references - shodhgangashodhganga.inflibnet.ac.in/bitstream/10603/120410/... · 111(i) v,sekkar,...
TRANSCRIPT
REFERENCES
1. O.Bayer, Angew Chemie.,1947, A59, 275.
2. 0.Bayer, H.Rinke W. Siefken, L.Ortmer and H.Schild (1942).
(1.G.Farbenindustrie) German Patent 728981.
3. Hochtlen. A, Kunstoffe, (1952). 42 ,303.
4. J.H. Saunders, KC.Frisch, (1964). Polyurethanes Chemistry and
Technology, Part I & II, Interscience Publishers, NY.
5. E.N.Doyle, (1971). Development and use of Polyurethane foam, Mc
Graw Hill Book Co., New York.
6. George Woods, (1982). Flexible Polyurethane foams, Chemistry and
Technology, Applied Science Publishers, Ltd., UK.
7. Giinter Oertel., Ed., (1985). "Polyurethane Handbook", Hanser
Publishers, Munich, Vienna, NY
8. R.B.Cruse, ( 1968). "Advances in Development and Applications",
Vol. 6., Modern Materials, Academic Press N.Y.
9. Paul F. Bruins, (1969). Polyurethane Technology, Interscience
Publishers, New York.
10. C.Hepburn, (1982). Polyurethane Elastomers, Applied Science
Publishers, London.
11. A.H. Land Rock, (1969). 'Polyurethane foams, Tecchnology,
Properties and Application", Plastec Report, 37, Plastics Technical
Evaluation centre, Piccatinny Arsenal, Dover, NJ, pp. 50-51
12. A.A.R.Sayigh, H.Ulrich, W.J.Frissey, Jr, (1972). "Condensation
Monomers" Chapter.5 (Ed), J.K.Stille, T.W.Campbell, Wiley NY.
195
13. Geoffrey C. Eastmond, Saverio Russo, Anthony Ledwith (Ed), (1989).
Comprehensive Poly. Sci., Vo1.5, Pergamon Press, Oxford.
14. Petrella, R.G. and McGovern, M.J. Proceedings of the 30th Annual
Techn. /Mark. Conference, Toronto, Canada, Oct. 1986 , p. 13 8.
15. S.L.Axelrood, K.C.Frisch, (1960). Rubber Age, Vol 88, N 3,Dec., pp.
465-471
16. A.A.R.Sayigh, H.Ulrich, W.J.Frissey, Jr, (1972). "Condensation
Monomers" Chapter. 5 (Ed), J.K.Stille, T.W.Campbell, Wiley NY.
17. K.Findeisen, K.Konig, R.Sunderman, Houben-Weyl-Methoden den
Organischen Chemie, (1983). 4th Edn; Editor H.Heymann, Thieme
Verlag, Stuttgart.
18. P.J.Flory, (1877). J. ofAmerican Chemical Society, 1936,58.
19. Nicholas, L. and Gmitter, G.T. (1965). J. Cell. Plast., 1(1),85.
20. Yokoyama, T. (1978). In Advances in Urethane Science and
Technology, Vol. 6 (Frisch, K.C. and Regen, S.L., Eds.), Technomic
Pub. Co., Westport Conn., p. 27.
21. British Patent 1430455 (lCI).
22. British Patent 1110791 (National Research and Development
Corporation).
23. Belgium Patent 634741 (Bayer).
24. British Patent, 1113926 (lCI).
25. Schollenburger, C.S. and Stewart, F.D. (1971), In Advances in
Urethane Science & Technology, Vol. 1. (Frisch, K.C. and Regen,
S.L., Eds.), Technomic Pub. Co" Westport Conn.
26. Spitz H.D. (1980), J. Chromat., 190(1), 193.
196
27. Voorhees K.J., Einhorn, I.N., Hileman, F.D. and Wojcik, L.H. (1975).
J. Pol. Sci. (Pol. Lett.), 13(5), 293.
28. Munn, A. (1975), New Scientist, 66(943), 46.
29. BS 2782-104B:1970, Cold Flex Temperature.
30. Woods, G. (1978). In Developments in Polyurethane, Vol. 1 (Buist,
J.M., Ed.), Applied Science Publishers, London, p. 84.
31. Editorial Review (1978), Plast. Techn. 24(8), 132.
32. Sneller, J. (1979), Mod. Plast.(Eng.), 56(9), 65.
33. Kenney, J. (1978), Plast. Eng., 34(5), 32.
34. Cox, E.F. and Hosteller, F. (1959), Paper presented at the American
Chemical Society meeting, Boston, April 1959.
35. British Patent, 892137 (Union Carbide).
36. Saunders. J.H. (1960), Rubb. Chem. Techn., 33(5), 1293.
37. U.S.A. Patent 3728291 (Air Products & Chem.)
38. U.S.A. Patent 4134994 (Air Products & Chem.)
39. U.S. Patent 3372130 (Upjohn).
40. British Patent 1372544 (Dunlop).
41. U.S.A. Patent 3792240 (Dunlop).
42. European Patent 3210 (B.A.S.F.)
43. Petrella R.G. and S.A. Kushner, (1990). "Cell Opening Catalysts",
Proceedings if the SPI 33rd Annual Technical Marketing Conferem�e,
Lancaster PA: Technomic Publishing Company, Inc., pp. 186-190.
197
44. Cooper, S.L. and Tobolsky, A.V. (1966). J. Appl. Polym. Sci., 10(12),
1837.
45. Redman R.P. (1978). Developments in Polyurethane Elastomers
Developments in Polyurethanes - I, J.M. Buist, ed., London, Applied
Science Publishers.
46. Kotsky, J.S., Hein, N.V., and Cooper S.L. (1970). J. Appl. Polym. Sci.,
8(5), 353.
47. Samules, S.L. and Wilkes G.L. (1971). Polym. Lett., 9(10), 761.
48. Fridman, I.D. and Thomas E.L. (1980). Polymer, 21(4) 388.
49. Bonart R. (1979). Polymer, 20(11), 1389.
50. Zdrahala, R.J., Gerkin, R.M., Hager S.L. and Critchfield, F.E. (1979).
J. Appl. Polym. Sci., 24(6), 2041.
51. Blair, E.A. (1967). Cell Structure and Physical Properties of
Elastomer Cellular Plastics", in Resinography of Cellular Plastics,
ASTM STP 414, pp. 84-95.
52. British Patent, 1339442 (Dunlop).
53. British Patent, 2025439 (Bridgestone Tire).
54. Sauders, J.H. (1960). Rubb. Chem. & Tech., 33(5),1293.
55. Rossmy, G.R., Kollmeier, H.J., Lidy, W. Schator, H., and Wiemann,
M. (1977). J. Cell. Plast., 13(1), 26.
56. Schwarz E.G. (1970). Silicone Surfactants for Urethane Foams,
Mechanism, Performance and Applications", in Applied Polymer
Symposia, No. 14: Silicone Technology, New York, John Wiley and
Sons, pp. 71-93.
198
57. Battice, D.R. and W.J. Lopes (1987). New Cell opening Surfactants
for Moulded High Resiliency Polyurethane Foam. J. Cell. Plast.,
23(2)� 158-167.
58. Zharkov V.V., Kopusov L.I. and Petrov E.A. (1980). Paper X(D),
S.P.I. International Urethane Conference, Stratsburg, June 1980.
59. Hauptmann G., Dorner K.H., Hocker H., and Pfisterer G. (1980).
Paper X(D), S.P.I. International Urethane Conference, Stratsburg,
June 1980.
60. Kurt C. Frisch, Daniel Klempner (1992). Advances in Urethane
Science and Technology, Vol. 11, Technomic Publishing Company
Inc., USA.
61. Bikerman, J.J. (1953). Foams: Theory and Industrial Applications,
New York: Reinhold.
62. Baumhakel, R. (1972). "Influence of Stirring Velocity and Air
Loading on the Formation of Flexible Urethane Foams", J. Cell.
Plast., 8(6), 304-310.
63. Bunsen, R. (1855). Ueber das Gesetz der Gasabsorption", Ann. 93: 1-
50.
64. George Woods (1982). Flexible Polyurethane foams, Chemistry and
Technology, Applied Science Publishers, Ltd., UK, p. 98.
65. Buist, J.M. (1959). "Polyurethane Foams: Basic equipment for
producing Flexible and Rigid Fnams", Proceedings International
Rubber Conference, Washington DC, pp. 9-20.
66. Buist, J.M., R. Hurd and A. Lowe (1960). "Polyurethane Foams :
Methods of Production, Properties and Applications", Chem. Ind.,
1544-1588.
. 199
67. R.C. Burck, (Nov 1968). Microcellular Urethanes elastomers
breakthrough, 2nd International Cellular Plastic Conf., NY
68. L.M.Zwolinski, (1971). Advances In Urethane Science and
Technology, VoU, Technomic Publishing Co., USA.
69. D.Blanca, R.E.Knox,(1966). Rubber Age, Vol. 98; May 1966; pp. 78
80.
70. M.E.Bailey, M.Kaplan,B.Taub and G.Wooster (1969). J. of Cel/.
Plastics, Vol.5, N.4, pp. 237-246
71. R.O.Menard, (1964). "MicroceIIular Adiprene L- Vulcanizates blown
with nitrosan" Adiprene Urethane Rubber Bulletin, E.I.DuPont
Nemours & Co. Inc., Jan 21.
72. N.N.Saaty et al., J. ofElastplast, V.1, July (1969), pp 170-184.
73. L.M.Zwollinski, M.Kaplan, M.E.Bailey (1970). SPI Cellular plastics
Divn., 14th Annual Tech. Conference; Mich. Feb 1970
74. Witco Chemical Co., (1964). Technical Service Bulletin, No.F-13,
April.
75. L.H.Sperling et al., (1990). Sound and vibration damping with
polymers- American Chemical Society, Washington, USA
76. D.Klempner, B.Muni., and M.Okaroafor, K.C.Frisch. (1990). Energy
Absorbing Two-and Three- component Interpenetrating Polymer
Networks, Advances in Interpenetrating Polymer networks- Vol II
Technomic Publish. Co. Inc.
77. F.Oshishi, y'Ogawa, S.Nakamura, A.Yokota, (1990). Proceeding of
SPI 33rd Annual Technical Marketing Conf., Technomic Publishing
CO.,Inc., NY.
200
78. Shuren Yao, (1994). Advances in Interpenetrating Polymer Networks,
Vol-IV, Technomic Publishing Co., Inc, 1994, pp. 243-286
79. Frisch H.L., D. Klempner, K.C.Frisch, (1969). J. of Poly. Sci, Polymer
Letters
80. Sperling. L.H., D.W.Friedman, (1969) J. of Poly. Sci, A-2(7) ; 425
81. Lipatov.Yu, L.Sergeeva, (1979). Interpenetrating Polymer Networks
(in Russian), Kiev, Naukova Kumba
82. Gunst, R.F., R.L. Mason, L.H. James, "Statistical design and Analysis
of Experiments with Applications to Engineering".
83. Chremisinoff, N.P. (1990). "Product Design and Testing of Polymeric
Materials", Marcel Dekken, New York, pp. 438-511.
84. Derriger, G.C. (1990). "Statistical Methods in Rubber Research and
Development", Rubber Chemistry and Technology.
85. Taguchi, G. (1986). "Introduction to Quality Engineering", Asian
Productivity Organisation.
86. P.E.Kreter, (1985). Proceeding of SPI 29th Annual Technical
Marketing Conf., Technomic Publishing Co., Inc., NY, pp. 129-133.
87.
88.
89.
90.
91.
92.
K.C.Frisch, "Recent trends in Polyurethane Science and Technology",
Detroit, USA.
Bonart. R., Angew, Makromol. (1977). Chem. 58/59; 259.
Goyert, W; .H .. Hespe, Kunstoffe (1978). 68: 819.
Minoura,Y. ,et al (1979). Rubber Chemistry Technology, 52: 920.
Blackwell, I., K.H. Gardner, (1979). Polymer 20 : 13.
, ..... :�� .. . t .,,,
93. Lewis , G.D. (1985). J. Cell. Plastics , 21(2) , 120.
94. Brown, (1987). M.J. Proceedings of FSK/SPI, Aachen , W. Germany,
Technomic Publishing Co., Lancaster , PA , p. 538.
95. D.H.Ridgway, C.F.Oswald, (1985). Proceeding of SPI 29th Annual
Technical Marketing Conf., Technomic Publishing Co.,lnc., NY, pp
134
96. Lorna J. Gibson and Michael F. Ashby, (1988). "Cellular Solids -
Structure and Properties", Pergamon Press, Oxford.
97. MustinG.S., (1968). "Theory and Practice of Cushion Design", US
Government Printing Office, Washington D.C.
98. Hillyard N.C. ( ed.) (1982). Mechanics of Cellular Plastics, Applied
Science Publishers, London.
99. Lockett F.J., Cousines, R.R. and Dawson D. (1981). Plast. Rubber
Proc. Appl., 1, 25.
100. Gren, S.J., Schierloh F.L., Perkins R.D. and Babcock, S.G. (1969).
Exp. Mech., March, p. 103.
101. Rusch K.C. (1971). J. Cell. Plast., 7, 78.
102. Rusch K.C. (1970). J. Appl. Polymer Sci., 14, 1263 and 1433.
103. Lee W.M., and Williams, B.M. (1971). J. Cell. Plast, 7, 72.
104. Melvin J.W. and Roberts, V.L. (1971). J. Cell. Plast. 7, 97.
105. Meinecke, E.A., Schwaber D.M. and Chiang, R.R. (1971). J.
Elastoplast., 3, 19.
106. Meinecke, E.A. and Schwaber D.M. (1970). J. Appl. Polymer Sci., 14,
2239.
.202
107. Schwaber, D.M. and Meinecke, E.A. (1971). J. Appl. Polymer Sci., 15,
2381.
108. Schwaber, n.M. (1973). Polymer-Plast Technol. Eng., 2, 231.
109. Muni.B., n.K1empner and M.Okaroafor. (June 25,1987). Two and
three component IPN Elastomers with Enhanced Sound Absorption
Properties, A.C.S. 19th Central Regional Conf.
110. Rossmy, G.R., H.J. Kollmeier, W. Lidy, H. Schator and M. Wiemann (1977).
"Cell-opening in One-shot Flexible Polyether Based Polyurethane Foams:
The Role of Silicone Surfactant and its Foundation in the Chemistry of Foam
Formation", J. Cell Plast., 13(1): 26-35.
111(i) V,Sekkar, S.RJain and V.N.Krishnamurthy, (1992.) "Characterization of
copo1yurethanes based on HTPB and ISRO Polyol", Proceedings on the
colloquium on HTPB, 129- 137, V.S.S.C, I.S.R.O.Thiruvanathapuram,
111(ii) V,Sekkar, (May 1996) PhD Thesis - Modelling and characterization of
HTPB based polyurethane networks as solid propellant binders,Dept of
Aerospace Engineering, Indian Institute of Science, Bangalore.
Ill. Scariah, KJ., Rama Rao, M., Ravindran, P.V., Chandrasekharan, G., A1wan,
S, Sastri. K.S. (1992). "Correlation of mechanical properties with
functionality and molecular weight distribution for HTPB polymers",
Colloquium on HTPB, VSSC, Trivandrum
112. Balagangadharan, V.P, Korah Bina Catherine, Ninan.K.N., (1992).
"Effect of Molecular weight distribution of HTPB on the mechanical
properties of the cured polymer", Colloquium on HTPB, VSSC,
Trivandrum
113. Frensdorff, H.K. (1958). "Polyurethane Foams: Stability, Collapse,
Shrinkage", Rubber Age (August): 812-818.
114. Boudreau, RJ. (1967). How Silicones Surfactants Affect Polyurethane
Foams", Mod. Plast. (January) pp. 133-138, 143-147, 234-240.
203
115. Dahm, M. (1967). The Role of Surfactants during Polyurethane Foam
Formation", in Cellular Plastics, National Academy of Science -
National Research Council Publication 1462, pp. 52-63.
116. D.Klempner, B.Muni., and M.Okaroafor, (1988) Recent
Developments in Polyurethanes and IPNs; Lancaster, P.A.,Technomic
Publish. Co. Inc. pp 51-62
117. van Leuwen, B.G., D.G. Powell, J.E. Puig ad F.S. Natoli (1973).
"Physical and Chemical Approaches to Ideal cushioning Foams", in
Advances in Urethane Science and Technology, Vol. 2, Lancaster,
PA.: Technomic Publishing Company, Inc. p. 173-202.
118. Harding, R.H. (1967). "Morphologies of Cellular Materials", m
Resinography of Cellular Plastics, ASTM STP 414, pp. 3-18.
119. Buist, J.M., G.W. Ball and G. Woods (1968). "Flexible Foam:
Manufactriue and Properties", m Advances on Polyurethane
technology, J.M. Buist and H. Gudgeon, eds., London: Maclaren and
Sons, pp. 152-154.
120. Baumhakel, R. (1972). "Influence of Stirring Velocity and Air
Loading in the Formation of Flexible Urethane Foams", J. Cell. Plast.,
8(6): 304-210.
121. Meinecke, E.A. amd R.C. Clark (1972). Mechanical Properties of
Polymeric Foams, Lancaster PA: Technomic Publishing Company Inc.
122. WN Patten, S Sha, C Mo (1998)" A Vibrational model of open celled
Polyurethane foam Automotive seat cushions" Journal of Sound and Vibration
Academic Press
123. Manohar C.S.; Adhikari S , (1998) "Statics of vibration energy flow
in randomly parametered trusses" -Journal of Sound and Vibration,
Vol. 217, no. 1, pp. 43-74(32) -Academic Press
204
124. DJ Yontz, SL Hsu, WA Lidy, Dr Gier, MH Mazor, (1998) "Direct
observation of morphological differences as a function of reaction
temperature in model systems for polyurethane foams" - Journal of Polymer
Science: Part B: Polymer Physics- John Wiley & Sons, Inc.
125. DJ Hourston, FU Schafer, ( 1996) "Damping characteristics of polyurethane
based simultaneous interpenetrating polymer networks " -High Polymers, vol.
8, no. 1, pp. 19-34(16) : Sage Publications
126. Singh R.; Davies P.; Bajaj A.K. (2003); "Identification of Nonlinear and
Viscoelastic Properties of Flexible Polyurethane Foam "; Nonlinear
Dynamics, Vol. 34, no. 3-4, pp. 319-346; Kluwer Academic Publishers
127. Dauchez N.; Sahraoui S.; Atalla N. (2003); "Investigation and modelling of
damping in a plate with a bonded porous layer"; Journal of Sound and
Vibration, vol. 265, no. 2, pp. 437-449(13) ; Elsevier Science
128. Lewis C.H.; Griffin M.J.; (2002); "Evaluating the vibration isolation of soft
seat cushions using an active anthropodynamic dummy"; Journal of Sound
and Vibration; 23 May 2002, vol. 253, no. 1, pp. 295-311 ( 17); Elsevier
Science
129 David J. Lovell, Michael L. Kerman, et al; (2004); "The Effect of
Temperature on the Dynamic Impact Characteristics of Energy Absorbing
Materials" ; Journal of Cellular Plastics, Vol. 40, No.4,267-275; SAGE
Publications
130 Kerman, M. (1995); "The Effects of Sample Thickness and Temperature on
Energy Absorbing Foams for Automotive Applications.", SAE International
Congress and Exposition, February 27-March 2.
205
131 Kuczynski, E., Yu-Hallada, L. and Weierstall, M. (1995). Polyurethane: The
Material of Choice for Occupant Protection and Energy Management ,
Polyurethane 1995, September 26-29, pp. 390-395 .
132 K.C. Frisch and D. Klempner, (2001); Advances in Urethane Science and
Technology", Rapra, United Kingdom.
133 W. Chen et al (2002); "High-Strain-Rate Compressive Behavior of a Rigid
Polyurethane Foam with Various Densities"; Experimental Mechanics, Vol.
42, No.1, 65-73; SAGE Publications
134 Zhang, l, Kikuchi, N., Li, V., Vee, A., and Nusholtz, G., (1998)"Constitutive
Modeling of Polymeric Foam Material Subjected to Dynamic Crash
Loading," International Journal ofImpact Engineering, 21(5), 369-386
135 Kipp, M.E., Chhabildas, L.C., Reinhart, W.D., and Wong, M.K.,(1999)
"Polyurethane Foam Impact Experiments and Simulations," in APS Shock
Compression of Condensed Matter-1999, June 27-July 2, Snowbird, UT,
APS (1999).
136 Sounik, D.F., Gansen, P., Clemons, J.L., and Liddle, lW., (1997) "Head
Impact Testing of Polyurethane Energy-Absorbing (EA) Foams," SAE
Transactions: Journal of Materials & Manufacturing, 106(5),211-220.
137 Goods, S.H., Neuschwanger, C.L., Henderson, C.c., and Skala, D.M., (1998)
"Mechanical Properties of CRETE, a Polyurethane Foam," Journal of
Applied Polymer Science, 68(7), 1045-1055.
138. Lankford, land Dannemann, K.A., (1998) "Strain Rate Effects in Porous
Materials," Porous and Cellular Materials for Structural Applications,
Materials Research Society, Pittsburg, PA, 103-108.
206
139 Sharma,SC,Murthy,HNN ,Krishna, M (2004); "Effect of foam density and
skin material on the damping behavior of polyurethane sandwich structures" ;
JournarofReinforced Plastics and Composites; 23(12); ppl 259-1266
140 Qin, CL; Cai, WM Cai, J Tang, DYZhang, JS Qin, M (2004); "Damping
properties and morphology of polyurethane/vinyl ester resin interpenetrating
polymer network"; Materials Chemistry and Physics; 85(2-3);pp402-409
141 Qin, CL;Tang, DY Cai, J Zhang, JS Cai, WM Sun, XD;(2003) "Study on
polyurethane/(vinyl ester resin) IPN damping materials"; Journal of Materials
Science & Technology; 19(1 )56-58
142 Kim, SKWhite, SW Bajaj, AK Davies, P; (2003)"Simplified models of the
vibration of mannequins in car seats"; Journal of Sound and
Vibration;264( 1 );49-90
143 Deng, R; Davies, P ;Bajaj, AK;(2003) "Flexible polyurethane foam
modelling and identification of viscoelastic parameters for automotive seating
applications"; Journal of sound and vibration; 262(3) 391-417
144 Hager, S;Skorpenske, R;Triouleyre, S; Joulak, F; (2001) "New technology for
viscoelastic foam"; Journal of Cellular Plastics;37(5)377-399
145 Lapcik,Cetkovsky ,V Lapcikova,B Vasut, S; "Materials for noise and
vibration attenuation"; CHEMICKE LIS TY; Vol 94(2) 117-122
146 Yoon, KH ,Yoon, ST, Park, 00; "Damping properties and transmission loss
of polyurethane. I. Effect of soft and hard segment compositions"; Journal of
Applied Polymer Science; Jan 31 2000; Vol 75(5) 604-611; John Wiley &
Sons, Inc
207
147 L.L.Beranek,I.L.Ver editors, (1992), Noise and Vibration control
Engineering, John Wiley & Sons, Inc, NY
148 Patten, WN ,Sha, S ,Mo, C; A vibration model of open celled polyurethane
foam automotive seat cushions; "JOURNAL OF SOUND AND
VIBRATION"; OCT 15, 1998, Vol 217(1)145-161; Academic Press
208