recessed diss style frontall™ outlets - class 1 inc.€¦ · 13-03-2014 · diss recessed...
TRANSCRIPT
Updated: March 13, 2014 © 1997- 2014
Class 1 Inc. | 565 Boxwood Drive | Cambridge, ON | N3E 1A5 | T: 1 (800) 242-9723 | class1inc.com
Recessed DISS Style FRONTALL™ OutletsOxygen | Vacuum | Medical Air | Nitrous Oxide | Nitrogen | Carbon Dioxide
WAGD | Instrument Air | Slide
Patented Cartridge Valve Design
Ease of Maintenance
Compensates for variation in wall thickness from ½" to 1¼"
Bilingual Labelling
ed
CRN Registered
cations
5" centres
360° swivel inlet tube
The Class 1 Inc. Frontall™ medical gas recessed outlets represent the most technically advances means of providing medical gas connections to the central piping system. The outlets incorporate a unique patented front-loaded feature which makes the outlet easy to repair, saving valuable time and money.
The outlets shall be modular singles, and shall incorporate nameplate colour coding in accordance with CSA Z7396.1/ NFPA99.
The medical gas outlets shall be designed so that, once installed, routine service of both the primary and secondary check valves can be accomplished without removing the
c portions. The primary check valve shall be utilized and of the cartridge type. So that the primary
the gas supply to the outlet, the secondary check valve shall
ow of the positive pressure gas services. There shall be no secondary check for vacuum or WAGD services. Medical gas outlets which require
c components for routine service shall not be acceptable. The seal between the nameplate and the rough-in shall be a double O-ring which is
the gas service and is capable of supporting 10 pounds @ 2" from the nameplate without leaking.
The outlet nameplate shall be permanently colour coded. The outlet trim plate shall be durable plastic, scratch resistant, have a protective label, attached with the nameplate to the rough-in assembly, and provide automatic plaster adjustment from 1/2 to 1-1/4 of an inch (1.3 cm to 3 cm). The name of the gas service shall be permanently marked on the outlet bracket and the chrome plated brass outlet body. The outlet's rough-in supply tube shall be a 7 inch (18 cm) length of 1/2 OD copper Type K, and labelled with the name of the gas service.
Medical gas outlets shall be cleaned for oxygen service in accordance with the current Compressed Gas Association (CGA) Pamphlet G-4.1, capped and placed in a protective container for shipment. The outlets shall be installed in strict accordance with manufacturer's instructions, and tested before use in conformance with local and federal codes.
Features
Updated: March 13, 2014 © 1997- 2014
Class 1 Inc. | 565 Boxwood Drive | Cambridge, ON | N3E 1A5 | T: 1 (800) 242-9723 | class1inc.com
Recessed DISS Style FRONTALL™ OutletsOxygen | Vacuum | Medical Air | Nitrous Oxide | Nitrogen | Carbon Dioxide
WAGD | Instrument Air
Ordering Information
Layout
DISS Recessed Outlets - Complete
DISS Ceiling Outlets - Complete
Medical Air Nitrous Oxide Oxygen Medical Vacuum
Nitrogen WAGD Carbon Dioxide
Instrument Air
XM1116 XM1104 XM1124A XM1122 XM1112 XM1132 XM1108 XM112080
Medical Air Nitrous Oxide Oxygen Medical Vacuum
Nitrogen WAGD Carbon Dioxide
Instrument Air
XM1216 XM1204 XM1224A XM1222 XM1212 XM1232 XM1208 XM122080