r アウディ tt クーペ 3.2 クワトロ the finest …1...
TRANSCRIPT
1
※ご使用前にこの説明書を良くお読みになり十分に理解してください。Before beginning assembly, please read these instructions thoroughly.
R
THE FINEST RADIO CONTROL MODELS
取扱説明書INSTRUCTION SHEET
No.MZN77AUDI TT Coupe 3.2 QuattroMINI-Z Racer MR-015 RM Type / AWD MA-010 Type
MA-010
シャシーの準備Preparation of Chassis
2
2 x 5mm
2x5mm
●組立てに必要な物Tools : Must be prepared.
■カッターナイフ *Cutter Knife.
■ニッパー *Nippers
精密ドライバーか、 ドライバー(小)*A Phillips Screwdriver (Precision type or a small sized)■ + +
リヤマウントタイプ(RMタイプ)Rear Mount Type (RM Type)
シャシーを下記に合せます。Assemble the chassis as shown below.
モーター搭載位置Motor mounting position
付属のフロントボディマウントに交換してください。Replace the front body mount with the one included in the set.
フロントボディマウントFront Body Mount
TP ビスTP Screw
フロントボディマウントFront body mount.
シャシーChassis
ミニッツレーサー MR-015 RMタイプ用 / AWD MA-010用
MR-015
アウディ TT クーペ 3.2 クワトロ
MZN77-T01
ビスのしめすぎに注意。Caution : Do not screw-in excessively.
受信アンテナReceiver Antenna
受信アンテナを下図の寸法になるように加工してください。Bend the receiver antennaas shown below.
15mm
受信アンテナReceiver Antenna
ホイルベース(M)Wheelbase (M)
ホイルベース調整Adjustment of Wheelbase
90mm
90mm
ボディセット
BODY SET