Description

Main functions

Quick Reference CardPleaseconsultyourspausermanualforcompleteinfoonthefeaturesofyourspasystem.

in.k600™Advanced series of full-function keypads that give complete control to wet fingers!

Aeware's®newseriesofkeypadsfeaturesahighprofilewithalargeLCDdisplay,menu-driveninterfacethatletuserseasilycontrolallin.xm™functionsandprogrammingdirectlyfromspaside,creatingatrueanduniqueuserexperience.

Pumpicons

Lockicon

Time,temperature&messagedigits

Progressbaricon

MenutitleOperationMode

InformationDisplay

Statusicons

Lighticons

"Ok"Key

"Next"Keygoestomenupage

"Mode"Keyselectsmodeofoperation:Spa,Audio,Options

"Right"Multi-functionKey

"Minus"Keydecreasespar-ametersetting

"Left"MultifunctionKeygoesbackto

previousparametersettingorincreases

parametervalue

"Soft"Key1,2,3,4

"Plus"Keyincreasesparametersetting

Serviceicon

AM/PM(˚F/˚C)

• SelectSpatoviewSpamenu.

Starting Pump 1

• SelectPump 1toturnPump1on.•SelectPump 1repeatdelyto

controlpump1speeds.

(20minutebuilt-intimer)

Starting Light

•SelectLightkeytoturnlighton.•SelectLightkeyrepeatedlyto

controllightintensity.Afinalselectionturnslightoff.

(120minutebuilt-intimer)

Next menu page

•PressNext keytodisplaythenextpageinthespamenu.

Goestobloweroption

Thismenuallowscontrolofallpumps,blowerandspalight,aswellastheactivationoftheEco-nomyandStandbymodes.Everytimeadeviceison,itsanimatediconisdisplayed.Allpumpactivi-tycanbestoppedatoncebyactivatingtheStandbymode.

Starting Pump 2*

• SelectPump 2toturnPump2on.•SelectPump 2repeatdelyto

controlpump2speeds.

(20minutebuilt-intimer)

• PressModekeytodisplaythemodeSelectionwindow.

Starting Pump 3*

• SelectPump 3toturnPump3on.•SelectPump 3oncemoreto

turnpump3off.

(20minutebuilt-intimer)

Water temperature setting

• PressPlus/Minuskeytoselectwatertemperaturesetting.• PressOKkeyorwait5secondstoconfirmnewsetting.

The“SetPoint”promptindicatesthedesiredtemperatureNOTthecurrentwatertemperature.

*optionavailabledependinguponfactorysettings

Turning Economy on

Lowersthetemperaturesetpointofthespaby20˚F(11˚C).

•SelectEconomy toactivatetheEconomymode.

•SelectEconomy againtoover-rideeconomyprogramming(seespasetupsection).

Standby Mode

Stopsallpumpsatthesametimebyasimpleclickofabutton!

•SelectStandbytoactivate thismode.•SelectStandbytoagainto

resumenormaloperations.

SystemautomaticallyreturnstoNormalmodeafteracertainpe-riodoftime,unlesstheStandbymodehasbeenreactivated.SpalightwillflashforafewsecondsbeforetheexitofStandbymodeandrestartthepumps.The"Standby"messageisalsodisplayedduringStandbymode.

*Pumpwillstayturnedonifthere isarequestformoreheat.

Displaying time

• PressOkkeytodisplaythetime.•PressOkkeyasecondtimeto

gobacktowatertemperaturedisplay.

Viewing active progress bars

Aprogressbarisavisualindicatorofthetimeremainingbeforeadeviceisturnedoff.Onlyonebarisdisplayedatthetime.

•UseLeftorRightkeystovisualizetheprogressbarofeachactivateddevice.

Starting Blower*

•SelectBlowertoturnBloweron.•SelectBlower oncemoretoturn

bloweroff.

(20minutebuilt-intimer)

Programming

Setting filter cycles start time

Thedisplaywillshowthestartinghourpreviouslyset.

•Use(+)or(-)keytoselecthoursetting.

•UseRightkeytosetminutes.•Use(+)or(-)keytochange

minutes.•SelectNextarrowon

screenmenutogotothenextparameter:filtercycleduration.

Setting cycle duration

Herewesetavalueforthefiltercycleduration,inhoursandminutes.

•Use(+)or(-)keytosethoursetting.

•UseRightkeytosetminutes.•Use(+)or(-)keytochange

minutes.•SelectNextarrowonscreen

menutosavechangesandgotothenextparameter:filtercyclefrequency.

Setting filter cycle frequency

Herewesetthenumberoffilteringcyclesthatthesystemwillperfomperday.

•Use(+)or(-)keytoselectfrequencysetting.

•SelectEnteroptiononscreenmenutosavechangesandgotobacktospaoptionsmainmenu.

Setting Economy mode*

•SelectEconomy

Programming spa system

Toprogramthefiltercycle,youmustentertheseparameters:starttime,durationandfrequency.Duringafiltercycle,pumpsrunforoneminutetopurgetheplum-bing,thenPump1runsfortheprogrammednumberofhours.

•PressModekey•SelectOptionsmenu•SelectSpasub-menu•SelectFilteroption

Setting Economy start time

•SelectNextarrowonscreenmenutosavechangesandgotoeconomycyclestarthour.

•Use(+)or(-)keytosethoursetting.

•UseLeftkeytoaccessminutesoption.

•Use(+)or(-)keytosetminutes.•SelectNextarrowonscreen

menutosavechangesandgotothenextparameterstopeconomy.

Setting Economy stop time

•Use(+)or(-)keytosethoursetting.

•UseLeftkeytoaccessminutesoption.

•Use(+)or(-)keytosetminutes.•SelectEnteroptionon

screenmenutosavechangesandgotobacktospaoptionsmenu.

Setting maintenance reminder prompts

Thismenuallowsyoutoactivate/deactivateorsimplyresetthemaintenancereminderprompts.

•SelectReminder option

Turning reminders on/off*

•Use(+)or(-)keytoactivateordeactivateprompt(s).

•SelectNextarrowonscreenmenutosavechangesandgotonextmenuscreen.

Setting Economy status

•Use(+)keytoenabletheeconomymode,thedisplaywillshowOn.

•Use(-)keytodisableeconomymode,thedisplaywillshowOff.

*optionavailabledependinguponfactorysettings

Viewing spa warnings

Thewarningiconshowsuptopromptyoutoreviewactivewarningmessages.

Viewing spa reminders

Theremindericonwillshowuptopromptyoutoreviewactivemaintenancemessages.

Resetting prompt messages

•UseLeftorRightkeystoreviewonebyoneallactivemaintenancemessages.

•SelectEnteroptiononscreenmenutoresetmessageandviewnexttaskorgobacktomainmenu.

Spa warnings

Thismenuallowsforyoutoviewallactivewarningmessagesie:.hotwater.

•SelectWarningoption

Turning warnings on/off

•UseLeftorRightkeystoreviewallwarningmessages.

•PressModekeyagaintogobacktomainmenu.

Setting the time

•PressModekey•SelectOptionsmenu•SelectClocksetting

Setting hour settings

•Use(+)or(-)keytosethoursetting.

•UseLeftorRightkeystoaccessminutesoption.

•Use(+)or(-)keytosetminutes.•SelectEnteroptionon

screenmenutobacktokeypadmainmenu.

Setting keypad display options

Thissub-menuisusedtosetkeypaddisplaysettingssuchas:contrast,backlight,etc.

•SelectDisplayoptions

Adjusting contrast

•UseLeftorRightkeystoadjustdesiredlevelofcontrast.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Adjusting backlight

•UseLeftorRightkeystoadjustbacklightbrigtness.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Normal/Reverse display

•Use(+)or(-)keytoactivateordeactivatereversedisplay.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

To program keypad settings

•PressModekey•SelectOptionsmenu•SelectKeypadsub-menu

Display orientation (inverting)

•Use(+)or(-)keytoactivateordeactivatereversedisplay.

•SelectEnteroptiononscreenmenutobacktokeypadmainmenu.

Setting keypad audio options

Thissub-menuisusedtosetkeypadaudibleoptionssettingsuchas:keypadon(keybeep)andalarm.

•SelectSoundoptions

Kepad beep on/off

•Use(+)or(-)keytoactivateordeactivatereversedisplay.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Turning alarm sound on

•Use(+)or(-)keytoactivateordeactivatealarmsound.

•SelectEnteroptiononscreenmenutosavechangesandgobacktomainmenu.

Setting regional settings

Thissub-menuisusedtosetkeypadregionalsettingssuchas:language,selecttemperaturedisplayunitsandchooseaformatfortimedisplay.

•SelectRegionaloptions

Time setting

Other settings

9919-100713-B www.geckoalliance.com

Resetting keypad programmed values

•PressOktoresetbacktodefaultfactoryvalues.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information about spa

SpasoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information on heater software

HeatersoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information on keypad software

KeypadsoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Upgrading keypad software

•UseOkkeytostarttheupgradeofthesoftwareofthekeypad.

•SelectEnteroptiononscreenmenutobacktokeypadmainmenuandnotupgradethesoftwareofthekeypad.

Viewing information about the system

Toviewspaequipmentdatasuchas:system,heaterandkeypadsoftwareversion,toresetprogrammedsettingsandtoupgradekeypadsoftware.•PressModekey•SelectOptionsmenu•SelectInfosub-menu

Setting language

•Use(+)or(-)toselectfrom:English,FrançaisSpanish&Deutsch

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Temperature units

Watertemperaturecanbedisplayedin°For°C.

•Use(+)or(-)tochangesetting.•SelectNextarrowondisplay

tosavechangesandgotonextscreenmenu.

Selecting time format

•Use(+)or(-)tochangesetting.•SelectEnteroptionon

screenmenutosavechangesandgobacktokeypadmainmenu.

Security options

Partialkeypadlock:basicfunc-tionsofthesparemainaccessible(pumpandlightoutputs)butit'simpossibletochangethetemperatureSetPoint,ortoenterProgrammingmode.Fulllock:allkeysaredisabled.Whenthekeypadislocked,theiconwillbedisplayed.

•SelectSecurityoptions

Partial keypad lockout

•Use(+)or(-)keytoselect"Partial".

•SelectEnteroptiononscreenmenutobacktokeypadmainmenu.

Tounlockthekeypad:•SelectModekey•PressandholdOptionkeyfor 5seconds

Full keypad lockout

•Use(+)or(-)keytoselect"Full".•SelectEnteroptionon

screenmenutobacktokeypadmainmenu.

Tounlockthekeypad,pressandholdLightkeyfor5seconds.

System info