QUESTION EXC

ERPT

L E A ND

R O R A C H

E

F I C H A 9 6 2 0 7 7

ALWAYS EXAMINE THE TOOL FOR DAMAGES BEFORE USE

True

IT IS OK TO WEAR LOOSE CLOTHING, DANGLING OBJECTS AND JEWELLERY USING HAND TOOL

False

KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND SHARP EDGES

True

USE ONLY TOOLS AND EQUIPMENT IN GOOD CONDITIONS

True

IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM WHILE THE POWER TOOL IS RUNNING

False

IF ANY TOOL BREAKS OR MALFUNCTIONS, REPORT IT TO YOUR SUPERVISOR IMMEDIATELYTrue

BEFORE CONNECTING TO A POWER SOURCE, MAKE SURE THE POWER IS ON

false

SAFETY GLASSES SHALL ALWAYS BE WORN WHENEVER YOU ARE USING POWER HAND TOOL

true

THERE ARE SEVERAL TYPES OF POWER TOOLS, INCLUDING ELECTRIC, PNEUMATIC, HYDRAULIC

True

NEVER USE ELECTRIC TOOLS IN WET CONDITIONS

true

WHEN NOT IN USE, POWER TOOLS SHOULD BE DISCONNECTED

true

KEEP SAFE DISTANCE BETWEEN YOUR HANDS AND ALL MOVING PARTS OF THE POWER TOOL

true

DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT IS RUNNING

True

IT IS OK TO STARTLE SOMEONE WHO IS USING A POWER TOOL

False

USE SAFETY GUARDS EXACTLY AS THEY ARE SUPPOSED TO BE USED

True

WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH, ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE WRENCH AWAY FROM YOU

true

PLASTIC COVERED HANDLES ON WIRE-CUTTING PLIERS MAY BE USED TO CUT LOW-VOLTAGE LIVE ELECTRICAL WIREFalse

SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A CHISEL

False

WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN THAT THE TIP IS ALMOST AS THICK AND AS WIDE AS THE SLOT OF THE HEAD OF A SCREW

True

WHEN USING A HACKSAW, SAFETY GLASSES MUST BE WORN

True

WHEN YOU ARE FINISHED USING A HACKSAW, TENSION SHOULD BE EASED

True