171

REFERENCES

1. Ackley D.H. (1987), ‘A Connectionist Machine for Genetic

Hillclimbing’, Kluwer, Boston, M.A.

2. Agarwal B.D. and Broutman L.J. (1990), ‘Analysis and performance of

fiber composites’, John Wiley and Sons Inc.

3. Agarwal H., Renaud J.E. and Mack J.D. (2003), ‘A decomposition

approach for reliability-based multidisciplinary design optimization’,

In Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC Structures,

Structural Dynamics, and Materials Conference & Exhibit, number

AIAA 2003-1778, Norfolk, Virginia.

4. Alan P.B., Renaud J.E., Newkirk J.T., Patel N.M. and Agarwal H.

(2007), ‘Reliability-Based Design Optimization of Robotic System

Dynamic Performance’, Journal of Mechanical Design, Vol. 129,

pp. 449-454.

5. Antonio C.A.C., Marques A.T. and Goncalves J.F. (1996), ‘Reliability

based design with a degradation model of laminated composite

structures’ Journal of Structural Optimization, Vol. 12, pp. 16-28.

6. Antonio C.A.C. (2001), ‘A hierarchial genetic algorithm for reliability

based design of geometrically non-linear composite structures’,

Composite Structures, Vol. 54, pp. 37-47.

7. Anukal C. and Mahadevan S. (2005), ‘First-Order Approximation

Methods in Reliability-Based Design Optimization’ Journal of

Mechanical Design, Vol. 127, pp. 851-857.

8. Arora J.S. (1990), ‘Computational design optimization: A review and

future directions’, Structural Safety, Vol. 7, pp. 131-148.

9. Badie M.A., Mahdi A., Abutalib A.R., Abdullah E.J.

and Yonus R.

(2006), ‘Automotive composite driveshafts: investigation of the design

variables effects’ International Journal of Engineering and Technology,

Vol. 3, No. 2, pp. 227-237.

10. Bauchau, O.A., Krafchack, T.M. and Hayes, J.F. (1998), ‘Torsional

Buckling Analysis and Damage Tolerance of Graphite/Epoxy Shafts’

International Journal of Composite Materials, Vol.22, pp. 258-270.

172

11. Beardmore P. and Johnson C.F. (1986), ‘The Potential for Composites

Structural Automotive Applications’, Composites Science and

Technology, Vol. 26, pp. 251-281.

12. Belegundu A.D. and Arora J.S. (1981), ‘Potential of Transformation

Methods in Optimal Design’, AIAA Journal, Vol. 19, No. 10,

pp. 1372-1374.

13. Belegundu A.D. and Rajan S.D. (1988), ‘Shape Optimization approach

based on natural design variables and shape function’, Computer

Methods in Applied Mechanics and Engineering, Vol. 66, pp. 87-106.

14. Belegundu A.D. and Chandrupatla T.R. (2003), ‘Optimization

Concepts and Applications in Engineering’, Pearson Education, New

Delhi.

15. Bendsoe M.P. and Mota Soares C.A. (1993), ‘Topology Design of

Structures’, Kluwer Academic Publishers, Netherlands.

16. Ben-Haim Y. and Elishakoff I. (1990), ‘Convex Models of Uncertainty

in Applied Mechanics’, Elsevier Science Publishers, Amsterdam.

17. Bert C.W. and Kim C.D. (1995), ‘Analysis of Buckling of Hollow

Laminated Composite Drive Shafts’, Composites Science and

Technology, Vol. 53, pp. 343-351.

18. Biagi M. and Medico D.F. (2008), ‘Reliability-based knockdown

factors for composite cylindrical shells under axial compression’

Journal of Thin Walled Structures, doi:10.1016/j.tws.2008.03.012.

19. Borri A. and Speranzini E. (1993), ‘Multi criteria optimization of

laminated composite material structures’, Meccanica, Vol. 28,

pp. 233-238.

20. Breitung, K., (1989), ‘Asymptotic Approximations for Probability

Integrals,’ Probabilistic Engineering Mechanics, Vol. 4, pp. 187-190.

21. Breitung, K. and Faravelli, L., (1996), ‘Response surface methods and

asymptotic approximations, in Mathematical Models for Structural

Reliability’, CRC Press, Boca Raton, FL, chap. 5, pp. 237-298.

22. Broudiscou C., Masmoudi M. and Guillaume P.H. (1995), ‘Application

of Automatic Differentiation to optimal shape design’, Advances in

Structural Optimization. Kluwer Academic Publishers, Netherlands.

pp. 413-446.

173

23. Bucher C.G. (1988), ‘Adaptive sampling—an iterative fast Monte

Carlo procedure’, Journal of Structural Safety, Vol. 5, pp. 19-126.

24. Buhl T., Pedersen C.B.W., and Sigmund O. (2000), ‘Stiffness design

of geometrically nonlinear structures using topology optimization’,

Structural and Multidisciplinary Optimization, Vol. 19, pp. 93-104.

25. Byeng D.Y. and Choi K.K. (2004), ‘A new response surface

methodology for reliability-based design optimization’, Journal of

Computers and Structures, Vol. 82, pp. 241-256.

26. Cai G.Q. and Elishakoff I. (1994), ‘Refined second-order reliability

analysis’, Journal of Structural Safety, Vol. 14, pp. 267-276.

27. Chandu S. and Grandi R. (1995), ‘General purpose procedure for

reliability based structural optimization under parametric uncertainties’

Journal of Adv Engng Softw, Vol. 23, pp. 7-14.

28. Chang C.C. and Yang H.T.Y. (1991), ‘Reliability of flexible laminated

plate under random in-plane loads’, In: Tsai SW, Springer GS, editors

Composites design, manufacture and applications, Proceedings of

ICCM VIII, Honolulu, Standford University, pp. 26-L-1-26-L-10.

29. Chao L.P. (1996), ‘Multiobjective optimization design methodology

for incorporating manufacturing uncertainties in advanced composite

structures’, Journal of Engineering Optimization, Vol.25, pp. 309-323.

30. Chen X.C., Hasselman T.K. and Neill D.J. (1997), ‘Reliability based

structural design optimization for practical applications’, In

Proceedings of the 38th

AIAA /ASME/ASCE/AHS/ASC Structures,

Structural Dynamics, and Materials Conference, number

AIAA-97-1403, pp. 2724-2732.

31. Chen X., Hasselman T.K. and Neil D.J. (1997), ‘Reliability based

structural design optimization for practical applications’, Proc.38th

AIAA/ ASME/ ASCE /AHS /ASC Structures Structural Dynamics and

Material Conference, Kissimmee, Florida, AIAA-97-103.

32. Cheng S. et al (1980), ‘Stability of Heterogeneous Aelotropic

Cylindrical Shells under Combined Loading’, AIAA Journal, Vol. 1,

No. 4, pp. 892-898.

174

33. Chen W. and Du X. (2002), ‘Sequential optimization and reliability

assesment method for efficient probabilistic design’, In ASME Design

Engineering Technical Conferences and Computers and Information in

Engineering Conference, number DETC2002/DAC-34127, Montreal,

Canada.

34. Choi K.K. and Youn B.D. (2002), ‘Investigation of the nonlinearity of

reliability-based design optimization’, In: 28th ASME Design

Automation Conference, September 30–October 2, Montreal, Canada.

35. Choi K.K. and Youn B.D. (2002), ‘On probabilistic approaches for

reliability-based design optimization’, In: 9th AIAA/

NASA/USA/ISSMO Symposium on Multidisciplinary Analysis and

Optimization, September 4–6, Atlanta, GA, USA.

36. Choi K.K., Youn B.D. and Du L. (2004), ‘Enriched performance

measure approach and its numerical method for reliability-based

design optimization’, 10thAIAA/ ISSMO Symposium on

Multidisciplinary Analysis and Optimization, AIAA-2004-4401,

Albany, New York.

37. Cruse T.A., Wu Y.T., Dias J.B. and Rajagopal K.R. (1988),

‘Probabilistic structural analysis methods and applications’, Journal of

Computer and Structures, Vol. 30, pp. 163-170.

38. DARWIN User’s Guide (2006), Southwest Research Institute, San

Antonio, TX.

39. Davidson J.W., Felton L.P. and Hart G.C. (1980), ‘On reliability-based

structural optimization for earthquakes’, Journal of Computer and

Structures, Vol. 12, pp. 99-105.

40. Deb K. (2001), ‘Multi-objective Optimization Using Evolutionary

Algorithms’, John Wiley & Sons, LTD, Chichester, England.

41. Deb K. (2003), ‘Optimization for Engineering Design’, Prentice-Hall

of India, New Delhi, pp. 320-325.

42. Doltsinis I. and Rodic T. (1999), ‘Process design and sensitivity

analysis in metal forming’, Numerical Methods in Engineering,

Vol. 45, pp. 661-692.

175

43. Dos Reis H.L.M., Goldman R.B. and Verstrate P.H. (1987), ‘Thin

Walled Laminated Composite Cylindrical Tubes: Part III-Critical Speed

Analysis, Journal of Composites Technology and Research, Vol. 9,

pp. 58-62.

44. Du X. and Chen W. (2004), ‘Sequential Optimization and Reliability

Assessment method for efficient probabilistic design’ Int. Journal of

Mechanical Design, Vol. 126, pp. 225-233.

45. Dubois D. and Prade H. (1988), ‘Possibility Theory: An approach to

Computer Processing of Uncertainty’, Plenum Press, NY.

46. Eberhart R.C. and Shi Y. (2001), ‘Particle Swarm Optimization:

Developments, Applications and Resources’, Proceedings of the IEEE

Congress on Evolutionary Computation, Vol. 1, pp. 27-30.

47. Elishakoff I., Haftka R.T. and Fang J. (1994), ‘Structural design under

bounded uncertainty-optimization with anti-optimization’, Computers

and Structures, Vol. 53, pp. 1401-1405.

48. Enevoldsen I. and Sorensen J.D. (1994), ‘Reliability-based

optimization on structural engineering’, Structural Safety’, Vol. 15,

No. 3, pp.169-196.

49. Engelbrecht A.P. (2007), ‘Computational Intelligence- An

introduction’, John Wiley & Sons, England.

50. Enright M.P. and Frangopol D.M. (1998), ‘Service-life prediction of

deteriorating concrete bridges’ ASCE Journal of Structural

Engineering, Vol. 124, pp. 309-317.

51. Enright M.P. and Frangopol D.M. (1999), ‘Reliability-based condition

assessment of deteriorating concrete bridges considering load

redistribution’, Journal of Structural Safety, Vol. 2, pp. 159-195.

52. Faust H. et al (1990), ‘A Compressive Rotor Shaft For Chinook’,

American Helicopter society’, Vol. 26, pp. 251-281.

53. Fedrizzi M., Kacprzyk J. and Yager R.R. (1994), ‘Advances in

Dempster-Shafer Theory of Evidence’. John Wiley & Sons Inc.

54. Feng Y.S. and Moses F. (1986), ‘Optimum design, redundancy and

reliability of structural systems’, Journal of Computers and Structures,

Vol. 24, pp. 239-251.

176

55. Fogel D. and Ghozeil A. (1996), ‘Using fitness distribution to design

more efficient evolutionary computations’, Proceedings of the III IEEE

Conference on Evolutionary Computation, IEEE Press, Nagoya,

pp. 11-19.

56. Fogel L.J. (1962), ‘Autonomous Automata’, Industrial Research,

Vol.4, pp. 14-19.

57. Fogel D.B., Fogel L.J. and Atmar J.W. (1991), ‘Meta-Evolutionary

Programming’, In Proceedings of the Twenty-Fifth Conference on

Signals, Systems and Computers, pp. 540-545.

58. Fogel D.B. (2000), ‘Applying Fogel and Burgin’s Competitive Goal-

Seeking through Evolutionary Programming to Coordination, Trust,

and Bargaining Games’, Proceedings of the IEEE Congress on

Evolutionary Computation, Vol. 2, pp. 1210-1216.

59. Fox R.L. (1971), ‘Optimization Methods for Engineering Design’,

Addison Wesley, MA.

60. Frangopol D.M. (1997), ‘How to incorporate reliability in structural

optimization’ In: ASCE manual on engineering practice No 90: Guide

to structural optimization. New York, ASCE, pp. 221-235.

61. Frangopol D.M. and Maute K. (2003), ‘Life – cycle reliability – based

optimization of civil and aerospace structures’, International Journal of

Computers and Structures, Vol. 81, pp. 397-410.

62. Frangopol D.M. and Estes A.C. (1998), ‘RELSYS: A computer

program for structural system reliability’, Journal of Structural

Engineering and Mechanics, Vol. 6, pp. 901-919.

63. Fred Moses, (1997) ‘Problems and prospects of reliability-based

optimization’, Journal of Engineering Structures, Vol. 19 No. 4

pp. 293-301.

64. Gabor R. and Ekart A., (2003), ‘Genetic Algorithms In Computer

Aided Design’, Journal of Computer-Aided Design, Vo.35,

pp.709- 726.

65. Ganapathi.M and Varadan T.K., (1994), ‘Nonlinear Free Flexural

Vibrations of Laminated Circular Cylindrical Shells’, Journal of

Composite Structures, Vol. 30, pp. 33-49.

177

66. Gerhard V. and Haftka R.T. (1998), ‘Using response surface

methodology in fuzzy set based design optimization’, Technical report,

AIAA-98-1776.

67. Goldberg D.E. and Deb K. (1991), ‘A Comparison of Selection

Schemes used in Genetic Algorithms’, In G.J.E. Rawlins, editor,

Foundations of Genetic Algorithms, Morgan Kaufmann, pp. 69-93.

68. Goldberg D.E. (2002), ‘Genetic Algorithms in search, optimization and

Machine learning’, Pearson Education Pvt. Ltd. New Delhi.

69. Grandhi R.V. and Wang L. (1998), ‘Reliability-based structural

optimization using improved two-point adaptive nonlinear

approximations’, Journal of Finite Elements Analysis Design, Vol. 29,

pp. 35-48.

70. Gu Y.X. and Cheng G.D. (1990), ‘Structural shape optimization

integrated with CAD environment’, Structural Optimization, Vol. 2,

pp. 23-28.

71. Guruvich M.R. (1993), ‘Reliability of reinforced plastics under thermal

loading’, Proceedings of ECCM 6- Sixth European conference on

composite materials, Bordeaux, France, pp. 355-360.

72. Haftka R.T. and Gurdal Z. (1992), ‘Elements of Structural

Optimization’, Kluwer Academic publishers 3rd

edition, Dordrecht.

73. Haftka R.T. and Walsh J.L. (1992), ‘Stacking-Sequence Optimization

For Buckling Of Laminated Plates By Integer Programming’, AIAA

Journal, Vol. 30, No. 3, pp. 274-279.

74. Haug E.J. and Arora J.S. (1979), ‘Applied Optimal Design’, Wiley,

New York.

75. Haldar A. and Mahadevan S. (2000), ‘Probability, Reliability and

Statistical Methods in Engineering Design’, John Wiley & Sons, New

York.

76. Haq N.A., Sivakumar K., Saravanan R. and Karthikeyan K. (2006),

‘Particle Swarm optimization (PSO) algorithm for optimal machining

allocation of clutch assembly’, Advanced Manufacturing Technology,

Vol. 27, pp. 865-869.

178

77. Harish A., Mozumder C.K., Renaud J.E. and Watson L.T. (2007), ‘An

inverse-measure-based unilevel architecture for reliability-based design

optimization’, Journal of Structural Multidisciplinary Optimization,

Vol. 33, pp. 217-227.

78. He Z., Wei C., Yang L., Gao X., Yao S., Eberhart R.C. and Shi Y.

(1998), ‘Extracting Rules from Fuzzy Neural Network by Particle

Swarm Optimization’, In Proceedings of the IEEE Congress on

Evolutionary Computation, pp. 74-77.

79. Herakovich C.T. (1998), ‘Mechanics of fibrous composites’, John

Wiley & Sons, New York.

80. Hibbeler, R. C. (2003), Mechanics of Materials, SI Edition, Prentice

Hall, Upper Saddle River, New Jersey

81. Holland J.H. (1975), ‘Adaptation in Natural and Artificial Systems’,

University of Michigan Press, Ann Arbor.

82. Huibin L., Chen W. and Sudjianto A. (2006), ‘Relative Entropy Based

Method for Probabilistic Sensitivity Analysis in Engineering Design’

Journal of Mechanical Design, Vol. 128, pp. 326-336.

83. Jebakani D. and Paul Robert T. (2007), ‘Probabilistic Buckling

Analysis of Composite cylindrical shell using FEA’, Proceedings of

International conference on Advanced Materials and Composites

Thiruvananthapuram.

84. Jebakani D. and Paul Robert T. (2007), ‘Reliability Based Design

Optimisation of composite Laminates’, Proceedings of Second

National conference on Management Science and Practice, Chennai.

85. Jinghong L., Mourelatos Z.P. and Nikolaidis E. (2007), ‘A

single-loop approach for system reliability-based design optimization’,

Journal of Mechanical Design, Vol. 129, pp. 1215-1224.

86. Johnson R.C. (1961), ‘Optimal Design of Mechanical Elements’,

Wiley Interscience, New York.

87. Jones B.H. (1985), ‘Probabilistic design and reliability’, (Eds.) In:

Chamis C.C., Composite materials, Ch. 8, Structure Design and

Analysis, Part II. New York: Academic Press, pp. 33-72.

88. Jones R.M. (1990), ‘Mechanics of composite material’, 2e, McGraw

Hill publishing company, New York.

179

89. Jun Z. and Mourelatos Z.P. (2008), ‘A Sequential Algorithm for

Possibility-Based Design Optimization’, Journal of Mechanical

Design, Vol. 130, DOI:10.1115/1.2803250.

90. Karamchandani A., Bjerager P. and Cornell C.A. (1989), ‘Adaptive

importance sampling’, in Proceedings of 5th International Conference

on Structural Safety and Reliability, New York, pp. 855-862.

91. Kaw A.K. (2005), ‘Mechanics of Composite Material’, CRC Press,

New York.

92. Kaymaz I. and McMahon C.A. (2004), ‘A probabilistic design system

for reliability-based design optimization’, Journal of Structural

Multidisciplinary Optimization, Vol. 28, pp. 416-426.

93. Kennedy J. and Eberhart R.C. (1995), ‘Particle Swarm Optimization’,

In Proceedings of the IEEE International Joint Conference on Neural

Networks, pp. 1942-1948.

94. Kennedy J. and Mendes R. (2002), ‘Population Structure and Particle

Performance’, In Proceedings of the IEEE Congress on Evolutionary

Computation, pp. 1671-1676.

95. Khalessi M.R., Lin H.Z. and Trent D.J. (1993), ‘Development of the

FEBREL finite element-based reliability computer program, Collection

of Technical Papers’ – AIAA/ ASME Structures, Structural Dynamics

and Materials Conference, 34thAIAA/ASME/ASCE/AHS/ASC

Structures, Structural Dynamics and Materials Conference, Apr 19-22

1993, La Jolla, CA, pp. 753-761.

96. Kharmanda G., Mohamed A. and Lemaire M. (2002), ‘Efficient

reliability based design optimization using a hybrid space with

application to finite element analysis’ Int. Journal of Structural

Multidisciplinary Optimization, Vol. 24, pp. 233-245.

97. Kharmanda G. and Olhoff N. (2004) ‘Reliability-based topology

optimization- A research paper’, Journal of Structural Multidisc

optimization, Vol. 26, pp. 295-307.

98. Kim J.K., Lee D.G. and Cho D.H. (2001), ‘Investigation of Adhesively

Bonded Joints for Composite Propeller shafts’, Composite Materials

Vol. 35, No. 11, pp. 999-1021.

99. Kim, C.D et.al, (1992) ‘Critical Speed Analysis of Laminated Drive

Shafts’, Composites Engineering, Vol. 3, pp. 633-643.

180

100. Kim H.S. and Lee D.G. (2005), ‘Optimal design of the press fit joint

for a hybrid aluminum/composite drive shaft’, International Journal of

Composite Structures, Vol.70, pp. 33-47.

101. Kim J.K., Lee D.G. and Cho D.H. (2001), ‘Investigation of adhesively

bonded joints for composite propeller shafts’, International Journal of

Composite Materials, Vol. 35, pp. 999-1019.

102. Kim K.J. and Diwekar U.M. (2002), ‘Efficient combinatorial

optimization under uncertainty algorithmic development,’ Industrial

Engineering Chemical Research, Vol. 41, pp. 1276-1284.

103. Kirsch U. (1989), ‘Optimal Topologies of Structures’, Applied

Mechanics Rev, Vol. 42, No. 8, pp. 223-239.

104. Kogiso N., Shao S. and Murotsu Y. (1997), ‘Reliability-based

optimum design of a symmetric plate subject to buckling’, Journal of

Structural Optimization, Vol. 14, pp. 184-192.

105. Koyluolu H.U. and Nielsen S.R.K. (1988), ‘New approximations for

SORM integrals’, Journal of Structural Safety, Vol. 5, pp. 119-126.

106. Kuei-Yuan C., Steven J. Skerlos and Panos Papalambros (2007), ‘An

Adaptive Sequential Linear Programming Algorithm for Optimal

Design Problems with Probabilistic Constraints’, Journal of

Mechanical Design, Vol. 129, pp. 140-149.

107. Kuschel N. and Rackwitz R. (2000), ‘Optimal design under time-

variant reliability constraints’, Structural Safety, Vol. 22, pp. 113-127.

108. Lam K.Y. and Toy, (1995),’Influence of boundary conditions and fiber

orientation on the natural frequencies of thin orthotropic laminated

cylindrical shells’, Journal of Composite Structures

Vol. 31, pp. 21-30.

109. Lancaster P. and Salkauskas K. (1986), ‘Curve and surface fitting; an

introduction’ Academic Press, London.

110. Law A.M. and Kelton W.D. (2004), ‘Simulation Modeling and

Analysis’, Tata McGraw-Hill Publishing company Ltd., New Delhi.

111. Lee K.H., Eom I.S., Park G.J. and Lee W.I. (1996), ‘Robust design for

unconstrained optimization problems using the Taguchi method’,

AIAA Journal, Vol. 34, pp. 1059-1063.

181

112. Lee D.G. et al (2004), ‘Design and Manufacture of an Automotive

Hybrid Aluminum/Composite Drive Shaft’, Composite Structures,

Vol. 63, pp. 87-89.

113. Lee T.S. Ting T.O. Lin Y.J. and Than Htay (2006), ‘A particle swarm

approach for grinding process optimization analysis’, Advanced

Manufacturing Technology, DOI 10.1007/s00170-006-0538-y.

114. Lee, D.G., (1995),’Calculation of Natural Frequencies of Vibration of

Thin Orthotropic Composite Shells By Energy Method’, Journal of

Composite Materials, Vol. 31, pp. 21-30.

115. Leverant G.R., McClung R.C., Millwater H.R. and Enright M.P.

(2003), A new tool for design and certification of aircraft turbine

rotors, Journal of Engineering for Gas Turbines and Power, ASME,

Vol. 126, No. 1, pp. 155-159.

116. Lien-Wen Chen et al (1998), ‘The Stability Behavior of Rotating

Composite Shafts under Axial Compressive Loads’, Composite

Structures, Vol. , No. 41, pp. 253-263.

117. Lin S.C. (2000), ‘Reliability predictions of laminated composite plates

with random system parameters’, Journal of Probabilistic Engineering

Mechanics, Vol. 15, pp. 327-338.

118. Liu D., Choi K.K., Youn B.D. and Gorsich D. (2006), ‘Possibility-

Based Design Optimization Method for Design Problems With Both

Statistical and Fuzzy Input Data’, Journal of Mechanical Design,

Vol. 128, pp. 928-935.

119. Lombardi M. and Haftka R.T. (1998), ‘Anti-optimization technique

for structural design under load uncertainties’, Computer Methods in

Applied Mechanics and Engineering, Vol. 57, pp. 19-31.

120. Madsen H.O., Krenk S. and Lind N.C. (1986), ‘Methods of structural

safety’. Englewood Cliffs, NJ: Prentice-Hall.

121. Maekawa Z., Hamada H., Horino T. and Nakayasu H. (1988),

‘Probabilistic design of fiber reinforced polymers using first-order

second moment method’, In: Paipetis S.A. Papanicolau G.C., Editors,

Engineering Applications of new composites, Wallingford, Omega

Scientific, pp. 153-161.

182

122. Mahadevan S. and Dey A. (1997), ‘Adaptive Monte Carlo simulation

for time-variant reliability analysis of brittle structures’, AIAA Journal,

Vol. 35, pp. 321-326.

123. Mahadevan S. and Liu X. (1998), ‘Probabilistic optimum design of

composite laminates’ Journal of Composite Materials, Vol. 32,

pp. 68-82.

124. Mahadevan S. and Raghothamachar P. (2000), ‘Adaptive simulation

for system reliability analysis of large structures’, Journal of

Computers and Structures, Vol. 77, pp. 725-734.

125. Mahadevan S. and Ramesh R. (2006), ‘Inclusion of Model Errors in

Reliability-Based Optimization’, Journal of Mechanical Design,

Vol. 128, pp. 936-944.

126. Mallick P.K. and Newman (1990), ‘Composite Materials Technology’,

Hanser publishers, Ohio, USA.

127. Mavris D.N. and DeLaurentis D. (1998), ‘A stochastic design approach

for aircraft affordability’. In: 21st Congress of the International

Council on the Aeronautical Sciences. ICAS.

128. McDonald M. and Mahadevan S. (2008), ‘Design Optimization With

System-Level Reliability Constraints’, Journal of Mechanical Design,

Vol. 130, DOI: 10.1115/ 1.2813782.

129. McDonald M. and Mahadevan S. (2008), ‘Reliability-Based

Optimization with Discrete and Continuous Decision and Random

Variables’ Journal of Mechanical Design, Vol. 130, DOI: 10.1115/

1.2898873.

130. McWilliam S. (2000), ‘Anti-optimisation of uncertain structures using

interval analysis’, Computers and Structures, Vol. 79, pp. 421-430.

131. Melchers R.E. (1989), ‘Improved importance sampling methods for

structural system reliability calculation’ in Proceedings of International

Conference on Structural Safety and Reliability, (ICOSSAR),

pp. 1185-1192.

132. Miki M., Murotsu Y. and Shao S. (1993), ‘Optimum fiber orientation

angle of multiaxially laminated composites based on reliability’, AIAA

Journal, Vol. 31, pp. 919-920.

183

133. Miki M., Murotsu Y., Tanaka T. and Shao S. (1997), ‘Reliability-based

optimization of fibrous laminated composites’, Journal of Reliability

Engineering and System Safety, Vol. 56, pp. 285-290.

134. Mitteau J.C. (1996), ‘Error Estimates for FORM and SORM

Computations of Failure Probability’, In Proceedings of the 7th ASCE

Specialty Conference on Probabilistic Mechanics and Structural

Reliability, pp. 562-565.

135. Mohsine G. Kharmanda and A. El-Hami (2006), ‘Improved hybrid

method as a robust tool for reliability-based design optimization’,

Journal of Structural Multidisciplinary Optimization, Vol. 32,

pp. 203-213.

136. Montgomery D.C. (2001), ‘Design and Analysis of Experiments’, John

Wiley Inc, New York.

137. Mutasher S.A., Sahari B.B. and Hamouda A.M.S., Sapuan S.M.,

(2005), ‘Static Torsion Capacity of a Hybrid Aluminum Glass Fiber

Composite Hollow Shaft’, American Journal of Applied Sciences

(Special Issue): Vol. 67-71.

138. Naka S., Genji T., Yura T. and Fukuyama Y. (2001), ‘Practical

Distribution State Estimation using Hybrid Particle Swarm

Optimization’, In IEEE Power Engineering Society Winter Meeting,

Vol. 2, pp. 815-820.

139. Nikolaidis E., Ghiocel D.M. and Singhal S. (2008), ‘Engineering

Design Reliability Applications for Aerospace, Automotive and Ship

Industries’, CRC Press, New York.

140. Nshanian Y.S. and Pappast M. (1983), ‘Optimal Laminated Composite

Shells for Buckling and Vibration’, AIAA Journal, Vol. 21,

pp. 430-437.

141. Oberkampf W.L., Helton J.C., Joslyn C.A., Wojtkiewicz S. and

Ferson S. (2004), ‘Challenge problems: Uncertainty in system response

given uncertain parameters’, Journal of Reliability Engineering and

System Safety, Vol. 85, pp. 11-19.

142. Onkar A.K., Upadhyay C.S. and Yadav D. (2007), ‘Probabilistic

failure of laminated composite plates using the stochastic finite

element methods’, Composite Structures, Vol. 77, pp. 79- 91.

184

143. Palle T.C. and Michael J.B. (1982), ‘Structural reliability theory and it

applications’ Berlin, Heidelberg: Springer-Verlag.

144. Pantelides C.P. and Ganzerli S. (1998), ‘Design of trusses under

uncertain loads using convex models’, Structural Engineering,

Vol. 124, pp. 318-329.

145. Papadrakakis M., Lagaros N. and Tsompanakis Y. (1998), ‘Structural

optimization using evolution strategies and neural networks’,

Computer Methods in Applied Mechanics and Engineering, Vol. 156,

pp. 303-333.

146. Papalambras P.Y. and Wilde (1988), ‘Principles of Optimal Design’,

Cambridge University Press.

147. Park J.H., Hwang J.H., Lee C.S. and Hwang W. (2001), ‘Stacking

Sequence Design Of Composite Laminates For Maximum Strength

Using Genetic Algorithms’, Journal of Composite Structures, Vol. 52,

pp. 217-231.

148. Patricia L.H. (1990), ‘Demonstration of Supercritical Composite

Helicopter Power Transmission Shaft’, J. American Helicopter Society

Vol. 31, No. 1, pp. 23-28.

149. Paul Robert T. and Shahabudeen P. (2004), ‘Genetic algorithms for

cost-effective maintenance of reactor-regenerator system’, Int. Journal

of Advanced Manufacturing Technology, Vol. 23, pp. 846-856.

150. Peer E.S., van den Bergh F. and Engelbrecht A.P. (2003), ‘Using

neighborhoods with the guaranteed convergence PSO’, Proceedings of

the IEEE Swarm Intelligence Symposium, pp. 235-242.

151. Pettit C. and Grandhi R. (2000), ‘Multidisciplinary Optimization of

Aerospace Structures with High Reliability’, in Proceedings of 8th

ASCE Joint Specialty Conference on Probabilistic Mechanics and

Structural Reliability, ASCE, Reston, VA.

152. Philippidis T.P., Lekou D.J. and Aggelis D.G. (1999), ‘Mechanical

Property distribution of CFRP filament wound composites’, Composite

Structures, Vol. 45, pp. 41-50.

153. Philippidis T.P., Lekou D.J. and Kalogiannaki G.A. (2000), ‘On the

stochastic nature of thermomechanical properties in glass reinforced

polyester laminates’, Composite Structures, Vol. 49, pp. 293-301.

185

154. Pollard A (1989), ‘Polymer Matrix Composites in Driveline

Applications’, Composite Structures, Vol. 25, pp. 165-175.

155. Pu Y., Das, P.K. and Faulkner D. (1997), ‘A strategy for reliability-

based optimization’, Journal of Eng. Struct., Vol. 19, pp. 276-282.

156. Qiu Z. and Elishakoff I. (1998), ‘Antioptimization of structures with

large uncertain but non-random parameters via interval analysis’,

Computer Methods in Applied Mechanics and Engineering, Vol. 152,

pp. 361-372.

157. Qu X., Venkataraman S., Haftka R.T. and Johnson T.F. (2000),

‘Deterministic and reliability-based optimization of composite

laminates for cryogenic environments’. In: AIAA 2000-4760, 8th

AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary

Analysis and Optimization, September 6–8, 2000, Long Beach, CA.

158. Qu X. and Haftka R.T. (2004), ‘Reliability-based design optimization

using probabilistic sufficiency factor’, Journal of Structural

Multidisciplinary Optimisation, Vol. 27, pp. 314-325.

159. Rackwitz R., Augusti G. and Borii A. (1995), ‘Reliability and

Optimization of Structural Systems, Proc. IFIP WG 7.5 Working

Conference. Chapman & Hall, Assisi, Italy.

160. Rackwitz R. (2001), ‘Reliability analysis - a review and some

perspectives’, Structural Safety, Vol. 23, pp. 365-395.

161. Rajeev S. and Krishnamoorthy C.S. (1992), ‘Discrete Optimization Of

Structure Using Genetic Algorithms’, Journal of Structural

Engineering, ASCE, Vol. 118, pp. 1233-1250.

162. Ranganathan R. (1990), ‘Reliability Analysis and Design of structures’

Tata McGraw Hill, New Delhi.

163. Rangaswamy T. and Vijayarangan S. (2004), ‘Optimal sizing and

stacking sequence of composite drive shaft’, Material Science, Vol. 11,

No. 2, pp. 133-140.

164. Rao S.S. (1986), ‘Automated optimum design of wing structures: a

probabilistic approach’. Journal of Computers and Structures, Vol. 24,

pp. 799-808.

186

165. Rao S.S. (1987), ‘Optimum design of structures in a fuzzy

environment’, AIAA Journal, Vol. 25, pp. 1633-1636.

166. Rao S.S. (1992), ‘Reliability-Based Design’. McGraw-Hill, Inc.

167. Rao S.S. (1996), ‘Engineering Optimization’, 3rd

Edition, New Age

International publisher, New Delhi.

168. Rao S.S. and Berke L. (1997), ‘Analysis of uncertain structural

systems using interval analysis’, AIAA Journal, Vol. 35, No. 4,

pp. 727-735.

169. Rastogi N. (2004), ‘Design of Composite Drive Shaft for Automotive

Applications’, SAE Int. World Congress, Detroit, Michigan.

170. Ratnaweera A., Halgamuge S. and Watson H. (2003), ‘Particle Swarm

Optimization with Self-Adaptive Acceleration Coefficients’, In

Proceedings of the First International Conference on Fuzzy Systems

and Knowledge Discovery, pp. 264-268.

171. Riche R.L. and Haftka R.T. (1993), ‘Optimization of Laminate

Stacking Sequence for Buckling Load Maximization by Genetic

Algorithm’, AIAA Journal, Vol. 31, pp.951-956.

172. Richard F. and Perreux D. (2000), ‘A reliability method for

optimization of [+φ, - φ ] fiber reinforced composite pipes’, Journal of

Reliability Engineering & System Safety, Vol. 68, pp. 53-59.

173. Roux W.J., Stander N. and Haftka R.T. (1998), ‘Response surface

approximations for structural optimization’, International Journal of

Numerical Methods Engineering, Vol. 42, pp. 517-534.

174. Sakawa M. (1993), ‘Fuzzy Sets and Interactive Multi-objective

Optimization’, Plenum Press.

175. Schueller G.I. (2001), ‘Computational stochastic mechanics - recent

advances’, Computers and Structures, Vol. 79, pp. 2225-2234.

176. Serge Abrate, (1994), ‘Optimal Design of Laminated Plates and Shells’,

Journal of Composite Structures, Vol.29, pp.269-286.

177. Shahabudeen P. and Sivakumar G.D. (2008), ‘Algorithm for the design

of single-stage adaptive kanban system’, Int. Journal of Computer and

Industrial Engineering, Vol. 54, pp. 800-820.

187

178. Shan S. and Wang G.G. (2008), ‘Reliable design space and complete

single-loop reliability-based design optimization’, Int. Journal of

Reliability Engineering and System Safety, Vol. 93, pp. 1218-1230.

179. Shao S. and Murotsu Y. (1991), ‘Optimum Fiber Orientation Angle of

Multiaxially Laminated Composites Based on Reliability’,

AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and

Materials conference, Washington DC, USA pp.1280-1287.

180. Shi Y. and Eberhart R.C. (1998), ‘A Modified Particle Swarm

Optimizer’, In Proceedings of the IEEE Congress on Evolutionary

Computation, pp. 69-73.

181. Shokrieh M.M., Hasani A. and Lessard L.B. (2004), ‘Shear buckling of

a composite drive shaft under torsion’, Int. Journal of Composite

Structures, Vol. 64, pp. 63-69.

182. Siddall J.N. (1972), ‘Analytical Decision Making in Engineering

Design’, Prentice Hall.

183. Somasundaram P. and Kuppusamy K. (2005), ‘Application of

evolutionary programming to security constrained economic dispatch’,

Int. Journal of Electrical Power and Energy Systems, Vol. 27,

pp. 43-351.

184. Sridhar J. and Rajendran C. (1996), ‘Scheduling in flowshop and

cellular manufacturing system with multiple objectives – a genetic

algorithmic approach’, Production Planning and Control, Vol. 7,

pp. 374-382.

185. Stroud W., Krishnamurthy T., Mason B., Smith S. and Naser A.

(2002), ‘Probabilistic design of a plate-like wing to meet flutter and

strength requirements’, in Proceedings of 43rd Structures, Structural

Dynamics and Materials Conference, AIAA 2002-1464, AIAA/ASCE/

AHS/ASC, Denver, CO.

186. Su B., Rais-Rohani M. and Singh M. (2002), ‘Reliability-based

optimization of anisotropic cylindrical shells with response surface

approximations of buckling instability’, In: AIAA 2002-1386, 43rd

AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and

Materials Conference, April 22–25, Denver, CO.

187. Suganthan P.N. (1999), ‘Particle Swarm Optimiser with Neighborhood

Operator’, In Proceedings of the IEEE Congress on Evolutionary

Computation, Washington DC, USA pp. 1958-1962.

188

188. Sun C.T. and Yamada S.E. (1978), ‘Strength distribution of a

unidirectional fiber composite’, International Journal of Composite

Materials, Vol.12, pp.169-76.

189. Tenn L.F. (1989) ‘Statistical analysis of fibrous composite strength

data’ In: Chamis CC, editor. Test methods and design allowables for

fibrous composites, ASTM STP 734, American Society for Testing

and Materials, pp.229-244.

190. Thanedar P.B. and Chamis C.C. (1995), ‘Reliability considerations in

Composite Laminate Tailoring’, Int. J Computers and Structures,

Vol. 54, pp. 131-139.

191. Thanedar P.B. and Kodiyalam S. (1992), ‘Structural optimization using

probabilistic constraint’, Int Journal of Structural Optimization, Vol. 4,

pp. 236-240.

192. Thoft-Christensen P. and Murotsu Y. (1986), ‘Application of Structural

Systems Reliability Theory’ Springer-Verlag, Berlin.

193. Tonon F. and Bernardini A. (1998), ‘A random set approach to the

optimization of uncertain structures’, Computers and Structures,

Vol. 68, pp. 583-600.

194. Tsui K.L. (1992), ‘An overview of Taguchi method and newly

developed statistical methods for robust design. IIE Transactions,

Vol. 24, pp. 44-57.

195. Tu J. and Choi KK. (1999), ‘A new study on reliability-based design

optimization’, Journal of Mechanical Design, Vol. 121, pp. 557-564.

196. Tu J., Choi K.K. and Park Y.H. (1999), ‘A New Study on Reliability-

Based Design Optimization’, Int. Journal of Mechanical Design,

Vol. 121, No. 4, pp. 557-564.

197. Tvedt L. (1990), ‘Distribution of quadratic forms in normal space-

application to structural reliability’, ASCE J. Eng. Mech., Vol. 116,

pp. 1183-1197.

198. Van den Bergh F. and Engelbrecht A.P. (2001), ‘Effects of Swarm

Size on Cooperative Particle Swarm Optimisers’, In Proceedings of the

Genetic and Evolutionary Computation Conference, San Francisco,

USA, pp. 892-899.

189

199. Van den Bergh F. and Engelbrecht A.P. (2006), ‘A Study of Particle

Swarm Optimization Particle Trajectories’, Information Sciences,

Vol. 176, pp. 937-971.

200. Venter G. and Haftka R.T. (1999), ‘Using response surface

approximations in fuzzy set based design optimization’, Structural

Optimization, Vol. 18, pp. 218-227.

201. Wang L. and Kodiyalam S. (2002), ‘An efficient method for

probabilistic and robust design with non normal distribution’,

Proceedings of AIAA/ASME/ASCE/AHS/ASC Structures, Structural

Dynamics conference, Denver, Colorado.

202. Weeton J.W. et al (1986), ‘Engineers guide to composite materials’,

American Society for Metal, New York.

203. Wu Y. and Wang T. (1998), ‘Efficient Probabilistic Design by

converting reliability constraints to approximately deterministic

constraint’, Int Journal of Integrated Design Process Science, Vol. 2,

pp. 13-21.

204. Wu Y.T., Millwater H.R. and Cruse T.A. (1990), ‘Advanced

probabilistic structural analysis method for implicit performance

functions’ AIAA Journal, Vol. 28, pp. 1663-1669.

205. Wu Y.T.(1998), NESSUS/FPI User’s and Theoretical Manuals,

Southwest Research Institute, San Antonio, TX.

206. Yang J.S., Nikolaidis E. and Haftka R.T. (1990), ‘Design of aircraft

wings subjected to gust loads: a system reliability approach’.

Computers and Structures, Vol. 36, pp. 1057-1066.

207. Yang L. and Ma Z.K. (1989), ‘Optimum design based on reliability for

composite laminate layup’, Computers and Structures, Vol. 31,

pp. 377-383.

208. Yang L. (1989), ‘Reliability of composite laminates’, Mechanical

Structures, Vol. 16, No. 4, pp. 523-536.

209. Yang R.J., Gu L., Tho C.H., Choi K.K. and Youn B.D. (2002),

‘Reliability-based multidisciplinary design optimization of a full

vehicle system’, Proceedings of 43rd Structures, Structural Dynamics,

and Materials Conference, AIAA 2002-1758, AIAA/ASCE/AHS/ASC,

Denver, CO.

190

210. Yang R.J., Chuang C., Gu L. and Li G. (2005), ‘Experience with

approximate reliability-based optimization methods II: an exhaust

system problem’, Structural Multidisciplinary Optimization, Vol. 29,

pp. 488-497.

211. Yang R.J. and Gu L. (2004), ‘Experience with approximate

reliability-based optimization methods’, Int. Journal of Structural

Multidisciplinary Optimization, Vol. 26, pp. 152-159.

212. Yang J.S. and Nikolaidis E. (1991), ‘Design of aircraft wings subjected

to gust loads: a safety index based approach’, AIAA Journal, Vol. 29,

pp. 804-812.

213. Yoshikawa N., Elishakoff I. and Nakagiri S. (1998), ‘Worst case

estimation of homology design by convex analysis’, Computers and

Structures, Vol. 67, pp. 191-196.

214. Youn B.D., Choi K.K. and Park Y.H. (2003), ‘Hybrid analysis method

for reliability-based design optimization’, Mechanical Design,

Vol. 125, pp. 221-232.

215. Youn B.D. and Choi K.K. (2004), ‘An investigation of nonlinearity of

reliability-based design optimization’, Mechanical Design, Vol. 126,

pp. 403-411.

216. Yu X., Choi K.K. and Chang K.H. (1997), ‘A mixed design approach

for probabilistic structural durability’, Structural Optimization,

Vol. 14, pp. 81-90.

217. Yuan K.C., Skerlos S.J. and Papalambros P. (2007), ‘An adaptive

sequential linear programming algorithm for optimal design problems

with probabilistic constraints’, Journal of Mechanical Design, Vol. 128

DOI: 10.1115/1.2337312.

218. Zang T.A., Hemsch M.J., Hilburger M.W., Kenny S.P.,

Luckring J.M., Maghami P., Padula S.L. and Stroud W.J. (2002),

‘Needs and opportunities for uncertainty-based multidisciplinary

design methods for aerospace vehicles’, NASA/ TM-2002-211462,

Langley Research Center, Hampton, Virginia, http://techreports.larc.

nasa. gov/ltrs.

219. Zhang J.H. and Xu X.H. (1999), ‘An efficient evolutionary algorithm’,

Int. Journal of Computers & Operations Research, 26: 645 - 663

191

220. Zhao Y. and Ono T. (1999), ‘A general procedure for first/second-

order reliability method (FORM/ SORM)’, Journal of Structural

Safety, Vol. 21, pp. 95-112.

221. Zheng Y. and Das T. (2000), ‘Improved response surface method and

its application to stiffened plate reliability analysis’, Journal of Engg.

Struct., Vol. 22, pp. 544-551.

222. Zhou M. and Haftka R.T. (1995), ‘A comparison of optimality criteria

methods for stress and displacement constraints. Computer Methods in

Applied Mechanicsand Engineering, Vol. 124, pp. 253-271.

223. Zissimos P.M. and Zhou J. (2006), ‘A Design Optimization Method

Using Evidence Theory’, Mechanical Design, Vol. 128, pp. 901-908.

224. Zou T. and S. Mahadevan (2006), ‘A direct decoupling approach for

efficient reliability-based design optimization’, Structural

Multidisciplinary Optimization, Vol. 31, pp. 190-200.

225. Zou T., Mahadevan S. and Sopory A. (2004), ‘A Reliability-based

design method using simulation techniques and efficient optimization

approach’, ASME Design Engineering Technical Conferences, Salt

Lake City, Utah, DETC2004/DAC-57457.

226. Zou T., Mahadevan S., Mourelatos Z. and Meernik P. (2002),

‘Reliability analysis of automotive body–door subsystem’, Journal of

Reliability Engineering and System Safety, Vol. 78, pp. 315-324.