.XIII-861-77, The United Kingdom Offshore Steels Research Project, Anon.XIII-862-77, Brief Summary Of Japanese Documents Concerned With Improvement Of Fatigue Strength Of Welded Joints, Iida, K. and Ishiguro, T.XIII-864-78, Power Coal Conveyor Rollers Weld Failures, Anon.XIII-865-78, Final Superheater Header Stub Weld Cracking - In Two Power Stations, Anon.XIII-866-78, Failure Of An Air Heater Shaft, Anon.XIII-867-78, Work In Progress On Fatigue Strength Of Welded Joints In Japan - February 1978, Iida, K.XIII-868-78, Handling Of Fatigue Data In Computer Analysis, Fischer, R. and Wendt, U.XIII-869-78, The Method Of Maximum Likelihood Applied To The Statistical Analysis Of Fatigue Data Including Run-Outs, Spindel, J.E.XIII-870-78, Cumulative Damage In Marine Welded Structures, Haibach, E.XIII-871-78, Comments To IIW Doc. XIII-823-77 Recommendations For Thermal Cutting In Steel Structures Subjected To Fatigue Loading, Iida, K. and Inoue, H.XIII-872-78, Fatigue Strength Of Welded Tubular K-Joints Of 800 N/mm2 Class High Strength Steel, Iida, K., Sakurai, H. and Hayashi, S.XIII-875-78, Effects Of Toe Profile Improvement On Corrosion Fatigue Properties Of Welded Joint, Todoroki, R., Hanzawa, M., Ishiguro, T. and Yanagimoto, S.XIII-876-78, Study On Crack Propagation Under Quasi-Random Loading, Tsunenari, T. and Ono, H.XIII-877-78, Fatigue Life Estimation Of Steel Under Service Load, Nakamura, H., Tsunenari, T., Horikawa, T. and Okada, T.XIII-878-78, Fatigue Life Estimation Of Notched Plate Based On Elasto-Plastic Analysis, Koe, S., Nakamura, H. and Tsunenari, T.

Page 260

XIII-879-78, Influence Of The Weaving Of Weld Line On The Fatigue Strength, Matsumoto, J.,Hashimoto, I., Honda, A. and Morita, T.XIII-880-78, Fatigue Strength Of Invar And Its Fillet Welded Lap Joints, Kishimoto, K., Indow, H. and Isomura, K.XIII-881-78, Improvement Of Fatigue Strength In Fillet Welded Joint By CO2 Soft Plasma Arc Dressing On Weld Toe, Shimada, W., Hoshinouchi, S., Hiramoto, S., Hijikata, A., Yoshioka, S.and Inoue, A.XIII-882-78, An Application Of Neuber's Equation To Fatigue Strength At The Toes Of WeldedJoint, Usami, S., Kimoto, H. and Kusumoto, S.XIII-887-78, Amorcage Et Propagation De Fissures De Fatigue Dans Des Joints D'Assemblages Heterogenes En Aciers Inoxydable Et Faiblement Allie, Amzallag, C., Bernard,J.L. and Bollinger, E.XIII-888-78, Prediction Of Crack Propagation Life In Axial Loading Fatigue Of Structural Steels, Kobayashi, K., Narumoto, A., Tanaka, M., Funakoshi, T. and Ohashi, N.XIII-889-78, Fatigue Crack Propagation In Rotating Shafts, Kikuchi, M., Itagaki, S., Ishimatsu, M., Uchida, T. and Mori, T.XIII-890-78, An Analysis Of Some Fatigue Crack Propagation Data For Steels Subjected To Pulsating Tension Loading, Gurney, T.R.XIII-892-78, Proposed Fatigue Clause For British Standard. Published Document Dealing With Acceptance Levels For Weld Defects, Anon.XIII-896-78, Load Analysis And Service Life Prediction Of An Excavator Boom, Haagensen, P.J. and Pettersen, B.XIII-897-78, Effect Of TIG Dressing On Fatigue Performance And Hardness Of Steel Weldments, Haagensen, P.J.XIII-898-78, Propagation Of Multiple-Ended Fatigue Cracks, Marek, P.XIII-908-78, The Change Of Fatigue Crack Propagation Rate Under The Influence Of ResidualStresses, Trufiakov, V.I., Mikheev, P.P., Kuzmenko, A.Z. and Yakubovsky, V.V.XIII-909-79, Author's Reply To A Question Concerning Document XIII-834-77, Iida, K. and Matoba, M.XIII-910-79, Work In Progress On Fatigue Strength Of Welded Joints In Japan - February 1979, Iida, K.XIII-911-79, The Environment Enhanced Crack Growth Effects In Structural Steels For Water Cooled Nuclear Reactors, Suzuki, M., Takahashi, H., Shoji, T., Kondo, T. and Nakajima, H.XIII-912-79, Investigations On The Fatigue Strength Of Weldable High Strength Steels StE 460 And StE 690 in As-Welded And TIG Dressed Conditions, Minner, H.H. and Seeger, T.XIII-913-79, Bielle D'Accouplement Pour Manipulateur-Culbuteur, Anon.XIII-914-79, Emploi De Toles En Acier A Haute Limite D'Elasticite Dans Les Constructions Soudees Sollicitees En Fatigue, Rabbe, P., Gayot, J.J., Blondeau, R. and Cadiou, L.XIII-915-79, The Development Of Fatigue Cracks From Austenitic Surfaced Deposits At Low Cycle Fatigue, Gregor, V.XIII-916-79, Assessment Of Fatigue Crack Growth From Adjacent Multiple Surface Flaws, XIII-917-79, An Improved Method For Crack Detection And Its Application To Fatigue Crack Initiation Life Of Structural Steels, Kobayashi, K., Matsumoto, S., Tanaka, M. and Ohashi, N.XIII-919-79, Fatigue Strength Of High Strength Steel Beams With Thermally Cut Surfaces, Bergqvist, L. and Sperle, J.-O.XIII-920-79, Travaux En Cours En France Sur La Fatigue Des Joints Soudes - Mai 1979, Anon.

Page 261

XIII-921-79, Determination Des Amplitudes De Contrainte Admissibles En Fatigue Par Ajustement De Courbes De Fiabilite (Revision Du Document XIII-901-78), Bastenaire, F.XIII-922-79, The Properties Of Plasma-Cut Edges, Nibbering, J.J.W., Thomas, H. and Bos, T.J.XIII-927-79, Work In Progress In The United Kingdom On The Fatigue Strength Of Welded Joints, Garwood, S.J.XIII-929-79, Fatigue Failure Of A Screw Conveyor Shaft, Hobbacher, A.XIII-933-79, IIW Enquiry Of Fatigue Failures In Welded Constructions. Failure Of Sleeper Tie On Travelling Derrick Crane, Hutchings, F.R.XIII-939-80, Fatigue Strength Of Welded Connections In Round Bar Steel Structures, Agerskov, H. and Bjornbak-Hansen, J.XIII-940-80, Work In Progress On Fatigue Strength Of Welded Joints In Japan - February 1980, Iida, K.XIII-941-80, Derivation Of Design Rules For Pressure Vessels, Harrison, J.D. and Maddox, S.J.XIII-942-80, The Effect Of Incomplete Root Penetration On The Low Cycle Fatigue Behaviour Of T-Butt Welds, Fujimoto, M. and Izumi, M.XIII-943-80, An Investigation Of Resistance To Elasto-Plastic Cyclic Deformation And FractureOf Various Weld Zones In Structural Steels, Melnikov, N.P. and Larionov, V.V.XIII-944-80, Data Sheets On Fatigue Properties Of Butt Welded Joints Of SM58Q Rolled SteelFor Welded Structure - Effect Of Specimen Size -, Anon.XIII-945-80, Data Sheets On Fatigue Properties Of Butt Welded Joints Of High Strength Steels (Class 800N/mm2) For Welded Structure - Effect Of Specimen Size -, Anon.XIII-946-80, Data Sheets On Fatigue Properties Of Non-Load-Carrying Cruciform Welded Joints Of SM50B Rolled Steel For Welded Structure -Effect Of Specimen Size-, Anon.XIII-949-80, Fatigue Strength Of Welded Pad Plates, Matoba, M. and Oshikiri, A.XIII-950-80, Evaluation Of Fatigue Strength Of Hold Frame Ends In Ship Hulls, Iida, K. and Matoba, M.XIII-951-80, Fatigue Strength Of Welded Beams Of High Strength Steels. Interim Report, Minner, H.H. and Seeger, T.XIII-953-80, Catalogue Of S-N-Curves Of Welded Joints In Structural Steels -Introduction And Examples For Its Usage-, Olivier, R. and Ritter, W.XIII-955-80, Influence Of Undercut on The Fatigue Strength Of Submerged Arc Welded Fillet Connections, Petershagen, H.XIII-956-80, Rotors Mecanosoudes Pour Alternateurs De Navire, Anon.XIII-957-80, Arbre De Tete Pour Pompe Centrifuge A Axe Vertical, Anon.XIII-959-80, Lessons From Service Fatigue Failures, Harrison, J.D.XIII-960-80, Tentative Proposal For First Draft Of Chapter On Fatigue, Anon.XIII-961-80, Travaux En Cours En France Sur La Fatigue Des Joints Soudes -Mai 1980, Anon.XIII-962-80, Corps De Chambre A Bulles, Anon.XIII-963-80, Fatigue Strength Of Welded Joints Under Variable Amplitude Loading, Sperle, J.-O.XIII-964-80, Determination Of The Danger Of Spontaneous Fatigue Failures Of Welded Tubular Joints, Kobrin, M.XIII-965-80, Fatigue Failure Of A Screw Conveyor Shaft, Hobbacher, A.XIII-966-80, Work In Progress On Fatigue Strength Of Welded Structures In The Federal Republic Of Germany -June 1980-, Olivier, R.

Page 262

XIII-967-80, Aspect Ratio Expressions For Part-Through Fatigue Crack, Iida, K.XIII-968-80, Influences Of Metallurgical Factors On The Fatigue Characteristics Of The Seam Welds In Electric Resistance Welded Steel Pipes, Kobayashi, K., Tanaka, M. and Hirano, Y.XIII-969-80, Investigations Of Weld-Imperfections In Butt-Welds Of Structural Hollow Sections (SHS), Mang, F., Steidl, G. and Bucak, O.XIII-972-80, Effect Of Misalignment On Fatigue Strength Of Transverse Butt Welded Joints, Wylde, J.G. and Maddox, S.J.XIII-973-80, An Investigation Of The Influence Of Applied Stress Ratio On Fatigue Crack Propagation In Structural Steels, Maddox, S.J., Gurney, T.R., Mummer, A.M. and Booth, G.S.XIII-975-80, Some Considerations Of Environment And Joint Geometry In The Fatigue Assessment Of Offshore Steel Structures, Wylde, J.G. and Booth, G.S.XIII-981-80, Work In Progress On Fatigue Strength Of Welded Structures In Norway, Haagensen, J.XIII-982-80, Some Remarks Prepared On Request Of Prof. Ir. A.A. Van Douwen, To Be Presented To Commission XIII En XV of IIW, Berkelder, A.G.J.XIII-983-80, Investigation On The Fatigue Strength Of Welded Joints By Full Scale Tests, Berger, P.XIII-984-80, Hull Damages - Further Investigation And Significance Of Weld Defects, Kjellander, S.L. and Persson, B.-G.XIII-986-81, Effect Of Residual Tensile Stresses On Threshold Level For Fatigue Crack Propagation In Welded Joints Of SM50B Steel, Ohta, A., Sasaki, E., Kamakura, M., Nihei, M., Kosuge, M., Kanao, M. and Inagaki, M.XIII-987-81, Data Sheets On Fatigue Properties For Load-Carrying Cruciform Welded Joints Of SM50B Rolled Steel For Welded Structure -Effect Of Specimen Size-, Anon.XIII-988-81, Data Sheets On Fatigue Properties For Butt Welded Joints Of High Strength Steel(Class 800N/mm2) For Welded Structure -Effect Of Welding Procedure-, Anon.XIII-989-81, Data Sheets On Fatigue Properties For Non-Load-Carrying Cruciform Welded Joints Of SM50B Rolled Steel For Welded Structure -Effect Of Welding Procedure-, Anon.XIII-990-81, Data Sheets On Fatigue Crack Propagation Properties For Butt Welded Joints Of SM50B Rolled Steel For Welded Structure - Effect Of Welding Procedure -, Anon.XIII-991-81, Fatigue Strength Of Partially Penetrated Longitudinal Butt Welds Of 800MPa Steel, Miki, C., Tajima, J., Asama, T., Asahi, K. and Takenouchi, H.XIII-992-81, Influence Of Blowhole On Fatigue Strength Of Partially-Penetrated Longitudinal-Bead Welded Joint, Miki, C., Nishino, F., Nishimura, T., Hirabayashi, Y., Satoh, M. and Yoshida, K.XIII-993-81, Statistical Analysis On Fatigue Strength Of Arc-Welded Joints Using Covered Electrodes Under Various Welding Conditions With Particular Attention To Toe Sharpe, Nihei, M., Sasaki, E., Kanao, M. and Inagaki, M.XIII-994-81, Effects Of Specimen Configurations And Test Frequency On Fatigue Strength, Inagaki, M., Nihei, M., Kamakura, M., Sasaki, E. and Kanao, M.XIII-995-81, Method Of Repeated Tension Fatigue Testing For Fusion Welded Joints - Revised JIS Z 3103, Anon.XIII-996-81, Work In Progress On Fatigue Strength Of Welded Joints In Japan - March 1981, Iida, K.XIII-997-81, S-N Scatter Band Of Welded Joints In Structural Steels At High Number Of Cycles, Olivier, R. and Ritter, W.XIII-998-81, Design Recommendations For Cyclic Loaded Welded Steel Structures,

Page 263

Hobbacher, A.XIII-WG2-2-90, Peening Methods For Improvement Of Fatigue Strength, Smith, F.C., Dubois, V. and Bremen, U.XIII-WG2-38-95, Commission XIII, Working Group 2 Improvement Techniques. Minutes Of Meeting In Trondheim, Norway, 9 March, 1995, Anon.XIII-X/XIII/XV-RSDP-89-03, Residual Stresses and Distortions in Welded Structures: What We Know Today and Beyond, P. DongXII-J-13-72, Filler Materials And Properties Of Electroslag Weld Metal /Questionaire/, Zeke, J.XII-J-14-72, Mechanical Properties Of Electroslag Welded Joints On 11 483, 13 123 and X Steel Types, Ehrenstein, E.XII-J-21-72, Fracture Toughness Of Electroslag Welded Joints On 11 483, 13 123 And Steel Types, Muncner, L.XII-J-22-72, Classification Of Filler Materials For Electroslag Welding - Interim Report, Shackleton, D.N.XII-J-27-73, To The Question Of Suitable Wire/Flux Combination Choice For ES Welding, Zeke, J. and Riecansky, I.XII-J-29-73, Correction To Classification Of Filler Materials For Electroslag Welding - Interim Report Doc IIW-XII-J-22-72, Shackleton, D.N.XII-J-32-73, The Classification Of Electroslag Welding Consumables, Shackleton, D.N. and Hanford, N.J.XII-J-33-73, Influence Of The Cross-Sectional Area Of Consumable Nozzle On Welding Phenomena In Consumable Nozzle Electroslag Welding, Nakata, S., Sakabata, N. and Mouko, M.XII-J-34-73, Properties Of The Weld Metal Produced By The Electro-Slag Process, Tachimoto,K., Naiki, T., Tanioka, S. and Murayama, T.XII-J-35-73, To The Suitability Of Steels And Consumables To Electroslag Welding Not Applying Normalizing Heat Treatment Of Welded Joints, Zeke, J.XII-J-3-70, Metallurgical Processes During Electroslag Melting, Zeke, J.XII-J-40-74, To The Choice Of Steels For Electroslag Welding, Muncner, L., Ehrenstein, E., Zeke, J. and Bosansky, J.XII-J-41-74, Proposal For Classification Of Filler Materials For Electroslag Welding. /Wire Electrodes, Fluxes, Their Symbolisation And Classification Of Wire - Flux Combination/ PART I /Symbolisation And Technical Requirements/, Anon.XII-J-43-75, Research Developments In Electroslag And Electroslag Welding, Shackleton, D.N., Shaheeb, A.R., Dhooge, A., Hart, P.H.M. and Dolby, R.E.XII-J-44-75, Proposal For Classification Of Filler Materials For Electroslag Welding /Wire Electrodes, Fluxes, Their Symbolisation And Classification Of Wire - Flux Combination/ PART I /Symbolisation And Technical Requirements/, Zeke, J.XII-J-45-75, Proposal For Classification Of Filler Materials For Electroslag Welding /Wire Electrodes, Fluxes, Their Symbolisation And Classification Of Wire - Flux Combination/ PART II /Classification Of Wire/Flux Combination/, Anon.XII-J-50-76, Electroslag Welding Of Heavy Section 21/4Cr-1Mo Steels, Okumura, M., Kumagai, M., Nakamura, H. and Kohira, K.XII-J-51-76, Properties Of Large - Sized Austenitic Stainless Steel Piping Manufactured By Weld Forming Process, Kihara, H., Ando, Y., Ujiie, A., Sato, S., Matsumoto, O. and Hamanaka, A.XII-J-54-76, Survey On The Application Of Electroslag Welds In The As-Welded Stress

Page 264

Relieved Condition, Zeke, J.XII-J-60-77, A Study On Notch Toughness Of Consumable Nozzle Type Electro-Slag Weld Metals With Flux-Cored Wires, Kohira, K., Otani, K. and Soneda, S.XII-J-65-78, Consumables For Electroslag Welding C-Mn Steels, Shackleton, D.N.XII-J-76-80, Use Of Metal Powder Addiction To Improve The Strength And Toughness Of HighSpeed Electroslag And Electrogas Welds In Micro-Alloyed And Low Alloy Steels, Eichhorn, F., Hirsch, P. and Wubbels, B.XII-J-7-71, Properties Of Base And Filler Materials Used For Search For The Methodics Of Electroslag Welded Joints Testing, Ehrenstein, E.XIIk-24-72, Automatic Control Of Arc Welding By Monitoring Molten Pool, Arata, Y. and Inoue, K.XIIk-25-72, An Optical Sensor For Adaptive Control Of The Welding Arc, Mishler, H.W. and Monroe, R.E.XIIk-27-72, Present Status Of Research And Development Concerning With Automatic ControlOf Welding In Japan, Arata, Y.XIIk-50-74, Automatic Control Of Arc Welding (Report III) -Theoretical Consideration Of The Kinetics Of Heat Processing By Travelling Heat Source-, Arata, Y. and Inoue, K.XIIk-58-75, Status Of Technology Concerning In-Process Control And Monitoring Of Welding, Jackson, C.E.XIIk-77-76, List Of XIIk Documents, Anon.XIIk-78-76, Members Of Working Group XIIk, Anon.XIIk-83-76, AGENDA And Chairman's Report. Copenhagen, Denmark 3 To 9 July 1977, Jackson, C.E.XIIk-99-79, Automatic Positional Control Of Welding Torch For Arc Welding, Sudil, J., Misik, B.and Barborka, J.XIV-369-76, Guide To AWS Welding Inspector Qualification And Certification, Anon.XIV-385-78, Welding Technicians - New Approaches To Education In The U.K., Gourd, L.M.XIV-422-82, Annex E 1. 1. Examination And Testing, Anon.XIV-451-84, Annex G1. Job - Knowledge (Draft), Anon.XIV-454-84, Typical Test Questions For Job-Knowledge Testing, Anon.XIV-460-84, Chairman - Report, Jacobi, M.XIV-461-85, Commission XIV Minutes. Interim-Meeting-London. London, 3rd January 1985, Anon.XIV-468-85, Annual Assembly 1985 Strasbourg. 1 September To 6 September. AGENDA - Commission XIV., Jacobi, M.XIV-471-85, Chairman-Report. Annual Statement 1984. IIW-Commission XIV, Jacobi, M.XIV-474-85, Commission XIV-Documents, Anon.XIV-476-86, Some Remarks To The IIW - Media - Competition For Welding - Instruction, Jacobi, M.XIV-477-86, Comments To The German Guide To Welding, Anon.XIV-482-86, Agenda (Draft). Tokyo - Annual - Assembly - 1986, Jacobi, M.XIV-483-86, Certification Of Welding Engineers. Draft For ISO - Standard, Jacobi, M.XIV-484-86, Japanese Organizing Committee. Annual Assembly 1986., Anon.XIV-488-86, Acceptance Level For The Application Of Aluminium Welders, Anon.XIV-490-86, Chairman-Report ANNUAL STATEMENT 1986. IIW Commission XIV, Jacobi, M.XIV-492-87, Agenda. Commission XIV Annual-Assembly-Sofia. 4. - 7. July 1987, Apps, R.L.XIV-494-87, Establishment Of National And International Schemes For Certification Of

Page 265

Welding Engineers, Anon.XIV-495-87, New Terms Of Reference Of Commission XIV (Due To The Bye-Laws Of IIW), Anon.XIV-500-87, Spanish Post-Graduate Courses For Engineers, Fernandez, J.XIV-501-87, Chairman - Report. Annual Statement 1987. IIW- Commission- XIV, Jacobi, M.XIV-502-88, Annex B / JOB-Knowledge / Steel, Anon.XIV-503-88, Annex B / JOB Knowledge / Aluminium, Anon.XIV-504-88, Approval Of Personnel Engaged In The Inspection Of Welded Joints (Excluding NDT Operations) Version 2. Draft For Discussion, Gourd, L.L.XIV-505-88, Agenda - Vienna 1988, Jacobi, M.XIV-506-88, Welding For Engineers And Supervisors, Long, R.E.XIV-507-88, The Role Of Simulators In Weldor Training, Edmonds, D.P. and Enderle, G.W.XIV-508-88, Some Remarks To Recent Developments In the Field Of Instruction (By Demonstration Of Welding Instruction), Jacobi, M.XIV-511-88, Guide - Line For Working Out : How And How Much To Teach?, Anon.XIV-513-88, CCT - Diagram (Draft), Anon.XIV-514-88, An Example Of Computer Assisted Learning, Gourd, L.M.XIV-515-88, Welding Skills Training System. Introduction To Pipe Welding With Backing, Long, R.E.XIV-516-88, Commission XIV, Proposal For A Project On Macrography, Gourd, L.M.XIV-518-88, South African Bureau Of Standards Recommended Practice For The Application Of SABS 0157: Part I Or II Within The Structural Steel Industry, Anon.XIV-519-88, Chairman Report Annual Statement 1988. IIW Commission XIV, Jacobi, M.XIV-520-88, Certification Of Welding Inspectors, Hayward, P.XIV-520-89, MINUTES. Budapest, May 1989_Sub-Commission XIV-A, Jacobi, M.XIV-521-89, Agenda Commission XIV. Annual Assembly Helsinki / Finnland. September 5 - 8, 1989, Anon.XIV-522-89, Minutes. Sub-Commission XIV-B. April 4, 1989. Washington, D.C., Long, R.E.XIV-525-89, Approval Of Personnel Engaged With Inspection Of Welded Joints, Gourd, L.E.XIV-526-89, Text Of Resolution No.3, Anon.XIV-527-89, Text Of Resolution No. 4, Anon.XIV-528-89, Minutes Of Meeting, Jacobi, M.XIV-529-89, Text Of Resolution No. 5, Anon.XIV-530-89, Test Of Resolution No. 6, Anon.XIV-531-89, Annual Report Of Commission XIV. Helsinki Annual Assembly 1989, Jacobi, M.XIV-542-90, A Recommended Practice For The Approval Of Personnel Employed In The Supervision Of Welding, Anon.XIV-593-94, I. Message: USA Position On WG 13 Proposal (Dated: April 18, 94). II. Short Summarizing Answer From Dr. Ralph E. Long/USA (Dated From May 9, 1994), Long, R.E.XIV-594-94, Access Conditions And Transition Arrangements For An IIW Education, Examination And Qualification Scheme For Welding Personnel Based On The EWF Model, Jessop, T.J.XIV-747-01, Proposed modifications for some subsections in IWE curriculum for the design of welded structures, Farkas, J.; Jarmai, K.XIV-90-58, Formation Du Technicien En Soudure, Clack, V.W.XIV-A-102-82, Research Of Educational Methods And Forms For Welder In The Welding Research Institute Bratislava,

Page 266

XIV-A-104-83, Certification For Welders Approval, XIV-A-105-83, Branch Connection, XIV-A-117-85, Report Of The IIW-Observer For Select Committee Standardization And IIW Commission XIV On The Meeting Of An Editorial Group Of ISO TC 44 SC 11 In Bratislava/CSSR On June 11-13, 1985, XIV-A-122-89, Proposal For A New International Standard, XIV-A-123-89, Minimum Requirements For The Education Of Welding Engineers In The EC - Countries:, XIV-A-124-89, Proposal For A New International Standard Approval Of Personnel Employed InThe Supervision Of Welding, XIV-A-125-89, Proposal For A New International Standard Approval Of Personnel Employed InThe Supervision Of Welding, XIV-A-126-89, Draft For CEN Standard Qualification And Certification Of Welding Inspectors, XIV-A-127-89, 70th Annual American Welding Society Convention And Welding Show. April 2- 7, 1989, XIV-A-128-89, Guidelines For The Standardization Work Of The IIW, In Accordance With The Procedure Described In Resolution 19/1984 Of The ISO Council, XIV-A-138-90, Welding Technology Training For Engineers From Developing Countries In Japan, XIV-A-72-89, Weldability - Part 1. CCT - Diagram Of Weldment. Questionnaire, Anon.XIV-A-86-79, Questionnaire To Compare Welder Training Techniques In The Member Countries, Haverty, M.XIV-A-94-80, Performance Objectives For A Welder At The International Level, Anon.XIV-A-95-80, Taxonomy Of Welding Objectives (Cognitive), Anon.XIV-B-133-90, Steam Fitter/Welder Training Program For Nuclear And Conventional Generating Plants, Long, R.E.XIV-B-32-82, Education And Training Of Inspectors Of Welded Joints, Anon.XIV-B-42-82, QUESTIONNAIRE /Education In Welding On Engineering Level/, Rozanic, I., Becker, L., Konig, R. and Lezzi, P.XIV-B-43-82, Job Analysis - Welding Engineer, Anon.XIV-B-44-84, Moduleplan And Short Description Of Welding Engineer Education, Anon.XIV-B-45-84, Standard For Qualification And Certification Of Welding Engineers, Anon.XIV-B-46-84, Test For Qualification Of Welding Engineer (Ordinary), Anon.XIV-B-48-84, Certificate Of Competency As A Qualified Welding Technician, Anon.XIV-B-52-85, The Welding Engineer - Education In Denmark, Al-Erhayem, A.K. and Grum-Schwensen, P.XIV-B-53-85, Welding Engineer Knowledge (Basic - Document), Jacobi, M.XIV-B-54-85, Welding - Engineer - Education (Annex .: A). Postgraduated Course, Anon.XIV-B-55-85, Welding - Engineer - Education (Annex.: B). -Integrated Course-, Anon.XIV-B-56-85, Welding Inspector Training Programme, Anon.XIV-B-58-85, Schaeffler's - Diagramme, Anon.XIV-B-59-85, Draft: General Objectives For Welding Inspectors On Two Levels., Jacobi, M.XIV-B-69-90, Colloquium On Welding Education And Training Sponsored By Commission XIV Of IIW At Montreal Canada, Anon.XIV-B-74-89, Colloquium On Welding Education And Training Sponsored By Commission XIV Of IIW At Montreal Canada, Anon.XIV-B-75-89, Guide For The Visual Inspection Welds, Anon.

Page 267

XIV-B-82-90, Status Report Of AWS Training Resources, Oates, W.R.XIV-B-83-90, An Overview Of The Certified Welding Inspector Program, Grubbs, D.R.XIV-B-91-91, Guidelines For The Training And/Or Qualification Of Welding Personnel, Papritan, J.C. and Helzer, S.C.X-K-114-87, A Simple Qualification Test For The Acceptability Of Defects, Soete, W.M.J.XV-1001-98, Commission XV, Minutes Of The Annual Assembly, Hamburg-September 1998, Hobbacher, A.XV-1010-99, Commission XV, Annual Report 1998-99, Hobbacher, A.XV-1011-99, Annual Report Of IIW Subcommission XV-E, Packer, A.XV-1015-99, Annual Report Of IIW Joint Working Group XIII-XV, Hobbacher, A.XV-1016-99, Commission XV, List Of Documents 1999 (State 990501), Hobbacher, A.XV-1017-99, Commission XV, Provisional Agenda For The Annual Assembly In Lisbon, Portugal (Sunday, 18 - Saturday, 24 July 1999), Hobbacher, A.XV-1018-99, Commission XV, Final Agenda For The Annual Assembly In Lisbon, Portugal (Sunday, 18 - Saturday, 24 July 1999), Hobbacher, A.XV-1019-99, Commission XV, Minutes Of The Annual Assembly, Lisbon, Portugal - 21-23 July1999, Hobbacher, A.XV-1020-99, Commission XV, Working Programme (State 4.99), Hobbacher, A.XV-1021-99, Recommended Fatigue Design Procedure For Welded Hollow Section Joints. PART 2: Commentary (Second Editions), Anon.XV-1022-99, IIW Commission XV, Address List, State March 1999, Anon.XV-1023-99, First Awarding Of The GUERRERA Medal In The Year 2000, Hobbacher, A.XV-1027-99, Hot Spot Stress Determination For Welded Edge Gussets, Niemi, E. and Tanskanen, P.XV-1028-99, On The Capability And Accuracy Of NDT Methods For Detecting Growing Fatigue Cracks, Partanen, T., Niemela, K., Lon, J.C. and Martikainen, J.XV-1029-99, Fatigue Tests On Duplex Stainless Steel Tubular T-Joints, Maddox, S.J. and Manteghi, S.XV-1030-99, Interim Fatigue Design Recommendations For Fillet Welded Joints Under Complex Loading, Maddox, S.J., Razmjoo, G.R. and Sonsino, C.M.XV-1035-99, Fatigue Design Procedure For Welded Hollow Joints, Zhao, X.-L. and Packer, J.A.XV-1037-99, Commission XV, Annual Report 1999, Hobbacher, A.XV-1047-00, IIW Commission XV, SG-FEM, Annual Report 99-00, Niemi, E.XV-1049-00, Commission XV, List Of Documents 2000 (State 2000.05.15), Hobbacher, A.XV-1051-00, Commission XV, Final Agenda For The Annual Assembly In Florence, Italy (Sunday, 9 - Friday, 14 July 2000), Hobbacher, A.XV-1052-00, Commission XV, Minutes Of The Annual Assembly, Florence, Italy - 10-12 July 2000, Hobbacher, A.XV-1053-00, Commission XV, Address List (State April 2000), Anon.XV-1056-00, Grout Reinforcement Of Tubular Members Part-I Column Compression Tests, Etterdal, B., Mork, M., Gladso, R., Haukaas, M. and Lefranc, M.XV-1060-00, Static Strength Of Stainless Steel Transverse Joints, Huhtala, L. and Partanen, T.XV-1066-00, Commission XV, Annual Report 2000, Hobbacher, A.XV-1068-01, Determination Of Structural Stress For Fatigue Assessment Of Welded Aluminium Ship Details, Tveiten, B.W. and Moan, T.

Page 268

XV-1069-01, Commission XV, List Of Documents 2001 (State 2001.06.00), Hobbacher, A.XV-1070-01, Cyclic Testing Of Beam-To-Column Connections With Weld Defects And Assessment Of Safety Of Numerically Modeled Connections From Brittle Fracture, Azuma, K.XV-1071-01, Commission XV, Address List (State June 2001), Anon.XV-1073-01, Commission XV, Final Agenda For The Annual Assembly In Ljubljana, Slovenia (Sunday, 8 - Friday, 13 July 2001), Hobbacher, A.XV-1075-01, Annual Report of IIW Subcommission XV-E on Welded Joints in Tubular Structures, Packer, J. A.XV-1075-01, Annual Report Of IIW Subcommission XV-E, Packer, A.XV-1078-01, Annual Report of IIW Joint Working Group XIII-XV, Hobbacher, Prof. Dr. A.XV-1080-01, Annual Report of IIW Working Group XV-9 on Fabrication and Economical Aspects in the Design of Welded Structures and Details, Jarmai, K.XV-1083-01, Fundamentals of Design and Fabrication for Welding (Minutes of the Meetings atthe Annual Assembly in Ljubljana, Slovenia, 9-11 July 2001, Hobbacher, Prof. Dr. A.XV-1084-02, Fundamentals of Design and Fabrication for Welding (Annual Report 2001-2002), Hobbacher, Prof. Dr. A.XV-1085-01, Minimum cost design of welded tubular frames for a special truck, Jarmai, K.; Farkas, J.; Visser-Uys, P.XV-1086-01, Minimum cost design of a truck floor welded from aluminum-alloy profiles, Farkas, J.; Jarmai, K.; Dul, R.XV-1087-01, Definition Of The Control Periodicity Of Steel Welded Joints Of Posts Of Ski Lifts From Fatigue Cracking Tests, Combe, S., Barjon, Y., Merrien, P., Lieurade, H.P. and Serror, M.XV-1089-01, A Mesh-Insensitive Structural Stress Procedure for Fatigue Evaluation of WeldedStructures, Dong, P.; Hong, J.K.; Cao, Z.XV-1091-01, Fatigue Design Method Of Ship Structural Members Based On Fatigue Crack Growth Analysis, Terai, K., Tomita, Y., Hashimoto, K. and Osawa, N.XV-1095-01, Economy of a High Power Welding Technology, Jarmai, K.; Farkas, J.; Marko, P.XV-1100-02, Thickness Design of Axially Compressed Unstiffened Cylindrical Shells with Circumferential Welds, Farkas, J.XV-1102-02, IIW Recommendations for Assessment of Risk of Fracture in Seismically Affected Moment Connections (A Report Prepared by the Joint Working Group of Commissions X and XV), XV-1103-02, Estimation of Deformation Capacity Applying Linear Fracture Mechanics, Shimokawa, H.; Nakagomi, T.; Okamoto, H.; Morita, K.XV-1104-02, Study on Design of High Strength Steel Structures, Koutarou, I.; Yasumasa, Dr. N.; Izumi, Dr. I.XV-1107-02, Fundamentals of Design and Fabrication for Welding Final Agenda, Hobbacher, Prof. Dr. A.XV-1109-02, Fundamentals of Design and Fabrication for Welding List of Documents 2002, Hobbacher, Prof. Dr. A.XV-1111-02, Annual Report of Sub-Commission XV-G; Fundamentals of Seismic Design and Fabrication of Welded Structures, Davies, G.XV-1113-02, Annual Report of IIW Joint Working Group XIII-XV, Hobbacher, Prof. Dr. A.XV-1114-02, Fabrication and Economical Aspects in the Design of Welded Structures and Details to IIW Commission XV, Jarmai, K.XV-1116-02, Annual Report of Study Group - Repair of Welded Components (IIW-IIS

Page 269

Commission XV - Fundamentals of Design for Fabrication and Welding), Shaw, R. E.XV-1118-02, Mesh-Insensitive Structural Stress Assessment of ASME's FSRF Rules for Vessel and Piping Welds, Dong, P.; Hong, J.K.; Osage, D.; Prager, M.XV-1119-02, Structural Stress Based Master S-N Curve For Welded Joints, Dong, P.; Hong, J.K.; Cao, Z.XV-1120-02, Annual Report of IIW Subcommission XV-A on Analysis of Statically Loaded Welded Components to IIW Commission XV, Gresnigt, N.XV-1120-02, Annual Report of IIW Subcommission XV-A on Analysis of Statically Loaded Welded Components, Gresnigt, N.XV-1125-02, Fatigue Stress FEA Round Robin: Soft Toe Gusset on I-Beam Flange, Katajamaki, K.; Lehtonen, M.; Marquis, G.; Mikkola, T.XV-1126-02, Minutes of the Commission XV Meetings at the IIW Annual Assembly in Copenhagen 26-29 June 2003, Hobbacher, A.XV-1127-03, Recommendations for Fatigue Design of Welded Joints and Components, Hobbacher, A.XV-1128-03, Design, Analysis and Fabrication of Welded Structures - Annual Report 2002-2003, Hobbacher, Prof. Dr. AXV-1132-03, Annual Report of Subcommission XV-A on Analysis of Statically Loaded Welded Components, Gresnigt, NolXV-1133-03, Annual Report of IIW Subcomission XV-E Welded Joints in Tubular STructures, Zhao, Xiao-LingXV-1136-03, Annual Report 2003 of IIW Joint Working Group XIII-XV, Hobbacher, Prof. Dr. AXV-1137-03, Fabrication and Economical Aspects in the Design of Welded Structures and Details - Annual Report of IIW Working Group XV-9, Jarmai, KarolyXV-1139-03, Annual Report of Working Group 11 - Repair of Welded Components, Shaw, RobertXV-1143-03, An IIW Compendium for Residual STress Distributions: Pipe and Vessel Girth Welds, Dong, P.XV-1144-03, Optimum design of a belt-conveyor bridge constructed as a welded ring-stiffened cylindrical sheel, Farkas, J., Jarmai, K., Virag, Z.XV-1144-03, Optimum Design of a Belt-Conveyor Bridge Constructed as a Welded Ring-Stiffened Cylindrical Shell, Farkas, J.; Jarmai, K.; Virag, Z.XV-1145-03, Optimum Design and Cost Calculation of a Simple Frame with Welded or Bolted Corner Joints, Jarmai, Farkas, and UysXV-1150-03, Full-scale testing of beam-to-column connections with partial joint penetration groove welded joints, Azuma, Kurobane, Dale, MakinoXV-1151-03, Finite Element Calculation and Assessment of Static Stresses in Load-Carrying Fillet Welds, Fricke, Mertens, WeissenbornXV-242-68, International Test Series. Final Report, Ligtenberg, F.K.XV-292-68, Deformation And Stress Due To Welding Of Typical Welded Joints In Steel Building, Matsushita, F., Nakayama, H., Matsumoto, M. and Inagaki, M.XV-317-71, Design Of Welded Parts In Aluminium Alloys, Anon.XV-385-76, Ultimate Strength Formulae For Simple Tubular Joints, Kurobane, Y., Makino, Y. and Mitsui, Y.XV-386-76, Investigation Into The Static Strength Of Welded Warren And Pratt Type Joints OfRectangular Hollow Sections, Wardenier, J., de Koning, C.H.M. and van Douwen, A.A.XV-388-76, Limitations For Fillet-Welded T-Joints With Gaps Loaded In Compression, Feder,

Page 270

D.K.XV-401-77, Behaviour Of Axially Loaded K- And N-Type Gap Joints With Bracings Of Structural Hollow Sections And An I-Profile As Chord, Wardenier, J., de Koning, C.H.M. and van Douwen, A.A.XV-402-77, Behaviour Of Axially Loaded K- And N-Type Gap Joints With Bracings Of Rectangular Hollow Sections And A Channel Profile As Chord, Wardenier, J., de Koning, C.H.M. and de Back, J.XV-403-77, Bibliography Of Welded Joints In Structural Hollow Sections, Wardenier, J. and Verheul, A.XV-404-77, A Description Of The UK Offshore Steels Research Project, For The Presentation Of The Objectives And Current Progress, Anon.XV-405-77, A Review Of American Criteria For Tubular Structures - And Proposed Revisions, Marshall, P.W.XV-406-77, Permissible Weld Defects - Static Loading, Anon.XV-420-78, The Strength Of Large Structural Elements As Influenced By Lamellar Tearing, Granstrom, A.XV-421-78, Design Rules For Predominant Statically Loaded Welded Joints With Hollow Section Bracings And An I- Or H- Section As Chord, Wardenier, J. and Mouty, J.XV-426-80, The Interpretation Of Test Results For A Level-I Code, Strating, J.XV-436-79, Design Rules For Predominantly Statically Loaded Welded Joints In Circular Hollow Sections, Wardenier, J.XV-439-79, Recommended Practice For Testing The Strength Of Fillet Welds In Structural Steels And Aluminium Alloys, Anon.XV-440-79, Proposal For Increasing The Ultimate Load Of Butt-Welded Joints In Aluminium Alloys, Werner, G.XV-444-79, Investigations Of Weld-Imperfections In Butt-Welds Of Structural Hollow Sections (SHS), Mang, F., Steidl, G. and Bucak, O.XV-445-79, Ultimate Load Of T-Joints Of Rectangular Hollow Sections For ( = 1, Hlavacek, V.XV-446-79, Calculation Of Excentrically Loaded Fillet Welds, Faltus, F.XV-459-80, The Static Strength Of R.R.-Joints With Large b/B-Ratio, Kato, B. and Nishiyama, I.XV-460-80, Additional Tests On Tubular K-Joints -With CHS Members Under Static Loads-, Kurobane, Y., Makino, Y., Honda, T. and Mitsui, Y.XV-461-80, Re-Analysis Of Ultimate Strength Data For Truss Connections In Circular Hollow Sections, Kurobane, Y., Makino, Y. and Mitsui, Y.XV-463-80, Design Of Welded Lattice Joints And Moment Resisting Knee Joints Made Of Hollow Sections, Mang, F., Bucak, O. and Steidl, G.XV-464-80, Tentative Proposal For First Draft Of Chapter On Fatigue (For Information And Eventual Discussion), Anon.XV-467-80, Deformation Curves Of Fillet Welds, Anon.XV-470-80, Revision Du Document IIS/IIW-398-72 Recommendations Concernant Les Structures Soudees En Aluminium Et Alliages Al-Mg, Anon.XV-487-81, Design Of CHS X And T-Joints Under Tensile Brace Loading, Makino, Y., Kurobane, Y. and Minoda, Y.XV-488-81, New Developments And Practices In Tubular Joint Design, Kurobane, Y.XV-490-81, Bibliography Of Welded Joints In Hollow Sections, Wardenier, J.XV-491-81, Design Recommendations For Hollow Section Joints -Predominantly Statically

Page 271

Loaded-, Anon.XV-492-81, The Strength Of Predominantly Statically Loaded Joints With A Square Or Rectangular Hollow Section Chord, Wardenier, J. and Davies, G.XV-493-81, The Fatigue Behaviour Of Lattice Girder Joints In Square Hollow Sections, Wardenier, J. and Dutta, D.XV-494-81, Design Recommendations For Cyclic Loaded Welded Steel Structures, Anon.XV-500-81, Note On The Evaluation Of Partial Safety Factors For Unknown Or Partially Known Shape Of The Limit State Function, Skov, K. and Rackwitz, R.XV-511-82, Steel In Marine Structures. Summary Of Papers, Anon.XV-512-82, (Paper Taken From: International Conference, Paris, France, 5-8 October 1981.) Strength Of Tubular Joints, de Back, J.XV-513-82, Research In Japan In The Stability Of Circular Tubes, Kurobane, Y., Atsuta, T. and Toma, S.XV-514-82, Experience-Based, Fitness-For-Purpose Ultrasonic Reject Criteria For Tubular Structures, Marshall, P.W.XV-517-82, Load And Resistance Factor Design, Galambos, T.V.XV-518-82, Safety Considerations For The Fatigue Assessment According To Eurocode 3 (Steel Structures), Sedlacek, G.XV-519-82, Structural Steelwork Into The '80s, Anon.XV-521-82, Permissible Weld Discontinuities - Static Loading, van Douwen, A.A., de Back, J., Gresnigt, A.M. and Kuperus, A.XV-524-82, Failure Analysis And Repair Of Welded Girders: A Case Study, Levine, P.XV-533-82, Introduction To Probabilistic Design Methods, Hansen, B.XV-534-82, Load And Resistance Factor Design (LRFD) For Steel Structures In The U.S. --State Of Developments, Feder, D.XV-537-83, The Effect Of Gap Size On Static Strength Of K-Joints In Rectangular Hollow Section Trusses -A Modified Yield Line Approach, Niemi, E.XV-538-83, Investigation Into The Static Strength Of Welded T Moment Unreinforced Joints InRectangular Hollow Sections, Szlendak, J. and Brodka, J.XV-539-83, Investigation Into The Static Strength Of Welded K-Type Joints In Rectangular Hollow Sections, Zyoinski, J., Czechowski, A. and Brodka, J.XV-540-83, Evaluation Of Bending Fatigue Life For Fillet Welded Joints And Application To Fatigue Analysis Of Tubular Joints, Mitsui, Y. and Kurobane, Y.XV-544-83, Prevention Of Lamellar Tearing Cracking In Welded Steel Fabrication, Anon.XV-55-57, Recommended Joint Preparations For Fusion Welding Of Steel, Anon.XV-560-84, Fatigue Behaviour Of Steel Offshore Structures - Program For Approach, Madhava Rao, A.G., Ramachandra Murthy, D.S. and Raghava, G.XV-561-84, Basis For Design Of Unstiffened Tubular Joints Under Axial Brace Loading, Ochi, K., Makino, Y. and Kurobane, Y.XV-562-84, Investigation Into The Static Behaviour And Strength Of Lattice Girders Made Of RHS, Czechowski, A., Gasparski, T., Zycinski, J. and Brodka, J.XV-563-84, The Local Strength Of Welded RHS T-Joints Subjected To Bending Movement, Tabuchi, M., Kanatani, H. and Kamba, T.XV-565-84, Plate To I-Beam Connections, Wardenier, J.XV-571-84, Introduction To The Proposed AISC Load And Resistance Factor Design Specification, Haaijer, G.XV-572-84, Annual Report Commission XV 1983/84, Anon.

Page 272

XV-574-85, IIW/IIS Commission XV List Of Documents 1985, Anon.XV-575-85, Agenda For The Annual Assembly 1985 In Strasbourg, Anon.XV-577-85, Annual Report Of Subcie XV-E. Design Of Welded Tubular Structures, Wardenier, J.XV-578-85, Annual Report Of IIW Joint Working Group XIII-XV For 1985, Hobbacher, A.XV-580-85, Low Temperature Tensile Strength Characteristics Of Reinforcing Bars And Their Gas Pressure Welded Joints, Yabe, Y., Fujimori, T., Nakagomi, T. and Fujimoto, M.XV-581-85, Studies On Repair Welding In Japan, Horikawa, K. and Suzuki, H.XV-582-85, Recommended Fatigue Design Procedure For Hollow Section Joints, Anon.XV-583-85, Behaviour Of IIW Recommended Test Specimens For Fillet Welds, Pham, L.XV-584-85, Canadian Implementation Of CIDECT Monograph No.6, Packer, J.A., Birkemoe, P.C. and Tucker, W.J.XV-585-85, The Effect Of Residual Stresses On The Buckling Loads Of Columns, Plates, and Shells Made Of Steel, Bornscheuer, F.W.XV-586-85, Quality Assurance Of Welded Joints And Acceptance Levels For Weld Defects, Feder, D.XV-587-85, Synopsis Of Comm. XIII Documents 1984 Of Possible Interest To Members Of Comm. XV, Feder, D.XV-588-85, Minutes Of The Annual Assembly. Strasbourg - September 1985, Anon.XV-592-85, Recommendations For Repairs And/Or Strengthening Of Steel Structures By Welding. Draft, Biskup, J.T.XV-594-85, IIW-Commission XV List Of Members, Anon.XV-595-85, Annual Report Commission XV 1984/85, Feder, D.XV-596-86, Commission XV, List Of Documents 1985/1986, Anon.XV-597-86, Commission XV, Agenda For The Annual Assembly 1986 In Tokio, Anon.XV-598-86, Annual Report Of Subcommission XV-A Analysis And Calculation Of Welded Joints, Anon.XV-599-86, Annual Report Of IIW Joint Working Group XIII-XV For 1986, Hobbacher, A.XV-604-86, Note On The I.I.W. International Conference On Automation And Robotization In Welding And Allied Process, Girardi, U. and Konkoly, T.XV-615-86, Recent Research In Kumamoto University In Tubular Joint Design, Makino, Y. andKurobane, Y.XV-621-86, Fundamentals Of Design And Fabrication For Welding Annual Report 1985/1986, Costa, G.XV-624-87, The Application Of An Engineering Critical Assessment In Design, Fabrication AndInspection To Assess The Fitness For Purpose Of Welded Products. Draft Proposal For ISO Standard, Anon.XV-625-87, Annual Report Of Subcommission XV-A, Anon.XV-626-87, The Effect Of Welding Residual Stresses On The Buckling Loads Of Columns, Plates And Shells Made Of Steel, Bornscheuer, W.XV-627-87, Annual Report Of Subcie XV-E Design Of Welded Tubular Structures, Wardenier, J.XV-628-87, A Welding Engineering Example In Faulty Detail And It's Effective Improvement, Zeng, L.XV-629-87, Experiences In The Application Of Edge Preparation By Permanent Backing Strip In Single-Grooved Thick Plate Butt Joint On Site Welding By Semi-Automatic Welding Process, Zeng, L.

Page 273

XV-630-87, A Typical Repair Welding Technique For The All Welded Heat-Treatable High-Strength Steel Heavy Cylinder Bodies With Penetrated Fatigue Cracks, Zeng, L.XV-631-87, Essantial Viewpoints In Weld Detail And Failures Analysis On The Crane Runway Girders In The Steel Mills Erected In China, Zeng, L.XV-637-87, Fatigue Design Of Welded Tubular Connections, Garf, E.F. and Evdokimov, V.V.XV-644-87, Weldment Design For Hollow Section Joints, Packer, J.A. and Frater, G.S.XV-645-87, Note For The Technical Committee On Past And Future Activities Of The Commission, Costa, G.XV-646-87, Commission XV, List Of Documents 1986/1987, Anon.XV-647-87, Commission XV, Agenda For Annual Assembly 1987 In Sofia, Anon.XV-648-87, Recommendations For Repairs And/Or Strengthening Of Steel Structures, Anon.XV-660-88, Errata Corrige To The Doc. XV-658-87, Anon.XV-661-88, Limit Analysis Of A Weld, Jensen, A.P.XV-666-88, Annual Report Of Subcommission XV-A, Feder, D.XV-669-88, Annual Report Of Subcie XV-E, Wardenier, J.XV-671-88, Simplified Design Charts For Axially Loaded Joints Of Circular Hollow Sections, Reusink, J.H. and Wardenier, J.XV-672-88, Draft ISO Standard. Fusion Welding. Recommended Joint Preparations For Steels, Costa, G.XV-674-88, Draft Proposal On Recommended Joint Preparation For Fusion Welding Of Mild Steel And Low Alloy Steels, Takemi, K. and Horikawa, K.XV-675-88, Commission XV, Agenda For Annual Assembly 1988 In Vienna, Anon.XV-676-88, Commission XV List Of Documents (State: 880630), Anon.XV-682-88, Application Data Sheet Form, Anon.XV-691-88, Commission XV, Proces-Verbal De L'Assemblee Annuelle. Vienna - Juillet 1988, Costa, G.XV-691-88-E, Commission XV, Minutes Of The Annual Assembly. Vienna - July 1988, Costa, G.XV-692-88, Commission XV, List Of Members (State: 880901), Anon.XV-693-88, Commission XV, List Of Documents (State: 880901), Anon.XV-694-88, Commission XV, Annual Report 1987/1988, Costa, G.XV-695-89, IIW Subcommission XV-A Annual Report 1988/89, Feder, D.XV-696-89, Tests On Fillet Weld Joints With High Strength Steel Specimens, Niemi, E.XV-698-89, Welding Under Load. Draft - June 1989, Hunersen, G., Hansch, H. and Augustyn,J.XV-700-89, Annual Report Of Subcie XV-E, Wardenier, J.XV-701-89, Design Recommendations For Hollow Section Joints, Wardenier, J.XV-703-89, Commission XV, Agenda For The Annual Assembly In Helsinki, Anon.XV-704-89, Commission XV, List Of Members Of Commission XV (State 890630), Anon.XV-705-89, Commission XV, List Of Documents (State 890630), Anon.XV-709-89, The Repair And Strengthening By Welding In The Steel Structure Failure From Extrinsic Factors, Zeng, L.XV-711-89, Revision Of Reference Terms For Commission XV, Costa, G.XV-712-89, Note Concerning The Future Organisation Of Annual Assemblies, Anon.XV-714-89, Welding Calculation In Eurocode 3, Gresnigt, A.M.XV-717-89, Design For Robotic Welding Of Steel Bridge, Horikawa, K.XV-722-89, Commission XV, Minutes Of The Annual Assembly. Helsinki - September 1989,

Page 274

Costa, G.XV-723-89, Commission XV, List Of Members (State: 890930), Anon.XV-724-89, Commission XV, Fundamentals Of Design And Fabrication For Welding Annual Report 1988/1989, Costa, G.XV-725-90, Fabrication Aspects In The Optimum Design Of Welded Structures, Farkas, J.XV-726-89, The Engineering Application Of The 'FAD' From Pellini's NDT Fracture-Safe Design Theory And Its Correction, Zeng, L., Zhung-Ching, L. and Hung-Da, W.XV-727-90, Commission XV, Provisional Agenda For The Annual Assembly In Montreal (Monday 23rd July - 27th July 1990), Anon.XV-728-90, Rationalization Of Steel Structure Welding For Buildings In Japan -Mechanical Behaviors Of Beam-To-Column Welded Joints Without Beam Scallops-, Yabe, Y., Nakagomi, T. and Sakamoto, S.XV-729-90, Annual Report Of Subcie XV-E, Design Of Welded Tubular Structures, Wardenier,J.XV-730-90, State Of The Art Of Tubular Joint Research In China, Bozhen, C.XV-733-90, On Stress Concentrations In Welded Components, Niemi, E.XV-734-90, Crane Runways. IIW Commission XV Design And Fabrication, Biskup, J.T.XV-737-90, Commission XV, Final Agenda For The Annual Assembly In Montreal (Monday 23rd July - Friday 27th July 1990), Anon.XV-738-90, Recommended Joint Preparation For Steels, Horikawa, K.XV-739-90, Commission XV, List Of Documents (State 900530), Anon.XV-743-90, Fatigue Strength Of Welded Connections Of Tubular Structures Under Complex Loading, Garf, E.F. and Lisnichenko, E.N.XV-751-90, Commission XV, Minutes Of The Annual Assembly, Montreal - July 1990, Costa, G.XV-752-90, Commission XV, List Of Documents (State 900831), Anon.XV-753-90, Commission XV, List Of Members (State : 900831), Anon.XV-754-90, Commission XV, Annual Report - 1989-1990, Costa, G.XV-755-91, Cost Comparisons Of Plates Stiffened On One Side And Cellular Plates, Farkas, J.XV-758-91, Annual Report Of Subcie XV-E., Wardenier, J.XV-759-91, Structural Behavior Of Beam-To-Column Connections Using Electric Furnace Steel Plates, Nakagomi, T., Yokoyama, S., Yabe, Y., Sakamoto, S. and Fujita, T.XV-761-91, Annual Report Of Joint Working Group XIII-XV (1991), Hobbacher, A.XV-762-91, Strength And Deformation Capacity Of Fillet Welds In Fe E 460, Gresnigt, A.M.XV-780-91, Commission XV, Minutes Of The Annual Assembly. The Hague - July 1991, Costa, G.XV-781-91, Commission XV, List Of Documents (State 910831), Costa, G.XV-782-91, Commission XV, List Of Members (State 910831), Costa, G.XV-783-91, Commission XV, Annual Report - 1990-1991, Costa, G.XV-784-92, Structural Behaviors Of H-Shaped Steel Beams At Beam-To-Column Welded Connections Using High Tensile Strength Steel Plate HT590 With Low Yield Ratio, Sakamoto, S. and Yabe, Y.XV-785-92, Commission XV, Provisional Agenda For The Annual Assembly In Madrid (Wednesday, 9th September - Friday, 11th September 1992), Anon.XV-786-92, IIW Subcommission XV-A Annual Report 1991/1992, Feder, D.XV-787-92, Limit Analysis Of A Planar Welded Joint Subjected To A Torque, Jensen, A.P.

Page 275

XV-798-92, Commission XV, Final Agenda For The Annual Assembly In Madrid (Wednesday, 9th September - Friday, 11th September 1992), Anon.XV-801-92, Annual Report Of Subcommission XV-E, Packer, J.A.XV-821-93, IIW Subcommission XV-A Annual Report 1992/93, Feder, D.XV-822-93, Recommendations For The Design Of Long Fillet Welds, Feder, D.K.XV-823-93, Fabrication Cost Calculations Of Welded Structural Parts, Farkas, J. and Jarmai, K.XV-824-93, Structural Behavior Of Steel Columns With Partial-Penetration Welded Joints, Yabe, Y., Sakamoto, S. and Yakushiji, K.XV-827-93, Welded Connections - Part 2: Steel Structures (Final Draft), AnonXV-829-93, Commission XV, Final Agenda For The Annual Assembly In Glasgow (Monday, 30th August - Friday, 3rd September 1993), Anon.XV-837-93, Commission XV, Minutes Of The Annual Assembly. Glasgow - September 1993, Costa, G.XV-838-93, Commission XV, List Of Documents (State 930930), Anon.XV-839-93, Commission XV, List Of Members (State 930930), Anon.XV-840-93, Commission XV, Annual Report - 1992-1993, Costa, G.XV-842-94, Commission XV, Provisional Agenda For The Annual Assembly In Beijing (Monday, 5 September - Thursday, 8 September 1994), Costa, G.XV-845-94, Recommendations On Fatigue Of Welded Components, Hobbacher, A.XV-848-94, Study Of Relieving Welding Residual Stresses In Large Penstocks Of HydropowerStation By Local Explosion Treatment, Shichang, Z., Liangshan, C., Xiuzhong, D., Huaining, C. and Yanyan, W.XV-849-94, Strength And Deformation Of Joints With Front Fillet Welds, Kruppa, M. and Koch,T.XV-852-94, Annual Report Of Joint Working Group XIII-XV For 1994, Hobbacher, A.XV-853-94, Boundary Condition Effects On The Behaviour Of Isolated Partial Overlap RHS K Joints, Davies, G. and Crockett, P.XV-854-94, Commission XV, List Of Documents (State 940731), Anon.XV-855-94, Commission XV, Final Agenda For The Annual Assembly In Beijing (September 1994), Costa, G.XV-867-94, Commission XV, Report On Activities Of CEN/TC 121/SC 4/WG 6: Catalogue Of Joint Design Including Preparation, Costa, G.XV-868-94, Report On The Re-Organization Of The Works Of Commission XV, Costa, G.XV-869-94, Annual Report Of Subcommission XV-E, Packer, J.A.XV-870-94, Commission XV, Minutes Of The Annual Assembly. Beijing - September 1994, Costa, G.XV-872-95, Commission XV, Annual Report - 1993-1994, Costa, G.XV-874-95, Commission XV, List Of Documents (State 950131), Anon.XV-875-95, Commission XV, List Of Members (State 950131), Anon.XV-876-95, Commission XV, Provisional Agenda For The Annual Assembly In Stockholm (Monday, 13 June - Friday, 16 June 1995), Anon.XV-882-95, Study On Application Of HT780 High Strength Steel Plate To Structural Member Of Super High-Rise Building (Part.1 Development Of High Strength Steel With Heavy Gauge And Welding Process), Mochizuki, H., Yamashita, T., Kanaya, K. and Fukasawa, T.XV-885-95, Commission XV, Final Agenda For The Annual Assembly In Stockholm (June 1995), Anon.

Page 276

XV-887-95, Commission XV, List Of Documents (State 950531), Anon.XV-899-95, Commission XV, Minutes Of The Annual Assembly. Stockholm - June 1995, Costa, G.XV-900-95, Commission XV, List Of Members (State 950930), Anon.XV-901-95, Commission XV, List Of Documents (State 950930), Anon.XV-903-96, Optimum Design Of Welded Aluminium Structural Parts With Fatigue Constraints, Farkas, J. and Jarmai, K.XV-905-96, Sub-Commission XV-F Annual Report 1995 - 1996, Horikawa, K.XV-907-96, Application Of Robot Welding On-Site For A Beam-Column Joint, Sugata, M. and Umekuni, A.XV-908-96, Inspection And Repairing Methodologies On Cranes In Steel Manufacturing Plants, Timossi, L. and Servetto, C.XV-922-96, Fatigue Strength Of Longitudinal Non-Load-Carrying Welded Joints, Huther, I., Lieurade, H.P., Sayhi, N. and Buisson, R.XV-923-96, Fatigue Design Of Cope Hole Details In Steel Bridges, Miki, C. and Tateishi, K.XV-925-96, Commission XV, Final Agenda For The Annual Assembly In Budapest (September1996), Anon.XV-926-96, Commission XV, List Of Members (State 960630), Anon.XV-927-96, Commission XV, List Of Documents (State 960630), Anon.XV-931-96, Basic Philosophy Of The New IIW Recommendations On Fatigue Design Of Welded Joints And Components, Hobbacher, A.XV-934-96, Commission XV, Minutes Of The Annual Assembly. Budapest - September 1996, Anon.XV-935-96, Commission XV, Annual Report - 1995-1996, Costa, G.XV-936-96, Commission XV, List Of Members (State 960930), Anon.XV-937-96, Commission XV, List Of Documents (State 960930), Anon.XV-938-97, Commission XV, Provisional Agenda For The Annual Assembly In San Francisco USA (Wednesday, 16 - Friday, 18 July 1997), Hobbacher, A.XV-939-97, Annual Report Of IIW Subcommission XV-E, Packer, J.A.XV-940-97, Sub-Commission XV-F Annual Report 1996-1997, Anon.XV-941-97, Commission XV, Minutes Of San Francisco Meeting, Campbell, H.H.XV-942-97, Annual Report Of IIW Joint Working Group XIII-XV, Hobbacher, A.XV-944-97, Analysis Of Some Methods For Reducing Residual Beam Curvatures Due To Weld Shrinkage, Farkas, J. and Jarmai, K.XV-945-97, The Benefits Of Seismic Energy Reduction, Caspe, M.XV-946-97, Brittle Fracture In Steel Building Frames - Comparative Study Of The Northridge And Kobe Earthquakes, Kurobane, Y., Azuma, K. and Ogawa, K.XV-949-97, The Strength Of Welded T-DT Joints In Rectangular And Circular Hollow Section Under Variable Axial Loads, Davies, G. and Crockett, P.XV-950-97, Object-Orientated Fabrication Cost Model For The Economic Appraisal Of TubularTruss Design, Tizani, W.M.K., Nethercot, D.A., Davies, G., Smith, N.J. and McCarthy, T.J.XV-952-97, Development Of 200 mm-Thick HT980 Steel Plate And Its Application Study To Penstock Bifurcation, Kametani, H., Okada, H., Murayama, H., Arimochi, K., Onishi, K. and Horikawa, K.XV-954-97, Designing For Near - Source Earthquakes, de Pineres, O.G.XV-955-97, The Influence Of Low Service Temperature And Plate Thickness On The Fatigue Behaviour Of Structural Details, Kalna, K.

Page 277

XV-957-97, The Brittle Fracture Of The Beam-To-Column Connection In Consideration Of TheMechanical Property Of The Structural Steel And The Weld Metal, Nakagomi, T., Fujimoto, M.,Aoki, H., Nishizawa, J. and Ohbayashi, I.XV-958-97, Effect Of The Repeating Of The Strain Rate, The Axial Force, The Plastic Strain On The Fracture Of Beam-To-Column Welded Connection, Nakagomi, T., Minami, S., Ichikawa, Y., Ohbayashi, I., Oka, M. and Lee, K.XV-959-97, Study On The Details Of Beam To Column Welded Connection To Exert On The Earthquake Resistance Capacity Of Steel Structures, Nakagomi, T., Yabe, Y., Fujita, T., Ohbayashi, I., Sasaki, Y. and Lee, K.XV-960-97, Panel Zone Yielding As A Precursor Of Brittle Fracture Of Welded Connection In Special Moment Resisting Frames, Mohr, W.C.XV-961-97, Commission XV, Final Agenda For The Annual Assembly In San Francisco USA (Wednesday, 16 - Friday, 18 July 1997), Hobbacher, A.XV-962-97, Commission XV, Address List Of The Commission (State 970515), Hobbacher, A.XV-963-97, Commission XV, List Of Documents (State 971105), Hobbacher, A.XV-970-98, Commission XV, Minutes Of The Annual Assembly, San Francisco - July 1997, Hobbacher, A.XV-972-98, Commission XV, List Of Documents 1998 (State 980722), Hobbacher, A.XV-974-98, Annual Report Of IIW Subcommission XV-E, Packer, A.XV-977-98, Annual Report Of IIW Joint Working Group XIII-XV, Hobbacher, A.XV-979-98, Commission XV Annual Report 1996-1997, Hobbacher, A.XV-984-98, Fatigue Performance Of Large Girth Welded Steel Tubes, Maddox, S.J. and Razmjoo, G.R.XV-989-98, Commission XV Final Agenda For The Annual Assembly In Hamburg, Germany (Sunday, 13 - Wednesday, 16 September 1998), Hobbacher, A.XV-991-98, Fatigue Assessment Of Ship Structure Details, Huther, M., Beghin, D., Parmentier,G. and Maherault, S.XV-993-98, Commission XV, List Of Documents 1998 (State 980802), Hobbacher, A.XV-994-98, Commission XV, Address List Of The Commission, Hobbacher, A.XV-995-98, Evaluation Of Importance Factors Influencing Deformation Capacity Of Steel Moment Connections, Kurobane, Y.XV-A-18-2003, Update on Design Rules for Fillet Welds, Gresnigt, A.M.XV-E-03-277, Welded Joints in Tubular Structures (Annual Report of IIW Subcommission XV-E), Zhao, Xiao-LingXV-F-35-95, Sub-Commission XV-F List Of Documents For 95/96, Horikawa, K.XV-F-39-95, Draft Proposal For A Guidance For Reliability Analysis Of Welded Structures With A Probabilistic Approach, Lanzone, C.XV-F-40-96, Minutes Of The 5th Meeting Held In Genoa On December, 4th 1995, XV-F-41-95, Sub-Commission XV-F 6th Meeting On September 4th (Wednesday) 1996, 14:00- 17:00. AGENDA., AnonXV-F-6-94, NDT Acceptance Levels And Their Relation To Weld Quality Levels Defined In ISO 5817/ En 25817, Larsen, B.XV-F-7-94, IIW Subcommission XV-F. Minutes Of The First Meeting In Delft On 21 January 1994, Anon.XV-F-8-94, Adaptive Standards For Structural Integrity, Marshall, P.W.XV-F-9-94, IIW Subcommission XV-F Draft Proposal For Terms Of Reference, Feder, D.K.XV-G-108-02, Annual Report of Sub-Commission XV-G; Fundamentals of Seismic Design and

Page 278

Fabrication of Welded Structures, Davies, G.XV-G-111-02, Minutes (Davies/Weisner) of the JWG Sub-Comission XV-G and Commission XMeeting - Brittle Fracture of Moment Conections, XVI-454-85, Ultrasonic Welding - Principles And Theory, Potente, H.XVI-468-85, Calculation Of Thermoplastic Tanks And Apparatus Rectangular Tanks, Structural Details (Direction DVS 2205, Part 5, Suppl. Sheet; 10.84), Anon.XVI-469-85, Welding Of Thermoplastics, PE-HD, Pipes And Pipeline Components For Gas And Water Mains (Data Sheet DVS 2207, Part 1; 05.84), Anon.XVI-470-85, City Gas Distribution Pipe Systems Built With Plastics In Europe, Kimura, H.XVI-471-85, application Of Microwave For Dental Technique (Part 2) -Adaptability Of Cured Acrylic Resins-, Kimura, H., Teraoka, F. and Saito, T.XVI-472-85, Investigation Of The Weldability Of Dissimilar PE-HD-Pipe Materials By Heated Tool Butt-Welding, Menges, G., Michel, J. and El Barbari, N.XVI-473-85, Recent Progress In Plastics Sheet Lining, Kimura, H.XVI-474-85, FRP Processing Robot Of Latest Design In Japan, Kimura, H.XVI-475-85, The Influence Of Misalignment On the Quality Of Heated-Tool Butt-Welded PipesAnd Sheets Made Of HDPE, John, P. and Hessel, J.XVI-476-85, Inspection Of Welding Equipement, Svanum, M.XVI-477-85, Laser-Speckle-Photographie As A Method For Testing Heated Tool Butt Fusion Welding Joints, Potente, H. and Michel, P.XVI-478-85, Some Aspects About The Joining And Cooling Of Heated Tool Butt Welding, Potente, H. and Tappe, P.XVI-479-85, Joining Methods For PE Casing Pipes Of District Heating Systems, Wolters, M., Alferink, F.J.M., Blom, D.G. and Venema, B.XVI-480-85, Ageing Behaviour Of Bonded Metal Joints, Hahn, O. and Yi, X.S.XVI-481-85, AGENDA For The Meeting of Com. XVI Welding Of Plastics At The Annual Assembly At Strasbourg/France, Anon.XVI-482-85, Welding Compatibility, Wolters, M.XVI-483-85, Strasbourg Annual Assembly. 3 September 1985. Summary Of Decisions Taken,Potente, H.XVI-484-85, Strasbourg Annual Assembly. 4 September 1985. Summary Of Decisions Taken,Potente, H.XVI-485-85, Strasbourg Annual Assembly. 5 September 1985. Summary Of Decisions Taken,Potente, H.XVI-486-85, Strasbourg Annual Assembly. 6 September 1985. Summary Of Decisions Taken,Potente, H.XVI-487-85, Commission XVI Welding Of Plastics Annual Statement (Of The Meeting At Strasbourg, France, 1985), Potente, H.XVI-488-86, Conclusions Of Practical Relevance For The Pre-Treatment Of Plastics Surfaces To Be Bonded, Suchanek, H.J.XVI-489-86, Influence Of Curling Conditions On The Mechanical Behaviour Of Adhesive Joints, Hahn, O. and Yi, X.-S.XVI-490-86, Testing Of Semifinished Products Of Thermoplastics - Weldability - Test Methods- Requirements (Dir. DVS 2201 Part 2; 07.1985), Anon.XVI-491-86, Testing Of Welded Joints Of Thermoplastics - Test Methods - Requirements (Dir. DVS 2203 Part 1; 03.1986), Anon.XVI-492-86, Testing Of Welded Joints Of Thermoplastics - Tensile Test (Dir. DVS 2203 Part 2;

Page 279

07.1985), Anon.XVI-493-86, Testing Of Welded Joints Of Thermoplastics - Tensile Impact Test (Dir. DVS 2203 Part 3; 07.1985), Anon.XVI-494-86, Testing Of Welded Joints Of Thermoplastics - Tensile Creep Test (Dir. DVS 2203Part 4; 03.1986), Anon.XVI-495-86, Testing Of Welded Joints Of Thermoplastics - Technological Bending Test (Dir. DVS 2203 Part 5; 07.1985), Anon.XVI-496-86, Heated Tool Welding Of Thermoplastics - Pipelines Of Polypropylene (PP) (Date Sheet DVS 2207 Part 11; 04.1985), Anon.XVI-499-86, Testing Of Dissimilar Material Welds Of Various PE-HD-Pipe Materials, Menges, G., Michel, J. and El Barbari, N.XVI-500-86, Microstructure In Tool-Butt-Welding Joints In Polypropylen-Pipes, Egen, U.XVI-501-86, Computer Control In The Heated Tool Butt Welding Of Plastics, Potente, H. and Kreiter, J.XVI-502-86, Scale Up Laws In Heated Tool Butt Welding Of Semicrystalline Thermoplastics, Potente, H. and Tappe, P.XVI-503-86, AGENDA, For The Meeting Of Com. XVI Welding Of Plastics At The Annual Assembly In Tokyo / Japan, Anon.XVI-504-86, Adhesive Bonded Press-Fits, Hahn, O. and Grunau, A.XVI-505-86, Welding Machines For Electrofusion, Usclat, D.XVI-510-86, Annual Statement Of The Meeting At Tokyo, Japan, 1986. 13 July - 19 July 1986, Potente, H.XVI-512-87, Welding Of Thermoplastics, HDPE (High Density Polyethylen), Heated Tool Butt Welding, Pipes And Pipeline Components For Sewerage Pipes And Lines (Direction DVS 2207 Part 2, 03.86), Anon.XVI-513-87, Hot-Gas Welding Of Thermoplastics, Sheets And Pipes, (Data Sheet DVS 2207 Part 3, 04.86), Anon.XVI-514-87, Hot-Gas Welding Of Thermoplastics, Sheets And Pipes, Welding Parameters (Data Sheet DVS 2207 Part 3, Suppl. Sheet 04.86), Anon.XVI-515-87, Imperfections In Plastic Welded Joints, Classification, Terminology (DIN 32 502, 07.1985), Anon.XVI-516-87, Long-Term Strength Of Welds In Polyethylene Lining Sheets For Refuse Dumps, Hessel, J. and John, P.XVI-518-87, A Study Of Relations Between The Welding Parameters, The Morphology And Mechanical Characteristics Of Polypropylene Welded Joints, Kamenova, L., Alexiev, K., Korab, G., Bezruk, L. and Borisova, G.XVI-519-87, Jointing In Plastics Gas Distribution Systems, Wolters, M. and Venema, B.XVI-521-87, Heated Tool Butt Welding With A Constant Joining Rate, Potente, H. and Kreiter, J.XVI-522-87, Application Of Shape Memory Polymer To Dental Materials (Part 1) -Physical Properties-, Kimura, H. and Teraoka, F.XVI-524-87, Experiments For Parameter Optimization In Ultrasonic Welding Of Plastics, Menges, G. and El Barbari, N.XVI-525-87, Basic Principles Of Friction Welding Of Semicrystalline Thermoplastics, Potente, H. and Tappe, P.XVI-526-87, Correlation Techniques To Interprete Welding Process, Hans-Jurgen, S.XVI-535-88, Electrofusion Of PE Pipes; The Necessity Of A Proper Surface Treatment,

Page 280

Scholten, F.L. and Rouwenhorst, R.XVI-536-88, Fusion Jointing Of PE Gas Pipes, Anon.XVI-539-88, Calculation Of Thermoplastics, Tanks And Apparatuses, Characteristic Values (Direction DVS 2205 Part 1, 06.1987), Anon.XVI-540-88, Influence Of The Curling Conditions On The Stress Dependent Characteristics OfAdhesive Bonds, Mathias, A. and Hahn, O.XVI-541-88, Failure Of Adhesive Bonded Galvanised And Zinc Plated Steel Sheets Under Loading, Kroos, K. and Hahn, O.XVI-542-88, Industrial Pipelines Of Thermoplastics, Design And Construction, Surface Pipelines (Direction DVS 2210 Part 1, 06.1987), Anon.XVI-543-88, Amendments To: Testing Of Plastics Welders; Test Group I / Direction DVS 2212Part 1, August 1982. (Suppl. Sheet 1, 11.1987), Anon.XVI-544-88, Parameter Optimization In Ultrasonic Welding, Michaeli, W., El Barbari, N. and Netze, C.XVI-547-88, The Influence Of Pressure And Time To Strength Of Vibration-Welded Polypropylene Butt Welds, Schlarb, A.K. and Ehrenstein, G.W.XVI-549-88, Morphology And Thermoelasticity Of Crystallized Polymers Welded Joints, Bezruk, L.I., Esaulenko, G.B., Korab, G.N. and Privalko, V.P.XVI-550-88, On The Possibility Of Using The Morphological And Mechanical Properties Of Fin From Polyolefin Butt Welded Joints To Estimate Their Quality, Esaulenko, G.B., Kondratenko, Vu., Bezruk, L.I. and Korab, G.N.XVI-610-91, Commission XVI Welding Of Plastics Annual Report 1991 (Of The Meeting At The Hague/Netherlands, 01. July - 04 July 1991), Meland, T.XVI-611-92, Investigation Of Discontinuity Of Physico-Mechanical Properties Of PolypropyleneWelded Joints, Sergienko, S.A., Esaulenko, G.B. and Bykov, A.N.XVI-613-92, Welding Of Thermoplastics, Extrusion Welding, Panels and Pipes (Dir. DVS 2207Part 4, Approved Version For Final Edition 1992), Anon.XVI-614-92, Welding Of Thermoplastics, Extrusion Welding, Panels and Pipes, Welding Parameters For HDPE And PP (Dir. DVS 2207 Part 4, Suppl. Sheet, Approved Version For Final Edition 1992), Anon.XVI-615-92, Examination Of Plastic Welders, Examination group II, Hot Gas Extrusion Welding (Dir. DVS 2212 Part 2, 05.92), Anon.XVI-616-92, Ultrasonic Joining Of Moulded Parts And Semi-Finished Parts Of Thermoplastic Polymers In Mass Production - Machines And Equipment, Function Description And Requirements (Guideline DVS 2216 Part 1, Approved Version For Final Edition 1992), Anon.XVI-617-92, Ultrasonic Joining Of Moulded Parts And Semi-Finished Parts Of Thermoplastic Polymers In Mass Production - Ultrasonic Welding, Methods And Features (Guideline DVS 2216 Part 2, Approved Version For Final Edition 1992), Anon.XVI-618-92, Ultrasonic Joining Of Moulded Parts And Semi-Finished Parts Of Thermoplastic Polymers In Mass Production - Forming With Ultrasound; Staking, Swaging And Tamping (Guideline DVS 2216 Part 3, Approved Version For Final Edition 1992), Anon.XVI-619-92, Ultrasonic Joining Of Moulded Parts And Semi-Finished Parts Of Thermoplastic Polymers In Mass Production -Embedding Of Metal Parts And Dissimilar Plastics With Ultrasound (Guideline DVS 2216 Part 4, Approved Version For Final Edition 1992), Anon.XVI-621-92, Quality Assurance In Heated Tool Welding By The Correlation Of Process Data With A Quality Criterion, Potente, H. and Natrop, J.XVI-622-92, Computer Aided Design Of The Vibration Welding Process, Potente, H. and

Page 281

Uebbing, M.XVI-623-92, Examinations Concerning The Influence Of Plasma Treatment And Corona Treatment On The Characteristic Profile Of Adhesive Bonds With Galvanised Steel Sheets, Hahn, O. and Motzko, B.XVI-624-92, Influence Of The Process Parameters On The Quality Of Thermosetting AdhesiveJoints, Hahn, O., Chudaska, A. and Husgen, B.XVI-625-92, Analysis Of Ultrasonic Welding Of Advanced Thermoplastics, Michaeli, W., Netze, C. and Korte, W.XVI-627-92, AGENDA For The Meeting Of Com. XVI Welding Of Plastics At The Annual Assembly At Madrid/Spain, Potente, H.XVI-629-92, Hot Plate Welding Of Thermoplastic Mouldings In Volume Production, (Specification DVS 2215 Part 1, February 1991), Anon.XVI-635-92, Annual Report 1992 Meeting At Madrid/Spain 05 September - 12 September 1992, Potente, H.XVI-653-94, Examination Of Plastic Welders - Examination Group I, Anon.XVI-656-94, Surface Modification Of HDPE And Deposition Of Acetylene Plasma Polymerization, Zou, X., Yi, X.-S. and Ma, D.XVI-657-94, Mechanical Behaviour Of Shrink-Bonded Cylindrical Joints Under Dynamic Loading, Hahn, O. and Hild, G.XVI-658-94, SACO - Modified Sand Blast Treatment For Bonding Surfaces-, Hahn, O. and Motzko, B.XVI-659-94, The Effects Of Moisture On The Vibration Welding Of Polyamide, Potente, H. andUebbing, M.XVI-660-94, Comparison Of Three Methods For Welding Glass Fibre Reinforces PES, Potente, H., Natrop, J., Uebbing, M. and Petersen, T.K.XVI-661-94, Welding Of PE-HD-Pipes And PE-HD-Piping Components For Gas And Water Distribution Systems. Curriculum - Terms Of Examination For PE-HD-Welders, Anon.XVI-662-94, Quality Assurance In Ultrasonic Welding On The Basis Of Statistical Process Models - Prediction Of Weld Strength, Michaeli, W. and Korte, W.XVI-663-94, AGENDA, For The Meeting Of Com. XVI Welding Of Plastics At The Annual Assembly In Beijing/China, Potente, C.XVI-663a-94, AGENDA For The Meeting Of Com. XVI Welding Of Plastics At The Annual Assembly In Beijing/China, Potente, H.XVI-669-94, Research On Testing And Welding Of PE-Geomembranes -A Survey And A Preview -, Anon.XVI-673-95, Call For Papers, Potente, H.XVI-675-95, The Effect Of Ageing On Structure And Properties Of Hot Plate Welds In Acrylonitrile-Butadiene-Styrene, Tavakoli, S.M.XVI-676-95, Structure Evaluation Of Polyethylene And Polypropylene Hot Plate Welds, Stevens, S.M.XVI-677-95, Vibration Welding Nylon 6 And Nylon 66 - A Comparative Study, Froment, I.D.XV-SCG-103-02, IIW Recommendations for Assessment of Risk of Fracture in Seismically Affected Moment Connections (A Report Prepared by the Joint Working Group of Commissions X and XV), XV-WG9-16-02, Thickness Design of Axially Compressed Unstiffened Cylindrical Shells with Circumferential Welds, Farkas, J.XV-WG9-17-02, Cost Comparison of Bolted and Welded Frame Joints, Farkas, J.; Jarmai K.;

Page 282

Visser-Uys, P.XV-WG9-19-02, Fabrication and Economical Aspects in the Design of Welded Structures and Details to IIW Commission XV, Jarmai, K.XV-WG9-23-03, Optimum design and cost calculation of a simple frame with welded or bolted corner joints, Jarmai, K., Farkas, J., Uys, P.XV-WG9-23-03, Optimum Design of a Belt-Conveyor Bridge Constructed as a Welded Ring-Stiffened Cylindrical Shell, Farkas, J.; Jarmai, K.; Virag, Z.XV-WG9-23-03, Optimum design of a belt-conveypr bridge constructed as a welded ring-stiffeened cylindrical shell, Farkas, J., Jarmai, K., Vorag, Z.X-WGSD-13-74, Proposed Acceptance Standards For Flaws With Respect To Failure By Brittle Fracture, Anon.X-WGSD-14-74, Additional Notes For Guidance On Proposed Acceptance Standard (DOC X-WGSD-13), Anon.

Page 283