read before use - identa corp€¦ · identa white heroin traces kit a cid dilution 6 wsqueeze ith...
TRANSCRIPT
-
As a precaution, gloves and eye protection should be worn when handling drug substances and using test units.Do not puncture any part of unit. Do not remove probe once locked into unit.
In the unlikely event of a spill, rinse affected area thoroughly with water.Keep out of reach of children.
READ BEFORE USE
Procedure Card for IDT 2000T-10 IDenta KitWhite Heroin Traces
Acid
Dilu
tion 6 7Withsqueeze chamber 2 until capsule breaks. , thumb and forefinger Gently shake test unit for 2-3 seconds.
Wait 5 minutes.
Disp
osal The test kit
is now safe to dispose of in the trash.
PC IDT 2000-10 R05112012-8
The test window will warm up. This is normal.
Aci
d D
ilutio
n 8 9Withsqueeze chamber 3 until capsule breaks. , thumb and forefinger Gently shake test unit for 2-3 seconds.The test window will warm up.
DentaIWorld Leader inForensic Products
99% accurate presumptive field screening when used correctly.
Manufactured by IDenta Corp.www.identa-corp.com • +972-2-5872220
• Patented Technology Made in Israel
This is normal.
Trace Material2R e m o v e t h e S m a r t - Ti p ™ probe from test unit.
1
Test
Pre
para
tion
4
Iden
tific
atio
nDo not continue
unless probe is locked below the Flex Pins and cannot be removed from the test unit.
A click sound will indicate the probe is
locked.
Lock Smart-Tip™ probe into test unit. Press firmly.
3
Test
Pre
para
tion With
, squeeze chamber 1 until capsule breaks.
thumb and forefinger 5
G e n t l y shake test unit for 2-3 seconds.
Swipe the paper of the Smart-Tip™ probe across the surface suspected to contain traces or residue.
FlexPins
Sample suspected substance.
Powders
Touch adhesive Smart-Tip™ to sample.
Resu
lts
The appearance of a purple-violet color indicates the presence of Heroin.
Proceed to Acid Dilution (steps 6-9),regardless of whether or not a color appeared.
If no color develops, Heroin is not present.
As a precaution, gloves and eye protection should be worn when handling drug substances and using test units.Do not puncture any part of unit. Do not remove probe once locked into unit.
In the unlikely event of a spill, rinse affected area thoroughly with water.Keep out of reach of children.
READ BEFORE USE
IDenta White HeroinSubstance & Traces
Acid
Dilu
tion 6 7Withsqueeze chamber 2 until capsule breaks. , thumb and forefinger Gently shake test unit for 2-3 seconds.
Wait 5 minutes.
Dis
posa
l
The test kit is now safe to dispose of in the trash.
The test window will warm up. This is normal.
Aci
d D
ilutio
n 8 9Withsqueeze chamber 3 until capsule breaks. , thumb and forefinger Gently shake test unit for 2-3 seconds.The test window will warm up.
DentaIWorld Leader inForensic Products
99% accurate presumptive field screening when used correctly.
Manufactured by IDenta Corp.www.identa-corp.com • +972-2-5872220
• Patented Technology Made in Israel
This is normal.
Trace Material2R e m o v e t h e S m a r t - Ti p ™ probe from test unit.
1
Test
Pre
para
tion
4
Iden
tific
atio
nDo not continue
unless probe is locked below the Flex Pins and cannot be removed from the test unit.
A click sound will indicate the probe is
locked.
Lock Smart-Tip™ probe into test unit. Press firmly.
3
Test
Pre
para
tion With
, squeeze chamber 1 until capsule breaks.
thumb and forefinger 5
G e n t l y shake test unit for 2-3 seconds.
Swipe the paper of the Smart-Tip™ probe across the suspect surface.
FlexPins
Sample suspected substance or surface.
Powder
Touch adhesive Smart-Tip™ to sample.
Resu
lts
The appearance of a purple-violet color in either the front or back window indicates the presence of Heroin.
Proceed to Acid Dilution (steps 6-9),regardless of whether or not a color appeared.
If no color develops, Heroin is not present.
All results are presumptive. For substance testing only: If necessary, further confirmatory testing by a competent drug testing lab may provide additional identification and quantification using gas chromatography/mass spectrometry analysis.
10-13
DRUG TESTING KIT
Procedure Card for IDT 2000T-10