r20 car dvr capture your journey - kaiser baas · • still photos can be taken using the down...
TRANSCRIPT
R20 CAR DVRCapture your journey
USER GUIDE
Languages English 4
4
Eng
lish
Community
Tech support: e: [email protected] w: www.kaiserbaas.com/support p: Australia 1300 302 306 p: New Zealand 0800 302 306 (business hours, AEST)
/kaiserbaasRegister this product for 12 month warranty:
www.kaiserbaas.com/register
Get product updates: www.kaiserbaas.com/updates
5
Eng
lishContents
Safety Precautions 6
What’s in the Box 7
Product Diagram 8
Setting up the R20 Car DVR 9
In Car Operation 10
Computer Connection 11
Interface 12
Settings 16
Software 18
Specifications 23
Frequently Asked Questions 24
Contact Us 25
6
Eng
lish
Safety PrecautionsBefore using your R20 Car DVR, please ensure you have read and understand all of the safety precautions below.
• Only use the provided power cables to charge the device.
• Do not expose the R20 camera to water, dust, oil and temperatures over 70˚c.
• Avoid leaving your R20 camera in direct sunlight for prolonged periods of time.
• Please do not attempt to adjust the camera settings while you are operating your vehicle.
PLEASE USE YOUR CAMERA WITHIN YOUR COUNTRIES ROAD LAWS. PLEASE CHECK YOUR LOCAL ROAD LEGISLATION BEFORE USE.
7
Eng
lishWhat’s in the Box
Please ensure the product package has all the following contents:
B
A
B
C
E
F
G
D
D
E
FG
C
R20 Car DVR
Mount
Micro USB Cable
User Guide
USB Car Charger
6 x Cable Management Clips
USB DC power cable
A
8
Eng
lish
Product Diagram1 Wide Angle Lens
2 Mounting Socket
3 DC Power Port
4 HDMI Mini Port 5 Micro USB Port
6 Up/Playback Button
7 Down/Photo Shutter Button 8 2.7” Display
9 Power/Back/Settings Button 10 OK/Event Recording Button 11 Reset Button 12 Micro SD Slot
8
1
2
11 1210
9
7
6
5
4
3
Front Side
Back
Bottom
9
Eng
lish
Side
Bottom
Setting up the R20 Car DVR
• Insert Micro SD card in the Micro SD card slot on the bottom of the camera.
• Camera will power up and start recording as soon as it receives power from the DC power connection (eg. when you start your car).
• Clean the area on your windscreen making sure desired placement is not blocking the drivers view.
• Attach the camera to the mount by sliding the camera connection from right to left along the mount connection until latched.
• Remove the protective skin from the 3M adhesive on the mount.
• Stick the adhesive to the inside of the front windscreen in the desired position, and press for 30 seconds to ensure that the camera is secure.
• Adjust the nut to ensure that the camera is correctly angled.
• Finally connect the R20 to power using the DC power cable and the USB car charge adaptor.
General:
Car set up:
10
Eng
lish
In Car Operation
• Once camera is set up and connected to DC power, the camera will automatically power on and start recording when the car is started.
• The car camera requires a class 6 or above Micro SD card (not included) with at lease 8GB of free space.
• The internal G sensor will register any bumps that could be accidents and registers them as an “Event”. These event files will not be recorded over by regular footage, these files need to be manually deleted from your SD card using the provided management software.
• Event recording can be manually triggered using the “OK” button during recording.
• Still photos can be taken using the Down button during recording.
• LDWS (Lane Departure Warning System) will warn the driver if they are not correctly in their lane. This feature can be adjusted through the Camera setting.
Note: For more information on the R20 interface please see section marked “Interface”.
11
Eng
lish
Computer Connection
• Download and install the supplied Motor+ software to your PC or Mac. The software can be found at: www.kaiserbaas.com/software/r30
• Follow the on screen set up guide.
• Connect your R20 camera to your computer using the supplied micro USB cable.
• Open the Motor+ software.
• Select if you want to review media on the camera (left icon), or your computer (right icon)
Note: For more information on software functions please see sec-tion marked “Software”.
12
Eng
lish
Interface Recording ScreenThis is the device’s main recording screen; this will show while your R20 is powered on and not in screensaver mode. The four on screen icons are selected by using their adjacent buttons.
!
Recording Screen Screen
1 Library/Playback
2 Photo Shutter Button
3 Settings
4 Event Record
5 Mode
6 Resolution
7 Microphone/Mute
8 GPS Signal
9 Photo Capacity
10 Event Capacity
11 Time
12 Power
1
2
3
4
5 6 7 8 9 10 11 12
13
Eng
lish
Library This menu is found by pushing the up button while at the recording screen. From here you can review your media, select either Event Recording, Loop Recording, or Photos by using the Up and Down buttons and the OK button to select.
Library Screen
1 Event recording
2 Normal Recording
3 Photos
1
2
3
14
Eng
lish
MediaOnce you have selected your media from the library screen, this screen gives the option of skipping to the next or previous file, or playing the currently selected file.
Media Screen
1 Previous
2 Next
3 Back
4 Play
1
2
3
4
15
Eng
lish
PlayerThis is the player screen, which is controlled by using the buttons on the side of the screen.
Player Screen
1 Rewind
2 Fast Forward
3 Stop
4 Pause
1
2
3
4
16
Eng
lish
Settings Camera
Video Resolution
Set the video resolution of Normal Looping Video and Event Protection Video
• 1296p: 2304x1296 P30
• 1080p: 1920x1080 P30
• 720P: 1280x720 P30
LDWS Turn on/off the LDWS function
• On
• Off
LDWS Calibration
Adjust the lane sensing upper line & bottom line
-
Recording Duration
Set the duration of each Normal Looping Video
• 3 min
• 5 min
• 10 min (Disabled in 1296p)
Driving
Screen Saver Duration
Set the amount of time you would like the screen saver to activate or turn off the screen saver function
• 30 sec
• 1 min
• 3 min
• Off
Screen Saver Type
Set the Screen saver type
• Display off
• Time
• Direction
17
Eng
lish
Microphone Turn on/off the microphone during recording
• On
• Off
Volume Adjust the Speaker volume of Voice/Sound/Playback
• 0-5
Sensitivity Set the sensitivity of the G-sensor to activate the Event Protection Recording or turn off this function
• High
• Mid
• Low
• Off
Voice Guide Turn on/off the voice prompt function
• On
• Off
General
Language Set the device language
• English
• German
• Spanish
• French
• Italian
• Russian
• Japanese
• Korean
• S. Chinese
• T. Chinese
Date/Time Set
Set the date and time of the device
YYYY/MM/DD/HH/MM
18
Eng
lish
Software Opening Screen
Opening Screen Screen
1 Camera media 2 Media Stored on Computer
1 2
19
Eng
lish
Media Manager
Media Manager Screen
1 Photo
2 Video
3 Event Video
4 Media Stored on Computer
5 Media
6 Camera Settings
7 General Settings
32 4
5
1 76
20
Eng
lish
Media Player
Media Player Screen
1 Speed
2 Compass
3 Player Controls
4 GPS position
5 Share to Social Media
6 Copy Video from Camera
4
5
6
1
2
3
21
Eng
lish
General Settings
General Settings Screen
1 Language Selection 2 Directory to Save Videos to Computer
1
2
22
Eng
lish
Camera Settings
Camera Settings Screen
1 Mute/Volume
2 Event Recording Sensitivity
3 Video Resolution Settings
4 Voice Guidance Settings
5 Video Duration Settings
1
2
3
4
5
23
Eng
lish
SpecificationsSensor 3MP CMOS
Lens 135° Wide Angle Lens
Still Image Resolution on Recording
3MP on 1296p/2MP on 1080p/1MP on 720p
Video Resolution 1296P: 2304x1296 P30/1080P: 1920x1080 P30/720P: 1280x720 P30
Video Format MPEG4 (H.264) .MOV File
Photo Format JPG
Display Panel 2.7” Color Display 16:9
Indicator LED 1 pc, 3 colors
GPS Sensor Yes
G Sensor Yes
TV Out Mini HDMI
USB Port Micro USB
Power DC in
Microphone Yes
Speaker Yes
Voice Language English, Mandarin
Operation Temperature -20 to 70 degree
Storage Temperature -40 to 80 degree
Dimension (L x W x H) 92 x 51 x 29.3mm
Weight 104g
24
Eng
lish
Frequently Asked Questions
Q. The image is blurry A. Try repositioning the camera. For best results, try to aim the camera through a section of the windshield that is not overly curved or angled as this can cause a blurring effect with footage.
Q. I can’t find the App in the App store A. Go to www.kaiserbaas.com/R20 using your mobile phone for a direct link to the app store in your country.
Q. My device will not record A. Please ensure that you have power connected to the camera using the supplied DC power cable and that you have a SD card inserted that is Cat 6 or above.
Q. My HDMI cable will not fit in the HDMI socket on the camera A. The socket on the side of the camera is a mini HDMI port and requires a mini HDMI adaptor (not included).
25
Eng
lish
Contact Us
Having trouble setting your R20 Car DVR up?
Please contact us. No question too big or small and we are more than happy to help.
Please visit: www.kaiserbaas.com/support
Or email: [email protected]
For further information please visit:
www.kaiserbaas.com
Tech support: e: [email protected] w: www.kaiserbaas.com/support p: Australia 1300 302 306 p: New Zealand 0800 302 306 (business hours, AEST)