rav 4 - parts db

Do not slam bonnet.

Installation Time: Approx. 15 mins

Place these instructions in vehicle’s glove box after installation is complete

Accessory Part No. PZQ15-42110 (Clear)/PZQ15-42120 (Tinted)

January 2019 Production Onwards ACRYLIC BONNET PROTECTOR

Installation Instructions

Clean Bonnet Protectorwith a mild detergent and water solution.

Do not use abrasive,spirit or solvent based cleaners.

Care Instructions:

Do not use automaticcar wash.

PARTS, SERVICE & ACCESSORIES

RAV 4

ISSUE 1: 05/10/2018 Accessory Part No. PZQ15-42110 (Clear)/PZQ15-42120 (Tinted) of 5

B2602

1

PZQ15-4211A (Clear)or

PZQ15-4212A(Tinted)

2

Qty Part numberItem Component Name

2Push-on Metal Fixed Clip

2Push-on Metal Clip Inner

2Push-on Metal Clip Outer

2Fibre Washer

2Neoprene Washer

2Self Tapping Screw

Small Screw 2

6Anti-Abrasive Tape - Small

4Anti-Abrasive Tape - Large

1Alcohol Wipe

1Fitting Instruction Flyer

2Screw Plug

1PZQ15-42110

orPZQ15-42120

1Bonnet Protector (Clear)

orBonnet Protector (Tinted)

RAV 4 ACRYLIC BONNET PROTECTOR B2602


FITTING KIT


PZQ15-42110 (clear)/PZQ15-42120 (tinted)

BONNET PROTECTOR

IMAGE IS FOR REFERENCE ONLY

Live a Genuine Life

www.toyotamanuals.com.au/accessories

T201

5-00

0689

PS

A00

680

TOY

001

Congratulations on purchasing your Toyota Genuine Accessory.

Correct installation of your Accessory is critical to ensuring its performance and safeoperation. Before commencing installation, please consider if you have the appropriatetechnical skills to successfully install this product.

Fitting instructions are available on the Toyota Service Information & Repair Manualswebsite at www.toyotamanuals.com.au/accessories.

To view or download fitting instructions, enter the Accessory part number without the dash.The part number is found on the barcode label located on the outside of the Accessorypackaging as shown below.

Please follow the fitting instructions closely using the tools specified. If cutting or drillingtemplates are required, set the page scale to “none” in the print menu prior to printing.Always confirm the template size by measuring the scale indicator before cutting or drilling.

To the extent permitted by law, Toyota Australia excludes all liability which may arise becausea user of this publication fails to follow directions in the publication.

If you have any queries regarding the installation of your Toyota Genuine Accessory, please

Qty Description DescriptionItem QtyItem

J 6 Anti-Abrasive Tape - Small1 Alcohol WipeK

4 Anti-Abrasive Tape - LargeI2 Neoprene WasherH

G 2 Fibre Washer2B Push-on Metal Clip Inner2C Push-on Metal Clip Outer

2A Push-on Metal Fixed Clip

D 2 Screw PlugE 2 Self Tapping Screw

2F Small Screw 1L Fitting Instruction Flyer

RAV 4 ACRYLIC BONNET PROTECTORRAV 4 ACRYLIC BONNET PROTECTORAccessory Part No. PZQ15-42110 (Clear)/

PZQ15-42120 (Tinted)

PZQ15-4211A (Clear)/PZQ15-4212A(Tinted)

F G I

S U R F A C E C L E A N E R

Read installation instructionsbefore use.

For use in cleaning painted metal,glass and other vehicle surfaces.

IMPREGNATED WITH 70% ISOPROPYL ALCOHOL

!DANGER

A U T O M O T I V E

J K

D ECA B

H L

EXPLODED VIEW B

EXPLODED VIEW B

EXPLODED VIEW C

EXPLODED VIEW C

EXPLODED VIEW A

EXPLODED VIEW A

B2602


2. Clean the topside and underside of the bonnet at the previously noted areas with the alcohol wipe provided. Wipe off any residue with a dry clean cloth.See Dia #2.


Diagram #: 2

1. Read installation instructions thoroughly before commencing installation.

Open and thoroughly clean and dry the bonnet.

Trial fit the bonnet protector centrally onto the bonnet.

Note and mark the location of the four tags on the Bonnet Protector and where they correspond to the top of the bonnet.

Note and mark where the two central slots in the tags are aligned with the holes in the underside of the bonnet.

Note and mark where the two slots in the outer tags correspond with the bonnet lip.

Note and mark where the outer holes on the Bonnet Protector correspond with the bonnet lip. Remove Bonnet Protector. See Dia #1.

Diagram #: 1

3. Adhere the small anti-abrasive tapes at the previously marked positions on the bonnet. Apply the tape so approximately half of the tape is on the topside and half is on the underside of the bonnet. See Dia #3

Diagram #: 3

RAV 4 ACRYLIC BONNET PROTECTORAccessory Part No. PZQ15-42110 (Clear)/


Slot Slot

Hole

Slot

Hole

Slot

S U R F A C E C L E A N E R

Read installation instructionsbefore use.

For use in cleaning painted metal,glass and other vehicle surfaces.

IMPREGNATED WITH 70% ISOPROPYL ALCOHOL

!DANGER

A U T O M O T I V E

B2602



Diagram #: 7

4. Sit the Bonnet Protector back from the front lip of the bonnet.Adhere the four large abrasive resistant tapes flush with the front edge of the bonnet at the four tag locations.See Dia #4.

Diagram #: 4

Diagram #: 5

Diagram #: 6

6. Push the two push-on metal clips inner onto the acrylic tags of the Bonnet Protector. A definite click should be heard when the acrylic tag engages with the metal clip.See Dia #6

7. Install the Bonnet Protector. Ensure that it is central on the bonnet.

5. Push the two push-on metal fixed clips onto the acrylic tags of the Bonnet Protector. A definite click should be heard when the acrylic tag engages with the metal clip.See Dia #5

IMPORTANT: Ensure that the clips are positioned over anti-abrasive tape and donot come into contact with any of the bonnet’s paint work. Failure to do so may result in permanent paint damage.

Slide the push-on metal fixed clips onto the bonnet lip over the previously adhered abrasive resistant tapes. Ensure rectangular holes on the fixed clips are centrally aligned with round holes in bonnet.Slide the push-on metal clip inner onto the bonnet lip over the previously adhered abrasive resistant tapes. See Dia #7.



8. Insert the screw plugs through the rectangular holes of the fixed clips into the bonnet.While pushing the screw plug down against the clip insert the two self-tapping screws into the screw plugs, but do not fully tighten.

Ensure the screw plug does not rotate out of position while inserting the screw and that the Bonnet Protector is centrally located on the bonnet.Fully tighten the two screws.See Dia #8.

B2602



Diagram #: 8



Note: Ensure torque setting 1.5~2.0Nm is used.

9. Slide the two push-on metal outer clips onto the bonnet locating them over the anti-abrasive tape strips as shown. See Dia #9.

IMPORTANT: Ensure that the clips are positioned over anti-abrasive tape and do not come into contact with any of the bonnet’s paint work. Failure to do so may result in permanent paint damage.

10. Loosely secure the Bonnet Protector to the two outer push-on metal clips with the screws, fibre washers and neoprene washers. The neoprene washer goes in between the Bonnet Protector and the Metal clip.

Check the Bonnet Protector is sitting centrally on the bonnet.

Tighten all the screws. See Fig #10.

TO REMOVE: Reverse the above procedures.

Diagram #: 9

CL

CL

IMPORTANT: Conduct final inspection, ensuring all fasteners are tightened, and clips are correctly installed and not touching painted surfaces. Close bonnet and check clearances at all edges for interference and adjust if necessary.

Note: Ensure torque setting 2.0~2.3Nm is used.

Diagram #: 10

Torque: 1.5~2.0 Nm

Torque: 2.0~2.3 NM

PUSH DOWN

rav 4 - parts db

Documents