reduced pressure backflow prevention unit ev1:08-11 ... · reduced pressure backflow prevention...
TRANSCRIPT
REDUCED PRESSURE BACKFLOW
PREVENTION UNIT
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTE: 1. ON UNITS 3" AND LARGER, ALL COPPER AND BRASS PIPE FITTINGS SHALL BE FLANGED ON UNITS 3" AND LARGER, ALL COPPER AND BRASS PIPE FITTINGS SHALL BE FLANGED DUCTILE IRON 2. WRAP ALL BURIED COPPER AND BRASS PIPE AND FITTINGS WITH 1" MIN. ANTI-CORROSION WRAP ALL BURIED COPPER AND BRASS PIPE AND FITTINGS WITH 1" MIN. ANTI-CORROSION TAPE TO A HEIGHT OF 6" ABOVE CONCRETE 3. OBTAIN REQUIRED CERTIFICATIONS PER AGENCY REQUIREMENTSOBTAIN REQUIRED CERTIFICATIONS PER AGENCY REQUIREMENTS
AutoCAD SHX Text
9
AutoCAD SHX Text
1
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
11
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
10
AutoCAD SHX Text
8
AutoCAD SHX Text
NTS
AutoCAD SHX Text
3
AutoCAD SHX Text
3
AutoCAD SHX Text
RP BFPU
AutoCAD SHX Text
6
AutoCAD SHX Text
1. REDUCED PRESSURE BACKFLOW PREVENTION UNIT REDUCED PRESSURE BACKFLOW PREVENTION UNIT 2. BRONZE SHUT-OFF VALVE BRONZE SHUT-OFF VALVE 3. BRASS NIPPLE BRASS NIPPLE 4. BRONZE UNION BRONZE UNION 5. BRONZE WYE STRAINER W/40 MESH SCREEN BRONZE WYE STRAINER W/40 MESH SCREEN 6. COPPER PIPE (TYPE K HARD) COPPER PIPE (TYPE K HARD) EXTEND 12" BELOW CONCRETE PAD AND WRAP WITH 1" ANTI-CORROSION TAPE 7. PVC SLEEVES PVC SLEEVES 8. BRASS OR COPPER 90 DEGREE ELBOW BRASS OR COPPER 90 DEGREE ELBOW 9. CONC. METER BOX, INSTALLED BY THE CONC. METER BOX, INSTALLED BY THE CITY OF PHOENIX 10. SCH. 80 PVC TOE NIPPLE SCH. 80 PVC TOE NIPPLE 11. CUBIC FOOT (MIN) CONC. 12 CUBIC FOOT (MIN) CONC. THRUST BLOCK 12. PVC SCH 80 COUPLING PVC SCH 80 COUPLING 13. PVC MAINLINE PIPE (SEE IRRIGATION SCHEDULE)PVC MAINLINE PIPE (SEE IRRIGATION SCHEDULE)
AutoCAD SHX Text
2
BACKFLOW SECURITY ENCLOSURE
EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
1. AFTER ALL WELDING, ENTIRE UNIT SHALL BE PROCESSED WITH IRON PHOSPHATE PRE-TREATMENT. AFTER ALL WELDING, ENTIRE UNIT SHALL BE PROCESSED WITH IRON PHOSPHATE PRE-TREATMENT. 2. ELECTROSTATIC APPLICATION OF POWDERCOAT SHALL BE FUSION BONDED - PRS-B-4004-C (BEIGE) OR COLOR ELECTROSTATIC APPLICATION OF POWDERCOAT SHALL BE FUSION BONDED - PRS-B-4004-C (BEIGE) OR COLOR SELECTION TO BE APPROVED BY OWNER 3. ALL BOLTS FOR HINGES & HASPS SHALL BE ZINC PLATED & TAMPER PROOF ALL BOLTS FOR HINGES & HASPS SHALL BE ZINC PLATED & TAMPER PROOF 4. ALL WELDED AREAS SHALL BE A MINIMUM OF 1/4" WIDTH BEAD EVERY 4" ALL WELDED AREAS SHALL BE A MINIMUM OF 1/4" WIDTH BEAD EVERY 4" 5. GS = POWDERCOATED STEEL GUARD SHACKGS = POWDERCOATED STEEL GUARD SHACK
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
GS-1 EACH END GS-2 EACH END GS-3 ONE END ONLY, OPP. HINGED END GS-3.5 SAME AS GS-2H GS-4 SAME AS GS-2H
AutoCAD SHX Text
WIDTH
AutoCAD SHX Text
HEIGHT
AutoCAD SHX Text
LENGTH
AutoCAD SHX Text
GS-4 - 4"
AutoCAD SHX Text
GS-3 - 4"
AutoCAD SHX Text
GS-2 - 16"
AutoCAD SHX Text
GS-1 - 12"
AutoCAD SHX Text
GS- 1-2-3 6"
AutoCAD SHX Text
GS-4 9"
AutoCAD SHX Text
6" CENTERLINE RADIUS
AutoCAD SHX Text
1/2" NO. 13 FLATTENED DIAMOND PATTERN STEEL MESH
AutoCAD SHX Text
DRILL 2 HOLES AS NOTED
AutoCAD SHX Text
WELD 4" STL HINGES (2) ON GS-3 & GS-4
AutoCAD SHX Text
DRILL 2 - 5/16" HOLES EACH SIDE. BRACKETS CAN BE LOCATED ON SIDES OR ENDS AND SECURED WITH TAMPER PROOF BOLTS
AutoCAD SHX Text
WELD MESH TO PIPE. ANGLE IRON AND STEEL STRAP
AutoCAD SHX Text
1-1/4" STD. WT. A-53 E.W. BLK. STL. PIPE
AutoCAD SHX Text
GUARDLOCK COVER
AutoCAD SHX Text
COVER FOR LOCKING MECHANISM
AutoCAD SHX Text
1. 3/8"-16-2 1/2" FORGED 3/8"-16-2 1/2" FORGED EYEBOLT (QTY 2) 2. 3/8"-16 HEX NUT 3/8"-16 HEX NUT (QTY 4) 3. 3/8" X 1/2" FENDER 3/8" X 1/2" FENDER WASHER (QTY 2) 4. PADLOCK BY OWNERPADLOCK BY OWNER
AutoCAD SHX Text
KEY NOTES:
AutoCAD SHX Text
3
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
4
BALL VALVE
BRONZE, 2-PIECE BALL PORT
NTS
B
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTES: 1. COMPACT SOIL AROUND VALVE BOX TO SAME DENSITY AS UNDISTURBED COMPACT SOIL AROUND VALVE BOX TO SAME DENSITY AS UNDISTURBED ADJACENT SOIL. 2. VALVE BOX SHALL BE SET LEVEL AND PARALLEL TO GRADE.VALVE BOX SHALL BE SET LEVEL AND PARALLEL TO GRADE.
AutoCAD SHX Text
12" X 17 LOCKING VALVE BOX AND COVER W/EXTENSION AS NEEDED FOR DEPTH
AutoCAD SHX Text
BRONZE BALL VALVE
AutoCAD SHX Text
SET TOP OF BOX 1" ABOVE FINISH GRADE
AutoCAD SHX Text
2" DG LAYER
AutoCAD SHX Text
MAIN SUPPLY LINE
AutoCAD SHX Text
SCH 80 PVC COUPLING
AutoCAD SHX Text
SCH 80 PVC NIPPLE
AutoCAD SHX Text
BRICK SUPPORT (1 OF 4 REQ'D)
AutoCAD SHX Text
1-1/2" TURF
BUBBLER IN SLEEVE
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NOTES: 1. FURNISH NOMINAL FITTING SIZES IDENTICAL TO NOMINAL INLET FURNISH NOMINAL FITTING SIZES IDENTICAL TO NOMINAL INLET DIAMETER OF BUBBLER. 2. INSTALL TWO BUBBLERS PER TREE ON OPPOSITE SIDES OF THE INSTALL TWO BUBBLERS PER TREE ON OPPOSITE SIDES OF THE ROOT BALL WHERE INDICATED.
AutoCAD SHX Text
POLY 90 DEGREE ELL
AutoCAD SHX Text
PVC SCH 80 TEE OR ELL
AutoCAD SHX Text
4" PVC PERFORATED 12" LONG DRAINPIPE WITH PVC CAP
AutoCAD SHX Text
FINISH GRADE. TOP OF 2" DG
AutoCAD SHX Text
PRESSURE COMPENSATING BUBBLER
AutoCAD SHX Text
12" PVC SCH 80 NIPPLE (LENGTH 18")
AutoCAD SHX Text
.5 CUBIC FT OF WASHED PEA GRAVEL
AutoCAD SHX Text
PVC SCH 80 NIPPLE (LENGTH AS REQUIRED)
AutoCAD SHX Text
PVC LATERAL PIPE
AutoCAD SHX Text
PVC SCH 80 NIPPLE (LENGTH AS REQUIRED)
BUBBLER
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
NOTES: 1. FURNISH NOMINAL FITTING SIZES TO CORRELATE WITH INLET DIAMETER OF BUBBLER. FURNISH NOMINAL FITTING SIZES TO CORRELATE WITH INLET DIAMETER OF BUBBLER. 2. INSTALL TWO BUBBLERS PER TREE ON OPPOSITE SIDES OF THE ROOT BALL. INSTALL TWO BUBBLERS PER TREE ON OPPOSITE SIDES OF THE ROOT BALL. 3. INSTALL ONE BUBBLER PER SHRUB OR AS NOTED.INSTALL ONE BUBBLER PER SHRUB OR AS NOTED.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
SWING JOINT W/TWO CONNECTORS
AutoCAD SHX Text
PVC SCH 80 TEE OR ELL
AutoCAD SHX Text
TOP OF BUBBLER 1" ABOVE FINISH GRADE PLACED 2" FROM OUTSIDE EDGE OF ROOTBALL
AutoCAD SHX Text
PRESSURE COMPENSATING BUBBLER
AutoCAD SHX Text
12" PVC SCH 80 NIPPLE (LENGTH MIN. 12")
AutoCAD SHX Text
PVC LATERAL PIPE (SCH 40 PVC SOLVENT WELD-INSTALLED 12-14" 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH PARALLEL PIPES SHOULD HAVE MIN. 2" HORIZONTAL SPREAD)
AutoCAD SHX Text
PVC SCH 80 NIPPLE (LENGTH AS REQUIRED)
EMITTER-MULTI OUTLET IN BOX
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
1. 10" ROUND BOX 10" ROUND BOX 2. MULTI OUTLET EMITTER WITH 6 PORTS OPEN MULTI OUTLET EMITTER WITH 6 PORTS OPEN 3. " THREAD SCH 40 MALE ADAPTER 12" THREAD SCH 40 MALE ADAPTER 4. " SCH 80 FLEX HOSE 12" SCH 80 FLEX HOSE 5. " PVC SCH 80 90-DEGREE ELL 12" PVC SCH 80 90-DEGREE ELL 6. " PVC CL 315 PIPE 12" MIN 12" PVC CL 315 PIPE 12" MIN 7. " PVC SCH 80 FITTING 12" PVC SCH 80 FITTING 8. LATERAL IRRIGATION LINE LATERAL IRRIGATION LINE 9. 3" MIN DEPTH OF WASHED PEA GRAVEL 3" MIN DEPTH OF WASHED PEA GRAVEL 10. FILTER FABRIC FILTER FABRIC 11. BRICK SUPPORTS FOR BOX (2)BRICK SUPPORTS FOR BOX (2)
AutoCAD SHX Text
TREE TRUNK
AutoCAD SHX Text
TUBE PLACEMENT
AutoCAD SHX Text
NOTES: 1. MULTI-OUTLET EMITTER ONE PER TREE (OR AS SHOWN ON DRAWINGS). USE GLUE SPECIFIC FOR MULTI-OUTLET EMITTER ONE PER TREE (OR AS SHOWN ON DRAWINGS). USE GLUE SPECIFIC FOR CONNECTIONS. 2. MAINTAIN MINIMUM 3' DISTANCE FROM TREE TRUNK TO EMITTER BOX. MAINTAIN MINIMUM 3' DISTANCE FROM TREE TRUNK TO EMITTER BOX. 3. PLACE ENDS OF SPAGHETTI TUBING NO CLOSER THAN 2' TO TRUNK AND PLACE ENDS OF SPAGHETTI TUBING NO CLOSER THAN 2' TO TRUNK AND AT EDGE OF ROOTBALL. 4. SPAGHETTI TUBING LENGTH SHALL NOT EXCEED 5'.SPAGHETTI TUBING LENGTH SHALL NOT EXCEED 5'.
AutoCAD SHX Text
9
AutoCAD SHX Text
NTS
AutoCAD SHX Text
SET TOP OF BOX 1" ABOVE FINISH GRADE
AutoCAD SHX Text
ROOT BALL
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
EMITTER
EMITTER PLACEMENT
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
TREE
AutoCAD SHX Text
SHRUB
AutoCAD SHX Text
AGAVE
AutoCAD SHX Text
NTS
AutoCAD SHX Text
EDGE OF ROOTBALL
AutoCAD SHX Text
TREE TRUNK
AutoCAD SHX Text
TUBING PLACEMENT - PLACE BELOW GRADE AND AROUND ENTIRE CIRCUMFERENCE OF ROOTBALL
AutoCAD SHX Text
TUBING PLACEMENT
AutoCAD SHX Text
MULTI-PORT EMITTER 1 PER TREE WITH 6 OUTLETS
AutoCAD SHX Text
MULTI-PORT EMITTER 1 PER 6 SHRUBS OR AS SPECIFIED
AutoCAD SHX Text
MULTI-PORT EMITTER 1 PER 5 AGAVE (5 OPEN)
AutoCAD SHX Text
SHRUB
AutoCAD SHX Text
AGAVE
AutoCAD SHX Text
TUBING PLACEMENT - PLACE UPHILL AND 2" AWAY FROM ROOTBALL
AutoCAD SHX Text
NOTES: 1. PLACE EMITTERS AT EDGE OF ROOTBALL PLACE EMITTERS AT EDGE OF ROOTBALL 2. PLACE EMITTER OUTLET AT UPHILL SIDE OF PLANT PLACE EMITTER OUTLET AT UPHILL SIDE OF PLANT IF ON A SLOPE 3. SPAGHETTI TUBING NO LONGER THAN 5'SPAGHETTI TUBING NO LONGER THAN 5'
EMITTER-SINGLE OUTLET
EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
SINGLE OUTLET EMITTER
AutoCAD SHX Text
1/2" THREAD SCH 40 MALE ADAPTER
AutoCAD SHX Text
1/2" SCH 80 PVC 18" MIN LENGTH
AutoCAD SHX Text
1/2" PVC SCH 80 FITTING
AutoCAD SHX Text
LATERAL IRRIGATION LINE
AutoCAD SHX Text
12" MIN VARIES
AutoCAD SHX Text
NOTES: 1. SCH 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH PARALLEL PIPES SHOULD SCH 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH PARALLEL PIPES SHOULD HAVE MIN. 2" HORIZONTAL SPREAD 2. PLACE EMITTER AT UPHILL SIDE OF PLANT OUTSIDE ROOTBALL BY 2"PLACE EMITTER AT UPHILL SIDE OF PLANT OUTSIDE ROOTBALL BY 2"
AutoCAD SHX Text
1/2" PVC SCH 80 - 45 DEGREE ELL
AutoCAD SHX Text
1/2" PVC SCH CL315 PIPE
AutoCAD SHX Text
ADJACENT WALK OR PAVEMENT
AutoCAD SHX Text
ROOT BALL
MASTER VALVE AND FLOW SENSOR
FS
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTES: 1. INLET PIPE LENGTH TO FLOW SENSOR MUST BE MIN. 10X PIPE DIA. IN STRAIGHT, INLET PIPE LENGTH TO FLOW SENSOR MUST BE MIN. 10X PIPE DIA. IN STRAIGHT, UNOBSTRUCTED PIPE, NO FITTINGS OR TURNS. 2. OUTLET PIPE LENGTH FROM SENSOR MUST BE MIN. 5X PIPE DIA. IN STRAIGHT, OUTLET PIPE LENGTH FROM SENSOR MUST BE MIN. 5X PIPE DIA. IN STRAIGHT, UNOBSTRUCTED RUN OF PIPE, NO FITTINGS OR TURNS. 3. VERIFY MANUFACTURER SPECIFICATIONS ON DISTANCE REQUIRED BETWEEN MASTER VERIFY MANUFACTURER SPECIFICATIONS ON DISTANCE REQUIRED BETWEEN MASTER VALVE AND FLOW SENSOR.
AutoCAD SHX Text
TO VALVES
AutoCAD SHX Text
NTS
AutoCAD SHX Text
12" X 17" VALVE BOX
AutoCAD SHX Text
FLOW SENSOR
AutoCAD SHX Text
BRASS MASTER VALVE
AutoCAD SHX Text
SCH 40 MAINLINE PIPE
AutoCAD SHX Text
SCH 80 FITTING
AutoCAD SHX Text
WATER PROOF WIRE CONNECTORS
AutoCAD SHX Text
MIN. 18/2 WIRE TO INTERFACE PANEL MIN. MAX. WIRE RUN LENGTH OF 1,000'
AutoCAD SHX Text
MV
AutoCAD SHX Text
SET BOX 1"ABOVE DG 1-1/2" ABOVE TURF
AutoCAD SHX Text
3" MIN DEPTH WASHED PEA GRAVEL
AutoCAD SHX Text
FROM B.F.P.U
AutoCAD SHX Text
SEE NOTE 1
AutoCAD SHX Text
SEE NOTE 1
AutoCAD SHX Text
SEE NOTE 2
LARGE SPRINKLER ROTOR
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
1
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NOTE: SCH. 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH. PARALLEL PIPES SHOULD HAVE MIN. 2" HORIZONTAL SPREAD
AutoCAD SHX Text
FINISH GRADE ROTOR POP-UP SPRINKLER PREFABRICATED DOUBLE SWING JOINT PVC SCH 40 TEE OR ELL LATERAL PIPE
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
LEACH LINE
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
10' LONG 6" DIA. PERFORATED PVC DRAINLINE CAP END PVC SET LEVEL
AutoCAD SHX Text
NO. 4 AGGRGATE BASE COURSE
AutoCAD SHX Text
FILTER FABRIC
AutoCAD SHX Text
SOLVENT WELD 2 " O.D. 12" O.D. DRINKING FTN. DRAINLINE TO 6" PERFORATED DRAINLINE W/ REDUCER FITTING
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NO. 2 PVC WASTELINE
YESNO
SOLAR IRRIGATION CONTROLLER
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
AMBIENT LIGHT POWERED IRRIGATION CONTROLLER
AutoCAD SHX Text
12 OR 14 GAUGE WIRE
AutoCAD SHX Text
35" HIGH X 31 CM WIDE STEEL MOUNTING COLUMN
AutoCAD SHX Text
POURED CONCRETE BASE 1-1/2 CU.FT. INSTALL PER MANUFACTURER'S INSTALLATION GUIDE
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
6-1/2" OF BACKFILL SOIL
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
3
AutoCAD SHX Text
TERMINAL STRIP.
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
9
AutoCAD SHX Text
PROGRAMMING KEY
AutoCAD SHX Text
DIRECT BURIAL CONTROL WIRES TO CONTROL VALVES
AutoCAD SHX Text
NTS
AutoCAD SHX Text
2
AutoCAD SHX Text
9.
AutoCAD SHX Text
8.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
4.
AutoCAD SHX Text
3.
AutoCAD SHX Text
2.
AutoCAD SHX Text
1.
AutoCAD SHX Text
1%
AutoCAD SHX Text
10
AutoCAD SHX Text
SLOPE TOP OF FOOTING AWAY FROM CENTER POST (MIN. 1% = ")12")
AutoCAD SHX Text
10.
MANUAL FLUSH CAP
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
BRASS HOSE CAP
AutoCAD SHX Text
SCH 80 90° PVC ELL
AutoCAD SHX Text
SUPPORT BRICK (1 OF 4 REQD.)
AutoCAD SHX Text
PVC LATERAL
AutoCAD SHX Text
SET TOP OF BOX 1" ABOVE DG OR 1-1/2" ABOVE TURF AFTER COMPACTION
AutoCAD SHX Text
1" - 1-1/2" MAX
AutoCAD SHX Text
12"-14"
AutoCAD SHX Text
1/2" SCH 80 NIPPLE (LENGTH AS REQUIRED)
AutoCAD SHX Text
12" DEPTH PEA GRAVEL
AutoCAD SHX Text
PVC LATERAL
AutoCAD SHX Text
10" ROUND VALVE BOX
AutoCAD SHX Text
NTS
AutoCAD SHX Text
FC
AutoCAD SHX Text
1/2" F.I.P X 3/4" M.H.A (BRASS)
AutoCAD SHX Text
1/2" SCH 80 MALE ADAPTER
IRRIGATION PIPE AND
SLEEVE SCHEDULE
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
1/2"
AutoCAD SHX Text
3/4"
AutoCAD SHX Text
1"
AutoCAD SHX Text
1-1/4"
AutoCAD SHX Text
1-1/2"
AutoCAD SHX Text
1/2" - 3/4"
AutoCAD SHX Text
1" - 2"
AutoCAD SHX Text
3"
AutoCAD SHX Text
4"
AutoCAD SHX Text
NTS
AutoCAD SHX Text
GPM
AutoCAD SHX Text
0-5
AutoCAD SHX Text
6-10
AutoCAD SHX Text
11-15
AutoCAD SHX Text
16-25
AutoCAD SHX Text
26-35
AutoCAD SHX Text
PIPE SIZE
AutoCAD SHX Text
SLEEVE SCHEDULE
AutoCAD SHX Text
PIPE SIZE
AutoCAD SHX Text
MINIMUM SLEEVE SIZE
AutoCAD SHX Text
NOTE: FOR MULTIPLE PIPES IN ONE SLEEVE MINIMUM, 3" OR LARGER SO PIPES MOVE FREELY IN BOTH DIRECTIONS.
BALL VALVE
PLASTIC, 2-PIECE BALL PORT
NTS
P
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTES: 1. COMPACT SOIL AROUND VALVE BOX TO SAME DENSITY AS UNDISTURBED COMPACT SOIL AROUND VALVE BOX TO SAME DENSITY AS UNDISTURBED ADJACENT SOIL. 2. VALVE BOX SHALL BE SET LEVEL AND PARALLEL TO GRADE. VALVE BOX SHALL BE SET LEVEL AND PARALLEL TO GRADE. 3. HARDWARE SHALL BE STAINLESS STEEL BATS WITH STAINLESS STEEL WASHERS.HARDWARE SHALL BE STAINLESS STEEL BATS WITH STAINLESS STEEL WASHERS.
AutoCAD SHX Text
12" X 17 LOCKING VALVE BOX AND COVER W/EXTENSION AS NEEDED FOR DEPTH
AutoCAD SHX Text
PLASTIC BALL VALVE
AutoCAD SHX Text
SET TOP OF BOX 1" ABOVE FINISH GRADE
AutoCAD SHX Text
2" DG LAYER
AutoCAD SHX Text
MAIN SUPPLY LINE
AutoCAD SHX Text
SCH 80 PVC COUPLING
AutoCAD SHX Text
SCH 80 PVC NIPPLE
AutoCAD SHX Text
BRICK SUPPORT (1 OF 4 REQ'D)
AutoCAD SHX Text
1-1/2" TURF
PRESSURE REGULATOR AND WYE STRAINER
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
BRONZE (SIZE AS SPECIFIED IN LEGEND) NTS
AutoCAD SHX Text
4"X 8"BRICK, SET LEVEL AT EACH CORNER FOR SUPPORT
AutoCAD SHX Text
PVC SCH 40 PIPE
AutoCAD SHX Text
EXCAVATE TO ALLOW FOR 6" DEPTH 3/8" PEA GRAVEL
AutoCAD SHX Text
PVC SCH 40 PIPE
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
SCH 80 PVC T.O.E NIPPLE 4" LENGTH
AutoCAD SHX Text
PVC SCH 80 48 ELL(TYP) ° ELL(TYP)
AutoCAD SHX Text
4" MINIMUM CLEARANCE FROM BOTTOM OF VALVE BOX LID TO TOP OF HIGHEST PART
AutoCAD SHX Text
LARGE 12"X17" VALVE BOX WITH T-COVER LID-WITH BOLT DOWN OPTION, INSTALL 1" ABOVE DG AFTER COMPACTION INCL. STAINLESS STEEL HARDWARE.
AutoCAD SHX Text
PVC SCH 80 T.O.E NIPPLE
AutoCAD SHX Text
PVC SCH 80 T.O.E NIPPLE
AutoCAD SHX Text
THREADED BRASS NIPPLE
QUICK COUPLER ASSEMBLY
QC
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTE: 1. "-2.5" PVC SCH. 40 MAINLINE 34"-2.5" PVC SCH. 40 MAINLINE SOLVENT WELD-INSTALLED 18-20" DEEP 2. SET PIPES PARALLEL IN TRENCH WITH 2" SET PIPES PARALLEL IN TRENCH WITH 2" SPACE BETWEEN THEM.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
1. 10" ROUND VALVE BOX W/T-STYLE, 10" ROUND VALVE BOX W/T-STYLE, LOCKING BOLT COVER O.A.E. SET TOP OF VALVE BOX, 1" ABOVE TURF or 1- " 12" ABOVE DG AFTER COMPACTION. 2. BRASS QUICK COUPLER VALVE WITH BRASS QUICK COUPLER VALVE WITH LOCKING RUBBER COVER 3. UNITIZED SWING JOINT W/STABILIZED UNITIZED SWING JOINT W/STABILIZED BRASS NIPPLE 4. PVC SCH 40 SLIP TEE PVC SCH 40 SLIP TEE 5. PVC SCH 40 MAINLINE PIPE PVC SCH 40 MAINLINE PIPE 6. 6" LAYER PEA GRAVEL. (MIN 1 C.F.) 6" LAYER PEA GRAVEL. (MIN 1 C.F.) EXTEND BEYOND BOX EDGES 4"x8" STANDARD BRICK 7. 1/2" WIDE STAINLESS STEEL STRAP (2) 1/2" WIDE STAINLESS STEEL STRAP (2) 8. #4 MIN. REBAR 36" LONG#4 MIN. REBAR 36" LONG
AutoCAD SHX Text
MAINLINES 2 " AND SMALLER12" AND SMALLER
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
9
AutoCAD SHX Text
3
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
1
AutoCAD SHX Text
4
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
PLAN VIEW:
REMOTE CONTROL BRASS VALVE,
PRESSURE REGULATOR AND WYE STRAINER EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
4"X8"BRICK, SET LEVEL AT EACH CORNER FOR SUPPORT
AutoCAD SHX Text
PVC SCH 80 T.O.E NIPPLE (ON MAINLINES 3" AND LARGER USE EXTRUDED TOE NIPPLE)
AutoCAD SHX Text
MAINLINE TEE 2.5" AND SMALLER USE SCH 80 PVC, 3" AND LARGER USE DUCTILE IRON GXGXFIPT TEE
AutoCAD SHX Text
EXCAVATE TO ALLOW FOR 6" DEPTH 3/8" PEA GRAVEL
AutoCAD SHX Text
PVC SCH 40 PIPE
AutoCAD SHX Text
FINISH GRADE.
AutoCAD SHX Text
PVC SCH 40 PIPE
AutoCAD SHX Text
SCH 80 PVC T.O.E NIPPLE 4" LENGTH
AutoCAD SHX Text
PVC SCH 80 48° ELL(TYP)
AutoCAD SHX Text
4" MINIMUM CLEARANCE FROM BOTTOM OF VALVE BOX LID TO TOP OF HIGHEST PART
AutoCAD SHX Text
JUMBO 14X19 VALVE BOX WITH LID-WITH BOLT DOWN OPTION, INSTALL 1" ABOVE FINISH GRADE FOR DG OR 1-1/2" FOR TURF. INCLUDE STAINLESS STEEL HARDWARE.
AutoCAD SHX Text
SCH 80 T.O.E NIPPLE
AutoCAD SHX Text
ELECTRIC BRASS SOLENOID VALVE
AutoCAD SHX Text
BRONZE WYE STRAINER, BRONZE PRESSURE REGULATOR WITH PRESSURE GAUGE AND BRASS 3" NIPPLES
AutoCAD SHX Text
1. SCHEDULE 40 PVC SOLVENT SCHEDULE 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH PARALLEL PIPES SHOULD HAVE A MIN, OF 2" HORIZONTAL SEPARATION 2. VALVE BOX TO INCLUDE VALVE BOX TO INCLUDE STAINLESS STEEL BOLT AND WASHER.
AutoCAD SHX Text
NOTES:
ROOT BARRIER
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
24" MIN.
AutoCAD SHX Text
EMITTER PLACEMENT
AutoCAD SHX Text
ASPHALT DRIVE
AutoCAD SHX Text
CONCRETE CURB
AutoCAD SHX Text
ROOTBALL
AutoCAD SHX Text
24" IRRG & S.D.
AutoCAD SHX Text
ROOT BARRIER
AutoCAD SHX Text
ROOT BARRIER
AutoCAD SHX Text
NOTES: 1. TOP OF ROOT TOP OF ROOT CONTROL BARRIER MUST BE AT GRADE 2. POSITION OF ROOT POSITION OF ROOT CONTROL BARRIER SHALL BE ADJACENT TO CURBS 3. RAISED ROOT DEFLECTORS RAISED ROOT DEFLECTORS MUST BE FACING PLANTED AREA 4. PROVIDE A MINIMUM PROVIDE A MINIMUM LENGTH 12 FEET OF ROOT BARRIER PER TREE. CENTER ON TREE TRUNK. 5. PROVIDE 6 CONTINUOUS PROVIDE 6 CONTINUOUS FEET PER SIDE OF TREE. 6. ROOT BARRIER SHALL BE ROOT BARRIER SHALL BE A MINIMUM OF 24 INCHES BELOW GRADE ON CURBSIDE. 7. LOCATION OF H20 LINE LOCATION OF H20 LINE ON SOUTH SIDE OF ROOT BARRIER BETWEEN ROOTBALL AND WIRE
AutoCAD SHX Text
BACKFILL MIX (SEE SPECIFICATIONS)
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
CONCRETE CURB
AutoCAD SHX Text
ASPHALT DRIVE
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
NTS
REDUCED PRESSURE BACKFLOW
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
ON UNITS 3" AND LARGER, ALL COPPER AND BRASS PIPE FITTINGS SHALL BE FLANGED DUCTILE IRON
AutoCAD SHX Text
WRAP ALL BURIED COPPER AND BRASS PIPE AND FITTINGS WITH PLASTIC SAFETY CLAD TAPE TO A HEIGHT OF 6" ABOVE CONCRETE
AutoCAD SHX Text
1. REDUCED PRESSURE BACKFLOW PREVENTION UNIT REDUCED PRESSURE BACKFLOW PREVENTION UNIT (BRASS) 2. CONC. METER BOX, INSTALLED BY CITY OF PHOENIX CONC. METER BOX, INSTALLED BY CITY OF PHOENIX 3. PROVIDE CMB MODEL 3131 PROVIDE CMB MODEL 3131 BRONZE "Y" STRAINER W/ 40 MESH SCREEN 4. COPPER PIPE (TYPE K HARD) COPPER PIPE (TYPE K HARD) 5. SCH. 80 PVC TOE NIPPLE SCH. 80 PVC TOE NIPPLE 6. CUBIC FOOT (MIN) CONC. THRUST BLOCK 12 CUBIC FOOT (MIN) CONC. THRUST BLOCK 7. BRASS OR COPPER 90 DEGREE ELBOW BRASS OR COPPER 90 DEGREE ELBOW 8. BRONZE UNION BRONZE UNION 9. PVC SCH 80 COUPLING PVC SCH 80 COUPLING 10. PVC MAINLINE PIPE (SEE IRRIGATION SCHEDULE) PVC MAINLINE PIPE (SEE IRRIGATION SCHEDULE) 11. PVC SLEEVESPVC SLEEVES
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
9
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
4
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
5
AutoCAD SHX Text
7
AutoCAD SHX Text
BFPU
IRRIGATION SLEEVE UNDER PAVEMENT
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
PAVING
AutoCAD SHX Text
FINISH GRADE BEYOND CURB ON PAVEMENT EDGE, SET 1-1/2" BELOW TOP OF CURB
AutoCAD SHX Text
SLEEVE PIPE
AutoCAD SHX Text
SEPARATE SLEEVE MUST BE USED FOR WIRING.
AutoCAD SHX Text
EXTEND SLEEVE 12" BEYOND CURB EDGE
AutoCAD SHX Text
MARK SLEEVE LOCATION WITH 6" PULL BOX AND VERTICAL SCH 40 PVC PIPE
AutoCAD SHX Text
NOTE: ALTERNATIVE METHODS FOR MARKING SLEEVE LOCATIONS: 1. STAMP BACK OF CURB WITH AN 'S' FOR NEW CONCRETE STAMP BACK OF CURB WITH AN 'S' FOR NEW CONCRETE 2. RETROFIT WILL REQUIRE 'S' TO BE ETCHED BACK OF CURBRETROFIT WILL REQUIRE 'S' TO BE ETCHED BACK OF CURB
AutoCAD SHX Text
MARKED
SMALL SPRINKLER ROTOR
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
5 LATERAL PIPE LATERAL PIPE
AutoCAD SHX Text
1FINISH GRADEFINISH GRADE
AutoCAD SHX Text
2MODEL ROTOR HEADMODEL ROTOR HEAD
AutoCAD SHX Text
4LATERAL TEE OR ELL LATERAL TEE OR ELL
AutoCAD SHX Text
6RECLAIMED RUBBER COVERRECLAIMED RUBBER COVER
AutoCAD SHX Text
NTS
AutoCAD SHX Text
(TORO S700C, HUNTER IS-20&IS-25 STAINLESS STEEL)
AutoCAD SHX Text
1
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
3 PREFABRICATED DOUBLE SWING JOINT (SCH 40 PVC)
AutoCAD SHX Text
NOTE: SCH 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH. PARALLEL PIPES SHOULD HAVE MIN. 1" HORIZONTAL SPREAD)
SOIL MOISTURE PROBE
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
SOIL MOISTURE RECEIVER RADIO
AutoCAD SHX Text
MOUNT TO GREEN HALF SLOT CHANNEL UNISTRUT 1 5/8" X 1 5/8"
AutoCAD SHX Text
SOIL SLURRY MIX
AutoCAD SHX Text
MAXIMUM 5 PROBES PER RADIO
AutoCAD SHX Text
SOIL MOISTURE RECEIVER RADIO
AutoCAD SHX Text
ELECTRICAL DRY BOX INSTALL FOR WIRE SPLICE, COIL EXCESS WIRE IN BOX
AutoCAD SHX Text
1.25" DIA PROBE
AutoCAD SHX Text
1.27" AUGER HOLE
AutoCAD SHX Text
1" CONDUIT
AutoCAD SHX Text
BELDEN WIRE 19509 B59250
AutoCAD SHX Text
GRADE
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
SOIL MOISTURE RECEIVER RADIO
AutoCAD SHX Text
NTS
AutoCAD SHX Text
IN ENCLOSURE
AutoCAD SHX Text
FLEX CONDUIT
AutoCAD SHX Text
TERMINAL BLOCK
AutoCAD SHX Text
8X6X4 BOX
AutoCAD SHX Text
RADIO
AutoCAD SHX Text
ANTENNA
AutoCAD SHX Text
COVER
AutoCAD SHX Text
OPTIONAL EXTERNAL ANTENNA
AutoCAD SHX Text
MOUNT TO GREEN HALF SLOT CHANNEL UNISTRUT 1 5/8" X 1 5/8"
STAINLESS STEEL CONTROLLER CABINET
FLOW
+ -
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
STRONGBOX STAINLESS STEEL NEMA 3R RAINPROOF ENCLOSURE (UL LISTED).
AutoCAD SHX Text
SATELLITE ASSEMBLY (Optional) ASSEMBLED IN ENCLOSURE
AutoCAD SHX Text
TERMINAL STRIP FOR VALVE WIRES.
AutoCAD SHX Text
POWER SWITCH / GFCI RECEPTACLE.
AutoCAD SHX Text
CONDUIT AND SWEEP ELL FOR 110 VAC POWER LINE.
AutoCAD SHX Text
CONDUIT AND SWEEP ELL WITH FLOW SENSOR CABLE.
AutoCAD SHX Text
ELECTRICAL FLEX CONDUIT FOR POWER.
AutoCAD SHX Text
5/8" X 8' GROUND ROD WITH #6 GROUND WIRE AND CLAMP. LOCATE 8'-12' FROM ENCLOSURE.
AutoCAD SHX Text
10" ROUND VALVE BOX AROUND GROUND ROD. FILL WITH 3/4" CRUSHED ROCK.
AutoCAD SHX Text
CONDUIT AND SWEEP ELL FOR LEAD WIRES.
AutoCAD SHX Text
CONDUIT AND SWEEP ELL FOR MASTER VALVE WIRES.
AutoCAD SHX Text
FLOW SENSOR TERMINAL BOARD.
AutoCAD SHX Text
6" MIN THICK, CONCRETE PAD WITH ANCHOR BOLTS PER MANUFACTURER RECOMMENDATIONS.
AutoCAD SHX Text
FINISHED GRADE.
AutoCAD SHX Text
#6 GROUND WIRE SECURED TO BACKBOARD GROUNDING TERMINAL.
AutoCAD SHX Text
CONDUIT AND SWEEP ELL FOR GROUND WIRE.
AutoCAD SHX Text
FRONT VIEW
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
LID OPEN
AutoCAD SHX Text
9 1/2"
AutoCAD SHX Text
8' TO 12' AWAY
AutoCAD SHX Text
6" MIN.
AutoCAD SHX Text
NOTES: 1. CONTRACTOR TO CONFIRM WIRING CONFIGURATION PER THIS PROJECT AND PROVIDE ADEQUATE CONDUIT FOR CONTRACTOR TO CONFIRM WIRING CONFIGURATION PER THIS PROJECT AND PROVIDE ADEQUATE CONDUIT FOR WIRES TO MOVE FREELY WITHIN CONDUIT FOR COMPLETE AND CLEAN INSTALLATION INTO CABINET. 2. BUNDLE WIRE WITH PLASTIC WIRE TIE TO PROVIDE NEAT AND ORGANIZED INSTALL CABINET DIMENSIONS: 16"W X BUNDLE WIRE WITH PLASTIC WIRE TIE TO PROVIDE NEAT AND ORGANIZED INSTALL CABINET DIMENSIONS: 16"W X 38"H X 15.5"D 3. CONTRACTOR TO COORDINATE AND ASSURE POWER TO CONTROLLER LOCATON AS SHOWN ON DRAWINGS.CONTRACTOR TO COORDINATE AND ASSURE POWER TO CONTROLLER LOCATON AS SHOWN ON DRAWINGS.
AutoCAD SHX Text
ALSO INCLUDE: 1. HAND HELD REMOTES - QTY PER BID - MIN 1 PER SPECIFICATION HAND HELD REMOTES - QTY PER BID - MIN 1 PER SPECIFICATION 2. APPROPRIATE AIR CARD & COMMUNICATIONSAPPROPRIATE AIR CARD & COMMUNICATIONS
AutoCAD SHX Text
FOR RAINMASTER EAGLE PLUS-I TWO-WIRE CONTROLLER: SA6-RM2-TW (RAIN MASTER I-CENTRAL CONTROLLER)
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
3
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
4
AutoCAD SHX Text
4.
AutoCAD SHX Text
5.
AutoCAD SHX Text
5
AutoCAD SHX Text
5
AutoCAD SHX Text
16
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
6.
AutoCAD SHX Text
7.
AutoCAD SHX Text
8.
AutoCAD SHX Text
9
AutoCAD SHX Text
9.
AutoCAD SHX Text
9
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
12
AutoCAD SHX Text
12.
AutoCAD SHX Text
13
AutoCAD SHX Text
13.
AutoCAD SHX Text
14.
AutoCAD SHX Text
14
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
15.
AutoCAD SHX Text
16.
TRENCHING DETAIL
EV 1: 08-11-2018COP St r ee t s Dept .
AutoCAD SHX Text
TUBING OR WIRING
AutoCAD SHX Text
SECTION "A" ALL PIPE INSTALLATION. TRENCH EXCAVATION, BEDDING, BACK FILL AND COMPACTION SHALL CONFORM TO COP SUPPLEMENT SEC. 440
AutoCAD SHX Text
10'
AutoCAD SHX Text
NTS
AutoCAD SHX Text
3"
AutoCAD SHX Text
2"
AutoCAD SHX Text
18-20"
AutoCAD SHX Text
12-14"
AutoCAD SHX Text
NOTES: 1. TOP OF WIRE BUNDLE SHOULD BE 2" BELOW TOP OF PIPE. TOP OF WIRE BUNDLE SHOULD BE 2" BELOW TOP OF PIPE. 2. HORIZONTAL DISTANCE BETWEEN ALL PIPE MIN. 2" HORIZONTAL DISTANCE BETWEEN ALL PIPE MIN. 2" 3. ALL PIPING 3" AND LARGER SHALL HAVE 24"-26" OF COVERALL PIPING 3" AND LARGER SHALL HAVE 24"-26" OF COVER
AutoCAD SHX Text
TAPE AND BUNDLE TUBING OR WIRING AT 10'-0" INTERVALS
AutoCAD SHX Text
LATERAL LINE - SCH. 40 PVC SOLVENT WELD-INSTALLED 12-14" DEPTH. PARALLEL PIPES SHALL HAVE MIN. 2" HORIZONTAL SPREAD
AutoCAD SHX Text
MAINLINE - "-2.5" SCH. 40 PVC 34"-2.5" SCH. 40 PVC SOLVENT WELD 18-20" DEPTH. 3" AND LARGER CLASS 200 "O"-RING PIPE. PARALLEL PIPES SHOULD HAVE A MIN. OF 2" HORIZONTAL SEPARATION
AutoCAD SHX Text
ADD 2" LAYER OF FINELY GRADED NATIVE SOIL OR BEDDING SAND AND BACK FILL
TURF SPRAY
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NOTES: 1. TURF SPRAY TURF SPRAY W/ PRESSURE REGULATION AND CHECK VALVE (ALL NOZZLES SHOULD BE FIXED, USE ADJUSTABLE ONLY WHEN NECESSARY) 2. SCH. 40 PVC SCH. 40 PVC SOLVENT WELD-INSTALLED 12-14"DEPTH.
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
SPRAY HEAD
AutoCAD SHX Text
12" STREET ELLS
AutoCAD SHX Text
12" STREET ELLS
AutoCAD SHX Text
12" SCH 80 NIPPLE
AutoCAD SHX Text
SCH 40 PVC TEE
AutoCAD SHX Text
SWING JOINT
AutoCAD SHX Text
PVC LATERAL LINE
AutoCAD SHX Text
3. PARALLEL PIPES SHOULD HAVE MIN. 2" HORIZONTAL SPREAD
TWO-WIRE STRAIGHT CONFIGURATION
EV 1: 08-11-2018COP St r ee t s Dep t .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
DECODER/ VALVE
AutoCAD SHX Text
DECODER/ VALVE
AutoCAD SHX Text
DECODER/ VALVE
AutoCAD SHX Text
INTERNAL LIGHTING ARRESTOR
AutoCAD SHX Text
CONTROLLER
AutoCAD SHX Text
LIGHTING ARRESTOR
AutoCAD SHX Text
LIGHTING ARRESTOR
AutoCAD SHX Text
GROUND
AutoCAD SHX Text
5/8"x8' COPPER CLAD GROUND ROD
AutoCAD SHX Text
LIGHTING ARRESTOR
AutoCAD SHX Text
GROUND
AutoCAD SHX Text
STRAIGHT LINE CONFIGURATION
AutoCAD SHX Text
5,000'
AutoCAD SHX Text
TW-CAB-14
AutoCAD SHX Text
WIRE GAUGE TOTAL WIRE LENGTH WIRE GAUGE TOTAL WIRE LENGTH
AutoCAD SHX Text
MAX 600' BETWEEN LIGHTING ARRESTORS
AutoCAD SHX Text
NOTES: 1. NO MORE THAN ONE DECODER PER VAVLE. NO MORE THAN ONE DECODER PER VAVLE. 2. EACH DECODER HAS A UNIQUE ADDRESS. EACH DECODER HAS A UNIQUE ADDRESS. 3. DECODERS WILL AUTOMATICALLY SHUT-OFF IF CONNECTION IS DECODERS WILL AUTOMATICALLY SHUT-OFF IF CONNECTION IS LOST WITH THE INTERFACE MODULE. 4. AN OPEN CIRCUIT OR SHORT WILL SHUT OFF THE VALVE. AN OPEN CIRCUIT OR SHORT WILL SHUT OFF THE VALVE. 5. ELECTRICAL CONNECTION REQUIREMENTS: WATER TIGHT ELECTRICAL CONNECTION REQUIREMENTS: WATER TIGHT CONNECTORS.
WALL MOUNT CONTROLLER
EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
WALL
AutoCAD SHX Text
NOTE: ALL WIRING TO BE INSTALLED AS PER LOCAL CODE: SEE MANUAL FOR MOUNTING INSTRUCTIONS
AutoCAD SHX Text
PROVIDE LAMINATED CONTROLLER SCHEDULE INSIDE CONTROLLER CABINET
AutoCAD SHX Text
NTS
AutoCAD SHX Text
CONTROLLER IN WEATHERPROOF LOCKING CABINET. MOUNT SECURELY TO WALL SURFACE WITH APPROPRIATE HARDWARE.
AutoCAD SHX Text
4" MIN.
AutoCAD SHX Text
UF DIRECT BURIAL WIRES (TO REMOTE CONTROL VALVES)
AutoCAD SHX Text
STEEL CONDUIT
AutoCAD SHX Text
120 V POWER AND GROUND SOURCE TO BE PROVIDED BY ELECTRICAL CONTRACTOR.
AutoCAD SHX Text
STEEL CONDUIT 1" MIN.
AutoCAD SHX Text
JUNCTION BOX
AutoCAD SHX Text
CONTROL WIRE
AutoCAD SHX Text
SWEEP ELLS SCH. 40
WATER SYSTEM SCHEMATIC
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
w
AutoCAD SHX Text
w
AutoCAD SHX Text
BFPU
AutoCAD SHX Text
MV
AutoCAD SHX Text
fs
AutoCAD SHX Text
MUNICIPAL OWNED EQUIPMENT
AutoCAD SHX Text
1. WATER SUPPLY LINE WATER SUPPLY LINE 2. WATER TAP WATER TAP 3. WATER MAIN WATER MAIN 4. CURB STOP CURB STOP 5. WATER METER WATER METER 6. CONCRETE WATER METER VAULT PER MAG SPECIFICATIONS TYPE "K" COPPER CONCRETE WATER METER VAULT PER MAG SPECIFICATIONS TYPE "K" COPPER 7. PIPE TO BACKFLOW PREVENTION UNIT (B.F.P.U.) PIPE TO BACKFLOW PREVENTION UNIT (B.F.P.U.) 8. BACKFLOW PREVENTION UNIT BACKFLOW PREVENTION UNIT 9. MASTER VALVE MASTER VALVE 10. FLOW SENSOR FLOW SENSOR 11. PVC MAINLINE PIPE PVC MAINLINE PIPE 12. VALVE BOX PER SPECIFICATIONS VALVE BOX PER SPECIFICATIONS 13. REMOTE CONTROL VALVE REMOTE CONTROL VALVE 14. PRESSURE REGULATOR PRESSURE REGULATOR 15. WYE STRAINER WYE STRAINER 16. PVC LATERAL PVC LATERAL 17. SPRINKLER, BUBBLER OR EMITTER OUTLET PER PLANSPRINKLER, BUBBLER OR EMITTER OUTLET PER PLAN
AutoCAD SHX Text
1
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
6
AutoCAD SHX Text
M
AutoCAD SHX Text
5
AutoCAD SHX Text
4
AutoCAD SHX Text
7
AutoCAD SHX Text
11
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
10
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
14
AutoCAD SHX Text
15
WIRE PULL-BOX
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
12"
AutoCAD SHX Text
NOTES: 1. IF A SPLICE IS NOT NEEDED AT BOX LOCATION, CONTRACTOR SHALL IF A SPLICE IS NOT NEEDED AT BOX LOCATION, CONTRACTOR SHALL PROVIDE A 12" COILED LOOP OF EXTRA WIRE IN BOX FOR FUTURE USE.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
WIRE SPLICE WITH PENN-TITE PN SERIES WINGED YELLOW INSULATED WIRE CONNECTORS
AutoCAD SHX Text
WIRE TO INDIVIDUAL VALVES
AutoCAD SHX Text
PAVING
AutoCAD SHX Text
LAYER OF PEA GRAVEL
AutoCAD SHX Text
SLEEVE PIPE
AutoCAD SHX Text
10" DIA BOX WITH T-COVER LID AND BOLT DOWN OPTION 1" OR 1- " SET ABOVE 12" SET ABOVE FINISH GRADE
AutoCAD SHX Text
ALTERNATIVE METHODS FOR MARKING SLEEVE LOCATION: 1. STAMP BACK OF CURB WITH AN 'S' FOR NEW CONCRETE STAMP BACK OF CURB WITH AN 'S' FOR NEW CONCRETE 2. RETROFIT PROJECT WILL REQUIRE 'S' TO BE ETCHED BACK OF CURBRETROFIT PROJECT WILL REQUIRE 'S' TO BE ETCHED BACK OF CURB
AutoCAD SHX Text
PROVIDE 12" COILED LOOP OF EXTRA WIRE IF SPLICE IS NOT REQUIRED
AutoCAD SHX Text
BACK OF CURB
WIRELESS GATEWAY ASSEMBLY
EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
OMNI ANTENNA
AutoCAD SHX Text
WIN-300
AutoCAD SHX Text
GROUND
AutoCAD SHX Text
120VAC
AutoCAD SHX Text
ASSEMBLY
AutoCAD SHX Text
LWR-400 CABLE
AutoCAD SHX Text
NTS
AutoCAD SHX Text
CELLULAR ROUTER
AutoCAD SHX Text
LINK GATEWAY
AutoCAD SHX Text
SURGE SUPPRESSOR
AutoCAD SHX Text
POWER SUPPLY
AutoCAD SHX Text
ETHERNET
WIRELESS VALVE ASSEMBLY
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
STANDARD VALVE BOX
AutoCAD SHX Text
3M DBY SPLICE KITS (1)
AutoCAD SHX Text
ANTENNA
AutoCAD SHX Text
COIL 12" EXTRA WIRE IN VALVE BOX 12" RND DRY BOX
AutoCAD SHX Text
SOLENOID VALVE
AutoCAD SHX Text
3M DBY SPLICE KITS (2)
AutoCAD SHX Text
14 5/8"
AutoCAD SHX Text
ANTENNA
AutoCAD SHX Text
STANDARD VALVE BOX
AutoCAD SHX Text
SOLENOID VALVE
AutoCAD SHX Text
3M DBY SPLICE KITS (2)
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
TOP VIEW
AutoCAD SHX Text
DISTANCE PER MANUF. SPECIFICATIONS
AutoCAD SHX Text
NTS
CACTUS PLANTING
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
(SEE PLANS)
AutoCAD SHX Text
TYP. 2" GRANITE MULCH, 1" OVER PLANT PIT WHERE GRANITE IS SHOWN ON PLAN.
AutoCAD SHX Text
6" MIN.
AutoCAD SHX Text
3" MOUND
AutoCAD SHX Text
1"
AutoCAD SHX Text
NTS
AutoCAD SHX Text
BACKFILL WITH DRY SITE SOIL ONLY
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
1. ROOT PRUNE ALL SHREDDED OR DAMAGED ROOTS. ROOT PRUNE ALL SHREDDED OR DAMAGED ROOTS. 2. ENSURE ALL WOUNDS TO THE ROOT SYSTEM ENSURE ALL WOUNDS TO THE ROOT SYSTEM ARE CLEAN CUT BEFORE PLANTING. APPLY DUSTING SULFUR TO ALL AREAS BELOW GRADE. 3. PLANT PIT SHALL BE 3 TIMES THE DIAMETER OF PLANT PIT SHALL BE 3 TIMES THE DIAMETER OF ROOTS AND NO DEEPER THAN THE EXTENSION OF THE ROOTS BACKFILL PIT WITH 6" LAYERS OF RODDED, COMPACTED 1/3 GOLF SAND AND 2/3 DRY SITE SOIL MIX. 4. USE 3"-4" ROCKS/RIP RAP TO ANCHOR ROOTS. USE 3"-4" ROCKS/RIP RAP TO ANCHOR ROOTS. 5. PLANTING DEPTH SHALL BE THE DEPTH AT WHICH PLANTING DEPTH SHALL BE THE DEPTH AT WHICH PLANT WAS GROWN OR DEEPER BUT THE TAPERING OF THE ROOT COLLAR MUST BE VISIBLE. 6. ENSURE SURFACE WATER CAN NOT STAND ENSURE SURFACE WATER CAN NOT STAND AGAINST THE ROOT COLLAR. SLOPE GRADE AWAY FROM BASE OF CACTUS. 7. ALL CACTUS PLACEMENT SHALL MATCH ORIGINAL ALL CACTUS PLACEMENT SHALL MATCH ORIGINAL ORIENTATION W/ORIGINAL NORTH SIDE FACING NORTH. 8. DO NOT WATER FOR THREE WEEKS FOLLOWING DO NOT WATER FOR THREE WEEKS FOLLOWING PLANTING. 9. WATER WEEKLY THROUGHOUT THE SUMMER. WATER WEEKLY THROUGHOUT THE SUMMER. MAINTAIN ORIGINAL GROWING ORIENTATION.
DECOMPOSED GRANITE
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTES: 1. DECOMPOSED GRANITE FINISH GRADE TO BE RAKED SMOOTH. DG FINISH GRADE SHALL BE 1-1/2" DECOMPOSED GRANITE FINISH GRADE TO BE RAKED SMOOTH. DG FINISH GRADE SHALL BE 1-1/2" BELOW ALL ADJACENT PAVING/CURBS. 2. SUBMIT CERTIFIED PESTICIDE APPLICATOR'S LICENSE PRIOR TO CONSTRUCTION. SUBMIT PRODUCT SUBMIT CERTIFIED PESTICIDE APPLICATOR'S LICENSE PRIOR TO CONSTRUCTION. SUBMIT PRODUCT LABEL FOR APPROVAL. 3. APPLY PRE-EMERGENT HERBICIDE PER MANUFACTURER INSTRUCTIONS. TWO (2) APPLICATIONS ARE APPLY PRE-EMERGENT HERBICIDE PER MANUFACTURER INSTRUCTIONS. TWO (2) APPLICATIONS ARE REQUIRED. ONE BEFORE PLACEMENT OF D.G. (AFTER SUBGRADE HAS BEEN APPROVED) AND ONE AFTER SPREADING D.G.. CERTIFIED PESTICIDE APPLICATOR SHALL CONDUCT APPLICATION. LICENSE AND NOTIFICATION OF APPLICATION SHALL BE PROVIDED MIN. 48 HOURS IN ADVANCE OF APPLICATION. WATER IN EACH APPLICATION PER MANUFACTURER'S INSTRUCTIONS. 4. D.G. SIZE/STYLE AS SPECIFIED ON PLANT LEGEND.D.G. SIZE/STYLE AS SPECIFIED ON PLANT LEGEND.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
SIDEWALK, CURB OR PAVING
AutoCAD SHX Text
SURFLAN PRE-EMERGENT APPLICATION AFTER FINE RAKING OF D.G. WATER IN THOROUGHLY.
AutoCAD SHX Text
2" DEPTH DECOMPOSED GRANITE
AutoCAD SHX Text
FINE GRADED SUBGRADE
GROUNDCOVERS
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
ALL GROUNDCOVERS TO BE PLANTED ON CENTER (SEE PLANT LEGEND) IN A TRIANGULAR PATTERN. X = O.C. DIMENSION AS NOTED ON PLAN Y = 0.86 OF DIMENSION "X"
AutoCAD SHX Text
X
AutoCAD SHX Text
X
AutoCAD SHX Text
NTS
AutoCAD SHX Text
MULCH SOIL TO A DEPTH OF 2", 1' IN DIAMETER. KEEP MULCH 2" AWAY FROM PLANT BASE.
AutoCAD SHX Text
BACKFILL WITH NATIVE SOIL. APPLY FERTILIZER TO SURFACE AWAY FROM TRUNK PER SPECIFICATIONS.
AutoCAD SHX Text
PREPARE SOIL PER SPECIFICATIONS AND ROTOTILL TO A DEPTH OF 6" PRIOR TO ANY SPRINKLER WORK.
PALM TREE PLANTING
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
120
AutoCAD SHX Text
120
AutoCAD SHX Text
120
AutoCAD SHX Text
DEPTH OF PIT EQUAL TO DEPTH OF ROOTBALL
AutoCAD SHX Text
* SUB GRADE TO BE 3" BELOW TOP OF WALK BEFORE INSTALLATION OF DECOMPOSED GRANITE. PLACE TOP OF ROOTBALL AT SUB GRADE LEVEL
AutoCAD SHX Text
NOTES: TRANSPORTING AND SETTING: 1. 4" MIN WIDTH NYLON STRAPS TO BE USED 4" MIN WIDTH NYLON STRAPS TO BE USED FOR TRANSPORTING, MOVING AND SETTING PALMS. IF IMPROPER STRAPS ARE USED, CONTRACTOR SHALL BE RESPONSIBLE TO REPLACE TREE IF SCARRING ON TRUNK OCCURS. 2. PLACE STRAPS AT MINIMUM TWO POINTS ALONG TRUNK PLACE STRAPS AT MINIMUM TWO POINTS ALONG TRUNK TO EVENLY SUPPORT WEIGHT AND PREVENT TRUNK FROM BENDING OR BOWING DURING SETTING AND TRANSPORT IF TRUNKS ARE DEFORMED DUE TO IMBALANCED SUPPORT, CONTRACTOR SHALL BE RESPONSIBLE TO REPLACE TREES. 3. PALMS SHALL BE GENTLY SET INTO PLANTING PIT AND PALMS SHALL BE GENTLY SET INTO PLANTING PIT AND NOT BE DROPPED AT ANY TIME DURING THE TRANSPORTING AND SETTING PROCESS. IF PALMS ARE DROPPED THEY WILL BE REJECTED AND REPLACED BY CONTRACTOR. PLANTING: 1. IF MATCHED TRUNK HEIGHTS ARE NEEDED, PURCHASE IF MATCHED TRUNK HEIGHTS ARE NEEDED, PURCHASE MATCHING TRUNK HEIGHTS. DO NOT OVER BURY PALMS TO ACHIEVE MATCHING TRUNK HEIGHTS. 2. PROTECT APICAL AND BASE MERISTEM THROUGHOUT PROTECT APICAL AND BASE MERISTEM THROUGHOUT TRANSPORTING AND PLANTING PROCESS. PROCESS. 3. DO NOT BURY AERIAL ROOT ZONE.DO NOT BURY AERIAL ROOT ZONE.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
PALMS TO BE TIED WITH HEMP TYPE ROPE PRIOR TO TRANSPLANTING. PALM FRONDS TO REMAIN TIED UNTIL HEMP BREAKS OR UNTIL NEW SPEAR EMERGES FROM CENTER. OWNER'S REP. TO APPROVE PRIOR TO TIE REMOVAL IF HEMP ROPE WAS NOT USED. ARRANGE TO UNTIE AFTER SPEAR HAS EMERGED FROM CENTER.
AutoCAD SHX Text
MAINTAIN PALMS SO THAT BASE OF FRONDS OCCUR FROM THE '10 O'CLOCK THRU THE 2 O'CLOCK POSITION. DO NOT OVER TRIM PALM FRONDS DURING MAINTENANCE OR AFTER PROJECT IS ACCEPTED BY OWNER.
AutoCAD SHX Text
2-2"X4" @ 12" LONG NAIL 2"X4" TP STEPPED 2"X4"
AutoCAD SHX Text
SKIN TRUNK CLEAN ON WASHINGTONIA ROBUSTA. DIAMOND CUT DATE PALMS OR AS OTHERWISE SPECIFED BY PLANT LEGEND.
AutoCAD SHX Text
TOP OF ROOT BALL TO BE AT TOP OF SUBGRADE, JUST BELOW D.G.
AutoCAD SHX Text
BASE MERISTEM TO BE PRESENT IN ALL IMPORTED PALMS PROTECT DURING PLANTING--DO NOT CUT ROOTBALL.
AutoCAD SHX Text
MAINTAIN MIN 4" - 6" SOIL LIP BEYOND TRUNK ON ALL SIDES. IRRIGATION SHALL BE PLACED DIRECTLY OVER THIS LIP TO EVENLY DISTRIBUTE WATER TO ROOTBALL. DO NOT OVER WATER.
AutoCAD SHX Text
2" x 4" STAKE TOENAIL TOGETHER
AutoCAD SHX Text
2" x 4" STAKE WOODEN BRACE
AutoCAD SHX Text
METAL STRAP
AutoCAD SHX Text
2"x4" WOODEN BRACE
AutoCAD SHX Text
TRUNK
AutoCAD SHX Text
METAL STRAP
AutoCAD SHX Text
PLANTING PIT MIN. 2X DIA. OF ROOTBALL
AutoCAD SHX Text
BACKFILL TO BE CLEAN SAND.
AutoCAD SHX Text
IRRIGATION: 1. PLACE IRRIGATION DIRECTLY OVER ROOT BALL PLACE IRRIGATION DIRECTLY OVER ROOT BALL SOIL, EVENLY SPACE AROUND BASE. AROUND BASE. 2. WATER SO THAT 80% OF FIELD CAPACITY IS WATER SO THAT 80% OF FIELD CAPACITY IS MAINTAINED. ADJUST FOR SOIL TYPE. 3. ADJUST WATERING FOR SEASONAL NEEDS. ADJUST WATERING FOR SEASONAL NEEDS. 4. DO NOT USE VERTICAL PVC AND PEA GRAVEL.DO NOT USE VERTICAL PVC AND PEA GRAVEL.
SHRUB PLANTING
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
NOTES: 1. PLANT PITS SHALL NOT BE AUGER DUG. SIDES OF PLANT PITS SHALL NOT BE AUGER DUG. SIDES OF PIT SHALL BE RAKED TO LOOSEN PRIOR TO SETTING TREE IN PITS. 2. GENTLY LOOSEN ROOTS AROUND EXTERIOR OF GENTLY LOOSEN ROOTS AROUND EXTERIOR OF ROOTBALL. 3. DO NOT PLANT ROOT BOUND PLANTS. NOTIFY DO NOT PLANT ROOT BOUND PLANTS. NOTIFY LANDSCAPE ARCHITECT IMMEDIATELY TO VERIFY CONDITION OF PLANT IF ANY QUESTION. 4. REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR TO PLANTING. 5. DO NOT PRUNE NEW PLANTS WITHOUT LANDSCAPE DO NOT PRUNE NEW PLANTS WITHOUT LANDSCAPE ARCHITECT APPROVAL/DIRECTION.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
PLANTING PIT TO BE 3X THE WIDTH OF THE ROOT BALL. CENTER SHRUB IN PLANTING PIT. DO NOT OVER-EXCAVATE FOR DEPTH OF PLANTING PIT TO AVOID SETTLING. FERTILIZER: 16:20:0 AMMONIUM PHOSPHATE FOR NON DESERT PLANTS. MIX INTO BACKFILL. DO NOT SPREAD ON TOP OF SOIL.
AutoCAD SHX Text
PLACE BUBBLE OR EMITTER SO TOP IS JUST BELOW D.G. FINISH GRADE
AutoCAD SHX Text
NATURAL GRADE
AutoCAD SHX Text
DECOMPOSED GRANITE, 2" (TYPE "A")
TREE PLANTING & STAKING
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
PLANTING NOTES: 1. SIDES OF PLANTING PITS ARE TO BE SIDES OF PLANTING PITS ARE TO BE LOOSENED OR RAKED BEFORE SETTING TREE IN PIT. 2. EXCAVATE DEPTH OF PLANTING PIT TO THE EXCAVATE DEPTH OF PLANTING PIT TO THE SAME DEPTH AS THE ROOTBALL. 3. THE WIDTH OF THE PLANTING PIT SHALL BE 2 THE WIDTH OF THE PLANTING PIT SHALL BE 2 X THE WIDTH OF THE ROOTBALL GENTLY LOOSEN ROOTS AROUND EXTERIOR OF ROOTBALL. CENTER TREE IN PLANTING PIT. 4. INSPECT ROOT BALLS AT POINT OF PURCHASE INSPECT ROOT BALLS AT POINT OF PURCHASE TO AVOID PURCHASE OF ROOT BOUND MATERIALS. REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR TO PLANTING. PLANTING. 5. NEW TREES SHALL NOT BE PRUNED UNLESS NEW TREES SHALL NOT BE PRUNED UNLESS DIRECTED BY OWNER. FORM SWALE AROUND EACH TREE AS SHOWN FOR WATER COLLECTION. REMOVE ALL NURSERY STAKES.BACKFILL NOTES: 1. PROVIDE MULCH AMENDMENT WITH BACKFILL PROVIDE MULCH AMENDMENT WITH BACKFILL FOR NON-DESERT TREES. 2. BACKFILL MIX SHALL CONSIST OF 3 PARTS BACKFILL MIX SHALL CONSIST OF 3 PARTS NATIVE SOIL TO 1 PART MULCH. 3. PROVIDE 1 CUP GYPSUM IN BOTTOM OF PROVIDE 1 CUP GYPSUM IN BOTTOM OF PLANTING PIT. 4. INCLUDE 16:20:0 AMMONIUM PHOSPHATE INCLUDE 16:20:0 AMMONIUM PHOSPHATE FERTILIZER IN PLANTING PIT FOR NON-DESERT TREES. MIX INTO BACKFILL. DO NOT SPREAD ON TOP OF SOIL.
AutoCAD SHX Text
NTS MULTI TRUNK TREE PLANTING & STAKE DETAIL
AutoCAD SHX Text
DETAIL A. WIRE & HOSE TIES
AutoCAD SHX Text
STAKING NOTES: 1. USE 2- 2" DIA. LODGE POLE STAKES- USE 2- 2" DIA. LODGE POLE STAKES- DOUG FIR, OR APPROVED HARDWOOD. 2. DRIVE STAKE MIN 12" INTO FIRM DRIVE STAKE MIN 12" INTO FIRM UNDISTURBED SOIL BELOW THE EXCAVATED DEPTH. 3. PLACE STAKES OUTSIDE THE ROOTBALL. PLACE STAKES OUTSIDE THE ROOTBALL. 4. HEIGHT OF STAKE MAY VARY DEPENDING ON NEED HEIGHT OF STAKE MAY VARY DEPENDING ON NEED FOR SUPPORT. 5. PLACE THE TOP TIE FOR MAXIMUM SUPPORT. THE PLACE THE TOP TIE FOR MAXIMUM SUPPORT. THE BOTTOM TIE SHOULD BE APPROXIMATELY WAY 12 WAY BETWEEN THE TOP TIE AND GROUND. 6. ALWAYS PLACE STAKE TO PREVENT DAMAGE TO ALWAYS PLACE STAKE TO PREVENT DAMAGE TO TREE AND CAMBIUM. MISC. NOTES: 1. REMOVE ALL PLASTIC TREE TIE TAPE, BAMBOO REMOVE ALL PLASTIC TREE TIE TAPE, BAMBOO NURSERY STAKE, WIRE TIES, AND LABELS FROM TREES AFTER THEY HAVE BEEN APPROVED. 2. BACKFILL ANY HOLES LEFT IN ROOTBALL LEFT BACKFILL ANY HOLES LEFT IN ROOTBALL LEFT FROM NURSERY STAKES. BACKFILL SHALL BE CLEAN SOIL, NOT D.G. 3. SWALE SHALL BE A SMOOTH TRANSITION-NO SWALE SHALL BE A SMOOTH TRANSITION-NO ABRUPT GRADE CHANGES 4. SWALE SHALL BE WATER TESTED FOR WATER SWALE SHALL BE WATER TESTED FOR WATER HOLDING CAPACITY PRIOR TO PLACING D.G. 5. PROVIDE ADDITIONAL WIRE HOSE TIE WHEN THE PROVIDE ADDITIONAL WIRE HOSE TIE WHEN THE TREE IS NOT RIGIDLY SUPPORTED BY THE TWO REQUIRED SUPPORTS. 6. 2-3" MULCH TOP LAYER, NOT AROUND BASE. 1" 2-3" MULCH TOP LAYER, NOT AROUND BASE. 1" D.G. TOP LAYER ALSO SUITABLE.
AutoCAD SHX Text
STAKES OUTSIDE ROOT BALL UNDER LOWEST PERMANENT BRANCHES
AutoCAD SHX Text
ADDITIONAL HOSE TIE
AutoCAD SHX Text
SOIL BERM TO HOLD WATER; FLATTEN OUT AFTER 1 YEAR
AutoCAD SHX Text
WIRE TO STAKE W/ HEAVY DUTY STAPLE (12 GAUGE WIRE)
AutoCAD SHX Text
SET ROOT BALL 1" ABOVE GRADE. 6' WIDE SWALE FOR WATER COLLECTION.
AutoCAD SHX Text
PLACE BUBBLER OR EMITTER AT INSIDE EDGE OF SWALE SO TOP IS BELOW D.G.
AutoCAD SHX Text
ROOT BALL
AutoCAD SHX Text
12" I.D. RUBBER HOSE, LOOPED WITH WIRE
AutoCAD SHX Text
TREE TRUNK
AutoCAD SHX Text
2" DIAM. WOOD STAKE
AutoCAD SHX Text
TREE CANOPY EXTENT
AutoCAD SHX Text
ROOT BALL ZONE
AutoCAD SHX Text
12-GAUGE GALV. OR ANNEALED WIRE. (ARBOR TAPE PREF.) ROOT BALL ZONE
SINGLE-TRUNK TREE PLANTING & STAKING
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
PLANTING NOTES: 1. SIDES OF PLANTING PITS ARE TO BE SIDES OF PLANTING PITS ARE TO BE LOOSENED OR RAKED BEFORE SETTING TREE IN PIT. 2. EXCAVATE DEPTH OF PLANTING PIT TO THE EXCAVATE DEPTH OF PLANTING PIT TO THE SAME DEPTH AS THE ROOTBALL. 3. THE WIDTH OF THE PLANTING PIT SHALL BE THE WIDTH OF THE PLANTING PIT SHALL BE 2X THE WIDTH OF THE ROOTBALL 4. GENTLY LOOSEN ROOTS AROUND EXTERIOR GENTLY LOOSEN ROOTS AROUND EXTERIOR OF ROOTBALL. 5. CENTER TREE IN PLANTING PIT. CENTER TREE IN PLANTING PIT. 6. INSPECT ROOT BALLS AT POINT OF INSPECT ROOT BALLS AT POINT OF PURCHASE TO AVOID PURCHASE OF ROOT BOUND MATERIALS 7. REMOVE ENTIRE CONTAINER FROM ALL REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR TO PLANTING. 8. NEW TREES SHALL NOT BE PRUNED UNLESS NEW TREES SHALL NOT BE PRUNED UNLESS DIRECTED BY OWNER. 9. FORM SWALE AROUND EACH TREE AS SHOWN FORM SWALE AROUND EACH TREE AS SHOWN FOR WATER COLLECTION. 10. REMOVE ALL NURSERY STAKES. REMOVE ALL NURSERY STAKES. BACKFILL NOTES: 1. PROVIDE MULCH AMENDMENT WITH BACKFILL PROVIDE MULCH AMENDMENT WITH BACKFILL FOR NON-DESERT TREES. 2. BACKFILL MIX SHALL CONSIST OF 3 PARTS BACKFILL MIX SHALL CONSIST OF 3 PARTS NATIVE SOIL TO 1 PART MULCH. PROVIDE 1 CUP GYPSUM IN BOTTOM OF PLANTING PIT 3. INCLUDE 16:20:0 AMMONIUM PHOSPHATE INCLUDE 16:20:0 AMMONIUM PHOSPHATE FERTILIZER IN PLANTING PIT FOR NON DESERT TREES. MIX INTO BACKFILL. DO NOT SPREAD ON TOP OF SOIL.
AutoCAD SHX Text
STAKING NOTES: 1. USE 2- 2" DIA. LODGE POLE STAKES- USE 2- 2" DIA. LODGE POLE STAKES- DOUGLAS FIR OR APPROVED HARDWOOD. 2. DRIVE STAKE MIN 12" INTO FIRM DRIVE STAKE MIN 12" INTO FIRM UNDISTURBED SOIL BELOW THE EXCAVATED DEPTH. 3. PLACE STAKES OUTSIDE THE ROOTBALL. PLACE STAKES OUTSIDE THE ROOTBALL. 4. HEIGHT OF STAKE MAY VARY DEPENDING ON HEIGHT OF STAKE MAY VARY DEPENDING ON NEED FOR SUPPORT. 5. PLACE THE TOP TIE FOR MAXIMUM SUPPORT. PLACE THE TOP TIE FOR MAXIMUM SUPPORT. THE BOTTOM TIE SHOULD BE APPROXIMATELY HALFWAY BETWEEN THE TOP TIE AND GROUND. 6. ALWAYS PLACE STAKE TO PREVENT DAMAGE ALWAYS PLACE STAKE TO PREVENT DAMAGE TO TREE AND CAMBIUM. MISC. NOTES: 1. REMOVE ALL PLASTIC TREE TIE TAPE, REMOVE ALL PLASTIC TREE TIE TAPE, BAMBOO NURSERY STAKE, WIRE TIES, AND LABELS FROM TREES AFTER THEY HAVE BEEN APPROVED. 2. BACKFILL ANY HOLES LEFT IN ROOTBALL BACKFILL ANY HOLES LEFT IN ROOTBALL LEFT FROM NURSERY STAKES. BACKFILL SHALL BE CLEAN SOIL, NOT D.G. 3. SWALE SHALL BE A SMOOTH TRANSITION-NO SWALE SHALL BE A SMOOTH TRANSITION-NO ABRUPT GRADE CHANGES. 4. SWALE SHALL BE WATER TESTED FOR WATER SWALE SHALL BE WATER TESTED FOR WATER HOLDING CAPACITY PRIOR TO PLACING D.G. 5. PROVIDE ADDITIONAL WIRE HOSE TIE WHEN PROVIDE ADDITIONAL WIRE HOSE TIE WHEN THE TREE IS NOT RIGIDLY SUPPORTED BY THE TWO REQUIRED SUPPORTS. 6. 2-3" MULCH TOP LAYER, NOT AROUND BASE. 2-3" MULCH TOP LAYER, NOT AROUND BASE. 1" D.G. TOP LAYER ALSO SUITABLE.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
DETAIL A. WIRE & HOSE TIES
AutoCAD SHX Text
WIRE TO STAKE W/HEAVY DUTY STAPLE (12-GAUGE WIRE)
AutoCAD SHX Text
STAKES OUTSIDE ROOT BALL UNDER LOWEST PERMANENT BRANCHES
AutoCAD SHX Text
ADDITIONAL HOSE TIE
AutoCAD SHX Text
SOIL BERM TO HOLD WATER. FLATTEN OUT AFTER 1 YEAR.
AutoCAD SHX Text
1/2" I.D. RUBBER HOSE TIE, LOOPED WITH 12 GA. WIRE. MAINTAIN 12" I.D. LOOP MIN. FOR TREE. USE 12 GA. DOUBLE STRAND GALV. ANNEALED, OR ZINC COATED WIRE TO TIE DOWN TREE. SEE DETAIL A.
AutoCAD SHX Text
LOCATE TOP TIE ABOVE FIRST SCAFFOLD
AutoCAD SHX Text
SET ROOTBALL 1" ABOVE GRADE. SWALE FOR WATER COLLECTION.
AutoCAD SHX Text
PLACE BUBBLER OR EMITTER AT INSIDE BUBBLER OR EMITTER AT INSIDE EDGE OF SWALE, SO TOP IS BELOW D.G.SO TOP IS BELOW D.G.
AutoCAD SHX Text
12" I.D. RUBBER HOSE, LOOPED WITH WIRE
AutoCAD SHX Text
2" DIAM. WOOD STAKE
AutoCAD SHX Text
TREE TRUNK
AutoCAD SHX Text
ROOT BALL ZONE
AutoCAD SHX Text
TREE CANOPY EXTENT
AutoCAD SHX Text
12-GAUGE GALV. OR ANNEALED WIRE. (ARBOR TAPE PREF.)
PLANTING ON SLOPE
EV 1: 08-11-2018COP St r ee t s Dep t .
AutoCAD SHX Text
NOTES: 1. PLANT PITS SHALL NOT BE AUGER DUG. SIDES OF PIT SHALL BE RAKED TO LOOSEN PRIOR TO SETTING TREE IN PLANT PITS SHALL NOT BE AUGER DUG. SIDES OF PIT SHALL BE RAKED TO LOOSEN PRIOR TO SETTING TREE IN PITS. 2. GENTLY LOOSEN ROOTS AROUND EXTERIOR OF ROOTBALL. GENTLY LOOSEN ROOTS AROUND EXTERIOR OF ROOTBALL. 3. DO NOT PLANT ROOT BOUND PLANTS. NOTIFY LANDSCAPE ARCHITECT IMMEDIATELY TO VERIFY CONDITION OF DO NOT PLANT ROOT BOUND PLANTS. NOTIFY LANDSCAPE ARCHITECT IMMEDIATELY TO VERIFY CONDITION OF PLANT IF ANY QUESTION. 4. REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR TO PLANTING. REMOVE ENTIRE CONTAINER FROM ALL PLANTS PRIOR TO PLANTING. 5. DO NOT PRUNE NEW PLANTS WITHOUT LANDSCAPE ARCHITECT APPROVAL/DIRECTION.DO NOT PRUNE NEW PLANTS WITHOUT LANDSCAPE ARCHITECT APPROVAL/DIRECTION.
AutoCAD SHX Text
4:1 MAX. SLOPE
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NATURAL GRADE
AutoCAD SHX Text
DECOMPOSED GRANITE 2" DEEP (TYPE A)
AutoCAD SHX Text
PLACE BUBBLER BUBBLER OR EMITTER SO SO TOP IS BELOW D.G. ON UPHILL SIDE ON UPHILL SIDE OF SLOPE
AutoCAD SHX Text
4' SWALE FOR TREES & SHRUBS
AutoCAD SHX Text
4"
AutoCAD SHX Text
PLANTING PIT TO BE 3X THE WIDTH OF THE ROOT BALL. CENTER SHRUB IN PLANTING PIT. DO NOT OVER EXCAVATE FOR DEPTH OF PLANTING PIT TO AVOID SETTLING. FERTILIZER: MAG SPECIFICATIONS SECTION 430.10 AND 795.3
SOD INSTALLATION
EV 1: 08-11-2018COP St r ee t s Dep t .
AutoCAD SHX Text
NOTES: 1. ROUGH GRADE, REMOVE ALL DEBRIS ROUGH GRADE, REMOVE ALL DEBRIS AND UNDESIRED VEGETATION CHEMICALLY AND PHYSICALLY USING APPROVED CHEMICALS AND LICENSED APPLICATORS. 2. PROVIDE SOILS TEST FROM CERTIFIED PROVIDE SOILS TEST FROM CERTIFIED LAB TO INCLUDE PH, AND ELEMENTS IN SOIL. FURNISH TEST RESULTS TO OWNER REPRESENTATIVE. 3. PROVIDE SOIL ADDITIVES AS PROVIDE SOIL ADDITIVES AS RECOMMENDED BY SOILS TEST, INCLUDE IN SUBMITTAL REVIEW FOR PROJECT. 4. APPLY GYPSUM UNIFORMLY OVER APPLY GYPSUM UNIFORMLY OVER IMPORTED TOP SOIL AT A RATE OF 10 POUNDS PER 100 SQUARE FT OF TURF AREA. 5. ROTOTILL GYPSUM, FERTILIZER, AND ROTOTILL GYPSUM, FERTILIZER, AND CLEAN TOPSOIL MIX TO MINIMUM 6" DEPTH INTO EXISTING SOIL. LEVEL GRADE, RAKE SMOOTH, REMOVE ROCK OR OTHER DEBRIS PARTICLES LARGER THAN 1 " FROM SITE. COMPACT AND 12" FROM SITE. COMPACT AND TO 80%.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
SIDEWALK, CURB OR PAVING
AutoCAD SHX Text
FINISH GRADE-BASE OF SOD 1" BELOW TOP OF SIDEWALK
AutoCAD SHX Text
TILL 4" IMPORTED CLEAN FILL, SAND, AND GYPSUM INTO TOP 8" OF SOIL
AutoCAD SHX Text
LEVEL SUBGRADE MAXIMUM 80% COMPACTION
AutoCAD SHX Text
BUTT SOD ENDS TIGHTLY STAGGER STRIPS. ROLL WITH ROLLER. KEEP MOIST
AutoCAD SHX Text
GRADE TO BE APPROVED BY CLIENT REPRESENTATIVE. THOROUGHLY WATER THE PLANTING AREA WITHIN 2 HOURS OF LAYING SOD. LAY SOD IN MORNING HOURS AND WITHIN 1 DAY OF ARRIVAL ON SITE. KEEP STACKED SOIL MOIST. LAY SOD END TO END AND STAGGERED BETWEEN ROWS, WATER THOROUGHLY AND ROLL WITH WATER FILLED ROLLER. WATER SOD TO MAINTAIN MOISTURE AND PROMOTE ROOTING. REPLACE SOD THAT HAS DRIED OUT, DISCOLORED, OR DIED, IMMEDIATELY. MAINTAIN MOISTURE ON ALL SOD AND ADJUST FOR SEASON. REFER TO RETENTION BASIN NOTES IF INSTALLING LANDSCAPING OR SOD IN RETENTION BASINS
AutoCAD SHX Text
6.
AutoCAD SHX Text
7.
AutoCAD SHX Text
8.
AutoCAD SHX Text
9.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
STEEL HEADER
EV 1: 08-11-2018COP St r eet s Dept .
AutoCAD SHX Text
NTS
AutoCAD SHX Text
16" LONG STEEL STAKES AT ALL JOINTS, CORNERS AND 4'-0" O.C. ON STRAIGHT RUNS
AutoCAD SHX Text
TYPICAL JOINT WELD ALL JOINTS
AutoCAD SHX Text
16" LONG STEEL STAKES
AutoCAD SHX Text
316" X 4" STEEL EDGE
AutoCAD SHX Text
D.G. PLANTING AREA PLANTING AREA
AutoCAD SHX Text
TURF
SWALE - BACK OF SIDEWALK
EV 1: 08-11-2018COP St r eet s Dep t .
AutoCAD SHX Text
FINE GRADE TO CREATE RETENTION SWALE. SWALE TO BE APPROVED PRIOR TO PLANTING AND/OR PLACING TURF OR D.G.
AutoCAD SHX Text
SLOPE NOT TO EXCEED 4:1 TO BLOCK WALLS
AutoCAD SHX Text
NTS
AutoCAD SHX Text
TOP OF PAVEMENT OR CURB