(rad) citycarb i filter class f7 acc. en rapid adsorption ... · citycarb i. 2018-02-26 advantages...

2
CityCarb I As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2018-02-26 Advantages Compact “2 in 1” filtration solution; particulate and molecular 100% incinerable Range of standard sizes Filter class F7 acc. EN 779:2012 Ideal for filtering low concentrations of most external and internal source pollutants Can be used to upgrade existing installations Rapid Adsorption Dynamics (RAD) Application:Particle and odour removal in offices, hospitals, airports etc Type:V-Bank Filter Frame:Polypropylene Media:Synthetic/Activated Carbon Dimensions:Filter front dimensions according EN 15805 Maximum airflow:1,25 x nominal flow Temperature max:50ºC RH. max:70% Mounting/Frames:Front and side access housings and frames are available A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration. CityCarb is the ultimate solution when a high performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames. Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of “Rapid Adsorption Dynamics” (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are released from both external sources (traffic fumes, power generation , industry) and internal sources (building construction and finish materials, wooden materials, carpets, cleaning agents etc). The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route. Type EN779 ISO16890 Dimensions WxHxD (mm) Air Flow/ pressure drop (m³/h/Pa) Media area (m²) Weight (kg) Initial eff. (%) ME (%)* Energy class CIZP-7I 0592/0592/0292 F7 ePM1 70% 592x592x292 3400/130 8 9,3 80 44 E CIZP-7I 0592/0490/0292 F7 ePM1 70% 592x490x292 2800/130 6,6 6,8 E CIZP-7I 0592/0287/0292 F7 ePM1 70% 592x287x292 1500/130 3,8 4,8 E ME%: Minimum efficiency ref. to EN779:2012 Energy Consumption, kWh/year: Calculated according to Eurovent Guideline 4/21-2014 Energy class: according to Eurovent RS 4/C/001-2017 www.camfil.com

Upload: others

Post on 21-Jun-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: (RAD) CityCarb I Filter class F7 acc. EN Rapid Adsorption ... · CityCarb I. 2018-02-26 Advantages •Compact “2 in 1” filtration solution; particulate and molecular •100% incinerable

CityCarb IA

s par

t of

our

pro

gra

m f

or c

onti

nuou

s im

pro

vem

ent,

Cam

fil re

serv

es t

he

righ

t to

chan

ge s

pec

ific

atio

ns

wit

hou

t not

ice.

20

18

-02

-26

Advantages

• Compact “2 in 1” filtrationsolution; particulate andmolecular

• 100% incinerable• Range of standard sizes• Filter class F7 acc. EN

779:2012

• Ideal for filtering lowconcentrations of most externaland internal source pollutants

• Can be used to upgradeexisting installations

• Rapid Adsorption Dynamics(RAD)

Application:Particle and odour removal in offices, hospitals,airports etcType:V-Bank FilterFrame:PolypropyleneMedia:Synthetic/Activated CarbonDimensions:Filter front dimensions according EN 15805Maximum airflow:1,25 x nominal flowTemperature max:50ºCRH. max:70%Mounting/Frames:Front and side access housings and frames areavailable

A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particlefiltration and gas filtration.

CityCarb is the ultimate solution when a high performance compact filter and a high performance molecular (gas, odour)filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames.Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of“Rapid Adsorption Dynamics” (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are releasedfrom both external sources (traffic fumes, power generation , industry) and internal sources (building construction andfinish materials, wooden materials, carpets, cleaning agents etc).

The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system orafter a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately afterremoval and disposed of by the appropriate route.

Type EN779 ISO16890Dimensions

WxHxD (mm)

Air Flow/pressure drop

(m³/h/Pa)

Media area (m²)

Weight (kg)

Initial eff. (%)

ME (%)*

Energy class

CIZP-7I0592/0592/0292 F7 ePM1 70% 592x592x292 3400/130 8 9,3 80 44 E

CIZP-7I0592/0490/0292 F7 ePM1 70% 592x490x292 2800/130 6,6 6,8 E

CIZP-7I0592/0287/0292 F7 ePM1 70% 592x287x292 1500/130 3,8 4,8 E

ME%: Minimum efficiency ref. to EN779:2012

Energy Consumption, kWh/year: Calculated according to Eurovent Guideline 4/21-2014

Energy class: according to Eurovent RS 4/C/001-2017

www.camfil.com

Page 2: (RAD) CityCarb I Filter class F7 acc. EN Rapid Adsorption ... · CityCarb I. 2018-02-26 Advantages •Compact “2 in 1” filtration solution; particulate and molecular •100% incinerable

CityCarb IA

s par

t of

our

pro

gra

m f

or c

onti

nuou

s im

pro

vem

ent,

Cam

fil re

serv

es t

he

righ

t to

chan

ge s

pec

ific

atio

ns

wit

hou

t not

ice.

20

18

-02

-26

www.camfil.com