pwb - 100 plasma/flat panel - cable organizer · pdf filepwb-100 plasma/flat panel display...
TRANSCRIPT
PWB-100Plasma/Flat Panel Display Wall Box Metal Products Group
PWB-100
The PWB-100 is the essential installation accessory for anyflat panel display. It installs easily in the wall behind any dis-play allowing your screen to sit flush against the wall. Thisunit provides a neat and secure environment for the audio,video, control and power connections.
The PWB-100 is 11”W x 5.25”H x 3.57”D and installs easi-ly between any two standard studs in the wall. Once pop-ulated the overall height is 7.39” behind the wall.Connections and cable entry can be on the top or the bot-tom depending on installation preference. Designed tomount along the bottom edge behind a Plasma or LCD dis-play, the PWB-100 provides a single point for all your con-nections. The unit accommodates up to six single spaceIntelligent Plate Solution plates and a UL listed single ganggem box for AC power.
The PWB is available in white or black and is suitable forpainting or other finishing, matching any décor. It has acable exit slot for the display connections and the excesscable can easily be hidden inside of the box making theentire installation as clean as possible. The cover screwsonto the front of the box once all connections are in place.
FSR designed this unit for new and existing construction.Brackets are included for mounting to studs in new con-struction as well as surface mount clips for mounting tosheet rock or plywood in existing construction.
1 - Low voltage back box 1 - UL listed Gem box3 - Block off plates 2 - Custom madison clips2 - Surface mount clips 2 - Stud mount brackets1- Pass through grommet,
additional grommets availableuse part #13342
DESCRIPTIONDESCRIPTION
INCLUDED ACCESSORIESINCLUDED ACCESSORIES
FSR Inc.244 Bergen Boulevard, Woodland Park, NJ 07424 Phone: 973.785.4347 · Fax: 973.785.4207Web: www.fsrinc.com · E-mail: [email protected] Desk: 1-800-332-FSR1 LIT1163A
FEATURESFEATURES
• Rugged 14 gauge steel back box with1⁄16” front cover
• Compatible with FSR’s IPS inserts• Can be installed in new or old work(mounting adapters included)
• AC and low voltage back box included• Connectors are hidden behind an attractive cover• Multiple knockouts in a variety of sizes• UL listed AC back box provided
APPLICATIONSAPPLICATIONS
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums• Schools • General Meeting Facilities • Airports • Arenas
ORDERING INFORMATIONORDERING INFORMATIONPWB-100-WHT = White CoverPWB-100-BLK = Black Cover
With Cover Without Cover
Nowwith three
“block off” platesand one grommet
included!
PWB-100
PWB-100 ACCESSORIESPWB-100 ACCESSORIES
IPS Audio/Video Inserts
AC Receptacle Accessories
IPS Blank Inserts
IPS Audio Inserts
IPS Video Inserts
IPS Voice/Data Inserts
Control Inserts
PWB-100
TYPICAL INSTALLATIONSTYPICAL INSTALLATIONS
PWB-100 BOX
STUD
(2) STUD BRACKET (2 - #6-32 x 1/4" PAN HEAD SCREWS)
COVER (4 PAINTED#6-32 x 3/4" OVALHEAD SCREWS)
1/2" - 5/8" WALLTHICKNESS
NEW WORK INSTALLATION WALL OPENING: 11" x 5-1/4"
SHOWN WITH ACCESSORY LOW-VOLTAGE CONDUIT ENTRY BOX (2 - #6-32 x 1/4" PAN HEAD SCREWS)
STUD MOUNTINGHARDWARE BYCUSTOMER(#6 SCREW,1/2"x1" STAPLE,OR NAIL)
16" STUD CENTERS
MOUNTING HOLESFOR 1/2" DRYWALL MOUNTING HOLES
FOR 5/8" DRYWALL
OLD WORK INSTALLATIONWALL OPENING: 11" x 5-1/4"
ROTATE PWB-100BOX INTO OPENING
(2) MADISON CLIP
(2) SURFACE MOUNTING IN-STOP BRACKET (3 - #6-32 x 1/4" UNDERCUT FLAT HEAD SCREWS)
WALL OPENING
DIRECT-TO-STUDMOUNTING HOLES
SHOWN WITH ACCESSORY LOW-VOLTAGE CONDUIT ENTRY
BOX (2 - #6-32 x 1/4" PAN HEAD SCREWS)
AC OUTLET BOX (4 - #6-32 x 1/4" PAN HEAD SCREWS)
AC OUTLET BOX (4 - #6-32 x 1/4" PAN HEAD SCREWS)
COVER CENTER SECTION (2 - #6-32 x 1/2" UNDERCUT FLAT HEAD SCREWS)
(3) BLOCK-OFF PANEL (2 - #6-32 x 1/4" PAN HEAD SCREWS)
COVER (4 PAINTED#6-32 x 3/4" OVALHEAD SCREWS)
(3) BLOCK-OFF PANEL (2 - #6-32 x 1/4" PAN HEAD SCREWS)
COVER CENTER SECTION (2 - #6-32 x 1/2" UNDERCUT FLAT HEAD SCREWS)
244 Bergen Boulevard, Woodland Park, NJ 07424 Phone: 973.785.4347 · Fax: 973.785.4207Web: www.fsrinc.com · E-mail: [email protected]
pwb-100
PWB-100 OVERALL DIMENSIONSPWB-100 OVERALL DIMENSIONS
OTHER FSR PRODUCT OFFERINGSOTHER FSR PRODUCT OFFERINGS
VIEW "A"
3.6310.94
BLOCK-OFF PANEL (3 INCLUDED)WITH GROMMET (1 INCLUDED)
AC OUTLET BOX(1 INCLUDED)
LOW-VOLTAGE ENTRYBOX (1 INCLUDED)
LOW-VOLTAGE ENTRYBOX AND AC OUTLETBOX MAY BE MOUNTEDON TOP OR BOTTOM
VIEW "A"
WALL MOUNTEDSURFACE
3.55 FROM WALLMOUNTED SURFACE
CL
4.40
4.771.79
2.16
1.42.58
OPPOSITE SIDE IS MIRROR IMAGEPWB-100 BOX CAN BE ROTATED 180° TO
POSITION AC OPENING ON LEFT OR RIGHT SIDE
7.02
5.23
7.39
CL
(8) 1/2" KNOCKOUTS
1" & 1-1/4"KNOCKOUT
1/2" & 3/4"KNOCKOUT
1/2" & 3/4"KNOCKOUT
AC OUTLET OPENING
IPS INSERT OPENING
1" x 2" OVAL KNOCKOUT CENTERED ON BLOCK-OFF PANEL
The Intelligent Plate Solution (IPS) line is a wide variety of inter-connect solutions to satisfy any AV interface application.Create unlimited combinations of connector inserts with thisdiverse assortment of sleek wall plate and under table mount-ing styles. Customize your table, wall or floor box with our IPSplates.
FSR addresses the rising issue of network security with the newseries of locking wall boxes. With 18 different models, every-thing from recessed to surface mounts are available for new orexisting construction. Store any wall plate or connections safe-ly and securely.
IPS-WP2Q-WHT (populated)
WB-PR26 (populated)MADE INTHE USA
Specifications are subject tochange without notice.