qgd - deep well pump short manual - wiltec - deep well pump s… · short manual deep well pump...

3
© by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info Short Manual Deep Well Pump Replacing the Pump Shaft Article number 50723 / 50725 / 50726

Upload: vodien

Post on 07-May-2018

222 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: QGD - Deep Well Pump short manual - WilTec - Deep Well Pump s… · Short Manual Deep Well Pump Replacing the Pump Shaft Article number 50723 / 50725 / 50726 ... Microsoft Word -

© by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info

Short Manual Deep Well Pump Replacing the Pump Shaft

Article number 50723 / 50725 / 50726

Page 2: QGD - Deep Well Pump short manual - WilTec - Deep Well Pump s… · Short Manual Deep Well Pump Replacing the Pump Shaft Article number 50723 / 50725 / 50726 ... Microsoft Word -

© by WilTec Wildanger Technik GmbH Seite 2 http://www.wiltec.info

Thank you for buying our product. The following pictures provide guidance on installing, respectively replacing the pump shaft of our deep well pumps.

First remove the 4 long screws and both lugs at the top of the pump housing. Now you can open the pump and remove underlying silicone cover.

Page 3: QGD - Deep Well Pump short manual - WilTec - Deep Well Pump s… · Short Manual Deep Well Pump Replacing the Pump Shaft Article number 50723 / 50725 / 50726 ... Microsoft Word -

© by WilTec Wildanger Technik GmbH Seite 3 http://www.wiltec.info

Pull up the shaft guiding piece / wheel (Wellen-Führungskörper), now you can lift (take off) the whole upper part of the pump body.

By using a 13 spanner the pump shaft can be removed/releases from its holder. (Left-hand thread)

When fitting (installing) the new shaft, always ensure that all parts should be reassembled as illustrated in the photos, otherwise the pump can be irreparably damaged.