Shock cushioning

Impact energy dispersion

Shock wave absorption

With ACTIV CUSTOM reinforced protective cases, made in France, your mobile printers are always fully protected in case of drops and shocks. Many options are available for you to adapt your ACTIV case to your specific needs. The ACTIV cases are also adjustable to any device brand.

REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER (910)

+

PRINTOUT OPENING

BUTTONS OPENING

PERIMETRIC BUMPERDouble integral bumpers on the 4 sides of the device absorbs lateral and corner shocks both from above and below.

PATENTED INNOVATION

www.mobiliscase.com@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase

REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER

ERGONOMICS ACCESSORIES INCLUDED

+

Belt strap

Snap fastener

Belt 40mm

Ref. 001056

Optional

Rings for shoulder straps

Safety carry shoulder strap

2 attachment points

Ref. 001027

Basic shoulder strap with 4 soft ring

Ref. 001025

arrachement programmé

Systè

me de sécurité à

Optional

2 sewed rings.

Mandatory for shoulder straps

Snap fastener to secure the device in the case

www.mobiliscase.com@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase

www.mobiliscase.com

@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase

REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER

OPTIONNAL

+

Flap

Crocodile clip

Logo

Closing flap with Velcro® security. Polyester 1680D finishing. Replace the snap fastener

Ref. 910F-FLF-FER-VEL

Replace the belt strap included

Ref. 910R-EAC-CROCLI

Replace the belt strap included. Adaptable height thanks to a snap fastener

Ref. 910F-EAC-PASS-BCL

On the flap. 54x28mm

Ref. 902F-IDE_LOGO54x28

Belt strap with snap fastener

Replace the belt strap included

Ref. 910F-EAC-WHEEL

Wheel

Belt clip with Clip 06

Ref. 910N-EAC-BELTCL

Belt strap with Clip 06, 50mm

Ref. 910N-EAC-BELTST

Optional