regupol vibration 480 · regupol® vibration 480 illustration of the isolation eficiency of a...

REGUPOL AMERICA LLC | 11 RITTER WAY LEBANON, PA 17042

REGUPOL-ACOUSTICS.COM | 1.717.675.2190

Technology on Your Wavelength

Regupol® Vibration 480


Standard forms of delivery, ex Lebanon, PA

Rolls

Thickness: 15 mm

Length: 30' (9,144 mm)

Width: 48" (1,219 mm)

Max. static load

21.8 psi

Peak loads (rare, short-term loads)

36.3 psi

Static modulus of elasticity Based on EN 826 36.3 - 116.0

0.25 - 0.80

psi

N/mm2

Tangential modulus, see igure

“Modulus of elasticity”

Dynamic modulus of elasticity Based on DIN 53513 174.0 - 479.0

1.2 - 3.3

psi

N/mm2

Depending on frequency, load and

thickness, see igure “dynamic stiffness”

Mechanical loss factor DIN 53513 0.17 [-] Load-, amplitude- and

frequency-dependent

Compression set Based on

DIN EN ISO 1856

3.0 % Measured 30 minutes after decompression

with 50% deformation / 23 °C after 72 hrs

Tensile strength Based on

DIN EN ISO 1798

52.2

0.36

psi

N/mm2

Elongation at break Based on

DIN EN ISO 1798

55 %

Tear resistance Based on DIN ISO 34-1 25.7 lbs/in

Sliding friction in-house laboratory

in-house laboratory

0.7

0.8

[-]

[-]

Steel (dry)

Concrete (dry)

Compression hardness Based on

DIN EN ISO 3386-2

220 kPa Compressive stress at 25 % deformation

Test specimen h = 60 mm

Rebound elasticity Based on

DIN EN ISO 8307

31 % Depending on thickness,


Force reduction DIN EN 14904 72 % Depending on thickness,


Ozone resistance DIN EN ISO 17025 Cracking

stage 0

[-]




Load Ranges

Load Deflection

Regupol® type

2.9

7.3

14.5

17.4

21.8

43.5

116.0

218.0

200 300 400 450 480 550 800 1000

Regupol® vibration M

ax.

sta

tic

lo

ad

psi

0.02

0.05

0.10

0.12

0.15

0.30

0.80

1.50

N/mm2





Vibration Isolation

Natural Frequency


Illustration of the isolation eficiency of a single-degree-of-freedom system (SDOF system) on a rigid base with

Regupol® vibration 480. Parameter: power transmission (insertion loss) in dB, isolation factor in %.

200

180

160

140

120

100

80

60

40

20

4 8 12 16 20 24

natural frequency [Hz]

dis

turb

ing fre

quency [

Hz]

28 32 36 40

-40 dB / 99 %

-35 dB / 98 %

-30 dB / 97 %

-25 dB / 94 %

-20 dB / 90 %

-10 dB / 69 %

0 dB / 0 %




Modulus of Elasticity

Dynamic Stiffness





Long-Term Creep Test

Regupol America, LLC is a product manufacturer and does not represent itself as a consultant, engineer, or advisor in construction methods, standards, and

compliance. Therefore, Regupol America only warrants its products under its standard limited warranty (available by request), and does not represent or warrant

any advice, suggestions, instructions, whether formal or informal, oral or written, in conjunction with any sales of its products. Any such advice is not intended for a

particular purpose and should not be acted or relied upon as such. Any such advice is not represented as being all-inclusive, correct, complete or up-to-date.

The information and data contained herein are based on industry accepted testing, manufacturing tolerances and prior product usage as set forth. It is intended as

descriptive of the performance characteristics and capabilities of Regupol/Regufoam and does not certify applicability for any particular or speciic project. Technical

assistance, calculations and design recommendations are available from Regupol America, and are subject to terms and conditions provided upon request.

Regupol 480, Version 1, Release 10/2015

regupol vibration 480 · regupol® vibration 480 illustration of the isolation eficiency of a...

Documents