Sodium hypochloride contains minor excess caustic means?Strength of NaOCl solution?What is our deterioration rate of NaOCL and how it is deteriorated?

Curve of residual chlorine and its associated definition?How do we find free chlorine?What is the specific gravity of sulphuric acid?What is the type of G1-2406 Sulfuric acid dosing pump? MOC of line?IC-412 for backwashing of sand-filters?What is the definition of high stressed cooling water system?How it is decided to give shock dosing of NaoCL?Non-oxidizing biocides are specific in nature how it is mention in manual that they kill all micro-organism?Datasheet of cooling water pumps?

Why MOC of impeller bronze? Why shaft is carbon steel?What is the sealing plan? What is the composition of bronze?

Are cooling water fans running on full rpm?What is the efficient method for the controlling of air mass flow VFD or Variable pitch?

As per supplier data cooling tower can handle heat load of 148 MW?Why we say it is under designed don’t we check it during commisioning?Where is standard for cooling tower capability test?BS4485 Part 2, 1988?Cold Water outlet temperature when once operating in Datasheet?How can we measure Drift losses other than by rule of thumb?What is the distance b/w point of pH addition and point of QT for Cooling Tower?What is the spill/over flow of sulfuric acid tank?

What is the chlorine content for NaOCl dosing system?Chloine consumption in biocide but with which chemicals/ reagent?