raised access floors - butech...this allows, in addition obtaining an excellent barrier against fire...

1

Raised access floorsRaised access floorstechnical solutions

32

The contents of this catalog are protected by Intellectual Property Law, Royal Decree 1 / 1996. Any reproduction of it, in whole or in part, without the consent of Porelanosa Grupo is liable under the Penal Code.

54

66 8 12162834

3940404042

45464748

5050505253

55

IndexRaised access flooringSystem application areas Panels with chipboard corePanels with calcium sulfate coreStructure Sound proofing properites of RAFInstallation of RAF

Raised access flooring for exteriorsOutdoor tiles to RAF for exteriorsStructure to RAF for exteriorsPlots propertiesInstallations of RAF for exteriors

Cli-ker nAdvantagesComponentsInstallation

Cli-ker n exteriorAdvantagesFeaturesComponentsInstallation

How to get a budget of a butech system?

76

System application areasFacilities with a high volume of services or in rooms that house technical equipment that requires special ventilation.Commercial applications: offices, libraries, museums, schools, shopping centres, etc.Technical applications: telecommunications/electricity plants, control rooms, laboratories, data centres, etc.

Advantages

• Ability to hide away all types of ugly and dangerous cables, pipes etc under the floor.• Improved installation efficiency in comparison to conventional floors (installation rate of about 40 m2/day).• Easy to take with you when relocating offices.• Option of rerouting services following installation of floor.

Advantages over other raised access floor systems

• Able to withstand a high mechanical load.• The potential for combining different structures, as required in each particular case.• A high resistance to fire under laboratory tests.• Very low dimensional tolerances, between +0,1 and -0,2 mm. This means that the panels can easily be interchanged.• Cores made of high-performance materials with very high densities.• Compliance with UNE EN ISO 9001, guaranteeing quality controls during each stage of the manufacturing process.• On the top surface, any 60 x 60 ceramic tile by Porcelanosa or other non-ceramic coverings (plastic laminate, linoleum, vinyl, granite, aluminium, steel, carpet, parquet etc)

can be used.• Tiles protected by a plastic surround to prevent the edges from breaking.• A wide range of complementary products to ensure a good finish.

Raised access flooringRaised access flooring (RAF) was created in response to the need to hide large volumes of cables, pipework, tubing, etc. that are typically found in offices, technical rooms, and other locations. The installation of a raised floor creates a space under the floor where all these services, including equipment and room cooling systems, can be neatly housed and hidden away.

98

Panels with chipboard core They are made of chipboard with a high-performance resin binder. Available in a thickness of 38mm, they feature an aluminum, galvanized steel or plastic lower covering, thus offering slightly different properties to suit each individual case.The panels have a plastic surround to prevent the edges from breaking.

Panel 38M1Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder.

Lower coating 38M1A:With aluminum sheet of thickness of 0.15 or 0.05 mm to create an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.

Inside coating 38M1F:To increase the flexural stiffness and the total mechanical resistance, the panel comes with a galvanized steel sheet of thickness of 0.05 mm on the inside. This allows, in addition obtaining an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.

The perimeter is beaded with anti-crunching plastic material with a thickness of 1 mm of ABS to upper ceramic coating with a thickness of 0.45 mm of ABS to the rest of upper coatings.

Covering piece

Lower covering

EdgingEdgi

ng

Wood panel

Physical features (not including coating material):

Standard Test U.M. Tolerance

Nominal size mm -0.1 +0.2 598 x 598600 x 600

Thickness mm -0.1 +0.2 38

Diagonal difference mm Máx. ≤0.4

Slope ºC ±15` 3º

Density Kg/m3 ±5% 720

Weight Kg ±5% 9.8

Transverse electrical resistance EN 1081 Ω Máx. ≤1010

38M1A 38M1F

Fire Resistance EN 13501-2 Clase Bfl Clase Bfl

Fire Reaction EN 13501-1 30 30

Upper coating

A = Aluminum Sheet

F = Galvanized steel sheet

L = Plastic Laminate

V =Vinyl

D = Linoleum

G = Rubber

C = Carpet

P = Parquet

T = Ceramic

R = Stone recomposed

S = Natural Granite

Table – Technical Properties 38M1A 38M1F

Test standard – EN 12825 Type of stringers Type of stringers

U.M. SIN L M P SIN L M P

Coverage: A V D G C

Concentrated load centre of side of the panel (2.5 mm deflection) kN 1.7 1.7 2.4 2.8 2.3 2.3 2.8 3.1

Maximum allowed load centre of side of the panel kN 4.6 4.6 4.8 4.9 6.4 6.4 6.5 6.6

Concentrated load at the center of the panel (2.5 mm deflection) kN 2.7 2.7 3.4 3.8 4.0 4.0 4.6 5.1

Maximum load allowed in the center of the panel kN 6.7 6.7 6.9 7.0 7.6 7.6 7.7 7.8

Uniformly distributed load kN/m2 14.0 14.0 18.0 22.0 21.0 21.0 25.0 30.0

Class according to EN 12825 4 4 4 4 6 6 6 6

Coverage: F L







Coverage: T R S







Note: the breaking load is obtained by multiplying by 2 the maximum load allowed.

Mechanical features

1110

Panel 38M2Panel consisting of a chipboard core with a thickness 38 mm with a high-performance resin binder.

Lower coating 38M2a:With aluminum sheet of thickness of 0.15 or 0.05 mm to create an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.

Lower coating 38M2F:To increase the flexural stiffness and the mechanical resistance, it is applied in the panel a sheet of galvanized steel of thickness 0.5 mm on the lower side. This allows, in addition obtaining an excellent barrier against fire and moisture, to form an equipotential frame to maintain electrical continuity features of the floor.




Mechanical features:





Slope ºC ±15` 3º

Density Kg/m3 ±5% 650

Weight Kg ±5% 8.9

Transverse electrical resistance EN 1081 Ω Max. ≤1010

38M2A 38M2F



Upper coati

A = Aluminum Sheet



V =Vinyl

D = Linoleum

G = Rubber

C = Carpet

P = Parquet

T = Ceramic


S = Natural Granite

Table – Technical Properties 38M2A 38M2F



Coverage: A V D G C







Coverage: F L







Coverage: T R S






Class according to EN 12825 - - - - 2 2 2 2

1312

Panels with calcium sulfate coreIt consists of a mineral soul of a single layer based on calcium sulfate of high density. It can be found in thicknesses of 15, 29 and 34 mm and with lower coating of aluminum or galvanized steel. As in the wood panels, the perimeter of all the panels has a plastic surround to prevent the edges from breaking.

Upper coating

Lower coating

Perimeter protectionPe

rimet

er pr

otec

tion

Calcium sulphate core

Panel 30SIt is formed by a core of mineral of a single layer based of calcium sulfate, high-density 30 mm thickness, with a high-performance resin binder and completely free of wood particles.

Lower coating 30SA:With aluminum sheet of thickness of 0.15 or 0.05 mm to create an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.

Lower coating 30SF:To increase the flexural stiffness and the total mechanical resistance, the panel comes with a galvanized steel sheet of thickness of 0.5 mm on the inside. This allows, in addition obtaining an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.







Slope ºC ±15` 3º

Density Kg/m3 ±5% ≥1.500

Weight Kg ±5% 16.2

Transverse electrical resistance EN 1081 Ω Max. ≥107

30SA 30SF



Upper coati

A = Aluminum Sheet



V =Vinyl

D = Linoleum

G = Rubber

C = Carpet

P = Parquet

T = Ceramic


S = Natural Granite



Table – Technical Properties 30SA 30SF



Coverage: A V D G C







Coverage: F L







Coverage: T R S







1514

Panel 15KConsisting of mineral support material with a layer of inert nominal thickness 12.5 mm. Upper coating consisting of whole stone of natural stone materials (marble or granite), nominal thickness of 20 mm, rectifying, polishing and chamfering. The elaboration of the panel includes the rectification of precision to ensure the dimensional tolerances in both the perimeter and the thickness of the panel, to ensure a perfect modularity.

Lower coating 15kf:To increase the flexural stiffness and the total mechanical resistance, the panel comes with a galvanized steel sheet of thickness of 0.5 mm on the inside. This allows, in addition obtaining an excellent barrier against fire and moisture, while forming an equipotential frame to maintain electrical continuity features of the floor.

The perimeter is beaded with anti-crunching plastic material with a thickness of 1 mm of ABS to upper ceramic coating with a thickness of 0.45 mm of PVC to the rest of upper coatings.



Nominal size mm -0.1 +0.2 594 x 594

Thickness mm -0.1 +0.2 12.5


Slope ºC ±15` 4º

Density Kg/m3 ±5% ≥1.100

Weight Kg ±5% 4.8

Transverse electrical resistance EN 1081 Ω Máx. ≥107

15KF

Fire Resistance EN 13501-2 Clase Bfl

Fire Reaction EN 13501-1 30

Upper coati

S = Natural Granite


Table – Technical Properties 15KF

Test standard – EN 12825 Type of stringers

U.M. SIN L M P

Coverage: S

Concentrated load centre of side of the panel (2.5 mm deflection) kN 1.4 1.4 1.6 1.8

Maximum allowed load centre of side of the panel kN 4.1 4.1 4.2 4.3

Concentrated load at the center of the panel (2.5 mm deflection) kN 2.4 2.4 2.6 2.9

Maximum load allowed in the center of the panel kN 4.9 4.9 5.0 5.1

Uniformly distributed load kN/m2 12.0 12.0 14.0 17.0

Class according to EN 12825 3 3 3 3


1716

Pedestals

100% galvanised steel structure. This pedestals dictate the floor height according to the project requirements. Each pedestal incorporates a series of plastic noise-reduction heads fitted with four positioning lugs. One of the main advantages of the pedestal system is that it is fitted with a 14 mm threa-ded bolt that can be adjusted to accommodate different floor height requirements.

Stringers

Like the pedestals, the stringers are made entirely of galvanised steel. Their main function is to increase the strength of the floor. They are covered with special noise-reduction strips.

StructureThe structure is made up of pedestals and stringers, which support the floor covering and ensure the necessary height and rigidness.

The nominal heights and the way of the pedestals have been selected for greater overlap between two successive pedestals using a long screwed bolt. Because of this, it has obtained a greater range of height adjustment for each type of pedestal (nominal - / +50 mm) with the ability to better adapt to the unevenness of the floor, without resorting constantly to systematic measurements.

From the point of view of performance, it presents a high resistance to bending vertical load and / or eccentric, thanks to a screwed bolt M16 section, a tube of diameter 20 mm of thickness of 2 mm, internally calibrated to obtain a coupling with smaller tolerances and therefore less spaces and a direct connection between the screwed bolt of the disc base and tube, without need of interposing deformable plastic elements.

To ensure electrical continuity of the pedestal, the base disc has been drilled to accommodate the screw and nut for electrical connection. In the disc of base have been added 4 holes of 8,5 mm and 3 holes of 6,5 mm, at the height of the radial nerves, to enable and facilitate the injection of fluid adhesive on the back of the base when the pedestal is already installed.

When necessary, and with a simple intervention without special tools, the structure offers the possibility to adjust the height of the pedestal shortening the tube if necessary.

>100 mm

<100 mm

The pedestal is available in two versions:

• Version with screw-in fitting for reduced height (nominal values of 55.70 and 85 • Version with tube for higher heights (from 100 mm nominal).

In both versions, the pedestal is made entirely of galvanized steel (minimum thickness of 3μ, white color) on all surfaces (both visible as not) and including the cut parts by galvani-zing bath based of ions Cr3 + electro deposited.

Model (nominal height) 055 070 085 100 130 150 190 220 ÷ 620

Versions with screw-in fitting with tube

Nominal height mm 55 70 85 100 130 150 190from 220 to 620 mm

with 40 mm step

Nominal range of height adjustment mm ± 10 ± 15-15

+20± 20 ± 30

-30+35

± 40 ± 50

Permissible axial load with safety factor 2 (ref. UNE EN 12825)(*) kN 40 30 25 22 21 20.5 20 20

(*): The allowable axial load is given to the first deformation. The breaking load or collapse load is obtained by multiplying the permissible axial safety factor equal to 2.

Pedestals

Screw-in fitting version Tube version

1918

PSA pedestalsIt is supplied in a unique version with adjustment under the head to cover a range of nominal heights of finished pavement of a minimum of 110 mm up to 500 mm.

The nominal height of the finished pavement is achieved by adding the thickness of the panel to the nominal height of the pedestal. The pedestal is made completely of steel with galva-nized superficial treatment of minimum thickness of 3μ by galvanizing bath based on chromium ions electro deposited, applied to all surfaces. The pedestal consists of two main elements: the head riveted to the screwed bolt and base disc riveted to the tube.

The pedestals are supplied with joints to the head, semi-rigid plastic printing, black, conductor, carrying an anti vibration function of air sealing and centering of the panel.

It recognizes that the raised technical floor has obtained the certification PSA Medium Grade with the following settings: • 35SF panel• Structure with pedestal of nominal height of 410 mm, set at a maximum height of 450 mm, and stringers of type “P”.

Therefore, for heights higher to 450 mm and with panels or other structures, the obtained certification is not applicable.

Overview of the pedestal

The following is an overview of the pedestal above mentioned.

(*): The allowable axial load is given to the first deformation. The breaking load or collapse load is obtained by multiplying the permissible axial safety factor equal to 2.

Model (nominal height) 75 95 130 170 200 260 310 360 410

Versions With adjustment under the head

Nominal height mm 75 95 130 170 200 260 310 360 410

Nominal range of height adjustment mm ±15 ±15 ±30 ±30 ±30 ±40 ±40 ±40 ±40

Permissible axial load with safety factor 2 (ref. UNE EN 12825)(*) kN 70 70 70 68 65 60 48 35 26

2120

B80305602 PEDESTAL H = 55 MM (-10/+10) 100091646

B80305609 PEDESTAL H = 70 MM (-15/+15) 100091649

B80305605 PEDESTAL H = 85 MM (-15/+20) 100091650

B80305614 PEDESTAL H = 100 MM (-20/+20) 100091624

B80305606 PEDESTAL H = 130 MM (-30/+30) 100091625

B80305589 PEDESTAL H = 150 MM (-30/+35) 100091079

B80305612 PEDESTAL H = 190 MM (-40/+40) 100091626

B80305599 PEDESTAL H = 220 MM (-50/+50) 100091627

B80305608 PEDESTAL H = 260 MM (-50/+50) 100091628

B80305601 PEDESTAL H = 300 MM (-50/+50) 100091629

B80305600 PEDESTAL H = 340 MM (-50/+50) 100091640

B80305615 PEDESTAL H = 380 MM (-50/+50) 100091641

B80305604 PEDESTAL H = 420 MM (-50/+50) 100091642

B80305607 PEDESTAL H = 460 MM (-50/+50) 100091643

B80305598 PEDESTAL H = 500 MM (-50/+50) 100091644

B80305603 PEDESTAL H = 540 MM (-50/+50) 100091645

B80305613 PEDESTAL H = 580 MM (-50/+50) 100091647

B80305616 PEDESTAL H = 620 MM (-50/+50) 100091648

B80305584 PEDESTAL H = 75 MM (-15/+15) PSA 100090839

B80305374 PEDESTAL H = 95 MM (-15/+15) PSA 100084397

B80305266 PEDESTAL H = 120MM (-30/+30) PSA 100072166





B80305351 PEDESTAL H = 420MM (+50/-50) PSA 100082735

B80305352 PEDESTAL H = 460MM (+50/-50) PSA 100082736

ReferencesKEA Description SAP KEA Description SAP

B80305238 junta de pedestal 4r. PSA 100072188

B80305236 junta de pedestal 8r. PSA 100071935

B80305590 junta de pedestal 100091081

Joints to head of PSA pedestalSemi-rigid plastic stamped in black, conductive electrical resistance R <104 Ω, is shaped and fitted with 4 teeth on the lower surface for better accommodation self-centered in the head and 4 teeth of knife on the upper surface for positioning and centering the panels. The number of rays (4 or 8) depends on the chosen configuration. The special shape and variable thic-kness (from 2 mm at least at the ends of each radio) are perfectly adapted to the head of the pedestal to ensure greater comfort underfoot. The joint also plays an anti vibration function.

Joints to head of pedestalJunta para la cabeza del pedestal, de plástico semirrígido estampado, no conductora (resistencia eléctrica R>1010 Ohm) de color negro opaco, espesor nominal 2,5mm, y de forma cua-drada con ángulos redondeados. Cada ángulo está provisto de un diente de agarre para centrar y enganchar al cabezal de la base de sujeción. En la parte superior, está provista de cuatro dientes para el posicionamiento y el centrado de los paneles. La junta actúa también atenuando los ruidos. Su peso nominal es 5 gr.

Type of stringer: S.Type of joint: 8 radios.Section thickness (pz/m2): 3.3

Joint for head without stringers

Type of stringer: L, M y P.Type of joint: 4 radios.Section thickness (pz/m2): 3.3

Joint for head with stringers L, M and P

References

KEA Description SAP

2322

B80305592 tornillos para travesaños l/m/p 100091083

B80305617 travesaño ligero 598x598 100091655

B80305618 travesaño medio 598x598 100091659

B80305232 travesaño pesado 598X598 100071899

butech can supply two different types of stringers:

• Basic stringer of orthogonal direction connection (versions “L”, “M” or “P”); • Additional stringers of diagonal direction connection (versions “D” or “X”).

All stringers are produced by cold stamping galvanized steel sheet (minimum thickness of 3μ), with special profile and are designed to improve mechanical endurance and ensure reduced to-lerances of modules and the ease of exchange them. Its blockage in the radios by auto-tapping metric screws ensures the electric continuity of the system and gives a great stability to the structure.

Stringers version “L” (light)

Lightweight Stringer (“L”) has been obtained by means of stamping cold from galvanized steel sheet (material Dx51D + Z 150 according to EN 10142 with minimum thickness 15 μ hot dip galvanizing). They are opened section (30 mm width, 21mm height, 0.8 mm thick) and 220 gr. weight. The stringer is equipped at both ends with the “snap-on” system, a system of special hook that allows optimum and fast placement on the radii of the head of the pedestals, that ensures electrical continuity of the system.

Stringers version “M” (medium)

Medium Stringer (“M”) has been obtained by means of stamping cold from galvanized steel sheet (material: Dx51D + Z 150 according to EN 10142 with minimum thickness 15 μ hot dip galvanizing). They are opened section (30 mm wide and 38 mm height, 0.8 mm thick), and 390 gr. weight. It has longitudinal nerves, present also in the vertical sides and the laps of the bottom side, to increase benefits with respect to bending, in comparison with the previous type “L”, and improve the way to control the deformations. In addition to the hole for the ground connection, the ends are equipped with the system of special hook “snap-on” that allows optimum and fast placement on the radii of the head of the pedestals for the lock with screw, ensuring in that way, electrical continuity of the system.

Stringers version “P”. Heavy.

Heavy Stringer (“P”) has obtained a special profiling of galvanised steel which increases its performance with respect to the “L” and “M” models (material: Dx51D + Z150 according to EN 10142 with minimum thickness 15μ hot dip galvanizing). They are closed section (30 mm wide, 30 mm high and 1 mm thick) and 600 gr. weight. The ends are fitted with a system of special hook that allows optimum and fast placement on the radii of the head of the pedestals. The stringer is equipped with a hole for the ground connection.

Stringers of diagonal connection (version “D” or “X”)

All the stringers are supplied with special joints of black extruded plastic with anti vibration function and air tightness. They do not have sharp edges, especially dangerous during handling and assembly, which may damage the plastic covering to pass underneath.

The screws, made of galvanized steel, are used to connect the STRINGER at the head of the pedestal to give greater security and stiffness to the system stiffness.

Stringers

Stringer section L 30x21x0,8 mm

Length VARIABLE

Unit Weight 220 gr.

Nominal amount 5,7 pz/m2

Nominal amount screws 11,4 pz/m2

Stringer section M 30x38x0,8 mm

Length VARIABLE

Unit Weight 390 gr



Stringer section P 30x30x1 mm

Length VARIABLE

Unit Weight 580 gr



Stringer section D 20x40x1 mm

Length 792 mm

Unit Weight 0,73 Kg



Stringer section X 20x40x1 mm

Length 368 mm

Unit Weight 0,34 Kg



References Screws for stringers L/M/P types of structure

KEA Description SAP

2524

B80305234 junta de travesaños PSA 100071897

B80305591 junta de travesaños l/m/p 100091082

Joint for stringersExtruded black plastic, thickness of 1 mm, non-conductive, anti vibration function and air tightness. The joint is applied in the stringer with a simple hand pressure.

Joint for stringers type L, M and P

Types of structureThe structure offers several configuration options that can be performed using both orthogonal and diagonal stringers, increasing the mechanical stability and capacity of the pavement. Such stringers are used light, medium and heavy which are placed in the radii of the head of the pedestals. The diagonal stringer D or X (stringers shape) can be used with any orthogonal stringer (L, M or P).

Section dimensions 30x8 mm

Nominal length 546 mm


Type D




Type X




Joint for stringers type X and D

References

KEA Description SAP

Configuration Configuration perimeter zones

Type S Without stringersRange 55 ÷ 620 mm.

Type L Light stringers.Range 55 ÷ 620 mm.

Type M Medium stringers.Range 55 ÷ 620 mm.

Type P Heavy stringers.Range 55 ÷ 620 mm.

2928

Sound proofing properites of RAFA room’s soundproofing capacity depends on the soundproofing properties of each of its components, including the floor.

The factors that influence a RAF’s soundproofing capacity are the material that the top covering is made of, the material of the core and its density, and the height of the plenum.

butech’s RAFs are made of ideal soundproofing materials with the right densities to guarantee the best soundproof protection, with cores with a density of up to 1.500 kg/m3.

To ensure maximum comfort and good soundproof protection, butech conducts rigorous soundproofing tests of its floors, in accordance with DIN 52210. This standard analyses four different cases: protection against airborne noise, impact noise, horizontal airborne noise and vertical airborne noise.

The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those without coating (those listed in the first table).

Horizontal transmission of noiseIn the data presented are the steps taken in a real building in accordance with current regulations (EN ISO 140-12), to assess the effect of reduction of the floor of modular access in relation to the horizontal transmission of aerial noise ( or how a person on a floor of a building perceives the ambient noise present in an adjacent floor). In this case, measures are taken with a modular access floor already installed. The noise pressure levels are taken in the two adjacent floors and the horizontal aerial noise attenuation expressed by the norm of the parameter Dnfw, measured in dB (decibels). The higher the value the greater the reduction in relation to the object to be tested and therefore the greater the reduction in aerial noise transmission from one floor to the adjacent.

The following data were collected from the panels:

The first diagram shows the values of Dnfw obtained in different structural configurations panels 38M1A and 35SA. The observed conditions differed depending on whether there were stringers or not, if there was a noise insulation sheet placed between the substrate and the tile, and if it was adhered or not (it is required to paste the pieces that have been installed without stringers). On the other hand, it was also considered installing an acoustic partition under the floor.

NOTE: The height of the supports was 300 mm for all configurations.

Attenuation of horizontal aerial noise (Dnfw) depending on access floor configuration

42

40

38

36

34

32

30

28

26

24

34 3434 29 3736 3636 29 38

Structure without stringers Structure with stringersStructure P with acoustic insu-

lation sheet without stickStructure P with acoustic in-

sulation sheet stuckThe same as previous situation + acoustic partition under

the floor

Type of coating Correction factor [dB]

Vinyl (V), rubber (G), linoleum (D) 1

Laminate (L), Steel (F) -1

Natural stone (S) and reconstructed (R), Gres (T) -1

Parquet (P) 0

3130

The correction factors in dB, which are necessary to obtain the corresponding data for 38M2A panels (of 38M1A) and 30SA (of 35SA) are shown in the table below.


Calcium sulfate 30S -1

Chipboard 38M2 0

Natural stone (S) and reconstructed (R), Ceramic tile (T) -1

Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum.


Steel (F) 0

Vertical transmission of noise In the presented data are the steps taken in a real building in accordance with current regulations (EN ISO 140-8), to evaluate the effect of reducing the modular access floor in relation to the transmission of noise surface of the panel (or how a person in a . floor of a building perceives the noise present in an upper floor). In this case, mea-sures are taken first without the modular access floor in order to determine the features of the building itself. The same measures are taken then with the modular access floor already installed. The measurements are recorded for the description of the differences of the effect of the added element (modular access floor). We present the test results of impact noise reduction panel expressed by the parameter ALW measured in dB. The higher the value the greater the reduction in relation to the object to be tested and therefore the greater the reduction in the transmission of noise when walking on the floor that is transmitted to the lower floor.

The following data were collected from the panels: The first diagram shows ALw values obtained in different structural configurations, and panels 38M1A and 35SA. The observed conditions differed depending on whether there were stringers or not, if there was a noise insu-lation sheet placed between the support and the tile and if it was stuck or not (required to stick the pieces have been installed without stringers).

NOTE: The height of the supports was 300 mm for all configurations.

Vertical impact noise attenuation (ΔLw) depending on the configuration of the access floor

3436

36

34

32

30

28

26

24

22

20

18

16

34 3421 23 2521 23 25 28 28

The table below allows obtaining the dB correction factors, which need to be added or removed for panels with multiple covers, starting with those without coating (those listed in the first table).


Vinyl (V), rubber (G), linoleum (D) 2

Laminate (L), Steel (F) 1

Natural stone (S) and reconstructed (R), Gres (T) -2

Parquet (P) 1

Structure without stringers Structure with stringersStructure P with acoustic insu-

lation sheet without stickStructure P with acoustic in-

sulation sheet stuckThe same as previous situation + acoustic partition under

the floor

3332

The correction factors in dB, which are necessary to obtain the corresponding data for 38M1A panels and 30SA are shown in the table below.

Type of coating Factor [dB]

Calcium sulfate 30S -2

Chipboarda 38M1 -1

Finally, the correction factors in dB are shown below for obtaining panel data with a lower cover in steel instead of aluminum.

Type of coating Factor [dB]

Steel (F) -1

Installation of RAFGeneral information

The first stage of the installation begins with the definition of the two initial orthogonal axes, previously agreed with the Director of Operations and / or verifiable tracings or drawings.The operation is carried out by attaching to the walls, a pair of orthogonally twisted nylon threads, at a height slightly higher than the system where it will be installed. To determine the angle (90 °) of the two threads use the Pythagoras Theorem or simply 3-4-5 formula: starting at the crossing of the two threads, that delimits 3 m. in one and 4 m. in the other. The diagonal between the 2 points should be 5m. (The larger the diagonal, the smaller the margin of error).

Installing a structure without stringers

The four pedestals must be completed with joints and already be leveled according to the altitude. Place the first panel so that one corner is perfectly placed at the point where the threads cross (the position in terms of height can be obtained using a bubble level or laser level.

Note: before placing the pedestals, apply glue to the base to ensure that the pedestals are fixed firmly to the floor.

Continue installing the other pedestals; fill them with joints, and its related panels, aligning with one of the two threads of reference. Always check that the panels are installed at the correct height and that the glue covers the base to ensure that the entire base is firmly fixed.

Continue placing the parallel rows of panels, using the same method described above, until all the inside panels have been installed. Be particularly careful about making sure the panels are at right angles, lined and flat.

To ensure that all panels form a smooth surface, it is important not to disturb the floor during installation and for a minimum of 24 hours after the glue has been applied, the minimum time required for fixing the glue properly.

NOTE: All supports must have joints.

Installing the stringers structure

Starting at the points where the two octagonal threads cross and aligning with them, install and screw in the different components of the structure, pedestals, stringers and screws.

Place the first wood panel so that one corner is perfectly placed at the point where the threads are crossed, then set the second panel being careful to align with the reference panel.

Continue placing panels in parallel with nylon threads until all panels have been placed, ensuring that all panels are at right angles, lined and flat.

All pedestals and stringers must have joints.

When Installing floor over 500 mm. of high it is advisable to fix pedestals to concrete slab with glue (taking care not to disturb the floor at least 24 hours after being applied).

Installation in perimeter zone

With structures of stringers, cut the stringers of perimeter to the required measure, fixing them with the proper screws and adjusting to the required height pedestals (the hole at the end of the stringers-cutting can be done directly with fixing screws). Cover the stringers and pedestals with joints which have been cut to size.

Finish the floor cutting all the panels to the correct perimeter at correct measure, making sure that follow the shape of the wall perfectly. One of the simplest ways to do this is by placing the panel that needs to be cut next to the row adjacent to the perimeter, using a separator ribbon panel, pass through the wall, supporting a pencil in the separator so that the exact part to be cut can be marked.

When so requested, it is possible to apply a layer of varnish to act as anti-dust protection on the sides of the molded panels.

3534

Installation designSuggested procedure

Bolting the design dimensions is possible to draw a grid floor installation.

• The grid is drawn according to strict procedures with regard to customer requirements that are stipulated in the contract for the installation (for example with a 45o installation, or according to a principal axis, or a project reference, etc. .).

• If no such indications, the grid should be positioned by calculating the minimum possible waste and avoiding small perimeter panel sections, setting initial two orthogonal axes. • To place them correctly, you should cut all perimeter panels. D • Avoid adjust complete panels to the perimeter walls if the walls are not perfectly linear, and therefore do not offer enough support or assurances that the panels are aligned pro-

perly. When possible, avoid close perimeters with panels less than 150 mm size, because they are less stable. • This procedure of graphic design can be carried by placing a sheet of paper with a squared tracing to the same scale on a map of the area or, alternatively, using a computer program

design. This procedure is extremely important to install the panels properly as it allows the necessary amount of material is determined and shown to planners and installers the position of the pedestals and, thus, where the systems themselves fit.

• To make the system easier to fit, it is also possible to trace the design of the floor in advance and thus mark the position of the pedestals with paint color. • This procedure can be carried out in different ways, but always in multiples of 600 mm. • It is often advisable to trace the surface with a suitable anti-dust varnish, usually vinyl or polyurethane. This serves to fix the concrete surface of the slab and prevent accumulation of

dust. This varnish is essential when the floor is to be used for air conditioning. This varnish is essential when the subfloor is to be used for air conditioning. To ensure that the concrete slab is painted correctly, it must be thoroughly cleaned. After its application is advisable to let the varnish dry for a day at least. The procedure of varnishing will be faster and more efficient if done before the installation system is installed. It is necessary to ensure that the anti-dust varnish is compatible with the adhesive used to attach the supports. Any dirt or dust appeared of the work in the floor can be removed using a vacuum cleaner.

Assembly sequenceWorking procedure

1. The correct assembly sequence is: 2. Check the status of progress of the construction site. 3. Check the installation’s design follows the lines of the tracing. 4. Install high technical floor.

During the installation procedure is necessary: • Decide the best assembly sequence for any interior wall or false ceiling. • Limit access to the area. If adhesives are used for fixing the panels to the structure, the panels should not be stepped on at least 48 hours after the placement has been completed. • Maintaining access to the building site and the building where the floor is being installed free of obstacles, so that materials can be unloaded near the place or lifting equipment. • Maintain the horizontal access to the area and free obstacle lifting devices to facilitate transportation between pallets. • Ensure clear routes for trucks of pallets to transport materials for the zone can be efficiently carried out. • Stipulate by contract the features and use of lifting devices for vertical transport. • The raised technical floor should be formally approved as soon as it has been installed in each individual environment, before any protection and coating are applied and in any case

before any other operation by the employees of the installation.

3736

General site conditionsGeneral information

The in-situ inspection allows that the general conditions of the place, the dimensions of the installation area, floor level, and / or correspondence from the planimetry

To gather any additional information and useful details for proper installation, in-situ inspection must be performed by authorized personnel from the workplace, including:

• Customer. • Director of operations. • Foreman of the place.

Required information

You need the following information:

• The structure and shape of the perimeter walls. • A clear definition of the devices used to transport between building floors (e.g. trucks, road trains, etc.).. • The method used to download material (crane, tower crane, forklift ...) and the work involved. • The method of transport to be used to transport material within the installation area (crane, hoist, etc.).. • The dimensions and sizes must be compatible with the methods of transportation. • The height of the floor must be the indicated on the final draft. • Predisposition of an area for collecting material to dispose. • The presence of pipes that alter the hygrothermal parameters.It is recommended to isolate all sources of heat and provide an adequate ventilation system fitted with bars to ensure

constant environmental conditions. • The condition of the construction operations of the wall. All wall construction must be completed at least 60 days prior to installation; the activities of other operators should be

completed at least 30 days prior to installation. • The condition of the installation of windows and doors frames. The sizes and dimensions must be compatible with the transport devices when using a crane. • The condition of the concrete slab. • Compatibility with anti-dust products (if applicable) with the adhesive glue used to attach the pedestals.

General site conditions

• The state of the place of work of construction. • The construction zone should be cleared of all materials of access and to be clean before starting the installation. No worker or installer that is not one of those who work in installing

the floor should have access to the area. • Distribution of service. All service installations must comply with the design of the floor and take into account the overall dimensions of all components. • Specifications related to the installation of the floor level. The floor level of access must be clearly indicated by the Director of Operations. The floor level compatibility with any

eventual external constraint must be defined before starting the installation, all restrictions must be clearly communicated in the installation contract. • The presence of transport routes for the relocation of material.

General storage conditionsGeneral information

The environments where technical raised floor is to be installed must be checked beforehand to ensure their suitability. Recommended parameters are:

• The Environment should be dry and have sealed windows and door frames.• The level of moisture and temperature of storage should comply with the specifications described on the packaging. • The packaging must be handled with appropriate means of transport, such as pallet, etc…• It is not advisable to stack the box. • The packaging should be protected from impacts. • Store away from heat sources. • Store near the area in which to settle the floor. • Do not unpack the materials unless strictly necessary. When unpacking, be careful when handling components to avoid damage and to ensure traceability. • Follow the manufacturer’s instructions that are on the packing.

Pallet of 60x120 with cardboard protection.Average height 120 m

Pallet of 60x120 with cardboard protection.Average height 120 m

The pallets can be stacked and transported by truck standar forklifts or pallet trucks.

YES

NO

3938

Installation of finishes of perimeter.The finish on the perimeter, where no spikes against a wall, made of chipboard covered with tape on both sides of melanin, closes the perimeter area is visible and can be placed with a metal in an “L”. In some cases, for example, when the difference in height between the floors is less than 17 cm, can also be used as a step.

When you set the position where the steps are to be installed, it is necessary to remove the pedestals 4.5 cm. and align with the axis of the panels. At this point, place the board that acts as a lift against the axis of the panels and adjust it to the slab using screw caps and supports.

Perimeter boards are installed at the same height as the floor have an aluminum corner that can be easily fixed with wood screws and cover the thickness of the board itself and complete it from an aesthetic standpoint.

Raised access flooring for exteriorsThe raised access floor (RAF) system for terraces has been specially created to provide an aesthetic solution for terraces containing unsightly drainage slopes.By building a completely flat floor over the existing terrace floor, these slopes are conveniently hidden underneath.Height deviations are offset with height-adjustable plots and any accumulated water is drained through open joints on the newly paved surface and then channelled down the terrace’s waterproofed slopes to the drain.

Advantages• The system can be used to create a flat paved surface over sloping masonry floors with height deviations of up to 2%. Any height deviations over 2% will need to be corrected with

mortar or with wedges.• The creation of an air void under the newly paved surface generates a continuous flow of air through the pavement joints, which prevents the build-up of condensation and also

produces an insulation layer.• The under floor void, can also be used to house cables, pipes, etc.• Easy to access this space under the floor (do not use P-404 to bond tiles and plots in areas where you need to access the services underneath and be able to have space to work on it).• The cavity between the raised floor and the living area below also helps to reduce the penetration of noise into the home.• The system is quick to install as the tiles and supports are installed at the same time.• Advantages of PORCELANOSA Grupo pavement: Easy to clean, low dimensional tolerances, wide variety of finishes, hardness, etc.

4140

The external RAF is an over-raised type of pavement developed by PORCELANOSA Grupo used for terrace covering and external areas. This type of over-raised pavement allows flat surfaces on exterior supports that have slope, improving the aesthetic vision, the waterproofing and the drainage. It is a type of over-raised pavement with special ceramic tiles that are arranged on plastic PVC plots of adjustable height, so that a hollow space is determined between the support and the floor tiles.

The elements that make up this system are as follow:

Outdoor tiles to RAF for exteriorPORCELANOSA Grupo ceramic pieces.

The external RAF ceramic tiles consist of two porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo astuck with hot melt reactive to moisture. They are made with a sufficient thickness to withstand the breaking load demanded on these over-raised pavements. Thus, its main technical features are as follow:

• Format: variable. • Thickness: between 20 mm and 30 mm approx. • Water absorption <0,5 %.• Breaking load > up to 9.8 kN.• Resistance to chemical attack: UA

These porcelain stoneware slabs or technical porcelain stoneware by PORCELANOSA Grupo are manufactured with needed thickness to withstand the breaking load indicated above, which does not mean that on heavy shock or falls of heavy objects cannot produce the breaking of the same.

Structure of RAF for exteriorPlots with adjustable height.

These plots, made of weatherproof plastic, are the support on which the ceramic tile of external RAF rests. They determine the height of the system and width of the joint between slabs. This element consists of the following parts:

• Plot base: Large diameter base that distributes the weight on the support system. • Adjustable height rod that allows adapting height of the plot to the needs of the pavement over-raised. • Head: It is where the extrernal RAF rests. It has 4 dividers that determine joints of placement of a width of 4 mm.

The total height of the plot can be adjusted for different adjustable heights.

Plots properties• Manufactured by thermo-injection.• Colour: black.• Base of the material: polypropylene with mineral calcium carbonate side.• Technical stability (-25ºC + 120ºC).• Dimensional stability.• Mechanical average capacity to compression (up to 1,200 kg / unit).• Resistant to aqueous solutions of inorganic salts, acids and alkalies.• Resistant to most organic solvents as alcohol, esters and ketones.• Resistant to commercial detergents and bleach solutions.• Resistant to microorganisms for not being cultivation ground for these.• It does not punch the waterproofing sheets or thermal insulations.• Plots come marked with the slope to compensate (1% or 2%) and the installer will

point the distinctive flange towards the drain. This flange determines the maximum height, which has to point towards the drain.

• In angle or wall areas, top support flanges can be cut off to make the finishes fixing easier.

• Not resistant to oxidizing substances as nitric or sulfuric acid and halogenated hydro-carbon solvents such as gasoline.

• Finishes of surfaces which allow the installation of plots: - Mortar compression layers. - Chlorine Rubber primers.

- Butyl fabrics. - Auto protected asphalt fabrics. - Directly on the thermal insulation (extruded polystyrene with density ≥ 25

kg/m3). - Sheets of PCV and TPO. - Folding of common brick.

• Prohibited its installation: - in its entirety in facilities of animals such as pigs farms, etc. - in facilities where there is road traffic (cars, trucks, etc.). - on chippings, cellular concrete, directly on the ground and on not protected

asphalt sheets.

4342

B80305010 100005802 basic plot 10 10 mm

B80305011 100005803 basic plot 15 15 mm

B80305020 100005804 normal plot 50/70 50 - 70 mm

B80305021 100005805 normal plot 70/100 70 - 100 mm

B80305001 100005794 ultra plot 65/100 65 - 100 mm

B80305004 100005797 ultr aplot 100/130 100 - 130 mm

B80305003 100005796 ultra plot 130/220 130 - 220 mm

B80305005 100005798 ultra plot 220/310 220 - 310 mm

B80305006 100005799 ultra plot 310/400 310 - 400 mm

B80305007 100005800 ultra plot 400/490 400 - 490 mm

B80305008 100005801 ultra plot 490/580 490 - 580 mm

Installation of RAF for exteriorThe weft of ceramic tiles is determined by the position of the plots. The external RAF slabs rest on these placed on the four corners of the tile, at least, although other positions may be placed depending on the format size. Plot consumption per m2 depends on the chosen format.

The plots are fixed to the support using polyurethane adhesive (P-404). Similarly, and to avoid the tiles shaking, they are adhered to the plot.

This system is adapted to the needs of each customer, so in that way and from the project data, butech adapts the external RAF to the particularities of each project.

This position ensures good stability to the system and allows greater flexibility in the design of the ceramic weft, and it can design placements with catch joint.

The plots are to be placed on a solid support and a maximum gradient of 2%. For indoors, the support must be covered by a waterproof sheet, while outdoors, where no waterproofing system is required, the plots may rest directly on the support, if it is solid and stable, with the flap fitted directed toward the drain.

This type of pavement in terraces avoids the need of cement mortar screeds for subsequent placement of cement-based tile adhesive. This system avoids the disadvantages of terraces that may arise from the traditional placement of direct adhesion. The problems arising from variations in temperature, structural settlements or poor performance of the flooring are elimina-ted. It also allows obtaining additional benefits as a convenient accessibility at any time, allowing correct possible defects in the existing waterproofing and easy start work without the need for highly specialized, reduced noise transmission and thermal protection of the room beneath the system due to the creation of an air chamber that is in constant ventilation and the joints between tile and tile 4 mm left open for drainage of water.

References

KEA SAP Description Height

Ask for higher heights

4544

Dry installation floorNew ceramic pavement system placed dry, without use of adhesives or joints, for indoor use. Quick and easy installation, accessible, recoverable, wide range of finishes and minimal maintenance. Quick come into service, once placed it is ready to transit on it. Coating for pavements of dry inside areas in premises of individual or collective use:

• Office buildings. • Buildings of public use (administration, culture, museums, cinemas, etc ...)• Shopping centers. • Hotels. • Showrooms. • Shops.

Dry installation floorBecause cli-Ker is a lift-up tile system, the tiles can be swiftly and easily changed if needed.

Norm Testing method System

UNE 10545-3

Length 598+-0,2 mm

Width 598+-0,2 mm

Thickness 16+-0,2mm

Water absorption 0,10%

UNE 10545-4Breaking module 3,87 Mpa

Breaking strenght 3,47 kN

Deflection 2,5 mm

UNE 10545-8 Linear thermal expansion 2,5837E-05

UNE 53130Heradness shore (Polyurethane) Method A 92

Density (Polyurethane) 1210 kg/m3

The tiles click into place thanks to a simple tongue and grooved backing system.

Close-up of how the tiles fit together. In this way, you can gain access to the un-der-floor area just by lifting up a tile.

4746

Advantages• Quick and easy installation. • Clean. • Accessible. • Reusable. • Wide range of finishes. • Minimum maintenance. • Quick come into service, once placed it is ready to transit on it

SAP KEA Description

100096030 B81200209 Compensation piece 0,5mm

100096031 B81200207 Compensation piece 1mm

100096038 B81200208 Plug 5mm

100102785 B81200228 Catches 5mm

100103280 B15901003 Levelling sheet (9mt2)

Cli-ker n piece. 598x598 mm. Levelling sheet

Catches. 5 mm highCintex.

Plug. 5 mm high Compensation piece. 0,5 - 1 mm high.

References

ComponentsThe piece made in factory consists of the following:• Ceramic tile or porcelain of groups Blb and Bla as ISO 13006 and NF-EN 14411 of Porcelanosa Grupo. • Joint of polyurethane of 1 mm wide available in gray. • Base of polyurethane two-component rigid with cracks in the 4 corners shaped blade.

Additional elements for placement are: • Pieces of union, locks in the form of blade of 5 mm height in polyurethane. • Pieces of regulation or compensation; rises and plugs of polyurethane, for leveling of the system. Thicknesses of 0.5 - 1 mm for the rises and 5 mm for the plugs.• Leveling sheet viscoelastic and acoustic attenuation.

4948

InstallationForegoing considerations

• The support must be dry, free of dirt, construction debris or irregularities. • Check that the irregularity does not exceed 1.5 mm every rule of 2 m. The accumulated irregularity shall not exceed the deflection of the piece. There will be a previous rethink taking

as origin the intersection of 2 offset axis. It will be previously installed all the pavement with locks of 5 mm high.• There will be a taking of levels later and a visual inspection verifying that the pavement is firm, smooth and without lipping of tiles. It is possible the devasting of the base of

polyurethane for surface leveling.• It must be left a perimeter joint of 0,5 cm, which will be hidden once placed the skirting board.• In addition to the components supplied for placement, we must have pliers, cutter, machine of ceramic cutting and rubber mallet.

Installation steps

First of all, you must check that the bracket fulfills the minimum requirements to put the cli-ker n described above. From that moment on you’ll have to follow next steps:

Step 1: We cover the area to be paved with leveling sheet.

Step 4: Repeat the process with the help of a rubber mallet to fit the pieces until covering all the area.

Step 5: Use a level to place all the pieces appropriately. Plots are put on the catches to help levelling the floor.

Step 6: Close to walls or columns, catches should be cut with a cutter or pliers, to join pieces and level them with that wall or column.

Step 7: In case that it is required cutting the pieces, we will use a ceramic cutting machine. Once the piece is marked with ceramic cutting machine, in case of be-ing the buttons of ceramics on the optimistic side, we will review the trimmings with a radial provided that necessary, then through a dry knock we split the piece.

Step 2: Use Cintex to seal the joints between sheets.

Step 3: Fix the catch on the piece that is going to be laid. Then we put the piece on the levelling sheet placed on the floor.

Step 8: When cutting the piece, we will lose the mechanized of the corner in which to place the lock. For these purposes we will use some plugs of polyurethane, placing as many as necessary, fitting and sticking them on the basis of polyu-rethane.

* For the installation of screens on the system, it will be used a plug of polyurethane for proper fixation, protecting the ceramics with the same.

5150

Cli-ker n exterior is a new ceramic flooring system created by PORCELANOSA butech, for quick and easy, dry installation of exterior floors. No use of mortar or joints needed.Quick and easy installation, accessible, recoverable, wide range of finishes and minimal maintenance.. Usable right after its installation.

Advantages• Easy installation• Clean and quick• No maintenance• No adhesives or grout needed.• Anti-slip tile• Adapted to all slopes• Wide range of finishes from PORCELANOSA• Reusable• Frost-resistants tile

FeaturesThe use of cli-ker n exterior system is recommended when the surface to tile meets the following requirements: Terraces with 1 slope, 2 slopes or 4 slopes, when the angles form 90 degrees.

• Tile format: 44.8 x 44.8 cm• 5 mm hollow joint between tiles• Machined base and pieces to allow water evacuation

Standard Testing method Systeme

UNE 10545-3

Length 448 +/- 0,2 mm

Width 448 +/- 0,2 mm

Thickness 21 +/- 0,2mm

Water absorption 0,10%

UNE 10545-4 Breaking strength 3,53 kN

Deflection 4,2 mm

UNE 10545-8 Linear thermal expansion 2,5837E-05

UNE 53130Shore hardness polyurethane Méthode A 92

Density (Polyurethane) 1210 kg/m3

exterior

5352

Components Steps for a successful installation

Cli-ker n exterior base Finishing profile

Joining pieceP-404 mastic

Compensation piece Plug

Step 1: Cli-ker n exterior is a system that adapts to the existing slopes. We re-commend that the slope lines be marked to make installation easier, and to redefine the surface. Start installation from the lowest point.

Step 2: The tiles must be cut using a tile cutter or a radial saw. To install the cut pieces, use the bases instead of the joining pieces.Glue the bases to the back of the cli-ker piece with P-404 mastic.

Step 3: When the cli-ker n exterior system finishes against a wall, column o other obstacles that do not allow to install the joining piece, cut it with a hand saw or radial saw.

Pass 5: The finishing pieces are stainless steel “L” profiles that will be insta-lled over the perimeter of the surface formed by cli-ker n exterior. For installation, cut the profile to size and fit it on the edge of the cli-ker n exterior.

Step 6: The finishing profile must be glued to the cli-ker n exterior piece with P-404 mastic.

Step 7: To allow for water evacuation, the profile must not cover the full len-gth of the piece.

Step 4: To reduce the small level defects that might be found on the support on which we are going to install the system, lower the base of the cli-ker n exterior. In case you need to slightly raise the tile, place a compensation piece on the joining piece.

5554

How to get a budget of a butech system?

• Come to one of our stores/ distributors, where you will be attended by our professionals, who will show you the products that best suit your needs.

• To provide you with the best service, you should provide us the plans of the project and fill a study sheet customized to your product.

• Once delivered the plans and the sheet correctly completed, from the Technical Deptartment of butech, a first budget will be done.

• In less than 15 days, the same professional who attended you will deliver the budget.

• In case of acceptance, and if you wish, you will receive the visit of one of our technicians for the preparation of the final budget.

5756

A CORUÑAA CORUÑA - SUMINISTROS VIA-MARAvda. Finisterre, 11. T: 981 279 431 BETANZOS - SUMINISTROS VIA-MARAvenida Fraga Iribarne, s/n. T: 981 772 190 FERROL - NEIRA & ORTEGAL S.L.Carretera Catabois, 258. T: 981 326 532 - F: 981 324 951ORTIGUEIRA - NEIRA & ORTEGAL S.L.Carretera C-642 s/n, Cuiña. T: 981 400 880 - F: 981 400 883SANTIAGO DE COMPOSTELA -PORCELANOSAGeneral Pardiñas, 13-Bajo. T: 981 569 230 SANTIAGO DE COMPOSTELA - JOSÉ OTERORua Clara Campoamor, 13-15 (Montouto)- TeoT: 981 509 270 - F: 981 819 334SANTIAGO DE COMPOSTELA - PORCELANOSAPol. Comercial Costa Vella s/n. T: 981 897 595 F:981 530 901

ÁLAVAVITORIA-GASTEIZ - JORGE FERNÁNDEZ Los Herrán, 30. T: 945 254 755 - F: 945 259 668VITORIA-GASTEIZ - JORGE FERNÁNDEZ Polígono Jundiz. Paduleta, 53. T: 945 244 250 - F: 945 229 321

ALBACETEALBACETE - PORCELANOSAAvda. Gregorio Arcos, 32 (Polígono Campollano) T: 967 243 658 - F: 967 193 465VILLAROBLEDO - OLIVARES MATERIALES DE CONSTRUCCIONAvda. Reyes Católicos, 168. T: 967 138 105 - F: 967 138 023

ALICANTEALICANTE - PORCELANOSAPol. Las Atalayas, Parcela VI. Calle del Franco. T: 965 109 561 - F: 965 106 965BENISSA - HIJOS DE JUAN RIBESAvda. de la Estación, 2. T: 965 730 419CALPE - HIJOS JUAN RIBESAvenida Ejércitos Españoles, Edificio Apolo VII, Local 10. T: 965 839 105DENIA - LLACER INSTALACIONES Y SERVICIOSPedreguer 10-12. T: 965 781 635 - F: 965 789 821ELCHE - PORCELANOSAAvda. Alicante, 105 T: 966 610 676 - F: 966 610 700JAVEA - AZULEJOS JAVEAC/Liverpool, 4. T: 965 791 036SAN JUAN - PORCELANOSACarretera Valencia, km 88. T: 965 656 200 - F: 965 655 644TORREVIEJA - PORCELANOSAAvda. Cortes Valencianas, 58 Esq. Crucero Baleares. T: 966 708 445 - F: 965 718 722

ALMERÍAALMERÍA - PORCELANOSAAvenida Mediterráneo, 2º tramo. T: 950 143 567 - F: 950 142 067EL EJIDO - PORCELANOSACtra. N-340, km. 411. T: 950 483 285 - F: 950 486 500VICAR - PORCELANOSACentro Comercial Viapark, Parcela 1. T: 950 325 575 - F: 950 338 651

ASTURIASOVIEDO- PORCELANOSAPol.Espíritu Santo C/ Dinamarca s/n. T: 985 791 526- F: 985 985 963

ÁVILAÁVILA - PAVIMARSAPol. industrial Vicolozano - Parcela 2. T: 920 259 820 - F: 920 259 821

BADAJOZMÉRIDA - PORCELANOSAAvenida Reina Sofía, 8. T: 924 330 218 - F: 924 330 315BADAJOZ - GALLERY CERAMICCarretera N-V Madrid-Lisboa, km 399. T: 924 229 144 - F: 924 229 143AZUAGA - CORVILLO VERAPol. Industrial Parcela 5. T: 924 892 579- F: 924 890 688LLERENA - CERAMICC/ Convento Santa Isabel, 2 Local Comercial. T: 924 108 318

BARCELONAL’HOSPITALET DE LLOBREGAT - PORCELANOSACiències, 65. Gran Vía l Hospitalet. T: 932 642 500 - F: 932 007 036 CALAF - PLANELLCtra. Manresa Km.31 . T: 938 698 750 - F: 938 600 181CANOVELLES - COMERCIAL MAESTRO CANETPol. Can Castells, nau 7-8. T: 938 466 568 - F: 938 409 216CASSERES - MATERIALS CASSERRESSant Rafael. T: 938 213 770 MANRESA - PRAT MATERIALS I MAQUINARIAC/ Mossen Jacint Verdaguer, 26. T: 938 741 903 - F: 938 741 903NAVAS - PRAT MATERIALS I MAQUINARIAC/ De Mujar, 52. T: 938 204 033 - F: 938 204 098SABADELL - CASANOVAAvda. Rafael Casanova 24 T: 937 481 015 - F: 937 274 834

ST. BOI DE LLOBREGAT - GARROCtra. Sta. Creu de Calafell, km. 10,7. T: 936 545 952 - F: 938 400 620ST. FRUITOS DE BAGÉS - CASANOVACtra. De Manresa a Berga Km. 1. Naus 2-7. T: 938 770 625- F: 938 776 530

TARADELL - JODULCtra. de Vic, Km 5,8. T: 938 800 800 - F: 938 126 054TORELLÓ - JOAN DOTC/ Ter, 50. T: 938 504 646 - F: 938 504 286VILANOVA DEL CAMI - PLANELLCtra. Vilafranca 108-111. T: 938 060 240 - F: 938 060 239

BURGOSMEDINA DE POMAR - CERÁMICA DE LAS MERINDADESAvda. Bilbao, 11. T: 947 192 081 - F: 947 192 082MIRANDA DE EBRO - JORGE FERNÁNDEZCamino Fuente Basilio, s/n. T: 947 323 351 - F: 947 314 589BURGOS -BIGMAT FONTECHAAlcalde Martín Cobos, 15. Nave 5 y 6. T: 947 483 902 - F: 947 483 941

CÁCERESCÁCERES - PORCELANOSAAvda. Juan Pablo II, 130. T: 927 236 337 - F: 927 236 205 MORALEJA - BIGMAT CAYUELAAvda. Extremadura, 26. T: 927 515 198 - F: 927 147 266PLASENCIA - ALICATADORES ROMU S.A.Avda. del Valle, 59. T: 927 426 493 - F: 927 426 495

CÁDIZEL PUERTO DE SANTA MARíA - PORCELANOSAPol. El Palmar. Carretera Madrid-Cádiz, km 653,2 . T: 956 540 084 - F: 956 872 464ALGECIRAS - PORCELANOSACtra. de Málaga, km 109. T: 956 635 282 - F: 956 635 285JEREZ DE LA FRONTERA - PORCELANOSACarretera N-IV. Parque Empresarial, parcela D1. T: 956 187 160 - F: 956 302 904OLVERA - ALMECORAvda Julián Besteiro, 29. T: 956 120 776 - F: 956 120 776SAN FERNANDO - PORCELANOSAPolígono Tres Caminos, s/n. T: 956 592 360 - F: 956 884 677UBRIQUE - DOCURRIPaseo del Prado 38-40. T: 956 461 838 - F: 956 460 384VILLAMARTIN - AZULGRIFC/ Rosario, 9. T: 956 730 687 - F: 956 730 911

CANTABRIASANTANDER - PORCELANOSAAvenida Parayas, s/n. T: 942 352 510 - F: 942 352 638TORRELAVEGA - PORCELANOSABoulevard Demetrio Herrero, 1. T: 942 835 026 - F: 942 881 787

CASTELLÓNCASTELLÓN DE LA PLANA - PORCELANOSAAsensi, 9. T: 964 239 162 - F: 964 238 930VILLARREAL - PORCELANOSACtra.Vila-real - Puebla de Arenoso (CV- 20) Km. 0,7T: 964 506 800 - F: 964 525 418VINAROZ - PORCELANOSACarretera N-340, km 1.050,1. T: 964 400 944 - F: 964 400 650

CEUTACEUTA - BAEZA.Ampliación muelle de Poniente, 96. T: 956 511 312 - F: 956 511 309

CIUDAD REALCIUDAD REAL - PORCELANOSACarretera de Carrión, Km.1. T: 926 251 730 - F: 926 255 741ALCAZAR DE SAN JUAN - PORCELANOSACorredera, 56. T: 926 546 727 - F: 926 546 727TOMELLOSO - PORCELANOSAAvda. de los industriales, parcela 9. (P.I. El Bombo) T: 926 529 206 - F: 926 529 207

CÓRDOBACÓRDOBA - PORCELANOSACtra. Nacional IV Km.404. Pol. de Torrecilla. T: 957 760 024 - F: 957 760 123LUCENA - FRAPECO DECO S.L.Ejido Plaza de Toros. T: 957 509 334POZOBLANCO - ACAIÑAS CABRERACtra. pozoblanco-Alcaracejos Km 3,3 T: 957 772 999- F: 957 131 170VILLA DEL RIO - JUAN PRIETO E HIJOS S.L.Ctra. Bujalance, s/n T: 957 177 693 - F: 957 177 335HINOJOSA DEL DUQUE - HORMIGONES SAN FRANCISCOC/ Velázquez, 13 T: 957 140 181SANEAMIENTO Y REVESTIMIENTOS JULIOC/ Camino Fontanal s/n T: 957 540 943

CUENCA CUENCA - PORCELANOSAHermanos Becerril, 6 bajo. T: 969 233 200 - F: 969 234 475CASAS DE HARO - MAT. CONST. MARTINEZ ORTEGAC/ Dos de Mayo, 28. T: 969 380 708 - F: 969 380 708 TARANCÓN - VICENTE DE LOS RIOS S.A.Avda del Progreso, 19. T: 969 321 323 - F: 969 321 334VILLANUEVA DE LA JARA - ALMACENES PAÑOS S.L. Camino de Rubielos, 8. T: 967 498 000 - F: 967 498 000

GIRONABLANES - BRECOR SLCtra.Tordera,79. Blanes. T: 972 336 062 - F: 972 358 482

CORNELLA DEL TERRI - OLIVERAS Ctra. De Girona a Banyoles Km. 12,8. T: 972 594 131 - F: 972 594 552ESCLANYÀ-BEGUR - MATERIALES CREIXELL C/Palafrugel Regencos P.I. Riera Esclanya, 1. T: 972 300 628 - F: 972 610 772FIGUERES - OLIVERASCtra. N-II Km. 759. T: 972 672 259 - F: 972 672 255LES PRESSES - OLIVERASPol. Ind. Les Presses. Parcel.la 20. T: 972 694 704 - F: 972 693 003PALOL D’ONYAR-QUART - OLIVERASCtra. Comarcal C-250 Km. 4,3. T: 972 468 119 - F: 972 468 123

GRANADAARMILLA - TECMACERAvenida San Rafael. (Junto Sprinter). T: 958 253 081 - F: 958 183 367

GUIPÚZCOASAN SEBASTIÁN - JORGE FERNÁNDEZPolígono Belartza. Fernando Múgika, 15. T: 943 376 966 - F: 943 376 841

HUELVAHUELVA - PORCELANOSACtra. Tráfico Pesado, s/n Pol. La Paz. T: 959 543 600 - F: 959 234 652

HUESCAHUESCA - PORCELANOSAPol. Sepes. C/ Ronda la Industria 1-3 nave C. T: 974 242 738 - F: 974 242 676FRAGA - BERGES CENTRO COMERCIALAvda. Aragón, 70. T: 974 471 439 - F: 974 471 439AINSA - COMERCIAL CAMPODARVEPol. Ind. Sobrarbe, naves 11 y 12T: 974 500 267 - F: 974 500 865

ILLES BALEARSPALMA DE MALLORCA - PORCELANOSAGran Via Asima, 21 Pol. Son Castelló. T: 971 430 667 - F: 971 297 094INCA (MALLORCA)- PORCELANOSAC/Pagesos s/n. Pol. Inca. T: 971 507 650 - F: 971 507 656LLUCMAJOR (MALLORCA) - MAGATZEM SES FORQUESC/ Doctor Fleming, 10. T: 971 662 114 - F: 971 662 816SOLLER- CÁN SOLERc/ del Mar,193. T: 971 630 219MANACOR- GALMESc/ Via Palma. T: 971 554 502CALA D´ OR- MACODORCtra. Calonge-Cala Dór. T: 971 658 210ANDRAITX - TUCASAC/ Habana. T: 971 136 476SANT ANTONI DE PORTMANY (IBIZA)- PORCELANOSAPol. Monte Cristo, s/n. Ctra. Ibiza. T: 971 317 292 - F: 971 317 293

JAÉNJAÉN - PORCELANOSAPolígono Olivares. Carretera Bailén-Motril, km 323. T: 953 280 757 - F: 953 284 035ALCALA LA REAL - PAVIMENTOS AZUGRISAPolígono Ind. Fte. Granada.Vial II. T: 953 582 963 BEAS DE SEGURA - GRUPO PEREA MORANTE S.L.Polígono El Cornicabral, parcela 517 T: 953 424 565 HUELMA - VIFERSAN S.L.C/ Virgen de la Fuensanta, 61. T: 953 391 413LINARES - HERNÁNDEZ GÁMEZ S.L. Ctra. Torreblascopedro, s/n. T: 953 693 423 - F: 953 693 444ÚBEDA - HERNANDEZ GAMEZAvenida de la libertad, 88. T: 953 795 168 - F: 953 795 168VILLACARRILLO - MAT. CONST. Y SAN. HIJOS MARTIN SANCHEZC/ José Rodero Mataran, 53. T: 953 454 167

LA RIOJALOGROÑO - RIOJACERAvenida de Burgos, 43-45. T: 941 286 021 - F: 941 202 271

LAS PALMASLAS PALMAS DE GRAN CANARIA - PORC. Y PAV. CANARIOSAvenida Mesa y López, 63. T: 928 472 949 - F: 928 472 944

LEÓNSAN ANDRÉS DE RABANEDO - PORCELANOSACtra León-Astorga, km 3,5. - San Andrés de Rabanedo -T: 987 801 570 - F: 987 801 475

LLEIDAEL PONT DE SUERT - PRETENSADOS RIBERACtra. N-230 Km. 124,5. T: 973 690 063 - F: 973 690 400LA SEU DÚRGEL - MATERIALS PIRINEUCtra. de Lleida, 28. T: 973 351 850 - F: 973 353 410LLEIDA - PUJOL ELEMENTSCtra. Tarragona Km 40. T: 973 202 350 - F: 973 203 113GOLMES - ARCIARAvda Mediterranea, 40-44 Pol. GolparcT: 973 601 589 - F: 973 711 448

VIELHA - COMERCIAL RIBERACtra. França, 40 (Mig Aran). T: 973 641 460 - F: 973 642 271TARREGA- NOUMAGC/Júpiter,7 (Pol. Ind. La Canaleta). T:607 497 330 - F:

LUGOFOZ - ALMACENES BAHíAMaestro Lugilde, 6. T: 982 140 957 LUGO - ARIAS NADELA Tolda de Castilla, s/n. T: 982 245 725XOVE - ESTABLECIMIENTOS REY,S.L.Avda. Diputación, 88 T: 982 592 006 - F:982 592 071 MADRIDLEGANÉS - PORCELANOSAAvda. Recomba, 13. Pol. la Laguna Salida 53 - M50. T: 914 819 200 - F: 916 930 292ALCOBENDAS - PORCELANOSAParque Río Norte. T: 916 623 232 - F: 916 624 607ALCORCÓN - PORCELANOSACtra. N-V, km 15,5. Parque Oeste de Alcorcón. T: 916 890 172 - F: 916 890 170MADRID - PORCELANOSAOrtega y Gasset, 62. Esquina Conde Peñalver. T: 914 448 460 - F: 914 025 111MADRID - PORCELANOSAAlcalá, 514. T: 917 545 161 - F: 917 545 555

MÁLAGAMÁLAGA - PORCELANOSAAvda. Velázquez, 77. T: 952 241 375 - F: 952 240 092ANTEQUERA - PORCELANOSARío de la Villa, 3. Pol. Industrial. T: 952 701 819 - F: 952 843 751MARBELLA - PORCELANOSAAvda. Ricardo Soriano, 65. T: 952 826 868 - F: 952 822 880

MURCIAMURCIA - PORCELANOSAAvda. Juan de Borbón, s/n. Parque Comercial Thader. T: 968 879 527 - F:968 831 725CARAVACA DE LA CRUZ - PORCELANOSAAvenida Ctra. Granada, 20. T: 968 705 647 - F: 968 705 648CARTAGENA - PORCELANOSAC/ Belgrado. Parcela 81. Pol. Ind. Cabezo Beaza. T: 968 529 302 - F: 968 528 362LORCA - PORCELANOSACtra. de Granada, 127. Polígono Los Peñones. T: 968 478 130 - F: 968 470 820YECLA - PORCELANOSAAvenida de la Paz, 195. T: 968 718 048 - F: 968 718 048

NAVARRAMULTIVA BAJA - MONTEJO CERÁMICASPol. Ctra. Tajonar, Calle 2, Naves 2-4. T: 948 239 065 - F: 948 230 503CINTRUÉNIGO - CERÁMICAS CECILIO CHIVITEPol. Ind. s/n. Variante N-113. T: 948 811 973 - F: 948 815 249PAMPLONA - MONTEJO CERÁMICASNavas de Tolosa, s/n. T: 948 224 000 - F: 948 226 424TUDELA - MONTEJO CERÁMICASCtra. Tudela -Tarazona, Pol. Centro de Servicios de Tudela. T: 948 848 365- F: 948 848 573

OURENSEOURENSE - BLANCO QUINTASC/ Nosa Señora da Sainza, 48. T: 988 391 114 - F: 988 250 413 CARBALLIÑO - JOSE R. PITEIRA,S.L.Avda. Julio Rodriguez Soto,63. T: 988 271 071 - F: 988 274 780

PALENCIAPALENCIA - CANTALAPIEDRAC/ La Puebla,2. T: 979 706 421 - F: 979 702 652

PONTEVEDRADENA - PREFABRICADOS DENA S.L.Rua Galicia, 24 T: 986 743 121 SEIXO, MARÍN - SANEAMIENTOS ROSALESAvenida Doctor Otero Ulloa, 1. T: 986 702 041 - F: 986 702 080O GROVE - PREFABRICADOS DENA S.L.C/Alexandre Boveda,82 T: 986 733 230 - F: 986 733 415LALÍN - ALMACENES CANDA, S.L.Calle Monserrat, 36-39 - B. T: 986 780 184 - F: 986 782 301MOS- BLANCO QUINTAS, S.L.Monte Faquiña s/n - B. T: 986 288 041 - F: 986 486 316VIGO - SANEAMIENTOS ROSALESGarcía Barbón, 139 - B. T: 986 228 806

SALAMANCASALAMANCA - PORCELANOSAPol. Villares. Ctra. Salamanca - Valladolid, km 2,5. T: 923 243 811 - F: 923 123 414

SANTA CRUZ DE TENERIFESANTA CRUZ DE TENERIFE - PORC. Y PAV. CANARIOSAvda. 3 de Mayo, 18. T: 922 209 595 - F: 922 209 596LOS LLANOS DE ARIDANE - AFELSALas Rosas, s/n. T: 922 461 112 - F: 922 461 166

SANTA CRUZ DE LA PALMA - AFELSAAbenguareme, 3. T: 922 412 143 - F: 922 420 012

SEGOVIAEL ESPINAR - SEGOCERCarretera Madrid - La Coruña, km 64. T: 921 172 426 - F: 921 171 828SEGOVIA - SEGOCERJosé Zorrilla, 134. T: 921 444 122

SEVILLASEVILLA - PORCELANOSAPol. Ind.La Negrilla. C/ Tipografía,2.(Autovía A-92 Málaga-Granada) T: 954 260540 - F: 954 261 391DOS HERMANAS - PORCELANOSAParque Cial., Zona 2. Doctor Fleming, Sector 13, Parcela 3. T: 955 661 368 - F: 955 661 368LORA DEL RÍO - HERNÁNDEZ CARBALLO S.L.C/ Betis s/n. T: 955 800 473 - F: 955 801 439TOMARES - PORCELANOSASan Roque, s/n. Polígono El Manchón. T: 954 152 792 - F: 954 153 188

SORIASORIA - MAT. CONSTRUCCIÓN ODORICIO S.L.Polígono las Casas-II. Calles A y J, Parcela 201. T: 975 233 228 - F: 975 232 188

TARRAGONACAMBRILS - MONSERRATE ESTIL CERAMIC SLPol. Ind. Belianes nau 5 Ctra. Cambrils-Montbrió. T: 977 364 900 - F: 977 364 953ALCOVER - EXPOMATC/ Tramuntana, s/n (pol. Roques Roges)T: 977 760 476 - F: EL VENDRELL - VIUDA DE ANTONIO FONTC/ Valls, 12. T: 977 660 794 - F: 977 662 217REUS - COMERCIAL STCC/Pz de les Oques, 8. T: 977 31 25 02 - F: 977 317 211 RODA DE BARA - CONSTRUCCIONS CIUROAcceso a Roda de Bara Km. 1. T:977 802 951 - F:977 802 012VALLS - RAMÓN MAGRIÑA BATALLAC/ Montblanc 14. T:977 600 210 - F:977 603 302TORTOSA - MATERIALS GISBERTCtra. Gandesa Km 3,5. T:977 500 306 - F:977 501 550

TERUELTERUEL - GARGÓNPolígono La Paz, Parcela 143-149. T: 978 609 661

TOLEDOTOLEDO - PORCELANOSAPol.Ind.Sta. María de Benquerencia, C/del Río Marchés,123 T: 925 232 402 F:925 232 406ILLESCAS - PORCELANOSACtra. A-42 Km. 32 T: 925 532 011 F:925 513 055

VALENCIAALBUIXECH - PORCELANOSAAvda. Mediterráneo, Parcela 6. Pol. Ind. del Mediterráneo.T: 96 141 7227-F: 961 401 078GANDÍA - PORCELANOSAZona Cial. La Vital, Avda de la Vital, 43-A T: 962 954 105 - F: 962 965 980PATERNA - PORCELANOSAZona Cial. Heron City, Pista Ademuz, S. 6-7 - Calle V-1. Parc.1 Sec.14. T: 963 160 348 - F: 963 160 599SEDAVÍ - PORCELANOSAAvenida Mediterráneo. Zona Cial. de Sedaví. T: 963 185 021 - F: 963 180 094VALENCIA - PORCELANOSAColón, 56. T: 963 530 230 - F: 963 531 688

VALLADOLIDVALLADOLID - CANTALAPIEDRACarretera de Soria A-24, km 5,5. T: 983 217 010 - F: 983 200 921

VIZCAYAAMOREBIETA - BILBUBarrio Boroa, s/n. T: 946 731 158 - F: 946 733 265BILBAO - BILBUIturriaga, 78. T: 944 113 018 - F: 944 128 637BILBAO - BILBUAlameda Recalde, 39 - 41. T: 944 218 625 - F:944 218 879

ZAMORA ZAMORA - PORCELANOSAAvenida Cardenal Cisneros, s/n. T: 980 519 283 - F: 980 529 404

ZARAGOZAZARAGOZA - PORCELANOSAAutovía de Logroño, km 2. T: 976 403 131 - F: 976 300 094ZARAGOZA - PORCELANOSAPlataforma Logística PLA-ZA. C/ Taormina, 2.T: 876 269 500 - F: 876 269 389ZARAGOZA - PORCELANOSA

Parque Cial. Puerto Venecia. T: 976 930 800 - F: 976 930 603

Showrooms España

Showrooms España

5958

ALBANIATIRANA - ALBA CERAMICA PORCELANOSA GRUPOT: +355 42233817 - F: +355 42233817TIRANA - ALBA CERAMICAT: +355 48300084 - F: +355 48300084

ALEMANIAASCHAFFENBURG - KALKWERKET: +49 (0) 60 213 601 62 - F: +49 (0) 60 213 602 93BAD SALZUFLEN - W. LINNENBECKER GmbHT: +49 (0) 5222 / 5301 221 - F: +49 (0) 5222 / 5301 209BAUTZEN - FLIESEN LEHMANN GmbHT: +49 (0) 3591 / 3726 32 - F: +49 (0) 351 / 8931420BEESKOW - BADER BAUSTOFFE & WERKZEUGE, HANDELSGESELLSCHAFT T: GmbH +49 (0) 3366 / 417 0 - F: +49 (0) 3366 / 417 90BERGISCH GLADBACH - SCHMIDT RUDERSDORF GmbH & CoT: +49 (0) 2204 / 4007 0 771 - F: +49 (0) 3320 / 854715BERLIN - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 30 / 756 888 - F: +49 (0) 30 / 756 88 756BERLIN - FLIESENPARADIES GLAESKE + SEFZIG GMBHT: +49 (0) 30 650 737 0 - F: +49 (0) 30 650 737 34BERLIN - BERLINER FLIESENMARKT GMBHT: +49 (0) 30 326 725 10 - F: +49 (0) 30 326 725 58BONN-BUSCHDORF - SCHMIDT-RUDERSDORFT: +49 0228 55916-0 - F:BOFFZEN - HERMANN BACH GMBH & CO. KGT: +49 (0) 5271 / 955 251 - F: +49 (0) 5271 / 955 200BOTTROP - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 2041 / 7958 13 - F: +49 (0) 2041 / 7958 10BRUCHSAL - TAXIS - BRUCHSALT: +49 (0) 72 518 005 0 - F: +49 (0) 72 518 005 40BURGSTÄDT - FLIESEN THOMAS FLIESENGROßHANDEL GMBHT: +49 (0) 3724 / 1856 0 - F: +49 (0) 3724 / 1856 70CRAILSHEIM - TAXIS - CRAILSHEIMT: +49 (0) 7951 301 0 - F: +49 (0) 7951 301 100DORTMUND - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 231 / 562 090 22 - F: +49 (0) 231 / 562 090 88ELTERLEIN - FLIESNHAUS MULLERT: +49 (0) 37349 / 7305 - F: +49 (0) 37349 / 6093ERFURT - FLIESENZENTRUM ERFURTT: +49 (0) 361 427070 - F: +49 (0) 361 4270777ERKRATH - W. LINNENBECKER GMBHT: +49 (0) 211 / 92503 19 - F: +49 (0) 211 / 92503 34FRANKFURT - J. N. KÖBIG GMBH - FRANKFURTT: +49 (0) 69 959 645 5 - F: +49 (0) 69 959 645 79FREIBURG - GÖTZ & MORIZ GMBHT: +49 (0) 76 145 180 - F: +49 (0) 76 145 711 2FULDA - OSWALD KERAMIK UND STEIN GMBHT: +49 (0) 66 194 151 0 - F: +49 (0) 66 194 151 40GERA - BAUSTOFFE GEBR.LÖFFLER GMBHT: +49 (0) 365 430 701 9 - F: +49 (0) 365 430 701 4GÖRLITZ - FLIESEN-PEDERSEN GMBHT: +49 (0) 3581 / 402809 - F: +49 (0) 3581 / 409166HAMBURG - LURUP - CROONEN FLIESENHANDEL GMBHT: +49 (0) 40 / 83383 377 - F: +49 (0) 40 / 83383 301KARLSTADT - FLIESEN GEHRETT: +49 (0) 93 539 731 0 - F: +49 (0) 93 539 731 26KEHL / RHEIN - TAXIS - KEHLT: +49 (0) 78 519 383 16 - F: +49 (0) 78 519 383 20KOBLENZ - J. N. KÖBIG GMBH - KOBLENZT: +49 (0) 26 198 169 20 - F: +49 (0) 26 198 169 10KRANICHFELD - MÜHL 24 - KRANICHFELDT: +49 (0) 36 450 330 - F: +49 (0) 36 450 332 89LEVERKUSEN-BUSCHDORF - SCHMIDT-RUDERSDORFT: +49 02 14 - 8 68 13 0 - F:+49 02 14 - 8 68 13 13LÖBNITZ - SACHSENKERAM GBRT: +49 (0) 34208 / 7400 - F: +49 (0) 34208 / 7400LÜBECK - HEINRICH´S FLIESENMARKTT: +49 (0) 451 8966693 - F: +49 (0) 451 8973494MAINZ - J. N. KÖBIG GMBH - MAINZT: +49 (0) 61 313 942 27 - F: +49 (0) 61 316 942 75MESCHEDE - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 291 / 952 82 21 - F: +49 (0) 291 / 952 82 82MÜNCHEN - CERAMICAS OHGT: +49 (0) 89 318 280 0 - F: +49 (0) 89 318 280 20MÜNSTER - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 251 / 979 12 21 - F: +49 (0) 251 / 979 1220NORDHAUSEN - HERMANN BACH GMBH & CO. KGT: +49 (0) 3631 / 633 126 - F: +49 (0) 3631 / 633 143NÜRNBERG/HAFEN - HEINRICH CHRIST GMBH & CO. KGT: +49 (0) 91 164 318 0 - F: +49 (0) 91 164 318 50PLAUEN - MATTHIAS SCHUHT: +49(0) 374 1203 881POTSDAM OT FAHRLAND - KERANA KERAMIK - GMBHT: +49 (0) 33208 / 547 16 - F: +49 (0) 33208 / 547 15RADEBEUL - FLIESEN EHRLICH & CO. GMBHT: +49 (0) 351 / 89314 10 - F: +49 (0) 351 / 89314 20REUTLINGEN - TAXIS - REUTLINGENT: +49 (0) 71 219 884 0 - F: +49 (0) 71 219 884 40RONNENBERG / EMPELDE - W. LINNENBECKER GMBH & CO. KGT: +49 (0) 511 / 438 90 36 - F: +49 (0) 511 / 438 90 49SCHRAMBERG - SULGEN - ARMBRUSTER GMBHT: +49 (0) 7422 28008-0 - F: +49 (0) 7422 28008-20STUHR-MOORDERCH - NORBERT BANGT: +49 (0) 42 156 591 78 - F: +49 (0) 42 156 591 79STUTTGART - TAXIS - STUTTGARTT: +49 (0) 71 189 003 121 - F: +49 (0) 71 189 003 104VÖLKLINGEN - NIEDERER GMBHT: +49 (0) 68 989 802 21 - F: +49 (0) 68 989 802 30VS-SCHWENNINGEN - TAXIS - SCHWENNINGENT: +49 (0) 77 206 927 0 - F: +49 (0) 77 206 927 35WEINSBERG - BSF BAU CENTER GMBHT: +49 (0) 71 349 130 - F: +49 (0) 71 349 131 00

WIESBADEN-BIEBRICH - J. N. KÖBIG GMBH - WIESBADENT: +49 (0) 611 27810 - F: +49 (0) 611 25674WÜRSELEN - SCHMIDT-RUDERSDORFT: +49 (0) 24 05 - 41 38 50 - F:+49 (0) 24 05 - 41 38 55ZWETHAU - GRAMER GMBHT: +49 (0) 3421 / 7327 18 - F: +49 (0) 3421 / 7326 73

ANGOLALUANDA-PORCELANOSA ANGOLAT: +244931173551 - F: +244222372374

ARABIA SAUDÍJEDDAH - MANART AL ANDALOS ESTT: +966 2 629 3402 - F: +966 2 629 3416RIYADH - MANART AL ANDALOS ESTT: +966 1 282 1500

ARGELIAALGER - NOVACASAT: +00213 2121 1939 - F: +00213 2121 1939

ARGENTINABUENOS AIRES - NESTOR O. MACAGNOT: +54 11 477 630 08 - F: +54 11 477 630 08BUENOS AIRES - BLAISTEN S.A.T: +54 11 463 620 00 - F: +54 11 463 614 86MAR DEL PLATA - IMEPHO S.A.T: +54 02 234 813 827 - F: +54 02 234 813 827MENDOZA - VICTOR JOSE GULLOT: +54 26 143 142 00 - F: +54 26 143 142 00

ARMENIAYEREVAN - SACO & ARARAT-SALON BOMONDT: +37 410 55 08 99 - F: +37 410 51 75 81

AUSTRALIAOCEANIA:AUSTRALIAN REPRESENTATIVE - AUSTRALIAN FACTORY REPRESENTATIVET: +61 8 81186244 - F: +61 8 8118 6220NEW SOUTH WALES:NEWCASTLE WEST - EARP BROST: +61 2 4925 4555 - F: +61 2 4929 4932SYDNEY - EARP BROST: +61 2 4962 5500 - F: +61 2 9410 2011QUEENSLAND:BRISBANE - TILESCOPE IMPORTST: +61 7 3371 5777 - F: +61 7 3371 5133SUNSHINE COAST - BRISBANE - ACE STONE & TILEST: +61 7 5493 3344 - F: +61 7 5493 3117BRISBANE - MAJER TILEST: +61 7 3852 4444 - F: +61 7 3852 4344SOUTH AUSTRALIA:ADELAIDE - ITALIA CERAMICST: +61 8 8336 2366 - F: +61 8 8336 9016TASMANIA:HOBART - ROSSETTO TILINGT: +61 3 6231 2931 - F: +61 3 6231 5783LAUNCESTON - ROSSETTO TILINGT: +61 3 6326 4955 - F: +61 3 6326 6003VICTORIA:MELBOURNE - EARP BROST: +61 3 9328 8598 - F: +61 3 9348 9996WESTERN AUSTRALIA:PERTH - CERAMOT: +61 8 9445 1777 - F: +61 8 9446 3127

AUSTRIAGRAZ - FLIESEN TENNET: +43 316 262 524 0 - F: +43 316 262 524 22GRAZ - TENNET: +43 316 26 25 24 - F: +43 316 26 25 24-22BADKULT-NORT - TENNE WIEN 22T: +43 1 20 20 520 - F: +43 1 20 20 520-20BRUCK - TENNET: +43 3862 588 44 - F: +43 3862 588 44-22LEIBNITZ - TENNE KINDERMANN BAD & HEIZTECHNIKT: +43 3452 707-65 - F: +43 3452 707-29LINZ - BEINKOFERT: +43 732 776 543 0 - F: +43 732 776 543 60SALZBURG - STURMBERGER KERAMIKAGENTURT: +43 662 879 322 - F: +43 662 872 389VÖSENDORF - TENNET: +43 1 699 33 33 - F: +43 1 699 33 33-22

AZERBAIYÁNBAKU - AKSESUAR PORCELANOSA GRUPOT: +994 12 5962548/+994 12 4973103 - F: +994 12 4474383BAKU - AKSESUAR INSAATT: +994 12 4409970/+994 12 4403145 - F: +994 12 4403145

BANGLADESHDHAKA - SAS PROGRESSIVE CO.T: +88-02-8813796 - F: +88-02-8713501

BAHRÉINMANAMA - AL ABBAS GALLERYT: +973 741 919 - F: +973 741 747

BÉLGICAHEIST-OP-DEN-BERG - PGB CERAMICA NVT: +32 (0) 15 253366 - F: +32 (0) 15 253367BERMUDASPEMBROKE - PEMBROKE TILE & STONE Co. LTD

T: +441 292 8453 - F: +441 295 8453

BIELORRÚSIAGOMEL - POLCAR IMPEXT: +375 2327 76919 - F: +375 2327 76757MINSK - POLCAR IMPEXT: +375 1721 78785 - F: +375 1721 75632MINSK - INTERIOR HALL DOMIARTT: +375 1725 96026 - F: +375 1725 96212

BOLIVIASANTA CRUZ - ELEMENTO DISEÑO & ARQUITECTURAT: +591 3 364 7313 - F: +591 3 347 6226

BOSNIA Y HERZEGOVINACITLUK - BROTIS d.o.o.T: +387 633 21500 - F: +387 366 50950SARAJEVO - LUK d.o.o.T: +387 33 777 888 - F: +387 33 777 889BANJA LUKA - LUK d.o.o.T: +387 51 379 261/262 - F: +387 51 370 877BIJELJINA - LUK d.o.o.T: +387 55 228 100 - F: +387 55 228 101

BRASILPARANÁ - CAMPO LARGO - PORCELANOSA BRASIL REVESTIMENTOS LTDAT: +55 (41) 3392 1500 - F: +55 (41) 3392 1400SAO PAULO - TELHANORTE - Saint GobainT:+55 11 2139 9650 9655 F:+55 11 2139 9655 BULGARIABURGAS - ELIS G.T: +359 56 842 849PETRICH - NIKMART: +359 886 321 111 - F: +359 745 665 03SANDANSKI - NIKMART: +359 888 143 313SOFIA - NIKMART: +359 2 868 93 95 SOFIA - NIKMART: +359 888 143 313SOFIA - ELIS-GE EOODT: +359 2 860 60 60VARNA- ELIS-GE EOODT: +395 52 500 555

CAMBOYAPHNOM PENH - UY HOUT MODERN CERAMIC TILEST: +855 23 210658 - F: +855 11 307777

CAMERÚNDOUALA - NOUVEAUX AFFAIRES S.A.R.L.T: +237 33 92161 - F: +237 34 32917

CANADÁBRITISH COLUMBIA:VANCOUVER - FONTILE DISTRIBUTORST: +604 683 9358 - F: +604 683 6758NEW BRUNSWICK:MONCTON - DOMINION TILE & SUPPLIEST: +506 857 8906 - F: +506 857 4149ONTARIO:WOODBRIDGE - STREAMLINE SALES & MARKETING INC.T: +905 850 1508 - F: +905 850 1509

CHILESANTIAGO DE CHILE - BUDNIK HERMANOS S.A.T: +562 398 0100 - F: +562 212 3058

CHINABEIJING - PO YICK BUILDING MATERIALS CO. LTDT: +86 10 8527 1313 - F: +86 10 6422 9976CHENGDU - DE HUA SANITARYWARET: +86 28 8775100181 - F: +86 28 8774721681CHONGQUING - YAO CHENG BUILDING MATERIALST: +86 23 86358360 - F: +86 23 86357182 DALIAN - PO YICK CERAMIC TILEST: +86 411 8230 1911 - F: +86 411 8230 1911FUZHOU - PO YICK CERAMIC TILEST: +86 591 8805 5823 - F: +86 591 8805 5823GUANGZHOU - PO YICK DECORATION AND DESIGN (FAFA)T: +86 20 2200 8228 - F: +86 20 8252 4902GUANGZHOU - PO YICK DECORATION AND DESIGN (MAFO)T: +86 20 8071 8223- F: +86 20 8701 8226HAIKOU - XIN HUA XIN BUILDINGS MATERIALST: +86 898 6532 2417 - F: +86 898 6533 4893HANGZHOU - MING OU BUILDING MATERIALST: +86 571 8658 2691 - F: +86 571 8658 2691KUNMING - BE NEW FORM BUILDING MATERIALST: +86 871 466 9550 - F: +86 871 466 9550QUINDAO - TOLI SPACE MATERIALST: +86 532 80995657 - F: +86 532 80995657SHANGHAI - PO YICK DECORATION AND DESIGNT: +86 21 6438 3735 - F: +86 21 6428 1607SHENYANG - PO YICK CERAMIC TILEST: +86 24 8563 7137 - F: +86 24 8563 7137SHENZHEN -PO YICK BUILDING MATERIALS (HONGHU LU)T: +86 755 2562 0359 - F: +86 755 2550 5297SHENZHEN - PO YICK BUILDING MATERIALS (BAILIMA)T: +86 755 8240 7728 - F: +86 755 8240 7738TIANJIN - OU LIN HUI BUJILDING MATERIALST: +86 22 23528765 - F: +86 22 88277023WENZHOU - MING HOME INTERNATIONAL MATERIALS CO. LTD

T: +86 577 8872 8111 - F: +86 577 8971 2066WUHAN - HENG HUI BUILDINGS MATERIALST: +86 27 8388 9169 - F: +86 27 8398 4795XIAN - WEI YANG BAO LU SHA BUILDINGS MATERIALST: +86 29 8612 2404 - F: +86 29 8612 2404XIANMEN - PO YICK CERAMIC TILEST: +86 2952 3755123 - F: +86 591 88055823

CHIPRELIMASSOL - THE ENGINEERING AND COMMERCIAL ASSOCIATION (EKA)T: +357 2585 4444 - F: +357 2585 4545GIRNE - MEPAS LTDT: +9039 28152964 - F: +9039 28155651

COLOMBIA BOGOTÁ - PROSEINT: +57 743 5566BOGOTÁ - DECORCERAMICA T: +57 1 625 4439- F: +57 1 615 2554T: +57 1 742 7690- F: +57 1 742 3983T: +57 1 747 0555- F: +57 1 621 1197CALI - DECORCERAMICAT: +57 2 330 1124 - F: +57 2 330 1997T: +57 2 668 9535 - F: +57 2 661 8063MEDELLIN - DECORCERAMICA T: +57 4 604 5888- F: +57 4 604 5888BARRANQUILLA - D.I.M.C.E. T: +57 5 300 6208 - F:+57 4 604 5888

CONGO, REPÚBLICA DEMOCRÁTICAKINSHASA - SOCIETE PANACHET: +243 884 1677 - F: +243 983 13893

COREA DEL SURSEOUL - T&S TRADING CO. LTDT: +82 2 5163123 - F: +82 2 5163009

COSTA RICASAN JOSÉ - FERNANDEZ AGUILAR S.A.T: +506 2222 5674 - F: +506 221 9952

CROACIADUBROVNIK - OTP DUBROVNIKT: +385 20 412478 - F: +385 20 311521POREC - SPINAT: +385 52 451 348 - F: +385 52 434 005PULA - SPINAT: +385 52 219 002 - F: +385 52 219 118RIJEKA - SPINAT: +385 51 741 300 - F: +385 51 741 298SPLIT - CREDO CENTART: +385 21 476 333 - F: +385 21 476 332SPLIT - SPINAT: +385 21 668 991 - F: +385 21 668 992VARAZDIN - SPINAT: +385 42 303 707 - F: +385 42 303 709ZAGREB - SPINAT: +385 13 492 552 - F: +385 13 492 560

DINAMARCAGLOSTRUP - MOSAIKHJORNETT: +45 43 633 900 - F: +45 43 663 857ODENSE M - DANESP FLISE KOMPAGNIET APST: +45 66 173 221 - F: +45 66 173 821COPENHAGUEN S - GENESTHO APST: +45 53 354 242

ECUADORGUAYAQUIL - ARKETIP’S CA T: +593 422 467 52 - F: +593 422 403 96QUITO - ARKETIP’S CA T: +593 422 498 39 - F: +593 225 573 99

EGIPTOEL CAIRO - MAHGOUB TRADING & IMPORTINGT: +20 2 57 12 565 - F: +20 2 57 39 344

EMIRATOS ÁRABES UNIDOSABU-DHABI - GALAXY BUILDING MATERIALS TRADINGT: +971 2 632 0333 - F: +971 2 632 2242

ESLOVAQUIABRATISLAVA - CERSA DOOT: +4212 44442833 - F:ESLOVENIALJUBLJANA - KEOR d.o.o.T: +386 1 542 14 86 - F: +386 1 542 14 88MARIBOR - KEOR d.o.o.T: +386 2 480 54 15 - F: +386 2 471 06 33MARIBOR - MAVI d.o.o.T: +386 2 23 50 316 - F: +386 2 23 50 312

ESTADOS UNIDOSCALIFORNIA:ANAHEIM - PORCELANOSA ANAHEIMT: +1 714 772 3183 - F: +1 714 772 9851SAN FRANCISCO - PORCELANOSA SAN FRANCISCOT: +1 415 593 7763 - F: +1 714 772 985SAN FRANCISCO - PORCELANOSA WEST HOLLYWOODT: +1 310 300 2090 - F: +1 310 300 2095SAN JOSE - PORCELANOSA SAN JOSET: +1 408 467 9400 - F: +1 408 467 9410BEVERLY HILLS - PORCELANOSA BEVERLY HILLS

T: +1 714 772 3183 CONNECTICUT:RIVERSIDE - PORCELANOSA RIVERSIDET: +1 203 698 7618 - F: +1 203 698 7619FLORIDA:MIAMI - PORCELANOSA MIAMIT: +1 305 715 7153 - F: +1 305 592 6999POMPANO BEACH - PORCELANOSA POMPANO BEACHT: +1 954 968 7666 - F: +1 954 968 7699GEORGIA:ATLANTA - PORCELANOSA ATLANTAT: +1 305 715 7153 ILLINOIS:CHICAGO - PORCELANOSA CHICAGOT: +1 312 204 6220 - F: +1 312 204 6240MARYLAND:ROCKVILLE - PORCELANOSA ROCKVILLET: +1 301 294 8193 - F: +1 301 294 8194NEW JERSEY:EAST BRUNSWICK - PORCELANOSA EAST BRUNSWICKT: +1 732 613 1915 - F: +1 732 613 9181PARAMUS - PORCELANOSA PARAMUST: +1 201 712 0556 - F: +1 201 599 1520RAMSEY - PORCELANOSA RAMSEYT: +1 201 995 1310 - F: +1 201 995 1960NEW YORK:NEW YORK - PORCELANOSA NYDCT: +1 212 252 7370WESTBURY - PORCELANOSA WESTBURYT: +1 516 338 0097 - F: +1 516 338 0098TEXAS:DALLAS - PORCELANOSA DALLAST: +1 214 377 2327 - F: +1 214 234 1340

EL SALVADORSAN SALVADOR-FERRETERIA DE LA CONSTRUCCIÓN FERCOT: 503 2510 8888 - F: 503 2510 8810

ESTONIATALLINN - PLAADIPUNKTT: +372 650 0720 - F: +372 650 0723

FILIPINASMANILA - CASA EUROPAT: +632 519 5818 - F: +632 553 2446

FINLANDIAVANTAA - LAATTAPISTE OYT: +358 9 878031 - F: +358 9 890832

FranceALSACE ET LORRAINE:VENDENHEIM - PORCELANOSA STRASBOURGT: +33 (0)388 209 212 - F: +33 (0)388 209 107WITTENHEIM - PORCELANOSA MULHOUSET: +33 (0)389 570 260 - F: +33 (0)389 570 261AQUITAINE:MERIGNAC - PORCELANOSA BORDEAUXT: +33 (0)556 124 848 - F: +33 (0)556 124 849BASSE NORMANDIE:MONDEVILLE - PORCELANOSA CAENT: +33 (0)231 820 000 - F: +33 (0)231 820 019BOURGOGNE:CHENÔVE - PORCELANOSA DIJONT: +33 (0)380 588 701 - F: +33 (0)380 588 595BRETAGNE:BREST - PORCELANOSA BRESTT: +33 (0)298 025 100 - F: +33 (0)298 415 401LORIENT - PORCELANOSA LORIENTT: +33 (0)297 875 000 - F: +33 (0)297 370 607SAINT GRÉGOIRE - RENNES - PORCELANOSA RENNEST: +33 (0)223 200 808 - F: +33 (0)299 369 688VANNES - PORCELANOSA VANNEST: +33 (0)297 460 292 - F: +33 (0)297 461 210CENTRE:CHAMBRAY LES TOURS - PORCELANOSA TOURST: +33 (0)247 808 787 - F: +33 (0)247 808 789OLIVET - PORCELANOSA ORLEANST: +33 (0)238 496 961 - F: +33 (0)238 496 969CORSE:AJACCIO - ART ET STYLEST: +33 (0)495 221 999 - F: +33 (0)495 231 547BIGUGLIA - ART ET STYLEST: +33 (0)495 589 898 - F: +33 (0)495 305 318FRANCHE COMTÉ:BESANÇON - PORCELANOSA BESANÇONT: +33 (0)381 416 363 - F: +33 (0)381 416 369HAUTE NORMANDIE:SOTTEVILLE LES ROUEN - PORCELANOSA ROUENT: +33 (0)235 650 655 - F: +33 (0)235 650 656ÎLE DE FRANCE:ARCUEIL - PORCELANOSA PARIS PORTE D’ORLEANST: +33 (0)149 121 257 - F: +33 (0)149 121 258COIGNIERES - PORCELANOSA COIGNIEREST: +33 (0)130 491280 - F: +33 (0)130 491328MONTIGNY - LES CORMEILLES - PORCELANOSA MONTIGNYT: +33 (0)139 311979 - F: +33 (0)139 311492VERT SAINT DENIS - PORCELANOSA MELUNT: +33 (0)160 565 747 - F: +33 (0)160 569 080LANGUEDOC - ROUSSILLON:NÎMES - PORCELANOSA NÎMEST: +33 (0)466 282 780 - F: +33 (0)466 282 781PÉROLS - PORCELANOSA MONTPELLIER

T: +33 (0)467 503 600 - F: +33 (0)467 501 121NORD - PAS - DE - CALAIS:LEZENNES - PORCELANOSA LILLET: +33 (0)20 340 340 - F: +33 (0)320 340 341PAYS DE LA LOIRE:BEAUCOUZÉ - PORCELANOSA ANGERST: +33 (0)241 738 100 - F: +33 (0)241 733 721GUERANDE - PORCELANOSA LA BAULET: +33 (0)240 607 273 - F: +33 (0)240 110 659LA CHAPELLE SAINT AUBIN - PORCELANOSA LE MANST: +33 (0)243 236 520 - F: +33 (0)243 240 512LA ROCHE SUR YON - PORCELANOSA LA ROCHE S/YONT: +33 (0)251 241 217 - F: +33 (0)251 242 399ORVAULT - PORCELANOSA NANTEST: +33 (0)228 073 950 - F: +33 (0)228 073 957POITOU - CHARENTES:CHASSENEUIL DU POITOU - PORCELANOSA POITIERST: +33 (0)549 119 787 - F: +33 (0)549 119 788PROVENCE - ALPES - CÔTE D’AZUR:AUBAGNE - PORCELANOSA MARSEILLET: +33 (0)442 624 330 - F: +33 (0)442 624 339MANDELIEU LA NAPOULE - PORCELANOSA CANNEST: +33 (0)493 470 645 - F:LES PENNES MIRABEAU (PLAN DE CAMPAGNE) - PORCELANOSA PLAN DE CAMPAGNET: +33 (0)442 466 120 - F: +33 (0)442 466 129RHÔNE ALPES ET AUVERGNE:CHAMPAGNE AU MONT D’OR - PORCELANOSA LYONT: +33 (0)478 668 151 - F: +33 (0)478 432 003

GEORGIATBILISI - COMODIN LTDT: +995 32 332960 - F: +995 33001368

GHANAROUGE INTERIORST: +233 (0) 302 734752 - F:

GRECIAATTICA - AURORA BAGNOT: +30 2105 594 520 - F: +30 2105 594 521HATZ GROUP - PORCELANA:ATHENS T: 210 810 53 30ATHENS T: 210 96 07 010ATHENS T: 210 5156 163ATHENS T: 2299063750LARISA T: 2410 619 999LEFKADA T: 2645 0 72100LOANNINA T: 26510 92735-7SERREST: 23210 36157THESSALONIKI - T: +30 2310 752 902 - F: +30 2310 753 564THESSALONIKI T: 2310 47 47 67THESSALONIKI T: 2310 672 340

GUADALUPE (ANTILLAS FRANCESAS)BAIE MAHAULT - GUADELOUPE CERAMIQUET: 590 266 261 - F: 590 266 412SAINT BARTHELEMY - ALMA QUINCAILLERIET: +590 276 494 - F: +590 276 738

GUATEMALAGUATEMALA- FERRETERIA DE LA CONSTRUCCION FERCOT: 502 2421 9000 - F: 502 2421 9009

GUAYANA FRANCESACAYENNE - ETS HENRY LE GACT: +594 302 719 - F: +594 300 713

HAITÍPUERTO PRINCIPE - EUROCERAMT: +509 250 57 14 - F: +509 250 57 15PETION VILLE -CERAMEXT: +509 712 88 33 - F: +509 256 53 44

HONG KONGHONG KONG - TAI YICK BUILDING MATERIALST: +852 23 956 670 - F: +852 23 957 831

HUNGRÍABUDAPEST - PORCAHUNGARY KFTT: +36 1 237 08 78BUDAPEST - PALATINUS FURDOSZOBASZALONOKT: +36 61-430-04-17 - F: +36 1-387-91-36DEBRECEN -PALATINUS FURDOSZOBASZALONOKT: +36 52-531-476 - F: +36 52 536-822EGER - PALATINUS FURDOSZOBASZALONOKT: +36 36-312-013 - F: +36 36-313-270GYÖNGYÖS -PALATINUS FURDOSZOBASZALONOK

Showrooms international


6160

T: +36 37-500-162 - F: +36 37-500-163MISKOLC - PALATINUS FURDOSZOBASZALONOKT: +36 46-412-256 - F: +36 46-412-741KECSKEMÉT - PALATINUS FURDOSZOBASZALONOKT: +36 76-412-272 - F: +36 76-509-204BÉKÉSCSABA -PALATINUS FURDOSZOBASZALONOKT: +36 66-328-432 - F: +36 66-328-432

INDIANEW DELHI - MARMO HOME PVT. LTD.T: +91 11 2321 6112 - F: +91 11 2321 8728

INDONESIABANDUNG - WISMA SEHATI (BANDUNG)T: +62 22 723 8515 - F: +62 22 723 8516 JAKARTA - WISMA SEHATI (MANGGA DUA)T: +62 21 6013303 - F: +62 21 6251221JAKARTA - WISMA SEHATI (POLIM)T: +62 21 7278 7711 - F: +62 21 7278 7878JAKARTA - WISMA SEHATI (BSD)T: +62 21 537 7278 - F: +62 21 537 7880SEMARANG - WISMA SEHATI (SEMARANG)T: +62 24 356 2233 - F: +62 24 356 2222SURABAYA - WISMA SEHATI (SURABAYA)T: +62 31 546 2868 - F: +62 31 546 1468IRÁNTEHRAN - FARBAR CO. LTD.T: +98 21 88 03 6364 - F: +98 21 88 03 8283

IRLANDACORK - ORIGINAL BATHROOM & TILEST: +353 0 214 310 000 - F: +353 0 214 310 003DUBLIN - TILESTYLE LTDT: +00 353 1 8555200 - F: +00 353 1 8557471POROSA TILE DISTRIBUTION LTDT: +353 (087) 0909997 - F: +353 (087) 6335551ISLA DE LA REUNIÓN (France)SAINT DENIS - RAVATE PROFESSIONNEL SAST: +262 904 024 - F: +262 904 057SAINT PIERRE - RAVATE PROFESSIONNEL SAST: +262 961 517 - F: +262 255 465

IRAKERBIL - AKSESUAR INSAAT ERBILT: +964 750 835 0055 - F: +964 66 210 1900

ISLANDIAREYKJAVIK - ALFABORG EHFT: +354 568 6755 - F: +354 568 1277

ISRAELISRAEL REPRESENTATIVE - YECHIEL TOPOLSKIT: +972 5 2327 6095 - F: +972 4 811 1729HAIFA - TOPOLSKI & CO Ltd.T: +972 4 904 0496 - F: +972 4 904 0455BNEY BRAK - HEZI BANKT: +972 3 616 6641 - F: +972 4 904 6643MODIIN - LEVY BROS CERAMICS IMPORTERS LTDT: +972 3 973 9977 - F: +972 3 973 9933RAANANA - AMOZI NAGAR IMP. MARK. OGEN LTD.T: +972 9 760 1501 - F: +972 9 741 1997RISHON LE ZION - NEGEV CERAMICST: +972 9 943 6676 - F: +972 9 6661JERUSALEM - BAR-AMI 1990 LTD.T: +972 2 531 3444 - F: +972 2 538 3740

ITALIAANDRIA - MIDIL-CERAMICHE S.A.ST: +39 08 835 66466 - F: +39 08 835 49260CORSICO - PORCELANOSA LOMBARDIA S.P.AT: +39 02 458 64310 - F: +39 02 458 64415SASSUOLO - PORCELANOSA S.P.AT: +39 05 368 06677 - F: +39 05 368 02184ROMA - PORCELANOSA ROMA S.P.AT: +39 06 888 9977 - F: +39 06 888 7056

JERSEYST. SAVIOUR - PASTELLA GROUPT: 01534 870167 - F: 01534 723199

JORDANIAAMMAN - AYMAN ABDALLAT & PARTNERS CO.T: +962 65 672 376 - F: +962 65 672 476

KAZAJISTÁNALMATY - TISACOT: +7 327 273 3848 - F: +7 327 258 1169ALMATY - NOELT: +7 3272 4214 47 - F: +7 3272 5016 42ALMATY - SHEBER-MARKET LTDT: +7 3272 4353 86 - F: +7 3272 4324 64STROYMART - KARAGANDAT: (3212) 563 333

KOSOVOPRISHTINA - N P KERASANT: +381 38 602 667 - F: +381 38 602 667

KUWAITSAFAT - HASSAN ABUL HASSAN SADIQT: +965 262 4466 - F: +965 265 1444

LETONIARIGA - TORMANIS UN PARTNERI

T: +371 784 5361 - F: +371 784 5360

LÍBANOLIBANO - GEAHCHAN GROUPT: +961 1480520 - F: +961 1496607

LIBIABENGHAZI - EL RAGUOBIT: 218 61 3370895 - F: 218 61 2237328TRIPOLI - EL RAGUOBIT: 218 91 3274885

LITUANIAALYTUS - IRIS LTDT: +370 315 55969 - F: +370 315 55968

MACEDONIASKOPJE - TE LINDI D.o.o.T: +389 2 2 602 628- F: +389 2 2 602638

MALTABIRKIRKARA - ROGER SATARIANO & SONS LTDT: +356 21 442 769 - F: +356 21 497 017

MALASIAKUALA LUMPUR - APEX CERAMICS CITYT: 603 4043 8333 - F: 603 4044 3339

MARRUECOSCASABLANCA - CERAMEXT: +00212 945 3646166 - F: +00212 522 395363CASABLANCA - SANITAIRE 2000T: +212 22 363 225 - F: +212 22 394 100MARRAKECH - AR’CHICT: +212 5 24302929 - F: +212 5 24335954RABAT - AR’CHICT: +212 5 37792197 - F: +212 5 37792202TANGER - FACENOR S.A.T: +212 39 941 910 - F: +212 39 945 445

MARTINICA (ANTILLAS FRANCESAS)LAMENTIN - JOSEPH COTTRELL S.A.T: +596 509 810 - F: +596 506 524

MÉXICOINTERLOMAS - PORCELANOSA MÉXICOT: (+55) 36 05 00 84 · (+55) 36 05 00 65 · (+55) 36 05 00 67TLALNEPANTLA - PORCELANOSA MÉXICOT: (+55) 26 20 04 62 · (+55) 26 20 09 58MÉXICO DF - PORCELANOSA MÉXICOT: (+55) 5831 7340

MOLDAVIACHISINAU - PLIMED (CASA MODERNA)T: +373 2 2501252/54/55/56 - F: +373 2 2716824CHISINAU - CASA MODERNAT: +373 22 810 260/810 201/810 202/810 207 - F: +373 22 810221

MONTENEGROBAR - VIP HOMEST: +382 304 100 - F: +382 340 900

NEPALKATMANDU - BAJRA & BAJRACHARYA ENT.T: +977 1 552 4851 - F: +977 1 552 4851

NICARAGUAMANAGUA - DECO CENTER - GRUPO IBERICA NICARAGUAT: +505 270 2121 - F: +505 277 0834

NIGERIALAGOS - VICTORIA ISLANDS-PN LIFESTYLET: +23 480 552 63043 - F: +23 480 222 38012

NORUEGAOSLO - FAGFLIST: +47 22 808 560

NUEVA ZELANDAAUCKLAND - TILECO LTDT: +64 9 573 5736 - F: +64 9 573 5737

PAÍSES BAJOSVENLO - PGN CERAMICA B.V.T: +32 (0)15 253366 - F: +31 (0)15 253367

PAKISTÁNKARACHI - S. ABDULLA & CO.T: +92 21 585 0490 - F: +92 21 585 0230

PANAMÁPANAMÁ - COCINAS ITALIANAS S.A. - SPAZIOT: +507 214 3756 - F: +507 264 2542

PERÚLIMA - CASSINELLIT: +51 14 513 712 - F: +51 15 612 757

POLONIABIALYSTOK - AKCESST: +48 85 6643436 - F: +48 85 6643434BIELSKO BIALA - ADARIT: +48 33 822 0449 - F: +48 33 822 0449

BIELSKO BIALA - P.H.U. CERAMEDT: +48 33 829 8770 - F: +48 33 829 8773BYDGOSZCZ - CERMAG POZNANT: +48 33 829 8770 - F: +48 33 829 8773CZESTOCHOWA - P.H.U. FUGAT: +48 343682944 - F: +48 343682944GLIWICE - ADARIT: +48 32 232 2155 - F: +48 32 232 2155GORZÓW - WLKPT: +48 95 721 41 08 - F: +48 95 721 41 08KATOWICE - ADARIT: +48 32 258 9574 - F: +48 32 258 9574KIELCE - EXCLUSIVET: +48 41 345 75 49KOLOBRZEG - CERMAG POZNANT: +48 94 355 18 88 - F: +48 94 355 18 80KONIN - STREFA ARCHITEKTAT: +48 63 243 31 14 - F: +48 63 243 30 97KRAKÓW - MAX FLIZT: +48 01 229 07060 - F: +48 01 229 07060LESZNO - CREMG POSNANT: +48 65 529 63 63 - F: +48 65 529 63 63LODZ - FUMINOT: +48 426373767LUBLIN - EGENT: +48 81 441 58 42 - F: +48 81 441 80 74OSTRÓW - WIELKOPOLSKI - CERMAG POZNAN T: +48 62 735 81 12 - F: +48 62 737 28 91POZNAN - CERMAG POZNANT: +48 616 616 161 - F: +48 618 302 378RADOM - CERAMIKA PRIMUST: +48 48 381 0287 - F: +48 48 381 0290RZESZÓW - F.H. BOZ S.A.T: +48 17 850 0315 - F: +48 17 850 0341SOPOT - AGENA SP. Z O.OT: +48 58 550 4235 - F: +48 58 550 5459SZCZECIN - STREFA ARCHITEKTAT: +48 91 434 00 48 - F: +48 91 434 00 48SLUPSK - GRESMAXT: +48 59 843 41 53WARSZAWA - WOIS SP Z.O.OT: +48 22 6127213 - F: +48 22 6127216WARSZAWA - GRESTONT: +48 022 720 5525 - F: +48 022 720 5524WARSZAWA - STREFA ARCHITEKTAT: +48 22 252 57 39- F: +48 22 252 57 39WROCLAW - CERMAG WROCLAWT: +48 717 820 021 - F: +48 717 820 031

PORTUGALPORTO - PORCELANOSA PORTO S.A.Rue Eng. Luis Delgado dos Santos 76, Apartado 1011T: +351 226 166 600 - F: +351 226 161 959LISBOA - PORCELANOSA LISBOAAv. Infante D. Henrique 19/20T: +351 21 831 3020 F: +351 21 831 3029VISEU - PORCELANOSA VISEUEdificio Paulo VI, Praça Paulo VI R/C Loja AT: +351 232 430 440 - F: +351 232 430 449

PRINCIPADO DE ANDORRAANDORRA LA VELLA - MATERIALS PIRINEUAvda. Tarragona, 20 T: +376 822 353

PUERTO RICOSAN JUAN-THE TILE SHOPT:+1787 775 2030 - F:+1787 707 0137GUAYNABO-THE TILE SHOPT: +1787 720 2030 - F: +1787 287 2030

QATARQATAR - UNITED SUPPLIEST: +974 46 85 164 - F: +974 46 85 165

REINO UNIDONORWICH - PORCELANOSA ANGLIAT: +44 01603 789 363 - F: +44 01603 789 375PETERBOROUGH - PORCELANOSA ANGLIAT: +44 01733 325 111 - F: +44 01733 384 003NOTTINGHAM - PORCELANOSA MIDLANDST: +44 0115 983 65 00 - F: +44 0115 983 65 65SOLIHULL - PORCELANOSA MIDLANDST: +44 0121 746 64 64 - F: +44 0121 746 64 65SOLIHULL - PORCELANOSA MIDLANDS - REGIONAL HEAD OFFICE AND DISTRIBUTION CENTRET: +44 0121 780 00 00 - F: +44 0121 780 00 99NEWCASTLE - PORCELANOSA NORTH EASTT: +44 0191 272 5224 - F: +44 0191 272 29 86MANCHESTER - PORCELANOSA NORTH WESTT: +44 0161 817 33 00 - F: +44 0161 817 33 01WARRINGTON - PORCELANOSA NORTH WESTT: +44 01925 237 807 - F: +44 0192 523 78 88EDINBURGH - PORCELANOSA EDINBURGHT: +44 0131 335 38 83 - F: +44 0131 335 38 84GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & DESIGN CENTER T: +44 0141 552 8110 - F: +44 0141 552 5883GLASGOW - PORCELANOSA SCOTLAND - SHOWROOM & HEAD QUARTERST: + 44 0141 533 1000 - F: +44 0141 533 1006CROYDON - PORCELANOSA SOUTH EASTT: +44 0844 481 8953 - F: +44 0844 481 8963FULHAM - PORCELANOSA SOUTH EASTT: +44 0844 481 8952 - F: +44 0844 481 8962

WATFORD - PORCELANOSA SOUTH EASTT: +44 0844 481 8951 - F: +44 0844 481 8961READING - PORCELANOSA SOUTH EASTT: +44 0844 481 8954 - F: +44 0844 481 8964SOUTHAMPTON - PORCELANOSA SOUTH EASTT: +44 0844 481 8956 - F: +44 0844 481 8966BRISTOL - PORCELANOSA WESTERNT: +44 0117 959 71 51 - F: +44 0117 959 71 55CARDIFF - PORCELANOSA WESTERNT: +44 0292 0465 166 - F: +44 0292 0465 156EXETER - PORCELANOSA SOUTH WESTT: +44 01392 215 552 - F: +44 01392 215 557DONCASTER - PORCELANOSA YORKSHIRET: +44 01302 30 47 13 - F: +44 01302 30 47 15LEEDS - PORCELANOSA YORKSHIRET: +44 0113 24 44 223 - F: +44 0113 24 34 024SHEFFIELD - PORCELANOSA YORKSHIRET: +44 0114 250 01 08 - F: +44 0114 255 22 65GLASGOW - CTD GLASGOWT: +44 0141 425 2666 - F: +44 0141 425 2662NEW CASTLE-UPON-TYNE - CTD NEWCASTLET: +44 0191 276 1506 - F: +44 0191 265 0663MANCHESTER - CTD DENTONT: +44 0161 337 3050 - F: +44 0161 337 3051LONDON - WORLD’S END TILEST: +44 0207 819 2100 - F: +44 0207 819 2101BIRMINGHAM - CTD KINGS NORTONT: +44 01214 338 787 - F: +44 01214 338 788NORWICH - CTD NORWICHT: +44 01603 775 300 - F: +44 01603 789 040KENLEY - CTD KENLEYT: +44 0208 668 3236 - F: +44 0208 660 6425

REPÚBLICA CHECABRNO - DESIGN BATH SE.T: +420 547 216 621 PRAGUE - DESIGN BATH SE.T: +420 22 984 951

REPÚBLICA DOMINICANASANTO DOMINGO - CARABELA S.R.L.T: + 1 809 544 2560 - F: + 1 809 541 0818SANTIAGO - CARABELA S.R.L. PORCELANOSAT: + 1 809 971 1234 - F: + 1 809 971 6728LA ROMANA - CARABELA S.R.L. T: + 1 809 556 3606/ 1 809 550 9006 - F: + 1 809 221 7416BÁVARO - CARABELA S.R.L. T: + 1 809 466 0020 - F: + 1 809 466 2006

RUMANIABACAU - SSAB IMPEXT: +40 234 513 957 - F: +40 234 518 436BACAU - DELTA DESINGT: 0372 710827BRASOV - DELTA DESINGT: 0372 710812 BUCAREST - SSAB IMPEXT: +40 214 113 009 - F: +40 214 120 097BUCAREST - DELTA DESINGT: 021 4934129BUCAREST - DELTA DESINGT: 0372 710802BUCAREST - DELTA DESINGT: 021 4112546BUCAREST - DELTA CONCEPT STORET: 0372 710808BUCAREST - DISENO-GLAMOUR DESIGNT: +40 31 22 93 210 - F: +40 31 22 93 215CONSTANZA - SSAB IMPEXT: +40 241 508 446 - F: +40 241 508 436CRAIOVA - SC MYDWAY IMPEX SRLT: +0040 722 285 029 - F: +0040 251 427 946IASI - DELTA CONCEPT STORET: 0350 416701- F: 0350 416701ORADEA - MAISON DESINGT: 0040 410 170PITESTI - DELTA DESINGT: 0372 710832PLOIESTI - DELTA DESINGT: 0372 710834ORADEA - MAISON DESINGT: +40 743 507 811 F: +40 259 410 170

RUSIABRYANSK - ESCOBART: +7 483 266 55 56 EKATERINBURG - DOM PLITKI TERRAT: +7 343 270 00 26 IRKUTSK - PIRAMIDAT: +7 395 248 31 13KALININGRAD - KERAMIKA & KERAMOGRANITT: +7 4012 370 460 - F: +7 4012 370 460KAZAN - ALAN VESTT: +7 843 262 34 19 KRASNODAR - BOMONDT: +7 861 210 26 83 - F: +7 861 234 10 75KRASNOYARSK - SIBLINET: +7 3912 75 20 45 MAKHACHKALA - T.D. MODERNT: +7 8722 67 65 69 MOSCU - ARTISANT: +7 495 742 40 40 - F: +7 495 937 52 19MOSCU - KERAMIKA ELIT

T: +7 495 724 18 18MOSCU - UNDERGROUNDT: +7 495 253 53 30 / +7 495 253 69 32MOSCU - ZODIAK KERAMIKAT: +7 495 730 97 97 MOSCU - INTERIER KERAMIKAT: +7 495 730 97 97 - F: NOVOSIBIRSK - ARTLUXT: +7 383 208 00 07 NOVOSIBIRSK - LAVERNAT: +7 383 334 02 40 PYATIGORSK - BOMONDT: +7 8 (8793) 975544ROSTOV NA DONU - BOMONDT: +7 863 266 50 34 - F: +7 863 268 73 39SAMARA - ANTAREXT: +7 846 267 39 34 - F: +7 846 267 39 33SOCHI - BOMONDT: +7 8622 61 23 17 ST. PETERSBURG - DOM LAVERNAT: +7 812 331 27 00 - F: +7 812 331 27 16ST. PETERSBURG - NOVUST: +7 812 320 69 50 - +7 812 320 68 81 - F: +7 812 328 17 93ST. PETERSBURG - INTERIER KERAMIKAT: +7 812 994 79 49 - F: STAVROPOL - VALENCIAT: +7 865 229 81 41 - F: +7 865 229 81 51SURGUT - DOM PLITKI TERRAT: +7 346 237 92 13TYUMEN - DOM PLITKI TERRAT: +7 345 241 09 61 - +7 345 241 04 74

SENEGALDAKAR - C.C.S.T: +221 33 849 04 04 - F: +221 33 823 13 10

SERBIABELGRADO - CERAMIC BY PORCEL.T: +381 11 3343026 - F: +381 11 3343297NOVI SAD - RACA KOMERCT: +381 21 451 534 - F: +381 21 472 0668

SINGAPURSINGAPUR - FERNANDO MARTIN BENITOT: +65 97801472 - F: +65 64621620

SIRIASIRIA - DAMASK ROSET: +963 11 334 6600 - F: +963 11 334 6601

SRI LANKACOLOMBO - NAVEEN CERAMIC (PVT)T: +94112325406 - F: +94112335637

SUDÁFRICACAPE TOWN - KENZAN TILEST: +27 21 5108310 - F: +27 21 5108317CAPE TOWN - TACTILET: +27 21 70249DURBAN - CLASSIC TRADINGT: +27 31 577 8382 - F: +27 31 577 7056T: +27 31 579 1900 - F: +27 31 579 1666JOHANESBURGO - CLASSIC TRADINGT: +27 11 656 0400 - F: +27 11 656 0403

SUDÁNKHARTOUM - ALMASSARRA FOR IMPORT EXPORTT: +249 183579399 - F: +249 183579499

SUECIABORAS - KAKELPALATZET I BORAS ABT: +46 (0)33 226 180 - F: +46 (0)33 226 181BROMMA - KAKELPALATZET I BROMA ABT: +46 (0)8 56 487 831 - F: +46 (0)8-988 620GÖTEBORG - KAKELPALATZET I BÄCKEBOL ABT: +46 (0)31 571 478 - F: +46 (0)31-571 477KATRINEHOLM - KAKELPALATZET I KATRINEHOLM ABT: +46 (0)8150-51 740 - F: +46 (0)150-51 775NYKÖPING - KAKELPALATZET I NYKÖPING ABT: +46 (0)155 200 999 - F: +46 (0)155-211 244UDDEVALLA - KAKELPALATZET I UDDEVALLA ABT: +46 (0)522 64 54 00 - F: +46 (0)0522-64 54HASSLEHOLM - STENMONTOREN I HASSLEHOLMT: +46 451 381 970 - F: +46 451 381 979MALMÖ - KERMA KAKEL ABT: +46 403 122 40 - F: +46 403 122 59MOLNDAL - KAKELPALATZET I MOLNDAL (CENTRAL)T: +46 (0)31 776 50 51 - F: +46 (0)31 86 39 62

SUIZABASEL - HG COMMERCIALE SPONAGELT: +41 61 337 50 20 - F: +41 61 337 50 01BERN - HG COMMERCIALE SPONAGELT: +41 31 99 622 88 - F: +41 31 99 622 01CRISSIER - SABAG SAT: +41 21 633 06 84 - F: +41 21 633 06 85GENEVE - SABAG SAT: +41 22 908 06 90 - F: +41 22 908 06 95LANDQUART - HG COMMERCIALE SPONAGELT: +41 81 300 00 15 - F: +41 81 300 00 16LOSONE - BAZZI PIASTRELLET: +41 91 792 16 02 - F: +41 91 792 18 02LUZERN - HG COMMERCIALE SPONAGEL

T: +41 41 367 60 90 - F: +41 41 367 60 99PURA - SACCOMANNO TRADE AGENCYT: +41 796 20 85 90 - F: +41 916 00 97 71SCHLIEREN - HG COMMERCIALE SPONAGELT: +41 1 732 44 44 - F: +41 1 732 44 00

TAILANDIABANGKOK - BOONTHAVORN CERAMIC (RATCHADAPISEK)T: +66 2 275 0029 - F: +66 2 275 2057BANGKOK - BOONTHAVORN CERAMIC CO. LTD (RANGSIT)T: +66 2 902 0171 - F: +66 2 902 0184BANGKOK - BOONTHAVORN CERAMIC CO. LTD(PINKLAO)T: +66 2 441 3075 - F: +66 2 441 4049BANGKOK - BOONTHAVORN CERAMIC CO. LTD(SUVARNABHUMI)T: +66 2 316 0429 - F: +66 2 316 0439BANGKOK - BOONTHAVORN CERAMIC CO. LTD(THONBUREE-PAKTHOR)T: +66 2 896 4471 - F: +66 2 896 4473BANGKOK - BOONTHAVORN CERAMIC CO. LTD (KASET NAVAMIN))T: +66 2 791 2777 - F: +66 2 943 9058PATTAYA - BOONTHAVORN CERAMIC CO. LTD (PATTAYA)T: +66 38 052 222 - F: +66 38 052 221HUAHIN - BOONTHAVORN CERAMIC CO. LTD (HUAHIN)T: +66 3252-2555// +668-5488-4144 - F: +66 3252 0141

TAIWÁNKAOHSIUNG - NEW CENTURY CONSTRUCTIONALT: +886 7 384 8834 - F: +886 7 387 1043TAINAN - NEW CENTURY CONSTRUCTIONALT: +886 6 261 3290 - F: +886 6 261 4373TAIPEI - NEW CENTURY CONSTRUCTIONALT: +886 2 3393 3123 - F: +886 2 3393 3138TAICHUNG - NEW CENTURY CONSTRUCTIONALT: +886 4 2372 8166 - F: +886 4 2376 2818

TÚNEZTÚNEZ - LIFE STYLET: +216 71 861 551 - F: +216 71 861 549TUNIS CEDEX - ABDENNADHER BRICOLAGE CENTERT: +216 71 725 777 - F: +216 71 760 046SFAX - ABDENNADHER BRICOLAGE CENTERT: +216 74 468 072- F: H SOUSSE - ABDENNADHER BRICOLAGE CENTERT: +216 73 224 424- F: HAMMAMET - ABDENNADHER BRICOLAGE CENTERT: +216 72 260 477- F:

TURQUÍAISTAMBUL - YÜTAST: +90 2 1227 44720 - F: +90 2 1227 20874ISTAMBUL - FANTASIA SERAMIK TICARETT: +90 0212 275 7511-272 85 48 - F: +90 212 272 2301

UCRANIAKHARKIV - EUROPAT: +380 482 37 85 40 - F: +380 57 771 4509KYIV - MILLENNIUM CONCEPTT: +38 044 2796060 - +38 044 2796010 - F: +38 044 5676554KYIV - CERAMIC FASHIONT: +38 044 281 07 27 - KYIV - CERAMIC FASHIONT: +38 044 246 79 79 KYIV - SVIT KERAMIKIT: +38 044 423 00 03LVIV - KERAM MISTOT: +38 32 293 98 89LVIV - SALON KARMENT: +380 32 244 40 55 F: +380 32 252 70 94ODESSA - FIRMENIY SALON PORCELANOSA GRUPOT: + 38 482 37 85 40 F: +380 482 423111DONETSK - DI-ARTT: +38 062 387 22 22 DONETSK - CERAMIC FASHIONT: +38 062 381 23 31DONETSK - NAUTILUST: +38 062 387 58 08

URUGUAYMONTEVIDEO - ACHERT: +598 2487 5630 - F: +598 2487 5630PUNTA DEL ESTE - ACHERT: +598 42 248 343T: + 598 42 250 869

VENEZUELACARACAS - PROSEINT: +58 212 239 2911 - F: +58 212 239 9460

VIETNAMHANOI - MILAN ARCHITECTURALT: 84 4 3791 3567 - F: 84 4 3791 3568HOCHIMINH CITY - MILAN ARCHITECTURALT: 84 8 5412 1819 - F: 84 8 5412 1820

YEMENAL-YAMAMAH GROUP ABO JALAL TAHER CORPORATION FOR GENERAL TRADET: +967 1 470 375 - F: +967 1 405 665



6362

butech building technology, s.a.Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2.5 · Apartado de Correos 372 · 12540 Villarreal, Castellón - ESPAÑA.

Teléfono (+34) 964 53 62 00 · Fax: (+34) 964 53 00 34 · E-mail: [email protected] · www.butech.es 122012

raised access floors - butech...this allows, in addition obtaining an excellent barrier against fire...

Documents