2 3 4 51

Quadcopter UAV V2 LIMITED WARRANTY

Merlin Products are covered by a limited one-year warranty policy. If the product su�ers from a manufacturing defect, the customer will receive a replacement if claimed within 15 days of the purchase date. Otherwise, the product will be inspected for possible repair options. The product will either be repaired and returned free of charge, or replaced. All repair services past the one-year warranty period will be charged for any repairs that need to be made.

If the client is located outside the UAE, or is otherwise unable to personally deliver the defective product to our service center or retail outlets, he/she may send it via post at his/her own cost. The repaired/replaced product will then be returned to the client via courier mail at Merlin’s cost, as long as the warranty period is still active.

Important: This limited warranty DOES NOT COVER normal wear and tear, accidents, damage during transit, misuse, abuse or neglect. Attempting to disassemble the unit will render the warranty null and void.

We hope you enjoy the quality of Merlin Digital product.Please take out a few minutes to register your product at merlin-digital.com/register to avail:

• Special discounts and promotions on other Merlin products• Exclusive information on new products and innovations

• Reminders about product �rmware downloads, updates and upgrades• Competitions and exciting giveaways

To learn more about Merlin products visit our site at: www-merlin-digital.com orlike our Facebook page on facbook.com/merlin.digital.gadgets

For enquiries and information call our toll free number 800-MERLIN (Sat-Thu, 9 am - 6 pm)

Contact our support sta� for troubleshooting and any other enquiries relating toyour Merlin product by sending an email at support@merlin-digital.com

and your issue will be resolved within 48 hours.

REGISTERfor exclusive

product releasesand future

prize drawings!

REGISTERNOW

Mazaya Centre

Burj Khalifa

Safest WaySuper Market

Business BayMetro Station

Burj Khalifa/Dubai MallMetro Station

To Abu Dhabi

PETZONE

Parking

Entrance from back sideSERVICE CENTER MAP

Al Thouraya Building

SHEIKH ZAYED ROAD

For a complete list of our worldwide locations,visit http://merlin-digital.com/contacts

Introduc�on

Thank you for purchasing this Merlin Product. Please read the instruction manual carefully before using the product.

The documentation provided will allow you to fully enjoy all the features this unit has to o�er.

Please save this manual for future reference.

Instruc�ons:

Precautions:This device is a sophisticated product and should be handled and operated with care. Please be aware of the laws in your country regarding owning and operating UAV’s. This device is suitable for people older than 14 years. Please note that some experience may be required to e�ectively operated this device.

Charging the battery:Insert 4 x AA batteries (not included) into the remote controller.

Before using the drone please charge the battery. Never charge the battery when connected to the drone. - To charge the battery connect it to the USB charging cable and then to a usb port on a computer.- While it is charging the light will be on. It will go o� when charging is complete.- Install the charged battery into the base of the drone. - Connect the battery plug to the drone and switch the power switch to the “On” position.

Setup:1. The arms can be folded up (for using) or down (when storing) and locking it with the sliding button.

2. Install the blades from the top and the arms in the up position. Ensure the blade’s direction of turn is the same as that of the motor. Finally screw it with the supplied screw.

3. Next attach the protective frames that prevent the blades from getting damaged.

4. Snap the landing gear in place

5. Finally insert a micro sd card in the sd slot, for recording video

Remote Control layout:

4. Flying Control:

a. Throttle: Move the left stick Up and Down.

b. Backward and Forward: Move the right stick Up and

Down to �y forward and back. Please note the camera lens side is the front.

c. Move sideways: Move the left stick Left and Right.

d. Turning Left and Right: Move the right stick Left and Right.

5. Micro adjustments

Headless Mode:In this mode the drone will use the pilot’s position as a point for reference for any signals received when using the right control stick. (If the stick is pushed forward the drone will go forward. When pushes back it will be return back. The direction of travel will not be a�ected.)

1. Flying direction setup: Put the drone right in-front of you. Point the remote towards the back of the drone and press the one key take o� button.2. While �ying press the headless mode button. The remote will produce a beep, beep sound and the lights will blink fast to indicate headless mode is on. To turn headless mode o� press the button again and a beep sound will be made.

Settings screen: The settings screen can be used to set and reset some functions.

In the Play mode you can control all the drone.

As a safety the o� button is to be pressed to get the �ight controls. These are the same as on the remote.

]

High/Low Speed Mode:The drone has two speed modes, low and high. The default mode is slow. To enable high speed mode press speed button. The unit will beep twice to indicate high speed mode. If you want to return to slow speed mode press the speed button again and it will beep once.

Photo and video:If a smartphone is used with the drone photos and videos can be taken with the respective buttons. Note: When using the smartphone �r this function, wait 20 seconds after the drone has been switched on before taking photos.

Resetting the Drone:1. This function is used to reset the drone’s gyro and the micro adjustment.

2. Before resetting the drone please ensure the unit is on a �at surface. Push the sticks downwards and inwards as shown on the picture for 2 seconds. The remote will beep and the drone’s lights will blinks fast to indicate the reset is in progress.

Emergency Landing:1. If the drone needs to be stopped urgently press the buttons on the remote as in the picture. Please do not attempt this when the unit is at high altitude as the drone can get damaged by the fall.

2. When the drone tilts for more than 45 degrees it will automatically stop to protect the engines.

3. When using the app slide the throttle down and press the ‘one key take-o�’ button for and emergency landing.

Build in Camera:The built-in camera can be moved up or down by using the buttons on the remote or in the app.

Obstacle avoidance by infrared sensor:This drone is also equipped with an Infra Red sensor to will detect obstacles and avoid them while in hover mode.

Please note: - This function uses refraction of infra red beam emitted from the side of the unit and received by the sensor at the bottom of the unit. - This is not an automatic avoidance system. This system is only active when the unit is in hover mode. It will be switched o� when the drone controls are active and being moved in a direction.

Application:

When running the application it will start with is screen. From here you can access in app manual, setting and control the drone.

Google Play Store link

iOS App store link

Applications download links:The Quadcopter UAV can be used with the “Quadcopter UAV V2” mobile application available for iOS and Android.

App instructions:- After downloading the app please make sure the drone is switched on. - Go to your mobile phone’s Wi-Fi settings and look for the “QuadCopterUAV V2XXXXXX” and connect to it.- After connecting open the Quadcopter UAE V2 application. - The drone can be controlled by the application in real time.

Remote Control:1. Smartphone holder: When using a smartphone with the Quadcopter please remove the normal battery cover and replace it with the smartphone holder battery cover. Please make sure your phone is securely in place before using it with the product.

2. Match the remote to the drone’s frequency: a. The drone and the remote has to be matched for it to work together. b. To do this put the drone on a �at surface and turn it on. The lights on it will �ash.c. Turn on the remote and push the left stick up and then down once. d. Once paired a beep sound will be heard and the lights will stop �ashing.

3. For ‘One key’ take-o� and landing you can press the ‘H’ button on the remote.

2

4. Flying Control:

a. Throttle: Move the left stick Up and Down.

b. Backward and Forward: Move the right stick Up and

Down to �y forward and back. Please note the camera lens side is the front.

c. Move sideways: Move the left stick Left and Right.

d. Turning Left and Right: Move the right stick Left and Right.

5. Micro adjustments

Headless Mode:In this mode the drone will use the pilot’s position as a point for reference for any signals received when using the right control stick. (If the stick is pushed forward the drone will go forward. When pushes back it will be return back. The direction of travel will not be a�ected.)

1. Flying direction setup: Put the drone right in-front of you. Point the remote towards the back of the drone and press the one key take o� button.2. While �ying press the headless mode button. The remote will produce a beep, beep sound and the lights will blink fast to indicate headless mode is on. To turn headless mode o� press the button again and a beep sound will be made.

Google Play Store link

iOS App store link

Applications download links:The Quadcopter UAV can be used with the “Quadcopter UAV V2” mobile application available for iOS and Android.

App instructions:- After downloading the app please make sure the drone is switched on. - Go to your mobile phone’s Wi-Fi settings and look for the “QuadCopterUAV V2XXXXXX” and connect to it.- After connecting open the Quadcopter UAE V2 application. - The drone can be controlled by the application in real time.

Remote Control:1. Smartphone holder: When using a smartphone with the Quadcopter please remove the normal battery cover and replace it with the smartphone holder battery cover. Please make sure your phone is securely in place before using it with the product.

2. Match the remote to the drone’s frequency: a. The drone and the remote has to be matched for it to work together. b. To do this put the drone on a �at surface and turn it on. The lights on it will �ash.c. Turn on the remote and push the left stick up and then down once. d. Once paired a beep sound will be heard and the lights will stop �ashing.

3. For ‘One key’ take-o� and landing you can press the ‘H’ button on the remote.