range overlay master gunner course terminal learning objective action: construct a range overlay...
DESCRIPTION
Range Overlay MASTER GUNNER COURSE Steps to Finding land 1.Training area 2.Size of land for specific training 3.Usage and type of Ammunition and Pyro 4.Airspace 5.Interference with other training areas 6.Engineer assets 7.Impact area 8.Terrain analysis 9.Distance X 10.2 mils of Backstop for vehicles equipped with LRFTRANSCRIPT
Range OverlayMASTER GUNNER COURSE
TERMINAL LEARNING OBJECTIVE
ACTION: Construct a Range Overlay
CONDITIONS: Given 1:25,000, scaled map, straight edge, grid coordinate scale, map ruler, tracing paper, and mechanical pencil.
STANDARDS: The student must construct a Range OverlayBy plotting all Targets, Firing Positions and Left and Right Limits accurately to within 20 meters using 8 Digit grid Coordinates, within 75 minutes.
Range OverlayMASTER GUNNER COURSE
ENABLING LEARNING OBJECTIVE:1
ACTION: Find Land
CONDITION : In a classroom environment.
STANDARD: Students must recognize considerations to resource land.
Range OverlayMASTER GUNNER COURSE
Steps to Finding land
1. Training area
2. Size of land for specific training
3. Usage and type of Ammunition and Pyro
4. Airspace
5. Interference with other training areas
6. Engineer assets
7. Impact area
8. Terrain analysis
9. Distance X
10. 2 mils of Backstop for vehicles equipped with LRF
Range OverlayMASTER GUNNER COURSE
ENABLING LEARNING OBJECTIVE:2
ACTION: Terrain Analysis
CONDITIONS: In a classroom environment.
STANDARDS: The student will construct a Terrain analysis.
Range OverlayMASTER GUNNER COURSE
• SLIDE OF TERRAIN ANALYSIS
Range OverlayMASTER GUNNER COURSE
Terrain analysis
WHY DO ONE?
1. To view a piece of terrain from 2 known points as seen from the side.
2. To identify terrain changes to a relative scale
3. Aid in range development and safety investigations
4. Aid in proper target placement
Range OverlayMASTER GUNNER COURSE
ENABLING LEARNING OBJECTIVE:3
ACTION: Determine 15 Degree elevation of weapon system using terrain analysis
CONDITIONS: In a classroom environment, given a terrain analysis.
STANDARD: The student will determine 15 degree elevation of weapon systems.
Range OverlayMASTER GUNNER COURSE
Terrain analysis to determine elevation1. Identify the start and end point of your training facility.
2. Draw a straight line on the map.
3. Using graph paper, identify the major changes in contour level ie.. Hilltops, ridges and low ground.
4. Connect the dots.
5. Shade in the high and low elevation areas.
Range OverlayMASTER GUNNER COURSE
9
Firing Vehicle
Target
Range to Impact: approx. 6200m
Error Angle Deflection: 0 degrees
10x Magnification View: 6.5 degrees
Not to Scale
Gun / Target Line
Gun / Impact Line
Step #1 – ID
Range OverlayMASTER GUNNER COURSE
10
Firing Vehicle
Target
Range to Impact: approx. 6200m
Range to Target: 1370m
Error Angle Deflection: 0 degrees
10x Magnification View: 6.5 degrees
Not to Scale
Round Out of Impact (ROI) #1, M865IP,
TPCSDS-T – CIR Data
Step #2 – Plot the Contours
0m500m 1000m 1500m 2000m 2500m 3000m 3500m 4000m 4500m 5000m 5500m 6000m 6500m
7000m
6 0 0 m
5 8 0 m
7 0 0 m
8 0 0 m
8 4 0 m
Range OverlayMASTER GUNNER COURSE
11
Step #3 – Connect the Dots
0m 500m
1000
m
1500
m
2000
m
2500
m
3000
m
3500
m
4000
m
4500
m
5000
m
5500
m
6000
m
6500
m
7000
m
600m
580m
700m
800m
840m
Range OverlayMASTER GUNNER COURSE
Determine 15 degree elevation of weapon system using graph paper.
1. Using your graph paper- determine target placement due to safety considerations
As well as
a. If Target exceeds 15 degrees
b. Proper backstop for projectiles
c. Proper backstop for LRF
d. Identify impact area
Range OverlayMASTER GUNNER COURSE
ENABLING LEARNING OBJECTIVE:4
ACTION: Determine 2 mils of backstop
CONDITION: In a classroom environment.
Standards: The student must gain the knowledge of how to obtain 2 mils of backstop.
Range OverlayMASTER GUNNER COURSE
Determine 2 mils of backstop for vehicles with LRF.
1. Backstop is used for an accurate return from the Laser Range Finder.
2. It is also used for SAFETY!!!!
3. M1 Tanks do not have Eye safe capability and this is another consideration that must be addressed.
4. To ensure that the Backstop is 2 mils- You can use the FT 25-A-2, or use the Bradley reticle to check this.
5. Put the Bradley into EACH BP intended for firing and check EACH target.
Range OverlayMASTER GUNNER COURSE
ENABLING LEARNING OBJECTIVE:5
ACTION: Construct a Range Overlay
CONDITIONS: In a classroom environment, given a straight edge, grid coordinate scale, map, ruler, tracing paper, bar compass, and two #2 pencils.
STANDARDS: Within 75 minutes construct a range. All targets, firing positions, left and right limits must be plotted accurately within 20 meters.
Range OverlayMASTER GUNNER COURSE
96
04
37
86
LL
RL
MV 1MV 2
MV 3
T 1
T 2
T 3 I O5
I 06
I O7
BLFP 4FP 1
FP 2
FP 3FP 5 FP 6
Range OverlayMASTER GUNNER COURSE
96
04
GRID REGISTRATION MARKS
37
86
LEFT LIMIT
LL
RL
RIGHT LIMIT
Range OverlayMASTER GUNNER COURSE
FIRING POINT
STATIONARY (FP)
BASELINE (BL)
MANEUVER BOX (FP)
Range OverlayMASTER GUNNER COURSE
VEHICLE TARGETS
TARGET CENTER
160 METERS
40 METERS
GRID LINE
45 DEGREES
T 4 T 4
Range OverlayMASTER GUNNER COURSE
VEHICLE TARGET RULESOF CANTING
• Rule 1: If the plotted position is within 80 meters of a grid line (on a scale of 1:25,000)
• Rule 2: If the tick mark that is to be constructed interferes with a previously constructed tick mark, the new tick mark should be canted 45 degrees (800 mils) counter clockwise to avoid confusion.
Range OverlayMASTER GUNNER COURSE
VEHICLE TARGET RULESOF CANTING
EXAMPLE 1: Rule 1
80 83828179 84
10
11
T2T1
Range OverlayMASTER GUNNER COURSE
VEHICLE TARGET RULESOF CANTING
EXAMPLE 2: Rule 2
80 83828179 84
10
11
T1T2
Range OverlayMASTER GUNNER COURSE
VEHICLE TARGET RULESOF CANTING
EXAMPLE 3: Rule 1 over-rides Rule 2 (this is the only instance when tick marks bisect perpendicular)
80 83828179 84
10
11
T2T1
Range OverlayMASTER GUNNER COURSE
MOVING TARGETS
100 METERS
100 METERS
100 METERS
MV 1
MV 1
MV 1
Range OverlayMASTER GUNNER COURSE
160 METERS
40 METERSTARGET CENTER
I 105
RPG TEAM
160 METERS
40 METERSTARGET CENTER
I 106
AREA TARGET
TROOP TARGETS
100METERS
Range OverlayMASTER GUNNER COURSE
96
04
37
86
LL
RL
MV 1MV 2
MV 3
T 1
T 2
T 3 I 105
I 106
I 1O7
BLFP 4FP 1
FP 2
FP 3FP 5 FP 6
IO. I 1/1 INF 10AD (MeIh)RANGE 111 (GTA)1 JAN 99 THRU 31 DEI 99POI: SSG BLOW DIV MGPHONE: 555-1010
Range OverlayMASTER GUNNER COURSE
TERMINAL LEARNING OBJECTIVE
ACTION: Construct a Range Overlay
CONDITIONS: Given 1:25,000, scaled map, straight edge, grid coordinate scale, map ruler, tracing paper, and mechanical pencil.
STANDARDS: The student must construct a Range OverlayBy plotting all Targets, Firing Positions and Left and Right Limits accurately to within 20 meters using 8 Digit grid Coordinates, within 75 minutes.