reborn software 9.01 quick installation...

10
Reborn software 9.01 quick installation guide 1) Make sure Windows operating system (in this example, Windows 8) is properly installed and configured. Check the bios sata option is set to AHCI mode. 2) Insert reborn software cd and run install.exe

Upload: dangmien

Post on 27-Jan-2019

213 views

Category:

Documents


0 download

TRANSCRIPT

Reborn software 9.01 quick installation guide 1) Make sure Windows operating system (in this example, Windows 8) is properly

installed and configured. Check the bios sata option is set to AHCI mode. 2) Insert reborn software cd and run install.exe

3) Select Express Installation and click Continue Button

4) Uncheck ‘Change Computer Name’ and Check ‘Install Driver’, then click ‘Next’ button

5) Fill in the Password, OS Name, Recovery mode, then click ‘Next’ button

6) The installation will start and wait until it prompt you to restart the pc.

7) The machine will restart twice time and will show you a welcome screen

8) Then show a boot manual (but state that it is an unregister version), then, after 4

seconds countdown, it will boot to windows system automatically.

9) After entered windows 8, go to desktop, reborn software will prompt you that it is not registered. If you are testing the reborn software and haven’t have an unlock key, just close it. It will have 30 days for trial.

Click ‘No’ to close it.

10) In the tray icon, there is a icon for reborn software showing that it is in user mode.

11) When this monitor program shows properly, the reborn function should be

working without problem. You may test the reborn function by making changes to desktop and restart the computer. After reboot, all changes made should be gone.

Registration of reborn software If the reborn software is running in the trial mode, the registration program for reborn card will be shown every time the windows is restarted. If you have got the license, you are ready to fill in some data into the registration program. 1) Insert the reborn software CD, there is a file named ‘RegAdv.exe’. Double

click to run it.

2) Fill in the account number and password and click OK button

3) It will show you the serial number, activation status, how many license you

have left for registration. Click ‘Activate’ button

4) Upon registration completed, restart the machine.

5) After registration, a welcome screen is shown when rebooted. And the boot menu will no longer show the trial version message. The license has been activated.

--End --