recommended cleaning & care - buzil.com · linoleum, a natural product, becomes porous, meaning...

BUZIL-WERK Wagner GmbH & Co. KG 1 Recommended Cleaning & Care PERFECTLY CLEAN - FOR SURE Pick up loose dirt, and remove any mort- ar, plaster residue, and colour stains manually using a scraper. Dirt Treatment Cleaning device RESIDUE FROM CARE PRODUCTS in the form of coatings and care products can be removed using Corridor® Unic Ultra S 707, Corridor® Power Stripper S 708 or Planta® Multi Stripper P 321. Apply the cleaning solution evenly over the floor, and leave it to work for appro- ximately 10 to 15 minutes. PLEASE NOTE: Do not allow the cleaning solution to dry. Deep clean the covering using a sing- le-disc machine and a blue pad. Pick up the loosened dirt using a wet vacuum cleaner, and rinse with water. PLEASE NOTE: leave the floor to dry com- pletely (up to 24 hours). Linoleum consists of natural materials. To produce it, linseed oil is blended with natural resins, wood and cork dust, inorganic fillers, and colour pigments. This mass is put under pressure and pressed onto a jute fabric. Linoleum is sensitive to alkaline cleaners and deep cleaners with a pH-value greater than 10, abrasive pads, and brushes. There are linoleum floors that exhibit discolourati- on or odours when treated just with clean water, or become so porous after deep cleaning that a drying time of at least 12-24 hours is necessary before the first coating. Residual moisture in the covering would result in the coating “powdering” or “loosening”. LINOLEUM FLOOR COVERINGS IN SPORTS AND MULTIPURPOSE HALLS, COATED CLEANING DEEP CLEANING Pick up loose dirt, and remove any mort- ar, plaster residue, and colour stains manually using a scraper. Dirt Treatment Cleaning device HEAVIER DIRT THAT IS ALKALINE-SOLUBLE like protein, oil and grease or foodstuff resi- due e.g. coffee, red wine etc. can be remo- ved by intensive cleaning using Maradin HC 43 using a two-stage wet wiping method, or mechanically. Apply the cleaning solution evenly over the floor, and leave it to work for a short time. Clean the covering using a single-disc machine and a red pad. Pick up the loosened dirt using a wet vacuum cleaner, and rinse with water. INTENSIVE CLEANING

Upload: others

Post on 11-Sep-2019

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Recommended Cleaning & Care - buzil.com · Linoleum, a natural product, becomes porous, meaning dirt can permeate its deeper layers; this dirt is then very diffi cult to remove using

BUZIL-WERK Wagner GmbH & Co. KG

1

Recommended Cleaning & Care

PERFECTLY CLEAN - FOR SURE

Pick up loose dirt, and remove any mort-ar, plaster residue, and colour stains manually using a scraper.

Dirt Treatment Cleaning device

RESIDUE FROM CARE PRODUCTS

in the form of coatings and care products can be removed using Corridor® Unic Ultra S 707, Corridor® Power Stripper S 708 or Planta® Multi Stripper P 321.

Apply the cleaning solution evenly over the fl oor, and leave it to work for appro-ximately 10 to 15 minutes.PLEASE NOTE: Do not allow the cleaning solution to dry.

Deep clean the covering using a sing-le-disc machine and a blue pad.

Pick up the loosened dirt using a wet vacuum cleaner, and rinse with water.PLEASE NOTE: leave the fl oor to dry com-pletely (up to 24 hours).

Linoleum consists of natural materials. To produce it, linseed oil is blended with natural resins, wood and cork dust, inorganic fi llers, and colour pigments. This mass is put under pressure and pressed onto a jute fabric. Linoleum is sensitive to alkaline cleaners and deep cleaners with a pH-value greater than 10, abrasive pads, and brushes.There are linoleum fl oors that exhibit discolourati-on or odours when treated just with clean water, or become so porous after deep cleaning that a drying time of at least 12-24 hours is necessary before the fi rst coating. Residual moisture in the covering would result in the coating “powdering” or “loosening”.

LINOLEUM FLOOR COVERINGS IN SPORTS AND MULTIPURPOSE HALLS, COATED

CLEANING

DEEP CLEANING

Pick up loose dirt, and remove any mort-ar, plaster residue, and colour stains manually using a scraper.

Dirt Treatment Cleaning device

HEAVIER DIRT THAT IS ALKALINE-SOLUBLE

like protein, oil and grease or foodstuff resi-due e.g. coffee, red wine etc. can be remo-ved by intensive cleaning using Maradin HC 43 using a two-stage wet wiping method, or mechanically.

Apply the cleaning solution evenly over the fl oor, and leave it to work for a short time.

Clean the covering using a single-disc machine and a red pad.

Pick up the loosened dirt using a wet vacuum cleaner, and rinse with water.

INTENSIVE CLEANING

Page 2: Recommended Cleaning & Care - buzil.com · Linoleum, a natural product, becomes porous, meaning dirt can permeate its deeper layers; this dirt is then very diffi cult to remove using

BUZIL-WERK Wagner GmbH & Co. KG

2

Recommended Cleaning & Care

PERFECTLY CLEAN - FOR SURE

CONTINUED: CLEANING LINOLEUM FLOOR COVERINGS

Pick up loose dirt, and remove any mort-ar, plaster residue, and colour stains manually using a scraper.

Dirt Treatment Cleaning device

RUBBER ABRASION

The solvent-containing Indumaster® Forte IR 42 cleaner is particularly well-suited to removing rubber abrasion when diluted 1:1.

PLEASE NOTE: Perform a material compatibility test before use!

Spray the product onto targeted areas.

Scrub the covering using a single-disc machine and a suitable pad.

Pick up the loosened dirt using a wet vacuum cleaner, and rinse with water.

SPECIAL CLEANING

Microfi bre cloths or pads must always be used in order to achieve a satisfactory cleaning result.

Dirt Treatment Cleaning device

ORGANIC/INORGANIC CONTAMINATION

like protein, oil and grease or foodstuff residue e.g. coffee, red wine etc.

Products certifi ed in accordance with DIN 18032/2 such as the Buz® Match Trendy T 265, Corridor® Daily S 780 or Corridor® Cibreeze Wipe S 790 wipe care products, are well-suited to daily routine cleaning in sports halls.

Manual fl oor treatment or with cleaning mashine.

DAILY ROUTINE CLEANING

CARE

PRIMING

Care Treatment Cleaning device

UV radiation, mechanical impacts and frequent deep cleaning damage the linoleum covering (linseed oils and natural resins are released). Linoleum, a natural product, becomes porous, meaning dirt can permeate its deeper layers; this dirt is then very diffi cult to remove using only daily routine cleaning. The use of a primer is recommended/necessary.

PLEASE NOTE: Corridor® Basic S 720 is not dissolved during later deep cleaning, and is therefore a permanent primer that only needs to be renewed after some years.

The application of Corridor® Basic S 720 pore fi ller/primer in 1-2 layers, depen-ding on the condition of the covering, is recommended.

Page 3: Recommended Cleaning & Care - buzil.com · Linoleum, a natural product, becomes porous, meaning dirt can permeate its deeper layers; this dirt is then very diffi cult to remove using

BUZIL-WERK Wagner GmbH & Co. KG

2/23

Recommended Cleaning & Care

PERFECTLY CLEAN - FOR SURE

The products named above are examples of usable buzil products. Always test the compatibility of the material to be treated with the cleaning or care product in an inobtrusive area fi rst. Always use our products in accordance with the content of the product information. All datasheets are available online at www.buzil.de/en. Our Application Technology team will be very happy to help if you have any questions, and can be reached by phone on +49 8331 930-6, fax on +49 8331 930-883, or email at [email protected].

BUZIL-WERK Wagner GmbH & Co. KG . Fraunhoferstraße 17 . D – 87700 Memmingen . T +49 8331 930-6 . F +49 8331 930-880, E-mail: [email protected] . www.buzil.de

CONTINUED: CARING FOR LINOLEUM FLOOR COVERINGS

INITIAL TREATMENT

Care Treatment Cleaning device

These fl oor coverings can be used in sports halls with the Corridor® Matt S 737 silky matt, DIN 18032/2-certifi ed dispersion offering protection against mechanical damage and improving the appearan-ce of the fl oor.

Apply the dispersion undiluted onto the dry, deep-cleaned fl oor in two thin layers, leaving each individual layer to dry completely.

Polishing is neither required nor recommended.