re-flash_procedure moto qcdma
TRANSCRIPT
Moto Q CDMA
Re-Flash Procedure, Indonesia
23-May-07
Software & Tools
• RSD Lite 3.6 or latest
• Software Pack MOBILE8_Q2_C_01.01.01I_01.01.00R_MONSTER_01.sbf
For SMART For BTEL– pri-q2-bp_c_WIN_v1.hs - BTel_miniflex_v1.0.hs– Smart_v1.CAB - Esia_v1.CAB
Upgrade Software
• Open RSD Lite
Connect Phone Flash
1. Press “A” + “Enter” key Power On Phone in Flash mode.
2. Select File “MOBILE8_Q2_C_01.01.01I_01.01.00R_MONSTER_01.sbf”
3. Click “Start”
1
32
Upgrade time ~ 15 minsAfter finish, phone will power on automatically.
Flex Smart PRI
1. Power On Phone Normally.
2. Select File “hs file”
3. Click “Start”
1
32
Flex time ~ 2 minsAfter finish, phone will power on automatically.
Customize Operator Logo
1. Power On Phone Normally.
2. Copy File “CAB file” into Mini-SD and insert to Phone
3. From Phone Menu Click “Start” “File Manager” “Storage Card” Click at “CAB file” to install Yes OK Done
Install Customize time ~ 1 min
UPGRADE FINISH !!
Step to ProgramAKEY, MIN, MDN and SPCwill be done manually by
Customer care
1. Power On phone wait until phone fully display in idle mode
2. Press # # 0 7 3 8 8 7 * <call>
3. Enter Security Code (default after re-flash is “000000”)
B. AKEY to entry new AKEY
C. Extended NAM NAM1 to edit MIN, MDN and change SPC code.