ref list
DESCRIPTION
List of referencedTRANSCRIPT
Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. ActaMech. 71, 67-76.Christoforou, A. P. and Swanson, S. R. (1990). Analysis of simply-supported orthotropic cylindrical shellssubject to lateral impact loads. A S M E Trans. J. AppL Mech. 57, 376-382.Dobyns, A. L. (1981). Analysis of simply-supported orthotropic plates subject to static and dynamic loads.A I A A J. 19, 642-650.Dong, S. B. and Tso, F. K. W. (1972). On a laminated orthotropic shell theory including transverse sheardeformation. A S M E Trans. J. Appl. Mech. 39, 1091-1096.Donneil, L. H. (1933). Stability of thin walled tubes under torsion. N.A.C.A. Report. 479.Gong, S. W., Toh, S. L. and Shim, V. P. W. (1994). The elastic response of orthotropic laminated cylindricalshells to low velocity impact. Compos. Engng 4(2), 247-266.Greszczuk, L. B. (1982). Impact Dynamics. John Wiley, New York.Mindlin, R. D. (1951). Influence of rotary inertia and shear on flexural motions of isotropic, elastic plate.A S M E Trans. J. Appl. Mech. 18, 31-38.Moriwaki, T. (1978). Optimizing dynamic force in shock excitation testing. SME, Dearborn, MI, pp. 427-434.Ramkumar, R. L. and Thakar, Y. R. (1987). Dynamic response of curved laminated plates subjected to lowvelocity impact. A S M E Trans. J. Engng Mater. Tech. 109, 67-71.Reddy, J. N. (1984). A simple higher-order theory for laminated composite plates. A S M E Trans. J. Appl. Mech.51, 745-752.Reddy, J. N. and Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. Int. J.Engng Sci. 23(3), 319-330.Sun, C. T. and Chattopadhyay, S. (1975). Dynamic response of anisotropic laminated plates under initial stressdue to impact of a mass. A S M E Trans. J. Appl. Mech. 42, 693-698.Sun, C. T. and Liou, W. J. (1989). Investigation of laminated composite plates under impact dynamic loadingusing a three-dimensional hybrid stress finite element method. Comput. Struct. 33, 879-884.Tan, T. M. and Sun, C. T. (1985). Use of statical indentation laws in the impact analysis of laminated compositeplates. A S M E Trans J. AppL Mech. 52, 6-12.Timoshenko, S. et al. (1959). Theory o f Plates and Shells. McGraw-Hill, New York.Whitney, J. M. and Pagano, N. J. (1970). Shear deformation in heterogeneous anisotropic plates. A S M E Trans.J. AppL Mech. 37, 1031-1026.Wu, H.-Y. T. and Chang, F.-K. (1989). Transient dynamic analysis of laminated composite plates subjected totransverse impact. Comput. Struct. 31, 453-466.Wu, P. J. et al. (1983). Investigation of characteristics of the hammer tip and the force impulse signal. J. Shockand Vibration (China) 6, 58-6