quality tools and machines drilling punching...

Quality Tools and Machines

DRILLINGPUNCHINGCUTTINGDEBURRING

2121212121USAUSAUSAUSAUSA

All over the world – www.alfra.us

Made in Germany for the USA

Index Drilling – Punching – Cutting – Deburring

Rotabest® Metal Core Drilling MachinesPage 4 - 25




Metal Core Drilling – TappingPage 28

Tool Holders/AdaptorsPage 26 / 41

Cutters HSS-Co4 - 37Cutters HSS-Co

Rotabest®Rotabest®RotabestMetal Core Drilling Machines



Metal Core Drilling Machines

TCT Cutters-Weldon ShankPage 38 - 39

TCT Cutters ALPage 40

Adaptors/ ExtensionsPage 42

Hydraulic Punching Units single-actingPage 43 - 48

Hydraulic Punching Unitsdouble-actingPage 49

Hydraulic PumpsPage 47- 49

Deburring Devices Page 53 - 59

TCT Cutters AL

Hydraulic Punching Units

Hydraulic Punching Units

Adaptors/ Extensions

Hydraulic PumpsPage 47- 49

Bevel Milling MachinePage 60 - 61

Deburring DevicesPage 62 - 65


Rotaspeed® Cutting Saw RS 230APage 70 - 73

355 (14“) Super Dry Cut SawPage 74

16“ Super Dry Cut SawPage 75

HSS-Bi-Metal Hole Saws/SetsPage 76 - 80

TCT-Hole SawsPage 81 - 85

TCT-Hole Saws MBS + MBS ProPage 86 - 89

Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92

Astroflex® Sabre Saw BladesSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95

Battery-packedcompact hydraulic punchPage 96 - 97

Puncher and Puncher SetsPage 98 - 103

Special PuncherPage 104 -

ALFRA – separates the tools from the toys 3

Deburring Devices Page 53 - 59

Bevel Milling MachinePage 60 - 61



Rotaspeed®Rotaspeed®RotaspeedCutting Saw RS 230APage 70 - 73

355 (14“) Super Dry Cut SawPage 74

16“ Super Dry Cut SawPage 75

HSS-Bi-Metal Hole Saws/SetsPage 76 - 80

Bevel Milling Machine

Rotaspeed®Rotaspeed®Rotaspeed

355 (14“) Super Dry Cut Saw

Dry Cut Saw

TCT-Hole SawsPage 81 - 85

TCT-Hole Saws MBS + MBS ProPage 86 - 89

Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92

AstroflexSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95

Battery-packedcompact hydraulic punchPage 96 - 97

Page 98 - 103

Special PuncherPage 104 -

Multi-Step Drills

Astroflex® Astroflex® Astroflex Sabre Saw BladesSabre Saw Blades

Puncher and Puncher SetsPage 98 - 103Puncher and Puncher SetsPuncher and Puncher SetsPage 98 - 103

Special Puncher

Battery-packedcompact hydraulic punch

TCT-Hole Saws MBS + MBS Pro

ALFRA – separates the tools from the toys4

PowerfulMotorswithhightorqueandarangefrom900to1800W,ergonomicdesign,superiortechnology.

Improvedmagneticadhesiondueto3 insteadof2coils.

Pressed-inbrassringsforanimprovedprotectionofthemagneticcoils.

Motorheightcontinuouslyadjustableontheslideforamaximumstrokeenlargement,whenusingtwistdrills,drillchucksandtappingattachments.

Rota-Quick®–quickchangearbor–problem-freechangeofcutter.Thedecisiveadvantagecomparedwithotherquickchangearbors:fitseverycommoncutterwithaWeldon-shank.

Durablekeyboardwithflatcable.Panelangled directlyinsightoftheuser.NoneedtofeelfortheON/

OFF-switch.Easyreachabilityofkeyboard,eveninnarrowU-beamsandH-beams.

Newlydesignedgear-housingwithintegratedmotorsupport.Withbuilt-inheightadjustmentbymeansofclampingjaws–thereissimplynobetterfixingdevice.

Troublewithordinarydovetailorpillarguides?Solidbrassguiderailsguaranteeanoptimumslideguid-ancesolution.

TheheartofourMagneticDrillingMachines:Robustelectronicswitchunits,interchangeablebetweenModel32–40–50–75–100andbetween

40RL-E–100RL-E


ALFRA Metal Core Drilling Machines – OverviewMade in Germany by ALFRA

Type Rotabest®Micro32/50 Rotabest®Mini38/50 Rotabest®32WD Rotabest®Midi50/50 Rotabest®40RL-E Rotabest®Junior75/50 Rotabest®100/100RL-E Rotabest®V32

Prod.-No. 18552.110 18555.110 18605.110 18615.110 18611.110 18640.110 18630.110/18632.110 18710.110

Input 1050 Watt 1100 Watt 1100 Watt 1200 Watt 1200 Watt 1800 Watt 1800 Watt 900 Watt

Speed 400 450 450 250/450 100 – 250 110/175 450(rpm) 180 – 450 245/385

OilBathGearbox – – – ■ ■ ■ ■ –

FullWaveElectronics/ – – – – ■ – ■100 RL-E –Thermalprotection

MotorOverloadProtection/ – – – – ■ – ■100 RL-E –Over-VoltageSwitch-Off

Right-/LeftRotation – – – – ■ – ■100 RL-E –

FrictionClutch – – – – – ■ ■ –

Max.ØofCutter 1-1/4“ – 32 mm 1-1/2“ – 38 mm 1-1/4“ – 32 mm 2“ – 50 mm 1-5/8“ – 40 mm 3“ – 75 mm 4“ – 100 mm 1-1/4“ – 32 mm

Max.CuttingDepth 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 1“ – 25 mm 4“ – 100 mm with special tool 4“ – 100 mm

Tapping – – – Tapping Attachment M 14 Tapping Attachment with Tapping Attachment (100) – available available with Tap Collets (100 RL-E)

Countersinking ■ ■ ■ ■ ■ ■ ■ ■

TwistDrillsØmax. 1/2“ – 13 mm 1/2“ – 13 mm 1/2“ – 13 mm 3/4“ – 19 mm 3/4“ – 19 mm 1-1/4“ – 32 mm 1-1/4“ – 32 mm –

Arbor 3/4“ - 19 mm Weldon 3/4“ - 19 mm Weldon 3/4“ - 19 mm Weldon MT 2 MT 2 MT 3 MT 3 3/4“ - 19 mm Weldon

MagneticAdhesion 1800 lbs. – 8000 N 2700 lbs. – 12000 N 2475 lbs. – 11000 N 3600 lbs. – 16000 N 3600 lbs. – 16000 N 4500 lbs. – 20000 N 4500 lbs. – 20000 N 3600 lbs. – 16000 N rigid rigid rigid rigid rigid 30° swiveling 30° swiveling rigid

Min.MaterialThickness 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 3/8“ – 10 mm 3/8“ – 10 mm 1/4“ – 6 mm

SizeofMagnetFoot 2-49/64“ x 6-19/64“ – 70 x 160 mm 3-3/4“ x 7-7/8“ – 95 x 200 mm 2-49/64“ x 7-3/32“ – 70 x 180 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 95 x 200 mm

Stroke 5-5/64“ – 129 mm 5-9/16“ – 141 mm 6-19/64“ – 160 mm 6-45/64“ – 170 mm 6-45/64“ – 170 mm 7-1/2“ – 190 mm 9-21/32“ – 245 mm –

Motor 3-5/8“ – 92 mm 5“ – 127 mm 3-11/32“ – 85 mm 4“ – 100 mm 4“ – 100 mm 2-3/8“ – 60 mm 4-9/16“ – 116 mm –adjustableinheight

Weight 21 lbs. – 10.6 kg 30 lbs. – 15.5 kg 21 lbs. – 10.5 kg 35 lbs. – 16 kg 35 lbs. – 16 kg 43 lbs. – 22 kg 61 lbs. – 28 kg 28 lbs. – 12.5 kg


ALFRA Metal Core Drilling Machines – OverviewMade in Germany by ALFRA

110/175/245/385 (100)(100 RL-E)

50-110/75-175/105-245/165-385

Type Rotabest®Micro32/50 Rotabest®Mini38/50 Rotabest®32WD Rotabest®Midi50/50 Rotabest®40RL-E Rotabest®Junior75/50 Rotabest®100/100RL-E Rotabest®V32

Prod.-No. 18552.110 18555.110 18605.110 18615.110 18611.110 18640.110 18630.110/18632.110 18710.110

Input 1050 Watt 1100 Watt 1100 Watt 1200 Watt 1200 Watt 1800 Watt 1800 Watt 900 Watt

Speed 400 450 450 250/450 100 – 250 110/175 450(rpm) 180 – 450 245/385

OilBathGearbox – – – ■ ■ ■ ■ –

FullWaveElectronics/ – – – – ■ – ■100 RL-E –Thermalprotection

MotorOverloadProtection/ – – – – ■ – ■100 RL-E –Over-VoltageSwitch-Off

Right-/LeftRotation – – – – ■ – ■100 RL-E –

FrictionClutch – – – – – ■ ■ –

Max.ØofCutter 1-1/4“ – 32 mm 1-1/2“ – 38 mm 1-1/4“ – 32 mm 2“ – 50 mm 1-5/8“ – 40 mm 3“ – 75 mm 4“ – 100 mm 1-1/4“ – 32 mm

Max.CuttingDepth 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 2“ – 50 mm 1“ – 25 mm 4“ – 100 mm with special tool 4“ – 100 mm

Tapping – – – Tapping Attachment M 14 Tapping Attachment with Tapping Attachment (100) – available available with Tap Collets (100 RL-E)

Countersinking ■ ■ ■ ■ ■ ■ ■ ■

TwistDrillsØmax. 1/2“ – 13 mm 1/2“ – 13 mm 1/2“ – 13 mm 3/4“ – 19 mm 3/4“ – 19 mm 1-1/4“ – 32 mm 1-1/4“ – 32 mm –

Arbor 3/4“ - 19 mm Weldon 3/4“ - 19 mm Weldon 3/4“ - 19 mm Weldon MT 2 MT 2 MT 3 MT 3 3/4“ - 19 mm Weldon

MagneticAdhesion 1800 lbs. – 8000 N 2700 lbs. – 12000 N 2475 lbs. – 11000 N 3600 lbs. – 16000 N 3600 lbs. – 16000 N 4500 lbs. – 20000 N 4500 lbs. – 20000 N 3600 lbs. – 16000 N rigid rigid rigid rigid rigid 30° swiveling 30° swiveling rigid

Min.MaterialThickness 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 1/4“ – 6 mm 3/8“ – 10 mm 3/8“ – 10 mm 1/4“ – 6 mm

SizeofMagnetFoot 2-49/64“ x 6-19/64“ – 70 x 160 mm 3-3/4“ x 7-7/8“ – 95 x 200 mm 2-49/64“ x 7-3/32“ – 70 x 180 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 3-5/32“ x 9-1/16“ – 80 x 230 mm 95 x 200 mm

Stroke 5-5/64“ – 129 mm 5-9/16“ – 141 mm 6-19/64“ – 160 mm 6-45/64“ – 170 mm 6-45/64“ – 170 mm 7-1/2“ – 190 mm 9-21/32“ – 245 mm –

Motor 3-5/8“ – 92 mm 5“ – 127 mm 3-11/32“ – 85 mm 4“ – 100 mm 4“ – 100 mm 2-3/8“ – 60 mm 4-9/16“ – 116 mm –adjustableinheight

Weight 21 lbs. – 10.6 kg 30 lbs. – 15.5 kg 21 lbs. – 10.5 kg 35 lbs. – 16 kg 35 lbs. – 16 kg 43 lbs. – 22 kg 61 lbs. – 28 kg 28 lbs. – 12.5 kg


Micro 32/50Weldon

Motorheightcontinuously

adjustableontheslide

upto3-5/8“–92mm

Core Drilling with

ALFRA ROTABEST ®


Weldon Direct Arbor. No Tool Holder required. Thus high concentric running exactness.

Motor adjustable in height on the slide for maximum stroke enlargement when using twist drills, drill chucks or when tapping.Solid brass guide rails guarantee an optimum slide guidance.

TechnicalData:CoreDrill: Ø7/16“-1-1/4“–12.0-32.0mmCuttingDepth: 2“–50.0mmTwistDrill: Ø1/16“-1/2“–1.0-13.0mmDIN338Countersinking: Ø3/8“-1-19/32“–10.0-40.0mmInput: 1050W1-speedgearbox: 400rpmToolHolder: 3/4“–19mmWeldonshankCooling: internal,automaticallyMotor: height adjustable (new)Stroke: 5-5/64“–129mmVoltage: 110Vor230VoltMagnetadhesion: 1800lbs.–8.000NMagnetFoot: 2-49/64“x6-19/64“–70x160mmMagnetFootAssembly: rigidWeight: 21lbs.–10.6kg

Contentsinclude:• MetalCoreDrillingMachine Micro32/50Weldon• Plastictransportcase• Coolantunit• Safetybelt• Safetycover• OperationManual

Prod.-No.ALFRA Rotabest® Micro 32/50 Switch keypad 110 Volt 18552.110

ALFRA Rotabest® Micro 32/50 Switch keypad 230 Volt 18552

Metal Core Drilling Machine – ALFRA Rotabest® Micro 32/50Made in Germany by ALFRA

Core Drilling with

ALFRA ROTABEST ®


Mini 38/50Weldon



upto5“–127mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® Mini 38/50Made in Germany by ALFRA

Weldon Direct Arbor. No Tool Holder required. Thus high concentric running exactness.

Motor adjustable in height on the slide for maximum stroke enlargement when using twist drills, drill chucks or when tapping.Solid brass guide rails guarantee an optimum slide guidance.

TechnicalData:CoreDrill: Ø7/16“-1-1/2“–12.0-38.0mmCuttingDepth: 2“–50.0mmTwistDrill: Ø1/16“-1/2“–1.0-13.0mmDIN338Countersinking: Ø3/8“-1-19/32“–10.0-40.0mmInput: 1100W1-speedgearbox: 450rpmToolHolder: 3/4“–19mmWeldonshankCooling: internal,automaticallyMotor: height adjustable Stroke: 5-9/16“–141mmVoltage: 110Voltor230VoltMagnetadhesion: 2700lbs.–12.000NMagnetFoot: 3-3/4“x7-7/8“–95x200mmMagnetFootAssembly: rigidWeight: 30lbs.–15.5kg

Contentsinclude:• MetalCoreDrillingMachineMini38/50Weldon• Plastictransportcase• Coolantunit• Safetybelt• OperationManual

Prod.-No.ALFRA Rotabest® Mini 38/50 Switch keypad 110 Volt 18555.110

ALFRA Rotabest® Mini 38/50 Switch keypad 230 Volt 18555

Core Drilling with

ALFRA ROTABEST ®


32 WDCore Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® 32 WDMade in Germany by ALFRA

Trouble with ordinary dovetail or pillar guides? Solid brass guide rails guarantee an optimum slide guidance.

Durable keyboard with flat cable. Panel angled, directly in sight of the user. To feel for the ON/OFF-switch has come to an end. Easy reachability of keyboard, even in narrow U-beams and H-beams.

Improved magnetic adhesion due to 3 instead of 2 coils.

Pressed in brass rings for an improved protection of the magnet coils.

The jackscrews for the slide guidance are no longer on the front side, but on the back side of the panel. No danger of injuries. Fixing device to fix the slide on each height. For comfortable tool-change, ideal for the machine- transport.

Motor height continuously adjustable on the slide for a maximum stroke enlargement, when using twist drills, drill chucks.

TechnicalData:CoreDrill: Ø7/16“-1-1/4“–12.0-32.0mmCuttingdepth: 2“–50.0mmTwistDrill: Ø1/16“-1/2“–1.0-13.0mmDIN338Countersinking: Ø3/8“-1-19/32“–10.0-40.0mmInput: 1100W1-speedgearbox: 450rpmToolholder: 3/4“–19.0mmWeldonshank quickchangearborCooling: internal,automaticallyMotor: height adjustableVoltage: 110Voltor230VoltMagnetadhesion: 2475lbs.–11000NMagnetfoot: 2-49/64“x7-3/32“–70x180mm(rigid)Stroke: 6-19/64“–160mmWeight: 21lbs.–10.5kg

Contentsinclude:• MetalCoreDrillingMachine32WD• Transportcase• CoolantUnit• DrillchuckØ1/16“-1/2“–1-13mm• Chipremover• Safetybelt• Safetycover• operationmanual

Prod.-No.Complete set ALFRA Rotabest® 32 WD 110 Volt 18605.110

Complete set ALFRA Rotabest® 32 WD 230 Volt 18605

Core Drilling with

ALFRA ROTABEST ®

The heart of our Magnetic Drilling Machines: Robust electronic switch units, interchangeable with all types of the new Generation. Model 32 WD, Midi 50/50, Junior 75/50, 100.Easy to approach for a quick service.


Midi 50/50Motorheight

continuously


upto4“–100mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® Midi 50/50Made in Germany by ALFRA

TechnicalData:CoreDrill: Ø2“–50.0mmCuttingdepth: 2“–50.0mmTwistDrill: Ø3/4“–19.0mmCountersinking: Ø3/8“-1-19/32“–10.0-40.0mmTapping: optionalTappingAttachmentProd.-No.18652Input: 1200W2-speedgearbox 250/450rpmToolholder: MT2Cooling: internal,automaticallyMotor: height adjustableVoltage: 110Voltor230VoltMagnetadhesion: 3600lbs.–16000NMagnetfoot: 3-5/32“x9-1/16“–80x230mm(rigid)Stroke: 6-45/64“–170mmWeight: 35lbs.–16.0kg

Contentsinclude:• MetalCoreDrillingMachine Midi50/50• Plastictransportcase• CoolantUnit• Safetybelt• Safetycover• ToolHolder18003• Operationmanual

Prod.-No.Complete set ALFRA Rotabest® Midi 50/50 110 Volt 18615.110



The jackscrews for the slide guidance are no longer on the front side, but on the back side of the panel. No danger of injuries. Fixing device to fix the slide on each height. For comfortable tool-change, ideal for the machine- transport.



Core Drilling with

ALFRA ROTABEST ®




40 RL-E■ Thefeatureofthislineistheright-/lefthandrotation

■ QuickChangeTappingAdaptorswithTapColletscan beused.

■ Versatileuse:Drillingwithtwistdrillsorcorecutters, Tapping,CountersinkingandReaming.

■WithFullWaveElectronicsforoptimumspeed.

■ ROBUST–PRECISE–VERSATILE



upto4“–100mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® 40 RL-EMade in Germany by ALFRA

Tool holder is not included in scope of supply

TechnicalData:CoreDrill: Ø7/16“-1-5/8“–12.0-40.0mmCuttingdepth: 2“–50.0mmTwistDrill: Ø3/4“19.0mm withkeytypedrillchuckMT2, Ø13/64“-51/64“–5.0-20.0mmwith MT2DIN345directinsertionTapping: M3untilM14Countersinking: Ø3/8“-1-5/8“–10.0-40.0mmMotor:Capacity: 1200W2-speedgear: right/left1.speed 100-250rpm2.speed 180-450rpm

Arbor: MT2CoolantSupply: viaToolHolderFullWaveElectronics: serialThermalprotection: serialTorqueCutoff: serialMotor: height adjustableStroke: 6-45/64“Voltage: 110Vor230VoltMagneticadhesion: 3600lbs.–16000NMagnetFoot: 3-5/32“x9-1/16“–80x230mm(rigid)Weight: 35.2lbs.–16.0kg

Contentsinclude:• MetalCoreDrillingMachine 40RL-E• Plastictransportcase• CoolantUnit• QuickClampingDrillChuckØ1/8“-5/8“–3.0-16.0mm,MT2• SafetyBelt• Safetycover• OperationManual

Prod.-No.Complete set ALFRA Rotabest® 40 RL-E 110 V 18611.110

Complete set ALFRA Rotabest® 40 RL-E 230 V 18611


NEW - Durable keyboard with flat cable. Panel angled, directly in sight of the user. To feel for the ON/OFF-switch has come to an end.Easy reachability of keyboard, even in nar-row U-beams and H-beams.Additionally: Motor Control for Right-/ Left Hand Rotation.

Especially suitable for problem-free and fast tapping

The heart of our Magnetic Drilling Machines: Robust electronic switch units, interchangeable with all RL-E types. Easy to approach for a quick service.


Core Drilling with

ALFRA ROTABEST ®




Junior 75/50



upto2-3/8“–60mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® Junior 75/50Made in Germany by ALFRA



Powerful and well-proven motor with high torque and friction clutch. 1.800 Watts.4-speed oil bath gearbox.

Durable keyboard with flat cable. Panel angled, directly in sight of the user. Easy access to ON/OFF-switch. Easy reachabil-ity of keyboard, even in narrow U-beams and H-beams.

Adjustable Magnet Foot for a better posi-tioning: 10 mm back- and forwards, 30° to left and right.



Core Drilling with

ALFRA ROTABEST ®



TechnicalData:CoreDrill: Ø7/16“-3“–12.0-75.0mmCuttingDepth:: 2“-50.0mmTwistDrill: capacity5/8“drillchuckMT3, max.DrillcapacityØ1-1/4“MorseTaperTapping: upto3/4“withoptionalTappingAttachment Prod.-No.18653Countersinking: Ø3/8“-2-11/64“–10.0-55.0mmInput: 1800W4-speedgearbox: 110/175/245/385rpmArbor: MT3spindleforToolHolderAMK3CoolantSupply: viaToolHolderStroke: 7-1/2“–190mmVoltage: 110Vor230VoltMagneticAdhesion: 4500lbs.–20.000NMagnetFoot: 3-5/32“x9-1/16“–80x230mm, movable3/8“–10mmbackandforth, 30°tobothsidesWeight: 43lbs.–22.0kg

Contentsinclude:• MetalCoreDrillingMachine Rotabest®Junior75/50• Transportcase• Safetybelt• Safetycover• Coolantunit• ToolHolder18025• OperationManual

Prod.-No.ALFRA Rotabest® Junior 75/50 110 Volt 18640.110

ALFRA Rotabest® Junior 75/50 230 Volt 18640


100Motorheight

continuously


upto4-9/16“–116mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® 100Made in Germany by ALFRA


TechnicalData:CoreDrill: Ø7/16“-4“–12.0-100.0mmCuttingDepth:: 2“-50.0mm, withtoolholder18025L4“–100mmTwistDrill: Ø1/8“-5/8“–3.0-16.0mm withkeytypedrillchuckMT3, uptoØ1-1/4“–32.0mmwith MorseTapperCountersinking: Ø3/8“-2-11/64“–10.0-55.0mmTapping: uptoM20withautoreversibleTappingAttach-

mentProd.-No.18653Input: 1800W4-speedgearbox: 110/175/245/385rpmToolholder: MT3Voltage: 110Voltor230VoltMagnetadhesion: 4500lbs.–20000NMagnetfoot: 3-5/32“x9-1/16“–80x230mm, 30°adjustabletoleft/right, 3/8“–10mmback-/forwardsWeight: 61lbs.–28.0kg

Contentsinclude:• MetalCoreDrillingMachine100• Transportcase• CoolantUnit• Chipremover• Safetybelt• Safetycover• ToolHolder18025• OperationManual

Prod.-No.Complete set ALFRA Rotabest® 100 110 Volt 18630.110

Complete set ALFRA Rotabest® 100 230 Volt 18630


Powerful and well-proven motor with high torque and friction clutch. 1.800 Watts.4-speed gearbox with second grease chamber.


Adjustable Magnet Foot for a better posi-tioning: 10 mm back- and forwards, 30° to left and right.



Core Drilling with

ALFRA ROTABEST ®




100 RL-EMotorheight

continuously


upto4-9/16“–116mm

Core Drilling with

ALFRA ROTABEST ®


Metal Core Drilling Machine – ALFRA Rotabest® 100 RL-EMade in Germany by ALFRA


TechnicalData:CoreDrill: Ø7/16“-4“–12.0-100.0mmCuttingDepth:: 2“-50.0mm withtoolholder18025L4“–100mmTwistDrill: Ø1/8“-5/8“–3.0-16.0mm withkeytypedrillchuckMT3, uptoØ1-1/4“–32.0mmwith MorseTapperCountersinking: Ø3/8“-2-11/64“–10.0-55.0mmTapping: M6uptoM22withTappingcollets Prod.-No.:18681Input: 1800W4-speedgearbox: right/left 1.speed 50-110rpm 2.speed 75-175rpm 3.speed 105-245rpm 4.speed 165-385rpmToolholder: MT3Voltage: 110Voltor230VoltMagnetadhesion: 4500lbs.–20000NMagnetfoot: 3-5/32“x9-1/16“–80x230mm, 30°adjustabletoleft/right, 3/8“–10mmback-/forwardsWeight: 61lbs.–28.0kg

Contentsinclude:• MetalCoreDrillingMachine100RL-E• Transportcase• CoolantUnit• Chipremover• Safetybelt• Safetycover• QuickclampingDrillchuckMT3• OperationManual

Prod.-No.Complete set ALFRA Rotabest® 100 RL-E 110 Volt 18632.110

Complete set ALFRA Rotabest® 100 RL-E 230 Volt 18632


NEW - Durable keyboard with flat cable. Panel angled, directly in sight of the user. To feel for the ON/OFF-switch has come to an end.Easy reachability of keyboard, even in nar-row U-beams and H-beams.Additionally: Motor Control for Right-/ Left Hand Rotation.

Especially suitable for problem-free and fast tapping

The heart of our Magnetic Drilling Machines: Robust electronic switch units, interchangeable with all RL-E types. Easy to approach for a quick service.


Core Drilling with

ALFRA ROTABEST ®




V32V327-

1 / 4 “ –

184

1-57/65 “ – 48

HUB

= 1-

13/ 16

“ – 45

12-57

/ 65“ –

227.5

1-7 / 8“

– 48

7-7/8“ – 200

14-13/64“ – 361 5“ – 127

3-3/4“ – 95

Core Drilling with

ALFRA ROTABEST ®


Angular Metal Core Drilling Machine – ALFRA Rotabest® V32100% Made in Germany by ALFRA

Infeed via ratchet lever.Changeable for right and left hand opera-tion.

Suitable for confined spaces

Spur gear for robust application.

Easy handling:Magnet on – Motor on/off.

Good view from operator side to drilling tool.

Robust gear rod guidance.

■ HorizontalMetalCoreDrillingMachineforthesmallestspaces.Perfecttouse,whereregularMetalCoreDrillingMachineshavetoquitduetotheirheight.

■Application areas: Steelconstruction(inbetweengirderflanges),vehiclecon-

struction(truckframes),bridgeconstruction,towerconstruc-tion,tunnelconstruction,terselyeverywhere.

■ Thetotalheightisjust9“–227mmandcanevenbereducedto7“–185mmbyremovingthehandle.

■ Thespurgearunitisdesignedforanindustrialuseandthedownfeediscarriedoutbymeansofaratchetlever.Switchablefromrighttolefthandoperation.

■ Anotheradvantage:thedesignoftheangledgearunitensuresapermanentlubricationandavoidsdryrunning.

■Well-provenmotorsandmagneticfootcomponentsofourRota-best®seriescomeintooperation.

TechnicalData:CoreDrill: Ø7/16“-1-1/4“–12.0-32.0mmCuttingDepth: 1“–25.0mmCountersinking: Ø3/8“-1-1/4“–10.0-32.0mm

Input: 900W1-speedgearbox: 450rpmToolHolder: 3/4“–19mmWeldonshankCooling: internal,automaticallythroughthespindleVoltage: 110Voltor230VoltMagnetFoot: 3-3/4“x7-7/8“–95x200mm(rigid)Magnetadhesion: 3600lbs.–16000NHeight: 9“/7“–227/185mmPowercord: 3.0mWeight: 27.5lbs.–12.5kg

Contentsinclude:• 1AngularDrillingMachineRotabest®V32• 1Coolantunitwithhoseandnipple• 1transportcase• 1AllenkeyforWeldonarbor• 1safetybelt• 1ejectorpin1/4“x49/64–6,35x70mm• 1operationmanual

Prod.-No.Complete set ALFRA Rotabest® V32 110 Volt 18710.110

Complete set ALFRA Rotabest® V32 230 Volt 18710

27.5 lbs. – 12.5 kg

include:

Core Drilling with

ALFRA ROTABEST ®


Rotabest® Core Drilling Machines – Accessories

Description Prod.-No. Micro32/50 Midi50/50 Junior75/50 100 Mini36/50 40RL-E 100RL-E Mini38/50 32WDHSS Countersink and Deburrer with Weldon shank 18533 ■ ■ ■ ■

Ø 1“ – 25 mm With With Tool Holder Tool Holder 18003/18025 18003/18025 18650+18651 18650+18651

HSS Countersink and Deburrer with Weldon shank 18536 ■ ■ ■ ■

Ø 1 3/16“ – 30 mm With With Tool Holder Tool Holder 18003/18025 18003/18025 18650+18651 18650+18651

HSS Countersink and Deburrer with Weldon shank 18534 ■ ■ ■ ■

Ø 1-37/64“ – 40 mm With With Tool Holder Tool Holder 18003/18025 18003/18025 18650+18651 18650+18651

HSS Countersink and Deburrer with Weldon shank 18537 ■ ■

Ø 2-11/64“ – 55 mm With With Tool Holder Tool Holder 18003/18025 18003/18025 18650+18651 18650+18651

Drill chuck with Weldon shank for twist drills 18107 ■ ■

Ø 1/16“ - 1/2“ – 1 -13 mm 50/50 RL-EQuick Clamping Drill chuck with Morse Taper 2 for twist drill 18008 ■

Ø 1/16“ - 5/8“ – 1 - 16 mm

Quick Clamping Drill chuck with Morse Taper 3 for twist drill 18009 ■ ■

Ø 1/16“ - 5/8“ – 1 - 16 mm 50/50 RL-ETool Holder AMK-2 Morse Taper 2 for core drills 18003 ■ ■ ■

with Weldon shank With WithØ 7/16“ - 2-3/8“ – 12 - 60 mm Reducing Sleeve Reducing Sleevewith automatic internal cooling and nipple for coolant hose MT 3/2 MT 3/2suitable for all Machines with MT 2 arbor.

Tool Holder AMK-3 Morse Taper 3 for core drills 18025 ■ ■

with Weldon shankØ 7/16“ - 2-3/8“ – 12 - 60 mmwith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 3 arbor.

Tool Holder AMK-3 Morse Taper 3 – extended version 18025L ■ ■

with Weldon shankØ 31/64“ - 2-31/32“ – 12 - 50 mm, Cutting Depth 4“ – 110 mmwith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 3 arbor.

Tool Holder AL3 - Morse Taper 3 20230 ■ ■

for core drills strong construction,Ø 2“ - 4“ – 51 - 100 mm, with keywaywith automatic internal cooling and nipple for coolant hose 50/50 RL-EQuick Change Tool Holder Rota-Quick® 18650 ■ ■ ■

Morse Taper 2 With Withwith automatic internal cooling and nipple for coolant hose Reducing Sleeve Reducing Sleevesuitable for all machines with MT 2 arbor MT 3/2 MT 3/2max.Ø1-37/64“–40mmcoredrillsQuick Change Tool Holder Rota-Quick® 18651 ■ ■

Morse Taper 3with automatic internal cooling and nipple for coolant hosesuitable for all machines with MT 3 arbormax.Ø1-37/64“–40mmcoredrills

Prod.-No. 18533Prod.-No. 18533


Prod.-No. 18003/18025Prod.-No. 18003/18025

Prod.-No. 18025LProd.-No. 18025L


Prod.-No. 18650 + 18651max. Ø 1-37/64“ – 40 mm core drillsProd.-No. 18650 + 18651


Prod.-No. 18008/18009Prod.-No. 18008/18009


Rotabest® Core Drilling Machines – AccessoriesFor all types

Description Prod.-No.

Coolant unit complete (see illustration) 18104

ALFRA Bio 2000 21010Cutting and Drilling SpraySprayer 13.7 oz

High-performance wax pin 09011Ideal for vertical and overhead core drillings, as paste sticks to the cutter

Alfra Supercut 1 U.S. Gallon (3.78 L) Concentrated 21001

Coolant unit (without illustration) 16,7 oz 18103for Rotabest® V32 Prod.-No. 18104

Prod.-No. 21001 + 21010 + 09011

ALFRA – Magnetic Chip RemoverIn a stainless steel round rod, you can move a magnet back and forth. The strong magnet attracts the chips – pull the knob, chips fall down.For a cleaner work place.

Prod.-No.ALFRA Magnetic Chip Remover, Length 15-6/8“ – 400 mm 18654


Prod.-No. 21001 + 21010 + 09011


Rotabest® Core Drilling Machines – Accessories

Description Shank Prod.-No. Midi 50/50 75/50 100

Tapping Attachment M3 - M12 MT2 + RotaQuick® 18652 ■ ■ ■

Contents include: With Withwith Rota-Quick®- shank and MT2 Reducing Sleeve Reducing Sleeveplastic case, manual book MT 3/2 MT 3/2

Tapping Attachment M10 - M20 MT2 + RotaQuick® 18653 ■ ■

Contents include: With Withwith Rota-Quick®- shank and MT2 Reducing Sleeve Reducing Sleeveplastic case, manual book MT 3/2 MT 3/2

Tapping chuck with quick-change inserts for use with Rotabest® RL-E models with right/left rotation

Tapping Set Size 1 in wooden case 18660consisting of:Quick Change Tapping Adaptor Size 1 MT 21pc. each of Tap Collet Size 1M3 – M4 – M5 – M6 – M8 – M10 – M12 – M14

Tapping Set Size 2 in wooden case 18680consisting of:Quick Change Tapping Adaptor Size 2 MT 31pc. each of Tap Collet Size 2M6 – M8 – M10 – M12 – M14 – M16 – M18 – M20 – M22

Quick Change Tapping Adaptor Size 1 MT 2, separate 18661

Quick Change Tapping Adaptor Size 2 MT 3, separate 18681

Tap Collets with clutch

Shank-Ø mm Square mm Tap Size 1 M3 3.5 2.7 DIN 371 18662Size 1 M4 4.5 3.4 DIN 371 18663Size 1 M5 6.0 4.9 DIN 371 18664Size 1 M6 6.0 4.9 DIN 371 18678Size 1 M8 8.0 6.2 DIN 371 18665Size 1 M10 10.0 8.0 DIN 371 18666Size 1 M12 9.0 7.0 DIN 376 18667Size 1 M14 11.0 9.0 DIN 376 18668

Size 2 M6 6.0 4.9 DIN 371 18682Size 2 M8 8.0 6.2 DIN 371 18683Size 2 M10 10.0 8.0 DIN 371 18684Size 2 M12 9.0 7.0 DIN 376 18685Size 2 M14 11.0 9.0 DIN 376 18686Size 2 M16 12.0 9.0 DIN 376 18687Size 2 M18 14.0 11.0 DIN 376 18688Size 2 M20 16.0 12.0 DIN 376 18689Size 2 M22 18.0 14.5 DIN 376 18690

Prod.-No. 18652 + 18653Prod.-No. 18652 + 18653

For Machines with right-/left-hand rotation

Prod.-No. 18680

Technical information and recommended values for tapping with Metal Core Drilling Machines see page 111.

Prod.-No. 18682 (M6) Prod.-No. 18681

Prod.-No. 18681 – Assembly NoteProd.-No. 18681 – Assembly NoteProd.-No. 18681 – Assembly NoteProd.-No. 18681 – Assembly Note

RL-E models with right/left rotation

Prod.-No. 18680

right-/left-hand rotation


Accessories – Mechanical Clamping Devices for pipesFor all types

Description

“If all hell lets loose“ on site - or in the workshop our mechanical attachment for clamp-ing pipes with tension chains enables the use of Magnetic Core Drilling Machines on pipes from Ø 3-5/32“ – 80 mm.The adjustment is carried out by means of clamping jaws. For pipes of various Ø.Base plate for magnet foot 4“ x 8“ – 100 x 205 mm

Prod.-No.Attachment for Clamping Pipes with 180191 tension chain Ø 3-5/32“ - 12“ – 80-300 mm, Weight 16.5 lbs. – 7.5 kg

Attachment for Clamping Pipes with 180202 tension chains Ø 3-5/32“ - 36“ – 80-900 mm, Weight 26.4 lbs. – 12 kg

Attachment for Clamping Pipes with 180211 tension strap Ø 3-5/32“ - 36“ – 80-900 mm, Weight 14.3 lbs. – 6.5 kg

Clamping range with two-fold tension belt up to 2000 mm pipe-Ø on request Prod.-No. 18022.


Prod.-No. 18020

Prod.-No. 18021

Prod.-No. 18020

Prod.-No. 18021

Clamping range with two-fold tension belt up to 2000 mm Prod.-No. 18020

Prod.-No. 18021


Machine Dimensions – ALFRA Rotabest® Micro 32/50


Machine Dimensions – Rotabest® Mini 38/50

Machine Dimensions –ALFRA Rotabest® 32 WD

16-21

/ 32 “ +

3-55

/ 64 “ –

423 +

98

7-7/8“ – 200

HUB

= 5-

9 / 16 –

141

11-11

/ 32 –

288

11-7/32“ – 285

14-13

/ 64 –

361

3-3/4“ – 95

6-57/65“ – 175

1-27

/ 64 –

36

17-31

/ 64 “ +

3-11

/ 32 “ –

444 +

85

7-3/32“ – 180

HUB

= 6-

19/ 64

– 16

012

-1 / 8 – 3

08

10-7/16“ – 265

10-41

/ 64 –

270

2-3/4“ – 70

6-15/32“ – 164

1-37

/ 64 –

40


Machine Dimensions – ALFRA Rotabest® 40 RL-E/Midi 50/50

Machine Dimensions – Rotabest® Junior 75/50

25-9 / 32

“ + 2-

23/ 64

“ – 64

2 - 60

9-1/16“ – 230

HUB

= 7-

31/ 64

– 19

041

6

14-3/32“ – 358

391

3-5/32“ – 80

8-17/64“ – 210

3-3 / 16

– 81

2-23

/ 64 –

60


Machine Dimensions – Rotabest® 100/100 RL-E

Your company logo to-gether with the techni-cal data could be placed here.

Housing in your company color.Your company logo to-

gether with the techni-cal data could be placed

Housing in your company color.

ALFRA – OEM Magnetic Drilling Machines

Min order: 50 pcs. per lot.OEM possible with all types of machines and tools! Please ask for details.

Magnetic Drilling Machines Made by ALFRA according to your request.

You’d like to use Magnetic Drilling Machines according to your personal ideas and request?No problem for us! Just talk to one of our sales representatives!

Machine Dimensions – ALFRA Rotabest® 40 RL-E/Midi 50/50


100% Made in

Germany


Advantages of ALFRA ROTABEST® HSS-Co Cutters

100% German Specialty Steel!!!

Design SpeciallydesignedcuttinggeometryAdvantages ■ Immediatecentering ■ Norunningoffcenter ■ Goodconcentricity ■ SuitableforNCandCNCmachines

Design OptimumregularchipbreakerAdvantages ■ Smoothcutting ■ Excellentcuttingcapacity ■ Goodchipproductionateachtooth ■ Regularchipflow

Design Minimumcrosssectionofchipremoving surfaceAdvantages ■ Easycutting ■ Lowtorque ■ Minimumdemandforenergy

Design Hightoothhardnessduetooptimumraw materialandspecialheattreatmentAdvantages ■ Longtoollife ■ Alsosuitableformaterialsdifficulttocut

Design HightoughnessofcutterAdvantages ■ Lowriskoftoolbreakage,especially underroughworkingconditions

Manufacturedbystate-of-the-artCNCtechnology ■ Bestreproducibility ■ Constantquality

InchSizesHSS-Co

1“-4“Depth

Inch SizesHSS-Co

1“ - 4“ Depth

technologytechnology

Internal Bore for ejector pin+ coolant supply

Conical Grinding

Optimized tooth shapewith pre- and Post-cutter

Optimized wall thickness

usable cutting depth

HSS-Co Cutters HSS-Co Cutters

100% German Specialty Steel!!!

30 years of proven

quality


ALFRA Rotabest® – HSS-Co CuttersWith Weldon-shank 3/4“ – MADE IN GERMANY

■ With Weldon shank 3/4“ 2 clamping surfaces, 1 Countersinking for RotaQuick®

■ Internal bore 1/4“ ■ Steel quality: Proprietary High Speed Steel■ Ground section: high performance cutting with pre- and post cutter

Suitable for:ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick® quick change system, BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Jancy, Hougen, Magtron, Promac, Rotabroach and as well as for all types of magnetic drilling machines with Weldon shank.

High performance toothing with pre- (1) and post (2) cutterHigh performance toothing with pre- (1)

12

Countersinking for RotaQuick® Weldon

Ø in inch Ø in mm Prod.-No. Prod.-No. Prod.-No.* Prod.-No.* Stack DrillingCutting depth 1“ 2“ 3“ 4“ Geometry 1“

7/16“ 11 99111 - – – – 12 99121 99122 – – –1/2“ 13 99131 99132 – – 99131SC 14 99141 99142 – – 99141SC9/16“ 15 99151 99152 – – 99151SC5/8“ 16 99161 99162 – – 99161SC 17 99171 99172 – – 99171SC11/16“ 18 99181 99182 99183* – 99181SC3/4“ 19 99191 99192 99193* – 99191SC 20 99201 99202 99203* 99204* 99201SC13/16“ 21 99211 99212 99213* 99214* 99211SC 22 99221 99222 99223* 99224* 99221SC7/8“ 23 99231 99232 99233* 99234* 99231SC15/16“ 24 99241 99242 99243* 99244* 99241SC 25 99251 99252 99253* 99254* 99251SC1“ 26 99261 99262 99263* 99264* 99261SC1-1/16“ 27 99271 99272 99273* 99274* 99271SC 28 99281 99282 99283* 99284* 99281SC1-1/8“ 29 99291 99292 99293* 99294* 99291SC 30 99301 99302 99303* 99304* 99301SC1-3/16“ 31 99311 99312 99313* 99314* 99311SC1-1/4“ 32 99321 99322 99323* 99324* 99321SC 33 99331 99332 99333* 99334* 99331SC1-5/16“ 34 99341 99342 99343* 99344* 99341SC1-3/8“ 35 99351 99352 99353* 99354* 99351SC 36 99361 99362 99363* 99364* 99361SC1-7/16“ 37 99371 99372 99373* 99374* 99371SC 38 99381 99382 99383* 99384* 99381SC1-1/2“ 39 99391 99392 99393* 99394* 99391SC1-9/16“ 40 99401 99402 99403* 99404* 99401SC 41 99411 99412 99413* 99414* 99411SC1-5/8“ 42 99421 99422 99423* 99424* 99421SC1-11/16“ 43 99431 99432 99433* 99434* 99431SC 44 99441 99442 99443* 99444* 99441SC1-3/4“ 45 99451 99452 99453* 99454* 99451SC 46 99461 99462 99463* 99464* 99461SC1-13/16“ 47 99471 99472 99473* 99474* 99471SC1-7/8“ 48 99481 99482 99483* 99484* 99481SC 49 99491 99492 99493* 99494* 99491SC1-15/16“ 50 99501 99502 99503* 99504* 99501SC2“ 51 99511 99512 99513* 99514* 99511SC 52 99521 99522 99523* 99524* 99521SC2-1/16“ 53 99531 99532 99533* 99534* 99531SC2-1/8“ 54 99541 99542 99543* 99544* 99541SC 55 99551 99552 99553* 99554* 99551SC2-3/16“ 56 99561 99562 99563* 99564v 99561SC2-1/4“ 57 99571 99572 99573* 99574v 99571SC 58 99581 99582 99583* 99584* 99581SC2-5/16“ 59 99591 99592 99593* 99594* 99591SC2-3/8“ 60 99601 99602 99603* 99604* 99601SC Ejector pin 1926500 1950500 1975500 1911500 1926500Size 1/4“ x 3-1/8“ 1/4“ x 3-15/16“ 1/4“ x 5-1/4“ 1/4“ x 6-1/4“ 1/4“ x 3-1/8“

* These Cutters are available on special request.


Prod.-No. 9906050

Prod.-No. 9910025

Prod.-No. 9906025

ALFRA Rotabest® – HSS-Co Cutters SetsWith Weldon-shank 3/4“ – MADE IN GERMANY

Prod.-No. 9910050

Prod.-No. 9906025

Prod.-No. 9910025

Prod.-No. 9906025Prod.-No. 9906025

Prod.-No. 9910050

Prod.-No. 99901

■ An assortment of the most popular sizes of cutters clearly presented in a plastic case.■ An absolute protection of the teeth even in rough applications on the spot and in the workshop.■ On request, we can manufacture your individual sets from Ø 19/16“ - 1-1/16“.

HSS-Co Cutter Set Prod.-No.Cutting depth 1“ 9906025

Content of the set:6cutters, Ø 9/16“, 5/8“, 11/16“, 13/16“, 15/16“, 1-1/16“in solid plastic caseincl. 1 ejector pin Prod.-No. 1926500


Content of the set:10cuttersØ 1/2“, 9/16“, 5/8“, 11/16“, 3/4“, 13/16“, 7/8“, 15/16“, 1“, 1-1/16“in solid plastic caseincl. 2 ejector pins Prod.-No. 1926500


Content of the set:6cutters, Ø 9/16“, 5/8“, 11/16“, 13/16“, 15/16“, 1-1/16“in solid plastic caseincl. 1 ejector pin Prod.-No. 1950500


Content of the set:10cutters, Ø 1/2“, 9/16“, 5/8“, 11/16“, 3/4“, 13/16“, 7/8“, 15/16“, 1“, 1-1/16“in solid plastic case incl. 2 ejector pins Prod.-No. 1950500

99121 x1; 99151 x1; 99161 x2; 99181 x2; 99191x1; 99211x2; 99231x2; 99241 x2; 99261x1; 99271 x2; 99291 x1; 99321 x1; 99391 x1; 99511 x1; 99122 x1; 99152 x1; 99162 x2; 99182 x2; 99192 x1; 99212 x2; 99232 x2; 99242 x2; 99262 x1; 99272 x 2; 99292 x 1; 99322 x1; 99392 x1; 99512 x1; 20182 x 1; 20212 x 1; 20242 x 1; 20272 x 2; 20292 x 1; 20322 x 1; 20392 x 1; 20452 x 1; 20512 x 1; 1926500 x1; 1950500 x1; 2001501 x 1


Made inGermany

High performance teethSmoth cutting, good chip production at each toothPre (1), middle (2), post cutter (3)


■ With Weldon shank 3/4“■ Internal bore: Ø 35/64“ - 21/32“ = 1/4“ Ø 11/16“ - 1-15/16“ = 5/16“ ■ Ground section: high performance toothing with pre-, middle- and post cutter■ For highest requirements in capacity and tool life■ These tools can also be used on all Magnet Drilling

Machines with Weldon arbor.

Suitable for:ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick® quick change system, BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Jancy, Hougen, Magtron, Promac, Rotabroach and as well as for all types of magnetic drilling machines with Weldon shank.

High performance teethSmoth cutting, good chip production at each toothPre (1), middle (2), post cutter (3)

ALFRA Rotabest® – TCT CuttersWith Weldon shank 3/4“ – 19.0 mm

39

* Attention: These Cutters are available on special request.

Ø in inch Ø in mm Prod.-No. Prod.-No. Prod.-No.*Cutting depth 1-3/8“ 2“ 3“

14 201435 20142 –9/16“ 15 201535 20152 –5/8“ 16 201635 20162 – 17 201735 20172 –11/16“ 18 201835 20182 20183*3/4“ 19 201935 20192 20193* 20 202035 20202 20203*13/16“ 21 202135 20212 20213* 22 202235 20222 20223*7/8“ 23 202335 20232 20233*15/16“ 24 202435 20242 20243* 25 202535 20252 20253*1“ 26 202635 20262 20263*1-1/16“ 27 202735 20272 20273* 28 202835 20282 20283*1-1/8“ 29 202935 20292 20293* 30 203035 20302 20303*1-3/16“ 31 203135 20312 20313*1-1/4“ 32 203235 20322 20323* 33 203335 20332 20333*1-5/16“ 34 203435 20342 20343*1-3/8“ 35 203535 20352 20353* 36 203635 20362 20363*1-7/16“ 37 203735 20372 20373* 38 203835 20382 20383*1-1/2“ 39 203935 20392 20393*1-9/16“ 40 204035 20402 20403* 41 204135 20412 20413*1-5/8“ 42 204235 20422 20423*1-11/16“ 43 204335 20432 20433* 44 204435 20442 20443*1-3/4“ 45 204535 20452 20453* 46 204635 20462 20463*1-13/16“ 47 204735 20472 20473*1-7/8“ 48 204835 20482 20483* 49 204935 20492 20493*1-15/16“ 50 205035 20502 20503*2“ 51 205135 20512 20513*

Ejector Pin 2001500 2001501 2001502Size 5/16” x 3-7/16“ 5/16” x 3-15/16“ 5/16” x 5-1/4“


ALFRA Rotabest® – TCT Cutters for industrial usesuitable for all Magnetic Drilling-, Pillar Drilling- and Milling Machines

Shorter and sturdier tool construction. ALFRA-Design.High concentric running exactness.Shorter and sturdier tool construction. ALFRA-Design.Shorter and sturdier tool construction. ALFRA-Design.

Prod.-No. 20230Prod.-No. 20230Prod.-No. 20230

Description of the Modifications■ shape of the body■ design for the chip guiding groove■ reduced no. of teeth■ cutting geometry

Results■ perfect first cut■ good self-centering performance■ less cutting pressure required■ no chattering, vibration-free operation■ splitted chips (abt. 0.20 - 0.25 mm wide)■ whole cutting depth can be drilled at a time■ no jamming of the chips■ core was ejected trouble-free

■ Strong construction for industrial applications with keyway and fitting key.■ Extended series of tests have shown that this special construction with keyway and fitting key proves well in comparison with standard Weldon shank 1-1/4“ – 32 mm. Optimal absorption of high torsion. Shorter and thus sturdier tool construction.■ Ground section: Pre-, middle- and post cutter.■ Necessary: Tool Holder with internal cooling AL 3 MT 3 Prod.-No. 20230 AL 4 MT 4 Prod.-No. 20240 Ø in inch Ø in mm Prod.-No. Prod.-No. Prod.-No.*Cutting depth 2“ 3“ 4“

2“ 51 202051 2020513 2020514* 52 202052 2020523 2020524*2-1/16“ 53 202053 2020533 2020534*2-1/8“ 54 202054 2020543 2020544* 55 202055 2020553 2020554*2-3/16“ 56 202056 2020563 2020564* 57 202057 2020573 2020574*2-1/4“ 58 202058 2020583 2020584*2-5/16“ 59 202059 2020593 2020594*2-3/8“ 60 202060 2020603 2020604* 61 202061 2020613 2020614*2-7/16“ 62 202062 2020623 2020624* 63 202063 2020633 2020634*2-1/2“ 64 202064 2020643 2020644* 65 202065 2020653 2020654*2-9/16“ 66 202066 2020663 2020664*2-5/8“ 67 202067 2020673 2020674* 68 202068 2020683 2020684*2-11/16“ 69 202069 2020693 2020694*2-3/4“ 70 202070 2020703 2020704* 71 202071 2020713 2020714*2-13/16“ 72 202072 2020723 2020724*2-7/8“ 73 202073 2020733 2020734* 74 202074 2020743 2020744*2-15/16“ 75 202075 2020753 2020754*3“ 76 202076 2020763 2020764* 77 202077 2020773 2020774*3-1/16“ 78 202078 2020783 2020784*3-1/8“ 79 202079 2020793 2020794* 80 202080 2020803 2020804*3-3/16“ 81 202081 2020813 2020814* 82 202082 2020823 2020824*3-1/4“ 83 202083 2020833 2020834*3-5/16“ 84 202084 2020843 2020844* 85 202085 2020853 2020854*3-3/8“ 86 202086 2020863 2020864*3-7/16“ 87 202087 2020873 2020874* 88 202088 2020883 2020884*3-1/2“ 89 202089 2020893 2020894*3-9/16“ 90 202090 2020903 2020904* 91 202091 2020913 2020914*3-5/8“ 92 202092 2020923 2020924* 93 202093 2020933 2020934*3-11/16“ 94 202094 2020943 2020944*3-3/4“ 95 202095 2020953 2020954* 96 202096 2020963 2020964*3-13/16“ 97 202097 2020973 2020974*3-7/8“ 98 202098 2020983 2020984* 99 202099 2020993 2020994*3-15/16“ 100 202100 2021003 2021004*4“ 102 202102 2021013 2021014*

* Attention: These Cutters are available on special request.Ejector Pin 8 x 102 mm 2001501Tool Holder AL 2/MT 2 20220Tool Holder AL 3/MT 3 20230 20230L 20230LTool Holder AL 4/MT 4 20240Tool Holder AL 5/MT 5 20250


Overview – Tool HoldersFor all types with Morse taper 2 or 3

■ Tool Holders are necessary, when using Magnetic Drilling Machines without Weldon arbor.

■ The capacity of older generation of Magnetic Drilling Machines with a Morse taper can be enlarged.

■ The cutters can then be mounted with the Tool Holders as well as on pillar drilling machines and milling machines.

■ With automatic internal cooling

■ All Tool Holders are supplied in a solid plastic case

Ø in mm Prod.-No.

Tool Holder AMK-2 – Morse taper 2 18003for cutters with Weldon shankØ 7/16“ - 2-3/8“ – 12 - 60 mmWith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 2 arbor.

Tool Holder AMK-2 L – Morse taper 2 18003Lfor cutters with Weldon shankØ 20 - 50 mm, Cutting Depth 110 mmWith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 2 arbor.

Tool Holder AMK-3 – Morse taper 3 18025for cutters with Weldon shankØ 7/16“ - 2-3/8“ – 12 - 60 mmWith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 3 arbor.

Tool Holder AMK-3 – Morse taper 3 18025Lfor cutters with Weldon shankØ 31/64“ - 2-31/32“ – 12 - 50 mm, Cutting Depth 4-11/32“ – 110 mmWith automatic internal cooling and nipple for coolant hosesuitable for all Machines with MT 3 arbor.

Tool Holder AL3 – Morse taper 3 20230for cutters strong constructionØ 2“ - 4“ – 51 - 100 mm, with keywayWith automatic internal cooling and nipple for coolant hose and ejector pin 8 x 102 mm, Prod.-No. 2001501

Tool Holder AL4 – Morse taper 4 20240for cutters strong constructionØ 2“ - 4“ – 51 - 100 mm, with keywayWith automatic internal cooling and nipple for coolant hoseand ejector pin 8 x 102 mm, Prod.-No. 2001501

Quick-change Tool Holder Rota-Quick® 18650Morse taper 2With automatic internal cooling and nipple for coolant hosesuitable for all machines with drill spindle MT 2max.Ø1-37/64“–40mmcoredrills

Quick-change Tool Holder Rota-Quick® 18651Morse taper 3With automatic internal cooling and nipple for coolant hosesuitable for all machines with drill spindle MT 3max.Ø1-37/64“–40mmcoredrills

Prod.-No. 18003 MT2

Prod.-No. 18025 MT3

Prod.-No. 18025L

Prod.-No. 202..

Prod.-No. 18650

Prod.-No. 18651

Prod.-No. 18003 MT2

Prod.-No. 18025 MT3

Prod.-No. 18025L

Prod.-No. 202..

Prod.-No. 18650

Prod.-No. 18651


ALFRA Rotabest® Adaptors – Overview

Prod.-No. 20201

Weldon

FEIN/HitachiM18 x 6P 1.5Internal Thread

Prod.-No. 20202Weldon

FEIN/HitachiM18 x 6P 1.5Internal Thread

Prod.-No. 20204

Weldon FEIN-Quick IN

Prod.-No. 20206

Prod.-No. 20210

WeldonFEIN-Quick IN

■ You use FEIN Magnetic Drilling Machines? ■You do not want to do it without ALFRA Rotabest® Cutters?■No Problem – we have the suitable adaptors

Prod.-No.Adaptor with internal thread M 18 x 6P 1.5 20201Adaptor for the use of Rotabest HSS-Co-Eco Cutters from Ø 7/16“ - 1-1/4“ – 12.0 - 32.0 mm and Rotabest® TCT Cutters from Ø 9/16“ - 1-1/4“ – 14.0 - 32.0 mm on FEIN Magnetic Drilling Machines Type KBM 542

Adaptor with external thread 20202Adaptor for the use of FEIN Cutters with internal thread M18 x 6P 1.5On Magnetic Drilling Machines with Weldon shank.

Adaptor 20204Adaptor for the use of all Cutters with Weldon shank on FEIN Quick IN Quick change systems.

This Adaptor is inapplicable when using our HSS-Eco Cutters Prod.-Nos. 1936501 and 2009....

To be used with Original-FEIN ejector pins (125 mm)

Extension Adaptor 20206with Weldon shank and ejector pin.

For the use of Cutters with 1“ - 1 3/8“ - 2“ cutting depth for applications, where the sur-face of the material to be drilled, is below the platform of the machine. The first ejector pin releases the second ejector pin, the coolant runs through the bore to the Cutter.

Total length of Adaptor: 3-1/8“ – 80 mmDiameter: 1-1/4“ – 32 mmEjector Pin: 1/4“ x 3“ – 6,35 x 77 mm Prod.-No. 1926500

Adaptor cpl. with 1 ejector pin and Allen key 20210for Core drills with FEIN-Quick IN shank for the use on machines with Weldon shank.

Spare ejector pin (for adapt0r only) 1/4“ x 4-59/64“ 1936501


ALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRAALFRA - - - - - - - - - PPPPPPPPPPPPPPPPPPPressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressressress P P P P P P P P P P P P P P P P P P P P P PremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumremiumXX EasilyXportablE,XfullyXautomaticXHydraulicXpuncHingXunitsXforXstEEl-,XbridgE-,XcontainEr,XcranE-XandXmEtalXconstruction

XX mobilEXusE,XnoXtransportXofXmatErial

XX ExtrEmElyXquiEtXpuncHing

XX EasyXpositioningXtHrougHXstop-functionXofXtHEXpuncH

XX twoXcHoicEs:XsinglEXorXdoublEXacting


APS60 APS70 APS120 APS70€co APS110D

Prod.No. 23001 23002 23004 23002.Eco 23181

Max.Hole-Ø 11/16“ 7/8“ 1-1/16“ 7/8“ 1-1/16“

Max.OblongHole – 7/8“ x 9/16“ 1“ x 11/16“ 7/8“ x 9/16“ 1“ x 11/16“

Max.MaterialThicknessSt.42 3/8“ 1/2“ 5/8“ 1/2“ 5/8“

Totalpunchingtimewithpump... SC 05 II-B: approx. 7 sec. SC 17: approx. 4 sec.

SC 05 II-B: approx. 10 sec.SC 17: approx. 5 sec.

SC 05 II-B: approx. 15 sec.SC 17: approx. 8 sec. AHP-03-03: approx. 20 sec. SC 17 D: approx. 8 sec

ThroatDepth 2-3/8“ 2-3/4“ 4-3/8“ 2-3/4“ 4-3/8“

Max.Pressure 10150 psi 10150 psi 10150 psi 10150 psi 10150 psi

PunchingPower 22 t 30 t 44 t 30 t 44 t

PunchStroke 5/8“ 11/16“ 25/32“ 11/16“ 25/32“

Weight 37 lbs 46 lbs 77 lbs 46 lbs 77 lbs

StandardEquipment Hydraulic Hose 16 ft / Spanner Hydraulic Hose 16 ft / Spanner Hydraulic Hose 16 ft / SpannerDepth Fence Hydraulic Hose 10 ft / Spanner Hydraulic Hose 16 ft / Spanner

Depth Fence

SC 05 II-B SC 17 AHP-03-03 SC 17 D

Prod.No. 23007.110 23170.110 23006.110 23186.110

Max.Pressure 750 bar 750 bar 700 bar 750 bar

10670 psi 10670 psi 10150 psi 10670 psi

Pumpcapacity 0.2 Gal/min at 2770 rpm 0.43 Gal/min at 1370 rpm 0.14 Gal/min at 2720 rpm 0.43 Gal/min at 1370 rpm

MotorCapacity 1100 W, 110V (60 Hz) 1500 W, 110V (60 Hz) 550 W, 110V (60 Hz) 1500 W, 110V (60 Hz)

OilQuantity 1 1/3 Gal – 5 l 4 1/2 Gal – 17 l 2/3 Gal – 2.5 l 4 1/2 Gal – 17 l

Weightincl.oilfilling 59 lbs 99 lbs 39 lbs 103 lbs

ALFRA- Hydraulic Pumps Made in Germany by ALFRA

ALFRA PRESS – Hydraulic Punching UnitsMade in Germany by ALFRA

On request

0.2 Gal/min at 2770 rpm


APS60 APS70 APS120 APS70€co APS110D

Prod.No. 23001 23002 23004 23002.Eco 23181

Max.Hole-Ø 11/16“ 7/8“ 1-1/16“ 7/8“ 1-1/16“

Max.OblongHole – 7/8“ x 9/16“ 1“ x 11/16“ 7/8“ x 9/16“ 1“ x 11/16“

Max.MaterialThicknessSt. 42 3/8“ 1/2“ 5/8“ 1/2“ 5/8“

Totalpunchingtimewithpump... SC 05 II-B: approx. 7 sec. SC 17: approx. 4 sec.

SC 05 II-B: approx. 10 sec.SC 17: approx. 5 sec.

SC 05 II-B: approx. 15 sec.SC 17: approx. 8 sec. AHP-03-03: approx. 20 sec. SC 17 D: approx. 8 sec

ThroatDepth 2-3/8“ 2-3/4“ 4-3/8“ 2-3/4“ 4-3/8“

Max.Pressure 10150 psi 10150 psi 10150 psi 10150 psi 10150 psi

PunchingPower 22 t 30 t 44 t 30 t 44 t

PunchStroke 5/8“ 11/16“ 25/32“ 11/16“ 25/32“

Weight 37 lbs 46 lbs 77 lbs 46 lbs 77 lbs

StandardEquipment Hydraulic Hose 16 ft / Spanner Hydraulic Hose 16 ft / Spanner Hydraulic Hose 16 ft / SpannerDepth Fence Hydraulic Hose 10 ft / Spanner Hydraulic Hose 16 ft / Spanner

Depth Fence

SC 05 II-B SC 17 AHP-03-03 SC 17 D

Prod.No. 23007.110 23170.110 23006.110 23186.110

Max.Pressure 750 bar 750 bar 700 bar 750 bar

10670 psi 10670 psi 10150 psi 10670 psi

Pumpcapacity 0.2 Gal/min at 2770 rpm 0.43 Gal/min at 1370 rpm 0.14 Gal/min at 2720 rpm 0.43 Gal/min at 1370 rpm

MotorCapacity 1100 W, 110V (60 Hz) 1500 W, 110V (60 Hz) 550 W, 110V (60 Hz) 1500 W, 110V (60 Hz)

OilQuantity 1 1/3 Gal – 5 l 4 1/2 Gal – 17 l 2/3 Gal – 2.5 l 4 1/2 Gal – 17 l

Weightincl.oilfilling 59 lbs 99 lbs 39 lbs 103 lbs

ALFRA- Hydraulic Pumps Made in Germany by ALFRA

0.14 Gal/min at 2720 rpm


ALFRA-Press APS 70 Prod.-No.Hydraulic Punching Unit with automatic return stroke 23002via neoprene spring

Technical Data:Max. hole Ø mm 7/8“ – 22 mmOblong holes max. 7/8“ x 9/16“ – 22 x 14 mmMax. material thickness 1/2“ – 13 mm when working on St. 42Total punching timewith Pump SC 05 II-B 10 sec.with Pump SC 17 5 sec.Throat depth 2-3/4“ – 70 mmMax. pressure 10150 psiPunching power 30 tPunch stroke 11/16“ – 18 mmWeight 46 lbs. – 21 kgContents include: APS 70 Punching Unit, control cable and hydraulic hose 16 ft, spanner, depth fence, suspension hook

ALFRA-Press APS 120 Prod.-No.Hydraulic Punching Unit with automatic return stroke 23004via neoprene spring

Technical Data:Max. hole Ø mm 1-1/16“ – 27 mmOblong holes max. 1“ x 11/16“ – 25 x 18 mmMax. material thickness 5/8“ – 16 mm when working on St. 42Total punching timewith Pump SC 05 II-B 15 sec.with Pump SC 17 8 sec.Throat depth 4-3/8 “ – 110 mmMax. pressure 10150 psiPunching power 44 tPunch stroke 25/32“ – 20 mmWeight 77 lbs. – 35 kgContents include: APS 120 Punching Unit, control cable and hydraulic hose 16 ft, spanner, depth fence, suspension hook

Importanttechnicalnotice:TheAPSPunchingUnitsarenotsuitableforpunchinghigh-tensiletoolsteels,stainlesssteelsorboilerplates.Askforourtechnicaladviceforpunchingjobsinthisapplicationrange.

Prod.-No. 23002

Prod.-No.

Prod.-No. 23002

Prod.-No. 23004

Type A B C D E F G H I J K L M NAPS70 70 24 15 51 85 100 80 40 80 204 382 562 125 135APS120 110 25 18 51 111 110 90 68 100 285 442 585 144 135

Type A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M NType A B C D E F G H I J K L M N

mm

ALFRA-Press – Hydraulic Punching Units single actingMade in Germany by ALFRA


ALFRA – Hydraulic PumpsMade in Germany by ALFRA

Prod.-No. 23007.110

Prod.-No. 23170.110

SC 17

SC 05 II-B

Prod.-No. 23007.110

SC 05 II-B

ALFRA-Press – Hydraulic Punching Units single actingMade in Germany by ALFRA

For the use of our Punching Units, there are two Hydraulic Pumps available

ALFRA Hydraulic-Pump SC 05 II-B for APS 60, 70, 120

Prod.-No.ALFRA Hydraulic-Pump SC 05 II 23007.110

Technical Data:Working pressure max. 1653.1 lbs./cm2 – 750 kg/cm2 (10670 psi)Pump capacity 0.2 Gal/min at 2770 rpmOil quantity 1 1/3 Gal – 5 lSingle phase motor 2770 rpm 1100 W 110v 60 HZWeight incl. oil and roll bar 59 lbs. – 27 kg

ALFRA Hydraulic-Pump SC 17 for APS 60, 70, 120

Prod.-No.ALFRA Hydraulic-Pump SC 17 23170.110complete with control and switch box

This new pump was especially developed to drastically reduce the punching time. Specially suitable for the use in the workshop.

Technical Data:Working pressure max. 1653.1 lbs./cm2 – 750 kg/cm2 (10670 psi)Pump capacity 0.43 Gal/min at 1370 rpmOil quantity 4 1/2 Gal – 17 lSingle phase motor 1370 rpm 1500 W 110v 60 HZWeight incl. oiland transport rollers 99 lbs. – 45 kgDimensions (L x W x H) 21-11/16“ x 14-9/16“ x 22-1/16“ – 550 x 370 x 560 mm


ALFRA-Press – Hydraulic Punching Units ECO100% manufactured in Germany by ALFRA

Prod.-No. 23002.Eco

Prod.-No. 23006.110

ALFRA-Press APS 70 Eco Prod.-No.Hydraulic Punching Unit with automatic return stroke 23002.Eco

Technical data:Max. hole Ø mm 7/8“ – 22 mmMax. oblong holes 7/8“ x 9/16“ – 22 x 14 mmMax. material thickness 1/2“ – 13 mm when working on St. 42Total punching timewith pump AHP-03-03 approx. 20 sec.Throat depth 2-3/4“ – 70 mmMax. pressure 10150 psi – 700 barPunching power 30 tPunch stroke 11/16“ – 18 mmWeight 46 lbs. – 21 kg

Contents include: APS 70 Eco Punching Unit, control cable and hydraulic hose 10 ft, spanner, suspension hook

ALFRA Hydraulic-Pump AHP-03-03 Prod.-No.ALFRA Hydraulic-Pump AHP-03-03 23006.110

Technical Data:Working pressure max. 10150 psi – 700 barPump capacity 100-700 kg/cm2 0.14 Gal/min at 2720 rpmOil quantity 2/3 Gal – 2.5l Single phase motor 2720 rpm 550 W 110v 60 HzWeight incl. oil and roll bar 39 lbs. – 18 kg


ALFRA-Press – Hydraulic Punching Units double actingMade in Germany by ALFRA

Type A B C D E F G H I J K L M NAPS70D 70 24 28 55 126 112 73 41 71 295 387 468 141 124APS110D 110 24 18 55 90 112 73 41 78 210 351 383 121 124

Prod.-No. 23181

Importanttechnicalnotice:TheAPSPunchingUnitsarenotsuitableforpunchinghigh-tensiletoolsteels,stainlesssteelsorboilerplates.Askforourtechnicaladviceforpunchingjobsinthisapplicationrange.

mm

Prod.-No. 23186.110

Connector for double hose package.

SC 17 D

ALFRA-Press APS 110D Prod.-No.Hydraulic Punching Unit with automatic return stroke 23181

Technical data:Max. hole Ø mm 1-1/16“ – 27 mmMax. oblong holes 1“ x 11/16“ – 25 x 18 mmMax. material thickness 5/8“ – 16 mm when working on steel 42Total punching timewith pump SC 17-D 8 sec.Throat depth 4-3/8“ – 110 mmMax. pressure 10150 psiPunching power 44 tPunch stroke 25/32“ – 20 mmWeight 77 lbs. – 35 kg

Contents include: APS 110 D Punching Unit, control cable and hydraulic hose 16 ft, spanner, depth fence, suspension hook

ALFRA Hydraulic-Pump SC 17D for APS 110D

Prod.-No.ALFRA Hydraulic-Pump SC 17D double acting 23186.110complete with control and switch box.

With connector for double hose package.This new pump was especially developed to drastically reduce the punching time. Spe-cially suitable for the use in the workshop.

Technical Data:Working pressure max. 1653.1 lbs./cm2 – 750 kg/cm2 (10670 psi)Pump capacity 0.43 Gal/min at 1370 rpmOil quantity 4 1/2 Gal – 17 lSingle phase motor 1370 rpm 1500 W 110v 60 HZWeight incl. oiland transport rollers 103 lbs. – 47 kgDimensions (L x W x H) 21-11/16“ x 14-9/16“ x 22-1/16“ – 550 x 370 x 560 mm


ALFRA – Service-BoyMade in Germany by ALFRA

Prod.-No. 23160 (Tools and Punching Unit/Pump not included)Prod.-No. 23160 (Tools and Punching Unit/Pump not included)

ALFRA – Spring Hoists

Prod.-No. 23152

For Hydraulic Punching Units APS 70 – 120 – 110D –TÜV-certificate –

This handy time- and energy saving cart makes the handling of our Hydraulic Punching Units more comfortable.Absolutely necessary for every structural steel worker- even where our Hydraulic Punching Units are already used.

■ Easy positioning of the Punching Head at the steel girder due to gas pressure shock absorber.

■ When used on the Service Cart the hydraulic pump does not need to be carried any longer.

■ Tool cabinet with drawers for clean arrangement of the punching tools and accessories.

■ Solid and safe construction with TÜV-certificate (tested by the German Technical Supervision Authority)- less expensive than any „self-made“ construction.

■ Dimensions (L x W x H): 35 7/16“ x 20 7/8“ x 78 47/64“ – 900 x 530 x 2000 mm Prod.-No.Complete with tool cabinet and drawers 23160

For ALFRA Press Hydraulic Punching Units Prod.-No.With blocking device, spring fracture safety device, length of cable 6 ft 9362 B 33 - 44 lbs. 15 - 20 kg 231509363 B 44 - 55 lbs. 20 - 25 kg 231519366 B 77 - 99 lbs. 35 - 45 kg 23152

Attention:Actuation of spring hoist only with suspended Punching Unit resp. under load.


ALFRA – Original-ToolsMade in Germany by ALFRA

Prod.-No. 23-02-..Prod.-No. 23-02-..

Tip:Punches and Dies are interchangeable with Nitto/Selfer Punching Systems.Tip:Please oil Punch from time to time, when material is heavily oxidized.

Punches for ... APS 120 APS 70 APS 60 Ø mm Prod. No. Ø Inch Prod. No. APS 110D APS 70 €co ■ ■ ■ 7 23-01-07 - - ■ ■ ■ 8 23-01-08 5/16“ 23-01-08-IN ■ ■ ■ 9 23-01-09 - - ■ ■ ■ 10 23-01-10 - - ■ ■ ■ 11 23-01-11 7/16“ 23-01-11-IN ■ ■ ■ 12 23-01-12 - - ■ ■ ■ 13 23-01-13 - - ■ ■ ■ 14 23-01-14 9/16“ 23-01-14-IN ■ ■ ■ 15 23-01-15 - - ■ ■ ■ 16 23-01-16 5/8“ 23-01-16-IN ■ ■ ■ 17 23-01-17 11/16“ 23-01-17-IN ■ ■ ■ 18 23-01-18 - - ■ ■ - 19 23-01-19 - - ■ ■ - 20 23-01-20 - - ■ ■ - 21 23-01-21 13/16“ 23-01-21-IN ■ ■ - 22 23-01-22 - - ■ - - 23 23-01-23 - - ■ - - 24 23-01-24 15/16“ 23-01-24-IN ■ - - 25*1 23-01-25 1“ *1 23-01-25-IN ■ - - - - 1-1/16“*2 23-01-27-IN

*1) with tension nut Prod.- No. 23004-056B*2) with tension nut Prod.- No. 23004-056D

Prod.-No. 23-01-..

Dies for ...

APS 120 APS 70 APS 60 Ø mm Prod. No. Ø Inch Prod. No. APS 110D APS 70 €co ■ ■ - 7 23-02-07 - - ■ ■ - 8 23-02-08 5/16“ 23-02-08-IN ■ ■ - 9 23-02-09 - - ■ ■ - 10 23-02-10 - - ■ ■ - 11 23-02-11 7/16“ 23-02-11-IN ■ ■ - 12 23-02-12 - - ■ ■ - 13 23-02-13 - - ■ ■ - 14 23-02-14 9/16“ 23-02-14-IN ■ ■ - 15 23-02-15 - - ■ ■ - 16 23-02-16 5/8“ 23-02-16-IN ■ ■ - 17 23-02-17 11/16“ 23-02-17-IN ■ ■ - 18 23-02-18 - - ■ ■ - 19 23-02-19 - - ■ ■ - 20 23-02-20 - - ■ ■ - 21 23-02-21 13/16“ 23-02-21-IN ■ ■ - 22 23-02-22 - - ■ - - 23 23-02-23 - - ■ - - 24 23-02-24 15/16“ 23-02-24-IN ■ - - 25 23-02-25 1“ 23-02-25-IN ■ - - - - 1-1/16“ 23-02-27-IN - - ■ 7 23-03-07 - - - - ■ 8 23-03-08 - - - - ■ 9 23-03-09 - - - - ■ 10 23-03-10 - - - - ■ 11 23-03-11 - - - - ■ 12 23-03-12 - - - - ■ 13 23-03-13 - - - - ■ 14 23-03-14 - - - - ■ 15 23-03-15 - - - - ■ 16 23-03-16 - - - - ■ 17 23-03-17 - - - - ■ 18 23-03-18 - -

Important:On Material mild steel: max. material thickness = 0.8 x hole-ØOn Material medium steel: max. material thickness = 0.5 x hole-Ø


ALFRA – Original-ToolsMade in Germany by ALFRA

Prod.-No. 23-04-.. (for girders with bevelled flanges)(for girders with bevelled flanges)

Prod.-No. 23-01-..

Prod.-No. 23015

Prod.-No. 23020

Prod.-No. 23004-056A Prod.-No. 23004-056BFor Punch Ø 5/16“ - 15/16“ For Punch Ø 1“

Prod.-No. 23020

Prod.-No. 23004-056A Prod.-No. 23004-056B

Spare Parts: Prod.-No.Spare high pressure connection hose, 3 m/10 ft. (for €co Only) 23010cpl. with control cable and coupling

Spare high pressure connection hose, 5 m/16-1/2 ft. 23015cpl. with control cable and coupling Spare high pressure connection hose, *10 m/33 ft. 23016cpl. with control cable and coupling Spare high pressure connection hose, *15 m/50 ft. 23017cpl. with control cable and coupling

Spare high pressure connection hose, 5 m/16-1/2 ft. 23020For APS 70D + 110D ( double hose package)cpl. with control cable and double coupling

*Note:Pressure build-up prolongs to appr. additional 4 sec. (10 m/33 ft. hose), appr. 6 sec. (15 m/50 ft. hose).

Tension nut for punches Ø 5/16“ - 15/16“ – 7 - 24 mm 23004-56ATension nut for punches Ø 1“ – 25 mm (only APS 120) 23004-56BTension nut for punches Ø 1-1/16“ – 26 mm on request only 23004-56C

Oblong tools for ... APS 120 APS 70 mm Punch Prod. No. Die Prod. No. Inch Punch Prod. No. Die Prod. No. APS 110D APS 70 €co ■ ■ 16 x 8 23-01-1608 23-02-1608 5/8“ x 5/16“ 23-01-1608-IN 23-02-1608-IN ■ ■ 18 x 9 23-01-1809 23-02-1809 23/32“ x 23/64“ 23-01-1809-IN 23-02-1809-IN ■ ■ 18 x 11 23-01-1811 23-02-1811 23/32“ x 7/16“ 23-01-1811-IN 23-02-1811-IN ■ ■ 20 x 10 23-01-2010 23-02-2010 51/64“ x 25/64“ 23-01-2010-IN 23-02-2010-IN ■ ■ 20 x 12 23-01-2012 23-02-2012 51/64“ x 15/32“ 23-01-2012-IN 23-02-2012-IN ■ ■ 20 x 14 23-01-2014 23-02-2014 51/64“ x 9/16“ 23-01-2014-IN 23-02-2014-IN ■ ■ 22 x 11 23-01-2211 23-02-2211 7/8“ x 7/16“ 23-01-2211-IN 23-02-2211-IN ■ ■ 22 x 14 23-01-2214 23-02-2214 7/8“ x 9/16“ 23-01-2214-IN 23-02-2214-IN ■ - 24 x 12 23-01-2412 23-02-2412 15/16“ x 15/32“ 23-01-2412-IN 23-02-2412-IN ■ - 25 x 9* 23-01-2509 23-02-2509 1“ x 23/64“* 23-01-2509-IN 23-02-2509-IN ■ - 25 x 12* 23-01-2512 23-02-2512 1“ x 15/32* 23-01-2512-IN 23-02-2512-IN ■ - 25 x 13* 23-01-2513 23-02-2513 1“ x 33/64* 23-01-2513-IN 23-02-2513-IN ■ - 25 x 14* 23-01-2514 23-02-2514 1“ x 9/16* 23-01-2514-IN 23-02-2514-IN ■ - 25 x 18* 23-01-2518 23-02-2518 1“ x 23/32* 23-01-2518-IN 23-02-2518-IN

*) with tension nut Prod.- No. 23004-056B Other dimensions on request

Prod.-No. 23-02-..


quality tools and machines drilling punching...

Documents