pyrolysis
DESCRIPTION
pyrolysisTRANSCRIPT
Pyrolysis Plant
PYROLYSIS PLANT CONVERTS USED WASTE RUBBER TYRES &
ALSO WASTE PLASTIC INTO PYROLYSIS OIL (FURNACE OIL),
CARBON BLACK & HYDROCARBON GAS
Meaning of Pyrolysis
• Pyrolysis(from Greek word. pyr - fire, heat and lysis - decomposition, decay) The process of Pyrolysis has duration of 4 to 12 hours, depending on the quantity and size of tyres (car tyres, truck tyres, etc.). During the process different vacuum values are applied in pre-determined temperatures and in different phases. Different gases are obtained and the condensed gas is stored in tanks as a Fuel-Oil (Furnace Oil).
Advantages of pyrolysis plants
• Purest quality of pyrolysis oil( Furnace oil) as good as finished product
• The only commercial ‘waste’ tyre process that in reality removes both worn/waste rubber tyres ‘waste’ chain, in this process achievement will have significant environmental and profitability impact
• Both rubber tyres & plastic can be used as raw material but not simultaneously
• Batch & Continuous type of pyrolysis process Breakthrough technologies used to improve safety, profitability & ease of operation
• More than 90% of machinery parts are non-moving: this reduces the recurring maintenance.
Pyrolysis Reactor
Features of the plant:1. 100% wastage tyre recycling is achieved (No churn left after the2. process)3. No chemical ingredients are used in process (environment friendly)4. During and after the process; no soil, water or air pollution is observed. Creates economically
valuable products out of wastage tyres (These are an industrial product that have a good market value and demand)
5. The most cost-effective wastage tyre recycling technology in the world.6. Raw material (wastage tyre) is cheap and easy to provide. These are the by-products of tyre
production.7. Each recycled ton of tyres preserves 10 tons of CO2 that is a major green house gas.8. It is a 100 % pollution free process, thus making eco-friendly environment.9. The process can be applied to all rubber based materials.10.The system creates an alternate source of energy to replace petroleum products and natural gas.11.System gives the opportunity to governments and local administrations to deal with the wastage
tyre problem to a great extent.12.The process of Pyrolysis has duration of 4 to 12 hours, depending on the quantity and size of tyre
(car tyre, truck tyre, etc.). 13.During the process different vacuum values are applied in pre-determined temperatures and in
different phases. Different gases are obtained and the condensed gas is stored as a fuel-oil in tanks.
Technical Details• This is a batch process system.• The wastage tyres are feed into the reactor vessel
and heated under controlled conditions of temperature and pressure.
• The process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases.
Technical Details
• These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form.
• During the process, carbon black and steel are also generated.
• The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process.
• These systems can be operated 12 Hours/300 Days.
The Products obtained fall into the following bands
1) FUEL OIL (Furnace Oil) (approx 35-40%) • Furnace Oil is produced by this conversion
plant is widely used for industrial and commercial purposes as fuel such as hot mixed plant for road construction & Fuel for Furnace in Iron smelting plants. The oil is approx 35% of the amount of feed stock.
2) CARBON BLACK (approx 35-40%)Carbon Black is also a product conversion by pyrolysis technology. The amount of recycled carbon black is approx 35% (depending on the type of tyre) of the feed stock. Presently in India Royal Carbon Black Pvt Ltd (Hanil Era Textile Group) has set up plant of huge capacity. Carbon black can be used as raw material to make bricks mixing it with Coal Ash and other value additions are easily possible could be considered at later stage.
3) STEEL WIRE (approx 10-12%)Tyres also contain steel wires up to 10%, which can be extracted after the process or it can removed before the process thru a Bead Wire removing Machine, and later the tyres could be cut in multi pieces for feed stock, benefit of this would be more realization of steel & maximum use of plant capacity
4) GAS (approx 15-20 %)Non-Condensable gases arise during the recycling application which; Has a higher calorific value compared to natural gas, can replace natural gas and propane when stored can be used as energy resource in gas burners, also used in pyrolysis system. The volume of gas generated thru this system is 15 to 20% of the total amount of recycled tyres and considering if we process 10 ton scrap tyre/day, the facility generates 1400 – 1500 m³/day gas which has an enormous energy potential when evaluated.
Cut System machineUsed tires Tire Feeding Distillery
Purifying Carbon Black
Pyrolisis
INDUSTRIAL PROCESS FLOW CHART
Diesel GasolineFine Carbon Black
Rodrigo Triana
Steel Scrap Fuel Oil
Conveyor belt
storage of used tires
Carbon blackCoarse Pyrolityc
carbon black
storage of intermediate
processing product
Distillation
Fine CarbonCommercial Carbon
DIESEL 65%
GASOLINE 15%
FUEL OIL 12%
STEEL SCRAP 15 %
Gas 7.5%
Pyrolisis
Carbon Purification System
GAS 10%
CRUDE OIL 35%
Carbon Black 40%
TOTAL CONTROL PANEL PLANT
Cutting & Slicing System
Pyrolysis tyre machine ConfigurationLN-2800 * 6600 10-12 MT Capacity
• 1. Pyrolysis reactor, 2.8 diameter*6.6m length, 16mm thickness• 2. The cover 2mm• 3. Sub-air package (good oil and heavy oil separator), 900mm
diameter*1500mm, 6mm thickness• 4. Oil gas cooling system• : The cooling system is a big pool with 14 coiled pipes and four dampers
tanks inside or Condenser & cooling tower)• (108 type pipe. It is better to cool the oil gas than others)• 5. Light oil tank, 1400mm diameter*3500mm length, 4mm thickness• 6. Heavy oil tank, 700mm diameter*1500mm length, 4mm thickness• 7. Water sealing tank (safety system), 900mm diameter*1500mm length,
4mm thickness• 8. Gas combustion system (including the air blower, gas guns), etc
• 9. De-dusting system: sulfur removal system (3) with sprinkler head desulphurization, 1000mm diameter*3000mm length, 6mm thickness
• 10. Draft fan, 7.5kw• 11. the speed reducer, 5.5kw• 12. The electric control cabinet• 13. The heating chamber and burners• 14. The Magnetic rings• 15. Waste gas collecting system• 16. Chimney, 5 meters lengths• 17. Water pump, 1.5kw
Pyrolysis tyre machine ConfigurationLN-2800 * 6600
Pyrolysis tyre machine ConfigurationLN-2800 * 6600
• 18. oil pump, 1.5kw• 19 spiral carbon black discharge machine length
of 5 meters (for additional it is 160 USD/meter)• 20 vacuum pump• 21 hot air stove • 22 carbon black cover door
Waste tires cutting machineThe processing: first cut the waste tires into circle with cutting circle machine, then cut into bars with bar
cutter, finally cut it into cubes with cube cutter.
1. Cutting Circle Machine2. strip cutting machine
3. Cubic pieces cutting machine
Steel Wire Separator before pyrolysis
Capital investment in USD (all prices are FOB Lianyungang port, China)
• Price of the plant
• To be paid in India
• Auto Feeder
• Pressure Ball Valve
• Steel wire puller machine after the pyrolysis process
• 45,000
• 4000
• 1000
• 600
• 1500
Capital investment in USD (all prices are FOB Lianyungang port, China)
• Steel Wire Separator before pyrolysis
• Cutting tyre into circle machine a
• Cutting tyre into strip machine • Cutting tyre into pieces machine • Grand Total
• 6100• • 2000• • 3500• • 3500• 67200
Terms & Condition
• Delivery Time : 30 days from your order confirmation
• Installation Period : 30 days• Warranty Period : 1 Year• After Sales Service : 1st Year Free Service after
then AMC Based.• Installation, Training : Engineer will visit India and
install ( to be paid by the buyers 2 way air tickets, Lodging and boarding and salary of 50 USD per day for 30 days)
• Other Arrangements to be made by Buyer: Storage tank of oil (Available locally), Civil Work etc