AC Voltage (V~)#61-312#61-314

Digital MultimeterInstruction Manual

CAT II

MAX

IMPORTANT SAFETY INFORMATIONRead and understand all of the instructions andsafety information in these operating instructionsbefore using this meter. Use the meter only asspecified in this manual; otherwise, the protectionprovided by the meter may be impaired.

A WARNING statement identifies hazardousconditions and actions that could cause bodilyharm or death.

WARNINGSTo avoid possible electric shock, personal injury ordeath follow these guidelines:• Do not use if meter appears damaged. Visually

inspect the meter to ensure case is not crackedand back case is securely in place.

• Inspect and replace leads if insulation is dam-aged, metal is exposed, or probes are cracked.

• Do not use meter if it operates abnormally asprotection maybe impaired.

• Do not use during electrical storms or in wetweather.

• Do not use around explosive gas, dust, or vapor.• Do not apply more than the rated voltage to the

meter. • Do not use without the battery and the back case

properly installed.• Remove the test leads from the meter before

removing battery cap.• Do not attempt to repair this unit as it has no

user-serviceable parts.• Disconnect power and discharge capacitors

before testing resistance, continuity, diodes,capacitance or temperature.

• Replace battery as soon as low battery indicator appears.

• Use the proper terminals, function and range foryour measurements.

To protect yourself, think "Safety First":• Voltages exceeding 30VAC or 60VDC pose a

shock hazard so use caution.• Use appropriate personal protective equipment

such as safety glasses, face shields, insulatinggloves, insulating boots, and/or insulating mats.

CAT II

MAX

• Before each use:- Perform a continuity test by touching the

test leads together to verify the functionalityof the battery and test leads.

- Use the 3 Point Safety Method. (1) Verifymeter operation by measuring a knownvoltage. (2) Apply meter to circuit undertest. (3) Return to the known live voltageagain to ensure proper operation.

• Never ground yourself when taking electricalmeasurements.

• Connect the black common lead to groundbefore applying the red test lead to voltage.Disconnect the red test lead from the voltagefirst.

• Always work with a partner.• When using the probes, keep fingers as far

behind the probe tips as possible.

Ranges & Accuracies: AC Converter: 61-312 model is averagingsensing, rms calibrated; 61-314 model is true rmssensing. Accuracy: Accuracy is specified as +/-(apercentage of the reading + a fixed amount) at23°C±5°C (73.4°F ± 9°F), less than 75% relativehumidity.Temperature Coefficient: 0.1 times theapplicable accuracy specification from 32°F to64°F and 82°F to 122°F (0°C to 18°C ; 28°C to50°C).

~

SymbolsRisk of electric shock

See instruction card

DC measurement

Equipment protected by double or reinforced insulation

Battery

Earth

AC measurement

Conforms to EU directives

Ranges & Accuracies

Func

tion

Rang

e &

Reso

lutio

nAc

cura

cyOv

erlo

ad P

rote

ctio

n

DCVo

ltage

400.

0m/4

.000

/40.

00/4

00.0

/600

V±(

0.8%

+4)

50~6

0Hz

40~4

00Hz

AC V

oltag

e4.

000/

40.0

0/40

0.0/

600

V±(

1.2%

+5) f

or 3

12±(

1.5%

+5) f

or 3

1260

0V D

C/AC

rms.

±(1.

2%+8

) for

314

*±(

1.5%

+8) f

or 3

14*

DCCu

rrent

400.

0/40

00 µ

A; 4

0.00

/400

.0 m

A±(

1.2%

+5)

500m

A/25

0V F

ast F

use

4.00

0/10

.00

A±(

1.5%

+5)

10A/

250V

Fas

t Fus

e

ACCu

rrent

400.

0/40

00 µ

A; 4

0.00

/400

.0 m

A±(

1.5%

+5)

500m

A/25

0V F

ast F

use

(40~

400H

z)4.

000/

10.0

0 A

±(2.

0%+5

) 10

A/25

0V F

ast F

use

400.

0/4.

000k

/40.

00k/

400.

0k Ω

±(1.

0%+4

)

Resis

tance

4.00

0MΩ

±(1.

2%+4

)25

0V D

C/AC

rms.

40.0

0MΩ

±(1.

5%+5

)

Capa

citan

ce**

**40

.00n

F/40

0.0n

/4.0

00µ/

40.0

0µ/1

00.0

µF

±(3.

0%+5

) 25

0V D

C/AC

rms.

Freq

uenc

y10

.00/

100.

0/1.

000k

/100

.0k/

1.00

0M/1

0.00

M H

z±(

0.3%

+4)

250V

DC/

AC rm

s.Se

nsiti

vity:

1V rm

s ; 5

V rm

s (>

1MHz

)

Diod

e Ch

eck

Test

curre

nt :

0.6m

A an

d th

en o

pen

circu

it vo

ltage

is 1

.5VD

C typ

ical.

250V

DC/

AC rm

s.Co

ntin

uity

The

buzz

er s

ound

s wi

th le

ss th

an 3

0Ω.

Tem

pera

ture

***

-4~1

382°

F±(

1.0%

+4) @

-4~5

72°F

; ±(

3.0%

+5) @

573~

1382

°F—

-20~

750°

C±(

1.0%

+4) @

-20~

300°

C ; ±

(3.0

%+5

) @ 30

1~75

0°C

*CF<

2**

Accu

racy

not

ava

ilabl

e fo

r <10

nF c

apac

itanc

e.**

*Acc

urac

y is

stated

for m

eter o

nly.

The

rmoc

oupl

e ac

cura

cy a

dds

anot

her ±

2% to

read

ing.

Inpu

t Im

peda

nce

: 10

MΩ

for A

VC &

DCV

DC Voltage (V )

CAT II

MAX

Toggle for DC

99 Washington Street Melrose, MA 02176 Phone 781-665-1400Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Back to the Ideal 61-312 Product Info Page

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

AC/DC Current (A )

IDEAL INDUSTRIES, INC.Sycamore, IL 60178, U.S.A.877-201-9005 Technical Hotline www.idealindustries.comwww.testersandmeters.comND 6296-1 Made in China

Audible Continuity (•))))

SpecificationsGeneral FeaturesDisplay: 3999 Count LCDOver range: “OL” is displayed Polarity: Automatic (no indication for

positive polarity); Minus(-) sign for negative polarity

True-RMS: 61-314 only.Auto Power Off: After 15 minutes of non-useLow Battery: is displayed if battery voltage

drops below operating voltageAltitude: 6561.7 ft. (2000m)Accuracy: Stated accuracy at 73° ±41°F

(23° ±5°C), < 75% R.H.Batteries: 61-312 requires (2) 1.5V AAA

(IEC LR03)61-314 requires 9VDC NEDA 1604

Fuse: 500mA/250V (#F-312) 10A/250V (#F-314)

Operating 32° to 104°F (0° to 40°C) environment: at < 75% R.H.Storage -4° to 140°F (-20° to 60°C) environment: at < 80% R.H.Weight: 7.1 oz (200g)Size: 5.9"H x3.0"W x1.5"D

(150mmHx76mmWx38mmD)Accessories Test leads (TL-310), 9V batteryIncluded: for 61-314, (2) AAA for 61-312,

Operating InstructionsSafety Complies with UL 61010-1, Certification: UL61010-031, IEC EN61010-1,

EN 61010-031, Cat II-600V

Equipment protected by double insulation.

Instrument complies with overvoltage category II. Cat II equipment protected from transients in outlets and long branch equipment. Pollution degree2 in accordance with IEC-664. Indoor use.

C US N12966

MaintenanceClean the case with a damp cloth and mild deter-gent. Do not use abrasives or solvents.

Service and ReplacementPartsNo user-serviceable parts.

For replacement parts or to inquire about serviceinformation contact IDEAL INDUSTRIES, INC. at1-877-201-9005 or visit our website @www.testersandmeters.com.

Warranty StatementThis meter is warranted to the original purchaseragainst defects in material or workmanship for a 2-year period after purchase. During this warrantyperiod, IDEAL INDUSTRIES, INC. will, at its option,replace or repair the defective unit, subject to verifi-cation of the defect or malfunction.

This warranty does not apply to defects resultingfrom abuse, neglect, accident, unauthorized repair,alteration, or unreasonable use of the instrument.

Any implied warranties arising out of the sale of anIDEAL product, including but not limited to impliedwarranties of merchantability and fitness for a par-ticular purpose, are limited to the above. The man-ufacturer shall not be liable for loss of use of theinstrument or other incidental or consequentialdamages, expenses, or economic loss, or for anyclaim or claims for such damage, expenses, oreconomic loss.

State laws vary, so the above limitations or exclu-sions may not apply to you. This warranty givesyou specific legal rights, and you may also haveother rights which vary from state to state.

Warranty does not cover batteries.

CAT II

MAX

ClosedCircuit

OpenCircuit

CAT II

MAX

Capacitance

CAT II

MAX

Battery & Fuse Replacement

WARNING: To avoid electric shock, dis-connect test leads before removing battery cover.

WARNING: For continued protectionagainst fire, replace only with fuse of the specifiedvoltage, current and rupture speed ratings.

Turn power off, break circuit, insert meter inseries, then turn power back on.

WARNINGS: • Check fuse before testing.• Use the proper switch position and lead

inputs.• Never attempt to measure current on

circuits or equipment with more than 250 volts potential.

Bad Diode

Good Diode

Open Shorted

Foward Reverse

CAT II

MAX

Hz

CAT II

MAX

Diode Testing Frequency (Hz) Data Hold

�

MAX

+–

TemperatureWARNING: De-energize circuit before

taking resistance measurement.

WARNING: De-energize circuit before taking capacitance measurement.

WARNING: De-energize circuit first.

WARNING: De-energize circuit before checking diode.

WARNING: To avoid electric shock, donot place test leads or thermocouple on avoltage source.

CAT II

MAX

Resistance (Ω) ~

Toggle for DC

Toggle for Press to hold

present value in display; depress to

release display.

F-314: 10A/250V5mm x 20mm

(61-312 model)

(61-314 model)

F-312: 500mA/250V5mm x 20mm

Reverse

+

+

--

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com