raychem screened separable elbows juice/hv_juice_au… · ucts to truly fit their needs. some of...
TRANSCRIPT
Aug
/Sep
20
15
HV JUICE
This Issue
ww
w.tr
ansn
et.c
o.n
z
RAYCHEMSCREENED
SEPARABLEELBOWS
1250A up to 42kVPAGE 4
Salisbury ARC Flash Protection
NEW PRODUCT! RAYCHEM CABLE CLAMPS
PAGE 2
VSCAN - CABLE LOCATORSPAGE 4
TE MECHANICAL CONNECTORS
PAGE 6
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
NEW!! RAYCHEM CABLE CLAMPS
What makes Raychem the Industry Leader?Raychem cable clamps have a patented design which optimises clamping force at both the attachment point, and the cable by securing each clamp half separately. Cables can be aligned and located in the bottom half of the clamp prior to the final tightening.
Clamps come complete with all fasteners, no chance of coming up short on the job. Available in single and trefoil configurations.
Designed & independently tested to meet all requirements of IEC61914
SI
NG
LE
FEATURES• Range accepts cable diameters from 26-38mm, 38-50mm & 50-60mm• Can be mounted using centre bolt or 2 bolts at extremities• Can be stacked• Available in slider plate and strut nut configurations.• Superior clamping performance• Captive elastomeric inserts for increased cable protection and
containment• Optimised for harsh environments with stainless steel hardware and
self-extinguishing polymer materials• Smooth aesthetics which improve overall strength while in operation• Easy product identification• Perfect for harsh environments, made from UV stable materials and
complete with stainless steel hardware
Slider Plate Version
Strut Nut Version
Integral stainless steel clamping plates to ensure consistent clamping pressure on both sides
Range taking elastomeric inserts, minimise stock holdings, yet maximise performance
Range accepts cable diameters from 26-106mm (more coming soon)
Elastomeric inserts can accommodate round, oval or “tri-round” cable profiles
Bottom half of clamps can be mounted, prior to cable fitment
Can be used without inserts in an emergency, to increase the clamping range
Impact resistant, Halogen free, UV stabilised materials
Patented slider plate design, maximises clamp performance, when under shock load
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
SINGLE AND TREFOIL CONFIGURATIONS
A Solution for All ApplicationsT
RE
FO
IL
STACKING OPTIONS• Stacked dual application• Dual cable application• 3 x 3 configuration• Pyramid Installation• 3 phase pad mount kit TAP10910 - 26-38mm Ø• Double stacked trefoil application
Stacking is possible for Single and Trefoil cable clamps, they can be installed horizontally or vertically depending on the lay up of the cable vault. The option of strut nut or slider plate in the base makes it very easy to install these clamps.The clamps are versatile and can be stacked in many different configurations, they have been independently tested to meet all requirements of IEC 61914. Furthermore, TE Connectivity’s in house design team is on hand to produce tailor made schematics and specify technical details for custom cable clamp layouts that suit your specific needs. Please contact us for more details.
Easy product identification. Smooth aesthetics which improve overall strength while in operation
Optimised for harsh environments with stainless steel hardware
Self-extinguishing, UV stabilised, polymer materials
Range accepts cable diameters from 26-38mm, 38-50mm & 50-60mm
Captive elastomeric inserts for increased cable protection and containment
Can be used as a dual cable clamp or stacked
Can be mounted using centre bolt or 2 bolts at extremities
Available in slider plate and strut nut configurations
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
RAY CHEM ELB OWS
With switchgear interfaces trending towards a “C” style bushing TE has ensured they follow the trend with Screened Separable Elbows for 630A and 1250A rated bushings.
The Raychem RSTI-Large range is specially designed for large cross sections 1250A up to 42kV.
BENEFITS OF RSTI ELBOW RANGE• Connector insulation is made of highly modified
silicone rubber characterised by high tracking resis-tance, elongation at break and non-flammability.
• Insulation has permanently bonded thin walled screen to protect against accidental contact.
• No need to remove screened connector for over sheath testing
• Exceeds CENELEC HD 629.1 S2• Design fits 630A and 1250A bushings (interface C
1
and C2) as specified by EN 50180 and EN 50181
• Compact design supports the use of double “T” con-nections inside standard terminal boxes
• Wide application range 25mm² to 800mm²• Mechanical lugs make off connection• Easily accessible rear plug with capacitive test point• Sold as complete kit
RAYC
HEM
ELBO
WS
3. Mechanical Lug
9. Conductive End Cap
8. Test Point
7. Rear Plug with Test Point
6. Threaded Pin
5. Earthing Eye and Ground Lead
4. Stress Cone Adaptor
2. Inner Screen
1. Screened Body
FEATURES
RAYCHEM SCREENED SEPARABLE ELBOWS
MAKING THE CONNECTION THAT COUNTS
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
SALISBURY ARC FLASH PROTECTION
Salisbury by Honeywell has blended arc flash protection with comfort to create a new, lighter 40 cal/cm2 arc flash protective suit. The Premium Light Weight line leads the way towards a new standard in arc flash protective clothing that improves worker comfort without compromising safety.INTRODUCING THE LIGHTEST HRC 4 SUIT AVAILABLE.
There is no other product on the market that provides the same level of safety, comfort and quality as one will find with Salisbury’s Premium Light Weight Suit.
The PLT is uniquely designed to provide workers with increased com-fort without compromising their safety. Offering the same protection as a standard 40 cal/cm2 Arc Flash suit, the Premium Light Weight is a preferred choice among electrical workers due to its lighter fabric weight. At 11 oz/yd2, this material is the lightest available and meets all the necessary standards to keep you safe from arc flash.
Comfort• Total fabric weight of 11 oz/yd2 compared to
18.5 oz/yd2 makes this suit the lightest in the industry
• Lighter fabric allows for added ease of movement• Keeps user cooler longer than a standard HRC 4
suit• Adjustable gussets on overall cuffs allow for a more
comfortable fit
Safety• Longer coat creates better body coverage• Complies with NFPA 70E HRC4• Meets ASTM F1506-02A• Meets ASTM F1959M/F1959M-99• Arc Rated for the life of the garment• Heat Attenuation Factor of 93.20%, meaning gar-
ment is not only flame resistant, but resists 93.2% of the heat experienced in an arc flash
FEATURES OF THE PLT 40CAL/CM2 RANGE OF ARC PROTECTION CLOTHING
AGENCY LISTINGS:
WORLD LEADERS IN ELECTRICAL SAFETY PPE– NEW Premium Light Weight PRO-WEAR®
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
CABLE LOCATORS
FEATURES AND OPTIONS • Compass (line direction indicator) • Self-test and calibration verification • Data logging and data management software • Configuration utility - personalize your vScan • Metal cover locating mode • Lithium ion rechargeable batteries • Internal or external GPS • Bluetooth
MAKING LOCATING EASIER...... • Power and Radio modes - for passive locating • 33kHz & 131kHz for active locating using optional transmitter • Sonde mode (33kHz) • M mode for locating metal covers (vScanM only) • Rotary control for sensitivity • Paddle control for mode and navigation • Two pushbuttons - on/off and depth/menu/select • High contrast display with backlight • Compass - arrows indicate line direction • Depth and current measurement (configurable) • Both internal & removable loudspeakers • Internal or external GPS (optional)
A NEW STANDARD FOR SAFETY...... • Self-test/calibration verification - confirms functionality • User settings for warnings/alerts
> Visual > Audio warning > Warnings/alerts > Vibrate warning > Shutdown
+ Includes metal detection capability+ Rugged and Safe+ Compact and Easy to Use
KITS AVAILABLE INCLUDE:
• TNVSCANSKIT Standard Pipe & Cable Locator Kit
• TNVSCANMKIT Pipe & Cable Locator Kit with Metal Detector
• TNV550-G001-I Basic Energised Cable Locator Kit
• TNVLP2-C011-I5 Top of the range Complete Locator Kit
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
UTILUX MECHANICAL CONNECTORS
FEATURES OF MECHANICAL CONNECTORS
Wide application range• Three sizes cover 25 mm² to 400 mm² and can be used for
almost every type of conductor and materialBodies = high-tensile, tin-plated aluminium alloy Bolts = special aluminium alloy
• Good contact properties• Connection between copper and aluminium conductors is possible
Compact design • All sizes require very little installation space
Grooves in Connector Barrel• Good electrical performance• Conductor oxide film is disrupted
Centered hole and inserts
• Conductors of every size are centered• Height of the step between the conductor insulation and connec-
tor surface is reduced• Same cut-back length even with centering insert used• Wires are not distorted when bolts are tightened
Shear bolts with predetermined shear torque, hexagon head and specially shaped contact ring
• No torque wrench necessary• Head shears off when specific level of torque is applied• High tensile strength
Lubricated bolts• Reduces friction• Converts tightening torque into contact force
No elongation during installation • Easier to design relevant accessories
SPECIAL FEATURES OF MECHANICAL CONNECTORSChamfered edges • Suitable up to 42 kV & adaptable to existing joint designsWith or without oil barrier • Oil stop when used in transition joints
SPECIAL FEATURES OF MECHANICAL LUGSLong shank • Extra-long for moisture barrierLengthwise seal • For indoor and outdoor applications
TE CONNECTIVITY – THE GLOBAL LEADERS IN MECHANICAL CONNECTOR TECHNOLOGY
TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.
TransNet New Zealand Ltd
Auckland20 Neilpark DriveEast TamakiAucklandNEW ZEALAND Ph 0800 442 182 Fax 0800 442 183PO Box 39 383 Howick, Auckland
Wellington18 Sydney StreetPetoneWellingtonNEW ZEALAND Ph 04 576 2530Fax 04 576 0040PO Box 39 383 Howick, Auckland
NEW ZEALAND
TransNet Equipment Pty Ltd
PerthUnit 20, 8 Hurley StreetCanning Vale WA 6155PerthAUSTRALIA Ph +61 8 9256 3417Fax +61 8 9256 3917PO Box 1439Canning Vale DC WA 6970
AUSTRALIA
TransNet Tonga
Ma’ufangaSmall IndustriesMa’ufangaTONGA Ph +67 627 939Fax +67 627 976 PO Box 2932Nukualofa
TONGA
EEA – Conference & Trade ExhibitionHeld in Wellington, June 24-26
Delivering Leadership: + Technology+ Safety + Quality
The annual EEA Conference and Trade Exhibition was held in Wellington late last month. Every year this event attracts manufacturers, suppliers, asset owners and contrac-tors from around the country and the world. It’s a valuable time to catch up with people you haven’t seen since the last event and a great op-portunity for us as suppliers to display some of the latest innovations we are bringing to market.
With the show being held in Wellington this year it brought a new dimension to planning and executing the design of our stand.
We decided to base the
stand display around the theme of the event - Delivering Leadership! TE and TransNet work together to get the latest innovations from develop-ment to market. We pride ourselves on being the lead-ers in the industry, delivering innovative new products, working with our customers to fully understand their needs and designing prod-ucts to truly fit their needs.
Some of these cus-tomer led inno-vations were on display at our stand this year. We have the international TE
R&D facilities at our finger tips and with 3D printing we can now supply prototype samples faster than ever before. The fully functioning 3D printed motorcycle above was designed and built by TE to demonstrate how this technology can assist in new product development.