qualifications have been validated …...qpl-23053-3 specification designation manufacturer’s...

SUPPLEMENTAL INFORMATION SHEET FOR QPL SAE AS23053

1 of 79

QPL-AS23053-3

5 September 2019

SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST

OF

PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD

SAE AS23053

INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE

This list has been prepared for use by or for the Government in the acquisition of products

covered by the subject non-Government standard and such listing of a product is not intended to

and does not connote endorsement of the product by the Department of Defense. All products

listed herein have been qualified under the requirements for the product as specified in the latest

adopted issue of the applicable non-Government standard. This list is subject to change without

notice; revision or amendment of this list will be issued as necessary. The listing of a product

does not release the manufacturer from compliance with the non-Government standard

requirements.

The activity responsible for this qualified products list and for qualification approval is the

Naval Air Systems Command, AIR-4.4.5.3, 48298 Shaw Rd., Building 1461, Patuxent River,

Maryland 20670-1900. Manufacturer’s full name, cage number, office and plant addresses are

listed at the end of this QPL.

THIS DOCUMENT IS AN OFFICIAL SUPPLEMENTAL INFORMATION SHEET OF THE

PRODUCTS TRANSFORMED TO AN EQUIVALENT QUALIFICATION DATA SET

(QDS). USERS OF THIS DOCUMENT MUST VISIT THE QUALIFIED PRODUCTS

DATABASE (QPD) TO VERIFY QUALIFICATION INFORMATION. PLEASE VISIT

HTTP://ASSIST.DAPS.DLA.MIL/ONLINE/START/ TO ACCESS INFORMATION. YOU

MUST HAVE A USERNAME AND PASSWORD TO ENTER SITE. ONCE LOGGED IN

CHOOSE “QPD” FROM THE SIDE MENU. YOU CAN SEARCH BY QPL NUMBER,

DOCUMENT NUMBER, GOVERNING SPEC, TITLE, FSC, GOVERNMENT

DESIGNATION, NON-GOVERNMENT (NGS) DESIGNATION, MANUFACTURER

DESIGNATION, OR SOURCE NAME.

QUALIFICATIONS HAVE BEEN VALIDATED

(Frequency: 3 Years)

BY VERIFICATION TESTING

http://assist.daps.dla.mil/online/start/

QPL-23053-3

2 of 79

TABLE OF CONTENTS

AS23053/1 .......................................................................................................................... 3

AS23053/4 ........................................................................................................................ 10

AS23053/5 ........................................................................................................................ 20

AS23053/6 ........................................................................................................................ 45

AS23053/8 ........................................................................................................................ 46

AS23053/10 ...................................................................................................................... 50

AS23053/11 ...................................................................................................................... 51

AS23053/12 ...................................................................................................................... 53

AS23053/13 ...................................................................................................................... 59

AS23053/15 ...................................................................................................................... 64

AS23053/16 ...................................................................................................................... 68

AS23053/18 ...................................................................................................................... 71

Manufacturer’s full name, cage number, office and plant addresses ................................ 76

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION

MANUFACTURER’S NAME

AND QUALIFICATION

TEST REFERENCE

3 of 79

SAE-AS23053/1, INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE,

CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE

M23053/1-101-0 80-6110-7310-9 L & 7100025031 L 3M Company

M23053/1-102-0 80-6110-7311-7 L & 7100022434 L 11146003.AA/06-19-2018

M23053/1-103-0 80-6110-7324-0 L & 7100025019 L

M23053/1-104-0 80-6114-5465-5 L & 7100022435 L

M23053/1-105-0 80-6114-5466-3 L & 7100022436 L

M23053/1-106-0 80-6114-5467-1 L & 7100022437 L

M23053/1-107-0 80-6114-5468-9 L & 7100025030 L

M23053/1-201-0 80-6106-7556-5 L & 7100062644 L

M23053/1-202-0 80-6106-7557-3 L & 7100025829 L

M23053/1-203-0 80-6106-7558-1 L & 7100025895 L

M23053/1-204-0 80-6106-7559-9 L & 7100079469 L

M23053/1-205-0 80-6106-7542-5 L & 7100025897 L

M23053/1-206-0 80-6106-7560-7 L & 7010396625 L

M23053/1-207-0 80-6106-7561-5 L & 7010350094 L

M23053/1-208-0 80-6106-7562-3 L & 7100025894 L

M23053/1-209-0 80-6106-7563-1 L & 7100025890 L

M23053/1-210-0 80-6106-7564-9 L & 7100084393 L

M23053/1-211-0 80-6106-7565-6 L & 7010350095 L

M23053/1-212-0 80-6106-7566-4 L & 7010297620 L

L = VARIOUS LENGTHS AND SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

4 of 79

M23053/1-101-0 FIT-600 1/4" Alpha Wire Company – Japan

M23053/1-102-0 FIT-600 3/8" 11145803.AA/06-19-18

M23053/1-103-0 FIT-600 1/2"

M23053/1-104-0 FIT-600 5/8"

M23053/1-105-0 FIT-600 3/4"

M23053/1-106-0 FIT-600 7/8"

M23053/1-107-0 FIT-600 1"

M23053/1-108-0 FIT-600 1 1/4"

M23053/1-109-0 FIT-600 1 1/2"

M23053/1-110-0 FIT-600 1 3/4"

M23053/1-111-0 FIT-600 2"

M23053/1-112-0 FIT-600 3"

M23053/1-113-0 FIT-600 4"

M23053/1-201-0 FIT-600 1/4"

M23053/1-202-0 FIT-600 3/8"

M23053/1-203-0 FIT-600 1/2"

M23053/1-204-0 FIT-600 5/8"

M23053/1-205-0 FIT-600 3/4"

M23053/1-206-0 FIT-600 7/8"

M23053/1-207-0 FIT-600 1"

M23053/1-208-0 FIT-600 1 1/4"

M23053/1-209-0 FIT-600 1 1/2"

M23053/1-210-0 FIT-600 1 3/4"

M23053/1-211-0 FIT-600 2"

M23053/1-212-0 FIT-600 3"

M23053/1-213-0 FIT-600 4"

M23053/1-201-0 DUNBAR CRFR-1/4”-0 or DUNBAR QPL™-NPT-1/4”-0 Dunbar Products LLC

M23053/1-202-0 DUNBAR CRFR-3/8”-0 or DUNBAR QPL™-NPT-3/8”-0 11148103.AA/06-19-18

M23053/1-203-0 DUNBAR CRFR-1/2”-0 or DUNBAR QPL™-NPT-1/2”-0




M23053/1-207-0 DUNBAR CRFR-1”-0 or DUNBAR QPL™-NPT-1”-0

M23053/1-208-0 DUNBAR CRFR-1-1/4”-0 or DUNBAR QPL™-NPT-1-1/4”-0

M23053/1-209-0 DUNBAR CRFR-1-1/2”-0 or DUNBAR QPL™-NPT-1-1/2”-0

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

5 of 79

M23053/1-101-0 NHS 1/4" black Grayline LLC

M23053/1-102-0 NHS 3/8" black 11145903.AA/06-19-18

M23053/1-103-0 NHS 1/2" black

M23053/1-104-0 NHS 5/8" black

M23053/1-105-0 NHS 3/4" black

M23053/1-106-0 NHS 7/8" black

M23053/1-107-0 NHS 1" black

M23053/1-108-0 NHS 1 1/4" black

M23053/1-109-0 NHS 1 1/2" black

M23053/1-110-0 NHS 1 3/4" black

M23053/1-111-0 NHS 2" black

M23053/1-112-0 NHS 3" black

M23053/1-113-0 NHS 4" black

M23053/1-201-0 NHS 1/4" black

M23053/1-202-0 NHS 3/8" black

M23053/1-203-0 NHS 1/2" black

M23053/1-204-0 NHS 5/8" black

M23053/1-205-0 NHS 3/4" black

M23053/1-206-0 NHS 7/8" black

M23053/1-207-0 NHS 1" black

M23053/1-208-0 NHS 1 1/4" black

M23053/1-209-0 NHS 1 1/2" black

M23053/1-210-0 NHS 1 3/4" black

M23053/1-211-0 NHS 2" black

M23053/1-212-0 NHS 3" black

M23053/1-213-0 NHS 4" black

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

6 of 79

M23053/1-101-0 HSN-100 1/4" black Insultab, Inc.

M23053/1-102-0 HSN-100 3/8" black 11145503.AA/06-19-2018

M23053/1-103-0 HSN-100 1/2" black

M23053/1-104-0 HSN-100 5/8" black

M23053/1-105-0 HSN-100 3/4" black

M23053/1-106-0 HSN-100 7/8" black

M23053/1-107-0 HSN-100 1" black

M23053/1-108-0 HSN-100 1 1/4" black

M23053/1-109-0 HSN-100 1 1/2" black

M23053/1-110-0 HSN-100 1 3/4" black

M23053/1-111-0 HSN-100 2" black

M23053/1-112-0 HSN-100 3" black

M23053/1-113-0 HSN-100 4" black

M23053/1-201-0 HSN-100 1/4" black

M23053/1-202-0 HSN-100 3/8" black

M23053/1-203-0 HSN-100 1/2" black

M23053/1-204-0 HSN-100 5/8" black

M23053/1-205-0 HSN-100 3/4" black

M23053/1-206-0 HSN-100 7/8" black

M23053/1-207-0 HSN-100 1" black

M23053/1-208-0 HSN-100 1 1/4" black

M23053/1-209-0 HSN-100 1 1/2" black

M23053/1-210-0 HSN-100 1 3/4" black

M23053/1-211-0 HSN-100 2" black

M23053/1-212-0 HSN-100 3" black

M23053/1-213-0 HSN-100 4" black

M23053/1-201-0 HSTTN25 Panduit Corporation

M23053/1-202-0 HSTTN38 11117203.AA/07-09-2019

M23053/1-203-0 HSTTN50

M23053/1-204-0 HSTTN63

M23053/1-205-0 HSTTN75

M23053/1-206-0 HSTTN88

M23053/1-207-0 HSTTN100

M23053/1-208-0 HSTTN125

M23053/1-209-0 HSTTN150

M23053/1-210-0 HSTTN175

M23053/1-211-0 HSTTN200

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

7 of 79

M23053/1-201-0 LG-CRFR-1/4”-0 LS Cable & System

M23053/1-202-0 LG-CRFR-3/8”-0 11144903.AA/06-19-18

M23053/1-203-0 LG-CRFR-1/2”-0

M23053/1-204-0 LG-CRFR-5/8”-0

M23053/1-205-0 LG-CRFR-3/4”-0

M23053/1-206-0 LG-CRFR-7/8”-0

M23053/1-207-0 LG-CRFR-1”-0

M23053/1-208-0 LG-CRFR-1-1/4”-0

M23053/1-209-0 LG-CRFR-1-1/2”-0

M23053/1-101-0 Sumitube R10 1/4" black Sumitomo Electric – Japan

M23053/1-102-0 Sumitube R10 3/8" black 11148303.AA/02-01-19

M23053/1-103-0 Sumitube R10 1/2" black




M23053/1-107-0 Sumitube R10 1" black

M23053/1-108-0 Sumitube R10 1 1/4" black






M23053/1-101-0 Sumitube R 1/4" black






M23053/1-107-0 Sumitube R 1" black

M23053/1-108-0 Sumitube R 1 1/4" black






QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

8 of 79

MARKER SLEEVE

CONTINUOUS TUBING FOR

SUMIMARK PRINTERS Sumitomo Electric – Japan

M23053/1-101-0 Sumimark SM3-16 1/4" black 11148303.AA/02-01-19

M23053/1-102-0 Sumimark SM3-16 3/8" black





M23053/1-107-0 Sumimark SM3-16 1" black

M23053/1-108-0 Sumimark SM3-16 1 1/4" black






























QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

9 of 79

MARKER SLEEVE



M23053/1-201-0 Sumimark SM3-16 1/4" black 11148303.AA/02-01-19











M23053/1-101-0 NT-MIL-1/4-0-L TE Connectivity- CA

M23053/1-102-0 NT-MIL-3/8-0-L 11120203.AA/06-19-18

M23053/1-103-0 NT-MIL-1/2-0-L

M23053/1-104-0 NT-MIL-5/8-0-L

M23053/1-105-0 NT-MIL-3/4-0-L

M23053/1-106-0 NT-MIL-7/8-0-L

M23053/1-107-0 NT-MIL-1-0-L

M23053/1-108-0 NT-MIL-1-1/4-0-L

M23053/1-109-0 NT-MIL-1-1/2-0-L

M23053/1-110-0 NT-MIL-1-3/4-0-L

M23053/1-111-0 NT-MIL-2-0-L

M23053/1-112-0 NT-MIL-3-0-L

M23053/1-113-0 NT-MIL-4-0-L

M23053/1-201-0 NT-MIL-1/4-0-L

M23053/1-202-0 NT-MIL-3/8-0-L

M23053/1-203-0 NT-MIL-1/2-0-L

M23053/1-204-0 NT-MIL-5/8-0-L

M23053/1-205-0 NT-MIL-3/4-0-L

M23053/1-206-0 NT-MIL-7/8-0-L

M23053/1-207-0 NT-MIL-1-0-L

M23053/1-208-0 NT-MIL-1-1/4-0-L

M23053/1-209-0 NT-MIL-1-1/2-0-L

M23053/1-210-0 NT-MIL-1-3/4-0-L

M23053/1-211-0 NT-MIL-2-0-L

M23053/1-212-0 NT-MIL-3-0-L

M23053/1-213-0 NT-MIL-4-0-L

L = STK FOR 4 FOOT LENGTH

SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

10 of 79


POLYOLEFIN, DUAL-WALL, OUTER WALL CROSSLINKED

M23053/4-101-* 80-6114-7373-9 * L & 7010349873 * L 3M Company

M23053/4-102-* 80-6103-2412-3 * L & 7010320184 * L 11146003.AA/06-19-2018

M23053/4-103-* 80-6106-4637-6 * L & 7010396590 * L

M23053/4-104-* 80-6102-5885-9 * L & 7010320078 * L

M23053/4-105-* 80-6102-4584-9 * L & 7010305540 * L

M23053/4-106-* 80-6102-4588-0 * L & 7010398106 * L

M23053/4-107-* 80-6102-4592-2 * L & 7010349774 * L

M23053/4-108-* 80-6109-5810-2 * L & 7010397034 * L

M23053/4-201-* 80-6106-4548-5 * L & 7010349965 * L

M23053/4-202-* 80-6106-4549-3 * L & 7010305588 * L

M23053/4-203-* 80-6106-4550-1 * L & 7010396580 * L

M23053/4-204-* 80-6106-4551-9 * L & 7010349966 * L

M23053/4-205-* 80-6106-4552-7 * L & 7010396581 * L

M23053/4-206-* 80-6106-4553-5 * L & 7010319140 * L

* = COLOR SEE AS23053 L = VARIOUS LENGTHS AND SPOOLS

4’ LENGTHS ONLY Alpha Wire Company

M23053/4-201-* FIT-750 1/4" 11145803.AA/06-19-18

M23053/4-202-* FIT-750 3/8"

M23053/4-203-* FIT-750 1/2"

M23053/4-204-* FIT-750 3/4"

M23053/4-302-* FIT-321 1/4”

M23053/4-303-* FIT-321 1/2”

* = COLOR SEE AS23053

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

11 of 79

4’ LENGTHS ONLY Alpha Wire Company

M23053/4-101-* FIT-300 1/8" 11145803.AA/06-19-18

M23053/4-102-* FIT-300 3/16"

M23053/4-103-* FIT-300 1/4"

M23053/4-104-* FIT-300 3/8"

M23053/4-105-* FIT-300 1/2"

M23053/4-106-* FIT-300 3/4"

M23053/4-107-* FIT-300 1"

M23053/4-201-* FIT-750 1/4"

M23053/4-202-* FIT-750 3/8"

M23053/4-203-* FIT-750 1/2"

M23053/4-204-* FIT-750 3/4"

M23053/4-205-* FIT-750 1"

M23053/4-206-* FIT-750 1 1/2"

M23053/4-301-* FIT-321 1/8"

M23053/4-302-* FIT-321 1/4"

M23053/4-303-* FIT-321 1/2"

M23053/4-304-* FIT-321 1"

M23053/4-305-* FIT-321 1 1/2"

M23053/4-301-* FIT-321 1/8"

M23053/4-302-* FIT-321 1/4"

M23053/4-303-* FIT-321 1/2"

M23053/4-304-* FIT-321 1"

M23053/4-305-* FIT-321 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

12 of 79

M23053/4-101-* DUNBAR 3625WS-1/8”-* or DUNBAR QPL™-321AS-1/8”-* Dunbar Products LLC

M23053/4-102-* DUNBAR 3625WS-3/16”-* or DUNBAR QPL™-321AS-3/16”-* 11148103.AA/06-19-18

M23053/4-103-* DUNBAR 3625WS-1/4”-* or DUNBAR QPL™-321AS-1/4”-*




M23053/4-107-* DUNBAR 3625WS-1”-* or DUNBAR QPL™-321AS-1”-*

M23053/4-108-* DUNBAR 3625WS-0.3”-* or DUNBAR QPL™-321AS-0.3”-*

M23053/4-201-* DUNBAR 1625W-1/4”-* or DUNBAR QPL™-221A-1/4”-*




M23053/4-205-* DUNBAR 1625W-1”-* or DUNBAR QPL™-221A-1”-*

M23053/4-206-* DUNBAR 1625W-1-1/2”-* or DUNBAR QPL™-221A-1-1/2”-*




M23053/4-304-* DUNBAR 3635W-1”-* or DUNBAR QPL™-321A-1”-*

M23053/4-305-* DUNBAR 3635W-1-1/2”-* or DUNBAR QPL™-321A-1-1/2”-*

* = COLOR * = COLOR SEE AS23053

SEE AS23053

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

13 of 79

4’ LENGTHS ONLY Grayline LLC

M23053/4-201-* AL2X 1/4" 11145903.AA/06-19-18

M23053/4-202-* AL2X 3/8"

M23053/4-203-* AL2X 1/2"

M23053/4-204-* AL2X 3/4"


4’ LENGTHS ONLY Grayline LLC

M23053/4-101-* ML251 1/8" 11145903.AA/06-19-18

M23053/4-102-* ML251 3/16""

M23053/4-103-* ML251 1/4"

M23053/4-104-* ML251 3/8"

M23053/4-105-* ML251 1/2"

M23053/4-106-* ML251 3/4"

M23053/4-107-* ML251 1"

M23053/4-201-* AL2X 1/4"

M23053/4-202-* AL2X 3/8"

M23053/4-203-* AL2X 1/2"

M23053/4-204-* AL2X 3/4"

M23053/4-205-* AL2X 1"

M23053/4-206-* AL2X 1 1/2"

M23053/4-301-* AL3X 1/8"

M23053/4-302-* AL3X 1/4"

M23053/4-303-* AL3X 1/2"

M23053/4-304-* AL3X 1"

M23053/4-305-* AL3X 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

14 of 79

4’ LENGTHS ONLY Insultab, Inc.

M23053/4-201-* HS-101-MW-2:1 1/4" 11145503.AA/06-19-2018

M23053/4-202-* HS-101-MW-2:1 3/8"

M23053/4-203-* HS-101-MW-2:1 1/2"

M23053/4-204-* HS-101-MW-2:1 3/4"

M23053/4-302-* HS-101-MW-3:1 1/4”

M23053/4-303-* HS-101-MW-3:1 1/2”


4’ LENGTHS ONLY Insultab, Inc.

M23053/4-101-* HS-101-MW 1/8" 11145503.AA/06-19-2018

M23053/4-102-* HS-101-MW 3/16""

M23053/4-103-* HS-101-MW 1/4"

M23053/4-104-* HS-101-MW 3/8"

M23053/4-105-* HS-101-MW 1/2"

M23053/4-106-* HS-101-MW 3/4"

M23053/4-107-* HS-101-MW 1"

M23053/4-201-* HS-101-MW-2:1 1/4"

M23053/4-202-* HS-101-MW-2:1 3/8"

M23053/4-203-* HS-101-MW-2:1 1/2"

M23053/4-204-* HS-101-MW-2:1 3/4"

M23053/4-205-* HS-101-MW-2:1 1"

M23053/4-206-* HS-101-MW-2:1 1 1/2"

M23053/4-301-* HS-101-MW-3:1 1/8"

M23053/4-302-* HS-101-MW-3:1 1/4"

M23053/4-303-* HS-101-MW-3:1 1/2"

M23053/4-304-* HS-101-MW-3:1 1"

M23053/4-305-* HS-101-MW-3:1 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

15 of 79

M23053/4-101-* GSHS-3625WS-1/8”-* LS Cable & System

M23053/4-102-* GSHS-3625WS-3/16”-* 11144903.AA/06-19-18

M23053/4-103-* GSHS-3625WS-1/4”-*

M23053/4-104-* GSHS-3625WS-3/8”-*

M23053/4-105-* GSHS-3625WS-1/2”-*

M23053/4-106-* GSHS-3625WS-3/4”-*

M23053/4-107-* GSHS-3625WS-1”-*

M23053/4-108-* GSHS-3625WS-0.3”-*

M23053/4-201-* GSHS-1625W-1/4”-*

M23053/4-202-* GSHS-1625W-3/8”-*

M23053/4-203-* GSHS-1625W-1/2”-*

M23053/4-204-* GSHS-1625W-3/4”-*

M23053/4-205-* GSHS-1625W-1”-*

M23053/4-206-* GSHS-1625W-1-1/2”-*

M23053/4-301-* GSHS-3635W-1/8”-*

M23053/4-302-* GSHS-3635W-1/4”-*

M23053/4-303-* GSHS-3635W-1/2”-*

M23053/4-304-* GSHS-3635W-1”-*

M23053/4-305-* GSHS-3635W-1-1/2”-*

* = COLOR SEE AS23053 * = COLOR SEE AS23053

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

16 of 79

BULK TUBING (SPOOLED) Sumitomo Electric

M23053/4-201-* Sumitube O2B2S 1/4" 11122703.AA/06-19-18

M23053/4-202-* Sumitube O2B2S 3/8"

M23053/4-203-* Sumitube O2B2S 1/2"

M23053/4-204-* Sumitube O2B2S 3/4"

4’ LENGTHS ONLY

M23053/4-201-* Sumitube O2B2 1/4"

M23053/4-202-* Sumitube O2B2 3/8"

M23053/4-203-* Sumitube O2B2 1/2"

M23053/4-204-* Sumitube O2B2 3/4"

**MARKER SLEEVE TUBING

FOR SUMIMARK PRINTERS

M23053/4-201-* Sumimark SM3-24-1/4"

M23053/4-202-* Sumimark SM3-24-3/8"

M23053/4-203-* Sumimark SM3-24-1/2"

M23053/4-204-* Sumimark SM3-24-3/4"

BULK TUBING (SPOOLED)

M23053/4-302-* Sumitube W3B2S 1/4"

M23053/4-303-* Sumitube W3B2S 1/2"

**MARKER SLEEVE TUBING

FOR SUMIMARK PRINTERS

M23053/4-302-* Sumimark SM3-25-1/4"

M23053/4-303-* Sumimark SM3-25-1/2"

* = COLOR SEE AS23053 ** SUMIMARK TUBING

AVAILABLE ON SPOOLS

ONLY.

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

17 of 79

M23053/4-301-* Sumitube W3B2 1/8"(3/1) Sumitomo Electric - Germany

M23053/4-302-* Sumitube W3B2 1/4"(6/2) 11148403.AA/02-01-19

M23053/4-303-* Sumitube W3B2 1/2"(12/4)


M23053/4-101-* Sumitube W5DL 1/8" Sumitomo Electric – Japan

M23053/4-102-* Sumitube W5DL 3/16"" 11148303.AA/02-01-19

M23053/4-103-* Sumitube W5DL 1/4"

M23053/4-104-* Sumitube W5DL 3/8"

M23053/4-105-* Sumitube W5DL 1/2"

M23053/4-106-* Sumitube W5DL 3/4"

M23053/4-107-* Sumitube W5DL 1"

M23053/4-108-* Sumitube W5DL 300/050/100

M23053/4-201-* Sumitube O2B2 1/4"

M23053/4-202-* Sumitube O2B2 3/8"

M23053/4-203-* Sumitube O2B2 1/2"

M23053/4-204-* Sumitube O2B2 3/4"

M23053/4-205-* Sumitube O2B2 1"

M23053/4-206-* Sumitube O2B2 1 1/2"

M23053/4-201-* Sumitube O2B2S 1/4"

M23053/4-202-* Sumitube O2B2S 3/8"

M23053/4-203-* Sumitube O2B2S 1/2"

M23053/4-204-* Sumitube O2B2S 3/4"

M23053/4-205-* Sumitube O2B2S 1"

M23053/4-206-* Sumitube O2B2S 1 1/2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

18 of 79

MARKER SLEEVE



M23053/4-201-* Sumimark SM3-24 1/4" 11148303.AA/02-01-19

M23053/4-202-* Sumimark SM3-24 3/8" (continued)

M23053/4-203-* Sumimark SM3-24 1/2"

M23053/4-204-* Sumimark SM3-24 3/4"

M23053/4-205-* Sumimark SM3-24 1"

M23053/4-206-* Sumimark SM3-24 1 1/2"

M23053/4-301-* Sumitube W3B2 1/8" (3/1)

M23053/4-302-* Sumitube W3B2 1/4" (6/2)

M23053/4-303-* Sumitube W3B2 1/2" (12/4)

M23053/4-304-* Sumitube W3B2 1" (24/8)

M23053/4-305-* Sumitube W3B2 1 1/2" (40/13)

M23053/4-301-* Sumitube W3B2S 1/8" (3/1)

M23053/4-302-* Sumitube W3B2S 1/4" (6/2)

M23053/4-303-* Sumitube W3B2S 1/2" (12/4)

M23053/4-304-* Sumitube W3B2S 1" (24/8)

M23053/4-305-* Sumitube W3B2S 1 1/2" (40/13)

MARKER SLEEVE


SUMIMARK PRINTERS

M23053/4-301-* Sumimark SM3-25 1/8" (3/1)

M23053/4-302-* Sumimark SM3-25 1/4" (6/2)

M23053/4-303-* Sumimark SM3-25 1/2" (12/4)

M23053/4-304-* Sumimark SM3-25 1" (24/8)

M23053/4-305-* Sumimark SM3-25 1 1/2" (40/13)

M23053/4-301-* Sumitube W3B2(4X) 4/1

M23053/4-302-* Sumitube W3B2(4X) 8/2

M23053/4-303-* Sumitube W3B2(4X) 16/4

M23053/4-304-* Sumitube W3B2(4X) 24/6

M23053/4-305-* Sumitube W3B2(4X) 32/8

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

19 of 79

M23053/4-101-* SCL-1/8-*-L TE Connectivity- CA

M23053/4-102-* SCL-3/16-*-L 11120203.AA/06-19-18

M23053/4-103-* SCL-1/4-*-L

M23053/4-104-* SCL-3/8-*-L

M23053/4-105-* SCL-1/2-*-L

M23053/4-106-* SCL-3/4-*-L

M23053/4-107-* SCL-1-*-L

M23053/4-108-* SCL-300-*-L

M23053/4-201-* TAT-125-1/4-*-L

M23053/4-202-* TAT-125-3/8-*-L

M23053/4-203-* TAT-125-1/2-*-L

M23053/4-204-* TAT-125-3/4-*-L

M23053/4-205-* TAT-125-1-*-L

M23053/4-206-* TAT-125-1-1/2-*-L

M23053/4-301-* ATUM-3/1-*-MS-L

M23053/4-302-* ATUM-6/2-*-MS-L

M23053/4-303-* ATUM-12/4-*-MS-L

M23053/4-304-* ATUM-24/8-*-MS-L

M23053/4-305-* ATUM-40/13-*-MS-L

* = COLOR SEE AS23053 * = COLOR


SP FOR SPOOLS

M23053/4-201-* TAT-125-1/4-*-L TE Connectivity- Czech Republic

M23053/4-202-* TAT-125-3/8-*-L 11120203.AD/06-19-18

M23053/4-203-* TAT-125-1/2-*-L

M23053/4-204-* TAT-125-3/4-*-L

M23053/4-205-* TAT-125-1-*-L

M23053/4-206-* TAT-125-1-1/2-*-L



SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

20 of 79


POLYOLEFIN, FLEXIBLE, CROSSLINKED

M23053/5-101-* 80-6102-1926-5 * L & 7100042117 * L 3M Company

M23053/5-102-* 80-6102-2724-3 * L & 7010290772 * L 11146003.AA/06-19-2018

M23053/5-103-* 80-6102-2726-8 * L & 7010396241 * L

M23053/5-104-* 80-6102-2729-2 * L & 7010349752 * L

M23053/5-105-* 80-6102-2733-4 * L & 7010396242 * L

M23053/5-106-* 80-6102-2736-7 * L & 7010320061 * L

M23053/5-107-* 80-6102-1959-6 * L & 7100020270 * L

M23053/5-108-* 80-6102-1964-6 * L & 7100024898 * L

M23053/5-109-* 80-6102-2752-4 * L & 7100077869 * L

M23053/5-110-* 80-6102-1976-0 * L & 7100026209 * L

M23053/5-111-* 80-0002-0138-6 * L & 7010318524 * L

M23053/5-112-* 80-6102-1985-1 * L & 7100025150 * L

M23053/5-113-* 80-6102-1989-3 * L & 7100025151 * L

M23053/5-114-* 80-6102-4018-8 * L & 7100029942 * L

M23053/5-201-C 80-6102-1991-9 L & 7010320057 L

M23053/5-202-C 80-6102-1992-7 L & 7100025158 L

M23053/5-203-C 80-6102-1993-5 L & 7100020132 L

M23053/5-204-C 80-6102-1994-3 L & 7100020161 L

M23053/5-205-C 80-6102-1995-0 L & 7010396233 L

M23053/5-206-C 80-6114-7239-2 L & 7000133496 L

M23053/5-207-C 80-6102-1997-6 L & 7100020273 L

M23053/5-208-C 80-6102-1998-4 L & 7100024932 L

M23053/5-209-C 80-6102-1999-2 L & 7100020274 L

M23053/5-210-C 80-6102-2000-8 L & 7100019710 L

M23053/5-211-C 80-6102-2001-6 L & 7100025155 L

M23053/5-212-C 80-6102-2002-4 L & 7100026347 L

M23053/5-213-C 80-6102-4116-0 L & 7100025152 L

M23053/5-214-C 80-6102-4120-2 L & 7100083169 L

M23053/5-301-* 80-6106-4504-8 * L & 7010398499 * L

M23053/5-302-* 80-6102-1930-7 * L & 7010320049 * L

M23053/5-303-* 80-6102-1935-6 * L & 7010396208 * L

M23053/5-304-* 80-6102-1941-4 * L & 7010297587 * L

M23053/5-305-* 80-6102-1947-1 * L & 7010349733 * L

M23053/5-306-* 80-6103-3558-2 * L & 7010320185 * L

M23053/5-307-* 80-6102-1960-4 * L & 7100025735 * L

M23053/5-308-* 80-6103-3559-0 * L & 7100024102 * L

M23053/5-309-* 80-6102-1971-1 * L & 7010396223 * L

M23053/5-310-* 80-6102-1977-8 * L & 7010320055 * L

M23053/5-311-* 80-6102-3984-2 * L & 7010396264 * L

* = COLOR SEE AS23053 L = VARIOUS LENGTHS AND SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

21 of 79

TUBING (Spooled, 4 ft. lengths or bulk) Alpha Wire Company

M23053/5-101-* FIT-221, FIT-221V or FIT-221B 3/64” 11145803.AA/06-19-18

M23053/5-102-* FIT-221, FIT-221V or FIT-221B 1/16”

M23053/5-103-* FIT-221, FIT-221V orFIT-221B 3/32”

M23053/5-104-* FIT-221, FIT-221V or FIT-221B 1/8”

M23053/5-105-* FIT-221, FIT-221V or FIT-221B 3/16”

M23053/5-106-* FIT-221, FIT-221V or FIT-221B 1/4”

M23053/5-107-* FIT-221, FIT-221V or FIT-221B 3/8”

M23053/5-108-* FIT-221, FIT-221V or FIT-221B 1/2”

M23053/5-109-* FIT-221, FIT-221V or FIT-221B 3/4”

M23053/5-203-C FIT-221 3/32"

M23053/5-204-C FIT-221 1/8"

M23053/5-205-C FIT-221 3/16"

M23053/5-206-C FIT-221 1/4"

M23053/5-207-C FIT-221 3/8"

M23053/5-208-C FIT-221 1/2"

M23053/5-301-* FIT-221, FIT-221V or FIT-221B 3/64”

M23053/5-302-* FIT-221, FIT-221V or FIT-221B 1/16”

M23053/5-303-* FIT-221, FIT-221V or FIT-221B 3/32”

M23053/5-304-* FIT-221, FIT-221V or FIT-221B 1/8”

M23053/5-305-* FIT-221, FIT-221V or FIT-221B 3/16”

M23053/5-306-* FIT-221, FIT-221V or FIT-221B 1/4”

M23053/5-307-* FIT-221, FIT-221V or FIT-221B 3/8”

M23053/5-308-* FIT-221, FIT-221V or FIT-221B 1/2”

M23053/5-309-* FIT-221, FIT-221V or FIT-221B 3/4”


TUBING

(Spooled, 4 ft. lengths or bulk) Alpha Wire Company

M23053/5-101-* FIT-221, FIT-221V or FIT-221B 3/64" 11145803.AA/06-19-18

M23053/5-102-* FIT-221, FIT-221V or FIT-221B 1/16"

M23053/5-103-* FIT-221, FIT-221V or FIT-221B 3/32"

M23053/5-104-* FIT-221, FIT-221V or FIT-221B 1/8"

M23053/5-105-* FIT-221, FIT-221V or FIT-221B 3/16"

M23053/5-106-* FIT-221, FIT-221V or FIT-221B 1/4"

M23053/5-107-* FIT-221, FIT-221V or FIT-221B 3/8"

M23053/5-108-* FIT-221, FIT-221V or FIT-221B 1/2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

22 of 79

M23053/5-109-* FIT-221, FIT-221V or FIT-221B 3/4" Alpha Wire Company

M23053/5-110-* FIT-221, FIT-221V or FIT-221B 1" 11145803.AA/06-19-18

M23053/5-111-* FIT-221, FIT-221V or FIT-221B 1 1/2" (continued)

M23053/5-112-* FIT-221, FIT-221V or FIT-221B 2"

M23053/5-113-* FIT-221, FIT-221V or FIT-221B 3"

M23053/5-114-* FIT-221, FIT-221V or FIT-221B 4"

M23053/5-115-* FIT-421 1"

M23053/5-116-* FIT-421 2"

M23053/5-117-* FIT-421 3"

M23053/5-121-* FIT-421 3"

M23053/5-201-C FIT-221, FIT-221B 3/64"

M23053/5-202-C FIT-221, FIT-221B 1/16"

M23053/5-203-C FIT-221, FIT-221B 3/32"

M23053/5-204-C FIT-221, FIT-221B 1/8"

M23053/5-205-C FIT-221, FIT-221B 3/16"

M23053/5-206-C FIT-221, FIT-221B 1/4"

M23053/5-207-C FIT-221, FIT-221B 3/8"

M23053/5-208-C FIT-221, FIT-221B 1/2"

M23053/5-209-C FIT-221, FIT-221B 3/4"

M23053/5-210-C FIT-221, FIT-221B 1"

M23053/5-211-C FIT-221, FIT-221B 1 1/2"

M23053/5-212-C FIT-221, FIT-221B 2"

M23053/5-213-C FIT-221, FITB-221 3"

M23053/5-214-C FIT-221, FIT-221B 4"

M23053/5-301-* FIT-221, FIT-221V or FIT-221B 3/64"

M23053/5-302-* FIT-221, FIT-221V or FIT-221B 1/16"

M23053/5-303-* FIT-221, FIT-221V or FIT-221B 3/32"

M23053/5-304-* FIT-221, FIT-221V or FIT-221B 1/8"

M23053/5-305-* FIT-221, FIT-221V or FIT-221B 3/16"

M23053/5-306-* FIT-221, FIT-221V or FIT-221B 1/4"

M23053/5-307-* FIT-221, FIT-221V or FIT-221B 3/8"

M23053/5-308-* FIT-221, FIT-221V or FIT-221B 1/2"

M23053/5-309-* FIT-221, FIT-221V or FIT-221B 3/4"

M23053/5-310-* FIT-221, FIT-221V or FIT-221B 1"

M23053/5-311-* FIT-221, FIT-221V or FIT-221B 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

23 of 79

M23053/5-103-* HX-C-094-* Brady Worldwide

M23053/5-104-* HX-C-125-* 11146103.AA/02-01-19

M23053/5-105-* HX-C-187-*

M23053/5-106-* HX-C-250-*

M23053/5-107-* HX-C-375-*

M23053/5-108-* HX-C-500-*

M23053/5-109-* HX-C-750-*

M23053/5-303-* HX-C-094-*

M23053/5-304-* HX-C-125-*

M23053/5-305-* HX-C-187-*

M23053/5-306-* HX-C-250-*

M23053/5-307-* HX-C-375-*

M23053/5-308-* HX-C-500-*

M23053/5-309-* HX-C-750-*


M23053/5-104-* CNB-1635F-1/8”-* CNB-Tek

M23053/5-105-* CNB-1635F-3/16”-* 11146303.AA/06-19-2018

M23053/5-106-* CNB-1635F-1/4”-*

M23053/5-107-* CNB-1635F-3/8”-*

M23053/5-108-* CNB-1635F-1/2”-*

M23053/5-109-* CNB-1635F-3/4”-*

M23053/5-110-* CNB-1635F-1”-*

M23053/5-111-* CNB-1635F-1-1/2”-*

M23053/5-304-* CNB-1635F-1/8”-*

M23053/5-305-* CNB-1635F-3/16”-*

M23053/5-306-* CNB-1635F-1/4”-*

M23053/5-307-* CNB-1635F-3/8”-*

M23053/5-308-* CNB-1635F-1/2”-*

M23053/5-309-* CNB-1635F-3/4”-*

M23053/5-310-* CNB-1635F-1”-*

M23053/5-311-* CNB-1635F-1-1/2”-*


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

24 of 79

M23053/5-101-* DUNBAR 1635F-3/64”-* or DUNBAR QPL™-221-3/64”-* Dunbar Products LLC

M23053/5-102-* DUNBAR 1635F-1/16”-* or DUNBAR QPL™-221-1/16”-* 11148103.AA/06-19-18

M23053/5-103-* DUNBAR 1635F-3/32”-* or DUNBAR QPL™-221-3/32”-*







M23053/5-110-* DUNBAR 1635F-1”-* or DUNBAR QPL™-221-1”-*

M23053/5-111-* DUNBAR 1635F-1-1/2”-* or DUNBAR QPL™-221-1-1/2”-*




M23053/5-201-C DUNBAR 1635F-3/64”-C or DUNBAR QPL™-221-3/64”-C









M23053/5-210-C DUNBAR 1635F-1”-C or DUNBAR QPL™-221-1”-C

M23053/5-211-C DUNBAR 1635F-1-1/2”-C or DUNBAR QPL™-221-1-1/2”-C














M23053/5-311-* DUNBAR 1635F-1-1/2”-* or DUNBAR QPL™-221-1-1/2”-*


SEE AS23053

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

25 of 79

TUBING (Spooled or 4 ft. lengths) Grayline LLC

M23053/5-101-* SL2535 3/64” 11145903.AA/06-19-18

M23053/5-102-* SL2535 1/16”

M23053/5-103-* SL2535 3/32”

M23053/5-104-* SL2535 1/8”

M23053/5-105-* SL2535 3/16”

M23053/5-106-* SL2535 1/4”

M23053/5-107-* SL2535 3/8”

M23053/5-108-* SL2535 1/2”

M23053/5-109-* SL2535 3/4”

M23053/5-203-C SL2535CL 3/32”

M23053/5-204-C SL2535CL 1/8”

M23053/5-205-C SL2535CL 3/16”

M23053/5-206-C SL2535CL 1/4”

M23053/5-207-C SL2535CL 3/8”

M23053/5-208-C SL2535CL 1/2”

M23053/5-301-* SL125 3/64”

M23053/5-302-* SL125 1/16”

M23053/5-303-* SL125 3/32”

M23053/5-304-* SL125 1/8”

M23053/5-305-* SL125 3/16”

M23053/5-306-* SL125 1/4”

M23053/5-307-* SL125 3/8”

M23053/5-308-* SL125 1/2”

M23053/5-309-* SL125 3/4”


TUBING (Spooled or 4 ft. lengths) Grayline LLC

M23053/5-101-* SL2535 3/64" 11145903.AA/06-19-18

M23053/5-102-* SL2535 1/16"

M23053/5-103-* SL2535 3/32"

M23053/5-104-* SL2535 1/8"

M23053/5-105-* SL2535 3/16"

M23053/5-106-* SL2535 1/4"

M23053/5-107-* SL2535 3/8"

M23053/5-108-* SL2535 1/2"

M23053/5-109-* SL2535 3/4"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

26 of 79

M23053/5-110-* SL2535 1" Grayline LLC

M23053/5-111-* SL2535 1 1/2" 11145903.AA/06-19-18

M23053/5-112-* SL2535 2" (continued)

M23053/5-113-* SL2535 3"

M23053/5-114-* SL2535 4"

M23053/5-201-C SL2535CL 3/64"

M23053/5-202-C SL2535CL 1/16"

M23053/5-203-C SL2535CL 3/32"

M23053/5-204-C SL2535CL 1/8"

M23053/5-205-C SL2535CL 3/16"

M23053/5-206-C SL2535CL 1/4"

M23053/5-207-C SL2535CL 3/8"

M23053/5-208-C SL2535CL 1/2"

M23053/5-209-C SL2535CL 3/4"

M23053/5-210-C SL2535CL 1"

M23053/5-211-C SL2535CL 1 1/2"

M23053/5-212-C SL2535CL 2"

M23053/5-213-C SL2535CL 3"

M23053/5-214-C SL2535CL 4"

M23053/5-301-* SL125 or SL2535 3/64"

M23053/5-302-* SL125 or SL2535 1/16"

M23053/5-303-* SL125 or SL2535 3/32"

M23053/5-304-* SL125 or SL2535 1/8"

M23053/5-305-* SL125 or SL2535 3/16"

M23053/5-306-* SL125 or SL2535 1/4"

M23053/5-307-* SL125 or SL2535 3/8"

M23053/5-308-* SL125 or SL2535 1/2"

M23053/5-309-* SL125 or SL2535 3/4"

M23053/5-310-* SL125 or SL2535 1"

M23053/5-311-* SL125 or SL2535 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

27 of 79

TUBING (Spooled) Insultab, Inc.

M23053/5-101-* HS-101 3/64” 11145503.AA/06-19-2018

M23053/5-102-* HS-101 1/16”

M23053/5-103-* HS-101 3/32”

M23053/5-104-* HS-101 1/8”

M23053/5-105-* HS-101 3/16”

M23053/5-106-* HS-101 1/4”

M23053/5-107-* HS-101 3/8”

M23053/5-108-* HS-101 1/2”

M23053/5-109-* HS-101 3/4”

TUBING (Spooled or 4 ft. lengths)

M23053/5-203-C HS-101 3/32”

M23053/5-204-C HS-101 1/8”

M23053/5-205-C HS-101 3/16”

M23053/5-206-C HS-101 1/4”

M23053/5-207-C HS-101 3/8”

M23053/5-208-C HS-101 1/2”

M23053/5-301-* HS-101 3/64”

M23053/5-302-* HS-101 1/16”

M23053/5-303-* HS-101 3/32”

M23053/5-304-* HS-101 1/8”

M23053/5-305-* HS-101 3/16”

M23053/5-306-* HS-101 1/4”

M23053/5-307-* HS-101 3/8”

M23053/5-308-* HS-101 1/2”

M23053/5-309-* HS-101 3/4”


TUBING (Spooled) Insultab, Inc.

M23053/5-101-* HS-101 3/64" 11145503.AA/06-19-2018

M23053/5-102-* HS-101 1/16"

M23053/5-103-* HS-101 3/32"

M23053/5-104-* HS-101 1/8"

M23053/5-105-* HS-101 3/16"

M23053/5-106-* HS-101 1/4"

M23053/5-107-* HS-101 3/8"

M23053/5-108-* HS-101 1/2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

28 of 79

M23053/5-109-* HS-101 3/4" Insultab, Inc.

M23053/5-110-* HS-101 1" 11145503.AA/06-19-2018

M23053/5-111-* HS-101 1 1/2" (continued)

M23053/5-112-* HS-101 2"

M23053/5-113-* HS-101 3"

M23053/5-114-* HS-101 4"

M23053/5-201-C HS-101 3/64"

M23053/5-202-C HS-101 1/16"

M23053/5-203-C HS-101 3/32"

M23053/5-204-C HS-101 1/8"

M23053/5-205-C HS-101 3/16"

M23053/5-206-C HS-101 1/4"

M23053/5-207-C HS-101 3/8"

M23053/5-208-C HS-101 1/2"

M23053/5-209-C HS-101 3/4"

M23053/5-210-C HS-101 1"

M23053/5-211-C HS-101 1 1/2"

M23053/5-212-C HS-101 2"

M23053/5-213-C HS-101 3"

M23053/5-214-C HS-101 4"

M23053/5-301-* HS-101 3/64"

M23053/5-302-* HS-101 1/16"

M23053/5-303-* HS-101 3/32"

M23053/5-304-* HS-101 1/8"

M23053/5-305-* HS-101 3/16" M23053/5-306-* HS-101 1/4" M23053/5-307-* HS-101 3/8" M23053/5-308-* HS-101 1/2" M23053/5-309-* HS-101 3/4" M23053/5-310-* HS-101 1"

M23053/5-311-* HS-101 1 1/2"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

29 of 79

M23053/5-101-* GSHS-1635F-3/64-* LS Cable & System

M23053/5-102-* GSHS-1635F-1/16-* 11144903.AA/06-19-18

M23053/5-103-* GSHS-1635F-3/32-*

M23053/5-104-* GSHS-1635F-1/8-*

M23053/5-105-* GSHS-1635F-3/16-*

M23053/5-106-* GSHS-1635F-1/4-*

M23053/5-107-* GSHS-1635F-3/8-*

M23053/5-108-* GSHS-1635F-1/2-*

M23053/5-109-* GSHS-1635F-3/4-*

M23053/5-110-* GSHS-1635F-1-*

M23053/5-111-* GSHS-1635F-1-1/2-*

M23053/5-112-* GSHS-1635F-2-*

M23053/5-113-* GSHS-1635F-3-*

M23053/5-114-* GSHS-1635F-4-*

M23053/5-201-C GSHS-1635F-3/64-C

M23053/5-202-C GSHS-1635F-1/16-C

M23053/5-203-C GSHS-1635F-3/32-C

M23053/5-204-C GSHS-1635F-1/8-C

M23053/5-205-C GSHS-1635F-3/16-C

M23053/5-206-C GSHS-1635F-1/4-C

M23053/5-207-C GSHS-1635F-3/8-C

M23053/5-208-C GSHS-1635F-1/2-C

M23053/5-209-C GSHS-1635F-3/4-C

M23053/5-210-C GSHS-1635F-1-C

M23053/5-211-C GSHS-1635F-1-1/2-C

M23053/5-212-C GSHS-1635F-2-C

M23053/5-213-C GSHS-1635F-3-C

M23053/5-214-C GSHS-1635F-4-C

M23053/5-301-* GSHS-1635F-3/64-*

M23053/5-302-* GSHS-1635F-1/16-*

M23053/5-303-* GSHS-1635F-3/32-*

M23053/5-304-* GSHS-1635F-1/8-*

M23053/5-305-* GSHS-1635F-3/16-*

M23053/5-306-* GSHS-1635F-1/4-*

M23053/5-307-* GSHS-1635F-3/8-*

M23053/5-308-* GSHS-1635F-1/2-*

M23053/5-309-* GSHS-1635F-3/4-*

M23053/5-310-* GSHS-1635F-1-*

M23053/5-311-* GSHS-1635F-1-1/2-*


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

30 of 79


M23053/5-101-* Sumitube B2 3/64” 11122703.AA/06-19-18

M23053/5-102-* Sumitube B2 1/16”

M23053/5-103-* Sumitube B2 3/32”

M23053/5-104-* Sumitube B2 1/8”

M23053/5-105-* Sumitube B2 3/16”

M23053/5-106-* Sumitube B2 1/4”

M23053/5-107-* Sumitube B2 3/8”

M23053/5-108-* Sumitube B2 1/2”

M23053/5-109-* Sumitube B2 3/4”

MARKER SLEEVE CONTINUOUS

TUBING FOR SUMIMARK PRINTERS

M23053/5-101-* Sumimark SM3-12-3/64"

M23053/5-102-* Sumimark SM3-12 -1/16”

M23053/5-103-* Sumimark SM3-12 3/32”

M23053/5-104-* Sumimark SM3-12 1/8”

M23053/5-105-* Sumimark SM3-12 3/16”

M23053/5-106-* Sumimark SM3-12 1/4”

M23053/5-107-* Sumimark SM3-12 3/8”

M23053/5-108-* Sumimark SM3-12 1/2”

M23053/5-109-* Sumimark SM3-12 3/4”

**MARKER SLEEVE CONTINUOUS

TUBING FOR SUMITAG PRINTERS

M23053/5-101-* HPC-1/16-*-30M -SPL-2X

M23053/5-102-* HPC-3/32-*-30M -SPL-2X

M23053/5-103-* HPC-1/8-*-30M -SPL-2X

M23053/5-104-* HPC-3/16-*-30M -SPL-2X

M23053/5-105-* HPC-1/4-*-30M -SPL-2X

M23053/5-106-* HPC-3/8-*-30M -SPL-2X

M23053/5-107-* HPC-1/2-*-30M -SPL-2X

M23053/5-108-* HPC-3/4-*-30M -SPL-2X

M23053/5-109-* HPC-1/16-*-30M -SPL-2X

* = COLOR SEE AS23053 **SUMITAG HPC SERIES PRODUCTS

ARE SOLD AS 30 METER LENGTHS

ON SPOOLS ONLY.

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

31 of 79


M23053/5-203-C Sumitube A2 3/32” 11122703.AA/06-19-18

M23053/5-204-C Sumitube A2 1/8”

M23053/5-205-C Sumitube A2 3/16”

M23053/5-206-C Sumitube A2 1/4”

M23053/5-207-C Sumitube A2 3/8”

M23053/5-208-C Sumitube A2 1/2”


TUBING FOR SUMIMARK PRINTERS

M23053/5-202-C Sumimark SM3-13 -1/16”

M23053/5-203-C Sumimark SM3-13 3/32”

M23053/5-204-C Sumimark SM3-13 1/8”

M23053/5-205-C Sumimark SM3-13 3/16”

M23053/5-206-C Sumimark SM3-13 1/4”

M23053/5-207-C Sumimark SM3-13 3/8”

M23053/5-208-C Sumimark SM3-13 1/2”

M23053/5-209-C Sumimark SM3-13 3/4”

BULK TUBING (SPOOLED)

M23053/5-301-* Sumitube B2 3/64”

M23053/5-302-* Sumitube B2 1/16”

M23053/5-303-* Sumitube B2 3/32”

M23053/5-304-* Sumitube B2 1/8”

M23053/5-305-* Sumitube B2 3/16”

M23053/5-306-* Sumitube B2 1/4”

M23053/5-307-* Sumitube B2 3/8”

M23053/5-308-* Sumitube B2 1/2”

M23053/5-309-* Sumitube B2 3/4”


C = CLEAR

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

32 of 79

***MARKER SLEEVE CONTINUOUS Sumitomo Electric

TUBING FOR SUMIMARK PRINTERS 11122703.AA/06-19-18

M23053/5-301-* Sumimark SM3-12-3/64"

M23053/5-302-* Sumimark SM3-12 -1/16”

M23053/5-303-* Sumimark SM3-12 3/32”

M23053/5-304-* Sumimark SM3-12 1/8”

M23053/5-305-* Sumimark SM3-12 3/16”

M23053/5-306-* Sumimark SM3-12 1/4”

M23053/5-307-* Sumimark SM3-12 3/8”

M23053/5-308-* Sumimark SM3-12 1/2”

M23053/5-309-* Sumimark SM3-12 3/4”

**MARKER SLEEVE CONTINUOUS


M23053/5-302-* HPC-1/16-*-30M -SPL-2X

M23053/5-303-* HPC-3/32-*-30M -SPL-2X

M23053/5-304-* HPC-1/8-*-30M -SPL-2X

M23053/5-305-* HPC-3/16-*-30M -SPL-2X

M23053/5-306-* HPC-1/4-*-30M -SPL-2X

M23053/5-307-* HPC-3/8-*-30M -SPL-2X

M23053/5-308-* HPC-1/2-*-30M -SPL-2X

M23053/5-309-* HPC-3/4-*-30M -SPL-2X

* = COLOR SEE AS23053 **SUMITAG HPC SERIES PRODUCTS

ARE SOLD AS 30 METER LENGTHS

ON SPOOLS ONLY.

*** SUMIMARK TUBING

AVAILABLE ON SPOOLS ONLY.

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

33 of 79

M23053/5-101-* Sumitube B2 3/64” Sumitomo Electric - Germany

M23053/5-102-* Sumitube B2 1/16” 11148403.AA/02-01-19

M23053/5-103-* Sumitube B2 3/32”

M23053/5-104-* Sumitube B2 1/8”

M23053/5-105-* Sumitube B2 3/16”

M23053/5-106-* Sumitube B2 1/4”

M23053/5-107-* Sumitube B2 3/8”

M23053/5-108-* Sumitube B2 1/2”

M23053/5-109-* Sumitube B2 3/4”

M23053/5-110-* Sumitube B2 1”

M23053/5-101-* Sumitube B20 3/64”

M23053/5-102-* Sumitube B20 1/16”

M23053/5-103-* Sumitube B20 3/32”

M23053/5-104-* Sumitube B20 1/8”

M23053/5-105-* Sumitube B20 3/16”

M23053/5-106-* Sumitube B20 1/4”

M23053/5-107-* Sumitube B20 3/8”

M23053/5-108-* Sumitube B20 1/2”

M23053/5-109-* Sumitube B20 3/4”

M23053/5-110-* Sumitube B20 1”

M23053/5-301-* Sumitube B2 3/64”

M23053/5-302-* Sumitube B2 1/16”

M23053/5-303-* Sumitube B2 3/32”

M23053/5-304-* Sumitube B2 1/8”

M23053/5-305-* Sumitube B2 3/16”

M23053/5-306-* Sumitube B2 1/4”

M23053/5-307-* Sumitube B2 3/8”

M23053/5-308-* Sumitube B2 1/2”

M23053/5-309-* Sumitube B2 3/4”

M23053/5-310-* Sumitube B2 1”


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

34 of 79

M23053/5-101-* Sumitube B2 3/64" Sumitomo Electric – Japan

M23053/5-102-* Sumitube B2 1/16" 11148303.AA/02-01-19

M23053/5-103-* Sumitube B2 3/32"

M23053/5-104-* Sumitube B2 1/8"

M23053/5-105-* Sumitube B2 3/16"

M23053/5-106-* Sumitube B2 1/4"

M23053/5-107-* Sumitube B2 3/8"

M23053/5-108-* Sumitube B2 1/2"

M23053/5-109-* Sumitube B2 3/4"

M23053/5-110-* Sumitube B2 1"

M23053/5-111-* Sumitube B2 1 1/2"

M23053/5-112-* Sumitube B2 2"

M23053/5-113-* Sumitube B2 3"

M23053/5-114-* Sumitube B2 4"


TUBING FOR SUMIMARK

PRINTERS

M23053/5-101-* Sumimark SM3-12 3/64"

M23053/5-102-* Sumimark SM3-12 1/16"

M23053/5-103-* Sumimark SM3-12 3/32"

M23053/5-104-* Sumimark SM3-12 1/8"

M23053/5-105-* Sumimark SM3-12 3/16"

M23053/5-106-* Sumimark SM3-12 1/4"

M23053/5-107-* Sumimark SM3-12 3/8"

M23053/5-108-* Sumimark SM3-12 1/2"

M23053/5-109-* Sumimark SM3-12 3/4"

M23053/5-110-* Sumimark SM3-12 1"

M23053/5-111-* Sumimark SM3-12 1 1/2"

M23053/5-112-* Sumimark SM3-12 2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

35 of 79

M23053/5-101-* Sumitube B20 3/64" Sumitomo Electric – Japan

M23053/5-102-* Sumitube B20 1/16" 11148303.AA/02-01-19

M23053/5-103-* Sumitube B20 3/32" (Continued)

M23053/5-104-* Sumitube B20 1/8"

M23053/5-105-* Sumitube B20 3/16"

M23053/5-106-* Sumitube B20 1/4"

M23053/5-107-* Sumitube B20 3/8"

M23053/5-108-* Sumitube B20 1/2"

M23053/5-109-* Sumitube B20 3/4"

M23053/5-110-* Sumitube B20 1"

M23053/5-111-* Sumitube B20 1 1/2"

M23053/5-112-* Sumitube B20 2"

M23053/5-113-* Sumitube B20 3"

M23053/5-114-* Sumitube B20 4"


TUBING FOR SUMITAG PRINTERS inch / (metric sizes)

M23053/5-102-* HPC-1/16"-**-30M-SPL-2X / (HPC-016-

30M-**-2X)

M23053/5-103-* HPC- 3/32"-**-30M-SPL-2X / (HPC-

024-30M-**-2X)

M23053/5-104-* HPC-1/8"-**-30M-SPL-2X / (HPC-032-

30M-**-2X)

M23053/5-105-* HPC-3/16"-**-30M-SPL-2X / (HPC-048-

30M-**-2X)

M23053/5-106-* HPC-1/4"-**-30M-SPL-2X / (HPC-064-

30M-**-2X)

M23053/5-107-* HPC-3/8"-**-30M-SPL-2X / (HPC-095-

30M-**-2X)

M23053/5-108-* HPC-1/2"-**-30M-SPL-2X / (HPC-127-

30M-**-2X)

M23053/5-109-* HPC-3/4"-**-30M-SPL-2X / (HPC-191-

30M-**-2X)

M23053/5-110-* HPC-1"-**-20M-SPL-2X / (HPC-254-

20M-**-2X)

M23053/5-111-* HPC-1.5"-**-20M-SPL-2X / (HPC-381-

20M-**-2X)

M23053/5-112-* HPC-2"-**-15M-SPL-2X / (HPC-508-

15M-**-2X)

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

36 of 79


TUBING FOR SUMITAG PRINTERS Sumitomo Electric – Japan

M23053/5-102-* MIL-016-30M-**-2X 11148303.AA/02-01-19

M23053/5-103-* MIL-024-30M-**-2X (Continued)

M23053/5-104-* MIL-032-30M-**-2X

M23053/5-105-* MIL-048-30M-**-2X

M23053/5-106-* MIL-064-30M-**-2X

M23053/5-107-* MIL-095-30M-**-2X

M23053/5-108-* MIL-127-30M-**-2X

M23053/5-109-* MIL-191-30M-**-2X

M23053/5-110-* MIL-254-20M-**-2X

M23053/5-111-* MIL-381-20M-**-2X

M23053/5-112-* MIL-508-15M-**-2X

M23053/5-115-* Sumitube B2(4XC) 1"

M23053/5-116-* Sumitube B2(4XC) 2"

M23053/5-117-* Sumitube B2(4XC) 3"

M23053/5-119-* Sumitube B2(4XC) 1 1/2"

M23053/5-121-* Sumitube B2(4XC) 3"


TUBING FOR SUMIMARK

PRINTERS

M23053/5-115-* Sumimark SM3-41 1"

M23053/5-116-* Sumimark SM3-41 2"

M23053/5-119-* Sumimark SM3-41 1 1/2"

M23053/5-201-C Sumitube A2 3/64"

M23053/5-202-C Sumitube A2 1/16"

M23053/5-203-C Sumitube A2 3/32"

M23053/5-204-C Sumitube A2 1/8"

M23053/5-205-C Sumitube A2 3/16"

M23053/5-206-C Sumitube A2 1/4"

M23053/5-207-C Sumitube A2 3/8"

M23053/5-208-C Sumitube A2 1/2"

M23053/5-209-C Sumitube A2 3/4"

M23053/5-210-C Sumitube A2 1"

M23053/5-211-C Sumitube A2 1 1/2"

M23053/5-212-C Sumitube A2 2"

M23053/5-213-C Sumitube A2 3"

M23053/5-214-C Sumitube A2 4"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

37 of 79


TUBING FOR SUMIMARK

PRINTERS Sumitomo Electric – Japan

M23053/5-202-C Sumimark SM3-13 1/16" 11148303.AA/02-01-19

M23053/5-203-C Sumimark SM3-13 3/32" (Continued)

M23053/5-204-C Sumimark SM3-13 1/8"

M23053/5-205-C Sumimark SM3-13 3/16"

M23053/5-206-C Sumimark SM3-13 1/4"

M23053/5-207-C Sumimark SM3-13 3/8"

M23053/5-208-C Sumimark SM3-13 1/2"

M23053/5-209-C Sumimark SM3-13 3/4"

M23053/5-210-C Sumimark SM3-13 1"

M23053/5-211-C Sumimark SM3-13 1 1/2"



M23053/5-202-C MIL-016-30M-TR-2X

M23053/5-203-C MIL-024-30M-TR-2X

M23053/5-204-C MIL-032-30M-TR-2X

M23053/5-205-C MIL-048-30M-TR-2X

M23053/5-206-C MIL-064-30M-TR-2X

M23053/5-207-C MIL-095-30M-TR-2X

M23053/5-208-C MIL-127-30M-TR-2X

M23053/5-209-C MIL-191-30M-TR-2X

M23053/5-210-C MIL-254-20M-TR-2X

M23053/5-211-C MIL-381-20M-TR-2X

M23053/5-212-C MIL-508-15M-TR-2X

M23053/5-301-* Sumitube B2 3/64"

M23053/5-302-* Sumitube B2 1/16"

M23053/5-303-* Sumitube B2 3/32"

M23053/5-304-* Sumitube B2 1/8"

M23053/5-305-* Sumitube B2 3/16"

M23053/5-306-* Sumitube B2 1/4"

M23053/5-307-* Sumitube B2 3/8"

M23053/5-308-* Sumitube B2 1/2"

M23053/5-309-* Sumitube B2 3/4"

M23053/5-310-* Sumitube B2 1"

M23053/5-311-* Sumitube B2 1 1/2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

38 of 79


TUBING FOR SUMIMARK

PRINTERS Sumitomo Electric – Japan

M23053/5-301-* Sumimark SM3-12 3/64" 11148303.AA/02-01-19

M23053/5-302-* Sumimark SM3-12 1/16" (Continued)

M23053/5-303-* Sumimark SM3-12 3/32"

M23053/5-304-* Sumimark SM3-12 1/8"

M23053/5-305-* Sumimark SM3-12 3/16"

M23053/5-306-* Sumimark SM3-12 1/4"

M23053/5-307-* Sumimark SM3-12 3/8"

M23053/5-308-* Sumimark SM3-12 1/2"

M23053/5-309-* Sumimark SM3-12 3/4"

M23053/5-310-* Sumimark SM3-12 1"

M23053/5-311-* Sumimark SM3-12 1 1/2"



inch / (metric sizes)

M23053/5-302-* HPC-1/16"-**-30M-SPL-2X / (HPC-016-

30M-**-2X)

M23053/5-303-* HPC- 3/32"-**-30M-SPL-2X / (HPC-

024-30M-**-2X)

M23053/5-304-* HPC-1/8"-**-30M-SPL-2X / (HPC-032-

30M-**-2X)

M23053/5-305-* HPC-3/16"-**-30M-SPL-2X / (HPC-048-

30M-**-2X)

M23053/5-306-* HPC-1/4"-**-30M-SPL-2X / (HPC-064-

30M-**-2X)

M23053/5-307-* HPC-3/8"-**-30M-SPL-2X / (HPC-095-

30M-**-2X)

M23053/5-308-* HPC-1/2"-**-30M-SPL-2X / (HPC-127-

30M-**-2X)

M23053/5-309-* HPC-3/4"-**-30M-SPL-2X / (HPC-191-

30M-**-2X)

M23053/5-310-* HPC-1"-**-20M-SPL-2X /(HPC-254-

20M-**-2X)

M23053/5-311-* HPC-1.5"-**-20M-SPL-2X / (HPC-381-

20M-**-2X)

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

39 of 79


TUBING FOR SUMITAG PRINTERS Sumitomo Electric – Japan

M23053/5-302-* MIL-016-30M-**-2X 11148303.AA/02-01-19

M23053/5-303-* MIL-024-30M-**-2X (Continued)

M23053/5-304-* MIL-032-30M-**-2X

M23053/5-305-* MIL-048-30M-**-2X

M23053/5-306-* MIL-064-30M-**-2X

M23053/5-307-* MIL-095-30M-**-2X

M23053/5-308-* MIL-127-30M-**-2X

M23053/5-309-* MIL-191-30M-**-2X

M23053/5-310-* MIL-254-20M-**-2X

M23053/5-311-* MIL-381-20M-**-2X

M23053/5-312-* MIL-508-15M-**-2X

* = COLOR SEE AS23053 **color codes

SUMITAG PRODUCTS ARE SOLD AS 15 METER, 20METER LENGTHS ON SPOOL ONLY

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

40 of 79

M23053/5-101-* Sumitube B2 3/64” Sumi-Pac Corporation

M23053/5-102-* Sumitube B2 1/16” 11148703.AA/02-01-19

M23053/5-103-* Sumitube B2 3/32”

M23053/5-104-* Sumitube B2 1/8”

M23053/5-105-* Sumitube B2 3/16”

M23053/5-106-* Sumitube B2 1/4”

M23053/5-107-* Sumitube B2 3/8”

M23053/5-108-* Sumitube B2 1/2”

M23053/5-109-* Sumitube B2 3/4”

M23053/5-110-* Sumitube B2 1”

BULK TUBING

M23053/5-201-* Sumitube A2 3/64”

M23053/5-202-* Sumitube A2 1/16”

M23053/5-203-* Sumitube A2 3/32”

M23053/5-204-* Sumitube A2 1/8”

M23053/5-205-* Sumitube A2 3/16”

M23053/5-206-* Sumitube A2 1/4”

M23053/5-207-* Sumitube A2 3/8”

M23053/5-208-* Sumitube A2 1/2”

M23053/5-209-* Sumitube A2 3/4”

M23053/5-210-* Sumitube A2 1”

M23053/5-301-* Sumitube B2 3/64”

M23053/5-302-* Sumitube B2 1/16”

M23053/5-303-* Sumitube B2 3/32”

M23053/5-304-* Sumitube B2 1/8”

M23053/5-305-* Sumitube B2 3/16”

M23053/5-306-* Sumitube B2 1/4”

M23053/5-307-* Sumitube B2 3/8”

M23053/5-308-* Sumitube B2 1/2”

M23053/5-309-* Sumitube B2 3/4”

M23053/5-310-* Sumitube B2 1”


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

41 of 79

M23053/5-101-* RNF-100-3/64-*-L TE Connectivity- CA

M23053/5-102-* RNF-100-1/16-*-L 11120203.AA/06-19-18

M23053/5-103-* RNF-100-3/32-*-L

M23053/5-104-* RNF-100-1/8-*-L

M23053/5-105-* RNF-100-3/16-*-L

M23053/5-106-* RNF-100-1/4-*-L

M23053/5-107-* RNF-100-3/8-*-L

M23053/5-108-* RNF-100-1/2-*-L

M23053/5-109-* RNF-100-3/4-*-L

M23053/5-110-* RNF-100-1-*-L

M23053/5-111-* RNF-100-1-1/2-*-L

M23053/5-112-* RNF-100-2-*-L

M23053/5-113-* RNF-100-3-*-L

M23053/5-114-* RNF-100-4-*-L



SP FOR SPOOLS

M23053/5-101-* VERSAFIT-3/64-*-L

M23053/5-102-* VERSAFIT-1/16-*-L

M23053/5-103-* VERSAFIT-3/32-*-L

M23053/5-104-* VERSAFIT-1/8-*-L

M23053/5-105-* VERSAFIT-3/16-*-L

M23053/5-106-* VERSAFIT-1/4-*-L

M23053/5-107-* VERSAFIT-3/8-*-L

M23053/5-108-* VERSAFIT-1/2-*-L

M23053/5-109-* VERSAFIT-3/4-*-L

M23053/5-110-* VERSAFIT-1-*-L

M23053/5-111-* VERSAFIT-1-1/2-*-L

M23053/5-112-* VERSAFIT-2-*-L

M23053/5-113-* VERSAFIT-3-*-L

M23053/5-114-* VERSAFIT-4-*-L



SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

42 of 79

M23053/5-115-* RP-4800-NO. 1-*-L TE Connectivity- CA

M23053/5-116-* RP-4800-NO. 2-*-L 11120203.AA/06-19-18

M23053/5-117-* RP-4800-NO. 3-*-L

M23053/5-118-* RP-4800-NO. 4-*-L

M23053/5-119-* RP-4800-NO. 5-*-L

M23053/5-120-* RP-4800-NO. 6-*-L

M23053/5-121-* RP-4800-NO. 7-*-L

M23053/5-122-* RP-4800-NO. 8-*-L

M23053/5-123-* RP-4800-NO. 9-*-L

M23053/5-201-C RNF-100-3/64-CL-L

M23053/5-202-C RNF-100-1/16-CL-L

M23053/5-203-C RNF-100-3/32-CL-L

M23053/5-204-C RNF-100-1/8-CL-L

M23053/5-205-C RNF-100-3/16-CL-L

M23053/5-206-C RNF-100-1/4-CL-L

M23053/5-207-C RNF-100-3/8-CL-L

M23053/5-208-C RNF-100-1/2-CL-L

M23053/5-209-C RNF-100-3/4-CL-L

M23053/5-210-C RNF-100-1-CL-L

M23053/5-211-C RNF-100-1-1/2-CL-L

M23053/5-212-C RNF-100-2-CL-L

M23053/5-213-C RNF-100-3-CL-L

M23053/5-214-C RNF-100-4-CL-L

M23053/5-301-* VERSAFIT-3/64-*-L

M23053/5-302-* VERSAFIT-1/16-*-L

M23053/5-303-* VERSAFIT-3/32-*-L

M23053/5-304-* VERSAFIT-1/8-*-L

M23053/5-305-* VERSAFIT-3/16-*-L

M23053/5-306-* VERSAFIT-1/4-*-L

M23053/5-307-* VERSAFIT-3/8-*-L

M23053/5-308-* VERSAFIT-1/2-*-L

M23053/5-309-* VERSAFIT-3/4-*-L

M23053/5-310-* VERSAFIT-1-*-L

M23053/5-311-* VERSAFIT-1-1/2-*-L


C = CLEAR L = STK FOR 4 FOOT LENGTH

SP FOR SPOOLS

CL = CLEAR

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

43 of 79

M23053/5-101-* RNF-100-3/64-*-L TE Connectivity- Czech Republic

M23053/5-102-* RNF-100-1/16-*-L 11120203.AD/06-19-18

M23053/5-103-* RNF-100-3/32-*-L

M23053/5-104-* RNF-100-1/8-*-L

M23053/5-105-* RNF-100-3/16-*-L

M23053/5-106-* RNF-100-1/4-*-L

M23053/5-107-* RNF-100-3/8-*-L

M23053/5-108-* RNF-100-1/2-*-L

M23053/5-109-* RNF-100-3/4-*-L

M23053/5-110-* RNF-100-1-*-L

M23053/5-111-* RNF-100-1-1/2-*-L

M23053/5-112-* RNF-100-2-*-L

M23053/5-113-* RNF-100-3-*-L

M23053/5-114-* RNF-100-4-*-L



SP FOR SPOOLS

M23053/5-101-* VERSAFIT-3/64-*-L TE Connectivity- Czech Republic

M23053/5-102-* VERSAFIT-1/16-*-L 11120203.AD/06-19-18

M23053/5-103-* VERSAFIT-3/32-*-L

M23053/5-104-* VERSAFIT-1/8-*-L

M23053/5-105-* VERSAFIT-3/16-*-L

M23053/5-106-* VERSAFIT-1/4-*-L

M23053/5-107-* VERSAFIT-3/8-*-L

M23053/5-108-* VERSAFIT-1/2-*-L

M23053/5-109-* VERSAFIT-3/4-*-L

M23053/5-110-* VERSAFIT-1-*-L

M23053/5-111-* VERSAFIT-1-1/2-*-L

M23053/5-112-* VERSAFIT-2-*-L

M23053/5-113-* VERSAFIT-3-*-L

M23053/5-114-* VERSAFIT-4-*-L



SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

44 of 79

M23053/5-115-* RP-4800-NO. 1-*-L TE Connectivity- Czech Republic

M23053/5-116-* RP-4800-NO. 2-*-L 11120203.AD/06-19-18

M23053/5-117-* RP-4800-NO. 3-*-L

M23053/5-118-* RP-4800-NO. 4-*-L

M23053/5-119-* RP-4800-NO. 5-*-L

M23053/5-120-* RP-4800-NO. 6-*-L

M23053/5-121-* RP-4800-NO. 7-*-L

M23053/5-122-* RP-4800-NO. 8-*-L

M23053/5-123-* RP-4800-NO. 9-*-L

M23053/5-201-C RNF-100-3/64-CL-L

M23053/5-202-C RNF-100-1/16-CL-L

M23053/5-203-C RNF-100-3/32-CL-L

M23053/5-204-C RNF-100-1/8-CL-L

M23053/5-205-C RNF-100-3/16-CL-L

M23053/5-206-C RNF-100-1/4-CL-L

M23053/5-207-C RNF-100-3/8-CL-L

M23053/5-208-C RNF-100-1/2-CL-L

M23053/5-209-C RNF-100-3/4-CL-L

M23053/5-210-C RNF-100-1-CL-L

M23053/5-211-C RNF-100-1-1/2-CL-L

M23053/5-212-C RNF-100-2-CL-L

M23053/5-213-C RNF-100-3-CL-L

M23053/5-214-C RNF-100-4-CL-L

M23053/5-301-* VERSAFIT-3/64-*-L

M23053/5-302-* VERSAFIT-1/16-*-L

M23053/5-303-* VERSAFIT-3/32-*-L

M23053/5-304-* VERSAFIT-1/8-*-L

M23053/5-305-* VERSAFIT-3/16-*-L

M23053/5-306-* VERSAFIT-1/4-*-L

M23053/5-307-* VERSAFIT-3/8-*-L

M23053/5-308-* VERSAFIT-1/2-*-L

M23053/5-309-* VERSAFIT-3/4-*-L

M23053/5-310-* VERSAFIT-1-*-L

M23053/5-311-* VERSAFIT-1-1/2-*-L


C = CLEAR L = STK FOR 4 FOOT LENGTH

SP FOR SPOOLS

CL = CLEAR

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

45 of 79


POLYOLEFIN, SEMI-RIGID, CROSSLINKED

M23053/6-101-* CRN-3/64-MS-*-L TE Connectivity- CA

M23053/6-102-* CRN-1/16-MS-*-L 11120203.AA/06-19-18

M23053/6-103-* CRN-3/32-MS-*-L

M23053/6-104-* CRN-1/8-*-L

M23053/6-105-* CRN-3/16-*-L

M23053/6-106-* CRN-1/4-*-L

M23053/6-107-* CRN-3/8-*-L

M23053/6-108-* CRN-1/2-*-L

M23053/6-201-C CRN-3/64-X-L

M23053/6-202-C CRN-1/16-X-L

M23053/6-203-C CRN-3/32-X-L

M23053/6-204-C CRN-1/8-X-L

M23053/6-205-C CRN-3/16-X-L

M23053/6-206-C CRN-1/4-X-L

M23053/6-207-C CRN-3/8-X-L

M23053/6-208-C CRN-1/2-X-L

* = COLOR SEE AS23053 L = STK FOR 4 FOOT LENGTHS

C = CLEAR SP FOR SPOOLS

* = COLOR

X = CLEAR

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

46 of 79


POLYVINYLIDENE FLUORIDE, SEMIRIGID, CROSSLINKED

M23053/8-001-C 80-6102-4447-9 L & 7010396273 L 3M Company

M23053/8-002-C 80-6106-4541-0 L & 7010396478 L 11146003.AA/06-19-2018

M23053/8-003-C 80-6102-6115-0 L & 7010349890 L

M23053/8-004-C 80-6116-0189-1 L & 7000133620 L

M23053/8-005-C 80-6102-4466-9 L & 7010349772 L

M23053/8-006-C 80-6102-4472-7 L & 7010396274 L

M23053/8-007-C 80-6102-4479-2 L & 7010320071 L

M23053/8-008-C 80-6106-4735-8 L & 7010349976 L

M23053/8-009-C 80-6102-4486-7 L & 7010396275 L

M23053/8-010-C 80-6116-0066-1 L & 7010290998 L

C = CLEAR SEE AS23053 L = VARIOUS LENGTHS AND SPOOLS

M23053/8-001-C FIT-350 3/64” clear Alpha Wire Company

M23053/8-002-C FIT-350 1/16” clear 11145803.AA/06-19-18

M23053/8-003-C FIT-350 3/32” clear M23053/8-004-C FIT-350 1/8” clear

*M23053/8-005-C FIT-350 3/16” clear M23053/8-006-C FIT-350 1/4” clear M23053/8-007-C FIT-350 3/8” clear M23053/8-008-C FIT-350 1/2” clear M23053/8-009-C FIT-350 3/4” clear M23053/8-010-C FIT-350 1” clear

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

47 of 79

M23053/8-001-C DUNBAR 1675-3/64”-C or DUNBAR QPL™-175-3/64”-C Dunbar Products LLC

M23053/8-002-C DUNBAR 1675-1/16”-C or DUNBAR QPL™-175-1/16”-C 11148103.AA/06-19-18

M23053/8-003-C DUNBAR 1675-3/32”-C or DUNBAR QPL™-175-3/32”-C







M23053/8-010-C DUNBAR 1675-1”-C or DUNBAR QPL™-175-1”-C

M23053/8-011-C DUNBAR 1675-1-1/2”-C or DUNBAR QPL™-175-1-1/2”-C

C = CLEAR C = CLEAR SEE AS23053

SEE AS23053

M23053/8-001-C PVDF 3/64” clear Grayline LLC

M23053/8-002-C PVDF 1/16” clear 11145903.AA/06-19-18

M23053/8-003-C PVDF 3/32” clear

M23053/8-004-C PVDF 1/8” clear

*M23053/8-005-C PVDF 3/16” clear

M23053/8-006-C PVDF 1/4” clear

M23053/8-007-C PVDF 3/8” clear

M23053/8-008-C PVDF 1/2” clear

M23053/8-009-C PVDF 3/4” clear

M23053/8-010-C PVDF 1” clear

M23053/8-011-C PVDF 1 1/2” clear

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

48 of 79

M23053/8-001-C HSK-600 3/64” clear Insultab, Inc.

M23053/8-002-C HSK-600 1/16” clear 11145503.AA/06-19-2018

M23053/8-003-C HSK-600 3/32” clear

M23053/8-004-C HSK-600 1/8” clear

M23053/8-005-C HSK-600 3/16” clear

M23053/8-006-C HSK-600 1/4” clear

M23053/8-007-C HSK-600 3/8” clear

M23053/8-008-C HSK-600 1/2” clear

M23053/8-009-C HSK-600 3/4” clear

M23053/8-010-C HSK-600 1” clear

M23053/8-011-C HSK-600 1 1/2” clear

M23053/8-001-C GSHS-1675-3/64”-C LS Cable & System

M23053/8-002-C GSHS-1675-1/16”-C 11144903.AA/06-19-18

M23053/8-003-C GSHS-1675-3/32”-C

M23053/8-004-C GSHS-1675-1/8”-C

M23053/8-005-C GSHS-1675-3/16”-C

M23053/8-006-C GSHS-1675-1/4”-C

M23053/8-007-C GSHS-1675-3/8”-C

M23053/8-008-C GSHS-1675-1/2”-C

M23053/8-009-C GSHS-1675-3/4”-C

M23053/8-010-C GSHS-1675-1”-C

M23053/8-011-C GSHS-1675-1-1/2”-C

C = CLEAR SEE AS23053 C = CLEAR SEE AS23053

M23053/8-001-C Sumitube K 3/64” clear Sumitomo Electric – Japan

M23053/8-002-C Sumitube K 1/16” clear 11148303.AA/02-01-19

M23053/8-003-C Sumitube K 3/32” clear







M23053/8-010-C Sumitube K 1” clear

M23053/8-011-C Sumitube K 1 1/2” clear

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

49 of 79

M23053/8-001-C RW-175-3/64-X-L TE Connectivity- CA

M23053/8-002-C RW-175-1/16-X-L 11120203.AA/06-19-18

M23053/8-003-C RW-175-3/32-X-L

M23053/8-004-C RW-175-1/8-X-L

M23053/8-005-C RW-175-3/16-X-L

M23053/8-006-C RW-175-1/4-X-L

M23053/8-007-C RW-175-3/8-X-L

M23053/8-008-C RW-175-1/2-X-L

M23053/8-009-C RW-175-3/4-X-L

M23053/8-010-C RW-175-1-X-L

M23053/8-011-C RW-175-1-1/2-X-L

C = CLEAR SEE AS23053 L = STK FOR 4 FOOT LENGTHS

SP FOR SPOOLS

X = CLEAR

M23053/8-001-C RW-175-3/64-X-L TE Connectivity- Czech Republic

M23053/8-002-C RW-175-1/16-X-L 11120203.AD/06-19-18

M23053/8-003-C RW-175-3/32-X-L

M23053/8-004-C RW-175-1/8-X-L

M23053/8-005-C RW-175-3/16-X-L

M23053/8-006-C RW-175-1/4-X-L

M23053/8-007-C RW-175-3/8-X-L

M23053/8-008-C RW-175-1/2-X-L

M23053/8-009-C RW-175-3/4-X-L

M23053/8-010-C RW-175-1-X-L

M23053/8-011-C RW-175-1-1/2-X-L

C = CLEAR SEE AS23053 L = STK FOR 4 FOOT LENGTHS

SP FOR SPOOLS

X = CLEAR

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

50 of 79


SILICONE RUBBER, FLEXIBLE

M23053/10‐001‐0 SFR‐1/8‐0‐L TE Connectivity- CA

M23053/10‐002‐0 SFR‐1/4‐0‐L 11120203.AA/06-19-18

M23053/10‐003‐0 SFR‐3/8‐0‐L

M23053/10‐004‐0 SFR‐1/2‐0‐L

M23053/10‐005‐0 SFR‐5/8‐0‐L

M23053/10‐006‐0 SFR‐3/4‐0‐L

M23053/10‐007‐0 SFR‐7/8‐L

M23053/10‐008‐0 SFR‐1‐0‐L

M23053/10‐009‐0 SFR‐1‐1/4‐0‐L

M23053/10‐010‐0 SFR‐1‐1/2‐0‐L

M23053/10‐011‐0 SFR‐1‐3/4‐0‐L

M23053/10‐012‐0 SFR‐2‐0‐L

L = STK FOR 4 FOOT LENGTHS

SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

51 of 79

SAE-AS23053/11, INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE

FLOURINATED ETHYLENE PROPYLENE, NON-CROSSLINKED

M23053/11-104-* FEP;HS 1.3:1;AWG18;* or FEP;HS 1.3:1;1.52mm;* Zeus Industries – Aiken

M23053/11-105-* FEP;HS 1.3:1;AWG16;* or FEP;HS 1.3:1;1.91mm;* 11148003.AA/06-03-2019

M23053/11-106-* FEP;HS 1.3:1;AWG14;* or FEP;HS 1.3:1;2.34mm;*













M23053/11-119-* FEP;HS 1.3:1;3/8;* or FEP;HS 1.3:1;12.70mm;*





M23053/11-124-* FEP;HS 1.3:1;7/8;* or FEP;HS .3:1;29.72mm;*

M23053/11-125-* FEP;Roll Cover;1.300;*

M23053/11-126-* FEP;HS;1.3:1;1.000;* or FEP;HS .3:1;33.78mm;*

M23053/11-127-* FEP;Roll Cover;1.700;*

M23053/11-128-* FEP;Roll Cover;2.100;*

M23053/11-129-* FEP;Roll Cover;2.600;*

M23053/11-130-* FEP;Roll Cover;3.100;*

M23053/11-131-* FEP;Roll Cover;3.500;*

M23053/11-132-* FEP;Roll Cover;4.300;*

M23053/11-133-* FEP;HS 1.3:1;1 1/8;* or FEP;HS 1.3:1;38.10mm;*











QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

52 of 79

M23053/11-208-* FEP;HS 1.6:1;1.000;* or FEP;HS .6:1;25.40mm;* Zeus Industries – Aiken

M23053/11-209-* FEP;HS 1.6:1;1 1/2;* or FEP;HS 1.6:1;38.10mm;* 11148003.AA/06-03-2019

M23053/11-210-* FEP;HS 1.6:1;2.000;* or FEP;HS .6:1;50.80mm;* (continued)

* = COLOR SEE

AS23053

(*) = various lengths, spools, coils, colors, or surface

treatments

M23053/11-104-* FEP;HS 1.3:1; AWG18;* or FEP;HS 1.3:1;1.52mm;* Zeus Industries – Orangeburg

M23053/11-105-* FEP;HS 1.3:1;AWG16;* or FEP;HS 1.3:1;1.91mm;* 11148003.AB/06-03-2019


















M23053/11-201-* FEP;HS 1.6:1;3/32;* or FEP;HS or 1.6:1;2.36mm;*






* = various lengths, spools, coils, colors, or surface treatments

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

53 of 79

SAE-AS23053/12, INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE

POLYTETRAFLOUROETHYLENE

M23053/12-301-C HSTTT03 Panduit Corporation

M23053/12-302-C HSTTT04 11117203.AA/07-09-2019

M23053/12-303-C HSTTT046

M23053/12-304-C HSTTT05

M23053/12-305-C HSTTT055

M23053/12-306-C HSTTT06

M23053/12-308-C HSTTT08

M23053/12-310-C HSTTT09

M23053/12-312-C HSTTT12

M23053/12-314-C HSTTT15

M23053/12-317-C HSTTT19

M23053/12-320-C HSTTT24

M23053/12-322-C HSTTT30

M23053/12-324-C HSTTT37

M23053/12-327-C HSTTT43

M23053/12-330-C HSTTT47

M23053/12-201-* PTFE;HS 2:1;AWG24;SW;* or PTFE;HS 2:1;1.27mm;SW;* Zeus Industries – Aiken

M23053/12-202-* PTFE;HS 2:1;AWG22;SW;* or PTFE;HS 2:1;1.40mm;SW;* 11148003.AA/06-03-2019

M23053/12-203-* PTFE;HS 2:1;AWG20;SW;* or PTFE;HS 2:1;1.52mm;SW;* M23053/12-204-* PTFE;HS 2:1;AWG19;SW;* or PTFE;HS 2:1;1.65mm;SW;* M23053/12-205-* PTFE;HS 2:1;AWG18;SW;* or PTFE;HS 2:1;1.93mm;SW;* M23053/12-206-* PTFE;HS 2:1;AWG17;SW;* or PTFE;HS 2:1;2.16mm;SW;* M23053/12-207-* PTFE;HS 2:1;AWG15;SW;* or PTFE;HS 2:1;2.79mm;SW;* M23053/12-208-* PTFE;HS 2:1;AWG14;SW;* or PTFE;HS 2:1;3.05mm;SW;* M23053/12-209-* PTFE;HS 2:1;.130;SW;* or PTFE;HS 2:1;3.30mm;SW;* M23053/12-210-* PTFE;HS 2:1;AWG13;SW;* or PTFE;HS 2:1;3.56mm;SW;* M23053/12-211-* PTFE;HS 2:1;AWG12;SW;* or PTFE;HS 2:1;3.81mm;SW;* M23053/12-212-* PTFE;HS 2:1;AWG11;SW;* or PTFE;HS 2:1;4.32mm;SW;* M23053/12-213-* PTFE;HS 2:1;AWG10;SW;* or PTFE;HS 2:1;4.85mm;SW;* M23053/12-214-* PTFE;HS 2:1;AWG9;SW;* or PTFE;HS 2:1;5.21mm;SW;* M23053/12-215-* PTFE;HS 2:1;1/8;SW;* or PTFE;HS 2:1;5.46mm;SW;* M23053/12-216-* PTFE;HS 2:1;AWG8;SW;* or PTFE;HS 2:1;6.10mm;SW;* M23053/12-217-* PTFE;HS 2:1;AWG7;SW;* or PTFE;HS 2:1;6.86mm;SW;* M23053/12-218-* PTFE;HS 2:1;AWG6;SW;* or PTFE;HS 2:1;7.67mm;SW;* M23053/12-219-* PTFE;HS 2:1;AWG5;SW;* or PTFE;HS 2:1;8.13mm;SW;* M23053/12-220-* PTFE;HS 2:1;AWG4;SW;* or PTFE;HS 2:1;9.40mm;SW;*

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

54 of 79

M23053/12-221-* PTFE;HS 2:1;AWG3;SW;* or PTFE;HS 2:1;9.91mm;SW;* M23053/12-222-* PTFE;HS 2:1;1/4;SW;* or PTFE;HS 2:1;10.41mm;SW;* M23053/12-223-* PTFE;HS 2:1;AWG2;SW;* or PTFE;HS 2:1;10.92mm;SW;* M23053/12-224-* PTFE;HS 2:1;AWG1;SW;* or PTFE;HS 2:1;11.43mm;SW;* M23053/12-225-* PTFE;HS 2:1;5/16;SW;* or PTFE;HS 2:1;11.94mm;8.36mm;SW;*

M23053/12-226-* PTFE;HS 2:1;AWG0;SW;* or PTFE;HS

2:1;11.94mm;8.81mm;SW;*

M23053/12-227-* PTFE;HS 2:1;.470;SW;* or PTFE;HS 2:1;11.94mm;8.84mm;SW;*

M23053/12-228-* PTFE;HS 2:1;3/8;SW;* or PTFE;HS 2:1;14.22mm;SW;* M23053/12-229-* PTFE;HS 2:1;7/16;SW;* or PTFE;HS 2:1;16.64mm;SW;* M23053/12-230-* PTFE;HS 2:1;1/2;SW;* or PTFE;HS 2:1;19.05mm;SW;* M23053/12-231-* PTFE;HS 2:1;5/8;SW;* or PTFE;HS 2:1;23.62mm;SW;*

M23053/12-303-* PTFE;HS 2:1;AWG26;TW;* or PTFE;HS 2:1;1.17mm;TW;* M23053/12-304-* PTFE;HS 2:1;AWG24;TW;* or PTFE;HS 2:1;1.27mm;TW;* M23053/12-305-* PTFE;HS 2:1;AWG22;TW;* or PTFE;HS 2:1;1.40mm;TW;* M23053/12-306-* PTFE;HS 2:1;AWG20;TW;* or PTFE;HS 2:1;1.52mm;TW;* M23053/12-307-* PTFE;HS 2:1;AWG19;TW;* or PTFE;HS 2:1;1.65mm;TW;* M23053/12-308-* PTFE;HS 2:1;AWG18;TW;* or PTFE;HS 2:1;1.93mm;TW;* M23053/12-309-* PTFE;HS 2:1;AWG17;TW;* or PTFE;HS 2:1;2.16mm;TW;* Zeus Industries – Aiken

M23053/12-310-* PTFE;HS 2:1;AWG16;TW;* or PTFE;HS 2:1;2.36mm;TW;* 11148003.AA/06-03-2019

M23053/12-311-* PTFE;HS 2:1;AWG15;TW;* or PTFE;HS 2:1;2.79mm;TW;* (continued) M23053/12-312-* PTFE;HS 2:1;AWG14;TW;* or PTFE;HS 2:1;3.05mm;TW;* M23053/12-313-* PTFE;HS 2:1;AWG13;TW;* or PTFE;HS 2:1;3.56mm;TW;* M23053/12-314-* PTFE;HS 2:1;AWG12;TW;* or PTFE;HS 2:1;3.81mm;TW;* M23053/12-315-* PTFE;HS 2:1;.153;TW;* or PTFE;HS 2:1;3.89mm;TW;*

M23053/12-316-* PTFE;HS 2:1;AWG11;TW;* or PTFE;HS 2:1;4.32mm;TW;*

M23053/12-317-* PTFE;HS 2:1;AWG10;TW;* or PTFE;HS 2:1;4.85mm;TW;* M23053/12-318-* PTFE;HS 2:1;AWG9;TW;* or PTFE;HS 2:1;5.21mm;TW;*

M23053/12-319-* PTFE;HS 2:1;1/8;TW;* or PTFE;HS 2:1;5.46mm;TW;* M23053/12-320-* PTFE;HS 2:1;AWG8;TW;* or PTFE;HS 2:1;6.10mm;TW;* M23053/12-321-* PTFE;HS 2:1;AWG7;TW;* or PTFE;HS 2:1;6.86mm;TW;* M23053/12-322-* PTFE;HS 2:1;AWG6;TW;* or PTFE;HS 2:1;7.67mm;TW;* M23053/12-323-* PTFE;HS 2:1;AWG5;TW;* or PTFE;HS 2:1;8.13mm;TW;* M23053/12-324-* PTFE;HS 2:1;AWG4;TW;* or PTFE;HS 2:1;9.40mm;TW;* M23053/12-325-* PTFE;HS 2:1;AWG3;TW;* or PTFE;HS 2:1;9.91mm;TW;* M23053/12-326-* PTFE;HS 2:1;1/4;TW;* or PTFE;HS 2:1;10.41mm;TW;* M23053/12-327-* PTFE;HS 2:1;AWG2;TW;* or PTFE;HS 2:1;10.92mm;TW;* M23053/12-328-* PTFE;HS 2:1;AWG1;TW;* or PTFE;HS 2:1;11.43mm;TW;* M23053/12-329-* PTFE;HS 2:1;5/16;TW;* or PTFE;HS 2:1;11.94mm;8.36mm;TW;*

M23053/12-330-* PTFE;HS 2:1;AWG0;TW;* or PTFE;HS

2:1;11.94mm;8.81mm;TW;*

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

55 of 79

M23053/12-401-* PTFE;HS 2:1;AWG24;LW;* or PTFE;HS 2:1;1.27mm;LW;* M23053/12-402-* PTFE;HS 2:1;AWG22;LW;* or PTFE;HS 2:1;1.40mm;LW;* M23053/12-403-* PTFE;HS 2:1;AWG20;LW;* or PTFE;HS 2:1;1.52mm;LW;* M23053/12-404-* PTFE;HS 2:1;AWG19;LW;* or PTFE;HS 2:1;1.65mm;LW;* M23053/12-405-* PTFE;HS 2:1;AWG18;LW;* or PTFE;HS 2:1;1.93mm;LW;* M23053/12-406-* PTFE;HS 2:1;AWG17;LW;* or PTFE;HS 2:1;2.16mm;LW;* M23053/12-407-* PTFE;HS 2:1;AWG16;LW;* or PTFE;HS 2:1;2.36mm;LW;* M23053/12-408-* PTFE;HS 2:1;AWG15;LW;* or PTFE;HS 2:1;2.79mm;LW;* M23053/12-409-* PTFE;HS 2:1;AWG14;LW;* or PTFE;HS 2:1;3.05mm;LW;* M23053/12-410-* PTFE;HS 2:1;AWG13;LW;* or PTFE;HS 2:1;3.56mm;LW;* M23053/12-411-* PTFE;HS 2:1;AWG12;LW;* or PTFE;HS 2:1;3.81mm;LW;* M23053/12-412-* PTFE;HS 2:1;AWG11;LW;* or PTFE;HS 2:1;4.32mm;LW;* M23053/12-413-* PTFE;HS 2:1;AWG10;LW;* or PTFE;HS 2:1;4.85mm;LW;* M23053/12-414-* PTFE;HS 2:1;AWG9;LW;* or PTFE;HS 2:1;5.21mm;LW;* M23053/12-415-* PTFE;HS 2:1;1/8;LW;* or PTFE;HS 2:1;5.46mm;LW;* M23053/12-416-* PTFE;HS 2:1;AWG8;LW;* or PTFE;HS 2:1;6.10mm;LW;* M23053/12-417-* PTFE;HS 2:1;AWG7;LW;* or PTFE;HS 2:1;6.86mm;LW;* M23053/12-418-* PTFE;HS 2:1;AWG6;LW;* or PTFE;HS 2:1;7.67mm;LW;* M23053/12-419-* PTFE;HS 2:1;AWG5;LW;* or PTFE;HS 2:1;8.13mm;LW;* Zeus Industries – Aiken

M23053/12-420-* PTFE;HS 2:1;AWG4;LW;* or PTFE;HS 2:1;9.40mm;LW;* 11148003.AA/06-03-2019

M23053/12-421-* PTFE;HS 2:1;AWG3;LW;* or PTFE;HS 2:1;9.91mm;LW;* (continued) M23053/12-422-* PTFE;HS 2:1;1/4;LW;* or PTFE;HS 2:1;10.41mm;LW;* M23053/12-423-* PTFE;HS 2:1;AWG2;LW;* or PTFE;HS 2:1;10.92mm;LW;* M23053/12-424-* PTFE;HS 2:1;AWG1;LW;* or PTFE;HS 2:1;11.43mm;LW;* M23053/12-425-* PTFE;HS 2:1;5/16;LW;* or PTFE;HS

2:1;11.94mm;8.36mm:LW;*

M23053/12-426-* PTFE;HS 2:1;AWG0;LW;* or PTFE;HS

2:1;11.94mm;8.81mm;LW;*


M23053/12-101-* PTFE;HS 2:1;1/8;IND;* or PTFE;HS 2:1;4.22mm;IND;* Zeus Industries – Orangeburg

M23053/12-102-* PTFE;HS 2:1;3/16;IND;* or PTFE;HS 2:1;6.35mm;IND;* 11148003.AB/06-03-2019

M23053/12-103-* PTFE;HS 2:1;1/4;IND;* or PTFE;HS 2:1;8.46mm;IND;*







QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

56 of 79




MS3053/12-113-* PTFE;HS 2:1;1.000;IND;* or PTFE;HS 2:1;33.78mm;IND;*

M23053/12-201-* PTFE;HS 2:1;AWG24;SW;* or PTFE;HS 2:1;1.27mm;SW;*








M23053/12-209-* PTFE;HS 2:1;.130;SW;* or PTFE;HS 2:1;3.30mm;SW;*

M23053/12-210-* PTFE;HS 2:1;AWG13;SW; or * PTFE;HS 2:1;3.56mm;SW;*




M23053/12-214-* PTFE;HS 2:1;AWG9;SW;* or PTFE;HS 2:1;5.21mm;SW;* Zeus Industries – Orangeburg

M23053/12-215-* PTFE;HS 2:1;1/8;SW;* or PTFE;HS 2:1;5.46mm;SW;* 11148003.AB/

M23053/12-216-* PTFE;HS 2:1;AWG8;SW; or * PTFE;HS 2:1;6.10mm;SW;* 06-03-2019

M23053/12-217-* PTFE;HS 2:1;AWG7;SW;* or PTFE;HS 2:1;6.86mm;SW;* (continued)





M23053/12-222-* PTFE;HS 2:1;1/4;SW;* or PTFE;HS 2:1;10.41mm;SW;*

M23053/12-223-* PTFE;HS 2:1;AWG2;SW; * or PTFE;HS 2:1;10.92mm;SW;*


M23053/12-225-* PTFE;HS 2:1;5/16;SW;* or PTFE;HS

2:1;11.94mm;8.36mm;SW;*

M23053/12-226-* PTFE;HS 2:1;AWG0;SW;* or PTFE;HS

2:1;11.94mm;8.81mm;SW;*

M23053/12-227-* PTFE;HS 2:1;.470;SW;* or PTFE;HS

2:1;11.94mm;8.48mm;SW;*







M23053/12-234-* PTFE;HS 2:1;1.000;SW;* or PTFE;HS 2:1;38.10mm;SW;*

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

57 of 79

M23053/12-301-* PTFE;HS 2:1;AWG30;TW;* or PTFE;HS 2:1;.86mm;TW;*

M23053/12-302-* PTFE;HS 2:1;AWG28;TW;* or PTFE;HS 2:1;.96mm;TW;*













M23053/12-315-* PTFE;HS 2:1;.153;TW; * or PTFE;HS 2:1;3.89mm;TW;*

M23053/12-316-* PTFE;HS 2:1;AWG11;TW; *or PTFE;HS 2:1;4.32mm;TW;*


M23053/12-318-* PTFE;HS 2:1;AWG9;TW;* or PTFE;HS 2:1;5.21mm;TW;* Zeus Industries – Orangeburg

M23053/12-319-* PTFE;HS 2:1;1/8;TW;* or PTFE;HS 2:1;5.46mm;TW;* 11148003.AB/

M23053/12-320-* PTFE;HS 2:1;AWG8;TW; * or PTFE;HS 2:1;6.10mm;TW;* 06-03-2019

M23053/12-321-* PTFE;HS 2:1;AWG7;TW;* or PTFE;HS 2:1;6.86mm;TW;* (continued)





M23053/12-326-* PTFE;HS 2:1;1/4;TW;* or PTFE;HS 2:1;10.41mm;TW;*



M23053/12-329-* PTFE;HS 2:1;5/16;TW;* or PTFE;HS

2:1;11.94mm;8.36mm;TW;*

M23053/12-330-* PTFE;HS 2:1;AWG0;TW;* or PTFE;HS

2:1;11.94mm;8.81mm;TW;*

M23053/12-401-* PTFE;HS 2:1;AWG24;LW;* or PTFE;HS 2:1;1.27mm;LW;*








QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

58 of 79







M23053/12-415-* PTFE;HS 2:1;1/8;LW;* or PTFE;HS 2:1;5.46mm;LW;*







M23053/12-422-* PTFE;HS 2:1;1/4;LW;* or PTFE;HS 2:1;10.41mm;LW;*



M23053/12-425-* PTFE;HS 2:1;5/16;LW;* or PTFE;HS

2:1;11.94mm;8.36mm;LW;*

M23053/12-426-* PTFE;HS 2:1;AWG0;LW;* or PTFE;HS

2:1;11.94mm;8.81mm;LW;* Zeus Industries – Orangeburg

11148003.AB/

M23053/12-503-* PTFE;HS 4:1;3/16;* or PTFE;HS 4:1;4.75mm;* 06-03-2019

M23053/12-504-* PTFE;HS 4:1;1/4;* or PTFE;HS 4:1;6.35mm;* (continued)

M23053/12-505-* PTFE;HS 4:1;5/16;* or PTFE;HS 4:1;7.92mm;*










QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

59 of 79


FLUOROELASTOMER, FLEXIBLE

M23053/13-001-0 80-6102-5203-5 L & 7100030672 L 3M Company

M23053/13-002-0 80-6102-5204-3 L & 7100030673 L 11146003.AA/06-19-2018

M23053/13-003-0 80-6102-5206-8 L & 7010349778 L

M23053/13-004-0 80-6102-5210-0 L & 7100030676 L

M23053/13-005-0 80-6102-5212-6 L & 7010320074 L

M23053/13-006-0 80-6102-5213-4 L & 7100030679 L

M23053/13-007-0 80-6102-5217-5 L & 7100030678 L

M23053/13-008-0 80-6102-5214-2 L & 7100030675 L

M23053/13-009-0 80-6102-5215-9 L & 7100056040 L

M23053/13-010-0 80-6102-5216-7 L & 7100030674 L

M23053/13-011-0 80-6102-5217-5 L & 7100030678 L

M23053/13-012-0 80-6102-5202-7 L & 7100030677 L


M23053/13-001-* FIT-650 3/16" Alpha Wire Company

M23053/13-002-* FIT-650 1/4" 11145803.AA/06-19-18

M23053/13-003-* FIT-650 3/8"

M23053/13-004-* FIT-650 1/2"

M23053/13-005-* FIT-650 5/8"

M23053/13-006-* FIT-650 3/4"

M23053/13-007-* FIT-650 7/8"

M23053/13-008-* FIT-650 1"

M23053/13-009-* FIT-650 1 1/4"

M23053/13-010-* FIT-650 1 1/2"

M23053/13-011-* FIT-650 2"

M23053/13-012-* FIT-650 1/8"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

60 of 79

M23053/13-001-* DUNBAR V200-3/16”-* or DUNBAR QPL™-200-3/16”-* Dunbar Products LLC

M23053/13-002-* DUNBAR V200-1/4”-* or DUNBAR QPL™-200-1/4”-* 11148103.AA/06-19-18

M23053/13-003-* DUNBAR V200-3/8”-* or DUNBAR QPL™-200-3/8”-*





M23053/13-008-* DUNBAR V200-1”-* or DUNBAR QPL™-200-1”-*

M23053/13-009-* DUNBAR V200-1-1/4”-* or DUNBAR QPL™-200-1-1/4”-*

M23053/13-010-* DUNBAR V200-1-1/2”-* or DUNBAR QPL™-200-1-1/2”-*

M23053/13-011-* DUNBAR V200-2”-* or DUNBAR QPL™-200-2”-*



SEE AS23053

M23053/13-001-* MF392 3/16" Grayline LLC

M23053/13-002-* MF392 1/4" 11145903.AA/06-19-18

M23053/13-003-* MF392 3/8" M23053/13-004-* MF392 1/2" M23053/13-005-* MF392 5/8" M23053/13-006-* MF392 3/4" M23053/13-007-* MF392 7/8" M23053/13-008-* MF392 1" M23053/13-009-* MF392 1 1/4" M23053/13-010-* MF392 1 1/2" M23053/13-011-* MF392 2" M23053/13-012-* MF392 1/8"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

61 of 79

M23053/13-001-* LS-V200-3/16”-* LS Cable & System

M23053/13-002-* LS-V200-1/4”-* 11144903.AA/06-19-18

M23053/13-003-* LS-V200-3/8”-*

M23053/13-004-* LS-V200-1/2”-*

M23053/13-005-* LS-V200-5/8”-*

M23053/13-006-* LS-V200-3/4”-*

M23053/13-007-* LS-V200-7/8”-*

M23053/13-008-* LS-V200-1”-*

M23053/13-009-* LS-V200-1-1/4”-*

M23053/13-010-* LS-V200-1-1/2”-*

M23053/13-011-* LS-V200-2”-*

M23053/13-012-* LS-V200-1/8”-*


M23053/13-001-* HS-VTN 3/16" Insultab, Inc.

M23053/13-002-* HS-VTN 1/4" 11145503.AA/06-19-2018

M23053/13-003-* HS-VTN 3/8"

M23053/13-004-* HS-VTN 1/2"

M23053/13-005-* HS-VTN 5/8"

M23053/13-006-* HS-VTN 3/4"

M23053/13-007-* HS-VTN 7/8"

M23053/13-008-* HS-VTN 1"

M23053/13-009-* HS-VTN 1 1/4"

M23053/13-010-* HS-VTN 1 1/2"

M23053/13-011-* HS-VTN 2"

M23053/13-012-* HS-VTN 1/8"


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

62 of 79

M23053/13-001-* Sumitube FE3 3/16" Sumitomo Electric – Japan

M23053/13-002-* Sumitube FE3 1/4" 11148303.AA/02-01-19

M23053/13-003-* Sumitube FE3 3/8"

M23053/13-004-* Sumitube FE3 1/2"

M23053/13-005-* Sumitube FE3 5/8"

M23053/13-006-* Sumitube FE3 3/4"

M23053/13-007-* Sumitube FE3 7/8"

M23053/13-008-* Sumitube FE3 1"

M23053/13-009-* Sumitube FE3 1 1/4"

M23053/13-010-* Sumitube FE3 1 1/2"

M23053/13-011-* Sumitube FE3 2"

M23053/13-012-* Sumitube FE3 1/8"

M23053/13-001-* Sumitube KH200 or KH230 3/16"







M23053/13-008-* Sumitube KH200 or KH230 1"


MARKER SLEEVE CONTINUOUS TUBING FOR

SUMIMARK PRINTERS

M23053/13-001-* Sumimark SM3-60 3/16"

M23053/13-002-* Sumimark SM3-60 1/4"

M23053/13-003-* Sumimark SM3-60 3/8"

M23053/13-004-* Sumimark SM3-60 1/2"

M23053/13-005-* Sumimark SM3-60 5/8"

M23053/13-006-* Sumimark SM3-60 3/4"

M23053/13-007-* Sumimark SM3-60 7/8"

M23053/13-008-* Sumimark SM3-60 1"

M23053/13-009-* Sumimark SM3-60 1 1/4"

M23053/13-010-* Sumimark SM3-60 1 1/2"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

63 of 79

MARKER SLEEVE CONTINUOUS TUBING FOR

SUMITAG PRINTERS Sumitomo Electric – Japan inch / (metric) 11148303.AA/02-01-19

M23053/13-001-* HVT-3/16"-**-30M-SPL-2X / (HVT-048-30M-**-2X) (Continued)

M23053/13-002-* HVT-1/4"-**-30M-SPL-2X / (HVT-064-30M-**-2X)

M23053/13-003-* HVT-3/8"-**-30M-SPL-2X / (HVT-095-30M-**-2X)

M23053/13-004-* HVT-1/2"-**-30M-SPL-2X / (HVT-127-30M-**-2X)

M23053/13-006-* HVT-3/4"-**-30M-SPL-2X / (HVT-191-30M-**-2X)

M23053/13-008-* HVT-1"-**-15M-SPL-2X /

(HVT-254-15M-**-2X)

M23053/13-010-* HVT-1.5"-**-15M-SPL-2X / (HVT-381-15M-**2X)

M23053/13-011-* HVT-2"-**-15M-SPL-2X /

(HVT-508-15M-**-2X)

M23053/13-012-* HVT-1/8"-**-30M-SPL-2X / (HVT-032-30M-**-2X)

M23053/13-001-0 RW-200-3/16-0-L TE Connectivity- CA

M23053/13-002-0 RW-200-1/4-0-L 11120203.AA/06-19-18

M23053/13-003-0 RW-200-3/8-0-L

M23053/13-004-0 RW-200-1/2-0-L

M23053/13-005-0 RW-200-5/8-L

M23053/13-006-0 RW-200-3/4-0-L

M23053/13-007-0 RW-200-7/8-L

M23053/13-008-0 RW-200-1-0-L

M23053/13-009-0 RW-200-1-1/4-0-L

M23053/13-010-0 RW-200-1-1/2-0-L

M23053/13-011-0 RW-200-2-0-L

M23053/13-012-0 RW-200-1/8-0-L


SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

64 of 79


POLYOLEFIN, HEAVY-WALL, COATED, FLEXIBLE, OUTER WALL CROSSLINKED

M23053/15-101-0 80-6114-5428-3 L & 7000132410 L 3M Company

M23053/15-102-0 80-6102-9461-5 L & 7000132411 L 11146003.AA/06-19-2018

M23053/15-103-0 80-6102-9462-3 L & 7000132412 L

M23053/15-104-0 80-6102-9464-9 L & 7100011352 L

M23053/15-105-0 80-6102-9465-6 L & 7000132414 L

M23053/15-106-0 80-6114-4331-0 L & 7010397983 L

M23053/15-107-0 80-6108-2042-7 L & 7010396826 L

M23053/15-108-0 80-6102-9459-9 L & 7000132409 L

M23053/15-109-0 80-6110-7203-6 L & 7010350348 L

M23053/15-110-0 80-6114-4918-4 L & 7000133200 L

M23053/15-111-0 80-6116-0674-2 L & 7010399041 L

M23053/15-112-0 80-6102-9466-4 L & 7000132415 L

M23053/15-201-0 80-6102-9482-1 L & 7000132416 L

M23053/15-202-0 80-6102-9483-9 L & 7000132417 L

M23053/15-203-0 80-6102-9484-7 L & 7000132418 L

M23053/15-204-0 80-6102-9485-4 L & 7000005984 L

M23053/15-205-0 80-6102-9486-2 L & 7000132419 L

M23053/15-206-0 80-6102-9487-0 L & 7000132420 L

M23053/15-207-0 80-6102-9489-6 L & 7000132421 L

M23053/15-208-0 80-6102-9488-8 L & 7000005985 L


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

65 of 79

M23053/15-101-0 DUNBAR PHWT-20mm-0 or DUNBAR QPL™-HW-750-0 Dunbar Products LLC

M23053/15-102-0 DUNBAR PHWT-27mm-0 or DUNBAR QPL™-HW-1100-0 11148103.AA/06-19-18

M23053/15-103-0 DUNBAR PHWT-38mm-0 or DUNBAR QPL™-HW-1500-0










M23053/15-101-0 LS-PHWT-FR-20mm-0 LS Cable & System

M23053/15-102-0 LS-PHWT-FR-27mm-0 11144903.AA/06-19-18

M23053/15-103-0 LS-PHWT-FR-38mm-0

M23053/15-104-0 LS-PHWT-FR-51mm-0

M23053/15-105-0 LS-PHWT-FR-75mm-0

M23053/15-106-0 LS-PHWT-FR-100mm-0

M23053/15-107-0 LS-PHWT-FR-7mm-0

M23053/15-108-0 LS-PHWT-FR-10mm-0

M23053/15-109-0 LS-PHWT-FR-35mm-0

M23053/15-110-0 LS-PHWT-FR-43mm-0

M23053/15-111-0 LS-PHWT-FR-70mm-0

M23053/15-112-0 LS-PHWT-FR-115mm-0

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

66 of 79

M23053/15-101-0 SST-48-07/FR/* TE Connectivity- CA

M23053/15-102-0 SST-48-11/FR/* 11120203.AA/06-19-18

M23053/15-103-0 SST-48-15/FR/*

M23053/15-104-0 SST-48-20/FR/*

M23053/15-105-0 SST-48-30/FR/*

M23053/15-106-0 SST-48-40/FR/*

M23053/15-107-0 SST-48-03/FR/*

M23053/15-108-0 SST-48-04/FR/*

M23053/15-109-0 SST-48-13/FR/*

M23053/15-110-0 SST-48-17/FR/*

M23053/15-111-0 SST-48-27/FR/*

M23053/15-112-0 SST-48-45/FR/*

M23053/15-201-0 SST-48-04/FR/*

M23053/15-202-0 SST-48-07/FR/*

M23053/15-203-0 SST-48-11/FR/*

M23053/15-204-0 SST-48-13/FR/*

M23053/15-205-0 SST-48-15/FR/*

M23053/15-206-0 SST-48-17/FR/*

M23053/15-207-0 SST-48-27/FR/*

M23053/15-208-0 SST-48-20/FR/*

* 97 =Adhesive

226 =Sealant

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

67 of 79

M23053/15-101-0 SST-48-07/FR/* TE Connectivity- Germany

M23053/15-102-0 SST-48-11/FR/* 11120203.AB/06-19-18

M23053/15-103-0 SST-48-15/FR/*

M23053/15-104-0 SST-48-20/FR/*

M23053/15-105-0 SST-48-30/FR/*

M23053/15-106-0 SST-48-40/FR/*

M23053/15-107-0 SST-48-03/FR/*

M23053/15-108-0 SST-48-04/FR/*

M23053/15-109-0 SST-48-13/FR/*

M23053/15-110-0 SST-48-17/FR/*

M23053/15-111-0 SST-48-27/FR/*

M23053/15-112-0 SST-48-45/FR/*

M23053/15-201-0 SST-48-04/FR/*

M23053/15-202-0 SST-48-07/FR/*

M23053/15-203-0 SST-48-11/FR/*

M23053/15-204-0 SST-48-13/FR/*

M23053/15-205-0 SST-48-15/FR/*

M23053/15-206-0 SST-48-17/FR/*

M23053/15-207-0 SST-48-27/FR/*

M23053/15-208-0 SST-48-20/FR/*

* 97 =Adhesive

226 =Sealant

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

68 of 79


CROSSLINKED, ELASTOMERIC POLYOLEFIN, FLEXIBLE

M23053/16-001-0 80-6106-7545-8 L & 7010396619 L 3M Company

M23053/16-002-0 80-6106-7546-6 L & 7100079227 L 11146003.AA/06-19-2018

M23053/16-003-0 80-6106-7547-4 L & 7100079228 L

M23053/16-004-0 80-6106-7548-2 L & 7100079229 L

M23053/16-005-0 80-6106-7550-8 L & 7100079230 L

M23053/16-006-0 80-6106-7552-4 L & 7100030670 L


M23053/16-001-0 DUNBAR DR150-1/4”-0 or DUNBAR QPL™-DR-1/4”-0 Dunbar Products LLC

M23053/16-002-0 DUNBAR DR150-3/8”-0 or DUNBAR QPL™-DR-3/8”-0 11148103.AA/06-19-18

M23053/16-003-0 DUNBAR DR150-1/2”-0 or DUNBAR QPL™-DR-1/2”-0

M23053/16-004-0 DUNBAR DR150-3/4”-0 or DUNBAR QPL™-DR-3/4”-0

M23053/16-005-0 DUNBAR DR150-1”-0 or DUNBAR QPL™-DR-1”-0

M23053/16-006-0 DUNBAR DR150-1-1/4”-0 or DUNBAR QPL™-DR-1-1/4”-0




M23053/16-001-0 LG-DRET-1/4”-0 LS Cable & System

M23053/16-002-0 LG-DRET-3/8”-0 11144903.AA/06-19-18

M23053/16-003-0 LG-DRET-1/2”-0

M23053/16-004-0 LG-DRET-3/4”-0

M23053/16-005-0 LG-DRET-1”-0

M23053/16-006-0 LG-DRET-1-1/2”-0

M23053/16-007-0 LG-DRET-2”-0

M23053/16-008-0 LG-DRET-3”-0

M23053/16-009-0 LG-DRET-4”-0

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

69 of 79

M23053/16-001-0 Sumitube R120 1/4" Sumitomo Electric – Japan

M23053/16-002-0 Sumitube R120 3/8" 11148303.AA/02-01-19

M23053/16-003-0 Sumitube R120 1/2"

M23053/16-004-0 Sumitube R120 3/4"

M23053/16-005-0 Sumitube R120 1"

M23053/16-006-0 Sumitube R120 1 1/2"

M23053/16-007-0 Sumitube R120 2"

M23053/16-008-0 Sumitube R120 3"

M23053/16-009-0 Sumitube R120 4"

M23053/16-001-0 Sumitube AN25 1/4"

M23053/16-002-0 Sumitube AN25 3/8"

M23053/16-003-0 Sumitube AN25 1/2"

M23053/16-004-0 Sumitube AN25 3/4"

M23053/16-005-0 Sumitube AN25 1"

M23053/16-006-0 Sumitube AN25 1 1/2"

M23053/16-007-0 Sumitube AN25 2"

M23053/16-008-0 Sumitube AN25 3"

M23053/16-009-0 Sumitube AN25 4"

M23053/16-001-0 Sumitube FR25 1/4"

M23053/16-002-0 Sumitube FR25 3/8"

M23053/16-003-0 Sumitube FR25 1/2"

M23053/16-004-0 Sumitube FR25 3/4"

M23053/16-005-0 Sumitube FR25 1"

M23053/16-006-0 Sumitube FR25 1 1/2"

M23053/16-007-0 Sumitube FR25 2"

M23053/16-008-0 Sumitube FR25 3"

M23053/16-009-0 Sumitube FR25 4"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

70 of 79

M23053/16-001-0 DR-25-1/4-0-L TE Connectivity- CA

M23053/16-002-0 DR-25-3/8-0-L 11120203.AA/06-19-18

M23053/16-003-0 DR-25-1/2-0-L

M23053/16-004-0 DR-25-3/4-0-L

M23053/16-005-0 DR-25-1-0-L

M23053/16-006-0 DR-25-1-1/2-0-L

M23053/16-007-0 DR-25-2-0-L

M23053/16-008-0 DR-25-3-0-L

M23053/16-009-0 DR-25-4-0-L


SP FOR SPOOLS

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

71 of 79


MODIFIED FLUOROPOLYMER, CROSSLINKED

M23053/18-101-* FIT-CLEAR 3/64" Alpha Wire Company

M23053/18-102-* FIT-CLEAR 1/16" 11145803.AA/06-19-18

M23053/18-103-* FIT-CLEAR 3/32" M23053/18-104-* FIT-CLEAR 1/8" M23053/18-105-* FIT-CLEAR 3/16" M23053/18-106-* FIT-CLEAR 1/4" M23053/18-107-* FIT-CLEAR 3/8"

*M23053/18-108-* FIT-CLEAR 1/2" M23053/18-109-* FIT-CLEAR 3/4" M23053/18-110-* FIT-CLEAR 1" M23053/18-111-* FIT-CLEAR 1 1/2" M23053/18-112-* FIT-CLEAR 2"


M23053/18-201-* DUNBAR FK150-3/64”-* or DUNBAR QPL™-PMK-3/64”-* Dunbar Products LLC

M23053/18-202-* DUNBAR FK150-1/16”-* or DUNBAR QPL™-PMK-1/16”-* 11148103.AA/06-19-18

M23053/18-203-* DUNBAR FK150-3/32”-* or DUNBAR QPL™-PMK-3/32”-*







M23053/18-210-* DUNBAR FK150-1”-* or DUNBAR QPL™-PMK-1”-*


SEE AS23053

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

72 of 79

M23053/18-201-* LS-FK150-3/64”-* LS Cable & System

M23053/18-202-* LS-FK150-1/16”-* 11144903.AA/06-19-18

M23053/18-203-* LS-FK150-3/32”-*

M23053/18-204-* LS-FK150-1/8”-*

M23053/18-205-* LS-FK150-3/16”-*

M23053/18-206-* LS-FK150-1/4”-*

M23053/18-207-* LS-FK150-3/8”-*

M23053/18-208-* LS-FK150-1/2”-*

M23053/18-209-* LS-FK150-3/4”-*

M23053/18-210-* LS-FK150-1”-*


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

73 of 79

M23053/18-101-* Sumitube K2 3/64" Sumitomo Electric – Japan

M23053/18-102-* Sumitube K2 1/16" 11148303.AA/02-01-19

M23053/18-103-* Sumitube K2 3/32"

M23053/18-104-* Sumitube K2 1/8"

M23053/18-105-* Sumitube K2 3/16"

M23053/18-106-* Sumitube K2 1/4"

M23053/18-107-* Sumitube K2 3/8"

M23053/18-108-* Sumitube K2 1/2"

M23053/18-109-* Sumitube K2 3/4"

M23053/18-110-* Sumitube K2 1"

M23053/18-111-* Sumitube K2 1 1/2"

M23053/18-112-* Sumitube K2 2"

MARKER SLEEVE CONTINUOUS TUBING

FOR SUMITAG PRINTERS

inch / (metric sizes)

M23053/18-104-* HTC-1/8-**-30M-SPL-2X / (HTC-032-30M-**-2X)

M23053/18-105-* HTC-3/16-**-30M-SPL-2X / (HTC-048-30M-**-2X)

M23053/18-106-* HTC-1/4-**-30M-SPL-2X / (HTC-064-30M-**-2X)

M23053/18-107-* HTC-3/8-**-30M-SPL-2X / (HTC-095-30M-**-2X)

M23053/18-108-* HTC-1/2-**-30M-SPL-2X / (HTC-127-30M-**-2X)

M23053/18-109-* HTC-3/4-**-30M-SPL-2X / (HTC-191-30M-**-2X)

M23053/18-110-* HTC-1-**-20M-SPL-2X / (HTC-254-20M-**-2X)

M23053/18-111-* HTC-1.5-**-20M-SPL-2X / (HTC-381-15M-**-2X)

M23053/18-304-* Sumitube K3 1/8"

M23053/18-305-* Sumitube K3 3/16"

M23053/18-306-* Sumitube K3 1/4"

M23053/18-307-* Sumitube K3 3/8"

M23053/18-308-* Sumitube K3 1/2"

M23053/18-309-* Sumitube K3 3/4"

M23053/18-310-* Sumitube K3 1"

M23053/18-304-* Sumitube KH200(TW) or KH230(TW) 1/8"






M23053/18-310-* Sumitube KH200(TW) or KH230(TW) 1"

QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

74 of 79

MARKER SLEEVE CONTINUOUS TUBING

FOR SUMIMARK PRINTERS Sumitomo Electric – Japan

M23053/18-304-* Sumimark SM3-31 1/8" 11148303.AA/02-01-19

M23053/18-305-* Sumimark SM3-31 3/16" (continued)

M23053/18-306-* Sumimark SM3-31 1/4"

M23053/18-307-* Sumimark SM3-31 3/8"

M23053/18-308-* Sumimark SM3-31 1/2"

M23053/18-309-* Sumimark SM3-31 3/4"

M23053/18-310-* Sumimark SM3-31 1"

* See AS23053 for

color codes

**color codes

SUMITAG PRODUCTS ARE SOLD AS

15 METER, 20METER, OR 30METER LENGTHS ON SPOOL ONLY

BULK TUBING Sumi-Pac Corporation

M23053/18-101-* Sumitube K2 3/64” 11148703.AA/02-01-19

M23053/18-102-* Sumitube K2 1/16”

M23053/18-103-* Sumitube K2 3/32”

M23053/18-104-* Sumitube K2 1/8”

M23053/18-105-* Sumitube K2 3/16”

M23053/18-106-* Sumitube K2 1/4”

M23053/18-107-* Sumitube K2 3/8”

M23053/18-108-* Sumitube K2 1/2”

M23053/18-109-* Sumitube K2 3/4”

M23053/18-110-* Sumitube K2 1”


QPL-23053-3

SPECIFICATION

DESIGNATION

MANUFACTURER’S

DESIGNATION


AND QUALIFICATION

TEST REFERENCE

75 of 79

M23053/18-201-C RT-375-3/64-X-L TE Connectivity- CA

M23053/18-202-C RT-375-1/16-X-L 11120203.AA/06-19-18

M23053/18-203-C RT-375-3/32-X-L

M23053/18-204-C RT-375-1/8-X-L

M23053/18-205-C RT-375-3/16-X-L

M23053/18-206-C RT-375-1/4-X-L

M23053/18-207-C RT-375-3/8-X-L

M23053/18-208-C RT-375-1/2-X-L

M23053/18-209-C RT-375-3/4-X-L

M23053/18-210-C RT-375-1-X-L

M23053/18-201-* RNF-150-3/64-*-L

M23053/18-202-* RNF-150-1/16-*-L

M23053/18-203-* RNF-150-3/32-*-L

M23053/18-204-* RNF-150-1/8-*-L

M23053/18-205-* RNF-150-3/16-*-L

M23053/18-206-* RNF-150-1/4-*-L

M23053/18-207-* RNF-150-3/8-*-L

M23053/18-208-* RNF-150-1/2-*-L

M23053/18-209-* RNF-150-3/4-*-L

M23053/18-210-* RNF-150-1-*-L

M23053/18-301-C HT-200-3/64-X-L

M23053/18-302-C HT-200-1/16-X-L

M23053/18-303-C HT-200-3/32-X-L

M23053/18-304-C HT-200-1/8-X-L

M23053/18-305-C HT-200-3/16-X-L

M23053/18-306-C HT-200-1/4-X-L

M23053/18-307-C HT-200-3/8-X-L

M23053/18-308-C HT-200-1/2-X-L

M23053/18-309-C HT-200-3/4-X-L

M23053/18-310-C HT-200-1-X-L

* = COLOR SEE AS23053 X= CLEAR


SP FOR SPOOLS

QPL-23053-3

MANUFACTURER’S OFFICE ADDRESS

(Where contracts are received)

MANUFACTURER’S PLANT ADDRESS

(Primary source of manufacturing & control)

76 of 79

3M Company 3M Company

6801 River Place Blvd. 279 Billerica Road

Austin, Texas 78726 Chelmsford, MA 01824

Cage Code: 53387 Cage Code: 7C0E7

Alpha Wire Company Alpha Wire Company

711 Lidgerwood Avenue 711 Lidgerwood Avenue

Elizabeth, NJ 07202 Elizabeth, NJ 07202

Cage Code: 92194 Cage Code: 92194

Brady Worldwide Brady Worldwide

6555 West Good Hope Road 6555 West Good Hope Road

Milwaukee, WI 53223 USA Milwaukee, WI 53223 USA

Cage Code: 3WAW1 Cage Code: 3WAW1

Dunbar Products LLC CNB-Tek

1302 Champion Circle 387, Sinsadaehwa-Ro, Seongnam-Myeon

Carrollton, TX 75006 Dongham-Gu, Cheonan-Si, South Korea 31245

Cage Code: 1QL94 Cage Code: 447CF

Dunbar Products LLC Dunbar Products LLC

1302 Champion Circle 1302 Champion Circle

Carrollton, TX 75006 Carrollton, TX 75006

Cage Code: 1QL94 Cage Code: 1QL94

Grayline LLC Grayline LLC

2101 Airport Road 2101 Airport Road

Waukesha, WI 53188 Waukesha, WI 53188

Cage Code: 1L9D2 Cage Code: 1L9D2

QPL-23053-3





77 of 79

Dunbar Products LLC LS Cable & System

1302 Champion Circle 238, 3gongdan 2-ro

Carrollton, TX 75006 Gumi, Gyeongbuk, South Korea 39395

Cage Code: 1QL94 Cage Code: 1060F

Insultab, Inc. Insultab, Inc.

45 Industrial Parkway 45 Industrial Parkway

Woburn, MA 01801 Woburn, MA 01801


Panduit Corporation Panduit De Costa Rica Ltd

1819 Atlanta Hwy Zona Franca Codiao ZF 499502

Cumming, GA 30130 1.5 Km Este de la inters

Le Argentina, DeGrecia

Alajuela Costa Rica

Cage Code: 5MST4 Cage Code: SGS00

Sumitomo Electric Interconnect Products, Inc. (SEIP)

Sumitomo Electric Interconnect Products, Inc.

(SEIP)

915 Armorlite Drive 915 Armorlite Drive

San Marcos, CA 92069 San Marcos, CA 92069

Cage Code: 1JX75 Cage Code: 1JX75

Sumitomo Electric Sumitomo Electric

Schrumpf-Produkte GmbH (SESP) Schrumpf-Produkte GmbH (SESP)

Oststrasse 89, D 22844 Oststrasse 89, D 22844

Norderstedt, Germany Norderstedt, Germany

Cage Code: C8275 Cage Code: C8275

QPL-23053-3





78 of 79

Sumi-Pac Corporation Sumi-Pac Corporation

No. 2 Kon Ye 5 Road, Fon San No. 2 Kon Ye 5 Road, Fon San

Tsuen, Fu Kow Shan, Hsin Chu Tsuen, Fu Kow Shan, Hsin Chu

Hsien 303, Taiwan, R.O.C. Hsien 303, Taiwan, R.O.C.

Cage Code: SBZQ8 Cage Code: SBZQ8

Sumitomo Electric Fine Polymer, Inc. Sumitomo Electric Fine Polymer, Inc.

1-950, Asashironishi, Kumatori-cho 1-950, Asashironishi, Kumatori-cho

Sennan-gun, Osaka 590-0458 Japan Sennan-gun, Osaka 590-0458 Japan

Cage Code: S7726 Cage Code: S7726

TE Connectivity TE Connectivity

501 Oakside Avenue 501 Oakside Avenue

Redwood City, CA 94063 Redwood City, CA 94063


TE Connectivity TE Raychem GmbH

501 Oakside Avenue Finsinger Feld 1. Ottobrunn, Bayern,

Redwood City, CA 94063 85521 Germany

Cage Code: 06090 Cage Code: D1973

TE Connectivity Tyco Electronics EC Trutnov s.r.o.

501 Oakside Avenue Komenskeho 821, Trutnov- Stredni Predmesti,

Redwood City, CA 94063 Trutnov, 54101 Czech Republic

Cage Code: 06090 Cage Code: 0198G

QPL-23053-3





79 of 79

Zeus Industrial Products, Inc. Zeus Industrial Products, Inc.

3737 Industrial Blvd. 9150 Levels Church Road

Orangeburg, SC 29118 W. Aiken, SC 29801

Cage Code: 6Y609 Cage Code: 747L1

Zeus Industrial Products, Inc. Zeus Industrial Products, Inc.

3737 Industrial Blvd. 620 Magnolia Street, Orangeburg, SC

Orangeburg, SC 29118 Orangeburg, SC 29118

Cage Code: 6Y609 Cage Code: 6Y609

qualifications have been validated …...qpl-23053-3 specification designation manufacturer’s...

Documents