reducing - globus · bespoke and innovative solutions to the most complex hand safety ... product...

2

Globus is a specialist and a leading provider of hand protection to the oil, gas and petrochemical sector.

Injuries to hands constitute nearly 50% of all health and safety incidents in the oil, gas and petrochemical industries and the knock-on effects are significant, not only to the individual but to the organisation too.

Protecting a workforce with an advanced hand protection solution from Globus can result in a reduction in accident rates, improved productivity, enhanced environmental credentials and robust, demonstrable commercial benefits.

IMPROVE THE PROFITABILITY OF YOUR OPERATIONS

Globus is a world leader in protecting hands and has established an enviable reputation for delivering bespoke and innovative solutions to the most complex hand safety problems faced by workers in the oil, gas and petrochemical sector.

Working in conjunction with Health and Safety teams, Globus can assist in building a bespoke hand protection policy that not just addresses hand safety issues, but one that can improve company productivity and also reduce costs.

REDUCING ACCIDENT RATESIMPROVING PRODUCTIVITYSAVING COSTS

CONFIDENTLY HANDLING THE CHALLENGES YOU FACE EVERY DAY

Workers in the oil, gas and petrochemical industry are exposed to a multitude of hazards on a daily basis, including blunt force impacts, abrasions, cuts and chemical burns. Despite the hazards, many trades are also constantly challenged to achieve reliable grip performance in wet and oily handling conditions.

Hand protection solutions from Globus can have a widespread effect on an employee’s performance as well as their safety. With the correct gloves being worn for the task and for the worker, hands are more likely to be correctly protected for entire shifts, thus boosting productivity and morale too.

CHEMICALS The potential risks to employees who are exposed to chemicals, even briefly, are vast. The skin can be greatly damaged by chemicals and wearing gloves is the only barrier that can prevent hazardous contact.

Chemical hazards are prevalent to workers on drilling platforms when drawing mud, oil and benzenes from the sea bed as well as in refineries. Experts from Globus can advise regarding glove suitability for specific chemicals.

THE ELEMENTS Industry workers can face extremely harsh and changeable weather conditions which can significantly impact the risk to the individual as well as the site.

Insulated liners are crucial for preserving dexterity and sensation to the hand and fingers in cold conditions. Advanced waterproof coatings repel rain and liquids, whilst innovative breathable membranes situated beneath the impermeable coating allow perspiration and warm air to escape at the same time.

SINGLE USE DURABLEPROTECTION

Versatile nitrile disposable gloves provide a strong barrier of protection against many petrochemicals. They are ideal for workers with a latex sensitivity and mould to the shape of the hand ensuring a secure and comfortable fit.

Single use nitrile gloves are up to four times more puncture resistant than standard latex alternatives and can also be worn under other work gloves to bolster protection against liquids.

VISIBILITY Gloves featuring hi-viz properties help to draw attention and distinguish the wearer from his or her immediate environment.

Not only can this enhance safety, it can also make hand signalling more efficient over distance.

The professionally manufactured gloves in the Globus portfolio are designed to meet the rigorous requirements of the oil, gas and petrochemical industry.

Each glove is constructed to enhance the wearer’s performance, allowing maximum dexterity and to protect in the harshest of conditions.

Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company. Dyneema® is a registered trademark of DSM Dyneema.

4 5

CUTS AND ABRASION

Cut hazards can lead to severe abrasions and lacerations to hands. Kevlar® and engineered composite yarns containing steel are woven into gloves to add resistance and perform in heavy duty environments.

Tests have demonstrated that gloves made with Dyneema® have up to twenty times better abrasion resistance than gloves made with Aramid yarns. Matching the appropriate level of cut protection to the hazard is crucial to maintain performance.

IMPACTS, CRUSHES AND PINCHES

Injuries from impacts form the majority of hand injuries to workers in the industry. Gloves featuring directly-injected Thermo Plastic Rubber (TPR) help protect the fingers, thumb, back of hand and knuckles.

TPR zones are critical in helping the user to free their hand from the glove if involved in an incident involving impact.

OIL GRIP Good glove grip is essential to provide the wearer with proper control over his or her working environment and help prevent serious injury.

Gloves featuring the latest high-tech coatings provide resistance to petrochemicals and contain efficient absorbency properties allowing greasy objects to be lifted, carried or assembled with confidence. Inadequate grip can motivate hand fatigue and also promote musculo-skeletal injuries as well as dermatological issues.

SOLUTIONS DESIGNED AROUND YOU

SIX STEPS TO BESPOKE HAND PROTECTION FROM GLOBUS

Re-trials

Introduction Terms of Reference

GloveSurvey

ProductTrials

Agreed Implementation

Process

Ongoing Support Package

1 2 3 4 5 6

As part of the GHPP, Globus will:

Conduct comprehensive site surveys

Consider all legal obligations

Provide detailed information and posters

Support sampling and trial programmes

Present ‘tool box’ awareness training

Monitor glove trials

Be available to assess hand incident reviews

Produce a bespoke solution report containing measurement criteria

It’s essential to ensure that a Globus hand protection solution adds value. Often the first step is to carry out an individually designed assessment of hand safety requirements – the Globus Hand Protection Programme (GHPP).

The aim of this bespoke programme is to deliver demonstrable compliance and best practice through interaction, evaluation and measurement, underpinned with training and a tailored

support package.

Aiding Compliance

Reducing Accident Rates

Supporting Cost Savings

Improving Productivity

Boosting Environmental Credentials

Benefits of the GHPP

6 7

CHEMICAL PROTECTION

Pages 15 - 17

CUT RESISTANTPROTECTION

Pages 21 - 23

THERMALPROTECTION

Pages 18 - 20

IMPACT PROTECTION

Pages 10 - 14

GENERAL HANDLING

Pages 24 - 28

HAND PROTECTION PRODUCT GUIDE

The Globus oil, gas and petrochemical portfolio features a range of innovative protective gloves constructed to endure the harshest of conditions. Globus is pleased to present a selection of styles that cover all the hazards that workers face in the industry.

8 9

� Drilling � Engineering � Heavy Construction � Maintenance � Rigging

� Deck Crew � Drillers � Engineer � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout

Typical Applications Suitable Trades

Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty

SKY862 SKY863 SKY864 SKY865 60

| TORQUE FLEX™



High-viz anti-impact glove with excellent grip and abrasion resistance. Unrivalled dexterity from an impact glove.


MATERIALS

KEY FEATURES � Durable double synthetic leather construction

� Dense, moulded TPR protection zones on knuckles, fingers,

thumb and back of hand

� Textured grip reinforced with Kevlar® applied to thumb and

index finger

� Oil and water resistant palm

� Hi-vis colour for hand signalling

� Anti-slip technology for enhanced cushioned grip

� Neoprene cuff resists snagging and offers a secure fit

� Anatomical design helps prevent hand fatigue

� Laminated polyester and PVC coating, synthetic leather, PU, nylon and synthetic leather palm.


SKY852 SKY853 SKY854 SKY855 60

EN388: 2003

3231Under certification

EN388: 2003

3231Under certification

| TORQUE STEALTH™

Anti-impact glove with excellent grip and abrasion resistance.

MATERIALS

KEY FEATURES � Durable double synthetic leather construction

� Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand

� Velcro fastening cuff

� Textured grip reinforced with Kevlar® applied to thumb and index finger

� Oil and water resistant palm


� Neoprene cuff resists snagging and offers a secure fit

� Black colouring extends wearable life

� Laminated polyester and PVC coating, synthetic leather, PU, nylon and leather palm.

10 11

IMPACT PROTECTION IMPACT PROTECTION

Thermal version also available - see Page 20

| DEEP GRIP™ KOOL


� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout

Featuring one less layer of fabric than the ‘Deep Grip’ model, Deep Grip Kool is a breathable, oil resistant glove with excellent grip and durability.


MATERIALS

KEY FEATURES � Soft and comfortable with enhanced breathability � Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and

Kevlar® stitched to withstand the harshest of environments � SkidX Grip™ provides excellent resistance to oil, water and petrochemicals

and heightened gripping power for wet, oily or dry surfaces � Extra layer of Kevlar® between thumb and forefinger � Designed to enable the hand to be withdrawn if caught in machinery

� Thermo Plastic Rubber, Kevlar®, Nylon liner.

CAT II

EN388: 2003

4342

Sizes and Product CodesM L XL XXL Case Qty

CSL092 CSL093 CSL094 CSL095 100

| DEEP GRIP™

� Drilling � Rigging � Engineering � Heavy Construction � Maintenance


Impact resistance and dependable grip, for the most harshest of handling environments.


MATERIALS

KEY FEATURES � Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and Kevlar® stitched to withstand the harshest of environments

� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and heightened gripping power for wet, oily or dry surfaces

� Reinforced with an extra layer of SkidX Grip™ between thumb and forefinger

� Long-cuff design bolsters protection, comfort and ‘tear-away’ ability � Easy-pull tabs allow personalisation and enable the glove to be

pulled on with ease

� Thermo Plastic Rubber, Kevlar®, Nylon liner.

CAT II

EN388: 2003

4342


CSL082 CSL083 CSL084 CSL085 100

| TORBEN™



Protects against blade cuts and impacts to the back of the hand without compromising comfort and dexterity.


MATERIALS

KEY FEATURES � Cut level 5 (EN388)

� Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand

� Oil and water resistant


� Nitrile coating provides chemical resistance

� Flat nitrile coating. Engineered yarn liner, latex padding.

EN388: 2003


SKY842 SKY843 SKY844 SKY845 120

| DEEP II™ GRIP


� Pipe Fitters � Mechanical Fitters � Riggers � Drillers � Roustabout � Deck Crew � Engineers

Breathable, oil resistant, excellent grip with enhanced impact resistance to knuckle area.


MATERIALS

KEY FEATURES � Single-piece 3D Thermo Plastic Rubber (TPR) � Double Kevlar® thread palm stitching for added durability � SkidX Grip™ provides excellent resistance to oil, water and petrochemicals

and heightened gripping power for wet, oily or dry surfaces � Extra layer of Kevlar® between thumb and forefingers � Easy-pull tabs allow personalisation and enable the glove to be pulled on

with ease � Reflective hi-viz properties for enhanced hand visibility

� Thermo Plastic Rubber, PU, Kevlar®, Nylon and Polyester liner

CAT II

EN388: 2003

4342


CSL102 CSL103 CSL104 CSL105 100

Under certification

Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company

12 13

IMPACT PROTECTION IMPACT PROTECTION

| 379

� Chemical Handling� Drilling� Maintenance � Painting

� Chemical Process Engineers� Drillers� Painters

Fully coated nitrile with a nitrile sponge palm providing excellent grip in wet and oily conditions whilst protecting from chemicals.


MATERIALS

KEY FEATURES � Impermeable� Protects the hand and forearm from oils, chemicals, grease and abrasion� Seamless for optimum comfort� Excellent wet and oil grip� Scalloped edge� Length: 30-32cm (depending on size)

� Nitrile foam coating on nitrile. Polyester / nylon knit liner.

CAT III

EN388: 2003 EN374-3: 2003 EN374-2: 2003

4122 JKL

| 660

� Chemical Handling

� Drilling

� Maintenance

� Painting

� Chemical Process Engineers

� Drillers

� Painters

These durable triple-dipped heavyweight PVC gloves are strong, yet extremely soft and flexible. They feature a soft comfortable cotton lining and the rough textured coating ensures grip and increases the glove’s abrasion resistance and durability. The gloves are chemical and oil resistant. Available in 3 different lengths.


MATERIALS

KEY FEATURES

� PVC coating. Cotton liner.

CAT III

EN388: 2003 EN374-3: 2003 EN374-2: 2003

4121 JKL

� Impermeable

� Excellent dexterity and durability

� Length: 30cm

� Rough surface enhances grip and durability

� Seamless for optimum comfort

� Antibacterial and anti-odour treatment

� Other length variants available: 34cm (660/34) and 36cm (660/36)

� Scalloped edge


SHO3792 SHO3793 SHO3794 SHO3795 60


SHO6602 SHO6603 SHO6604 SHO6605 120

| DEEP III SONIC 10

Oil and impact resistance with 3D sonic grip to maximise gripping power. Aero vents for breathable comfort.

MATERIALS

KEY FEATURES � Provides 10 different angles of grip on the palm surface to maximise gripping power

� Direct injection single-piece Thermo Plastic Rubber (TPR) adds pinch-point protection for fingertips

� Flexible protection shields enhances resistance against impacts � Elasticated long-cuff design helps prevent debris from entering the glove

whilst adding ‘tear-away’ ability � Easy-pull tabs allow personalisation and enable the glove to be pulled

on with ease

� Thermo Plastic Rubber, PU, Kevlar®, Nylon and Polyester.

� Construction � Maintenance � Rigging � Rope Access � Scaffolding

� Engineers � Maintenance � Pipe Fitters � Riggers � Rope Access � Scaffolders � Technicians


CAT II

EN388: 2003

4231

| DEEP III CUT 5



Maximum cut resistancy and powerful grip in oily and wet handling conditions.


MATERIALS

KEY FEATURES � Level 5 cut resistance (EN388)

� Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and Kevlar® stitched to withstand the harshest of environments

� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and heightened gripping power for wet, oily or dry surfaces

� Easy-pull tabs allow personalisation and enable the glove to be pulled on with ease

� Thermo Plastic Rubber, Nylon and Polyester liner

CAT II

EN388: 2003

4543


CSL062 CSL063 CSL064 CSL065 100


CSL112 CSL113 CSL114 CSL115 100

CUT LEVEL

5

Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company

14 15

CHEMICAL PROTECTIONIMPACT PROTECTION

| UTAH™

� Chemical Process � Engineering � Instrumentation � Laboratories� Maintenance� Mechanical� Painting

� Chemical Process Engineers � Engineers � Drillers � Instrument Technicians � Mechanical Fitters � Pipe Fitters

High performance, powder-free, nitrile single use disposable glove. Significantly stronger alternative to latex.


MATERIALS

KEY FEATURES

� Nitrile

� Comfortable with a ‘second skin’ feel� Resistant to oils, acids and many

chemicals� Category III, EN374 and EN455

approved� AQL 1.5

� Powder-free� Textured finish for grip and touch� Thickness 0.10mm

CAT III

EN374-3: 2003 EN374-2: 2003

Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty

SKYUTAH1 SKYUTAH2 SKYUTAH3 SKYUTAH4 10 boxes, 100 singles per box

| 720

� Chemical Handling� Drilling� Maintenance� Painting

� Chemical Process Engineers� Drillers� Painters

A fine, supple glove offering high resistance to chemicals and excellent protection against abrasion. For demanding tasks that require manual exertion and complete control over work materials in wet handling conditions.


MATERIALS

KEY FEATURES � Exceptional durability, flexibility, dexterity and comfort

� Thickness: 1mm

� Impermeable

� Length: 30cm

� Nitrile coating. Nylon / polyester liner.

CAT III

EN388: 2003 EN374-3: 2003 EN374-2: 2003

3132 AJKL

Sizes and Product Codes7/S 8/M 9/L 10/XL 11/XXL Case Qty

SHO7201 SHO7202 SHO7203 SHO7204 SHO7205 120

| TEAL™

� Chemical Process � Engineering � Instrumentation � Laboratories � Maintenance� Mechanical � Painting

� Chemical Process Engineers� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Painters� Pipe Fitters

Premium performance, powder-free, nitrile single use disposable glove. Extremely strong and offers greater chemical and puncture resistance than regular nitrile disposables.


MATERIALS

KEY FEATURES

� Nitrile

� Premium performance NBR nitrile disposable gloves� Resistant to oils, acids and many

chemicals� Up to four times the puncture

resistance of latex� Powder-free

� Lightweight and comfortable with a ‘second skin’ feel� Textured fingertips for a secure grip� Category III, EN374 and EN455

approved� AQL 1.5� Thickness 0.12mm

CAT III

EN374-3: 2003 EN374-2: 2003


SKYTEAL1 SKYTEAL2 SKYTEAL3 SKYTEAL4 10 boxes, 100 singles per box



� Scalloped edge

| BEST N-DEX 7700PFT NIGHTHAWK®

� Chemical Process � Engineering � Instrumentation � Laboratories � Maintenance� Mechanical � Painting

� Chemical Process Engineers� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Painters� Pipe Fitters

100% Accelerator-free nitrile single use disposable glove. Extremely durable with textured fingertips.


MATERIALS

KEY FEATURES

� Nitrile

� Premium performance nitrile disposable gloves� Protects against a wide array of

chemical hazards� Cuff prevents debris from entering

the glove� Powder-free, latex-free

� Lightweight and comfortable with a ‘second skin’ feel� Antistatic properties� Thickness 0.10mm� Length: 24cm

CAT III

EN374-3: 2003 EN374-2: 2003


BST77001 BST77002 BST77003 BST77004 20 boxes, 50 singles per box

16 17

CHEMICAL PROTECTION CHEMICAL PROTECTION

Non-thermal version also available - see Page 24

| 477

� Drilling� Engineering � Heavy Construction� Helideck� Maintenance� Rigging

� Crane Operators � Deck Crew � Drillers � Engineers� Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

Premium combination of cold protection and oil resistant grip. Insulated liner protects from cold ensuring warmth and comfort all day long whilst the dual nitrile coating technology provides long lasting grip in wet and oily conditions.


MATERIALS

KEY FEATURES � Impermeable double-engineered nitrile coating

� Fixed, insulated liner

� Highly flexible and resistant to abrasion and tearing

� Wrist well protected


� Full nitrile coating combined with nitrile foam. Polyester / nylon knit / acrylic liner.

CAT II

EN388: 2003 EN511: 2006

4231 011

Sizes and Product Codes7/M 8/L 9/XL Case Qty

SHO4772 SHO4773 SHO4774 60

| 451

� Drilling� Engineering� Heavy Construction� Helideck � Maintenance� Rigging

� Crane Operators � Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

This cold weather grip glove offers a warm, light-weight feel. The rough textured latex grip allows slippery objects to be gripped firmly. This durable glove is ideal for manual handling in cold weather conditions.


MATERIALS

KEY FEATURES � Excellent grip

� Insulated liner

� Protects the hand in damp environments or against aggressive detergents or alcohols

� Breathable back of hand


� Natural latex coating. Acrylic / cotton / polyester knit liner.

CAT II

EN388: 2003 EN511: 2006

2241 010


SHO4511 SHO4512 SHO4513 SHO4514 120

THERMAL PROTECTION THERMAL PROTECTION

| 282 TEMRES

Featuring breathable technology, 282 TEMRES features an engineered breathable membrane fixed between the coating and insulated liner. The result is warmth and protection from liquids in cold conditions, with the comfort of a breathable glove.

MATERIALS

KEY FEATURES � Breathable technology allows warm air and moisture from inside to escape � Micro roughened coating finish provides excellent grip� Impermeable coating prevents ingress from water and liquids� Fixed, insulated liner� Premium comfort and flexibility of polyurethane� Wrist well protected

� Micro-ventilated polyurethane coating. Nylon / acrylic liner.

� Drilling� Engineering � Heavy Construction � Helideck � Maintenance � Rigging

� Crane Operators � Deck Crew � Drillers � Engineers� Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout


CAT II

EN388: 2003 EN511: 2006

4221 021


SHO2822 SHO2823 SHO2824 SHO2825 60

RESISTS COLDTEMPS

WATERPROOF DUAL COATINGTECHNOLOGY

18 19

| NINJA KNIGHT™

� Engineering

� Fabrication

� Insulation

� Machining

� Maintenance

� Electricians

� Insulators

� Pipe Fitters

� Process Engineers

Extremely durable and delivering maximum resistance to cuts, abrasion, tearing and punctures without compromising dexterity, sensitivity and comfort. The bi-polymer coating ensures excellent grip in wet and dry handling conditions.


MATERIALS

KEY FEATURES � Maximum EN388 mechanical protection of 4-5-4-4

� Retains flexibility despite its high protection levels

� Excellent grip in wet and dry environments

� Superb dexterity and sensitivity - even the most precise of task can be completed

� Elasticated wrist provides a secure and comfortable fit

� Bi-polymer coating. HPPE/glass yarn liner.

CAT II

EN388: 2003

4544

CUT LEVEL

5

| SAPPHIRE™

� Engineering� Fabrication� Instrumentation � Insulation � Machining� Maintenance

� Electricians � Instrument Technicians � Insulators� Process Engineers� Pipe Fitters

Flexibility and dexterity are guaranteed with the ultra lightweight Sapphire cut level 3 glove. The 18 gauge liner and thin palm-dipped PU coating combine to deliver a cut resistant barrier that is ideal for the superior precision handling of sharp components in light oil and dry conditions.


MATERIALS


� Offers a combination of comfort, dexterity and cut resistance

� Secure grip in light oily, greasy and dry conditions

� Excellent resistance to abrasion and tears for extended durability

� Elasticated wrist provides a secure and comfortable fit

� Breathable back to glove to minimise perspiration

� Polyurethane coating. HPPE/glass yarn liner.

CAT II

EN388: 2003

4342

CUT LEVEL

3


SKY271 SKY272 SKY273 SKY274 SKY275 120


SKY661 SKY662 SKY663 SKY664 120

THERMAL PROTECTION CUT RESISTANT PROTECTION

| ARGON™

� Drilling� Engineering� Heavy Construction� Helideck� Maintenance � Rigging

� Crane Operators � Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

Featuring a soft, thermal lining and a durable HPT foam coating that extends across the knuckles, Argon provides excellent warmth, grip and protection even in damp environments.


MATERIALS

KEY FEATURES � Durable glove that remains flexible to temperatures as low as –50ºC� HPT foam coating extends across the palm, knuckles and fingers

to provide greater protection even in wet environments� Double insulated and soft lining� Secure grip� Excellent dexterity, flexibility and durability� Encapsulated air molecules provide an inherent cushioning effect� Silicone free

� HPT foam coating. Nylon liner.

CAT II

EN388: 2003 EN511: 2006

3232 020


SKY082 SKY083 SKY084 SKY085 120

| DEEP GRIP™ WINTER

� Drilling� Engineering� Heavy Construction� Maintenance� Rigging

� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters� Riggers� Roustabout

Luxury meets high-tech! Oil and impact-resistant glove with incredible warmth and comfort.


MATERIALS

KEY FEATURES � Lined with non-pilling and fast-drying Micro-Sable™� Single-piece 3D (patented design) Thermo Plastic Rubber (TPR) for full back of

hand impact protection� Double Kevlar® thread palm stitching for added durability� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and

heightened gripping power for wet, oily or dry surfaces� Long-cuff design bolsters protection, comfort and ‘tear-away’ ability� Soft and flexible fit

� Thermo Plastic Rubber. Micro-Sable™ liner.

CAT II

EN388: 2003

4342


CSL072 CSL073 CSL073 CSL074 100


20 21

| 541

� Engineering� Fabrication � Instrumentation � Insulation� Machining � Maintenance

� Insulators� Electricians� Process Engineers� Pipe Fitters� Instrument Technicians

Supple and light, the 541 provides a high degree of comfort when performing delicate tasks in greasy handing conditions where the risk of cuts is high.


MATERIALS


� Protects the hand from oils and grease

� Maximum resistance to abrasion and tearing

� Lightweight and breathable liner

� Dark colour extends wearable life

� Polyurethane coating. HPPE liner.

CAT II

EN388: 2003

4342

CUT LEVEL

3

| GP-KV1

� Engineering � Fabrication � Insulation � Machining� Maintenance

� Electricians� Insulators � Pipe Fitters � Process Engineers

A flexible easy-maintenance grip glove enabling safe handling of sharp materials with excellent durability.


MATERIALS


� Liner constructed using Kevlar® fibre

� Rough latex surface provides excellent grip and a tactile feel

� Seamless liner prevents irritation

� Natural latex coating. Aramid liner.

CAT II

EN388: 2003

3444

CUT LEVEL

4

POLYESTER

STAINLESS STEEL

POLYESTER

SCHEMATIC OVERVIEW OF HAGANE COIL

POLYESTER

| S-TEX KV3

� Engineering � Fabrication � Insulation � Machining� Maintenance

� Electricians � Insulators� Pipe Fitters � Process Engineers

A light and flexible latex coated glove featuring a reinforced Kevlar® liner softened with polyester. It far exceeds the maximum level of cut resistance specified by the EN388 standard.


MATERIALS


� Engineered from Showa’s patented Hagane Coil™ fibre

� Optimal protection against cuts with very good durability

� Rough latex surface provides excellent grip and a tactile feel

� Wrist protection

� Natural latex coating, Kevlar®. Stainless steel and polyester liner.

CAT II

EN388: 2003

3544

CUT LEVEL

5


SHO3201 SHO3202 SHO3203 SHO3204 120




SHO3901 SHO3902 SHO3903 SHO3904 120

CUT RESISTANT PROTECTION CUT RESISTANT PROTECTION


22 23

| 380

| BEST 4570

� Construction � Engineering � Instrumentation � Maintenance � Mechanical


� Deck Crew � Engineers � Process Engineers� Pipe Fitters� Mechanical Fitters� Riggers

� Deck Crew � Engineers � Process Engineers� Pipe Fitters� Mechanical Fitters� Riggers

The microporous nitrile foam embossed finish provides a strong grip in wet, dry or oily conditions. Ideal for precision tasks.

Fluorescence enhances visibility in poorly-lit environments. Engineered to deliver a secure grip in the most arduous oily, conditions.

Typical Applications

Typical Applications

Suitable Trades

Suitable Trades

MATERIALS

MATERIALS

KEY FEATURES

KEY FEATURES

� Embossed nitrile surface designed to disperse grease efficiently

� Lightweight nylon liner


� Anatomically engineered

� Increased safety in poor lighting conditions

� Excellent oil absorbency and grip

� Lightweight liner with colour coded elasticated cuffs to indicate different sizes


� Silicone free

� Nitrile foam coating. Nylon liner.

� Nitrile sponge coating. Nylon liner.

CAT II

CAT II

EN388: 2003

EN388: 2003

3121

4131


SHO3851 SHO3852 SHO3853 SHO3854 120


BST4570HV1 BST4570HV2 BST4570HV3 BST4570HV4 72

Thermal version also available - see Page 18

| 377

� Drilling� Engineering � Heavy Construction� Helideck � Maintenance � Rigging

� Crane Operators � Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

Fully coated nitrile with a nitrile sponge palm. Great grip, ideal for wet and oily tasks, including oil submersion.


MATERIALS

KEY FEATURES � Impermeable

� Protects the hand from oils, hydrocarbons, grease and abrasion

� Reinforced knit cuff


� Excellent resistance to abrasion

� Highly flexible coating

� Nitrile foam coating on nitrile. Polyester / nylon knit liner.

CAT II

EN388: 2003

4121



GENERAL HANDLING GENERAL HANDLING

24 25

| OHIO™

� Construction � Engineering � Maintenance � Mechanical

� Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

Durable and flexible PVC sponge touch coating using hydropellent technology provides excellent grip in oily, wet and dry handling conditions whilst maintaining good tactility. Extremely resistant to abrasion.


MATERIALS

KEY FEATURES � Anatomically designed for comfort, dexterity and fit� Lint and silicone free� HPT foam coating containing encapsulated air molecules provides

an inherent cushioning effect� Breathable back of glove to minimise perspiration� Seamless liner prevents irritation� Knitted wrist provides a secure fit


CAT II

EN388: 2003

4131

| IDAHO™

� Construction � Engineering � Maintenance � Mechanical

� Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

Durable and flexible PVC sponge touch finish coating using hydropellent technology covers the palm and extends over the knuckles. Provides excellent grip in oily, wet and dry handling conditions whilst maintaining good tactility. Extremely resistant to abrasion.


MATERIALS

KEY FEATURES � Anatomically designed for comfort, dexterity and fit� Durable and cost effective� Lint and silicone free� ¾ HPT foam coating containing encapsulated air molecules

provides an inherent cushioning effect� Seamless liner prevents irritation� Knitted wrist provides a secure fit


CAT II

EN388: 2003

4131


SKY051 SKY052 SKY053 SKY054 120



GENERAL HANDLING GENERAL HANDLING

| 330

� Construction � Engineering � Maintenance � Rigging � Scaffolding

� Deck Crew � Labourers � Mechanical Engineers � Riggers� Scaffolders

Reinforced grip glove. Double latex coating in the area of the glove subject to most stress; between thumb and index finger.


MATERIALS

KEY FEATURES � Extremely durable

� Rough latex surface provides a tactile feel and excellent grip

� Maximum resistance to tears


� Anatomically engineered

� Natural latex coating. Polyester / cotton liner.

CAT II

EN388: 2003

2142


SHO3301 SHO3302 SHO3303 SHO3304 120

| 317

� Construction � Engineering � Maintenance � Rigging � Scaffolding

� Deck Crew � Labourers� Mechanical Engineers � Pipe Fitters � Riggers � Scaffolders

High visibility grip glove with luminous markings. For manual handling in poorly-lit environments.


MATERIALS

KEY FEATURES � Phosphorescent luminous markings

� Rough latex surface provides a tactile feel and excellent grip


� Protects the hand in damp environments or against aggressive detergents or alcohols


� Natural latex coating. Polyester liner.

CAT II

EN388: 2003

2142


SHO3171 SHO3172 SHO3173 SHO3174 120

26 27

GENERAL HANDLING

| ARIA™


� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout

With class-leading durability, Aria protects for long periods when carrying out a multitude of manual handling tasks.


MATERIALS

KEY FEATURES � Anatomically engineered for a comfortable fit

� Excellent grip in damp, oily and dry handling conditions

� Enhanced lifecycle through increased resistance to abrasion and tearing

� Tested for harmful substances according to Oeko-Tex® Standard 100

� Breathable liner keeps hands cool

� NFT™ Nitrile foam coating. Nylon/spandex liner.

CAT II

EN388: 2003

4141

| NINJA LITE™

� Engineering � Instrumentation � Maintenance � Mechanical

� Engineers � Instrument Technicians � Mechanical Fitters � Process Engineers

Ultra lightweight (18gg) glove providing excellent second skin comfort as well as outstanding flexibility and a tactile touch. Protects the hand from oils, grease and abrasion, with effective grip. Ideal for intricate tasks and for preventing product contamination.


MATERIALS

KEY FEATURES � Lightweight (18 gauge) and close fitting for excellent dexterity � Maximum flexibility and movement for the most intricate of tasks� Breathable back to glove to minimise perspiration� Elasticated wrist provides a secure and comfortable fit� Lint free, reducing the risk of product contamination� Seamless liner prevents irritation

� Polyurethane coating. Nylon/lycra liner.

CAT II

EN388: 2003

4131

LIGHTWEIGHT 18gg LINER


SKY491 SKY492 SKY493 SKY494 120



EN420 StandardThe way the glove fits the user is a crucial factor in the dexterity of the working hand.

Testing Prior to UsingIf the glove is too small, it cuts off the blood circulation and restricts the movement of the hand. On the contrary, loose gloves slip off at the slightest movement and make handling very imprecise.

11109876

XXLXLLMS

To check the sizePlace your right hand on the diagram, the blue line should be between your thumb and index finger.

Glove size further to EN420

Hand (mm) Glove

Palm circumference Length Minimum Length

6 152 160 220

7 178 170 230

8 203 182 240

9 229 192 250

10 254 204 260

11 279 215 270

HAND SIZE CHART

28 29

CE INFORMATIONThe Personal Protective Equipment Directives (89/686/CEE) and (93/68/CEE) have been enacted by the European Community to ensure harmonisation of regulations regarding testing of all PPE sold within the community.

All gloves of intermediate and complex design must now be tested independently to ascertain their performance and ensure their safety. They must, if they meet these standards, carry a CE Mark on the gloves, or on their packaging when this is not practical.

CATEGORISATIONUnder the terms of the above directive, gloves fall into the following three categories:

CAT I - Simple DesignFor minimal risks only. Suitable only for low risk applications where hazards can be identified by the wearer in time to deal with them.

CAT II - Intermediate DesignReversible risks. Products are type examined by an approved body where they examine the manufacturers technical specifications and conduct tests for the relevant standards to ascertain their conformity and/or performance.

CAT III - Complex DesignFor protection against mortal danger or risks of irreversible harm. Products are type examined by an approved body as for category II. In addition, the products and manufacturer are subject to EC quality control according to an approved quality system.

EUROPEAN STANDARDS (ENs)

GENERAL REQUIREMENTS EN420

Defines the general requirements for most types of protective gloves including:• Design and construction• Suitability for purpose• Sizing• Comfort and efficiency• Innocuousness

Ratings

MECHANICAL HAZARDS EN388

a b c d

Resistance to abrasionBlade cut resistanceTear resistancePuncture resistance

0-40-50-40-4

THERMAL (HEAT) HAZARDS EN407

a b c def

Resistance to flamabilityContact heat resistanceConvective heat resistanceRadiant heat resistanceResistance to small molten metal splashResistance to large molten metal splash

0-40-40-40-40-40-4

ANTI-STATIC

New EN1149 standard

No pictogram is to be shown

PassorFail

CHEMICAL AND MICRO-ORGANISMS EN374

EN374-2 Resistance to penetration by micro-organisms.Referred to as acceptable quality level (AQL).

1-3

EN374-3 Resistance to chemical hazards - permeation

1-6

PROTECTION FROM COLD EN511

a. b. c.

Resistance to convective coldResistance to contact coldPermeability of water

0-40-40-1

When scores are given, the higher the score the better the performance. 0 denotes a fail and X denotes no test.

OTHER HAND PROTECTION STANDARDS

FOOD HANDLING

RADIOACTIVE CONTAMINATION

IONISING RADIATION

LOW CHEMICAL RESISTANT

Identification of manufacturer

Size

Glove designation

Approved body number

The CE mark

SKYTECNINJA LITE

9/L

98/0120

CHEMICAL RESISTANCE PERMEATION

In compliance with EN374 Standard, the breakthrough time is given as a permeation index according to the following table:

The breakthrough time (in minutes) of a chemical through the glove is measured in conditions simulating a total immersion of the glove in the chemical at 23˚C. The gloves scoring the highest index have the best resistance to permeation. Index 0 denotes breakthrough time is less than 10 minutes.

Breakthrough timehigher than (in minutes)

10 30 60 120 240 480

Permeation index 1 2 3 4 5 6

A GREATER COMMITMENT TO HEALTH AND SAFETY EN STANDARDS FOR HAND PROTECTION

The Single European Act includes a specific pledge to improve health and safety at work for all European workers.

The commitment to ‘level up’ to the best practice currently employed within the Union has been enshrined in a legally binding Framework Directive (89/391/EEC), which not only lays down broad guidelines for health and safety but also places upon the employer an absolute duty “to ensure the safety and health of employees in their workplace”. This directive is amplified by five daughter directives, of which one directly governs the use of protective gloves.

The Use of Personal Protective Equipment Directive 89/656/EEC Four articles of the Directive merit particular attention, as they place substantial responsibilities on employers:

ARTICLE 3 states that before selecting any PPE, a basic assessment must be made to identify and evaluate the risk. Where possible, the risk must be reduced or eliminated by a modification of workplace practice. This option is always to be preferred to the use of PPE.

Under ARTICLE 4, the employer must inform his workers of the risks in the workplace, supply appropriate and correctly fitting PPE which complies with EU standards, and give adequate instruction in its use. He should further ensure that the PPE is used only for the purpose intended by the manufacturer, and in accordance with the manufacturer’s instructions.

ARTICLE 5 requires the employer to:1. Audit workplace hazards and assess the level of risk to employees.2. Define the properties necessary in the gloves to protect the employees.3. Ensure that all gloves used in the workplace conform to the PPE Directive and relevant EN standards.4. Compare the merits of the various types of protection available.5. Keep full records of assessments and reasons for selecting a particular type of glove. If the risk should alter in any way, for instance by the introduction of a new chemical or industrial process, the assessment must be repeated.

Finally, ARTICLE 6 requires Member States to introduce written rules for workplace situations in which the use of PPE shall be considered compulsory. Naturally, employers will have to be aware of and comply with these rules.

To comply with the new regulations, you must select gloves which not only adhere to the above Directive and relevant safety standards, but also are demonstrably of good quality and fittest for the intended task.

COMPLYING WITH THE PPE DIRECTIVE: 89/686/EECThe Directive specifies two classes of glove meeting two levels of risk: ‘Minimal’ and ‘mortal’ or ‘irreversible’ risk. A risk which falls between these two levels may be described as ‘intermediate’. To comply with the 89/656/EEC Directive, you must establish the level of risk and select gloves of the appropriate class.

A system of marking has been developed to help you in that selection.

Gloves of simple design - for minimal risk onlyFor gloves of simple design offering protection from low level risks, e.g. janitorial gloves, manufacturers are permitted to test and certify gloves themselves.

Gloves of this category are CE-marked as follows:

Gloves of intermediate design - for intermediate riskGloves designed to protect against intermediate risk, e.g. generalhandling gloves requiring good cut, puncture and abrasion performance, must be subjected to independent testing and certification by a Notified Body. Only these approved Bodies may issue a CE mark, without which the gloves may not be sold. Each Notified Body has its own identification number. The name and address of the Notified Body that certifies the product has to appear on the instructions for use that will accompany the gloves.

Gloves of intermediate design are CE-marked as follows:

Gloves of complex design - for irreversible or mortal riskGloves designed to protect against the highest levels of risk e.g.chemicals, must also be tested and certified by a Notified Body. In addition, the quality assurance system used by the manufacturer to guarantee homogeneity of production must be independently checked. The Body carrying out this evaluation will be identified by a number which must appear alongside the CE mark (in this case, 0120).

Gloves of complex design are CE-marked as follows:

Please note that the original PPE Directive 89/686/EEC has beenamended by both the 93/95/EEC Directive and the CE MarkingDirectives 93/68/EEC and 95/58 EEC.

RAISING STANDARDS IN EUROPEThe primary aim of the Personal Protective Equipment Directive is to improve safety at work. This is achieved by establishing standards for manufacture and use that will apply throughout the Union; and this is the remit of the Committee for European Normalisation (CEN). The committee is made up of representatives of the national standards organisations in each of the Member States plus EFTA, along with major European PPE manufacturers.

If you would like any further clarification of these Directives, or further information on testing and certification procedures, please contact our Technical Service.

0120

DIRECTIVES

30 31

SCOPEThis standard defines the general requirements for glove designand construction, innocuousness, comfort, efficiency, marking and information applicable to all protective gloves. This standard can also apply to arm guards. The key points are given below. Some gloves designed for very specialist applications, such as electrician’s or surgical gloves are governed by other stringent job-specific standards (Details are available on request).

DEFINITIONA glove is an item of personal protective equipment which protects the hand or any part of the hand from hazards. It may also cover part of the forearm and arm. A performance level is a number (between 0 and 4) which shows how a glove has performed in a specific test, and by which the results of that testing may be graded. Level 0 indicates that the glove is either untested or falls below the minimum performance level. A performance level X means that the testing method is not suitable for the glove sample. Higher numbers indicate higher levels of performance.

GLOVE CONSTRUCTION AND DESIGN• Gloves have to offer the greatest degree of protection in the foreseeable conditions of end use.• When seams are included, the strength of these seams should not reduce the overall performance of the glove.

INNOCUOUSNESS• The gloves themselves shouldn’t cause any harm to the user• PH of the glove should be between 3.5 and 9.5• Chromium (VI) content should be below detection (<10 ppm)• Natural rubber gloves shall be tested on extractable proteins as per EN 455-3.

CLEANING INSTRUCTIONS• If care instructions are provided, the levels of performance should not be reduced after the maximum recommended number of cleaning cycles.

ELECTROSTATIC PROPERTIES• Anti-static gloves that are designed to reduce the risk of electrostatic discharges shall be tested as per EN 1149• Obtained test values are to be reported on the Instructions for Use• An electrostatic pictogram shall NOT be used

SIZING (SEE TABLE BELOW)• Gloves that are below the minimum length are to be called ‘Fit for Special Purpose’.

STANDARD EN 420: 2003GENERAL REQUIREMENTS FOR PROTECTIVE GLOVES

DEXTERITY• If required, performance to be graded as per table at the foot of the page.

WATER VAPOUR TRANSMISSION AND ABSORPTION• If required, gloves shall allow water vapour transmission (5mg cm2.h)• If gloves exclude water vapour transmission, it should be at least 8mg/cm2 for 8 hours.

MARKING & INFORMATION:Marking of the glove• Each glove should be marked with: - Name of manufacturer - Glove and size designation - CE mark - Appropriate pictograms accompanied by the relevant performance levels and the reference of the EN standard.

• The marking should be legible throughout the life of the glove. Where marking of the glove is not possible in view of the characteristics of the glove, it should be mentioned on the first packaging enclosure.

Marking of the packaging immediately containing the gloves• Name and address of the manufacturer or representative• Glove and size designation• CE mark• Usage info - Simple design: “for minimal risks only” - Intermediate design or complex design: relevant pictograms - When protection is limited to part of the hand, this shall be mentioned (e.g. “Palm Protection style only”)• Reference to where information can be obtained

Instructions for Use (To be supplied when the glove is placed on the market)• Name and address of the manufacturer or representative• Glove designation• Size range available• CE mark• Care and storage instruction• Instructions and limitations of use• A list of substances used in the glove which are known to cause allergies• A list of all substances in the glove shall be made available upon request• Name and address of Notified Body that certified the product

SIZING OF GLOVESGlove size Fits hand size Hand circumference/length (mm) Minimum length of the glove (mm)

6 6 152/160 2207 7 178/171 2308 8 203/182 2409 9 229/192 250

10 10 254/204 26011 11 279/215 270

Performance level Smallest diameter of pin that can be picked up with gloved hand 3 times/30 seconds (mm)1 11.02 9.53 8.04 6.55 5.0

EN420

SCOPEThis standard applies to gloves to protect from Ionising Radiation andRadioactive Contamination.

DEFINITION AND REQUIREMENTSThe nature of protection is shown by a pictogram relating to the specific protective qualities.• To protect from radioactive contamination, the glove has to be liquidproof and needs to pass the penetration test defined in EN 374.

STANDARD EN 421: 1994GLOVES GIVING PROTECTION FROM RADIOACTIVE CONTAMINATION AND IONISING RADIATION

• For gloves used in containment enclosures, the glove shall offer high resistance to permeability of water vapour.• To protect from ionising radiation, the glove has to contain a certain amount of lead, quoted as “lead equivalence”. This Lead Equivalence must be marked on each glove.• Materials exposed to ionising radiation may be modelled by their behaviour to ozone cracking. This test is optional and can be used as an aid to selecting gloves which require resistance to ionising radiation.

SCOPEThis standard applies to all kinds of protective gloves in respectof physical and mechanical aggressions caused by abrasion, blade cut, puncture and tearing.

DEFINITION AND REQUIREMENTSProtection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

STANDARD EN 388: 2003GLOVES GIVING PROTECTION FROM MECHANICAL RISKS

The ‘Mechanical Risks’ pictogram is accompanied by a 4-digit code:

a. Resistance to abrasion Based on the number of cycles required to abrade through the sample given.

b. Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed.

c. Tear resistance Based on the amount of force required to tear the sample.

d. Puncture resistance Based on the amount of force required to pierce the sample with a standard sized point.

In all cases, (0) indicates the lowest level of performance, as follows:

a b c d

EN388 TEST PERFORMANCE LEVEL RATING:0 1 2 3 4 5

a. Abrasion resistance (cycles) < 100 100 500 2000 8000

b. Blade cut resistance (factor) < 1.2 1.2 2.5 5.0 10.0 20.0

c. Tear resistance (newton) < 10 10 25 50 75

d. Puncture resistance (newton) < 20 20 60 100 150

These performance levels must be prominently displayed alongside the pictogram on the packaging which immediately contains the gloves.

EN388 / EN421

32 33

SCOPEThis standard applies to any gloves to protect the hands againstconvective and contact cold down to -50oC.

DEFINITION AND REQUIREMENTSProtection against cold is expressed by a pictogram followed by a series of 3 performance levels, relating to specific protective qualities. The ‘cold hazard’ pictogram is accompanied by a 3-digit number:a. Resistance to convective cold (performance level 0 - 4)

b. Resistance to contact cold (performance level 0 - 4)

c. Permeability by water (0 or 1)

STANDARD EN 511: 1994GLOVES GIVING PROTECTION FROM COLD

All gloves must achieve at least EN388 performance level 1 for abrasion and tear.

• Convective cold resistance: based on the thermal insulation properties of the glove which are obtained by measuring the transfer of cold via convection.

• Contact cold resistance: based on the thermal resistance of the glove material when exposed to contact with a cold object.

• Water impermeability: 0 = water penetration after 30 minutes of exposure 1 = no water penetration.

A B C

SCOPEThis standard specifies thermal performance for protective gloves against heat and/or fire.

DEFINITION AND REQUIREMENTSThe nature and degree of protection is shown by a pictogram followed by a series of six performance levels, relating to specific protective qualities. Gloves must also achieve at least Performance level 1 for abrasion and tear.

The ‘heat and flame’ pictogram is accompanied by a 6-digit number:

a. Resistance to flammability (performance level 0-4) Based on the length of time the material continues to burn and glow after the source of ignition is removed. The seams of the glove shall not come apart after an ignition time of 15 seconds.

b. Contact heat resistance (performance level 0-4) Based on the temperature range (100-500oC) at which the user will feel no pain for at least 15 seconds. If an EN level 3 or higher is obtained, the product shall record at least EN level 3 in the flammability test. Otherwise, the maximum contact heat level shall be reported as level 2.

STANDARD EN 407: 2004GLOVES GIVING PROTECTION FROM THERMAL HAZARDS

c. Convective heat resistance (performance level 0-4) Based on the length of time the glove is able to delay the transfer of heat from a flame. A performance level shall only be mentioned if a performance level of 3 or 4 is obtained in the flammability test.

d. Radiant heat resistance (performance level 0-4) Based on the length of time the glove is able to delay the transfer of heat when exposed to a radiant heat source. A performance level shall only be mentioned if a performance level 3 or 4 is obtained in the flammability test.

e. Resistance to small splashes of molten metal (performance level 0-4) The number of molten metal drops required to heat the glove sample to a given level. A performance level shall only be mentioned if a performance level 3 or 4 is obtained in the flammability test.

f. Resistance to large splashes of molten metal (performance level 0-4) The weight of molten metal required to cause smoothing or pinholing across a simulated skin placed directly behind the glove sample. The test is failed if metal droplets remain stuck to the glove material or if the specimen ignites.

a b c d e f

EN407 / EN511

SCOPEThis standard specifies the capability of gloves to protect the useragainst chemicals and/or micro-organisms.

DEFINITIONS:PenetrationThe movement of a chemical and/or micro-organism through porous materials, seam, pinholes or other imperfections in a protective glove material at a non-molecular level.

PermeationThe rubber and plastic films in gloves do not always act as

The ‘Chemical resistant’ glove pictogram must be accompanied by a 3-digit code. This code refers to 3 chemicals (from a list of 12 standard defined chemicals) for which a breakthrough time of at least 30 minutes has been obtained.

The ‘Low Chemical resistant’ or ‘Waterproof’ glove pictogram is to be used for those gloves that do not achieve a breakthrough time of at least 30 minutes against at least three chemicals from the defined list, but which comply with the Penetration test.

The ‘Micro-organism’ pictogram is to be used when the glove conforms to at least a performance level 2 for the Penetration test.

Warning: The chemical data information does not necessarily reflect the actual duration in the workplace.

Permeation: Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6):

STANDARD EN 374: 2003GLOVES GIVING PROTECTION FROM CHEMICALS AND MICRO-ORGANISMS

barriers to liquids. Sometimes they can act as sponges, soaking up the liquids and holding them against the skin. It is therefore necessary to measure breakthrough times, or the time taken for the hazardous liquid to come in contact with the skin.

REQUIREMENTS• The minimum liquid proof section of the glove shall be at least equal to the minimum length of the glove specified in EN 420.• Penetration: A glove shall not leak when tested to an air and/o water leak test, and shall be tested and inspected in compliance with the Acceptable Quality Level.

AQL: Performance level Acceptable quality level unit Inspection levels

Level 3 < 0.65 G1

Level 2 < 1.5 G1

Level 1 < 4.0 S4

Code Chemical CAS Number Class

A Methanol 67-56-1 Primary alcohol

B Acetone 67-64-1 Ketone

C Acetonitrile 75-05-8 Nitrile compound

D Dichloromethane 75-09-2 Chlorinated paraffin

E Carbone disulphide 75-15-0 Sulphur containing Organic compound

F Toluene 108-88-3 Aromatic hydrocarbon

G Diethylamine 109-89-7 Amine

H Tetrahydrofurane 109-99-9 Heterocyclic and Ether compound

I Ethyl acetate 141-78-6 Ether

J N-Heptane 142-85-5 Saturated Hydrocarbon

K Sodium hydroxide 40% 1310-73-2 Inorganic base

L Sulphuric acid 96% 7664-93-9 Inorganic mineral acid

Measured breakthrough time Protection Index Measured breakthrough time Protection Index

> 10 minutes Class 1 > 120 minutes Class 4



A B C

EN374

3534 35

© 2014 Globus (Shetland) Ltd | GLOBUS-BROCH-OIL_GAS-1114

UK AND IRELANDwww.globus.co.ukE: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746Globus (Shetland) Ltd 14 Central Park Trafford Park Manchester M17 1NY UNITED KINGDOM

MIDDLE EAST AND AFRICAwww.globusgroup.com/gccE: [email protected]: +971 4 882 9962F: +971 4 882 9963Globus EMEA FZE Jafza View 19 Floor 9 Office 0904 Jebel Ali DubaiUNITED ARAB EMIRATES

reducing - globus · bespoke and innovative solutions to the most complex hand safety ... product...

Documents