quality - ifm · 2021. 2. 6. · 2011 fluid sensors and diagnostic systems bus, identification and...
TRANSCRIPT
QualityQualityMade in GermanyMade in Germany
2011
fluid sensors and diagnostic
systems
bus, identification
and control systems
position sensors
and objectrecognition
visit our website:
www.ifm.com/in
Over 70 locations worldwide – at a glance at wwww.ifm.com
India
ifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 88
E-Mail: [email protected]
We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
04/
11
ifm – the company 6 - 7
General information 8 - 9
Standards and approvals / list of articles 10 - 15
Sensors for special applications 16 - 17
Inductive sensors 18 - 46
Capacitive sensors 48 - 54
Magnetic sensors 56 - 59
Cylinder sensors 60 - 65
Valve sensors 66 - 69
Photoelectric sensors 15 - 101
Encoders 102 - 105
Evaluation systems 106 - 110
Level sensors 112 - 115
Flow sensors 116 - 121
Pressure sensors 122 - 131
Temperature sensors 132 - 136
Diagnostic systems 138 - 140
Bus system AS-interface 142 - 145
Control systems for mobile vehicles 146 - 150
Power supplies 152 - 155
Connection technology 156 - 166
ifm – worldwide addresses 168 - 169
The company in your vicinity.
State-of-the-art communication.
With the right address – www.ifm.com – only a mouse click separates you from theworld of automation technology. See the power of our products in interactiverepresentations. Gain an impression with 3-dimension-al views of our units. Down-load CAD drawings for direct integration in your applications. Or order online inifm’s e-shop - fast, convenient and reliable.
We are there for you.
Close contact with our customers is part of our success. Therefore we haveconsistently developed our sales network right from the start. Today ifm electronic isrepresented in more than 70 countries – close to you! With application advice andservice at the heart of our operation. For the introduction of new products andtechnologies we support you with workshops and seminars in our training centres orin your plant.
Security by success.
Since its foundation in 1969 ifm electronic has constantly grown, now having morethan 3500 employees worldwide, and achieved a turnover of more than EUR 470million in 2010. This success gives you the security of having a reliable partner for theimplementation of your automation projects. Comprehensive service and a warrantyof up to 5 years on standard units are just two examples of this reliability.
2000 2010199019801970
100
0
200
300
400
500
sale
s de
velo
pmen
t in
mill
ion
EU
R
Turnoverdevelopmentsince 1970.
ifm – the company
6
branch officetrade partner
ifm – the company
7
A sign of innovation.
Not only components.
ifm stands for a large range of different sensors and systems for automation. Ourrange of of more than 7,800 articles guarantees flexibility and compatibility. So thereis always a reliable solution for your automation projects – from the individual sensorwith practical accessories to the complete system.
Availability guaranteed.
Your deadlines matter to us. That is why we are constantly optimising our productionprocesses in order to be able to quickly and flexibly produce large quantities at aconstantly high quality – and to continue to shorten delivery times. Your order isdispatched via our centralised logistics centre reliably and on time.
Quality as part of our philosophy.
The quality standard of our products is an integral part of our company philosophy.And we guarantee it! So we provide you, the users, with a maximum degree ofsecurity: By means of our own production technology, ifm film technology, as well asby means of extensive quality assurance measures such as 100 % final testing.By quality we understand, for example, ecologically conscious production – Made inGermany!
The developmentof innovativeproducts is oneof our corecompetences.Under the name ofi-step we havecome up with anew product gene-ration whichimplements sophi-sticated technolo-gies in industriallycompatible andeasy to handleproducts. Fromhigh-quality stan-dard solutions toproducts speciallytailored to therequirements ofthe individualindustries – frommobile machinesto the foodindustry.
www.ifm.comInformation around the clock andaround the globe in 23 languages on the internet.
• Information
- product innovations- company news- exhibition info- locations- jobs
• Documentation
- data sheets- operating instructions- manuals- approvals- CAD data
• Communication*
- request for documents- recall service- live advice- newsletter
• Selection
- interactive product selection aids- configuration tools- data sheet direct
• Animation
- virtual product animations- flash movies (video sequences)
• Application
- applications- product recommendations- calculation aids
• Transaction*
- e-shop processing- e-procurement catalogues- B2B services
*Some offered information is available country-specific
General information
Product selectors and further information can be found at: www.ifm.com
8
General information
Product selectors and further information can be found at: www.ifm.com
9
Convenient order processingvia the e-shop** on the internet.
Secured authentication
Customer-related priceindication
Real time availability check
Personal product favourites
Online parcel tracking
Individual order history
Convenient quick input form
Simple order processing
Management of shippingaddresses
Confirmations by e-mail
** Already available in many countries.
3A 3A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporationdedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries.
AS-i Actuator-Sensor Interface. Bus system for the first binary field level.
ATEX Atmosphère Explosible. ATEX comprises the directives of the European Union in thefield of explosion protection. On the one hand there is the 94/9/EC ATEX productdirective and on the other hand the 1999/92/EC ATEX operation directive.
CCC CCC (China Compulsory Certification) is a compulsory Chinese certification for cer-tain products put on the market in China. Which products are concerned is specifiedin a catalogue created by the Chinese authorities.
cCSAus Testing a product by CSA according to the safety standards applicable in Canada andthe USA.
CE Conformité Européenne. By affixing the CE marking to a product, the manufacturerdeclares that it meets EU safety, health and environmental requirements.
cRUus Testing components by UL according to the safety standards applicable in Canadaand the USA. Components can be used when the “condition of acceptability” iscomplied with for the final product.
CSA Canadian Standards Association. A non-governmental Canadian organisation thatsets standards and tests and certifies products for their reliability. By now it is activeworldwide.
cULus Testing components by UL according to the safety standards applicable in Canadaand the USA.
DIBt (WHG) Deutsches Institut für Bautechnik (Federal Water Act). The Federal Water Act (WHG)is the essential part of the German law relating to water . It contains provisions forthe protection and use of surface water and ground water and also regulationsabout the expansion of waters, water planning and flood protection.
e1 Approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority).The e1 type approval by the German Federal Motor Transport Authority certifies thatthe units comply with the automotive standards. Units with this marking are allowedto be mounted on vehicles without expiry of their operating permit.
EHEDG European Hygienic Engineering & Design Group. European supervisory authority forfood and drugs. This authority grants approvals for products and materials used inthe food and pharmaceutical industries.
FDA Food and Drug Administration. US-American supervisory authority for food anddrugs. This authority grants approvals for products and materials used in the foodand pharmaceutical industries.
Standards and approvals /list of articles
10
FM Factory Mutual Research. A US-based insurance company that specializes in loss prevention services in the property insurance market sector. They provide materialresearch, material testing and certifications in the field of fire and explosion pro-tection.
PROFIBUS Process Field Bus. Fieldbus system for important data quantities. It is available in several versions such as Profibus FMS, DP or PA. Profibus DP can be used over longerdistances, e.g. as fieldbus for AS-i.
TÜV Technischer Überwachungs Verein (technical inspection association). The GermanTÜV is a private-sector body carrying out technical safety tests that are stipulated bygovernment laws or instructions.
UL Underwriters Laboratories. An organisation founded in the USA for testing and certifying products and their safety.
Standards and approvals /list of articles
11
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
12
Orderno.
Approvals Cataloguepage
AC3000 144
AC4000 CE 145
AC5000 CUL 144
AC5031 144
AC5205 CE, CUL 144
AC5208 CE, CUL 144
CR1070 CE, E1 148
DD0001 CE 108
DD0116 CE, CUL 108
DD2003 CE, CUL 108
DI0001 CE 108
DI001A CE 109
DI5003 CE 108
DI5004 CE 108
DN1020 CE, CUL 154
DN2011 CE, CUL 154
DN2012 CE, CUL 154
DN2013 CE, CUL 154
DN2014 CE, CUL 154
DN2034 CE, CUL 154
E10017 127, 134, 36
E10077 109, 37, 52
E10189 160
E10191 160
E10200 160
E10735 149, 37, 52
E10736 109, 149, 37
E10737 109, 149, 37
E10754 58
E10803 144
E10806 37
E10807 37
E10848 36
E10865 158
E10867 158
E11048 149, 37, 58
E11115 37
E11250 CRUUS 160
E11420 162
E11504 CRUUS 160
E11505 CRUUS 160
E11506 CRUUS 161
E11508 CRUUS 158
E11509 CRUUS 158
E11550 160
E11664 140
E11797 63
E11799 63
E11818 63
E11872 64
Orderno.
Approvals Cataloguepage
E12166 159
E17105 68
E17324 68
E20004 78
E20005 78
E20452 78
E20453 78
E20454 78
E20495 95
E20633 94
E20645 94
E20715 94
E20718 37, 52, 58
E20722 100, 87
E20956 78
E20988 86
E21015 78
E30006 114, 127
E30007 114, 128
E30050 128
E30052 FDA 114, 128
E30094 128, 135
E30393 EHEDG 135
E33001 114, 128
E33031 128
E40048 120
E40096 119, 135
E40098 119, 135
E40099 119, 135
E40107 135
E40124 119, 135
E43006 114
E43204 114
E60063 104
E60067 104
E60118 104
E60122 104
E60141 104
E70096 144
E70413 145
E73004 144
EC1450 149
EC1453 149
ENC05A 162
EVC001 CRUUS 159
EVC002 CRUUS 159
EVC003 CRUUS 159
EVC004 CRUUS 158
EVC005 CRUUS 159
EVC006 CRUUS 159
Standards and approvals /list of articles
(CCC) = CCC approval is not required
13
Orderno.
Approvals Cataloguepage
EVC007 CRUUS 159
EVC008 CRUUS 159
EVC009 CRUUS 159
EVC013 CRUUS 161
EVC014 CRUUS 161
EVC015 CRUUS 161
EVC016 CRUUS 161
EVC017 CRUUS 161
EVC018 CRUUS 161
EVC019 CRUUS 161
EVC022 CRUUS 161
EVC023 CRUUS 161
EVC024 CRUUS 161
EVC05A 162
EVC071 CRUUS 159
EVC076 CRUUS 160
EVC142 CRUUS 158
EVC150 CRUUS 158
EVC151 CRUUS 158
EVC154 CRUUS 158
EVT001 CRUUS 162
EVT004 CRUUS 162
EVT005 CRUUS 162
G1501S CE, CUL, TuevNord 35
GM701S CE, CUL, TuevNord 35
IA5122 CCC, CE, CUL 24
IB0016 CCC, CE, CUL 28
IB0026 CCC, CE 27
IB5063 CE, CUL, (CCC) 25
IB5096 CE, (CCC) 24
IB5124 CCC, CE, CUL 25
IB5133 CE, (CCC) 25
IC5005 CE, CUL, (CCC) 27
ID0013 CCC, CE, CUL 28
ID5005 CE, CUL, (CCC) 27
ID5055 CE, CUL, (CCC) 27
IE5072 CE, (CCC) 22
IE5090 CE, CUL, (CCC) 22
IE5099 CE, (CCC) 22
IE5202 CE, (CCC) 22
IE5222 CE, (CCC) 22
IE5287 CE, CUL, (CCC) 22
IE5312 CE, (CCC) 22
IE5338 CE, CUL, (CCC) 22
IE5343 CE, CUL, (CCC) 22
IE5351 CE, CUL, (CCC) 22
IE5368 CE, CUL, (CCC) 22
IEC200 CE, CUL, (CCC) 32
IF5249 CE, (CCC) 23
IF5329 CE, (CCC) 23
Orderno.
Approvals Cataloguepage
IF5645 CCC, CE 23
IF5647 CCC, CE, CUL 23
IFC200 CE, CUL, (CCC) 30
IFC204 CE, CUL, (CCC) 30
IFC205 CE, CUL, (CCC) 31
IFC208 CE, CUL, (CCC) 31
IFC210 CE, CUL, (CCC) 31, 33
IFR200 CE, CUL, (CCC) 33
IFS200 CE, CUL, (CCC) 20
IFS201 CE, CUL, (CCC) 20
IFS204 CE, CUL, (CCC) 20
IFS205 CE, CUL, (CCC) 20
IFS206 CE, CUL, (CCC) 20
IFS208 CE, CUL, (CCC) 20
IFS212 CE, CUL, (CCC) 20
IFS213 CE, CUL, (CCC) 20
IFS216 CE, CUL, (CCC) 22
IFT200 CE, CUL, (CCC) 28
IFT205 CE, CUL, (CCC) 28
IFW200 CE, CUL, (CCC) 34
IG0006 CE, CUL, CCC 27
IG0011 CCC, CE, CUL 27
IG0012 CCC, CE 27
IG500A CCC, CE 36
IG5221 CE, (CCC) 23
IG5398 CE, (CCC) 23
IG5401 CE, (CCC) 23
IG5593 CE, CCC 23
IG5594 CCC, CE 23
IG5647 CE, CUL, (CCC) 34
IG5719 CCC, CE 23
IG5813 CE, (CCC) 30
IG5953 CE, (CCC) 21
IGC200 CE, CUL, (CCC) 31
IGC201 CE, CUL, (CCC) 31
IGC204 CE, CUL, (CCC) 31
IGC205 CE, CUL, (CCC) 31
IGC207 CE, CUL, (CCC) 31
IGC208 CE, CUL, (CCC) 31
IGC210 CE, CUL, (CCC) 31, 33
IGC233 CE, CUL, (CCC) 33
IGC248 CE, CUL 32
IGC249 CE, CUL 32
IGM200 CE, E1, (CCC) 148, 35
IGM202 CE, CUL, E1, (CCC) 148, 35
IGR200 CE, CUL, (CCC) 33
IGS200 CE, CUL, (CCC) 21
IGS201 CE, CUL, (CCC) 21
IGS204 CE, CUL, (CCC) 20
IGS205 CE, CUL, (CCC) 20
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
14
Orderno.
Approvals Cataloguepage
IGS206 CE, CUL, (CCC) 20
IGS208 CE, CUL, (CCC) 21
IGT202 CE, CUL, (CCC) 29
IGT203 CE, CUL, (CCC) 29
IGT205 CE, CUL, (CCC) 29
IGT208 CE, CUL, (CCC) 29
IGT247 CE, CUL, (CCC) 30
IGW200 CE, CUL, (CCC) 34
IGW201 CE, CUL, (CCC) 34
II0006 CE, CCC 27
II0011 CE, CUL, CCC 27
II0012 CE, CUL, CCC 27
II5284 CE, (CCC) 23
II5489 CE, CCC 24
II5490 CE, CCC 24
II5491 CCC, CE 24
II5492 CE, CCC 24
II5493 CE, CCC 24
II5751 CCC, CE 30
IIC208 CE, (CCC) 32
IIC210 CE, CUL, (CCC) 32
IIC211 CE, CUL, (CCC) 32
IIR200 CE, CUL, (CCC) 33
IIS204 CE, CUL, (CCC) 21
IIS205 CE, CUL, (CCC) 21
IIS206 CE, CUL, (CCC) 21
IIS210 CE, CUL, (CCC) 21
IIT002 CCC, CE, CUL 29
IIT202 CE, CUL, (CCC) 29
IIT204 CE, CUL, (CCC) 29
IIT212 CE, CUL, (CCC) 29
IIT213 CE, CUL, (CCC) 29
IIT228 CE, CUL, (CCC) 30
IIW200 CE, CUL, (CCC) 34
IIW201 CE, CUL, (CCC) 34
IL5002 CE, CUL, (CCC) 25
IL5004 CE, CUL, (CCC) 25
IM0010 CCC, CE, CUL 28
IM0011 CCC, CE, CUL 28
IM0053 CCC, CE 28
IM5020 CE, CUL, (CCC) 26
IM5037 CCC, CE 26
IM5115 CE, CUL, (CCC) 26
IM5116 CE, CUL, (CCC) 26
IM5117 CE, CUL, (CCC) 26
IM5119 CE, CUL, (CCC) 26, 34
IM5123 CE, CUL, (CCC) 26
IM5126 CE, CUL, (CCC) 26, 34
IM5136 CE, CUL, (CCC) 26
IN0073 CCC, CE 28
Orderno.
Approvals Cataloguepage
IN0110 CCC, CE 68
IN5208 CCC, CE, CUL 25
IN5212 CE, CUL, (CCC) 26
IN5224 CE, (CCC) 68
IN5225 CE, CUL, (CCC) 68
IS5001 CE, CUL, (CCC) 25
IS5031 CE, CUL, (CCC) 25
IS5070 CE, (CCC) 25
IT5042 CE, CUL, (CCC) 24
IY5029 CE, (CCC) 21
IY5052 CE, (CCC) 21
KB5004 CE, CUL, (CCC) 50
KF5001 CE, CUL 50
KG5043 CE, (CCC) 50
KG5057 CE, (CCC) 50
KG5065 CE, CUL 51
KI0016 CCC, CE, CUL 51
KI0042 CE 51
KI5002 CE, CUL, (CCC) 50
KI5023 CCC, CE, CUL 50
KI5038 CE, (CCC) 50
KI5065 CE 51
KI5087 CE, CUL 50
LR7000 CE, CUL 114
MFS200 CE, CUL, (CCC) 58
MFS201 CE, CUL, (CCC) 58
MGS200 CE, CUL, (CCC) 58
MK5100 CE, CUL, (CCC) 62
MK5101 CE, CUL, (CCC) 62
MK5103 CE, CUL, (CCC) 62
MK5108 CE, CUL, (CCC) 62
MK5111 CE, CUL, (CCC) 62
MK5114 CE, CUL, (CCC) 62
MK5117 CE, CUL, (CCC) 62
MK5140 CE, CUL, (CCC) 63
MK5300 CE, CUL, (CCC) 63
MK5314 CE, CUL, (CCC) 63
NG5002 CCSAUS, CE, FM, IEC 35
NG500A CCSAUS, CE, FM 36
NM501A CCSAUS, CE, FM 36
NN5009 CCSAUS, CE, FM 68
O1D100 CE, CUL, (CCC) 90
O1D101 CE, CUL, (CCC) 86
O1D105 CE, CUL, (CCC) 90
O1D106 CE, CUL, (CCC) 90
O5E200 CE, CUL, (CCC) 77
O5H200 CE, CUL, (CCC) 77
O5H500 CE, CUL, (CCC) 77
O5K500 CE, CUL, (CCC) 100
O5P200 CE, CUL, (CCC) 77
Standards and approvals /list of articles
(CCC) = CCC approval is not required
15
Orderno.
Approvals Cataloguepage
O5P500 CE, CUL, (CCC) 77
O5S200 CE, CUL, (CCC) 76
OBF500 CE, CUL, (CCC) 94
OF5012 CE, CUL, (CCC) 74
OGE100 CE, CUL, (CCC) 74
OGE200 CE, CUL, (CCC) 74
OGE500 CE, CUL, (CCC) 75
OGH200 CE, CUL, (CCC) 75
OGH500 CE, CUL, (CCC) 75
OGH700 CE, CUL, (CCC) 86
OGP100 CE, CUL, (CCC) 74
OGP101 CE, CUL, (CCC) 74
OGP200 CE, CUL, (CCC) 74
OGP201 CE, (CCC) 74
OGP500 CE, CUL, (CCC) 75
OGP700 CE, CUL, (CCC) 86
OGS100 CE, CUL, (CCC) 74
OGS200 CE, CUL, (CCC) 74
OGS500 CE, CUL, (CCC) 75
OGT100 CE, CUL, (CCC) 75
OGT200 CE, CUL, (CCC) 75
OGT500 CE, CUL, (CCC) 75
OH5008 CE, (CCC) 76
OJ5026 CE, CUL, (CCC) 76
OJ5044 CE, CUL, (CCC) 76
OJ5048 CE, CUL, (CCC) 76
OJ5058 CE, CUL, (CCC) 86
OJ5136 CE, CUL, (CCC) 86
OJ5148 CE, CUL, (CCC) 76
OK5001 CCC, CE, CUL 94
OL0004 CCC, CE 78
OL0005 CCC, CE 78
OL0006 CE 77
OL0007 CCC, CE 77
OPU200 CE, (CCC) 100
OPU203 CE, CUL, (CCC) 100
OU5043 CCC, CE, CUL 94
PA3020 CE, CUL 126, 148
PA3021 CE, CUL 126, 148
PA3022 CE, CUL 126, 148
PA3023 CE, CUL 126, 148
PA3024 CE, CUL 127, 148
PA9020 CE 127, 148
PA9021 CE 127, 149
PK5520 CE, CUL 125
PK5521 CE, CUL 125
PK5522 CE, CUL 125
PK5523 CE, CUL 125
PK6521 CE, CUL 126
PK6522 CE, CUL 126
Orderno.
Approvals Cataloguepage
PK6524 CE, CUL 126
PK8730 CE, CUL 126
PM2054 CE, CUL, EHEDG, FDA 127
PM2058 CE, CUL, EHEDG, FDA 127
PM2654 CE, CUL, EHEDG, FDA 127
PN2009 CE, CUL 124
PN2020 CE, CUL 124
PN2021 CE, CUL 124
PN2024 CE, CUL 124
PN2221 CE, CUL 124
PN2223 CE, CUL 124
PN3000 CE, CUL 124
PN3004 CE, CUL 124
PN3060 CE 124
PN5000 CE, CUL 124
PN5001 CE, CUL 124
PN5002 CE, CUL 124
PN5003 CE, CUL 125
PN5004 CE, CUL 125
PN5006 CE, CUL 125
PN7000 CE, CUL 125
PN7001 CE, CUL 125
PN7002 CE, CUL 125
PN7003 CE, CUL 125
PN7004 CE, CUL 125
PT3542 CE, CUL 126
PT3544 CE, CUL 126
RA6015 CE, C_NRTL_US 104
RV6016 CE, C_NRTL_US 104
RV6024 CE, C_NRTL_US 104
SI5000 CE, CUL 118
SI5002 CE, CUL 118
SI5004 CE, CUL 118
SI5006 CE, CUL 118
SI5007 CE, CUL 118
SI5010 CE, CUL 118
SL0101 CE 119
SL0201 CE 119
SU8000 CE, CUL 119
SU9000 CE, CUL 119
TA3130 CE, CUL 134
TA3430 CE, CUL, EHEDG 134
TN2531 CE, CUL 134
TR2432 CE, CUL 134
VKV021 CE, CUL 140
VSA001 CE, CUL 140
Sensors for special applications
Product selectors and further information can be found at: www.ifm.com
16
ATEX ATEX (Atmosphère explosible) is a brief description of the uniform EU directives94/9/EC (for manufactures of units for hazardous areas) and 1999/92/EC (for opera-tors of plants for hazardous areas) governing the safety requirements for explosion-hazardous areas. Since 30 June 2003, units for hazardous areas have to be approvedto 94/9/EU regulations. For further information about international directives see the“Approvals” chapter.
e1 type approval The e1 type approval by the German Federal Motor Transport Authority certifies thatthe units comply with the automotive standards.
IO-Link IO-Link is a field-bus independent and open point-to-point communication interface.It is a low-cost possibility to transmit parameter, diagnosis and process data from asensor or an actuator via an I/O module.
Safety The EC Machinery Directive stipulates machinery should not present a risk. If safety is dependent on control systems, these must be designed so as to minimise malfunction. The IEC 62061 und ISO 13849-1 standards apply. Classification is madeeither in the Safety Integrity Level (SIL 1-3 in IEC 62061) or in the Performance Level (PL a-e in ISO 13849-1).
Sensors for special applications
Product selectors and further information can be found at: www.ifm.com
17
Sensors for hazardous areas (ATEX) Page
Inductive sensors 35 - 36
Capacitive sensors 51
Valve sensors 68
Sensors with e1 approval Page
Inductive sensors 148
Pressure sensors 148 - 149
Sensors with IO-Link Page
Temperature sensors 134 - 134
Sensors for safety technology Page
Inductive sensors 35
Sensors for almost all application areas.
Wide choice of housing styles andoperating voltages.
High-quality housing materials.
Cylindrical housings: Ø 3…34 mm, rectan-gular housings: 5 x 5 x 24 to 105 x 80 x 40.
Extensive range of fixing accessoriesand connection technology.
Inductive sensors
In all automated processes sensors are absolutely necessary to provide the PLC withinformation. They supply the necessary signals on positions, limits or serve as pulsepick-ups for counting tasks or for monitoring rotational speed. Inductive andcapacitive sensors are nowadays indispensable for industrial usage. As compared tomechanical switches they offer ideal conditions: non-contact operation free fromany wear and tear, high switching frequencies and accuracy. In addition, they areinsensitive to vibration, dust and moisture. Inductive sensors detect all metalswithout contact.
Operating principle of inductive sensors
Inductive sensors take advantage of the physical effect of the change in the qualityfactor in a resonant circuit caused by eddy current losses in conductive materials.This is how it works: An LC tuned circuit generates a high frequency electromag-netic field. This field is radiated from the active face of the sensor. If a conductivematerial enters this field, eddy currents will be formed in accordance with the lawof inductance which draw energy from the oscillator. This reduces the oscillationamplitude. The change is converted into a switching signal. The operating principlepermits detection of all metals irrespective of whether they are moving or not.
Application sensors
Every application has its own requirements as regards the sensors to be used.Temperature shocks, mechanical influences or aggressive cleaning agents are just afew of the possible environmental influences to which sensors are subjected. ifmelectronic therefore offers inductive sensors which have been developed for specialapplications. This includes for example the use of selected housing materials suchas stainless steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealingconcept from the sensor to the connector ensures ideal protection against ingressof moisture and aggressive media.
Typical application:Positioning sensing inautomation technol-ogy; inductive sensorsoperate reliably andwithout wear.
High frequencyelectromagnetic field:The inductive sensor
detects all metals.
Inductive sensors
18
System overview Page
Sensors with increased sensing range for industrial applications 20 - 21
Sensors for industrial applications, threaded housings 21 - 24
Sensors with smooth sleeve for industrial applications 24 - 25
Sensors for industrial applications, rectangular housings 25 - 27
Sensors for industrial applications, AC and AC/DC 27 - 28
Sensors for hygienic and wet areas with increased sensing range 28 - 29
Full metal sensors for hygienic and wet areas 30
Sensors for hygienic and wet areas 30
Sensors for oils and coolants with increased sensing range 30 - 32
Full metal sensors for oils and coolants 32
Full metal sensors for oils and coolants with correction factor K = 0 32
Sensors for oils and coolants with correction factor K = 1 33
Sensors for oils and coolants with ceramic sensing face 33
Full metal sensors with non-stick coating against weld spatter 33
Electromagnetic field immune sensors with correction factor K = 1 34
Electromagnetic field immune sensors 34
Sensors for mobile applications 35
Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e 35
Safety relays with relay outputs for fail-safe sensors 35
Sensors with ATEX approval 1D / 2G 35
Sensors with ATEX approval 1D / 1G / 2G 36
Sensors with ATEX approval 3D 36
Accessories for sensors with smooth sleeve 36
Accessories for threaded M8 housings 36
Accessories for threaded M12 housings 37
Accessories for threaded M18 housings 37
Accessories for threaded M30 housings 37
System components 37
Wiring diagrams 38 - 39
Scale drawings / drawing no. – CAD download: www.ifm.com 39 - 46
Inductive sensors
19
Sensors with increased sensing range for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS204
M12 / L = 50 7 nf brass 10...36 IP67 700 100 2 IFS205
M12 / L = 70 4 f brass 10...36 IP67 700 100 3 IFS212
M12 / L = 70 7 nf brass 10...36 IP67 700 100 4 IFS213
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS206
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M12 / L = 70 4 f brass 10...30 IP67 500 100 3 IFS208
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 5, 6
M12 / L = 45 4 f brass 10...30 IP67 700 100 1 IFS200
M12 / L = 50 7 nf brass 10...30 IP67 700 100 2 IFS201
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 46 8 f brass 10...36 IP67 400 100 5 IGS204
M18 / L = 51 12 nf brass 10...36 IP67 300 100 6 IGS205
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M18 / L = 46 8 f brass 10...36 IP67 400 100 5 IGS206
Inductive sensors
20Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M18 / L = 70 8 f brass 10...30 IP67 400 100 7 IGS208
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 5, 6
M18 / L = 46 8 f brass 10...30 IP67 300 100 5 IGS200
M18 / L = 51 12 nf brass 10...30 IP67 250 100 6 IGS201
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 15 · Connector groups 5, 6
M18 / L = 70 8 f CuZn 10...36 IP68 400 100 8 IG5953
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M30 / L = 50 15 f brass 10...36 IP67 100 100 9 IIS204
M30 / L = 50 22 nf brass 10...36 IP67 100 100 10 IIS205
M30 / L = 70 15 f high-grade st. steel 10...36 IP67 100 100 11 IIS210
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M30 / L = 70 15 f brass 10...36 IP67 100 100 11 IIS206
f = flush / nf = non flush
Sensors for industrial applications, threaded housings
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M5 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 12 IY5029
M5 / L = 23 1.2 f stainless steel 10...30 IP65 < 2000 100 13 IY5052
Inductive sensors
21You can find wiring diagrams and scale drawings from page 38
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M8 / L = 35 1 f brass 10...36 IP67 750 200 14 IE5072
M8 / L = 27 2 f high-grade st. steel 10...30 IP67 1500 100 15 IE5368
M8 / L = 35 2 nf PBT 10...36 IP67 800 200 14 IE5099
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 16
M8 / L = 50 1 f brass 5...36 IP67 2000 200 16 IE5222
M8 / L = 50 2 nf PBT (Pocan) 5...36 IP67 2000 200 16 IE5202
Cable 2 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 17
M8 / L = 37 3 f brass 10...30 IP67 1000 100 17 IE5343
Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connec-tor groups 5, 6, 7
M8 / L = 37 3 f brass 10...30 IP67 1000 100 17 IE5351
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 1
M8 / L = 50 2 f brass 10...36 IP67 1000 250 18 IE5287
M8 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector group 1
M8 / L = 40 3 f brass 10...30 IP67 1000 100 19 IE5338
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M8 / L = 53 1 f brass 10...36 IP67 750 200 20 IE5090
M8 / L = 62 2 f brass 10...36 IP67 1000 250 21 IE5312
M12 / L = 70 2 f brass 10...36 IP67 700 100 3 IFS216
Inductive sensors
22Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M12 / L = 35 4 nf brass 10...36 IP67 1500 150 22 IF5249
M12 / L = 71 4 nf brass 10...36 IP67 1500 250 23 IF5329
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 16
M12 / L = 71 2 f brass 10...55 IP67 1100 400 24 IF5645
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 15 · Connector groups 5, 6
M12 / L = 83 4 nf brass 10...55 IP67 1500 300 25 IF5647
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M18 / L = 38 5 f brass 18...36 IP67 500 150 26 IG5221
M18 / L = 80 8 nf brass 10...36 IP67 300 250 27 IG5398
M18 / L = 80 8 nf PBT 10...36 IP67 300 250 28 IG5401
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 16
M18 / L = 80 5 f PBT 10...55 IP67 700 400 28 IG5593
M18 / L = 80 5 f brass 10...55 IP67 700 400 28 IG5594
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
M18 / L = 110 8 nf PBT 10...55 IP65 300 400 29 IG5719
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M30 / L = 81 15 nf brass 10...36 IP67 250 250 30 II5284
Inductive sensors
23You can find wiring diagrams and scale drawings from page 38
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 16
M30 / L = 45 10 f brass 10...55 IP67 450 400 31 II5493
M30 / L = 81 10 f brass 10...55 IP67 450 400 32 II5489
M30 / L = 81 15 nf brass 10...55 IP67 200 400 30 II5491
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 15 · Connector groups 5, 6
M30 / L = 78 10 f brass 10...55 IP67 450 400 33 II5490
M30 / L = 78 15 nf brass 10...55 IP67 200 400 34 II5492
f = flush / nf = non flush
Sensors with smooth sleeve for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
Ø 6.5 / L = 27 2 f high-grade st. steel 10...30 IP67 1500 100 35 IT5042
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
Ø 20 / L = 92 10 nf PBT 10...55 IP65 300 300 36 IA5122
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
Ø 34 / L = 82 20 nf PBT 10...36 IP67 60 250 37 IB5096
Inductive sensors
24Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
Ø 34 / L = 98 20 nf PBT 10...55 IP65 300 300 38 IB5124
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 4
Ø 34 / L = 98 20 nf PBT 10...36 IP65 350 250 38 IB5063
Ø 34 / L = 98 30 nf PBT 10...36 IP65 350 200 38 IB5133
f = flush / nf = non flush
Sensors for industrial applications, rectangular housings
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
40 x 8 x 8 2 f brass 10...36 IP65 2000 250 39 IL5002
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 1
40 x 8 x 8 2 f brass 10...36 IP65 2000 250 40 IL5004
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
28 x 10 x 16 2 f PBT 10...36 IP67 800 200 41 IS5001
28 x 10 x 16 3 nf PBT 10...36 IP67 100 200 41 IS5031
28 x 10 x 16 4 nf PBT 10...36 IP67 2000 250 42 IS5070
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 16
40 x 12 x 26 4 nf PBT 10...55 IP67 1200 400 43 IN5208
Inductive sensors
25You can find wiring diagrams and scale drawings from page 38
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 1
40 x 12 x 26 4 nf PBT 10...36 IP65 1300 250 44 IN5212
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 45 IM5115
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 46 IM5119
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 45 IM5116
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 60 200 45 IM5117
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 5 · Connector groups 5, 6
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 45 IM5123
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 5 · Connector groups 5, 6, 7
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 60 200 45 IM5136
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 5
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 46 IM5126
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 4
40 x 40 x 120 15 f PPE 10...36 IP65 350 250 47 IM5020
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
40 x 40 x 120 15 f PPE 10...55 IP65 > 350 400 47 IM5037
Inductive sensors
26Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 19
90 x 60 x 40 40 nf PPE 10...36 IP65 15 250 48 IC5005
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
92 x 80 x 40 50 f PPE 10...36 IP67 70 250 49 ID5055
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 19
105 x 80 x 40 60 nf PPE 10...36 IP65 100 250 50 ID5005
f = flush / nf = non flush
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 6
M18 / L = 80 5 f brass 20...250 IP67 25 / 50 350 / 100 28 IG0011*
M18 / L = 80 8 nf PBT 20...250 IP67 25 / 50 350 / 100 28 IG0006*
M18 / L = 80 8 nf brass 20...250 IP67 25 / 50 350 / 100 27 IG0012*
M30 / L = 81 10 f brass 20...250 IP67 25 / 50 350 / 100 32 II0011*
M30 / L = 81 15 nf PBT 20...250 IP67 25 / 50 350 / 100 32 II0006*
M30 / L = 81 15 nf brass 20...250 IP67 25 / 50 350 / 100 30 II0012*
Ø 34 / L = 82 30 nf PBT 20...250 IP67 25 / 50 350 / 100 37 IB0026*
Inductive sensors
27You can find wiring diagrams and scale drawings from page 38
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 7
Ø 34 / L = 98 20 nf PBT 20...250 IP65 25 / 50 350 / 100 38 IB0016*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 6
40 x 12 x 26 2 f PBT 20...250 IP67 25 / 50 350 / 100 43 IN0073*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 7
40 x 40 x 120 15 f PPE 20...250 IP65 20 / 55 350 / 100 47 IM0011*
40 x 40 x 120 20 nf PPE 20...250 IP65 20 / 55 350 / 100 47 IM0010*
M12 connector · Output function · 2-wire · AC/DC · Wiring diagram no. 8 · Connector group 4
40 x 40 x 66 35 nf PPE 20...250 IP67 20 / 50 350 / 100 51 IM0053*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 20
105 x 80 x 40 60 nf modified PPE 20...250 IP65 4 350 / 100 50 ID0013*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for hygienic and wet areas with increased sensing range
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M12 / L = 50 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 52 IFT200
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector group 19
M12 / L = 70 4 f high-grade st. steel 10...36 IP68 / IP69K 500 100 3 IFT205
Inductive sensors
28Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M18 / L = 46 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 5 IGT203
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector group 19
M18 / L = 70 8 f high-grade st. steel 10...30 IP68 / IP69K 400 100 53 IGT205
M18 / L = 70 12 nf high-grade st. steel 10...30 IP68 / IP69K 300 100 54 IGT202
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M18 / L = 62 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 55 IGT208
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M30 / L = 70 15 f high-grade st. steel 10...36 IP68 / IP69K 50 100 11 IIT212
M30 / L = 70 22 nf high-grade st. steel 10...36 IP68 / IP69K 100 100 56 IIT213
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector group 19
M30 / L = 70 14 f high-grade st. steel 10...36 IP68 / IP69K 50 100 11 IIT204
M30 / L = 70 22 nf high-grade st. steel 10...36 IP68 / IP69K 100 100 56 IIT202
1/2“ UNF-Connector · Output function · 2-wire · AC/DC · Wiring diagram no. 9 · Connector group 10
M30 / L = 70 22 nf high-grade st. steel 20...140 IP68 / IP69K 25 / 100 200 57 IIT002
f = flush / nf = non flush
Inductive sensors
29You can find wiring diagrams and scale drawings from page 38
Full metal sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M18 / L = 70 5 f high-grade st. steel 10...36 IP68 / IP69K 100 100 58 IGT247
M30 / L = 70 10 f high-grade st. steel 10...36 IP68 / IP69K 50 100 59 IIT228
f = flush / nf = non flush
Sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M18 / L = 76 5 f high-grade st. steel 10...36 IP67 500 250 60 IG5813
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 15 · Connector group 19
M30 / L = 92 10 f high-grade st. steel 10...55 IP67 450 400 61 II5751
f = flush / nf = non flush
Sensors for oils and coolants with increased sensing range
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC204
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 5, 6
M12 / L = 45 4 f brass 10...30 IP68 700 100 1 IFC200
Inductive sensors
30Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M12 / L = 50 7 nf brass 10...36 IP68 700 100 2 IFC205
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M12 / L = 50 7 nf brass 10...36 IP68 700 100 2 IFC208
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 46 8 f brass 10...36 IP68 400 100 5 IGC204
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M18 / L = 46 8 f brass 10...36 IP68 400 100 5 IGC207
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 5, 6
M18 / L = 46 8 f brass 10...30 IP68 400 100 5 IGC200
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M18 / L = 70 8 f brass 10...30 IP68 400 100 7 IGC210
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 51 12 nf brass 10...36 IP68 300 100 6 IGC205
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M18 / L = 51 12 nf brass 10...36 IP68 300 100 6 IGC208
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 14 · Connector groups 5, 6
M18 / L = 51 12 nf brass 10...30 IP68 250 100 6 IGC201
Inductive sensors
31You can find wiring diagrams and scale drawings from page 38
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M30 / L = 70 15 f high-grade st. steel 10...36 IP68 100 100 11 IIC210
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 15 · Connector groups 5, 6
M30 / L = 70 15 f brass 10...30 IP68 100 100 11 IIC208
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M30 / L = 70 22 nf high-grade st. steel 10...36 IP68 100 100 56 IIC211
f = flush / nf = non flush
Full metal sensors for oils and coolants
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group 19
M8 / L = 60 2 f high-grade st. steel 10...36 IP67 / IP68 100 100 62 IEC200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 70 5 f high-grade st. steel 10...36 IP67 / IP68 100 100 58 IGC248
f = flush / nf = non flush
Full metal sensors for oils and coolants with correction factor K = 0
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 70 4.5 f stainless steel 10...36 IP68 100 100 53 IGC249
f = flush / nf = non flush
Inductive sensors
32Product selectors and further information can be found at: www.ifm.com
Sensors for oils and coolants with correction factor K = 1
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 65 12 nf high-grade st. steel 10...30 IP68 > 2000 200 63 IGC233
f = flush / nf = non flush
Sensors for oils and coolants with ceramic sensing face
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 13 · Connector groups 5,6, 7
M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210
M18 / L = 70 8 f brass 10...30 IP68 400 100 7 IGC210
f = flush / nf = non flush
Full metal sensors with non-stick coating against weld spatter
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 64 IFR200
M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 58 IGR200
M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 59 IIR200
f = flush / nf = non flush
Inductive sensors
33You can find wiring diagrams and scale drawings from page 38
Electromagnetic field immune sensors with correction factor K = 1
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M12 / L = 65 3 f brass 10...30 IP67 4000 200 65 IFW200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
M18 / L = 65 5 f brass 10...30 IP67 2000 200 66 IGW200
M18 / L = 65 12 nf brass 10...30 IP67 2000 200 63 IGW201
M30 / L = 65 10 f brass 10...30 IP67 1000 200 67 IIW200
M30 / L = 65 22 nf brass 10...30 IP67 1000 200 68 IIW201
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 46 IM5119
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 5
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 46 IM5126
f = flush / nf = non flush
Electromagnetic field immune sensors
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M18 / L = 60 5 f brass 10...36 IP67 700 250 69 IG5647
f = flush / nf = non flush
Inductive sensors
34Product selectors and further information can be found at: www.ifm.com
Sensors for mobile applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M18 / L = 81 8 f stainless steel 10...36 IP67 / IP69K 200 100 70 IGM202
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1
M18 / L = 70 8 f stainless steel 10...36 IP67 / IP69K 200 100 53 IGM200
f = flush / nf = non flush
Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e
Type Length
[mm]
Enablezone
[mm]
Housingmaterial
UbDC
[V]
Protection Response timeon removal /
approach[ms]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 21 · Connector group 19
– 10...15 – – – < 1 / < 1 71 GM701S
Safety relays with relay outputs for fail-safe sensors
Type Description Orderno.
Safety relay · Terminal block Phoenix Contact MSTBO · For the connection of electronic and mechanical fail-safe sensors/switchesand for use as two-hand control · Housing materials: PA
G1501S
Sensors with ATEX approval 1D / 2G
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 10
M18 / L = 33 5 f brass 8.2 DC 7.5...30 145 45 720 72 NG5002
f = flush / nf = non flush
Inductive sensors
35You can find wiring diagrams and scale drawings from page 38
Sensors with ATEX approval 1D / 1G / 2G
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
M12 connector · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 11 · Connector group 20
M18 / L = 51 12 nf brass 8.2 DC 7.5...30 200 85 300 6 NG500A
M12 connector · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 12
40 x 40 x 66 35 nf PPE 8.2 DC 7.5...30 220 710 100 51 NM501A
f = flush / nf = non flush
Sensors with ATEX approval 3D
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 3
M18 / L = 80 8 nf brass 10...55 IP67 300 250 27 IG500A
f = flush / nf = non flush
Accessories for sensors with smooth sleeve
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Accessories for threaded M8 housings
Type Description Orderno.
Mounting sleeve · M12 x 1 - Ø 8 mm · 32 mm · with end stop · for type M8 · Housing materials: brass special coating E10848
Inductive sensors
36Product selectors and further information can be found at: www.ifm.com
Accessories for threaded M12 housings
Type Description Orderno.
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Mounting sleeve · M16 x 1 - Ø 12 mm · 34 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10806
Accessories for threaded M18 housings
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048
Mounting sleeve · M24 x 1.5 - Ø 18 mm · 36 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10807
Mounting sleeve · M22 x 1 - Ø 18 mm · with end stop · for type M18 · Housing materials: brass white bronze coated E11115
Accessories for threaded M30 housings
Type Description Orderno.
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
System components
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Inductive sensors
37You can find wiring diagrams and scale drawings from page 38
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
L+
L
1
4
3
2
L+
L
1
2
3
3
BN
BK
BU
L+
L
4
/L+
L
13
/2 4
5
4
L
L+1
2
32:4:
6
BN
BU
L+L1
LN
7
/1 3
/2 4
L1L+
LN
8
1
3
2
L1L+
LN
9
3
2
L1
N
L+
L
10
+BN
BU
11
L+
L2
1
1
12
L+
L2
1
1
52
13
L+
L
1
4
L+
L
1
4
3
14
L+
L
1
4NPN
L+
L
1
4
3PNP
15
L+
L1
4L+
L
1
4
16
WH
BK
L+
L L
BK
WH
L+
Inductive sensors
38Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
17
L+
L
BN
BK
BU
L+
L
BN
BK
18
L+
L
/1 3
/2 4
L+
L/1 3
/2 4
19
2
4
3
1
5
L+
L
2
4
3
1
5
L+
L
20
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
DC PNP
L+
L
2
4
3
1
5
DC PNP
L+
L
21
(BK)
3
1
4
2
L+
L
(BN)
A2
A1
(BU)
(WH)+24 V
IN1
GND
IN2
1
Scale drawings / drawing no. – CAD download: www.ifm.com
1
453432
M12
x1
174
M12
x1
LED 4 x 90°
2
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
3
LED 4 x 90°
5970
50
M12
x1
174
M12
x1
4
45
M12
x1
174
5
M12
x1
5970
LED 4 x 90°
5
M18
x1
M12
x1
3033
4635
424LED 4 x 90°
6
M18
x1
M12
x1
2538
5140
424
10
LED 4 x 90°
Inductive sensors
39
Scale drawings / drawing no. – CAD download: www.ifm.com
7
M18
x1
M12
x1
49
56,5
70
59
424LED 4 x 90°
8
M18
x1
M12
x1
4956
7059
424LED 4 x 90°
9
39
33
M30
x1,5
37
50
M12
x1
LED 4 x 90° 5 36
10
39
19
M30
x1,5
37
50
M12
x1
LED 4 x 90° 5
15
36
11
59
53
M30
x1,5
57
70
M12
x1
LED 4 x 90° 536
12
8LED
20
2530
M5
x0,
5
2,7
13
16
LED
1823
M5
x0,
5
2,7
8
14
2735
M8
x1
LED 4
13
15
27
M8
x1
4LED
13
25
16
3942
50
LEDM
8x1
413
17
35
LED
M8
x1
413
2
18
38,542,5
M8
x1
4
13
M8
x1
LED 4 x 90°
50
19
4
13
28,5
40
M8
x1
LED 4 x 90°
M8
x1
32,5
Inductive sensors
40Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
20
2734
M8
x1
LED 4
13
M12
x153
21M
8x1
4
13
M12
x1
6250
40
LED 4 x 90°
22
4
3524
M12
x1
4LED
17
9
18
23
9
18 716046
M12
x1
LED 174
4
24
9
18 7160
50
M12
x1
LED 174
25
83
6047
M12
x1
LED 174
4
M12
x1
74
26
3827
M18
x1
4LED 24
9
18
27
24LED
80186950
M18
x1
4
9
8
28
24LED
801869
58
M18
x1
4
9
29
79
24
50
M18
x1
4
110
20
30
81LED
30
8167
5
1544
36
M30
x1,5
9
18
LED
31
4531
5
M30
x1,5
36LED
9
18
32
36
8167
59
5
M30
x1,5
9
18
LED
Inductive sensors
41
Scale drawings / drawing no. – CAD download: www.ifm.com
33
36
685350
5LED
M30
x1,5
M12
x1
78
34
15
36
6853
35
5LED
M30
x1,5
M12
x1
78
35
LED
3,5 27 6,5
36
62
9263
30
LED
20
37
9
18
LED
34
8272
60
38
9870LED
34
38
60
39
20 10
5
M3
8
LED
40
520
IL 5003
4
IL 50021
1: sensing face
40
LED20 10
5
M3
8
40
520
M8
x1
LED
52
IL 5005IL 50041
1: sensing face
41
10,2
27,8
LED
5,6
165,1
22,2
2,75
3,1
3,5
2,83,1
LED
10,4
42
10,2
27,8
5,6
16
22,2
2,75
3,1
3,5
2,83,1
LED10,4
8
Inductive sensors
42Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
4340
6
12
LED
4
2613
32
3,2 4
5
LED
3,2
18
1610
1
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.
44
4
5
18
M8x1
9
6
LED
1
12
40
3,2 32
4
13
LED26
3,2
1016
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.
45
40
66
40
54
M12
x130
30 2
2
1
46
46
5,5
5,5
29,5
1: LED yellow, 2: LED green
46
40
66
40
54
M12
x130
30 2
5,5
5,5
1
2
46
46
29,5
1: LED yellow, 2: LED green
47
40
10,4
45,6
LED
32
5,3
30
61,5
77
5,1
121101
LED
27
48
90
30
45
7,545
9,35,5
60
16
LEDpot.
4012
8
16
49
92
80
40
7,565
65
5,59,3
M12
x1
112
40
LED171
20
1: mounting on DIN rail
Inductive sensors
43
Scale drawings / drawing no. – CAD download: www.ifm.com
50
105
80
40
7,565
65
5,59,3 40
12
27
18
LED
pot.
16
51
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4 6
16
33
52
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
53
M18
x1
M12
x1
5057
7059
424LED 4 x 90°
54
M18
x1
M12
x1
3956
70
LED 4 x 90°
59
10
424
55
6244,5
24
LED4 x 90°
38
M18
x1
424
10
56
LED 4 x 90°
59
38
M30
x1,5
5
57
70
36
M12
x1
15
57
38
M30
x1,5
57
70
LED4 x 90°
536
15
59
1/2"
-20U
NF
-2A
58
5957
50
M18
x1
4
M12
x1
70
24LED 4 x 90°
59
58
50
M30
x1,5
5
57
70
36
M12
x1
LED 4 x 90°
60
67
24
5550
M18
x1
4LED
M12
x1
76
Inductive sensors
44Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
61
36
8266
59
5LED
M30
x1,5
M12
x1
92
62
M8
x1
4
13
M12
x1
6049
33
LED 4 x 90°
63
10
M18
x1
4LED 4 x 90° 24
M12
x1
35
5465
52
64
4940
M12
x1
174
M12
x1
LED 4 x 90°
60
65
54
52
M12
x1
4
M12
x1
LED 4 x 90°
65
17
66
M18
x1
4LED 4 x 90° 24
M12
x1
5254
65
45
67
53
49
M30
x1,5
5
52
65
M12
x1
LED 4 x 90° 36
68
53
34
M30
x1,5
5
52
65
M12
x1
LED 4 x 90°
15
36
69
M18
x1
M12
x1
4047
60
LED 4 x 90°4
24
49
70
64
LED 4 x 90° 24
81
5750
M18
x1
4
71
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4
6
8,5
33
Inductive sensors
45
Scale drawings / drawing no. – CAD download: www.ifm.com
72
33
M18
x1
4
2
24
Inductive sensors
46Product selectors and further information can be found at: www.ifm.com
Inductive sensors
47
High operational reliability due to increased noise immunity.
Sensing range adjustable by means of a potentiometer or pushbutton.
Plastic or metal housing for different applications.
Variable: connector, connection cable or connection terminals.
Assortment of tank and sight glassmounting acccessories.
Capacitive sensors
Capacitive sensors are used for the non-contact detection of any objects. In contrastto inductive sensors, which only detect metallic objects, capacitive sensors can alsodetect non-metallic materials. Typical applications are in the wood, paper, glass,plastic, food and chemical industries. In a packaging system, capacitive sensorsmonitor that the contents of a cardboard box is complete, for example, or checkthe presence of non-metallic caps. Another application is to monitor the conveyingof sheets of glass on a roller conveyor.
Operating principle
The capacitance between the active electrode of the sensor and the electrical earthpotential is evaluated. An approaching object influences the electrical alternatingfield between these two “capacitor plates” and, consequently, the capacitance. Thisapplies to metallic and non-metallic objects. By means of the potentiometer or thepushbutton the user can set the sensitivity.
Increased noise immunity
When detecting objects, very small changes in capacitance must be evaluated andconverted into switching signals. This makes high requirements for the electronics.The sensors must be designed so that they are insensitive to fluctuations of theparasitic basic capacitances, as these can amount to a multiple of the change incapacitance to be measured. Moreover, the sensors must be insensitive to electro-magnetic interference which typically occurs in the application area.
ifm electronic has developed future-oriented solutions to meet the high sensorrequirements. A patented circuit concept efficiently prevents the mentionedproblems and ensures reliable functioning for all relevant noise parameters.
Not only metal: Capacitive sensorsdetect almost allmaterials, herefor example a login a saw mill.
Capacitive sensors
48
System overview Page
Sensors for industrial applications, DC 50
Sensors for industrial applications, AC and AC/DC 51
Sensors for the detection of granulates for the plastics industry, DC 51
Sensors with ATEX approval 51
Accessories mounting components 52
Accessories mounting sets 52
Wiring diagrams 52 - 53
Scale drawings / drawing no. – CAD download: www.ifm.com 53 - 54
Capacitive sensors
49
Sensors for industrial applications, DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M18 / L = 84 8 nf PBT 10...36 IP67 50 250 1 KG5043
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6
M12 / L = 60 4 f high-grade st. steel 10...36 IP65 50 100 2 KF5001
M12 connector · Output function · DC PNP · Wiring diagram no. 3 · Connector groups 5, 6, 7
M18 / L = 93.8 8 nf PBT 10...36 IP67 50 250 3 KG5057
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M30 / L = 81 15 nf PBT 10...36 IP65 40 250 4 KI5002
connector (DIN EN 175301-803) · Output function · DC PNP · Wiring diagram no. 4
M30 / L = 92 15 nf PBT 10...36 IP65 40 250 5 KI5038
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 6 KI5087
Terminals · Output function · DC PNP · Wiring diagram no. 5
M30 / L = 125 15 nf PBT 10...55 IP65 40 250 7 KI5023
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
Ø 34 / L = 81 20 nf PBT 10...36 IP65 40 250 8 KB5004
f = flush / nf = non flush
Capacitive sensors
50Product selectors and further information can be found at: www.ifm.com
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · AC/DC · Wiring diagram no. 6
M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 4 KI0016*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for the detection of granulates for the plastics industry, DC
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 8 · Connector groups 5, 6, 7
M18 / L = 87 12 nf PBT 10...36 IP65 / IP67 10 200 9 KG5065
f = flush / nf = non flush
Sensors with ATEX approval
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Terminals · Output function · DC PNP · Wiring diagram no. 5
M30 / L = 151 15 nf PBT 10...30 DC – – – 10 10 KI5065
Terminals · Output function · AC/DC · Wiring diagram no. 7
M30 / L = 151 15 nf PBT20...250AC/DC
– – – 25 / 50 10 KI0042*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting), Place the fuse outside the hazardous area. . Recommendation: checkthe unit for reliable function after a short circuit.
Capacitive sensors
51You can find wiring diagrams and scale drawings from page 52
Accessories mounting components
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Accessories mounting sets
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Core colours
BN brown
BU blue
BK black
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L+
L
1
3
2
5
/L+
L
13
/2 4
6
BN
BU
L+L1
LN
7
/1 3
/2 4
L1L+
LN
Capacitive sensors
52Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
8
L+
L
1
4
3
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
24
58
4
84
M18
x1
pot.LED LEDpot.
2
40,2
38,2
M12
x1
M12
x1
59,8
1 2
1: LED 4 x 90°, 2: with pot.
3
1
24
58
4
84
M18
x1
93,8
67,2
M12
x1
2
1: with pot., 2: LED
4
36
8159
5
M30
x1,5
9
18pot.LED
5
LED36
66
5
59
M30
x1,5
92
pot.
82
6
60
M30
x1,5
7790
LED (4 x 90°) 5
M12
x 1
361
15
1: Programming buttons
7
36
6454
5
M30
x1,5
95125
37
25
88
LED pot.
8
9
18
34
8160 LED pot.
9
24
7756
M18
x1
4
M12
x1
87
1 2
1: LED ring, 2: Programming buttons
Capacitive sensors
53
Scale drawings / drawing no. – CAD download: www.ifm.com
10
36
6454
5
M30
x1,5
95125
37
88
LED POTI
26
151
63
24
Capacitive sensors
54Product selectors and further information can be found at: www.ifm.com
Capacitive sensors
55
Detection also through non-magnetisable metals.
Small designs with very long sensing ranges up to 100 mm.
Cylinder and rectangular designs for demanding applications.
Wide temperature range for universal use.
Flush or non-flush installation innon-magnetisable metals.
Magnetic sensors
Magnetic sensors are used for the detection of positions without contact or wearand tear in control technology. They are used where inductive sensors reach theirlimits. The advantage: Compared to inductive sensors magnetic sensors have aconsiderably higher sensing range and smaller housings.
Since magnetic fields penetrate all non-magnetisable materials, the sensors candetect magnets through walls made of non-ferrous metal, stainless steel,aluminium, plastic or wood.
In gate systems, for example, the magnet sensor only detects the magnet which isto be detected. Any possible influences by aluminium in the environment do notimpact the sensor.
In the food industry the magnetic sensor is often used in connection with pigs(cleaning devices which pass through the inside of pipes). By means of magneticsensors their exact position can be detected from the outside through the wall ofthe stainless steel pipe.
Operating principle
Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant MagnetoResistive Effect) technology. The measuring cell consists of resistors with severalextremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventionalWheatstone bridge circuit two screened and two unscreened GMR resistors arecombined, a large signal proportional to the magnetic field is produced if a mag-netic field is present. As from a defined threshold value an output signal is switchedvia a comparator.
Installation
Magnetic sensors can be mounted flush with all materials (even metals) withoutreduction in the sensing range. Depending on the orientation of the magnetic fieldthe sensor can be damped from the front or from the side.
The sensor switchesas soon as themagnet has reachedthe switch-on point.The direction ofmovement of themagnet is notimportant.
Magnetic sensors
56
System overview Page
Sensors for industrial applications 58
Accessories mounting components 58
Accessories mounting sets 58
Accessories damping magnets 58
Wiring diagrams 59
Scale drawings / drawing no. – CAD download: www.ifm.com 59
Magnetic sensors
57
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M12 / L = 50 60 high-grade st. steel 10...30 IP67 5000 200 1 MFS201
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6
M12 / L = 60 60 high-grade st. steel 10...30 IP67 5000 200 2 MFS200
M18 / L = 60 70 stainless steel 10...30 IP67 5000 200 3 MGS200
Accessories mounting components
Type Description Orderno.
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048
Accessories mounting sets
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Accessories damping magnets
Type Description Orderno.
Damping magnet · M 5.1 · Housing materials: Barium ferrite with plastic coating ABS E10754
Magnetic sensors
58Product selectors and further information can be found at: www.ifm.com
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
5029
M12
x1
4LED
17
2
4940
M12
x1
174
M12
x1
LED 4 x 90°
60
3
M18
x1
M12
x1
4047
60
LED 4 x 90°4
24
49
Magnetic sensors
59
Self-clamping fixture for easy adjustment and quick mounting.
Convenient: can be easily inserted into the slot from the top.
Suitable for almost all C and T slots.
Unit versions available with connection cable and M8 / M12 cable plug.
Wide selection of adapter accessories.
Cylinder sensors
Cylinder sensors are used for position detection of pistons in pneumatic cylinders.They are directly mounted onto the cylinder. The ring magnet attached to thepiston is sensed through the housing wall of non-magnetisable material(e.g. aluminium, brass or stainless steel). ifm electronic offers a standard solution fordifferent cylinder types and manufacturers.
Operating principle
ifm electronic‘s cylinder sensors use state-of-the-art GMR and AMR technology: AGMR element is made up of extremely thin magnetic layers, each separated by anonmagnetic layer. Without external field they align in an antiparallel manner whichresults in a defined electrical resistance. If these layers are exposed to a magneticfield, the magnetic layers align in a parallel manner. This results in a large change inresistance that is converted into a switching signal by the internal electronics.
An AMR element consists of thin ferromagnetic stripes. Electrical resistance ishighest without external magnetic fields. The effect of a magnetic field reducesresistance. This change is converted into a switching signal by the internalelectronics. Advantage: This method enables exact measurement of even very smallchanges of the magnetic field where space is extremely limited. This results in asmaller hysteresis and a short travel distance. So, the sensors can be used whereverexact positioning is required (e.g. short-stroke cylinder).
Response sensitivity
The response sensitivity applies equally to either magnetic polarity and withoutexternal field influence. The magnetic flux density in most pneumatic cylinders isbetween 5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set sothat they detect these magnetic fields safely.
Travel distance
The travel distance describes the section which is covered by the magnet in thesensing zone. It depends on the strength of the magnet. The short response timesof the sensors allow very high travel speeds.
Position sensing:Cylinder sensorsmonitor the positionof the piston in apneumatic cylinder.
Cylinder sensors
60
System overview Page
T-slot sensors for industrial applications 62
T-slot sensors for hygienic and wet ares 62
T-slot sensors for short-stroke cylinders 63
Non flush C-slot sensors for industrial applications 63
Flush C-slot sensors for industrial applications 63
Fixing straps for clean line cylinders 63
Adapters for tie rod and integrated profile 63
Various adapters and memorisation blocks 64
Wiring diagrams 64
Scale drawings / drawing no. – CAD download: www.ifm.com 64
Cylinder sensors
61
T-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5100
Cable 2 m · Output function · 3-wire · DC NPN · Wiring diagram no. 2
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5114
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3
25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP67 100 -25...85 1 MK5103
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 200 -25...85 1 MK5117
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 4 · Connector group 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 2 MK5101
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 4 · Connector groups 5, 6
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 200 -25...85 3 MK5108
T-slot sensors for hygienic and wet ares
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 4 · Connector groups 5, 6
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 / IP69K 100 -25...85 4 MK5111
Cylinder sensors
62Product selectors and further information can be found at: www.ifm.com
T-slot sensors for short-stroke cylinders
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 6000 IP67 100 -25...85 5 MK5140
Non flush C-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 6 MK5300
Flush C-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 4 · Connector groups 5, 6
25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 7 MK5314
Fixing straps for clean line cylinders
Type Description Orderno.
Fixing strap for clean-line cylinders · Piston diameter · Ø 25...32 mm · Piston diameter 25...32 mm · for type MKT · Housingmaterials: adapter: PA / Fixing strap: stainless steel
E11818
Adapters for tie rod and integrated profile
Type Description Orderno.
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housingmaterials: aluminium / screw: stainless steel
E11797
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...15 mm · Housingmaterials: aluminium / screw: stainless steel
E11799
Cylinder sensors
63You can find wiring diagrams and scale drawings from page 64
Various adapters and memorisation blocks
Type Description Orderno.
Adapter for SMC cylinder CP95 · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11872
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L
BN
BK
BU
L+
3
L
BN
BU
L+
4
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
2
L
M8
x1
37
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
3
L
5
2
6,2
5,7
25,3
5,1
6,5
LED
M12
x1
55
1: Fastening clamp, 2: sensing face
4
L
5
2
6,2
5,7
25,3
5,1
6,5
LED
M12
x1
55
1: Fastening clamp, 2: sensing face
Cylinder sensors
64Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
5
5
12
5,7
25,3
5,1
6,5
LED
2
1: Fastening clamp, 2: sensing face
6
17,5
7,7
2,84,8
1
4,2LED
2
1: Fastening clamp, 2: sensing face
7
LM
12x1
LED
2,84,8
1
25,8
5
6,5
2
40
1: Fastening clamp, 2: sensing face
Cylinder sensors
65
Dual inductive feedback sensors forvalves and actuators.
Straightforward fit to standard actuatorsbased on VDI / VDE 3845.
AS-i dual sensor for quick and safe installation due to “plug & play”.
Compact, weatherproof andlow maintenance.
Also available as complete set includingall the accessories for a valve.
Valve sensors
In industrial processes where liquids, air or gases are used valves are needed fordosing and control. There is a wide variety of valve types; butterfly or ball valvesbeing the most common quarter-turn types.
These valves are seldom operated manually. Pneumatic valve actuators are normallyused for mechanical positioning. The valve position must be monitored electronical-ly. On the one hand to provide a feedback to the controller when a certain position(e.g. “open” or “closed”) is reached. On the other hand it is necessary to monitorthe valves centrally.
Mechanical switches are still often used for position feedback on the actuator shaft.For other solutions several inductive sensors are used together with a switch targetfor position detection. Disadvantage: Mounting is mechanically complex. Wherethere are temperature fluctuations condensing humidity leads to corrosion and thusmalfunction.
Operating principle
An innovative design eliminates the disadvantages of these conventional solutions.In 1992 ifm electronic developed a standard which is now used by many leadingactuator manufacturers. A round switch target, known as a “puck”, with two metalscrews offset by 90° is mounted on the actuator shaft. The screws are located at adifferent height. A compact dual inductive sensor (type IND) with two integral sen-sors detects the upper or lower metal screw depending on the valve position andthus the two switch positions.
Advantages
Due to the simple construction the system operates safely with no wear at all. It isvirtually resistant to external influence and meets the protection rating IP 67. Undercertain conditions the unit can even be self-cleaning. Compared to conventionalsolutions the sensor weight is low. The sensors are also resistant to mechanicalstress such as vibration and shock.
Feedback: Monitoringof pneumatic and
manual valves mustbe possible.
Valve sensors
66
System overview Page
Sensors for industrial applications 68
Sensors with ATEX approval 1G/2G and 1D 68
Switching cams for sensors with quarter-turn actuators 68
Wiring diagrams 69
Scale drawings / drawing no. – CAD download: www.ifm.com 69
Valve sensors
67
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · AC/DC · Wiring diagram no. 1
40 x 26 x 40 4 nf PBT 20...250 IP67 25 / 50 350 / 100 1 IN0110*
M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 4 · Connector groups 5, 6
40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 2 IN5224
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 2 IN5225
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors with ATEX approval 1G/2G and 1D
Type Dimensions
[mm]
Sensingrange
[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 3
40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 3 NN5009
f = flush / nf = non flush
Switching cams for sensors with quarter-turn actuators
Type Description Orderno.
Target puck · Ø 53 mm · 6 possible switching flag positions · with drain holes · Housing materials: Target puck: PA 6 / screws: high-grade stainless steel
E17105
Target puck · Ø 65 mm · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A
E17324
Valve sensors
68Product selectors and further information can be found at: www.ifm.com
Core colours
BK black
BN brown
BU blue
WH white
Wiring diagrams
1
BN
BU
L+L1
LN
WHL+L1
BK
LNBU:
BK: A1A2
2
L
L+
3 BU
2 WH
4 BK
1 BN
2:4: A1
A2
3
Out 1BK
BU
WH
BNL+ 1
L+ 2
Out 21
4
L
L+
L+
L
2:1: A1
A2
2 WH
1 BN
4 BK
3 BUL
L+
L+
L
3:4: A1
A2
2 WH
1 BN
4 BK
3 BU
NPNPNP
Scale drawings / drawing no. – CAD download: www.ifm.com
1
40
2613
9
LED
A1
A2 6,5
LED
8,54 40
4,5
5,5
30
2
40
2613
M12
x1
8,526
4,5
5,5
30
40
9
LED
A1
A2 6,5
LED
3
40
2613
9
LED
A1
A2 6,5
LED
8,54 26
4,5
5,5
30
Valve sensors
69
Photoelectric sensors
70
Photoelectric sensors
71
Infrared / red lightsensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
72 - 7374 - 79
7979 - 82
Laser sensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
84 - 8586 - 87
8787
Distance detection
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
88 - 89909090
Fibre optics
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
92 - 9394 - 95
9595 - 96
For specific systems
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
98 - 99100
100 - 101101
Visible red light for easy adjustment.
Versions for use in hygienic and wet areas.
LED display to check operation,switching status and function.
Quick set-up due to easy teaching.
Extensive range of system componentsfor easy and safe mounting.
Photoelectric sensors
Automation technology can no longer be imagined without photoelectric sensors as“artificial eyes”. They are used where safe and non-contact detection of the exactposition of objects is required. The material of the objects to be detected is of noimportance. Compared to inductive sensors photoelectric sensors have a muchhigher sensing zone.
Through-beam sensors
A through-beam sensor is distinguished by a long range. The system consists of twoseparate components: a transmitter and a receiver. The light only travels one way(from the transmitter to the receiver). Adverse effects in the applications, such asdust in the air, dirt on the lenses, steam or mist do not immediately interfere withthe system (high excess gain).
Retro-reflective sensors
For a retro-reflective sensor the transmitter and receiver are incorporated into onehousing. By means of a reflector the transmitted light is returned to the receiver.
Diffuse reflection sensors
A diffuse reflection sensor is used for the direct detection of objects. Transmitterand receiver are incorporated into one housing. The transmitter emits light whichis reflected by the object to be detected and seen by the receiver. This systemevaluates the reflected light of an object.
Therefore additional components (e.g. reflectors for retro-reflective sensors) are notnecessary to operate a diffuse reflection sensor.
Fixing options
ifm electronic offers a complete component system of easy-to-use mounting setsthat make installation easier for you. The solutions consist of a clamp which isfastened with only one screw, keeps the sensors safely in place and at the sametime guarantees free movement in all axes.
The reflector reflectsthe light beam: For aretro-reflective sensortransmitter and re-ceiver are integratedinto one housing.
Artificial eyes: Photo-electric sensors are
used to detect posi-tions in automation
technology.
Photoelectric sensors
72
System overview Page
Cylindrical OF housing (M12) BasicLine 74
Cylindrical housing OG (M18) BasicLine 74 - 75
Cylindrical housing OG (M18) PerformanceLine 75
Rectangular OH housing BasicLine 76
Rectangular housing OJ PerformanceLine, lateral sensing face 76
Rectangular housing OJ PerformanceLine, front sensing face 76
Rectangular housing O5 BasicLine 76 - 77
Rectangular housing O5 PerformanceLine 77
Rectangular OL housing BasicLine 77 - 78
Prismatic reflectors, reflective tape and fixing components 78
Accessories OG housing 79
Wiring diagrams 79
Scale drawings / drawing no. – CAD download: www.ifm.com 79
Infrared / red lightsensors
73
Cylindrical OF housing (M12) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 5, 6
Diffuse reflection sensor 1...200 mm infrared 92 H/D PNP 9 1 OF5012
Cylindrical housing OG (M18) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 5, 6
Transmitter 8 m red 600 – 1 2 OGS100
Through-beam sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 5, 6, 7
Receiver 8 m red – D PNP 2 2 OGE100
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6
Transmitter 20 m red 800 – 1 3 OGS200
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6, 7
Receiver 20 m red – D PNP 2 3 OGE200
Retro-reflective sensor · M12 connector · 10...30 DC · plastics · IP67 · Connector groups 5, 6, 7
Polarisation filter 0.05...2.5 m red 200 D PNP 2 2 OGP100
Polarisation filter 0.05...2.5 m red 200 H PNP 3 2 OGP101
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6, 7
Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP200
Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP201
Photoelectric sensors
74Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...30 DC · plastics · IP65 · Connector groups 5, 6, 7
Diffuse reflection sensor 10...400 mm red 25 H PNP 2 4 OGT100
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 · Connector groups 5, 6, 7
Diffuse reflection sensor 2...600 mm red 50 H PNP 2 5 OGT200
Background suppression 15...250 mm red 15 H PNP 2 5 OGH200
Cylindrical housing OG (M18) PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6
Transmitter 25 m red 1000 – 1 6 OGS500
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6, 7
Receiver 25 m red – H/D PNP 2 7 OGE500
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6, 7
Polarisation filter 0.03...5 m red 200 H/D PNP 2 7 OGP500
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 5, 6, 7
Diffuse reflection sensor 2...800 mm red 66 H/D PNP 2 7 OGT500
Background suppression 15...300 mm red 25 H/D PNP 2 7 OGH500
Infrared / red lightsensors
75You can find wiring diagrams and scale drawings from page 79
Rectangular OH housing BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · Cable 2 m · 10...30 DC · plastics · IP67
Background suppression 1...15 mm red 2.5 H PNP 4 8 OH5008
Rectangular housing OJ PerformanceLine, lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3
Polarisation filter 0...2 m red 64 H/D PNP 5 9 OJ5026
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3
Background suppression 15...400 mm red < 18 H/D PNP 5 10 OJ5048
Background suppression 15...400 mm red < 18 H/D PNP 5 11 OJ5148
Rectangular housing OJ PerformanceLine, front sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3
Background suppression 15...400 mm red < 18 H/D PNP 5 12 OJ5044
Rectangular housing O5 BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 5, 6
Transmitter 20 m red 500 – 1 13 O5S200
Photoelectric sensors
76Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 5, 6, 7
Receiver 20 m red – D PNP 6 13 O5E200
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 5, 6, 7
Polarisation filter 0.1...7 m red 175 D PNP 6 14 O5P200
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP65 · Connector groups 5, 6, 7
Background suppression 50...1400 mm red 50 H PNP 3 15 O5H200
Rectangular housing O5 PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 5, 6, 7
Polarisation filter 0.075...10 m red 250 H/D PNP 2 16 O5P500
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 5, 6, 7
Background suppression 50...1800 mm red 50 H/D PNP 2 16 O5H500
Rectangular OL housing BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67
Transmitter 25 m infrared < 2500 – 7 17 OL0006
Receiver 25 m infrared – H/D relay 8 17 OL0007
Infrared / red lightsensors
77You can find wiring diagrams and scale drawings from page 79
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67
Polarisation filter 0.3...5 m red 250 H/D relay 8 18 OL0004
Diffuse reflection sensor · Terminals · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67
Diffuse reflection sensor 1...1000 mm infrared < 300 H/D relay 8 17 OL0005
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Prismatic reflectors, reflective tape and fixing components
Type Description Orderno.
Prismatic reflector · Ø 42 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20004
Prismatic reflector · Ø 50 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials:plastics
E20956
Prismatic reflector · Ø 80 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20005
Prismatic reflector · 45 x 28 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20452
Prismatic reflector · 93 x 45 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20453
Prismatic reflector · 95 x 95 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20454
Reflective tape · TS-02 · 50 x 1000 mm · for red light and infrared light retro-reflective sensors · Housing materials: plastics E21015
Photoelectric sensors
78Product selectors and further information can be found at: www.ifm.com
Accessories OG housing
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
1
3
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L
BN
BK
BU
L+
5
L+
2
4
1
3 L2: Teach
6
L+
L
1
4
3
7
L1L+
L
1
N2
8
L+
L
L1
N2
3
1
4
9
L
L+
3
2
4
1
L
L+
1
2
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M12
x1
745554
M12
x1
3 LED 17
4
85
pot.
17
2
M18
x1
M12
x1
3444
LED
4
24
31
27,5
Infrared / red lightsensors
79
Scale drawings / drawing no. – CAD download: www.ifm.com
3
M18
x1
M12
x1
4047
6049
LED 4 x 90°
4
24
4
M18
x1
M12
x1
3444
21,4
LED
4
24
31
6,5
1
1: with pot.
5
M18
x1
M12
x1
44
59
7261
LED 4 x 90°
50
1
4
24
1: with pot.
6
M18
x1
M12
x1
3459
7261
LED 4 x 90°
4
24
7
M18
x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
8
3,9 9,6
12,5
3,2 15
2,9
7,6
7,2
20,6
25,15
LED
9
45
11
LED
8,2
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
10
11
LED45
9,5
19,5
1
9
LED
4
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
1: pushbutton
Photoelectric sensors
80Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
11
24LED
35
8,5
1,8 5,
3 19
3,5
5
1
9
LED
4
11,6
1
19,5
M8x1
36,5
11
LED
43,5
1
9,5
1: pushbutton
12
45
11
LED
1
24
9,5
19,5
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
LED
44
1
1: pushbutton
13
LED
15,4
18,2
M12 x1
17
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
14
18,2
M12 x1
1736
,5
LED
15,4
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
15
1
38
10
1
LED
24,3
15,4
18,2
M12 x1
19,5
37
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
62
1: with pot., 2: When a M5 mounting screw is used, the max. tighte-ning torque is 2 Nm.
16
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
Infrared / red lightsensors
81
Scale drawings / drawing no. – CAD download: www.ifm.com
17
27
LED10
3175
LED
1
6
62
50
49
5,5
6
LED
8,6
1
1: pushbutton
18
6
62
50
49
5,5
6
8,6
LED
1
27
LED
1018
13 75
LED
1
1: pushbutton
Photoelectric sensors
82Product selectors and further information can be found at: www.ifm.com
Infrared / red lightsensors
83
Detection of minute objects.
Clearly visible red light for easy settingto the object.
Automatic switch point setting bypressing a pushbutton.
Application sensors available for specialapplication areas.
System components available forfine adjustment.
Laser sensors
Laser sensors are used where detection of small objects or precise positioning isrequired. They are available as through-beam sensors, retro-reflective sensors ordiffuse reflection sensors.
Laser light consists of light waves of identical length which have a defined phaserelation (coherence). This results in an important feature of laser systems, that is thealmost parallel light beam. Result: Due to the small angle of divergence long rangesof up to 60 metres can be achieved. The laser spot which is also clearly visible atdaylight simplifies the alignment of the system. Apart from the advantages somepoints have to be taken into account for the selection of the suitable optical system:Compared to standard sensors the laser sensors have a reduced temperature range(-10...60 °C). Life is limited to approx. 50,000 hours. Basically laser systems aremore expensive than normal red light sensors. In view of the small light spot andthe often high ranges the system is more sensitive to vibrations than standardsensors.
Coherent: Lasersensors emit light ofa defined wave lengthand the same phaseposition.
Photoelectric sensors
84
System overview Page
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 86
Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1 86
Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2 86
Prismatic reflector 86 - 87
Wiring diagrams 87
Scale drawings / drawing no. – CAD download: www.ifm.com 87
Laser sensors
85
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 5, 6, 7
Polarisation filter 0.2...15 m red 40 H/D PNP 1 1 OGP700
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 5, 6, 7
Background suppression 20...200 mm red 1.2 H/D PNP 1 1 OGH700
Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3
Polarisation filter 8 m red < 12 H/D PNP 2 2 OJ5136
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 2, 3
Background suppression 7...150 mm red 0.8 H/D PNP 2 3 OJ5058
Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Optical distance sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 5, 6, 7
Background suppression 0.2...10 m 5 6normally open / closed
programmablePNP1 4 O1D101
Prismatic reflector
Type Description Orderno.
Prismatic reflector · 50 x 10 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20988
Photoelectric sensors
86Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Wiring diagrams
1
L+
L
1
4
3
2
L+
2
4
1
3 L2: Teach
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M18
x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
2
1
9
LED
4
11,6
M8x1
1
36,5
11
LED
8,2
43,5
1
24LED
35
8,5
1,8 5,
3 19
3,5
5
1: pushbutton
3
11
LED
45
9,5
15,5
1
243,
23,
1LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
4
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
1: 4-digit alphanumeric display, 2: Programming buttons
Laser sensors
87
Non-contact distance detection at a high range.
Analogue and switching outputs.
Small light spot and exact background suppression.
Compact and robust metal housing.
Unbeatable price / performance ratio.
Optical distance detection using PMD technology
For collision avoidance, completeness check, level monitoring or as diffuse reflectionsensor with an extraordinary range: The efector pmd distance sensors can be usedin a wide range of applications. Depending on the type, the laser sensors preciselydetermine distances up to 10 m or up to 75 m when a reflector is used. The robustmetal housing ensures operational reliability even under rough operatingconditions.
Operating principle
The efector pmd laser sensors operate to the time-of-flight principle.
The pmd sensor’s receiver element is a „System-on-Chip“ design. Both sensorelement and electronics for signal evaluation are integrated on a single silicon chipcalled a Photonic Mixer Device (PMD). Advantage: This innovative ifm design offershigh performance in a compact, industrially compatible housing – at a fraction ofthe price of conventional systems.
The determined distance is indicated on the 4-digit display and provided via thescalable analogue output (4…20 mA). The user can program two switching outputswhich switch when a certain distance is reached. Up to 50 measurements persecond are possible (adjustable). The light spot diameter is 6 mm at a 10 m dis-tance. This makes the sensor suitable for applications requiring exact backgroundsuppression. An outstanding feature of efector pmd is the extremely compact sizeof only 42 x 45 x 52 mm.
The efector pmdprovides an analoguesignal that is propor-tional to the object-to-sensor distance.
Collision avoidanceon an overhead con-
veyor: efector pmdmonitors distancesbetween products.
Photoelectric sensors
88
System overview Page
Rectangular O1 housing for optical distance measurement, laser class 2 90
Wiring diagrams 90
Scale drawings / drawing no. – CAD download: www.ifm.com 90
Distance detection
89
Rectangular O1 housing for optical distance measurement, laser class 2
Type Operating principle Range
[mm]
Samplingrate
[Hz]
Spot Ø atmax.range[mm]
Ub
[V]
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 5, 6
Optical distance sensor 1...75 m 1...33 150 18...30 1 1 O1D106
Optical distance sensor 0.2...10 m 1...33 6 18...30 1 1 O1D105
Optical distance sensor 0.2...10 m 1...50 6 18...30 1 1 O1D100
Wiring diagrams
1
L+
L3
4
2
1
Out 1Out 2
4:2:
4
L
L+1
2
3Out 1Out 2
4:2:
Scale drawings / drawing no. – CAD download: www.ifm.com
1
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
1: 4-digit alphanumeric display, 2: Programming buttons
Photoelectric sensors
90Product selectors and further information can be found at: www.ifm.com
Distance detection
91
Easy connection of different fibre optics.
Manual or automatic setting by meansof “teach in”.
LED display to check operation,switching status and function.
Various fibre materials for differentapplications.
Easy mounting, also on DIN rail possible.
Fibre optics systems
If there is only little mounting space for standard photoelectric sensors, fibre opticscan be used. They are connected via fibre optic amplifiers which contain the controlmonitor and photoelectric components. There are two operating principles:
Through-beam principle
Transmitting and receiving fibre optics are laid separately. The two ends (fibre opticheads) are mounted opposite each other. The light beam interruption is evaluatedaccording to the through-beam principle.
Diffuse reflection principle
Transmitting and receiving fibre optics are in one sheath and one sensing head.Evaluation is based on the diffuse reflection principle.
Classification of the fibre optics
Glass fibre optics
Fibre optics made of silicate glass are more resistant to heat, ageing and chemicalsthan acrylic fibre optics. They do not change their optical response when they arebent. Glass fibre optics cannot be cut to length by the user.
Acrylic fibre optics
Acrylic fibre optics are suited for standard applications if no particular demandssuch as heat or chemical resistance are made. They can be cut to length and are lessexpensive than glass fibre optics.
High-flex fibre optics
If the minimum bending radius is not adhered to, the fibre is damaged. High-flexfibre optics allow extremely small bending radii.
Three versions of fibre optic amplifiers are available
Some versions of the OOF and OBF housings feature special functions: the functioncheck output indicates a problem of the unit before it fails (short circuit on the out-put, internal fault, low excess gain). The pulse stretching function (delay time)allows the user to set a minimum pulse duration on the switching output.
Minute objects up to0.5 mm are detectedsafely.
Fibre optic systemscan also be mounted
in places where accessis difficult.
Photoelectric sensors
92
System overview Page
OBF amplifiers for acrylic fibre optics 94
Acrylic fibre optics for OBF / OOF housings, diffuse reflection system 94
OKF amplifiers for glass fibre optics 94
OUF amplifiers for glass fibre optics 94
Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system 95
Wiring diagrams 95
Scale drawings / drawing no. – CAD download: www.ifm.com 95
Fibre optics
93
OBF amplifiers for acrylic fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OBF · M12 connector · plastics · DC · Wiring diagram no. 2 · Connector groups 5, 6
1 FE/FT-11 red 0...2 m 0...100 mm H/D PNP/NPN 10...30 1 OBF500
Acrylic fibre optics for OBF / OOF housings, diffuse reflection system
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FT-11 PMMA 60 / 70 / 300 aluminium -40...70 PE (polyethylene) 2 E20645
FT-11 PMMA 70 / 100 / 300 aluminium -40...70 PE (polyethylene) 3 E20633
FT-11 PMMA 40 / 60 / 150 stainless steel -40...70 PE (polyethylene) 4 E20715
OKF amplifiers for glass fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OKF · Cable 2 m · plastics · DC · Wiring diagram no. 3
1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 5 OK5001
OUF amplifiers for glass fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OUF · M12 connector · plastics · DC · Wiring diagram no. 1 · Connector groups 5, 6, 7
1 FE/FT-00 infrared 0...0.12 m 0...40 mm H PNP 10...50 6 OU5043
Photoelectric sensors
94Product selectors and further information can be found at: www.ifm.com
Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system
Type System Fibre opticmaterial
RangeOOF / OKF / OUF
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 7 E20495
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
L+
L
1
4
3
2
2
L
L+
4
1
3
4
L
L+
2
1
3
3
L
L+
BU
BK
BN
WH
L
L+
WH
BU
BK
BN
Scale drawings / drawing no. – CAD download: www.ifm.com
1
15
36
LED
2
M12
x1
1
74
6044
3,2
1: mounting on DIN rail, 2: setting pushbuttons
2
26
M4
161
6
3
35
M6
26
Fibre optics
95
Scale drawings / drawing no. – CAD download: www.ifm.com
4
3530
6
3
1
5
305
109
19LED
pot.
12,525
4,3
4,1
506M11x1
6
16
2849
pot.LED
740
51
2143
pot.LED
M12
x1
73
4,3
3,5
5
M11
x1
7
14
16
6
4
3
Photoelectric sensors
96Product selectors and further information can be found at: www.ifm.com
Fibre optics
97
High-quality photoelectric sensors fordifferent applications.
Excellent price / performance ratio.
Easy adjustment via teach buttons or potentiometer.
Wide range of system components for easy and safe mounting.
Detection of transparent objects
Counting bottles and glasses or the reliable monitoring of film for tear can beperformed without problem using specially designed retro-reflective sensors.ifm electronic offers a retro-reflective sensor with a small switching hysteresis, inparticular for the detection of transparent objects. Due to the operating principle,retro-reflective sensors have the advantage that the light beam must pass the objectto be detected twice, weakening the light sufficiently to detect a transparent objectreliably. Precise adjustment is made by means of the teach buttons.
Contrast sensor
The O5 contrast sensor is specially suitable for detecting print marks and particularlyflat objects.
With its RGB transmitter LED the sensor detects even very small differences incontrast. During set-up it automatically selects the optimum transmitter colour fromthe colours red green blue (RGB) to ensure maximum energy difference of thereflected light. In addition, the teach method saves time and money. Pressing theteach buttons twice is enough for the sensor to be ready for operation.
High-resolution colour sensor
The new electronic colour sensor from ifm electronic detects the colour, packaging,label or imprint of objects at a high resolution. With the five selectable tolerancesteps, the colour sensor perfectly differentiates even the finest shades of colourfrom the background or other objects. The unit is set to the colour to be detectedby one push of the button. This saves time and money.
Optical fork and angle sensors
The optical fork and angle sensors are made from distortion-resistant diecast zincand feature a high switching frequency. Applications are in particular part monitor-ing in feeding technology and handling systems. Further application examples arebelt edge and double feed monitoring.
Sensitivity setting using the potentiometer and setting of light-on / dark-on modeusing the rotary switch are simple and time-saving. No complex adjustment isrequired because transmitter and receiver are already aligned towards each other.Due to the fine and precise red light beam which is constant across the entire forkwidth, out-of-balance monitoring of shafts can also be carried out.
Typical application forcontrast sensors:Counting of glassbottles.
The optical fork andangle sensors are
especially used forpart monitoring in
feeding technologyand handling systems.
Photoelectric sensors
98
System overview Page
Contrast sensors 100
Optical fork sensors 100
Prismatic reflector 100
Wiring diagrams 100
Scale drawings / drawing no. – CAD download: www.ifm.com 101
For specific systems
99
Contrast sensors
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
M12 connector · 10...36 DC · plastics · IP67 · Connector groups 6, 8
Diffuse contrast sensor 18...22 mm red 1.5 x 5 H/D PNP/NPN 2 1 O5K500
Optical fork sensors
Type Fork width(w)
[mm]
Fork depth(d)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 3 · Connector group 1
10 17 0.3 10000 H/D PNP/NPN 10...35 2 OPU200
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 1 · Connector group 1
50 55 0.5 4000 H/D PNP 10...35 3 OPU203
Prismatic reflector
Type Description Orderno.
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Wiring diagrams
1
L+
L
1
4
3
2
L+
L
1
4
3
L+
L
1
4
3
Photoelectric sensors
100Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
3
L+
L
1
4
3
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
56
6,446,8
25
70,3
5
1
LED
6
2
1
LED
30,5
24,3
15,4
5x9
625 2
18,2
M12 x1
25,9
38
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
2
6M8x
1
10
4,34,5
4,5
12,5
10
W=
10
4
D = 17
45
25
LED
12
22
10
1: output function switch , 2: potentiometer sensitivity
3
12
2030
10
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
1010
W=
505
D = 55
80
1: potentiometer sensitivity, 2: output function switch
For specific systems
101
Robust designs.
Industrial standard housings.
Cable entry for axial and radial use.
Designs with integrated bus interface.
Hollow shaft encoder for direct mounting on actuators.
Encoders
In many manufacturing and production processes encoders are indispensable asreliable transducers to ensure precise positioning. They convert rotary movementinto digital signals. Encoders use the wear-free photoelectric detection. A pulse discfirmly attached to the shaft ensures this detection.
Incremental encoders
Incremental encoders generate a precisely defined number of pulses per revolution.They are a measure of the angular or linear distance moved.
The coded disc is divided into separate segments which are alternately transparentor opaque. An LED emits a parallel-orientated light beam which illuminates all seg-ments of the coded disc. Photo elements receive the modulated light and convert itinto two sinusoidal signals. Digitalisation electronics amplify the signals and shapethem into square-wave pulse trains which are generated via the line driver in theoutput. The phase difference between signals A and B, which are phase-shifted by90 degrees, allows evaluation of the direction of rotation.
Absolute encoders
Absolute encoders provide an absolute numerical value for each angular position.This code value is available immediately after power is applied. This “absolute”value makes a reference procedure like the one required for the incrementalencoder unnecessary. Absolute encoders are used wherever angular positions haveto be allocated to a certain value and where the detection of the present position isabsolutely necessary in the case of a power failure.
Singleturn and multiturn
Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certainnumber of measuring steps. The measuring values are repeated after one revolu-tion. The maximum resolution is 8192. Multiturn encoders, however, do not onlydetect angular positions but also distinguish between multiple revolutions.
Linear measurementby means of a count-er: Rotary movementis converted intodigital signals.
Hollow shaft encoderfor direct mounting
on the axis.
Encoders
102
System overview Page
Incremental encoders with solid shaft 104
Incremental encoders with hollow shaft 104
Couplings for encoders 104
Connectors for encoders 104
Scale drawings / drawing no. – CAD download: www.ifm.com 105
Encoders
103
Incremental encoders with solid shaft
Type Resolution Ub
[V]
f
[kHz]
Iload
[mA]
Shaft
[mm]
Ambienttemperature
[°C]
Cableentry
Draw-ingno.
Orderno.
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
500 10...30 300 50 10 -40...100 radial / axially 1 RV6016
1000 10...30 300 50 10 -40...100 radial / axially 1 RV6024
Incremental encoders with hollow shaft
Type Resolution Ub
[V]
f
[kHz]
Iload
[mA]
Shaft
[mm]
Ambienttemperature
[°C]
Cableentry
Draw-ingno.
Orderno.
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
500 10...30 160 50 6 H7 -30...70 radial / axially 2 RA6015
Couplings for encoders
Type Description Orderno.
Flexible coupling with clamp connection [KV] · Ø 10 mm / Ø 10 mm · Housing materials: aluminium E60067
Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60063
Spring disc coupling electrically isolating · Ø 10 mm / Ø 10 mm · Housing materials: diecast zinc / PA E60118
Connectors for encoders
Type Description Orderno.
Socket · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60122
Plug · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60141
Encoders
104Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
10
36 58
f8
1
1,52046,7±0,5
106
48
120°
1 2
1: reference mark, 2: M3 5 mm deep
2
3,3
42
20
6
35
1,52 x
13,5
42,1
21
H7
30°
4,5
Encoders
105
Easy adjustment and parameter setting.
Primary voltage 24V dc or110 / 230V ac, wide-range input.
Programmable switching characteristics.
Standstill, overspeed, direction, slip andfrequency conversion, counter.
Switching relays and transistor outputs,scalable analogue output.
Evaluation systems
Although PLC applications in industrial automation are becoming more and moreversatile there are still numerous processes in practice which require decentralisedmonitoring.
For this ifm electronic offers a number of pulse evaluation systems in the productgroup “ecomat 200”. The application area ranges from simple standstill monitoringor blockage protection of a conveyor belt, maximum speed monitoring in windpower stations, slip monitoring of couplings through to direction monitoring, e.g.twin pumps with non-return valves.
Different units for rail mounting and compact designs in M18 and M30 metalhousings are available. They include microprocessor-controlled units for panemounting to display analogue signals, RPM, speeds, processing times, quantitiesand electronic preset counters for the detection of quantities or linearmeasurement.
All units are distinguished by a high reliability and easy handling. Independent ofthe PLC they indicate operating states or signal faults. This helps to reduce down-times and production loss.
ifm electronic offers the following evaluation systems:
– Speed monitors
– Standstill monitors
– Slip / synchronisation monitors
– Direction monitors
– Frequency-to-current converters
– Threshold relays
– Displays with frequency and analogue input
– Counters
– Switching amplifiers
Pulse evaluationsystems are used fordecentralised moni-toring of drives.
Machine cycles mustalso be monitored in
conveying.
Evaluation systems
106
System overview Page
Universal speed monitors 108
Standard speed monitors 108
Speed monitor with integrated sensor 108
Speed monitors with integrated sensor, ATEX category 3D 109
Accessories 109
Wiring diagrams 109
Scale drawings / drawing no. – CAD download: www.ifm.com 110
Evaluation systems
107
Universal speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-1 · 2 switch points for monitoring overspeed/underspeed and acceptable range
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003
Standard speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring
230 AC (50...60 Hz) / 24 DC
1 PNP 5...5000 – – 1 – 2 DD0001
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP 5...5000 – – 1 1 2 DD0116
Speed monitor with integrated sensor
Type Dimensions
[mm]
Sensingrange
[mm]
Electricaldesign
Ub
[V]
Settingrange
[puls. / min.]
Start-updelay
[s]
Draw-ingno.
Orderno.
Output · Wiring diagram no. 1
M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 3 DI0001*
Output · Wiring diagram no. 2
M30 / L = 81 10 f DC PNP 10...36 DC 30...3000 15 3 DI5003
Output · Wiring diagram no. 3
M30 / L = 81 10 f DC PNP 10...36 DC 3...300 15 4 DI5004
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Evaluation systems
108Product selectors and further information can be found at: www.ifm.com
Speed monitors with integrated sensor, ATEX category 3D
Type Dimensions
[mm]
Sensingrange
[mm]
Electricaldesign
Ub
[V]
Settingrange
[puls. / min.]
Start-updelay
[s]
Draw-ingno.
Orderno.
Output · Wiring diagram no. 1
M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 3 DI001A*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting), Place the fuse outside the hazardous area. . Recommendation: checkthe unit for reliable function after a short circuit.
Accessories
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
Core colours
BN brown
BU blue
BK black
Wiring diagrams
1
BN
BU
L+L1
LN
2
BN
BK
BU
L+
L
3
L+
L
1
3
2
Evaluation systems
109
Scale drawings / drawing no. – CAD download: www.ifm.com
1
45
78
1 4 652
19 20 21 22 23 24
13 14 15 16 17 18
3
97A1 8A2 10 11 12
120
35,5
1
1: mounting on DIN rail
2
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
3
36
8167
58
5
M30
x1,5
9
18
2 LED
pot. 61
4
312
2918
41
M323
36
8167
58
5
M30
x1,5
2 LED
pot. 61
92
Evaluation systems
110Product selectors and further information can be found at: www.ifm.com
Evaluation systems
111
No movings parts means highreliability and long life.
Guided wave radar, capacitive andhydrostatic level sensors.
Outputs for continuous or point levelmeasurement.
Integrated LED display for localindication of the current level.
Suitable for common industrial andprocess fluids.
Level sensors
In industrial applications where fluids or bulk material are used, storage tanks orsilos are used for processing or storing of media. Sensors are used to detect thelevels. Even critical process conditions such as emptying a hydraulic tank or theunintentional overspill of a tank are monitored by level sensors.
Advantages of electronic sensors
Deposits and wear and tear often lead to failures in particular if mechanicalswitches are in contact with the medium. The electronic ifm sensors however cando without any mechanical components. This makes the sensors especially robustand reliable.
Another advantage of electronic sensors is the local indication of the level or theeasy setting of the switching threshold simply by pressing a button.
Measurement technique
For continuous level measurement the level is detected continuously, convertedinto an electrical signal and indicated. Depending on the type the units have freelyprogrammable switching outputs or an analogue output for further processing.
Continuous level sensors from ifm electronic use three different physical measuringprinciples:
For capacitive measurement the probe and the tank form an electrical capacitor.The capacity changes with the level and is converted into a level measurement by amicroprocessor.
For hydrostatic level measurement a measuring cell detects the hydrostatic pressureof the material. Here the pressure change is a measure for the level.
The efector gwr level sensor operates on the principle of guided wave radar.Electromagnetic pulses are transmitted by the sensor head and guided along theprobe. If the microwave pulse hits the medium to be detected, it is reflected andthe time of flight is evaluated by the sensor.
Measurement inthe medium:Probe sensors will bedirectly immersed inthe medium to bemonitored.
For special applica-tions: Capacitiveprobe sensor for
monitoring oils andcoolants.
Level sensors
112
System overview Page
Variable level sensors, guided wave radar 114
Accessories for level sensors LK, LT, LL, LI 114
Accessories for level sensors LR 114
Accessories for level sensors PA, PG, PI, PN, PS, PY 114
Wiring diagrams 115
Scale drawings / drawing no. – CAD download: www.ifm.com 115
Level sensors
113
Variable level sensors, guided wave radar
Type Processconnection
Probe length
[mm]
Activezone
[mm]
Inactive zone
[mm]
Ub
[V]
Mediumtemperature
[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 1 · Connector groups 5, 6, 7
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 1 LR7000
Accessories for level sensors LK, LT, LL, LI
Type Description Orderno.
Flange plate · 65-80 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainlesssteel / Spacer: brass / rubber ring: FPM
E43006
Accessories for level sensors LR
Type Description Orderno.
Probe · Probe length: 450 mm · for level sensors LR · Housing materials: stainless steel E43204
Accessories for level sensors PA, PG, PI, PN, PS, PY
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052
Aseptoflex adapter · Clamp · 1-1.5„ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001
Level sensors
114Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
1
2
L
L+
4
1
3Out 1Out 2
4:2:
Scale drawings / drawing no. – CAD download: www.ifm.com
130
63
M12
x1
G 43
8 6
32
I1
L
50
57A
I2
32
1
7887
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing
Level sensors
115
For liquids and gases.
Special versions for food applications and hazardous areas.
Optional fittings for variable process connection.
Flow monitoring also for aggressive media.
Flow sensors
In almost all fields of process and plant engineering liquids or gases are used forcoolant and lubricant supply of machines and units, ventilation of installations andbuildings and the processing of products. In case of no flow of these mediaconsiderable damage and downtime may result. Thus it is very important to monitorthese media. In modern installations electronic flow monitors are used for thispurpose. They work without wear and tear and without mechanical components.This guarantees reliable monitoring even in case of difficult media over a longperiod.
Operating principle
Electronic flow sensors from ifm electronic operate with different measurementtechniques. They meet all requirements from a simple monitoring function to theexact detection of flow quantities.
Harmonised operating menus ensure that operators who use different flow sensorscan quickly and precisely carry out settings on the sensors. Some flow sensorsfeature an integrated temperature monitor which makes an additional measuringpoint unnecessary. This enables to control processes in the optimum operatingstatus especially with regard to energy savings.
Analogue, binary and pulse outputs offer various possibilities to process themeasured data. Due to the flexible programming by means of pushbuttons theflow sensors can be adapted to different conditions. The sensors are mounted viaadapters.
Monitoring very smallflow rates: Flow moni-tor with flow adapter.
Optimisedconsumption ofcompressed air.
Flow sensors
116
System overview Page
Compact housings for adapters for flow monitoring 118
Compact designs for adapter with flow and temperature monitoring 118
Air flow monitors 119
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 119
Accessories for flow sensors and control monitors 119
Accessories for airflow monitors 120
Wiring diagrams 120
Scale drawings / drawing no. – CAD download: www.ifm.com 120
Flow sensors
117
Compact housings for adapters for flow monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 1 · Connector groups 5, 6
3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 1 SI5000
M12 connector · Wiring diagram no. 2 · Connector groups 5, 6
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 2 SI5002
1/2“ UNF-Connector · Wiring diagram no. 3 · Connector group 11
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 85...265 3 SI5006*
M12 connector · Wiring diagram no. 4 · Connector groups 5, 6
3...300 / - 3...100 -25...80 / - 300 1...10 19...36 2 SI5004
M12 connector · Wiring diagram no. 5 · Connector groups 5, 6
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 2 SI5010
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Compact designs for adapter with flow and temperature monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 2 · Connector groups 5, 6
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 2 SI5007
Flow sensors
118Product selectors and further information can be found at: www.ifm.com
Air flow monitors
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime
[s]
Ub / tolerance
[V] / [%]
Draw-ingno.
Orderno.
Cable 2 m · Wiring diagram no. 6
100...1000 100...400 -10...50 3...60 80...250 AC/DC 4 SL0101*
Cable 2 m · Wiring diagram no. 7
100...1000 100...400 -10...50 3...60 24 AC 4 SL0201*
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 5 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 8 · Connector groups 5, 6
G1 0.2...100.0 -10...80 16 < 0.250 19...30 5 SU8000
G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 6 SU9000
Accessories for flow sensors and control monitors
Type Description Orderno.
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40099
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404
E40124
Flow sensors
119You can find wiring diagrams and scale drawings from page 120
Accessories for airflow monitors
Type Description Orderno.
Mounting clamp · Ø 23 mm · for air flow monitor SLG · Housing materials: PBT E40048
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
L+
L
1
4
3
2
L
L+
3
2
4
1
S2 S1
3
1
3
4
2
5
n.c.
L1
N
Out
4
L+
L3
2
4
1
n.c.
5
P
L+1
4
3
2
L
6
BN
WH
BU
BK
L1
N
L+
L
7
BN
WH
BU
BKL1
N
8
4
1
3
2 OUT2/InD
L+
L
BN
BU
OUT1
WH
BK
Scale drawings / drawing no. – CAD download: www.ifm.com
1
22
1 2
3
113
60 65
14
7,7
45
50
27
63
M12
x1
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
2
22
1 2
113
60 65
14
8,2
45
50
27
63
M12
x1
3
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
Flow sensors
120Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
3
22
1 2
113
60 65
14
8,2
45
50
27
63
" 20
UN
F 2
A2
13
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
4
140133
113
32
23
2 LED
pot.2 LED
5
80,5
M12
x1
G1
13096
100
G1
installation length with pipe adapter E40152 / E40155: 205 mm,installation length with pipe adapter E40153 / E40156: 215 mm
6
80,5
M12
x1
26
48
13096
100
G1
41
G1
41
Flow sensors
121
Transmitters or sensors with integrated control monitor.
Units with special design for hygienic applications.
Measuring principles with overload protection and a good long-term stability.
Measuring range from -1…600 bar.
Variable process connection and sealing technology via adapter.
Pressure sensors
ifm offers a wide range of electronic pressure and vacuum sensors to meet therequirements of various industrial applications. The ceramic-capacitive measuringcell, tried and tested a million times, is complemented by a stainless steel measuringcell with thick-film wire strain gauges (series PK, PV, PT) and a piezoresistivemeasuring technique (for pneumatic applications).
All units have robust housings and do not require moving parts such as pistons orsprings. The result: the sensors are extremely shock and vibration resistant andoperate without any wear or maintenance.
The tried and tested ceramic-capacitive measuring principle is corrosion-resistantand long-term stable. In the long run this guarantees continuous accuracy of themeasured values. The sensors are resistant to dynamic pressure peaks andguarantee high overload resistance even in the case of extreme pressure peaksthat occur for example with fast closing valves.
Units with wire strain gauge in thick-film technology on a stainless steel measuringcell are distinguished by their very compact and robust design. They can be usedin almost all industrial areas. The welded stainless steel measuring cell withoutany seals ensures a high degree of safety, in particular for applications with gaspressures of up to 400 bar as well as in air-conditioning and refrigerating technol-ogy where aggressive coolants (freons) are used.
Local display:the clearly readableLED display showsthe current systempressure.
Separate display /programming unit
PP2001.
Pressure sensors
122
System overview Page
Sensors with switching outputs and analogue outputs and display 124
Sensors with switching outputs and display 124 - 125
PK sensors with mechanical setting and switching outputs 125 - 126
PT sensors for industrial applications with analogue outputs 126
PA / PPA sensors for industrial applications with analogue outputs / AS-i 126 - 127
PL / PM sensors without display for hygienic and wet areas with analogue output 127
Fixing components for pressure sensors 127
Accessories and software 127 - 128
Adapters and accessories for adapters 128
Flange adapters 128
Wiring diagrams 128 - 129
Scale drawings / drawing no. – CAD download: www.ifm.com 129 - 131
Pressure sensors
123
Sensors with switching outputs and analogue outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 7 · Connector groups 5, 6
G¼ I Display unit 0...400 600 1000 20...30 1 PN2020
G¼ I Display unit 0...250 400 850 20...30 2 PN2021
G¼ I Display unit -1...10 75 150 20...30 2 PN2024
G¼ I Display unit -1...1 20 50 20...30 2 PN2009
¼" NPT Display unit 0...250 400 850 20...30 3 PN2221
¼" NPT Display unit -1...25 100 350 20...30 3 PN2223
M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · Wiring diagram no. 1 · Connectorgroups 5, 6
G¼ I Display unit 0...600 800 1200 18...36 4 PN3060
G¼ I Display unit 0...400 600 1000 18...36 4 PN3000
G¼ I Display unit -1...10 75 150 18...36 5 PN3004
Sensors with switching outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6
G¼ I Display unit 0...400 600 1000 18...36 4 PN5000
G¼ I Display unit 0...250 400 850 18...36 5 PN5001
G¼ I Display unit 0...100 300 650 18...36 5 PN5002
Pressure sensors
124Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6
G¼ I Display unit 0...25 150 350 18...36 5 PN5003
G¼ I Display unit -1...10 75 150 18...36 5 PN5004
G¼ I Display unit 0...2.5 20 50 18...36 5 PN5006
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 8 · Connector groups 5, 6, 7
G¼ I Display unit 0...400 600 1000 18...36 4 PN7000
G¼ I Display unit 0...250 400 850 18...36 5 PN7001
G¼ I Display unit 0...100 300 650 18...36 5 PN7002
G¼ I Display unit 0...25 150 350 18...36 5 PN7003
G¼ I Display unit -1...10 75 150 18...36 5 PN7004
PK sensors with mechanical setting and switching outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 5, 6, 7
G¼ A / M5 I Operation 0...400 600 1600 9.6...32 6 PK5520
G¼ A / M5 I Operation 0...250 400 1000 9.6...32 6 PK5521
G¼ A / M5 I Operation 0...100 200 1000 9.6...32 6 PK5522
G¼ A / M5 I Operation 0...25 60 500 9.6...32 6 PK5523
Pressure sensors
125You can find wiring diagrams and scale drawings from page 128
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 5, 6,7
G¼ A / M5 I Operation 0...250 400 1000 9.6...32 6 PK6521
G¼ A / M5 I Operation 0...100 200 1000 9.6...32 6 PK6522
G¼ A / M5 I Operation 0...10 25 300 9.6...32 6 PK6524
M12 connector · Output function normally open / closed complementary · DC NPN · Wiring diagram no. 4 · Connector groups 5, 6,7
R¼ A / M5 I Operation 0...400 600 1600 9.6...32 7 PK8730
PT sensors for industrial applications with analogue outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 5 · Connector groups 5, 6
G¼ A – 0...100 200 1000 8.5...36 8 PT3542
G¼ A – 0...10 25 300 8.5...36 8 PT3544
PA / PPA sensors for industrial applications with analogue outputs / AS-i
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 5 · Connector groups 5, 6
G¼ I – 0...400 600 1000 9.6...32 9 PA3020
G¼ I – 0...250 400 850 9.6...32 9 PA3021
G¼ I – 0...100 300 650 9.6...32 10 PA3022
G¼ I – 0...25 150 350 9.6...32 10 PA3023
Pressure sensors
126Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 5 · Connector groups 5, 6
G¼ I – 0...10 75 150 9.6...32 10 PA3024
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 6 · Connector groups 5, 6
G¼ I – 0...400 600 1000 16...32 11 PA9020
G¼ I – 0...250 400 850 16...32 10 PA9021
PL / PM sensors without display for hygienic and wet areas with analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 9 · Connector groups 5, 6
Aseptoflex – -0.5...10 50 150 14...30 12 PM2054
Aseptoflex – -0.0125...0.25 10 30 14...30 12 PM2058
M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC · Wiring diagram no. 9 · Connector groups 5, 6
G1 A – -0.5...10 50 150 14...30 13 PM2654
Fixing components for pressure sensors
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Accessories and software
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Pressure sensors
127You can find wiring diagrams and scale drawings from page 128
Type Description Orderno.
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
Adapters and accessories for adapters
Type Description Orderno.
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30050
Flange adapters
Type Description Orderno.
Aseptoflex adapter · Clamp · 1-1.5" · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001
Aseptoflex adapter · pipe fitting · DN40 (1.5") · SMS · for units with Aseptoflex adapter · Housing materials: stainless steel 316L /1.4404
E33031
Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052
Wiring diagrams
1
L+
L3 BU
4 BK
2 WH
1 BN
2
L+
L
1
4
3
3
4
L
L+1
2
32:4:
4
L
L+
4:32:
4
2
1
5
L+
L
1
2
6
L+
L
1
3
2
Pressure sensors
128Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
7
4
L
L+
2
1
3Out 1Out 2
4:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
4
1
3
2L+
LOut 1Out 2
4:2:
2
1
3
4L+
LOut 1Out 2
4:2:
8
Out 1Out 2
4
L
L+
2
1
34:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
9
L+
L
1
2
L+
L
1
3
2
Scale drawings / drawing no. – CAD download: www.ifm.com
1
30
47,8
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
2
91,5
34
27
1,3
21,5
2 3
1
30
47
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
3
91,5
34
27
2 3
1
30
47
57,3
M12
x1
12
"NPT1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
4
30
48
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
Pressure sensors
129
Scale drawings / drawing no. – CAD download: www.ifm.com
5
91,5
34
27
1,3
21,5
2 3
1
30
48
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
6
61,6
12
M12 x127
27
71,6
G1 4/
M5
7,5
2
1
1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14
7
60,6
13
R 41
M12 x127
27
70,6
M5
7,5
1
1: tightening torque 25 Nm
8
22
1
51,2
12
G1 4/
65,1
M12 x122
1: sealing FPM / DIN 3869-14, tightening torque 25 Nm
9
75
M12 x130
30
27
1,3
21,5
14
G 41
1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.
10
75
M12 x130
30
27
1,3
21,5
14
G 41
11
77,5
M12 x130
30
27
1,3
21,5
16,5
G 41
12
36
107
34
15
M12 x1
121,
5
48
1 2
1: Aseptoflex sealing edge, 2: Aseptoflex thread
Pressure sensors
130Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
13
41 20°1
117,
3
34M12 x1
131,
5
48
27
G1
25,4
1: tightening torque 20 Nm
Pressure sensors
131
Increased process safety due to self-monitoring.
Integrated or separate control monitors selectable.
Modular concept –tailor-made for every application.
Optional fittings for variable connection.
Robust construction for high resistanceto shock and vibration.
Temperature sensors
The temperature sensors of ifm electronic are based on a PT100 or PT1000 resistor.The measured temperature value corresponds to a change in resistance and is con-verted into an electrical analogue signal. A microprocessor controls the evaluationof the electrical signal. The current system temperature is indicated by LEDs directlyon the control monitor.
The microprocessor and the display make process adjustment much easier. The usercan set the values for the switch points, hysteresis and measuring range by meansof programming buttons even without the system temperature being applied. Thisenables installation and setup of the system within a few minutes. The values aresafely stored in an EEPROM independent of the supply voltage.
Film technology is used for the electronic circuitry. A flexible, temperature-resistantand extremely resistant polyimide film is used as carrier of the SMD components.Together with a special potting method an extreme shock and vibration resistance isachieved.
From sensor to system
A complete temperature measurement system usually consists of severalcomponents. The temperature in a medium is detected by a sensor and is convertedinto an electrical measured signal. The mechanical design and the dimensions ofthe sensors must vary to enable use for different media and measuring points.Depending on the application ifm electronic offers a selection of robust probe sen-sors or types with connection cables. To indicate and process the measured valuethe sensor is connected to a separate control monitor. It indicates the measuredvalue on its integrated display. To complete the modular systems ifm electronicoffers compact temperature sensors with integrated control monitors. If a local tem-perature display is not required, temperature transmitters are frequently used.ifm electronic provides units with excellent response time (TA series) that eitherhave standard output signals or an integrated AS-i interface. In hygienic applicationsthe self-monitoring, calibration-free temperature transmitter TAD is an excellentchoice.
Local display of thecurrent temperature.
Imperative: tempera-ture monitoring in air
conditioning.
Temperature sensors
132
System overview Page
Compact temperature sensors with display, IO-Link 134
Control monitors for temperature sensors, IO-Link 134
Temperature transmitters for standard applications 134
Temperature transmitters for hygienic and wet areas 134
Accessories for temperature sensors TN / TR 134 - 135
Thermowells for temperature sensors 135
Adapters 135
Wiring diagrams 135
Scale drawings / drawing no. – CAD download: www.ifm.com 136
Temperature sensors
133
Compact temperature sensors with display, IO-Link
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 1 · Connector groups 5, 6
-40...150 M18 x 1.5 45 18...32 1 / 3 1 TN2531
Control monitors for temperature sensors, IO-Link
Type Measuringrange[°C]
Processconnection
Display
LED
Ub
[V]
Currentconsump.
[mA]
Iload
[mA]
Drawingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 2 · Connector groups 5, 6
-40...300 G½ A Display unit 18...32 50 250 2 TR2432
Temperature transmitters for standard applications
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 5, 6
0...140 G¼ A 60 10...30 1 / 3 3 TA3130
Temperature transmitters for hygienic and wet areas
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 5, 6
0...140 G½ A 87.5 10...30 1 / 3 4 TA3430
Accessories for temperature sensors TN / TR
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Temperature sensors
134Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Thermowells for temperature sensors
Type Description Orderno.
Thermowell for temperature sensors · G ½ · Probe length: 53 mm · for type TA34xx, TAA431, TAD191 · Housing materials: stainlesssteel 316L / 1.4404
E30393
Adapters
Type Description Orderno.
Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404
E40124
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404
E40099
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Adapter · M18 x 1.5 - ½" NPT · Insertion depth of the probe of SID, SFD, TN: · 23 mm · Housing materials: stainless steel 316L /1.4404
E40107
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
Wiring diagrams
1
4
1
3
2L+
L
2
1
3
4L+
L
Temperature sensors
135
Wiring diagrams
2
L+
L
1 BN
2 WH
4 BK
3 BUTR 2432
1
2
3
4
2
B
1
2
3
4
3
1
1
2
3
4
B
B
Scale drawings / drawing no. – CAD download: www.ifm.com
1
4514
128
34
8,2
2 3
1
48
94,5
M12
x1
22 4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: internal thread M18 x 1.5
2
93
34
16,5
G 21
2 3
1
30
48
60M
12x1
4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor
3
4460
8,2
M12x130
27
13,7
117,
7
13,5
G 41
4
G 21
43,8 1238,
210
M12
x130
27
18,3
13,7
47,5
180,5
LED
87,5
Temperature sensors
136Product selectors and further information can be found at: www.ifm.com
Temperature sensors
137
Online vibration diagnosis – optimumprice / performance ratio.
Decentralised monitoring of plant and equipment integrated into the machine.
Compact field units and modular control cabinet units.
Digital and analogue alarm outputs.
Standard data interface (OPC).
Diagnostic systems
efector octavis is a vibration monitor which not only detects vibration data, but alsocarries out signal analysis and machine diagnosis directly on the machine. Themachine condition is determined and is forwarded to the PLC or to SCADAsoftware. It fulfils the main requirements for modern machine monitoring: compati-bility, modularity and transferable configuration.
Compatible and modular
The compatibility with data structures such as the OPC interface makes it possibleto integrate condition data into a higher-level system. With the requirement formodularity the user can define the extent of condition monitoring to be implemen-ted – this means the complete range of diagnosis is possible right from the “firstunit”. Transferable configuration is attained with application-related parameter sets.A wizard function in the software guides the user through creating, managing andarchiving the monitoring parameters.
Trend memory
All units of the octavis family type VE / VSE feature an internal trend memory whichensures detailed analysis and optimisation of the application even without externaldata recording. The storage intervals are freely selectable. This means that thestorage length of the non volatile ring buffer is adjusted to the requirements.
The suitable system for your application:
– Standard vibration characteristic values / permanent machine protection: VSE, VE, VK, VT
– Internal trend memory / root cause analysis: VSE, VE
– Online diagnosis / early damage detection: VSE (VE partly)
– Network capability of the system: VSE (VE partly*)
– Load meter: VSE
*Profibus DP gateway
Internal trend memory(type VE / VSE) of allmonitored diagnosisfactors can be evalu-ated via PC software.
Easy vibrationmonitoring: Type VK
provides a com-bination of switching
output and trans-mitter function in
conjunction with thetried and tested
easy-turn concept.
Diagnostic systems
138
System overview Page
Accessories VB / VE 140
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 140
Accessories VK 140
Vibration sensors for connection to external diagnostic electronics VSE - type VSA 140
Scale drawings / drawing no. – CAD download: www.ifm.com 140
Diagnostic systems
139
Accessories VB / VE
Type Description Orderno.
Y connection cable · 2 way · Free from halogen · 0.25 m · Housing materials: TPU E11664
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK
Type Description Draw-ingno.
Orderno.
Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range veff: 0...25 mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404
1 VKV021
Accessories VK
Type Description Orderno.
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
Vibration sensors for connection to external diagnostic electronics VSE - type VSA
Type Description Draw-ingno.
Orderno.
Vibration sensor · for connection to external diagnostic electronics · Connector · housing: stainless steel 316L / 1.4404 2 VSA001
Scale drawings / drawing no. – CAD download: www.ifm.com
1
63,7
11
M12 x127
27
73,1
M81
1: tightening torque 15 Nm
2
18,5
M8
x1,2
5
M12
x117
5324
178
1
1: conical angle = 90°
Diagnostic systems
140Product selectors and further information can be found at: www.ifm.com
Diagnostic systems
141
Manufacturer-independent standard.
Worldwide acceptance as a wiring system.
Communication from the sensor to the controller.
“Safety at Work” for safety-related applications.
Intelligent system solutions for special tasks.
Bus system AS-interface
AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent stan-dard for the connection of actuators and sensors of the first field level. It is the onlywiring system accepted worldwide. With 15 million slaves installed AS-i has beentried and tested as a low-cost feeder for all common fieldbuses for many years.
The product range includes AS-i components for different areas from packagingand conveying via silo applications, machine tools, robotics and automation to thefood industry and mobile vehicles.
Safe
The sophisticated AS-i technology and the extended diagnostic possibilities providehigh reliability and machine uptime.
“Safety at Work” is the extension of the AS-interface by safety-related components.Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.
Easy
Due to the standardised system, the low wiring complexity and the quick connec-tion technology, AS-i enables simple “Plug & Play”. The reduction of terminals leadsto reduced documentation.
Data and energy are jointly transmitted via a two-wire cable. The reverse polarityprotected insulation displacement technology helps avoid errors. The modularityand the tree structure smoothly fit to the way the plant is put together.
Cost-optimised
It’s the end result that matters: Wiring complexity, documentation and set-up timesare significantly reduced. The decentralisation of the AS-i participants leads tosmaller and less expensive control cabinets. Simple diagnosis and a clear systemdesign result in high machine uptime and avoid downtimes.
With “Safety atWork” AS-i alsosolves safety-related tasks.
Reduced cost:reduced wiring com-
plexity for fasterinstallation and fewer
error sources.
Bus system AS-interface
142
System overview Page
Field modules IP67 144
Module lower parts 144
Flat cable splitters and accessories 144
Accessories lower parts and addressing units 144 - 145
Scale drawings / drawing no. – CAD download: www.ifm.com 145
Bus system AS-interface
143
Field modules IP67
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputsActive ClassicLine module · Addressing socket · Three orientations of the flat cable are
possible · Digital inputs · Sockets M12 x 1 · PA1 AC5205
4 outputsActive ClassicLine module · Addressing socket · Three orientations of the flat cable are
possible · Digital outputs · Sockets M12 x 1 · PA1 AC5208
Module lower parts
Type Inputs /outputs
Description Draw-ingno.
Orderno.
FC coupling moduleModule lower part flat cable · AS-i interface to module upper part · Quick mounting
technology for AS-i flat cable · PBT2 AC5000
SC coupling module Module lower part set · AS-i interface to module upper part · Screw terminal · PBT 3 AC5031
Flat cable splitters and accessories
Type Description Orderno.
FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA E70096
T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10803
Protective cap · M12 · for M12 sockets of ClassicLine modules, CompactLine modules and AirBoxes · Housing materials: PA black E73004
Accessories lower parts and addressing units
Type Description Orderno.
Module lower part set · Screw terminal · Housing materials: PBT AC5031
Use of the lower part as branching box · Housing materials: plastics AC3000
Bus system AS-interface
144Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules
AC4000
Flat cable seal · Housing materials: ULTRAMID / sealing: NBR · Pack quantity: 10 E70413
Scale drawings / drawing no. – CAD download: www.ifm.com
1 2
80
206
35
66
31
9,65,3
45
7 7
77
3
8082,5
336
35
66
45
9,65,3
31
7 7
77
Bus system AS-interface
145
Controllers, I/O modules, displaysand sensors for mobile applications.
Compact and extremely robust design.
Extensive range of accessories forinstallation and diagnostics.
CAN interface with CANopen protocol.
e1 type approval of the GermanFederal Office for Motor Traffic.
Control technology for mobile applications
Life today cannot be imagined without electronics in modern motor vehicles andmobile machines. Many necessary and convenient functions could not beimplemented without electronic support. In contrast to electronics in consumergoods and “normal” industrial applications such as packaging machines and con-veyors the requirements for components for mobile applications are much higher.
Electronic requirements
The components need to be carefully selected, mainly because of the extrememechanical stress caused by impacts and shocks and the use at extreme operatingtemperatures. The direct influence of dirt, humidity and water often cannot beexcluded in field applications. Therefore a high protection rating and a specialselection of the materials are required for the devices.
In addition to mechanical and environmental influences, electrical interferenceaffecting the whole system as well as individual devices, have to be taken intoaccount. A wide supply voltage range and well-adapted protective measures ensuresafe operation of the devices even in case of large voltage fluctuations by thebattery / generator system. Strong conducted or radiated interference must notinfluence the function either.
For device networking the CAN bus has become the successful standard in the lastfew years. Whereas for the high volume production of passenger cars special,optimised and well-adapted protocols are used, the CANopen protocol has becomeindispensable in mobile machines. Manufacturer and industry-specific protocols,such as diagnostic engine data according to SAE J 1939, can be coupled to themachine process via gateways.
Extreme shock andvibration: Reliablefunction of the sensi-tive electronics mustbe guaranteed underharsh operatingconditions as well.
Especially whenseveral machine parts
are interconnectedCAN offers decisive
advantages.
Control systemsfor mobile vehicles
146
System overview Page
PDM360 smart with 2.5" monochrome display 148
Inductive sensors for mobile applications 148
Electronic pressure sensors for mobile applications 148 - 149
Accessories for M12 modules and displays 149
Accessories for sensors for mobile applications 149
Wiring diagrams 149
Scale drawings / drawing no. – CAD download: www.ifm.com 150
Control systemsfor mobile vehicles
147
PDM360 smart with 2.5" monochrome display
Type Displayresolution
(pixels)
Displaytype
Displayillumination
Description Draw-ingno.
Orderno.
128 x 64 COG monochr. LED 1 CR1070
Inductive sensors for mobile applications
Type Dimensions
[mm]
Sensingrange
[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 6 m · Output function · DC PNP · Wiring diagram no. 1
M18 / L = 81 8 f stainless steel 10...36 IP67 / IP69K 200 100 2 IGM202
M12 connector · Output function · DC PNP · Wiring diagram no. 2
M18 / L = 70 8 f stainless steel 10...36 IP67 / IP69K 200 100 3 IGM200
f = flush / nf = non flush
Electronic pressure sensors for mobile applications
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · Wiring diagram no. 3 · Connector groups 5, 6
G¼ I – 0...400 600 1000 9.6...32 4 PA3020
G¼ I – 0...250 400 850 9.6...32 4 PA3021
G¼ I – 0...100 300 650 9.6...32 5 PA3022
G¼ I – 0...25 150 350 9.6...32 5 PA3023
G¼ I – 0...10 75 150 9.6...32 5 PA3024
M12 connector · Output function 0...10 V analogue · Wiring diagram no. 4 · Connector groups 5, 6
G¼ I – 0...400 600 1000 16...32 6 PA9020
Control systemsfor mobile vehicles
148Product selectors and further information can be found at: www.ifm.com
Process and dialogue module PDM360 smart · Intelligentcompact display for use in mobile machines · 2.5" mono-chrome display · 12 freely program. backlit function keys· Programming according to IEC 61131-3 · 10...32 V DC
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 0...10 V analogue · Wiring diagram no. 4 · Connector groups 5, 6
G¼ I – 0...250 400 850 16...32 5 PA9021
Accessories for M12 modules and displays
Type Description Orderno.
Fixing set · e.g. for process and dialogue monitors PDM360, PDM360 compact or PDM360 smart · for control cabinet mounting ·consisting of: · 4 mounting brackets, 4 cylinder screws
EC1453
Seal and vibration absorber · for process and dialogue modules PDM360 smart, PDM360 compact EC1450
Accessories for sensors for mobile applications
Type Description Orderno.
Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
L+
L
1
2
4
L+
L
1
3
2
Control systemsfor mobile vehicles
149
Scale drawings / drawing no. – CAD download: www.ifm.com
1
46,453,4
109
165
F2 F3F1
F5 F6F4
okesc
2
64
LED 4 x 90° 24
81
5750
M18
x1
4
3
M18
x1
M12
x1
5057
7059
424LED 4 x 90°
4
75
M12 x130
30
27
1,3
21,5
14
G 41
1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.
5
75
M12 x130
30
27
1,3
21,5
14
G 41
6
77,5
M12 x130
30
27
1,3
21,5
16,5
G 41
Control systemsfor mobile vehicles
150Product selectors and further information can be found at: www.ifm.com
Control systemsfor mobile vehicles
151
International approval package andwide-range input for worldwide use.
Partly adjustable output voltage.
Power reserves to cover temporary overload or supply failure.
Output short-circuit, overload, andno-load protected.
State signalled via DC-ok output.
Power supplies
Transformer power supplies provide a low voltage, normally 24 V DC. A transformeraccording to DIN 0551 ensures a safe electrical separation from mains voltage andlow voltage. The output voltage can be regulated (± 5 %) or smoothed by means ofcapacitors. The different designs and output powers allow adaptation to diverseoperating conditions.
Switched-mode power supplies
Primary switched-mode power supplies are a compact and economical solution tosupply sensors and actuators. As opposed to conventional transformer powersupplies with regulated output voltage primary switched-mode power supplies needno heavy transformers so that there are fewer iron and copper losses. They aretherefore distinguished by a very high degree of efficiency of up to 92 %. Due tothe operating principle by means of high frequency transformers switched-modepower supplies are much smaller and lighter than transformer power supplies withidentical power. Nevertheless they guarantee an electrical separation. Furthermore,they offer a wide input voltage range as standard, e.g. 340 to 576 V AC. Thismakes them fit for worldwide use.
ifm switched-mode power supplies have a regulated output voltage of typ. 24 V DCwith a tolerance of ± 2 %. Apart from few exceptions the output voltage can be setbetween 24 V and 28 V to compensate for example for a voltage drop on longcables. Between no load and full load they ensure a stable supply voltage and thusoperational reliability in case of supply voltage fluctuations.
Power reserves
Mains fluctuations up to ± 15 % and mains interference are compensated for. Evenmains voltage dips of a few milliseconds are compensated for, the output voltage iscompletely maintained. An active inrushcurrent limitation reduces the inrush current via a fixed resistor which is bridgedafter start up.
The outputs are protected against short circuits and overload.
Suitable for theapplication: ifmprovides powersupplies in differentpower classes.
Power supplies
152
System overview Page
Standard switched-mode power supplies, single phase, discontinued types 154
Standard switched-mode power supplies, single phase 154
Standard switched-mode power supplies, three phases 154
Scale drawings / drawing no. – CAD download: www.ifm.com 154 - 155
Power supplies
153
Standard switched-mode power supplies, single phase, discontinued types
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
2.5 24 DC (+5% / -1%) 115 / 230 AC > 20 87.5 1 DN2011
5 24 DC (+5% / -1%) 115 / 230 AC > 37 90 2 DN2012
1.3 24...28 DC (±2%) 115 / 230 AC> 190 (230 V AC; 24 V DC / 1.3 A)
87.5 3 DN1020
Standard switched-mode power supplies, single phase
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
10 24...28 DC (±2%) 115 / 230 AC > 20 90 4 DN2013
20 24...28 DC (±2%) 230 AC > 20 91 5 DN2014
Standard switched-mode power supplies, three phases
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
20 24...28 DC (±2%) 3 x 400 AC > 11 92 6 DN2034
Scale drawings / drawing no. – CAD download: www.ifm.com
1
89
4
107
124
49
LED 131
2
124
64
LED 131
89
4
107
Power supplies
154Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
3
35,5
964575 83
LED
pot.
4
89
4
107
124
120
131
LED
5
124
220
131
LED
227
89
4
107
6
89
4
107
124
220
131
227
LED
Power supplies
155
Complete product range: sockets, plugs, jumper cables, splitter boxes.
Various cable materials for different applications.
High-quality materials for maximum reliability.
“ecolink” series with innovative quality features.
Integrated LEDs for easy diagnosis.
Connection technology
With a wide variety of different sensor designs ifm electronic offers a wide range ofhigh quality connectors. The choice of types covers common M8, M12, M18 typesthrough to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer addi-tional quality features.
ecolink - a new dimension in connection technology
Due to the special installation of a mechanical end stop the O-ring is alwayscorrectly compressed and so permanently maintains its sealing function. The con-nector remains securely positioned on the unit even in case of extreme vibrationand impacts. Novel design and a transparent black housing ensure that even inbright lighting conditions the LEDs are more clearly visible than with the cleartransparent versions.
For industrial applications:
High-quality materials suited to the requirements in industrial environments. Largelyresistant to oils, greases and coolants.
For hygienic and wet areas:
PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts arethe optimum choice for long life.
For hazardous areas
Connection technology for ATEX categories 2D, 3D and 3G. With the EC typeexamination certificate for components from DEKRA EXAM the connection tech-nology meets the strictest requirements.
For welding applications
Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated couplingnuts prevent weld spatter sticking. The cables are also suited for drag chains andtorsional movements.
For sensors in robust applications:
The saw tooth contoured vibration protection secures against strong shocks andvibrations. The high protection rating, wide temperature range and high-qualityhousing materials (high-grade stainless steel, TPU) ensure permanent safe con-nection in harsh environments.
Black, transparenthousing for optimumLED visibility.
Maximum operationalreliability due to the
new vibration protec-tion with end stop.
Connection technology
156
System overview Page
M8 sockets for industrial applications 158
M12 sockets for industrial applications 158 - 159
1/2" sockets for industrial applications 160
M8 cable plugs for industrial applications 160
M12 cable plugs for industrial applications 160 - 161
M12 - M12 jumpers for industrial applications 161
Valve – plug jumpers for industrial applications 162
Connectors for hygienic and wet areas 162
Connectors for hazardous areas 162
Wiring diagrams 163
Scale drawings / drawing no. – CAD download: www.ifm.com 164
Connection technology
157
M8 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 1 · Socket M8, 3-pole, 3-wire · Wiring diagram no. 1
5 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 1 EVC142
Group 2 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 2
2 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 2 EVC150
5 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 2 EVC151
Group 3 · Socket M8, 4-pole, 3-wire · Wiring diagram no. 2
5 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 3 EVC154
M12 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 4 · socket M12, 2-pole + PE, 3-wire · Wiring diagram no. 3
2 m orangePVC cable
3 x AWG 22 (3 x0.34 mm2), Ø 5 mm
TPU /brass
250 AC300 DC
-25...90 IP67 – 4 E10865
2 m orangePVC cable
3 x AWG 22 (3 x0.34 mm2), Ø 5 mm
TPU /brass
250 AC300 DC
-25...90 IP67 – 5 E10867
Group 5 · Socket M12, 4-pole · Wiring diagram no. 4
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 6 E11509
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 7 E11508
Group 6 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 2
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC004
Connection technology
158Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 6 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 2
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC005
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC006
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 9 EVC001
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 9 EVC002
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 9 EVC003
Group 7 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 5
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow10 EVC007
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow10 EVC008
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow10 EVC009
Group 8 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 6
5 m blackPUR cable 5 x 0.34 mm2, Ø 4.9 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 9 EVC071
Group 9 · Socket M12, 8/7-pole, 8-wire · Wiring diagram no. 7
5 m blackPUR cable 8 x 0.25 mm2 TPU /
brass30 AC36 DC
-40...80 IP67 – 11 E12166
Connection technology
159You can find wiring diagrams and scale drawings from page 163
1/2" sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 10 · socket 1/2", 2-pole + PE, 3-wire · Wiring diagram no. 8
5 m yellowPVC cable
3 x AWG22, Ø 5.2 mmTPU /brass
250 AC300 DC
-25...90 IP67 – 12 E10200
2 m yellowPVC cable
3 x AWG22, Ø 5.2 mmTPU /brass
250 AC300 DC
-25...90 IP67 – 13 E10189
5 m yellowPVC cable
3 x AWG22, Ø 5.2 mmTPU /brass
250 AC300 DC
-25...90 IP67 – 13 E10191
Group 11 · socket 1/2", 5-pole, 4-wire · Wiring diagram no. 9
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.7 mm
TPU /brass
300 AC -25...90 IP67 – 14 E11250
M8 cable plugs for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 12 · Plug M8, 3-pole · Wiring diagram no. 10
wirable –PA /brass
60 AC75 DC
-25...90 IP68 – – E11550
M12 cable plugs for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 13 · Plug M12, 4-pole, 4-wire · Wiring diagram no. 11
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 15 EVC076
Group 14 · Plug M12, 4-pole · Wiring diagram no. 12
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 16 E11505
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 17 E11504
Connection technology
160Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 15 · Plug M12, 5-pole · Wiring diagram no. 13
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
125 AC/DC -25...85 IP68 – 18 E11506
M12 - M12 jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 16 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 14
0.3 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 19 EVC015
0.6 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 19 EVC016
1 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 19 EVC017
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 19 EVC018
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 19 EVC019
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 20 EVC013
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 20 EVC014
Group 17 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 15
1 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow21 EVC022
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow21 EVC023
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow21 EVC024
Connection technology
161You can find wiring diagrams and scale drawings from page 163
Valve – plug jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 18 · Jumper , plug: M12, 3-pole, valve plug: Housing A, 4-pole, 3-wire, LED · Wiring diagram no. 16
5 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm
PUR /brass
24 AC/DC -25...80 IP67 yellow 22 E11420
Connectors for hygienic and wet areas
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 19 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 2
5 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 23 EVT004
10 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 23 EVT005
5 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm
PVC /stainless steel316L / 1.4404
250 AC300 DC
-25...100IP67 / IP68 /
IP69K– 24 EVT001
Connectors for hazardous areas
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 20 · Socket M12, 4-pole, 4-wire · Wiring diagram no. 2
5 m bluePUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
...30 DC -25...90IP67 / IP68 /
IP69K– 25 ENC05A
Group 21 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 2
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /stainless steel316L / 1.4404
60 AC60 DC
-20...60 IP67 – 26 EVC05A
Connection technology
162Product selectors and further information can be found at: www.ifm.com
Core colours
BK black
BN brown
BU blue
WH white
GN/YE green/yellow
GN green
GY grey
PK pink
RD red
YE yellow
RD/BK red/black
RD/WH red/white
Wiring diagrams
1
1
3
BN
BU
4 BK
2
1
2
3
4
BN
WH
BU
BK
3
1
2
3
GN/YE
BK
BU
4
1
2
3
4
5
out
out
L+
L
1
3
4
YE GN
BN
BU
BK
2 WH
YE
6
1
2
3
4
5
BN
WH
BU
BK
GY
7
1
2
3
4
WH
BN
GN
YE
5 GY
6 PK
7 BU
8 RD
8
1
2
3
GN
RD/BK
RD/WH
9
1
2
4
5
BK
BU
BN
WH
10
1
3
4
11
1
2
3
4
BN
WH
BU
BK
12
1
2
3
4
13
1
2
3
4
5
14
1
2
3
1
2
3
4 4
15
out
out
L+
L
1
3
4
GN YE
2
1
3
4
2
YE
16
1
2
YE4
3
5
Connection technology
163
Scale drawings / drawing no. – CAD download: www.ifm.com
1
9
10 31
M8x1 1
4
3
2
9
10 31
M8x1
4
3
2
1
3
9
10 19
M8x1 25,5
4
3
2
1
4
15
M12 x1
39
27
10,5
3
1
2
5
15
M12 x1
10,5
433
1
2
6
35
18
20
M12 x1
30
3
1 2
4
7
18
M12 x1
46
3
1 2
4
8
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
9
15,5
M12x1 45
14
3
1 2
4
5
10
15,5
M12x1 36,5
26,5
143 LED 3
1 2
4
5
11
15
M12 x1
43
4
1 2
65
378
12
27
10,5
15
39
G 21
3
1
2
Connection technology
164Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
13
42
10,5
15
G 21
3
1
2
14
15
M12 x1
10,5
43
32
5 1
4
15
15,5
M12x1 49,5
14
43
2 1
16
42
18
15
20
M12 x1
31
43
2 1
17
5220
M12 x1
43
2 1
18
5220
M12 x14
2 1
3
5
19
49,5
14
L
15,5
M12x1
M12x1
26,5
14
36,5
15,5
43
2 1
3
1 2
4
5
20
49,5
14
15,5
M12x1
45
14
L
15,5
M12x1
43
2 1
3
1 2
4
5
21
49,5
14
L
15,5
M12x1
M12x1
26,5
14
36,5
15,5
LED
43
2 1
3
1 2
4
5
22
L 17,5 29,529
,5
M12
x1
47
LED
M 3
28,5
435 2 1
23
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
24
15,5
45
14
M12 x1
3
1 2
4
5
Connection technology
165
Scale drawings / drawing no. – CAD download: www.ifm.com
25
15,5
M12x1 36,5
26,5
14 3
1 2
4
26
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
Connection technology
166Product selectors and further information can be found at: www.ifm.com
Connection technology
167
ifm – worldwideaddresses
168
Argentinaifm electronic s.r.l.Manuela Sáenz 3235º piso, oficina 3C1107BPA – Puerto MaderoBuenos Aires, ArgentinaTel. (011) 5353-3436Fax (011) 5353-3436Interior [email protected]/ar
Australiaifm efector pty ltd.P.O. Box 4084Suite 3, 745 Springvale RoadMulgrave VIC 3170Tel. 1300 365 088Fax 1300 365 [email protected]
Austriaifm electronic gmbhWienerbergstraße 41Gebäude E1120 ViennaTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/at
BangladeshSensotec AutomationRed Crescent Chamber87, Motijheel CommercialAreaDhaka 1000BangladeshTel. +880 171 546 [email protected]
BelarusDEPOSIT INVESTJoint-Stock CompanyBlock 2, 27 Zheleznodorovhnaya street220089 MinskRepublic of BelarusTel. +375-17-270 75 06Fax +375-17-270 75 [email protected]
Belgium andLuxembourgifm electronic n.v./s.a.Zuiderlaan 911731 ZellikTel. +32 2 481 0220Fax +32 2 463 [email protected]/be
BoliviaBAVARIA S.R.L.Álvaro Baptista VargasZona Morocollo, Urb. Santos PariamoC. Mario Diaz de medina (26-A), Nr. 32La Paz - BoliviaTel.: 00-591-2-277 13 78Mobile: 00-591-720-47 [email protected]
Brazilifm electronic Ltda.Rua Eleonora Cintra, 140Jardim Analia Franco03337-000 Sāo Paulo/SPTel. +55-11-2672-1730Fax [email protected]/br
Bulgariaifm electronic eood1202 Sofiaul. Klokotnica No. 2ABusiness Centre IVELfl.4, office 17Tel. +359 2 807 59 69Fax +359 2 807 59 [email protected]
Canadaifm efector Canada Inc. 700 Dorval Drive /Corporate CentreOakville; L6K3V3 OntarioTel. +1-800-441-8246 Fax [email protected]
ChileElectronica IndustrialSchädler y Cia. Ltda.Av. Antonio Varas 1871Providencia6641545 SantiagoTel. +56 / 2 / 274 74 30Fax +56 / 2 / 204 93 [email protected]
Chinaifm electronic (Shanghai) Co., LtdBuilding 15, No 912Bi Bo Road, Pu Dong DistrictShanghai 201210, ChinaTel. +86-21-50278559 Fax +86-21-50278669Fax [email protected] www.ifm.com/cnifm electronic (HK) LtdUnit 2106, 21/F, Tower 2, MetroplazaNo. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong.Tel. +852 3528-0462Fax +852 [email protected]/hkifm electronic (Taiwan) Limited2C, Bao-Cheng Enterprise Tower,No. 6 Mincyuan Second Road,Cianjhen District, Kaohsiung City,Postal Code 806, Taiwan,R.O.C.Tel. +886-7-335-7778Fax [email protected]/tw
ColumbiaSENSOMATIC Y CIA LTDA.CALLE 1 C 25a - 50BOGOTA D.C. COLOMBIATel. +57 313 430 2264Tel. +57 1 407 96 [email protected]
Croatiaifm electronic gmbhWienerbergstr. 41Gebäude EA-1120 WienTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/hr
Czech Republicifm electronic spol.s.r.o.U Křížku 571252 43 PragueTel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 [email protected]/cz
Denmarkifm electronic a/sRingager 4A, 1.sal tv.2605 BrøndbyTel. +45 70 20 11 08Fax +45 70 20 11 [email protected]/dk
Dominican RepublicWECH AUTOCONTROLES S. A.Ave. Romulo Betancourt 2158 Edificio WechUrb. RenacimientoSanto DomingoDominican RepublicTel.: + 1 809-531-0550Fax: + 1 [email protected]
EcuadorINSELEC CIA. LTDA.Av. de los AruposE1-202 y Pan. Norte- Km 5 ½QuitoTel. +593 2 28074- 76 - 78Fax +593 2 [email protected]
EgyptEgyptian Establishment forElectromechanical SuppliesMr. Ahmed Gouda27 Al-Salam StreetAl Arezona, Al Haram RoadGiza 12111, CairoTel. +20 / 2 / 586 49 49Fax +20 / 2 / 586 49 49Mobile +20 10 10 61 [email protected]
EstoniaPesmel Estonia LTDSegu 476505 SaueEstoniaTel.: +372 674 73 30 Fax: +372 674 73 [email protected]
Finlandifm electronic oyVaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 [email protected]/fi
Franceifm electronicSiège :Savoie Technolac BP22673374 Le Bourget du LacAgence commerciale :Immeuble Uranus1-3 rue Jean Richepin93192 NOISY LE GRANDCEDEXTél: 0820 22 30 01Fax: 0820 22 22 [email protected]/fr
Germanyifm electronic gmbhFriedrichstr. 145128 EssenTel. +49 201 24 22 0Fax +49 201 24 22 12 [email protected]/de
Greeceifm electronic monoprosopi E.P.E.27, Andrea Papandreou Street15125 AmaroussiGreeceTel. +30 210 61 800 90Fax +30 210 61 994 [email protected]/gr
HondurasR y D INDUSTRIALBo. Paz Barahona11 Ave. 14 y 15 CalleS.O. #142San Pedro SulaTel. +504 5503703Fax +504 [email protected]
Hungaryifm electronic kft.Szent Imre út 59. I.em.H-9028 GyőrTel. +36-96 / 518-397Fax +36-96 / [email protected]/hu
Indiaifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 [email protected]/in
IndonesiaPT Indoserako SejahteraJl. P. Jayakarta 121 No. 5910730 Jakarta PusatTel. +62 / 21 6 24 8923Fax +62 / 21 6 24 [email protected]
Irelandifm electronic (Ireland) Ltd.No. 7, The CourtyardKilcarbery Business ParkNew Nangor RoadClondalkinDublin 22Tel. +353 / 1 / 413 60 66Fax +353 / 1 / 457 38 [email protected]/ie
IsraelAstragal Ltd.3, Hashikma Str.Azur 58001P.O. Box 99Azur 58190Tel. +972 / 3 / 5 59 16 60Fax +972 / 3 / 5 59 23 [email protected]
Italyifm electronicCentro Direzionale ColleoniPalazzo Andromeda 2Via Paracelo n° 1820041 Agrate Brianza (Milano)Tel. +39 / 039 68 99 982Fax +39 / 039 68 99 [email protected]/it
Japanefector co. ltd.Chiba Higashi Techno Green Park2-9-20 OkayamadaiTogane-shi, Chiba 283-0826Tel. +81 / 475 50 3003Fax +81 / 475 50 [email protected]/jp
JordanAl Mashreqan Trading SuppliesP.O.Box.85105411185 SwaifiehAmman - Jordan.Tel. +962 6 581 8841Fax +962 6 581 [email protected]
ifm – worldwideaddresses
169
Koreaifm electronic Ltd.2F Hyundai Liberty House #201Hannam-Dong 258,Yongsan-Gu,Seoul, KoreaTel. +82 2-790-5610Fax +82 [email protected]/kr
LatviaEC SystemsKatlakalna Str. 4A1073 RigaLatviaTel.: +371 724 1231Fax: +371 724 [email protected]
LebanonMiddle East DevelopmentCo. SAL (MEDEVCO)Medevco Building Jeita Main Road Jeita - Kesrouan LebanonMail address :P.O.Box 67 Jounieh LebanonTel. +961-9-233550 Fax +961-9-233554 [email protected]
LithuaniaElinta UABTerminalo g. 3, Biruliškių k.,Karmėlavos sen.LT-54469 Kauno raj. (Kauno LEZ)LithuaniaTel.: +370 37 351 999Fax: +370 37 452 [email protected]
Malaysiaifm electronic Pte. LtdMalaysian Branch OfficeNo. 2-4-2, Fourth FloorTower 2 @ PFCC, Jalan Puteri 1/2Bandar Puteri Puchong,47100 Puchong, SelangorTel. +603 - 8063 9522Fax +603 - 8063 [email protected] electronicAsia Regional Office21, Jalan KemuntingTaman Kebun The80250 Johor BahruJohor, West MalaysiaTel. +607 - 332 5022Fax +607 - 332 [email protected]
Mexicoifm efector S. de R.L. de C.V.Anillo Periférico, 1816-1Col. Hacienda San JerónimoMonterrey, N.L.Mexico 64630Tel. +52-81-8040-3535Fax +52-81-8040-2343www.ifmefector.mx
Netherlandsifm electronic b.v.Deventerweg 1 E3843 GA HarderwijkTel. +31 / 341 438 438Fax +31 / 341 438 [email protected]/nl
New Zealandifm efector pty ltd.Unit B, 20 Cain RoadPenrose, AucklandTel. +64 / 95 79 69 91Fax +64 / 95 79 92 [email protected]/nz
NigeriaAutomated Process Ltd3rd Floor, 32 Lagos AbeokutaExpresswayNear Cement Bus StopDopemu, AgegeLagos State, NigeriaTel. + 234 / 01 / 4729 967Fax + 234 /01 / 4925 [email protected]
NorwaySiv.Ing. J.F.Knudtzen ASBillingstadsletta 971396 BillingstadPostboks 1601378 NesbruTel. +47 / 66 98 33 50Fax +47 / 66 98 09 [email protected]
OmanTechnical Engineering Company LLC.P.O. Box 59 Madinat Al Sultan QaboosPostal Code 115 Sultanate of OmanTel. +968 24503593Fax +968 [email protected]
PakistanAB AutomationShop No.2. Rubab ChamberM.A. Jinnah RoadOff Sarai RoadKarachiTel. +92 / 21 / 2412 278Fax +92 / 21 / 2422 [email protected]
Perudekatec s.a.c.Los Calderos 188Urb. Vulcano, AteLima / PeruTel. +511 / 348 0293Tel. +511 / 348 0458Tel. +511 / 348 2269Fax +511 / 349 [email protected]
PhilippinesGram Industrial, Inc.Unit 201 Common GoalTowerFinance cor., Industry St.,Madrigal Business Park AyalaAlabangMuntinlupa City 1770Telephone: 632-8502218/8508496Fax: 632-8077173 / [email protected]
Polandifm electronic Sp.z o.o.ul. Kosciuszki 175PL 40-524 KatowiceTel. +48 / 32 / 60 87 454Fax +48 / 32 / 60 87 [email protected]/pl
Portugalifm electronic –Sucursal em PortugalAvenida da Republica 25034430-208 Vila Nova de GaiaTel. +351 / 22 / 37 17 108Fax +351 / 22 / 37 17 [email protected]/pt
Romaniaifm electronic s.r.l.Str. Cristian Nr. 5550073 SibiuTel.: 0040 269 224550Fax: 0040 269 [email protected]
Russiaifm electronicIbragimova, 31, k.50office 607105318 MoscowTel.: +7 (495) 921-44-14Fax: +7 (495) [email protected]/ru
Saudi ArabiaNoor Al-Shomoe for Electric & MaintenanceKing Khalid Street, Cross 5P.O. Box 2571Al-Khobar 31952Kingdom of Saudi ArabiaTel. +9 663 864 49 58Fax +9 663 894 63 [email protected]
Singaporeifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 [email protected]/sg
Slovakiaifm electronic spol. s.r.o.Rybnicna 40831 06 BratislavaTel. +421 / 2 / 44 87 23 29Fax +421 / 2 / 44 64 60 [email protected]/sk
South Africaifm electronic (pty) LtdShorrok HouseRoute 21 Corporate ParkNellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279Private bag X8Elardus Park0047Tel. +27 (0) 861 IFM RSA /436 772Fax +27(0)12 450 [email protected]/za
Spainifm electronic s.l.Edificio Prima Muntadas AParc Mas BlauC/Berguedà 108820 El Prat de LlobregatTel. +34 / 93 / 479 30 80Fax +34 / 93 / 479 30 [email protected]/es
Swedenifm electronic abHallavägen 10 512 60 Överlida Office Gothenburg:Drakegatan 641250 GothenburgTel. +46 / 325 / 66 15 00 Tel. +46 / 325 / 66 15 50Fax +46 / 325 / 66 15 [email protected]/se
Switzerlandifm electronic agAltgraben 274624 HärkingenTel. +41 / 62 / 388 80 30Fax +41 / 62 / 388 80 [email protected]/ch
SyriaI.E.C. Industrial Engineering CenterP.O. Box 15 Sehnaya, DamascusSyriaTel. + 963 11 532 13 19Fax. + 963 11 442 12 [email protected]
ThailandSang Chai Meter Co., Ltd.694/16-19 Phaholyothin RoadSamsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051Fax +66 / 2 / 616 [email protected]
Turkeyifm electronic Elektrikli ve Elektronik Aletlerİth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbulTel. +90 / 212 / 210 5080Fax +90 / 212 / 221 [email protected]/tr
Ukrainaifm electronicMariny Raskovoj 1102660 KievUkraineTel. +380 44 501 8543Fax +380 44 501 [email protected]/ua
United Arab EmiratesNoor Al-Shomoe Electrical Equipments Est.P.O. Box: 64052Warehouse No: 27A6 Street, Al Quoz Industrial 1Al Quoz, DubaiUnited Arab EmiratesTel. +9714 3403918Fax +9714 3403819Mobile +971 [email protected] Arab Emirates –Abu DhabiAl Injazat Technical Trading ServicesP.O. Box 42895Abu DhabiUnited Arab EmiratesTel. +971 2 622 6030Fax +971 2 622 [email protected]
United Kingdomifm electronic Ltd.efector HouseKingsway Business ParkOldfield RoadHamptonMiddlesex TW12 2HDTel. +44 / 20 / 8213 0000Fax +44 / 20 / 8213 [email protected]/uk
USAifm efector, inc.782 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 [email protected]
VenezuelaPetrobornas, C.A.Calle Pricipal, Centro Comercial Astur, Nivel PB, Local 05, Sector Matanzas, UD-321,Puerto Ordaz - Estado BolivarVenezuela Tel. +58 286-994 3406Tel. +58 286-718 1123 Fax +58 286-994 3406Fax +58 286-994 [email protected]
VietnamThien Viet Electrical Serviceand Trading Co., Ltd.784 Dien Bien Phu Str.Ward 11, Dist. 10Ho-Chi-Minh-City, Viet NamTel. +84 / 8 / 830 9916 Fax +84 / 8 / 830 [email protected]
www.ifm.com