redrock micro 1 title: ultra event for canon eos c300/c500...
TRANSCRIPT
12" CarbonFiber Rod
ultraCage
9" CarbonFiber Rod
microBrace
microBraceRetainer KnobmicroMount
Hand GripsmicroFollowFocus | blue
powerPack
Top Handleand Thumbscrew
2x 6” CarbonFiber Rods
DoubleTap
http://start.redrockmicro.comTutorials, forums, customer support
ultra Event BASIC Bundle Components
ultra Event for Canon EOS C300/C500 SETUP GUIDEREDROCK MICRO
Title: Scene:
Company: Pages: of
Date:
1
04.01.12
1
create the cinema experience
ultra Event Additional Options
D
AC
B
E
F
G
HE: Attach Top Handle. See above note.F: Insert 6” Carbon Fiber Rods into ultraCage.G: Attach microFollowFocus | blue to rig and microLens Gear to camera lens.H: Screw powerPack into place on cage.
ultra Event BASIC and DELUXE Bundles
ADDITIONAL OPTIONS
COMPLETE BASIC ultra Event ASSEMBLY Note: when using Top Handle, Triangle knob screw replaces 1/4-20 x 3/8” screw at top of cage into camera.
A: Attach microBrace to microMount by tightening Retainer knob. B: Insert 12” and 9” Carbon Fiber Rods into ultraCage as shown.
C: Tighten microMount with microBrace onto 12” Rod.D: Add Blue Handgrips to both rods in front.