r1, building -technical

Technical Specifications forProposed

Fresh Air Filtration Unit

TECHNICAL SPECIFICATION :The proposed Fresh Air Filtration Unit shall have the following construction features :

CASING :CASINGA. The housing construction shall be qualified and tested in accordance with the requirements ofDW/143 and certified to have a minimum rating of Class B at -1,000 Pa (4.02 w.g.) negativepressure. Certifications shall be available on request without exception.B. Housing: SAH shall have a corrosion resistant casing consisting of a rigid coated steel andstructural frame and 50 mm thick, insulated, double wall panels.C. The filter enclosure shall include side-access extruded-aluminum tracks to support the gas-phase filter cassettes. No ductwork / plenum installation or simple L track or angle support ispermitted.Access doors shall be provided on the all Sections to allow ease of access to, and installation andremoval of, all the filter stages.SPECIAL FILTER TRACKS FOR GAS PHASE / CHEMICAL FILTERS.

The chemical filtration cassettes shall be filled with UL Listed media only.The chemical filter section shall have extruded aluminum tracks to support the gas-phase filtercassettes by two upper and lower extruded aluminum sections to ensure no gas bypass.The SAAF track include two hard extruded-type strips on horizontal surface for easy slidingmovement. The vertical flange in the track shall fit into notches located on the gas-phase filtercassette and ensure that the cassette is properly positioned in the track.The hollow core tubular gasket shall be compressed by the action of installing the gas-phasecassette into the side-access tracks.No gas by-pass is allowed by track fitment arrangement within the unit Gas Phase Filtersection.The gas phase filters shall be as described in the following table and shall have a pressure drop,under operating conditions, no greater than those shown.

mehulHighlight

DESCRIPTION Medium Duty Cassette(MD)Nominal Size 6(h) x 24(w) x 18(deep)

Chemical media capacity 0.25 cubic ft.Rated airflow face velocity 500 fpm

Media Type UL classifiedSAAF Oxidant Media 0.31wg Pressure dropSAAF Blend Media 0.31wg Pressure dropHumidity Range 5 99% RH

Temperature Range -4F to 125F

EQUIPMENT DETAILSSr.No. Description Details1. Equipment Reference Filter Unit ( FU )2. Model SAH-1023. Air Flow ( L/s ) 17414. Unit Length 26005. Unit Width 1300

6. Unit Height(with base frame) 900

7. Quantity 1 No.

PRODUCT DETAILSa) Technical Details of Proposed Unitb) General Arrangement Drawingc) PRE-FILTER 1 : AAF Amair 300E

Class G4, EN779:2012d) PRE-FILTER 2 : AAF Varicel II

Class F8, EN779:2012e) CHEMICAL FILTERS : SAAF MD Cassette

Media : MA, Oxidant, GP Blend

f) FINAL FILTER : AAF Amair 300EClass G4, EN779:2012

Housing Construction

Housing Material

Pressure Gauge

Type Filter MERV rating Chemical Media Part NumberNominal Size (Height X Wide

X Depth) In. [mm]

AmAir 300E 7 N/A M140-202-86324 X 24 X 2

[594 X 594 X 44]

AmAir 300E 7 N/A M140-202-86124 X 12 X 2

[594 X 289 X 44]

Varicel II-MH 13 N/A M332-534-00824 X 24 X 4

[594 X 594 X 104]

Varicel II-MH 13 N/A M332-534-02124 X 12 X 4

[2594 X 289 X 104]

Chemical filter Bank #1 MD Cassette N/A SAAF Carb MA M400-018-0036 X 24 X 18

[153 X 610 X 457]

Chemical filter Bank #2 MD Cassette N/A SAAF Carb MA M400-018-0036 X 24 X 18

[153 X 610 X 457]

Chemical filter Bank #3 MD Cassette N/A SAAFOxidant M400-018-0106 X 24 X 18

[153 X 610 X 457]

AmAir 300E 7 N/A M140-202-86324 X 24 X 2

[594 X 594 X 44]

AmAir 300E 7 N/A M140-202-86124 X 12 X 2

[594 X 289 X 44]

Prefilter

Final Filter

SAH HOUSING SPECIFICATION

"Certified" Leak Proof Double Walled Insulation AHU Grade Construction

GI - Powder Coated

3EA, Magnehelic Pressure Gauge

Secondary Filter

AmAir

Extended Surface Pleated Panel Filters

Premium performance and construction

High loft media increases dust holding capacity

Wide selection range

Available with Intersept

Contoured Pleat Design

The unique design maximizes media usage and results in a more gradual rise in resistance and higher dust loading capacity.While the expanded metal support grid increases the stability of the pleat pack, thus reducing media flutter during operation.

The AmAir panel filters are constructed with AAF's totally unitized, double wall, die-cut box, moisture resistant beverage board frame. The media is bonded inside the frame at all points of contact, providing a sturdy, reliable construction that does not rack or deteriorate under difficult operating conditions.

The media pack support retainers, which are an integral part of the frame at both the air entering and leaving sides, increase filter rigidity. It helps maintain equidistant spacing between pleats for maximum dust holding capacity while minimizing resistance.

The AmAir panel filters are ideal for use as prefilter in combination with high efficiency filters. It helps extend the life of the higher efficiency filter from premature dust loading and replacement.

AmAir media is a special blend of non-woven cotton and synthetic fibers formed into a high loft mat for maximum media thickness to hold more dust.

High Loft Media Increases Dust Holding Capacity

The contoured shape of the pleats, which are formed by an expanded metal support grid (300E, 200E & 100E) permits air to exit freely through the bottom of the pleats, as well as along the entire depth. Dust collects uniformly over the entire media

and does not build up in the exit apexes as it would in V-shaped pleats.

High Loft Media Increases Dust Holding Capacity

Available with Intersept

The AmAir filter with Intersept antimicrobial is engineered to improve Indoor Air Quality (IAQ). Intersept acts as a preservative to ensure the integrity of the media throughout the life of the filter. EPA registered and environmentally safe, Intersept inhibits the growth of microorganisms documented to affect IAQ.

Wide Selection Range

Choose from three levels of filter performance.

Range Grade

E003

E002

E001

muimerP

laicremmoC

dradnatS

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

AmAir

Product Information

Nominal Sizes

12x24x1 305x610x25 100016x20x1 406x508x25 110016x25x1 406x635x25 140020x20x1 508x508x25 140020x25x1 508x635x25 175024x24x1 610x610x25 2000

142020242428

25-3025-3025-3025-3025-3025-30

90-9290-9290-9290-9290-9290-92

3.94.75.95.67.07.9

600650850850

10501200

------

------

------

------

-

29-0903-5241000115x016x5032x42x21 9.2 1.578.611052100629-0903-5291001115x805x6042x02x61 9.9 3.5012.741004105629-0903-5291004115x536x6042x52x61 12.5 7.6010.941057105829-0903-5212005115x016x7542x42x81 13.0 0.7113.961009100929-0903-5232004115x805x8052x02x02 12.2 4.6217.871057105829-0903-5232056115x016x8052x42x02 14.9 0.8215.01710012000129-0903-5232057115x536x8052x52x02 15.3 7.7219.01715712050129-0903-5282000215x016x0162x42x42 17.6 0.01510.31120052002129-0903-52010001201x016x5034x42x21 12.8 0.973.018052100629-0903-52410011201x805x6044x02x61 13.9 8.01012.2121004105629-0903-52410041201x536x6044x52x61 17.4 5.31010.6121057105829-0903-52610051201x016x7544x42x81 19.3 2.41117.6141009100929-0903-52710041201x805x8054x02x02 18.2 9.21210.5151057105829-0903-52710571201x536x8054x52x02 22.7 1.61217.81510512050129-0903-52120002201x016x0164x42x42 27.0 4.91511.32810052002129-0903-52620052201x536x7374x52x92 33.4 2.42819.823205130051

-----

(W x H x D)Rated Air Flow Capacity

(CFM)

(sq. ft)

300 FPM 625 FPM500 FPM

300EIntersept

PleatPerFilter

GrossMediaArea

(sq. ft)

200EPleatPerFilter

GrossMediaArea

(sq. ft) (%) (%)

100EPleatPerFilter

GrossMediaArea

Rated AverageEfficiency Arrestance

(Inches) (mm)

1). The actual face dimension of all filter sizes is 5/8" (16mm) under nominal face dimension.2). Width and height dimensions are interchangeable. All AmAir filters may be installed with the pleats either vertical or horizontal.3). All performance data is based on the ASHRAE 52.1-1992 test method. Performance tolerances conform to Section 7.4 of Standard 850-93.4). AmAir 300X, 300E, 200E and 100E filters are classified U.L. Class 2. Testing was performed according to U.L. Standard 900.5). Recommended final resistance: 1.0" W.G/250Pa for all models.6). Special sizes available upon request.

Note:

SpecificationMaximum Operating Temperature : 93C (200F)

srebif citehtnys dna nottoc nevow-noN : aideMSupport Grid : Welded wire mesh or expanded metal support grid

draob egareveb tnatsiser retaw ,llaw elbuoD : emarF

Efficiency vs Particle Size

Effic

ienc

y (%

)

0

10

30

40

50

60

70

80

20

0153.0 8.376.204.693.462.571.881.441.140.840.620.47

Particle Size (micron)Tested in accordance with ASHRAE test standard 52.2P

Performance Data

Pleats PerLiner Foot

Range

AmAir 300EIntersept

0.2014.0 --31154.005"10.1314.0 01144.05703.033"20.1211.0 0963.03652.003"4

AmAir 200E0.1111.0 8853.03652.082"20.109.0 0823.05522.052"4

AmAir 100E0.128.0 5983.08672.003"20.108.0 3833.05522.052"4

Rated Initial Resistance

(In. WG) (Pa)300 FPM



AAF has a policy of continuous product researchand improvement and reserves the right to change

design and specifications without notice.

American Air Filter Manufacturing Sdn. Bhd.Lot 6, Jalan Pengapit, 15/19,Seksyen 15, 40000 Shah Alam,Selangor, Malaysia.Email: [email protected]: www.aafasia.com

Tel: +603 5039 7777 / Fax: +603 5511 8633

ISO 9001:2000 & ISO 14001:2004 Certified

2009 AAF MalaysiaAmAir-03-MAL/DEC 09

mehulHighlight

mehulHighlight

VariCel llExtended SurfaceMini-Pleat Filters Featuringthe Slim Line Design

VariCel llwith Intersept

IAQ Engineered Media withIntersept

Better Air is Our Business R

mehulHighlight

mehulHighlight

Extended Surface Mini-Pleat Filters

Slim Line, Mini-Pleat Design Lowers Operating Costs

Engineered For A Variety of Applications

Available In Three Efficiencies - 90-95% (MERV 15),80-85% (MERV 14), 60-65% (MERV 11).

True High Efficiency Filters - Only 4" Thick Media Pack

VariCel II Filters are only one-third as deepas typical competitive filters.

*Except for aluminum strip on side access models

VariCel II andVariCel II with Intersept

Intersept EPARegistration No. 43670-1 Intersept EPAEstablishment No. 58260-GA-001

Designed for high performance under both normal and difficultoperating conditions, VariCel II and VariCel II with Intersept areappropriate for general HVAC and applications operating withvariable air volume, turbulent airflow, and high humidity. Thecombination of durable construction and high efficiency also makesVariCel II ideal for specialized systems such as diffusion filters inpaint booths and prefilters in cleanrooms.

Unique Combination of High Performance and Cost-Saving Features

High efficiency filtration

Available with Intersept in 90-95%, 80-85% and 60-65% efficiencies

Broad range of applications

Rigid construction holds up in difficult operating conditions

Microglass paper with water repellent binder

Easy handling, installation, and removal

Easy disposal

Slim Line packaging reduces shipping costs and storage space

High Efficiency and Low Resistance ReduceOperating Costs

Savings For New or Existing Installations

Indoor Air Quality

Easy Disposal VariCel II M & MH

VariCel II filters with Intersept are engineered to improve IndoorAir Quality (IAQ). Intersept acts as a preservative to ensure theintegrity of the media throughout the life of the filter. EPA registeredand environmentally safe, Intersept inhibits the growth ofmicroorganisms documented to affect IAQ.

Unitized Construction Adds Strength, PreventsLeakageTwo mating die cut boxes are bonded together, forming a doublewall around the perimeter of the filter. The mini-pleat media pack isbonded inside the double wall. The double-walled, foil laminatedframe prevents leakage and increases rigidity.

The frame (cell side) is made of fiber board, with a specialingredient added to maintain its strength under high moistureconditions. A layer of foil is laminated to the outer surface to furtherenhance moisture resistance.

Heavy Duty Construction-High Performance in ToughOperating ConditionsFoil Laminated Fiber Board Frame Provides Strength,Moisture Resistance

The thinner depth and fiber board frame make disposal easy - theeasiest of any high efficiency filter. VariCel II filters are only onethird the volume of other high efficiency filters, significantly reducingthe contribution to landfills. With no metal components, they arealso suitable for incineration.*

Compact, Space-Saving PackagingThe Slim Line, mini-pleat design enables four VariCel II filters tobe shipped in a carton only 16 inches high, compared to mostcompetitive filters which are shipped only one per carton. Shippingcosts and storage space are significantly reduced.

VariCel II media is madeof microglass paper with awater repellent binder. Thefibers are formed withdual density construction,consisting of coarserfibers on the air enteringside and finer fibers onthe air leaving particlesto be collected throughout the full thickness of the media,substantially increasing dust holding capacity. The media is waterrepellent and can withstand intermittent exposure to water withoutaffecting filter performance.

Slim Line Design

Reduce space requirements for the filter section

Save on installed cost

Save on:Replacement filter costsShipping costsStorage spaceHandling and installation

Simplify disposal

Upgrade filter efficiency at economical cost

Converted from more costly, bulkier filters

Foil Laminated FiberBoard Frame

Double WallConstruction

Frame-to-FrameAdhesive

Media Pack Adhesive

Retainer-to-Pleat-TipAdhesive

Adhesive Bead Separator

Dual Density Media

Media Pack SupportRetainer

the media to separate the pleats and allow maximum airflow withminimum resistance. (B) Beads on adjacent pleats bond to form arigid media pack that maintains even pleat spacing as the dirt loadbuilds, even during turbulent airflow. Media pack support retainers,built into the die cut frame, are bonded to the pleat tips to furthersecure pleat spacing. Consistent pleat spacing provides evendistribution of airflow throughout the entire face of the filter,resulting in lower resistance, full use of the entire depth of themedia, and higher dust loading capacity.With this design, VariCel II has the capacity to retain the sameamount of media area, in a filter only one-third as deep, as filtersusing traditional corrugated aluminum separators. VariCel II filtershave twice the media area of 12" deep competitive cartridge-type,extended surface filters using high loft, fine glass fiber media.

Va r i Ce l I I s s l im l inedesign, providing minimumresistance with maximumdust loading capacity, lowersoperating costs. (A) Rows ofadhesive beads are applied11/4" apart on both sides of

A B

The VariCel II M & MH combine the efficiency and performance ofVariCel II media with AAFs unique interlocked metal header (MH)and cell side. These filters are ideal for environments whereexcessive turbulence and moisture are factors. Metal makes theVariCel II M & MH a logical choice for side-access systems.For more information, Please contact AAF salesperson.

New Installations

Existing Installations

COURSE FIBERS

FINER FIBERS

AIRFLOW

Air entering side

Air leaving side

Dual Density Media Increases Dust Holding Capacity

mehulHighlight

Tel: 03-5569 2633 / Fax: 03-5569 3633

No. 9 (Lot 136), Jalan Juru Ukur U1/19,Hicom-Glenmarie Industrial Park, 40150,Shah Alam, Selangor Darul Ehsan, Malaysia.www.aafasia.com

ISO-9001 Certified Firm

2005 AAF MalaysiaVCII-01-MAL/MAY06

AAF has a policy of continuous product researchand improvement and reserves the right to change

design and specifications without notice.


VariCel ll Product Information

Performance Data

500 2000 .75 1.5 119 2624 x 24 x 4 23-3/8 x 23-3/8 x 3-3/41750 .75 1.5 103 2220 x 25 x 4 19-3/8 x 24-3/8 x 3-3/41650 .75 1.5 99 2120 x 24 x 4 19-3/8 x 23-3/8 x 3-3/41400 .75 1.5 82 1820 x 20 x 4 19-3/8 x 19-3/8 x 3-3/41500 .75 1.5 88 1918 x 24 x 4 17-3/8 x 23-3/8 x 3-3/41400 .75 1.5 82 1816 x 25 x 4 15-3/8 x 24-3/8 x 3-3/41100 .75 1.5 65 1416 x 20 x 4 15-3/8 x 19-3/8 x 3-3/41000 .75 1.5 58 1312 x 24 x 4 11-3/8 x 23-3/8 x 3-3/4500 .75 1.5 28 712 x 12 x 4 11-3/8 x 11-3/8 x 3-3/4

(1) Filters can be operated up to 125% of rated face velocity.(2) Width and height dimensions are interchangeable. VariCel II filters may be installed with the pleats either vertical or horizontal.(3) All performance data based on ASHRAE 52.2-1999 and ASHRAE 52.1-1992 test methods. Performance tolerances conform to Section 7.4 of ARI Standard 850-93. For maximum service life, VariCel II

filters should always be operated with a prefilter.(4) The final operating resistance shown is typical of systems currently in operation. Filters can be operated to a higher or lower final resistance without materially affecting filter efficiency; however, dust holding

capacity will be reduced if the filters are changed at a lower final resistance.(5) VariCel II filters are shipped four per carton.

(1) Rated FilterFace Velocity

(FPM)

(2) Nominal Size(Inches)

(W x H x D)

(2) Actual Size(Inches)

(W x H x D)

(3) Rated AirFlowCapacity(CFM)

(3) Rated InitialResistance(In W.G.)

(4) RecommendedFinal Resistance

(In W.G.)

Gross MediaArea

(Sq.Ft.)

ShippingWeight

(Lbs. Per Carton)

Initial Resistance vs. Filter Face Velocity Efficiency vs. Particle Size

Filter Face Velocity (FPM)

Initia

lRes

istan

ce(In

.W.G

.)

%Fr

actio

nalE

fficien

cy

0125 250 375 500 625

.10

.20

.30

.40

.50

.60

.70

.80

.90

1.00

0

20

80

60

40

10

70

90

50

30

100

.2 .4 .6 .8 1 2 4 6 8 10Particle Diameter (micrometers)

Tested in accordance with ASHRAE Test Standard 52.2-1999.

VariCel II andVariCel II with Intersept

(3)90-95% AVERAGE EFFICIENCY (MERV 15) - Available with Intersept


(3)80-85 AVERAGE EFFICIENCY (MERV 14) - Available with Intersept


(3)60-65% AVERAGE EFFICIENCY (MERV 11) - Available with Intersept

All VariCel II filters are classified U.L. Class 2. Testing was performed according to U.L. Standard 900 and CAN 4-S111.Underwriters Laboratories Classification:

150F (66C)For product information on VariCel II M & MH, request bulletin AFP-1-239.

Continuous Operating Temperature Limits:

90-95%80-85%

60-65%

90-95%80-85%

60-65%

500F

PMRa

ted

Face

Velo

city

mehulHighlight

mehulHighlight

mehulHighlight

Better Air is Our Business

SAAF Cassette Medium DutyModel SC:MD1-Inch V-Bank, 18-Inch Deep Gas Filtration Cassette

mehulHighlight

mehulHighlight

2SAAF Cassette Medium DutyModel SC:MD

1-Inch V-Bank, 18-Inch Deep Gas Filtration Cassette

Form and fit unlike any other 18"-deep, 1" gas filtration cassette

Improved fit and sealing, even when deployed in older cassette holding systems

Complete media utilization design

No-glue design eliminates problems from spills, off-gassing, bypass, and leakages

Multiple patents pending

Filled cassettes rated UL Class 2

AAF International proudly announces the SC:MD the best 1" V-bank, 18"-deep gas filtration cassette in the industry. AAF, the global leader and pioneer in air filtration, designs,manufactures, and performs QC compliance on these cassettes under ISO 9001:2000 and other applicable global quality certifications.

Design, Construction, and PatentsCreating the perfect SAAF Cassette presented unique challenges.The design needed to be such that it retrofits easily and performsbetter than older legacy cassettes in existing installations. The result the SC:MD which was conceived and designed by AAF Internationalsglobal engineering and design teams that span five continents.

High technology design tools were employed to validate the designand confirm better performance. Computerized Fluid Dynamics (CFD) modeling and performance tests confirm optimal design. The resulting design and construction surpasses any competitorscassettes in the market, while allowing users a truly better design with value-enhancing features.

The SC:MD is constructed from High Impact Polystyrene (HIPS) and comes pre-filled with SAAF Chemical Media.

SAAF-V - Patent pendingcomplete media utilization design eliminates the nosecavity typically created by legacycassettes. Nose cavities cocoonup to 30% of the chemical mediakeeping it isolated from airflowcontact at all times during the lifeof the cassette.

SAAF-T-Snap - Patent pendingdesign provides a high pressure,no-glue snap assembly. Thisrigid construction excludesharmful glues, solvents, or MEK'sfrom the manufacturing process.The SAAF-T-Snap design, unlikelegacy cassettes, has no see-through holes in the solid endplates. This allows for betterstructural integrity and eliminatesgas by-pass problems.

SAAF-T-Seal - Patent pendingplastic rivets secure the solid fillcaps at multiple points and allowcomplete security against burstsor leaks in normal usage.

Older legacy cassettes use stickers, labels, or lowfriction end caps that have highinstances of failure and chemicalmedia spillage.

SAAF-T-Screens - Patentpending precision engineeredSAAF-T-Screens allow optimizedapertures for better mediaretention and improved airflow dynamics.

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

3AerodynamicallyTapered Inlet Grid

Grid Cross-section

AirInlet

Rivets

Nominal Bed Depth

Bed Arrangement

SideGasket

Chemical Media Fill Cap

Butterfly Seal

Gasket Detail

Flat One-pieceSide

Airflow Velocity (in./s.)

222.8

150

100

50

50

Load case: 100Last Iteration/Step

(1) Velocity Magnitude -in./s.

AAFs patented cassette design offers improved airflow characteristics to ensure full media utilization.

Efficiency and PerformanceMost legacy cassette manufacturers state that their cassettes operate at >90% removal efficiencies. In reality, these efficiencies are notcassette efficiencies. In an installation, removal efficiency is dependenton the precise sealing of the chemical media delivery mechanism, i.e.the cassette with the cassette holding mechanism. Due to loosermanufacturing tolerances, testing of most legacy cassettes showsremoval efficiencies as low as 65%.

SAAF-V - Complete mediautilization design allows theSC:HD to outperform legacycassettes by 25%, as SAAFCassettes are the only cassetteswhich completely utilize allchemical media in the cassette.

SAAF-T-Butterfly Seal andSAAF-T-Groove - Designsprovide near absolute sealing,even in existing retrofitapplications.

SAAF-T-Track - System utilizesthe SAAF-T-Groove feature andprovides a compression fit thateliminates by-pass. The solid topand bottom rail system on SAAFCassettes eliminates yet anotherby-pass zone.

Cassette-To-Cassette MatingSeals - Smooth mating endpanels with no penetrations or outward turned flanges allow excellent cassette-to-cassete sealing.

SAAF-T-Snap - Unique design eliminates harmful glues, solvents, or MEK's andallows the entire SAAF ChemicalMedia in the cassette to be usedspecifically to overcome theexternal gaseous contaminants,not contaminants from thecassette itself. SAAF Cassettesare the ideal choice in cleanroomor high-precision applicationswhere zero off-gassing products are mandatory.

SAAF-T-Screens - Allowoptimized apertures for better media retention and better energy efficiencythrough improved aerodynamics and reduced pressure drop.

SAAF Cassettes perform and operate at the optimum gas filtrationefficiency due to various patent pending features:

mehulHighlight

Better Air is Our Business AAF has a policy of continuous product research

and improvement and reserves the right to changedesign and specifications without notice.

ISO Certified 9001:2000

2007 AAF InternationalGPF-1-108B MAY 07 VI 4M

10300 Ormsby Park Place Suite 600Louisville, Kentucky 40223-6169www.aafintl.com

Customer Service 888.223-2003 Fax 888.223.6500 [email protected]

SAAF Cassette Medium DutyModel SC:MD

ApplicationsSC:MD are used for gas removal applications in:

BioSafety

Odor control applications

Intermittent high concentration emergency gas removal

Medium and heavy industrial airflows

Medium and heavy cleanroom airflows

Medium and heavy pharmaceutical airflows

Airflows in institutional or commercial establishments

Airflows in museums, archives, or historical facilities

ASHRAE energy savings related applications

General Specifications and Application Parameters

Nominal Size6 x 24 x 18 inches (One SC:MD cassette is made up of two halvesfor easy lifting.)

Airflow Designed for 500 FPM (2.5 m/s) face velocity or 500 CFM (850 m3/h) airflow per cassette

Pressure Drop 0.31 in. w.g. @ 500 FPM (77 Pa @ 2.5 m/s) face velocity

Construction 100% recyclable/incinerable High Impact Polystyrene (HIPS) plastic

UL RatingClass 2 (when tested in accordance with UL Standard 900 and CAN 4-S11)*

Chemical Filter Bed Depth 1" (25mm) nominal

Chemical Media Capacity 0.5 cubic feet (0.014 m3)

Contains Chemical Media Various (as stated in submittal or as approved)

Gas Removal Efficiency True >99% over life of chemical media

Humidity Range 5% - 99% RH

Temperature -5F (-20C) to 130F (55C)

* Consult AAF sales representative for media/module combinations.

Res

ista

nce

(in.

w.g

.)

Airflow vs. Initial Resistance

Airflow Velocity ft3/min (FPM)

Airflow Velocity (m/s)

Performance Data

Disposal and Recycle Instructions1 Remove the SC:MD

cassette after use.

2 Empty out the SAAF Chemical media by removing the SAAF-T-Seal rivets.

3 Depending on the SAAF Chemical media in use, the chemical may be sent for regular landfill or disposed of according to applicable local, state, and federal regulations.

4 The empty SC:MD cassette can then be sent for plastic recycling or for incineration.

5 The empty SC:MD cassette is completely incinerable/recyclable.

0 50 100 150 200 250 300 350 400 450 500

1.0

0.75

0.5

0.25

0.0

0.254 0.762 1.27 1.778 2.286249

187

124

62

0SAAFOxidant

SAAFBlend Res

ista

nce

(Pa)

SAAFCarb

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight


SAAFCarb MA Media

Engineered MediaSAAFCarb MA engineered gas removal chemical media is designed to efficiently remove specific gaseous contaminants from airstreams. Target contaminants include: Hydrogen sulfide

Sulfur oxide

Nitrogen dioxide

Volatile Organic Compounds (VOCs)

The SAAFCarb MA media is manufactured exclusively for acidic corrosive environments. The media consists of cylindrical, porous pellets. The pellets are composed of pelletized activated carbon, suitably impregnated for the removal of acid gases.

Chemisorptive ProcessThe SAAFCarb MA media chemisorptive process removes the impure gases by adsorption, absorption, and chemical reaction. In this process, the gas is trapped within the pellet where a chemical reaction changes the gases into harmless solids, thereby mitigating the possibility of desorption.

Quality ControlSAAFCarb MA media undergoes the following quality control tests: Apparent Density

Ball-pan Hardness

H2S Gas Capacity Moisture Content

Pellet Diameter

Provides targeted contaminant removal capacity for acid gases

Provides extended equipment protection with infrequent media changeovers

Compatible for use in all carbon-based air filtration systems

Low pressure drop and high adsorptive capacity

UL Classification Class 1

UL

CLASSIFIED

mehulHighlight

mehulHighlight

mehulHighlight

Packaging Options and Application GuidelinesPackaging OptionsSAAFCarb MA media is packaged in one cubic foot containers, and 1,100 lbs. super sacks.

SAAFCarb MA media is also available packaged in SAAF cartridges, cassettes, and trays.

Application GuidelinesSAAFCarb MA media performs under the following application guidelines (actual capacities and efficiencies may vary): Temperature: -4 to 125F (-20 to 51C)

Humidity: 10% - 95% RH

Suitable for use in commercial and industrial systems with equipment face velocities from 50 to 500 FPM (0.25 - 2.5 m/s)

Refer to appropriate AAF documentation for additional information on contaminant gases.

Installation and Disposal RequirementsInstallationThe installers must use dust masks, safety goggles, and rubber gloves.

DisposalThe spent SAAFCarb MA media must be disposed of according to local, state, and federal guidelines.

SafetyWet activated carbon adsorbs atmospheric oxygen, causing low oxygen supply in enclosed areas or packed containers. This can be potentially hazardous for workers who enter these oxygen-depleted areas. Make sure that the workers adhere to the provincial and state safety guidelines.

SAAFCarb MA Media


2010 AAF MalaysiaSMMF - 01 - MAL / JAN 12

AAF MalaysiaAddress : Lot 6, Jalan Pengapit 15/19, Seksyen 15, 40000 Shah Alam,

Selangor Darul Ehsan, Malaysia.Tel : +603-5039 7777Fax : +603-5511 8633

AAF China - SuzhouAddress : No 116, Chang Yang Street SIP,

Suzhou 215126, P.R.China.

Tel : +86-512-6281 8288Fax : +86-512-6281 8388

AAF China - ShenzhenAddress : Fang Keng Road, Fu Ming Ind Area,

Ping Hu Town, Shenzhen 518111, P.R.China.

Tel : +86-755-2845 7069Fax : +86-755-2845 7648

AAF TaiwanAddress : No.19, Kuo Ti Rd., Ta Tso Li, Chu Nan Chen 35057, Miao Li Hsien,

Taiwan R.O.C.Tel : +886-37-483-521Fax : +886-37-480-738

AAF SingaporeAddress : 3 Bukit Batok Street 22,

Singapore 659582.

Tel : +65-6897 0383Fax : +65-6897 0328

AAF India - BangaloreAddress : No 149/150, Bandapura Village,

Marasoor Post, Anekal Taluk, Bangalore 562106, Karnataka, India.

Tel : +91-80-2780 8278Fax : +91-80-2782 0788


AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice.

Typical PropertiesApparent density : 0.6 g/cc 10% ASTM D2854 (mod)Carbon description : ImpregnatedCarbon raw material : CoalCTC (base carbon) : 60 wt % min ASTM D3467H2S gas capacity : 0.12 - 0.15 g H2S/cc media ASTM D6646Hardness : 95% minimum ASTM D3802Nominal diameter : 4 mm (3 mm media area available in some regions)Shape : Cylindrical pellet

Disclaimer: Typical properties are produced using AAF and industry standard test methods. They are listed for informational purposes only and not to be used as purchase specifications. Certificates of analysis are available for specific batches upon request. Please contact your local AAF sales representative for more information.


SAAFOxidant

Engineered Gas RemovalChemical Media

UL

CLASSIFIED

Engineered MediaSAAFOxidant engineered gas removal chemical media is designed to efficiently remove gaseous contaminants from airstreams.

Target contaminants include: Formaldehyde Hydrogen sulfide

Lower molecular weight aldehydes and organic acids

Nitric oxide

Sulfur dioxide

Manufactured as spherical, porous pellets, SAAFOxidant engineered media is composed of a combination of activated alumina, binders, and potassium permanganate. Potassium permanganate is applied uniformly during pellet formation and is distributed throughout the pellet volume to create a completely homogenous particle. This process provides the maximum amount of impregnant for chemical reaction and optimal performance.

Chemisorptive ProcessThe SAAFOxidant chemisorptive process removes the contaminant gases by adsorption, absorption, and chemical reaction.

In this process, the contaminant is trapped within the pellet where oxidation converts the contaminants into harmless compounds, thereby mitigating the possibility of desorption.

Quality ControlSAAFOxidant media undergoes the following quality control tests: Apparent Density

Crush Strength

Moisture Content

Pellet Diameter

Potassium Permanganate Content

Non-flammable and non-toxic

Accurate service life testing

Does not support bacterial and fungal growth

Removes and holds contaminants by chemical conversion

Patent pending high capacity formulation

UL Classified Class 1

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

mehulHighlight

SAAFOxidant


2010 AAF MalaysiaCRCI - 03 - MAL / JAN 12

AAF MalaysiaAddress : Lot 6, Jalan Pengapit 15/19, Seksyen 15, 40000 Shah Alam,

Selangor Darul Ehsan, Malaysia.Tel : +603-5039 7777Fax : +603-5511 8633

AAF China - SuzhouAddress : No 116, Chang Yang Street SIP,

Suzhou 215126, P.R.China.

Tel : +86-512-6281 8288Fax : +86-512-6281 8388

AAF China - ShenzhenAddress : Fang Keng Road, Fu Ming Ind Area,

Ping Hu Town, Shenzhen 518111, P.R.China.

Tel : +86-755-2845 7069Fax : +86-755-2845 7648

AAF TaiwanAddress : No.19, Kuo Ti Rd., Ta Tso Li, Chu Nan Chen 35057, Miao Li Hsien,

Taiwan R.O.C.Tel : +886-37-483-521Fax : +886-37-480-738

AAF SingaporeAddress : 3 Bukit Batok Street 22,

Singapore 659582.

Tel : +65-6897 0383Fax : +65-6897 0328

AAF India - BangaloreAddress : No 149/150, Bandapura Village,

Marasoor Post, Anekal Taluk, Bangalore 562106, Karnataka, India.

Tel : +91-80-2780 8278Fax : +91-80-2782 0788



Packaging Options and Application GuidelinesPackaging OptionsSAAFOxidant media is packaged in one cubic foot containers, and 1,100 lbs. super sacks.

SAAFOxidant media is also available packaged in SAAF cartridges, cassettes, and trays.

Application GuidelinesSAAFOxidant media performs under the following application guidelines (actual capacities and efficiencies may vary): Temperature: -4 to 125F (-20 to 51C)

Humidity: 10% - 95% RH

Suitable for use in commercial and industrial systems with equipment face velocities from 50 to 500 FPM (0.25 - 2.5 m/s)

Refer to appropriate AAF documentation for additional information on contaminant gases.

Installation and Disposal RequirementsInstallationThe installers must use dust masks, safety goggles, and rubber gloves.

DisposalThe spent SAAFOxidant media must be disposed of according to local, state, and federal guidelines.

SafetyMake sure that the workers adhere to the provincial and state safety guidelines.

Typical PropertiesApparent density : 0.8 g/cc 10%Crush strength : 50 N 20%H2S gas capacity : 0.07 - 0.10 g H2S/cc mediaKMnO4 Content : 8 wt % minimumNominal diameter : 4 mmShape : Sphere

Disclaimer: Typical properties are produced using AAF and industry standard test methods. They are listed for informational purposes only and not to be used as purchase specifications. Certificates of analysis are available for specific batches upon request. Please contact your local AAF sales representative for more information.

SAAFBlendTM GPEngineered gas removal chemical media

Non-flammable

Non-toxic and non-hazardous

Accurate service life testing

Inhibits bacterial and fungal growth

Does not support desorption

Easy disposal

Engineered MediaSAAFBlend GP engineered gas removal chemical media is designed to efficiently remove 99.5% of specific gaseous contaminants from airstreams. Target contaminants include:

Formaldehyde (CH2O) Hydrocarbons (VOCs) Hydrogen sulfide (H2S) Lower molecular weight aldehydes and organic acids Nitric oxide (NO) Sulfur dioxide (SO2)

SAAFBlend GP is produced from an equal volumetric mix of SAAFOxidant and SAAFCarb media. Manufactured of spherical and porous pellets, SAAFOxidant engineered media is composed of a combination of activated alumina and other binders. Potassium permanganate

is impregnated to this media combination in order to provide optimum adsorption, absorption, and oxidation of variousgaseous contaminants. Potassium permanganate is applied uniformly during pellet formation and is distributed throughout the pellet volume. This process provides the maximum amount of impregnate for chemical reaction and optimal performance. SAAFCarb media is manufactured of pelletized activated carbon media, composed of high quality virgin substrates in order to provide optimu adsorption for various gaseous contaminants.

Chemisorptive ProcessThe SAAFOxidant chemisorptive process removes the contaminant gases by adsorption and chemical reaction. In this process the gas is trapped within the pellet where oxidation changes the gases into harmless solids, thereby eliminating the possibility of desorption. SAAFOxidants engineering

allows this to be instantaneous, irreversible, and safe chemical reaction.

Quality ControlSAAFCarb Oxidant media undergoes the following quality control tests before being shipped:

Moisture content Hardness Bulk density Ash content Sodium thiosulfate content

Service AAF International will be pleased to offer you a maintenance contract for your chemical filter system. This includes sampling, removal of the used elements, cleaning of the installation and installation of new elements. Disposal in accordance with regulations and/or refilling is part of our scope.

mehulHighlight

mehulHighlight

SAAFBlend GP

GPF-2-180-IN-0811 2011 AAF International

Physical Properties SAAFCarb Fraction SAAFOxidant FractionMoisture content < 3 wt % acc. ASTM D2867 35% maximum acc. ASTM D2867Apparent bulk density 480 kg/m3 acc. ASTM D2854 800 kg/m3 acc. ASTM D2854Nominal pellet diameter 4 mm 3.175 mmCrush strength 35 - 70%Abrasion 4.5% maximumPotassium permanganate content 8% minimumBET rating, active area > 1000 [m_/g] acc. DIN 66132Abrasion resistance > 95 [%] acc. ASTM D3802Pore volume > 1 [cm3/g] acc DIN 66132CTC rating 60 wt % minimum acc. ASTM D3467Iodine number 1000 mg/g minimum acc. ASTM D4607Ash content < 12 wt % acc. ASTM D3472

Application Guidelines

Packaging OptionsContainers 1 ft3 (28 liter)Super Sacks 560 liter (20 ft3)Ready factoryfilled into SAAF Canisters, Cassettes, and Trays

PerformanceTemperature -20C to 50CHumidity 10-95% r.H.

ApplicationsAirflow From 40 m3/h to over 170,000 m3/hVelocity From 0.30 to 2.5 m/s NOTE: Refer to appropriate AAF documentation for additional information on contaminant gases.

PrecautionsInstallation Use dust masks, safety goggles, and rubber glovesMSDS Included in each shipmentDisposal The spent media must be disposed of according to local state, and federal guidelines.Safety Wet activated carbon adsorbs atmospheric oxygen, causing low oxygen supply in enclosed areas or packed containers. This can be potentially hazardous for workers who enter these oxygen depleted areas. Make sure that the workers adhere to the provincial and state safety guidelines.

Specifications


AAF-International B.V. P.O. Box 607800 AB EmmenThe NetherlandsTel: +31 591 686 911Fax: +31 591 686 936www.aafeurope.com

International AAF Offices: Emmen (NL), Glika Nera (GR), Brussels (B), Cramlington (GB), Oberhausen (D), Dubai (UAE), Helsinki (Fin), Istanbul (TR), Lisbon (P), Louisville, Ky (USA), Madrid (E), Mexico (Mex), Mozzate-Co (I), Paris (F), Bangalore (IND), Riyadh (KSA), Shah Alam (Mal),

Suzhou, Shenzhen (PRC), Singapore, Taiwan, Wr. Neudorf (A)

AAF Agents: Johannesburg (RSA)

0.0 Submittal Cover Page0.1, SUBMITTAL Index1.0, Technical Details of Proposed Unit2.0, Specified Offered.xlsx3.1, AAF Company Profile3.2, FZE Trade License, July 20143.3, FZE Chamber Membership Certificate, Aug 20144.1, RasGAS SAH 202-2F-4F-MD-MD-MD-2F4.1, Technical Details of Proposed Unit4.2, AmAir4.2, VariCel ll4.3, saaf cassette md gpf 1 108 pdf4.3.1, SAAFOxidantSAAFOxidant_f2.pdfSAAFOxidant_b_2

4.3.2, SAAF MASAAFCarbMA_f2 14-20-02MA.pdfSAAFCrabMA_b2.pdf

5.1, ISO 9001 2008 UKAS Certificate5.1, ISO 14001 Certificate5.2, AAF FZE, ISO Certificate, Valid Sept, 20166.1, Previous Approval Copies7.1, Gas Phase Installation List - Asia ME Sept 2013 - WWTP Highlighted7.2, Project Refernce List8.1, Gas Phase Capabilities GPF 1 100G8.2, AAF- Air Filtration Products Capabilities, afp 1 50014mon

r1, building -technical

Documents