rasta peth division - :: mahadiscom - maharashtra...
TRANSCRIPT
1
RRAASSTTAA PPEETTHH DDIIVVIISSIIOONN
PUNE - 411011
TTEENNDDEERR DDOOCCUUMMEENNTTSS
2
MMAAHHAARRAASSHHTTRRAA SSTTAATTEE EELLEECCTTRRIICCIITTYY DDIISSTT CCOO LLTTDD
RRaassttaa PPeetthh DDiivviissiioonn,, BBlloocckk No: 103, Rasta Peth Administrative Building; Pune 411011.. PPhh:: -- 2266113300555599
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- RReeff NNoo EEEE//RRPPDD//TTeennddeerr// //0088--0099// DDaattee:: --
To
TThhee EEddiittoorr,,
DDaaiillyy SSaakkaall//SSaaddhhaayynnaanndd//PPrraabbhhaatt//PPuuddhhaarrii
PPuunnee..
SSuubb:: -- PPuubblliiccaattiioonn ooff TTeennddeerr NNoottiiccee
SSiirr,,
PPlleeaassee iinnsseerrtt tthhee eenncclloosseedd TTeennddeerr NNoottiiccee iinn tthhee nneexxtt iimmmmeeddiiaattee iissssuuee iinn yyoouurr eesstteeeemmeedd NNeewwssppaappeerr iinn
yyoouurr llaanngguuaaggee bbuutt nnoott llaatteerr tthhaann 2200..1111..22000088.. TThhee aaddvveerrttiisseemmeenntt sshhoouulldd bbee ppuubblliisshheedd aass ppeerr iinnssttrruuccttiioonnss.. TThhee
nnoottiiffiiccaattiioonn mmaayy pplleeaassee bbee aaccccoommmmooddaatteedd iinn mmiinniimmuumm ssppaaccee wwiitthh ccoommppaannyy,, eemmbblleemm aatt lleefftt hhaanndd ccoorrnneerr ooff
nnoottiiffiiccaattiioonn.. TThhee vvaaccaanntt ssppaaccee oonn rriigghhtt hhaanndd ssiiddee ooff eemmbblleemm aatt ttoopp sshhoouulldd bbee uuttiilliizzeedd ttoo ddiissppllaayy hheeaaddiinngg..
YYoouu mmaayy ssuubbmmiitt yyoouurr bbiillll iinn ttrriipplliiccaattee ttoo uunnddeerrssiiggnneedd aalloonngg wwiitthh tthhrreeee ccooppiieess ooff pprreessss ccuuttttiinngg && cceerrttiiffiiccaattee
ttoo tthhee eeffffeecctt tthhaatt rraatteess cchhaarrggeedd tthheerree iinn aarree nnoott hhiigghheerr tthheenn tthhoossee cchhaarrggeedd ttoo aannyy GGoovvtt.. //sseemmii GGoovvtt..
oorrggaanniizzaattiioonn..
TThhaannkkiinngg YYoouu,,
YYoouurrss FFaaiitthhffuullllyy,,
EExxeeccuuttiivvee EEnnggiinneeeerr
RRaassttaa PPeetthh DDiivviissiioonn
CCooppyy SS.. WW.. RRSS.. TToo:: --
11)) TThhee CChhiieeff EEnnggiinneeeerr ((PPuunnee ZZoonnee)) PPuunnee,,
22)) TThhee SSuuppeerriinntteennddiinngg EEnnggiinneeeerr ((RRPPUUCC)) PPuunnee,,
33)) TThhee DDeepptt.. CChhiieeff PPuubblliicc RReellaattiioonn ooffffiicceerr,, PPZZ,, PPuunnee
CCooppyy TToo:: --
11)) DDyy EE..EE.. RRaassttaa PPeetthh // SSaaiinntt MMaarryy // KKaassbbaa SSuubb//DDnn..
22)) JJuunniioorr MMaannaaggeerr ((FF &&AA)) RRaassttaa PPeetthh DDiivviissiioonn
3) NNoottiiccee BBooaarrdd
3
TENDER NOTICE
Super scribed and sealed tenders are invited from registered and reputed
firms/companies/corporations/suppliers /Government contractors for implementation of following work.
Sr. No.
Tender No.
Description Estimated Cost in Rs.
E.M.D. to be paid in Rs.
EE/RPD/
TENDER-
Providing & fixing of cable jointing kits suitable for
11 KV & 22 KV XLPE / PILCA cable, and LT jointing
kits under in Rasta Peth division for following
Sub/Dn.
01 1/08-09 Rasta Peth Sub/Dn. Rs.10 Lakhs Rs. 10,000/-
02 2/08-09 Saint Mary Sub/Dn. Rs.10 Lakhs Rs. 10,000/-
03 3/08-09 Kasba Peth Sub/Dn. Rs.5 Lakhs Rs. 5,000/-
TERMS AND CONDITIONS: -
1) The area of operation for works to be executed is in Rasta Peth Division Area
2) The price of Tender document is Rs 250/- for each tender + 4% VAT extra.
3) EMD is 1% of estimated value should be paid either in cash or by D.D. drawn on any of the Nationalized
/Scheduled Bank in favour of Executive Engineer, M. S. E. D. C. L., Rasta Peth Division, Pune. Tender without
EMD will be rejected.
4) Tender documents can be purchased from the office of the Executive Engineer, M. S. E. D. Co. Ltd, Rasta Peth
Division, Block No: 103, Rasta Peth Administrative Building ;Pune 411011.
5) The sale period of Tender document is from 20.11.08.to 27.11.08. From 11:00 Hrs. to 13:00 Hrs on working
days.
6) The last date of submission of Tender is DT. 28.11.08. up to 14:00hrs
7) The tenders will be opened on date 28.11.08. at 15:00 hrs
8) For knowing eligibility and qualifying criteria etc. the Bidders may contact at the above address.
9) Tenders received late after due date & time due to any reason including postal delay will not be accepted.
10) Maharashtra State Electricity Distribution Company Ltd reserves right to reject any or all the bids without
assigning any reason thereof.
Executive Engineer
Rasta Peth Division
M. S. E. D. C. L.
Emblem
4
Tender No. EE/RPD/T- /08-09
MMAAHHAARRAASSHHTTRRAA SSTTAATTEE EELLEECCTTRRIICCIITTYY DDIISSTT CCOO LLTTDD
RRaassttaa PPeetthh DDiivviissiioonn,, BBlloocckk No: 103, Rasta Peth Administrative Building; Pune 411011
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tender for providing & fixing of cable jointing kits suitable for 11 KV & 22 KV XLPE / PILCA cable,
and LT jointing kits under Rasta Peth Sub/Dn. in Rasta Peth division.
Tender No. EE/PRD/T- 1/08-09
Tender for Work of providing & fixing of cable jointing kits suitable for 11 KV & 22 KV XLPE /
PILCA cable, and LT jointing kits.
_________________________________________________________________________________________________
Tender Cost: Rs. 250/- + 4% VAT extra
Estimated Cost: Rs. 10.00 Lakhs
E.M.D.: - Rs. 10,000/- _________________________________________________________________________________________________
TO BE FILLED IN ACCOUNTS SECTION Tender Copy No. _ Issued to _______________________________________________________________________ Tender cost of Rs. _________ paid vide M.R. No ____________ DT._________ Junior Manager (F& A) Executive Engineer Rasta Peth Division Rasta Peth Division _________________________________________________________________________________________________
TO BE FILLED IN BY THE TENDERER 1. Name & address of the ____________________________________________________________________ 2. Address of the factory/ ____________________________________________________________________ Unit ____________________________________________________________________ 3. E.M.D. paid Rs.____________ M.R. No. _________ DT.__________ _________________________________________________________________________________________________ IMPORTANT NOTES: 1] Tenderer must submit all the tender documents duly filled in & signed by them before the due date and
time.
2] Rates should be quoted in the prescribed schedule attached with this tender and not in any other form.
-------------------------------------------------------------------------------------------------------------------------------------------------- FOR OFFICE USE: Total Nos. of tenders received __________ & Opened on _________________ IN THE PRESENCE OF: J M (F &A) J. E. Dy. E. E.(O) Executive Engineer Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn
5
MAHARASHTRA STATE ELECTRICITY DIST. CO. LTD. RRaassttaa PPeetthh DDiivviissiioonn,, BBlloocckk No: 103, Rasta Peth Administrative Building; Pune-
411011 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To, --------------------------------------------
--------------------------------------------
--------------------------------------------
--------------------------------------------
Dear Tenderer,
Please quote the lowest rates for providing and fixing of jointing Kits specified & name of the
manufacturer in the Schedule - “A”, “B” and “C” attached herewith. All the tender documents including
cover page should be submitted duly filled-in and signed by the tenderer. Rates should be quoted in the
attached ‘Schedule - “A”, “B” and “C” only. Tenders in any other form will not be accepted. If you desire any
additional information to be submitted, you may attach separate sheets to the tender documents.
INNER OF TENDER DOCUMENTS
Sr. No Particulars Page No.
01 Tender Notice 03
02 Instructions to Tenderer 06-10
03 Particulars of the Tenderer 11
04 Schedule of Tenderer’s experience 12
05 General Technical requirement 13-14
06 Schedules –‘A’, ‘B’ and ‘C’ 15 -17
07 General Conditions of Contract 18-19
08 Conditions of the works 20-22
09 Sample form for contract Agreement 23
10 Sample form for Performance Security (Bank Guarantee) 24
11 Letter to the Executive Engineer 25
Executive Engineer Rasta Peth Division
6
INSTRUCTIONS TO TENDERER
1.01 Sealed and super scribed items rate tenders are invited from reputed experienced licensed Electrical
Contractors having experience in M. S. E. D. C. Ltd., State Electricity Board/Company, P.W.D., etc
1.02 The scope of work covered under the tender shall comprise of PROVIDING & FIXING OF CABLE
JOINTING KITS SUITABLE FOR 11 KV & 22 K.V. X.L.P.E./PILC CABLE at Rasta Peth Division as
per the instructions of concerned Executive Engineer / S.D.O.’s after receipt of order from the Office
and completing of all formalities.
1.03 The earnest money to be deposited with tender. Tenders submitted without earnest money shall be
summarily rejected.
1.04 Payment of earnest money as indicated in clause 1.03 shall be accepted in the form of cash / demand
draft in favour of Executive Engineer, Rasta Peth Division, Pune payable at any Scheduled Bank,
Pune. The Earnest Money Deposit will be forfeited in case successful tenderer fails to pay security
deposit and execute the contract agreement within the prescribed period. Payment of Earnest Money
by “Cheque” shall be not been accepted.
1.05 The tenders must be filled in prescribed forms only for one manufacturer. Separate tenders should be
filled for separate manufactures. The blank tender form will be available at the cost of
Rs. 250/- + VAT in cash at RRaassttaa PPeetthh DDiivviissiioonn,, Block No: 103, Rasta Peth Administrative Building
;Pune- 411011as per tender notice.
1.06 Tenderer must return the tender form together with the specifications and the rates with NAME OF THE
MANUFACTURER duly filled in Schedule - “A”, “B” and “C” duly signed. Any tender not bearing the signature of
tenderer on all the documents accompanying the tender is liable to be rejected.
1.07 The Offer is to be submitted in two envelopes super scribed as 'Envelope I' and 'Envelope II ' in
Tender Box in due time.
7
Envelope I:
Envelope containing the qualifying documents / certificates should properly sealed and super
scribed as below:
a) Envelope I
Tender for providing & fixing of cable jointing kits suitable for 11 KV & 22 KV XLPE / PILCA cable,
and LT jointing kits.
Tender no
The due date & time
EMD paid / exempted
Firms name & address.
The envelope should contain following qualifying document. DD/ Photo copy of money receipt paid against
EMD.
1. Copy of receipt regarding payment of EMD. If EMD is exempted valid registration Under SSI in
Maharashtra
2. Sales Tax registration / VAT Registration if applicable.
3. Name of the Manufacturer & Technical specification of the joining kits will be as per I.S.I.- 1 3 5 7 3 –
1992 amended from time to time from manufacturer for cable jointing kits suitable for 11 KV & 22 KV
XLPE / PILCA cable, and LT jointing kits offered and deviation from the prescribed specification.
Test reports, literate, drawings etc. also be submitted.
4. Experience certificate regarding satisfactory completion of work for providing & fixing of cable
jointing kits suitable for 11 KV & 22 KV XLPE / PILCA cable, and LT jointing kits cable in at least one
Indian Electricity Distribution Companies/SEB’s in any one year.
5. Details of Sample Kits Submitted. [If applicable]
6. Also submit the attested documents as detailed below.
a) Valid Electrical contractor licenses.
b) Valid Income Tax Clearance Certificate/ PAN No/Last 3 years Income Tax paid Certificate.
c) Solvency certificate of 50% of value of tender issued by National Bank valid for the current
year 2008-09.
b) Envelope II:
The envelope II should contain the tender document with price (rate) offered in Schedule -”A”, “B”
and “C” duly signed with seal.
1.08 The tenderer will have to submit SOLVENCY CERTIFICATE from any Nationalized Bank to the
extent of 50% of value of the tender.
8
1.09 The tenderer shall be deemed to have studied the specifications and drawings and all other documents
attached to the tender papers, on his having filled in tender.
1.10 The tender duly completed sealed and super scribed with the subject of tender and due date of opening
on the face of cover will be received up to 14.00 Hrs. on the due date and opened on the same day, if
possible in the said Office in the presence of tenderer or the representatives who may choose to remain
present.
1.11 It shall be definitely understood that the MSEDCL does not accept any responsibility for the correctness
or completeness of the Schedule “A”, “B” and “C” for given part and this schedule is liable to
alterations by commissions, deductions or addition in the item or quantities at the discretion of the
Executive Engineer or his authorized representative and contractor would be bound to execute all the
quantities actually ordered / encountered during execution at the corresponding tender prices.
1.12 The rates in the Schedule -”A”, “B” and “C” shall be quoted in figures. All the entries by the tenderer
should be in ink. Erasing and over writings are not permissible. The tenderer should initiate all
corrections and insertions.
1.13 The contractor on award of the contract will have to pay a SECURITY DEPOSIT for work contract at
the rate of 5% of the value of contract by cash or Bank Guarantee for the same value in the prescribed
MSEDCL’s format.
1.14 The undersigned reserves the right to accept or reject any part or all tenders without assigning any
reasons. Further the undersigned reserve the right to bifurcate the tender order and work to more than
one contractor
1.15 The Sale Tax VAT on material or on transfer of property in goods involved in the execution of work
contract or any other tax on raw material or on furnished any fabricated material of works shall not be
separately paid. The rates for the several items of work indicated in attached schedule are deemed to
include all local and general taxes excise duty etc. royalties and any other incidental charges payable by
the contractors at any instant of works. Tenderer should attach a certified photocopy of sales tax
registration under works contract. The work contract tax as specified by the Government will be
deducted directly from contractor’s bills at appropriate rates
1.16 The rates quoted shall remain open/valid for 12 months.
1.17 Tenders which do not fulfill any or all the conditions or are found incomplete in any respect are liable
for rejection.
9
1.18 All taxes and dues (present or future) payable to government and or local authorities in respect of these
works shall be the responsibility of Agency except road reinstatement charges and the Agency will
have to indemnify MSEDCL against liabilities on account of such levies or taxes Income tax, Works
Contract Tax / Service Tax at appropriate rate will be deducted from the contractors bill at the
prevailing rates and applicable surcharges thereon of the gross value of the bill as per instructions laid
down in Government of India Notification unless the necessary exemption certificate from the income
tax department authorized for the purpose in produced will in time.
1.19 The tenderer on placement of the work order enumerating the contract conditions shall within the
prescribed period have to execute a written agreement on the prescribe standard form as per
MSEDCL’s Rules. The regular stamp fees etc. necessary for completing the agreement shall have to be
borne by the Tenderer.
1.20 This instruction to tenders shall also form part of the contract.
10
IMPORTANT
1. Initially while opening the tenders, the envelope No. 1 i.e. Qualifying Bid will be opened first. The price
bids of only those bidders who are qualified in the Qualifying Bid will be opened later. For qualification,
all the documents duly attested as mentioned in Clause 1.07 above are required. The price bids of bidders
who have submitted all the valid documents as per clause 1.07 above shall only be qualified for opening of
price bids.
2. In envelope No. 2 i.e. Price Bid tender document with price offered in Schedule - “A”, “B” and “C” duly
signed with seal.
Signature of the Tenderer EXECUTIVE ENGINEER
Along with Seal Rasta Peth Division
11
PARTICULARS OF THE TENDERER
The tenderer is required to give complete details of the firm represented by him as a contractor
tendering for this work. They should furnish actual and complete details about them in MSED Co. or another
Department. This will be considered for finalizing the tender. Hence requested to submit attested Xerox
copies of satisfactory work completion certificate in envelop No. 1.
“PROFORMA”
01) Name and registered address of the Contractor.
02) Particulars of registration and class in which registered if any
a. In B & C Department :
b. In Railways :
c. In other Dept. if any :
03) Reference regarding the contractor’s past work and performance may be made to (at least 2
references)
04)
a. Previous experience for construction works of similar nature (works carried out in the last 3
years may be mentioned)
b. Dept./Owner of Name of work Value of work Time limit by which work executed
5) Work in hand / under execution:
Under which department
Name of work and location
value Time limit for
completion
Present position of work
6) Any other information the contractor would like to furnish in favour of consideration of tender.
12
SCHEDULE OF TENDERER’S EXPERIENCE Tenderer shall furnish here a list of similar orders executed/under execution by him to whom a
reference may be made by purchaser in case he considers such a reference if necessary.
Sr. No.
Name & Description of the material
Value of providing & fixing
Date of completion of providing & fixing
Name of the Offices/ Division whether work is carried out
1 2 3 4 5
Name of the Firm: Name & Signature of the tenderer Designation Date
13
GENERAL TECHNICAL REQUIREMENT:
1.1 As cable termination kit shall be suitable for termination of the cable on indoor switchgear or outdoor
installation as per requirement. The type of cable will be XLPE insulated. The cable termination jointing kits
shall be as per defined in I.S.I.-13573.
1.2 Proper stress control, stress grading and non-tracking arrangement in the termination and joint shall be
offered by means of proven methods, details of which shall be elaborated in the offer. Detailed sectional
views of the assemblies shall be submitted along with the offer. In case of heat shrinkable cable accessories,
stress control tubing, shall have volume resistively of minimum 1,00,00,000 Ohms- meter for both termination
and straight through joints. Also relative permittivity shall be minimum 15. Tenderer shall furnish
documentary evidence conforming adherence to these along with the offer. Further, impedance of stress
control tubing shall not change over a range of temperature from O degree C to 125 Degree C. The impedance
also remains constant in spite of the difference in stress, which will exist within the sleeve due to hearting
effect within the conductors and the temperature of the environment. Tenderer must submit graph-showing
effect on the impedance value of stress control humbling due to temperature variations and thermal ageing,
with his offer. In case of tapex cast resin type straight through joints, encapsulation of joints is done by
specially developed resin system, which is compatible with the material used for bonding. The jointing kit
shall be with aluminum crimping type ferrules, semi-conductor self bonding tape, the self amalgamating tape
[or EPR or equivalent] stress grading pad etc. The straight through joints should be absolutely impervious to
the entry or water. The manufacturer shall use the proven technologies and design to ensure a construction,
which will prevent entry of water or any other liquid inside the straight through joint and cable. Proven
technologies such as resin injection, hydrophobic sealants etc. shall be deployed in the critical areas. In all
type of kits offered, the external leakage insulation between high voltage conductor and ground as specified
in I.E.E.E. –48 / 1975 amended up to time to time shall be of non-tracking erosion resistant and weather
resistant flexible sleeve.
1.3 For 3-core cable, the gripping tubing [termination boot] for the cable where the trifurcation takes place shall
be considered as a part of the kit.
1.4 The kit offered shall provide for total environmental sealing of the cable crutch and at the lug end.
1.5 Termination and jointing system shall be suitable for use with standard aluminum conductor fittings [cable
lugs and ferrules] of compressed crimping type.
1.6 The termination of straight through jointing kit of heat shrinkable type kit, the joint shall include heat
shrinkable duel wall tubing, which shall be insulating from inside and semi conductor from outside.
Tenderer shall specifically give compliance to this along with the offer.
1.7 For straight through joint the kit shall also include tubular Sleeve in line connectors for solder less crimping of
cable connector. The connector shall be of aluminum alloy A 6 drop forged type or other equivalent or better
material.
14
1.8 Material used for construction of a joint/termination shall perfectly match with the dielectric, chemical and
physical characteristics of the associated cable. The material and design concepts shall incorporate a high
degree of operating compatibility between the cable and the joints.
1.9 The kit offered shall be suitable for the following sizes of cables.
1.10 22 KV and 11 KV, 3 Core CABLE –
X L P E/PILC 3.5 Core L.T.CABLE
1. 70 sq. mm. 35 sq. mm.
2. 95 sq. mm. 50 sq. mm.
3. 120 sq. mm. 70 sq. mm.
4. 185 sq. mm. 95 sq. mm.
5. 240 sq. mm. 120 sq. mm.
6. 300 sq. mm. 185 sq. mm.
7. 400 sq. mm. 240 sq. mm.
300 sq. mm.
1.11 The tenderer shall quote unit rates for insulating tape, lugs, nuts and bolts of various sizes and special tools
required for erection and commissioning, if any, in the offer. These prices shall be kept valid for at least of
one year after placement of order/s. These rates shall not be considered for evaluation of the offer.
1.12 The tenderer shall indicate the required net dimensions of the indoor cable, joints for various cable sizes, in
the form of Length X Breadth X Depth in m.m.
1.13 The tenderer shall specifically bring out the precautions to be observed in execution of the jointing /
termination work to avoid any loss or damage to the cable, the kit, the personnel or the installation. An
instruction booklet shall be supplied with each kit. Detailed instructions with suitable illustrative drawings
shall be included in the instruction booklet to enable proper jointing work.
1.14 The kit which requires lesser skill for the cable jointing which can be done in shorter time and guarantee a
reliable and long operating life and reduced or no waiting time for erection shall be given preference.
1.15 Type Test:
1.16 The jointing kits offered, shall be fully type tested at CPRI as per the relevant standards. The tenderer shall
furnish four sets of the type test reports along with the offer. Offers without type test reports will not be
considered. For any change in the Design/type already type tested and the design/type offered against this
specification, the purchaser reserve the right to demand repetition of type tests without any extra cost in
presence of purchaser’s representative.
1.17 Type tests shall be carried out as per the test sequence given in I.S.: 13573 or VDE-0278 at C.P.R.I. Laboratory
as amended from time to time. The test report will have to be submitted for the test carried out.
2 ACCEPTANCE & ROUTING TESTS:
2.1 The supplier shall carry out all acceptance and routing tests as stipulated in the relevant standards in
presence of purchaser’s representative.
2.2 The purchaser reserves the right to insist for witnessing the acceptance/routing testing of the brought out
items.
15
SCHEDULE - “A”
Tender for PROVIDING & FIXING OF CABLE JOINTING KITS SUITABLE FOR L. T. CABLE UNDER RASTA PETH DIVISION
Name of the manufacturer:_________________________________ THE RATES SHOULD BE QUOTED INCLUDING ALL TAXES, LEVIES ,OCTROI, LABOURS etc.
Sr. No
Description Size Unit Rate in Rs.
1 2 4 5 6
3.5 C. X 35 Sq.mm. Per Kit
3.5 C. X 50 Sq.mm. Per Kit
3.5 C. X 70 Sq.mm. Per Kit
3.5 C. X 95 Sq.mm. Per Kit
3.5 C. X 120 Sq.mm. Per Kit
3.5 C. X 185 Sq.mm. Per Kit
3.5 C. X 240 Sq.mm. Per Kit
01
Providing & Fixing of L.T. STRAIGHT THROUGH JOINTS FOR HEAT SHRINKABLE TYPE JOINTS
3.5 C. X 300 Sq.mm. Per Kit
3.5 C. X 35 Sq.mm. Per Kit
3.5 C. X 50 Sq.mm. Per Kit
3.5 C. X 70 Sq.mm. Per Kit
3.5 C. X 95 Sq.mm. Per Kit
3.5 C. X 120 Sq.mm. Per Kit
3.5 C. X 185 Sq.mm. Per Kit
3.5 C. X 240 Sq.mm. Per Kit
02 Providing & Fixing of L.T. STRAIGHT THROUGH JOINTS FOR COMPOUND TYPE JOINTS
3.5 C. X 300 Sq.mm. Per Kit
List of approved make of cable joints
Sr. No. Name of Material Approved Makes.
1 LT cable joints
Reychem, Xicon, Denson, Cabseal, Safe Kit,
Venus. Etc or any approved make of M.S.E.D.C
.Ltd
SEAL & SIGNATURE OF THE TENDEDRER
OPENED IN THE PRESENCE OF: J M (F &A) J. E. Dy. E. E.(O) Executive Engineer Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn
16
SCHEDULE - “B”
Tender for PROVIDING & FIXING OF CABLE JOINTING KITS SUITABLE FOR 11 kv & 22 K.V. X.L.P.E./PILC CABLE UNDER RASTA PETH DIVISION
Name of the manufacturer:_________________________________ Compound type joints
THE RATES SHOULD BE QUOTED INCLUDING ALL TAXES, LEVIES ,OCTROI, LABOURS etc.
Sr. No. Particulars Rates (In Rs.)
For sizes as below. 11 Kv 22 KV
1 O/D termination cable PILC XLPE PILC XLPE
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
2. I/D termination cable.
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
3. Straight through joint
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm. Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
4. Transition Type 11 KV XLPE-PILC 22 KV XLPE-PILC Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
List of approved make of cable joints
Sr. No. Name of Material Approved Makes.
1 Cable jointing kits for 22 KV and 11 KV cables
Reychem, Xicon, Denson, Cabseal, Safe Kit, Venus. or any approved make of M.S.E.D.C .Ltd
SEAL & SIGNATURE OF THE TENDEDRER
OPENED IN THE PRESENCE OF: J M (F &A) J. E. Dy. E. E.(O) Executive Engineer Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn
17
SCHEDULE - “C”
Tender for PROVIDING & FIXING OF CABLE JOINTING KITS SUITABLE FOR 11 kv & 22 K.V. X.L.P.E./PILC CABLE UNDER RASTA PETH DIVISION
Name of the manufacturer:_________________________________ Heat Shrinkable type joints
THE RATES SHOULD BE QUOTED INCLUDING ALL TAXES, LEVIES ,OCTROI, LABOURS etc.
Sr. No. Particulars Rates (In Rs.)
For sizes as below. 11 Kv 22 KV
1 O/D termination cable PILC XLPE PILC XLPE
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
2. I/D termination cable.
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
3. Straight through joint
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
4. Transition Type 11 KV XLPE-PILC 22 KV XLPE-PILC
Size 3C x 70 Sq.mm.
Size 3C x 95 Sq.mm.
Size 3C x 120Sq.mm.
Size 3C x 185 Sq.mm.
Size 3C x 240 Sq.mm.
Size 3C x 300 Sq.mm.
Size 3C x 400 Sq.mm.
List of approved make of cable joints
Sr. No. Name of Material Approved Makes.
1 Cable jointing kits for 22 KV and 11 KV cables
Reychem, Xicon, Denson, Cabseal, Safe Kit, Venus. or any approved make of M.S.E.D.C .Ltd
SEAL & SIGNATURE OF THE TENDEDRER OPENED IN THE PRESENCE OF: J M (F &A) J. E. Dy. E. E.(O) Executive Engineer Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn Rasta Peth Dn
18
GENERAL CONDITIONS OF CONTRACT
1.01 The original tender Booklet purchased from the office of the Executive Engineer, Rasta Peth Division, Pune as
notified for any particular work shall alone be accepted as a valid tender on submission tenderer.
1.02 All works shall be measured not by standard measurements and according to the rules and customs and
usual method used in MSEDC and more particularly as mentioned in the item wise detailed technical
specifications contained in these documents.
1.03 All tenders except and unless exempted in writing by Executive Engineer, Rasta Peth Division, shall
accompany as solvency certificate from the revenue department concerned within whose jurisdiction the
tenderer resides or bankers certificates (Nationalized) of his financial stability for 50% of value of tender.
1.04 The work should be carried out within stipulated period given by concern Engineer-in-charge from the date
of handing over of site and material.
1.05 If it is found quality of work as well as performance is found unsatisfactory the contract is liable for
termination without giving any notice and at the entire risk of contractor. The security deposit paid in such
cases shall be forfeited.
1.06 The contractor shall not entrust the work on sub contract, transfer or assign the contract or any part thereof to
any other party. In case if it is not followed it will be treated as breach of contract and will be terminated at
contractors risk and cost.
1.07 The contractor should have his own experienced workmen, tools and tackles required to carry out the job.
The workers employed for the job should be well conversant with the work. In case of any accident to the
workers or outsiders the total responsibility lives with the contractors.
1.08 In case of any damage or loss to the MSEDCL’s materials, receipts and appropriate cost of the same will be
recovered from the contractor bill or security deposit.
1.09 Bill for the purpose of accepting bills the work carried out during the last month will be considered. The bill
should be submitted in triplicate to the concerned Engineer –in-charge for recording the measurement and for
onward transmission to Executive Engineer. The part payment will be made by this Office within stipulated
period subject to availability of funds from the receipt of measurements recorded bill from the concerned
Sub/Dn.`s Dy. Executive Engineer duly accepted by the contractor.
1.10 In case the contractor fail to carry out work in stipulated time penalty at the rate of ½% per delayed week or
part thereof subject to maximum 10% of the contract value of work done will be recovered from the bill.
1.11 The contract or any part thereof shall not be subject to change without the permission of accepting authority.
1.12 The contractor shall be responsible for and shall pay all the Compensation Act 1923 (hereinafter called the
said Act for injuries caused to the workman).
19
1.13 The contractor shall comply with all the laws and statutory regulations dealing with employment of labour
such as payment of wages Act 1936, the minimum wages act 1938, The Workmen’s Compensation Act, 1923,
The Industrial Dispute Act, 1947, the Maturity Benefit Act, 1938, The Provident Fund Registration Act etc. in
the employment of his Labour land obtain licenses, wherever required and maintain all the required and
prescribed records in the connection. Besides the above this work contract will be governed by General
Terms and Conditions of M.S.E.D. Co. Ltd. He has to comply all R.T.O., B & C, P.M.C. & P.C.B. & M.E.S.
Rules & especially for road cutting walls.
1.14 In any or type of dispute undersigned decision will be final and binding on you.
1.15 Legal dispute, if any will be under jurisdiction of Pune court of law.
1.16 Bankruptcy: - If the contractor shall become bankrupt or insolvent, or have a receiving order made against
him, or compound with his creditors, or being a company or corporation commence to be would up, not
being a member’s voluntary winding up for the purpose of amalgamation or reconstruction, or carry on is
business under a receiver for the benefit of its creditors or any of them, the employer shall be liberty (a) to
terminate the contract forthwith by notice in writing to the contractor or to the receiver or liquidator or to any
person in whom the contract may become vested or (b) to give such receiver, liquidator or other person the
option of carrying out the contractor subject to his providing a guarantee for the due and faithful
performance of the contract up to amount agreed.
1.17 Termination of contract: - Either party by giving the order party a notice writing 15 days in advance of its
intentions to do so may terminate the agreement but without dishonoring any commitment entered in to
prior to the date of termination notice and no party shall leave its commitment unfinished without
indemnifying the other party of possible damages, the contract shall also stands cancelled for any reason.
Such as legal processes act of state etc. which disable any of the parties hereto from functioning further.
1.18 Details: - Confidential: -The contractor shall treat the contract and everything contained therein as private
and confidential. In particular, the contractor shall not publish any information, drawings or photograph
concerning the works and shall not use the site of the purpose of advertising except with written consent of
THE EXECUTIVE ENGINEER, RASTA PETH DIVISION, MSEDCL, PUNE and subject to terms and
conditions as he may prescribe.
Signature of the Tenderer Executive Engineer
Along with Seal Rasta Peth Division
20
CONDITIONS OF THE WORKS
01) The work should be strictly carried out as per the M. S .E. D. C. L.’s method of constructions.
02) Time period: - The work should be completed with in 24 Hrs from work order issued by concerned Dy.
Executive Engineer or his authorized representative.
03) The Executive Engineer concerned/Testing or any other Officer Authorized by Dy. Executive Engineer will
supervise the work.
04) No tools, tackles and plants will be provided by M.S.E.D.C. Ltd.
05) The line shut down for erection of lines / repairs of cable faults will be arranged by our Dy. Executive
Engineer under Rasta Peth Division Pune after written request from the contractor but this will be normally
arranged on Thursday.
06) The problem of labour their lodging, Companying, medical aid payment, accident compensation etc. will be
entirely contractor’s responsibility and Company will not be party to it.
07) Besides all the terms and conditions incorporated in the tender, MSEDCL’s General Terms and Conditions of
the contract shall be applicable to the tenderer.
08) Any dispute between contractor and Engineer-in-charge will be settled by Executive Engineer, Rasta Division
and his decision will be final.
09) Guarantee: - The cable joint shall be guaranteed for a period of 12months from the date of erection.
10) The permission from R.T.O. for the transportation of heavy and lengthy material if required will have to be
arranged by the contractor. The Company will not take any responsibility towards any accident / damage to
the poles or to anyone’s property while transporting the material.
11) The contractor shall not be entitled to any claim for extra executed due to change or alteration unless the same
has been ordered in writing by Executive Engineer Pune and the payment thereof will be decided mutually.
12) In the event of any dispute arising out of the validity of the claim or as to the amount to be paid or allowed in
respect thereof the decision of the undersigned shall be final and binding.
13) Any allied work while fixing the jointing kits on urgent basis if agency is agreed to carry out the work as and
when required by S.D.O.& such work will be carried out in presence of co’s representative. The rates for these
allied work are as per schedule rates of CE, PZ, Pune.
13) MEASUREMENTS AND TERMS OF PAYMENT
13.01. Measurement of work completed shall be taken jointly by the authorized representative of the
company and contractor. Company’s will give intimation week in advance to the contractor for
recording the measurement and if the contractor or his representative fails to join the Co’s
representative, the former will record the measurements and the contractor shall have to accept these
measurements as correct and binding on him.
21
13.02. On the basis of joint measurements, payment will be made to the contractor by the Executive Engineer,
Rasta Peth Division according to the procedure and as far as possible within 2 months of recording the
measurements subject to availability of funds.
13.03. Payment will be made as per tender rate for all the works done according to the specifications and
measurements.
13.04. All materials and work for which payment is made in part or full shall become the sole property of the
Co. but this provision shall not relieve the contractor of his responsibility for the care and protection of
the materials and works at his own cost or of his liability to make good the damage, if any unless and
until the whole work is deemed to have been completed and handed over to the Co.
13.05. The bill for the work carried out should be submitted to the concerned Dy. Executive Engineer for
onward transmission to the Executive Engineer, Rasta Peth Division duly countersigned and having
check by Dy. Executive Engineer for passing in the following manner :
a. When bill amount reaches Rs. 50,000/-
b. Bill for one month for works carried out 100% payment will be made after receipt of bill duly
recorded .
14. Due to exigency of works if any extra item is used with the permission of Executive Engineer, Rasta Peth
Division the cost of thereof will be decided by Executive Engineer, Rasta Peth Division, Pune.
15. Before commencement of the work, material to be used should be got approved from the Co’s representative
i.e. Dy. Executive Engineer of the concerned Sub - Division.
16. Submission of tender offer by contractor implies that
a. Tenderer has read all the terms and conditions.
b. Tenderer has made himself acquainted / familiar with site conditions, where proposed
work is to be carried out.
c. Tenderer has made himself conversant with technical specification drawings enclosed for
the proposed work to be carried out.
17. Any risk that will be involved due to on registration of yourself, your labours under regulations of the
employment and Welfare Act 1969 lies on your part.
18. All the works under this tender would be subject to M.S. Electricity Dist. Co’s General conditions of contract
for work as stipulated in the Booklet.
19. Special attention is invited to the requirements that corrections / overwriting must be initialed and dated by
the Tenderer and that all pages should bear full signature of the Tenderer at the feet of each page, so also
rates should be quoted in words and figures.
22
20. Any amount or amounts due on account of damages or compensation for default or breach of contract by the
tenderer in which case instead of deduction of the said amount / amounts shall retained and the Co. shall
have the right or lean on amount / amounts so retained or withheld. Any amount / amounts which become
/ becomes payable by the contract to the Co. under a particular contract may be deducted by the Co. from
any amount due or being due by the Co. the contractor or under the same or any other contract.
21. All tenders / quotations, disputes or differences arising under out of or in connection with the contract, if
concluded shall be subject to the exclusive jurisdiction of Pune Court.
22. Income Tax at the appropriate rate will be deducted from your bill.
23. ½% penalty per delayed week will be levied, but maximum upto 10% of work order value will be levied.
24. Rates will be valid for 12 months.
25. In case of your failure to co-up in execution of any of the work order, the same will be got done through other
agencies even at higher rates and the difference in amount shall be recovered from your bills with MSEDCL’s
offices in Maharashtra or any other means available.
26. The inspection fee for inspection of line will be borne by Company, however contractor has to rectify the
defects pointed out by the Electrical Inspector. No extra payment will be allowed for said work.
27. The requirement of the jointing kits as & when required will be issued by the Dy. Executive Engineer /
Assistant Engineer / authorize representative of the concerned sub - division ... indicating execution period
proportionate to work involved. The execution period will be counted from the date of handing over of site.
28. Rates should be inclusive of all taxes. No separate Work Contract Tax/Service Tax /VAT will be allowed, if
applicable. It should be noted that no consideration will be given by this Office of on account of payment of
Work Contract tax /Service Tax /VAT to Government and it will be entire responsibility of contractor.
29. 10% checks for the kits used / works executed shall be exercised by the division office if necessary.
30. The contractor will have to transport the jointing kits at work site at his own cost. No extra payment will be
made by the MSEDCL to the contractor.
31. In case due to urgency if contractor has to supply any materials, the contractor will require to submit his bills
/ excise gate pass.
Signature of the Tenderer Executive Engineer
Rasta Peth Division
23
SAMPLE FORM FOR CONTRACT AGREEMENT
(To be executed on Rs. 100/-non-judicial stamp paper)
THIS AGREEMENT made the _______ day of _______ Between (The Executive Engineer, MAHARASHTRA
STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED, Rasta Division, Pune, of (Maharashtra State,
India) (hereinafter “the Employer” of the one part and M/s _____ _______ _______ _______ ___ ___ (name of
Contractor) of (city and Country of Contractor) (hereinafter “the Contractor”) of the other part.
WHEREAS the Employer is desirous that certain Contracts should be executed by the Contractor, viz,
“providing and fixing of joints of HT / LT cables as per MSEDCL’s Specifications, in __________Sub.Divn.
under Rasta Peth Division, Pune as defined in the bid document and has accepted a bid by the Contractor for
the execution of the Contract in the sum of Rs._________________ in words (Rs.____________ only)
(Hereinafter “the Contract Price”)
NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:
1. In this agreement words and expressions shall have the same meanings as are respectively assigned to them in the
Conditions of Contract referred to. The tender document shall be deemed to form and be read and construed as
part of this Agreement, viz.
a) Tender documents.
b) Employer’s Letter of Acceptance.
2. In consideration of the payments to be made by the Employer to the Contractor as hereinafter mentioned,
the Contractor hereby with the Employer to execute the Contract and to remedy defects therein in conformity
in all respects with the provisions of the Contract.
3. The Employer hereby convenience to pay the Contractor in consideration of the execution of the Contract
and the remedying of defects therein, the Contract Price of such other sum as may become payable under the
provisions of the Contract at the times in the manner prescribed by the Contract IN WINTENN whereof the
parties hereto have caused this Agreement to be executed in accordance with their respective laws the day
and year first above written.
Signed, Sealed and Delivered by the said
Executive Engineer Rasta Peth Division
In the presence of:
Signed sealed and delivered by the said M/s. :
In the Presence of: _________________________
24
SAMPLE FORM FOR PERFORMANCE SECURITY (BANK GUARANTEE)
(To be executed on Rs. 100 non-judicial stamp paper purchased in the name of issuing bank) To, The Executive Engineer MSEDC LTD, Rasta Peth Division Pune.
WHEREAS M/s ------------------------------------------------- (hereinafter called “the Contractor”) has undertaken, in
pursuance of Contract No. __________ dated _______ for ______________________ as defined in the order.
AND WHEREAS it has been stipulated by you in the said Contract that the Contractor shall furnish you with
a Bank Guarantee by Scheduled / Nationalized with the sum specified therein as security for compliance
with his obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Contractor such a Bank Guarantee;
NOW THEREFORE we hereby affirm that we are the Guarantor and responsible to you, on behalf of the
Contractor, up to a total of amount of guarantee) ____ (in words) _____, and we undertake to pay you, upon
your first written demand and without cavil or argument, any sum or sums within the limits of (amount of
guarantee) as aforesaid without your needing to prove or to show grounds or reasons for your demands for
the sum specified herein.
We hereby waive the necessity of your demanding the said debt from the Contractor before presenting us
with the demands.
We further agree that no change or addition to or other modification of the terms of the Contract or of the
Woks to be performed there under or of any of the Contract documents which may be made between you and
the Contractors shall in any way release us from any liability under this guarantee, and we hereby waive
notice of any such change, addition or modification.
SIGNATURE OF AUTHORISED SIGNATOTY AND SEAL OF THE BANK:
Name of Bank: - ________________
Address: - ________________
Date: - ________________
IN WITNESS WHEREOF THE SURETY HAS EXECUTED THIS DEED IN
PRESENCE OF WITNESS: (Signature)
Name and Address.
25
LETTER TO THE EXECUTIVE ENGINEER
To,
The Executive Engineer,
Maharashtra State Electricity Distribution Co. Ltd.
Rasta Peth Division
Pune
Dear Sir,
I / We agree to execute the work mentioned in the above tender at the rates herein tendered by me /
us subject to the conditions of the tender which I / We have carefully read and thoroughly understood the
same.
I / We hereby agree to keep this offer up to for 12 months after the returnable date of the tender and
shall be bound by the communication of acceptance dispatched within the prescribed time.
Yours faithfully,
Name, address and signature
of the Tenderer.