q list 1list 1list 1list 1 approved steelmakers and

This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

© Lloyd’s Register Group Limited 2014. All rights reserved.

This list identifies works approved by Lloyd’s Register Group Limited (LR) for steelmakingand the manufacture of rolled steel plate, strip, sections and bars in accordance with therequirements of LR's Rules for the Manufacture, Testing and Certification of Materials,Chapter 3.

The information listed for each works is a summary of the product, generic grade andmaximum thickness, or in the case of round bars, diameter approved.

It is important to note that this list does not provide full details of the grades approved byLR as required by the Rules. The combinations of deoxidation practice (e.g. killed,semi-killed), micro-alloying and grain refining additions (e.g. Al, Al + Nb Al + Nb + V,etc.), in association with specific rolling procedures ( e.g. N or TM, etc.), are not included.These parameters may vary within each grade by manufacturer and could influence thefabrication procedures that can be applied.

The list also includes firms approved for the manufacture of fabricated steel sections.

Where required this information should be obtained from the current certificate of approvalissued to the manufacturer by LR.

Works designated "MQS Approved" are also approved under the Materials Quality Schemein accordance with LR's Rules for the Manufacture, Testing and Certification of Materials,Chapter 1 Section 2.

Approval only covers the manufacturing location listed, it does not extend to other worksowned by the same company. The local LR surveying office is also listed.

Abbreviations:

B.O.S. Basic Oxygen SteelmakingCon Cast Continuous CastingE.A.F. Electric Arc FurnaceO.H. Open Hearth

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers,employees or agents are, individually and collectively, referred to in this clause as 'Lloyd'sRegister'. Lloyd's Register assumes no responsibility and shall not be liable to any person forany loss, damage or expense caused by reliance on the information or advice in thisdocument or howsoever provided, unless that person has signed a contract with therelevant Lloyd's Register entity for the provision of this information or advice and in thatcase any responsibility or liability is exclusively on the terms and conditions set out in thatcontract.

List 1List 1List 1List 1

Approved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers of

Rolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & Bars

As at 13 May 2014



Name and AddressName and AddressName and AddressName and Address Max Thickness/Diameter (mm)Max Thickness/Diameter (mm)Max Thickness/Diameter (mm)Max Thickness/Diameter (mm)GradeGradeGradeGradeCategoryCategoryCategoryCategoryProductProductProductProduct

List 1List 1List 1List 1Approved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers ofApproved Steelmakers and Manufacturers ofRolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & BarsRolled Steel Plates, Strip, Sections & Bars

LR OfficeLR OfficeLR OfficeLR Office

ArgentinaArgentinaArgentinaArgentina

carbon, carbon-manganese 30E.A.F. / IngotSteelmakingACEROS ANGELETTI S.A.ACEROS ANGELETTI S.A.ACEROS ANGELETTI S.A.ACEROS ANGELETTI S.A. Buenos Airescarbon, carbon-manganese 30Ingots (tonnes)Semi-Finished

Av. Hipolito Yrigoyen 16102/96(1852)-Burzaco

Burzaco

Tel No: +54 11 4299 0110 Fax no: +54 11 4299 0110Email:[email protected]: www.acerosangeletti.com.arCertificate No. MD00/3676/ 0002/ 1 Expiry date 22/02/2015

Pcia. de Buenos Aires

AustraliaAustraliaAustraliaAustralia

As belowB.O.S. / Con CastSteelmakingBLUESCOPE STEEL (AIS) PTY. LTD.BLUESCOPE STEEL (AIS) PTY. LTD.BLUESCOPE STEEL (AIS) PTY. LTD.BLUESCOPE STEEL (AIS) PTY. LTD. SydneyA, B, D, E 51Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

51Higher Strength

A, B, D, E 13Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

6Higher Strength

P.O. Box 1854Wollongong

Port Kembla Steelworks

Tel: +61 2 42754666 Fax: +61 2 42753045 Email: mailto:[email protected] with specified through thickness properties notation Z35 may be added.Normalizing heat treatments carried out by sub-contractor, Bisalloy.

Certificate # MD00/1929/0008/1 Expiry date: 20/07/2015

NSW 2500

AustriaAustriaAustriaAustria

As belowE.A.F./V.O.D./IngotSteelmakingBREITENFELD EDELSTAHL AGBREITENFELD EDELSTAHL AGBREITENFELD EDELSTAHL AGBREITENFELD EDELSTAHL AG Viennacarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless

120Ingots (tonnes)Semi-Finished

A-8662 Mitterdorf im MürztalBreitenfeldstrasse 22

Tel: +43 (0)3858 6161 231 Fax +43 (0)3858 6161 248 Email mailto:[email protected]: http://www.breitenfeld.atCertificate # MD00/3255/0004/1 Expiry Date: 07/06/2015Including VD/VOD

As belowE.A.F./Ingot/Con CastSteelmakingBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbHBÖHLER EDELSTAHL GmbH Viennacarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless

220StructuralBars

Postfach 96A-8605 Kapfenberg

Mariazellerstraße 25

Tel: +43 3862 20 37063 Fax: +43 3862 20 37559 Email: mailto:[email protected] Web:http://www.bohler-edelstahl.comCertificate #: MD00/0200/0007/1 Expiry date: 22/01/2015

A, B, D, E 20Normal StrengthSectionsBÖHLER YBBSTAL PROFIL GmbHBÖHLER YBBSTAL PROFIL GmbHBÖHLER YBBSTAL PROFIL GmbHBÖHLER YBBSTAL PROFIL GmbH ViennaAH32, AH36, DH32, DH36, EH32, EH36 20Higher StrengthA, B, D, E 20Normal StrengthBarsAH32, AH36, DH32, DH36, EH32, EH36 20Higher Strengthcarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless

20Structural

Waidhofnerstraße 83333 BöhlerwerkTel: +43 7448 7007 504 Fax: +43 7448 7007 250 Email: mailto:[email protected] Web:http://www.bohler-profil.comHigh alloy bars and sections may be accepted for approved applications.Certificate #: MD00/0202/0006/1 Expiry date: 28/01/2015

As below 38VAR/INGOTSteelmakingSONDERSTAHLWERK BREITENFELD GmbHSONDERSTAHLWERK BREITENFELD GmbHSONDERSTAHLWERK BREITENFELD GmbHSONDERSTAHLWERK BREITENFELD GmbH Viennacarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless


carbon, carbon-manganese, alloy, austeniticstainless, duplex

38IngotsESR

A-8661 WartbergBreitenfeldgasse 23

Tel +43 (0)3858 6161 231 Fax +43 (0)3858 6161 248 Email [email protected] Web http://www.breitenfeld.atCertificate # MD00/3256/0004/1 Expiry date: 06/06/2015Including remelting of Ni materials

As at 13 May 2014 2Page






A 120Normal StrengthBarsSTAHL JUDENBURG GmbHSTAHL JUDENBURG GmbHSTAHL JUDENBURG GmbHSTAHL JUDENBURG GmbH Viennacarbon, carbon-manganese 120Structuralcarbon, carbon-manganese, carbon-manganese 120Machinery

Gußstahlwerkstrasse 21A-8750 JudenburgTel: +43 3572 701-358 Fax: +43 3572 701-248 Email: mailto:[email protected] Web: http://www.stahl-judenburg.comCertificate #: MD00/1643/0006/1 Expiry date: 29/01/2015

As belowB.O.S. / Con CastSteelmakingVOESTALPINE GROBBLECH GmbHVOESTALPINE GROBBLECH GmbHVOESTALPINE GROBBLECH GmbHVOESTALPINE GROBBLECH GmbH ViennaA, B, D, E 140Normal StrengthPlatesAH42, DH42, EH42 55Higher StrengthAH40, DH40, EH40, FH40 100AH32, AH36, DH32, DH36, EH32, EH36, FH32,FH36

140

360AR 40Boiler & Pressure Vessel410AR 50360FG, 410FG, 460FG, 490FG, 510FG 1401.5Ni, 3.5Ni, 5Ni, 9Ni 50Ferritic Low TemperatureLTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, LTFH32, LTFH36

140

D/304L 50CladP.O Box 3Voest.- Alpine - Str. 3

Tel: +43 50304 15 9091 Fax: +43 50304 55 9091Email: mailto:[email protected] Web: www.voestalpine.com

Certifcate No. MD00/1614/0008/1 Expiry date: 30/07/2014

Approval includes the supply of z25 and z35 grades.

Approval includes pressed heads.

A-4020 Linz

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingVOESTALPINE STAHL DONAWITZ GmbH & CoVOESTALPINE STAHL DONAWITZ GmbH & CoVOESTALPINE STAHL DONAWITZ GmbH & CoVOESTALPINE STAHL DONAWITZ GmbH & CoKGKGKGKG

Vienna

carbon, carbon-manganese, alloy 285Blooms/BilletsSemi-Finished

A 8700 LeobenKerpelystraße 199

Tel: +43 50304 25-4659 Fax: +43 50304 65-2464 Email: mailto:[email protected] Web:http://www.voestalpine.com/stahldonawitzCertificate #: MD00/2976/0004/1 Expiry date: 21/04/2015

Belarus, Republic ofBelarus, Republic ofBelarus, Republic ofBelarus, Republic of

As belowE.A.F./V.O.D./Con CastSteelmakingOJSC "Byelorussian Steel Works-ManagementOJSC "Byelorussian Steel Works-ManagementOJSC "Byelorussian Steel Works-ManagementOJSC "Byelorussian Steel Works-ManagementCompany ofCompany ofCompany ofCompany of

St. Petersburg

Carbon, Carbon-Manganese 140Rolled BilletsSemi-Finished

carbon, carbon-manganese, Normal Strength 300Billets

37, Promyshlennaya Str.BY- 247210 Zhlobin,

"Byelorussian Metallurgical Company" holding"(OJSC "BSW -management company of "BMC" holding")

Tel No: +375 2334 56180 Fax no: +375 2334 56317 Mob +375 291105030Email : mailo:[email protected]: xxxxxxxxxxxxxxxxCertificate No: MD00/4297/0001/1 Expiry date 05/03/2017

Gomel Region,







BelgiumBelgiumBelgiumBelgium

austenitic stainlessE.A.F./A.O.D./Con CastSteelmakingAPERAM GenkAPERAM GenkAPERAM GenkAPERAM Genk Antwerpaustenitic stainlessB.O.S/V.O.D./Con Castaustenitic stainless 200SlabsSemi-Finished304L, 304LN, 316L, 316LN, 317L, 317LN, 321,347

14Austenitic StainlessPlates

Swinnenwijerweg 5Genk - Zuid, Zone 6A

Tel: +32 89 30 25 68 Fax: +32 89 30 25 53 Email: [email protected] #: MD00/3423/0003/1 Expiry date: 29/01/2014

B-3600 Genk

As belowE.A.F. / Con CastSteelmakingESB sprlESB sprlESB sprlESB sprl Antwerpcarbon, carbon-manganese, alloy, FerriticStainless Steel*

600BloomsSemi-Finished

Rue de l'Environnement, 8B - 4100

ENGINEERING STEEL BELGIUM

Tel No: +32 4 33 885 60 Fax No: +32 4 33 809 00Email : [email protected] : www.esb.beCertificate No: MD00/3858/0002/1 Expiry date: 09/11/2016Materials Suitable for Steel Forgings, Pipe and Tube, Ingots up to 800mm diameter and Blooms up to 600 mm diameter

Seraing

As belowE.A.F. / Con CastSteelmakingINDUSTEEL BELGIUM SAINDUSTEEL BELGIUM SAINDUSTEEL BELGIUM SAINDUSTEEL BELGIUM SA AntwerpA, B, D, E 50Normal StrengthPlatesAH32, AH36, DH32, DH36, EH32, EH36, EH40 50Higher StrengthDH42, DH46, DH50, DH55, DH62, DH69, EH42,EH46, EH50, EH55, EH62, EH69, FH42, FH46,FH50, FH55, FH62, FH69

100

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, 5Ni, 9Ni

50Ferritic Low Temperature

304L, 304LN, 316L, 316LN 50Austenitic StainlessUNS S31803(MOD)* 40Duplex Stainless

266, Rue de ChâteletB-6030 Charleroi

ARCELOR MITTAL GROUP

Tel: +32 71 44 14 51 Fax: +32 71 44 19 29 Email: mailto:[email protected] Web: http://www.arcelormittal.comPlates in grades LTAH32; LTAH36; LTDH32; LTDH36; LTEH32; LTEH36; 5%Ni; 9%Ni over 40mm thickness and up to the maximum thickness stated above areaccepted for approved applications only.* accepted for approved applications.Higher strength grades supplied in the quenched and tempered grades are accepted with specified through thickness properties designation Z35.Certificate Number: MD00/0477/0009/1 Expiry: 09/07/2014

A, B, D, E 120Normal StrengthPlatesNLMK CLABECQ S.A.NLMK CLABECQ S.A.NLMK CLABECQ S.A.NLMK CLABECQ S.A. AntwerpAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

120Higher Strength

360AR, 410AR 25Boiler & Pressure Vessel360, 410 50360FG, 410FG, 460FG, 490FG, 510FG 120

Rue de Clabecq, 101B-1460 IttreTel: +32 (0) 2 3919227 Fax: +32 (0)2 3919883 Email:[email protected] Web:http://www.eu.nlmk.comMQS Approved - Approval No. MQS016Certificate #: MD00/2204/0011/1 Expiry date: 24.06.2015







BrazilBrazilBrazilBrazil

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingARCELORMITTAL BRAZIL S/AARCELORMITTAL BRAZIL S/AARCELORMITTAL BRAZIL S/AARCELORMITTAL BRAZIL S/A(ARCELORMITTAL TUBARÃO )(ARCELORMITTAL TUBARÃO )(ARCELORMITTAL TUBARÃO )(ARCELORMITTAL TUBARÃO )

Rio de Janeiro

carbon, carbon-manganese 250SlabsSemi-Finished

D 16Normal StrengthHot Rolled Coil

A, B 19

AH27S, AH32 16Higher Strength

460FG, 490FG 16Boiler & Pressure Vessel

360FG, 410FG 19

930 - Jardim Limoeiro29164-970 Serra/ES

Av. Brigadeiro Eduardo Gomes

Carbon and carbon-manganese grades cover the following LR normal and higher tensile strength grades. A, B, D, E, AH27S, AH32, AH36, DH27S, DH32,DH36, EH27S, EH32, EH36Tel: +55 27 3348 3261 Fax: +55 27 3348 2211 Email : mailto:[email protected]: http://www.arcelormittal.com/br/Certificate #: MD00/0342/0008/1 Expiry date: 01/07/2014

As belowB.O.S./Ingot/Con CastSteelmakingGERDAU AÇOMINAS S.A.GERDAU AÇOMINAS S.A.GERDAU AÇOMINAS S.A.GERDAU AÇOMINAS S.A. Rio de JaneiroCarbon, Carbon-Manganese, Alloy 180Rolled BilletsSemi-Finishedcarbon, carbon-manganese, alloy 250Slabscarbon, carbon-manganese, alloy 300Bloomscarbon, carbon-manganese, alloy 180BilletsCarbon, Carbon-Manganese, Alloy 450Rolled SlabsCarbon, Carbon-Manganese, Alloy 900Rolled Blooms

Rodovia MG-443 KM 7Fazenda do Cadete

Tel: +55 3137 493471 Fax: +55 3137 3215 Email: mailto:[email protected] web http://www.gerdau.com.brSlabs and blooms intended for plates and forgingsCertificate #: MD00/2071/0006/1 Expiry date: 26/02/2015

36420-000-Ouro Branco-MG

As belowE.A.F. / IngotSteelmakingGERDAU S/AGERDAU S/AGERDAU S/AGERDAU S/A São Paulocarbon, carbon-manganese 4Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 125MachineryBarsR3 117Chain Cable StockU1, U2, U3 125

Rod.Luiz Dumont Villares km 2- Moreira CésarCEP 12442-260

Pindamonhagaba Plant

Tel: +55 12 2126 7174 Fax: +55 12 2126 7325 Email: mailto:[email protected] Web:http://www.gerdau.com.brBars for grade R3 chain cable is restricted to supply to Companhia Brasileira Amarras with specification EC-Gr.3a.Ingots as semi-finished products to the above maximum weight nominal 630mm x 530mm x 2150mm long are accepted for further processing for rolledproducts.Certificate #: MD00/2867/0006/1 Expiry date: 24/03/2014

Pindamonhangaba S.P.

As belowB.O.S. / Con CastSteelmakingUSIMINASUSIMINASUSIMINASUSIMINAS Rio de JaneiroA, B, D, E 50Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50A 12Normal StrengthHot Rolled Coil360, 410 12Boiler & Pressure Vessel

Av. Pedro Linhares Gomes, 5431Distrito Usiminas, CEP 35160-900

Usinas Siderúrgicas de Minas Gerais S/AUsina Intendente Câmera

Tel +55 (0)31 38293136 Fax +55 (0)31 38293516 Email: mailto:[email protected] and Z35 through thickness properties for plates of approved grades in the TM+Acc and TM+Acc+Temper conditionsMaterials Quality Scheme Approved - MQS014Certificate #: MD00/1603/0007/1 Expiry date: 24/06/2014

Ipatinga, Minas Gerais







As belowB.O.S. / Con CastSteelmakingUSINAS SIDERÚRGICAS DE MINAS GERAIS S.A. -USINAS SIDERÚRGICAS DE MINAS GERAIS S.A. -USINAS SIDERÚRGICAS DE MINAS GERAIS S.A. -USINAS SIDERÚRGICAS DE MINAS GERAIS S.A. -USIMINASUSIMINASUSIMINASUSIMINAS

São Paulo

A, B, D, E 80Normal StrengthPlates

AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

80Higher Strength

360AR, 410AR 40Boiler & Pressure Vessel

360FG, 410FG, 460FG, 490FG, 510FG 80

Rodovia Cônego Domênico Rangoni, Km 6Vila da Indústrias 11573-900

Tel: +55 13 3362-2978 Fax: +55 13 3362-3775 Email: mailto: [email protected] Web:http://www.usiminas.comSpecified through thickness properties for plates in the normalised condition, rolled from ingots, up to 35 mm thickness.Specified through thickness properties for plates of grades up to DH32 and thickness up to 26mm in the normalised condition, rolled from continuously castslab.Material Quality Scheme approved, MQS 044Certificate #: MD00/1193/0008/1 Expiry date: 29/09/2014

Cubatão - São Paulo

BulgariaBulgariaBulgariaBulgaria

As belowE.A.F. / Con CastSteelmakingSTOMANA INDUSTRY ADSTOMANA INDUSTRY ADSTOMANA INDUSTRY ADSTOMANA INDUSTRY AD SofiaAs below 200Blooms/BilletsSemi-FinishedA 40Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 40Higher Strength360AR, 410AR 25Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 40

1, Vladaysko Vastanie Str.2304 PernikTel: +359 894 751 381 Fax: +359 766 81952email:[email protected] web: www.stomana.bgCertificate #: MD00/1868/0009/1 Expiry date: 16/04/2016

CanadaCanadaCanadaCanada

As belowB.O.S. / Con CastSteelmakingESSAR STEEL ALGOMA INC.ESSAR STEEL ALGOMA INC.ESSAR STEEL ALGOMA INC.ESSAR STEEL ALGOMA INC. Torontocarbon, carbon-manganese 205SlabsSemi-FinishedD, E 50Normal StrengthPlatesA, B 60AH32, AH36, DH32, DH36, EH32, EH36 65Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 65Boiler & Pressure Vessel

Sault Ste. MarieOntario

105 West Street

Tel +1 705 945 2347 Fax: +1 705 945 2632 e-mail: [email protected] web: www.essarsteelalgoma.com

Certificate #: MD00/0092/0008/1 Expiry date: 05/05/2017

P6A 5P2

As belowE.A.F. / Con CastSteelmakingGERDAU AMERISTEEL WHITBYGERDAU AMERISTEEL WHITBYGERDAU AMERISTEEL WHITBYGERDAU AMERISTEEL WHITBY TorontoA, B 15Normal StrengthSectionsAH27S, AH32, AH36 15Higher Strength

WhitbyOntario L1N 5T1

Hopkin Street South

CSA grades 260W, 300W and 350W may be accepted for approved applications as equivalent to the appropriate Lloyd's Register grade stated above.

Tel: +1 905 668 8811 ext 2744 Fax: +1 905 668 9361 Email: mailto:[email protected] Web: http://www.gerdauameristeel.comCertificate #: MD00/0322/0007/1 Expiry date: 31/01/2014

As belowE.A.F. / Con CastSteelmakingGERDAU LONG STEEL NORTH AMERICAGERDAU LONG STEEL NORTH AMERICAGERDAU LONG STEEL NORTH AMERICAGERDAU LONG STEEL NORTH AMERICA TorontoA 26Normal StrengthSections

Cambridge,Ontario,

CAMBRIDGE MILL160 Orion Place,

Tel: +1 519 740 2488 ext 1420 Fax: +1 519 623 2062email: [email protected] web: www.gerdaul.com/longsteelCertificate #: MD00/3046/0004/1 Expiry date: 31/01/2016

N1T 1R9







China, People's Republic ofChina, People's Republic ofChina, People's Republic ofChina, People's Republic of

A, B, D, E 100Normal StrengthPlatesANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITED DalianAH42, AH46, AH50, AH55, DH42, DH46,DH50, DH55, EH42, EH46, EH50, EH55, FH42,FH46, FH50, FH55

80Higher Strength

AH27S, AH32, AH36, DH27S, DH32, DH36,DH40, EH27S, EH32, EH36, EH40, FH27S,FH32, FH36, FH40

100

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 501.5Ni, 3.5Ni, 5Ni, 9Ni 40Ferritic Low Temperature

Honqi Road, Lishan District,Anshan City,

HEAVY PLATE MILL OF MEDIUM AND HEAVY PLATE PLANT

Tel: +86 412 673 4836 Fax: +86 412 672 5766 Email mailto:[email protected] Web http://www.ansteel.con.cnAll grades and thicknesses accepted with specified through thickness properties, Z25 and Z35 designations.Certificate Number: MD00/1869/0009/1 Expiry: 23/03/2015

Liaoning Province

As belowB.O.S. / Con CastSteelmakingANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITED DalianNormal strength, Higher Strength 300SlabsSemi-FinishedA, B, D 40Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 40Higher Strength360AR, 410AR 20Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 40

Anshan CityLiaoning Province

MEDIUM PLATE MILL OF MEDIUM AND HEAVY PLATE PLANTAngang Area

Tel +86 0412 675 1030 Fax +86 0412 675 2819 Email mailto:[email protected] as semi finished products nominal 2000mm width x nominal 7000mm length to the above maximum thickness are approved for further processing forrolled products.Certificate No. MD00/2757/0007/1 Expiry date: 23/10/2014

A, B, D 20Normal StrengthHot Rolled CoilANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITED DalianAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

20Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 20Boiler & Pressure Vessel

HOT STRIP MILL OF ANGANG STEEL COMPANY LIMITEDAngang Production Area,Tiexi District

Tel: +86 412 6757143 Fax: +86 412 6753575Email: [email protected] http://www.ansteel.com.cnCertificate #: MD00/3301/0003/1 Expiry date: 02/01/2016

114024

As belowB.O.S. / Con CastSteelmakingANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITEDANGANG STEEL COMPANY LIMITED Daliancarbon-manganese, carbon, carbon manganese 250Blooms/BilletsSemi-FinishedA, B, D, E 40Normal StrengthPlatesAH32, AH36, AH40, DH32, DH36, DH40, EH32,EH36, EH40

40Higher Strength


115000 BayuquanYingkou City

BAYUQUAN 5500 HEAVY PLATE MILL

Tel: +86 412 6334292 Fax: +86 412 6722093 Web: www.ansteel.com.cnCertificate No. MD00/3595/0003/1 Expiry date: 10/05/2015

Liaoning Province

As BelowB.O.S./E.A.F./Con CastSteelmakingANYANG IRON & STEEL CO., LTD.ANYANG IRON & STEEL CO., LTD.ANYANG IRON & STEEL CO., LTD.ANYANG IRON & STEEL CO., LTD. WuhanNormal strength 230SlabsSemi-FinishedA, B, D 40Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 36Higher Strength360AR, 410AR, 460FG, 490FG, 510FG 36Boiler & Pressure Vessel360FG, 410FG 40A, B 12Normal StrengthSections

Anyang CityHenan Province

Yindu District

Tel: +86 372 3120163 Fax: +86 372 3120146 email: [email protected]: www.anyang.com.cnCertificate #: MD00/2200/0009/1 Expiry date: 19/01/2016







As belowB.O.S. / Con CastSteelmakingBAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD. Shanghai PortAs belowB.O.S. / Ingotcarbon, carbon-manganese 500SlabsSemi-Finishedcarbon, carbon-manganese, Alloy 500Blooms/BilletsA, B, D, E 130Normal StrengthPlatesAH42, AH46, AH50, AH55, DH42, DH46,DH50, DH55, EH42, EH46, EH50, EH55

50Higher Strength

AH40, DH40, EH40, FH27S, FH32, FH36, FH40 68AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100

360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure VesselLTAH40, LTDH40, LTEH40, LTFH27S, LTFH32,LTFH36, LTFH40


LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36

80

A, B, D 22Normal StrengthHot Rolled CoilAH32, AH36 12Higher Strength460FG, 490FG, 510FG 12Boiler & Pressure Vessel360FG, 410FG 22

No 885, Fujin RoadBaoshan District

Core Base

Tel +86 21 2664 8888 Fax +86 21 2664 8000 Web:http://www.baosteel.comIncluding all plate grades and thicknesses with specified through thickness properties (Z35)


Materials Quality Scheme Approved - MQS 038

Shanghai 201900

As belowB.O.S. / Con CastSteelmakingBAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD.BAOSHAN IRON & STEEL CO., LTD. Shanghai Portcarbon, carbon-manganese 250SlabsSemi-FinishedA, B, D, E 60Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

460FG, 490FG, 510FG 50Boiler & Pressure Vessel360FG, 410FG 60

Baoshan DistrictShanghai 200949

Core Base Plate Line No. 2No. 777 North Wenchuan Road

Tel +86 21 266488888 Fax +86 21 2664 8000 Email: to: [email protected] Web:http://www.baosteel.com

Semi-finished products in carbon, carbon-manganese fine grain (element combinations as stated, slabs to 2300mm wide, to 12000mm long to 54 tonnes forfurther processing to rolled products

Z25 & Z35 designations made be added for plates up to 35mm thick produced in the as rolled condition from concast slab for grades A, B and D withspecified through thickness properties

Z25 & Z35 designations made be added for plates with specified through thickness properties for the approved grades in the normalised condition, normalisedrolled condition, TM condition and TM +Acc condition

Z25 & Z35 designations made be added for plates up to 40mm thick produced in the normalised rolled condition from concast slab for grades DH36 and DH32with specified through thickness properties

Certificate No. MD00/3489/0007/1 Expiry date: 15/12/2014

Materials Quality Scheme Approved - MQS 051

As belowB.O.S. / Con CastSteelmakingBENGANG STEEL PLATES CO., LTD.BENGANG STEEL PLATES CO., LTD.BENGANG STEEL PLATES CO., LTD.BENGANG STEEL PLATES CO., LTD. Daliancarbon, carbon-manganese 220SlabsSemi-FinishedA, B 20Normal StrengthHot Rolled CoilA, B 20Normal StrengthPlates from coils

No. 18, Gangtie Road, Pingshan DistrictBenxi City

Tel 0414 7827678 Fax: 0414 7827814 Email:[email protected] #: MD00/3311/0003/1 Expiry date: 28/01/2013

Liaoning Province

A, B, D 14Normal StrengthSectionsCHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,LTD.LTD.LTD.LTD.

Jiangyin

AH27S, AH32, AH36 14Higher Strength







Meili TownChangshu City

No. 9 Jusha Road

Tel: +86 0512 5206 1085 Fax: +86 0512 5266 1141 Email: mailto: [email protected] Web: http://www.lttg.cnCertificate #: MD00/3275/0004/1 Expiry date: 10/10/2015 #ENHANCED SURVEY#

Jiangsu Province 21551

As belowE.A.F. / Con CastSteelmakingCHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,CHANGSHU LONGTENG SPECIAL STEEL CO.,LTD.LTD.LTD.LTD.

Jiangyin

carbon, carbon-manganese, alloy 26Ingots (tonnes)Semi-Finished

Normal Strength, Higher Strength 260Blooms

A, B 20Normal StrengthSections


Tonggang Industrial Park,Meili Town, Changshu City,

118 Hualian Road,

Tel.:+86 512 5266 1284 Fax.: +86 512 52661284 Email: mailto: [email protected] Web: http://www.lttg.cnBlooms as semi finished products nominal 340mm width x nominal 12000mm length to the above maximum thickness are approved for further processing forrolled products.Certificate #: MD00/3976/0001/1 Expiry date: 08/12/2014


As belowB.O.S. / Con CastSteelmakingCISCOCISCOCISCOCISCO WuhanNormal strength, Higher Strength 300SlabsSemi-FinishedA, B, D, E 80Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

80Higher Strength

360AR, 410AR, 460AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG 80

Changshou DistrictChongqing

Chongqing Iron and Steel Co., Ltd.Jiangnan Town (4100 Mill)

Tel: +86 23 6887 3543 Fax: +86 23 6887 3543Email: [email protected] Web: http://www.cggfCertificate Number: MD00/3763/0006/1 Expiry date: 28/03/2016

A, B, D, E 40Normal StrengthPlatesCISCOCISCOCISCOCISCO WuhanAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

40Higher Strength

360AR, 410AR, 360FG, 410FG, 460FG, 490FG,510FG

40Boiler & Pressure Vessel

Chongqing Iron and Steel Co., Ltd.Jiangnan Town (2700 Mill)Tel: +82 623 6887 3543 Fax: +82 623 6887 3543 Email: [email protected] Web: http://www.cggfPlates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to all Grades and supply conditions.Certificate Number: MD00/3982/0002/1 Expiry: 26/01/2015

As belowB.O.S. / Con CastSteelmakingDAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD.DAYE SPECIAL STEEL CO., LTD. WuhanAs belowE.A.F./Ingot/Con Castcarbon, carbon-manganese, alloy 40Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 410Billetscarbon, carbon-manganese, alloy 650Barscarbon, carbon-manganese 190StructuralBarscarbon, carbon-manganese, alloy 190MachineryU1, U2, API-2F 110Chain Cable StockU3, R3S, R4 160

Huangshi CityHubei Province

316 Huangshi Avenue

Tel: +86 714 629 7888 Fax: +86 714 629 7781 Email: [email protected] Web: http://www.dayesteel.com.cn

Mooring grade bars (grade R4) are restricted to supply to Zhengmao Group Co., Ltd.Mooring grade bars (grade R3S) are restricted to supply to Foshan Marine Anchor Chain Ltd. (FMAC)

Certificate Number: MD00/2493/0008/1 Expiry: 13/08/2014

Post code: 435001

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUP Daliancarbon, carbon-manganeseE.A.F./Ingot/Con Castcarbon, carbon-manganese 5Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 280Blooms/Billetscarbon, carbon-manganese 200Barscarbon, carbon-manganese 200StructuralBarsU1, U2, U3 130Chain Cable Stock







Qiqihar CityHeilongjiang Province

BEIMEN SPECIAL STEEL CO., LTD.Fularji District

Tel: +86 452 6801920 Fax: +86 452 6801496 Email: mailto:[email protected] #: MD00/2907/0001/1 Expiry date: 30/07/2014

Carbon, Carbon-manganese, Alloy 27EAF/LRF/VD/IngotSteelmakingDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUPDONGBEI SPECIAL STEEL GROUP Daliancarbon, carbon-manganese, alloy 27Ingots (tonnes)Semi-Finished

Wanghua District,Fushun City,

FUSHUN SPECIAL STEEL CO. LTD.,East No 8 Anshan Road,

Tel No: +86 413 668 9161-3668 Fax no: +86 413 6674090Email: Web: www.dtsteel.comCertificate No MD00/3945/0001/1

Liaoning Province

As belowB.O.S. / Con CastSteelmakingFUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,FUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,FUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,FUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,LTD.LTD.LTD.LTD.

Guangzhou

Normal strength, Higher Strength 250SlabsSemi-Finished

A, B 36Normal StrengthPlates

AH27S, AH32, AH36, DH27S, DH32, DH36 30Higher Strength


360, 410 36

Middle Gongyezhong RoadMeilie District

Tel: +86 598 8205936 Fax: +86 598 8205138Email: [email protected] Web: www.fjsg.com.cnCertificate #: MD00/3587/0004/1 Expiry date: 27/04/2015

Sanming CityFujian Province

As belowB.O.S. / Con CastSteelmakingGUANGXI LIUZHOUGUANGXI LIUZHOUGUANGXI LIUZHOUGUANGXI LIUZHOU GuangzhouA, B 36Normal StrengthPlatesAH27S, AH32, AH36 36Higher StrengthA, B 12Normal StrengthHot Rolled Coil

117 BeiqueLiuzhou

IRON & STEEL (GROUP) COMPANY

Tel: +86 (0)772 2592132 Fax: +86 (0)772 2592784 Email mailto:[email protected] Web http://www.liuzousteel.comCertificate #: MD00/2632/0006/1 Expiry date: 02/01/2015

Guangxi

As belowB.O.S. / Con CastSteelmakingHANBAO IRON & STEEL CO. LTD (HANSTEELHANBAO IRON & STEEL CO. LTD (HANSTEELHANBAO IRON & STEEL CO. LTD (HANSTEELHANBAO IRON & STEEL CO. LTD (HANSTEELGROUP)GROUP)GROUP)GROUP)

Wuhan


A, B, D 18Normal StrengthHot Rolled Coil


A, B, D 18Normal StrengthPlates from coils

AH27S, DH27S, AH32, DH32, AH36, DH36 18Higher Strength

232,Fuxing Road,Handan,

Tel +86 310 6073275 Fax No. + 86 310 6072241Email [email protected] www.hgjt.com.cnCertificate No MD00/3874/0002/ 1 Expiry Date 09/01/2017

Hebei. 056015

As belowB.O.S. / Con CastSteelmakingHEBEI IRON & STEEL CO., LTD.HEBEI IRON & STEEL CO., LTD.HEBEI IRON & STEEL CO., LTD.HEBEI IRON & STEEL CO., LTD. WuhanNormal strength, Higher Strength 220SlabsSemi-FinishedA, B, D, E 50Normal StrengthPlatesAH27S, DH27S, EH27S 38Higher StrengthAH32, AH36, DH32, DH36, EH32, EH36 50360AR, 410AR 25Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50







Handan CityHebei Province

Handan Branch232 Fuxing Road

Tel: +86 310 607 2202 Fax: +86 310 607 2241 Email mailto:[email protected] Web: http://www.hgjt.com.cnSlabs as semi-finished products nominal 1800mm width x nominal 3200mm length to the above maximum thickness are approved for further processing forrolled products.Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied for approved grades supplied in the normalizedconditionCertificate Number: MD00/1970/0009/1 Expiry: 04/03/2016

056015

As below 220B.O.S. / Con CastSteelmakingHEBEI JINGYE CUT DEAL CO. LTD.,HEBEI JINGYE CUT DEAL CO. LTD.,HEBEI JINGYE CUT DEAL CO. LTD.,HEBEI JINGYE CUT DEAL CO. LTD., DalianNormal strength, Higher Strength 220SlabsSemi-FinishedA, B, D 30Normal StrengthPlatesAH27S, AH32, AH36, DH32, DH36 30Higher Strength

Pingshan CountyShijiazhuang City

Nandian Town

Tel No +86 311 8287 3953 Fax No +86 311 82873988 Mob +86 158 3111 8888Email [email protected] www.hbjyjt.comCertificate No MD00/4022/0001/1 Expiry Date 09/05/2015

Hebei Province

As belowE.A.F. / Con CastSteelmakingHEBEI JITAI SPECIAL STEEL GROUP CO., LTD.HEBEI JITAI SPECIAL STEEL GROUP CO., LTD.HEBEI JITAI SPECIAL STEEL GROUP CO., LTD.HEBEI JITAI SPECIAL STEEL GROUP CO., LTD. DalianA, B, D 20Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher StrengthA, B 38Normal StrengthBarsAH27S, AH32, AH36, DH27S, DH32, DH36 38Higher Strength

Lincheng CountyXingtai City

Feng Village

Tel +86 319 7018893 Fax +86 319 3033326 Email: mailto:[email protected] Web: htpp://www.jitaichina.cnCertificate #: MD00/3116/0007/1 Expiry date: 07/11/2013

As belowE.A.F. / Con CastSteelmakingHENGYANG VALIN STEEL TUBE CO., LTD.HENGYANG VALIN STEEL TUBE CO., LTD.HENGYANG VALIN STEEL TUBE CO., LTD.HENGYANG VALIN STEEL TUBE CO., LTD. Wuhancarbon, carbon-manganese 330BilletsSemi-Finished

Hengyang CityHunan Province 421001

No. 10 Dalixincun

Tel: +86 734 8872311 Fax: +86 734 8873769 Email: [email protected]: www.hysteeltube.comCertificate #: MD00/3098/0002/1 Expiry date: 05/08/2016

As belowB.O.S. / Con CastSteelmakingHUNAN VALIN LIANYUAN STEEL CO., LTD.HUNAN VALIN LIANYUAN STEEL CO., LTD.HUNAN VALIN LIANYUAN STEEL CO., LTD.HUNAN VALIN LIANYUAN STEEL CO., LTD. Wuhancarbon, carbon-manganese 230SlabsSemi-FinishedA, B, D 25Normal StrengthHot Rolled CoilA, B, D 25Normal StrengthPlates from coils

Huangnitang, LoudiHunan Province

Tel +738 8661473 Fax +7388663570Email: [email protected]: www. lysteel.comCertificate #: MD00/3999/0001/ Expiry date: 06/03/2015

Post Code: 417009

As belowE.A.F. / IngotSteelmakingINNER MONGOLIA NORTHINNER MONGOLIA NORTHINNER MONGOLIA NORTHINNER MONGOLIA NORTH Wuhancarbon, carbon-manganese, alloy 8Ingots (tonnes)Semi-Finished

Baotou CityInner Mongolia

HEAVY INDUSTRIES GROUP CO., LTD.Binggong Road, Qingshan District

Tel No:+86 742 338 6297 Fax No: +86 742 334 0042Email: [email protected] http://www.bfzg.comIncluding semi-finished as-forged bars to 8.5 tonnes in carbon, carbon-manganese and alloy steel for further process of forge

Certificate No: MD00/3099/0005/1 Expiry date: 07/08/2016

014033

As belowB.O.S. / Con CastSteelmakingJIANGSU SHAGANG GROUPJIANGSU SHAGANG GROUPJIANGSU SHAGANG GROUPJIANGSU SHAGANG GROUP NanjingAs belowE.A.F. / Con Castcarbon, carbon-manganese 200BloomsSemi-Finishedcarbon, carbon-manganese 150Billetscarbon, carbon-manganese 500Barscarbon, carbon-manganese 100StructuralBarscarbon, carbon-manganese 100MachineryU2 140Chain Cable StockU3 210







Huai'an CityJiangsu Province

HUAIGANG SPECIAL STEEL CO., LTDNo. 188 South Xi'an Road

Tel: +81 517 83036135 Fax: +81 517 83631344 Email:[email protected] Web: http://www.huaigang.comThe approval for rolled bars over 60mm diameter is for steel manufactured by the B.O.S. / Con Cast route.Bars for chain cable stock are intended for final heat treated conditions; Grade U2 normalized; Grade U3 quenched and tempered.Chain cable stock bars may be accepted up to 250mm diameter may be accepted for further processing for forged chain cable fittings.Blooms, billets and bars as semi finished-products are approved for further processing for rolled products; blooms nominal maximum width 200mm x nominalmaximum length 12000mm; billets nominal maximum width 150mm x nominal maximum length 12000mm; bars nominal maximum length 12000mm; to theabove maximum thicknesses.Certificate Number: MD00/3240/0005/1 Expiry: 13/06/2015

As belowB.O.S. / Con CastSteelmakingJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTD Jiangyincarbon, carbon-manganese 320SlabsSemi-Finished

Jinfeng TownZhangjiagang City

Hongfa Steel PlantSteelmaking Plant Number 1

Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: [email protected] Web http://www.sha-steel.comApproval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.Certifcate Number: MD00/3127/0007/1 Expiry date: 27/10/2016


A, B, D, E 100Normal StrengthPlatesJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTD JiangyinAH27S, AH32, AH36, AH40, AH42, AH46,AH50, AH55, AH62, AH69, DH27S, DH32,DH36, DH40, DH42, DH46, DH50, DH55,DH62, DH69, EH27S, EH32, EH36, EH40, EH42,EH46, EH50, EH55, EH62, EH69, FH27S, FH32,FH36, FH40, FH42, FH46, FH50, FH55, FH62,FH69

100Higher Strength

360AR, 410AR, 460AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 100

Hongfa Steel PlantSteel Plate Mill Line No. 1

Tel +86 0512 58568791 Fax: +86 0512 58558900 Email: mailto:[email protected] Web: http://www.sha-steel.com Plates in Grades A and B Fine Grain Al+Ti in the Normalising Rolled condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to60.0mm.Plates in Grades D and E Fine Grain Al+Ti+Nb in the TM+Acc condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to 60.0mm.Plates in the Normalizing Rolled condition and the TM+Acc condition are restricted to a maximum width of 4150mm.Plates in the quenched and tempered supply condition >70mm thickness are accepted for approved applications only.Plates in higher strength grades AH32 and AH36 as rolled 2800 wide x 11,000 longCertificate No. MD00/3388/0008/1 Expiry date: 27/10/2016

Jiangsu Province, 215625

A, B, D, E 60Normal StrengthPlatesJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTD JiangyinAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40,FH27S, FH32, FH36, FH40

60Higher Strength

360AR, 410AR, 460AR, 360FG, 410FG, 460FG,490FG, 510FG


Hongfa Steel PlantSteel Plate Mill Line No. 2Tel +86 0512 5856 8791 Fax: +86 0512 5855 8900 Email: mailto:[email protected] Web: http://www.sha-steel.com Plates in the Normalizing Rolled are restricted to a maximum width of 4650mm condition and in the TM+Acc condition are restricted to a maximum width of4150mm.Plates in the Normalizing Rolled condition and the TM+Acc condition are restricted to a maximum width of 4150mm.Plates in AH32 and AH36 as rolled 2800 x 11,000 and approved in the "as welded"conditionCertificate No. MD00/3913/0005/1 Expiry date: 27/10/2016

As belowB.O.S. / Con CastSteelmakingJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTDJIANGSU SHAGANG GROUP CO., LTD Jiangyincarbon, carbon-manganese 320SlabsSemi-Finished

Hongfa Steel PlantSteelmaking Plant Number 2

Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: [email protected] Web http://www.sha-steel.comApproval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.Certifcate Number: MD00/3127/0005/1 Expiry date: 24/05/2014


As belowE.A.F. / IngotSteelmakingJIANGSU SUNAN SPECIAL EQUIPMENT GROUPJIANGSU SUNAN SPECIAL EQUIPMENT GROUPJIANGSU SUNAN SPECIAL EQUIPMENT GROUPJIANGSU SUNAN SPECIAL EQUIPMENT GROUPCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Jiangyin








TONGGANG ROADCHANGSHU

WEST OF BAI DANGQIAO

Tel: +86 512 5263 1888 / 1908 Fax: +86 512 5263 7910 email: [email protected] Web: http://snzbjt.comIngots as semi finished products nominal 1170/1290mm diameter x nominal 3000mm long to the above maximum weight are approved for further processingfor forgingsCertificate Number: MD00/3583/0003/1 Expiry: 29/04/2015

JIANGSU

A, B 30Normal StrengthSectionsJIANGYIN BOFENG IRON & STEEL CO., LTD.JIANGYIN BOFENG IRON & STEEL CO., LTD.JIANGYIN BOFENG IRON & STEEL CO., LTD.JIANGYIN BOFENG IRON & STEEL CO., LTD. JiangyinAH27S, AH32 30Higher Strength

Huaxicun Industrial ZoneJiangyin City

Tel: +86 510 8621 7672 Fax: +86 510 8621 7672 Email: [email protected] Web: http://www.bofengsteel.cnThe approved sections are in the form of universal flats nominal widths <600mm to the maximum thickness shown above.Certificate Number: MD00/4031/0001/1 Expiry: 06/06/2015

Jiangsu Province

A, B 25Normal StrengthPlatesJIANGYIN CHANGDA STEEL CO., LTD.JIANGYIN CHANGDA STEEL CO., LTD.JIANGYIN CHANGDA STEEL CO., LTD.JIANGYIN CHANGDA STEEL CO., LTD. JiangyinNo. 388, West Binjiang Road,Jiangyin City,

Tel: +86 510 8603 2250 Fax: +86 510-8603 2250 Email: [email protected] Web: http:// www.chdsteel.comPlates are restricted to a maximum width of 2200mm.Certificate Number: MD00/3975/0001/1 Expiry date: 03/11/2014

Jiangsu Province, 214442,

As belowE.A.F. / IngotSteelmakingJIANGYIN HUAQIANG SPECIAL STEELJIANGYIN HUAQIANG SPECIAL STEELJIANGYIN HUAQIANG SPECIAL STEELJIANGYIN HUAQIANG SPECIAL STEEL Jiangyincarbon, carbon-manganese, alloy 32Ingots (tonnes)Semi-Finished

No. 18, Biangang Road,Huaxi, Jiangyin City,

CASTING & FORGING THERMOELECTRIC CO., LTD.

Tel: +86 510 860 60566 Fax: +86 510 860 60512 Email: [email protected] Web: http://www.jyhuaqing.comIngots as semi finished products nominal 1240mm/1320mm diameter x 2770mm long to the above maximum weight are approved for further processing forforgings.Certificate Number: MD00/4013/0001/1 Expiry: 23/04/2015

Jiangsu Province, 214421,

As BelowB.O.S./E.A.F./Con CastSteelmakingJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Jiangyin

Normal strength 250SlabsSemi-Finished

carbon, carbon-manganese, alloy 390Blooms

carbon, carbon-manganese, alloy 900Semi-finished ProductsBars

carbon, carbon-manganese, alloy 180Structural

carbon, carbon-manganese, alloy 180Machinery

R3, R3S, R4 160Chain Cable Stock

U1, U2, U3 180

297, Bin Jiang East RoadJiangyin City

Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:[email protected] Web: http://www.jyxc.com


Jiangsu province 214429

As belowB.O.S. / Con CastSteelmakingJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Jiangyin




50Higher Strength


360FG, 410FG, 460FG, 490FG, 510FG 50

3500 Plate Mill

Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:[email protected] Web: http://www.jyxc.com

Certificate Number: MD00/3857/0006/1 Expiry date: 25/09/2016








A, B, D, E 80Normal StrengthPlatesJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSJIANGYIN XINGCHENG SPECIAL STEEL WORKSCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Jiangyin

DH40, EH40, FH27S, FH32, FH36, FH40 60Higher Strength


80


360FG, 410FG, 460FG, 490FG, 510FG 80

4300 Plate MillTel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:[email protected] Web: http://www.jyxc.comPlates in the Normalizing Rolled and Thermomechanical supply conditions are restricted to 3800mm maximum width. Plates in the TM+Acc supply condition are restricted to thickness from 16mm to the maximum thickness shown above.Z35 designation for through thickness properties may be added to all plates in the above supply conditions.Certificate Number: MD00/3973/0002/1 Expiry date: 10/01/2015

Carbon, Carbon-manganese, Alloy 10EAF/LRF/VD/IngotSteelmakingKOCEL STEEL FOUNDRY CO., LTD.KOCEL STEEL FOUNDRY CO., LTD.KOCEL STEEL FOUNDRY CO., LTD.KOCEL STEEL FOUNDRY CO., LTD. Wuhancarbon, carbon-manganese, alloy 10Ingots (tonnes)Semi-Finished

199#, Tongxin Nan RoadEconomic and technical development District

Tel: 0951 2031028 Fax: 0951 2031218email: [email protected] web: www.kocel.com

Certificate No. MD00/3515/0002/1 Expiry Date: 22/04/2017

Yinchuan, Ningxia

304L, 316L 80Austenitic StainlessPlatesKUNSHAN DAEKYUNG STAINLESS STEEL CO.,KUNSHAN DAEKYUNG STAINLESS STEEL CO.,KUNSHAN DAEKYUNG STAINLESS STEEL CO.,KUNSHAN DAEKYUNG STAINLESS STEEL CO.,LTDLTDLTDLTD

Shanghai Port

Kunshan Economy Technology Development ZoneKunshan

No. 66 Longdeng Road

Tel:+86 512 57900998 Fax: +86 512 57700372Email: [email protected] #: MD00/3479/0002/1 Expiry date: 08/06/2014

Jiangsu Province

As belowB.O.S. / Con CastSteelmakingLAIWU STEEL GROUP LTD. YINSHAN SECTIONLAIWU STEEL GROUP LTD. YINSHAN SECTIONLAIWU STEEL GROUP LTD. YINSHAN SECTIONLAIWU STEEL GROUP LTD. YINSHAN SECTIONSTEEL CORPORATIONSTEEL CORPORATIONSTEEL CORPORATIONSTEEL CORPORATION

Qingdao

As below 300SlabsSemi-Finished

carbon, carbon-manganese 300Billets


DH40, EH40, FH32, FH36, FH40 50Higher Strength

AH32, AH36, DH32, DH36, EH32, EH36 80


360FG, 410FG, 460FG, 490FG, 510FG 80

Gangcheng district,Laiwu,

Shuangyuan Road,

Tel: +86 634 7920316 Fax: +86 634 6820824 email: [email protected] web: www.laigang.net


Shandong

As belowB.O.S. / Con CastSteelmakingMAANSHAN IRON & STEEL COMPANY LIMITEDMAANSHAN IRON & STEEL COMPANY LIMITEDMAANSHAN IRON & STEEL COMPANY LIMITEDMAANSHAN IRON & STEEL COMPANY LIMITED NanjingNormal strength, Higher Strength 220SlabsSemi-FinishedA, B 25Normal StrengthPlatesAH32, AH36, DH32, DH36 25Higher Strength360AR, 410AR 25Boiler & Pressure Vessel

No.8 Jiuhua West Road,Maanshan City

Tel: +86 555 287 7110 Fax: +86 555 2886 904 Email: mailto:[email protected] http://www.magang.com.cnCertificate #: MD00/0965/0007/1 Expiry date: 08/10/2015

Anhui Province PC:243000

As belowB.O.S. / Con CastSteelmakingMINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,LTD.LTD.LTD.LTD.

Dalian









China, People's Republic ofChina, People's Republic ofChina, People's Republic ofChina, People's Republic ofAH27S, DH27S, EH27S 40Higher StrengthPlatesMINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,MINMETALS YINGKOU MEDIUM PLATE CO.,

LTD.LTD.LTD.LTD.Dalian

AH32, AH36, DH32, DH36, EH32, EH36 50


360FG, 410FG, 460FG, 490FG, 510FG 50

Laobian DistrictYingkou City

No 1 Fanrong Road, Yejin Street

Tel: 086 (0)417 3256051 Fax: 086 (0)417 3256057 Email mailto:[email protected] :www.wkyg.comPlates with specified through thickness properties in listed grades of normal and higher strength steels.Certificate #: MD00/2585/0006/1 Expiry date: 15/09/2014

Liaoning Province

As belowB.O.S. / Con CastSteelmakingNANJING IRON & STEEL CO., LTD.NANJING IRON & STEEL CO., LTD.NANJING IRON & STEEL CO., LTD.NANJING IRON & STEEL CO., LTD. NanjingAs belowE.A.F. / Con CastNormal strength, Higher Strength 220SlabsSemi-FinishedNormal Strength, Higher Strength 320BloomsNormal Strength, Higher Strength 150BilletsA, B, D, E 60Normal StrengthPlatesAH40, DH40, FH27S, FH32, FH36, FH40 40Higher StrengthAH27S, AH32, AH36, AH42, AH46, AH50,AH55, DH27S, DH32, DH36, EH27S, EH32,EH36, FH42, FH46, FH50, FH55

60

DH42, DH46, DH50, DH55, EH40, EH42, EH46,EH50, EH55

70

AH62, AH69, DH62, DH69, EH62, EH69 80360AR, 410AR, 360, 410 25Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 605Ni 50Ferritic Low TemperatureU1, U2, U3 180Chain Cable StockBars

XieJiaDianLuhe District

Nanjing Works

Tel: +86 25 5707 3657 Fax: +86 25 5707 4341 EMail mailto:[email protected] Web:http://www.njsteel.com.cnPlates with specified through thickness properties may be accepted with the suffix Z35 applied to all approved grades of normal and higher strength steels.Chain cable stock in Grades U2 and U3 is intended for further processing with quenched and tempered heat treatment, bars at 80mm diameter or less areproduced by BOS or EAF steelmaking, bars over 80mm diameter are produced by EAF steelmaking.Billets and blooms as semi finished products to the above maximum thickness, nominal to 480mm width and to nominal 12000mm length are approved forfurther processing for rolled products.Slabs as semi finished products to the above maximum thickness, nominal to 2510mm width and to nominal 4000mm length are approved for furtherprocessing for rolled products.

Certificate Number: MD00/1065/0015/1 Expiry date: 12/10/2016

Nanjing, Post Code: 210035

As belowB.O.S./Ingot/Con CastSteelmakingNANYANG HANYE SPECIAL STEEL CO., LTD.,NANYANG HANYE SPECIAL STEEL CO., LTD.,NANYANG HANYE SPECIAL STEEL CO., LTD.,NANYANG HANYE SPECIAL STEEL CO., LTD., Wuhancarbon, carbon-manganese, alloy 48Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 300SlabsA, B, D 100Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 100Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure Vessel

Xixia County,Nanyang City,

Huiche Town Industry Area,

Tel No: +86 377 697 65211 Fax No: +86 377 697 65333Email: [email protected]: www.elongcheng.comCertificate No: MD00/3969/0001/1 Expiry date 02/01/2015

Henan Province

Alloy 25EAF/LRF/VD/IngotSteelmakingPANGANG GROUPPANGANG GROUPPANGANG GROUPPANGANG GROUP WuhanCarbon, Carbon-manganese 40alloy 25Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 40alloy 25ESR Ingotscarbon, carbon-manganese 300Barsalloy 390carbon, carbon-manganese, alloy 390StructuralBarscarbon, carbon-manganese, alloy 390Machinery







Jiangyou City,Sichuan Province,

JIANGYOU CHANGCHENG SPECIAL STEEL CO., LTD.,No.195, Jiangdong Road,

Tel No: +86 816 365 087 Fax No: +86 816 3650463Email [email protected]: http://www.cssc.com.cnCertificate No: MD00/4201/0001/1 Expiry date: 12/07/2016

621701

See notesB.O.S. / Con CastSteelmakingPANGANG GROUP PANZHIHUA STEEL &PANGANG GROUP PANZHIHUA STEEL &PANGANG GROUP PANZHIHUA STEEL &PANGANG GROUP PANZHIHUA STEEL &VANADIUM CO. LTD.,VANADIUM CO. LTD.,VANADIUM CO. LTD.,VANADIUM CO. LTD.,

Wuhan

See notesSlabsSemi-Finished

See notesBillets

Panzhihua City,Tel No: +86 0812 339 1756 Fax No: +86 0812 339 6014Email: [email protected]: wwwpzhsteel.com.cnCertificate No. MD00/4036/0002/1 Expiry 02/06/2015

As BelowB.O.S./E.A.F./IngotSteelmakingPENGZHOU SANXIN MACHINERYPENGZHOU SANXIN MACHINERYPENGZHOU SANXIN MACHINERYPENGZHOU SANXIN MACHINERYMANUFACTURE Co. Ltd.MANUFACTURE Co. Ltd.MANUFACTURE Co. Ltd.MANUFACTURE Co. Ltd.

Wuhan


No. 49 Mengsan Road, mengyang TownPengzhou City, Sichuan Province

Tel: +86 28 83773044 fAX: +86 28 83773071Certificate #: MD00/3106/0004/1 Expiry date: 30/09/2016

P.C 611934

E 32Normal StrengthPlatesQINHUANGDAO SHOUGANG PLATE MILL CO.,QINHUANGDAO SHOUGANG PLATE MILL CO.,QINHUANGDAO SHOUGANG PLATE MILL CO.,QINHUANGDAO SHOUGANG PLATE MILL CO.,LTD.LTD.LTD.LTD.

Dalian

A, B, D 35


32Higher Strength


360AR, 410AR 35

No. 409 Jianshe StreetQinhuangdao City

Tel: +86 010 88296326 Fax: +86 010 88291295 email: mailto: [email protected] #: MD00/2097/0008/1 Expiry date: 05/07/2015

Hebei Province

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingQINHUANGDAO SHOUQIN METAL MATERIALSQINHUANGDAO SHOUQIN METAL MATERIALSQINHUANGDAO SHOUQIN METAL MATERIALSQINHUANGDAO SHOUQIN METAL MATERIALSCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Dalian


D 50Normal StrengthPlates

A, B 100

AH40 40Higher Strength

DH40, EH27S, EH32, EH36, EH40 50

AH36, DH27S, DH36 80

AH27S, AH32, DH32 100


360, 410 32

510FG 80

360FG, 410FG, 460FG, 490FG 100

Funing CountyQinhuangdao

Duzhuang

Tel +86 0335 6082696 Fax +86 010 6082690 Email: [email protected] http://www.shouqin.com.cnCertificate No: MD00/3136/0007/1 Expiry Date: 05/02/2017All plate grades and thicknesses with through thickness properties, notations Z25 and Z35 may be added.

Hebei Province 066326







As belowB.O.S. / Con CastSteelmakingRIZHAO STEEL WIRE CO., LTDRIZHAO STEEL WIRE CO., LTDRIZHAO STEEL WIRE CO., LTDRIZHAO STEEL WIRE CO., LTD Qingdaocarbon, carbon-manganese 230SlabsSemi-FinishedA, B 25Normal StrengthHot Rolled CoilA, B 25Normal StrengthPlates from coils

No. 600, Yanhai Road, RizhaoShandongTel: +86 633 6188070 Fax: +86 633 6188155email. [email protected] web: www.rizhaosteel.comCertificate #: MD00/3843/0002/1 Expiry date: 04/10/2016

As belowE.A.F. / IngotSteelmakingSANXIN HEAVY INDUSTRY MACHINERY CO.,SANXIN HEAVY INDUSTRY MACHINERY CO.,SANXIN HEAVY INDUSTRY MACHINERY CO.,SANXIN HEAVY INDUSTRY MACHINERY CO.,LTDLTDLTDLTD

Jiangyin


Jiaze,Wujin, Changzhou,

Xia Xi North Road,

Tel No +86 519 83685577 Fax +86 519 83586556Email xxxxxxxxxxxxxxxWeb www.sanxinzg.comCertificate No MD00/4184/0001/1 Expiry Date 18/06/2016

Jiangsu, 213148

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingSGIS SONGSHAN CO., LTDSGIS SONGSHAN CO., LTDSGIS SONGSHAN CO., LTDSGIS SONGSHAN CO., LTD Guangzhoucarbon, carbon-manganese, alloy 270SlabsSemi-Finishedcarbon, carbon-manganese 425Bloomscarbon, carbon-manganese, alloy 170BilletsA, B, D, E 60Normal StrengthPlatesAH40, DH40, EH40 36Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

60

360AR, 410AR 20Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 60U3 150Chain Cable StockBars

Qujiang DistrictShaoguan City

Tel: +86 (0)751 878 5354 Fax: +86 (0)751 878 6066 email [email protected]


CEV is limited to a maximum of 0.45% for as rolled and nomalised higher strength steels but does not apply to TM steels

Guangdong 512123

As belowB.O.S. / Con CastSteelmakingSHANDONG IRON & STEEL CO., Ltd.SHANDONG IRON & STEEL CO., Ltd.SHANDONG IRON & STEEL CO., Ltd.SHANDONG IRON & STEEL CO., Ltd. Qingdaocarbon, carbon-manganese 270SlabsSemi-FinishedE 50Normal StrengthPlatesA, B, D 60AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40, FH32,FH36, FH40

60Higher Strength

360AR, 410AR 25Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 60A, B 12Normal StrengthHot Rolled CoilAH27S, AH32, AH36 12Higher Strength

Jinan, 250101Shandong Province

JINAN COMPANY21, Gongye Bei Road

Tel +86 531 8886 5844 Fax +86 531 8898 2126 email: [email protected] web: www.jigang.com.cnCertificate #: MD00/0799/0013/1 Expiry date: 15/10/2016

As belowB.O.S. / Con CastSteelmakingSHANDONG SHOUGUANG JUNENG SPECIALSHANDONG SHOUGUANG JUNENG SPECIALSHANDONG SHOUGUANG JUNENG SPECIALSHANDONG SHOUGUANG JUNENG SPECIALSTEEL CO, LTD.STEEL CO, LTD.STEEL CO, LTD.STEEL CO, LTD.

Qingdao

Carbon, Carbon-Manganese 310Rolled BilletsSemi-Finished

carbon, carbon-manganese 350Billets

carbon, carbon-manganese 130StructuralBars

carbon, carbon-manganese 130Machinery

U1, U2, U3 130Chain Cable Stock

No. 9 Tegang RoadShouguang, Shangdong Province

Tel +86 532 5186057 Tel+86 532 5186789Certificate #: MD00/3260/0004/1 Expiry date: 22/09/2015

262711







Carbon, Carbon-manganese, Alloy 200EAF/LRF/VD/IngotSteelmakingSHANGHAI HEAVY MACHINERY PLANT CO.,SHANGHAI HEAVY MACHINERY PLANT CO.,SHANGHAI HEAVY MACHINERY PLANT CO.,SHANGHAI HEAVY MACHINERY PLANT CO.,LTD.LTD.LTD.LTD.

Shanghai Port

Minhang DistrictShanghai

1800 Jiangchuan Road

Tel: +86 21 54724065ext 2027 Fax: +86 21 54721007 Email mailto:[email protected] Web http://www.shmp.sh.comIncluding ingots Certificate #: MD00/1345/0001/1 Expiry date: 25/07/2014

200245

As belowE.A.F./A.O.D./Con CastSteelmakingSHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD. Dalian304L, 316L 20Austenitic StainlessPlatesUNS S31803 20Duplex Stainless

Jiancaoping Street No. 2Taiyuan030003Taiyuan

Stainless Steel Hot Rolling Mill

Tel No: +86 351 3012029 Fax No: +86 351 3017893 Mob: 13503502921Email: [email protected] Web: http://tgbx.tisco.com.cn Certificate No. MD00/3185/0006/1 Expiry date: 18/08/2014

As belowB.O.S. / Con CastSteelmakingSHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD. DalianNormal strength, Higher Strength 200SlabsSemi-FinishedA, B, D 25Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 25Higher Strength360FG, 410FG 25Boiler & Pressure VesselA, B, D 25Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36 25Higher Strength410 FG, 360 FG 25Boiler and Pressure Vessel

Jiancaoping Street No. 2Hot Strip Mill

Tel: +86 351 3012029 Fax: +86 351 3017893 Email: [email protected] Web: http: //tgbx.tisco.com.cn Slabs as semi finished products 2310mm nominal width and 12000mm nominal length to the above maximum thickness are approved for further processing forrolled products.Certificate #: MD00/3507/0002/1 Expiry date: 30/07/2014

A, B, D 40Normal StrengthPlatesSHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD. DalianAH32, AH36, DH32, DH36 40Higher Strength304L, 316L, 304*, 316* 60Austenitic StainlessUNS S31803 40Duplex Stainless

Qiaodong Street No.3Linfen City

Linfen Heavy Plate Mill

Tel: +86 351 3017667 Fax: +86 351 3017893 Email: [email protected] Web: http:// www.tisco.com.cn Certificate No MD00/3688/0005/1 Expiry date 07/07/2015

Shanxi Province

Carbon, Carbon-manganese, Alloy 12EAF/LRF/VD/IngotSteelmakingSHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD.SHANXI TAIGANG STAINLESS STEEL CO., LTD. Dalian

No.2 Jian Caoping Street,Taiyuan City,

Section Steel Plant,

Tel: +81 (0)351 3017667 Fax: +81 (0)351 3017893

Certificate No. MD00/4240/0001/1 Expiry Date: 15/10/2016.

Shanxi Province,

As belowE.A.F. / IngotSteelmakingSHI GANG JING CHENG EQUIPMENTSHI GANG JING CHENG EQUIPMENTSHI GANG JING CHENG EQUIPMENTSHI GANG JING CHENG EQUIPMENTDEVELOPMENTDEVELOPMENTDEVELOPMENTDEVELOPMENT

Dalian

carbon, carbon-manganese 132Ingots (tonnes)Semi-Finished

No. 1 East Xinlian StreetAdministrative Committee of Liaoning(Yingkou)

AND MANUFACTURING CO., LTD.

Tel: +86 0417 3257866 Fax: +86 0417 3257860Email: [email protected]: http://www.cyedm.com.cnCertificate #: MD00/4234/0002/1 Expiry date: 09/10/2016

Castal Industrial Base

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingSHIJIAZHUANG I & S CO., LTD.SHIJIAZHUANG I & S CO., LTD.SHIJIAZHUANG I & S CO., LTD.SHIJIAZHUANG I & S CO., LTD. Daliancarbon, carbon-manganese 150StructuralBarscarbon, carbon-manganese 150MachineryU1, U2, U3 150Chain Cable Stock







Shijiazhuang CityHebei Province

No. 363 Heping E Road

Tel: +86 (0)311 869 12562 Fax: +86 (0)311 869 13368Email: [email protected] #: MD00/3315/0003/1 Expiry date: 06/02/2016

As belowB.O.S. / Con CastSteelmakingSHOUGANG JINGTANG UNITED IRON & STEELSHOUGANG JINGTANG UNITED IRON & STEELSHOUGANG JINGTANG UNITED IRON & STEELSHOUGANG JINGTANG UNITED IRON & STEELCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Qingdao



AH32, AH36, DH32, DH36 18Higher Strength


AH32, DH32, AH36, DH36 18Higher Strength

Caofeidian Industrial Zone, Tangshan

Tel: +86 315 8872636 Fax: +86 315 8872606 email: [email protected] web: www.sgjsteel.com


Post Code: 063200

As belowB.O.S. / Con CastSteelmakingSHOUGANG QIAN'AN IRON & STEEL CO., LTD.,SHOUGANG QIAN'AN IRON & STEEL CO., LTD.,SHOUGANG QIAN'AN IRON & STEEL CO., LTD.,SHOUGANG QIAN'AN IRON & STEEL CO., LTD.,HEBEIHEBEIHEBEIHEBEI

Dalian

carbon, carbon-manganese, alloy 230SlabsSemi-Finished






Yang-dian-zi TownQian'an

Binhe Village

Tel: +86 315 7703138 Fax: +86 315 7703139 Email: mailto:[email protected] wwwsgqg.comCertificate #: MD00/3488/0003/1 Expiry date: 09/07/2014

Hebei, 064404

Carbon, Carbon-manganese, Alloy 8EAF/LRF/VD/IngotSteelmakingSICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD.SICHUAN LIUHE FORGING CO., LTD. WuhanBaolun Road(W), Henan Industrial ParkJiangyou City

Tel No: +86 0816 3456788 Fax No: +86 0816 3521398Email: bk.liwei'@gmail.comCertificate No: MD00/4176/0001/1 Expiry date 09/06/2016

Sichuan Province

A, B, D 18Normal StrengthPlates from coilsSINOSTEEL (TIANJIN) STEEL PROCESSINGSINOSTEEL (TIANJIN) STEEL PROCESSINGSINOSTEEL (TIANJIN) STEEL PROCESSINGSINOSTEEL (TIANJIN) STEEL PROCESSINGCO.LTDCO.LTDCO.LTDCO.LTD

Dalian


Xin Xing Village,Dongli District,

No 700 Hexing Road

Tel No 0086 22 24982876 Fax No. 0086 22 24981723Email [email protected] tianjin.sinosteel.comCert No. MD00/3656/0002/1 Expiry date: 08/07/2015Not approved for heat treatment

Tianjin

A, B, D 20Normal StrengthSectionsSUQIAN NANJING IRON & STEELSUQIAN NANJING IRON & STEELSUQIAN NANJING IRON & STEELSUQIAN NANJING IRON & STEEL NanjingAH32, AH36, DH32, DH36, DH40 20Higher Strength

No.89 Jingshan Road,Suyu District,

JINXIN STEEL ROLLING Co., Ltd.

Tel; +86 527 844 53907 Fax: +86 527 844 80094 Email: [email protected]: MD00/3741/0003/1 Expiry date: 17/12/2014

Suqian City, Jiangsu,







As belowE.A.F. / Con CastSteelmakingSUZHOU SUXIN SPECIAL STEEL CO., LTD.SUZHOU SUXIN SPECIAL STEEL CO., LTD.SUZHOU SUXIN SPECIAL STEEL CO., LTD.SUZHOU SUXIN SPECIAL STEEL CO., LTD. Shanghai PortU1, U2, U3 120Chain Cable StockBars

Huashan, Tong An, SuzhouJiangsu

Tel: +86 0512 8887 7088 Fax: +86 0512 88877815Certificate #: MD00/3492/0002/1 Expiry date: 14/07/2014

Post Code: 215151

As below, carbon, carbon-manganeseE.A.F. / IngotSteelmakingTAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD.TAI YUAN HEAVY INDUSTRY CO. LTD. Wuhancarbon, carbon-manganese 36Ingots (tonnes)Semi-Finished

No.53, Yuhe Street,Wanbailin District, Taiyuan City,

Tel +86 351 636 6770 Fax: +86 351 636 6750Email: [email protected]: www.tyhi.com.cnCertificate #: MD00/3412/0003/1 Expiry date: 02/10/2016

Shanxi Province, 030024,

As belowB.O.S. / Con CastSteelmakingTANGSHAN HEAVY PLATE CO., LTD.TANGSHAN HEAVY PLATE CO., LTD.TANGSHAN HEAVY PLATE CO., LTD.TANGSHAN HEAVY PLATE CO., LTD. Daliancarbon, carbon-manganese 250SlabsSemi-FinishedA, B, D 38Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 38Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 38Boiler & Pressure Vessel

Leting County,Tangshan City,

Lingang Industrial Park

Tel No: +86 315 4958304 Fax No: +86 315 4959038Email [email protected]


Hebei

A, B 18Normal StrengthSectionsTANGSHAN SHENGCAI STEEL CO., LTD.TANGSHAN SHENGCAI STEEL CO., LTD.TANGSHAN SHENGCAI STEEL CO., LTD.TANGSHAN SHENGCAI STEEL CO., LTD. Dalian

Angezhuang Town,Luannan County, Tangshan City,

South of Xinghonglin Village

Tel No: +86 315 445 1166 Fax No: +86 315 445 5599Email [email protected] xxxxxxxxxxxxxCertificate No: MD00/ 4131/ 0001/1 Expiry Date 19/03/2016

Hebei Province

A, B 14Normal StrengthSectionsTANGSHAN XINXIN SPECIAL STEEL CO. LTDTANGSHAN XINXIN SPECIAL STEEL CO. LTDTANGSHAN XINXIN SPECIAL STEEL CO. LTDTANGSHAN XINXIN SPECIAL STEEL CO. LTD DalianAH32, AH36 14Higher Strength

Bencheng Town, Luannan CountyTangshan City

No. 95 Middle Street

Tel: +86 0315 412 5016; Fax: +86 0315 412 5016Email:mailto: [email protected]: www.xxtg.cnCertificate #: MD00/3468/0004/1 Expiry date: 18/05/2014

As belowB.O.S. / Con CastSteelmakingTANGSHAN YANSHAN IRON & STEEL CO., LTD.TANGSHAN YANSHAN IRON & STEEL CO., LTD.TANGSHAN YANSHAN IRON & STEEL CO., LTD.TANGSHAN YANSHAN IRON & STEEL CO., LTD. DalianNormal strength, Higher Strength 250SlabsSemi-FinishedNormal Strength 150Billets

The West Side of Qianan Railway StationQianan City

Tel: +86 315 7769 566 Fax: +86 315 7769 566Billets nominal maximum width 150mm x 12,000mm nominal maximum length to the above maximum thickness supplied in the As Cast condition; slabsnominal maximum width 1,800mm x 12,000mm nominal maximum length to the above maximum thickness supplied in the As Cast condition; are approved forfurther processing for rolled products in the detailed strength levels.Certificate Number: MD00/3648/0004/1 Expiry: 09/06/2015

Hebei Province (064403)

As belowB.O.S. / Con CastSteelmakingTIANJIN IRON AND STEEL GROUP CO. LTD.TIANJIN IRON AND STEEL GROUP CO. LTD.TIANJIN IRON AND STEEL GROUP CO. LTD.TIANJIN IRON AND STEEL GROUP CO. LTD. Daliancarbon, carbon-manganese, alloy 250SlabsSemi-FinishedA, B, D 38Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 50Higher Strength

Dongli DistrictTianjin

398 Jintang Road

Tel:+86 22 24706052 Fax: +86 22 24706052 Email: mailto:[email protected]: www.tgsteel.comCertificate #: MD00/3485/0003/1 Expiry date: 02/07/2014

carbon, carbon-manganeseE.A.F. / Con CastSteelmakingTIANJIN PIPE (GROUP) CORPORATIONTIANJIN PIPE (GROUP) CORPORATIONTIANJIN PIPE (GROUP) CORPORATIONTIANJIN PIPE (GROUP) CORPORATION Daliancarbon, carbon-manganese 400BloomsSemi-Finished






LR OfficeLR OfficeLR OfficeLR OfficeNo 396, Jintang Road

Tel No: +86 22 2480 2296 Fax no: +86 22480 1291 Email [email protected]: www.tpco.comCertificate No MD00/3361/0003/1 Expiry Date 28/07/2016

300301

carbon, carbon-manganese 90E.A.F. / IngotSteelmakingTIANJIN TIANZHONG GIANT HEAVY INDUSTRYTIANJIN TIANZHONG GIANT HEAVY INDUSTRYTIANJIN TIANZHONG GIANT HEAVY INDUSTRYTIANJIN TIANZHONG GIANT HEAVY INDUSTRYCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Dalian

Xiditou TownBeichen District

No. 609, Jinyu Road

Tel:+86 (0)22 86885730 Fax: +86(0)22 8688 5730 Certificate #: MD00/4094/0002/1 Expiry date: 25/11/2015

Tianjin

A, B 15Normal StrengthSectionsTIANJIN YONGHENG ENTERPRISE CO., LTD.TIANJIN YONGHENG ENTERPRISE CO., LTD.TIANJIN YONGHENG ENTERPRISE CO., LTD.TIANJIN YONGHENG ENTERPRISE CO., LTD. DalianAH32, AH36 15Higher Strength

Daqiuzhuang Town Industrial ZoneTianjinTel:+86 (0)2228899290 Fax: +86(0)2260730999 Email:mailto:[email protected] Web:http://www.tjyhsy.comCertificate #: MD00/3953/0001/1 Expiry date: 25/09/2014

carbon, carbon-manganese, alloy 70E.A.F. / IngotSteelmakingTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., LtdTONGYU HEAVY INDUSTRY Co., Ltd Qingdaocarbon, carbon-manganese, alloy 70Ingots (tonnes)Semi-Finished

Dezhou City,Shandong Province,

High & New Technology Industry Development Zone,Yucheng City,

Tel: +86 534 7520690 Fax: +86534 7521470Certificate No. MD00/3998/0001/1 Expiry date:01/03/2015

As belowB.O.S. / Con CastSteelmakingWISCOWISCOWISCOWISCO WuhanAs below 250SlabsSemi-FinishedA, B, D, E 50Normal StrengthPlatesAH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50A, B, D 25Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 25Higher Strength360, 410 12Boiler & Pressure VesselA, B, D 25Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36 25Higher Strength360, 410 12Boiler and Pressure Vessel

QingshanWuhan

Wuhan Iron and Steel Co., Ltd.Changqian

Tel: +86 27 8689 8498 Fax: +86 27 8689 2413email: [email protected] web: www.wisco.com.cn


carbon, carbon-manganese, alloy 100Ingots (tonnes)Semi-FinishedWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRYWUHAN HEAVY INDUSTRY Wuhan

Quingshan District

CASTING AND FORGING CO., LTD.1 Wudong Street

Tel No:+86 027 6886 1813 Fax No: +86 027 6886 1810 Mob :+86 13720291417Email [email protected] www.whzg.com.cnCertificate No: MD00/1681/0001/1 Expiry date: 05/07/2017

Hubei

As belowB.O.S. / Con CastSteelmakingWUHAN IRON & STEEL GROUPWUHAN IRON & STEEL GROUPWUHAN IRON & STEEL GROUPWUHAN IRON & STEEL GROUP WuhanAs below, Normal strength, Higher Strength 300SlabsSemi-FinishedA, B, D, E 50Normal StrengthPlatesAH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 50Boiler & Pressure Vessel

Wuchang Dadao No. 105Ezhou City

ECHENG IRON & STEEL CO., LTD.

Tel: +86 711 3233225 Fax: +86 711 3233225 Email mailto: [email protected] #: MD00/3931/0002/1 Expiry date: 05/07/2014

Hubei Province, 436002

As belowE.A.F. / IngotSteelmakingWUHAN ZHONGYE MACHINERY WHOLE SETWUHAN ZHONGYE MACHINERY WHOLE SETWUHAN ZHONGYE MACHINERY WHOLE SETWUHAN ZHONGYE MACHINERY WHOLE SETEQUIPMENTEQUIPMENTEQUIPMENTEQUIPMENT

Wuhan








Lingcheng Road No. 2Lingxiang Town, Daye City

Gourp Co., Ltd.DAYE BRANCH

Tel: +86 0714 370 2019 Fax: +86 0714 370 2196 Email : [email protected] #: MD00/4242/0001/1 Expiry date: 28/10/2016

Hubei Province

As belowE.A.F./Ingot/Con CastSteelmakingWUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD. WuhanA, B, D, E 150Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100Higher Strength

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 100

Henan ProvinceP.N: 462500

Wugang City

Tel: +86 375 811 1230 Fax: +86 375 811 4006Plates with specified through thickness properties in listed grades of normal and higher strength steels.Certificate #: MD00/2044/0008/1 Expiry date: 14/07/2014

A, B, D, E 100Normal StrengthPlatesWUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD.WUYANG IRON & STEEL COMPANY LTD. WuhanFH32, FH36, FH40 50Higher StrengthAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

100


Wugang City,Henan Province,

Wuyang New Wide and Heavy Steel Plate Co Ltd

Tel No. +86 375 8111230 Fax No. +86 375 8114006 Email to: [email protected] with specified through thickness properties in listed grades of normal and higher strength steelsCertificate No. MD00/3714/0002/1 Expiry Date 14/07/2014

PN 462500

Carbon, Carbon-manganese, AlloyEAF/LRF/VD/IngotSteelmakingXINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD.XINING SPECIAL STEEL CO., LTD. Wuhancarbon, carbon-manganese, alloy 12Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 18ESR Ingotscarbon, carbon-manganese, alloy 250Semi-finished ProductsBars

No. 52 Chaidamu West RoadXining

Tel: 0086 0971 529 9294 Fax: 0086 0971 529 9407 Email: [email protected]: www.xntg.comCertificate #: MD00/3093/0002/1 Expiry date: 11/03/2016

Qinghai Province, 455004

See notesB.O.S. / Con CastSteelmakingXINYU IRON & STEEL CO. LTD.XINYU IRON & STEEL CO. LTD.XINYU IRON & STEEL CO. LTD.XINYU IRON & STEEL CO. LTD. WuhanSee notesE.A.F. / Con Castcarbon, carbon-manganese 250SlabsSemi-FinishedA, B, D, E 80Normal StrengthPlatesFH27S, FH32, FH36, FH40 50Higher StrengthAH27S, DH27S, DH40, EH27S, EH40 60AH32, AH36, DH32, DH36, EH32, EH36 80360AR, 410AR 20Boiler & Pressure Vessel360, 410 60360FG, 410FG, 460FG, 490FG, 510FG 80A, B 14Normal StrengthSectionsAH27S, AH32, AH36 14Higher Strength

Xinyu CityJiangxi Province 338001

1 Yejin Road

Tel: 0790 6293212 Fax: 0790 629 3826 Email: [email protected]: www.xinsteel.com.cnAll grades with specified through thickness properties, designation to Z35 may be addedCertificate #: MD00/3093/0008/1 Expiry date: 10/06/2016

As belowB.O.S. / Con CastSteelmakingXISC - HUNAN VALIN XIANGTANXISC - HUNAN VALIN XIANGTANXISC - HUNAN VALIN XIANGTANXISC - HUNAN VALIN XIANGTAN Wuhancarbon, carbon-manganese, alloy 300SlabsSemi-FinishedA, B, D, E 60Normal StrengthPlatesAH40, DH40, EH40, FH40 40Higher StrengthFH27S, FH32, FH36 60AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100

360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure VesselLTAH32, LTAH36, LTAH40, LTDH32, LTDH36,LTDH40, LTEH32, LTEH36, LTEH40, LTFH32,LTFH36, LTFH40








Xiangtan City,Hunan Province,

IRON & STEEL CO., LTD.Yuetang District,

Approved for Z25 & Z35 grades.

Tel +86 (0)731 5865 2130 Fax +86 (0) 731 58653050 Email mailto:[email protected] Web http://www.hnxg.com.cnCertificate #: MD00/3258/0008/1 Expiry date: 08/08/2015

austenitic stainlessB.O.S/V.O.D./Con CastSteelmakingYANTAI WALSIN STAINLESS STEEL CO., LTD.YANTAI WALSIN STAINLESS STEEL CO., LTD.YANTAI WALSIN STAINLESS STEEL CO., LTD.YANTAI WALSIN STAINLESS STEEL CO., LTD. Qingdaoaustenitic stainless steel 220Blooms/BilletsSemi-Finished

No. 2 Wuzhishan Road,Economic Technical Development Zone

Tel: +86 535 2166688 Fax: +86 535 2165008 Email:Jack_yen@walsinCertificate #: MD00/3992/0001/1 Expiry date: 21/02/2015

Yantai City, shandong Province

austenitic stainlessE.A.F. / IngotSteelmakingYONGXING SPECIAL STAINLESS STEEL CO LTDYONGXING SPECIAL STAINLESS STEEL CO LTDYONGXING SPECIAL STAINLESS STEEL CO LTDYONGXING SPECIAL STAINLESS STEEL CO LTD Shanghai Portaustenitic stainless 5Ingots (tonnes)Semi-Finishedaustenitic stainless 110Semi-finished ProductsBars

Yangjiabu,Huzhou City,

Tel No. +86 572 2350629 Fax No: +86 572 2351517Email: wang [email protected] : www.yongxingbxg.cnCertificate No. MD00/3791/0003/1 Expiry date 06/06/2016

Zhejiang Province

As belowE.A.F. / Con CastSteelmakingZENITH STEEL GROUP CO., LTD.ZENITH STEEL GROUP CO., LTD.ZENITH STEEL GROUP CO., LTD.ZENITH STEEL GROUP CO., LTD. JiangyinU3 113Chain Cable StockBars

Beside 312 National HighwayYinshu Village, Yaoguan Town

Tel No. +86 519 88771301 Fax No: +86 519 88771301Email: [email protected] No. MD00/3791/0003/1 Expiry date 06/06/2016

Changzhou, Jiangsu

Carbon, Carbon-manganese, Alloy 16EAF/LRF/VD/IngotSteelmakingZHEJIANG TIANJI HEAVY INDUSTRYZHEJIANG TIANJI HEAVY INDUSTRYZHEJIANG TIANJI HEAVY INDUSTRYZHEJIANG TIANJI HEAVY INDUSTRYMACHINERY CO., LTD.MACHINERY CO., LTD.MACHINERY CO., LTD.MACHINERY CO., LTD.

Shanghai Port

Fengqiao Town,Zhuji City,

No. 463 Busen Road,

Tel: +86 575 8704 1127 Fax: +86 575 8704 5392web: www.zhengtian.com.cnCertificate No. MD00/4069/0001/1 Expiry Date: 23/08/2015

Zhejiang Province,

austenitic stainless steelIF/AOD/Ingot/ConCastSteelmakingZHEJIANG TSINGSHAN IRON & STEEL CO.LTD.ZHEJIANG TSINGSHAN IRON & STEEL CO.LTD.ZHEJIANG TSINGSHAN IRON & STEEL CO.LTD.ZHEJIANG TSINGSHAN IRON & STEEL CO.LTD. Ningboaustenitic stainless 3Ingots (tonnes)Semi-Finishedaustenitic stainless steel 240Blooms/Billetsaustenitic stainless 150Billets

Wenxi Town,Qingtian,

Xiaoshi Industry Zone

Tel No. 0086 578 6071 658 Fax No. 0086 578 6071 658Email [email protected] : www. zjqingshan.cnCert no. MD00/3673/0002/1 Expiry date: 25/08/2015

Zhejiang Province

As belowB.O.S. / Con CastSteelmakingZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,LTD.LTD.LTD.LTD.

Dalian

A, B, D 38Normal StrengthPlates



Yangyi TownWuan City

No.1 Steel Making Plant

Tel: +86 (0)310-5178928 Fax: +86 (0)310-5178928 Web:http//www.hbpygt.com.cn Email: mailto:[email protected]: www.hbpygt.comCertificate #: MD00/3585/0002/1 Expiry date: 27/04/2015

Hebei Province, 056305







As belowB.O.S. / Con CastSteelmakingZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,ZHONGPU (HANDAN) IRON AND STEEL CO.,LTD.LTD.LTD.LTD.

Dalian


A, B, D 38Normal StrengthPlates



Yangyi Town,Wuan City,

No.2 Steel Making Plant

Tel: +86 (0)310-5178900 Fax: +86 (0)310-5178928 Web:http//www.hbpygt.com.cn web: www.hbpygt.comCertificate #: MD00/4034/0001/1 Expiry date:10/06/2015

CroatiaCroatiaCroatiaCroatia

As belowE.A.F. / Con CastSteelmakingABS SISAK d.o.o.ABS SISAK d.o.o.ABS SISAK d.o.o.ABS SISAK d.o.o. Zagrebcarbon, carbon-manganese 410BilletsSemi-Finished

BRAaE KAVURIaA 12,44010 Sisak,Tel: +385 44 565467 email: [email protected]

Cert No. MD/00/4210/0001/1 Expiry date: 25/07/2016

CubaCubaCubaCuba

As belowE.A.F. / Con CastSteelmakingACINOX LAS TUNASACINOX LAS TUNASACINOX LAS TUNASACINOX LAS TUNAS Havanacarbon, carbon-manganese 130BilletsSemi-Finished

Circuvalante Norte Km. 3 1/2CP75100

Tel: +53 131 46801 Ext 109 Fax: +53 131 46512 Email: [email protected] Web http://www.acinoxtunas.cuCertifcate: MD00/3698/0002/1 Expiry date: 23/05/2014

Las Tunas

Czech RepublicCzech RepublicCzech RepublicCzech Republic

carbon, carbon-manganese 5Structural SectionsFabricated SectionsARCELOR MITTAL TUBULAR PRODUCTSARCELOR MITTAL TUBULAR PRODUCTSARCELOR MITTAL TUBULAR PRODUCTSARCELOR MITTAL TUBULAR PRODUCTSKARVINA A.S.KARVINA A.S.KARVINA A.S.KARVINA A.S.

Prague

733 23 KarvinaRude armady 471

Tel: +420 596 391 330 M: +420 724 555 571 Fax: +420 598 391 337Email to: [email protected] Web http://www.jakl.cz

Longitudinal high frequency induction (HFI) welded tubes, pipes and hollowsCertificate #: MD00/3338/0004/4 Expiry date: 11/12/2016

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingARCELORMITTAL ENGINEERING PRODUCTSARCELORMITTAL ENGINEERING PRODUCTSARCELORMITTAL ENGINEERING PRODUCTSARCELORMITTAL ENGINEERING PRODUCTSOSTRAVA s.r.oOSTRAVA s.r.oOSTRAVA s.r.oOSTRAVA s.r.o

Prague


alloy 180

carbon, carbon-manganese, alloy 200Billets

A, B, D 14Normal StrengthSections

A, B, D 60Normal StrengthBars







Vratimovská 689707 02 Ostrava-Kuncice

Approval for semi finished products covers con cast slabs to 150 x 1270mm, con cast billets to 180 x 180mm and con cast rounds to 400mm diameter.

Tel: +420 59 568 4130 email: [email protected] web: www.arcelormittal.com/ostrava


As belowB.O.S. / Con CastSteelmakingEVRAZ VITKOVICE STEEL, a.s.EVRAZ VITKOVICE STEEL, a.s.EVRAZ VITKOVICE STEEL, a.s.EVRAZ VITKOVICE STEEL, a.s. PragueNormal strength, Higher Strength 250SlabsSemi-FinishedA, B, D, E 100Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure Vessel709 00 Ostrava - HulvakyStramberska c.p. 2871/47

Tel: +420 59 595 5842 Fax: +420 602 485 466 Email: mailto:[email protected] Web: http://www.evrazvitkovicesteel.com

Approved for plates with specified through thickness properties (Z35) in all grades up to 50 mm thickness.

Semi-finished products in carbon and carbon-manganese steels with fine grain: slabs to 1580mm wide to 8000mm long for further processing for rolled products

Materials Quality Scheme Approved - MQS 039Certificate #: MD00/1638/0014/1 Expiry date: 06/08/2016

PSC 709 00

As belowE.A.F. / IngotSteelmakingPILSEN STEEL s.r.o.PILSEN STEEL s.r.o.PILSEN STEEL s.r.o.PILSEN STEEL s.r.o. Praguecarbon, carbon-manganese, alloy 200Ingots (tonnes)Semi-Finished

316 00 PlzenTylova 1/57

Tel: +420 378 134 225 Fax: +420 378 132 058Email: [email protected]: www.pilsensteel.cz Certificate # MD00/1383/0006/1 Expiry date: 23/03/2017

carbon, carbon-manganese, alloy 300StructuralBarsSOCHOROVÁ VÁLCOVNA TZ, a.s.SOCHOROVÁ VÁLCOVNA TZ, a.s.SOCHOROVÁ VÁLCOVNA TZ, a.s.SOCHOROVÁ VÁLCOVNA TZ, a.s. Praguecarbon, carbon-manganese, alloy 300Machinery

272 01 Kladno-DrinTel No +420 558 536 065 Fax No. +420 558 534 926Email [email protected] www.trz.czMachinery grade bars with the maximum diameter of 300 mm produced from con-cast blooms may be accepted with a minimum rolling reduction of 3:1.Certificate #: MD00/2955/0005/1 Expiry date: 21/02/2015

As belowB.O.S./Ingot/Con CastSteelmakingTRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s. PragueAs belowE.A.F./Ingot/Con Castcarbon, carbon-manganese 140SlabsSemi-Finishedcarbon, carbon-manganese, alloy 525BarsA 50Normal StrengthSectionscarbon, carbon-manganese, alloy 90MachineryBarsU1, U2 72Chain Cable Stock

Prumyslová 1000Staré Mesto

Tel: +420 558 534 016 Fax: +420 558 536 060 Email: mailto:[email protected] Web hppt://www.trz.czCertificate #: MD00/1562/0007/1 Inspection Due: 12/07/2016

739 61 Trinec

B, D 40Normal StrengthSectionsTRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s.TRINECKÉ ŽELEZÁRNY, a.s. PragueA 50DH32, DH36 40Higher StrengthAH27S, AH32, AH36 50

Univerzalni tratBezrucova 300

Tel: +42 (0) 596 083 216 or +42(0) 596 082 881 email: [email protected] Web www.moravia-steel.czThe approved sections are in the form of universal flats nominal widths 150 to 550mm to the maximum thicknesses shown above.

Parent Company: TRINECKE ZELEZARNY a.s., Prumyslova 1000, 739 70 Trinec-Stare Metso.Certificate ID No : MD00/2020.Certificate No. MD00/3056/0005/1 Expiry date: 12/02/2016

735 93 Bohumín







As belowE.A.F. / IngotSteelmakingVITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s.VITKOVICE HEAVY MACHINERY a.s. Praguecarbon, carbon-manganese, alloy 80Ingots (tonnes)Semi-Finished

Ruska 2887/10170602 Ostrava-VitkoviceTel: +420 595 95 6491 Mob: +420 724 135544 email: [email protected] web: www.vitkovice.cz


carbon, carbon-manganese, alloy 4E.A.F. / IngotSteelmakingZ - GROUP STEEL HOLDING A.S.Z - GROUP STEEL HOLDING A.S.Z - GROUP STEEL HOLDING A.S.Z - GROUP STEEL HOLDING A.S. Prague

Rokycanská 204,338 42 Hrádek u Rokycan,

Division Železárny Hrádek,

Tel: +420 474 644096 Fax: +420 474 642 288 Email mailto:[email protected]: www.steel-holding.czCertificate #: MD00/4063/0002/1 Expiry date: 05/08/2015

carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingZDAS, a.s.ZDAS, a.s.ZDAS, a.s.ZDAS, a.s. Praguecarbon, carbon-manganese, alloy 12Ingots (tonnes)Semi-Finished

59171 Zdár nad SázavouMetallurgical Plant

Tel: +420 566 643 998 Fax: +420 566 642 803 Email: mailto:[email protected] Web:http://www.zdas.czCertificate #: MD00/1697/0004/1 Expiry date: 26/08/2014

DenmarkDenmarkDenmarkDenmark

E 60Normal StrengthPlatesNLMK DANSTEEL A/SNLMK DANSTEEL A/SNLMK DANSTEEL A/SNLMK DANSTEEL A/S CopenhagenA, B, D 100EH32, EH36, EH36S 80Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36 100360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 100

DK-3300 FrederiksværkHavnevej 33

Tel: +45 477 82647 Fax: +45 477 70322 Email: mailto:[email protected] Web:http://www.dansteel.dkAll grades and thicknesses accepted with specified through thickness properties, Z25 and Z35 designations.Certificate Number: MD00/0403/0007/1 Expiry: 09/01/2015

Egypt, Arab Republic ofEgypt, Arab Republic ofEgypt, Arab Republic ofEgypt, Arab Republic of

A, B, D 100Normal StrengthPlatesABU ZAABAL ENGINEERING INDUSTRIESABU ZAABAL ENGINEERING INDUSTRIESABU ZAABAL ENGINEERING INDUSTRIESABU ZAABAL ENGINEERING INDUSTRIES CairoAH27S 20Higher Strength

Inchas

Hot and Cold Rolling mill (AZE)Abu Zaabal

Tel: +20 24469 1224 Fax: +20 24469 2608 Email: [email protected] www.azr.comCertificate # MD00/3421/0004/1 Expiry date: 27/01/2017

As belowB.O.S. / Con CastSteelmakingEGYPTIAN IRON & STEEL CO.EGYPTIAN IRON & STEEL CO.EGYPTIAN IRON & STEEL CO.EGYPTIAN IRON & STEEL CO. Port SaidA 50Normal StrengthPlatesA 50Normal StrengthHot Rolled Coil360FG, 410FG 25Boiler & Pressure VesselA 50Normal StrengthSections

HelwanCairo

El Tebbin

Tel: +202 5940593 Fax +202 5011608 Email: mailto:[email protected] Web www.iron.steel.com.egTelex 20176 TebbinCertificate #: MD00/0438/0008/1 Expiry date: 21/02/2016







FinlandFinlandFinlandFinland

As belowE.A.F. / Con CastSteelmakingOUTOKUMPU STAINLESS OYOUTOKUMPU STAINLESS OYOUTOKUMPU STAINLESS OYOUTOKUMPU STAINLESS OY Helsinki/Helsingfors

austenitic stainless 187SlabsSemi-Finished

304L, 316L, 321 12Austenitic StainlessPlates

304L, 316L, 321 12Austenitic StainlessHot Rolled Coil

304L, 316L, 321 6Austenitic StainlessCoil

Terastie 1,95490

Tel No: +358 40 7675371 Fax no:+358 16 452 350Email:[email protected] Web: http://www.outokumpu.comCertificate #: MD00/1165/0006/1 Expiry date: 03/03/2014

Tornio

As belowE.A.F. / Con CastSteelmakingOVAKO IMATRA OY ABOVAKO IMATRA OY ABOVAKO IMATRA OY ABOVAKO IMATRA OY AB Turku/Åbocarbon, carbon-manganese, alloy 370BloomsSemi-FinishedAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

180Higher StrengthBars

carbon, carbon-manganese, alloy 180Structuralalloy 180Machinerycarbon, carbon-manganese 200

Terästehtaantie 1FI-55100 IMATRATel: +358 5 680 21 Fax: +358 5 680 2211 Email: mailto:[email protected] Web:http://www.ovako.comSemi-finished products in carbon, carbon-manganese and alloy steel with fine grain (element combinations as stated), blooms to 370 mm section, to 6000mmlong for further processing to rolled productsMQS Approved - Approval No. MQS 020Certificate #: MD00/0751/0009/1 Expiry date: 06/01/2015

As belowB.O.S. / Con CastSteelmakingRUUKKI METALS OYRUUKKI METALS OYRUUKKI METALS OYRUUKKI METALS OY Turku/ÅboA, B, D, E 150Normal StrengthPlatesFH27S, FH32, FH36 40Higher StrengthAH40, DH40, DH42, EH40, EH42 80AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

150

360AR, 410AR 40Boiler & Pressure Vessel360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG,510FG

100

LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


A, B, D, E 15Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

15Higher Strength

Rautaruukintie 155, PO Box 9392101 Raahe

Raahe Steel Works

Tel +358 20 5911 Mob +358 40 54 90257 Fax +358 20 5923527 Email:mailto:[email protected] Web: http://www.ruukki.com Specified through thickness properties for up to 100 mm thickness.

MQS Approved - Approval No. MQS 007Certificate #: MD00/1233/0009/1 Expiry date: 10/12/2016







FranceFranceFranceFrance

Carbon, Carbon-manganese, AlloyEAF/LRF/VD/IngotSteelmakingAKERS FRANCEAKERS FRANCEAKERS FRANCEAKERS FRANCE Lyoncarbon, carbon-manganese, alloy 70Ingots (tonnes)Semi-Finished

B.P. 1020057104 Thionville Cedex

USINE DE THIONVILLEChemin du Leidt

Tel: +33 6 79 27 94 41 e mail: mailto:[email protected] web: http://www.akersrolls.comCertificate #: MD00/3386/0002/1 Expiry date: 27/05/2014

304L, 316L, 321, 304* 6Austenitic StainlessPlatesAPERAMAPERAMAPERAMAPERAM Lyon

4 place des Forges71130 Gueugnon

Gueugnon Plant BP 1

Tel: +33 3 85 85 78 56 Fax: +33 3 85 85 14 12 Mob: +33 609320872Email: mailto:[email protected] Web: http://www.aperam.comCertificate #: MD00/1582/0006/1 Expiry Date: 10/03/2017

As belowE.A.F. / IngotSteelmakingAPERAM ALLOYS IMPHYAPERAM ALLOYS IMPHYAPERAM ALLOYS IMPHYAPERAM ALLOYS IMPHY LyonFe-36Ni* 8Fe-Ni alloysPlatesFe-36Ni* 1Fe-Ni alloysHot Rolled Coil

Avenue Jean Jaurès58160 IMPHYTel: +33 3 86 21 31 23 Fax: +33 3 86 21 31 07 Email:mailto:[email protected] Web:http://www.aperam.com*Cold and hot rolled strip up to 8mm in INVAR/M93 grade (Fe-Ni36) accepted for approved applications; material greater than 1.5mm supplied in the AsRolled condition; materials 1.5mm or less are supplied in the solution annealed condition.Certificate Number: MD00/1870/00065/1 Expiry: 14/06/2015

As belowB.O.S. / Con CastSteelmakingARCELORMITTALARCELORMITTALARCELORMITTALARCELORMITTAL MarseilleNormal strength, Higher Strength 229SlabsSemi-FinishedA, B, D 16Normal StrengthHot Rolled CoilAH32, AH36, DH32, DH36, EH36 13Higher Strength460FG, 490FG, 510FG 13Boiler & Pressure Vessel360AR, 410AR 16

13776 Fos-Sur-MerCEDEX

Méditerranée Fos-sur-Mer

Tel: +33 (0) 442 47 33 33 Fax +33 (0) 4 4247 31 00 Email: mailto: [email protected]: www.arcelormediterranee.comCertificate #: MD00/3803/002/1 Expiry date: 24/11/2015

As belowE.A.F./Ingot/Con CastSteelmakingASCOMETALASCOMETALASCOMETALASCOMETAL Dunkerquecarbon, carbon-manganese, alloy 400Blooms/BilletsSemi-Finishedcarbon, carbon-manganese, alloy 310StructuralBarscarbon, carbon-manganese, alloy 310MachineryU3 105Chain Cable StockU1, U2 130

59941 DunkerqueCedex 2

Usine de DunesBP 41

Machinery grades up to 180 mm by continuous casting, 310 mm by ingotTel +33 32829 6203 Fax +33 32829 6003Certificate #: MD00/0117/0007/1 Expiry date: 12/09/2015

As belowE.A.F. / IngotSteelmakingASCOMETALASCOMETALASCOMETALASCOMETAL Marseillecarbon, carbon-manganese, alloy 400BloomsSemi-Finishedcarbon, carbon-manganese, alloy 205Billetscarbon, carbon-manganese, alloy 325StructuralBars

13771 Fos-sur-Mer

Usine de Fos-sur-MerBP 30

Tel: +33 (0) 442 479 216 Fax: +33 (0) 442 051 511 Email : mailto:[email protected] Number: MD00/0118/0006/1 Expiry: 03/09/2015

As belowE.A.F. / IngotSteelmakingAUBERT & DUVALAUBERT & DUVALAUBERT & DUVALAUBERT & DUVAL Lyoncarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless


BP 14142704 FIRMINY CEDEX

Firminy Plant

Tel: +33 4 77 40 36 22 Fax: +33 4 77 40 36 99 Email mailto:[email protected] Web: http://www.aubertduval.comIngots as semi-finished products to the above maximum weight; nominal; 1550/1730mm diameter x 2200mm; are approved for further processing for forgings.Certificate Number: MD00/1770/0001/1 Expiry: 25/09/2015







As belowB.O.S. / Con CastSteelmakingCELSA FRANCECELSA FRANCECELSA FRANCECELSA FRANCE BilbaoNormal Strength, Higher Strength 160BilletsSemi-Finished

Rond-Point Claudius Magnin64340 BoucauTel: +33 05 59 64 41 00 Fax: +33 05 59 64 41 21 email: [email protected] Web: http://www.celsafrance.comBillets as semi-finished products, nominal 160mm width and nominal 13300mm length to the above maximum thickness are approved for further processing forrolled products.Certificate Number: MD00/3539/0002/1 Expiry date: 12/11/2014

E 80Normal StrengthPlatesGTS IndustriesGTS IndustriesGTS IndustriesGTS Industries DunkerqueA, B, D 100AH40, DH40, EH40, FH40 42Higher StrengthFH27S, FH32, FH36 50AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

75

460FG, 490FG, 510FG 50Boiler & Pressure Vessel360FG, 410FG 100LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


Port 30323032 Rue du Comte Jean - CS 56317

Tel: +33 (0)3 28 29 39 64 Fax: +33 (0)3 28 29 69 12 Email:mailto:[email protected]: http://www.gts-dillinger.frSpecified through thickness properties for all nornal and higher strength grade plates notation Z35 may be added.Certificate #: MD00/1818/0008/1 Expiry date: 08/06/2016

F-59379 Dunkerque Cedex 1

carbon, carbon-manganeseE.A.F. / IngotSteelmakingINDUSTEEL FRANCEINDUSTEEL FRANCEINDUSTEEL FRANCEINDUSTEEL FRANCE LyonA 400Normal StrengthPlatesFH32, FH36 50Higher StrengthAH32, AH36, DH32, DH36, EH32, EH36 400360AR, 410AR 40Boiler & Pressure Vessel360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,9Ni


BP 368 - Chateauneuf42803 RIVE DE GIER

ARCELOR MITTALSite de Chateauneuf

Tel: +33 4 77 75 21 12 Fax: +33 4 77 75 20 03 Email: mailto:[email protected]

Including plates with specified through thickness properties.Certificate #: MD00/0351/0006/1 Expiry date: 20/04/2014

As belowE.A.F. / IngotSteelmakingINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du Creusot Lyoncarbon, carbon-manganese, alloy, austeniticstainless


71201 71201 LE CRUUSOT CEDEXLe Creusot Cedex

Porte du Breuil - BP 34

Tel No 33 3 8580 5575 Fax No. 33 3 8580 5211Email: [email protected]: www.industeel.infoCertificate number MD00/3227/0001/1Ingots also in martensitic stainless steel up to 40 T for approved applications

A, B, D, E 150Normal StrengthPlatesINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du CreusotINDUSTEEL FRANCE, site du Creusot LyonFH32, FH36 50Higher StrengthAH32, AH36, DH32, DH36, EH32, EH36 150360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure VesselLTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,9Ni


304L, 316L 50Austenitic Stainless

7120156 rue Clemenceau - BP19

Tel: +33 3 8580 5575 Fax: +33 3 8580 5211Email: mailto:[email protected] Web: http://www.industeel.infoPlates with specified through thickness properties.Certificate #: MD00/1822/0007/1 Expiry date: 27/02/2015

As belowB.O.S. / Con CastSteelmakingLAMINES MARCHANDS EUROPEENSLAMINES MARCHANDS EUROPEENSLAMINES MARCHANDS EUROPEENSLAMINES MARCHANDS EUROPEENS Lyoncarbon, carbon-manganese 200BilletsSemi-FinishedA 13Normal StrengthSectionsA 30Normal StrengthBars







2, Rue Emile Zola59125 Trith St LégerTel +33 (0)3 2714 2270 Fax +33 (0)3 2714 2010 Email: mailto:[email protected] #: MD00/1395/0007/1 Expiry date: 20/10/2013

A, B, D, E 16Normal StrengthFabricated SectionsLORRAINE TUBESLORRAINE TUBESLORRAINE TUBESLORRAINE TUBES LyonAH32, AH36, DH32, DH36, EH32, EH36 14Higher Strength

54720 Lexy100, rue du Maréchal Foch

Tel No: +33 382 252 252 Fax No: +33 382 252 116Email: [email protected]: www.condesa.comCertificate No: MD00/4281/0001/ 1 Expiry Date: 17/01/2017

A, B, D, E 16Normal StrengthFabricated SectionsLORRAINE TUBESLORRAINE TUBESLORRAINE TUBESLORRAINE TUBES LyonAH32, AH36, DH32, DH36, EH32, EH36 16Higher Strength

57480 RettelRoute du Contez

Tel No: +33 382 252 225 Fax no: +33 382 252 116Email: [email protected]: www.condesa.com Certificate No: MD00/4282/0001/1 Expirt Date 17/01/2014

As belowE.A.F./A.O.D./Con CastSteelmakingUGITECH S.A.UGITECH S.A.UGITECH S.A.UGITECH S.A. LyonAs below 205BilletsSemi-Finished304L, 316L, 321 32Austenitic StainlessSectionsUNS S31803 32Duplex Stainless304L, 316L, 321 130Austenitic StainlessBarsUNS S31803 130Duplex Stainlessaustenitic stainless, duplex stainless, martensiticstainless*

95Machinery

Avenue Paul Girod,73403 UGINE CedexTel: +33 4 79 89 32 92 Fax: +33 4 79 89 34 74 Email: mailto:[email protected] Web: http://www.ugitech.comCertificate #: MD00/1583/0006/1 Expiry Date: 24/08/2014

GermanyGermanyGermanyGermany

As belowB.O.S. / Con CastSteelmakingARCELORMITTAL BREMEN GmbHARCELORMITTAL BREMEN GmbHARCELORMITTAL BREMEN GmbHARCELORMITTAL BREMEN GmbH BremerhavenAs below 220SlabsSemi-FinishedA, B, D 20Normal StrengthHot Rolled Coil360, 410, 360FG, 410FG 20Boiler & Pressure Vessel

Carl-Benz- Straße 30D-28237 BremenTel +49 421 648 2306 Fax +49 412 648 49 2306 email: [email protected] web: www.arcelormittal.com/bremen


carbon, carbon-manganeseB.O.S. / Con CastSteelmakingARCELORMITTAL EISENHÜTTENSTADT GMBHARCELORMITTAL EISENHÜTTENSTADT GMBHARCELORMITTAL EISENHÜTTENSTADT GMBHARCELORMITTAL EISENHÜTTENSTADT GMBH Dortmundcarbon, carbon-manganese 225SlabsSemi-Finishedcarbon, carbon-manganese 300Blooms

D-15872 EisenhüttenstadtWerkstraße 1

Tel +49 3364 3782 05 Fax +49 3364 3781 97 Email: mailto:[email protected] Web http://www.arcelormittal-ehst.comContinuously cast slab up to 250 mm thickness and cast bloom up to 300 mm thickness.Certificate No. MD00/0450/0005/1 Expiry date: 22/01/2013

As belowB.O.S. / Con CastSteelmakingARCELORMITTALAL RUHRORT GmbHARCELORMITTALAL RUHRORT GmbHARCELORMITTALAL RUHRORT GmbHARCELORMITTALAL RUHRORT GmbH Dortmundcarbon, carbon-manganese, alloy 385BloomsSemi-Finishedcarbon, carbon-manganese, alloy 130Billets

Vohwinkelstraße 107D-47137 DuisburgTel 0049 (0) 203 / 52 66 180 Fax 0049 (0) 203 / 606 66 332 email: [email protected] Web http://www.arcelormittal.comCertificate Number: MD00/3631/0002/1 Expiry date: 25/07/2014

As belowB.O.S./Ingot/Con CastSteelmakingAktiengesellschaft der Dillinger HüttenwerkeAktiengesellschaft der Dillinger HüttenwerkeAktiengesellschaft der Dillinger HüttenwerkeAktiengesellschaft der Dillinger Hüttenwerke HamburgA, B, D, E 170Normal StrengthPlatesFH32, FH36 50Higher StrengthAH40, DH40, EH40, EH46S, FH46S 100EH46, FH46 110AH32, AH36, DH32, EH32 170DH36, EH36 220360FG, 410FG, 460FG, 490FG, 510FG 100Boiler & Pressure VesselLTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, LTFH32, LTFH36, 5Ni








HüttenwerkstrassePostfach 1580

All plates with specified through thickness properties.

Tel: +49 6381 474735 Fax: +49 6831 473689 email: [email protected] web:: www.dillinger.de


D-66748 Dillingen / Saar

carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingBENTELER STEEL/TUBE GmbHBENTELER STEEL/TUBE GmbHBENTELER STEEL/TUBE GmbHBENTELER STEEL/TUBE GmbH Dortmundcarbon, carbon-manganese, alloy 215SlabsSemi-Finishedcarbon, carbon-manganese, alloy 310Blooms/Billets

Niederdarmer Straße 5D-49811 LingenTel: +49 591 80004 800 Fax: +49 591 80004 460 Email to: [email protected] Web: http://www.benteler.deCertificate No. MD00/1805/0006/1 Expiry date: 11/10/2014

Steelmaking and semi-finished slabs, blooms and billets intended for plates, forgings and tubes.Semi-finished products in carbon, carbon-manganese and alloy steel: slabs to 670mm wide, to 11,500mm long to 12.8 tonnes and blooms/billets of dimensions300mm x 230mm or 310mm round of maximum length 12,800mm

As belowE.A.F./Ingot/Con CastSteelmakingBGH EDELSTAHL FREITAL GmbHBGH EDELSTAHL FREITAL GmbHBGH EDELSTAHL FREITAL GmbHBGH EDELSTAHL FREITAL GmbH Dortmundalloy, stainless steel, austenitic stainless, duplexstainless


stainless steel 230SlabsAs below 120Billetsalloy, austenitic stainless, duplex stainless,martensitic stainless*

165MachineryBars

Am Stahlwerk 1D-01705 FreitalTel: +49 (0)351 646 2232 Fax: +49 (0)351 646 2888 Email: mailto:[email protected] Web: http://www.bgh.deIncluding forged barsCertificate No. MD00/1973/0006/1 Expiry date: 06/08/2014

As belowE.A.F./V.O.D./IngotSteelmakingBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbHBGH EDELSTAHL SIEGEN GmbH Dortmundalloy, austenitic stainless, martensitic stainless 32Ingots (tonnes)Semi-Finished

Industriestraße 9,D-57076

Tel No. +49 (0)271 701- 341 Fax No. +49 (0) 271 701- 300Email [email protected] www.bgh.deCertificate No MD00/3767/0003/1 Expiry date: 31/03/2016

Siegen

See notesB.O.S. / Con CastSteelmakingBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbHBUDERUS EDELSTAHL GmbH Dortmundcarbon, carbon-manganese, alloy, austeniticstainless

E.A.F. / Ingot

Martensitic stainless*E.A.F./V.O.D./Ingotcarbon, carbon-manganese, alloy 200Semi-finished ProductsBarscarbon, carbon-manganese, alloy 190Machinery

Buderusstraße 25D-35573 WetzlarTel: +49 (0)6441 374 2505 Fax: +49 (0)6441 374 2681 Email: mailto:[email protected] Web: http://www.buderus-steel.comCertificate No. MD00/0257/0009/1 Expiry date: 08/07/2014

As belowE.A.F. / Con CastSteelmakingDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBH DortmundAs belowE.A.F. / Ingotcarbon, carbon-manganese, alloy, austeniticstainless

80StructuralBars

carbon, carbon-manganese, alloy, austeniticstainless, duplex stainless, martensitic stainless*

80Machinery

Obere KaiserstraßeD-57078 Siegen

Works Siegen

Tel: +49 (0)271 808 26 94 Fax: +49 (0)271 808 25 01 Email: mailto:[email protected] Web: http://www.dew-stahl.comCertificate No. MD00/0901/0008/1 Expiry date: 12/07/2014

As belowE.A.F. / Con CastSteelmakingDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBHDEUTSCHE EDELSTAHLWERKE GMBH DortmundAs belowE.A.F. / Ingotcarbon, carbon-manganese, alloy, stainless steel 66Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy, austeniticstainless

250Semi-finished ProductsBars

alloy, austenitic stainless 250Structuralalloy, austenitic stainless, duplex stainless,martensitic stainless*

250Machinery







Auestraße 4D-58452 Witten

Works Witten

Tel: +49 (0) 2302 292 437 Fax: +49 (0) 2302 294 008email: [email protected] web:www.dew-stahl.comCertificate No. MD00/2075/0011/1 Expiry date: 20/01/2016

As belowE.A.F./Ingot/Con CastSteelmakingGEORGSMARIENHÜTTE GmbHGEORGSMARIENHÜTTE GmbHGEORGSMARIENHÜTTE GmbHGEORGSMARIENHÜTTE GmbH Dortmundcarbon, carbon-manganese, alloy 44Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 240BloomsA, B, D, E 180Normal StrengthBarsAH32, AH36, DH32, DH36, EH32 180Higher Strengthalloy 270Structuralcarbon, carbon-manganese 280U1, U2, U3, R3 155Chain Cable Stock

D-49124 GeorgsmarienhütteNeue Hüttenstraße 1

Tel: +49 (0)5401 39 4630 Fax: +49 (0)5401 39 4598 Email: [email protected] Web: http://www.gmh.deCertificate No. MD00/0596/0007/1 Expiry date: 02/10/2016

As belowE.A.F. / Con CastSteelmakingH.E.S. HENNIGSDORFER ELEKTROSTAHLWERKEH.E.S. HENNIGSDORFER ELEKTROSTAHLWERKEH.E.S. HENNIGSDORFER ELEKTROSTAHLWERKEH.E.S. HENNIGSDORFER ELEKTROSTAHLWERKEGmbHGmbHGmbHGmbH

Dortmund

carbon, carbon-manganese, alloy 100StructuralBars


U1, U2 73Chain Cable Stock

Wolfgang-Küntscher-Straße 18D-16761 HennigsdorfTel: +49 (0)3302 806-0 Fax: +49 (0)3302 806-211 Email: mailto:[email protected] Web: http://www.rivagroup.comCertificate No. MD00/0665/0007/1 Expiry date: 01/07/2014

A 50Normal StrengthSectionsHOESCH SCHWERTER PROFILE GmbHHOESCH SCHWERTER PROFILE GmbHHOESCH SCHWERTER PROFILE GmbHHOESCH SCHWERTER PROFILE GmbH DortmundEisenindustriestraße 1D-58239 SchwerteTel: +49 (0)2304 106-340 Fax: +49 (0)2304 106-590 Email: mailto:[email protected] Web: http://www.hoesch-profile.deCertificate No. MD00/0682/0006/1 Expiry date: 08/01/2015

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingHüttenwerke Krupp Mannesmann GmbHHüttenwerke Krupp Mannesmann GmbHHüttenwerke Krupp Mannesmann GmbHHüttenwerke Krupp Mannesmann GmbH Dortmundcarbon, carbon-manganese, alloy 260SlabsSemi-Finishedcarbon, carbon-manganese, alloy 406Blooms/Billets

Ehinger Strasse 200D-47259 Duisburg-Huckingen

Huckingen Works

Tel: +49 (0)203 999-01 Fax: +49 (0)203 999-4411 Email: mailto:[email protected] Web: http://www.hkm.deCertificate No. MD00/0730/0006/1 Expiry date: 07/02/2015

B, D, E 85Normal StrengthPlatesILSENBURGER GROBBLECH GmbHILSENBURGER GROBBLECH GmbHILSENBURGER GROBBLECH GmbHILSENBURGER GROBBLECH GmbH DortmundA 150AH40, DH40, EH40, FH40 100Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S, FH32, FH36

120

360AR, 410AR, 460AR 40Boiler & Pressure Vessel360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG,510FG

100

LTAH40, LTDH40, LTEH40, 1.5Ni, 3.5Ni, 5Ni,9Ni



120

316L 80Austenitic StainlessVeckenstedter WegD-38871 IlsenburgAll plates with specified through thickness properties.

Tel: +49 39452/85 5530 Fax: +49 39452/85 5733 email [email protected] web: www.ilsenburger-Grobblech.de


As belowE.A.F. / Con CastSteelmakingLech-Stahlwerke GmbHLech-Stahlwerke GmbHLech-Stahlwerke GmbHLech-Stahlwerke GmbH HamburgAs below 240Blooms/BilletsSemi-FinishedA, B 100Normal StrengthBarscarbon, carbon-manganese, alloy 90Machinery

Industriestrasse 1D-86405 MeitingenTel: +49 (0) 8271/82-325 Fax: +49 (0) 8271/82-405 Email:mailto:[email protected] Web: http://www.lech-stahlwerke.deCertificate No. MD00/0921/0006/1 Expiry date: 02/11/2015







As belowE.A.F. / Con CastSteelmakingPEINER TRÄGER GMBHPEINER TRÄGER GMBHPEINER TRÄGER GMBHPEINER TRÄGER GMBH DortmundA, B, D, E 40Normal StrengthSectionsAH32, AH36, DH32, DH36, EH32, EH36 40Higher Strength

D-31226 PeineGerhard-Lucas-Meyer Str. 10

Tel: +49 5171 91 9321 Fax: +49 5171 91 9373 email: [email protected] web: www.peinertraeger.deCertificate No. MD00/3075/0004/1 Expiry date: 13/05/2016

A, B, D, E 250Normal StrengthPlatesREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KG BremenAH32, AH36, DH32, DH36, EH32, EH36 120Higher StrengthAH27S, DH27S, EH27S 250460FG, 490FG, 510FG 120Boiler & Pressure Vessel360FG, 410FG 150

Wilhelm-Karmann-Straße 5D-28237 BremenTel: +49 421 985 08-140 Fax: +49 421 985 08-149 Email mailto:[email protected] Web:http://www.brach.deCertificate No. MD00/2631/0006/1 Expiry date: 01/01/2015

carbon, carbon-manganese 43Ingots (tonnes)Semi-FinishedREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KGREINER BRACH GmbH & Co. KG Bremen

Werkstraße,16D-15890 Eisenhüttenstadt

Betriebsstätte Eisenhüttenstadt

Tel No +49 3364 37 81 54 Fax No +49 3364 37 81 55Email: [email protected]: www.brach.deCertificate No. MD00/4032/0001/1 Expiry Date 08/06/2015

Carbon, Carbon-manganese 56EAF/LRF/VD/IngotSteelmakingSAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDESAARSCHMIEDE GmbH FREIFORMSCHMIEDE HamburgBismarckstraße 57-59D-66330 VölklingenTel:+49 (0)6898 102650 Fax:+49(0)6898 104560 Email:mailto: [email protected] Web:http://www.saarschmiede.comCertificate No. MD00/2017/0001/1 Expiry date: 25/06/2014

A 40Normal StrengthBarsSAARSTAHL AGSAARSTAHL AGSAARSTAHL AGSAARSTAHL AG HamburgU1, U2, U3 40Chain Cable Stock

D-66511 NeunkirchenWorks Neunkirchen

Tel: +49 6821 168644 Fax: +49 6898 1054293 Email: mailto:[email protected] Web:http://www.saarstahl.comCertificate No. MD00/1286/0006/1 Expiry date: 10/08/2014

As belowB.O.S. / Con CastSteelmakingSAARSTAHL AGSAARSTAHL AGSAARSTAHL AGSAARSTAHL AG HamburgNormal Strength 265Blooms/BilletsSemi-FinishedA 160Normal StrengthBarsU1, U2, U3 100Chain Cable Stock

Bismarckstrasse 57 - 59D-66330 Völklingen

Works Völklingen

Tel: +49 (0) 6898 104 293 Fax: +49 (0) 6898 105 4293 Email: mailto:[email protected] Web:http://www.saarstahl.comCertificate Number: MD00/1931/0006/1 Expiry: 10/08/2014

As belowB.O.S. / Con CastSteelmakingSALZGITTER FLACHSTAHL GmbHSALZGITTER FLACHSTAHL GmbHSALZGITTER FLACHSTAHL GmbHSALZGITTER FLACHSTAHL GmbH Dortmundcarbon, carbon-manganese 350SlabsSemi-Finished

D-38239 Salzgitter,Eisenhüttenstrasse 99,Tel: +49 5341 21-3196 Fax: +49 5341 21-2008Email: [email protected]: www.salzgitter-flachstahl.de

Approved slab section sizes up to 350 x 2600mm.

Steel types carbon and carbon-manganese cover the supply of slabs for processing into normal strength, high strength, boiler and pressure vessel grades andferritic steels for low temperature service according to the Society's Rules for the Manufacture, Testing and Certification of Materials, Chapter 3. The finalprocessing mill is responsible for ordering steel which complies with their approved chemical composition and enables them to achieve the required mechanicalproperties.

A, B, D, E 50Normal StrengthPlatesSALZGITTER MANNESMANN GROBBLECH GmbHSALZGITTER MANNESMANN GROBBLECH GmbHSALZGITTER MANNESMANN GROBBLECH GmbHSALZGITTER MANNESMANN GROBBLECH GmbH DortmundAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

360AR, 410AR 40Boiler & Pressure Vessel360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 50304L, 316L 50Austenitic Stainless

Wiesenstraße 36D-45473 Mülheim an der RuhrTel: +49 (0)208 458 458 4510 Fax: +49 (0)208 458 1872 Email: mailto:[email protected] Web: http://www.smgb.deCertificate No. MD00/1806/0006/1 Expiry date: 28/04/2014







As belowE.A.F. / IngotSteelmakingSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbHSCHMIEDEWERKE GRÖDITZ GmbH Dortmundcarbon, carbon-manganese, alloy, austeniticstainless


D-01609 GröditzRiesaer Straße 1

Tel: +49 35 263 62-613 Fax: +49 35 263 62-622 email: [email protected] web: www.stahl-groeditz.de


Including ESR ingot and the supply of liquid steel to Stahlguss Groditz GmbH.

As belowE.A.F./V.O.D./IngotSteelmakingSILBITZ GUSS GmbHSILBITZ GUSS GmbHSILBITZ GUSS GmbHSILBITZ GUSS GmbH Dortmundduplex stainless 7Ingots (tonnes)Semi-Finished

Dr. - Maruschky- Straße 2D-07613 Silbitz/ThüringenTel: +49 (0)3 6693 80-250 Fax: +49 (0)3 6693 80251 email: mailto: [email protected] web: www.silbitz-guss.de


Ingot approval covers duplex and superduplex grades.

carbon, carbon-manganese, alloyE.A.F./Ingot/Con CastSteelmakingSTAHLWERK BOUS GMBHSTAHLWERK BOUS GMBHSTAHLWERK BOUS GMBHSTAHLWERK BOUS GMBH Hamburgcarbon, carbon-manganese 60Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 430Billets

D-66359 Bous/SaarP/O Box 1243

Tel: +49 6834 81286 Fax: +49 6834 81586 Email: mailto:[email protected] Web http://www.stahlwerk-bous.deIngots up to 60 tonne and 2300 mm dia.Con cast billets approved to 430 x 320mm.


As belowE.A.F. / Con CastSteelmakingSTAHLWERK THÜRINGEN GMBHSTAHLWERK THÜRINGEN GMBHSTAHLWERK THÜRINGEN GMBHSTAHLWERK THÜRINGEN GMBH DortmundA, B 25Normal StrengthSectionsAH32, AH36, DH32, DH36 25Higher Strength

D-07333 UnterwellenbornKronacher Straße 6

Tel +49 3671 455006010 Fax +49 3671 45507710 Email: mailto:[email protected] Web http://www.stahlwerk-thueringen.deCertificate #: MD00/1424/0007/1 Expiry date: 21/11/2015

As belowE.A.F. / IngotSteelmakingSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KGSchmidt + Clemens GmbH +Co. KG Dortmundcarbon, carbon-manganese, alloy, austeniticstainless

50StructuralBars

D-51789 LindlarKaiserau 2

Tel: +49 (0)22 66 9230 Fax: +49 (0)22 66 928230 Email: mailto:[email protected] Web http://www.schmidt-clemens.deCertificate #: MD00/1319/0008/1 Expiry date: 10/10/2016

A, B, D, E 20Normal StrengthHot Rolled CoilTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AG DortmundAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher Strength360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20Boiler & Pressure VesselA, B, D, E 20Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36 20Higher Strength410 FG, 460 FG, 360 FG, 360, 410, 490FG, 510FG 20Boiler and Pressure Vessel

Kaiser-Wilhelm-Straße 100D-47166 Duisburg

Works Bochum

Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:[email protected] Web: http://www.thyssenkrupp-stahl.comCertificate No. MD00/0899/0007/1 Expiry date: 24/08/2014

As belowB.O.S. / Con CastSteelmakingTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AG DortmundAs below 255SlabsSemi-FinishedA, B, D, E 20Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher Strength360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20Boiler & Pressure Vessel

Works BeeckerwerthTel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:[email protected] Web: http://www.thyssenkrupp-stahl.comCertificate # MD00/1823/0007/1 Expiry date: 19/08/2014

As belowB.O.S. / Con CastSteelmakingTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AG DortmundA, B, D, E 20Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher Strength360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20Boiler & Pressure Vessel

Works BruckhausenTel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:[email protected] Web: http://www.thyssenkrupp-stahl.comCertificate No. MD00/1824/0007/1 Expiry date: 25/08/2014







A, B, D, E 150Normal StrengthPlatesTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AGTHYSSENKRUPP STEEL EUROPE AG DortmundFH27S, FH32, FH36 50Higher StrengthAH40, DH40, EH40 60AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100

360AR, 410AR 40Boiler & Pressure Vessel360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


UNS S31803 35Duplex StainlessA, B, D, E 20Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36,EH27S, EH32, EH36

20Higher Strength

360 FG, 460 FG, 410 FG, 360, 410, 490FG, 510FG 20Boiler and Pressure VesselWorks Duisburg-SüdTel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:[email protected] Web: http://www.thyssenkrupp-stahl.comSpecified through thickness properties on all normal and higher strength steel grade plates.Certificate No. MD00/1825/0008/1 Expiry date: 19/08/2014

As belowE.A.F./Ingot/Con CastSteelmakingThyssenKrupp Nirosta GmbHThyssenKrupp Nirosta GmbHThyssenKrupp Nirosta GmbHThyssenKrupp Nirosta GmbH Dortmundaustenitic stainless 16Ingots (tonnes)Semi-Finishedaustenitic stainless 240Slabs

Oberschlesienstraße 16D-47807 Krefeld

Works Krefeld

Tel: +49 (0) 211 7107 562 Fax: +49 (0) 211 7107 376 Email: mailto:[email protected] Web: http://www.thyssenkrupp.comIngots as semi finished products nominal dimensions 1700 x 690xmm & nominal height 2600mm to the above maximum weight and slabs as semi finishedproducts nominal width 1500mm & nominal length 10000mm, are approved for further processing for rolled products.Certificate Number: MD00/1852/0006/1 Expiry date: 16/11/2014

IndiaIndiaIndiaIndia

Carbon, Carbon-manganese, AlloyEAF/LRF/VD/IngotSteelmakingARCVAC FORGECAST LTDARCVAC FORGECAST LTDARCVAC FORGECAST LTDARCVAC FORGECAST LTD Calcuttacarbon, carbon-manganese, alloy 10Ingots (tonnes)Semi-Finished

Post Box: 9210Kolkata: 700071

12C, Lord Sinha Road,

Tel: + 91 33 2600 2176; Fax + 91 33 2659 8002Email: [email protected]: www. arcvacsteel.comCertificate No. MD00/3561/0003/1 Expiry date: 07/02/2015

West Bengal

As belowE.A.F. / Con CastSteelmakingBHUSHAN POWER & STEEL LIMITEDBHUSHAN POWER & STEEL LIMITEDBHUSHAN POWER & STEEL LIMITEDBHUSHAN POWER & STEEL LIMITED Calcuttacarbon, carbon-manganese 200BilletsSemi-FinishedU1, U2, U3 90Chain Cable StockBars

Vill. Thelkoli, P.O. Lapanga,Tehsil - Rengoli,

Tel: +91 663 253 5000 / 256 2026-32 Fax: +91 663 256 2007 / 256 2011 Email: [email protected] Web: http://www.bpsl.netBillets as semi-finished products nominal 200mm maximum width x nominal 12000mm maximum length are approved for further processing for rolledproducts.Bars for Grades U1 and U2 accepted for end use in the normalised condition; bars for Grade U3 accepted for end use in the quenched and tempered condition.Certificate Number: MD00/xxxx/0001/1 Expiry: 10/06/2016

Distt. Sambalpur - 768 232,

As belowE.A.F. / Con CastSteelmakingESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD. MumbaiNormal strength, Higher Strength 260SlabsSemi-FinishedA, B 20Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher Strength360FG, 410FG 20Boiler & Pressure VesselA, B 20Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36 20Higher Strength

Hazira - 394270District Surat

Hot Strip Mill

Tel: +91 261 6683139 Fax: +91 261 6683747 Email mailto:[email protected] Web http://www.essar.com Slabs as semi finished products nominal maximum width 2040mm x nominal maximum length 4900mm to the above maximum thickness are approved forfurther processing for rolled products.Certificate No. MD00/2091/0008/1 Expiry date: 06/06/2015

Gujarat

E 70Normal StrengthPlatesESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD.ESSAR STEEL INDIA LTD. MumbaiA, B, D 100AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

70Higher Strength

360FG, 410FG 100Boiler & Pressure Vessel






LR OfficeLR OfficeLR OfficeLR OfficePlate Mill DivisionTel: +91 261 668 3291 or 6739 Fax: +91 261 668 3747 Email mailto:[email protected] or [email protected] Webhttp://www.essar.com All plates are restricted to a maximum width of 4550mm.Certificate Number: MD00/3979/0004/1 Expiry: 17/01/2015

carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingISMT LIMITED (STEEL PLANT)ISMT LIMITED (STEEL PLANT)ISMT LIMITED (STEEL PLANT)ISMT LIMITED (STEEL PLANT) Punecarbon, carbon-manganese, alloy 225BloomsSemi-Finishedcarbon, carbon-manganese, alloy 150Bars

Jejuri 412 303Purandara, Pune

Morgaon Road

Tel: +91-020-414 34100 Fax: +91-020-26630779 Email mailto: [email protected] Web http://www.ismt.comCertificate number. MD00/3816/0002/1 Expiry date: 23/08/2016

Maharashtra

austenitic stainlessE.A.F./A.O.D./Con CastSteelmakingJINDAL STAINLESS LIMITEDJINDAL STAINLESS LIMITEDJINDAL STAINLESS LIMITEDJINDAL STAINLESS LIMITED Yamunanagaraustenitic stainlessE.A.F./V.O.D./Con CastAs below 160SlabsSemi-Finished304L, 316L, 317L, 321, 347 53Austenitic StainlessPlates

O.P. Jindal MargHisar Haryana State

Post Box No. 6

Tel: +91 98960 95029email: [email protected] web: www.jslstainless.comCertificate No. MD00/3110/0004/1 Expiry date: 21/10/2016

India Pin 125 005

As BelowB.O.S./E.A.F./Con CastSteelmakingJINDAL STEEL & POWER LIMITEDJINDAL STEEL & POWER LIMITEDJINDAL STEEL & POWER LIMITEDJINDAL STEEL & POWER LIMITED New DelhiA, B, D 80Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 80Higher Strength360AR, 410AR, 460AR, 360, 410, 460, 490,360FG, 410FG, 460FG, 490FG


Post Box No.16Kharsia Road

Raigarh

Tel: +91 7762 227001 10 Fax: +91 7762 227021/22 Email to [email protected] Certificate No. MD00/3542/0002/1 Expiry date: 02/08/2014

Raigarh 496001 Chattisgarh

As belowE.A.F./Ingot/Con CastSteelmakingKALYANI CARPENTER SPECIAL STEELS LTD.KALYANI CARPENTER SPECIAL STEELS LTD.KALYANI CARPENTER SPECIAL STEELS LTD.KALYANI CARPENTER SPECIAL STEELS LTD. Mumbaicarbon, carbon-manganese, alloy 4Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 320Bloomscarbon, carbon-manganese, alloy 250Semi-finished ProductsBarscarbon, carbon-manganese, alloy 150Structural

MundhwaPune 411 036

Tel: +91 20 6621 5000 Fax: +91 20 2682 4483 Email: mailto:[email protected] Web: http://www.kalyanicarpenter.comIngots as semi-finished products to the above maximum weight nominal 540/700mm diameter x 1770mm long 540/700 and blooms to the above maximumthickness nominal 400mm wide x 10,000mm long are accepted for further processing for rolled products.Certificate Number: MD00/0815/0008/1 Expiry: 22/08/2015

Maharashtra

As belowE.A.F. / IngotSteelmakingMAHINDRA SANYO SPECIAL STEEL PVT. LTD.MAHINDRA SANYO SPECIAL STEEL PVT. LTD.MAHINDRA SANYO SPECIAL STEEL PVT. LTD.MAHINDRA SANYO SPECIAL STEEL PVT. LTD. Mumbaicarbon, carbon-manganese, alloy, austeniticstainless


carbon, carbon-manganese, alloy, austeniticstainless steel

260Blooms/Billets

A 50Normal StrengthSectionsA 200Normal StrengthBars

KhopoliDist. Raigad

Khopoli WorksJagdish Nagar

Tel: +91 952192 263318 (263347) Fax: +91 952192 263582 (263076) Email mailto:[email protected] www.mahindra.comCertificate No. MD00/0971/0008/1 Expiry date: 16/07/2015

Maharashtra 410 216

As belowB.O.S. / Con CastSteelmakingSTEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD. BhilaiA, B, D 75Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

460FG, 490FG, 510FG 50Boiler & Pressure Vessel360AR, 410AR, 360, 410 63360FG, 410FG 75







Bhilai 490 001Chhattisgarh

Bhilai Steel Plant

Tel +91 940 7981686 Fax +91 788 2222040 Email:mailto:[email protected] No. MD00/1433/0008/1 Expiry date: 28/04/2014

As belowB.O.S. / Con CastSteelmakingSTEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD.STEEL AUTHORITY OF INDIA LTD. CalcuttaA, B 52Normal StrengthPlates360, 410, 360FG, 410FG 35Boiler & Pressure Vessel360AR, 410AR 40

Rourkela 769 011Orissa

Rourkela Steel Plant

Tel: +91 (0) 661 244 7424 Fax +91 (0) 661 251 0183 email: [email protected] Web: http://www.sail.co.in Certificate Number: MD00/1434/0006/1 Expiry: 22/06/2016

As belowB.O.S. / Con CastSteelmakingTATA STEEL LIMITEDTATA STEEL LIMITEDTATA STEEL LIMITEDTATA STEEL LIMITED CalcuttaA 50Normal StrengthPlates360AR, 410AR 50Boiler & Pressure VesselA 12Normal StrengthHot Rolled Coil

Kolkata 700 07143 Chowringhee Road

Tel: +91 (33) 22889251 Fax: +91 (33) 22887255/22881396 Email mailto:[email protected] Web http://www.tata.comCertificate No. MD00/1489/0006/1 Expiry date:15/02/2015

alloyE.A.F. / IngotSteelmakingU.P. STEELSU.P. STEELSU.P. STEELSU.P. STEELS New Delhi

Meerut Road,Muzaffarnagar - 251 203

A Unit of ISGEC Heavy Engineering LimitedNara

Tel +91 1396 252404/5/6 Fax + 91 1396 252324Email: [email protected]: www.upsteels.comCertificate No. MD00/1984/0003/1 Expiry date: 07/08/2014

Uttar Pradesh

austenitic stainless steelIF/AOD/Ingot/ConCastSteelmakingVIRAJ PROFILES LIMITED (SMS DIVISION)VIRAJ PROFILES LIMITED (SMS DIVISION)VIRAJ PROFILES LIMITED (SMS DIVISION)VIRAJ PROFILES LIMITED (SMS DIVISION) Mumbaiaustenitic stainless steel 300Blooms/BilletsSemi-Finished

Boisar, Taluka - Palghar, Dist. Thane,Maharashtra - 401506,

G-2 / G23 MIDC, Tarapur Industrial Area,

Tel: +91 2525 261514 Fax: +91 2525 260159 Email mailto:[email protected] Web: http://www.viraj.comBillets and blooms as semi-finished products to the above maximum thickness, nominal 300mm wide x nominal 9000mm long are approved for furtherprocessing for forged products.Certificate Number: MD00/2935/0004/1 Expiry date: 08/12/2014

IndonesiaIndonesiaIndonesiaIndonesia

B, D 25Normal StrengthPlatesPT. GUNAWAN DIANJAYA STEEL TbkPT. GUNAWAN DIANJAYA STEEL TbkPT. GUNAWAN DIANJAYA STEEL TbkPT. GUNAWAN DIANJAYA STEEL Tbk JakartaA 40AH27S, AH32, AH36, DH27S, DH32, DH36 40Higher Strength360AR, 410AR 25Boiler & Pressure Vessel

Jl. Margomulyo No. 29AGreges-Asemrowo

Tel: +62 31 7490598 Fax: +62 31 7490581/7482109Email: mailto:[email protected] Web http://www.gunawansteel.comCertificate No. MD00/1882/0008/1 Expiry date: 15/12/2015

Surabaya 60183

A, B 50Normal StrengthPlatesPT. GUNUNG RAJA PAKSIPT. GUNUNG RAJA PAKSIPT. GUNUNG RAJA PAKSIPT. GUNUNG RAJA PAKSI JakartaAH36, AH40, DH36, DH40, EH36, EH40 50Higher Strength360AR, 410AR 40Boiler & Pressure VesselA, B 16Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 14Higher Strength360AR, 410AR 16Boiler & Pressure Vessel

JI. Imam Bonjol 4, Warung BongkokDesa Sukadanau, Clkarang Barat, Bekasi

Tel: +62 21 8900111 ext 3518 Fax: +62 21 8900333Email: mailto:[email protected] Web: http://www.grdsteel.comCertificate No. MD00/2749/0004/1 Expiry date: 14/11/2016

West Java, Indonesia

A, B 25Normal StrengthPlatesPT. JAYA PARI STEEL Tbk.PT. JAYA PARI STEEL Tbk.PT. JAYA PARI STEEL Tbk.PT. JAYA PARI STEEL Tbk. SurabayaJl Margomulyo No. 4Tandes

Tel: +62 31 7491288 Fax:+62 31 7491714 Email:mailto:[email protected] No. MD00/2304/0006/1 Expiry date: 26/04/2014

Surabaya 80186







As belowE.A.F. / Con CastSteelmakingPT. KRAKATAU STEEL (PERSERO) TBK.PT. KRAKATAU STEEL (PERSERO) TBK.PT. KRAKATAU STEEL (PERSERO) TBK.PT. KRAKATAU STEEL (PERSERO) TBK. JakartaNormal strength 200SlabsSemi-FinishedA 25Normal StrengthHot Rolled CoilA 25Normal StrengthPlates from coils

Jl. Industri No. 5PO. Box 14

Divisi QP & MS (QA)

Tel: +62 (0) 254 317274 Fax: +62 (0) 254 372608 Email: mailto:[email protected] Web: http://www.krakatausteel.comPlates and coils in the supply condition TM+Acc Fine Grain Al+Nb are restricted to the thickness range 16.0 to 25.0mm.Slabs as semi-finished products nominal maximum width 2000mm x and nominal maximum length 12000 mm to the above maximum thickness are approvedfor further processing for rolled products.Certificate Number: MD00/1183/0008/1 Expiry: 02/02/2015

Cilegon 42435

ItalyItalyItalyItaly

As belowE.A.F./Ingot/Con CastSteelmakingA.B.S. Acciaierie Bertoli Safau S.p.A.A.B.S. Acciaierie Bertoli Safau S.p.A.A.B.S. Acciaierie Bertoli Safau S.p.A.A.B.S. Acciaierie Bertoli Safau S.p.A. TriesteCarbon, Carbon manganese, Alloy 370Rolled BarsSemi-FinishedCarbon, Carbon-manganese, Alloy 700As Cast Round SectionCarbon, Carbon-manganese, Alloy 420Rolled Square Barscarbon, carbon-manganese, alloy 240StructuralBarscarbon, carbon-manganese, alloy 240MachineryU1, U2, U3 78Chain Cable Stock

33050 Pozzuolo del Friuli (UD)Via Buttrio, 28

Tel: +39 (0) 432 613 211 Fax: +39 (0) 432 613 249 E-mail: mailto:[email protected] Web: http://www.absacciai.itCertificate No. MD00/0019/0009/1 Expiry date: 15/06/2014

As below, carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingACCIAIERIA FONDERIA CIVIDALE S.P.A.ACCIAIERIA FONDERIA CIVIDALE S.P.A.ACCIAIERIA FONDERIA CIVIDALE S.P.A.ACCIAIERIA FONDERIA CIVIDALE S.P.A. Triestecarbon, carbon-manganese, alloy 35Ingots (tonnes)Semi-Finished

Zona Industriale33043 Cividale del Friuli

Via delle Industrie No. 40

Tel +39 432 706922 Fax +39 432 706920 email: [email protected] web www.cividalespa.com


Steel types carbon, carbon-manganese and alloy cover the supply of ingots for processing into forgings according to the Society's Rules for the Manufacture,Testing and Certification of Materials, Chapter 5. The final processing mill is responsible for ordering steel which complies with their approved chemicalcomposition and enables them to achieve the required mechanical properties

(Udine)

As belowE.A.F./Ingot/Con CastSteelmakingACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A. Venicecarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless


carbon, carbon-manganese, alloy, austeniticstainless, duplex stainless

220Billets

austenitic stainless, precipitation hardenedstainless*, martensitic stainless*

155MachineryBars

duplex stainless 205

36100 VicenzaViale Della Scienza, 25 z.i.

Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:[email protected] Web:http://www.acciaierie-valbruna.com* Accepted for approved applicationsApproval for Precipitation Hardened Stainless Machinery Bar is for Grade 17.4 PH, approval for Martensitic Stainless Machinery Bar is for Grade 431 andGrade 1.4418 Quenched and Tempered.Duplex Stainless Steel bars are not approved for use in welded construction, and weld repair is not permitted.Approval of Con cast material is for the production of Austenitic Stainless Steels only.Ingots as semi finished products nominal maximum dimensions 600mm x 530mm x 2060mm to the above maximum weight are accepted for further processingfor rolled products and forgings.Billets as semi finished products nominal maximum width 220mm x nominal maximum length 6500mm to the above maximum thickness are accepted forfurther processing for rolled products and forgings.Certificate No. MD00/0041/0006/1 Expiry date: 02/06/2014

As belowE.A.F./Ingot/Con CastSteelmakingACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A.ACCIAIERIE VALBRUNA S.P.A. Veniceas belowA.O.D./Ingot/Con Castaustenitic stainless, duplex stainless,precipitation hardened stainless*, martensiticstainless*

73MachineryBars

Via A Volta 439100 Bolzano39100 Bolzano* Accepted for approved applicationsTel; +39 (0)471 924111 Fax: +39 (0)471 924355Email: mailto:[email protected] Web: http//www.acciaierie-valbruna.itCertificate No. MD00/2994/0004/1 Expiry date: 26/06/2015







carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingACCIAIERIE VENETE S.p.A.ACCIAIERIE VENETE S.p.A.ACCIAIERIE VENETE S.p.A.ACCIAIERIE VENETE S.p.A. Venicecarbon, carbon manganese, Alloy 280Blooms/BilletsSemi-FinishedCarbon, Carbon-manganese, Alloy 600As Cast Round Sectioncarbon, carbon-manganese, alloy 200Semi-finished ProductsBarscarbon, carbon-manganese, alloy 180Structuralcarbon, carbon-manganese, alloy 130Machinery

35020 Camin (Padova)

Camin WorksRiviera Francia, 9

Tel +39 (0)49 8282 820 Fax +39 (0)49 8282 666 Email: mailto:[email protected] Web: http://www.acciaierievenete.comCertificate No. MD00/0042/0006/1 Expiry date: 26/03/2015

Approval does not cover bars with a diameter of less than 65mm.

As belowE.A.F. / Con CastSteelmakingAFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A. VeniceNormal strength, Higher Strength 220SlabsSemi-FinishedA, B, D, E 20Normal StrengthSectionsAH32, AH36, DH32, DH36 20Higher Strength

Viale della Scienza 81/A36100 VicenzaTel +39 0444 967111 Fax +39 0444 967137Email: mailto:[email protected] Web site http://www.beltrame.itCertificate No. MD00/0047/0007/1 Expiry date: 22/02/2015

A, B, D, E 40Normal StrengthBarsAFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A.AFV ACCIAIERIE BELTRAME S.p.A. VeniceAH27S, AH32, AH36, DH27S, DH32, DH36 40Higher Strength

Via del Commercio, 1530175 Marghera (VE)

Stabilimento di Marghera

Tel +39 041 2583711 Fax +39 041 2583819 E-mail:mailto:[email protected] www.beltame.itCertificate No. MD00/1374/0006/1 Expiry date: 09/02/2015 *Enhanced Survey*

A, B, D 22Normal StrengthFabricated SectionsARMANDO CIMOLAI CENTRO SERVIZI SrlARMANDO CIMOLAI CENTRO SERVIZI SrlARMANDO CIMOLAI CENTRO SERVIZI SrlARMANDO CIMOLAI CENTRO SERVIZI Srl TriesteAH32, AH36, DH32, DH36 22Higher Strength

Via Masieres, No.3233080 San Quirino (PN)Tel: +39 (0)434 919292 Fax: +39 (0)434 919266Email: [email protected] No. MD00/2620/0005/1 Expiry date: 01/12/2014

A 25Normal StrengthFabricated SectionsASA S.r.l.ASA S.r.l.ASA S.r.l.ASA S.r.l. RavennaVia Gaiano,3360027 Osimo (AN)Tel No: +39 071 7131407 Fax No: +39 071 7132745Email [email protected] www.asabugatti.itCertificate No: MD00/4118/0001/1 Expiry date 30/01/2016

carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingASO SIDERURGICA S.r.L.ASO SIDERURGICA S.r.L.ASO SIDERURGICA S.r.L.ASO SIDERURGICA S.r.L. Bresciacarbon, carbon-manganese, alloy 65Ingots (tonnes)Semi-Finished

25035 OspitalettoBrescia

UnipersonaleVia Seriola no. 122

Tel: +39 (0)30 6841011-(0)30 6841165 Fax: +39 (0)30 6841012 Email: mailto:[email protected] Web: http://www.aso.itCertificate No. MD00/0020/0005/1 Expiry date: 15/04/2014

austenitic stainless, duplex stainlessE.A.F. / Con CastSteelmakingCOGNE ACCIAI SPECIALI S.p.aCOGNE ACCIAI SPECIALI S.p.aCOGNE ACCIAI SPECIALI S.p.aCOGNE ACCIAI SPECIALI S.p.a Milanmartensitic stainless*E.A.F. / Ingotaustenitic stainless, duplex stainless 4Ingots (tonnes)Semi-FinishedMartensitic Stainless Steel* 160Billetsaustenitic stainless, duplex stainless 270Martensitic Stainless Steel* 220Bars

Via Paravera,1611100 AOSTATel No: +39 165 3021 Fax no: +39 165 43779Email: [email protected] site: www.cogne.comCertificate No.MD00/3809/0002/1 Expiry date 13/07/2016

A 30Normal StrengthPlatesEVRAZ PALINI E BERTOLI S.P.A.EVRAZ PALINI E BERTOLI S.P.A.EVRAZ PALINI E BERTOLI S.P.A.EVRAZ PALINI E BERTOLI S.P.A. TriesteAH32, AH36 30Higher Strength

Via E. Fermi, 28 - 33058San Giorgio di Nogaro (UD)Tel: +39 0431 62 3111 Fax: +39 0431 62 1244 Email: [email protected] web: www.paliniebertoli.itCertificate No. MD00/1809/0007/1 Expiry date: 09/06/2014







carbon, carbon-manganese, alloy, austeniticstainless, duplex

125IngotsESRFOMAS S.p.A.FOMAS S.p.A.FOMAS S.p.A.FOMAS S.p.A. Milan

Via Martiri della Liberazione, 1723875 Osnago (LC)Tel No +39 3999811 Fax No +39 3958487Email: [email protected] www.fomas.itCertificate No MD00/0475/0003/1 Expiry 09/01/2016

A 20Normal StrengthFabricated SectionsG. BAGLIETTO S.a.s. NAVAL STEELG. BAGLIETTO S.a.s. NAVAL STEELG. BAGLIETTO S.a.s. NAVAL STEELG. BAGLIETTO S.a.s. NAVAL STEEL GenoaAH36, DH36, EH36 20Higher Strength

Novi Ligure (AL)Via Castelgazzo 11

Certificate No. MD00/3910/0001/1 Expiry date: 16.05.2014

As belowB.O.S. / Con CastSteelmakingILVA S.p.A.ILVA S.p.A.ILVA S.p.A.ILVA S.p.A. PalermoNormal strength, Higher Strength 303SlabsSemi-FinishedA, B, D, E 80Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

80Higher Strength

A 10Normal StrengthHot Rolled CoilAH27S, AH32, AH36 10Higher Strength

Via Appia KM 648Taranto 74100

Taranto Works

Tel: +39 02 307 00 775 Fax: +39 02 307 00 285 Email: mailto:[email protected] Web: http://www.rivagroup.comSpecified through thickness properties for grade D, E, AH, DH and EH notation Z35 may be addedCertificate No. MD00/2276/0006/1 Expiry date: 11/10/2015

carbon, carbon-manganese, alloy, austeniticstainless

E.A.F. / IngotSteelmakingLUCCHINI RS S.p.A.LUCCHINI RS S.p.A.LUCCHINI RS S.p.A.LUCCHINI RS S.p.A. Brescia

Via G. Paglia N.4524065 Lovere

Tel: +39 035 963535 Fax: +39 035 963488 Email: mailto:[email protected] Web: http://www.lucchiniRS.itCertificate No. MD00/0949/0007/1 Expiry date: 19/03/2015

Bergamo

A, B, D, E 60Normal StrengthPlatesMETINVEST TRAMETAL S.p.A.METINVEST TRAMETAL S.p.A.METINVEST TRAMETAL S.p.A.METINVEST TRAMETAL S.p.A. TriesteAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

60Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 60Boiler & Pressure VesselVia Enrico Fermi, 4433058 San Giorgio di Nogaro (UD)

Approved for Z grade plates with specified through thickness properties when tested in accordance with Rules requirements.

Tel: +39 010 57 62911 Fax: +39 010 57 62990 Email:mailto:[email protected] Web:http://www.trametal.itCertificate No. MD00/2004/0007/1 Expiry date: 02/08/2014

As belowE.A.F. / IngotSteelmakingNLMK VERONANLMK VERONANLMK VERONANLMK VERONA Venicecarbon, carbon-manganese 32Ingots (tonnes)Semi-Finished

Via A, Salieri, 22,37050 Vallese di Oppeano (Verona)Tel: +39 045 699 7900 Fax: +39 045 699 7901 email: [email protected] Web: http://www.eu.nlmk.com/verona/Ingots as semi finished products are approved for further processing for forgings to the above maximum weight. Round and Polygon ingots to nominalmaximum dimensions of 1200mm diameter x 4750mm length, oblong ingots to nominal maximum dimensions 970mm x 870mm x 2050mm.Certificate Number MD00/3985/0001/1 Expiry date: 31/01/2015

Carbon, Carbon-manganese, Alloy 40EAF/LRF/VD/IngotSteelmakingNUNKI STEEL SPANUNKI STEEL SPANUNKI STEEL SPANUNKI STEEL SPA VeniceE.Fermi 33,33058 San Giorgio Di Nogaro (UD),Tel: 00 39 (0)431621227 Fax: 00 39 (0)431622438Certificate No.:MD00/40870001/1 Expiry Date: 06/11/2015

A, B, D, E 50Normal StrengthFabricated SectionsOFFICINE NORD EST S.r.lOFFICINE NORD EST S.r.lOFFICINE NORD EST S.r.lOFFICINE NORD EST S.r.l TriesteAH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength

Via Ungaresca No.1233080 San Quirino (Pn)Tel: +39 (0)434 919091 Fax: +39 (0)434 918646 Email to: [email protected] Certificate No. MD00/2626/0006/1 Expiry date: 07/12/2014

A, B, D 10Normal StrengthSectionsOLIFER-ACP S.P.A.OLIFER-ACP S.P.A.OLIFER-ACP S.P.A.OLIFER-ACP S.P.A. BresciaAH32, AH36, DH32, DH36 10Higher Strength

Loc.Motta Alta, 1424050 Cividate Al Piano

ROLLING MILL - ODOLOBrescia Work

Tel +39 365 826088 Fax +39 365 860727 Email: mailto:[email protected] Web:http://www.olifer.comCertificate No. MD00/1147/0007/1 Expiry date: 31/03/2015

Bergamo







As belowE.A.F./Ingot/Con CastSteelmakingOLIFER-ACP S.P.A.OLIFER-ACP S.P.A.OLIFER-ACP S.P.A.OLIFER-ACP S.P.A. Bresciacarbon, carbon-manganese, alloy 54Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 120Blooms/Billets

Loc. Motta Alta 14Cividate Al Piano

STEELMAKINGBergamo Works

Tel: +39 363 97193/4 Fax: +39 363 976666 Email: mailto:[email protected] Web http://www.olifer.comCertificate No. MD00/1807/0007/1 Expiry date: 12/03/2015

A 25Normal StrengthFabricated SectionsPALESCANDOLO SPAPALESCANDOLO SPAPALESCANDOLO SPAPALESCANDOLO SPA NaplesAH32, AH36 25Higher Strength

Via Boscofangone, zone A.S.I., NolaTel. no. +39 0817340800; Fax. no.: +39 0817340454 Email: [email protected]; web: www.palescandolo.itCertificate No. MD00/3850/0002/1 Expiry date: 30/10/2016

As belowE.A.F./Ingot/Con CastSteelmakingRUBIERA SPECIAL STEEL S.p.A.RUBIERA SPECIAL STEEL S.p.A.RUBIERA SPECIAL STEEL S.p.A.RUBIERA SPECIAL STEEL S.p.A. Venicecarbon, carbon-manganese, alloy, NormalStrength, Higher Strength


carbon, carbon-manganese, alloy, NormalStrength, Highrer Strength

180Bars

42013 Casalgrande (RE)Via 25 Aprile, 64

Tel: +39 0522 997209 Fax: +39 0522 840040 Email: mailto:[email protected] Web http://www.acciaieriadirubiera.comAddress for orders: Rubiera Special Steel S.p.A. , Via San Cataldo, 115, 41100 Modena, Italy.Ingots as semi finished products nominal maximum diameter 1935mm x nominal maximum height 5250mm to the above maximum weight in normal strengthand higher strength grades are approved for further processing for rolled products and in carbon, carbon-manganese & alloy grades are approved for furtherprocessing for forgings.Bars as semi finished products nominal maximum length 9500mm to the above maximum thickness in normal strength and higher strength grades are approvedfor further processing for rolled products and in carbon, carbon-manganese & alloy grades are approved for further processing for forgings.Certificate Number: MD00/0038/0007/1 Expiry: 07/03/2016


30Higher StrengthSectionsSIDERVAL S.P.A.SIDERVAL S.P.A.SIDERVAL S.P.A.SIDERVAL S.P.A. Milan

Via Roma 39C23018 Talamona

Tel: +39 342 674125 Fax: +39 342 670400 Email: mailto:[email protected] Web: http://www.siderval.itCertificate No. MD00/2857/0004/1 Expiry date: 16/01/2014

Sondrio

JapanJapanJapanJapan

carbon, carbon-manganese, austenitic stainlessE.A.F. / IngotSteelmakingAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATION Kobealloy 190BarsSemi-FinishedA 180Normal StrengthBars304L, 316L 180Austenitic Stainlesscarbon, carbon-manganese, alloy, austeniticstainless

125Machinery


Arao-machiTokai-shi

Chita Plant1, Wano-Wari

Tel: +81 52 603 9353 Fax: +81 52 603 9898 Email: mailto:[email protected]: www.aichi-steel.co.jpCertificate No. MD00/0076/0007/1 Expiry date: 24/09/2015

Aichi-ken, 476-8666

304L, 316L 150Austenitic StainlessBarsAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATIONAICHI STEEL CORPORATION Kobe

Kariya-shiAichi-ken

Kariya Plant3-6, Toyota-cho

Tel +81 566 21 9130 Fax +81 566 23 6925 Email: mailto:[email protected] www. aichi-steel.co.jpCertificate No. MD00/0078/0006/1 Expiry date: 23/09/2015

448-0848

As belowE.A.F. / Con CastSteelmakingCHUBU STEEL PLATE CO., LTD.CHUBU STEEL PLATE CO., LTD.CHUBU STEEL PLATE CO., LTD.CHUBU STEEL PLATE CO., LTD. KobeA, B 50Normal StrengthPlates360AR, 410AR 40Boiler & Pressure Vessel

Nakagawa-kuNagoya

5-1, Kousudori

Tel: +81 52 661 3818 Fax: +81 52 661 2265 Email: mailto:[email protected] Web http://www.chubukokan.co.jpCertificate No. MD00/0309/0006/1 Expiry date: 20/04/2014







As belowE.A.F. / IngotSteelmakingDAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD. Kobecarbon, carbon-manganese 7Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 275Bloomscarbon, carbon-manganese 148Billetscarbon, carbon-manganese 270StructuralBars

39, Motohama-machiTokai-shi

Chita Plant

Tel: +81 562 33 3106 Fax: +81 562 33 6598 Email:[email protected] Web: http://www.daido.co.jpCertificate No. MD00/0372/0005/1 Expiry date: 21/03/2014

Aichi-ken

carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingDAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD.DAIDO STEEL CO., LTD. Yokohama

Shibukawa-shiGunma 377-0007

Shibukawa Plant500, Ishihara

Tel: +81 279 25 2009 Fax: +81 279 25 2043 Email: mailto:[email protected] No. MD00/0375/0007/1 Expiry date: 25/11/2015

As belowE.A.F. / Con CastSteelmakingGODO STEEL LTD.GODO STEEL LTD.GODO STEEL LTD.GODO STEEL LTD. Kobecarbon, carbon-manganese 490SlabsSemi-FinishedA 15Normal StrengthSectionsA 150Normal StrengthBarsU3 100Chain Cable StockU1, U2 150

Hyogo pref.

2946 Nakashima ShikamakuHimeji-city

Tel. +81 (0)792 34 9332 Fax +81(0)792 34 9538Certificate No. MD00/0606/0006/1 Expiry date: 06/08/2015

As belowE.A.F. / IngotSteelmakingHITACHI METALS, LTD.HITACHI METALS, LTD.HITACHI METALS, LTD.HITACHI METALS, LTD. KobeA 150Normal StrengthBarsalloy, austenitic stainless 150Structural

Yasugi-shiShimane-ken

Yasugi Works2107-2, Yasugi-cho

Tel: +81 (0) 854 22 1908 Fax: +81 (0)854 23 0281 Email mailto:[email protected] Web http://www.hitachi-metals.co.jpCertificate No. MD00/0678/0006/1 Expiry date: 19/12/2015

As belowE.A.F. / Con CastSteelmakingJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATION KobeNormal Strength, Higher Strength 300BloomsSemi-FinishedNormal Strength, Higher Strength 150BilletsB, D, E 25Normal StrengthSectionsA 32EH32, EH36 25Higher StrengthAH32, AH36, DH32, DH36 32

1280, Hosoe,Shikama-ku, Himeji-City,

Himeji Works

Tel +81 (0)792 35 6376 Fax +81 (0)792 35 2048 email: mailto:[email protected] Web: http://www.jfe-bs.co.jpThe scope of approval for semi-finished products includes for; billets nominal maximum width 150mm x nominal maximum length 8600mm; blooms nominalmaximum widths 220mm x nominal maximum length 10.000mm; approved for further processing for rolled products.Certificate Number: MD00/1535/0007/1 Expiry: 27/08/2015

Hyogo-Pref. 672-8064,

As belowE.A.F. / Con CastSteelmakingJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATIONJFE BARS & SHAPES CORPORATION Yokohamacarbon, carbon-manganese 150BilletsSemi-FinishedA 32Normal StrengthSectionsAH32, AH36, DH32, DH36 32Higher Strength

Ibaraki Pref.314-0111

Kashima Works7 Minamihama, Kamisu-city

Tel: +81 (0)299 90 5218 Fax: +81 (0)299 90 5201 Mob +81(0) 9050905201Email: mailto:[email protected] http://jfe-bs.co.jpSemi finished products as billets to nominal 150mm width and 12000mm nominal length to the maximum thickness shown above are approved for furtherprocessing for rolled products.Certificate No. MD00/1920/0006/1 Expiry date: 28/01/2014

As belowB.O.S. / Con CastSteelmakingJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATION KobeAs belowB.O.S. / Ingotcarbon, carbon-manganese, alloy 30Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 310Slabscarbon, carbon-manganese, alloy 750BloomsA, B, D, E 200Normal StrengthPlates







JapanJapanJapanJapanAH42, FH27S, FH32, FH36 50Higher StrengthPlatesJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATION KobeDH42, DH46, DH50, DH55, DH62, DH69, EH42,EH46, EH50, EH55, EH62, EH69

75

AH40, DH40, EH40 80AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

150

360AR, 410AR 40Boiler & Pressure Vessel360, 410 100360FG, 410FG, 460FG, 490FG, 510FG 1349Ni 40Ferritic Low TemperatureLTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36

50

304L, 316L 50Austenitic StainlessE/304L, E/316L 30CladA, B, D, AH27S, AH32, AH36, DH27S, DH32,DH36, EH27S, EH32, EH36

50Tapered

A, B, D, AH27S, AH32, DH27S, DH32 40Differential ThicknessA, B 16Normal StrengthHot Rolled Coil360, 410 16Boiler & Pressure VesselA, B, D 32Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

32Higher Strength

carbon, carbon-manganese 400StructuralBarsalloy 165Machinerycarbon-manganese 190U1, U2 130Chain Cable Stock

Kawasaki-DoriKurashiki

West Japan Works (Kurashiki)1 Mizushima

Tel: +81 (0)86 447 2652 Fax: +81 (0)86 447 2735 Email: mailto:[email protected] through thickness properties on all plate grades.Certificate No. MD00/0838/0013/1 Expiry date: 15/10/15

MQS Approved - Approval No. MQS 022

As belowB.O.S. / Con CastSteelmakingJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATION Kobecarbon, carbon-manganese, Normal strength,Higher Strength

300SlabsSemi-Finished

carbon, carbon-manganese, Normal Strength,Higher Strength

250Blooms/Billets

A, B, D, E 120Normal StrengthPlatesFH27S, FH32, FH36, FH40 80Higher StrengthEH47 85AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

100

360AR, 410AR 40Boiler & Pressure Vessel460FG, 490FG, 510FG 55360FG, 410FG 70LTAH27S, LTAH32, LTAH36, LTAH40,LTDH27S, LTDH32, LTDH36, LTDH40,LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,LTFH32, LTFH36


304L, 304LN, 316L, 316LN, 317L, 317LN 55Austenitic StainlessA to EH36/304L, A to EH36/316L 30CladA, DH34S, B, D, A,B, AH32, AH36, DH32,DH36, AH34S

50Differential Thickness

A, B, D, E 12Normal StrengthHot Rolled CoilAH27S, AH32 8Higher Strength460FG, 490FG 8Boiler & Pressure Vessel360, 410, 360FG, 410FG 12E 18Normal StrengthSectionsA, B, D 35AH40, DH40, EH40, FH27S, FH32, FH36 18Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

36

LTAH27S, LTAH32, LTAH36, LTAH40,LTDH27S, LTDH32, LTDH36, LTDH40,LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,LTFH32, LTFH36








Fukuyama-cityHiroshima-pref.

West Japan Works (Fukuyama)1, Kokan-cho

Tel. (0)84 945 3160 Fax (0)84 945 3101 EMail mailto:[email protected] Web http://www.jfe-steel.co.jp

TM + Acc = OLAC process

For differential thickness plates, the maximum thickness differential for a thickness of 50mm is 10mm for normal strength grades and 6mm for higher strengthgrades

Approved for the supply of plates with specified through thickness properties (Z25/Z35).

MQS Approved - Approval No. MQS 005


721-8510

As belowB.O.S. / Con CastSteelmakingJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATION YokohamaA, B, D, E 100Normal StrengthPlatesFH27S, FH32, FH36 42Higher StrengthAH42, DH42, EH42 83AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

90

360AR, 410AR 40Boiler & Pressure Vessel360, 410, 460FG, 490FG, 510FG 50360FG, 410FG 100LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


D, E 40Normal StrengthTapered Plates maxA, B 50AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, AH40, DH40, EH40

50Higher Strength

AH32, AH36 22Higher strengthTapered Plates max

Kawasaki-kuKawasaki

East Japan Works (Keihin)1-1, Ohgishima

Tel: +81 44 322 1185 Fax: +81 44 322 1510 Email: mailto:[email protected] plate grades with specified through thickness properties.Materials Quality Scheme Approved - Approval No. MQS 034Certificate No. D00/1056/0009/1 Expiry date: 29/10/2015

210-0868

austenitic stainlessB.O.S/V.O.D./Con CastSteelmakingJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATIONJFE STEEL CORPORATION Yokohamaaustenitic stainless 275SlabsSemi-Finished

Chuo-kuChiba 260-0835

East Japan Works (Chiba)1, Kawasaki-cho

Tel: +81 43 262 2287 Fax: +81 43 262 2980 Email to: [email protected]

Certificate No.: MD00/4065/0001/1 Expiry Date: 07/08/2015

As belowB.O.S. / Con CastSteelmakingKOBE STEEL LTD.KOBE STEEL LTD.KOBE STEEL LTD.KOBE STEEL LTD. KobeAs belowB.O.S. / IngotAs belowE.A.F. / Con CastAs belowE.A.F. / IngotA, B, D, E 150Normal StrengthPlatesDH42, DH50, DH55, DH62, DH69, EH42, EH50,EH55, EH62, EH69, FH40, FH42, FH46, FH50,FH55, FH62, FH69

50Higher Strength

AH46, DH46, EH46 60AH40, DH40, EH40 80FH27S, FH32, FH36 90AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100

360AR, 410AR, 460AR 40Boiler & Pressure Vessel360, 410, 460, 490, 460FG, 490FG, 510FG 90360FG, 410FG 100LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


A,B, D,E, HTS up to EH36 50Differential ThicknessA, B, D 13Normal StrengthHot Rolled Coil360FG, 410FG 13Boiler & Pressure Vessel







1 Kanazawa-choKakogawa-city

Kakogawa Works

Tel: +81 794 36 1151 Fax: +81 794 36 2079 Email: mailto:[email protected] grades with specified through thickness properties.Certificate No. MD00/0863/0009/1 Expiry date: 15/10/2015

Materials Quality Scheme Approved - Approval No. MQS 009

Hyogo-pref.

As belowB.O.S./Ingot/Con CastSteelmakingKOBE STEEL LTD.KOBE STEEL LTD.KOBE STEEL LTD.KOBE STEEL LTD. Kobecarbon, carbon-manganese, alloy 8Ingots (tonnes)Semi-FinishedCarbon, Carbon-Manganese, Alloy 600Rolled Bloomscarbon, carbon-manganese, alloy 250Semi-finished ProductsBarsA 250Normal Strengthcarbon, carbon-manganese, alloy 250MachineryU1, U2, U3 160Chain Cable Stock

Nada-kuKobe

Kobe Works2 Nadahama-Higashimachi

Tel +81 78 882 8056 Fax +81 78 882 8204 Email: mailto:[email protected] No. MD00/0864/0007/1 Expiry date: 08/08/2014

As belowE.A.F. / Con CastSteelmakingKYOEI STEEL LTD.KYOEI STEEL LTD.KYOEI STEEL LTD.KYOEI STEEL LTD. NagasakiA 16Normal StrengthSectionsA 53Normal StrengthBars

Sanyo-Onoda CityYamaguchi Prefecture

Yamaguchi DivisionOaza Onoda 6289-18

Tel: +81 836 83 6172 Fax: +81 836 83 0839 Email mailto:[email protected] Web http://www.kyoeisteel.co.jpCertificate No. MD00/1892/0006/1 Expiry date: 20/03/2016

756-0817

As belowE.A.F. / IngotSteelmakingMITSUBISHI STEEL MFG. CO., LTD.MITSUBISHI STEEL MFG. CO., LTD.MITSUBISHI STEEL MFG. CO., LTD.MITSUBISHI STEEL MFG. CO., LTD. Yokohamacarbon, carbon-manganese 16Ingots (tonnes)Semi-Finished

Hirota, Kawahigashi-machiAizuwakamatsu-city

Hirota Works405, Aza Rokucho

tel: +81 (0) 242 75 3111 Fax: +81 (0) 242 75 2619 Email mail to: [email protected] or [email protected] Web:http://www.mitsubishisteel.co.jpIngots nominal 2050mm diameter x nominal 1250mm length to the above maximum weight are approved for further processing forgings.Certificate Number: MD00/1802/0001/1 Expiry: 03/03/2015

Fukushima Pref. 969-3471

as below 20Ingots (tonnes)Semi-FinishedMITSUBISHI STEEL MURORAN INC.MITSUBISHI STEEL MURORAN INC.MITSUBISHI STEEL MURORAN INC.MITSUBISHI STEEL MURORAN INC. YokohamaAs below 515Blooms/Billetscarbon, carbon-manganese, alloy 270StructuralBarscarbon, carbon-manganese, alloy 210Machinery

Muroran shiHokkaido

Muroran Works12, Nakamachi

Tel: +81 (0)143 41 2831 Fax: +81 (0)143 41 2869 Email mailto:[email protected]: www.mitsubishisteel.co.jpCertificate No. MD00/1893/0007/1 Expiry date: 08/04/2016

050-0087

A 38Normal StrengthBarsNIHON STEEL CO., LTD.NIHON STEEL CO., LTD.NIHON STEEL CO., LTD.NIHON STEEL CO., LTD. Kobe11, Rinkai-choKishiwada City

tel: +81 724 23 5151 Fax: +81 724 39 8357 Email mailto:[email protected] xxxxxxxCertificate No. MD00/2299/0006/1 Expiry date: 10/03/2017

Osaka

304L, 304LN, 316L, 316LN, 317L, 317LN, 321,347, 304*, 316*

55Austenitic StainlessPlatesNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKIN Nagasaki

UNS S31803 40Duplex StainlessA/304L, D/304L, D/316L 40Clad







2108-1, Oaza Maeda Aza HatoYawata Higashi-ku

STAINLESS STEEL CORPORATIONYawata Works

* Grades 304,.and 316 may be accepted for approved applications.Tel; +81 93 672 2290 Fax: +81 93 672 2251 Email: mailto:[email protected]: ns-sc.co.jp/en/company/plants/yawata.phpCertificate No. MD00/1105/0009/1 Expiry date: 23/05/2015

Kitakyushu City, Fukuoka Pref.


E.A.F. / Con CastSteelmakingNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKINNIPPON STEEL & SUMIKIN Nagasaki

austenitic stainless 236SlabsSemi-Finished304L, 316L 8Austenitic StainlessPlates304L, 316L 8Austenitic StainlessHot Rolled Coil

3434 ShimataHikari City

STAINLESS STEEL CORPORATIONProduction Division, Hikari Works

Tel +81 833 71 5184 Fax +81 833 71 5215 Email: mailto:[email protected] Web: http://www.ns-sc.co.jpCertificate No. MD00/3196/0003/1 Expiry date: 25/10/2014

Yamaguchi 743-8550

As belowB.O.S. / Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Yokohama

As belowSlabsSemi-Finished

carbon, carbon-manganese 300

carbon, carbon-manganese, alloy 165Blooms/Billets


AH42, DH42, EH42, FH42 50Higher Strength

AH46, AH50, DH46, DH50, EH46, EH50, FH46,FH50, FH69*, EH69*

70

AH40, DH40, EH40, FH40 80

AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S, FH32, FH36

100


360FG, 410FG, 460FG, 490FG, 510FG 100

LHAH42, LTAH46, LTAH50, LTDH42, LTDH46,LTDH50, LTEH42, LTEH46, LTEH50, LTFH42,LTFH46, LTFH50


LTAH40, LTDH40, LTEH40, LTFH40 80


100

A,B,D,E, HTS up to EH40 50Tapered

A,B,D,E, HTS up to EH40 50Differential Thickness

A, B, D 24Normal StrengthSections


A, B 12Normal StrengthPlates from coils

360, 410 12Boiler and Pressure Vessel

A, B 25Normal StrengthHot Coiled Strip

360, 410 25Boiler & Pressure Vessel







Kimitsu-shiChiba-ken

Kimitsu Works1 Kimitsu

Materials Quality Scheme approved - MQS001

Semi Finished products include Carbon and Carbon-manganese as Fine Grain Al and Fine Grain Al+Nb slabs to 1500mm wide, to 10,400mm long (maximumweight 24T) and Carbon, Carbon-manganese and Alloy as Killed, Fine Grain Al and Fine Grain Al+Nb Blooms to 165mm diameter, to 11m long (amaximumweight 1.85T), all for further processing.

High strength fine grained Ti+Nb steel plates produced in the TM + Acc and TM + Acc + Temper conditions up to 70mm thickness are approved with Mn andAl contents to be outside that given in Lloyd's Register Materials Rules. Letter 'S' is used after identification number of non-standard composition materials.

Materials Quality Scheme covers Steelmaking and rolled plates only with exception of EH/FH69 grade. Strip, plate cut from coil, sections and EH/FH69 gradeapproved under Materials Survey Scheme (direct survey).

* Project specific approval only. Letter ref MAT/1100/GY/10641564 refers.

Tel: +81 (0)439 50 2194 Fax: +81 (0)439 55 8727 Email: mailto:[email protected] Web http://www.nsc.co.jp/kimitsu/


299-1141

As BelowB.O.S./E.A.F./Ingot/Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Yokohama

carbon, carbon-manganese, alloy 190BilletsSemi-Finished

A, B 200Normal StrengthBars

AH32, AH36, DH32 200Higher Strength

U1, U2, U3, R3, R3S, R4 136Chain Cable Stock

API-2F 152

Muroran CityHokkaido

Muroran Works12, Naka-machi

Tel: +81 (0)143 47 2337 Fax: +81 (0)143 47 2783 Email: maruyama.kenichi.nsc.co.jp Web: http://www.nsc.co.jp/muroranThe approval for bars intended for chain cable stock are for material rolled from continuous casting billets only.Bars for mooring grade chain cable stock in grades R3, R3S and R4 are restricted to Hamanaka Chain Mfg. Co. Ltd. Himeji plant only.Bars in Grade U3 in the above supply condition may be accepted up to 200mm diameter for the further processing for the production of forged chain cablefittings.Approval for billets, maximum 190mm x 190mm x 8000mm maximum weight 2.3 Tonnes, as semi finished products are for further processing for forgings.Certificate Number: MD00/1101/0011/1 Expiry date: 02/07/2014

050-8550

As belowB.O.S./Ingot/Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Kobe


FH27S 40Higher Strength

AH40, DH40 50

DH42, DH46, EH40, EH42, FH32, FH36, FH40,FH42

70

EH46, EH46S, FH46, FH46S 110

FH69* 120

DH50, DH55, DH62, DH69 200


210


360, 410 115

360FG, 410FG, 460FG, 490FG, 510FG 120









Tokai-machiTokai-city

Nagoya Works3, 5 Chome

Tel +81 52 603 7236 Fax +81 52 603 7229 Email: [email protected] grades and thicknesses with specified through thickness properties (Z35)Certificate No. MD00/1102/0012/1 Expiry date: 16/07/2016

Aichi Pref. 476-8686

As belowB.O.S. / Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Nagasaki


DH42, EH42, FH42 50Higher Strength

EH40S* 60

AH47, DH47, EH47, AH47-W430, DH47-W430,EH47-W430, EH47-W140, DH47-W140,AH47-W140

70

AH40, DH40, EH40, FH27S, FH32, FH36, FH40 80


100

360AR, 410AR, 460AR 40Boiler & Pressure Vessel

360, 410, 460, 490 90

360FG, 410FG, 460FG, 490FG, 510FG 100

LTAH27S, LTAH32, LTAH36, LTAH40,LTDH27S, LTDH32, LTDH36, LTDH40,LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,LTFH32, LTFH36, LTFH40


A, B, D, E, A,B,D,E, AH27S, AH32, AH36,DH27S, DH32, DH36, EH27S, EH32, EH36

50Tapered

A,B,D 35Differential Thickness

A,B, A,B,D,E, AH27S, AH32, AH36, DH27S,DH32, DH36, EH27S, EH32, EH36

50

A 12Normal StrengthHot Rolled Coil



Oita-CityOita-Prefecture

Oita Works1, Oaza Nishinotsu

Tel +81 97 553 2122 Fax +81 97 553 2379 Email: mailto:[email protected] Web http://www.nssmc.com/works/oita/index.html/All plates with specified through thickness properties except H47 grades.* Plates in LLF27 and LLF33 up to a maximum thickness of 40 mm can be accepted for approved applications.* Plates in EH40S are for approved applications only and may have a Nickel content up to 1.5% with a carbon equivalent of 0.4%. The Approved thicknessrange of EH40S is 30mm to 60mm.* Plates in the H47 grades to be produced to the agreed chemistry ranges and agreed max CEVs.

Materials Quality Scheme Approved - Approval No. MQS010Certificate No. MD00/1103/0016/1 Expiry date: 30/03/2016

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Yokohama

austenitic stainlessA.O.D./Con Cast


AH32S 30Higher Strength

FH27S 32

FH32, FH36 43

AH42, AH46, AH50, AH55, AH62, DH42,DH46, DH50, DH55, DH62

47

AH36S, AH40S, DH36S, DH40S, EH36S, EH40S 50

AH36, AH40, DH36, DH40, EH27S, EH32,EH36, EH40

105

AH27S, AH32, DH27S, DH32 150







JapanJapanJapanJapan 150Higher StrengthPlatesCORPORATIONCORPORATIONCORPORATIONCORPORATION


510FG 55

360, 410, 460, 490 63

360FG, 410FG, 460FG, 490FG 100

3.5Ni, 5Ni 30Ferritic Low Temperature


45

EH36/304L, EH36/316L 38Clad

EH27S, EH32, EH36 32Differential Thickness

A,B,D, AH27S, AH32, AH36, DH27S, DH32,DH36

35

A, B, D, E 35Normal StrengthSections

AH40, DH40, EH27S, EH32, EH36 18Higher Strength

DH27S, DH32, DH36 20

AH27S, AH32, AH36 35

A, B, D 19Normal StrengthHot Coiled Strip

360FG, 360, 410FG, 410 19Boiler & Pressure Vessel

Kashima CityIbaraki Pref.

Kashima Works3 Hikari

Tel +81 (0)299 84 2573 Fax +81 299 84 2945Email mailto: [email protected] Web http://www.sumitomometals.co.jpAll plates with specified through thickness properties.

Materials Quality Scheme Approved - Approval No. MQS 002

SMI's Fatigue Crack Arrester (FCA) grades by the DAC process with parent plate fatigue crack growth rates guaranteed by the manufacturer and tested inaccordance with ASTM E647 may be accepted for approved applications. Properties are to be as agreed with the Society. This acceptance does not implyconcessions on either design or survey requirements.

SMI's High Welding Heat Input Steel, may be accepted for approved applications, in all higher tensile strength grades up to EH40, in the TM + ACC conditionup to 105 mm thickness, when used in accordance with SMI's guidelines for welding or line heating. This acceptance does not imply concessions on eitherdesign or survey requirements.

SMICORE, may be accepted for approved applications, in all higher tensile strength grades up to EH36, in the TM condition up to 20mm thickness and the TM+ ACC condition up to 30 mm thickness. The steel is to have a guaranteed CRL of 0.5 or less and to be of approved composition. This acceptance does notimply concessions on either design or survey requirements.(Note CRL = Corrosion Ratio by Long term test)Certificate No. MD00/1454/0019/1 Expiry date: 08/07/2016

314-0014

A 240Normal StrengthBarsNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Kobe

1, Nishino-choHigashi-Mukojima

Pipe & Tube UnitAmagasaki Works

Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: mailto:[email protected] No. MD00/1458/0008/1 Expiry date: 13/11/2016

Amagasaki, 660-0856

carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Kobe

austenitic stainlessA.O.D./Con Cast

1850 MinatoWakayama-city

Wakayama Works

Tel: +81 (0) 73451 1133 Fax: +81 734 51 1103 EMail: mailto:[email protected] Sales fax +81 34416 6789 Web: www.sumitomometals.co.jpCertificate No. MD00/1748/0010/1 Expiry date: 25/06/2016

640-8555







A, B, D, E 50Normal StrengthSectionsNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALNIPPON STEEL & SUMITOMO METALCORPORATIONCORPORATIONCORPORATIONCORPORATION

Kobe

AH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength

Sakai cityOsaka

Wakayama Works [Sakai Area]1, Chikko Yawata-cho Sakai-Ku

Tel: +81 722 33 1179 Fax: +81 722 33 1185 Certificate No. MD00/4141/0004/1 Expiry: 08/07/2015

As belowE.A.F. / Con CastSteelmakingNIPPON YAKIN KOGYO Co., Ltd.NIPPON YAKIN KOGYO Co., Ltd.NIPPON YAKIN KOGYO Co., Ltd.NIPPON YAKIN KOGYO Co., Ltd. YokohamaAs below, austenitic stainless 200SlabsSemi-Finished321, 347 10Austenitic StainlessPlates304L, 316L 53Fe-36Ni* 8Fe-Ni alloys304L, 316L, 321, 347 8Austenitic StainlessHot Rolled CoilFe-36Ni* 3Fe-Ni alloys

Kawasaki-kuKawasaki-shi

KAWASAKI PLANT4-2, Kojima-cho

Tel: +81 44 271 3045 Fax: +81 44 271 3034Email mailto:[email protected] Web http//www.nyk.co.jp* accepted for approved applicationsCertificate No. MD00/1109/0007/1 Expiry date: 01/06/2015

Kanagawa - ken 210-8558

As belowE.A.F. / Con CastSteelmakingNISSHIN STEEL CO., LTD.NISSHIN STEEL CO., LTD.NISSHIN STEEL CO., LTD.NISSHIN STEEL CO., LTD. Kobe304L, 316L, 321, 347 8Austenitic StainlessHot Rolled Coil

Hekinan-shiAichi- ken

Kinuura Works1, Hama-cho

Tel: +81 566 48 7218 Fax: +81 566 48 1596 Email: mailto:[email protected] No. MD00/2338/0007/1 Expiry date: 26/05/2014

447-8610

As belowE.A.F. / Con CastSteelmakingOJI STEEL CO., LTD.OJI STEEL CO., LTD.OJI STEEL CO., LTD.OJI STEEL CO., LTD. Yokohamacarbon, carbon-manganese 170BilletsSemi-FinishedA 25Normal StrengthBarsAH32, AH36 25Higher Strength

Ota-cityGunma Pref.

Gunma Works120, Nittasorimachi-cho

Tel: +81 276 56 2119 Fax: +81 276 56 3136 Email: mailto:[email protected]: www. oji-steel.co.jpCertificate No. MD00/1141/0006/1 Expiry date: 15/10/2014

370-0313

AE.A.F. / Con CastSteelmakingOSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD. KobeA 190Blooms/BilletsSemi-FinishedA 15Normal StrengthSections

1 Chikko Yawata-choSakai

Sakai Works

Tel +81 722 33 3901 Fax +81 722 33 3976Certificate No. MD00/0821/0008/1 Expiry date: 20/06/2016

Osaka

As belowE.A.F. / Con CastSteelmakingOSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD.OSAKA STEEL CO., LTD. Kobecarbon, carbon-manganese, Normal Strength,Higher Strength

165Blooms/BilletsSemi-Finished

A, B, D 15Normal StrengthSectionsAH32, AH36 12Higher Strength

9-3 Minami Okajima 1 ChomeTaisho-ku

Osaka - Okajima Works

Tel: +81 06 6552 1447 Fax: +81 06 6552 3184 Email: [email protected] :www.osaka-seitetu.co.jpCertificate No. MD00/1157/0006/1 Expiry date: 20/05/2016

Osaka 551-0021







alloy, austenitic stainlessE.A.F. / Con CastSteelmakingSANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD.,SANYO SPECIAL STEEL CO., LTD., KobeAs belowE.A.F. / Ingotcarbon, carbon-manganese, austenitic stainless 15Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy, austeniticstainless

380Blooms

A 220Normal StrengthBarsalloy 125MachineryU1, U2, U3 136Chain Cable Stock

Shikama-kuHimeji-shi

3007 Nakashima

Tel: +81 (0)792 35 6029 Fax: +81 (0)792 35 6027 email: [email protected] web: www.sanyo-steel.co.jp

Heat treatment sub contracted to Toyo Metal Treating Corporation, Takasago Plant No. 2, Takasago, Hyogo Pref., Japan.


672-8677

As belowE.A.F. / Con CastSteelmakingSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATION KobeA, B, D 38Normal StrengthSectionsAH32, AH36, DH32, DH36 38Higher Strength

5, Shiohama-choSakai

Sakai Works

Tel: +81 (0)72 228 5121 Fax: +81 (0)72 228 7119 Email: mailto:[email protected] Web: http://www.shinkansai-steel.co.jpCertificate No. MD00/0823/0006/1 Expiry date: 15/11/2014

Osaka

As belowE.A.F. / Con CastSteelmakingSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATIONSHINKANSAI STEEL CORPORATION KobeA, B, D 32Normal StrengthSectionsAH32, AH36, DH32, DH36 32Higher StrengthU1, U2, U3 80Chain Cable StockBars

4-26-1, Hoshida KitaKatano-shi

Hoshida Works

Tel: +81 (0)72 891 0624 Fax: +81 (0)72 893 1319 Email mailto:[email protected] Web http://www.shikansai-steel.co.jpCertificate No. MD00/1244/0007/1 Expiry date: 06/10/2015

As belowE.A.F. / IngotSteelmakingTHE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD.THE JAPAN STEEL WORKS, LTD. YokohamaA, B, D, E 50Normal StrengthPlatesAH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50304L, 316L 65Austenitic StainlessAH32/304L, AH32/316L, AH32/316LN,AH32/317L

19Clad

AH32/S31803 30A/304L, B/304L, D/304L, E/304L, A/316L,B/316L, D/316L, E/316L

100

MuroranHokkaido

Muroran Plant4, Chatsu-machi

Tel +81 (0)143 22 0539 Fax +81 (0)143 22 5736 email: [email protected] web: www.jsw.co.jpCertificate No. MD00/1507/0007/1 Expiry date: 10/11/2015

051-8505

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingTOKAI SPECIAL STEEL CO., LTD.TOKAI SPECIAL STEEL CO., LTD.TOKAI SPECIAL STEEL CO., LTD.TOKAI SPECIAL STEEL CO., LTD. Kobecarbon, carbon-manganese 370BloomsSemi-Finishedcarbon, carbon-manganese 155Billets

Tokai-MachiTokai-shi

3, 5-Chome

Tel +81 52 603 7236 Fax +81 52 603 7229 email: [email protected]


Aichi-ken

As belowE.A.F. / Con CastSteelmakingTOKYO STEEL MANUFACTURING CO., LTD.TOKYO STEEL MANUFACTURING CO., LTD.TOKYO STEEL MANUFACTURING CO., LTD.TOKYO STEEL MANUFACTURING CO., LTD. NagasakiA, B, D 32Normal StrengthPlates360AR, 410AR 32Boiler & Pressure VesselA 24Normal StrengthSections







Wakamatsu-kuKitakyusyu City

Kyushu Plant3-5-1, Minami-Futajima

Tel: +81 93 701 2631 Fax: 81 93 791 2639 Email: mailto:[email protected] Web http://www.tokyosteel.co.jpCertificate No. MD00/1550/0008/1 Expiry date: 29/06/2014

Fukuoka 808-0109

As belowE.A.F. / Con CastSteelmakingTOPY INDUSTRIES, LTD.TOPY INDUSTRIES, LTD.TOPY INDUSTRIES, LTD.TOPY INDUSTRIES, LTD. KobeE 20Normal StrengthSectionsA, B, D 35AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S, FH32, FH36

20Higher Strength



A, B, D, E 50Normal StrengthBarsAH32, AH36, DH32, DH36, EH32, EH36 50Higher Strength

1, Akemi-choToyohashi-shi

Toyohashi Works

Tel +81 532 25 1111 Fax +81 532 25 7401 Email: mailto: [email protected] web: http://www.topy.co.jpCertificate No. MD00/1555/0007/1 Expiry date: 17/06/2014

Aichi-ken

As belowE.A.F. / Con CastSteelmakingYAMATO STEEL CO., LTD.YAMATO STEEL CO., LTD.YAMATO STEEL CO., LTD.YAMATO STEEL CO., LTD. KobeA, B, D, E 25Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

25Higher Strength

380, Kibi, Ohtsu-kuHimeji City

Tel: +81 (0)79 273 0716 Fax: +81 (0)79 272 0914 Email mailto: [email protected] Web:http://www.yamatokogyo.co.jpCertificate No. MD00/1687/0009/1 Expiry date: 21/06/2014

Hyogo-pref.

KoreaKoreaKoreaKorea

304L, 304LN, 316L, 316LN, 317L, 317LN, 321,347

8Austenitic Stainless SteelPlates from coilsBUSAN STEEL CO., LTD.BUSAN STEEL CO., LTD.BUSAN STEEL CO., LTD.BUSAN STEEL CO., LTD. Busan Port

1538-2, Songjung-DongGangseo-GuTel: +82 51 (0)3251131 Certificate No. MD00/4028/0001/1 Expiry date: 24/06/2015

304L, 304LN, 316L, 316LN 80Austenitic StainlessPlatesDK CORPORATIONDK CORPORATIONDK CORPORATIONDK CORPORATION UlsanUNS S31803, UNS 32900*, UNS 32205* 50Duplex Stainless

#612-1, Go Hyun RiChung Ha Myun

Tel: +82 54 245 3063 Fax: +82 54 245 3065 Email:mailto:[email protected] Web:http://www.dkcsteel.com*accepted for approved applicationsThe scope of approval is for the heat treatment and final testing of plates only from rolled plates supplied from approved works.Certificate Number: MD00/2230/0006/1 Expiry: 28/05/2016

Buk-Ku, Pohang Gyeongsangbuk-do

carbon-manganeseE.A.F. / Con CastSteelmakingDONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd. Ulsancarbon-manganese 480Blooms/BilletsSemi-FinishedD, E 50Normal StrengthPlatesA, B 83AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S, FH32, FH36

50Higher Strength

460FG, 490FG, 510FG 35Boiler & Pressure Vessel360AR, 410AR 40360FG, 410FG 50LTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


D 25Normal StrengthSectionsA, B 32AH27S, DH32 25Higher StrengthAH32, DH27S 32







880 Songdong-RiDaesong-Myun, Nam-Gu

Pohang Works

Tel: +82 542 715687 Fax: +82 023 179055email: [email protected] web: www.dongkuk.comCertificate No. MD00/0414/0013/1 Expiry date: 14/05/2016

Billets to 150 x 150mm, Blooms to 200 x 250 & 250 x 300, Beam Blanks to 400 x 480 x 120mm.

Pohang City, Kyungsangbuk-Do

E 83Normal StrengthPlatesDONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd.DONGKUK STEEL MILL Co. Ltd. SeoulA, B, D 100AH32, AH36, AH40, DH32, DH36, DH40, EH32,EH36, EH40

83Higher Strength

460AR 35Boiler & Pressure Vessel360AR, 410AR 40490FG 50460FG, 510FG 70360FG, 410FG 100

400, Hanjin-ri,Songak-eup, Dangjin-kun,

Dangjin Works

Tel: +82 (0) 41 351 4679 Fax: +82 (0) 41 317 9083 Email: [email protected] Web: http://www.dongkuksteel.co.krPlates in the Normalised supply condition Fine Grain Al+V are only accepted in the thickness range >30mm to 70mm.Plates with specified through thickness properties may be accepted with the suffix Z35 applied to Normal Strength Grades A to D in the Normalised FineGrain Al. Certifcate Number: MD00/3773/0008/1 Expiry: 12/04/2016

Chungnam

A 20Normal StrengthPlates from coilsDONGYANG S.TEC. CO., LTDDONGYANG S.TEC. CO., LTDDONGYANG S.TEC. CO., LTDDONGYANG S.TEC. CO., LTD Ulsan#619-12, Munduk-Ri,Ocheon-Eup Nam-Gu,

Tel: +82 54 292 6181 Fax: +82 54 291 6548Email: [email protected] www.dystec.co.krCertifcate Number: MD00/3840/0003/1 Expiry date: 26/09/2016

Pohang-city, Kyeongbuk,

As belowE.A.F. / IngotSteelmakingDOOSAN HEAVY INDUSTRIES & CONSTRUCTIONDOOSAN HEAVY INDUSTRIES & CONSTRUCTIONDOOSAN HEAVY INDUSTRIES & CONSTRUCTIONDOOSAN HEAVY INDUSTRIES & CONSTRUCTIONCO., LTD.CO., LTD.CO., LTD.CO., LTD.

Changwon



ChangwonKyungnam

Changwon Plant555, Guygok-dong

Tel +82 55 278 4591 Fax no. +82 55 278 8506Email [email protected] www.doosan.comCertificate No. MD00/0883/0001/1 Expiry date 09/03/2013

641-792

B, D, E 18Normal StrengthSectionsFINE BESTEEL CO LTDFINE BESTEEL CO LTDFINE BESTEEL CO LTDFINE BESTEEL CO LTD ChangwonA 30AH27S, AH32, AH36 30Higher Strength

25-1 Ha-Ri, Changnyeong-Up,Changnyeong-Gun,

Tel: +82 (0)55 259 2000 / 2064 Fax: +82 (0)55 259 2060Email: [email protected] www.fine-besteel.comCertificate No. MD00/3659/0004/1 Expiry date: 08/09/2015

Gyeongnam,

As belowE.A.F./Ingot/Con CastSteelmakingHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY Seoulcarbon, carbon-manganese, alloy 125Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 270Bloomscarbon, carbon-manganese 200BilletsA, B 32Normal StrengthSectionsAH27S, AH32, AH36 32Higher Strength

63, Jungbong-DaeroDong-Gu

Inchon Plant

Tel: +82 32 760 2753 Fax: +82 32 760 2866 Email: [email protected] Web: http://www.hyundai-steel.comSections flat bars up to 400 mm width.


Inchon







As belowE.A.F. / Con CastSteelmakingHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY Ulsancarbon, carbon-manganese, alloyBlooms/BilletsSemi-FinishedB, D, E 18Normal StrengthSectionsA 37AH27S, AH40, DH27S, DH40, EH27S, EH32,EH36, EH40, FH27S, FH32, FH36, FH40

18Higher Strength

AH32, AH36, DH32, DH36 37LTAH27S, LTAH32, LTDH27S, LTDH32,LTEH27S, LTEH32, LTFH27S, LTFH32, LTFH36,LTFH40


R3S, R4 110Chain Cable StockBarsU1, U2, U3, R3 150

444 Songnae-DongNam-Gu

Pohang Plant No. 1

Tel: +82 54 271 1479 Fax: +82 54 271 1512 Email: mailto:[email protected] Web: http://www.hyundai-steel.comCertificate No. MD00/0819/0014/1 Expiry date: 05/06/2016

Pohang

carbon-manganeseE.A.F. / Con CastSteelmakingHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY UlsanA, B, D 16Normal StrengthSectionsAH27S, AH32, AH36 16Higher Strength

1857 Jang Heung-DongPohang Plant No. 2

Tel No. +82 54 271 1479 Fax No. +82 54 271 1512Email mailto:[email protected]: www.hyundai-steel.com Certificate No. MD00/3084/0006/1 Expiry date: 05/06/2016

As BelowB.O.S./E.A.F./Con CastSteelmakingHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY SeoulNormal strength, Higher Strength 300SlabsSemi-FinishedA, B 22Normal StrengthHot Rolled CoilAH32, AH36 22Higher StrengthA, B 22Normal StrengthPlates from coilsAH32, AH36 22Higher Strength

Songak-eupDangjin-si

HR Coil Plant1480, Bukbusaneop-ro

Tel: +82 41 680 1691 Fax +82 41 680 1699 Email; [email protected] Web: http://www.hyundai-steel.comSlabs with nominal 2200mm width x nominal 4400mm length Certificate No. MD00/3446/0004/1 Expiry date: 23/03/2017

Chungncheongnam-do

A, B, D, E 100Normal StrengthPlatesHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANYHYUNDAI STEEL COMPANY SeoulFH27S, FH32, FH36 80Higher StrengthAH47, DH47, EH47 83AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

100

360AR, 410AR, 460AR 40Boiler & Pressure Vessel460FG, 490FG 83360FG, 410FG 100LTDH27S, LTDH32, LTDH36, LTFH27S,LTFH32, LTFH36


Songak-EupDangjin-Si

Dangjin Works1480, Bukbusaneop-ro

Tel: +82 41 680 1690 or 1685 Fax +82 41 680 1699 Email; [email protected] Web: http://www.hyundai-steel.com

Approval for plates in grades AH27S, AH32, AH36, 360AR, 410AR, and 460AR as rolled fine grain Al+V are restricted to the thickness range 20.0mm to35.0mm.Approval for plates in grades AH27S, AH32, AH36, AH40, DH27S, DH32, DH36, DH40, EH27S, EH32, EH36, EH40 for the TM+Acc fine grain Al+Nb+Tisupply condition are restricted to the thickness range >15.0mm to 83.0mm.Approval for plates in grades LTDH27S, LTDH32, LTDH36, LTFH27S, LTFH32, LTFH36 for the TM+Acc fine grain Al+Nb+Ti supply condition are restricted tothe thickness range >15.0mm to 40.0mm.Approval for plates in Normalising Rolled condition are restricted to maximum 3200mm width.Plates with specified through thickness properties may be accepted with the suffix Z35 applied to; Normal Strength Grades A & B in the As-Rolled Fine Grain Al supply condition, Grades A to D in the Normalised Fine Grain Al+Nb+V supply condition andGrades A to E in the TM+Acc Fine Grain Al+Nb+Ti supply condition; Higher Strength Grades in the TM+acc Fine Grain Al+Nb+Ti supply condition and TMFine Grain Al+Nb+Ti supply condition; Ferritic Low Temperature Grades LTDH27S to LTFH36 Fine Grain Al+Nb+Ti in the Thermo Mechanical or TM+Accsupply condition as applicable to approved thickness.Plates in grades AH47, DH47 and EH47; FG Al+Nb+Ti; TM+Acc; are restricted to supply in the thickness range 50mm to the maximum indicated above.Certificate Number: MD00/3761/0011/1 Expiry: 24/03/2016

Chungcheongnam-do







alloy 120MachineryBarsJEENYANG IND. Co., Ltd.JEENYANG IND. Co., Ltd.JEENYANG IND. Co., Ltd.JEENYANG IND. Co., Ltd. Ulsan

Yeongcheon-City,Keongbuk,

446, Bonchon-Dong

Tel: +82 (0)54 335 3500 Fax: +82 (0)54 335 0355 Email: [email protected] Web: www.jysteel.com

Cert No MD00/3897/0001/1 Expiry date: 23/03/2014

As belowE.A.F. / IngotSteelmakingKISCOKISCOKISCOKISCO Changwoncarbon, carbon-manganese, alloy 140Ingots (tonnes)Semi-Finished

N° 70, Shinchon-dongChangwon

Tel +82 55 260 0746 Fax +82 55 282 4123 mail mailto:[email protected] Web page http://www.kisco.co.krIncluding steelmakingCertificate No. MD00/0884/0004/1 Expiry date: 12/01/2015

Kyungnam

A 15Normal StrengthSectionsKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTD Busan PortAH32, AH36, DH32, DH36, EH32, EH36 15Higher StrengthA 65Normal StrengthBarsAH32 30Higher Strength

84, Noksansandan 407-Ro,Gangseo-Gu

Noksan Works

Tel: +82 51 310 8912 Fax: +82 51 831 3951email [email protected] web www.ekosco.com


Busan,

As belowE.A.F. / Con CastSteelmakingKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTDKOREA STEEL SHAPES CO., LTD ChangwonA, AH32, AH36, carbon, carbon-manganese 220BilletsSemi-Finished

68, Gyenae-Ri, Chilseo-MyeonHaman-Gun

Chilseo Works

Tel: +82 55 589 1159 Certificate No. MD00/3097/0001/1 Expiry date: 11/10/2014

Gyeongnam

austenitic stainless 85MachineryBarsKWANG JIN IND CO. LTD.KWANG JIN IND CO. LTD.KWANG JIN IND CO. LTD.KWANG JIN IND CO. LTD. Busan Portalloy 93carbon, carbon-manganese 100

307-103 Shinpyeong-dong,Saha-gu,

Tel No: +82 51 220 9262 Fax No. +82 51 204 9172Email: [email protected] Address www.kjsteel.co.krCert No MD00/3758/0002/1 Expiry date 14.03.2016

Busan,604-030

As belowB.O.S. / Con CastSteelmakingPOSCO Gwangyang WorksPOSCO Gwangyang WorksPOSCO Gwangyang WorksPOSCO Gwangyang Works ChangwonNormal strength, Higher Strength 300SlabsSemi-FinishedA, B, D, E 100Normal StrengthPlatesEH47 80Higher StrengthAH27S, AH32, AH36, AH62, AH69, DH27S,DH32, DH36, DH62, DH69, EH27S, EH32,EH36, EH62, EH69

100

360AR, 410AR, 360FG, 410FG, 460FG, 490FG,510FG


A, B, D 22Normal StrengthHot Rolled CoilAH27S, AH32, AH36, DH27S, DH32, DH36 12Higher Strength360AR, 410AR 12Boiler & Pressure Vessel

700 Kumho-dongKwangyang-si

Tel: +82 61 790 2170 Fax: +82 61 790 2909 Email: mailto:[email protected] Web: http://www.posco.comApproved for semi-finished products, slabs, nominal 1750mm wide x 6000mm long.Hot rolled coils in normal strength grades in the supply condition thermomechanical fine grain aluminium are restricted to the thickness ranges >12 to 22mm.Certificate Number: MD00/3086/0009/1 Expiry: 14/07/2014

Cheonnam 545-711

As BelowB.O.S./E.A.F./Con CastSteelmakingPOSCO Pohang WorksPOSCO Pohang WorksPOSCO Pohang WorksPOSCO Pohang Works UlsanNormal strength, Higher Strength 300SlabsSemi-FinishedA, B, D, E 100Normal StrengthPlatesAH47, DH47, EH47 80Higher StrengthFH27S, FH32, FH36 83AH40, DH40, EH40 90AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100

360AR, 410AR 40Boiler & Pressure Vessel460FG, 490FG, 510FG 90







KoreaKoreaKoreaKorea360FG, 410FG 100Boiler & Pressure VesselPlatesPOSCO Pohang WorksPOSCO Pohang WorksPOSCO Pohang WorksPOSCO Pohang Works UlsanLTAH27S, LTAH32, LTAH36, LTDH27S,LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,LTFH27S, LTFH32, LTFH36


304L, 304LN, 316L, 316LN 80Austenitic StainlessUNS S31803, UNS 32900*, UNS 32205* 50Duplex StainlessE 12Normal StrengthHot Rolled CoilA, B, D 22EH27S, EH32, EH36 16Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36 22460FG, 490FG, 510FG 12Boiler & Pressure Vessel360FG, 410FG 22304L, 316L 8Austenitic Stainless

5, Dongcheon-DongNam-ku, Pohang City,

Tel: +82 2 3457 3838 Fax: +82 2 3457 6000 email: [email protected] web: www.posco.com

All plates accepted with specified through thickness properties except AH47, DH47 and EH47.Slabs as semi-finished products nominal maximum width 2200mm x nominal maximum length 5000mm to the above maximum thickness are approved forfurther processing for rolled products.Certificate No. MD00/1206/0016/1 Expiry date: 30/04/2016

Kyungsangbuk-Do

As belowE.A.F. / IngotSteelmakingPOSCO SPECIALITY STEEL CO., LTD.POSCO SPECIALITY STEEL CO., LTD.POSCO SPECIALITY STEEL CO., LTD.POSCO SPECIALITY STEEL CO., LTD. Changwonduplex stainless 17Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy, austeniticstainless

150

carbon, carbon-manganese, alloy, duplexstainless

150StructuralBars

austenitic stainless 170carbon, carbon-manganese, alloy 150Machinery

Seongsan-GuChangwon,

147,Jeokhyeon-Ro

Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Email:mailto:[email protected] http://www.poscoss.comCertificate No. MD00/1294/011/1 Expiry date: 09/08/2014

Gyeongnam

A 18Normal StrengthPlates from coilsS & STEEL CO., LTD.S & STEEL CO., LTD.S & STEEL CO., LTD.S & STEEL CO., LTD. Busan PortAH27S, AH32 15Higher Strength

1620 Dadae-dong, Saha-guBusanTel: +82 51 262 7525 Fax: +82 51 924 7902 Email: [email protected] Web: http://www.sdstl.co.krCertificate No. MD00/3523/0004/1 Expiry date: 25/09/2014

As belowE.A.F. / IngotSteelmakingSPP YULCHON ENERGY CO., LTD.SPP YULCHON ENERGY CO., LTD.SPP YULCHON ENERGY CO., LTD.SPP YULCHON ENERGY CO., LTD. Mokpocarbon, carbon-manganese, alloy 50Ingots (tonnes)Semi-Finished

Block 8, Yulchon Industrial Complex l, Sinseong-riHaeryong-myeon, Suncheon City, Jeollanam-do

Tel: +82 61 760 7100 Fax: +82 61 725 7733 Email: [email protected] Web: http://www.sppycenergy.co.krIngots as semi finished products are approved for further processing for forgings, nominal maximum dimensions 1630/1850mm diameter x 2850mm long, to theabove maximum weight. Certificate Number: MD00/3866/0002/1 Expiry date: 13/12/2016

Zip code: 540856

As belowE.A.F./Ingot/Con CastSteelmakingSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATIONSeAH BESTEEL CORPORATION Mokpoalloy 109Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 155carbon, carbon-manganese, alloy 510Bloomscarbon, carbon-manganese 180Billetsalloy 350Barscarbon, carbon-manganese, alloy 300MachineryBarsR5 140Chain Cable StockR4S, R4S 146R4 155U1, U2, U3, R3, R3S 165







Gunsan CityJeonlabuk-Do

Gunsan Plant1-6, Soryong-Dong

Tel: +82 63 460 8222 Fax: +82 63 460 8099 Email: mailto:[email protected] Web:http://www.egs.seah.co.krApproval for Chain Cable Stock Grades R3, R3S, R4, R4S and R5 is restricted to supply to DAI HAN ANCHOR CHAIN MFG CO. LTD and Grades R3, R3Sand R4 to Pu Sung Metal Co., Ltd.Semi Finished Products - Ingots, Carbon & Carbon-manganese nominal sizes 2100 / 2350mm diameter x 2800mm long, and Alloy nominal sizes 2350 / 2600mmdiameter x 3050mm long, to the above maximum weight approved for further processing for forgings. Semi Finished Products - Blooms to nominal 390mm width x 5400mm length, to above maximum thickness approved for further processing for Forgings andRolled Products. Semi Finished Products - Billets to nominal 180 width x 11500mm length, to above maximum thickness approved for further processing for Rolled Products.Alloy grade bars as semi-finished products nominal maximum length 12,000mm to the above maximum diameter are approved for further processing for forgedproducts.Certificate No. MD00/1749/0012/1 Expiry date: 04/04/2015

As belowB.O.S. / Con CastSteelmakingYK STEEL CORP.YK STEEL CORP.YK STEEL CORP.YK STEEL CORP. Busan PortA 7Normal StrengthSectionsA 32Normal StrengthBars

Saha-Gu604-817

90 Gupyung-Dong

Tel. +82 (0)51 260 2457 Fax +82 (0)51 265 2430 Email:mailto:[email protected] Web: http://www.yksteel.co.krCertificate No. MD00/0650/0007/1 Expiry date: 26/05/2014

Busan

LuxembourgLuxembourgLuxembourgLuxembourg

As belowE.A.F. / Con CastSteelmakingARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGE LyonNormal Strength, Higher Strength 100BloomsSemi-FinishedA, B 26Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

26Higher Strength

66 rue de LuxembourgL4009 Esch sur Alzette

BELVAL MILLTMB Rolling Plant

Tel: +352 58 2885 Fax: +352 5835 81 Contact: Mr MullerEmail: mailto:[email protected]:www.arcelor.comCertificate #: MD00/0030/0007/1 Expiry date: 05/11/2015

As belowE.A.F. / Con CastSteelmakingARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGEARCELORMITTAL BELVAL ET DIFFERDANGE LyonHigher Strength 135BloomsSemi-FinishedA, B 40Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

40Higher StrengthSections

L 4009 Esch sur AlzetteDifferdange Mill

Tel: +352 58 2028 85 Fax: +352 5835 81 Email: mailto:[email protected] Web http://www.arcelormittal.comBeam Blanks as semi-finished products (referred to as blooms above) nominal 500nn overall width x nominal 1150mm overall length, to the above overallmaximum thickness are approved for further processing for rolled products.Certificate Number: MD00/0032/0007/1 Expiry: 11/03/2016

A, B, D 30Normal StrengthSectionsARCELORMITTAL RODANGE ET SCHIFFLANGEARCELORMITTAL RODANGE ET SCHIFFLANGEARCELORMITTAL RODANGE ET SCHIFFLANGEARCELORMITTAL RODANGE ET SCHIFFLANGE LyonAH36, DH36 30Higher Strength

2, Rue de L'industrieL-4801 Rodange

Rodange Mill

Tel: +352 5019 2655 Fax: +352 5019 2217 Email: mailto:[email protected] Web http://www.ares.luCertificate No. MD00/2266/0005/1 Expiry date: 18/01/2013 "SUSPENDED"







MacedoniaMacedoniaMacedoniaMacedonia

A 35Normal StrengthFabricated SectionsFAKOM A.D.FAKOM A.D.FAKOM A.D.FAKOM A.D. BeogradAH36, DH36, EH36 40Higher Strength

POB 4391000 SKOPJE

St. Aleksandar Makedonski No.5

Tel No.: +389 317 4023, Fax: +389 317 3564 email: mailto:[email protected] Web http://www.fakom.com.mkCertificate No. MD00/2856/0007/1 Expiry date: 27/11/2015

As belowE.A.F. / Con CastSteelmakingMAKSTIL A.D.- SKOPJEMAKSTIL A.D.- SKOPJEMAKSTIL A.D.- SKOPJEMAKSTIL A.D.- SKOPJE BeogradA, B, D 100Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36 50Higher Strength360AR, 410AR, 460AR 40Boiler & Pressure Vessel360, 410, 460, 490, 460FG, 490FG, 510FG 50360FG, 410FG 100

XVI Makedonska brigada 18P.O. Box 599

Tel: +389 2 328 7130 Fax: +389 2 3287017 Email mailto:[email protected] Web http://www.makstil.comSpecified through thickness properties for plates up to 50 mm thicknessCertificate No. MD00/2216/0007/1 Expiry date: 22/05/2016

1000-Skopje

MalaysiaMalaysiaMalaysiaMalaysia

A 30Normal StrengthPlatesJI KANG DIMENSI Sdn. Bhd.JI KANG DIMENSI Sdn. Bhd.JI KANG DIMENSI Sdn. Bhd.JI KANG DIMENSI Sdn. Bhd. Kuala Lumpur

26100 KuantanPahang Darul Makmur

Lot 69-71, Kawasan Perindustrian Gebeng

Tel: +609 583 9881 Fax: +609 583 4551 Email: mailto: [email protected]: www.jikangdimensi.comCertificate No. MD00/3022/0004/1 Expiry date: 28/06/2015

MexicoMexicoMexicoMexico

carbon, carbon-manganeseE.A.F. / Con CastSteelmakingARCELORMITTAL LAZARO CARDENAS, S.A. deARCELORMITTAL LAZARO CARDENAS, S.A. deARCELORMITTAL LAZARO CARDENAS, S.A. deARCELORMITTAL LAZARO CARDENAS, S.A. deC.V.C.V.C.V.C.V.

Metepec/Veracruz


60950- Lázaro CárdenasMichoacan

Av Francisco J. Mujica N° 1-B

Steel types carbon and carbon-manganese cover the supply of blooms for processing into normal strength, high strength and ferritic steels for low temperatureservice according to the Society's Rules for the Manufacture, Testing and Certification of Materials, Chapter 3. The final processing mill is responsible forordering steel which complies with their approved chemical composition and enables them to achieve the required mechanical properties

Tel: +52 753 533 1871 Fax: +52 753 533 1187 Email:[email protected] Web http://www.arcelormittalsteel.comCertificate No. MD00/0783/0006/1 Expiry date: 09/01/2014

NorwayNorwayNorwayNorway

carbon, carbon-manganeseE.A.F. / Con CastSteelmakingCELSA ARMERINGSSTÅL ASCELSA ARMERINGSSTÅL ASCELSA ARMERINGSSTÅL ASCELSA ARMERINGSSTÅL AS OsloA, carbon, carbon-manganese 160BilletsSemi-Finished

PO Box 500N-8601 Mo i Rana

Mo Industripark

Tel: +47 7513 6500 Fax: +47 7513 6845 Email: mailto:[email protected] Web http://www.celsanordic.comCertificate No. MD00/2103/0005/1 Expiry date: 07/09/2014







PolandPolandPolandPoland

A, B, D, E 25Normal StrengthPlates''HUTA POKÓJ'' S.A.''HUTA POKÓJ'' S.A.''HUTA POKÓJ'' S.A.''HUTA POKÓJ'' S.A. Katowice360AR, 410AR, 360, 410, 360FG, 410FG 25Boiler & Pressure VesselA, B, D, E 25Normal StrengthSections

ul. Niedurnego 7941-709 Ruda SlaskaTel +48 32 772 4110 or +48 602 593 445 Fax +48 32 772 4856 Email: [email protected] Web: http://www.hutapokoj.euCertificate Number: MD00/0723/0008/1 Expiry: 10/12/2015


E.A.F. / IngotSteelmakingALCHEMIA S.A.ALCHEMIA S.A.ALCHEMIA S.A.ALCHEMIA S.A. Katowice



ul.Dyrekcyjna 641-506 Chorzów

ZAKLAD HUTA BATORY

Tel: +48 32 77 22 237 Fax:+48 32 77 22 060email: :[email protected] web: www.alchemiasa.pl


As belowB.O.S. / Con CastSteelmakingARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A. Katowicecarbon, carbon-manganese 220SlabsSemi-FinishedA, B, D 15Normal StrengthHot Rolled CoilAH27S, AH32 16Higher StrengthA, B, D 15Normal StrengthPlates from coilsAH27S, AH32 16Higher Strength410 FG, 360 FG, 460 FG 16Boiler and Pressure Vessel

30-969 Kraków

ODDZIAL W KRAKOWIEul. Ujastek 1

Tel: +48 12 290 1817 Fax: +48 12 290 5591email: [email protected] web: www.arcelormittal.com/poland

Slabs as semi finished products are approved for further processing for rolled products to the maximum thickness shown above and nominal 1580mm widthand 11000mm length.Coils and plates are approved to maximum 2100mm width.


carbon, carbon-manganese, alloyB.O.S. / Con CastSteelmakingARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A.ARCELORMITTAL POLAND S.A. Katowicecarbon, carbon-manganese 300SlabsSemi-Finishedcarbon, carbon-manganese, Alloy 280Blooms/BilletsB, D, E 15Normal StrengthSectionsA 20

41-308 Dabrowa Gornicza

Oddzial w Dabrowie GorniczejAl. J. Pilsudskiego 92

Tel: +48 32 776 87 14 Fax: +48 32 776 84 86 Email [email protected] Web: http://www.arcelormitta.com/poland/Approved for ingots, and continuously cast products for re- rolling in all the normal and higher tensile strength grades.Certificate No. MD00/0717/0010/1 Expiry date: 06/02/2015

As belowE.A.F./Ingot/Con CastSteelmakingARCELORMITTAL WARSZAWA Sp. z.o.o.ARCELORMITTAL WARSZAWA Sp. z.o.o.ARCELORMITTAL WARSZAWA Sp. z.o.o.ARCELORMITTAL WARSZAWA Sp. z.o.o. Katowicecarbon, carbon-manganese, alloy 25Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese, alloy 220Blooms/Billetscarbon, carbon-manganese, alloy 65StructuralBarscarbon, carbon-manganese, alloy 65Machinery

ul. Kasprowicza 13201-949 WarszawaTel: +48 22 835 8081 Fax: +48 22 835 8638Email: mailto:[email protected] Web: http://www.arcelormittal-warszawa.comCertificate No. MD00/0720/0007/1 Expiry date: 02/08/2015

As belowE.A.F. / IngotSteelmakingCELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o.CELSA "HUTA OSTROWIEC" Sp. z o.o. Katowicecarbon, carbon-manganese, alloy 130Ingots (tonnes)Semi-Finished

ul. Samsonowicza 227-400 Ostrowiec Swietokrzyski

ZAKLAD WYROBOW KUTYCH

Tel: +48 (0)41 2492390 Fax: +48 (0)41 2493779 EMail:[email protected] Web page http://www.celsaho.comCertificate No. MD00/2006/0007/1 Expiry date: 25/10/2016Ingots size maximum 130 MT 2.33 m diameter







As belowE.A.F. / Con CastSteelmakingCMC ZAWIERCIE S.A.CMC ZAWIERCIE S.A.CMC ZAWIERCIE S.A.CMC ZAWIERCIE S.A. Katowicecarbon, carbon manganese 160Blooms/BilletsSemi-Finished

ul. Pilsudskiego 8242-400 ZawiercieTel: +48 32 672 57 55 Fax: +48 32 672 57 59 Email: [email protected] Web: www.cmcpoland.comCertificate No. MD00/3594/0003/1 Expiry date: 06/05/2015

Includes billets/blooms up to 185 x 160mm.

As belowE.A.F. / Con CastSteelmakingFERROSTAL LABEDY Sp. z o.o.FERROSTAL LABEDY Sp. z o.o.FERROSTAL LABEDY Sp. z o.o.FERROSTAL LABEDY Sp. z o.o. Katowicecarbon, carbon-manganese, alloy 160BilletsSemi-Finishedcarbon, carbon-manganese, alloy 170Bars

ul. Zawadzkiego 4744-109 GliwiceTel: +48 32 234 7600 Fax: +48 32 234 7650 EMail mailto:[email protected] Web page http://www.ferrostal.com.plThe semi finished products above are approved for use for further processing for the finished products defined above.Certificate No. MD00/2307/0005/1 Expiry date: 31/03/2014

As belowE.A.F./Ingot/Con CastSteelmakingHSW - HUTA STALI JAKOSCIOWYCH SAHSW - HUTA STALI JAKOSCIOWYCH SAHSW - HUTA STALI JAKOSCIOWYCH SAHSW - HUTA STALI JAKOSCIOWYCH SA Katowicecarbon, carbon-manganese, alloy 15Ingots (tonnes)Semi-FinishedCarbon, Carbon-Manganese, Alloy 130Rolled Billetscarbon, carbon manganese, Alloy 270Blooms/BilletsCarbon, Carbon manganese, Alloy 120Rolled BarsA, B, D, E 120Normal StrengthBarsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

120Higher Strength

carbon, carbon-manganese, alloy 120Structuralcarbon, carbon-manganese, alloy 120MachineryU1, U2, U3 110Chain Cable Stock

ul. Kwiatkowskiego 137-450 Stalowa WolaTel: +48 15 813 53 20 Fax: +48 15 872 21 55 Email: mailto:[email protected] Web: http://www.hsw-hsj.com.plCertificate No. MD00/2406/0006/1 Expiry date: 23/05/2014

Carbon, Carbon-Manganese, Alloy 300Rolled BilletsSemi-FinishedHUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o.HUTA BANKOWA Sp. z o.o. KatowiceCarbon, Carbon-manganese, Alloy 250Rolled Round BarsA, B 20Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36 20Higher Strengthcarbon, carbon-manganese 250StructuralBarscarbon, carbon-manganese, alloy 250MachineryU1, U2 160Chain Cable Stock

ul. Sobieskiego 2441-300 Dabrowa GórniczaTel +48 32 295 7430 Fax +48 32 262 3788 Email: [email protected];[email protected] Web http://www.hutabankowa.com.plCertificate No. MD00/0716/0008/1 Expiry date: 04/03/2016

A, B, D, E 100Normal StrengthPlatesHW PIETRZAK HOLDING Sp. z o.o.HW PIETRZAK HOLDING Sp. z o.o.HW PIETRZAK HOLDING Sp. z o.o.HW PIETRZAK HOLDING Sp. z o.o. KatowiceAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100Higher Strength

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 100A/304L 50Clad

41-506 Chorzów

Oddzial Walcownia Blach Batory w Chorzowieul. Lesna 42

Tel: +48 604936263 or +48 32 7722525 email: [email protected]: www.pietrzak-holding.pl

All plates with specified through thickness propertiesCertificate No. MD00/2766/0007/1 Expiry date: 17/10/2016

A, B, D, E 40Normal StrengthSectionsINTERSPEED TRADE Sp. z.o.o.INTERSPEED TRADE Sp. z.o.o.INTERSPEED TRADE Sp. z.o.o.INTERSPEED TRADE Sp. z.o.o. KatowiceAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S

40Higher Strength

27-400 Ostrowiec SwietokrzyskiAleja Solidarnosci 12

Tel: +48 (0)41 266 0700; +48 695 385 015 Fax: +48 (0)41 266 0701 Email: mailto:[email protected] Web page http://www.interspeed.com.plCertificate No. MD00/2007/0007/1 Expiry date: 25/07/2014

As belowE.A.F. / Con CastSteelmakingISD HUTA CZESTOCHOWA Sp. z o.o.ISD HUTA CZESTOCHOWA Sp. z o.o.ISD HUTA CZESTOCHOWA Sp. z o.o.ISD HUTA CZESTOCHOWA Sp. z o.o. Katowicecarbon, carbon-manganese 250SlabsSemi-Finishedcarbon, carbon-manganese 280BloomsE 50Normal StrengthPlatesA, B, D 75AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

360AR, 410AR, 460AR, 460FG, 490FG, 510FG 50Boiler & Pressure Vessel360FG, 410FG 75







42-207 Czestochowaul. Kucelinska 22

Above plate grades may also be supplied with Z25/Z35 through thickness property requirements.

Tel: +48 34 323 8147 Fax: +48 34 323 0034 Email: maito:[email protected] Web: http://www.isd- hcz.com.plCertificate No. MD00/0713/0011/1 Expiry date: 06/04/2015

carbon, carbon-manganese, alloy 150StructuralBarsWALCOWNIE BRUZDOWE "BATORY" Sp. z.o.o.WALCOWNIE BRUZDOWE "BATORY" Sp. z.o.o.WALCOWNIE BRUZDOWE "BATORY" Sp. z.o.o.WALCOWNIE BRUZDOWE "BATORY" Sp. z.o.o. Katowicecarbon, carbon-manganese, alloy 150Machinery

41-500 Chorzówul. Zelazna 22

Tel: +48 32 772 2698 Fax: +48 32 772 2250 Email:[email protected] Web:http://www.wbb.net.plCertificate No. MD00/3545/0002/1 Expiry date: 01/12/2014

RomaniaRomaniaRomaniaRomania

As belowB.O.S./Ingot/Con CastSteelmakingARCELORMITTAL GALATI S.A.ARCELORMITTAL GALATI S.A.ARCELORMITTAL GALATI S.A.ARCELORMITTAL GALATI S.A. GalatzA, B, D, E 100Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

100Higher Strength


800698 GalatiSos Smardan Nr.1

Tel: +40 236 802100 Fax: +40 236 802101 Email: mailto:[email protected] Web page http://www.arcelormittal.comApproval includes for plates with specified through thickness properties, designation Z25, in all grades up to 60 mm thickness in the normalized condition.Certificate No. MD00/0333/0008/1 Expiry date: 00/12/2016

As belowE.A.F. / Con CastSteelmakingCOS TARGOVISTE S.A.COS TARGOVISTE S.A.COS TARGOVISTE S.A.COS TARGOVISTE S.A. Galatzcarbon, carbon manganese, Alloy 150Blooms/BilletsSemi-FinishedU1, U2, U3 95Chain Cable StockBars

Sos. Gaiesti, 9-11Jud Dambovita, 130087

Targoviste

Tel: +40 758 837 264 Fax: +40 245 213 322 email: [email protected] Web: www.cos-tgv.ro


carbon, carbon-manganese, alloy 250E.A.F. / IngotSteelmakingDOOSAN IMGB S.ADOOSAN IMGB S.ADOOSAN IMGB S.ADOOSAN IMGB S.A Galatzcarbon, carbon-manganese, alloy 250Ingots (tonnes)Semi-Finished

Berceni Road Nr. 104Sector 4

Tel: +40 21 301 2549 Fax: +40 21 301 2502 Email: mailto:[email protected]


041919 Bucharest

carbon, carbon-manganese 120E.A.F. / IngotSteelmakingS.C. FORTUS S.A.S.C. FORTUS S.A.S.C. FORTUS S.A.S.C. FORTUS S.A. GalatzBd. Poitiers Nr. 10700671 IASITel: +40 232 222023 Fax: +40 232 220370 Email: mailto: [email protected] Web: http://www.fortus-iasi.roCertificate No. MD00/1258/0003/1 Expiry date: 12/04/2014

A 50Normal StrengthSectionsS.C. LAMINORUL S.A. - BRAILAS.C. LAMINORUL S.A. - BRAILAS.C. LAMINORUL S.A. - BRAILAS.C. LAMINORUL S.A. - BRAILA GalatzAH27S, AH32, AH36 12Higher StrengthA 50Normal StrengthBars

810461 BrailaSos. Industria Sarmei nr. 2

Tel +40 239 68 5597 Fax +40 239 66 9387 Email: mailto:[email protected] Web http://www.laminorul.roCertificate No. MD00/1916/0007/1 Expiry date: 30/03/2015

As belowE.A.F. / Con CastSteelmakingS.C. SILCOTUB S.A.S.C. SILCOTUB S.A.S.C. SILCOTUB S.A.S.C. SILCOTUB S.A. Galatzcarbon, carbon-manganese, alloy 260Blooms/BilletsSemi-Finished

Prelungirea Bucurestiului Str. No.162910125

TENARIS GROUPSteel Shop Calarasi

Tel +40 242306 600 Fax No.Web Address www.tenaris.comCertificate No. MD00/3997/0001/1 Expiry date: 27/02/2015

Calarasi







carbon, carbon-manganeseE.A.F. / Con CastSteelmakingSC DUCTIL STEEL SASC DUCTIL STEEL SASC DUCTIL STEEL SASC DUCTIL STEEL SA Galatzcarbon, carbon-manganese 100BilletsSemi-Finished

str. Mihai Eminescu, No 10,cod 325700,loc Otelu Rosu

Punct de lucru Otelu-Rosu

Tel No: +40 (0)255 532 239 Fax: +40 (0) 255 532 054Email: [email protected] www.ductilsteel.roCertificate No: MD00/ 3888/ 0001/ 1 Expiry Date 10/03/2014

jud.Caras Severin

carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingTMK-RESITA S.A.TMK-RESITA S.A.TMK-RESITA S.A.TMK-RESITA S.A. Galatzalloy 177BilletsSemi-Finishedcarbon, carbon-manganese 280

Traian Lalescu No. 36Caras-SeverinTel: +40 (0)255 217211 Fax: +40 (0)255 211883 Email: office.resita.tmk-artrom.roWeb http://www.tmk-artrom.roCertificate No. MD00/3804/0002/1 Expiry date: 07/07/2016

RussiaRussiaRussiaRussia

A, B, D 14Normal StrengthSections"RM - steel" Ltd."RM - steel" Ltd."RM - steel" Ltd."RM - steel" Ltd. St. PetersburgAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36

14Higher Strength

11, Sedova street192019, St PetersburgTel: +7 812 318 0015 Fax: +7 812 568 0015 Email: mailto:[email protected] Web http//www.rm-steel.comCertificate No. MD00/1910/0009/1 Expiry date: 15/01/2017

carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingCHELYABINSK METALLURGICAL PLANT OAOCHELYABINSK METALLURGICAL PLANT OAOCHELYABINSK METALLURGICAL PLANT OAOCHELYABINSK METALLURGICAL PLANT OAO St. Petersburgcarbon, carbon-manganese, alloy 20Ingots (tonnes)Semi-Finished

2-d Paveletskaya ul, 14454047- Chelyabinsk

Tel; +7 351 725 30 24 Fax: +7 351 722 86 29 Email mailto:[email protected] supllied as semi finished products are for further processing for forgings.Certificate No. MD00/3262/0004/1 Expiry date: 11/08/2015

A, B, D, E 40Normal StrengthPlatesJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTAL St. PetersburgEH27S, EH32 32Higher StrengthAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH40

40

360, 410 32Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 40

30 Mira Street162699 Cherepovets

Rolling Mill 2800

Tel: +7 8202 531146 Fax: +7 8202 53 2424 EMail: mailto:[email protected] Web http://www.severstal.ruPlates in the As Rolled, Normalized, Quenched and Tempered conditions with specified through thickness properties.Plates in the Normalizing rolled condition to 2200mm maximum width.Certificate #: MD00/0298/0010/1 Expiry date : 13/06/2016

Vologda Region

A 15Normal StrengthPlatesJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTAL St. PetersburgA, B, D, E 12Normal StrengthHot Rolled CoilAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

12Higher Strength

360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 12Boiler & Pressure Vessel

30 Mira StrRolling Mill 2000

Tel: +7 8202 53 11 46 Fax: +7 8202 53 24 24 EMail: mailto:[email protected] Web http://www.severstal.ruCertificate No. MD00/2801/0007/1 Expiry date: 13/06/2016

D, E 50Normal StrengthPlatesJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTAL St. PetersburgA, B 70AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

70Higher Strength

"IZHORSKIE ZAVODY"196651 Kolpino

Rolling Mill 50001, Lenina Prospect

Tel: +7 8202 53 11 46 Fax: +7 8202 53 24 24 EMail: mailto:[email protected] Web http://severstal.ruPlates with specified through thickness propertiesCertificate #: MD00/2802/0006/1 Expiry date: 13/06/2016

St Petersburg







As belowB.O.S. / Con CastSteelmakingJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTALJ.S.C. SEVERSTAL St. PetersburgAs belowE.A.F. / Con Castcarbon, carbon-manganese 315SlabsSemi-Finished

30, Mira Street162699 Cherepovets

B.O.S and E.A.F Workshops

Tel: +7 8202 53 11 46 Fax: +7 8202 53 24 24 EMail: mailto:[email protected] Web http://severstal.ruCertificate #: MD00/3821/0002/1 Expiry date: 13/06/2016

Vologda Region

carbon, carbon-manganeseB.O.S. / Con CastSteelmakingJOINT STOCK COMPANY«EVRAZ NIZHNY TAGILJOINT STOCK COMPANY«EVRAZ NIZHNY TAGILJOINT STOCK COMPANY«EVRAZ NIZHNY TAGILJOINT STOCK COMPANY«EVRAZ NIZHNY TAGIL St. PetersburgNormal strength, Higher Strength 300SlabsSemi-Finished

1, Metallurgov Str.,Nizhny Tagil,

METALLURGICAL PLANT»

Tel:+007 3435 490611 Fax:+007 3435 496169 Email:mailto:[email protected] Web http://www.ntmk.ruCertificate No. MD00/2660/0006/1 Expiry date: 05/04/2015

Sverdlovsk Region, 622025

carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingJSC AMURMETALJSC AMURMETALJSC AMURMETALJSC AMURMETAL St. Petersburgcarbon, carbon-manganese, alloy 200SlabsSemi-Finishedcarbon, carbon-manganese, alloy 125Billets

30, Vagonnaya Str681000 Komsomolsk-on-AmureTel No. 007 4217 52 9333 Fax No. 007 4217 52 9333Email: [email protected]: www.amurmetal.ruCertificate No. MD00/3588/0002/1 Expiry: 10/03/2015

As belowO H / IngotSteelmakingJSC KIROVSKIY ZAVODJSC KIROVSKIY ZAVODJSC KIROVSKIY ZAVODJSC KIROVSKIY ZAVOD St. Petersburgcarbon, carbon-manganese 120Semi-finished ProductsBars

47 Stachek Prospect198097 St. Petersburg

Petrostal Steel Works

Tel: +7 812 783 6813 Fax: +7 812 783 6504 Email mailto:[email protected] Web: http://www.petrostal.spb.ruCertificate No. MD00/1751/0006/1 Expiry: 30/01/2015

As belowB.O.S. / Con CastSteelmakingOJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works" St. Petersburgcarbon, carbon-manganese 250SlabsSemi-Finished

93, Kirova Street455000 Magnitogorsk

Steel Making and Central Laboratory

Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: [email protected] Web http://www.mmk.ruApproval covers for slabs as detailed above to nominal width 2520mm and nominal length 7000mm.Certificate No. MD00/3103/0004/1 Expiry date: 26/08/2016

A 10Normal StrengthHot Rolled CoilOJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg360AR, 410AR 10Boiler & Pressure Vessel

Rolling Mill 2000Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: [email protected] Web http://www.mmk.ruCertificate No. MD00/3834/0002/1 Expiry date: 26/08/2016

A 25Normal StrengthPlatesOJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg360AR, 410AR 25Boiler & Pressure Vessel


A 10Normal StrengthHot Rolled CoilOJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg360AR, 410AR 10Boiler & Pressure Vessel


A 50Normal StrengthPlatesOJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works"OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg360AR, 410AR 40Boiler & Pressure Vessel

Rolling Mill 4500Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: [email protected] Web http://www.mmk.ruThe approved minimum thickness is 30.0mmCertificate No. MD00/3837/0002/1 Expiry date: 26/08/2016

As belowB.O.S. / Con CastSteelmakingOJSK Novolipetsk Iron & Steel CorporationOJSK Novolipetsk Iron & Steel CorporationOJSK Novolipetsk Iron & Steel CorporationOJSK Novolipetsk Iron & Steel Corporation MoscowNormal strength, Higher Strength 355SlabsSemi-FinishedA, B, D 16Normal StrengthHot Rolled CoilAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH36, EH40

12Higher Strength

460FG, 490FG 10Boiler & Pressure Vessel360, 410, 360FG, 410FG 16







Pl. Metallurgov 2, NLMKLipetsk

398040, Russia

Tel: +7 4742 444688 Fax: +7 4742 441111Email:mailto:[email protected] Web:http://www.nlmk.ru Telex: 412630NLMK RUCertificate No. MD00/1124/0006/1 Expiry date: 06/11/2016

carbon, carbon-manganeseE.A.F. / Con CastSteelmakingOSKOLOSKOLOSKOLOSKOL St. Petersburgcarbon, carbon-manganese, Normal Strength,Higher Strength


U1, U2, U3 80Chain Cable StockBars

Belgorod Region

ELECTROMETALLURGICAL KOMBINAT309515 Stary Oskol-15

Tel +07 4725 375364 Fax +07 4725 373755 [email protected] Web http://www.oemk.ruBlooms as semi finished products; normal strength and higher strength; nominal 300mm maximum width x nominal 12,000mm maximum length are approvedfor further processing for rolled products.Blooms as semi finished products; carbon and carbon-manganese; nominal 300mm maximum width x nominal 12,000mm maximum length are approved forfurther processing for bars for chain cable stock..Certificate Number: MD00/3065/0005/1 Expiry: 25/02/2016

As belowO H / IngotSteelmakingURAL STEEL Open Joint-Stock CompanyURAL STEEL Open Joint-Stock CompanyURAL STEEL Open Joint-Stock CompanyURAL STEEL Open Joint-Stock Company St. PetersburgAs belowE.A.F./Ingot/Con CastB, D 40Normal StrengthPlatesA 50AH32, AH36 40Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 40Boiler & Pressure Vessel

NovotroitiskOrenburg Region

1, Zavodskaya Street

Tel: +7 3537 66 20 66 Fax: +7 3537 66 25 27 Email: mailto:[email protected] Web: http://www.uralsteel.comCertificate No. MD00/2337/0007/1 Expiry date: 25/05/2014

462353

SerbiaSerbiaSerbiaSerbia

As belowB.O.S. / Con CastSteelmakingZELEZARA SMEDEREVO D.O.O.ZELEZARA SMEDEREVO D.O.O.ZELEZARA SMEDEREVO D.O.O.ZELEZARA SMEDEREVO D.O.O. BeogradAs below 200SlabsSemi-FinishedA, B, D 15Normal StrengthHot Rolled CoilA, B, D 15Normal StrengthPlates from coils

Radinac11300 SmederevoTel: +381 26 224 429 Fax: +381 26 225 069 email: mailto:[email protected] No. MD00/0360/0006/1 Expiry date: 16/03/2016

Slovak RepublicSlovak RepublicSlovak RepublicSlovak Republic

A, B, D, E, AH32, AH36, DH32, DH36, EH32,EH36

B.O.S. / Con CastSteelmakingU.S. STEEL KOSICE, s.r.o.U.S. STEEL KOSICE, s.r.o.U.S. STEEL KOSICE, s.r.o.U.S. STEEL KOSICE, s.r.o. Prague

carbon, carbon-manganese 220Ingots (tonnes)Semi-FinishedA, B 12Normal StrengthPlates360AR, 410AR 12Boiler & Pressure VesselA, B, D 12Normal StrengthHot Rolled Coil360, 410, 360FG, 410FG 12Boiler & Pressure Vessel

Vstupny areal U.S. Steel044 54 KosiceTel: +421 55 673 4731 Fax: +421 55 675 4731 Email: mailto:[email protected] Web: http:www.usske.skCertificate No. MD00/1649/0006/1 Expiry date: 18/06/2014

Semi-finished products in carbon and carbon-manganese steels in all normal strength grades and higher tensile strength grades up to EH36 with maximumdimensions 1540mm wide to 12000mm long and thickness as stated.

As belowB.O.S. / Con CastSteelmakingZELEZIARNE PODBREZOVA A.S.ZELEZIARNE PODBREZOVA A.S.ZELEZIARNE PODBREZOVA A.S.ZELEZIARNE PODBREZOVA A.S. Praguecarbon, carbon manganese 280Blooms/BilletsSemi-Finished

Kolkáreñ 35976 81 PodbrezovaTel: +421 48 645 4040 Fax: +421 48 645 4041 email: [email protected] web: www.zelpo.sk








SloveniaSloveniaSloveniaSlovenia

carbon, carbon-manganeseE.A.F. / Con CastSteelmakingACRONI, d.o.o.ACRONI, d.o.o.ACRONI, d.o.o.ACRONI, d.o.o. Zagrebaustenitic stainlessB.O.S/V.O.D./Con Castcarbon, carbon-manganese, austenitic stainless 250SlabsSemi-FinishedA, B, D, E 40Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

40Higher Strength

360AR, 410AR, 360, 410, 360FG, 410FG, 460FG,490FG, 510FG


304L, 316L, 317L, 321, 347 70Austenitic Stainless

Cesta Borisa Kidrica 44SI - 4270 Jesenice

Member of Slovenian Steel Group

Tel: +385 4 584 1040 Fax: +385 4 584 1068 Email: mailto:[email protected] Web: http://www.acroni.si Certificate No. MD00/1391/0008/1 Expiry date: 25/10/2016

carbon, carbon-manganese, austenitic stainlessE.A.F. / IngotSteelmakingMETAL RAVNE d.o.o.METAL RAVNE d.o.o.METAL RAVNE d.o.o.METAL RAVNE d.o.o. ZagrebA, B 20Normal StrengthSectionsA, B 120Normal StrengthBars

2390 Ravne na KoroškemKoroška cesta 14

Tel: +386 2 870 7200 Fax: +386 2 870 7219 Email: mailto:[email protected] Web: http://www.metalravne.comCertificate No. MD00/2889/0004/1 Expiry date: 01/06/2014

South AfricaSouth AfricaSouth AfricaSouth Africa

As BelowB.O.S./E.A.F./Con CastSteelmakingARCELORMITTAL SOUTH AFRICA LTD.ARCELORMITTAL SOUTH AFRICA LTD.ARCELORMITTAL SOUTH AFRICA LTD.ARCELORMITTAL SOUTH AFRICA LTD. JohannesburgAs below 240SlabsSemi-FinishedB, D, E 30Normal StrengthPlatesA 50AH32, AH36, DH32, DH36, EH32, EH36, FH32,FH36

30Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 30Boiler & Pressure Vessel360AR, 410AR 40LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,LTEH36, LTFH32, LTFH36


Delfos BoulevardVanderbijlpark, 1911

Vanderbijlpark Steel

Tel +27 (0)16 889 2657 Fax +27 (0)16 889 5019 Email: mailto:[email protected] Web:http://www.arcelormittal.comCertificate No. MD00/1404/0008/1 Expiry date: 08/05/2014

PO Box 2, Vanderbijlpark 1900

As belowB.O.S. / Con CastSteelmakingEVRAZ HIGHVELD STEEL & VANADIUM,EVRAZ HIGHVELD STEEL & VANADIUM,EVRAZ HIGHVELD STEEL & VANADIUM,EVRAZ HIGHVELD STEEL & VANADIUM, Durbancarbon, carbon-manganese 250SlabsSemi-FinishedA 50Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

40Higher Strength

360AR, 410AR, 360FG, 410FG, 460FG, 490FG,510FG


A 12Normal StrengthHot Rolled Coil360, 410 12Boiler & Pressure VesselA, B 50Normal StrengthSectionsA, B 50Normal StrengthBars

Witbank1035

P.O. Box 111

Tel. +27 (0)13 690 9911/ 9623 Fax. +27 (0)13 690 9559EMail mailto:[email protected] http://www.highveld.co.za Certificate No. MD00/0672/0006/1 Expiry date: 02/07/2016

Mpumalanga







SpainSpainSpainSpain

As belowE.A.F. / Con CastSteelmakingACERINOX EUROPA S.A.U.ACERINOX EUROPA S.A.U.ACERINOX EUROPA S.A.U.ACERINOX EUROPA S.A.U. Cadiz304L, 316L, 321, 347 50Austenitic StainlessPlates304L, 316L, 321, 347 20Austenitic StainlessCoil

11379 Los BarriosCadiz

Palmones

Tel: +34 956 629474 Fax: +34 956 629311email: [email protected] web: www.acerinox.com


austenitic stainlessE.A.F. / Con CastSteelmakingACEROS INOXIDABLES OLARRA S.A.ACEROS INOXIDABLES OLARRA S.A.ACEROS INOXIDABLES OLARRA S.A.ACEROS INOXIDABLES OLARRA S.A. Bilbao304L, 316L, 321 100Austenitic StainlessBars

Larrabarri, 148150 Larrondo-Loiu

Tel: +34 617 464 872 Fax: +34 944 531 392email: [email protected] web: www.olarra.comCertificate No. MD00/1753/0006/1 Expiry date: 08/09/2015

Vizcaya

As belowE.A.F. / IngotSteelmakingACERÍA DE ALAVA, S.A.ACERÍA DE ALAVA, S.A.ACERÍA DE ALAVA, S.A.ACERÍA DE ALAVA, S.A. Bilbaocarbon, carbon-manganese, alloy, austeniticstainless, duplex stainless, Ferritic StainlessSteel*, Martensitic Stainless Steel*


carbon, carbon-manganese, alloy, austeniticstainless, duplex Stainless, Ferritic StainlessSteel*, Martensitic Stainless Steel*

470Billets

carbon, carbon-manganese, alloy, austeniticstainless, duplex stainless, Ferritic StainlessSteel*, Martensitic Stainless Steel*

470Bars

carbon, carbon-manganese, alloy, austeniticstainless, duplex stainless, ferritic stainless*,martensitic stainless*

360StructuralBars

01470 AmurrioAlava

(ACERALAVA)Poligono Industrial De Saratxo

Tel: +34 94 671 93 00 Fax: +34 94 672 50 62email: [email protected]

* accepted for approved applications.Approval also includes ingots in above grades up to 5 tonne.


carbon, carbon-manganeseB.O.S. / Con CastSteelmakingARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑA Gijoncarbon, carbon-manganese 235SlabsSemi-Finished

Apartado 9033402 Avilés

Factoría de Avilés

Tel: +34 985 187299 Email: mailto:[email protected] page http://www.arcelormittal.comCertificate #: MD00/0460/0006/1 Expiry date: 31/08/2014

Asturias

A, B, D, E 80Normal StrengthPlatesARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑAARCELOR MITTAL ESPAÑA GijonDH40, EH40, FH27S, FH32, FH36, FH40 25Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

80


Apartado 57033200 Gijón

Factoriá de Gijón

Specified through thickness properties for plates up to 50mm thickness.Tel: +34 985 187299 Fax +34 985 187 519Email: mailto:[email protected] Web page http://www.arcelormittal.comCertificate No. MD00/1804/0008/1 Expiry date: 25/09/2014

As belowE.A.F. / Con CastSteelmakingARCELORMITTAL ZARAGOZA S.A.ARCELORMITTAL ZARAGOZA S.A.ARCELORMITTAL ZARAGOZA S.A.ARCELORMITTAL ZARAGOZA S.A. BarcelonaNormal Strength, Higher Strength 130BilletsSemi-FinishedA 15Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36 15Higher StrengthA 25Normal StrengthBarsAH27S, AH32, AH36, DH27S, DH32, DH36 25Higher Strength







Parque Tecnológico de Reciclado "Lopez Soriano"Ctra. Torrecilla de Valmadrid Km 1.95

Avda. José Lopez Soriano No.100

Tel No: +34 976 466171 Fax No +34 976 517648Email: [email protected] www.arcelormittal.comThe approved sections are in the form of Angles, "U" and Channel to a nominal width of 140 mm.The approved bars are in the form of Flats to a nominal width of 200 mmCertificate No: MD00/4183/0003/1 Expiry date 18/06/2016

B° La Cartuja Baja 50720 Zaragoza

As belowE.A.F. / Con CastSteelmakingCOMPAÑÍA ESPAÑOLA DE LAMINACIÓN, S.L.COMPAÑÍA ESPAÑOLA DE LAMINACIÓN, S.L.COMPAÑÍA ESPAÑOLA DE LAMINACIÓN, S.L.COMPAÑÍA ESPAÑOLA DE LAMINACIÓN, S.L. BarcelonaNormal Strength 180BilletsSemi-FinishedA 50Normal StrengthSectionsA 35Normal StrengthBars

Poligono Industrial 'San Vicente' s/n08755 Castellbisbal

C/ Ferralla, 12

Tel: +34 618 695 319 / +34 939 730 400 Fax: +34 93 817 6676 Email:mailto:[email protected] Web:http://www.celsa.comBillets as semi finished products nominal 180mm maximum width x nominal 12000mm maximum length to the above maximum thickness are approved forfurther processing for rolled products.Certificate Numberr: MD00/0343/0008/1 Expiry: 22/03/2016

Barcelona

As belowE.A.F. / Con CastSteelmakingGERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.(GERDAU)(GERDAU)(GERDAU)(GERDAU)

Bilbao

As below 300BloomsSemi-Finished

carbon, carbon-manganese, alloy 100MachineryBars

R3, R3S, R4, API-2F, R5 78Chain Cable Stock

U2, U3 100

Bo. Ugarte, S/NP.O. Box 76

Planta Basauri

Tel +34 944 871 726 Fax +34 944 871826 Email: mailto:[email protected]: www.gerdau.esThe approval for bars for chain cable stock grades; R3; R3S; R4; R4S; R5 are restricted to supply to Vicinay Cadenas SA to the applicable purchasingspecification; MPR3; MPR3S; MPR4; MPR4S ;MPR5.The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval wasgranted.Certificate Number: MD00/0051/0009/1 Expiry: 22/01/2015

48970 Basauri (Vizcaya)

As belowE.A.F. / IngotSteelmakingGERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.(GERDAU)(GERDAU)(GERDAU)(GERDAU)

Bilbao

A 220Normal StrengthBars


R3, R3S, R4, API-2F, R5 185Chain Cable Stock

Paseo Alejandro Calonje, 139200 Reinosa (Cantabria)

Planta Reinosa

Tel: +34 942 775 187 Fax: +34 942 775 283 Email: mailto:[email protected] Web http://www.sidenor.comThe approval for bars for chain cable stock grades; R3; R3S; R4; R4S; R5 are restricted to supply to Vicinay Cadenas SA to the applicable purchasingspecification; MPR3; MPR3S; MPR4; MPR4S; MPR5.The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval wasgranted.The scope of approval for bars in grade R4 includes bars to 130mm diameter produced with con cast steel manufactured at Gerdau Aceros Especials Europa SLPlanta Basauri.The scope of approval for bars in grade R5 includes bars to 175mm diameter produced with con cast steel manufactured at Gerdau Aceros Especials Europa SLPlanta Basauri.


carbon, carbon-manganese, alloy 200MachineryBarsGERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.(GERDAU)(GERDAU)(GERDAU)(GERDAU)

Bilbao

R4 117Chain Cable Stock

R3, R3S 123

R5 150

U1, U2, U3 152







Ctra. de Zumárraga, s/n20720 Azcoitia

Planta Azcoitia

Tel: +34 943 025206 Fax: +34 943 025299 Email: mailto:[email protected] Web:http//:www:gerdau.esThe approval for bars for chain cable stock grades; R3; R3S; R4 are restricted to supply to Vicinay Cadenas SA to the applicable purchasing specification; MPR3;MPR3S; MPR4.The approval for bars for chain cable stock grade R5 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification MPR5, this approval is withbars to 150mm rolled from steel made at Gerdau Aceros Especiales Europa S.L. Planta Basauri and for bars to 78 mm diameter which has been manufacturedfrom ingots supplied by Gerdau Aceros Especiales S.L. Planta Reinosa and rolled by Gerdau Aceros Especiales S.L. Planta Azcoitia.The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval wasgranted.Certificate Number: MD00/0620/0010/1 Expiry: 28/03/2014

Guipúzcoa

carbon, carbon-manganese, alloy 37StructuralBarsGERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.GERDAU ACEROS ESPECIALES EUROPA S.L.(GERDAU)(GERDAU)(GERDAU)(GERDAU)

Bilbao


C/Portal De Gamarra, No. 2201013 Vitoria (Alava)

Planta Vitoria

Tel: +34 94 516 4638 Fax: +34 94 516 4748 Email: mailto:[email protected] Web://www.gerdau.esCertificate Number: MD00/2076/0006/1 Expiry: 31/01/2015

A, B, D, E 25Normal StrengthFabricated SectionsHIERROS MARCELINO FRANCO S.A.HIERROS MARCELINO FRANCO S.A.HIERROS MARCELINO FRANCO S.A.HIERROS MARCELINO FRANCO S.A. GijonAH32, AH36, DH32, DH36, EH32, EH36 25Higher Strength

Avda. Conde Guadalhorce, 13133400 Avilés

Tel: +34 985 56 60 67 Fax: +34 985 566 653 email: [email protected] No. MD00/2778/0005/1 Expiry date: 29/01/2016

Approval requires that welding is undertaken by Industrias Metalicas de Cancienes S.L ‘INMECA’.

Asturias

A 25Normal StrengthSectionsLAMINADOS LOSAL, S.A.LAMINADOS LOSAL, S.A.LAMINADOS LOSAL, S.A.LAMINADOS LOSAL, S.A. BilbaoAH32, AH36, DH32, DH36, EH32, EH36, FH32,FH36

11Higher Strength

Bekoibarra, 9P.O. Box 17

Tel: +34 946251400 Fax: +34 946254976 Mob: +34 68 6942188 email: [email protected] / [email protected] web: www.losal.esCertificate No. MD00/0993/0007/1 Expiry date: 18/01/2017

48300 - Gernika

A 25Normal StrengthSectionsRUGUI S.L.RUGUI S.L.RUGUI S.L.RUGUI S.L. BilbaoAH32, AH36, DH32, DH36 40Higher Strength

Poligono Industrial Basarte20720 Azcoitia (Guipuzcoa)

Tel: +34 943 857311 Fax: +34 943 857312 Email: mailto:[email protected] Web http://www.rugui.comThe approved sections are in the form of flat bars up to a maximum width of 200mm. Certificate No. MD00/1915/0007/1 Expiry date: 05/02/2017

Apdo. de Correos no. 8 Azpeitia (Guipuzcoa)

SwedenSwedenSwedenSweden

austenitic stainless, duplex stainlessE.A.F. / Con CastSteelmakingAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGYAB SANDVIK MATERIALS TECHNOLOGY Stockholmaustenitic stainless, duplex stainlessE.A.F. / Ingotaustenitic stainless, duplex stainless 6Ingots (tonnes)Semi-Finishedaustenitic stainless, duplex stainless 265Bloomsaustenitic stainless, duplex Stainless 150Billetsaustenitic stainless, duplex stainless 195austenitic stainless, duplex stainless 185Barsaustenitic stainless, duplex stainless 185StructuralBarsaustenitic stainless, duplex stainless 185Machinery

SE-811 81 SandvikenTel: +46 (0) 26 263311 Fax: +46 (0) 26 263616 email: [email protected] web: www.smt.sandvik.comCertificate No. MD00/2173/0006/1 Expiry date: 30/10/2015

Semi Finished products austenitic and duplex stainless steel con-cast Blooms to 365mm wide, to 7500mm long; Con-cast Billets to 150mm wide, to 6200mmlong; As rolled billets to 195mm wide, to 6000mm long; semi-finished as rolled bars to 185mm diameter, 6900mm long for further processing for Rolled, ForgedProducts







As belowE.A.F. / Con CastSteelmakingOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS AB Stockholm304L, 304LN, 316L, 321, 347 12Austenitic Stainless SteelPlates from coilsUNS S31803, UNS 32205* 8Duplex Stainless304L, 316L, 321, 347, 304LN 12Austenitic StainlessCoilUNS S31803, UNS 32205* 8Duplex Stainless

Box 74SE-774 22 Avesta

Business Unit Special Coil Avesta Works

Tel: +46 (0)226 81832 Fax: +46 (0)226 813 16 E-mail mailto:[email protected] Web: http://www.outokumpu.com*accepted for approved applicationsCertificate No. MD00/0131/0008/1 Expiry date: 07/12/2014

304L, 316L, 317L, 321 5Austenitic StainlessCoilOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS AB Stockholm

SE-64480 TorshällaSpecial Coil Nyby

Tel +46 (0)1634 9000 Fax +46 (0)1634 9014 Email: mailto:claes.gefvenberg@outokumpuCertificate No. MD00/0132/0006/1 Expiry date: 29/01/2016

304L, 316L, 316LN, 321 50Austenitic StainlessPlatesOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS AB KristinehamnUNS S32304** 10Duplex StainlessUNS S31803(MOD)* 50

S-693 81 Degerfors,

Business Unit Special Plate,Quarto Plate Europe,

Tel: 46 586 47000 Fax: 46 586 47019 Email: mailto:[email protected] Web: http://www.outokumpu.com* accepted for approved applications** Grade UNS 32304 may be accepted as equivalent to 316L as shown in LR Rules when properties meet the Rule requirements.

Certificate Number MD00/1754/0006/1 Expiry date: 14/11/2014

UNS S31803, UNS S32205* 200Duplex StainlessBarsOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS ABOUTOKUMPU STAINLESS AB Kristinehamn

SE-693 81 DegerforsDegerfors Stainless

Tel: +46 (0)586 47000/47 232 Fax: +46 (0)586 47008Email mailto:[email protected] Web http://www.outokumpu.comEN 10088-1 grade 1.4462 accepted for approved applications only.Certificate number MD00/3144/0004/1 Expiry date: 08/06/2014

A, B, D, E 50Normal StrengthSectionsOVAKO BAR AB.OVAKO BAR AB.OVAKO BAR AB.OVAKO BAR AB. StockholmAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

A, B, D, E 45Normal StrengthBarsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

45Higher Strength

Box 559010 Boxholm

Boxholm Works

Tel: +46 0142 293600 Fax: +46 0142 293702 Email mailto: [email protected] Web http://www.ovako.com Certificate No. MD00/0560/0008/1 Expiry date: 27/09/2014

As belowE.A.F. / Con CastSteelmakingOVAKO BAR AB.OVAKO BAR AB.OVAKO BAR AB.OVAKO BAR AB. StockholmA, B, D, E 50Normal StrengthSectionsAH32, AH36, DH32, DH36, EH32, EH36 50Higher StrengthA, B, D, E 93Normal StrengthBarsAH32, AH36, DH32, DH36, EH32, EH36 93Higher Strengthcarbon, carbon-manganese 93Machinery

Smedjebacken WorksS-777 80 SmedjebackenTel. +46 142 293733 Fax +46 (0)240 668168 EMail mailto: [email protected] Web http://www.ovako.comCertificate #: MD00/0561/0006/1 Expiry date: 10/06/2016

As belowE.A.F. / IngotSteelmakingOVAKO HOFORS ABOVAKO HOFORS ABOVAKO HOFORS ABOVAKO HOFORS AB Stockholmcarbon, carbon-manganese, alloy 400BilletsSemi-Finishedcarbon, carbon-manganese, alloy 450Bars

Se-813 82 HOFORSTel: +46 (0) 298 25000 Fax: +46 0298 25025 Email: mailto:[email protected] Web: www.ovako.comCertificate No. MD00/1167/0009/1 Expiry date: 27/11/2014

As belowE.A.F. / IngotSteelmakingSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG ABSCANA STEEL BJÖRNEBORG AB Kristinehamncarbon, carbon-manganese, alloy, austeniticstainless


Kristinehamnsvägen 2S-68071 BjörneborgTel: +46 550 25143 Fax: +46 550 27420 Email: mailto:Email: mailto:jan.örjestå[email protected] Web: http:/www.scana.noIngots as semi-finished products to the above maximum weight; nominal; 2070/2230mm diameter x 2600mm; are approved for further processing for forgings.Certificate Number: MD00/2769/0002/1 Expiry: 04/08/2015







As belowB.O.S. / Con CastSteelmakingSSAB EMEA ABSSAB EMEA ABSSAB EMEA ABSSAB EMEA AB StockholmAs below 286SlabsSemi-FinishedA, B, D, E 75Normal StrengthPlatesFH27S 40Higher StrengthAH27S, AH32, AH36, AH40, AH42, DH27S,DH32, DH36, DH40, EH27S, EH36

60

DH42, EH32, EH40, EH42, FH32, FH36, FH40,FH42

70

AH46, AH50, AH55, AH62, AH69, DH46,DH50, DH55, DH62, DH69, EH46, EH50, EH55,EH62, EH69, FH46, FH50, FH55, FH62, FH69

80

460FG, 490FG, 510FG 60Boiler & Pressure Vessel360FG, 410FG 75LTAH27S, LTAH32, LTAH36, LTAH40,LTDH27S, LTDH32, LTDH36, LTDH40,LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,LTFH32, LTFH36, LTFH40


S-61380 OxelösundOXELÖSUND

Tel +46 155 254783 Fax +46 155 254082 Email: mailto:[email protected] Web:http://www.ssab.comAll plates with specified through thickness properties.Semi-finished products in carbon and carbon-manganese steel with fine grain (element combinations as stated), slabs to 1680 mm wide, to 11000mm long ofmaximum weight 30T for further processing to rolled productsMaterials Quality Scheme Approved - Approval No. MQS 049Certificate No. MD00/1282/0011/1 Expiry date: 24/04/2017

As belowB.O.S. / Con CastSteelmakingSSAB EMEA ABSSAB EMEA ABSSAB EMEA ABSSAB EMEA AB GothenburgNormal strength, Higher Strength 220SlabsSemi-Finished

97188 LuleåLULEÅ

Tel: +46 920 920 00 Email to: [email protected] We http://www.ssab.com

Slabs as semi finished products nominal 800-1700mm width x nominal 11000mm length to the above maximum thickness are approved for further processingfor rolled products.

Certificate No.: MD00/4194/0001/1 Expiry date: 02/07/2016

SwitzerlandSwitzerlandSwitzerlandSwitzerland

As belowE.A.F. / Con CastSteelmakingSTAHL GERLAFINGEN AGSTAHL GERLAFINGEN AGSTAHL GERLAFINGEN AGSTAHL GERLAFINGEN AG StuttgartA, B 15Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36 10Higher Strength

BahnhofstrasseCH-4563 GerlafingenTel: +41 (0)32 674 2568 Fax: +41 (0)32 674 2842 Email: [email protected] No. MD00/3438/0002/1 Expiry date: 01/03/2014

Taiwan, Republic of ChinaTaiwan, Republic of ChinaTaiwan, Republic of ChinaTaiwan, Republic of China

As belowB.O.S. / Con CastSteelmakingCHINA STEEL CORPORATIONCHINA STEEL CORPORATIONCHINA STEEL CORPORATIONCHINA STEEL CORPORATION KaohsiungNormal strength, Higher Strength 270SlabsSemi-FinishedA, B, D, E 50Normal StrengthPlatesAH47, DH47, EH47 65Higher StrengthAH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

75


No.1 Chung Kang RoadHsiao Kang

Tel: +886 7 802 1111 ext 2208 Fax: +886 7 805 1292Email: [email protected] page: www.csc.com.tw All grades are approved with specified with through thickness properties.Certificate No. MD00/0304/0009/1 Expiry date: 05/04/2017

Kaohsiung

As belowE.A.F. / Con CastSteelmakingDRAGON STEEL CORPORATIONDRAGON STEEL CORPORATIONDRAGON STEEL CORPORATIONDRAGON STEEL CORPORATION KaohsiungAH32, AH36, DH32, DH36 26Higher StrengthSections

Longjing Dist.,Taichung City

100, Longchang Road,

Tel: +886 4 2630 6088 Ext. 8705 Fax: +886 4 2630 6041 Email:[email protected] www.dragonsteel.com.twBillets / Blooms as semi-finished products to the above maximum thickness x nominal 750mm maximum width x nominal 12000mm maximum length areapproved for further processing for rolled products.Sections produced are H beam sections to the above maximum thickness x 900mm x 300mm overall dimensions x nominal 19000mm maximum length.Certificate Number: MD00/3768/0004/1 Expiry: 02/04/2016







A 15Normal StrengthSectionsT. S. STEEL COMPANY LTD.T. S. STEEL COMPANY LTD.T. S. STEEL COMPANY LTD.T. S. STEEL COMPANY LTD. KaohsiungAH32, AH36 12Higher StrengthA 25Normal StrengthBars

Tsuang-Hine Industrial ZoneHsen-Kang Road

No.6 Kon-Sixth Road

Tel: +886 4 798 0060 Fax: +886 4 799 1522email: [email protected]


Chang-Hua Hsien

As belowE.A.F. / Con CastSteelmakingTUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP. Taipeicarbon, carbon manganese, Normal Strength,Higher Strength

430Blooms/BilletsSemi-Finished

No.22, Pingding Erhu Village,Sihu Township,

Miao Li Works

Tel: +88 637 923333 ext197 Fax: +88 637 922994 Email mailto:[email protected] Web http://www.tunghosteel.comCertifcate Number: MD00/3719/0003/1 Expiry date: 15/12/2015

Miaoli County 36842,

A 18Normal StrengthSectionsTUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP.TUNG HO STEEL ENTERPRISE CORP. TaipeiAH27S, AH32, AH36 18Higher Strength

No. 8, Chia Hsing Street,Hsiao Kang,

Kaohsiung Works

Tel: +88 6 7802 3131 Fax: +88 6 801 0696 Email mailto:[email protected] Web http://www.tunghosteel.comCertificate Number: MD00/3720/0003/1 Expiry: 15/12/2015

Kaohsiung City

austenitic stainless, duplex stainlessE.A.F. / Con CastSteelmakingWALSIN LIHWA CORP.WALSIN LIHWA CORP.WALSIN LIHWA CORP.WALSIN LIHWA CORP. Kaohsiungaustenitic stainless, duplex stainless 200SlabsSemi-Finishedaustenitic stainless, duplex stainless 240Billets

Chin Shuei Li,Yenshui Dist,

Yenshui Plant3-10 Shi Jou Liau

Tel +886 6 6520911 ext. 407 Fax +886 6 6533076 Email mailto:[email protected] Web http://www.walsin.comCertificate No. MD00/3063/0004/1 Expiry date: 14/03/2016

Semi Finished Products Austentic & Duplex Stainless slabs to 1300mm wide, to 12000mm long; square billets to 155mm wide, 12000mm long; round billets withmaximum diameter 240mm , to 12000mm long

737 Tainan City,

ThailandThailandThailandThailand

A 50Normal StrengthPlatesLPN PLATE MILL PUBLIC COMPANY LIMITEDLPN PLATE MILL PUBLIC COMPANY LIMITEDLPN PLATE MILL PUBLIC COMPANY LIMITEDLPN PLATE MILL PUBLIC COMPANY LIMITED Bangkok360AR, 410AR 40Boiler & Pressure Vessel

Pakklong BangplakodPrasamutjedee

199/9 Moo 4 Suksawad Road

Tel: +66 2815 6400-9 Fax: +66 2815 6415 Email: mailto:[email protected]: www.lpnpm.co.thCertificate No. MD00/2578/0006/1 Expiry date: 02/09/2014

Samutprakarn 10290

A, B 40Normal StrengthPlatesSAHAVIRIYA PLATE MILL PUBLIC COMPANYSAHAVIRIYA PLATE MILL PUBLIC COMPANYSAHAVIRIYA PLATE MILL PUBLIC COMPANYSAHAVIRIYA PLATE MILL PUBLIC COMPANYLIMITEDLIMITEDLIMITEDLIMITED

Bangkok


160 Moo 14 Sukhumvit RoadBangpakong

Chachoengsao

Tel: +66 3883 2056 ext 162 Fax: +66 3853 2370 Email mailto: [email protected] No. MD00/3952/0001/1 Expiry date: 02/09/2014

Chachoengsao 24130

B, D 8Normal StrengthHot Rolled CoilSAHAVIRIYA STEEL INDUSTRIES PUBLICSAHAVIRIYA STEEL INDUSTRIES PUBLICSAHAVIRIYA STEEL INDUSTRIES PUBLICSAHAVIRIYA STEEL INDUSTRIES PUBLICCOMPANY LIMITEDCOMPANY LIMITEDCOMPANY LIMITEDCOMPANY LIMITED

Bangkok

A 19








9M.7 Tumbol MearumphuengAmphur Bang Saphan

Prachuab Kirikhan

Tel: (+66) 32 691403-5 ext 5118 Fax: (+66) 32 691408 Email mailto: [email protected] Web http://www.ssi-steel.comCertificate No. MD00/3764/0002/1 Expiry date: 23/09/2015

Prachuab Kirikhan 77140

The NetherlandsThe NetherlandsThe NetherlandsThe Netherlands

As belowE.A.F. / IngotSteelmakingNEDSTAAL B.V.NEDSTAAL B.V.NEDSTAAL B.V.NEDSTAAL B.V. RotterdamMarine


carbon, carbon-manganese, alloy 320Slabs

carbon, carbon-manganese, alloy 400Blooms

carbon, carbon-manganese, alloy 185Billets

Rapenburg 1P.O. Box 210

Tel: +33 (0) 78 692 3785 Fax: +31 (0) 78 692 3770 Email mailto:[email protected] Web: http://www.nedstaal.nlThe above semi finished products to the indicated maximum weigh / thickness are approved for further reprocessing for forgings; ingots nominal maximumdimensions 940mm x 780mm x 2300mm long; slabs nominal 620mm wide x nominal 3300mm long; billets nominal 185mm wide x 9200mm long; bloomsnominal 220mm wide x 13100mm long.Certificate Number: MD00/3010/00054/1 Expiry: 11/09/2015

2950 AE Alblasserdam

As belowB.O.S. / Con CastSteelmakingTATA STEEL IJMUIDEN B.VTATA STEEL IJMUIDEN B.VTATA STEEL IJMUIDEN B.VTATA STEEL IJMUIDEN B.V Amsterdamcarbon, carbon-manganese 225SlabsSemi-FinishedA, B 20Normal StrengthPlatesA, B 20Normal StrengthHot Rolled Coil

Postbus 100001970 CA IJmuiden

IJmuiden Works

Tel +31 2514 92110 Fax +31 2514 70414 Email: [email protected]: www.tatasteel.nlCertificate No. MD00/0698/0008/1 Expiry date: 29/09/2015

TunisiaTunisiaTunisiaTunisia

A 25Normal StrengthFabricated SectionsPALESCANDOLO CNT sarlPALESCANDOLO CNT sarlPALESCANDOLO CNT sarlPALESCANDOLO CNT sarl NaplesAH32, AH36 25Higher Strength

Parc D' Activite' Economique De Bizerte7000 BizerteTel: + 21 77 241 7292 Fax: +21 77 241 7552 Email: [email protected] Certificate Number: MD00/4018/0001/1 Expiry: 26/04/2015

TurkeyTurkeyTurkeyTurkey

As belowE.A.F./Ingot/Con CastSteelmakingASIL CELIK SANAYI VE TICARET A.S.ASIL CELIK SANAYI VE TICARET A.S.ASIL CELIK SANAYI VE TICARET A.S.ASIL CELIK SANAYI VE TICARET A.S. Istanbulcarbon, carbon-manganese, alloy 300StructuralBarscarbon, carbon-manganese, alloy 220Machinery

Gemic Koyu Mevki 16800Orhangazi, BursaTel: +90 224 280 61 00 Fax: +90 224 280 62 00 Email mailto:[email protected] http://www.asilcelik.com.trCertificate No. MD00/1921/0006/1 Expiry date: 04/05/2016

As belowB.O.S. / Con CastSteelmakingEREGLI DEMIR VE CELIK FABRIKALARI T.A.S.EREGLI DEMIR VE CELIK FABRIKALARI T.A.S.EREGLI DEMIR VE CELIK FABRIKALARI T.A.S.EREGLI DEMIR VE CELIK FABRIKALARI T.A.S. IstanbulA, B, D, E 60Normal StrengthPlatesAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36, FH27S, FH32, FH36

60Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 60Boiler & Pressure VesselA, B, D, E 15Normal StrengthHot Rolled CoilAH32, AH36, DH32, DH36, EH27S, EH32,EH36, FH27S, FH32, FH36

15Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 15Boiler & Pressure VesselKDZ. Eregli67330

Tel: +90 (0)372 329 3838 Fax: +90 (0)372 323 2598 Email: mailto:[email protected] Web http://www.erdemir.com.trCertificate No. MD00/1951/0009/1 Expiry date: 06/05/2014

Zonguldak







As belowE.A.F. / Con CastSteelmakingÖZKAN DEMIR ÇELIK SANAYI A.S.ÖZKAN DEMIR ÇELIK SANAYI A.S.ÖZKAN DEMIR ÇELIK SANAYI A.S.ÖZKAN DEMIR ÇELIK SANAYI A.S. Istanbulcarbon, carbon manganese 260Blooms/BilletsSemi-FinishedD, E 12Normal StrengthSectionsA, B 25AH40, DH40 19Higher StrengthAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

28

Bozköy Köyü13. Cadde N:4 35800

Tel +90 232 625 1515 Fax +90 232 625 1054Email: [email protected]: http://www.ozkansteel.comCertificate No. MD00/2984/0004/1 Expiry date: 02/04/2014

Aliaga-Izmir

UkraineUkraineUkraineUkraine

As BelowOH/Ingot/ Con CastSteelmakingCJSC DONETSKSTEEL IRON AND STEEL WORKSCJSC DONETSKSTEEL IRON AND STEEL WORKSCJSC DONETSKSTEEL IRON AND STEEL WORKSCJSC DONETSKSTEEL IRON AND STEEL WORKS Mykolaivcarbon, carbon-manganese 5Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 150Slabs

141 Tkachenko StDonetsk region

Tel: +38 (0622) 61-27-44 or 61-31-62 Fax: +38 (062) 388 04 21 Email: mailto:[email protected] No. MD00/3134/0003/1 Expiry date: 27/01/2014

83062 Donetsk

As BelowOH/Ingot/ Con CastSteelmakingPJSC "ALCHEVSK IRON & STEEL WORKS"PJSC "ALCHEVSK IRON & STEEL WORKS"PJSC "ALCHEVSK IRON & STEEL WORKS"PJSC "ALCHEVSK IRON & STEEL WORKS" MykolaivNormal strength, Higher Strength 300SlabsSemi-FinishedD, E 45Normal StrengthPlatesB 50A 72AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

360AR, 410AR 22Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 50360, 410 72A 8Normal StrengthSectionsA 100Normal StrengthBars

Lugansk Region94202

Shmidt st. 4, Alchevsk

Tel: +38 06442 7 33 20 Fax: +38 06442 97 33 76 EMail: mailto:[email protected] Web page http://www.amk.lg.uaCertificate No. MD00/0088/0008/1 Expiry date: 28/07/2014

As belowB.O.S. / Con CastSteelmakingPJSC "AZOVSTAL IRON & STEEL WORKS"PJSC "AZOVSTAL IRON & STEEL WORKS"PJSC "AZOVSTAL IRON & STEEL WORKS"PJSC "AZOVSTAL IRON & STEEL WORKS" MykolaivNormal strength, Higher Strength 270SlabsSemi-FinishedD, E 50Normal StrengthPlatesA, B 100AH27S, AH32, AH36, AH40, DH27S, DH32,DH36, DH40, EH27S, EH32, EH36, EH40

50Higher Strength

360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 50Boiler & Pressure Vessel1, Leporsky St.Mariupol 87500Tel: +380 629 467 108 Fax: +380 629 468 441 Telex: 115123 VOLNA UX Email mailto:sal@@azovstal.com.ua Web http://www.azovstal.metinvestholding.comIncluding plates with specified through thickness properties. Z35 may be applied to all grades and thicknessesCertificate No. MD00/0779/0008/1 Expiry date: 15/02/2015

D 16Normal StrengthPlatesPJSC "DONETSK IRON AND STEEL WORKS"PJSC "DONETSK IRON AND STEEL WORKS"PJSC "DONETSK IRON AND STEEL WORKS"PJSC "DONETSK IRON AND STEEL WORKS" MykolaivA, B 20DH27S, DH32 16Higher StrengthAH27S, AH32 20360AR, 410AR 20Boiler & Pressure Vessel

122 Tkachenko StDonetsk 83062Tel: +38 0622 61 26 35 Fax: +38 0623 3880 421 Email:mailto:[email protected] No. MD00/2239/0006/1 Expiry date: 10/07/2013

As belowE.A.F. / IngotSteelmakingPJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL"PJSC "ENERGOMASHSPETSSTAL" Mykolaivcarbon, carbon-manganese, alloy 250Ingots (tonnes)Semi-Finished

Donetsk Region84306 Kramatorsk

Tel: +38 (06264) 6-94-93 Fax: +38 (06264) 6-94-93Email: [email protected] No. MD00/3575/0001/1 Expiry date: 16/03/2015







As belowB.O.S. / Con CastSteelmakingPJSC "ILYICH IRON AND STEEL WORKS OFPJSC "ILYICH IRON AND STEEL WORKS OFPJSC "ILYICH IRON AND STEEL WORKS OFPJSC "ILYICH IRON AND STEEL WORKS OFMARIUPOL"MARIUPOL"MARIUPOL"MARIUPOL"

Mykolaiv


DH40, EH40 25Higher Strength


50


360FG, 410FG 50

1 Levchenko StreetMariupol 87504All grades and thicknesses with specified through thickness properties. Notation Z25 or Z35 may be added.Tel: +38 (0)0 629 56 43 98 email: [email protected] web: www.ilyichsteel.metinvestholding.comCertificate No. MD00/0775/0006/1 Expiry date: 02/07/2016

As belowE.A.F. / IngotSteelmakingPJSC ELEKTROMETALLURGICAL WORKSPJSC ELEKTROMETALLURGICAL WORKSPJSC ELEKTROMETALLURGICAL WORKSPJSC ELEKTROMETALLURGICAL WORKSDNIPROSPETSSTALDNIPROSPETSSTALDNIPROSPETSSTALDNIPROSPETSSTAL

Mykolaiv

304L, 316L, 321 270Austenitic StainlessBars



81 Yuzhnoye ShosseZaporozhye, 69008

named after A.N. Kuzmin

Tel: +38 612 223 627 Fax No: +38 612 131 780Email : [email protected] http://www.dss.com.uaIncluding forged bars and tube blanks ( billets) in all qualities.Certificate No. MD00/2225/0007/1 Expiry date: 03/07/2016

United KingdomUnited KingdomUnited KingdomUnited Kingdom

A 50Normal StrengthSectionsACENTA HOT ROLLEDACENTA HOT ROLLEDACENTA HOT ROLLEDACENTA HOT ROLLED EnergyCoventry, UK


32Higher Strength

A 50Normal StrengthBars


50Higher Strength

Peartree LaneWoodside, Dudley

Tel: +44 (0) 1384 471 200 Email: mailto:[email protected] Web: http://www.acentasteel.comCertificate Number: MD00/2618/0007/1 Expiry: 20/02/2016

West Midlands DY2 0QS

A, B, D, E 12Normal StrengthSectionsCAPARO MERCHANT BAR PLC.CAPARO MERCHANT BAR PLC.CAPARO MERCHANT BAR PLC.CAPARO MERCHANT BAR PLC. LiverpoolAH32, AH36, DH32, DH36 12Higher StrengthA, B, D, E 50Normal StrengthBarsAH32, AH36, DH32, DH36 50Higher Strength

P.O. Box 15Scunthorpe

Caparo House

Tel +44 (0)1724 403022 Fax +44 (0)1724 403044Email: mailto:[email protected] Web: www.cmbplc.co.uk

The approved sections include flat bar and angled bar


DN16 1XL

AH32, AH36, DH32 18Higher StrengthFabricated SectionsCELLBEAM LTD.CELLBEAM LTD.CELLBEAM LTD.CELLBEAM LTD. LiverpoolDH36 30EH46-TM 20High Strength

Thorp Arch Trading Estate Wetherby

Tel: +44 (0)1737 840600 Email: [email protected] Web: www.cellbeam.co.ukCertificate No. MD00/3534/0004/1 Expiry date: 11/11/2014

West Yorkshire LS23 7DB







As belowE.A.F. / Con CastSteelmakingCELSA MANUFACTURING (UK) LTD.CELSA MANUFACTURING (UK) LTD.CELSA MANUFACTURING (UK) LTD.CELSA MANUFACTURING (UK) LTD. SouthamptonNormal Strength 140Blooms/BilletsSemi-FinishedA 25Normal StrengthSections

Seawall Road,Tremorfa,

Sections MillTremorfa Works

Tel: +44 (0) 1568 615201 Fax: +44 (0) 1568 612626Certificate No. MD00/3552/0003/1 Expiry date: 16/12/2014

Concast blooms/billets covers billets to 140mm x140mm and concast 'mini slabs' to 280 x 120mm.

Cardiff. CF24 5TH

stainless steelE.A.F/A.O.D/L.A.F/ConCastSteelmakingOUTOKUMPU STAINLESS LTD.OUTOKUMPU STAINLESS LTD.OUTOKUMPU STAINLESS LTD.OUTOKUMPU STAINLESS LTD. Liverpoolstainless steel 19Ingots (tonnes)Semi-Finishedstainless steel 300Slabsstainless steel 300Bloomsstainless steel 200Billets

P.O. Box 161Europa Link

LONG PRODUCTS, SMACC

The approval for steelmaking and ingots, slabs, blooms and billets in stainless steel covers the supply of austenitic, duplex, ferritic, martensitic and precipitationhardening grades, in accordance with the Society's Rules for the Manufacture, Testing and Certification of Materials, Chapter 3 or appropriate international ornational standards. The final processing mill is responsible for ordering steel which complies with their surface and internal quality standards and approvedchemical composition to enables them to achieve the required physical and mechanical properties.

Mass of slab and bloom up to 30.0T.and billet up to 20T

Tel: +44 (0)114 2616292 Fax: +44 0114 2616163 Email: mailto:[email protected] Web: http://www.outokumpu.comCertificate No. MD00/1883/0008/1 Expiry date: 01/01/2017

Sheffield, S9 1TZ

As belowB.O.S. / Con CastSteelmakingSAHAVIRIYA STEEL INDUSTRIES UKSAHAVIRIYA STEEL INDUSTRIES UKSAHAVIRIYA STEEL INDUSTRIES UKSAHAVIRIYA STEEL INDUSTRIES UK Liverpoolcarbon, carbon-manganese 305SlabsSemi-Finished

Steel HouseRedcar

Tel: +44 01642 408053 Email: [email protected] Web: http://www.ssi-steel.co.uk Certificate No. MD00/4057/0001/1 Expiry date: 22/07/2015

TS10 5QW


E.A.F. / IngotSteelmakingSHEFFIELD FORGEMASTERS INTERNATIONALSHEFFIELD FORGEMASTERS INTERNATIONALSHEFFIELD FORGEMASTERS INTERNATIONALSHEFFIELD FORGEMASTERS INTERNATIONALLTD.LTD.LTD.LTD.

EnergyCoventry, UK

Brightside LaneSheffield S9 2RW

P.O. Box 286

Tel: +44 (0)114 2449071 Fax: +44 (0)114 2422103 Email:mailto:[email protected] Web:http://www.sheffieldforgemasters.comCertificate No. MD00/0524/0007/1 Expiry date: 01/07/2014

E 50Normal StrengthPlatesTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTD GlasgowA, B, D 100FH40 25Higher StrengthFH32, FH36 30AH42, AH46 36AH40, DH40, DH42, DH46, EH40, EH42, EH46 65AH32, AH36, DH32, DH36, EH32, EH36 75460FG, 490FG, 510FG 75Boiler & Pressure Vessel360FG, 410FG 100LTFH40 25Ferritic Low TemperatureLTAH32, LTAH36, LTAH40, LTDH32, LTDH36,LTDH40, LTEH32, LTEH36, LTEH40, LTFH32,LTFH36

30

Motherwell ML1 1PUDalzell

Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.comAll plates with specified through thickness properties.Materials Quality Scheme Approved - Approval No. MQS030Certificate No. MD00/0235/0009/1 Expiry date: 19/05/2014

As belowB.O.S./Ingot/Con CastSteelmakingTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTD Liverpoolcarbon, carbon-manganese 305SlabsSemi-Finishedcarbon, carbon-manganese 355Blooms/BilletsE 50Normal StrengthPlatesB, D 60A 80FH40, FH42, FH46 25Higher StrengthAH40, AH42, AH46, DH40, DH42, DH46, EH40, 30







United KingdomUnited KingdomUnited KingdomUnited KingdomEH42, EH46 30Higher StrengthPlatesFH32, FH36 50AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

70

360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG, 460FG, 490FG, 510FG 70360, 410 80LTAH27S, LTAH32, LTAH36, LTAH40,LTDH27S, LTDH32, LTDH36, LTDH40,LTEH27S, LTEH32, LTEH36, LTEH40


A, B, D, E 50Normal StrengthSectionsAH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

50Higher Strength

P.O. Box 1Scunthorpe DN16 1BP

Scunthorpe

Tel: +44 1724 404040 Email:maito: [email protected] Web:http://www.tatasteel.comAll plates with through thickness properties.Materials Quality Scheme Approved - Approval No. MQS029Certificate #: MD00/0240/0013/1 Expiry date: 23/07/2014

A, B, D, E 77Normal StrengthSectionsTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTD EnergyCoventry, UK


RedcarTeesside

Teesside

Tel: +44 (0)1642 406583 Fax: +44 (0)1642 406904 Email: mailto:[email protected]

Materials Quality Scheme Approved - Approval No. MQS031Certificate #: MD00/0242/0013/1 Expiry date: 02/06/2014

TS10 5RD

A, B, D, E 20Normal StrengthSectionsTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTDTATA STEEL (UK) LTD EnergyCoventry, UK

AH40, DH40 15Higher Strength

AH32, AH36, DH32, DH36, EH32, EH36 20

P.O. Box 1Saltburn by the Sea

Skinningrove

Tel: +44 (0)1287 640212 Fax: +44 (0)1287 643467 Email: mailto:[email protected]

Materials Quality Scheme Approved - Approval No. MQS032Certificate #: MD00/0243/0010/1 Expiry date: 18/08/2014

TS13 4ET

carbon, carbon-manganese 16Structural SectionsFabricated SectionsTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITED EnergyCoventry, UK

CorbyNorthamptonshire

Hartlepool WorksP.O. Box 101, Weldon Road

Tel: +44 (0)1536 404704 Fax: +44 (0)1536 404212 Email: mailto:[email protected] Web: http://www.tatasteel.comIncludes fabricated hollow sectionsCertificate No. MD00/0234/0001/1 Expiry date: 26/02/2015

NN17 5UA

A 20Normal StrengthSectionsTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITED EnergyCoventry, UK


20Higher Strength

carbon, carbon-manganese 20Structural SectionsFabricated Sections

Brenda RoadHartlepool

Hartlepool Works20 Inch H.F.I. Pipe Mill

Tel: +44 (0)1429 527249 Mob: +44 (0)7743 842969 Email: mailto:[email protected] Web:http://www.tatasteeleurope.comCertificate #: MD00/0236/0007/1 Expiry date: 10/09/2014

Teeside TS25 2EG







carbon, carbon-manganese, alloyE.A.F./Ingot/Con CastSteelmakingTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITED EnergyCoventry, UK

as below 13Ingots (tonnes)Semi-Finished

carbon, carbon-manganese, alloy 381Semi-finished ProductsBars


U1, U2, U3, R3, R3S, R4 165Chain Cable Stock

StocksbridgeSheffield

Rotherham & Stocksbridge Sites

Tel: +44 (0)114 2832043 Fax: Email mailto:[email protected] Web page http://www.tatasteeleurope.comCertificate No. MD00/1593/0006/1 Expiry date: 04/07/2014

South Yorkshire S36 2JA

As belowB.O.S. / Con CastSteelmakingTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITED EnergyCoventry, UK


Port TalbotSA13 2NG

Port Talbot Works

Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.comApproval covers concast slabs to nominal size 1850mm wide x 10,000mm long to the maximum thickness for further processing to rolled products.

Certificate No.: MD00/3909/0001/1 Expiry Date: 05.05.2014

carbon, carbon-manganese 16Structural SectionsFabricated SectionsTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITEDTATA STEEL UK LIMITED EnergyCoventry, UK

CorbyNorthamptonshire

Corby WorksP.O.Box 101, Weldon Road

Tel: +44 (0)1536 404704 Fax: +44 (0)1536 404212 Email: mailto:[email protected] Web: http://www.tatasteel.comIncludes fabricated hollow sectionsCertificate No. MD00/0234/0001/1 Expiry date: 26/02/2015

NN17 5UA

United States of AmericaUnited States of AmericaUnited States of AmericaUnited States of America

As belowB.O.S. / Con CastSteelmakingARCELORMITTAL BURNS HARBORARCELORMITTAL BURNS HARBORARCELORMITTAL BURNS HARBORARCELORMITTAL BURNS HARBOR ChicagoD 35Normal StrengthPlatesA, B 50AH27S, AH32, AH36, DH27S, DH32, DH36,EH27S, EH32, EH36

75Higher Strength

Burns HarborIN 46304-9745

250 West Highway 12

Tel: +1 219 787 4515 Fax: +1 219 787 3435 Email mailto:[email protected] Web: http://www.arcelormittal.com Certificate Number:MD00/2331/0006/1 Expiry: 18/12/2015

carbon, carbon-manganese, alloyE.A.F. / IngotSteelmakingELLWOOD QUALITY STEEL COMPANYELLWOOD QUALITY STEEL COMPANYELLWOOD QUALITY STEEL COMPANYELLWOOD QUALITY STEEL COMPANY Chicagocarbon, carbon-manganese, alloy 38Ingots (tonnes)Semi-Finished

700 Moravia StreetNew Castle

Tel: +1 724 658 6849 Fax: +1 724 658 6802Email mailto:[email protected]: www.egi.orgCertificate No. MD00/2652/0005/1 Expiry date: 15/02/2015

Pennsylvania 16101

As below 248E.A.F. / Con CastSteelmakingEVRAZ CLAYMONT STEEL,EVRAZ CLAYMONT STEEL,EVRAZ CLAYMONT STEEL,EVRAZ CLAYMONT STEEL, PhiladelphiaA, B 75Normal StrengthPlates

Claymont,Delaware,

4001 Philadelphia Pike,

Tel No. +01 302 792 5400 Fax No. +01 302 792 0203Email: scott. [email protected]: www.EvrazIncNA.comCertificate No. MD00/3833/0001/1 Expiry date: 22/09/2013

19703







A, B, D 50Normal StrengthPlatesEVRAZ OREGON STEEL MILLSEVRAZ OREGON STEEL MILLSEVRAZ OREGON STEEL MILLSEVRAZ OREGON STEEL MILLS Los AngelesAH27S, AH32, AH36, DH27S, DH32, DH36 12Higher Strength360AR, 410AR 40Boiler & Pressure Vessel360FG, 410FG 50

14400 N. Rivergate Blvd.Portland

Tel: +1 503 978 6130 Fax: +1 503 978 4975Email: mailto:[email protected] Web http://www.evrazincna.comIncluding all plate grades and thicknesses with specified through thickness properties (Z35)

MATERIALS QUALITY SCHEME APPROVED - MQS 047Certificate No. MD00/1152/0006/1 Expiry date: 01/06/2015

OR 97203

E 51Normal StrengthPlatesJSW STEEL (USA) INC.JSW STEEL (USA) INC.JSW STEEL (USA) INC.JSW STEEL (USA) INC. HoustonA, B, D 102AH27S, AH32, AH36, DH27S, DH32, DH36,DH40

102Higher Strength

360FG, 410FG, 460FG, 490FG, 510FG 102Boiler & Pressure Vessel5200 East McKinney RoadBaytown

Tel: +1 281 383 5100 Fax: +1 281 383 1803 Email mailto: [email protected] Web: http://www.jswsteel.comCertificate No. MD00/3505/0002/1 Expiry date: 26/08/2014

Texas 77523

As belowE.A.F. / Con CastSteelmakingNUCOR STEEL MEMPHIS, INCNUCOR STEEL MEMPHIS, INCNUCOR STEEL MEMPHIS, INCNUCOR STEEL MEMPHIS, INC ChicagoCarbon, Carbon-manganese, Alloy 203Rolled Round BarsSemi-FinishedCarbon, Carbon-manganese, Alloy 511As Cast Round SectionCarbon, Carbon-manganese, Alloy 254Rolled Square Bars

MemphisTN 38109

3601 Paul R. Lowry Road

Tel: +1 901 786 5416 Fax: +1 901 788 5300 Email to: [email protected] Web http://www.nucor.com


As belowE.A.F. / Con CastSteelmakingNUCOR STEEL TUSCALOOSA INC.NUCOR STEEL TUSCALOOSA INC.NUCOR STEEL TUSCALOOSA INC.NUCOR STEEL TUSCALOOSA INC. New OrleansA 20Normal StrengthHot Rolled Coil360FG, 410FG 20Boiler & Pressure VesselA 20Normal StrengthPlates from coilsAH27S, DH27S, AH32, DH32, AH36, DH36 13Higher Strength

TuscaloosaAL 35404-1000

1700 Holt Road N.E.

Tel: +1 205 562 1200 Fax: +1 205 556 1482 Email to: [email protected] Web http://www.nucor.com

Materials Quality Scheme approved - MQS048


As belowE.A.F./Ingot/Con CastSteelmakingREPUBLIC STEELREPUBLIC STEELREPUBLIC STEELREPUBLIC STEEL Chicagocarbon, carbon-manganese, alloy 14Ingots (tonnes)Semi-Finishedcarbon, carbon-manganese 330Bloomscarbon, carbon-manganese 178Billets

2633 Eighth Street N.E.Canton

HOT ROLLED BAR DIVISIONCANTON WORKS

Tel: +1 330 438 5543 Fax: +1 330 438 5552 Email to: [email protected] Web: http://www.republicsteel.comIngots as semi finished products, nominal 740mm diameter x 4800mm, are approved for further processing for forgings to the maximum un-cropped weightshown above.Certificate #: MD00/2236/0006/1 Expiry date: 14/05/2016

Ohio 44704-2311

As belowE.A.F. / Con CastSteelmakingSSAB ALABAMA, INC.SSAB ALABAMA, INC.SSAB ALABAMA, INC.SSAB ALABAMA, INC. New OrleansD 35Normal StrengthPlatesA, B 50AH27S, AH32, AH36, DH32, DH36 38Higher Strength360FG, 410FG, 460FG, 490FG, 510FG 38Boiler & Pressure Vessel

AxisAlabama 36050

12400 Highway 43 North

Tel: + 01 256-546-2669 Fax: +01 256-546-2670 email mailto:[email protected] Web http://www.ipsco.com

Materials Quality Scheme Approved - MQS 042Certificate No. MD00/3108/0006/1 Expiry date: 30/03/2014







carbon, carbon-manganese, alloyE.A.F. / Con CastSteelmakingSTEEL DYNAMICS INCSTEEL DYNAMICS INCSTEEL DYNAMICS INCSTEEL DYNAMICS INC ChicagoCarbon, Carbon manganese, Alloy 178Rolled BarsSemi-Finished

8000 North County Road 225 East,Pittsboro,

ENGINEERED BAR PRODUCTS DIVISION

Tel: +1 877 683 2277 Fax: +1 317 892 7005Certificate No: MD00/4134/0001/1 Expiry Date: 24/03/2016

Concast blooms approved to 262 x 358 mm section.

IN, 46167

As belowE.A.F. / IngotSteelmakingTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESS Chicagocarbon, carbon-manganese, alloy 330BarsSemi-Finished

CantonOH 44706-0932

(Faircrest Steel Plant)1835 Dueber Avenue S.W.

Tel: +1 330 471 3263 Fax: +1 330 471 4077 Email: mailto:[email protected] Werb: http://www.timken.com


As belowE.A.F. / Con CastSteelmakingTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESSTHE TIMKEN COMPANY STEEL BUSINESS Chicagocarbon, carbon-manganese, alloy 330BarsSemi-Finished

1835 Dueber Avenue S.W.Canton

(Harrison Steel Plant)

Tel: +1 330 471 3263 Fax: +1 330 471 4077 Email: mailto:[email protected] Werb: http://www.timken.com


OH 44706-0932




Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as ‘Lloyd's Register’. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. © Lloyd’s Register Group Limited 2014. All rights reserved.

q list 1list 1list 1list 1 approved steelmakers and

Documents