rapid-eps america · bs en 13374: 2013 class a & b a revolutionary edge protection system ......
TRANSCRIPT
www.rapideps.com
BS EN 13374:
2013CLASS A & B
A revolutionary edge protection system that’s quick & easy to install
TOTAL EDGE PROTECTION WITH EASE›› RAPID-EPS®AMERICA
www.rapideps.com
www.rapideps.com
Considerate EngineeringZERO WASTE TO LANDFILL
Rapid-EPS Ltd are constantly reviewing the
aspects and impacts which could be placed on the
environment by the activities associated with the
manufacture of our construction safety products.
Environmental awareness is
key to our success
in delivering a
sustainable
product
so
we employ the services of the United Registrar of Systems
to conduct regular and stringent audits on the processes
surrounding the manufacture of Rapid-EPS products.
The annual audits ensure our manufacturing processes
have minimum impact on the environment
and the scope of our activities
meet the requirements
set down to achieve
registration to ISO
14001:2004.
A completely sustainable product which has been designed to meet the challenges and expectations of the construction industry today.
RE-USE
Rapid-EPS products are
all designed and manufactured with multiple re-use in mind.
The robust design and substantial coating ensures that the system can be
constantly placed back into service.
On return from site, a full inspection of the product would take place which could possibly
identify certain defects.
If defects are found, the design of the product ensures that with minimum repair and general
refurbishment, the system would soon be serviced and placed back into stock for future use.
A fully compliant system offering many
years of service.
RECYCLE
The system will be constantly exposed to the
harsh construction challenges of today so it is inevitable that eventually, after many uses, the components may become damaged and visually unacceptable.
This doesn’t mean that the product is at the end of its life and that landfill is in sight!
The robust design of Rapid Fall Prevention Systems will ensure that
extended product life is achieved with minimum impact on the environment.
The process of repairing and re-coating the components has minimum
impact on the environment and ensures that the product has
extended life, is visually acceptable and fully
compliant for placing back into service
for many years to come.
QUALITY
Along with our environmental targets, the overall quality of our product is at the forefront of our
management processes.
The on-site performance and life expectancy of our products relies heavily on the design and manufacture of a robust and quality assured system and compromises
are not made at Rapid EPS when striving to meet these expectations.
As such, the United Registrar of Systems undertake regular and stringent audits on the scope of our activities to ensure we meet the
requirements set down to achieve registration to ISO 9001: 2008.
2
CONTENTS
3
Introduction ............................................................................4
Distributors .............................................................................6
Rapid Panel .............................................................................8
Concrete Frame Solutions ....................................................10
Steel Frame Solutions ...........................................................12
Timber Frame Solutions ........................................................14
Staircase Solutions ................................................................16
Free Standing ........................................................................18
Demarcation .........................................................................19
Trench Guard ........................................................................20
Heavy Duty Trench Guard .....................................................22
Formwork Solutions ..............................................................23
Rapid Net ..............................................................................24
Lift Shaft / Elevator Protection..............................................26
Rapid Cast-In Wall Anchor ....................................................27
Bay Safe End Panel ................................................................28
Bay Safe System ....................................................................29
Training .................................................................................30
Technical Service & Support .................................................31
Bespoke Fabrication ..............................................................32
Client Testimonial ..................................................................33
Anchorfast .............................................................................34
Clients....................................................................................35
3
Rapid Post & Panel
www.rapideps.com
EDGE PROTECTION FEDERATION
epf4
Rapid-EPS has many years of engineering experience dating back
to 1968. In 2004 the company became involved in manufacturing
engineered solutions for the protection against falls from height.
Company founders David Brine and Peter Hewson combined their
expertise to explore the possibility of designing a telescopic edge
protection system known today as the Rapid Post. The Rapid Post
design allows the system to be:-
• Installed 10 x faster than existing drill and fix systems
• Installed using no drills or fixings
• Installed with zero penetration to the concrete
• Ideal for post tension slabs
• Easy to install requiring minimal training
The innovative Rapid Post, with its ease of installation and overall
performance, has become the default solution for many companies
around the world.
Rapid-EPS employs over forty people at our 32,000 sq ft manufacturing
and training facility in Leeds, which is easily accessible from the M62
motorway.
Rapid-EPS has a wealth of expertise in providing fall protection for the
concrete frame, steel frame and structural timber frame industries
and offers the most efficient edge protection system available to the
construction industry today.
5
Rapid Post & Panel
5
PROVIDING TECHNICAL SUPPORT
A GLO
BAL SUCCESS STORY
AND SYSTEM ADVICE TO LEADING CONTRACTORS AROUND THE WORLD
EDGE PROTECTION FEDERATION
epf
ZERO
WASTE TO LANDFILL
Visit our 500m² in house industry approved training
facility in Leeds.
Over 500,000 Linear Metres of core equipment manufactured. That's the same distance from Leeds to Dundee.
10x
Proven to be 10x faster than traditional systems
Over 2 million linear metres of hired incident
free installation from distributors around the
world.
www.rapideps.com
Aluma/Safway
Houston, TX
Marion, OH
Linden, NJ
Portland, OR
Sacramento, CA
Phoenix, AZ
Tampa, FL
Atlanta, GA
Antioch, IL
Baltimore, MD
Las Vegas, NV
Buckley, WA
Grand Ledge, MI
Fontana, CA
A global success story
WORLDWIDE DISTRIBUTORSThe Rapid-EPS range of products has proven to be a success
on an international level. Our products are available from:
TARGET MARKETS FOR FUTURE EXPANSION
We are currently looking to introduce the Rapid-EPS
Impact Fence Rentals inc.
Toronto, Canada
SGB LLC
Dubai, UAE
Doha, Qatar
RAPID-EPS Pty LTD
Melbourne, Australia
Rapid-EPS Headquarters
Leeds, United Kingdom
UK/Europe
Hunnebeck
Altrad Beaver 84
6
range of products into more markets and would
welcome interest from potential distributors from:
South Africa
Malaysia
Singapore
South Korea
Sydney, Australia
Brisbane, Australia
Perth, Australia
Adelaide, Australia
Hong Kong
Alinco Inc.
Japan
77
GLOBAL DISTRIBUTORS
PRODUCT SUPPORT / DEMONSTRATION UNITWe have recently put into service, our demonstration unit, a purpose built vehicle for site visits and equipment demonstrations.
www.rapideps.com8
RAPID PANEL
More than just a barrier
The robust design ensures that the system not only meets but exceeds all
global safety standards and with unrivalled fixing centres of 2.7m.
The Rapid Panel has been engineered with longevity in mind.
All Rapid-EPS products are fully tested by Lloyds
British test house and have been proven to meet
and exceed the test requirements set out in
BS EN 13374:2013 for Class A and Class B
SYSTEM LOADING AVAILABLE ON REQUEST.
RAPID-EPS PANEL FULL - 2.7mPRODUCT CODE EU003 NA003
RAPID-EPS PANEL HALF - 1.4mPRODUCT CODE EU005 NA005
RAPID-EPS PANEL QUARTER - 655mmPRODUCT CODE EU085 NA085
For added protection all new panels are shipped
in purpose built stackable transportation aids
and are shrink wrapped to ensure the product is
in pristine condition on arrival.
99
With the RAPID Panel's integrated toe-board, we can offer new branding opportunities.
• Any RAL colour• Company logos
Rapid-EPS Ltd System Testing, Class A & Class B
The standard for temporary edge protection systems is known as BS EN 13374: 2013 and clearly states how the tests should be carried out.
In order to meet the requirements for a Class B edge protection
system, Class A static load testing should first be
carried out.
Class B
The edge protection must resist the same static loading requirements for Class A and additionally must pass a low dynamic impact
test using a specifically designed test rig and impact sphere.
This test applies impact energy of 0.5KJ to the top rail and 1.1KJ
to the lower areas.
Our Rapid Panels are manufactured using the latest robotic technology. Our robotic line alone is capable of manufacturing 3000 Linear Metres of panels per week.
Class A
The edge protection must resist a horizontal force of 0.3KN whilst maintaining elastic deflection within 55mm.
The top guardrail must also accept a vertical force of 1.25KN applied as an accidental loading.
The Rapid Edge Protection System has had numerous static loads applied up to four times this requirement.
9
www.rapideps.com10
RAPID POST• 10x faster than traditional drill and fix systems.
• No tools required! No drilling or fixings.
• Minimal training required.
• Fully compliant with BSEN 13374:2013 for Class A and B Protection.
• Zero penetration of the concrete.
• Ideal for post tension slabs.
• Compression mechanism guaranteed for two million cycles.
• Safety device on post clearly indicates correct assembly.
• Single, double or full height edge protection for total enclosure.
• Rapid Post extends up to 3.4 metres.
• Extend height by attaching Rapid Clamps.RAPID POST EXTRA• Longer post extends up to 4.3 metres
• Exactly the same benefits as Rapid Post
Offering a whole new approach to working safely at height
The innovative Rapid Post, with its ease of installation and
overall performance, has become a default safety solution for
many companies around the world.
Rapid Post offers significant savings in time and labour.
CONCRETE FRAME SOLUTIONS
RAPID CLAMP & RAPID LATCHAdd Rapid Clamps to Rapid Post for extended height or add Rapid Latches for full height edge protection.
EU020/NA020 EU021/NA021
EU001/NA001 EU002/NA002
For added protection, all new Rapid Posts and ancillaries are shipped in purpose
built stackable transportation aids and are
shrink wrapped to ensure the product is in
pristine condition on arrival.
EU015/NA015EU013/NA013
11
CURB GRABThis simple but very robust solution uses the standard support
post and has been tested to exceed global safety standards.
• Robust tensioning facility
• Adjustment range 150mm - 560mm
• Allows fixing to problematic areas including bridge work
and parapets with upstands of up to 560mm
SLAB GRABA fully tested solution where Rapid Post or drill and fix solutions
are precluded.
• Adjustable height on floor slabs: 150mm - 760mm thickness
• Robust tensioning facility
• Install a safe working area in minutes
DUAL PURPOSE STANDThe Dual Purpose Stand has been fully tested and proven to
exceed global safety standards for Edge Protection/Fall Prevention.
• Installed in just minutes with two anchor bolts
• Available in standard and dual height options
• 2.7m fixing centres
• Galvanised finish
ALTERNATIVES TO RAPID POST
CONCRETE SOCKET BASE The concrete socket base can be installed on any concrete
surface either at a pre-cast stage using inserts, or by drilling and
installing at a later date.
ADJUSTABLE PARAPET BRACKETA versatile solution for face mounting to most parapets.
Like all other Rapid EPS installations, the system can be installed at the
unrivalled centres of 2.7m. With both vertical and horizontal adjustment,
the solution lends itself to most challenges.
EU007/NA007
EU010/NA010
EU008/NA008
EU009/NA009
EU038/NA038
EU007-EH/NA007-EH
SYSTEM LOADING AVAILABLE ON REQUEST.
www.rapideps.com
We are a leading supplier of solutions for fixing to steel structures
STEEL FRAME SOLUTIONS
STEEL STRUCTURES
Where conditions allow, the rapid edge protection system can be
installed at ground level which significantly reduces exposure to the
dangers of working at height.
Pre-indexing of the system ensures the barriers are suitable for all
following works.
• The most efficient edge protection system available today with
fixing centers tested to 2.7m.
• Single or extended height edge protection for total enclosure
• Edge protection barriers in three sizes: full (2900mm), half
(1400mm) and quarter (655mm).
• Barriers are incredibly light but robust, allowing edge protection for
leading edge, internal voids and lift / elevator shafts.
• Flexible components allowing simple indexing
to suit variable slab detail.
Rapid-EPS's Steel Frame Solutions consist of 3 main components.
Webfix bracket: incremental
indexing facility to cater
for overhangs in excess of
900mm.
I –Beam clamp: Single fixing
and able to be fitted to any
hot rolled beam or column
with horizontal clearance to
cope with virtually all slab
overhangs on un-drilled
fabricated steel work.
Sacrificial sockets: Supplied
by others, to work in
conjunction with standard
Steel Frame System.
1313
BOLT ON SOCKETThe Bolt On Socket system is commonly used on steel frames and
requires the steelwork contractor to bolt the socket to the top of the
perimeter beam at centres specified by our technical team.
Utilising the steel frame support post and Rapid Panel, the
installation can be carried out swiftly and safely at ground level.
I-BEAM CLAMPThe solution is used for areas where web fix or sockets are
not suitable or where edge protection requirements have not
been considered at an earlier stage.
Again, utilising standard Rapid Barrier Panels and
support posts, the system is fully compliant with global
safety standards.
SACRIFICIAL SOCKETThe Sacrificial Socket system is commonly
used on steel frames and requires the
steelwork contractor to weld the socket to
the perimeter beam at centres specified by
our technical team.
Utilising the steel frame support post
and Rapid Panel, the installation can be
carried out swiftly and safely at ground level.
Web Fix Extension Brackets increase the capabilities of the
standard range of bracketary from 560mm, out to 1300mm.
WEB FIXThe most popular method of fixing to the steel frame is by utilising the
versatile web fix bracket. The bracket offers a vertical and horizontal
indexing facility and positioning of the fixing holes for the bracket would
be modelled by our technical team by using the most up to date software
packages.
SYSTEM LOADING AVAILABLE ON REQUEST.
EU042/NA042
EU092/NA092
EU024/NA024
EU103/NA103
EU091/NA093
www.rapideps.com
A revolution in CLT edge protection
TIMBER FRAME SOLUTIONS
TIMBER FRAME STRUCTURES
As with our Steel Frame solutions, where
conditions allow, our timber frame solutions can
be installed at ground level.
The system requires no secondary fix, the barrier
is installed on the section using the standard
structural timber equipment.
• The most efficient edge protection system on
the market, offering the widest fixing centres
at 2700mm, leading to fewer components
and vastly reducing installation time.
• Single or increased height edge protection
for total enclosure.
• Edge protection barriers in three sizes:
full (2900mm), half (1400mm)
and quarter (655mm).
• Barriers are incredibly light but robust,
allowing edge protection for leading edge,
internal voids and lift/elevator shafts.
1515
UNIVERSAL FACE MOUNT BRACKETSFace fix only requires five hecotopix screws
into timber or 2 M16 Thunder Bolts to timber
(supplied by others)
TIMBER SOCKET BASESSurface fix only needs three or
four fixings depending on which
option you require.
WIND LOADING & CALCULATIONS AVAILABLE ON REQUEST
ADAPTER FACE PLATEWeb fix bracket (with four fixings using adapter face plate)
incremental indexing facility to cater for overhangs in excess
of 900mm.
DUAL PURPOSE STANDAnother proven solution which has been used by contractors around the world.
As with all Rapid-EPS products, the Dual Purpose Stand has been fully tested and
proven to exceed global safety standards for edge protection/Fall Prevention.
A highly visible and efficient solution with a galvanised finish, the Dual Purpose Stand requires installation by means of four heco-topix screws (supplied by others).
With 2.7m fixing centres, the versatile solution can be installed in minutes.
EU010/NA010
EU043/NA043
EU007/NA007
EU041/NA041
www.rapideps.com16
STAIR RAIL CONNECTOR BRACKET
The Stair Rail Connector Bracket
can be quickly installed on any rapid
post installed on a landing to provide
handrails when speed is a necessity.
STAIR HANDRAILSHandrails are available in eight different
lengths ranging from 280mm - 3000mm.
Offering protection to all configurations of stairs & stairwells
The innovative telescopic stair rail system with debris guard can provide
fall protection to the most challenging areas.
With fail safe fittings, the solution can be installed quickly by means of
drill and fix, threaded inserts, pre-cast sockets or clamping.
STAIRCASE SOLUTIONS
EU031/NA031
EU034/NA034
EU030/NA030
EU029/NA029
17
The Concrete Socket Base can be installed on
any concrete stair, either
at a precast stage using
inserts, or by drilling and
installing at a later date.
As an added feature, most
of the Rapid-EPS stair
system can be upgraded
with Debris Guards which
come in a range of lengths.
NEWEL POSTSThere are 3 stairwell posts to
suit every eventuality.
The regular stairwell post has antiluce
fitting on a single side and the right and
left posts have fittings facing out at 90
degrees.
HANDRAILSWe have a selection of Handrails
spanning from 280mm to 3 metres
to cope with any configuration.
EU028/NA028
SRO EU078/NA078
DGL1 EU047/NA047
SR1 EU060/NA060
SR2 EU072/NA072
SR3 EU073/NA073
SR4 EU074/NA074
SR5 EU033/NA033
SR6 EU061/NA075
SR7 EU032/NA032
SR8 EU062/NA062
EU071/NA071
EU070/NA070
DGL2 EU075/NA079
DGL3 EU076/NA076
DGL4 EU077/NA077
DGS1 EU064/NA064
DGS2 EU045/NA080
DGS3 EU067/NA067EU010/NA010
FREE-STANDING EDGE PROTECTION
The user friendly system that requires zero penetration the concrete slab
www.rapideps.com18
FREE-STANDING EDGE PROTECTION
The Free-standing footplate forms a sturdy durable fall protection
system for flat roofs and slab edges. The Free-standing footplate
works with our existing Dual Purpose Stand and Rapid Panel and
has been designed to be super lightweight for installation by one
person. An Ideal system that folds flat for storage and transport.
• Robust rubber base to prevent slipping
• Zero penetration to the working surface
• Designed and tested to work with 75 kg (165lbs) ballast per
footplate
• System designed to meet and significantly exceeds BS EN
13374:2013 Class A
• System meets and exceeds OSHA Standard 1926.502
EU035/NA035
FREE-STANDING EDGE PROTECTION
1919
DEMARCATION
EU035/NA035
EU093/NA093
FREE STANDING SOLUTIONS – FOOTPLATEUtilising the Hi-Vis Footplate and Standard Support Post, free standing
demarcation can be swiftly installed.
FREE STANDING SOLUTIONS – BALLAST BRACKETWith the addition of the Ballast Bracket and some “off the shelf”
ballast blocks, you can convert Rapid-EPS freestanding demarcation
into Class A Edge protection.
PEDESTRIAN SEGREGATION & DIRECTIONAL BARRIERSEnsure your site visitors and operatives are safely directed away from potential
hazard areas by utilising the simplistic pedestrian directional barrier solution.
Quick and easy to use, the solution can be installed in minutes by assembling
just three standard components.
DEMARCATIONUtilising the same three free standing components, safe compounds for use as
waste disposal or storage areas can be created in just minutes.
CLASS “A” EDGE PROTECTIONFree standing countered weighted Rapid Edge Protection can be installed
quickly and easily by attaching the purpose designed ballast bracket to the
flexible Hi-Vis Footplate.
Free standing edge protection systems derive their support from weighted
components fixed to additional supporting systems which can be positioned on
flat surfaces within atleast 2 metres of the edge of a fall area.
Like all Rapid-EPS systems, the free standing solution has been tested at the
unique 2.7m centres and has been proven to meet the requirements for a
Class A system as laid down in the standard BS EN 13374: 2013.
Standard Rapid-EPS components can be deployed to assist with a number of site demands.
www.rapideps.com20
TRENCH BOX CLAMPAn adjustable clamp
with a speed thread that is compatible with box
thickness up to 250mm.
TRENCH SHEET CLAMPAn adjustable clamp with
a speed thread that is compatible with
sheets up to 30mm.
TRENCH GUARD POST Galvanised steel tube
1220mm long with plastic end cap.
Protect work personnel from open excavations and falling debris
• Trench Guard conforms to the latest temporary edge protection
Legislation OSHA 1926.502 and BS EN 13374.
• Trench Guard has a built in toe board to prevent debris from falling
onto operatives working below.
• Fits all types of trench sheets and piles.
• Lightweight for ease of use by site operatives and quick installation
when used in conjunction with Rapid-EPS post and clamps.
TRENCH GUARD
TRENCH GUARD PANEL - 2.7M PRODUCT CODE TG001
TRENCH GUARD PANEL - 1.8MPRODUCT CODE TG001
TRENCH GUARD PANEL - 2.25M
PRODUCT CODE TG001
TRENCH GUARD CORNER PANEL
PRODUCT CODE TG001
TELE. SHEET/BOX CLAMPAdjustable with the aid of a telescopic section held with a rapid pin. It is compatible
with boxes from 0mm to 220mm.
TG002 TG003 TG032 TG004
2121
The extendable arm which supports the trench ladder can be moved from side to side to suit left or right handed installation.
COLLAPSIBLE LADDER PLATFORM
• Manufactured from mild steel with
powder coated finish.
• Specially designed for backhoe type boxes
and sheeted trenches.
• Cantilevered platform enables safe side
entry on to ladder.
• Standard pole ladder fits directly onto the unit
and is locked in place by 2 ladder clamps.
• Adjustable clamps fit directly onto a
trench box or sheets (2 sheet clamps and 2 box
clamps supplied with platform).
• Adjustable front legs for ease of levelling.
• Collapsible sides and gate for ease of storage.
• Weight - 133kg TG007
HEAVY DUTY TRENCH SAFETY
Protect work personnel from open excavations and falling debris
22
www.rapideps.com22
HEAVY DUTY TRENCH SAFETY
This trench/sheet pile system takes all the benefits of traditionally used systems but includes a heavy duty panel which can be used again and again. The panel is designed with longevity in mind and can be used with a number of other Rapid EPS systems.
• Trench Guard conforms to the latest temporary edge protection
legislation BS EN 13374:2013 Class A & B and OSHA 1926.502.
• Trench-guard has a built in toe board to prevent debris from
falling onto operatives working below.
• Fits all types of trench sheets and piles.
• Lightweight for ease of use by site operatives and quick
installation when used in conjunction with trench post and
telescopic trench clamp.
TG007
23
HEAVY DUTY TRENCH SAFETY
Rapid-EPS wetdeck equipment is for use on any type of formwork
FORMWORK SOLUTIONS
• The 1295mm High Fence Panel maintains safe height above concrete pour.
• Quick Connect System eliminates tie-wire.
• Our standard range includes brackets to fit onto most timber and aluminium
formwork systems.
EU036 EU037 EU003 EU107
www.rapideps.com24
BENEFITS• Tested with 2 x 100kg weight drops from 7m
(Exceeding British Standard)
• Fully certifed by Lloyds British
• No tower crane after 1st lift
• Electric hoist required for use by installer after first lift
• Lifespan of Rapid-Net is 5 years
• Net Rated to 5.1kJ
Tested and proven to perform beyond the requirements laid down in both British, EU and US standards.
The Rapid-NET utilises the Class B1 net and comes with 70 x 70mm mesh and 20mm x 20mm debris net
overlay as standard, which has been proven to arrest 2 x falls of 100kg from a height of 7m, surpassing
BSEN1263-1&2 (Safety Nets).
The elasticity of the net, together with a slight deformation of the frame, ensures that the impact of a fall is
absorbed, considerably decreasing the risk of injury to the person falling.
The combined debris overlay net which fully covers the fall arrest net, is able to catch considerably smaller
particles of debris, therefore protecting people and property at ground level.
We offer a full design service from quotation to detailing including full support throughout.
SAVINGS• Saving on labour/installation costs
• No use of site crane after first lift
• Extended life expectancy
The most robust and user friendly net system available today
RAPID-NET
Copies of our full test report are available on request.
The Rapid-Net holding 2x 100kg weights at our in-house testing facility.
2525
Rapid-NET is designed to fulfil all your debris containment and fall arrest needs in one
product. The system has four variants which can be utilised to fully protect all your
projects.
FALL ARREST & DEBRIS CONTAINMENT NET
The specifically designed lifting device allows for
the Rapid-Net to be lifted independently up the
building after the first lift with a crane. (See Rapid-
Net installation guide for more information.)
The FULL net
6m x4.5m
The HALF net
4m x4.5m
The RIGHT CORNER net
6m x 4.5m
The LEFT CORNER net
6m x 4.5m
Rapid-EPS offer the same full quoting
and detailing service with our nets as we
do with our edge protection products.
Rapid-Net Lifting Device
www.rapideps.com26
LIFT SHAFT/ELEVATOR PROTECTION
Offering a whole new approach to Lift Shaft/Elevator safety
Unlike any other system available to the construction industry,
the unique Lift Shaft/Elevator Gate offers protection to
multiple core openings with just one Lift Shaft/Elevator Gate.
The solution utilises light but extremely robust and user
friendly components and features a secure key activated
locking gate. Standard Rapid-EPS components such as the
innovative Rapid Post and Panel are utilised when completely
securing the protected areas and with no need for any
penetration of the working surface, multiple lift / elevator
shafts are protected in just minutes.
As with all Rapid-EPS components, the Rapid Lift Shaft/Elevator Gate has been certificated by
Lloyds British in line with BS EN 13374:2013.
Using standard Rapid-EPS
components, in conjunction with
a Rapid Lift Shaft/Elevator Gate,
a secure compound can be built
to protect valuables and control
access.
EU040/NA050
LIFT SHAFT/ELEVATOR PROTECTION
RAPID CAST-IN WALL ANCHOR
BENEFITS• Versatile – only one anchor required.
• Higher load capacity of the Rapid Cast-In Wall Anchor means it can be used with
horizontal cable for multiple anchorages,
as well as for single worker hook-ups.
• Eliminates the need to stock multiple types
of products. Ensures the right product is
available when you need it.
• Heavy duty.
• All steel body is resistant to breakage .
• Reduces the likelihood of injury due to
unsafe practices.
SAFER… PROVIDES MORE SECURITY• Rapid Cast-In Wall Anchor can be
positioned where you want it.
• Reduces chance of unsafe installation.
• No slings, ladders or special requirements.
• Workers can always be tethered without
being put at risk.
• Significantly stronger than tradition tether
straps.
• Designed to prevent abrasion, which
increases the life expectancy of the
operatives PFPE.
FASTER… SAVES TIME• Quick to install, no additional reinforcement
or special placing requirements.
• Simply nail or wire in-place at the
desired location.
PROVEN AND TESTEDRapid Cast-In Wall Anchor conforms to ANSI and CSA
Safety lanyard requirements for single person fall arrest
as well as meeting local and national occupational
health and safety codes for personal fall arrest.
Ingenious solutions for on-site safety requirements
RAPID CAST-IN WALL ANCHOR
HORIZONTAL CABLES Caution must be exercised when the Rapid Cast-In Wall Anchor is used with horizontal cables due to the amplification of the horizontal load component at the point of attachment to the structure. Small angles of sag can impose large amplification of loads at the attachment points.
When the Rapid Cast-In Wall Anchor is used with horizontal cable applications, a professional engineer must approve the design and use prior to installation.
27
PATENT PENDING
EU111
BAY SAFE END PANEL
SCAFFOLDING SOLUTIONS
28 www.rapideps.com
• Designed by Scaffolders, for Scaffolders.
• Allows fast installation of Loading Bay area using traditional tube
and fitting.
• Challenges the concept of Loading Bay installation safety.
• Reduces the time to install end protection to the Loading Bay
from set out to final use.
• Works as an Advanced Guardrail whilst building the Loading Bay.
• Works as part of the Rapid Bay Safe system.
• Complies with BS EN 13374:2013 Class A
SC009
29
BAY SAFE END PANEL BAY SAFE SYSTEM
SCAFFOLDING SOLUTIONS
29
• Utilising existing Rapid-EPS equipment, we can now include a new
loading bay system ‘Bay Safe’ in your line of edge protection.
• The robust but user friendly Bay Safe System is suitable for use with
telehandler or forklift trucks on most low rise structures.
• The Bay Safe system is available in 2.2m (7'-2”), 2.8m (9'-2”) and
3.4m (11'-2”) lengths with custom lengths available on request.
• Bay Safe works in harmony with all our existing systems and is also
suitable for use with traditional scaffolding.
• The system is fully compliant with BS EN 13374:2013 and OSHA
1926.502.
• Bay Safe is quality assured and tested by Lloyds British.
• Finished in a durable powder coating, available in red as standard or
your company's colours.
• A well-balanced design means the system can be operated by one
person.
2.8m - SC004
3.4m - SC003
2.2m - SC005
SC006
SC007
www.rapideps.com
A 500 m2 in-house industry approved training facility
With 500 square metres of demonstration, training area,
and classroom, we believe we have all levels covered.
With Concrete Frame, Steel Frame and Structural Timber Frame models installed, we can ensure the
industry standard for selection and use of temporary
edge protection is fully understood by everyone.
At our recently upgraded training centre in Leeds,
product training and training covering the standard for
temporary edge protection systems, BS EN 13374 is
available to all customers.
The level of training undertaken at the Rapid Centre will
involve practical sessions including product installation
and hazard identification, and also a theory session.
All delegates will be required to complete the formal Edge Protection Federation test paper.
On completion of a successful test paper, the delegates
will be issued with the Edge Protection Federation Operative card which will be valid for 5 years.
TRAINING
COURSE CONTENTTea and coffee on arrival.
Introductions and brief overview of the course.
COMPANY OVERVIEWRapid-EPS company overview and memberships
Solutions available
Project management and service package
EDGE PROTECTION FEDERATION COURSEPurpose of course and agenda
Regulations and competence
Need for fall arrest/restraint
The standard for temporary edge protection
All bbout BS EN 13374: 2013
APPLICATIONSEquipment
Component types
Hazards
DEMONSTRATION / PRACTICAL SESSIONComponent overview
Hazard identification
Applications
Open discussion and Q&A over tea/coffee
Written test paper
30
EDGE PROTECTION FEDERATION
TRAINED BY
TRAINEDINSTALLER
EDGE PROTECTION SYSTEM
EXP. 2021
CERTIFIEDINSTRUCTOR
EDGE PROTECTION SYSTEM
EXP. 2021
STEP 1 - ASSESSMENTOn receipt of drawings, the team will make assessments of the areas to be protected.This process acts as a working brief and ensures any potential problem areas are considered and discussed at the early stage of the enquiry. This assists in making sure the most suitable and efficient solution is supplied.
STEP 2 - QUOTATION A quotation will be prepared with supporting outline drawings showing the assessment of the areas to be protected and the general quantity of perimeter edge protection required. This process offers the client the opportunity to question the installation requirements and consider the overall project costs.
STEP 3 - DETAILING On instruction to proceed, the technical team will produce the detailing requirements and final positioning of the edge protection solutions. Supporting guidance and drawings can be supplied at this stage which will assist the installers with positioning the correct equipment in the correct areas.
STEP 4 - SUPPLYOn instruction from the client, the deliveries of equipment will be made to site in a phased manner and at a time to suit site activity. This ensures you are getting what you need, when you need it. Project management and site support is on hand from the start of your project until completion.
3131
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REV16136-C-02FILE LOCATION: Z:\DRAWING FILES\2016\16136 - PEMBROKE SCHOOL\BLOCK A\16136 - BLOCK A - STAIR C
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F : 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
Pembroke School | Block A
Stair C | Socket Layout | Flight 02
PS 21/11/2016 ·
NOTE: M16 INSERTS TO BE USEDTO BE FLUSH WITH THE SURFACE
Front View1:30
Top View1:30
Iso View1:40
60 90
90 60
6060
90
A Support Service to Equal the Quality of Our Products
TECHNICAL SERVICE & SUPPORT
32
350
24002850
3075
225
2700 1375
ELEVATION A
NEEDLES REMOVED
EPS PANELSOVERLAPPED
2.7 Panel 1.375 Half Panel
- - - -
CONTRACTOR:
PROJECT:
DRAWING TITLE:
without written consent of the proprietorsin any form whatsoever, is not allowedReproduction or disclosure to third partiesProperty of TITAN DESIGN SERVICES
Tel: 0161 682 4732Fax: 0161 684 3603
Design
Checked
Project No.
Scale
Drawing No. Rev.
STATUS:
Checked ByDescription DateRevision By
Design Check CertificateThe initial and dating of the "Checked by" box acts as an Ischebeck Titan Design Check Certificate in accordance with Ischebeck Titanprocedures.Any perceived risk is highlighted by a risk note on this drawing for site action.The Construction Issue check is carried out by a Senior Engineer and is equivalent to a Category 2 check as defined in BS5975:2008.Senior Engineers are qualified and approved for Category 2 checks by the Engineering Director.
Customer approval on CIR form received from: Date:
Dunne
One Blackfriars
Edge protection system layout to level 32
14 143E 01 -
R.S 23/03/2015
nts
----
P.L 23-03-2015
--
--
-
-
-
- -
Needle positions indicative only
LEVEL 32
70 No. EPS Rapid posts104 No. 2.7m EPS Panels (2No per height)12 No. 1.375 EPS half Panels (2No per height)
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REVDEPT SK01FILE LOCATION: Z:\DRAWING FILES\ZZ - MISC JOBS - FOLDER TO BE MOVED\3 TYPES
RAPID-EPS RAPID-Edge Protection Systems Ltd.T : 0113 252 8883 | F : 0113 307 4990 | W : rap ideps .comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
EDGE PROTECTION METHODS
RAPID-EPS
GENERAL ARANGEMENT
RL 27 MAY '16 ·
Set Up 3 Rapid-EPSConcrete SocketBase (EU010) fittedwith Rapid-EPSStandard SupportPost (EU011) tosupport RapidPanel.
Set Up 2 Rapid-EPS DualPurpose Stand(EU007) tosupport RapidPanel.
Set Up 2 Rapid-EPS DualPurpose Stand(EU007) tosupport RapidPanel.
Set Up 3 Rapid-EPS Concrete SocketBase (EU010) fitted withRapid-EPS Standard SupportPost (EU011) to supportRapid Panel.
Set Up 1 (Full Height) Rapid-Post (EU001) fitted withRapid-Clamps (EU020) and Rapid-Latch(EU021) to support Rapid Panels andRapid Top-up Panel
Set Up 1 (Double Height) Rapid-Post (EU001) fittedwith Rapid-Clamps (EU020)to support Rapid Panels
Set Up 1 (Single Height) Rapid-Post (EU001)to supportRapid Panels
Set Up 1 (Full Height) Rapid-Post (EU001) fittedwith Rapid-Clamps (EU020)and Rapid-Latch (EU021) tosupport Rapid Panels andRapid Top-up Panel
Set Up 1 (Double Height) Rapid-Post (EU001) fittedwith Rapid-Clamps (EU020)to support Rapid Panels
Set Up 1 (Single Height) Rapid-Post (EU001) tosupport Rapid Panels
Using the most up to date detailing software available, our dedicated Technical advisors are on hand to ensure your
project is in safe hands.
PROJECT MANAGEMENT
Offering expert advice from enquiry stage through to supplying the equipment, the Rapid Team are dedicated to sorting
out potential fall prevention problems on the drawing board and not on site.
BESPOKE FABRICATION
In-house design, research, testing & development department
www.rapideps.com32
With an in-house R&D department and purpose built test facility, we are uniquely capable of designing all new products or working with your existing range of products to achieve quality solutions.
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REV16218 - SK02FILE LOCATION: Z:\DRAWING FILES\2016\16218 - BUCKHOIST GATE\16218 - SK02
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F: 0113 307 4990 | W: rap ideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
Buckhoist Gate
USA Hoist
General Arrangement Drawing
RL 8 Oct '16 ·
502
1400
548
1565
1505
2410
2450
1691
2390
737.5737.5
OUTER VIEW1:16
INNER VIEW1:16
ISO VIEW1:16
Cut List30x30x2.5 SHS @ 2450mm LG. 230x30x2.5 SHS @ 2390mm LG. 230x30x2.5 SHS @ 2390mm LG. 230x30x2.5 SHS @ 738mm LG. 430x30x2.5 SHS @ 1565mm LG. 125x25x2 SHS @ 678mm LG. 125x25x2 SHS @ 678mm LG. 140x40x4 SHS @ 25mm LG. 420mm Ø Bar @ 700mm LG. 110mm Ø Bar @ 85mm LG. 150x6 Flat Bar @ 35mm LG. 440x6 Flat Bar @ 48mm LG. 440x6 Flat Bar @ 15mm LG. 430x3 Flat Bar @ 35mm LG. 213mm ID Round Tube @ 40mm LG. 8Scaffold fittings 4Half Panel Toe Board 2Nut 4Bolt 4Washer 8
We are able to produce sketch concepts and fully
operational prototypes, through to detailed fabrication
drawings and product lines produced in large volume.
We can arrange site visits to establish specific
and unique solutions to a variety of needs.
As we have the facility to fully test products
to international standards at our comapny
headquarters, we can ensure your new product
will perform as soon as it arrives on site.
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REV16209 - SK 01FILE LOCATION: Z:\DRAWING FILES\2016\US16209 - AMERICAN BRIDGE BRACKET\16209 - SK01
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F: 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
AMERICAN BRIDGE BRACKET
RAPID-EPS
MOCK-UP SKETCH
RL 10 AUG '16 ·
675
150
1163
25.552
5252
1375
679
150
50
225
45
50
Ø1818.5
33
Loading Bay Gate Fabrication Drawings
Prototype Fabrication Drawings
Initial Concept Sketch
Loading Bay Gate Fabrication Drawings
Complete Production Model
Working Prototype
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REVAD01FILE LOCATION: Z:\DRAWING FILES\2015\15178 - ALLIED SCAFFOLDING PRODUCTS\AD GATE A
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F : 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
ACCESS GATE
ALLIED SCAFFOLDING PRODUCTS
GENERAL ARANGEMENT
RL 11 Dec '15 ·
24
55 654 25.5
719.5
213.
565
021
3.5
583
25
25
1077
498.
580
498.
5
857.5
125.5
64.5
FRONT VIEW1:5
PLAN VIEW1:5
SIDE VIEW1:5
ISO VIEW1:8
62.5
1
2
2
3
3
4
CUTTING LISTSquare Hollow Section1 40x40x3 650LG 1 OFF2 25x25x1.5 1077LG 2 OFF3 25x25x1.5 654LG 2 OFF4 40x40x3 25LG 2 OFF150x75xØ4mm/6mm Mesh5 604x386 2 OFFLaser Parts7 80x72x8 (15178-LSP1) 2 OFF8 125x76x8 (15178-LSP1) 2 OFF9 50x40x8 (15178-LSP1) 2 OFF10 604x255x3 (15178-LSP1) 1 OFFMISC.11 M12x40 BOLT 2 OFF12 M12 NYLOC NUT 2 OFF13 M12 WASHER 4 OFF14 SCAFFOLD FITTING 2 OFF15 "SELF CLOSER" 1 OFF
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REVAD SK 002 (2)FILE LOCATION: Z:\DRAWING FILES\2015\15178 - ALLIED SCAFFOLDING PRODUCTS\AD MAN'OLE
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F : 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
AD PRODUCT RANGE
ALLIED SCAFFOLDING
LADDER ACCESS HATCH
RL 28 Sept '15 ·
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REV16240 - SK02FILE LOCATION: Z:\DRAWING FILES\2016\16240 - ALLIED SCAFFOLD LOADING GATE\16240 - SK01
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F: 0113 307 4990 | W: rap ideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
LOADING BAY FRAME
ALLIED SCAFFOLD
SKETCH DRAWING
RL 25 OCT '16 ·
202.
547
081
7.5
920
1020
1860
202.
581
7.5
1020
840
202.5 615 202.5
= = = =
==
84040
120
120
Ø16Ø16
Ø16
Ø16
22
22
Ø30
620
620
25
25
END VIEW1:8
FRONT VIEW1:8
ISO VIEWNTS
EDGE PROTECTION FEDERATION
epf
A3
IF IN DOUBT ASK
BYDATEREV DESCRIPTION
DRAWN CHECKED DATE
TITLE:
CLIENT:
DRAWING No.
PROJECT:
REVA3FILE LOCATION: Z:\DRAWING FILES\2016\16240 - ALLIED SCAFFOLD LOADING GATE\16240 - SK01
RAPID-EPS RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F : 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
·
3411
1008
1008
1008
2211
2811
197
615
197
40 1653 25 1653 40
40 1353 25 1353 40
197
615
197
197
615
197
40105325105340
CLIENT TESTIMONIALRapid-EPS have made huge improvements
to many of the products currently utilised in
the scaffolding industry. I would recommend
their ladder gates, trap doors and loading
bay gates, and testify to the increased quality
over what is currently available in the market.
Their in-house design and engineering team
are another benefit of using Rapid-EPS when
looking to fabricate a bespoke product.
Allied Scaffolding Limited would also
recommend the Rapid Edge protection
post and mesh panels as being the best
such product that we have worked with.
Many of our customers now insist on this
product when specifying edge protection.
Pete Ferris
Director - Allied Developments
The AnchorFast system has been specifically
designed to provide short term safety measures
for low frequency, work at height operations.
The AnchorFast system is ideal for short
term operations where the use of collective
perimeter edge protection cannot be used.
The modular AnchorFast system has been designed with
ease of use in mind. The components are robust but easy
to handle and simple to assemble which together offers rapid
protection against the hazards associated with working at height.
A fall restraint solution for low frequency operations
ANCHORFAST
www.rapideps.com34
Copies of our test certificates are available on request.
Certification test methods
STAGE ONEQUICK RELEASE OFSUSPENDED 100KGWEIGHT
STAGE TWOWEIGHT FALLS FREELY FOR2500mm BEFORE SYSTEMACHIEVES TENSION STAGE THREE
WHEN SYSTEM ACHIEVESTENSION, WEIGHTS MUST NOTMOVE MORE THAN 1000mm
0m 1m
RIGOROUS TESTINGThe AnchorFast System has been extensively tested by Lloyds British
Testing Ltd to the guidelines set out in BS EN 795: 2012: Type E
Protection against falls from a height – Anchor devices – Requirements
and testing. The independent test documents are available upon request.
AnchorFast should be deployed in conjunction with site specific risk assessments and method statements.
CLIENTS
Rapid-EPS is proud to have worked with great clients around the world
35
www.rapideps.comTotal protection with ease
Rapid-EPS Limited
Unit D, Treefield Industrial Estate
Gelderd Road, Gildersome
Leeds LS27 7JU UK
Head Office: +44 (0)1132 528883
TIMBERSTEEL