qiod inspection services
TRANSCRIPT
QIOD The quality People
Quality inspection on demand
QIOD INSPECTION SERVISEJB 18 F HARI ENCLAVE HARI NAGAR, NEW DELHI 11064 Ph +919810461683 , +9145587683E-mail - [email protected]
A division of LOL Clothing company
Quality Inspections On Demand We are in to Apparel, Home Textiles, Home
Decoration , Home deco hard goods Inspections.
QIOD The Quality People
1. All fabric lots must be tested for shrinkage with patterns/markersadjusted to meet required specifications.
Some recommended quality tips from QIOD Inspections.
The Quality People
2. Before spreading, fabric should be removed from the bolt and placed inrelaxing boxes for a minimum of 24 hours.
The Quality People
3. Fabric should be spread evenly with uniform tension. Do not pull orstretch fabric as it will distort the cut pieces.
The Quality People
4. After being spread, fabric must rest for a minimum of 24 hours before cutting.
The Quality People
5. The maximum height of lays for cutting is 80 pieces or 6" dependingon the type of fabric.
The Quality People6. Recommended standard seam allowance is 3/8" with 1/8" trim off.Finished seams should be 1/4".
The Quality People
7. All sewing needles must be ball point. Singer use 9-14, Metric use 90- 70, Union Special use 027-036.
The Quality People8.For better result , core spun (Coats will be Epic, A&E will be Perma Core) sewing thread will be used on all seams and topstitching. Threadsize: Light weight use T-24 (metric M-120), Medium weight must use T-40(metric M-75). But it depend on styling .
The Quality People
9. Fusible of interlining must be use from good quality .
The Quality People
10. Fusing equipment must be checked four times during each eighthours of operation for temperature and cleanliness of fusing surface. Alltests to be documented and available for inspection. 11. Standard fusible color: white on white/light colors; charcoal onmedium/dark colors.
The quality People
12. Zippers must be used good quality like YKK, Ideal etc
The Quality People
13. All irons must have a Teflon shoe. All
pressing tables must have a
polyester pad with a silicon cover. Pressing cloths on steam tables
must
be changed daily and the pads aired out to
dry over night.
The Quality People14. Garments
are to be steamed only
and lightly pressed when
necessary
15. No hard pressing is allowed,
ghosting of seams and
necklines onto opposite panels
is not acceptable
The Quality People
• 16. For a nap fabric you must use a needle board
16. For a nap fabric you must use a needle board.
• 17. Velour or velvet fabric is cut with the nap up.
17. Velour or velvet fabric is cut with the nap up.
The Quality People
18 , Embroidery must use a tear-away or water soluble backing and it must be completely removed. There can not be any residue left on the garment. All loose threads must be trimmed on embroidery.
19• Embroidery threads cannot have
jump threads longer than ½” on the back side
The quality People
21 , EPIC thread from Coats must
be used when
attaching beads and sequins on
the garment.
20, Beading
and sequins must be knotted
every 3/4".
The Quality People
22 All stripes are to match at the side seams of the front and back
panels. Stripes will match at center front and center back of
seamed.
.QIOD
Quality Inspection On Demand
QIODJB 18 F, Hari Enclave, Hari Nagar , New Delhi 110064. Ph +919810461683 , 01145587683 E-Mail :- [email protected], [email protected]
Quality Inspections On Demand We are in to Apparel, Home textails,Home
Decoration , Home deco hard goods Inspections.
A Division of lol clothing Company