python denso dst pc software user manual
TRANSCRIPT
NOTE
1. To use the DST-PC, be sure to log-in to Windows with administrator user account.2. Before install software, pls do closed the other software and anti-virus software, in case the software
can't run correctly
First. run Python1bsetup.ext, install it
note:
cos your windows system is different, maybe not warning icon is different, don't care it, justclick" Run" button
when it comes photo as follows, pls click" next" button
pls choose install desination folder, then click " next " button
when as follows, pls do click" next" , then is begin to install
as follows photos. Pls click” confirm” button
Note: When you first install python1B, communication interface will
display the drive by chapter after the completion of the above information,
from the second start, it no longer displays the above information
directly into (8)
(8) Usb drive automatically starts the installation, the installation
process will display the following screen, this time, do not perform any
operation untill computer display (9)
(9) when show as follows, click" Auto Detect" Button
(10) when The following screen is displayed, pls connect the data communication cable withPYTHOn and vehicles, and let the car engine started to make python with power. set the python'susb jack to connect to the pc usb port
(11) pls connect PYTHON to pc, OS Will automatically recognize
Note: According pc performance, this process can sometimes take several
minutes. Please wait while the screen back (12) of the screen, in addition,
the second starts to connect to the same usb port, sometimes not performed
by chapter directly into (13)
(12) When is as follows, pls click “ confirm”
(13) Start automatically retrieve PYTHON connected usb port Do not carry
out any operation, please wait a moment
Note: auto detect need some seconds, pls be patient to wait(14) Complete the communication interface settings, will display the
following screen, click on the “ confirm” button
(15) hen changing the communication interface to connect the usb port, it
is necessary from the desktop shortcut "python1Bconfig" set operation
details, refer to(Supplement: usb re-set)
Note: if usb communication interface set is failure, it will show as
follows, pls click" confirm", re-start " Auto detect“
if communication interface set sucess, will show " comunication port" "
Python interface" " Baud rate" show data, pls comfirm the data, then click
" ok" button
Note: different pc, show data in " communication port" " Python interface" " Baud rate"sometimes is different too
when shows as follows, it proves finish the installing of communication drive. then click" finish"
Intall DST-PC
NOTE
1. To install the DST-PC, be sure to log-in to Windows with administrator user account.3. Before install software, pls do closed the other software and anti-virus software, in case the software
can't run correctly
(1) By a user with administrator privileges to log in, and perform
Setup_DST-PC_DNSD_Ver ***. Ext
4.
5.note:
cos your windows system is different, maybe not warning icon is different, don't care it, justclick" Run" button
pls install is as follows.
When it shows as follows, pls click “ next”
Confirm it, then click “ install “ button
Begin to install, pls just wait
If all is okay, it will show as follows, pls click “ finish” , then over the install
Note: when you finish the install , maybe it will re-start the pc,
Delete method of procedure
DST-pc after installation For uninstalling, you can delete the DST-pc
computer, proceed as follows:
1 Click the windows start button, select Control Panel, or choose Control
Panel settings
2 In the Control Panel interface options and start the Add and Remove
Programs
3 In the list of programs and select "DST-PC DNSD", click on the "Add and
Delete" or "Delete"
After 4, in accordance with the instructions on the screen and uninstall
reset usb port
When installing a desktop shortcut or folder from the production
(C:/Python1B2534J) start Python1BConfig.exe
If it comes as follows, pls click “ auto detect “ button
The following steps (1, installation of communication interface driver)
is the same 12-15
Any questions, pls send mail to [email protected], thanks