q2. seimic waves and earth’s interior
TRANSCRIPT
-
8/12/2019 Q2. Seimic Waves and Earths Interior
1/14
-
8/12/2019 Q2. Seimic Waves and Earths Interior
2/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 2
individually to expound upon the differences.
The first two wave types, P and S , are called body wavesbecause they travel
or propagate through the body of Earth. The latter two are called surface
wavesthey the travel along Earth's surface and their amplitude decreases with
depth into Earth.
Wave Travel Times
Travel times are best conceptualized of with an analogy of an auto trip. If you have to travel 120 miles and you
drive 60 mph, you'll get to your destination in two hours, if you are forced to drive at a speed of 30 mph, it will
take you twice as long to arrive at your destination. The mathematical formula we use in this problem is
driving time = (distance of trip) / (driving speed)
To apply those ideas to earthquake studies, think of the earthquake location as the starting point for the trip and
the seismometer as the place where the trip concludes. Faster waves will travel the distance quicker and show up
on the seismogram first.
travel time = (distance from earthquake to seismometer) / (seismic wave speed)
Travel time is a relative time, it is the number of minutes, seconds, etc. that the wave took to complete its
journey. The arrival time is the time when we record the arrival of a wave - it is an absolute time, usually
referenced to Universal Coordinated Time (a 24-hour time system used in many sciences). Here's an example to
illustrate the difference: if two earthquakes occurred at the same place but exactly 24 hours apart, the wave
travel times would be the same but the arrival times would differ by one day.
Seismic Wave Speed
Seismic waves travel fast, on the order of kilometers per second (km/s). The precise speed that a seismic wave
travels depends on several factors, most important is the composition of the rock. We are fortunate that the
speed depends on the rock type because it allows us to use observations recorded on seismograms to infer the
composition or range of compositions of the planet. But the process isn't always simple, because sometimes
different rock types have the same seismic-wave velocity, and other factors also affect the speed, particularly
temperature and pressure. Temperature tends to lower the speed of seismic waves and pressure tends to
increase the speed. Pressure increases with depth in Earth because the weight of the rocks above gets larger withincreasing depth. Usually, the effect of pressure is the larger and in regions of uniform composition, the velocity
generally increases with depth, despite the fact that the increase of temperature with depth works to lower the
wave velocity.
When I describe the different seismic wave types below I'll quote ranges of speed to indicate the range of values
we observe in common terrestrial rocks. But you should keep in mind that the specific speed throughout Earth
will depend on composition, temperature, and pressure.
Compressional or P-Waves
-
8/12/2019 Q2. Seimic Waves and Earths Interior
3/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 3
P-waves are the first waves to arrive on a complete record of ground shaking because they travel the fastest
(their name derives from this fact - P is an abbreviation for primary, first wave to arrive). They typically travel at
speeds between ~1 and ~14 km/sec. The slower values corresponds to a P-wave traveling in water, the higher
number represents the P-wave speed near the base of Earth's mantle.
The velocity of a wave depends on the elastic properties and density of a material. If we let krepresent the bulk
modulus of a material, mthe shear-modulus, and rthe density, then the P-wave velocity, which we represent by
a, is defined by:
A modulus is a measure of how easy or difficulty it is to deforms a material. For example, the bulk modulus is a
measure of how a material changes volume when pressure is applied and is a characteristic of a material. For
example, foam rubber has a lower bulk modulus than steel.
P-waves are sound waves, it's just that in seismology we are interested in frequencies that are lower than
humans' range of hearing (the speed of sound in air is about 0.3 km/sec). The vibration caused by P waves is avolume change, alternating from compression to expansion in the direction that the wave is traveling. P-waves
travel through all types of media - solid, liquid, or gas.
As a P-wave passes the ground is vibrated inthe direction that the wave is propagating.
S-Waves
Secondary , or S waves, travel slower than P waves and are also called "shear" waves because they don't
change the volume of the material through which they propagate, they shear it. S-waves are transverse waves
because they vibrate the ground in a the direction "transverse", or perpendicular, to the direction that the wave is
traveling.
As a transverse wave passes the groundperpendicular to the direction that the wave
-
8/12/2019 Q2. Seimic Waves and Earths Interior
4/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 4
is propagating. S-waves are transversewaves.
The S-wave speed, call it b , depends on the shear modulus and the density
Even though they are slower than P-waves, the S-waves move quickly. Typical S-wave propagation speeds areon the order of 1 to 8 km/sec. The lower value corresponds to the wave speed in loose, unconsolidated
sediment, the higher value is near the base of Earth's mantle.
An important distinguishing characteristic of an S-wave is its inability to propagate through a fluid or a gas
because a fluids and gasses cannot transmit a shear stress and S-waves are waves that shear the material.
In general, earthquakes generate larger shear waves than compressional waves and much of the damage close to
an earthquake is the result of strong shaking caused by shear waves.
Using P and S-waves To Locate Earthquakes
We can use the fact that P and S waves travel at different speeds to locate earthquakes. Assume a seismometer
are is far enough from the earthquake that the waves travel roughly horizontally, which is about 50 to 500 km for
shallow earthquakes. When an earthquake occurs the P and S waves travel outward from the region of the fault
that ruptured and the P waves arrive at the seismometer first, followed by the S-wave. Once the S-wave arrives
we can measure the time interval between the onset of P-wave and the onset of S-wave shaking.
The travel time of the P wave is
distance from earthquake / (P-wave speed)
The travel time of the S wave is
distance from earthquake / (S-wave speed)
The difference in the arrival times of the waves is
distance from earthquake / (S-wave speed) - distance from earthquake / (P-wave speed)
which equals
distance from earthquake * ( 1/ (S-wave speed) - 1 / (P-wave speed) )
We can measure that difference from a seismogram and if we also know the speed that the waves travel, we
could calculate the distance by equating the measured time difference and the expression. For the distance range
50 to 500 km, the S-waves travel about 3.45 km/s and the P-waves around 8 km/s. The value in parentheses is
then equal to about (1/3.45 - 1/8) or about 1/8. Thus the simple rule of thumb for earthquakes in this distance
range is the distance is about eight times the arrival time of S-wave less the arrival time of the P-wave.
That means that we can estimate the distance an earthquake is from a seismometer. The earthquake can be in
-
8/12/2019 Q2. Seimic Waves and Earths Interior
5/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 5
any direction, but must be the estimated distance away. Geometrically that means that the earthquake must be
located on a circle surrounding the seismometer, and the radius of the circle is about eight times the observed
wave travel-time difference (in kilometers).
If we have two other seismometers which recorded the same earthquake, we could make a similar measurement
and construct a circle of possible locations for each seismometer. Since the earthquake location since it must lie
on each circle centered on a seismometer, if we plot three or more circles on a map we could find that the three
circles will intersect at a single location - the earthquake's epicenter.
Using the "S minus P arrival time" to locate an earthquake.You need at least three stations and some idea of the P andS velocities between the earthquake and the seismometers.
In practice we use better estimates of the speed than our simple rule of thumb and solve the problem using
algebra instead of geometry. We also can include the earthquake depth and the time that earthquake rupture
initiated (called the "origin time") into the problem.
Love Waves
Love waves are transverse waves that vibrate the ground in the horizontal direction perpendicular to the direction
that the waves are traveling. They are formed by the interaction of S waves with Earth's surface and shallow
structure and are dispersive waves. The speed at which a dispersive wave travels depends on the wave's period.
In general, earthquakes generate Love waves over a range of periods from 1000 to a fraction of a second, and
each period travels at a different velocity but the typical range of velocities is between 2 and 6 km/second.
Love waves are transverse and restricted to horizontalmovement - they are recorded only on seismometers thatmeasure the horizontal ground motion.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
6/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 6
Another important characteristic of Love waves is that the amplitude of ground vibration caused by a Love wave
decreases with depth - they're surface waves. Like the velocity the rate of amplitude decrease with depth also
depends on the period.
Rayleigh Waves
Rayleigh waves are the slowest of all the seismic wave types and in some ways the most complicated. Like Love
waves they are dispersive so the particular speed at which they travel depends on the wave period and the near-surface geologic structure, and they also decrease in amplitude with depth. Typical speeds for Rayleigh waves
are on the order of 1 to 5 km/s.
Rayleigh waves are similar to water waves in the ocean(before they "break" at the surf line). As a Rayleigh wavepasses, a particle moves in an elliptical trajectory that iscounterclockwise (if the wave is traveling to your right).The amplitude of Rayleigh-wave shaking decreases withdepth.
Seismic Wave Propagation
Waves on a Seismogram
As you might expect, the difference in wave speed has a profound influence on the nature of seismograms. Since
the travel time of a wave is equal to the distance the wave has traveled, divided by the average speed the wave
moved during the transit, we expect that the fastest waves arrive at a seismometer first. Thus, if we look at a
seismogram, we expect to see the first wave to arrive to be a P-wave (the fastest), then the S-wave, and finally,
the Love and Rayleigh (the slowest) waves. Although we have neglected differences in the travel path (which
correspond to differences in travel distance) and the abundance waves that reverberate within Earth, the overall
character is as we have described.
The fact that the waves travel at speeds which depend on the material properties (elastic moduli and density)
allows us to use seismic wave observations to investigate the interior structure of the planet. We can look at the
travel times, or the travel times and the amplitudes of waves to infer the existence of features within the planet,
and this is a active area of seismological research. To understand how we "see" into Earth using vibrations, we
must study how waves interact with the rocks that make up Earth.
Several types of interaction between waves and the subsurface geology (i.e. the rocks) are commonly
observable on seismograms
-
8/12/2019 Q2. Seimic Waves and Earths Interior
7/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 7
Refraction
Reflection
Dispersion
Diffraction
Attenuation
We'll examine the two simplest types of interaction refraction and reflection.
Refraction
As a wave travels through Earth, the path it takes depends on the velocity. Perhaps you recall from high school a
principle called Snell's law, which is the mathematical expression that allows us to determine the path a wave
takes as it is transmitted from one rock layer into another. The change in direction depends on the ratio of the
wave velocities of the two different rocks.
When waves reach a boundary between different rock types, part of theenergy is transmitted across the boundary. The transmitted wave travelsin a different direction which depends on the ratio of velocities of the
two rock types. Part of the energy is also reflected backwards into theregion with Rock Type 1, but I haven't shown that on this diagram.
Refraction has an important affect on waves that travel through Earth. In general, the seismic velocity in Earth
increases with depth (there are some important exceptions to this trend) and refraction of waves causes the path
followed by body waves to curve upward.
The overall increase in seismic wave speed w ith depth into Earthproduces an upward curvature to rays that pass through the mantle. Anotable exception is caused by the decrease in velocity from the mantleto the core. This speed decrease bends waves backwards and creates a"P-wave Shadow Zone" between about 100 and 140 distance (1 =111.19 km).
-
8/12/2019 Q2. Seimic Waves and Earths Interior
8/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 8
Reflection
The second wave interaction with variations in rock type is reflection. I am sure that you are familiar with
reflected sound waves; we call them echoes. And your reflection in a mirror or pool of water is composed of
reflected light waves. In seismology, reflections are used to prospect for petroleum and investigate Earth's
internal structure. In some instances reflections from the boundary between the mantle and crust may induce
strong shaking that causes damage about 100 km from an earthquake (we call that boundary the "Moho" in
honor of Mohorovicic, the scientist who discovered it).
A seismic reflection occurs when a wave impinges on a change in rock type (which usually is accompanied by a
change in seismic wave speed). Part of the energy carried by the incident wave is transmitted through the materia
(that's the refracted wave described above) and part is reflected back into the medium that contained the inciden
wave.
When a wave encounters a change in material properties (seismicvelocities and or density) its energy is split into reflected and refractedwaves.
The amplitude of the reflection depends strongly on the angle that the incidence wave makes with the boundary
and the contrast in material properties across the boundary. For some angles all the energy can be returned into
the medium containing the incident wave.
The actual interaction between a seismic wave and a contrast in rock properties is more complicated because an
incident P wave generates transmitted and reflected P- andS-waves and so five waves are involved. Likewise,
when an S-wave interacts with a boundary in rock properties, it too generates reflected and refracted P- and S-
waves.
Dispersion
I mentioned above that surface waves are dispersive - which means that different periods travel at differentvelocities. The effects of dispersion become more noticeable with increasing distance because the longer travel
distance spreads the energy out (it disperses the energy). Usually, the long periods arrive first since they are
sensitive to the speeds deeper in Earth, and the deeper regions are generally faster.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
9/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 9
A dispersed Rayleigh wave generated by an earthquake in Alabama nearthe Gulf coast, and recorded in Missouri.
P-Waves in Earth
The mathematics behind wave propagation is elegant and relatively simple, considering the fact that similar
mathematical tools are useful for studying light, sound, and seismic waves. We can solve these equations or an
appropriate approximation to them to compute the paths that seismic waves follow in Earth. The diagram below
is an example of the paths P-waves generated by an earthquake near Earth's surface would follow.
The paths of P-wave energy for a shallow earthquake located at the top
-
8/12/2019 Q2. Seimic Waves and Earths Interior
10/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 10
of the diagram. The main chemical shells of Earth are shown bydifferent colors and regions with relatively abrupt velocity changes areshown by dashed lines. The curves show the paths of waves, and the linescrossing the rays show mark the wavefront at one minute intervals.
Note the curvature of the rays in the mantle, the complexities in the upper mantle, and the dramatic impact of the
core on the wavefronts. The decrease in velocity from the lower mantle to the outer core casts a "shadow" on the
P-waves that extends from about 100 to 140 distance. Other waves such as surface waves and body waves
reflecting off the surface are recorded in the "shadow" region, but the P-wave "dies out" near 100. Since the
outer core is fluid, and S-waves cannot travel through a fluid, the "S-wave shadow zone" is even larger,
extending from about 100 to 180.
Earth's Internal Structure
We have already discussed the main elements in Earth's interior, the core, the mantle, and the crust. By studying
the propagation characteristics (travel times, reflection amplitudes, dispersion characteristics, etc.) of seismic
waves for the last 90 years we have learned much about the detailed nature of Earth's interior. Great progress
was made quickly because for the most part Earth's interior is relatively simple, divided into a sphere (the innercore) surrounded by roughly uniform shells of iron and rock. Models that assume the Earth is perfectly symmetric
can be used to predict travel times of P-waves that are accurate to a few seconds for a trip all the way across
the planet.
The diagram below is a plot of the P- and S-wave velocities and the density as a function of depth into Earth.
The top of the Earth is located at 0 km depth, the center of the planet is at 6371 km.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
11/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 1
Velocity and density variations w ithin Earth based on seismicobservations. The main regions of Earth and important boundaries arelabeled. This model was developed in the early 1980's and is calledPREM for Preliminary Earth Reference Model.
Several important characteristics of Earth's structure are illustrated in the chart. First note that in several large
regions such as in the lower mantle, the outer core, and inner core, the velocity smoothly increases with depth.
The increase is a result of the effects of pressure on the seismic wave speed. Although temperature also increases
with depth, the pressure increase resulting from the weight of the rocks above has a greater impact and the speed
increases smoothly in these regions of uniform composition.
The shallow part of the mantle is different; it contains several important well-established and relatively abrupt
velocity changes. In fact, we often divide the mantle into two regions, upper and lower, based on the level of
velocity heterogeneity. The region from near 400 to 1000 km depth is called the transition zone and strongly
affects body waves that "turn" at this depth and arrive about 20-30 distant from a shallow earthquake. In this
depth range the minerals that make up the mantle silicate rocks are transformed by the increasing pressure. The
atoms in these rocks rearrange themselves into compact structures that are stable at the high pressures and the
result of the rearrangement is an increase in density and elastic moduli, producing an overall increase in wave
speed.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
12/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 12
Graphite in "lead" pencils and diamonds are a more common example of atoms rearranging
themselves under different conditions - they are both composed of carbon. The different
arrangement and bonding of the carbon atoms in the two materials produces dramatically different
properties. Diamonds are formed under enormous pressures; all natural diamonds formed at depths
of about 150-200 km, and were brought to the surface by volcanic activity. At the high pressures
the carbon atoms are squeezed into a tight arrangement that makes them one of the hardest
materials. In contrast, the low-pressure arrangement of carbon in graphite creates the slippery, soft
character of "lead" that we use for pencils.
The two largest contrasts in material properties in the Earth system are located near the surface and the core-
mantle boundary. Both are compositional boundaries and the core-mantle boundary is the larger contrast. Other
sharp contrasts are observable, the inner-core outer-core boundary is relatively sharp, and velocities increase
from the liquid to the solid.
Models of Earth's Heterogeneity
The PREM model is a useful reference for understanding the main features of Earth. More recent efforts have
focused on estimating the lateral variations in wave speed within the shells that make up the reference model.These approaches are often based on seismic tomography, which is a way of mapping out the variations in
structure using observations from large numbers of seismograms. The basic idea is to use observed delayed (or
early) arrival times (delayed with respect to the reference model) to locate regions of relatively fast and relatively
slow seismic wave speed.
The idea is illustrated in the cartoon to the left. Waves are representedby arrows and are traveling from left to right. Those that travelthrough the slow region are slowed down, and hence will be recordedlater on the a seismogram.
The same ideas are used in medical CAT scan imaging of human bodies,
but the observed quantity in a CAT scan is not a travel time, but the
amount of x-ray absorption. Ultrasound imaging is identical to P-wave
tomography, it's just that in seismology we don't have the choice of
where are wave sources are located - we just exploit earthquakes.
In the two decades tomography has been applied to Earth studies on many scales, from looking at small regions
of Earth's crust that may contain petroleum, to imaging the entire planet. On a global scale, we might expect that
the shallow parts of the mantle would correlate with the major structural features we can observe at the surface -
the plate boundaries.
In regions where material is rising from the mantle, it should be warmer, and the velocity should be lower, in
regions that are old and cold, such as beneath many of the old parts of continents, we would expect to see faster
regions (assuming that temperature is the only difference). The actual variations are influenced by both
temperature and composition variations, but they agree well with the ideas of plate tectonics, particularly at the
divergent boundaries or oceanic spreading ridges.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
13/14
3/6/2014 Seimic Waves and Earths Interior
http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/waves_and_inter ior .html 13
Map of the variations in seismic shear-wave speed with respect to the value in PREM at 100 km depth. Thewarm colors (red, orange, and yellow) show regions with slower than normal speeds, the darker regions arefaster than normal. Note the correlation with plate boundaries and surface heat flow. (Model S12 WM13, fromW.-J. Su, R. L. Woodward and A. M. Dziewonski, Degree-12 Model of Shear Velocity Heterogeneity in theMantle, Journal of Geophysical Research, vol. 99(4) 4945-4980, 1994).
The velocities deeper in the Earth have also be imaged. The next map shows the variations at 2,880 km depth ,
in the mantle just above the core-mantle boundary. The color scale is the same but note how the lower-mantlevelocity variations are more subdued than those in the more heterogeneous upper mantle. Also, note that the
correlation with surface tectonics is gone, as you would expect for a complex convective system such as Earth's
mantle.
-
8/12/2019 Q2. Seimic Waves and Earths Interior
14/14
3/6/2014 Seimic Waves and Earths Interior
Map of the variations in seismic shear-wave speed with respect to the value in PREM at 2,880 km depth, justabove the core mantle boundary. The warm colors (red, orange, and yellow) show regions with slower thannormal speeds, the darker regions are faster than normal. Note the correlation with plate boundaries andsurface heat flow. (Model S12 WM13, from W.-J. Su, R. L. Woodward and A. M. Dziewonski, Degree-12 Modelof Shear Velocity Heterogeneity in the Mantle, Journal of Geophysical Research, vol. 99(4) 4945-4980,1994).
These variations are actually quite small, on the order of a few percent, so the basic idea of Earth being aspherically stratified planet are well founded. In the crust, the variations are larger and can reach tens of percent.
The crust is the material extracted from the mantle over the last 4.5 billion years and it contains a great diversity
of structures that are often apparent when you study the rocks exposed at the surface.
Back to EAS 193 Notes| Back to EAS 193 Home
Ammon's Home| Department of Geosciences
Prepared by: Charles J. Ammon(Last updated:8/1/101 )
mailto:[email protected]://www.geosc.psu.edu/http://www.essc.psu.edu/~ammon/http://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/EAS_A193_Home.htmlhttp://eqseis.geosc.psu.edu/~cammon/HTML/Classes/IntroQuakes/Notes/NotesDirectory.html